| /* |
| * Copyright 2020 Google LLC. |
| * |
| * Use of this source code is governed by a BSD-style license that can be |
| * found in the LICENSE file. |
| */ |
| |
| #include "src/gpu/tessellate/GrStrokeTessellateOp.h" |
| |
| #include "src/core/SkPathPriv.h" |
| #include "src/gpu/GrRecordingContextPriv.h" |
| #include "src/gpu/geometry/GrPathUtils.h" |
| #include "src/gpu/tessellate/GrWangsFormula.h" |
| |
| using Patch = GrStrokeTessellateShader::Patch; |
| |
| void GrStrokeTessellateOp::onPrePrepare(GrRecordingContext* context, |
| const GrSurfaceProxyView& writeView, GrAppliedClip* clip, |
| const GrXferProcessor::DstProxyView& dstProxyView, |
| GrXferBarrierFlags renderPassXferBarriers, |
| GrLoadOp colorLoadOp) { |
| this->prePreparePrograms(GrStrokeTessellateShader::Mode::kTessellation, |
| context->priv().recordTimeAllocator(), writeView, |
| (clip) ? std::move(*clip) : GrAppliedClip::Disabled(), dstProxyView, |
| renderPassXferBarriers, colorLoadOp, *context->priv().caps()); |
| if (fStencilProgram) { |
| context->priv().recordProgramInfo(fStencilProgram); |
| } |
| if (fFillProgram) { |
| context->priv().recordProgramInfo(fFillProgram); |
| } |
| } |
| |
| void GrStrokeTessellateOp::onPrepare(GrOpFlushState* flushState) { |
| if (!fFillProgram && !fStencilProgram) { |
| this->prePreparePrograms(GrStrokeTessellateShader::Mode::kTessellation, |
| flushState->allocator(), flushState->writeView(), |
| flushState->detachAppliedClip(), flushState->dstProxyView(), |
| flushState->renderPassBarriers(), flushState->colorLoadOp(), |
| flushState->caps()); |
| } |
| SkASSERT(fFillProgram || fStencilProgram); |
| |
| fTarget = flushState; |
| this->prepareBuffers(); |
| fTarget = nullptr; |
| } |
| |
| static float pow4(float x) { |
| float xx = x*x; |
| return xx*xx; |
| } |
| |
| void GrStrokeTessellateOp::prepareBuffers() { |
| SkASSERT(fTarget); |
| |
| // Subtract 2 because the tessellation shader chops every cubic at two locations, and each chop |
| // has the potential to introduce an extra segment. |
| fMaxTessellationSegments = fTarget->caps().shaderCaps()->maxTessellationSegments() - 2; |
| |
| fTolerances = this->preTransformTolerances(); |
| |
| // Calculate the worst-case numbers of parametric segments our hardware can support for the |
| // current stroke radius, in the event that there are also enough radial segments to rotate |
| // 180 and 360 degrees respectively. These are used for "quick accepts" that allow us to |
| // send almost all curves directly to the hardware without having to chop. |
| float numRadialSegments180 = std::max(std::ceil( |
| SK_ScalarPI * fTolerances.fNumRadialSegmentsPerRadian), 1.f); |
| float maxParametricSegments180 = NumParametricSegments(fMaxTessellationSegments, |
| numRadialSegments180); |
| fMaxParametricSegments180_pow4 = pow4(maxParametricSegments180); |
| |
| float numRadialSegments360 = std::max(std::ceil( |
| 2*SK_ScalarPI * fTolerances.fNumRadialSegmentsPerRadian), 1.f); |
| float maxParametricSegments360 = NumParametricSegments(fMaxTessellationSegments, |
| numRadialSegments360); |
| fMaxParametricSegments360_pow4 = pow4(maxParametricSegments360); |
| |
| // Now calculate the worst-case numbers of parametric segments if we are to integrate a join |
| // into the same patch as the curve. |
| float maxNumSegmentsInJoin; |
| switch (fStroke.getJoin()) { |
| case SkPaint::kBevel_Join: |
