| ## -*-makefile-*- |
| #****************************************************************************** |
| # Copyright (C) 1999-2004, International Business Machines |
| # Corporation and others. All Rights Reserved. |
| #****************************************************************************** |
| # This Makefile.inc is designed to be included into projects which make use |
| # of the ICU. |
| |
| # CONTENTS OF THIS FILE |
| # 1). Base configuration information and linkage |
| # 2). Variables giving access to ICU tools |
| # 3). Host information |
| # 4). Compiler flags and settings |
| # 5). Data Packaging directives |
| # 6). Include of platform make fragment (mh-* file) |
| |
| ################################################################## |
| ################################################################## |
| # |
| # *1* base configuration information and linkage |
| # |
| ################################################################## |
| # The PREFIX is the base of where ICU is installed. |
| # Inside this directory you should find bin, lib, include/unicode, |
| # etc. If ICU is not installed in this directory, you must change the |
| # following line. There should exist $(prefix)/include/unicode/utypes.h |
| # for example. |
| prefix = @prefix@ |
| exec_prefix = @exec_prefix@ |
| libdir = @libdir@ |
| libexecdir = @libexecdir@ |
| bindir = @bindir@ |
| datadir = @datadir@ |
| sbindir = @sbindir@ |
| |
| # about the ICU version |
| VERSION = @VERSION@ |
| UNICODE_VERSION = @UNICODE_VERSION@ |
| |
| # The prefix for ICU libraries, normally 'icu' |
| ICUPREFIX = icu |
| PACKAGE = @PACKAGE@ |
| LIBICU = lib$(ICUPREFIX) |
| |
| # Static library prefix and file extension |
| STATIC_PREFIX = s |
| LIBSICU = lib$(STATIC_PREFIX)$(ICUPREFIX) |
| A = a |
| |
| # Suffix at the end of libraries. Usually empty. |
| ICULIBSUFFIX = @ICULIBSUFFIX@ |
| # ICULIBSUFFIX_VERSION is non-empty if it is to contain a library |
| # version. For example, if it is 21, it means libraries are named |
| # libicuuc21.so for example. |
| |
| # rpath links a library search path right into the binaries. |
| ## mh-files MUST NOT override RPATHLDFLAGS unless they provide |
| ## equivalent '#SH#' lines for icu-config fixup |
| ENABLE_RPATH = @ENABLE_RPATH@ |
| ifeq ($(ENABLE_RPATH),YES) |
| RPATHLDFLAGS = $(LD_RPATH)$(LD_RPATH_PRE)$(libdir) |
| endif |
| |
| #SH## icu-config version of above 'if': |
| #SH#case "$ENABLE_RPATH" in |
| #SH# [yY]*) |
| #SH# ENABLE_RPATH=YES |
| #SH# RPATHLDFLAGS="${LD_RPATH}${LD_RPATH_PRE}${libdir}" |
| #SH# ;; |
| #SH# |
| #SH# [nN]*) |
| #SH# ENABLE_RPATH=NO |
| #SH# RPATHLDFLAGS="" |
| #SH# ;; |
| #SH# |
| #SH# *) |
| #SH# echo $0: Unknown --enable-rpath value ${ENABLE_RPATH} 1>&2 |
| #SH# exit 3 |
| #SH# ;; |
| #SH#esac |
| |
| |
| ### To link your application with ICU: |
| # 1. use LDFLAGS, CFLAGS, etc from above |
| # 2. link with $(ICULIBS) |
| # 3. optionally, add one or more of: |
| # - $(ICULIBS_I18N) - i18n library, formatting, etc. |
| # - $(ICULIBS_LAYOUT) - ICU layout library. |
