skia / external / github.com / KhronosGroup / OpenGL-Registry / eae1d6dde1e283f6fdf803274a2484007e592599 / . / extensions / NV / NV_evaluators.txt

Name | |

NV_evaluators | |

Name Strings | |

GL_NV_evaluators | |

Contact | |

Matt Craighead, NVIDIA Corporation (mcraighead 'at' nvidia.com) | |

Mark J. Kilgard, NVIDIA Corporation (mjk 'at' nvidia.com) | |

Notice | |

Copyright NVIDIA Corporation, 2000, 2001. | |

IP Status | |

NVIDIA Proprietary. | |

Status | |

Discontinued. | |

NVIDIA no longer supports this extension in driver updates after | |

November 2002. Instead, use conventional OpenGL evaluators or | |

tessellate surfaces within your application. | |

Version | |

NVIDIA Date: January 3, 2003 | |

$Date$ $Revision$ | |

$Id: //sw/main/docs/OpenGL/specs/old/GL_NV_evaluators.txt#2 $ | |

Number | |

225 | |

Dependencies | |

Written based on the wording of the OpenGL 1.2.1 specification. | |

Assumes support for the ARB_multitexture extension. | |

NV_vertex_program affects the definition of this extension. | |

Overview | |

OpenGL evaluators provide applications with the capability to | |

specify polynomial or rational curves and surfaces using control | |

points relative to the Bezier basis. The curves and surfaces are | |

then drawn by evaluating the polynomials provided at various values | |

for the u parameter of a curve or the (u,v) parameters of a surface. | |

A tensor product formulation is used for the surfaces. | |

For various historical reasons, evaluators have not been | |

particularly popular as an interface for drawing curves and surfaces. | |

This extension proposes a new interface for surfaces that provides a | |

number of significant enhancements to the functionality provided by | |

the original OpenGL evaluators. | |

Many implementations never optimized evaluators, so applications | |

often implemented their own algorithms instead. This extension | |

relaxes some restrictions that make it difficult to optimize | |

evaluators. | |

Also, new vertex attributes have been added to OpenGL through | |

extensions, including multiple sets of texture coordinates, a | |

secondary color, a fog coordinate, a vertex weight, and others. | |

The extensions which added these vertex attributes never bothered | |

to update the functionality of evaluators, since they were used so | |

little in the first place. In turn, evaluators have become more and | |

more out of date, making it even less likely that developers will | |

want to use them. Most of the attributes are not a big loss, but | |

support for multiple sets of texture coordinates would be absolutely | |

essential to developers considering the use of evaluators. | |

OpenGL evaluators only support rectangular patches, not triangular | |

patches. Although triangular patches can be converted into | |

rectangular patches, direct support for triangular patches is likely | |

to be more efficient. | |

The tessellation algorithm used is too inflexible for most purposes; | |

only the number of rows and columns can be specified. Adjacent | |

patches must then have identical numbers of rows and columns, or | |

severe cracking will occur. Ideally, a number of subdivisions could | |

be specified for all four sides of a rectangular patch and for all | |

three of a triangular patch. This extension goes one step further | |

and allows those numbers to be specified in floating-point, providing | |

a mechanism for smoothly changing the level of detail of the surface. | |

Meshes evaluated with EvalMesh are required to match up exactly | |

with equivalent meshes evaluated with EvalCoord or EvalPoint. | |

This makes it difficult or impossible to use optimizations such as | |

forward differencing. | |

Finally, little attention is given to some of the difficult problems | |

that can arise when multiple patches are drawn. Depending on the | |

way evaluators are implemented, and depending on the orientation of | |

edges, numerical accuracy problems can cause cracks to appear between | |

patches with the same boundary control points. This extension makes | |

guarantees that an edge shared between two patches will match up | |

exactly under certain conditions. | |

Issues | |

* Should one-dimensional evaluators be supported? | |

RESOLVED: No. This extension is intended for surfaces only. | |

* Should we support triangular patches? | |

RESOLVED: Yes. Otherwise, applications will have to convert | |

them to rectangular patches themselves. We can do this more | |

