| libpng.txt - A description on how to use and modify libpng |
| |
| libpng version 1.0.1 March 9, 1998 |
| Updated and distributed by Glenn Randers-Pehrson |
| <randeg@alumni.rpi.edu> |
| Copyright (c) 1998, Glenn Randers-Pehrson |
| For conditions of distribution and use, see copyright |
| notice in png.h. |
| |
| based on: |
| |
| libpng 1.0 beta 6 version 0.96 May 28, 1997 |
| Updated and distributed by Andreas Dilger |
| Copyright (c) 1996, 1997 Andreas Dilger |
| |
| libpng 1.0 beta 2 - version 0.88 January 26, 1996 |
| For conditions of distribution and use, see copyright |
| notice in png.h. Copyright (c) 1995, 1996 Guy Eric |
| Schalnat, Group 42, Inc. |
| |
| Updated/rewritten per request in the libpng FAQ |
| Copyright (c) 1995 Frank J. T. Wojcik |
| December 18, 1995 && January 20, 1996 |
| |
| Introduction |
| |
| This file describes how to use and modify the PNG reference library |
| (known as libpng) for your own use. There are five sections to this |
| file: introduction, structures, reading, writing, and modification and |
| configuration notes for various special platforms. In addition to this |
| file, example.c is a good starting point for using the library, as |
| it is heavily commented and should include everything most people |
| will need. We assume that libpng is already installed; see the |
| INSTALL file for instructions on how to install libpng. |
| |
| Libpng was written as a companion to the PNG specification, as a way |
| of reducing the amount of time and effort it takes to support the PNG |
| file format in application programs. The PNG specification is available |
| as RFC 2083 <ftp://ftp.uu.net/graphics/png/documents/> and as a |
| W3C Recommendation <http://www.w3.org/TR/REC.png.html>. Some |
| additional chunks are described in the special-purpose public chunks |
| documents at <ftp://ftp.uu.net/graphics/png/documents/>. Other information |
| about PNG can be found at the PNG home page, <http://www.cdrom.com/pub/png/>. |
| |
| Most users will not have to modify the library significantly; advanced |
| users may want to modify it more. All attempts were made to make it as |
| complete as possible, while keeping the code easy to understand. |
| Currently, this library only supports C. Support for other languages |
| is being considered. |
| |
| Libpng has been designed to handle multiple sessions at one time, |
| to be easily modifiable, to be portable to the vast majority of |
| machines (ANSI, K&R, 16-, 32-, and 64-bit) available, and to be easy |
| to use. The ultimate goal of libpng is to promote the acceptance of |
| the PNG file format in whatever way possible. While there is still |
| work to be done (see the TODO file), libpng should cover the |
| majority of the needs of its users. |
| |
| Libpng uses zlib for its compression and decompression of PNG files. |
| The zlib compression utility is a general purpose utility that is |
| useful for more than PNG files, and can be used without libpng. |
| See the documentation delivered with zlib for more details. |
| You can usually find the source files for the zlib utility wherever you |
| find the libpng source files. |
| |
| Libpng is thread safe, provided the threads are using different |
| instances of the structures. Each thread should have its own |
| png_struct and png_info instances, and thus its own image. |
| Libpng does not protect itself against two threads using the |
| same instance of a structure. |
| |
| |
| II. Structures |
| |
| There are two main structures that are important to libpng, png_struct |
| and png_info. The first, png_struct, is an internal structure that |
| will not, for the most part, be used by a user except as the first |
| variable passed to every libpng function call. |
| |
| The png_info structure is designed to provide information about the |
| PNG file. At one time, the fields of png_info were intended to be |
| directly accessible to the user. However, this tended to cause problems |
| with applications using dynamically loaded libraries, and as a result |
| a set of interface functions for png_info was developed. The fields |
| of png_info are still available for older applications, but it is |
| suggested that applications use the new interfaces if at all possible. |
| |
| The png.h header file is an invaluable reference for programming with libpng. |
| And while I'm on the topic, make sure you include the libpng header file: |
| |
| #include <png.h> |
| |
| III. Reading |
| |
| Reading PNG files: |
| |
| We'll now walk you through the possible functions to call when reading |
| in a PNG file, briefly explaining the syntax and purpose of each one. |
| See example.c and png.h for more detail. While Progressive reading |
| is covered in the next section, you will still need some of the |
| functions discussed in this section to read a PNG file. |
| |
| You will want to do the I/O initialization(*) before you get into libpng, |
| so if it doesn't work, you don't have much to undo. Of course, you |
| will also want to insure that you are, in fact, dealing with a PNG |
| file. Libpng provides a simple check to see if a file is a PNG file. |
| To use it, pass in the first 1 to 8 bytes of the file, and it will |
| return true or false (1 or 0) depending on whether the bytes could be |
