| #!/bin/bash | |
| # | |
| # android_setup.sh: Sets environment variables used by other Android scripts. | |
| # Fail-fast if anything in the script fails. | |
| set -e | |
| BUILDTYPE=${BUILDTYPE-Debug} | |
| while (( "$#" )); do | |
| if [[ "$1" == "-d" ]]; then | |
| DEVICE_ID=$2 | |
| shift | |
| elif [[ "$1" == "-s" ]]; then | |
| DEVICE_SERIAL="-s $2" | |
| shift | |
| elif [[ "$1" == "-t" ]]; then | |
| BUILDTYPE=$2 | |
| shift | |
| elif [[ "$1" == "--release" ]]; then | |
| BUILDTYPE=Release | |
| else | |
| APP_ARGS=("${APP_ARGS[@]}" "${1}") | |
| fi | |
| shift | |
| done | |
| function verbose { | |
| if [[ -n $VERBOSE ]]; then | |
| echo $@ | |
| fi | |
| } | |
| function exportVar { | |
| NAME=$1 | |
| VALUE=$2 | |
| verbose export $NAME=\"$VALUE\" | |
| export $NAME="$VALUE" | |
| } | |
| function absPath { | |
| (cd $1; pwd) | |
| } | |
| SCRIPT_DIR=$(absPath "$(dirname "$BASH_SOURCE[0]}")") | |
| if [ -z "$ANDROID_SDK_ROOT" ]; then | |
| if ANDROID_SDK_ROOT="$(dirname $(which android))/.."; then | |
| exportVar ANDROID_SDK_ROOT $ANDROID_SDK_ROOT | |
| else | |
| echo "No ANDROID_SDK_ROOT set and can't auto detect it from location of android binary." | |
| exit 1 | |
| fi | |
| fi | |
| # check to see that gclient sync ran successfully | |
| THIRD_PARTY_EXTERNAL_DIR=${SCRIPT_DIR}/../third_party/externals | |
| if [ ! -d "$THIRD_PARTY_EXTERNAL_DIR" ]; then | |
| echo "" | |
| echo "ERROR: Unable to find the required third_party dependencies needed to build." | |
| echo " To fix this add the following line to your .gclient file and run 'gclient sync'" | |
| echo " target_os = ['android']" | |
| echo "" | |
| exit 1; | |
| fi | |
| # Helper function to configure the GYP defines to the appropriate values | |
| # based on the target device. | |
| setup_device() { | |
| DEFINES="OS=android" | |
| DEFINES="${DEFINES} host_os=$(uname -s | sed -e 's/Linux/linux/;s/Darwin/mac/')" | |
| DEFINES="${DEFINES} skia_os=android" | |
| DEFINES="${DEFINES} android_base=$(absPath ${SCRIPT_DIR}/..)" | |
| if [[ "$GYP_DEFINES" != *skia_shared_lib=* ]]; then | |
| DEFINES="${DEFINES} skia_shared_lib=1" | |
| fi | |
| # Setup the build variation depending on the target device | |
| TARGET_DEVICE="$1" | |
| if [ -z "$TARGET_DEVICE" ]; then | |
| if [ -f .android_config ]; then | |
| TARGET_DEVICE=$(cat .android_config) | |
| verbose "no target device (-d), using ${TARGET_DEVICE} from most recent build" | |
| else | |
| TARGET_DEVICE="arm_v7_thumb" | |
| verbose "no target device (-d), using ${TARGET_DEVICE}" | |
| fi | |
| fi | |
| case $TARGET_DEVICE in | |
| nexus_s) | |
| DEFINES="${DEFINES} skia_arch_type=arm arm_neon=1 arm_version=7 arm_thumb=1" | |
| DEFINES="${DEFINES} skia_resource_cache_mb_limit=24" | |
| ANDROID_ARCH="arm" | |
| ;; | |
| nexus_4 | nexus_7 | nexus_10) | |
| DEFINES="${DEFINES} skia_arch_type=arm arm_neon=1 arm_version=7 arm_thumb=1" | |
| ANDROID_ARCH="arm" | |
| ;; | |
| xoom) | |
| DEFINES="${DEFINES} skia_arch_type=arm arm_neon=0 arm_version=7 arm_thumb=1" | |
| ANDROID_ARCH="arm" | |
| ;; | |
| galaxy_nexus) | |
| DEFINES="${DEFINES} skia_arch_type=arm arm_neon=1 arm_version=7 arm_thumb=1" | |
| DEFINES="${DEFINES} skia_resource_cache_mb_limit=32" | |
| ANDROID_ARCH="arm" | |
| ;; | |
| intel_rhb | razr_i | x86) | |
| DEFINES="${DEFINES} skia_arch_type=x86 skia_arch_width=32" | |
| DEFINES="${DEFINES} skia_resource_cache_mb_limit=32" | |
| ANDROID_ARCH="x86" | |
| ;; | |
| arm_v7) | |
| DEFINES="${DEFINES} skia_arch_type=arm arm_neon_optional=1 arm_version=7 arm_thumb=0" | |
| ANDROID_ARCH="arm" | |
| ;; | |
