/* | |

* Copyright 2006 The Android Open Source Project | |

* | |

* Use of this source code is governed by a BSD-style license that can be | |

* found in the LICENSE file. | |

*/ | |

#ifndef SkRect_DEFINED | |

#define SkRect_DEFINED | |

#include "include/core/SkPoint.h" | |

#include "include/core/SkSize.h" | |

#include "include/private/SkSafe32.h" | |

#include "include/private/SkTFitsIn.h" | |

#include <algorithm> | |

#include <utility> | |

struct SkRect; | |

/** \struct SkIRect | |

SkIRect holds four 32-bit integer coordinates describing the upper and | |

lower bounds of a rectangle. SkIRect may be created from outer bounds or | |

from position, width, and height. SkIRect describes an area; if its right | |

is less than or equal to its left, or if its bottom is less than or equal to | |

its top, it is considered empty. | |

*/ | |

struct SK_API SkIRect { | |

int32_t fLeft; //!< smaller x-axis bounds | |

int32_t fTop; //!< smaller y-axis bounds | |

int32_t fRight; //!< larger x-axis bounds | |

int32_t fBottom; //!< larger y-axis bounds | |

/** Returns constructed SkIRect set to (0, 0, 0, 0). | |

Many other rectangles are empty; if left is equal to or greater than right, | |

or if top is equal to or greater than bottom. Setting all members to zero | |

is a convenience, but does not designate a special empty rectangle. | |

@return bounds (0, 0, 0, 0) | |

*/ | |

static constexpr SkIRect SK_WARN_UNUSED_RESULT MakeEmpty() { | |

return SkIRect{0, 0, 0, 0}; | |

} | |

/** Returns constructed SkIRect set to (0, 0, w, h). Does not validate input; w or h | |

may be negative. | |

@param w width of constructed SkIRect | |

@param h height of constructed SkIRect | |

@return bounds (0, 0, w, h) | |

*/ | |

static constexpr SkIRect SK_WARN_UNUSED_RESULT MakeWH(int32_t w, int32_t h) { | |

return SkIRect{0, 0, w, h}; | |

} | |

/** Returns constructed SkIRect set to (0, 0, size.width(), size.height()). | |

Does not validate input; size.width() or size.height() may be negative. | |

@param size values for SkIRect width and height | |

@return bounds (0, 0, size.width(), size.height()) | |

*/ | |

static constexpr SkIRect SK_WARN_UNUSED_RESULT MakeSize(const SkISize& size) { | |

return SkIRect{0, 0, size.fWidth, size.fHeight}; | |

} | |

/** Returns constructed SkIRect set to (pt.x(), pt.y(), pt.x() + size.width(), | |

pt.y() + size.height()). Does not validate input; size.width() or size.height() may be | |

negative. | |

@param pt values for SkIRect fLeft and fTop | |

@param size values for SkIRect width and height | |

@return bounds at pt with width and height of size | |

*/ | |

static constexpr SkIRect SK_WARN_UNUSED_RESULT MakePtSize(SkIPoint pt, SkISize size) { | |

return MakeXYWH(pt.x(), pt.y(), size.width(), size.height()); | |

} | |

/** Returns constructed SkIRect set to (l, t, r, b). Does not sort input; SkIRect may | |

result in fLeft greater than fRight, or fTop greater than fBottom. | |

@param l integer stored in fLeft | |

@param t integer stored in fTop | |

@param r integer stored in fRight | |

@param b integer stored in fBottom | |

@return bounds (l, t, r, b) | |

*/ | |

static constexpr SkIRect SK_WARN_UNUSED_RESULT MakeLTRB(int32_t l, int32_t t, | |

int32_t r, int32_t b) { | |

return SkIRect{l, t, r, b}; | |

} | |

/** Returns constructed SkIRect set to: (x, y, x + w, y + h). | |

Does not validate input; w or h may be negative. | |

@param x stored in fLeft | |

@param y stored in fTop | |

@param w added to x and stored in fRight | |

@param h added to y and stored in fBottom | |

@return bounds at (x, y) with width w and height h | |

*/ | |

static constexpr SkIRect SK_WARN_UNUSED_RESULT MakeXYWH(int32_t x, int32_t y, | |

int32_t w, int32_t h) { | |

return { x, y, Sk32_sat_add(x, w), Sk32_sat_add(y, h) }; | |

} | |

/** Returns left edge of SkIRect, if sorted. | |

Call sort() to reverse fLeft and fRight if needed. | |

@return fLeft | |

*/ | |

int32_t left() const { return fLeft; } | |

/** Returns top edge of SkIRect, if sorted. Call isEmpty() to see if SkIRect may be invalid, | |

and sort() to reverse fTop and fBottom if needed. | |

@return fTop | |

*/ | |

int32_t top() const { return fTop; } | |

/** Returns right edge of SkIRect, if sorted. | |

Call sort() to reverse fLeft and fRight if needed. | |

@return fRight | |

*/ | |

int32_t right() const { return fRight; } | |

/** Returns bottom edge of SkIRect, if sorted. Call isEmpty() to see if SkIRect may be invalid, | |

and sort() to reverse fTop and fBottom if needed. | |

@return fBottom | |

*/ | |

int32_t bottom() const { return fBottom; } | |

/** Returns left edge of SkIRect, if sorted. Call isEmpty() to see if SkIRect may be invalid, | |

and sort() to reverse fLeft and fRight if needed. | |

@return fLeft | |

*/ | |

int32_t x() const { return fLeft; } | |

/** Returns top edge of SkIRect, if sorted. Call isEmpty() to see if SkIRect may be invalid, | |

and sort() to reverse fTop and fBottom if needed. | |

@return fTop | |

*/ | |

int32_t y() const { return fTop; } | |

// Experimental | |

SkIPoint topLeft() const { return {fLeft, fTop}; } | |

/** Returns span on the x-axis. This does not check if SkIRect is sorted, or if | |

result fits in 32-bit signed integer; result may be negative. | |

@return fRight minus fLeft | |

*/ | |

int32_t width() const { return Sk32_can_overflow_sub(fRight, fLeft); } | |

/** Returns span on the y-axis. This does not check if SkIRect is sorted, or if | |

result fits in 32-bit signed integer; result may be negative. | |

@return fBottom minus fTop | |

*/ | |

int32_t height() const { return Sk32_can_overflow_sub(fBottom, fTop); } | |

/** Returns spans on the x-axis and y-axis. This does not check if SkIRect is sorted, | |

or if result fits in 32-bit signed integer; result may be negative. | |

@return SkISize (width, height) | |

*/ | |

SkISize size() const { return SkISize::Make(this->width(), this->height()); } | |

