blob: 99ac492967d409a61d85c1d752373163fd798cd7 [file] [log] [blame]
/*
* Copyright 2006 The Android Open Source Project
*
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*/
#include "SkPath.h"
#include "SkBuffer.h"
#include "SkCubicClipper.h"
#include "SkData.h"
#include "SkGeometry.h"
#include "SkMacros.h"
#include "SkMath.h"
#include "SkMatrixPriv.h"
#include "SkPathPriv.h"
#include "SkPathRef.h"
#include "SkPointPriv.h"
#include "SkRRect.h"
#include "SkSafeMath.h"
#include "SkTo.h"
#include <cmath>
#include <utility>
static float poly_eval(float A, float B, float C, float t) {
return (A * t + B) * t + C;
}
static float poly_eval(float A, float B, float C, float D, float t) {
return ((A * t + B) * t + C) * t + D;
}
////////////////////////////////////////////////////////////////////////////
/**
* Path.bounds is defined to be the bounds of all the control points.
* If we called bounds.join(r) we would skip r if r was empty, which breaks
* our promise. Hence we have a custom joiner that doesn't look at emptiness
*/
static void joinNoEmptyChecks(SkRect* dst, const SkRect& src) {
dst->fLeft = SkMinScalar(dst->fLeft, src.fLeft);
dst->fTop = SkMinScalar(dst->fTop, src.fTop);
dst->fRight = SkMaxScalar(dst->fRight, src.fRight);
dst->fBottom = SkMaxScalar(dst->fBottom, src.fBottom);
}
static bool is_degenerate(const SkPath& path) {
SkPath::Iter iter(path, false);
SkPoint pts[4];
return SkPath::kDone_Verb == iter.next(pts);
}
class SkAutoDisableDirectionCheck {
public:
SkAutoDisableDirectionCheck(SkPath* path) : fPath(path) {
fSaved = static_cast<SkPathPriv::FirstDirection>(fPath->fFirstDirection.load());
}
~SkAutoDisableDirectionCheck() {
fPath->fFirstDirection = fSaved;
}
private:
SkPath* fPath;
SkPathPriv::FirstDirection fSaved;
};
#define SkAutoDisableDirectionCheck(...) SK_REQUIRE_LOCAL_VAR(SkAutoDisableDirectionCheck)
/* This guy's constructor/destructor bracket a path editing operation. It is
used when we know the bounds of the amount we are going to add to the path
(usually a new contour, but not required).
It captures some state about the path up front (i.e. if it already has a
cached bounds), and then if it can, it updates the cache bounds explicitly,
avoiding the need to revisit all of the points in getBounds().
It also notes if the path was originally degenerate, and if so, sets
isConvex to true. Thus it can only be used if the contour being added is
convex.
*/
class SkAutoPathBoundsUpdate {
public:
SkAutoPathBoundsUpdate(SkPath* path, const SkRect& r) : fRect(r) {
this->init(path);
}
SkAutoPathBoundsUpdate(SkPath* path, SkScalar left, SkScalar top,
SkScalar right, SkScalar bottom) {
fRect.set(left, top, right, bottom);
this->init(path);
}
~SkAutoPathBoundsUpdate() {
fPath->setConvexity(fDegenerate ? SkPath::kConvex_Convexity
: SkPath::kUnknown_Convexity);
if ((fEmpty || fHasValidBounds) && fRect.isFinite()) {
fPath->setBounds(fRect);
}
}
private:
SkPath* fPath;
SkRect fRect;
bool fHasValidBounds;
bool fDegenerate;
bool fEmpty;
void init(SkPath* path) {
// Cannot use fRect for our bounds unless we know it is sorted
fRect.sort();
fPath = path;
// Mark the path's bounds as dirty if (1) they are, or (2) the path
// is non-finite, and therefore its bounds are not meaningful
fHasValidBounds = path->hasComputedBounds() && path->isFinite();
fEmpty = path->isEmpty();
if (fHasValidBounds && !fEmpty) {
joinNoEmptyChecks(&fRect, fPath->getBounds());
}
fDegenerate = is_degenerate(*path);
}
};
#define SkAutoPathBoundsUpdate(...) SK_REQUIRE_LOCAL_VAR(SkAutoPathBoundsUpdate)
////////////////////////////////////////////////////////////////////////////
/*
Stores the verbs and points as they are given to us, with exceptions:
- we only record "Close" if it was immediately preceeded by Move | Line | Quad | Cubic
- we insert a Move(0,0) if Line | Quad | Cubic is our first command
The iterator does more cleanup, especially if forceClose == true
1. If we encounter degenerate segments, remove them
2. if we encounter Close, return a cons'd up Line() first (if the curr-pt != start-pt)
3. if we encounter Move without a preceeding Close, and forceClose is true, goto #2
4. if we encounter Line | Quad | Cubic after Close, cons up a Move
*/
////////////////////////////////////////////////////////////////////////////
// flag to require a moveTo if we begin with something else, like lineTo etc.
#define INITIAL_LASTMOVETOINDEX_VALUE ~0
SkPath::SkPath()
: fPathRef(SkPathRef::CreateEmpty()) {
this->resetFields();
fIsVolatile = false;
fIsBadForDAA = false;
}
void SkPath::resetFields() {
//fPathRef is assumed to have been emptied by the caller.
fLastMoveToIndex = INITIAL_LASTMOVETOINDEX_VALUE;
fFillType = kWinding_FillType;
fConvexity = kUnknown_Convexity;
fFirstDirection = SkPathPriv::kUnknown_FirstDirection;
// We don't touch Android's fSourcePath. It's used to track texture garbage collection, so we
// don't want to muck with it if it's been set to something non-nullptr.
}
SkPath::SkPath(const SkPath& that)
: fPathRef(SkRef(that.fPathRef.get())) {
this->copyFields(that);
SkDEBUGCODE(that.validate();)
}
SkPath::~SkPath() {
SkDEBUGCODE(this->validate();)
}
SkPath& SkPath::operator=(const SkPath& that) {
SkDEBUGCODE(that.validate();)
if (this != &that) {
fPathRef.reset(SkRef(that.fPathRef.get()));
this->copyFields(that);
}
SkDEBUGCODE(this->validate();)
return *this;
}
void SkPath::copyFields(const SkPath& that) {
//fPathRef is assumed to have been set by the caller.
fLastMoveToIndex = that.fLastMoveToIndex;
fFillType = that.fFillType;
fIsVolatile = that.fIsVolatile;
fIsBadForDAA = that.fIsBadForDAA;
// Non-atomic assignment of atomic values.
fConvexity .store(that.fConvexity .load());
fFirstDirection.store(that.fFirstDirection.load());
}
bool operator==(const SkPath& a, const SkPath& b) {
// note: don't need to look at isConvex or bounds, since just comparing the
// raw data is sufficient.
return &a == &b ||
(a.fFillType == b.fFillType && *a.fPathRef.get() == *b.fPathRef.get());
}
void SkPath::swap(SkPath& that) {
if (this != &that) {
using std::swap;
fPathRef.swap(that.fPathRef);
swap(fLastMoveToIndex, that.fLastMoveToIndex);
swap(fFillType, that.fFillType);
swap(fIsVolatile, that.fIsVolatile);
// Non-atomic swaps of atomic values.
Convexity c = fConvexity.load();
fConvexity.store(that.fConvexity.load());
that.fConvexity.store(c);
uint8_t fd = fFirstDirection.load();
fFirstDirection.store(that.fFirstDirection.load());
that.fFirstDirection.store(fd);
}
}
bool SkPath::isInterpolatable(const SkPath& compare) const {
int count = fPathRef->countVerbs();
if (count != compare.fPathRef->countVerbs()) {
return false;
}
if (!count) {
return true;
}
if (memcmp(fPathRef->verbsMemBegin(), compare.fPathRef->verbsMemBegin(),
count)) {
return false;
}
return !fPathRef->countWeights() ||
!SkToBool(memcmp(fPathRef->conicWeights(), compare.fPathRef->conicWeights(),
fPathRef->countWeights() * sizeof(*fPathRef->conicWeights())));
}
bool SkPath::interpolate(const SkPath& ending, SkScalar weight, SkPath* out) const {
int pointCount = fPathRef->countPoints();
if (pointCount != ending.fPathRef->countPoints()) {
return false;
}
if (!pointCount) {
return true;
}
out->reset();
out->addPath(*this);
fPathRef->interpolate(*ending.fPathRef, weight, out->fPathRef.get());
return true;
}
static inline bool check_edge_against_rect(const SkPoint& p0,
const SkPoint& p1,
const SkRect& rect,
SkPathPriv::FirstDirection dir) {
const SkPoint* edgeBegin;
SkVector v;
if (SkPathPriv::kCW_FirstDirection == dir) {
v = p1 - p0;
edgeBegin = &p0;
} else {
v = p0 - p1;
edgeBegin = &p1;
}
if (v.fX || v.fY) {
// check the cross product of v with the vec from edgeBegin to each rect corner
SkScalar yL = v.fY * (rect.fLeft - edgeBegin->fX);
SkScalar xT = v.fX * (rect.fTop - edgeBegin->fY);
SkScalar yR = v.fY * (rect.fRight - edgeBegin->fX);
SkScalar xB = v.fX * (rect.fBottom - edgeBegin->fY);
if ((xT < yL) || (xT < yR) || (xB < yL) || (xB < yR)) {
return false;
}
}
return true;
}
bool SkPath::conservativelyContainsRect(const SkRect& rect) const {
// This only handles non-degenerate convex paths currently.