| # - $(ICULIBS_ICUIO) - ICU stdio equivalent library |
| |
| ICULIBS_COMMON = -l$(ICUPREFIX)uc$(ICULIBSUFFIX)$(ICULIBSUFFIX_VERSION) |
| ICULIBS_DATA = -l$(ICUPREFIX)data$(ICULIBSUFFIX)$(ICULIBSUFFIX_VERSION) |
| ICULIBS_I18N = -l$(ICUPREFIX)i18n$(ICULIBSUFFIX)$(ICULIBSUFFIX_VERSION) |
| ICULIBS_TOOLUTIL = -l$(ICUPREFIX)tu$(ICULIBSUFFIX)$(ICULIBSUFFIX_VERSION) |
| ICULIBS_CTESTFW = -l$(ICUPREFIX)ctestfw$(ICULIBSUFFIX)$(ICULIBSUFFIX_VERSION) |
| ICULIBS_ICUIO = -l$(ICUPREFIX)io$(ICULIBSUFFIX)$(ICULIBSUFFIX_VERSION) |
| ICULIBS_OBSOLETE = -l$(ICUPREFIX)obsolete$(ICULIBSUFFIX)$(ICULIBSUFFIX_VERSION) |
| ICULIBS_LAYOUT = -l$(ICUPREFIX)le$(ICULIBSUFFIX)$(ICULIBSUFFIX_VERSION) |
| ICULIBS_LAYOUTEX = -l$(ICUPREFIX)lx$(ICULIBSUFFIX)$(ICULIBSUFFIX_VERSION) |
| ICULIBS_BASE = $(LIBS) -L$(libdir) |
| |
| # for icu-config to test with |
| ICULIBS_COMMON_LIB_NAME = ${LIBICU}uc${ICULIBSUFFIX}${ICULIBSUFFIX_VERSION}.${SO} |
| |
| # ICULIBS is the set of libraries your application should link |
| # with usually. Many applications will want to add $(ICULIBS_I18N) as well. |
| ICULIBS = $(ICULIBS_BASE) $(ICULIBS_I18N) $(ICULIBS_COMMON) $(ICULIBS_DATA) |
| |
| ################################################################## |
| ################################################################## |
| # |
| # *2* access to ICU tools |
| # |
| ################################################################## |
| # Environment variable to set a runtime search path |
| # (Overridden when necessary in -mh files) |
| LDLIBRARYPATH_ENVVAR = LD_LIBRARY_PATH |
| |
| # Versioned target for a shared library |
| FINAL_SO_TARGET = $(SO_TARGET).$(SO_TARGET_VERSION) |
| MIDDLE_SO_TARGET = $(SO_TARGET).$(SO_TARGET_VERSION_MAJOR) |
| |
| # Access to important ICU tools. |
| # Use as follows: $(INVOKE) $(GENRB) arguments .. |
| INVOKE = $(LDLIBRARYPATH_ENVVAR)=$(libdir):$$$(LDLIBRARYPATH_ENVVAR) $(LEAK_CHECKER) |
| GENCCODE = $(sbindir)/genccode |
| GENCMN = $(sbindir)/gencmn |
| GENRB = $(bindir)/genrb |
| PKGDATA = $(bindir)/pkgdata |
| |
| ################################################################## |
| ################################################################## |
| # |
| # *3* Information about the host |
| # |
| ################################################################## |
| |
| # Information about the host that 'configure' was run on. |
| host = @host@ |
| host_alias = @host_alias@ |
| host_cpu = @host_cpu@ |
| host_vendor = @host_vendor@ |
| host_os = @host_os@ |
| # Our platform canonical name (as determined by configure) |
| # this is a #define value (i.e. U_XXXX or XXXX) |
| platform = @platform@ |
| |
| ################################################################## |
| ################################################################## |
| # |
| # *4* compiler flags and misc. options |
| # |
| ################################################################## |
| AIX_SHLIB = @AIX_SHLIB@ |
| AR = @AR@ |
| CC = @CC@ |
| CFLAGS = @CFLAGS@ |
| CPP = @CPP@ |