efficiently. | |

* What domain should triangular patches be defined on? | |

RESOLVED: (0,0),(1,0),(0,1). | |

* What memory layout should we use for triangular patch control | |

points? | |

RESOLVED: Both a[i][j], where i+j <= n, and a packed format are | |

supported. | |

* Is it worth it to have "evaluator objects"? | |

RESOLVED: No. We will leave these out for now. | |

* Should we support the original evaluators' ability to specify | |

a map from an arbitrary (u1,v1) to an arbitrary (u2,v2)? | |

RESOLVED: No. Maps will always extend from (0,0) to (1,1) | |

and will always be evaluated from (0,0) to (1,1). | |

* Should the new interface support an EvalCoord-like syntax? | |

RESOLVED: No. We are only interested in evaluating an entire | |

mesh at once. | |

* Should we support the "mode" parameter to the existing EvalMesh2, | |

which allows the mesh to be tessellated in wireframe or as points? | |

RESOLVED: No. We will leave in the parameter and require that | |

it be FILL, though, to leave room for a future extension. | |

* Should there be a new interface to specify control points or should | |

Map2{fd} be reused? | |

RESOLVED: A new interface. There are enough changes compared to | |

the original evaluators that we can't reuse the old interface | |

without causing more problems. For example, the target | |

parameter of Map2{fd} is really a cross of target and index | |

in MapControlPointsNV, and so it ends up creating an excessive | |

number of enumerants. | |

* How should grids be specified? | |

RESOLVED: A MapParameter command. This is better than a new | |

MapGrid- style command because it can be extended to include | |

new parameter types. | |

* Should there be any rules about the order of generation of | |

primitives within a single patch? | |

RESOLVED: No. The tessellation algorithm itself is not even | |

specified, so it makes no sense to do this. Applications must | |

not depend on the order in which the primitives are drawn. | |

* Should the stride for MapControlPointsNV be specified in basic | |

machine units (i.e. unsigned bytes) or in floats/doubles? | |

RESOLVED: ubytes. Most of the rest of OpenGL (vertex arrays, | |

pixel path, etc.) uses ubytes; evaluators are actually | |

inconsistent. | |

* How much leeway should implementations be given to choose their own | |

algorithm for tessellation? | |

RESOLVED: The integral tessellation scheme will require a | |

specific tessellation of the boundary edges of the patch, but the | |

interior tessellation is implementation-specific. The fractional | |

tessellation scheme will only require a minimum number of segments | |

along each edge. In either case, a minimum number of triangles | |

for the entire patch is specified. | |

* Should there be rules to ensure that the triangles will be | |

oriented in a consistent fashion? | |

RESOLVED: Yes. This is essential for features such as backface | |

culling to work properly. The rule given ensures that the | |

orientation will be identical to the orientation used for the | |

original evaluators. | |

* Should there be a separate MAX_EVAL_ORDER for rational surfaces? | |

RESOLVED: Yes. Rational surfaces require additional calculation to | |

be done by the implementation, especially if AUTO_NORMAL is | |

enabled. Furthermore, the most useful rational surfaces are of low | |

order. For example, all the conic sections are quadratic rational | |

surfaces. | |

* Should there be enables similar to AUTO_NORMAL that generate | |

partials of U (tangents), partials of V, and/or binormals? | |

RESOLVED: No. The application is responsible for configuring | |

the evaluators appropriately. | |

The auto normal functionality is supported because it is fairly | |

complicated and was already a core part of OpenGL for evaluators. | |

Plus there is already a "normal" vertex attribute for it to | |

automatically generate. | |

The partials of U and partials of V are fairly straightforward | |

to evaluate (just take the derivative of the bivariate polynomial | |

in terms of either U or V) plus there is not a particular vertex | |

attribute associated with each of these. | |

New Procedures and Functions | |

void MapControlPointsNV(enum target, uint index, enum type, | |

sizei ustride, sizei vstride, | |

int uorder, int vorder, | |

boolean packed, | |

const void *points) | |

void MapParameterivNV(enum target, enum pname, const int *params) | |