/** Returns span on the x-axis. This does not check if SkIRect is sorted, so the | |

result may be negative. This is safer than calling width() since width() might | |

overflow in its calculation. | |

@return fRight minus fLeft cast to int64_t | |

*/ | |

int64_t width64() const { return (int64_t)fRight - (int64_t)fLeft; } | |

/** Returns span on the y-axis. This does not check if SkIRect is sorted, so the | |

result may be negative. This is safer than calling height() since height() might | |

overflow in its calculation. | |

@return fBottom minus fTop cast to int64_t | |

*/ | |

int64_t height64() const { return (int64_t)fBottom - (int64_t)fTop; } | |

/** Returns true if fLeft is equal to or greater than fRight, or if fTop is equal | |

to or greater than fBottom. Call sort() to reverse rectangles with negative | |

width64() or height64(). | |

@return true if width64() or height64() are zero or negative | |

*/ | |

bool isEmpty64() const { return fRight <= fLeft || fBottom <= fTop; } | |

/** Returns true if width() or height() are zero or negative. | |

@return true if width() or height() are zero or negative | |

*/ | |

bool isEmpty() const { | |

int64_t w = this->width64(); | |

int64_t h = this->height64(); | |

if (w <= 0 || h <= 0) { | |

return true; | |

} | |

// Return true if either exceeds int32_t | |

return !SkTFitsIn<int32_t>(w | h); | |

} | |

/** Returns true if all members in a: fLeft, fTop, fRight, and fBottom; are | |

identical to corresponding members in b. | |

@param a SkIRect to compare | |

@param b SkIRect to compare | |

@return true if members are equal | |

*/ | |

friend bool operator==(const SkIRect& a, const SkIRect& b) { | |

return !memcmp(&a, &b, sizeof(a)); | |

} | |

/** Returns true if any member in a: fLeft, fTop, fRight, and fBottom; is not | |

identical to the corresponding member in b. | |

@param a SkIRect to compare | |

@param b SkIRect to compare | |

@return true if members are not equal | |

*/ | |

friend bool operator!=(const SkIRect& a, const SkIRect& b) { | |

return !(a == b); | |

} | |

/** Sets SkIRect to (0, 0, 0, 0). | |

Many other rectangles are empty; if left is equal to or greater than right, | |

or if top is equal to or greater than bottom. Setting all members to zero | |

is a convenience, but does not designate a special empty rectangle. | |

*/ | |

void setEmpty() { memset(this, 0, sizeof(*this)); } | |

/** Sets SkIRect to (left, top, right, bottom). | |

left and right are not sorted; left is not necessarily less than right. | |

top and bottom are not sorted; top is not necessarily less than bottom. | |

@param left stored in fLeft | |

@param top stored in fTop | |

@param right stored in fRight | |

@param bottom stored in fBottom | |

*/ | |

void setLTRB(int32_t left, int32_t top, int32_t right, int32_t bottom) { | |

fLeft = left; | |

fTop = top; | |

fRight = right; | |

fBottom = bottom; | |

} | |

/** Sets SkIRect to: (x, y, x + width, y + height). | |

Does not validate input; width or height may be negative. | |

@param x stored in fLeft | |

@param y stored in fTop | |

@param width added to x and stored in fRight | |

@param height added to y and stored in fBottom | |

*/ | |

void setXYWH(int32_t x, int32_t y, int32_t width, int32_t height) { | |

fLeft = x; | |

fTop = y; | |

fRight = Sk32_sat_add(x, width); | |

fBottom = Sk32_sat_add(y, height); | |

} | |

void setWH(int32_t width, int32_t height) { | |

fLeft = 0; | |

fTop = 0; | |

fRight = width; | |

fBottom = height; | |

} | |

void setSize(SkISize size) { | |

fLeft = 0; | |

fTop = 0; | |

fRight = size.width(); | |

fBottom = size.height(); | |

} | |

/** Returns SkIRect offset by (dx, dy). | |

If dx is negative, SkIRect returned is moved to the left. | |

If dx is positive, SkIRect returned is moved to the right. | |

If dy is negative, SkIRect returned is moved upward. | |

If dy is positive, SkIRect returned is moved downward. | |

@param dx offset added to fLeft and fRight | |

@param dy offset added to fTop and fBottom | |

@return SkIRect offset by dx and dy, with original width and height | |

*/ | |

constexpr SkIRect makeOffset(int32_t dx, int32_t dy) const { | |

return { | |

Sk32_sat_add(fLeft, dx), Sk32_sat_add(fTop, dy), | |

Sk32_sat_add(fRight, dx), Sk32_sat_add(fBottom, dy), | |

}; | |

} | |

/** Returns SkIRect offset by (offset.x(), offset.y()). | |

If offset.x() is negative, SkIRect returned is moved to the left. | |

If offset.x() is positive, SkIRect returned is moved to the right. | |

If offset.y() is negative, SkIRect returned is moved upward. | |

If offset.y() is positive, SkIRect returned is moved downward. | |

@param offset translation vector | |

@return SkIRect translated by offset, with original width and height | |

*/ | |

constexpr SkIRect makeOffset(SkIVector offset) const { | |

return this->makeOffset(offset.x(), offset.y()); | |

} | |

/** Returns SkIRect, inset by (dx, dy). | |

If dx is negative, SkIRect returned is wider. | |

If dx is positive, SkIRect returned is narrower. | |

If dy is negative, SkIRect returned is taller. | |

If dy is positive, SkIRect returned is shorter. | |

@param dx offset added to fLeft and subtracted from fRight | |

@param dy offset added to fTop and subtracted from fBottom | |

@return SkIRect inset symmetrically left and right, top and bottom | |

*/ | |

SkIRect makeInset(int32_t dx, int32_t dy) const { | |

return { | |

Sk32_sat_add(fLeft, dx), Sk32_sat_add(fTop, dy), | |

Sk32_sat_sub(fRight, dx), Sk32_sat_sub(fBottom, dy), | |

}; | |

} | |

/** Returns SkIRect, outset by (dx, dy). | |

If dx is negative, SkIRect returned is narrower. | |

If dx is positive, SkIRect returned is wider. | |

If dy is negative, SkIRect returned is shorter. | |

If dy is positive, SkIRect returned is taller. | |

@param dx offset subtracted to fLeft and added from fRight | |

@param dy offset subtracted to fTop and added from fBottom | |

@return SkIRect outset symmetrically left and right, top and bottom | |

*/ | |

SkIRect makeOutset(int32_t dx, int32_t dy) const { | |

return { | |

Sk32_sat_sub(fLeft, dx), Sk32_sat_sub(fTop, dy), | |

Sk32_sat_add(fRight, dx), Sk32_sat_add(fBottom, dy), | |

}; | |

} | |

/** Offsets SkIRect by adding dx to fLeft, fRight; and by adding dy to fTop, fBottom. | |