| maxNumSegmentsInJoin = 1; |
| break; |
| case SkPaint::kMiter_Join: |
| maxNumSegmentsInJoin = 2; |
| break; |
| case SkPaint::kRound_Join: |
| // 180-degree round join. |
| maxNumSegmentsInJoin = numRadialSegments180; |
| break; |
| } |
| // Subtract an extra 1 off the end because when we integrate a join, the tessellator has to add |
| // a redundant edge between the join and curve. |
| fMaxParametricSegments180_pow4_withJoin = pow4(std::max( |
| maxParametricSegments180 - maxNumSegmentsInJoin - 1, 0.f)); |
| fMaxParametricSegments360_pow4_withJoin = pow4(std::max( |
| maxParametricSegments360 - maxNumSegmentsInJoin - 1, 0.f)); |
| fMaxCombinedSegments_withJoin = fMaxTessellationSegments - maxNumSegmentsInJoin - 1; |
| fSoloRoundJoinAlwaysFitsInPatch = (numRadialSegments180 <= fMaxTessellationSegments); |
| |
| // Pre-allocate at least enough vertex space for 1 in 4 strokes to chop, and for 8 caps. |
| int strokePreallocCount = fTotalCombinedVerbCnt * 5/4; |
| int capPreallocCount = 8; |
| this->allocPatchChunkAtLeast(strokePreallocCount + capPreallocCount); |
| |
| for (const SkPath& path : fPathList) { |
| fHasLastControlPoint = false; |
| SkDEBUGCODE(fHasCurrentPoint = false;) |
| SkPathVerb previousVerb = SkPathVerb::kClose; |
| for (auto [verb, pts, w] : SkPathPriv::Iterate(path)) { |
| switch (verb) { |
| case SkPathVerb::kMove: |
| // "A subpath ... consisting of a single moveto shall not be stroked." |
| // https://www.w3.org/TR/SVG11/painting.html#StrokeProperties |
| if (previousVerb != SkPathVerb::kMove && previousVerb != SkPathVerb::kClose) { |
| this->cap(); |
| } |
| this->moveTo(pts[0]); |
| break; |
| case SkPathVerb::kLine: |
| SkASSERT(fHasCurrentPoint); |
| SkASSERT(pts[0] == fCurrentPoint); |
| this->lineTo(pts[1]); |
| break; |
| case SkPathVerb::kQuad: |
| this->quadraticTo(pts); |
| break; |
| case SkPathVerb::kCubic: |
| this->cubicTo(pts); |
| break; |
| case SkPathVerb::kConic: |
| SkUNREACHABLE; |
| case SkPathVerb::kClose: |
| this->close(); |
| break; |
| } |
| previousVerb = verb; |
| } |
| if (previousVerb != SkPathVerb::kMove && previousVerb != SkPathVerb::kClose) { |
| this->cap(); |
| } |
| } |
| } |
| |
| void GrStrokeTessellateOp::moveTo(SkPoint pt) { |
| fCurrentPoint = fCurrContourStartPoint = pt; |
| fHasLastControlPoint = false; |
| SkDEBUGCODE(fHasCurrentPoint = true;) |
| } |
| |
| void GrStrokeTessellateOp::moveTo(SkPoint pt, SkPoint lastControlPoint) { |
| fCurrentPoint = fCurrContourStartPoint = pt; |
| fCurrContourFirstControlPoint = fLastControlPoint = lastControlPoint; |
| fHasLastControlPoint = true; |
| SkDEBUGCODE(fHasCurrentPoint = true;) |
| } |
| |
| void GrStrokeTessellateOp::lineTo(SkPoint pt, JoinType prevJoinType) { |
| SkASSERT(fHasCurrentPoint); |
| |
| // Zero-length paths need special treatment because they are spec'd to behave differently. |
| if (pt == fCurrentPoint) { |
| return; |
| } |
| |
| if (fMaxCombinedSegments_withJoin < 1 || prevJoinType == JoinType::kCusp) { |
| // Either the stroke has extremely thick round joins and there aren't enough guaranteed |
| // segments to always combine a join with a line patch, or we need a cusp. Either way we |
| // handle the join in its own separate patch. |
| this->joinTo(prevJoinType, pt); |
| prevJoinType = JoinType::kNone; |
| } |
| |
| SkPoint asCubic[4] = {fCurrentPoint, fCurrentPoint, pt, pt}; |
| this->cubicToRaw(prevJoinType, asCubic); |
| } |
| |