void MapParameterfvNV(enum target, enum pname, const float *params) | |

void GetMapControlPointsNV(enum target, uint index, enum type, | |

sizei ustride, sizei vstride, | |

boolean packed, void *points) | |

void GetMapParameterivNV(enum target, enum pname, int *params) | |

void GetMapParameterfvNV(enum target, enum pname, float *params) | |

void GetMapAttribParameterivNV(enum target, uint index, enum pname, | |

int *params) | |

void GetMapAttribParameterfvNV(enum target, uint index, enum pname, | |

float *params) | |

void EvalMapsNV(enum target, enum mode) | |

New Tokens | |

Accepted by the <target> parameter of MapControlPointsNV, | |

MapParameter[if]vNV, GetMapControlPointsNV, GetMapParameter[if]vNV, | |

GetMapAttribParameter[if]vNV, and EvalMapsNV: | |

EVAL_2D_NV 0x86C0 | |

EVAL_TRIANGULAR_2D_NV 0x86C1 | |

Accepted by the <pname> parameter of MapParameter[if]vNV and | |

GetMapParameter[if]vNV: | |

MAP_TESSELLATION_NV 0x86C2 | |

Accepted by the <pname> parameter of GetMapAttribParameter[if]vNV: | |

MAP_ATTRIB_U_ORDER_NV 0x86C3 | |

MAP_ATTRIB_V_ORDER_NV 0x86C4 | |

Accepted by the <cap> parameter of Disable, Enable, and IsEnabled, | |

and by the <pname> parameter of GetBooleanv, GetIntegerv, GetFloatv, | |

and GetDoublev: | |

EVAL_FRACTIONAL_TESSELLATION_NV 0x86C5 | |

EVAL_VERTEX_ATTRIB0_NV 0x86C6 | |

EVAL_VERTEX_ATTRIB1_NV 0x86C7 | |

EVAL_VERTEX_ATTRIB2_NV 0x86C8 | |

EVAL_VERTEX_ATTRIB3_NV 0x86C9 | |

EVAL_VERTEX_ATTRIB4_NV 0x86CA | |

EVAL_VERTEX_ATTRIB5_NV 0x86CB | |

EVAL_VERTEX_ATTRIB6_NV 0x86CC | |

EVAL_VERTEX_ATTRIB7_NV 0x86CD | |

EVAL_VERTEX_ATTRIB8_NV 0x86CE | |

EVAL_VERTEX_ATTRIB9_NV 0x86CF | |

EVAL_VERTEX_ATTRIB10_NV 0x86D0 | |

EVAL_VERTEX_ATTRIB11_NV 0x86D1 | |

EVAL_VERTEX_ATTRIB12_NV 0x86D2 | |

EVAL_VERTEX_ATTRIB13_NV 0x86D3 | |

EVAL_VERTEX_ATTRIB14_NV 0x86D4 | |

EVAL_VERTEX_ATTRIB15_NV 0x86D5 | |

Accepted by the <pname> parameter of GetBooleanv, GetIntegerv, | |

GetFloatv, and GetDoublev: | |

MAX_MAP_TESSELLATION_NV 0x86D6 | |

MAX_RATIONAL_EVAL_ORDER_NV 0x86D7 | |

Additions to Chapter 2 of the 1.2 Specification (OpenGL Operation) | |

None. | |

Additions to Chapter 3 of the 1.2 Specification (Rasterization) | |

None. | |

Additions to Chapter 4 of the 1.2 Specification (Per-Fragment Operations | |

and the Frame Buffer) | |

None. | |

Additions to Chapter 5 of the 1.2 Specification (Special Functions) | |

-- NEW Section 5.7 "General Evaluators" | |

"General evaluators are similar to evaluators in that they can | |

be used to evaluate polynomial and rational mappings, but general | |

evaluators have several new features that the original evaluators | |

do not. First, they support triangular surfaces in addition to | |

(quadrilateral) tensor product surfaces. Second, the tessellation | |

can be varied continuously as well as in integral steps. Finally, | |

general evaluators can evaluate all vertex attributes, not just the | |

vertex, color, normal, and texture coordinates. | |

Several elements of the original evaluators have been removed in | |

the general evaluators interface. The general evaluators always | |

evaluate four components in parallel, whereas the original evaluators | |

might evaluate between 1 and 4 (see the "k" column in Table 5.1 on | |

page 165). The original evaluators can map on an arbitrary domain | |

and can map grids on an arbitrary region, whereas the general | |

evaluators only use the [0,1] range. Support for 1D evaluators, | |

an EvalCoord-style interface, and the "mode" parameter of EvalMesh* | |

has also been removed from the general evaluators. | |

The command | |

void MapControlPointsNV(enum target, uint index, enum type, | |

sizei ustride, sizei vstride, | |

int uorder, int vorder, boolean packed, | |

const void *points); | |

specifies control points for a general evaluator map. target | |

is the type of evaluator map and can be either EVAL_2D_NV or | |

EVAL_TRIANGULAR_2D_NV. index is the number of the vertex attribute | |

register the map will be used to evaluate for; these are the same | |

indices used in the GL_NV_vertex_program extension. Table X.1 | |

shows the relationship between these indices and the conventional | |

per-vertex attributes for implementations that do not support | |

GL_NV_vertex_program. | |

Vertex | |

Attribute Conventional Conventional | |

Register Per-vertex Conventional Component | |

Number Parameter Per-vertex Parameter Command Mapping | |

--------- --------------- -------------------------------------- ------------ | |