If dx is negative, moves SkIRect returned to the left. | |

If dx is positive, moves SkIRect returned to the right. | |

If dy is negative, moves SkIRect returned upward. | |

If dy is positive, moves SkIRect returned downward. | |

@param dx offset added to fLeft and fRight | |

@param dy offset added to fTop and fBottom | |

*/ | |

void offset(int32_t dx, int32_t dy) { | |

fLeft = Sk32_sat_add(fLeft, dx); | |

fTop = Sk32_sat_add(fTop, dy); | |

fRight = Sk32_sat_add(fRight, dx); | |

fBottom = Sk32_sat_add(fBottom, dy); | |

} | |

/** Offsets SkIRect by adding delta.fX to fLeft, fRight; and by adding delta.fY to | |

fTop, fBottom. | |

If delta.fX is negative, moves SkIRect returned to the left. | |

If delta.fX is positive, moves SkIRect returned to the right. | |

If delta.fY is negative, moves SkIRect returned upward. | |

If delta.fY is positive, moves SkIRect returned downward. | |

@param delta offset added to SkIRect | |

*/ | |

void offset(const SkIPoint& delta) { | |

this->offset(delta.fX, delta.fY); | |

} | |

/** Offsets SkIRect so that fLeft equals newX, and fTop equals newY. width and height | |

are unchanged. | |

@param newX stored in fLeft, preserving width() | |

@param newY stored in fTop, preserving height() | |

*/ | |

void offsetTo(int32_t newX, int32_t newY) { | |

fRight = Sk64_pin_to_s32((int64_t)fRight + newX - fLeft); | |

fBottom = Sk64_pin_to_s32((int64_t)fBottom + newY - fTop); | |

fLeft = newX; | |

fTop = newY; | |

} | |

/** Insets SkIRect by (dx,dy). | |

If dx is positive, makes SkIRect narrower. | |

If dx is negative, makes SkIRect wider. | |

If dy is positive, makes SkIRect shorter. | |

If dy is negative, makes SkIRect taller. | |

@param dx offset added to fLeft and subtracted from fRight | |

@param dy offset added to fTop and subtracted from fBottom | |

*/ | |

void inset(int32_t dx, int32_t dy) { | |

fLeft = Sk32_sat_add(fLeft, dx); | |

fTop = Sk32_sat_add(fTop, dy); | |

fRight = Sk32_sat_sub(fRight, dx); | |

fBottom = Sk32_sat_sub(fBottom, dy); | |

} | |

/** Outsets SkIRect by (dx, dy). | |

If dx is positive, makes SkIRect wider. | |

If dx is negative, makes SkIRect narrower. | |

If dy is positive, makes SkIRect taller. | |

If dy is negative, makes SkIRect shorter. | |

@param dx subtracted to fLeft and added from fRight | |

@param dy subtracted to fTop and added from fBottom | |

*/ | |

void outset(int32_t dx, int32_t dy) { this->inset(-dx, -dy); } | |

/** Adjusts SkIRect by adding dL to fLeft, dT to fTop, dR to fRight, and dB to fBottom. | |

If dL is positive, narrows SkIRect on the left. If negative, widens it on the left. | |

If dT is positive, shrinks SkIRect on the top. If negative, lengthens it on the top. | |

If dR is positive, narrows SkIRect on the right. If negative, widens it on the right. | |

If dB is positive, shrinks SkIRect on the bottom. If negative, lengthens it on the bottom. | |

The resulting SkIRect is not checked for validity. Thus, if the resulting SkIRect left is | |

greater than right, the SkIRect will be considered empty. Call sort() after this call | |

if that is not the desired behavior. | |

@param dL offset added to fLeft | |

@param dT offset added to fTop | |

@param dR offset added to fRight | |

@param dB offset added to fBottom | |

*/ | |

void adjust(int32_t dL, int32_t dT, int32_t dR, int32_t dB) { | |

fLeft = Sk32_sat_add(fLeft, dL); | |

fTop = Sk32_sat_add(fTop, dT); | |

fRight = Sk32_sat_add(fRight, dR); | |

fBottom = Sk32_sat_add(fBottom, dB); | |

} | |

/** Returns true if: fLeft <= x < fRight && fTop <= y < fBottom. | |

Returns false if SkIRect is empty. | |

Considers input to describe constructed SkIRect: (x, y, x + 1, y + 1) and | |

returns true if constructed area is completely enclosed by SkIRect area. | |

@param x test SkIPoint x-coordinate | |

@param y test SkIPoint y-coordinate | |

@return true if (x, y) is inside SkIRect | |

*/ | |

bool contains(int32_t x, int32_t y) const { | |

return x >= fLeft && x < fRight && y >= fTop && y < fBottom; | |

} | |

/** Returns true if SkIRect contains r. | |

Returns false if SkIRect is empty or r is empty. | |

SkIRect contains r when SkIRect area completely includes r area. | |

@param r SkIRect contained | |

@return true if all sides of SkIRect are outside r | |

*/ | |

bool contains(const SkIRect& r) const { | |

return !r.isEmpty() && !this->isEmpty() && // check for empties | |

fLeft <= r.fLeft && fTop <= r.fTop && | |

fRight >= r.fRight && fBottom >= r.fBottom; | |

} | |

/** Returns true if SkIRect contains r. | |

Returns false if SkIRect is empty or r is empty. | |

SkIRect contains r when SkIRect area completely includes r area. | |

@param r SkRect contained | |

@return true if all sides of SkIRect are outside r | |

*/ | |

inline bool contains(const SkRect& r) const; | |

/** Returns true if SkIRect contains construction. | |

Asserts if SkIRect is empty or construction is empty, and if SK_DEBUG is defined. | |

Return is undefined if SkIRect is empty or construction is empty. | |

@param r SkIRect contained | |

@return true if all sides of SkIRect are outside r | |

*/ | |

bool containsNoEmptyCheck(const SkIRect& r) const { | |

SkASSERT(fLeft < fRight && fTop < fBottom); | |

SkASSERT(r.fLeft < r.fRight && r.fTop < r.fBottom); | |

return fLeft <= r.fLeft && fTop <= r.fTop && fRight >= r.fRight && fBottom >= r.fBottom; | |