if (kConvex_Convexity != this->getConvexity()) {
return false;
}
SkPathPriv::FirstDirection direction;
if (!SkPathPriv::CheapComputeFirstDirection(*this, &direction)) {
return false;
}
SkPoint firstPt;
SkPoint prevPt;
SkPath::Iter iter(*this, true);
SkPath::Verb verb;
SkPoint pts[4];
int segmentCount = 0;
SkDEBUGCODE(int moveCnt = 0;)
SkDEBUGCODE(int closeCount = 0;)
while ((verb = iter.next(pts, true, true)) != kDone_Verb) {
int nextPt = -1;
switch (verb) {
case kMove_Verb:
SkASSERT(!segmentCount && !closeCount);
SkDEBUGCODE(++moveCnt);
firstPt = prevPt = pts[0];
break;
case kLine_Verb:
nextPt = 1;
SkASSERT(moveCnt && !closeCount);
++segmentCount;
break;
case kQuad_Verb:
case kConic_Verb:
SkASSERT(moveCnt && !closeCount);
++segmentCount;
nextPt = 2;
break;
case kCubic_Verb:
SkASSERT(moveCnt && !closeCount);
++segmentCount;
nextPt = 3;
break;
case kClose_Verb:
SkDEBUGCODE(++closeCount;)
break;
default:
SkDEBUGFAIL("unknown verb");
}
if (-1 != nextPt) {
if (SkPath::kConic_Verb == verb) {
SkConic orig;
orig.set(pts, iter.conicWeight());
SkPoint quadPts[5];
int count = orig.chopIntoQuadsPOW2(quadPts, 1);
SkASSERT_RELEASE(2 == count);
if (!check_edge_against_rect(quadPts[0], quadPts[2], rect, direction)) {
return false;
}
if (!check_edge_against_rect(quadPts[2], quadPts[4], rect, direction)) {
return false;
}
} else {
if (!check_edge_against_rect(prevPt, pts[nextPt], rect, direction)) {
return false;
}
}
prevPt = pts[nextPt];
}
}
if (segmentCount) {
return check_edge_against_rect(prevPt, firstPt, rect, direction);
}
return false;
}
uint32_t SkPath::getGenerationID() const {
uint32_t genID = fPathRef->genID();
#ifdef SK_BUILD_FOR_ANDROID_FRAMEWORK
SkASSERT((unsigned)fFillType < (1 << (32 - SkPathPriv::kPathRefGenIDBitCnt)));
genID |= static_cast<uint32_t>(fFillType) << SkPathPriv::kPathRefGenIDBitCnt;
#endif
return genID;
}
void SkPath::reset() {
SkDEBUGCODE(this->validate();)
fPathRef.reset(SkPathRef::CreateEmpty());
this->resetFields();
}
void SkPath::rewind() {
SkDEBUGCODE(this->validate();)
SkPathRef::Rewind(&fPathRef);
this->resetFields();
}
bool SkPath::isLastContourClosed() const {
int verbCount = fPathRef->countVerbs();
if (0 == verbCount) {
return false;
}
return kClose_Verb == fPathRef->atVerb(verbCount - 1);
}
bool SkPath::isLine(SkPoint line[2]) const {
int verbCount = fPathRef->countVerbs();
if (2 == verbCount) {
SkASSERT(kMove_Verb == fPathRef->atVerb(0));
if (kLine_Verb == fPathRef->atVerb(1)) {
SkASSERT(2 == fPathRef->countPoints());
if (line) {
const SkPoint* pts = fPathRef->points();
line[0] = pts[0];
line[1] = pts[1];
}
return true;
}
}
return false;
}
/*
Determines if path is a rect by keeping track of changes in direction
and looking for a loop either clockwise or counterclockwise.
The direction is computed such that:
0: vertical up
1: horizontal left
2: vertical down
3: horizontal right
A rectangle cycles up/right/down/left or up/left/down/right.
The test fails if:
The path is closed, and followed by a line.
A second move creates a new endpoint.
A diagonal line is parsed.
There's more than four changes of direction.
There's a discontinuity on the line (e.g., a move in the middle)
The line reverses direction.
The path contains a quadratic or cubic.
The path contains fewer than four points.
*The rectangle doesn't complete a cycle.
*The final point isn't equal to the first point.
*These last two conditions we relax if we have a 3-edge path that would
form a rectangle if it were closed (as we do when we fill a path)
It's OK if the path has:
Several colinear line segments composing a rectangle side.
Single points on the rectangle side.
The direction takes advantage of the corners found since opposite sides
must travel in opposite directions.
FIXME: Allow colinear quads and cubics to be treated like lines.
FIXME: If the API passes fill-only, return true if the filled stroke
is a rectangle, though the caller failed to close the path.
directions values:
0x1 is set if the segment is horizontal
0x2 is set if the segment is moving to the right or down
thus:
two directions are opposites iff (dirA ^ dirB) == 0x2
two directions are perpendicular iff (dirA ^ dirB) == 0x1
*/
static int rect_make_dir(SkScalar dx, SkScalar dy) {
return ((0 != dx) << 0) | ((dx > 0 || dy > 0) << 1);
}
bool SkPath::isRectContour(bool allowPartial, int* currVerb, const SkPoint** ptsPtr,
bool* isClosed, Direction* direction, SkRect* rect) const {
int corners = 0;
SkPoint closeXY; // used to determine if final line falls on a diagonal
SkPoint lineStart; // used to construct line from previous point
const SkPoint* firstPt = nullptr; // first point in the rect (last of first moves)
const SkPoint* lastPt = nullptr; // last point in the rect (last of lines or first if closed)
SkPoint firstCorner;
SkPoint thirdCorner;
const SkPoint* pts = *ptsPtr;
const SkPoint* savePts = nullptr; // used to allow caller to iterate through a pair of rects
lineStart.set(0, 0);
signed char directions[] = {-1, -1, -1, -1, -1}; // -1 to 3; -1 is uninitialized
bool closedOrMoved = false;
bool autoClose = false;
bool insertClose = false;
int verbCnt = fPathRef->countVerbs();
while (*currVerb < verbCnt && (!allowPartial || !autoClose)) {
uint8_t verb = insertClose ? (uint8_t) kClose_Verb : fPathRef->atVerb(*currVerb);
switch (verb) {
case kClose_Verb:
savePts = pts;
autoClose = true;
insertClose = false;
case kLine_Verb: {
if (kClose_Verb != verb) {
lastPt = pts;
}
SkPoint lineEnd = kClose_Verb == verb ? *firstPt : *pts++;
SkVector lineDelta = lineEnd - lineStart;
if (lineDelta.fX && lineDelta.fY) {
return false; // diagonal
}
if (!lineDelta.isFinite()) {
return false; // path contains infinity or NaN
}
if (lineStart == lineEnd) {
break; // single point on side OK
}
int nextDirection = rect_make_dir(lineDelta.fX, lineDelta.fY); // 0 to 3
if (0 == corners) {
directions[0] = nextDirection;
corners = 1;
closedOrMoved = false;
lineStart = lineEnd;
break;
}
if (closedOrMoved) {
return false; // closed followed by a line
}
if (autoClose && nextDirection == directions[0]) {
break; // colinear with first
}
closedOrMoved = autoClose;
if (directions[corners - 1] == nextDirection) {
if (3 == corners && kLine_Verb == verb) {
thirdCorner = lineEnd;
}
lineStart = lineEnd;
break; // colinear segment
}
directions[corners++] = nextDirection;
// opposite lines must point in opposite directions; xoring them should equal 2
switch (corners) {
case 2:
firstCorner = lineStart;
break;
case 3:
if ((directions[0] ^ directions[2]) != 2) {
return false;
}
thirdCorner = lineEnd;
break;
case 4:
if ((directions[1] ^ directions[3]) != 2) {
return false;
}
break;
default:
return false; // too many direction changes
}
lineStart = lineEnd;
break;
}
case kQuad_Verb:
case kConic_Verb:
case kCubic_Verb:
return false; // quadratic, cubic not allowed
case kMove_Verb:
if (allowPartial && !autoClose && directions[0] >= 0) {
insertClose = true;
*currVerb -= 1; // try move again afterwards
goto addMissingClose;
}
if (!corners) {
firstPt = pts;
} else {
closeXY = *firstPt - *lastPt;
if (closeXY.fX && closeXY.fY) {
return false; // we're diagonal, abort
}
}
lineStart = *pts++;
closedOrMoved = true;
break;
default:
SkDEBUGFAIL("unexpected verb");
break;
}
*currVerb += 1;
addMissingClose:
;
}
// Success if 4 corners and first point equals last
if (corners < 3 || corners > 4) {
return false;
}
if (savePts) {
*ptsPtr = savePts;
}
// check if close generates diagonal
closeXY = *firstPt - *lastPt;
if (closeXY.fX && closeXY.fY) {
return false;
}
if (rect) {
rect->set(firstCorner, thirdCorner);
}
if (isClosed) {
*isClosed = autoClose;
}
if (direction) {
*direction = directions[0] == ((directions[1] + 1) & 3) ? kCW_Direction : kCCW_Direction;
}
return true;
}
bool SkPath::isRect(SkRect* rect, bool* isClosed, Direction* direction) const {
SkDEBUGCODE(this->validate();)
int currVerb = 0;
const SkPoint* pts = fPathRef->points();
return this->isRectContour(false, &currVerb, &pts, isClosed, direction, rect);
}
bool SkPath::isNestedFillRects(SkRect rects[2], Direction dirs[2]) const {
SkDEBUGCODE(this->validate();)
int currVerb = 0;
const SkPoint* pts = fPathRef->points();
Direction testDirs[2];
SkRect testRects[2];
if (!isRectContour(true, &currVerb, &pts, nullptr, &testDirs[0], &testRects[0])) {
return false;
}
if (isRectContour(false, &currVerb, &pts, nullptr, &testDirs[1], &testRects[1])) {
if (testRects[0].contains(testRects[1])) {
if (rects) {
rects[0] = testRects[0];
rects[1] = testRects[1];
}
if (dirs) {
dirs[0] = testDirs[0];
dirs[1] = testDirs[1];
}
return true;
}
if (testRects[1].contains(testRects[0])) {
if (rects) {
rects[0] = testRects[1];
rects[1] = testRects[0];
}
if (dirs) {
dirs[0] = testDirs[1];
dirs[1] = testDirs[0];
}
return true;
}
}
return false;
}
bool SkPath::isOval(SkRect* bounds) const {
return SkPathPriv::IsOval(*this, bounds, nullptr, nullptr);
