| # Copyright (C) 2016 and later: Unicode, Inc. and others. |
| # License & terms of use: http://www.unicode.org/copyright.html |
| # Copyright (C) 2010-2014, International Business Machines Corporation and others. |
| # All Rights Reserved. |
| # |
| # Commands for regenerating ICU4C locale data (.txt files) from CLDR. |
| # |
| # The process requires local copies of |
| # - CLDR (the source of most of the data, and some Java tools) |
| # - ICU4J (used only for checking the converted data) |
| # - ICU4C (the destination for the new data, and the source for some of it) |
| # |
| # For an official CLDR data integration into ICU, these should be clean, freshly |
| # checked-out. For released CLDR sources, an alternative to checking out sources |
| # for a given version is downloading the zipped sources for the common (core.zip) |
| # and tools (tools.zip) directory subtrees from the Data column in |
| # [http://cldr.unicode.org/index/downloads]. |
| # |
| # The versions of each of these must match. Included with the release notes for |
| # ICU is the version number and/or a CLDR svn tag name for the revision of CLDR |
| # that was the source of the data for that release of ICU. |
| # |
| # Besides a standard JDK, the process also requires ant |
| # (http://ant.apache.org/), |
| # plus the xml-apis.jar from the Apache xalan package |
| # (http://xml.apache.org/xalan-j/downloads.html). |
| # |
| # Note: Enough things can (and will) fail in this process that it is best to |
| # run the commands separately from an interactive shell. They should all |
| # copy and paste without problems. |
| # |
| # It is often useful to save logs of the output of many of the steps in this |
| # process. The commands below put log files in /tmp; you may want to put them |
| # somewhere else. |
| # |
| #---- |
| # |
| # There are several environment variables that need to be defined. |
| # |
| # a) Java- and ant-related variables |
| # |
| # JAVA_HOME: Path to JDK (a directory, containing e.g. bin/java, bin/javac, |
| # etc.); on many systems this can be set using |
| # `/usr/libexec/java_home`. |
| # |
| # ANT_OPTS: You may want to set: |
| # |
| # -Xmx4096m, to give Java more memory; otherwise it may run out |
| # of heap. |
| # |
| # b) CLDR-related variables |
| # |
| # CLDR_DIR: Path to root of CLDR sources, below which are the common and |
| # tools directories. |
| # CLDR_CLASSES: Path to the CLDR Tools classes directory. If not set, defaults |
| # to $CLDR_DIR/tools/java/classes |
| # |
| # CLDR_TMP_DIR: Parent of temporary CLDR production data. |
| # Defaults to $CLDR_DIR/../cldr-aux (sibling to CLDR_DIR). |
| # |
| # *** NOTE ***: In CLDR release-36-beta, the GenerateProductionData |
| # tool no longer generates data into $CLDR_TMP_DIR/production; instead |
| # it generates data into $CLDR_DIR/../cldr-staging/production. However |
| # the rest of the build still assumes that the generated data is in |
| # $CLDR_TMP_DIR/production. So CLDR_TMP_DIR must be defined to be |
| # $CLDR_DIR/../cldr-staging |
| # |
| # c) ICU-related variables |
| # These variables only need to be set if you're directly reusing the |
| # commands below. |
| # |
| # ICU4C_DIR: Path to root of ICU4C sources, below which is the source dir. |
| # |
| # ICU4J_ROOT: Path to root of ICU4J sources, below which is the main dir. |
| # |
| #---- |
| # |
| # If you are adding or removing locales, or specific kinds of locale data, |
| # there are some xml files in the ICU sources that need to be updated (these xml |
| # files are used in addition to the CLDR files as inputs to the CLDR data build |
| # process for ICU): |
| # |
| # icu4c/source/data/icu-config.xml - Update <locales> to add or remove |
| # CLDR locales for inclusion in ICU. Update <paths> to prefer |
| # alt forms for certain paths, or to exclude certain paths; note |
| # that <paths> items can only have draft or alt attributes. |
| # |
| # Note that if a language-only locale (e.g. "de") is included in |
| # <locales>, then all region sublocales for that language that |
| # are present in CLDR data (e.g. "de_AT", "de_BE", "de_CH", etc.) |
| # should also be included in <locales>, per PMC policy decision |
| # 2012-05-02 (see http://bugs.icu-project.org/trac/ticket/9298). |
| # |
| # icu4c/source/data/build.xml - If you are adding or removing break |
| # iterators, you need to update <fileset id="brkitr" ...> under |