} | |

/** Returns true if SkIRect intersects r, and sets SkIRect to intersection. | |

Returns false if SkIRect does not intersect r, and leaves SkIRect unchanged. | |

Returns false if either r or SkIRect is empty, leaving SkIRect unchanged. | |

@param r limit of result | |

@return true if r and SkIRect have area in common | |

*/ | |

bool intersect(const SkIRect& r) { | |

return this->intersect(*this, r); | |

} | |

/** Returns true if a intersects b, and sets SkIRect to intersection. | |

Returns false if a does not intersect b, and leaves SkIRect unchanged. | |

Returns false if either a or b is empty, leaving SkIRect unchanged. | |

@param a SkIRect to intersect | |

@param b SkIRect to intersect | |

@return true if a and b have area in common | |

*/ | |

bool SK_WARN_UNUSED_RESULT intersect(const SkIRect& a, const SkIRect& b); | |

/** Returns true if a intersects b. | |

Returns false if either a or b is empty, or do not intersect. | |

@param a SkIRect to intersect | |

@param b SkIRect to intersect | |

@return true if a and b have area in common | |

*/ | |

static bool Intersects(const SkIRect& a, const SkIRect& b) { | |

return SkIRect{}.intersect(a, b); | |

} | |

/** Sets SkIRect to the union of itself and r. | |

Has no effect if r is empty. Otherwise, if SkIRect is empty, sets SkIRect to r. | |

@param r expansion SkIRect | |

example: https://fiddle.skia.org/c/@IRect_join_2 | |

*/ | |

void join(const SkIRect& r); | |

/** Swaps fLeft and fRight if fLeft is greater than fRight; and swaps | |

fTop and fBottom if fTop is greater than fBottom. Result may be empty, | |

and width() and height() will be zero or positive. | |

*/ | |

void sort() { | |

using std::swap; | |

if (fLeft > fRight) { | |

swap(fLeft, fRight); | |

} | |

if (fTop > fBottom) { | |

swap(fTop, fBottom); | |

} | |

} | |

/** Returns SkIRect with fLeft and fRight swapped if fLeft is greater than fRight; and | |

with fTop and fBottom swapped if fTop is greater than fBottom. Result may be empty; | |

and width() and height() will be zero or positive. | |

@return sorted SkIRect | |

*/ | |

SkIRect makeSorted() const { | |

return MakeLTRB(std::min(fLeft, fRight), std::min(fTop, fBottom), | |

std::max(fLeft, fRight), std::max(fTop, fBottom)); | |

} | |

}; | |

/** \struct SkRect | |

SkRect holds four SkScalar coordinates describing the upper and | |

lower bounds of a rectangle. SkRect may be created from outer bounds or | |

from position, width, and height. SkRect describes an area; if its right | |

is less than or equal to its left, or if its bottom is less than or equal to | |

its top, it is considered empty. | |

*/ | |

struct SK_API SkRect { | |

SkScalar fLeft; //!< smaller x-axis bounds | |

SkScalar fTop; //!< smaller y-axis bounds | |

SkScalar fRight; //!< larger x-axis bounds | |

SkScalar fBottom; //!< larger y-axis bounds | |

/** Returns constructed SkRect set to (0, 0, 0, 0). | |

Many other rectangles are empty; if left is equal to or greater than right, | |

or if top is equal to or greater than bottom. Setting all members to zero | |

is a convenience, but does not designate a special empty rectangle. | |

@return bounds (0, 0, 0, 0) | |

*/ | |

static constexpr SkRect SK_WARN_UNUSED_RESULT MakeEmpty() { | |

return SkRect{0, 0, 0, 0}; | |

} | |

/** Returns constructed SkRect set to SkScalar values (0, 0, w, h). Does not | |

validate input; w or h may be negative. | |

Passing integer values may generate a compiler warning since SkRect cannot | |

represent 32-bit integers exactly. Use SkIRect for an exact integer rectangle. | |

@param w SkScalar width of constructed SkRect | |

@param h SkScalar height of constructed SkRect | |

@return bounds (0, 0, w, h) | |

*/ | |

static constexpr SkRect SK_WARN_UNUSED_RESULT MakeWH(SkScalar w, SkScalar h) { | |

return SkRect{0, 0, w, h}; | |

} | |

/** Returns constructed SkRect set to integer values (0, 0, w, h). Does not validate | |

input; w or h may be negative. | |

Use to avoid a compiler warning that input may lose precision when stored. | |

Use SkIRect for an exact integer rectangle. | |

@param w integer width of constructed SkRect | |

@param h integer height of constructed SkRect | |

@return bounds (0, 0, w, h) | |

*/ | |

static SkRect SK_WARN_UNUSED_RESULT MakeIWH(int w, int h) { | |

return {0, 0, SkIntToScalar(w), SkIntToScalar(h)}; | |

} | |

/** Returns constructed SkRect set to (0, 0, size.width(), size.height()). Does not | |

validate input; size.width() or size.height() may be negative. | |

@param size SkScalar values for SkRect width and height | |

@return bounds (0, 0, size.width(), size.height()) | |

*/ | |

static constexpr SkRect SK_WARN_UNUSED_RESULT MakeSize(const SkSize& size) { | |

return SkRect{0, 0, size.fWidth, size.fHeight}; | |

} | |

/** Returns constructed SkRect set to (l, t, r, b). Does not sort input; SkRect may | |

result in fLeft greater than fRight, or fTop greater than fBottom. | |

@param l SkScalar stored in fLeft | |

@param t SkScalar stored in fTop | |

@param r SkScalar stored in fRight | |

@param b SkScalar stored in fBottom | |

@return bounds (l, t, r, b) | |

*/ | |

static constexpr SkRect SK_WARN_UNUSED_RESULT MakeLTRB(SkScalar l, SkScalar t, SkScalar r, | |

SkScalar b) { | |

return SkRect {l, t, r, b}; | |

} | |

/** Returns constructed SkRect set to (x, y, x + w, y + h). | |

Does not validate input; w or h may be negative. | |

@param x stored in fLeft | |

@param y stored in fTop | |

@param w added to x and stored in fRight | |

@param h added to y and stored in fBottom | |

@return bounds at (x, y) with width w and height h | |

*/ | |

static constexpr SkRect SK_WARN_UNUSED_RESULT MakeXYWH(SkScalar x, SkScalar y, SkScalar w, | |