}
bool SkPath::isRRect(SkRRect* rrect) const {
return SkPathPriv::IsRRect(*this, rrect, nullptr, nullptr);
}
int SkPath::countPoints() const {
return fPathRef->countPoints();
}
int SkPath::getPoints(SkPoint dst[], int max) const {
SkDEBUGCODE(this->validate();)
SkASSERT(max >= 0);
SkASSERT(!max || dst);
int count = SkMin32(max, fPathRef->countPoints());
sk_careful_memcpy(dst, fPathRef->points(), count * sizeof(SkPoint));
return fPathRef->countPoints();
}
SkPoint SkPath::getPoint(int index) const {
if ((unsigned)index < (unsigned)fPathRef->countPoints()) {
return fPathRef->atPoint(index);
}
return SkPoint::Make(0, 0);
}
int SkPath::countVerbs() const {
return fPathRef->countVerbs();
}
static inline void copy_verbs_reverse(uint8_t* inorderDst,
const uint8_t* reversedSrc,
int count) {
for (int i = 0; i < count; ++i) {
inorderDst[i] = reversedSrc[~i];
}
}
int SkPath::getVerbs(uint8_t dst[], int max) const {
SkDEBUGCODE(this->validate();)
SkASSERT(max >= 0);
SkASSERT(!max || dst);
int count = SkMin32(max, fPathRef->countVerbs());
copy_verbs_reverse(dst, fPathRef->verbs(), count);
return fPathRef->countVerbs();
}
bool SkPath::getLastPt(SkPoint* lastPt) const {
SkDEBUGCODE(this->validate();)
int count = fPathRef->countPoints();
if (count > 0) {
if (lastPt) {
*lastPt = fPathRef->atPoint(count - 1);
}
return true;
}
if (lastPt) {
lastPt->set(0, 0);
}
return false;
}
void SkPath::setPt(int index, SkScalar x, SkScalar y) {
SkDEBUGCODE(this->validate();)
int count = fPathRef->countPoints();
if (count <= index) {
return;
} else {
SkPathRef::Editor ed(&fPathRef);
ed.atPoint(index)->set(x, y);
}
}
void SkPath::setLastPt(SkScalar x, SkScalar y) {
SkDEBUGCODE(this->validate();)
int count = fPathRef->countPoints();
if (count == 0) {
this->moveTo(x, y);
} else {
SkPathRef::Editor ed(&fPathRef);
ed.atPoint(count-1)->set(x, y);
}
}
void SkPath::setConvexity(Convexity c) {
if (fConvexity != c) {
fConvexity = c;
}
}
//////////////////////////////////////////////////////////////////////////////
// Construction methods
#define DIRTY_AFTER_EDIT \
do { \
fConvexity = kUnknown_Convexity; \
fFirstDirection = SkPathPriv::kUnknown_FirstDirection; \
} while (0)
void SkPath::incReserve(U16CPU inc) {
SkDEBUGCODE(this->validate();)
SkPathRef::Editor(&fPathRef, inc, inc);
SkDEBUGCODE(this->validate();)
}
void SkPath::moveTo(SkScalar x, SkScalar y) {
SkDEBUGCODE(this->validate();)
SkPathRef::Editor ed(&fPathRef);
// remember our index
fLastMoveToIndex = fPathRef->countPoints();
ed.growForVerb(kMove_Verb)->set(x, y);
DIRTY_AFTER_EDIT;
}
void SkPath::rMoveTo(SkScalar x, SkScalar y) {
SkPoint pt;
this->getLastPt(&pt);
this->moveTo(pt.fX + x, pt.fY + y);
}
void SkPath::injectMoveToIfNeeded() {
if (fLastMoveToIndex < 0) {
SkScalar x, y;
if (fPathRef->countVerbs() == 0) {
x = y = 0;
} else {
const SkPoint& pt = fPathRef->atPoint(~fLastMoveToIndex);
x = pt.fX;
y = pt.fY;
}
this->moveTo(x, y);
}
}
void SkPath::lineTo(SkScalar x, SkScalar y) {
SkDEBUGCODE(this->validate();)
this->injectMoveToIfNeeded();
SkPathRef::Editor ed(&fPathRef);
ed.growForVerb(kLine_Verb)->set(x, y);
DIRTY_AFTER_EDIT;
}
void SkPath::rLineTo(SkScalar x, SkScalar y) {
this->injectMoveToIfNeeded(); // This can change the result of this->getLastPt().
SkPoint pt;
this->getLastPt(&pt);
this->lineTo(pt.fX + x, pt.fY + y);
}
void SkPath::quadTo(SkScalar x1, SkScalar y1, SkScalar x2, SkScalar y2) {
SkDEBUGCODE(this->validate();)
this->injectMoveToIfNeeded();
SkPathRef::Editor ed(&fPathRef);
SkPoint* pts = ed.growForVerb(kQuad_Verb);
pts[0].set(x1, y1);
pts[1].set(x2, y2);
DIRTY_AFTER_EDIT;
}
void SkPath::rQuadTo(SkScalar x1, SkScalar y1, SkScalar x2, SkScalar y2) {
this->injectMoveToIfNeeded(); // This can change the result of this->getLastPt().
SkPoint pt;
this->getLastPt(&pt);
this->quadTo(pt.fX + x1, pt.fY + y1, pt.fX + x2, pt.fY + y2);
}
void SkPath::conicTo(SkScalar x1, SkScalar y1, SkScalar x2, SkScalar y2,
SkScalar w) {
// check for <= 0 or NaN with this test
if (!(w > 0)) {
this->lineTo(x2, y2);
} else if (!SkScalarIsFinite(w)) {
this->lineTo(x1, y1);
this->lineTo(x2, y2);
} else if (SK_Scalar1 == w) {
this->quadTo(x1, y1, x2, y2);
} else {
SkDEBUGCODE(this->validate();)
this->injectMoveToIfNeeded();
SkPathRef::Editor ed(&fPathRef);
SkPoint* pts = ed.growForVerb(kConic_Verb, w);
pts[0].set(x1, y1);
pts[1].set(x2, y2);
DIRTY_AFTER_EDIT;
}
}
void SkPath::rConicTo(SkScalar dx1, SkScalar dy1, SkScalar dx2, SkScalar dy2,
SkScalar w) {
this->injectMoveToIfNeeded(); // This can change the result of this->getLastPt().
SkPoint pt;
this->getLastPt(&pt);
this->conicTo(pt.fX + dx1, pt.fY + dy1, pt.fX + dx2, pt.fY + dy2, w);
}
void SkPath::cubicTo(SkScalar x1, SkScalar y1, SkScalar x2, SkScalar y2,
SkScalar x3, SkScalar y3) {
SkDEBUGCODE(this->validate();)
this->injectMoveToIfNeeded();
SkPathRef::Editor ed(&fPathRef);
SkPoint* pts = ed.growForVerb(kCubic_Verb);
pts[0].set(x1, y1);
pts[1].set(x2, y2);
pts[2].set(x3, y3);
DIRTY_AFTER_EDIT;
}
void SkPath::rCubicTo(SkScalar x1, SkScalar y1, SkScalar x2, SkScalar y2,
SkScalar x3, SkScalar y3) {
this->injectMoveToIfNeeded(); // This can change the result of this->getLastPt().
SkPoint pt;
this->getLastPt(&pt);
this->cubicTo(pt.fX + x1, pt.fY + y1, pt.fX + x2, pt.fY + y2,
pt.fX + x3, pt.fY + y3);
}
void SkPath::close() {
SkDEBUGCODE(this->validate();)
int count = fPathRef->countVerbs();
if (count > 0) {
switch (fPathRef->atVerb(count - 1)) {
case kLine_Verb:
case kQuad_Verb:
case kConic_Verb:
case kCubic_Verb:
case kMove_Verb: {
SkPathRef::Editor ed(&fPathRef);
ed.growForVerb(kClose_Verb);
break;
}
case kClose_Verb:
// don't add a close if it's the first verb or a repeat
break;
default:
SkDEBUGFAIL("unexpected verb");
break;
}
}
// signal that we need a moveTo to follow us (unless we're done)
#if 0
if (fLastMoveToIndex >= 0) {
fLastMoveToIndex = ~fLastMoveToIndex;
}
#else
fLastMoveToIndex ^= ~fLastMoveToIndex >> (8 * sizeof(fLastMoveToIndex) - 1);
#endif
}
///////////////////////////////////////////////////////////////////////////////
namespace {
template <unsigned N>
class PointIterator {
public:
PointIterator(SkPath::Direction dir, unsigned startIndex)
: fCurrent(startIndex % N)
, fAdvance(dir == SkPath::kCW_Direction ? 1 : N - 1) { }
const SkPoint& current() const {
SkASSERT(fCurrent < N);
return fPts[fCurrent];
}
const SkPoint& next() {
fCurrent = (fCurrent + fAdvance) % N;
return this->current();
}
protected:
SkPoint fPts[N];
private:
unsigned fCurrent;
unsigned fAdvance;
};
class RectPointIterator : public PointIterator<4> {
public:
RectPointIterator(const SkRect& rect, SkPath::Direction dir, unsigned startIndex)
: PointIterator(dir, startIndex) {
fPts[0] = SkPoint::Make(rect.fLeft, rect.fTop);
fPts[1] = SkPoint::Make(rect.fRight, rect.fTop);
fPts[2] = SkPoint::Make(rect.fRight, rect.fBottom);
fPts[3] = SkPoint::Make(rect.fLeft, rect.fBottom);
}
};
class OvalPointIterator : public PointIterator<4> {
public:
OvalPointIterator(const SkRect& oval, SkPath::Direction dir, unsigned startIndex)
: PointIterator(dir, startIndex) {
const SkScalar cx = oval.centerX();
const SkScalar cy = oval.centerY();
fPts[0] = SkPoint::Make(cx, oval.fTop);
fPts[1] = SkPoint::Make(oval.fRight, cy);
fPts[2] = SkPoint::Make(cx, oval.fBottom);
fPts[3] = SkPoint::Make(oval.fLeft, cy);
}
};
class RRectPointIterator : public PointIterator<8> {
public:
RRectPointIterator(const SkRRect& rrect, SkPath::Direction dir, unsigned startIndex)
: PointIterator(dir, startIndex) {
const SkRect& bounds = rrect.getBounds();
const SkScalar L = bounds.fLeft;
const SkScalar T = bounds.fTop;
const SkScalar R = bounds.fRight;
const SkScalar B = bounds.fBottom;
fPts[0] = SkPoint::Make(L + rrect.radii(SkRRect::kUpperLeft_Corner).fX, T);
fPts[1] = SkPoint::Make(R - rrect.radii(SkRRect::kUpperRight_Corner).fX, T);
fPts[2] = SkPoint::Make(R, T + rrect.radii(SkRRect::kUpperRight_Corner).fY);
fPts[3] = SkPoint::Make(R, B - rrect.radii(SkRRect::kLowerRight_Corner).fY);
fPts[4] = SkPoint::Make(R - rrect.radii(SkRRect::kLowerRight_Corner).fX, B);
fPts[5] = SkPoint::Make(L + rrect.radii(SkRRect::kLowerLeft_Corner).fX, B);
fPts[6] = SkPoint::Make(L, B - rrect.radii(SkRRect::kLowerLeft_Corner).fY);
fPts[7] = SkPoint::Make(L, T + rrect.radii(SkRRect::kUpperLeft_Corner).fY);
}
};
} // anonymous namespace
static void assert_known_direction(int dir) {
SkASSERT(SkPath::kCW_Direction == dir || SkPath::kCCW_Direction == dir);
}
void SkPath::addRect(const SkRect& rect, Direction dir) {
this->addRect(rect, dir, 0);
}
void SkPath::addRect(SkScalar left, SkScalar top, SkScalar right,
SkScalar bottom, Direction dir) {
this->addRect(SkRect::MakeLTRB(left, top, right, bottom), dir, 0);
}
void SkPath::addRect(const SkRect &rect, Direction dir, unsigned startIndex) {
assert_known_direction(dir);
fFirstDirection = this->hasOnlyMoveTos() ?
