blob: 9dd89766f05e9eaa779f1ea3e11296f826e17be2 [file] [log] [blame]
* Copyright 2020 Google LLC
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
#ifndef GrShape_DEFINED
#define GrShape_DEFINED
#include "include/core/SkPath.h"
#include "include/core/SkPoint.h"
#include "include/core/SkRRect.h"
#include "include/core/SkRect.h"
// Represents an arc along an oval boundary, or a closed wedge of the oval.
struct GrArc {
SkRect fOval; // The sorted, bounding box defining the oval the arc is traced along
SkScalar fStartAngle; // In degrees
SkScalar fSweepAngle; // In degrees
bool fUseCenter; // True if the arc includes the center point of the oval
// Represents a line segment between two points.
struct GrLineSegment {
SkPoint fP1;
SkPoint fP2;
* GrShape is a convenience class to represent the many different specialized geometries that
* Ganesh can handle, including rects, round rects, lines, as well as paths. It is intended as
* a data-only class where any additional complex behavior is handled by an owning type (e.g.
* GrStyledShape). However, it does include some basic utilities that unify common functionality
* (such as contains()) from the underlying shape types.
* In order to have lossless simplification of the geometry, it also tracks winding direction, start
* index, and fill inversion. The direction and index are match the SkPath indexing scheme for
* the shape's type (e.g. rect, rrect, or oval).
* Regarding GrShape's empty shape:
* - GrShape uses empty to refer to the absence of any geometric data
* - SkRect::isEmpty() returns true if the rect is not sorted, even if it has area. GrShape will not
* simplify these shapes to an empty GrShape. Rects with actual 0 width and height will simplify
* to a point or line, not empty. This is to preserve geometric data for path effects and strokes.
* - SkRRect::isEmpty() is true when the bounds have 0 width or height, so GrShape will simplify it
* to a point or line, just like a rect. SkRRect does not have the concept of unsorted edges.
class GrShape {
// The current set of types GrShape can represent directly
enum class Type : uint8_t {
kEmpty, kPoint, kRect, kRRect, kPath, kArc, kLine
static constexpr int kTypeCount = static_cast<int>(Type::kLine) + 1;
// The direction and start index used when a shape does not have a representable winding,
// or when that information was discarded during simplification (kIgnoreWinding_Flag).
static constexpr SkPathDirection kDefaultDir = SkPathDirection::kCW;
static constexpr unsigned kDefaultStart = 0;
// The fill rule that is used by asPath() for shapes that aren't already a path.
static constexpr SkPathFillType kDefaultFillType = SkPathFillType::kEvenOdd;
GrShape() {}
explicit GrShape(const SkPoint& point) { this->setPoint(point); }
explicit GrShape(const SkRect& rect) { this->setRect(rect); }
explicit GrShape(const SkRRect& rrect) { this->setRRect(rrect); }
explicit GrShape(const SkPath& path) { this->setPath(path); }
explicit GrShape(const GrArc& arc) { this->setArc(arc); }
explicit GrShape(const GrLineSegment& line){ this->setLine(line); }
GrShape(const GrShape& shape) { *this = shape; }
~GrShape() { this->reset(); }
// NOTE: None of the geometry types benefit from move semantics, so we don't bother
// defining a move assignment operator for GrShape.
GrShape& operator=(const GrShape& shape);
// These type queries reflect the shape type provided when assigned, it does not incorporate
// any potential simplification (e.g. if isRRect() is true and rrect().isRect() is true,
// isRect() will still be false, until simplify() is called).
bool isEmpty() const { return this->type() == Type::kEmpty; }
bool isPoint() const { return this->type() == Type::kPoint; }
bool isRect() const { return this->type() == Type::kRect; }
bool isRRect() const { return this->type() == Type::kRRect; }
bool isPath() const { return this->type() == Type::kPath; }
bool isArc() const { return this->type() == Type::kArc; }
bool isLine() const { return this->type() == Type::kLine; }
Type type() const { return fType; }
// Report the shape type, winding direction, start index, and invertedness as a value suitable
// for use in a resource key. This does not include any geometry coordinates into the key value.
uint32_t stateKey() const;
// Whether or not the shape is meant to be the inverse of its geometry (i.e. its exterior).
bool inverted() const {
return this->isPath() ? fPath.isInverseFillType() : SkToBool(fInverted);
// Returns the path direction extracted from the path during simplification, if the shape's
// type represents a rrect, rect, or oval.
SkPathDirection dir() const { return fCW ? SkPathDirection::kCW : SkPathDirection::kCCW; }
// Returns the start index extracted from the path during simplification, if the shape's
// type represents a rrect, rect, or oval.
unsigned startIndex() const { return fStart; }
// Override the direction and start parameters for the simplified contour. These are only
// meaningful for rects, rrects, and ovals.
void setPathWindingParams(SkPathDirection dir, unsigned start) {
SkASSERT((this->isRect() && start < 4) || (this->isRRect() && start < 8) ||
(dir == kDefaultDir && start == kDefaultStart));
fCW = dir == SkPathDirection::kCW;
fStart = static_cast<uint8_t>(start);
void setInverted(bool inverted) {
if (this->isPath()) {
if (inverted != fPath.isInverseFillType()) {
} else {
fInverted = inverted;
// Access the actual geometric description of the shape. May only access the appropriate type
// based on what was last set. The type may change after simplify() is called.