| static bool chop_pt_is_cusp(const SkPoint& prevControlPoint, const SkPoint& chopPoint, |
| const SkPoint& nextControlPoint) { |
| // Adjacent chops should almost always be colinear. The only case where they will not be is a |
| // cusp, which will rotate a minimum of 180 degrees. |
| return (nextControlPoint - chopPoint).dot(chopPoint - prevControlPoint) <= 0; |
| } |
| |
| static bool quad_chop_is_cusp(const SkPoint chops[5]) { |
| SkPoint chopPt = chops[2]; |
| SkPoint prevCtrlPt = (chops[1] != chopPt) ? chops[1] : chops[0]; |
| SkPoint nextCtrlPt = (chops[3] != chopPt) ? chops[3] : chops[4]; |
| return chop_pt_is_cusp(prevCtrlPt, chopPt, nextCtrlPt); |
| } |
| |
| void GrStrokeTessellateOp::quadraticTo(const SkPoint p[3], JoinType prevJoinType, int maxDepth) { |
| SkASSERT(fHasCurrentPoint); |
| SkASSERT(p[0] == fCurrentPoint); |
| |
| // Zero-length paths need special treatment because they are spec'd to behave differently. If |
| // the control point is colocated on an endpoint then this might end up being the case. Fall |
| // back on a lineTo and let it make the final check. |
| if (p[1] == p[0] || p[1] == p[2]) { |
| this->lineTo(p[2], prevJoinType); |
| return; |
| } |
| |
| // Convert to a cubic. |
| SkPoint asCubic[4]; |
| GrPathUtils::convertQuadToCubic(p, asCubic); |
| |
| // Ensure our hardware supports enough tessellation segments to render the curve. This early out |
| // assumes a worst-case quadratic rotation of 180 degrees and a worst-case number of segments in |
| // the join. |
| // |
| // An informal survey of skottie animations and gms revealed that even with a bare minimum of 64 |
| // tessellation segments, 99.9%+ of quadratics take this early out. |
| float numParametricSegments_pow4 = |
| GrWangsFormula::quadratic_pow4(fTolerances.fParametricIntolerance, p); |
| if (numParametricSegments_pow4 <= fMaxParametricSegments180_pow4_withJoin && |
| prevJoinType != JoinType::kCusp) { |
| this->cubicToRaw(prevJoinType, asCubic); |
| return; |
| } |
| |
| if (numParametricSegments_pow4 <= fMaxParametricSegments180_pow4 || maxDepth == 0) { |
| if (numParametricSegments_pow4 > fMaxParametricSegments180_pow4_withJoin || |
| prevJoinType == JoinType::kCusp) { |
| // Either there aren't enough guaranteed segments to include the join in the quadratic's |
| // patch, or we need a cusp. Emit a standalone patch for the join. |
| this->joinTo(prevJoinType, asCubic); |
| prevJoinType = JoinType::kNone; |
| } |
| this->cubicToRaw(prevJoinType, asCubic); |
| return; |
| } |
| |
| // We still might have enough tessellation segments to render the curve. Check again with the |
| // actual rotation. |
| float numRadialSegments = SkMeasureQuadRotation(p) * fTolerances.fNumRadialSegmentsPerRadian; |
| numRadialSegments = std::max(std::ceil(numRadialSegments), 1.f); |
| float numParametricSegments = GrWangsFormula::root4(numParametricSegments_pow4); |
| numParametricSegments = std::max(std::ceil(numParametricSegments), 1.f); |
| float numCombinedSegments = NumCombinedSegments(numParametricSegments, numRadialSegments); |
| if (numCombinedSegments > fMaxTessellationSegments) { |
| // The hardware doesn't support enough segments for this curve. Chop and recurse. |
| if (maxDepth < 0) { |
| // Decide on an extremely conservative upper bound for when to quit chopping. This |
| // is solely to protect us from infinite recursion in instances where FP error |