| arm_v7_thumb | nvidia_logan) | |
| DEFINES="${DEFINES} skia_arch_type=arm arm_neon_optional=1 arm_version=7 arm_thumb=1" | |
| ANDROID_ARCH="arm" | |
| ;; | |
| arm) | |
| DEFINES="${DEFINES} skia_arch_type=arm arm_neon=0 arm_thumb=0" | |
| ANDROID_ARCH="arm" | |
| ;; | |
| arm_thumb) | |
| DEFINES="${DEFINES} skia_arch_type=arm arm_neon=0 arm_thumb=1" | |
| ANDROID_ARCH="arm" | |
| ;; | |
| mips) | |
| DEFINES="${DEFINES} skia_arch_type=mips skia_arch_width=32" | |
| DEFINES="${DEFINES} skia_resource_cache_mb_limit=32" | |
| ANDROID_ARCH="mips" | |
| ;; | |
| *) | |
| if [ -z "$ANDROID_IGNORE_UNKNOWN_DEVICE" ]; then | |
| echo "ERROR: unknown device $TARGET_DEVICE" | |
| exit 1 | |
| fi | |
| # If ANDROID_IGNORE_UNKNOWN_DEVICE is set, then ANDROID_TOOLCHAIN | |
| # or ANDROID_ARCH should be set; Otherwise, ANDROID_ARCH | |
| # defaults to 'arm' and the default ARM toolchain is used. | |
| DEFINES="${DEFINES} skia_arch_type=${ANDROID_ARCH-arm}" | |
| # If ANDROID_IGNORE_UNKNOWN_DEVICE is set, extra gyp defines can be | |
| # added via ANDROID_GYP_DEFINES | |
| DEFINES="${DEFINES} ${ANDROID_GYP_DEFINES}" | |
| ;; | |
| esac | |
| verbose "The build is targeting the device: $TARGET_DEVICE" | |
| exportVar DEVICE_ID $TARGET_DEVICE | |
| # setup the appropriate cross compiling toolchains | |
| source $SCRIPT_DIR/utils/setup_toolchain.sh | |
| DEFINES="${DEFINES} android_toolchain=${TOOLCHAIN_TYPE}" | |
| exportVar GYP_DEFINES "$DEFINES $GYP_DEFINES" | |
| SKIA_SRC_DIR=$(cd "${SCRIPT_DIR}/../../.."; pwd) | |
| DEFAULT_SKIA_OUT="${SKIA_SRC_DIR}/out/config/android-${TARGET_DEVICE}" | |
| exportVar SKIA_OUT "${SKIA_OUT:-${DEFAULT_SKIA_OUT}}" | |
| } | |
| # adb_pull_if_needed(android_src, host_dst) | |
| adb_pull_if_needed() { | |
| # get adb location | |
| source $SCRIPT_DIR/utils/setup_adb.sh | |
| # read input params | |
| ANDROID_SRC="$1" | |
| HOST_DST="$2" | |
| if [ -d $HOST_DST ]; | |
| then | |
| HOST_DST="${HOST_DST}/$(basename ${ANDROID_SRC})" | |
| fi | |
| if [ -f $HOST_DST ]; | |
| then | |
| #get the MD5 for dst and src | |
| ANDROID_MD5=`$ADB $DEVICE_SERIAL shell md5 $ANDROID_SRC` | |
| if [ $(uname) == "Darwin" ]; then | |
| HOST_MD5=`md5 -q $HOST_DST` | |
| else | |
| HOST_MD5=`md5sum $HOST_DST` | |
| fi | |
| if [ "${ANDROID_MD5:0:32}" != "${HOST_MD5:0:32}" ]; then | |
| echo -n "$HOST_DST " | |
| $ADB $DEVICE_SERIAL pull $ANDROID_SRC $HOST_DST | |
| fi | |
| else | |
| echo -n "$HOST_DST " | |
| $ADB $DEVICE_SERIAL pull $ANDROID_SRC $HOST_DST | |
| fi | |
| } | |
| # adb_push_if_needed(host_src, android_dst) | |
| adb_push_if_needed() { | |
| # get adb location | |
| source $SCRIPT_DIR/utils/setup_adb.sh | |
| # read input params | |
| HOST_SRC="$1" | |
| ANDROID_DST="$2" | |
| ANDROID_LS=`$ADB $DEVICE_SERIAL shell ls -ld $ANDROID_DST` | |
| if [ "${ANDROID_LS:0:1}" == "d" ]; | |
| then | |
| ANDROID_DST="${ANDROID_DST}/$(basename ${HOST_SRC})" | |
| fi | |
| ANDROID_LS=`$ADB $DEVICE_SERIAL shell ls -ld $ANDROID_DST` | |
| if [ "${ANDROID_LS:0:1}" == "-" ]; then | |
| #get the MD5 for dst and src | |
| ANDROID_MD5=`$ADB $DEVICE_SERIAL shell md5 $ANDROID_DST` | |
| if [ $(uname) == "Darwin" ]; then | |
| HOST_MD5=`md5 -q $HOST_SRC` | |
| else | |
| HOST_MD5=`md5sum $HOST_SRC` | |
| fi | |
| if [ "${ANDROID_MD5:0:32}" != "${HOST_MD5:0:32}" ]; then | |
| echo -n "$ANDROID_DST " | |
| $ADB $DEVICE_SERIAL push $HOST_SRC $ANDROID_DST | |
| fi | |
| else | |
| echo -n "$ANDROID_DST " | |
| $ADB $DEVICE_SERIAL shell mkdir -p "$(dirname "$ANDROID_DST")" | |
| $ADB $DEVICE_SERIAL push $HOST_SRC $ANDROID_DST | |
| fi | |
| } | |
| setup_device "${DEVICE_ID}" |