SkScalar h) { | |

return SkRect {x, y, x + w, y + h}; | |

} | |

/** Returns constructed SkIRect set to (0, 0, size.width(), size.height()). | |

Does not validate input; size.width() or size.height() may be negative. | |

@param size integer values for SkRect width and height | |

@return bounds (0, 0, size.width(), size.height()) | |

*/ | |

static SkRect Make(const SkISize& size) { | |

return MakeIWH(size.width(), size.height()); | |

} | |

/** Returns constructed SkIRect set to irect, promoting integers to scalar. | |

Does not validate input; fLeft may be greater than fRight, fTop may be greater | |

than fBottom. | |

@param irect integer unsorted bounds | |

@return irect members converted to SkScalar | |

*/ | |

static SkRect SK_WARN_UNUSED_RESULT Make(const SkIRect& irect) { | |

return { | |

SkIntToScalar(irect.fLeft), SkIntToScalar(irect.fTop), | |

SkIntToScalar(irect.fRight), SkIntToScalar(irect.fBottom) | |

}; | |

} | |

/** Returns true if fLeft is equal to or greater than fRight, or if fTop is equal | |

to or greater than fBottom. Call sort() to reverse rectangles with negative | |

width() or height(). | |

@return true if width() or height() are zero or negative | |

*/ | |

bool isEmpty() const { | |

// We write it as the NOT of a non-empty rect, so we will return true if any values | |

// are NaN. | |

return !(fLeft < fRight && fTop < fBottom); | |

} | |

/** Returns true if fLeft is equal to or less than fRight, or if fTop is equal | |

to or less than fBottom. Call sort() to reverse rectangles with negative | |

width() or height(). | |

@return true if width() or height() are zero or positive | |

*/ | |

bool isSorted() const { return fLeft <= fRight && fTop <= fBottom; } | |

/** Returns true if all values in the rectangle are finite: SK_ScalarMin or larger, | |

and SK_ScalarMax or smaller. | |

@return true if no member is infinite or NaN | |

*/ | |

bool isFinite() const { | |

float accum = 0; | |

accum *= fLeft; | |

accum *= fTop; | |

accum *= fRight; | |

accum *= fBottom; | |

// accum is either NaN or it is finite (zero). | |

SkASSERT(0 == accum || SkScalarIsNaN(accum)); | |

// value==value will be true iff value is not NaN | |

// TODO: is it faster to say !accum or accum==accum? | |

return !SkScalarIsNaN(accum); | |

} | |

/** Returns left edge of SkRect, if sorted. Call isSorted() to see if SkRect is valid. | |

Call sort() to reverse fLeft and fRight if needed. | |

@return fLeft | |

*/ | |

SkScalar x() const { return fLeft; } | |

/** Returns top edge of SkRect, if sorted. Call isEmpty() to see if SkRect may be invalid, | |

and sort() to reverse fTop and fBottom if needed. | |

@return fTop | |

*/ | |

SkScalar y() const { return fTop; } | |

/** Returns left edge of SkRect, if sorted. Call isSorted() to see if SkRect is valid. | |

Call sort() to reverse fLeft and fRight if needed. | |

@return fLeft | |

*/ | |

SkScalar left() const { return fLeft; } | |

/** Returns top edge of SkRect, if sorted. Call isEmpty() to see if SkRect may be invalid, | |

and sort() to reverse fTop and fBottom if needed. | |

@return fTop | |

*/ | |

SkScalar top() const { return fTop; } | |

/** Returns right edge of SkRect, if sorted. Call isSorted() to see if SkRect is valid. | |

Call sort() to reverse fLeft and fRight if needed. | |

@return fRight | |

*/ | |

SkScalar right() const { return fRight; } | |

/** Returns bottom edge of SkRect, if sorted. Call isEmpty() to see if SkRect may be invalid, | |

and sort() to reverse fTop and fBottom if needed. | |

@return fBottom | |

*/ | |

SkScalar bottom() const { return fBottom; } | |

/** Returns span on the x-axis. This does not check if SkRect is sorted, or if | |

result fits in 32-bit float; result may be negative or infinity. | |

@return fRight minus fLeft | |

*/ | |

SkScalar width() const { return fRight - fLeft; } | |

/** Returns span on the y-axis. This does not check if SkRect is sorted, or if | |

result fits in 32-bit float; result may be negative or infinity. | |

@return fBottom minus fTop | |

*/ | |

SkScalar height() const { return fBottom - fTop; } | |

/** Returns average of left edge and right edge. Result does not change if SkRect | |

is sorted. Result may overflow to infinity if SkRect is far from the origin. | |

@return midpoint on x-axis | |

*/ | |

SkScalar centerX() const { | |

// don't use SkScalarHalf(fLeft + fBottom) as that might overflow before the 0.5 | |

return SkScalarHalf(fLeft) + SkScalarHalf(fRight); | |

} | |

/** Returns average of top edge and bottom edge. Result does not change if SkRect | |

is sorted. | |

@return midpoint on y-axis | |

*/ | |

SkScalar centerY() const { | |

// don't use SkScalarHalf(fTop + fBottom) as that might overflow before the 0.5 | |

return SkScalarHalf(fTop) + SkScalarHalf(fBottom); | |

} | |

/** Returns true if all members in a: fLeft, fTop, fRight, and fBottom; are | |

equal to the corresponding members in b. | |

a and b are not equal if either contain NaN. a and b are equal if members | |

contain zeroes with different signs. | |

@param a SkRect to compare | |

@param b SkRect to compare | |

@return true if members are equal | |

*/ | |

friend bool operator==(const SkRect& a, const SkRect& b) { | |

return SkScalarsEqual((const SkScalar*)&a, (const SkScalar*)&b, 4); | |

} | |

/** Returns true if any in a: fLeft, fTop, fRight, and fBottom; does not | |

equal the corresponding members in b. | |

a and b are not equal if either contain NaN. a and b are equal if members | |

contain zeroes with different signs. | |

@param a SkRect to compare | |

@param b SkRect to compare | |

@return true if members are not equal | |

*/ | |

friend bool operator!=(const SkRect& a, const SkRect& b) { | |

return !SkScalarsEqual((const SkScalar*)&a, (const SkScalar*)&b, 4); | |

} | |

/** Returns four points in quad that enclose SkRect ordered as: top-left, top-right, | |

bottom-right, bottom-left. | |

TODO: Consider adding parameter to control whether quad is clockwise or counterclockwise. | |