| // prevents us from chopping at the correct midtangent. |
| maxDepth = sk_float_nextlog2(numParametricSegments) + |
| sk_float_nextlog2(numRadialSegments) + 1; |
| maxDepth = std::max(maxDepth, 1); |
| } |
| SkPoint chops[5]; |
| if (numParametricSegments >= numRadialSegments) { |
| SkChopQuadAtHalf(p, chops); |
| } else { |
| SkChopQuadAtMidTangent(p, chops); |
| } |
| this->quadraticTo(chops, prevJoinType, maxDepth - 1); |
| // If we chopped at a cusp then rotation is not continuous between the two curves. Insert a |
| // cusp to make up for lost rotation. |
| JoinType nextJoinType = (quad_chop_is_cusp(chops)) ? |
| JoinType::kCusp : JoinType::kFromStroke; |
| this->quadraticTo(chops + 2, nextJoinType, maxDepth - 1); |
| return; |
| } |
| |
| if (numCombinedSegments > fMaxCombinedSegments_withJoin || |
| prevJoinType == JoinType::kCusp) { |
| // Either there aren't enough guaranteed segments to include the join in the quadratic's |
| // patch, or we need a cusp. Emit a standalone patch for the join. |
| this->joinTo(prevJoinType, asCubic); |
| prevJoinType = JoinType::kNone; |
| } |
| this->cubicToRaw(prevJoinType, asCubic); |
| } |
| |
| static bool cubic_chop_is_cusp(const SkPoint chops[7]) { |
| SkPoint chopPt = chops[3]; |
| auto prevCtrlPt = (chops[2] != chopPt) ? chops[2] : (chops[1] != chopPt) ? chops[1] : chops[0]; |
| auto nextCtrlPt = (chops[4] != chopPt) ? chops[4] : (chops[5] != chopPt) ? chops[5] : chops[6]; |
| return chop_pt_is_cusp(prevCtrlPt, chopPt, nextCtrlPt); |
| } |
| |
| void GrStrokeTessellateOp::cubicTo(const SkPoint p[4], JoinType prevJoinType, |
| Convex180Status convex180Status, int maxDepth) { |
| SkASSERT(fHasCurrentPoint); |
| SkASSERT(p[0] == fCurrentPoint); |
| |
| // The stroke tessellation shader assigns special meaning to p0==p1==p2 and p1==p2==p3. If this |
| // is the case then we need to rewrite the cubic. |
| if (p[1] == p[2] && (p[1] == p[0] || p[1] == p[3])) { |
| this->lineTo(p[3], prevJoinType); |
| return; |
| } |
| |
| // Ensure our hardware supports enough tessellation segments to render the curve. This early out |
| // assumes a worst-case cubic rotation of 360 degrees and a worst-case number of segments in the |
| // join. |
| // |
| // An informal survey of skottie animations revealed that with a bare minimum of 64 tessellation |
| // segments, 95% of cubics take this early out. |
| float numParametricSegments_pow4 = |
| GrWangsFormula::cubic_pow4(fTolerances.fParametricIntolerance, p); |
| if (numParametricSegments_pow4 <= fMaxParametricSegments360_pow4_withJoin && |
| prevJoinType != JoinType::kCusp) { |
| this->cubicToRaw(prevJoinType, p); |
| return; |
| } |
| |
| float maxParametricSegments_pow4 = (convex180Status == Convex180Status::kYes) ? |
| fMaxParametricSegments180_pow4 : fMaxParametricSegments360_pow4; |
| if (numParametricSegments_pow4 <= maxParametricSegments_pow4 || maxDepth == 0) { |
| float maxParametricSegments_pow4_withJoin = (convex180Status == Convex180Status::kYes) ? |
| fMaxParametricSegments180_pow4_withJoin : fMaxParametricSegments360_pow4_withJoin; |
| if (numParametricSegments_pow4 > maxParametricSegments_pow4_withJoin || |
| prevJoinType == JoinType::kCusp) { |
| // Either there aren't enough guaranteed segments to include the join in the cubic's |
| // patch, or we need a cusp. Emit a standalone patch for the join. |
| this->joinTo(prevJoinType, p); |
| prevJoinType = JoinType::kNone; |