(SkPathPriv::FirstDirection)dir : SkPathPriv::kUnknown_FirstDirection;
SkAutoDisableDirectionCheck addc(this);
SkAutoPathBoundsUpdate apbu(this, rect);
SkDEBUGCODE(int initialVerbCount = this->countVerbs());
const int kVerbs = 5; // moveTo + 3x lineTo + close
this->incReserve(kVerbs);
RectPointIterator iter(rect, dir, startIndex);
this->moveTo(iter.current());
this->lineTo(iter.next());
this->lineTo(iter.next());
this->lineTo(iter.next());
this->close();
SkASSERT(this->countVerbs() == initialVerbCount + kVerbs);
}
void SkPath::addPoly(const SkPoint pts[], int count, bool close) {
SkDEBUGCODE(this->validate();)
if (count <= 0) {
return;
}
fLastMoveToIndex = fPathRef->countPoints();
// +close makes room for the extra kClose_Verb
SkPathRef::Editor ed(&fPathRef, count+close, count);
ed.growForVerb(kMove_Verb)->set(pts[0].fX, pts[0].fY);
if (count > 1) {
SkPoint* p = ed.growForRepeatedVerb(kLine_Verb, count - 1);
memcpy(p, &pts[1], (count-1) * sizeof(SkPoint));
}
if (close) {
ed.growForVerb(kClose_Verb);
fLastMoveToIndex ^= ~fLastMoveToIndex >> (8 * sizeof(fLastMoveToIndex) - 1);
}
DIRTY_AFTER_EDIT;
SkDEBUGCODE(this->validate();)
}
#include "SkGeometry.h"
static bool arc_is_lone_point(const SkRect& oval, SkScalar startAngle, SkScalar sweepAngle,
SkPoint* pt) {
if (0 == sweepAngle && (0 == startAngle || SkIntToScalar(360) == startAngle)) {
// Chrome uses this path to move into and out of ovals. If not
// treated as a special case the moves can distort the oval's
// bounding box (and break the circle special case).
pt->set(oval.fRight, oval.centerY());
return true;
} else if (0 == oval.width() && 0 == oval.height()) {
// Chrome will sometimes create 0 radius round rects. Having degenerate
// quad segments in the path prevents the path from being recognized as
// a rect.
// TODO: optimizing the case where only one of width or height is zero
// should also be considered. This case, however, doesn't seem to be
// as common as the single point case.
pt->set(oval.fRight, oval.fTop);
return true;
}
return false;
}
// Return the unit vectors pointing at the start/stop points for the given start/sweep angles
//
static void angles_to_unit_vectors(SkScalar startAngle, SkScalar sweepAngle,
SkVector* startV, SkVector* stopV, SkRotationDirection* dir) {
startV->fY = SkScalarSinCos(SkDegreesToRadians(startAngle), &startV->fX);
stopV->fY = SkScalarSinCos(SkDegreesToRadians(startAngle + sweepAngle), &stopV->fX);
/* If the sweep angle is nearly (but less than) 360, then due to precision
loss in radians-conversion and/or sin/cos, we may end up with coincident
vectors, which will fool SkBuildQuadArc into doing nothing (bad) instead
of drawing a nearly complete circle (good).
e.g. canvas.drawArc(0, 359.99, ...)
-vs- canvas.drawArc(0, 359.9, ...)
We try to detect this edge case, and tweak the stop vector
*/
if (*startV == *stopV) {
SkScalar sw = SkScalarAbs(sweepAngle);
if (sw < SkIntToScalar(360) && sw > SkIntToScalar(359)) {
SkScalar stopRad = SkDegreesToRadians(startAngle + sweepAngle);
// make a guess at a tiny angle (in radians) to tweak by
SkScalar deltaRad = SkScalarCopySign(SK_Scalar1/512, sweepAngle);
// not sure how much will be enough, so we use a loop
do {
stopRad -= deltaRad;
stopV->fY = SkScalarSinCos(stopRad, &stopV->fX);
} while (*startV == *stopV);
}
}
*dir = sweepAngle > 0 ? kCW_SkRotationDirection : kCCW_SkRotationDirection;
}
/**
* If this returns 0, then the caller should just line-to the singlePt, else it should
* ignore singlePt and append the specified number of conics.
*/
static int build_arc_conics(const SkRect& oval, const SkVector& start, const SkVector& stop,
SkRotationDirection dir, SkConic conics[SkConic::kMaxConicsForArc],
SkPoint* singlePt) {
SkMatrix matrix;
matrix.setScale(SkScalarHalf(oval.width()), SkScalarHalf(oval.height()));
matrix.postTranslate(oval.centerX(), oval.centerY());
int count = SkConic::BuildUnitArc(start, stop, dir, &matrix, conics);
if (0 == count) {
matrix.mapXY(stop.x(), stop.y(), singlePt);
}
return count;
}
void SkPath::addRoundRect(const SkRect& rect, const SkScalar radii[],
Direction dir) {
SkRRect rrect;
rrect.setRectRadii(rect, (const SkVector*) radii);
this->addRRect(rrect, dir);
}
void SkPath::addRRect(const SkRRect& rrect, Direction dir) {
// legacy start indices: 6 (CW) and 7(CCW)
this->addRRect(rrect, dir, dir == kCW_Direction ? 6 : 7);
}
void SkPath::addRRect(const SkRRect &rrect, Direction dir, unsigned startIndex) {
assert_known_direction(dir);
bool isRRect = hasOnlyMoveTos();
const SkRect& bounds = rrect.getBounds();
if (rrect.isRect() || rrect.isEmpty()) {
// degenerate(rect) => radii points are collapsing
this->addRect(bounds, dir, (startIndex + 1) / 2);
} else if (rrect.isOval()) {
// degenerate(oval) => line points are collapsing
this->addOval(bounds, dir, startIndex / 2);
} else {
fFirstDirection = this->hasOnlyMoveTos() ?
(SkPathPriv::FirstDirection)dir : SkPathPriv::kUnknown_FirstDirection;
SkAutoPathBoundsUpdate apbu(this, bounds);
SkAutoDisableDirectionCheck addc(this);
// we start with a conic on odd indices when moving CW vs. even indices when moving CCW
const bool startsWithConic = ((startIndex & 1) == (dir == kCW_Direction));
const SkScalar weight = SK_ScalarRoot2Over2;
SkDEBUGCODE(int initialVerbCount = this->countVerbs());
const int kVerbs = startsWithConic
? 9 // moveTo + 4x conicTo + 3x lineTo + close
: 10; // moveTo + 4x lineTo + 4x conicTo + close
this->incReserve(kVerbs);
RRectPointIterator rrectIter(rrect, dir, startIndex);
// Corner iterator indices follow the collapsed radii model,
// adjusted such that the start pt is "behind" the radii start pt.
const unsigned rectStartIndex = startIndex / 2 + (dir == kCW_Direction ? 0 : 1);
RectPointIterator rectIter(bounds, dir, rectStartIndex);
this->moveTo(rrectIter.current());
if (startsWithConic) {
for (unsigned i = 0; i < 3; ++i) {
this->conicTo(rectIter.next(), rrectIter.next(), weight);
this->lineTo(rrectIter.next());
}
this->conicTo(rectIter.next(), rrectIter.next(), weight);
// final lineTo handled by close().
} else {
for (unsigned i = 0; i < 4; ++i) {
this->lineTo(rrectIter.next());
this->conicTo(rectIter.next(), rrectIter.next(), weight);
}
}
this->close();
SkPathRef::Editor ed(&fPathRef);
ed.setIsRRect(isRRect, dir, startIndex % 8);
SkASSERT(this->countVerbs() == initialVerbCount + kVerbs);
}
SkDEBUGCODE(fPathRef->validate();)
}
bool SkPath::hasOnlyMoveTos() const {
int count = fPathRef->countVerbs();
const uint8_t* verbs = const_cast<const SkPathRef*>(fPathRef.get())->verbsMemBegin();
for (int i = 0; i < count; ++i) {
if (*verbs == kLine_Verb ||
*verbs == kQuad_Verb ||
*verbs == kConic_Verb ||
*verbs == kCubic_Verb) {
return false;
}
++verbs;
}
return true;
}
bool SkPath::isZeroLengthSincePoint(int startPtIndex) const {
int count = fPathRef->countPoints() - startPtIndex;
if (count < 2) {
return true;
}
const SkPoint* pts = fPathRef.get()->points() + startPtIndex;
const SkPoint& first = *pts;
for (int index = 1; index < count; ++index) {
if (first != pts[index]) {
return false;
}
}
return true;
}
void SkPath::addRoundRect(const SkRect& rect, SkScalar rx, SkScalar ry,
Direction dir) {
assert_known_direction(dir);
if (rx < 0 || ry < 0) {
return;
}
SkRRect rrect;
rrect.setRectXY(rect, rx, ry);
this->addRRect(rrect, dir);
}
void SkPath::addOval(const SkRect& oval, Direction dir) {
// legacy start index: 1
this->addOval(oval, dir, 1);
}
void SkPath::addOval(const SkRect &oval, Direction dir, unsigned startPointIndex) {
assert_known_direction(dir);
/* If addOval() is called after previous moveTo(),
this path is still marked as an oval. This is used to
fit into WebKit's calling sequences.
We can't simply check isEmpty() in this case, as additional
moveTo() would mark the path non empty.