@param quad storage for corners of SkRect | |

example: https://fiddle.skia.org/c/@Rect_toQuad | |

*/ | |

void toQuad(SkPoint quad[4]) const; | |

/** Sets SkRect to (0, 0, 0, 0). | |

Many other rectangles are empty; if left is equal to or greater than right, | |

or if top is equal to or greater than bottom. Setting all members to zero | |

is a convenience, but does not designate a special empty rectangle. | |

*/ | |

void setEmpty() { *this = MakeEmpty(); } | |

/** Sets SkRect to src, promoting src members from integer to scalar. | |

Very large values in src may lose precision. | |

@param src integer SkRect | |

*/ | |

void set(const SkIRect& src) { | |

fLeft = SkIntToScalar(src.fLeft); | |

fTop = SkIntToScalar(src.fTop); | |

fRight = SkIntToScalar(src.fRight); | |

fBottom = SkIntToScalar(src.fBottom); | |

} | |

/** Sets SkRect to (left, top, right, bottom). | |

left and right are not sorted; left is not necessarily less than right. | |

top and bottom are not sorted; top is not necessarily less than bottom. | |

@param left stored in fLeft | |

@param top stored in fTop | |

@param right stored in fRight | |

@param bottom stored in fBottom | |

*/ | |

void setLTRB(SkScalar left, SkScalar top, SkScalar right, SkScalar bottom) { | |

fLeft = left; | |

fTop = top; | |

fRight = right; | |

fBottom = bottom; | |

} | |

/** Sets to bounds of SkPoint array with count entries. If count is zero or smaller, | |

or if SkPoint array contains an infinity or NaN, sets to (0, 0, 0, 0). | |

Result is either empty or sorted: fLeft is less than or equal to fRight, and | |

fTop is less than or equal to fBottom. | |

@param pts SkPoint array | |

@param count entries in array | |

*/ | |

void setBounds(const SkPoint pts[], int count) { | |

(void)this->setBoundsCheck(pts, count); | |

} | |

/** Sets to bounds of SkPoint array with count entries. Returns false if count is | |

zero or smaller, or if SkPoint array contains an infinity or NaN; in these cases | |

sets SkRect to (0, 0, 0, 0). | |

Result is either empty or sorted: fLeft is less than or equal to fRight, and | |

fTop is less than or equal to fBottom. | |

@param pts SkPoint array | |

@param count entries in array | |

@return true if all SkPoint values are finite | |

example: https://fiddle.skia.org/c/@Rect_setBoundsCheck | |

*/ | |

bool setBoundsCheck(const SkPoint pts[], int count); | |

/** Sets to bounds of SkPoint pts array with count entries. If any SkPoint in pts | |

contains infinity or NaN, all SkRect dimensions are set to NaN. | |

@param pts SkPoint array | |

@param count entries in array | |

example: https://fiddle.skia.org/c/@Rect_setBoundsNoCheck | |

*/ | |

void setBoundsNoCheck(const SkPoint pts[], int count); | |

/** Sets bounds to the smallest SkRect enclosing SkPoint p0 and p1. The result is | |

sorted and may be empty. Does not check to see if values are finite. | |

@param p0 corner to include | |

@param p1 corner to include | |

*/ | |

void set(const SkPoint& p0, const SkPoint& p1) { | |

fLeft = std::min(p0.fX, p1.fX); | |

fRight = std::max(p0.fX, p1.fX); | |

fTop = std::min(p0.fY, p1.fY); | |

fBottom = std::max(p0.fY, p1.fY); | |

} | |

/** Sets SkRect to (x, y, x + width, y + height). | |

Does not validate input; width or height may be negative. | |

@param x stored in fLeft | |

@param y stored in fTop | |

@param width added to x and stored in fRight | |

@param height added to y and stored in fBottom | |

*/ | |

void setXYWH(SkScalar x, SkScalar y, SkScalar width, SkScalar height) { | |

fLeft = x; | |

fTop = y; | |

fRight = x + width; | |

fBottom = y + height; | |

} | |

/** Sets SkRect to (0, 0, width, height). Does not validate input; | |

width or height may be negative. | |

@param width stored in fRight | |

@param height stored in fBottom | |

*/ | |

void setWH(SkScalar width, SkScalar height) { | |

fLeft = 0; | |

fTop = 0; | |

fRight = width; | |

fBottom = height; | |

} | |

void setIWH(int32_t width, int32_t height) { | |

this->setWH(SkIntToScalar(width), SkIntToScalar(height)); | |

} | |

/** Returns SkRect offset by (dx, dy). | |

If dx is negative, SkRect returned is moved to the left. | |

If dx is positive, SkRect returned is moved to the right. | |

If dy is negative, SkRect returned is moved upward. | |

If dy is positive, SkRect returned is moved downward. | |

@param dx added to fLeft and fRight | |

@param dy added to fTop and fBottom | |

@return SkRect offset on axes, with original width and height | |

*/ | |

constexpr SkRect makeOffset(SkScalar dx, SkScalar dy) const { | |

return MakeLTRB(fLeft + dx, fTop + dy, fRight + dx, fBottom + dy); | |

} | |

/** Returns SkRect offset by v. | |

@param v added to rect | |

@return SkRect offset on axes, with original width and height | |

*/ | |

constexpr SkRect makeOffset(SkVector v) const { return this->makeOffset(v.x(), v.y()); } | |

/** Returns SkRect, inset by (dx, dy). | |

If dx is negative, SkRect returned is wider. | |

If dx is positive, SkRect returned is narrower. | |

If dy is negative, SkRect returned is taller. | |

If dy is positive, SkRect returned is shorter. | |

@param dx added to fLeft and subtracted from fRight | |

@param dy added to fTop and subtracted from fBottom | |

@return SkRect inset symmetrically left and right, top and bottom | |

*/ | |

SkRect makeInset(SkScalar dx, SkScalar dy) const { | |

return MakeLTRB(fLeft + dx, fTop + dy, fRight - dx, fBottom - dy); | |

} | |

/** Returns SkRect, outset by (dx, dy). | |

If dx is negative, SkRect returned is narrower. | |

If dx is positive, SkRect returned is wider. | |

If dy is negative, SkRect returned is shorter. | |

If dy is positive, SkRect returned is taller. | |

@param dx subtracted to fLeft and added from fRight | |

@param dy subtracted to fTop and added from fBottom | |

@return SkRect outset symmetrically left and right, top and bottom | |

*/ | |

SkRect makeOutset(SkScalar dx, SkScalar dy) const { | |

return MakeLTRB(fLeft - dx, fTop - dy, fRight + dx, fBottom + dy); | |

} | |

/** Offsets SkRect by adding dx to fLeft, fRight; and by adding dy to fTop, fBottom. | |