| CPPFLAGS = @CPPFLAGS@ $(LIBCPPFLAGS) -I$(prefix)/include |
| CXX = @CXX@ |
| CXXFLAGS = @CXXFLAGS@ |
| DEFAULT_MODE = @DATA_PACKAGING_MODE@ |
| DEFS = @DEFS@ |
| FFLAGS = @FFLAGS@ |
| INSTALL = @INSTALL@ |
| INSTALL_DATA = @INSTALL_DATA@ |
| INSTALL_DATA = @INSTALL_DATA@ |
| INSTALL_PROGRAM = @INSTALL_PROGRAM@ |
| INSTALL_PROGRAM = @INSTALL_PROGRAM@ |
| INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
| LDFLAGS = @LDFLAGS@ $(RPATHLDFLAGS) |
| LIBS = @LIBS@ |
| LIB_M = @LIB_M@ |
| LIB_VERSION = @LIB_VERSION@ |
| LIB_VERSION_MAJOR = @LIB_VERSION_MAJOR@ |
| MKINSTALLDIRS = $(SHELL) $(pkgdatadir)/mkinstalldirs |
| RANLIB = @RANLIB@ |
| RMV = rm -rf |
| SHELL = @SHELL@ |
| SHLIB.c= $(CC) $(DEFS) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) -shared |
| SHLIB.cc= $(CXX) $(DEFS) $(CPPFLAGS) $(CXXFLAGS) $(LDFLAGS) -shared |
| U_IS_BIG_ENDIAN = @U_IS_BIG_ENDIAN@ |
| includedir = @includedir@ |
| infodir = @infodir@ |
| ld_rpath_suf = @ld_rpath_suf@ |
| localstatedir = @localstatedir@ |
| mandir = @mandir@ |
| oldincludedir = @oldincludedir@ |
| program_transform_name = @program_transform_name@ |
| sharedstatedir = @sharedstatedir@ |
| sysconfdir = @sysconfdir@ |
| INSTALL-L = ${INSTALL_DATA} |
| |
| |
| ################################################################## |
| ################################################################## |
| # |
| # *5* packaging options and directories |
| # |
| ################################################################## |
| |
| pkgdatadir = $(datadir)/$(PACKAGE)$(ICULIBSUFFIX)/$(VERSION) |
| pkglibdir = $(libdir)/$(PACKAGE)$(ICULIBSUFFIX)/$(VERSION) |
| |
| # The basename of the ICU data file (i.e. icudt21b ) |
| ICUDATA_NAME = icudt@LIB_VERSION_MAJOR@@ICUDATA_CHAR@ |
| |
| # Defaults for pkgdata's mode and directories |
| # The default data dir changes depending on what packaging mode |
| # is being used |
| ifeq ($(strip $(PKGDATA_MODE)),) |
| #SH# if [ "x$PKGDATA_MODE" = "x" ]; |
| #SH# then |
| PKGDATA_MODE=@DATA_PACKAGING_MODE@ |
| #SH# fi |
| endif |
| |
| #SH# case "$PKGDATA_MODE" in |
| ifeq ($(PKGDATA_MODE),common) |
| #SH# common) |
| ICUDATA_DIR = $(pkgdatadir) |
| ICUPKGDATA_DIR = $(ICUDATA_DIR) |
| #SH# ;; |
| else |
| ifeq ($(PKGDATA_MODE),dll) |
| #SH# dll) |
| ICUDATA_DIR = $(pkgdatadir) |
| ICUPKGDATA_DIR = $(libdir) |
| #SH# ;; |
| else |
| #SH# *) |
| ICUDATA_DIR = $(pkgdatadir) |
| ICUPKGDATA_DIR = $(ICUDATA_DIR) |
| #SH# ;; |
| endif |
| endif |
| |
| #SH# esac |
| |
| GENCCODE_ASSEMBLY = @GENCCODE_ASSEMBLY@ |
| |
| ################################################################## |
| ################################################################## |
| # |
| # *6* Inclusion of platform make fragment (mh-* file) |
| # |
| ################################################################## |
| # The mh- file ("make fragment") for the platform is included here. |
| # It may override the above settings. |
| # It is put last so that the mh-file can override anything. |
| |
| include $(pkgdatadir)/config/@platform_make_fragment_name@ |
| |