0 vertex position Vertex x,y,z,w | |

1 vertex weights VertexWeightEXT w,0,0,1 | |

2 normal Normal x,y,z,1 | |

3 primary color Color r,g,b,a | |

4 secondary color SecondaryColorEXT r,g,b,1 | |

5 fog coordinate FogCoordEXT fc,0,0,1 | |

6 - - - | |

7 - - - | |

8 texture coord 0 MultiTexCoordARB(GL_TEXTURE0_ARB, ...) s,t,r,q | |

9 texture coord 1 MultiTexCoordARB(GL_TEXTURE1_ARB, ...) s,t,r,q | |

10 texture coord 2 MultiTexCoordARB(GL_TEXTURE2_ARB, ...) s,t,r,q | |

11 texture coord 3 MultiTexCoordARB(GL_TEXTURE3_ARB, ...) s,t,r,q | |

12 texture coord 4 MultiTexCoordARB(GL_TEXTURE4_ARB, ...) s,t,r,q | |

13 texture coord 5 MultiTexCoordARB(GL_TEXTURE5_ARB, ...) s,t,r,q | |

14 texture coord 6 MultiTexCoordARB(GL_TEXTURE6_ARB, ...) s,t,r,q | |

15 texture coord 7 MultiTexCoordARB(GL_TEXTURE7_ARB, ...) s,t,r,q | |

Table X.1: Aliasing of vertex attributes with conventional per-vertex | |

parameters. | |

type is either FLOAT or DOUBLE. ustride and vstride are the numbers | |

of basic machine units (typically unsigned bytes) between control | |

points in the u and v directions. uorder and vorder have the same | |

meaning they do in the Map2{fd} command. The error INVALID_VALUE | |

is generated if either uorder or vorder is less than one or greater | |

than MAX_EVAL_ORDER. The error INVALID_OPERATION is generated if | |

target is EVAL_TRIANGULAR_2D_NV and uorder is not equal to vorder. | |

points is a pointer to an array of control points. If target is | |

EVAL_2D_NV, there are uorder*vorder control points in the array, | |

and if it is EVAL_TRIANGULAR_2D_NV, there are uorder*(uorder+1)/2 | |

points in the array. If packed is FALSE, control point i,j is | |

located | |

(ustride)i + (vstride)j | |

basic machine units from points. If target is EVAL_2D_NV, i ranges | |

from 0 to uorder-1, and j ranges from 0 to vorder-1. If target is | |

EVAL_TRIANGULAR_2D_NV, i and j range from 0 to uorder-1, and i+j | |

must be less than or equal to uorder-1. | |

If packed is TRUE and target is EVAL_2D_NV, control point i,j is | |

located | |

(ustride)(j*uorder + i) | |

basic machine units from points. If packed is TRUE and target is | |

EVAL_TRIANGULAR_2D_NV, control point i,j is located | |

(ustride)(j*uorder + i - j*(j-1)/2) | |

basic machine units from points. | |

The error INVALID_OPERATION is generated if index is 0, one of the | |

control points' fourth components is not equal to 1, and either uorder | |

of vorder is greater than MAX_RATIONAL_EVAL_ORDER_NV. | |

The evaluation of a 2D tensor product map is performed in the same | |

way as for the original evaluators. The exact coordinates produced | |

by the original evaluators may differ from those produced by the | |

general evaluators, since different algorithms may be used. | |

A triangular map may be evaluated as follows. Let Ri,j be the | |

4-component vector for control point i,j and n be the degree of the | |

patch (i.e. uorder-1). Then: | |

--- | |

\ (n) (n-i) i j n-i-j | |

p_t(u,v) = / (i) ( j ) u v (1-u-v) Ri,j | |

--- | |

i,j >= 0 | |

i+j <= n | |

evaluates the point p_t(u,v) on the triangular patch at parameter | |

values (u,v). (The notation on the left indicates "n choose i" and | |

"n minus i choose j", i.e., binomial coefficients.) | |

The evaluation of any particular attribute can be enabled or disabled | |

with Enable and Disable using one of the EVAL_VERTEX_ATTRIBi_NV | |

constants. | |

If AUTO_NORMAL is enabled (see section 5.1), analytically computed | |

normals are evaluated as well. The formula for the normal is the same | |

as the one in section 5.1, except that the magnitude of the normals is | |

undefined. These normals should be renormalized by enabling NORMALIZE, | |

or by normalizing them in a vertex program. The w of the normal | |

vertex attribute will always be 1. | |

The commands | |

void MapParameter{if}vNV(enum target, enum pname, T params); | |

can be used to specify the level of tessellation to evaluate, | |

where target is EVAL_2D_NV or EVAL_TRIANGULAR_2D_NV and pname is | |

MAP_TESSELLATION_NV. If target is EVAL_2D_NV, params contains the | |

four values [nu0,nu1,nv0,nv1], and if it is EVAL_TRIANGULAR_2D_NV, | |

params contains the three values [n1,n2,n3]. The state for each | |

target is independent of the other. These values are clamped to | |