| } |
| this->cubicToRaw(prevJoinType, p); |
| return; |
| } |
| |
| // Ensure the curve does not inflect or rotate >180 degrees before we start subdividing and |
| // measuring rotation. |
| SkPoint chops[10]; |
| if (convex180Status == Convex180Status::kUnknown) { |
| float chopT[2]; |
| if (int n = GrPathUtils::findCubicConvex180Chops(p, chopT)) { |
| SkChopCubicAt(p, chops, chopT, n); |
| this->cubicTo(chops, prevJoinType, Convex180Status::kYes, maxDepth); |
| for (int i = 1; i <= n; ++i) { |
| // If we chopped at a cusp then rotation is not continuous between the two curves. |
| // Insert a double cusp to make up for lost rotation. |
| JoinType nextJoinType = (cubic_chop_is_cusp(chops + (i - 1)*3)) ? |
| JoinType::kCusp : JoinType::kFromStroke; |
| this->cubicTo(chops + i*3, nextJoinType, Convex180Status::kYes, maxDepth); |
| } |
| } else { |
| // The cubic was Convex180Status::kYes after all. Try again when we can use 180-degree |
| // max segment limits instead of 360. |
| this->cubicTo(p, prevJoinType, Convex180Status::kYes, maxDepth); |
| } |
| return; |
| } |
| |
| // We still might have enough tessellation segments to render the curve. Check again with |
| // its actual rotation. |
| float numRadialSegments = |
| SkMeasureNonInflectCubicRotation(p) * fTolerances.fNumRadialSegmentsPerRadian; |
| numRadialSegments = std::max(std::ceil(numRadialSegments), 1.f); |
| float numParametricSegments = GrWangsFormula::root4(numParametricSegments_pow4); |
| numParametricSegments = std::max(std::ceil(numParametricSegments), 1.f); |
| float numCombinedSegments = NumCombinedSegments(numParametricSegments, numRadialSegments); |
| if (numCombinedSegments > fMaxTessellationSegments) { |
| // The hardware doesn't support enough segments for this curve. Chop and recurse. |
| if (maxDepth < 0) { |
| // Decide on an extremely conservative upper bound for when to quit chopping. This |
| // is solely to protect us from infinite recursion in instances where FP error |
| // prevents us from chopping at the correct midtangent. |
| maxDepth = sk_float_nextlog2(numParametricSegments) + |
| sk_float_nextlog2(numRadialSegments) + 1; |
| maxDepth = std::max(maxDepth, 1); |
| } |
| if (numParametricSegments >= numRadialSegments) { |
| SkChopCubicAtHalf(p, chops); |
| } else { |
| SkChopCubicAtMidTangent(p, chops); |
| } |
| // If we chopped at a cusp then rotation is not continuous between the two curves. Insert a |
| // cusp to make up for lost rotation. |
| JoinType nextJoinType = (cubic_chop_is_cusp(chops)) ? |
| JoinType::kCusp : JoinType::kFromStroke; |
| this->cubicTo(chops, prevJoinType, Convex180Status::kYes, maxDepth - 1); |
| this->cubicTo(chops + 3, nextJoinType, Convex180Status::kYes, maxDepth - 1); |
| return; |
| } |
| |
| if (numCombinedSegments > fMaxCombinedSegments_withJoin || prevJoinType == JoinType::kCusp) { |
| // Either there aren't enough guaranteed segments to include the join in the cubic's patch, |
| // or we need a cusp. Emit a standalone patch for the join. |
| this->joinTo(prevJoinType, p); |
| prevJoinType = JoinType::kNone; |
| } |
| this->cubicToRaw(prevJoinType, p); |
| } |
| |
| void GrStrokeTessellateOp::joinTo(JoinType joinType, SkPoint nextControlPoint, int maxDepth) { |
| SkASSERT(fHasCurrentPoint); |
| |
| if (!fHasLastControlPoint) { |
| // The first stroke doesn't have a previous join. |
| return; |
| } |
| |