*/
bool isOval = hasOnlyMoveTos();
if (isOval) {
fFirstDirection = (SkPathPriv::FirstDirection)dir;
} else {
fFirstDirection = SkPathPriv::kUnknown_FirstDirection;
}
SkAutoDisableDirectionCheck addc(this);
SkAutoPathBoundsUpdate apbu(this, oval);
SkDEBUGCODE(int initialVerbCount = this->countVerbs());
const int kVerbs = 6; // moveTo + 4x conicTo + close
this->incReserve(kVerbs);
OvalPointIterator ovalIter(oval, dir, startPointIndex);
// The corner iterator pts are tracking "behind" the oval/radii pts.
RectPointIterator rectIter(oval, dir, startPointIndex + (dir == kCW_Direction ? 0 : 1));
const SkScalar weight = SK_ScalarRoot2Over2;
this->moveTo(ovalIter.current());
for (unsigned i = 0; i < 4; ++i) {
this->conicTo(rectIter.next(), ovalIter.next(), weight);
}
this->close();
SkASSERT(this->countVerbs() == initialVerbCount + kVerbs);
SkPathRef::Editor ed(&fPathRef);
ed.setIsOval(isOval, kCCW_Direction == dir, startPointIndex % 4);
}
void SkPath::addCircle(SkScalar x, SkScalar y, SkScalar r, Direction dir) {
if (r > 0) {
this->addOval(SkRect::MakeLTRB(x - r, y - r, x + r, y + r), dir);
}
}
void SkPath::arcTo(const SkRect& oval, SkScalar startAngle, SkScalar sweepAngle,
bool forceMoveTo) {
if (oval.width() < 0 || oval.height() < 0) {
return;
}
if (fPathRef->countVerbs() == 0) {
forceMoveTo = true;
}
SkPoint lonePt;
if (arc_is_lone_point(oval, startAngle, sweepAngle, &lonePt)) {
forceMoveTo ? this->moveTo(lonePt) : this->lineTo(lonePt);
return;
}
SkVector startV, stopV;
SkRotationDirection dir;
angles_to_unit_vectors(startAngle, sweepAngle, &startV, &stopV, &dir);
SkPoint singlePt;
// Adds a move-to to 'pt' if forceMoveTo is true. Otherwise a lineTo unless we're sufficiently
// close to 'pt' currently. This prevents spurious lineTos when adding a series of contiguous
// arcs from the same oval.
auto addPt = [&forceMoveTo, this](const SkPoint& pt) {
SkPoint lastPt;
if (forceMoveTo) {
this->moveTo(pt);
} else if (!this->getLastPt(&lastPt) ||
!SkScalarNearlyEqual(lastPt.fX, pt.fX) ||
!SkScalarNearlyEqual(lastPt.fY, pt.fY)) {
this->lineTo(pt);
}
};
// At this point, we know that the arc is not a lone point, but startV == stopV
// indicates that the sweepAngle is too small such that angles_to_unit_vectors
// cannot handle it.
if (startV == stopV) {
SkScalar endAngle = SkDegreesToRadians(startAngle + sweepAngle);
SkScalar radiusX = oval.width() / 2;
SkScalar radiusY = oval.height() / 2;
// We cannot use SkScalarSinCos function in the next line because
// SkScalarSinCos has a threshold *SkScalarNearlyZero*. When sin(startAngle)
// is 0 and sweepAngle is very small and radius is huge, the expected
// behavior here is to draw a line. But calling SkScalarSinCos will
// make sin(endAngle) to be 0 which will then draw a dot.
singlePt.set(oval.centerX() + radiusX * sk_float_cos(endAngle),
oval.centerY() + radiusY * sk_float_sin(endAngle));
addPt(singlePt);
return;
}
SkConic conics[SkConic::kMaxConicsForArc];
int count = build_arc_conics(oval, startV, stopV, dir, conics, &singlePt);
if (count) {
this->incReserve(count * 2 + 1);
const SkPoint& pt = conics[0].fPts[0];
addPt(pt);
for (int i = 0; i < count; ++i) {
this->conicTo(conics[i].fPts[1], conics[i].fPts[2], conics[i].fW);
}
} else {
addPt(singlePt);
}
}
// This converts the SVG arc to conics.
// Partly adapted from Niko's code in kdelibs/kdecore/svgicons.
// Then transcribed from webkit/chrome's SVGPathNormalizer::decomposeArcToCubic()
// See also SVG implementation notes:
// http://www.w3.org/TR/SVG/implnote.html#ArcConversionEndpointToCenter
// Note that arcSweep bool value is flipped from the original implementation.
void SkPath::arcTo(SkScalar rx, SkScalar ry, SkScalar angle, SkPath::ArcSize arcLarge,
SkPath::Direction arcSweep, SkScalar x, SkScalar y) {
this->injectMoveToIfNeeded();
SkPoint srcPts[2];
this->getLastPt(&srcPts[0]);
// If rx = 0 or ry = 0 then this arc is treated as a straight line segment (a "lineto")
// joining the endpoints.
// http://www.w3.org/TR/SVG/implnote.html#ArcOutOfRangeParameters
if (!rx || !ry) {
this->lineTo(x, y);
return;
}
// If the current point and target point for the arc are identical, it should be treated as a
// zero length path. This ensures continuity in animations.
srcPts[1].set(x, y);
if (srcPts[0] == srcPts[1]) {
this->lineTo(x, y);
return;
}
rx = SkScalarAbs(rx);
ry = SkScalarAbs(ry);
SkVector midPointDistance = srcPts[0] - srcPts[1];
midPointDistance *= 0.5f;
SkMatrix pointTransform;
pointTransform.setRotate(-angle);
SkPoint transformedMidPoint;
pointTransform.mapPoints(&transformedMidPoint, &midPointDistance, 1);
SkScalar squareRx = rx * rx;
SkScalar squareRy = ry * ry;
SkScalar squareX = transformedMidPoint.fX * transformedMidPoint.fX;
SkScalar squareY = transformedMidPoint.fY * transformedMidPoint.fY;
// Check if the radii are big enough to draw the arc, scale radii if not.
// http://www.w3.org/TR/SVG/implnote.html#ArcCorrectionOutOfRangeRadii
SkScalar radiiScale = squareX / squareRx + squareY / squareRy;
if (radiiScale > 1) {
radiiScale = SkScalarSqrt(radiiScale);
rx *= radiiScale;
ry *= radiiScale;
}
pointTransform.setScale(1 / rx, 1 / ry);
pointTransform.preRotate(-angle);
SkPoint unitPts[2];
pointTransform.mapPoints(unitPts, srcPts, (int) SK_ARRAY_COUNT(unitPts));
SkVector delta = unitPts[1] - unitPts[0];
SkScalar d = delta.fX * delta.fX + delta.fY * delta.fY;
SkScalar scaleFactorSquared = SkTMax(1 / d - 0.25f, 0.f);
SkScalar scaleFactor = SkScalarSqrt(scaleFactorSquared);
if (SkToBool(arcSweep) != SkToBool(arcLarge)) { // flipped from the original implementation
scaleFactor = -scaleFactor;
}
delta.scale(scaleFactor);
SkPoint centerPoint = unitPts[0] + unitPts[1];
centerPoint *= 0.5f;
centerPoint.offset(-delta.fY, delta.fX);
unitPts[0] -= centerPoint;
unitPts[1] -= centerPoint;
SkScalar theta1 = SkScalarATan2(unitPts[0].fY, unitPts[0].fX);
SkScalar theta2 = SkScalarATan2(unitPts[1].fY, unitPts[1].fX);
SkScalar thetaArc = theta2 - theta1;
if (thetaArc < 0 && !arcSweep) { // arcSweep flipped from the original implementation
thetaArc += SK_ScalarPI * 2;
} else if (thetaArc > 0 && arcSweep) { // arcSweep flipped from the original implementation
thetaArc -= SK_ScalarPI * 2;
}
pointTransform.setRotate(angle);
pointTransform.preScale(rx, ry);
#ifdef SK_SUPPORT_LEGACY_SVG_ARC_TO
int segments = SkScalarCeilToInt(SkScalarAbs(thetaArc / (SK_ScalarPI / 2)));
#else
// the arc may be slightly bigger than 1/4 circle, so allow up to 1/3rd
int segments = SkScalarCeilToInt(SkScalarAbs(thetaArc / (2 * SK_ScalarPI / 3)));
#endif
SkScalar thetaWidth = thetaArc / segments;
SkScalar t = SkScalarTan(0.5f * thetaWidth);
if (!SkScalarIsFinite(t)) {
return;
}
SkScalar startTheta = theta1;
SkScalar w = SkScalarSqrt(SK_ScalarHalf + SkScalarCos(thetaWidth) * SK_ScalarHalf);
#ifndef SK_SUPPORT_LEGACY_SVG_ARC_TO
auto scalar_is_integer = [](SkScalar scalar) -> bool {
return scalar == SkScalarFloorToScalar(scalar);
};
bool expectIntegers = SkScalarNearlyZero(SK_ScalarPI/2 - SkScalarAbs(thetaWidth)) &&
scalar_is_integer(rx) && scalar_is_integer(ry) &&
scalar_is_integer(x) && scalar_is_integer(y);
#endif
for (int i = 0; i < segments; ++i) {
SkScalar endTheta = startTheta + thetaWidth;
SkScalar cosEndTheta, sinEndTheta = SkScalarSinCos(endTheta, &cosEndTheta);
unitPts[1].set(cosEndTheta, sinEndTheta);
unitPts[1] += centerPoint;
unitPts[0] = unitPts[1];
unitPts[0].offset(t * sinEndTheta, -t * cosEndTheta);
SkPoint mapped[2];
pointTransform.mapPoints(mapped, unitPts, (int) SK_ARRAY_COUNT(unitPts));
/*
Computing the arc width introduces rounding errors that cause arcs to start
outside their marks. A round rect may lose convexity as a result. If the input
values are on integers, place the conic on integers as well.