the range [1.0, MAX_MAP_TESSELLATION_NV]. | |

The use of a fractional tessellation algorithm can be | |

enabled or disabled with Enable and Disable using the | |

EVAL_FRACTIONAL_TESSELLATION_NV constant. The fractional tessellation | |

algorithm allows the tessellation to smoothly morph without popping | |

as the tessellation parameters are varied by small amounts. | |

The command | |

void EvalMapsNV(enum target, enum mode); | |

evaluates the currently enabled maps. target is either EVAL_2D_NV | |

or EVAL_TRIANGULAR_2D and specifies which set of maps to evaluate. | |

mode must be FILL. If EVAL_VERTEX_ATTRIB0_NV is not enabled, the | |

error INVALID_OPERATION results. | |

If EVAL_FRACTIONAL_TESSELLATION_NV is disabled, tensor product maps | |

are evaluated such that the boundaries of the mesh are divided into | |

ceil(nu0) segments on the edge from (0,0) to (1,0), ceil(nu1) segments | |

on the edge from (0,1) to (1,1), ceil(nv0) segments on the edge from | |

(0,0) to (0,1), and ceil(nv1) segments on the edge from (1,0) to | |

(1,1). These segments must be evaluated at equal spacings in (u,v) | |

parameter space. | |

Triangular maps are evaluated such that the boundary of the mesh from | |

(0,0) to (1,0) has ceil(n1) equally-spaced segments, the boundary | |

from (1,0) to (0,1) has ceil(n2) equally-spaced segments, and the | |

boundary from (0,1) to (0,0) has ceil(n3) equally-spaced segments. | |

If EVAL_FRACTIONAL_TESSELLATION_NV is enabled, each edge must be | |

tessellated with no fewer the number of segments that would be used in | |

the non- fractional case for any values of the tessellation parameters. | |

Furthermore, the tessellation of each edge must vary smoothly with the | |

parameters; that is, a small change in any or all of the parameters | |

must cause a small change in the tessellation. Whenever a new vertex | |

is introduced into the tessellation, it must be coincident with another | |

vertex, and whenever a vertex is removed, it must have been coincident | |

with a different vertex. The parameter-space position of any vertex | |

must be a continuous function of the tessellation parameters. | |

The same minimum triangle requirements apply to fractional | |

tessellations as to integral tessellations. | |

A tensor product patch must always be tessellated with no fewer than | |

2 * ceil((nu0+nu1)/2) * ceil((nv0+nv1)/2) | |

triangles in total. | |

A triangular patch must always be tessellated with no fewer than | |

ceil((n1+n2+n3)/3)^2 | |

triangles in total. | |

If a triangle is formed by evaluating the maps at the three | |

coordinates (u1,v1), (u2,v2), and (u3,v3), it must be true that | |

(u3-u1)*(v2-v1) - (u2-u1)*(v3-v1) >= 0 | |

to ensure that all triangles in a patch have a consistent | |

orientation. | |

The current value of any vertex attribute for which the evaluation | |

of a map is enabled becomes undefined after an EvalMapsNV command. | |

If AUTO_NORMAL is enabled, the current normal becomes undefined as | |

well. | |

If AUTO_NORMAL is enabled, the analytically computed normals take | |

precedence over the currently enabled map for vertex attribute 2 | |

(the normal). | |

To prevent cracks, certain rules must be established for performing | |

the evaluations. The goal of these rules is to ensure that no | |

matter what order control points are specified in and what the | |

tessellation parameters are, so long as the control points on any edge | |

exactly match the control points of an adjacent edge, and so long as | |

the subdivision parameter for that edge is the same for the adjacent | |

patch, there will be no cracking artifacts between the two patches. | |

These requirements are completely independent of numerical precision. | |

In particular, we will require that these shared vertices' positions | |

be equal. Furthermore, there must be no cracking inside the geometry | |

of any patch, and normals must not change in a discontinuous fashion | |

so that there are no discontinuities in lighting or other effects | |

that use the normal. | |

Let two patches share an edge of equal order (the order of an edge is | |

the order of the patch in that direction for a tensor product patch, | |

or the order of the patch for a triangular patch). Then this edge is | |