If dx is negative, moves SkRect to the left. | |

If dx is positive, moves SkRect to the right. | |

If dy is negative, moves SkRect upward. | |

If dy is positive, moves SkRect downward. | |

@param dx offset added to fLeft and fRight | |

@param dy offset added to fTop and fBottom | |

*/ | |

void offset(SkScalar dx, SkScalar dy) { | |

fLeft += dx; | |

fTop += dy; | |

fRight += dx; | |

fBottom += dy; | |

} | |

/** Offsets SkRect by adding delta.fX to fLeft, fRight; and by adding delta.fY to | |

fTop, fBottom. | |

If delta.fX is negative, moves SkRect to the left. | |

If delta.fX is positive, moves SkRect to the right. | |

If delta.fY is negative, moves SkRect upward. | |

If delta.fY is positive, moves SkRect downward. | |

@param delta added to SkRect | |

*/ | |

void offset(const SkPoint& delta) { | |

this->offset(delta.fX, delta.fY); | |

} | |

/** Offsets SkRect so that fLeft equals newX, and fTop equals newY. width and height | |

are unchanged. | |

@param newX stored in fLeft, preserving width() | |

@param newY stored in fTop, preserving height() | |

*/ | |

void offsetTo(SkScalar newX, SkScalar newY) { | |

fRight += newX - fLeft; | |

fBottom += newY - fTop; | |

fLeft = newX; | |

fTop = newY; | |

} | |

/** Insets SkRect by (dx, dy). | |

If dx is positive, makes SkRect narrower. | |

If dx is negative, makes SkRect wider. | |

If dy is positive, makes SkRect shorter. | |

If dy is negative, makes SkRect taller. | |

@param dx added to fLeft and subtracted from fRight | |

@param dy added to fTop and subtracted from fBottom | |

*/ | |

void inset(SkScalar dx, SkScalar dy) { | |

fLeft += dx; | |

fTop += dy; | |

fRight -= dx; | |

fBottom -= dy; | |

} | |

/** Outsets SkRect by (dx, dy). | |

If dx is positive, makes SkRect wider. | |

If dx is negative, makes SkRect narrower. | |

If dy is positive, makes SkRect taller. | |

If dy is negative, makes SkRect shorter. | |

@param dx subtracted to fLeft and added from fRight | |

@param dy subtracted to fTop and added from fBottom | |

*/ | |

void outset(SkScalar dx, SkScalar dy) { this->inset(-dx, -dy); } | |

/** Returns true if SkRect intersects r, and sets SkRect to intersection. | |

Returns false if SkRect does not intersect r, and leaves SkRect unchanged. | |

Returns false if either r or SkRect is empty, leaving SkRect unchanged. | |

@param r limit of result | |

@return true if r and SkRect have area in common | |

example: https://fiddle.skia.org/c/@Rect_intersect | |

*/ | |

bool intersect(const SkRect& r); | |

/** Returns true if a intersects b, and sets SkRect to intersection. | |

Returns false if a does not intersect b, and leaves SkRect unchanged. | |

Returns false if either a or b is empty, leaving SkRect unchanged. | |

@param a SkRect to intersect | |

@param b SkRect to intersect | |

@return true if a and b have area in common | |

*/ | |

bool SK_WARN_UNUSED_RESULT intersect(const SkRect& a, const SkRect& b); | |

private: | |

static bool Intersects(SkScalar al, SkScalar at, SkScalar ar, SkScalar ab, | |

SkScalar bl, SkScalar bt, SkScalar br, SkScalar bb) { | |

SkScalar L = std::max(al, bl); | |

SkScalar R = std::min(ar, br); | |

SkScalar T = std::max(at, bt); | |

SkScalar B = std::min(ab, bb); | |

return L < R && T < B; | |

} | |

public: | |

/** Returns true if SkRect intersects r. | |

Returns false if either r or SkRect is empty, or do not intersect. | |

@param r SkRect to intersect | |

@return true if r and SkRect have area in common | |

*/ | |

bool intersects(const SkRect& r) const { | |

return Intersects(fLeft, fTop, fRight, fBottom, | |

r.fLeft, r.fTop, r.fRight, r.fBottom); | |

} | |

/** Returns true if a intersects b. | |

Returns false if either a or b is empty, or do not intersect. | |

@param a SkRect to intersect | |

@param b SkRect to intersect | |

@return true if a and b have area in common | |

*/ | |

static bool Intersects(const SkRect& a, const SkRect& b) { | |

return Intersects(a.fLeft, a.fTop, a.fRight, a.fBottom, | |

b.fLeft, b.fTop, b.fRight, b.fBottom); | |

} | |

/** Sets SkRect to the union of itself and r. | |

Has no effect if r is empty. Otherwise, if SkRect is empty, sets | |

SkRect to r. | |

@param r expansion SkRect | |

example: https://fiddle.skia.org/c/@Rect_join_2 | |

*/ | |

void join(const SkRect& r); | |

/** Sets SkRect to the union of itself and r. | |

Asserts if r is empty and SK_DEBUG is defined. | |

If SkRect is empty, sets SkRect to r. | |

May produce incorrect results if r is empty. | |

@param r expansion SkRect | |

*/ | |

void joinNonEmptyArg(const SkRect& r) { | |

SkASSERT(!r.isEmpty()); | |

// if we are empty, just assign | |

if (fLeft >= fRight || fTop >= fBottom) { | |

*this = r; | |

} else { | |

this->joinPossiblyEmptyRect(r); | |

} | |

} | |

/** Sets SkRect to the union of itself and the construction. | |

May produce incorrect results if SkRect or r is empty. | |

@param r expansion SkRect | |

*/ | |

void joinPossiblyEmptyRect(const SkRect& r) { | |

fLeft = std::min(fLeft, r.left()); | |

fTop = std::min(fTop, r.top()); | |

fRight = std::max(fRight, r.right()); | |

fBottom = std::max(fBottom, r.bottom()); | |

} | |

/** Returns true if: fLeft <= x < fRight && fTop <= y < fBottom. | |

Returns false if SkRect is empty. | |

@param x test SkPoint x-coordinate | |

@param y test SkPoint y-coordinate | |

@return true if (x, y) is inside SkRect | |

*/ | |

bool contains(SkScalar x, SkScalar y) const { | |

return x >= fLeft && x < fRight && y >= fTop && y < fBottom; | |

} | |

/** Returns true if SkRect contains r. | |

Returns false if SkRect is empty or r is empty. | |

SkRect contains r when SkRect area completely includes r area. | |

@param r SkRect contained | |

@return true if all sides of SkRect are outside r | |

*/ | |

bool contains(const SkRect& r) const { | |

// todo: can we eliminate the this->isEmpty check? | |

return !r.isEmpty() && !this->isEmpty() && | |

fLeft <= r.fLeft && fTop <= r.fTop && | |

fRight >= r.fRight && fBottom >= r.fBottom; | |

} | |

/** Returns true if SkRect contains r. | |

Returns false if SkRect is empty or r is empty. | |

SkRect contains r when SkRect area completely includes r area. | |

@param r SkIRect contained | |

@return true if all sides of SkRect are outside r | |

*/ | |

bool contains(const SkIRect& r) const { | |

// todo: can we eliminate the this->isEmpty check? | |

return !r.isEmpty() && !this->isEmpty() && | |

fLeft <= SkIntToScalar(r.fLeft) && fTop <= SkIntToScalar(r.fTop) && | |

fRight >= SkIntToScalar(r.fRight) && fBottom >= SkIntToScalar(r.fBottom); | |

} | |

/** Sets SkIRect by adding 0.5 and discarding the fractional portion of SkRect | |