SkPoint& point() { SkASSERT(this->isPoint()); return fPoint; }
const SkPoint& point() const { SkASSERT(this->isPoint()); return fPoint; }
SkRect& rect() { SkASSERT(this->isRect()); return fRect; }
const SkRect& rect() const { SkASSERT(this->isRect()); return fRect; }
SkRRect& rrect() { SkASSERT(this->isRRect()); return fRRect; }
const SkRRect& rrect() const { SkASSERT(this->isRRect()); return fRRect; }
SkPath& path() { SkASSERT(this->isPath()); return fPath; }
const SkPath& path() const { SkASSERT(this->isPath()); return fPath; }
GrArc& arc() { SkASSERT(this->isArc()); return fArc; }
const GrArc& arc() const { SkASSERT(this->isArc()); return fArc; }
GrLineSegment& line() { SkASSERT(this->isLine()); return fLine; }
const GrLineSegment& line() const { SkASSERT(this->isLine()); return fLine; }
// Update the geometry stored in the GrShape and update its associated type to match. This
// performs no simplification, so calling setRRect() with a round rect that has isRect() return
// true will still be considered an rrect by this shape until simplify() is called.
// These also reset any extracted direction, start, and inverted state from a prior simplified
// path, since these functions ared used to describe a new geometry.
void setPoint(const SkPoint& point) {
fPoint = point;
void setRect(const SkRect& rect) {
fRect = rect;
void setRRect(const SkRRect& rrect) {
fRRect = rrect;
void setArc(const GrArc& arc) {
fArc = arc;
void setLine(const GrLineSegment& line) {
fLine = line;
void setPath(const SkPath& path) {
if (this->isPath()) {
// Assign directly
fPath = path;
} else {
// In-place initialize
new (&fPath) SkPath(path);
// Must also set these since we didn't call reset() like other setX functions.
this->setPathWindingParams(kDefaultDir, kDefaultStart);
fInverted = path.isInverseFillType();
void reset() {
// Flags that enable more aggressive, "destructive" simplifications to the geometry
enum SimplifyFlags : unsigned {
// If set, it is assumed the original shape would have been implicitly filled when drawn or
// clipped, so simpler shape types that are closed can still be considered. Shapes with
// 0 area (i.e. points and lines) can be turned into empty.
kSimpleFill_Flag = 0b001,
// If set, simplifications that would impact a directional stroke or path effect can still
// be taken (e.g. dir and start are not required, arcs can be converted to ovals).
kIgnoreWinding_Flag = 0b010,
// If set, the geometry will be updated to have sorted coordinates (rects, lines), modulated
// sweep angles (arcs).
kMakeCanonical_Flag = 0b100,
kAll_Flags = 0b111
// Returns true if the shape was originally closed based on type (or detected type within a
// path), even if the final simplification results in a point, line, or empty.
bool simplify(unsigned flags = kAll_Flags);
// True if the given bounding box is completely inside the shape, if it's conservatively treated
// as a filled, closed shape.
bool conservativeContains(const SkRect& rect) const;
bool conservativeContains(const SkPoint& point) const;
// True if the underlying geometry represents a closed shape, without the need for an
// implicit close (note that if simplified earlier with 'simpleFill' = true, a shape that was
// not closed may become closed).
bool closed() const;
// True if the underlying shape is known to be convex, assuming no other styles. If 'simpleFill'
// is true, it is assumed the contours will be implicitly closed when drawn or used.
bool convex(bool simpleFill = true) const;
// The bounding box of the shape.
SkRect bounds() const;
// The segment masks that describe the shape, were it to be converted to an SkPath
uint32_t segmentMask() const;
// Convert the shape into a path that describes the same geometry.
void asPath(SkPath* out, bool simpleFill = true) const;
void setType(Type type) {
if (this->isPath() && type != Type::kPath) {
fInverted = fPath.isInverseFillType();
fType = type;
void reset(Type type) {
this->setPathWindingParams(kDefaultDir, kDefaultStart);
// Paths and arcs are root shapes, another type will never simplify to them, so they do
// not take the geometry to simplify as an argument. Since they are root shapes, they also
// return whether or not they were originally closed before being simplified.
bool simplifyPath(unsigned flags);
bool simplifyArc(unsigned flags);
// The simpler type classes do take the geometry because it may represent an in-progress
// simplification that hasn't been set on the GrShape yet. The simpler types do not report
// whether or not they were closed because it's implicit in their type.
void simplifyLine(const SkPoint& p1, const SkPoint& p2, unsigned flags);
void simplifyPoint(const SkPoint& point, unsigned flags);
// RRects and rects care about winding for path effects and will set the path winding state
// of the shape as well.
void simplifyRRect(const SkRRect& rrect, SkPathDirection dir, unsigned start, unsigned flags);
void simplifyRect(const SkRect& rect, SkPathDirection dir, unsigned start, unsigned flags);
union {
SkPoint fPoint;
SkRect fRect;
SkRRect fRRect;
SkPath fPath;
GrArc fArc;
GrLineSegment fLine;
Type fType = Type::kEmpty;
uint8_t fStart; // Restricted to rrects and simpler, so this will be < 8
bool fCW;
bool fInverted;