said to be consistent if all the vertex control points (vertex | |

attribute 0) are identical on each edge (although they may be specified | |

in the opposite direction, or even in a different coordinate; one may | |

an edge in the u direction, and one may be an edge in the v direction). | |

If an edge is consistent, and if each of the two patches are | |

tessellated with identical tessellation parameters for that edge, | |

then the vertex coordinates given to vertex processing must be | |

exactly equal for each of the vertices. | |

The vertex coordinates given to vertex processing for the corner | |

vertices of any patch must be exactly equal to the values of the | |

corner control points of that patch, regardless of the patch's | |

order, type, tessellation parameters, the state of the AUTO_NORMAL or | |

EVAL_FRACTIONAL_TESSELLATION_NV enables, the control points, order, | |

or enable of any other associated map, or any other OpenGL state. | |

The vertex coordinates and normals given to vertex processing for | |

any vertex of a patch must be exactly equal each time that vertex | |

is evaluated during the tessellation of a patch. Since each vertex | |

is shared between several triangles in the patch, any variation in | |

these coordinates and normals would result in cracks or lighting | |

discontinuities. | |

The state required for the general evaluators consists of a bit | |

indicating whether fractional tessellation is enabled or disabled, 16 | |

bits indicating whether the evaluation of each vertex attribute is | |

enabled or disabled, four floating-point map tessellation values for | |

tensor product patches, three floating-point map tessellation values | |

for triangular patches, and a map specification for a tensor product | |

patch and a triangular patch for each vertex attribute. A map | |

specification consists of two integers indicating the order of the | |

map in u and v and a two-dimensional array of vectors of four | |

floating-point values containing the control points for that map. | |

The initial state of fractional tessellation is disabled. The initial | |

state of evaluation of vertex attribute 0 is enabled, and the initial | |

state of evaluation for any other vertex attribute is disabled. The | |

initial value of the tessellation parameters is 1.0. The initial order | |

of each map specification is an order of 1 in both u and v and a | |

single control point of [0,0,0,1]." | |

Additions to Chapter 6 of the 1.2 Specification (State and State Requests) | |

-- NEW Section 6.1.13 "General Evaluator Queries" | |

"The commands | |

void GetMapParameterivNV(enum target, enum pname, int *params); | |

void GetMapParameterfvNV(enum target, enum pname, float *params); | |

obtain the parameters for a map target. target may be one of | |

EVAL_2D_NV or EVAL_TRIANGULAR_2D_NV. pname must be MAP_TESSELLATION_NV. | |

The map tessellation is placed in params. | |

The commands | |

void GetMapAttribParameterivNV(enum target, uint index, enum pname, | |

int *params); | |

void GetMapAttribParameterfvNV(enum target, uint index, enum pname, | |

float *params); | |

obtain parameters for a single map. target may be one of EVAL_2D_NV | |

or EVAL_TRIANGULAR_2D_NV. index is the number of the vertex attribute | |

register the map is used for evaluating. If pname is | |

MAP_ATTRIB_U_ORDER_NV, the u order of the map is placed in params. If | |

pname is MAP_ATTRIB_V_ORDER_NV, the v order of the map is placed in | |

params. | |

The command | |

void GetMapControlPointsNV(enum target, uint index, enum type, | |

sizei ustride, sizei vstride, boolean packed, | |

void *points); | |

obtains the control points of a map. target may be one of EVAL_2D_NV | |

or EVAL_TRIANGULAR_2D_NV. index is the number of the vertex attribute | |

register the map is used for evaluating. type is either FLOAT or | |

DOUBLE. ustride and vstride are the numbers of basic machine units | |

(typically unsigned bytes) between control points in the u and v | |

directions. points is a pointer to an array where the control points | |

are to be written. If target is EVAL_2D_NV, there are uorder*vorder | |

control points in the array, and if it is EVAL_TRIANGULAR_2D_NV, there | |

are uorder*(uorder+1)/2 points in the array. If packed is FALSE, | |