members, using (SkScalarRoundToInt(fLeft), SkScalarRoundToInt(fTop), | |

SkScalarRoundToInt(fRight), SkScalarRoundToInt(fBottom)). | |

@param dst storage for SkIRect | |

*/ | |

void round(SkIRect* dst) const { | |

SkASSERT(dst); | |

dst->setLTRB(SkScalarRoundToInt(fLeft), SkScalarRoundToInt(fTop), | |

SkScalarRoundToInt(fRight), SkScalarRoundToInt(fBottom)); | |

} | |

/** Sets SkIRect by discarding the fractional portion of fLeft and fTop; and rounding | |

up fRight and fBottom, using | |

(SkScalarFloorToInt(fLeft), SkScalarFloorToInt(fTop), | |

SkScalarCeilToInt(fRight), SkScalarCeilToInt(fBottom)). | |

@param dst storage for SkIRect | |

*/ | |

void roundOut(SkIRect* dst) const { | |

SkASSERT(dst); | |

dst->setLTRB(SkScalarFloorToInt(fLeft), SkScalarFloorToInt(fTop), | |

SkScalarCeilToInt(fRight), SkScalarCeilToInt(fBottom)); | |

} | |

/** Sets SkRect by discarding the fractional portion of fLeft and fTop; and rounding | |

up fRight and fBottom, using | |

(SkScalarFloorToInt(fLeft), SkScalarFloorToInt(fTop), | |

SkScalarCeilToInt(fRight), SkScalarCeilToInt(fBottom)). | |

@param dst storage for SkRect | |

*/ | |

void roundOut(SkRect* dst) const { | |

dst->setLTRB(SkScalarFloorToScalar(fLeft), SkScalarFloorToScalar(fTop), | |

SkScalarCeilToScalar(fRight), SkScalarCeilToScalar(fBottom)); | |

} | |

/** Sets SkRect by rounding up fLeft and fTop; and discarding the fractional portion | |

of fRight and fBottom, using | |

(SkScalarCeilToInt(fLeft), SkScalarCeilToInt(fTop), | |

SkScalarFloorToInt(fRight), SkScalarFloorToInt(fBottom)). | |

@param dst storage for SkIRect | |

*/ | |

void roundIn(SkIRect* dst) const { | |

SkASSERT(dst); | |

dst->setLTRB(SkScalarCeilToInt(fLeft), SkScalarCeilToInt(fTop), | |

SkScalarFloorToInt(fRight), SkScalarFloorToInt(fBottom)); | |

} | |

/** Returns SkIRect by adding 0.5 and discarding the fractional portion of SkRect | |

members, using (SkScalarRoundToInt(fLeft), SkScalarRoundToInt(fTop), | |

SkScalarRoundToInt(fRight), SkScalarRoundToInt(fBottom)). | |

@return rounded SkIRect | |

*/ | |

SkIRect round() const { | |

SkIRect ir; | |

this->round(&ir); | |

return ir; | |

} | |

/** Sets SkIRect by discarding the fractional portion of fLeft and fTop; and rounding | |

up fRight and fBottom, using | |

(SkScalarFloorToInt(fLeft), SkScalarFloorToInt(fTop), | |

SkScalarCeilToInt(fRight), SkScalarCeilToInt(fBottom)). | |

@return rounded SkIRect | |

*/ | |

SkIRect roundOut() const { | |

SkIRect ir; | |

this->roundOut(&ir); | |

return ir; | |

} | |

/** Swaps fLeft and fRight if fLeft is greater than fRight; and swaps | |

fTop and fBottom if fTop is greater than fBottom. Result may be empty; | |

and width() and height() will be zero or positive. | |

*/ | |

void sort() { | |

using std::swap; | |

if (fLeft > fRight) { | |

swap(fLeft, fRight); | |

} | |

if (fTop > fBottom) { | |

swap(fTop, fBottom); | |

} | |

} | |

/** Returns SkRect with fLeft and fRight swapped if fLeft is greater than fRight; and | |

with fTop and fBottom swapped if fTop is greater than fBottom. Result may be empty; | |

and width() and height() will be zero or positive. | |

@return sorted SkRect | |

*/ | |

SkRect makeSorted() const { | |

return MakeLTRB(std::min(fLeft, fRight), std::min(fTop, fBottom), | |

std::max(fLeft, fRight), std::max(fTop, fBottom)); | |

} | |

/** Returns pointer to first scalar in SkRect, to treat it as an array with four | |

entries. | |

@return pointer to fLeft | |

*/ | |

const SkScalar* asScalars() const { return &fLeft; } | |

/** Writes text representation of SkRect to standard output. Set asHex to true to | |

generate exact binary representations of floating point numbers. | |

@param asHex true if SkScalar values are written as hexadecimal | |

example: https://fiddle.skia.org/c/@Rect_dump | |

*/ | |

void dump(bool asHex) const; | |

/** Writes text representation of SkRect to standard output. The representation may be | |

directly compiled as C++ code. Floating point values are written | |

with limited precision; it may not be possible to reconstruct original SkRect | |

from output. | |

*/ | |

void dump() const { this->dump(false); } | |

/** Writes text representation of SkRect to standard output. The representation may be | |

directly compiled as C++ code. Floating point values are written | |

in hexadecimal to preserve their exact bit pattern. The output reconstructs the | |

original SkRect. | |

Use instead of dump() when submitting | |

*/ | |

void dumpHex() const { this->dump(true); } | |

}; | |

inline bool SkIRect::contains(const SkRect& r) const { | |

return !r.isEmpty() && !this->isEmpty() && // check for empties | |

(SkScalar)fLeft <= r.fLeft && (SkScalar)fTop <= r.fTop && | |

(SkScalar)fRight >= r.fRight && (SkScalar)fBottom >= r.fBottom; | |

} | |

#endif |