| if (!fSoloRoundJoinAlwaysFitsInPatch && maxDepth != 0 && |
| (fStroke.getJoin() == SkPaint::kRound_Join || joinType == JoinType::kCusp)) { |
| SkVector tan0 = fCurrentPoint - fLastControlPoint; |
| SkVector tan1 = nextControlPoint - fCurrentPoint; |
| float rotation = SkMeasureAngleBetweenVectors(tan0, tan1); |
| float numRadialSegments = rotation * fTolerances.fNumRadialSegmentsPerRadian; |
| if (numRadialSegments > fMaxTessellationSegments) { |
| // This is a round join that requires more segments than the tessellator supports. |
| // Split it and recurse. |
| if (maxDepth < 0) { |
| // Decide on an upper bound for when to quit chopping. This is solely to protect |
| // us from infinite recursion due to FP precision issues. |
| maxDepth = sk_float_nextlog2(numRadialSegments / fMaxTessellationSegments); |
| maxDepth = std::max(maxDepth, 1); |
| } |
| // Find the bisector so we can split the join in half. |
| SkPoint bisector = SkFindBisector(tan0, tan1); |
| // c0 will be the "next" control point for the first join half, and c1 will be the |
| // "previous" control point for the second join half. |
| SkPoint c0, c1; |
| // FIXME: This hack ensures "c0 - fCurrentPoint" gives the exact same ieee fp32 vector |
| // as "-(c1 - fCurrentPoint)". If our current strategy of join chopping sticks, we may |
| // want to think of a cleaner method to avoid T-junctions when we chop joins. |
| int maxAttempts = 10; |
| do { |
| bisector = (fCurrentPoint + bisector) - (fCurrentPoint - bisector); |
| c0 = fCurrentPoint + bisector; |
| c1 = fCurrentPoint - bisector; |
| } while (c0 - fCurrentPoint != -(c1 - fCurrentPoint) && --maxAttempts); |
| this->joinTo(joinType, c0, maxDepth - 1); // First join half. |
| fLastControlPoint = c1; |
| this->joinTo(joinType, nextControlPoint, maxDepth - 1); // Second join half. |
| return; |
| } |
| } |
| |
| this->joinToRaw(joinType, nextControlPoint); |
| } |
| |
| void GrStrokeTessellateOp::close() { |
| SkASSERT(fHasCurrentPoint); |
| |
| if (!fHasLastControlPoint) { |
| // Draw caps instead of closing if the subpath is zero length: |
| // |
| // "Any zero length subpath ... shall be stroked if the 'stroke-linecap' property has a |
| // value of round or square producing respectively a circle or a square." |
| // |
| // (https://www.w3.org/TR/SVG11/painting.html#StrokeProperties) |
| // |
| this->cap(); |
| return; |
| } |
| |
| // Draw a line back to the beginning. (This will be discarded if |
| // fCurrentPoint == fCurrContourStartPoint.) |
| this->lineTo(fCurrContourStartPoint); |
| this->joinTo(JoinType::kFromStroke, fCurrContourFirstControlPoint); |
| |
| fHasLastControlPoint = false; |
| SkDEBUGCODE(fHasCurrentPoint = false;) |
| } |
| |
| void GrStrokeTessellateOp::cap() { |
| SkASSERT(fHasCurrentPoint); |
| |
| if (!fHasLastControlPoint) { |
| // We don't have any control points to orient the caps. In this case, square and round caps |
| // are specified to be drawn as an axis-aligned square or circle respectively. Assign |
| // default control points that achieve this. |
| SkVector outset; |
| if (!fStroke.isHairlineStyle()) { |
| outset = {1, 0}; |
| } else { |
| // If the stroke is hairline, orient the square on the post-transform x-axis instead. |
| // We don't need to worry about the vector length since it will be normalized later. |
| // Since the matrix cannot have perspective, the below is equivalent to: |
| // |
