blob: 37cc3f986307ff70b3efe870daa34d2589b5600a [file] [log] [blame]
/*
* Copyright 2011 Google Inc.
*
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*/
#ifndef GrPathRenderer_DEFINED
#define GrPathRenderer_DEFINED
#include "GrCaps.h"
#include "GrDrawContext.h"
#include "GrPaint.h"
#include "GrResourceProvider.h"
#include "GrShape.h"
#include "SkDrawProcs.h"
#include "SkTArray.h"
class SkPath;
class GrFixedClip;
struct GrPoint;
/**
* Base class for drawing paths into a GrDrawTarget.
*
* Derived classes can use stages GrPaint::kTotalStages through GrPipelineBuilder::kNumStages-1.
* The stages before GrPaint::kTotalStages are reserved for setting up the draw (i.e., textures and
* filter masks).
*/
class SK_API GrPathRenderer : public SkRefCnt {
public:
GrPathRenderer();
/**
* A caller may wish to use a path renderer to draw a path into the stencil buffer. However,
* the path renderer itself may require use of the stencil buffer. Also a path renderer may
* use a GrProcessor coverage stage that sets coverage to zero to eliminate pixels that are
* covered by bounding geometry but outside the path. These exterior pixels would still be
* rendered into the stencil.
*
* A GrPathRenderer can provide three levels of support for stenciling paths:
* 1) kNoRestriction: This is the most general. The caller sets up the GrPipelineBuilder on the target
* and calls drawPath(). The path is rendered exactly as the draw state
* indicates including support for simultaneous color and stenciling with
* arbitrary stenciling rules. Pixels partially covered by AA paths are
* affected by the stencil settings.
* 2) kStencilOnly: The path renderer cannot apply arbitrary stencil rules nor shade and stencil
* simultaneously. The path renderer does support the stencilPath() function
* which performs no color writes and writes a non-zero stencil value to pixels
* covered by the path.
* 3) kNoSupport: This path renderer cannot be used to stencil the path.
*/
enum StencilSupport {
kNoSupport_StencilSupport,
kStencilOnly_StencilSupport,
kNoRestriction_StencilSupport,
};
/**
* This function is to get the stencil support for a particular path. The path's fill must
* not be an inverse type. The path will always be filled and not stroked.
*
* @param shape the shape that will be drawn. Must be simple fill styled and non-inverse
* filled.
*/
StencilSupport getStencilSupport(const GrShape& shape) const {
SkDEBUGCODE(SkPath path;)
SkDEBUGCODE(shape.asPath(&path);)
SkASSERT(shape.style().isSimpleFill());
SkASSERT(!path.isInverseFillType());
return this->onGetStencilSupport(shape);
}
/** Args to canDrawPath()
*
* fShaderCaps The shader caps
* fPipelineBuilder The pipelineBuilder
* fViewMatrix The viewMatrix
* fShape The shape to draw
* fAntiAlias True if anti-aliasing is required.
*/
struct CanDrawPathArgs {
const GrShaderCaps* fShaderCaps;
const SkMatrix* fViewMatrix;
const GrShape* fShape;
bool fAntiAlias;
// These next two are only used by GrStencilAndCoverPathRenderer
bool fHasUserStencilSettings;
bool fIsStencilBufferMSAA;
#ifdef SK_DEBUG
void validate() const {
SkASSERT(fShaderCaps);
SkASSERT(fViewMatrix);
SkASSERT(fShape);
}
#endif
};
/**
* Returns true if this path renderer is able to render the path. Returning false allows the
* caller to fallback to another path renderer This function is called when searching for a path
* renderer capable of rendering a path.
*
* @return true if the path can be drawn by this object, false otherwise.
*/
bool canDrawPath(const CanDrawPathArgs& args) const {
SkDEBUGCODE(args.validate();)
return this->onCanDrawPath(args);
}
/**
* Args to drawPath()
*
* fTarget The target that the path will be rendered to
* fResourceProvider The resource provider for creating gpu resources to render the path
* fPipelineBuilder The pipelineBuilder
* fClip The clip
* fColor Color to render with
* fViewMatrix The viewMatrix
* fShape The shape to draw
* fAntiAlias true if anti-aliasing is required.
* fGammaCorrect true if gamma-correct rendering is to be used.
*/
struct DrawPathArgs {
GrResourceProvider* fResourceProvider;
const GrPaint* fPaint;
const GrUserStencilSettings*fUserStencilSettings;
GrDrawContext* fDrawContext;
const GrClip* fClip;
const SkMatrix* fViewMatrix;
const GrShape* fShape;
bool fAntiAlias;
bool fGammaCorrect;
#ifdef SK_DEBUG
void validate() const {
SkASSERT(fResourceProvider);
SkASSERT(fPaint);
SkASSERT(fUserStencilSettings);
SkASSERT(fDrawContext);
SkASSERT(fClip);
SkASSERT(fViewMatrix);
SkASSERT(fShape);
}
#endif
};
/**
* Draws the path into the draw target. If getStencilSupport() would return kNoRestriction then
* the subclass must respect the stencil settings of the GrPipelineBuilder.