| # <target name="clean" ...> to clean the correct set of files. |
| # |
| # If there are new CLDR resource bundle types, you may need to |
| # updated the <remapper> sections to put these in the correct |
| # data subfolder for ICU. |
| # |
| # icu4c/source/data/xml/ - If you are adding a new locale, break |
| # iterator, collation tailoring, or rule-based number formatter, |
| # you may need to add a corresponding xml file in (respectively) |
| # the main/, brkitr/, collation/, or rbnf/ subdirectory here. |
| # |
| #---- |
| # |
| # For an official CLDR data integration into ICU, there are some additional |
| # considerations: |
| # |
| # a) Don't commit anything in ICU sources (and possibly any changes in CLDR |
| # sources, depending on their nature) until you have finished testing and |
| # resolving build issues and test failures for both ICU4C and ICU4J. |
| # |
| # b) There are version numbers that may need manual updating in CLDR (other |
| # version numbers get updated automatically, based on these): |
| # |
| # common/dtd/ldml.dtd - update cldrVersion |
| # common/dtd/ldmlBCP47.dtd - update cldrVersion |
| # common/dtd/ldmlSupplemental.dtd - update cldrVersion |
| # common/dtd/ldmlSupplemental.dtd - updateunicodeVersion |
| # keyboards/dtd/ldmlKeyboard.dtd - update cldrVersion |
| # tools/java/org/unicode/cldr/util/CLDRFile.java - update GEN_VERSION |
| # |
| # c) After everything is committed, you will need to tag the CLDR, ICU4J, and |
| # ICU4C sources that ended up being used for the integration; see step 17 |
| # below. |
| # |
| ################################################################################ |
| |
| # 1a. Java and ant variables, adjust for your system |
| |
| export JAVA_HOME=`/usr/libexec/java_home` |
| export ANT_OPTS="-Xmx4096m |
| |
| # 1b. CLDR variables, adjust for your setup; with cygwin it might be e.g. |
| # CLDR_DIR=`cygpath -wp /build/cldr` |
| |
| export CLDR_DIR=$HOME/cldr-myfork |
| |
| # 1c. ICU variables |
| |
| export ICU4C_DIR=$HOME/icu-myfork/icu4c |
| export ICU4J_ROOT=$HOME/icu-myfork/icu4j |
| |
| # 2. Build the CLDR Java tools and jar |
| |
| cd $CLDR_DIR/tools/java |
| ant all |
| ant jar |
| |
| # 3. Configure ICU4C, build and test without new data first, to verify that |
| # there are no pre-existing errors. Here <platform> is the runConfigureICU |
| # code for the platform you are building, e.g. Linux, MacOSX, Cygwin. |
| |
| cd $ICU4C_DIR/source |
| ./runConfigureICU <platform> |
| make all 2>&1 | tee /tmp/icu4c-oldData-makeAll.txt |
| make check 2>&1 | tee /tmp/icu4c-oldData-makeCheck.txt |
| |
| # 4. Build the new ICU4C data files; these include .txt files and .py files. |
| # These new files will replace whatever was already present in the ICU4C sources. |
| # This process uses ant with ICU's data/build.xml and data/icu-config.xml to |
| # operate (via CLDR's ant/CLDRConverterTool.java and ant/CLDRBuild.java) the |
| # necessary CLDR tools including LDML2ICUConverter, ConvertTransforms, etc. |
| # This process will take several minutes. |
| # Keep a log so you can investigate anything that looks suspicious. |
| # |
| # Running "ant setup" is not required, but it will print useful errors to |
| # debug issues with your path when it fails. |
| # |
| |
| cd $ICU4C_DIR/source/data |
| ant setup |
| ant clean |
| ant all 2>&1 | tee /tmp/cldr-newData-buildLog.txt |
| |
| # NOTE: if you change the CLDR data, please run "ant cleanprod" to clean out the |
| # temporary production data directory (usually $CLDR_DIR/../cldr-aux/production ) |
| |
| # 5. Check which data files have modifications, which have been added or removed |
| # (if there are no changes, you may not need to proceed further). Make sure the |
| # list seems reasonable. |
| |
| git status |
| |
| # 6. Fix any errors, investigate any warnings. Currently for example there are |
| # a few warnings of the following form in rbnf files: |
| # [cldr-build] Warning: no version match with: $Revisionā¹$ |
| # |
| # Fixing may entail modifying CLDR source data or tools - for example, |
| # updating the validSubLocales for collation data (file a bug if appropriate). |
| # Repeat steps 4-5 until there are no build errors and no unexpected |
| # warnings. |
| |
| # 7. Now rebuild ICU4C with the new data and run make check tests. |
| # Again, keep a log so you can investigate the errors. |
| cd $ICU4C_DIR/source |