| // outset = inverse(|a b|) * |1| * arbitrary_scale |
| // |c d| |0| |
| // |
| // == 1/det * | d -b| * |1| * arbitrary_scale |
| // |-c a| |0| |
| // |
| // == 1/det * | d| * arbitrary_scale |
| // |-c| |
| // |
| // == | d| |
| // |-c| |
| // |
| SkASSERT(!fViewMatrix.hasPerspective()); |
| float c=fViewMatrix.getSkewY(), d=fViewMatrix.getScaleY(); |
| outset = {d, -c}; |
| } |
| fCurrContourFirstControlPoint = fCurrContourStartPoint - outset; |
| fLastControlPoint = fCurrContourStartPoint + outset; |
| fCurrentPoint = fCurrContourStartPoint; |
| fHasLastControlPoint = true; |
| } |
| |
| switch (fStroke.getCap()) { |
| case SkPaint::kButt_Cap: |
| break; |
| case SkPaint::kRound_Cap: { |
| // A round cap is the same thing as a 180-degree round join. |
| // If our join type isn't round we can alternatively use a cusp. |
| JoinType roundCapJoinType = (fStroke.getJoin() == SkPaint::kRound_Join) ? |
| JoinType::kFromStroke : JoinType::kCusp; |
| this->joinTo(roundCapJoinType, fLastControlPoint); |
| this->moveTo(fCurrContourStartPoint, fCurrContourFirstControlPoint); |
| this->joinTo(roundCapJoinType, fCurrContourFirstControlPoint); |
| break; |
| } |
| case SkPaint::kSquare_Cap: { |
| // A square cap is the same as appending lineTos. |
| SkVector lastTangent = fCurrentPoint - fLastControlPoint; |
| if (!fStroke.isHairlineStyle()) { |
| // Extend the cap by 1/2 stroke width. |
| lastTangent *= (.5f * fStroke.getWidth()) / lastTangent.length(); |
| } else { |
| // Extend the cap by what will be 1/2 pixel after transformation. |
| lastTangent *= .5f / fViewMatrix.mapVector(lastTangent.fX, lastTangent.fY).length(); |
| } |
| this->lineTo(fCurrentPoint + lastTangent); |
| this->moveTo(fCurrContourStartPoint, fCurrContourFirstControlPoint); |
| SkVector firstTangent = fCurrContourFirstControlPoint - fCurrContourStartPoint; |
| if (!fStroke.isHairlineStyle()) { |
| // Set the the cap back by 1/2 stroke width. |
| firstTangent *= (-.5f * fStroke.getWidth()) / firstTangent.length(); |
| } else { |
| // Set the cap back by what will be 1/2 pixel after transformation. |
| firstTangent *= |
| -.5f / fViewMatrix.mapVector(firstTangent.fX, firstTangent.fY).length(); |
| } |
| this->lineTo(fCurrContourStartPoint + firstTangent); |
| break; |
| } |
| } |
| |
| fHasLastControlPoint = false; |
| SkDEBUGCODE(fHasCurrentPoint = false;) |
| } |
| |
| void GrStrokeTessellateOp::cubicToRaw(JoinType prevJoinType, const SkPoint pts[4]) { |
| // Cusps can't be combined with a stroke patch. They need to have been written out already as |
| // their own standalone patch. |
| SkASSERT(prevJoinType != JoinType::kCusp); |
| |
| SkPoint c1 = (pts[1] == pts[0]) ? pts[2] : pts[1]; |
| SkPoint c2 = (pts[2] == pts[3]) ? pts[1] : pts[2]; |
| |
| if (!fHasLastControlPoint) { |
| // The first stroke doesn't have a previous join (yet). If the current contour ends up |
| // closing itself, we will add that join as its own patch. |
| // TODO: Consider deferring the first stroke until we know whether the contour will close. |
| // This will allow us to use the closing join as the first patch's previous join. |
| prevJoinType = JoinType::kNone; |
| fCurrContourFirstControlPoint = c1; |
| fHasLastControlPoint = true; |
| } else { |
| // By using JoinType::kNone, the caller promises to have written out their own join that |
| // seams exactly with this curve. |
| SkASSERT((prevJoinType != JoinType::kNone) || fLastControlPoint == c1); |