*/
bool drawPath(const DrawPathArgs& args) {
SkDEBUGCODE(args.validate();)
#ifdef SK_DEBUG
CanDrawPathArgs canArgs;
canArgs.fShaderCaps = args.fResourceProvider->caps()->shaderCaps();
canArgs.fViewMatrix = args.fViewMatrix;
canArgs.fShape = args.fShape;
canArgs.fAntiAlias = args.fAntiAlias;
canArgs.fHasUserStencilSettings = !args.fUserStencilSettings->isUnused();
canArgs.fIsStencilBufferMSAA = args.fDrawContext->isStencilBufferMultisampled();
SkASSERT(this->canDrawPath(canArgs));
if (!args.fUserStencilSettings->isUnused()) {
SkPath path;
args.fShape->asPath(&path);
SkASSERT(args.fShape->style().isSimpleFill());
SkASSERT(kNoRestriction_StencilSupport == this->getStencilSupport(*args.fShape));
}
#endif
return this->onDrawPath(args);
}
/* Args to stencilPath().
*
* fResourceProvider The resource provider for creating gpu resources to render the path
* fDrawContext The target of the draws
* fViewMatrix Matrix applied to the path.
* fPath The path to draw.
* fIsAA Is the path to be drawn AA (only set when MSAA is available)
*/
struct StencilPathArgs {
GrResourceProvider* fResourceProvider;
GrDrawContext* fDrawContext;
const GrClip* fClip;
const SkMatrix* fViewMatrix;
bool fIsAA;
const GrShape* fShape;
#ifdef SK_DEBUG
void validate() const {
SkASSERT(fResourceProvider);
SkASSERT(fDrawContext);
SkASSERT(fViewMatrix);
SkASSERT(fShape);
SkASSERT(fShape->style().isSimpleFill());
SkPath path;
fShape->asPath(&path);
SkASSERT(!path.isInverseFillType());
}
#endif
};
/**
* Draws the path to the stencil buffer. Assume the writable stencil bits are already
* initialized to zero. The pixels inside the path will have non-zero stencil values afterwards.
*/
void stencilPath(const StencilPathArgs& args) {
SkDEBUGCODE(args.validate();)
SkASSERT(kNoSupport_StencilSupport != this->getStencilSupport(*args.fShape));
this->onStencilPath(args);
}
// Helper for determining if we can treat a thin stroke as a hairline w/ coverage.
// If we can, we draw lots faster (raster device does this same test).
static bool IsStrokeHairlineOrEquivalent(const GrStyle& style, const SkMatrix& matrix,
SkScalar* outCoverage) {
if (style.pathEffect()) {
return false;
}
const SkStrokeRec& stroke = style.strokeRec();
if (stroke.isHairlineStyle()) {
if (outCoverage) {
*outCoverage = SK_Scalar1;
}
return true;
}
return stroke.getStyle() == SkStrokeRec::kStroke_Style &&
SkDrawTreatAAStrokeAsHairline(stroke.getWidth(), matrix, outCoverage);
}
protected:
// Helper for getting the device bounds of a path. Inverse filled paths will have bounds set
// by devSize. Non-inverse path bounds will not necessarily be clipped to devSize.
static void GetPathDevBounds(const SkPath& path,
int devW,
int devH,
const SkMatrix& matrix,
SkRect* bounds);
private:
/**
* Subclass overrides if it has any limitations of stenciling support.
*/
virtual StencilSupport onGetStencilSupport(const GrShape&) const {
return kNoRestriction_StencilSupport;
}
/**
* Subclass implementation of drawPath()
*/
virtual bool onDrawPath(const DrawPathArgs& args) = 0;
/**
* Subclass implementation of canDrawPath()
*/
virtual bool onCanDrawPath(const CanDrawPathArgs& args) const = 0;
/**
* Subclass implementation of stencilPath(). Subclass must override iff it ever returns
* kStencilOnly in onGetStencilSupport().
*/
virtual void onStencilPath(const StencilPathArgs& args) {
static constexpr GrUserStencilSettings kIncrementStencil(
GrUserStencilSettings::StaticInit<
0xffff,
GrUserStencilTest::kAlways,
0xffff,
GrUserStencilOp::kReplace,
GrUserStencilOp::kReplace,
0xffff>()
);
GrPaint paint;
DrawPathArgs drawArgs;
drawArgs.fResourceProvider = args.fResourceProvider;
drawArgs.fPaint = &paint;
drawArgs.fUserStencilSettings = &kIncrementStencil;
drawArgs.fDrawContext = args.fDrawContext;
drawArgs.fViewMatrix = args.fViewMatrix;
drawArgs.fShape = args.fShape;
drawArgs.fAntiAlias = false; // In this case the MSAA handles the AA so we want to draw BW
drawArgs.fGammaCorrect = false;
this->drawPath(drawArgs);
}
typedef SkRefCnt INHERITED;
};
#endif