*/
#ifndef SK_SUPPORT_LEGACY_SVG_ARC_TO
if (expectIntegers) {
SkScalar* mappedScalars = &mapped[0].fX;
for (unsigned index = 0; index < sizeof(mapped) / sizeof(SkScalar); ++index) {
mappedScalars[index] = SkScalarRoundToScalar(mappedScalars[index]);
}
}
#endif
this->conicTo(mapped[0], mapped[1], w);
startTheta = endTheta;
}
}
void SkPath::rArcTo(SkScalar rx, SkScalar ry, SkScalar xAxisRotate, SkPath::ArcSize largeArc,
SkPath::Direction sweep, SkScalar dx, SkScalar dy) {
SkPoint currentPoint;
this->getLastPt(&currentPoint);
this->arcTo(rx, ry, xAxisRotate, largeArc, sweep, currentPoint.fX + dx, currentPoint.fY + dy);
}
void SkPath::addArc(const SkRect& oval, SkScalar startAngle, SkScalar sweepAngle) {
if (oval.isEmpty() || 0 == sweepAngle) {
return;
}
const SkScalar kFullCircleAngle = SkIntToScalar(360);
if (sweepAngle >= kFullCircleAngle || sweepAngle <= -kFullCircleAngle) {
// We can treat the arc as an oval if it begins at one of our legal starting positions.
// See SkPath::addOval() docs.
SkScalar startOver90 = startAngle / 90.f;
SkScalar startOver90I = SkScalarRoundToScalar(startOver90);
SkScalar error = startOver90 - startOver90I;
if (SkScalarNearlyEqual(error, 0)) {
// Index 1 is at startAngle == 0.
SkScalar startIndex = std::fmod(startOver90I + 1.f, 4.f);
startIndex = startIndex < 0 ? startIndex + 4.f : startIndex;
this->addOval(oval, sweepAngle > 0 ? kCW_Direction : kCCW_Direction,
(unsigned) startIndex);
return;
}
}
this->arcTo(oval, startAngle, sweepAngle, true);
}
/*
Need to handle the case when the angle is sharp, and our computed end-points
for the arc go behind pt1 and/or p2...
*/
void SkPath::arcTo(SkScalar x1, SkScalar y1, SkScalar x2, SkScalar y2, SkScalar radius) {
if (radius == 0) {
this->lineTo(x1, y1);
return;
}
SkVector before, after;
// need to know our prev pt so we can construct tangent vectors
{
SkPoint start;
this->getLastPt(&start);
// Handle degenerate cases by adding a line to the first point and
// bailing out.
before.setNormalize(x1 - start.fX, y1 - start.fY);
after.setNormalize(x2 - x1, y2 - y1);
}
SkScalar cosh = SkPoint::DotProduct(before, after);
SkScalar sinh = SkPoint::CrossProduct(before, after);
if (SkScalarNearlyZero(sinh)) { // angle is too tight
this->lineTo(x1, y1);
return;
}
SkScalar dist = SkScalarAbs(radius * (1 - cosh) / sinh);
SkScalar xx = x1 - dist * before.fX;
SkScalar yy = y1 - dist * before.fY;
after.setLength(dist);
this->lineTo(xx, yy);
SkScalar weight = SkScalarSqrt(SK_ScalarHalf + cosh * SK_ScalarHalf);
this->conicTo(x1, y1, x1 + after.fX, y1 + after.fY, weight);
}
///////////////////////////////////////////////////////////////////////////////
void SkPath::addPath(const SkPath& path, SkScalar dx, SkScalar dy, AddPathMode mode) {
SkMatrix matrix;
matrix.setTranslate(dx, dy);
this->addPath(path, matrix, mode);
}
void SkPath::addPath(const SkPath& path, const SkMatrix& matrix, AddPathMode mode) {
SkPathRef::Editor(&fPathRef, path.countVerbs(), path.countPoints());
RawIter iter(path);
SkPoint pts[4];
Verb verb;
SkMatrixPriv::MapPtsProc proc = SkMatrixPriv::GetMapPtsProc(matrix);
bool firstVerb = true;
while ((verb = iter.next(pts)) != kDone_Verb) {
switch (verb) {
case kMove_Verb:
proc(matrix, &pts[0], &pts[0], 1);
if (firstVerb && mode == kExtend_AddPathMode && !isEmpty()) {
injectMoveToIfNeeded(); // In case last contour is closed
this->lineTo(pts[0]);
} else {
this->moveTo(pts[0]);
}
break;
case kLine_Verb:
proc(matrix, &pts[1], &pts[1], 1);
this->lineTo(pts[1]);
break;
case kQuad_Verb:
proc(matrix, &pts[1], &pts[1], 2);
this->quadTo(pts[1], pts[2]);
break;
case kConic_Verb:
proc(matrix, &pts[1], &pts[1], 2);
this->conicTo(pts[1], pts[2], iter.conicWeight());
break;
case kCubic_Verb:
proc(matrix, &pts[1], &pts[1], 3);
this->cubicTo(pts[1], pts[2], pts[3]);
break;
case kClose_Verb:
this->close();
break;
default:
SkDEBUGFAIL("unknown verb");
}
firstVerb = false;
}
}
///////////////////////////////////////////////////////////////////////////////
static int pts_in_verb(unsigned verb) {
static const uint8_t gPtsInVerb[] = {
1, // kMove
1, // kLine
2, // kQuad
2, // kConic
3, // kCubic
0, // kClose
0 // kDone
};
SkASSERT(verb < SK_ARRAY_COUNT(gPtsInVerb));
return gPtsInVerb[verb];
}
// ignore the last point of the 1st contour
void SkPath::reversePathTo(const SkPath& path) {
const uint8_t* verbs = path.fPathRef->verbsMemBegin(); // points at the last verb
if (!verbs) { // empty path returns nullptr
return;
}
const uint8_t* verbsEnd = path.fPathRef->verbs() - 1; // points just past the first verb
SkASSERT(verbsEnd[0] == kMove_Verb);
const SkPoint* pts = path.fPathRef->pointsEnd() - 1;
const SkScalar* conicWeights = path.fPathRef->conicWeightsEnd();
while (verbs < verbsEnd) {
uint8_t v = *verbs++;
pts -= pts_in_verb(v);
switch (v) {
case kMove_Verb:
// if the path has multiple contours, stop after reversing the last
return;
case kLine_Verb:
this->lineTo(pts[0]);
break;
case kQuad_Verb:
this->quadTo(pts[1], pts[0]);
break;
case kConic_Verb:
this->conicTo(pts[1], pts[0], *--conicWeights);
break;
case kCubic_Verb:
this->cubicTo(pts[2], pts[1], pts[0]);
break;
case kClose_Verb:
SkASSERT(verbs - path.fPathRef->verbsMemBegin() == 1);
break;
default:
SkDEBUGFAIL("bad verb");
break;
}
}
}
void SkPath::reverseAddPath(const SkPath& src) {
SkPathRef::Editor ed(&fPathRef, src.fPathRef->countPoints(), src.fPathRef->countVerbs());
const SkPoint* pts = src.fPathRef->pointsEnd();
// we will iterator through src's verbs backwards
const uint8_t* verbs = src.fPathRef->verbsMemBegin(); // points at the last verb
const uint8_t* verbsEnd = src.fPathRef->verbs(); // points just past the first verb
const SkScalar* conicWeights = src.fPathRef->conicWeightsEnd();
bool needMove = true;
bool needClose = false;
while (verbs < verbsEnd) {
uint8_t v = *(verbs++);
int n = pts_in_verb(v);
if (needMove) {
--pts;
this->moveTo(pts->fX, pts->fY);
needMove = false;
}
pts -= n;
switch (v) {
case kMove_Verb:
if (needClose) {
this->close();
needClose = false;
}
needMove = true;
pts += 1; // so we see the point in "if (needMove)" above
break;
case kLine_Verb:
this->lineTo(pts[0]);
break;
case kQuad_Verb:
this->quadTo(pts[1], pts[0]);
break;
case kConic_Verb:
this->conicTo(pts[1], pts[0], *--conicWeights);
break;
case kCubic_Verb:
this->cubicTo(pts[2], pts[1], pts[0]);
break;
case kClose_Verb:
needClose = true;
break;
default:
SkDEBUGFAIL("unexpected verb");
}
}
}
///////////////////////////////////////////////////////////////////////////////
void SkPath::offset(SkScalar dx, SkScalar dy, SkPath* dst) const {
SkMatrix matrix;
matrix.setTranslate(dx, dy);
this->transform(matrix, dst);
}
static void subdivide_cubic_to(SkPath* path, const SkPoint pts[4],
int level = 2) {
if (--level >= 0) {
SkPoint tmp[7];
SkChopCubicAtHalf(pts, tmp);
subdivide_cubic_to(path, &tmp[0], level);
subdivide_cubic_to(path, &tmp[3], level);
} else {
path->cubicTo(pts[1], pts[2], pts[3]);
}
}
void SkPath::transform(const SkMatrix& matrix, SkPath* dst) const {
SkDEBUGCODE(this->validate();)
if (dst == nullptr) {
dst = (SkPath*)this;
}
if (matrix.hasPerspective()) {
SkPath tmp;
tmp.fFillType = fFillType;
SkPath::Iter iter(*this, false);
SkPoint pts[4];
SkPath::Verb verb;
while ((verb = iter.next(pts, false)) != kDone_Verb) {
switch (verb) {
case kMove_Verb:
tmp.moveTo(pts[0]);
break;
case kLine_Verb:
tmp.lineTo(pts[1]);
break;
case kQuad_Verb:
// promote the quad to a conic
tmp.conicTo(pts[1], pts[2],
SkConic::TransformW(pts, SK_Scalar1, matrix));
break;
case kConic_Verb:
tmp.conicTo(pts[1], pts[2],
SkConic::TransformW(pts, iter.conicWeight(), matrix));
break;
case kCubic_Verb:
subdivide_cubic_to(&tmp, pts);
break;
case kClose_Verb:
tmp.close();
break;
default:
SkDEBUGFAIL("unknown verb");
break;
}
}
dst->swap(tmp);
SkPathRef::Editor ed(&dst->fPathRef);
matrix.mapPoints(ed.points(), ed.pathRef()->countPoints());
dst->fFirstDirection = SkPathPriv::kUnknown_FirstDirection;
} else {
SkPathRef::CreateTransformedCopy(&dst->fPathRef, *fPathRef.get(), matrix);
if (this != dst) {
dst->fFillType = fFillType;
dst->fConvexity.store(fConvexity);
dst->fIsVolatile = fIsVolatile;
}
if (SkPathPriv::kUnknown_FirstDirection == fFirstDirection) {
dst->fFirstDirection = SkPathPriv::kUnknown_FirstDirection;
} else {
SkScalar det2x2 =
matrix.get(SkMatrix::kMScaleX) * matrix.get(SkMatrix::kMScaleY) -
matrix.get(SkMatrix::kMSkewX) * matrix.get(SkMatrix::kMSkewY);
if (det2x2 < 0) {
dst->fFirstDirection = SkPathPriv::OppositeFirstDirection(
(SkPathPriv::FirstDirection)fFirstDirection.load());
} else if (det2x2 > 0) {
dst->fFirstDirection = fFirstDirection.load();
} else {
dst->fConvexity = kUnknown_Convexity;
dst->fFirstDirection = SkPathPriv::kUnknown_FirstDirection;
}
}
SkDEBUGCODE(dst->validate();)
}
}
///////////////////////////////////////////////////////////////////////////////
///////////////////////////////////////////////////////////////////////////////
SkPath::Iter::Iter() {
#ifdef SK_DEBUG
fPts = nullptr;
fConicWeights = nullptr;
fMoveTo.fX = fMoveTo.fY = fLastPt.fX = fLastPt.fY = 0;
fForceClose = fCloseLine = false;
fSegmentState = kEmptyContour_SegmentState;
#endif
// need to init enough to make next() harmlessly return kDone_Verb
fVerbs = nullptr;
fVerbStop = nullptr;
fNeedClose = false;
}
SkPath::Iter::Iter(const SkPath& path, bool forceClose) {
this->setPath(path, forceClose);
}
void SkPath::Iter::setPath(const SkPath& path, bool forceClose) {
fPts = path.fPathRef->points();
fVerbs = path.fPathRef->verbs();
fVerbStop = path.fPathRef->verbsMemBegin();
fConicWeights = path.fPathRef->conicWeights();
if (fConicWeights) {
fConicWeights -= 1; // begin one behind
}
fLastPt.fX = fLastPt.fY = 0;
fMoveTo.fX = fMoveTo.fY = 0;
fForceClose = SkToU8(forceClose);
fNeedClose = false;
fSegmentState = kEmptyContour_SegmentState;
}
bool SkPath::Iter::isClosedContour() const {
if (fVerbs == nullptr || fVerbs == fVerbStop) {
return false;
}
if (fForceClose) {
return true;
}
const uint8_t* verbs = fVerbs;
const uint8_t* stop = fVerbStop;
if (kMove_Verb == *(verbs - 1)) {
verbs -= 1; // skip the initial moveto
}
while (verbs > stop) {
// verbs points one beyond the current verb, decrement first.