control point i,j is located | |

(ustride)i + (vstride)j | |

basic machine units from points. If packed is TRUE and target is | |

EVAL_2D_NV, control point i,j is located | |

(ustride)(j*uorder + i) | |

basic machine units from points. If packed is TRUE and target is | |

EVAL_TRIANGULAR_2D_NV, control point i,j is located | |

(ustride)(j*uorder + i - j*(j-1)/2) | |

basic machine units from points. If target is EVAL_2D_NV, i ranges | |

from 0 to uorder-1, and j ranges from 0 to vorder-1. If target is | |

EVAL_TRIANGULAR_2D_NV, i and j range from 0 to uorder-1, and i+j | |

must be less than or equal to uorder-1." | |

Additions to the GLX Specification | |

Nine new GL commands are added. | |

The following three rendering commands are sent to the sever | |

as part of a glXRender request: | |

MapParameterivNV | |

2 12+4*n rendering command length | |

2 ???? rendering command opcode | |

4 ENUM target | |

4 ENUM pname | |

0x86C2 GL_MAP_TESSELLATION_NV | |

n=3 if (target == GL_EVAL_TRIANGULAR_2D_NV) | |

n=4 if (target == GL_EVAL_2D_NV) | |

else n=0 command is erroneous | |

4*n LISTofINT32 params | |

MapParameterfvNV | |

2 12+4*n rendering command length | |

2 ???? rendering command opcode | |

4 ENUM target | |

4 ENUM pname | |

0x86C2 GL_MAP_TESSELLATION_NV | |

n=3 if (target == GL_EVAL_TRIANGULAR_2D_NV) | |

n=4 if (target == GL_EVAL_2D_NV) | |

else n=0 command is erroneous | |

4*n LISTofFLOAT32 params | |

EvalMapsNV | |

2 12 rendering command length | |

2 ???? rendering command opcode | |

4 ENUM target | |

4 ENUM mode | |

The following rendering command is potentially large and can be sent | |

in a glXRender or glXRenderLarge request: | |

MapControlPointsNV | |

2 24+m rendering command length | |

2 ???? rendering command opcode | |

4 ENUM target | |

4 CARD32 index | |

4 CARD32 type | |

4 INT32 uorder | |

4 INT32 vorder | |

m (see below) points | |

Determine m from the table below; n depends on the target. If the | |

target is GL_EVAL_2D_NV, then n = uorder*vorder. If the target | |

is GL_EVAL_TRIANGULAR_2D_NV, then n = uorder * (uorder+1)/2. | |

The points data is packed such that when unpacked by the server, | |

the value of ustride is 16 for GL_FLOAT typed data and 32 for | |

GL_DOUBLE typed data. | |

type encoding of type type of lists m (bytes) | |

--------- ---------------- ------------- --------- | |

GL_FLOAT 0x1406 LISTofFLOAT32 n*4 | |

GL_DOUBLE 0x140A LISTofFLOAT64 n*8 | |

If the command is encoded in a glXRenderLarge request, the command | |

opcode and command length fields above are expanded to 4 bytes each: | |

4 28+m rendering command length | |

4 ???? rendering command opcode | |

The remaining five commands are non-rendering commands. These commands | |

are sent separately (i.e., not as part of a glXRender or glXRenderLarge | |

request), using the glXVendorPrivateWithReply request: | |

GetMapParameterivNV | |

1 CARD8 opcode (X assigned) | |

1 17 GLX opcode (glXVendorPrivateWithReply) | |

2 5 request length | |

4 ???? vendor specific opcode | |

4 GLX_CONTEXT_TAG context tag | |

4 ENUM target | |

4 ENUM pname | |

=> | |

1 1 reply | |

1 unused | |

2 CARD16 sequence number | |

4 m reply length, m=(n==1?0:n) | |

4 unused | |

4 CARD32 n | |

if (n=1) this follows: | |

4 INT32 params | |

12 unused | |

otherwise this follows: | |

16 unused | |

n*4 LISTofINT32 params | |

GetMapParameterfvNV | |

1 CARD8 opcode (X assigned) | |

1 17 GLX opcode (glXVendorPrivateWithReply) | |

2 5 request length | |

4 ???? vendor specific opcode | |

4 GLX_CONTEXT_TAG context tag | |

4 ENUM target | |

4 ENUM pname | |

=> | |

1 1 reply | |

1 unused | |

2 CARD16 sequence number | |

4 m reply length, m=(n==1?0:n) | |

4 unused | |

4 CARD32 n | |

if (n=1) this follows: | |

4 FLOAT32 params | |

12 unused | |

otherwise this follows: | |

16 unused | |

n*4 LISTofFLOAT32 params | |

GetMapAttribParameterivNV | |

1 CARD8 opcode (X assigned) | |

1 17 GLX opcode (glXVendorPrivateWithReply) | |

2 6 request length | |

4 ???? vendor specific opcode | |

4 GLX_CONTEXT_TAG context tag | |

4 ENUM target | |

4 CARD32 index | |

4 ENUM pname | |

=> | |

1 1 reply | |

1 unused | |

2 CARD16 sequence number | |

4 m reply length, m=(n==1?0:n) | |

4 unused | |

4 CARD32 n | |

if (n=1) this follows: | |