| } |
| |
| if (Patch* patch = this->reservePatch()) { |
| // Disable the join section of this patch if prevJoinType is kNone by setting the previous |
| // control point equal to p0. |
| patch->fPrevControlPoint = (prevJoinType == JoinType::kNone) ? pts[0] : fLastControlPoint; |
| patch->fPts = {pts[0], pts[1], pts[2], pts[3]}; |
| } |
| |
| fLastControlPoint = c2; |
| fCurrentPoint = pts[3]; |
| } |
| |
| void GrStrokeTessellateOp::joinToRaw(JoinType joinType, SkPoint nextControlPoint) { |
| // We should never write out joins before the first curve. |
| SkASSERT(fHasLastControlPoint); |
| SkASSERT(fHasCurrentPoint); |
| |
| if (Patch* joinPatch = this->reservePatch()) { |
| joinPatch->fPrevControlPoint = fLastControlPoint; |
| joinPatch->fPts[0] = fCurrentPoint; |
| if (joinType == JoinType::kFromStroke) { |
| // [p0, p3, p3, p3] is a reserved pattern that means this patch is a join only (no cubic |
| // sections in the patch). |
| joinPatch->fPts[1] = joinPatch->fPts[2] = nextControlPoint; |
| } else { |
| SkASSERT(joinType == JoinType::kCusp); |
| // [p0, p0, p0, p3] is a reserved pattern that means this patch is a cusp point. |
| joinPatch->fPts[1] = joinPatch->fPts[2] = fCurrentPoint; |
| } |
| joinPatch->fPts[3] = nextControlPoint; |
| } |
| |
| fLastControlPoint = nextControlPoint; |
| } |
| |
| Patch* GrStrokeTessellateOp::reservePatch() { |
| if (fPatchChunks.back().fPatchCount >= fCurrChunkPatchCapacity) { |
| // The current chunk is full. Time to allocate a new one. (And no need to put back vertices; |
| // the buffer is full.) |
| this->allocPatchChunkAtLeast(fCurrChunkMinPatchAllocCount * 2); |
| } |
| if (!fCurrChunkPatchData) { |
| SkDebugf("WARNING: Failed to allocate vertex buffer for tessellated stroke."); |
| return nullptr; |
| } |
| SkASSERT(fPatchChunks.back().fPatchCount <= fCurrChunkPatchCapacity); |
| Patch* patch = fCurrChunkPatchData + fPatchChunks.back().fPatchCount; |
| ++fPatchChunks.back().fPatchCount; |
| return patch; |
| } |
| |
| void GrStrokeTessellateOp::allocPatchChunkAtLeast(int minPatchAllocCount) { |
| PatchChunk* chunk = &fPatchChunks.push_back(); |
| fCurrChunkPatchData = (Patch*)fTarget->makeVertexSpaceAtLeast(sizeof(Patch), minPatchAllocCount, |
| minPatchAllocCount, |
| &chunk->fPatchBuffer, |
| &chunk->fBasePatch, |
| &fCurrChunkPatchCapacity); |
| fCurrChunkMinPatchAllocCount = minPatchAllocCount; |
| } |
| |
| void GrStrokeTessellateOp::onExecute(GrOpFlushState* flushState, const SkRect& chainBounds) { |
| SkASSERT(chainBounds == this->bounds()); |
| if (fStencilProgram) { |
| flushState->bindPipelineAndScissorClip(*fStencilProgram, this->bounds()); |
| flushState->bindTextures(fStencilProgram->primProc(), nullptr, fStencilProgram->pipeline()); |
| for (const auto& chunk : fPatchChunks) { |
| if (chunk.fPatchBuffer) { |
| flushState->bindBuffers(nullptr, nullptr, std::move(chunk.fPatchBuffer)); |
| flushState->draw(chunk.fPatchCount, chunk.fBasePatch); |
| } |
| } |
| } |
| if (fFillProgram) { |
| flushState->bindPipelineAndScissorClip(*fFillProgram, this->bounds()); |
| flushState->bindTextures(fFillProgram->primProc(), nullptr, fFillProgram->pipeline()); |
| for (const auto& chunk : fPatchChunks) { |
| if (chunk.fPatchBuffer) { |
| flushState->bindBuffers(nullptr, nullptr, std::move(chunk.fPatchBuffer)); |
| flushState->draw(chunk.fPatchCount, chunk.fBasePatch); |
| } |
| } |
| } |
| } |