unsigned v = *(--verbs);
if (kMove_Verb == v) {
break;
}
if (kClose_Verb == v) {
return true;
}
}
return false;
}
SkPath::Verb SkPath::Iter::autoClose(SkPoint pts[2]) {
SkASSERT(pts);
if (fLastPt != fMoveTo) {
// A special case: if both points are NaN, SkPoint::operation== returns
// false, but the iterator expects that they are treated as the same.
// (consider SkPoint is a 2-dimension float point).
if (SkScalarIsNaN(fLastPt.fX) || SkScalarIsNaN(fLastPt.fY) ||
SkScalarIsNaN(fMoveTo.fX) || SkScalarIsNaN(fMoveTo.fY)) {
return kClose_Verb;
}
pts[0] = fLastPt;
pts[1] = fMoveTo;
fLastPt = fMoveTo;
fCloseLine = true;
return kLine_Verb;
} else {
pts[0] = fMoveTo;
return kClose_Verb;
}
}
const SkPoint& SkPath::Iter::cons_moveTo() {
if (fSegmentState == kAfterMove_SegmentState) {
// Set the first return pt to the move pt
fSegmentState = kAfterPrimitive_SegmentState;
return fMoveTo;
}
SkASSERT(fSegmentState == kAfterPrimitive_SegmentState);
// Set the first return pt to the last pt of the previous primitive.
return fPts[-1];
}
void SkPath::Iter::consumeDegenerateSegments(bool exact) {
// We need to step over anything that will not move the current draw point
// forward before the next move is seen
const uint8_t* lastMoveVerb = nullptr;
const SkPoint* lastMovePt = nullptr;
const SkScalar* lastMoveWeight = nullptr;
SkPoint lastPt = fLastPt;
while (fVerbs != fVerbStop) {
unsigned verb = *(fVerbs - 1); // fVerbs is one beyond the current verb
switch (verb) {
case kMove_Verb:
// Keep a record of this most recent move
lastMoveVerb = fVerbs;
lastMovePt = fPts;
lastMoveWeight = fConicWeights;
lastPt = fPts[0];
fVerbs--;
fPts++;
break;
case kClose_Verb:
// A close when we are in a segment is always valid except when it
// follows a move which follows a segment.
if (fSegmentState == kAfterPrimitive_SegmentState && !lastMoveVerb) {
return;
}
// A close at any other time must be ignored
fVerbs--;
break;
case kLine_Verb:
if (!IsLineDegenerate(lastPt, fPts[0], exact)) {
if (lastMoveVerb) {
fVerbs = lastMoveVerb;
fPts = lastMovePt;
fConicWeights = lastMoveWeight;
return;
}
return;
}
// Ignore this line and continue
fVerbs--;
fPts++;
break;
case kConic_Verb:
case kQuad_Verb:
if (!IsQuadDegenerate(lastPt, fPts[0], fPts[1], exact)) {
if (lastMoveVerb) {
fVerbs = lastMoveVerb;
fPts = lastMovePt;
fConicWeights = lastMoveWeight;
return;
}
return;
}
// Ignore this line and continue
fVerbs--;
fPts += 2;
fConicWeights += (kConic_Verb == verb);
break;
case kCubic_Verb:
if (!IsCubicDegenerate(lastPt, fPts[0], fPts[1], fPts[2], exact)) {
if (lastMoveVerb) {
fVerbs = lastMoveVerb;
fPts = lastMovePt;
fConicWeights = lastMoveWeight;
return;
}
return;
}
// Ignore this line and continue
fVerbs--;
fPts += 3;
break;
default:
SkDEBUGFAIL("Should never see kDone_Verb");
}
}
}
SkPath::Verb SkPath::Iter::doNext(SkPoint ptsParam[4]) {
SkASSERT(ptsParam);
if (fVerbs == fVerbStop) {
// Close the curve if requested and if there is some curve to close
if (fNeedClose && fSegmentState == kAfterPrimitive_SegmentState) {
if (kLine_Verb == this->autoClose(ptsParam)) {
return kLine_Verb;
}
fNeedClose = false;
return kClose_Verb;
}
return kDone_Verb;
}
// fVerbs is one beyond the current verb, decrement first
unsigned verb = *(--fVerbs);
const SkPoint* SK_RESTRICT srcPts = fPts;
SkPoint* SK_RESTRICT pts = ptsParam;
switch (verb) {
case kMove_Verb:
if (fNeedClose) {
fVerbs++; // move back one verb
verb = this->autoClose(pts);
if (verb == kClose_Verb) {
fNeedClose = false;
}
return (Verb)verb;
}
if (fVerbs == fVerbStop) { // might be a trailing moveto
return kDone_Verb;
}
fMoveTo = *srcPts;
pts[0] = *srcPts;
srcPts += 1;
fSegmentState = kAfterMove_SegmentState;
fLastPt = fMoveTo;
fNeedClose = fForceClose;
break;
case kLine_Verb:
pts[0] = this->cons_moveTo();
pts[1] = srcPts[0];
fLastPt = srcPts[0];
fCloseLine = false;
srcPts += 1;
break;
case kConic_Verb:
fConicWeights += 1;
// fall-through
case kQuad_Verb:
pts[0] = this->cons_moveTo();
memcpy(&pts[1], srcPts, 2 * sizeof(SkPoint));
fLastPt = srcPts[1];
srcPts += 2;
break;
case kCubic_Verb:
pts[0] = this->cons_moveTo();
memcpy(&pts[1], srcPts, 3 * sizeof(SkPoint));
fLastPt = srcPts[2];
srcPts += 3;
break;
case kClose_Verb:
verb = this->autoClose(pts);
if (verb == kLine_Verb) {
fVerbs++; // move back one verb
} else {
fNeedClose = false;
fSegmentState = kEmptyContour_SegmentState;
}
fLastPt = fMoveTo;
break;
}
fPts = srcPts;
return (Verb)verb;
}
///////////////////////////////////////////////////////////////////////////////
#include "SkString.h"
#include "SkStringUtils.h"
#include "SkStream.h"
static void append_params(SkString* str, const char label[], const SkPoint pts[],
int count, SkScalarAsStringType strType, SkScalar conicWeight = -12345) {
str->append(label);
str->append("(");
const SkScalar* values = &pts[0].fX;
count *= 2;
for (int i = 0; i < count; ++i) {
SkAppendScalar(str, values[i], strType);
if (i < count - 1) {
str->append(", ");
}
}
if (conicWeight != -12345) {
str->append(", ");
SkAppendScalar(str, conicWeight, strType);
}
str->append(");");
if (kHex_SkScalarAsStringType == strType) {
str->append(" // ");
for (int i = 0; i < count; ++i) {
SkAppendScalarDec(str, values[i]);
if (i < count - 1) {
str->append(", ");
}
}
if (conicWeight >= 0) {
str->append(", ");
SkAppendScalarDec(str, conicWeight);
}
}
str->append("\n");
}
void SkPath::dump(SkWStream* wStream, bool forceClose, bool dumpAsHex) const {
SkScalarAsStringType asType = dumpAsHex ? kHex_SkScalarAsStringType : kDec_SkScalarAsStringType;
Iter iter(*this, forceClose);
SkPoint pts[4];
Verb verb;
SkString builder;
char const * const gFillTypeStrs[] = {
"Winding",
"EvenOdd",
"InverseWinding",
"InverseEvenOdd",
};
builder.printf("path.setFillType(SkPath::k%s_FillType);\n",
gFillTypeStrs[(int) this->getFillType()]);
while ((verb = iter.next(pts, false)) != kDone_Verb) {
switch (verb) {
case kMove_Verb:
append_params(&builder, "path.moveTo", &pts[0], 1, asType);
break;
case kLine_Verb:
append_params(&builder, "path.lineTo", &pts[1], 1, asType);
break;
case kQuad_Verb:
append_params(&builder, "path.quadTo", &pts[1], 2, asType);
break;
case kConic_Verb:
append_params(&builder, "path.conicTo", &pts[1], 2, asType, iter.conicWeight());
break;
case kCubic_Verb:
append_params(&builder, "path.cubicTo", &pts[1], 3, asType);
break;
case kClose_Verb:
builder.append("path.close();\n");
break;
default:
SkDebugf(" path: UNKNOWN VERB %d, aborting dump...\n", verb);
verb = kDone_Verb; // stop the loop
break;
}
if (!wStream && builder.size()) {
SkDebugf("%s", builder.c_str());
builder.reset();
}
}
if (wStream) {
wStream->writeText(builder.c_str());
}
}
void SkPath::dump() const {
this->dump(nullptr, false, false);
}
void SkPath::dumpHex() const {
this->dump(nullptr, false, true);
}
bool SkPath::isValidImpl() const {
if ((fFillType & ~3) != 0) {
return false;
}
#ifdef SK_DEBUG_PATH
if (!fBoundsIsDirty) {
SkRect bounds;
bool isFinite = compute_pt_bounds(&bounds, *fPathRef.get());
if (SkToBool(fIsFinite) != isFinite) {
return false;
}
if (fPathRef->countPoints() <= 1) {
// if we're empty, fBounds may be empty but translated, so we can't
// necessarily compare to bounds directly
// try path.addOval(2, 2, 2, 2) which is empty, but the bounds will
// be [2, 2, 2, 2]
if (!bounds.isEmpty() || !fBounds.isEmpty()) {
return false;
}
} else {
if (bounds.isEmpty()) {
if (!fBounds.isEmpty()) {
return false;
}
} else {
if (!fBounds.isEmpty()) {
if (!fBounds.contains(bounds)) {
return false;
}
}
}
}
}
#endif // SK_DEBUG_PATH
return true;
}
///////////////////////////////////////////////////////////////////////////////
static int sign(SkScalar x) { return x < 0; }
#define kValueNeverReturnedBySign 2
enum DirChange {
kLeft_DirChange,
kRight_DirChange,
kStraight_DirChange,
kBackwards_DirChange,
kInvalid_DirChange
};
static bool almost_equal(SkScalar compA, SkScalar compB) {
// The error epsilon was empirically derived; worse case round rects
// with a mid point outset by 2x float epsilon in tests had an error
// of 12.