4 INT32 params | |

12 unused | |

otherwise this follows: | |

16 unused | |

n*4 LISTofINT32 params | |

GetMapAttribParameterfvNV | |

1 CARD8 opcode (X assigned) | |

1 17 GLX opcode (glXVendorPrivateWithReply) | |

2 6 request length | |

4 ???? vendor specific opcode | |

4 GLX_CONTEXT_TAG context tag | |

4 ENUM target | |

4 CARD32 index | |

4 ENUM pname | |

=> | |

1 1 reply | |

1 unused | |

2 CARD16 sequence number | |

4 m reply length, m=(n==1?0:n) | |

4 unused | |

4 CARD32 n | |

if (n=1) this follows: | |

4 FLOAT32 params | |

12 unused | |

otherwise this follows: | |

16 unused | |

n*4 LISTofFLOAT32 params | |

GetMapControlPointsNV | |

1 CARD8 opcode (X assigned) | |

1 17 GLX opcode (glXVendorPrivateWithReply) | |

2 6 request length | |

4 ???? vendor specific opcode | |

4 GLX_CONTEXT_TAG context tag | |

4 ENUM target | |

4 CARD32 index | |

4 ENUM type | |

=> | |

1 1 reply | |

1 unused | |

2 CARD16 sequence number | |

4 m reply length, m | |

4 unused | |

4 CARD32 uorder | |

4 CARD32 vorder | |

12 unused | |

if type == 0x1406 (GL_FLOAT) and target == 0x86C0 | |

(GL_EVAL_2D_NV), m = 4*uorder*vorder and the packed control | |

points follow assuming ustride = 16 | |

m*4 LISTofFLOAT32 params | |

if type == 0x140A (GL_DOUBLE) and target == 0x86C0 | |

(GL_EVAL_2D_NV), m = 4*uorder*vorder and the packed control | |

points follow asssuming ustride = 32 | |

m*8 LISTofFLOAT64 params | |

if type == 0x1406 (GL_FLOAT) and target == 0x86C1 | |

(GL_EVAL_TRIANGULAR_2D_NV), m = 4*uorder*(uorder+1)/2 and | |

the packed control points follow assuming ustride = 16 | |

m*4 LISTofFLOAT32 params | |

if type == 0x140A (GL_DOUBLE) and target == 0x86C1 | |

(GL_EVAL_TRIANGULAR_2D_NV), m = 4*uorder*(uorder+1)/2 and | |

the packed control points follow asssuming ustride = 32 | |

m*8 LISTofFLOAT64 params | |

otherwise m = 0 and nothing else follows. | |

Errors | |

The error INVALID_VALUE is generated if MapControlPointsNV, | |

GetMapControlPointsNV, or GetMapAttribParameter{if}v is called where | |

index is greater than 15. | |

The error INVALID_VALUE is generated if MapControlPointsNV | |

or GetMapControlPointsNV is called where ustride or vstride is | |

negative. | |

The error INVALID_VALUE is generated if MapControlPointsNV is | |

called where uorder or vorder is less than one or greater than | |

MAX_EVAL_ORDER. | |

The error INVALID_OPERATION is generated if MapControlPointsNV is | |

called where target is EVAL_TRIANGULAR_2D_NV and uorder is not equal | |

to vorder. | |

The error INVALID_OPERATION is generated if MapControlPointsNV is | |

called where index is 0, one of the control points' fourth | |

components is not equal to 1, and either uorder of vorder is greater | |

than MAX_RATIONAL_EVAL_ORDER_NV. | |

The error INVALID_OPERATION is generated if EvalMapsNV is called | |

where EVAL_VERTEX_ATTRIB0_NV is disabled. | |

New State | |

(add to table 6.22, page 212) | |

Get Value Type Get Command Initial Value Description Sec Attribute | |

------------------------------- ----------- ------------------------ ---------------- -------------- ----- --------- | |

EVAL_FRACTIONAL_TESSELLATION_NV B IsEnabled False fractional 5.7 eval/enable | |

tess. enable | |

EVAL_VERTEX_ATTRIBi_NV Bx16 IsEnabled True if i=0, attrib eval 5.7 eval/enable | |

false otherwise enable | |

EVAL_2D_NV R4x16x8*x8* GetMapControlPointsNV [0,0,0,1] control points 5.7 - | |

EVAL_TRIANGULAR_2D_NV R4x16x8*x8* GetMapControlPoints [0,0,0,1] control points 5.7 - | |

MAP_TESSELLATION_NV R4,R3 GetMapParameter*NV all 1.0 level of 5.7 eval | |

tessellation | |

MAP_ATTRIB_U_ORDER_NV Z8*x16x2 GetMapAttribParameter*NV 1 map order in 5.7 - | |

U direction | |

MAP_ATTRIB_V_ORDER_NV Z8*x16x2 GetMapAttribParameter*NV 1 map order in 5.7 - | |

V direction | |

New Implementation Dependent State | |

(add to table 6.24/6.25, page 214) | |

Get Value Type Get Command Minimum Value Description Sec Attribute | |

------------------------ ---- ------------ ------------- ----------- ----- --------- | |

MAX_MAP_TESSELLATION_NV Z+ GetIntegerv 256 maximum level 5.7 - | |

of tessellation | |

MAX_RATIONAL_EVAL_ORDER_NV Z+ GetIntegerv 4 maximum order 5.7 - | |

of rational | |

surfaces | |

Revision History | |

1/3/2003 changed status to "discontinued" |