| # DJGPP specific configuration file. |
| # Sed script for additional DJGPP specific editing |
| # of the configure script generated by autoconf 2.60. |
| |
| |
| # Additional editing of Makefiles |
| /^".*ac_file_inputs.*tmp\/out$/ a\ |
| cat > "$tmp/subs-3.sed" << eof_djgpp\ |
| # DJGPP specific Makefile changes.\ |
| s,\\.deps,_deps,g\ |
| s,\\.libs,_libs,g\ |
| s,\\.new\\.,_new.,g\ |
| s,\\.old\\.,_old.,g\ |
| s,\\.tab\\.,_tab.,g\ |
| s,config\\.h\\.in,config.h-in,g\ |
| s,\\.\\([1-9]\\)\\.html,.\\1-html,g\ |
| s,\\.html,-html,g\ |
| s,libcharset\\.h\\.in,libcharset.h-in,g\ |
| s,localcharset\\.h\\.inst,localcharset_h.ins,g\ |
| s,localcharset\\.h\\.in,localcharset.h-in,g\ |
| s,localcharset\\.h\\.build\\.in,localcharset.h-build-in,g\ |
| s,Makefile\\.am\\.in,Makefile.am-in,g\ |
| s,Makefile\\.in\\.in,Makefile.in-in,g\ |
| /^\\.y\\.c:/,/^$/ {\ |
| /\\\$(YACCCOMPILE)/ {\ |
| a\\\\\ |
| -@test -f y.tab.c && mv -f y.tab.c y_tab.c\\\\\ |
| -@test -f y.tab.h && mv -f y.tab.h y_tab.h\ |
| }\ |
| }\ |
| eof_djgpp\ |
| sed -f "\$tmp/subs-3.sed" \$tmp/out > \$tmp/out.djgpp\ |
| mv -f \$tmp/out.djgpp \$tmp/out |
| |
| |
| # Rename config.h.in into config.h-in |
| /ac_config_headers=/s|config\.h|&:config.h-in|g |
| /CONFIG_HEADERS=/ s|config\.h\.in|&:config.h-in|2 |
| |
| # Rename localcharset.h.build.in, localcharset.h.inst, localcharset.h.in and Makefile.in.in into localcharset.h-build-in, localcharset_h.ins, localcharset.h-in and Makefile.in-in |
| /ac_config_files=/ { |
| s|localcharset\.h\.build\.in|localcharset.h-build-in| |
| s|localcharset\.h\.inst|localcharset_h.ins| |
| s|localcharset\.h\.in|localcharset.h-in| |
| s|po/Makefile\.in|&:po/Makefile.in-in| |
| } |
| /CONFIG_FILES=/ { |
| s|localcharset\.h\.build\.in|localcharset.h-build-in| |
| s|localcharset\.h\.inst|localcharset_h.ins| |
| s|localcharset\.h\.in|localcharset.h-in| |
| s|po/Makefile\.in|&:po/Makefile.in-in|2 |
| } |
| |
| |
| # We always use _deps and _libs instead of .deps and .libs, because |
| # the latter is an invalid name on 8+3 MS-DOS file system. This makes |
| # the generated Makefiles good for every DJGPP installation, not only |
| # the one where the package was configured (which could happen to be |
| # a Windows box, where leading dots in file names are allowed). |
| s,\.deps,_deps,g |
| s,\.libs,_libs,g |
| /^rmdir[ ]*\.tst/ i\ |
| am__leading_dot=_ |
| |
| # Replace (command) > /dev/null with `command > /dev/null`, since |
| # parenthesized commands always return zero status in the ported Bash, |
| # even if the named command doesn't exist |
| /if ([^|;`]*null/{ |
| s,(,`, |
| s,),, |
| /null[ ]*2>&1/ s,2>&1,&`, |
| /null.*null/ s,null.*null,&`, |
| /null.*null/ !{ |
| /null[ ]*2>&1/ !s,null,&`, |
| } |
| } |
| |
| # DOS-style absolute file names should be supported as well |
| /\*) top_srcdir=/s,/\*,[\\\\/]* | ?:[\\\\/]*, |
| |
| # The following two items are changes needed for configuring |
| # and compiling across partitions. |
| # 1) The given srcdir value is always translated from the |
| # "x:" syntax into "/dev/x" syntax while we run configure. |
| /^[ ]*-srcdir=\*.*$/ a\ |
| ac_optarg=`echo "$ac_optarg" | sed "s,^\\([A-Za-z]\\):,/dev/\\1,"` |
| /set X `ls -Lt \$srcdir/ i\ |
| if `echo $srcdir | grep "^/dev/" - > /dev/null`; then\ |