| |
| # 7a. If any files were added or removed (likely), re-run configure: |
| ./runConfigureICU <platform> |
| make clean |
| |
| # 7b. Now do the rebuild. |
| make check 2>&1 | tee /tmp/icu4c-newData-makeCheck.txt |
| |
| # 8. Investigate each test case failure. The first run processing new CLDR data |
| # from the Survey Tool can result in thousands of failures (in many cases, one |
| # CLDR data fix can resolve hundreds of test failures). If the error is caused |
| # by bad CLDR data, then file a CLDR bug, fix the data, and regenerate from |
| # step 4. If the data is OK but the testcase needs to be updated because the |
| # data has legitimately changed, then update the testcase. You will check in |
| # the updated testcases along with the new ICU data at the end of this process. |
| # Note that if the new data has any differences in structure, you will have to |
| # update test/testdata/structLocale.txt or /tsutil/cldrtest/TestLocaleStructure |
| # may fail. |
| # Repeat steps 4-7 until there are no errors. |
| |
| # 9. Now run the make check tests in exhaustive mode: |
| |
| cd $ICU4C_DIR/source |
| export INTLTEST_OPTS="-e" |
| export CINTLTST_OPTS="-e" |
| make check 2>&1 | tee /tmp/icu4c-newData-makeCheckEx.txt |
| |
| # 10. Again, investigate each failure, fixing CLDR data or ICU test cases as |
| # appropriate, and repeating steps 4-7 and 9 until there are no errors. |
| |
| # 11. Now with ICU4J, build and test without new data first, to verify that |
| # there are no pre-existing errors (or at least to have the pre-existing errors |
| # as a base for comparison): |
| |
| cd $ICU4J_ROOT |
| ant all 2>&1 | tee /tmp/icu4j-oldData-antAll.txt |
| ant check 2>&1 | tee /tmp/icu4j-oldData-antCheck.txt |
| |
| # 12. Transfer the data to ICU4J: |
| cd $ICU4C_DIR/source |
| |
| # 12a. You need to reconfigure ICU4C to include the unicore data. |
| ICU_DATA_BUILDTOOL_OPTS=--include_uni_core_data ./runConfigureICU <platform> |
| |
| # 12b. Now build the jar files. |
| cd $ICU4C_DIR/source/data |
| # The following 2 lines are required to include the unicore data: |
| make clean |
| make -j6 |
| make icu4j-data-install |
| cd $ICU4C_DIR/source/test/testdata |
| make icu4j-data-install |
| |
| # 13. Now rebuild ICU4J with the new data and run tests: |
| # Keep a log so you can investigate the errors. |
| |
| cd $ICU4J_ROOT |
| ant check 2>&1 | tee /tmp/icu4j-newData-antCheck.txt |
| |
| # 14. Investigate test case failures; fix test cases and repeat from step 12, |
| # or fix CLDR data and repeat from step 4, as appropriate, until there are no |
| # more failures in ICU4C or ICU4J (except failures that were present before you |
| # began testing the new CLDR data). |
| |
| # Note that certain data changes and related test failures may require the |
| # rebuilding of other kinds of data. For example: |
| # a) Changes to locale matching data may cause failures in e.g. the following: |
| # com.ibm.icu.dev.test.util.LocaleDistanceTest (testLoadedDataSameAsBuiltFromScratch) |
| # com.ibm.icu.dev.test.util.LocaleMatcherTest (testLikelySubtagsLoadedDataSameAsBuiltFromScratch) |
| # To address these requires building and running the tool |
| # icu4j/tools/misc/src/com/ibm/icu/dev/tool/locale/LocaleDistanceBuilder.java |
| # to regenerate the file icu4c/source/data/misc/langInfo.txt and then regenerating |
| # the ICU4J data jars. |
| # b) Changes to plurals data may cause failures in e.g. the following |
| # com.ibm.icu.dev.test.format.PluralRulesTest (TestLocales) |
| # To address these requires updating the LOCALE_SNAPSHOT data in |
| # icu4j/main/tests/core/src/com/ibm/icu/dev/test/format/PluralRulesTest.java |
| # by modifying the TestLocales() test there to run generateLOCALE_SNAPSHOT() and then |
| # copying in the updated data. |
| |
| # 15. Check the file changes; then git add or git rm as necessary, and |
| # commit the changes. |
| |
| cd $HOME/icu/ |
| cd .. |
| git status |
| # add or remove as necessary |
| # commit |
| |
| # 16. For an official CLDR data integration into ICU, now tag the CLDR and |
| # ICU sources with an appropriate CLDR milestone (you can check previous |
| # tags for format), e.g.: |
| |
| svn copy svn+ssh://unicode.org/repos/cldr/trunk \ |
| svn+ssh://unicode.org/repos/cldr/tags/release-NNN \ |
| --parents -m "cldrbug nnnn: tag cldr sources for NNN" |
| |
| cd $HOME/icu/ |
| git tag ... |
| |
| |