const int epsilon = 16;
if (!SkScalarIsFinite(compA) || !SkScalarIsFinite(compB)) {
return false;
}
// no need to check for small numbers because SkPath::Iter has removed degenerate values
int aBits = SkFloatAs2sCompliment(compA);
int bBits = SkFloatAs2sCompliment(compB);
return aBits < bBits + epsilon && bBits < aBits + epsilon;
}
static bool approximately_zero_when_compared_to(double x, double y) {
return x == 0 || fabs(x) < fabs(y * FLT_EPSILON);
}
// only valid for a single contour
struct Convexicator {
Convexicator()
: fPtCount(0)
, fConvexity(SkPath::kConvex_Convexity)
, fFirstDirection(SkPathPriv::kUnknown_FirstDirection)
, fIsFinite(true)
, fIsCurve(false)
, fBackwards(false) {
fExpectedDir = kInvalid_DirChange;
// warnings
fPriorPt.set(0,0);
fLastPt.set(0, 0);
fCurrPt.set(0, 0);
fLastVec.set(0, 0);
fFirstVec.set(0, 0);
fDx = fDy = 0;
fSx = fSy = kValueNeverReturnedBySign;
}
SkPath::Convexity getConvexity() const { return fConvexity; }
/** The direction returned is only valid if the path is determined convex */
SkPathPriv::FirstDirection getFirstDirection() const { return fFirstDirection; }
void addPt(const SkPoint& pt) {
if (SkPath::kConcave_Convexity == fConvexity || !fIsFinite) {
return;
}
if (0 == fPtCount) {
fCurrPt = pt;
++fPtCount;
} else {
SkVector vec = pt - fCurrPt;
SkScalar lengthSqd = SkPointPriv::LengthSqd(vec);
if (!SkScalarIsFinite(lengthSqd)) {
fIsFinite = false;
} else if (lengthSqd) {
fPriorPt = fLastPt;
fLastPt = fCurrPt;
fCurrPt = pt;
if (++fPtCount == 2) {
fFirstVec = fLastVec = vec;
} else {
SkASSERT(fPtCount > 2);
this->addVec(vec);
}
int sx = sign(vec.fX);
int sy = sign(vec.fY);
fDx += (sx != fSx);
fDy += (sy != fSy);
fSx = sx;
fSy = sy;
if (fDx > 3 || fDy > 3) {
fConvexity = SkPath::kConcave_Convexity;
}
}
}
}
void close() {
if (fPtCount > 2) {
this->addVec(fFirstVec);
}
}
DirChange directionChange(const SkVector& curVec) {
SkScalar cross = SkPoint::CrossProduct(fLastVec, curVec);
SkScalar smallest = SkTMin(fCurrPt.fX, SkTMin(fCurrPt.fY, SkTMin(fLastPt.fX, fLastPt.fY)));
SkScalar largest = SkTMax(fCurrPt.fX, SkTMax(fCurrPt.fY, SkTMax(fLastPt.fX, fLastPt.fY)));
largest = SkTMax(largest, -smallest);
if (!almost_equal(largest, largest + cross)) {
int sign = SkScalarSignAsInt(cross);
if (sign) {
return (1 == sign) ? kRight_DirChange : kLeft_DirChange;
}
}
if (cross) {
double dLastVecX = SkScalarToDouble(fLastPt.fX) - SkScalarToDouble(fPriorPt.fX);
double dLastVecY = SkScalarToDouble(fLastPt.fY) - SkScalarToDouble(fPriorPt.fY);
double dCurrVecX = SkScalarToDouble(fCurrPt.fX) - SkScalarToDouble(fLastPt.fX);
double dCurrVecY = SkScalarToDouble(fCurrPt.fY) - SkScalarToDouble(fLastPt.fY);
double dCross = dLastVecX * dCurrVecY - dLastVecY * dCurrVecX;
if (!approximately_zero_when_compared_to(dCross, SkScalarToDouble(largest))) {
int sign = SkScalarSignAsInt(SkDoubleToScalar(dCross));
if (sign) {
return (1 == sign) ? kRight_DirChange : kLeft_DirChange;
}
}
}
if (!SkScalarNearlyZero(SkPointPriv::LengthSqd(fLastVec),
SK_ScalarNearlyZero*SK_ScalarNearlyZero) &&
!SkScalarNearlyZero(SkPointPriv::LengthSqd(curVec),
SK_ScalarNearlyZero*SK_ScalarNearlyZero) &&
fLastVec.dot(curVec) < 0.0f) {
return kBackwards_DirChange;
}
return kStraight_DirChange;
}
bool hasBackwards() const {
return fBackwards;
}
bool isFinite() const {
return fIsFinite;
}
void setCurve(bool isCurve) {
fIsCurve = isCurve;
}
private:
void addVec(const SkVector& vec) {
SkASSERT(vec.fX || vec.fY);
DirChange dir = this->directionChange(vec);
switch (dir) {
case kLeft_DirChange: // fall through
case kRight_DirChange:
if (kInvalid_DirChange == fExpectedDir) {
fExpectedDir = dir;
fFirstDirection = (kRight_DirChange == dir) ? SkPathPriv::kCW_FirstDirection
: SkPathPriv::kCCW_FirstDirection;
} else if (dir != fExpectedDir) {
fConvexity = SkPath::kConcave_Convexity;
fFirstDirection = SkPathPriv::kUnknown_FirstDirection;
}
fLastVec = vec;
break;
case kStraight_DirChange:
break;
case kBackwards_DirChange:
if (fIsCurve) {
// If any of the subsequent dir is non-backward, it'll be concave.
// Otherwise, it's still convex.
fExpectedDir = dir;
}
fLastVec = vec;
fBackwards = true;
break;
case kInvalid_DirChange:
SK_ABORT("Use of invalid direction change flag");
break;
}
}
SkPoint fPriorPt;
SkPoint fLastPt;
SkPoint fCurrPt;
// fLastVec does not necessarily start at fLastPt. We only advance it when the cross product
// value with the current vec is deemed to be of a significant value.
SkVector fLastVec, fFirstVec;
int fPtCount; // non-degenerate points
DirChange fExpectedDir;
SkPath::Convexity fConvexity;
SkPathPriv::FirstDirection fFirstDirection;
int fDx, fDy, fSx, fSy;
bool fIsFinite;
bool fIsCurve;
bool fBackwards;
};
SkPath::Convexity SkPath::internalGetConvexity() const {
// Sometimes we think we need to calculate convexity but another thread already did.
for (auto c = (Convexity)fConvexity; c != kUnknown_Convexity; ) {
return c;
}
SkPoint pts[4];
SkPath::Verb verb;
SkPath::Iter iter(*this, true);
int contourCount = 0;
int count;
Convexicator state;
if (!isFinite()) {
return kUnknown_Convexity;
}
while ((verb = iter.next(pts, false, false)) != SkPath::kDone_Verb) {
switch (verb) {
case kMove_Verb:
if (++contourCount > 1) {
fConvexity = kConcave_Convexity;
return kConcave_Convexity;
}
pts[1] = pts[0];
// fall through
case kLine_Verb:
count = 1;
state.setCurve(false);
break;
case kQuad_Verb:
// fall through
case kConic_Verb:
// fall through
case kCubic_Verb:
count = 2 + (kCubic_Verb == verb);
// As an additional enhancement, this could set curve true only
// if the curve is nonlinear
state.setCurve(true);
break;
case kClose_Verb:
state.setCurve(false);
state.close();
count = 0;
break;
default:
SkDEBUGFAIL("bad verb");
fConvexity = kConcave_Convexity;
return kConcave_Convexity;
}
for (int i = 1; i <= count; i++) {
state.addPt(pts[i]);
}
// early exit
if (!state.isFinite()) {
return kUnknown_Convexity;
}
if (kConcave_Convexity == state.getConvexity()) {
fConvexity = kConcave_Convexity;
return kConcave_Convexity;
}
}
fConvexity = state.getConvexity();
if (kConvex_Convexity == fConvexity && SkPathPriv::kUnknown_FirstDirection == fFirstDirection) {
if (SkPathPriv::kUnknown_FirstDirection == state.getFirstDirection() &&
!this->getBounds().isEmpty() && !state.hasBackwards()) {
fConvexity = Convexity::kConcave_Convexity;
} else {
fFirstDirection = state.getFirstDirection();
}
}
return static_cast<Convexity>(fConvexity);
}
///////////////////////////////////////////////////////////////////////////////
class ContourIter {