| srcdir=`echo "$srcdir" | sed -e "s%^/dev/%%" -e "s%/%:/%"`\ |
| fi |
| |
| # Autoconf 2.52e generated configure scripts |
| # write absolute paths into Makefiles and bison.in |
| # making them useless for DJGPP installations for |
| # which the package has not been configured for. |
| /MISSING=/,/^$/ { |
| /^fi$/ a\ |
| am_missing_run=`echo "$am_missing_run" | sed 's%/dev/.*/libcharset[-_0-9]\\{1,1\\}[-.0-9A-Za-z+]*%${top_srcdir}%;s%.:.*/libcharset[-_0-9]\\{1,1\\}[-.0-9A-Za-z+]*%${top_srcdir}%'` |
| } |
| /^install_sh=/a\ |
| install_sh=`echo "$install_sh" | sed 's%/dev/.*/libcharset[-_0-9]\\{1,1\\}[-.0-9A-Za-z+]*%${top_srcdir}%;s%.:.*/libcharset[-_0-9]\\{1,1\\}[-.0-9A-Za-z+]*%${top_srcdir}%'` |
| |
| # This will only work if the assumption that the |
| # testsuite is ran from the following path: |
| # ${top_srcdir}/tests/testsuite.dir |
| # holds. The explicit names are of no importance. |
| # ../../. == ${top_srcdir} |
| #/^esac$/,/^ac_abs_srcdir=/ { |
| /^ac_abs_srcdir=/ i\ |
| ac_abs_builddir=`echo "$ac_abs_builddir" | sed "s%/dev/.*/libcharset[-_0-9]\\{1,1\\}[-.0-9A-Za-z+]*%../../.%;s%.:.*/libcharset[-_0-9]\\{1,1\\}[-.0-9A-Za-z+]*%../../.%"`\ |
| ac_abs_top_builddir=`echo "$ac_abs_top_builddir" | sed "s%/dev/.*/libcharset[-_0-9]\\{1,1\\}[-.0-9A-Za-z+]*%../../..%;s%.:.*/libcharset[-_0-9]\\{1,1\\}[-.0-9A-Za-z+]*%../../..%"`\ |
| ac_abs_top_srcdir=`echo "$ac_abs_top_srcdir" | sed "s%/dev/.*/libcharset[-_0-9]\\{1,1\\}[-.0-9A-Za-z+]*%../../..%;s%.:.*/libcharset[-_0-9]\\{1,1\\}[-.0-9A-Za-z+]*%../../..%"` |
| #ac_abs_srcdir=`echo "$ac_abs_srcdir" | sed "s%/dev/.*/libcharset[-_0-9]\\{1,1\\}[-.0-9A-Za-z+]*%../../.%;s%.:.*/libcharset[-_0-9]\\{1,1\\}[-.0-9A-Za-z+]*%../../.%"` |
| /^ac_abs_srcdir=/ a\ |
| for dj_dir in $ac_abs_builddir $ac_abs_top_builddir $ac_abs_top_srcdir $ac_abs_srcdir\ |
| do\ |
| ac_abs_builddir=`echo "$ac_abs_builddir" | sed "s%//%/%g"`\ |
| ac_abs_top_builddir=`echo "$ac_abs_top_builddir" | sed "s%//%/%g"`\ |
| ac_abs_top_srcdir=`echo "$ac_abs_top_srcdir" | sed "s%//%/%g"`\ |
| ac_abs_srcdir=`echo "$ac_abs_srcdir" | sed "s%//%/%g"`\ |
| done |
| |
| # Add DJGPP version information. |
| /^#define VERSION/ s/\$VERSION/& (DJGPP port (r1))/ |
| |
| # We need makeinfo to make the html formated docs. |
| /\$am_missing_run[ ]*makeinfo/ s,\$am_missing_run,, |
| |
| # The path to the FORTRAN compiler and libraries |
| # shall contain no absolute path reference so it |
| # will be good for all djgpp installations. |
| /^FLIBS="\$ac_cv_flibs"/ i\ |
| ac_djgpp_path=`echo "$DJDIR" | sed 's%\\\\\\%/%g' | tr $as_cr_LETTERS $as_cr_letters`\ |
| ac_cv_flibs=`echo "$ac_cv_flibs" | sed "s%-L$ac_djgpp_path%-L/dev/env/DJDIR%g"` |
| |
| # Autoconf generated configure scripts write absolute |
| # paths of certain header files into Makefiles making |
| # them useless for DJGPP installations for which the |
| # package has not been configured for. |
| /^.*echo "\$as_me:\$LINENO: result: \$gl_cv_absolute_.*$/ { |
| h |
| s,^.*\(gl_cv_absolute_\)\([a-z0-9_]*\)\(_h\).*$,\1\2\3=`echo $\1\2\3 | sed "s%[^:]:.*/include/%/dev/env/DJDIR/include/%"`, |
| G |
| } |
| /^.*echo "\$as_me:\$LINENO: result: \$gl_cv_full_.*$/ { |
| h |
| s,^.*\(gl_cv_full_\)\([a-z0-9_]*\)\(_h\).*$,\1\2\3=`echo $\1\2\3 | sed "s%[^:]:.*/include/%/dev/env/DJDIR/include/%"`, |
| G |
| } |