| part of a PNG file. Of course, the more bytes you pass in, the |
| greater the accuracy of the prediction. |
| |
| If you are intending to keep the file pointer open for use in libpng, |
| you must ensure you don't read more than 8 bytes from the beginning |
| of the file, and you also have to make a call to png_set_sig_bytes_read() |
| with the number of bytes you read from the beginning. Libpng will |
| then only check the bytes (if any) that your program didn't read. |
| |
| (*): If you are not using the standard I/O functions, you will need |
| to replace them with custom functions. See the discussion under |
| Customizing libpng. |
| |
| |
| FILE *fp = fopen(file_name, "rb"); |
| if (!fp) |
| { |
| return; |
| } |
| fread(header, 1, number, fp); |
| is_png = png_check_sig(header, 0, number); |
| if (!is_png) |
| { |
| return; |
| } |
| |
| |
| Next, png_struct and png_info need to be allocated and initialized. In |
| order to ensure that the size of these structures is correct even with a |
| dynamically linked libpng, there are functions to initialize and |
| allocate the structures. We also pass the library version, optional |
| pointers to error handling functions, and a pointer to a data struct for |
| use by the error functions, if necessary (the pointer and functions can |
| be NULL if the default error handlers are to be used). See the section |
| on Changes to Libpng below regarding the old initialization functions. |
| |
| png_structp png_ptr = png_create_read_struct |
| (PNG_LIBPNG_VER_STRING, (void *)user_error_ptr, |
| user_error_fn, user_warning_fn); |
| if (!png_ptr) |
| return; |
| |
| png_infop info_ptr = png_create_info_struct(png_ptr); |
| if (!info_ptr) |
| { |
| png_destroy_read_struct(&png_ptr, |
| (png_infopp)NULL, (png_infopp)NULL); |
| return; |
| } |
| |
| png_infop end_info = png_create_info_struct(png_ptr); |
| if (!end_info) |
| { |
| png_destroy_read_struct(&png_ptr, &info_ptr, |
| (png_infopp)NULL); |
| return; |
| } |
| |
| |
| The error handling routines passed to png_create_read_struct() are only |
| necessary if you are not using the libpng supplied error handling |
| functions. When libpng encounters an error, it expects to longjmp back |
| to your routine. Therefore, you will need to call setjmp and pass the |
| jmpbuf field of your png_struct. If you read the file from different |
| routines, you will need to update the jmpbuf field every time you enter |
| a new routine that will call a png_ function. |
| |
| See your documentation of setjmp/longjmp for your compiler for more |
| handling in the Customizing Libpng section below for more information on |
| the libpng error handling. If an error occurs, and libpng longjmp's |
| back to your setjmp, you will want to call png_destroy_read_struct() to |
| free any memory. |
| |
| if (setjmp(png_ptr->jmpbuf)) |
| { |
| png_destroy_read_struct(&png_ptr, &info_ptr, |
| &end_info); |
| fclose(fp); |
| return; |
| } |
| |
| Now you need to set up the input code. The default for libpng is to |
| use the C function fread(). If you use this, you will need to pass a |
| valid FILE * in the function png_init_io(). Be sure that the file is |
| opened in binary mode. If you wish to handle reading data in another |
| way, you need not call the png_init_io() function, but you must then |
| implement the libpng I/O methods discussed in the Customizing Libpng |
| section below. |
| |
| png_init_io(png_ptr, fp); |
| |
| If you had previously opened the file and read any of the signature from |
| the beginning in order to see if this was a PNG file, you need to let |
| libpng know that there are some bytes missing from the start of the file. |
| |
| png_set_sig_bytes(png_ptr, number); |
| |
| At this point, you can set up a callback function that will be |
| called after each row has been read, which you can use to control |
| a progress meter or the like. It's demonstrated in pngtest.c. |
| You must supply a function |
| |
| void read_row_callback(png_ptr, png_uint_32 row, int pass); |
| { |
| /* put your code here */ |
| } |
| |
| (You can give it another name that you like instead of "read_row_callback") |
| |
| To inform libpng about your function, use |
| |
| png_set_read_status_fn(png_ptr, read_row_callback); |
| |
| In PNG files, the alpha channel in an image is the level of opacity. |
| If you need the alpha channel in an image to be the level of transparency |
| instead of opacity, you can invert the alpha channel (or the tRNS chunk |
| data) after it's read, so that 0 is fully opaque and 255 (in 8-bit or |
| paletted images) or 65535 (in 16-bit images) is fully transparent, with |
| |
| png_set_invert_alpha(png_ptr); |
| |
| This has to appear here rather than later with the other transformations |
| because the tRNS chunk data must be modified in the case of paletted images. |
| If your image is not a paletted image, the tRNS data (which in such cases |
| represents a single color to be rendered as transparent) won't be changed. |
| |
| Finally, you can write your own transformation function if none of |
| the existing ones meets your needs. This is done by setting a callback |
| with |
| |
| png_set_read_user_transform_fn(png_ptr, |
| read_transform_fn); |
| |
| You must supply the function |
| |
| void read_transform_fn(png_ptr ptr, row_info_ptr |
| row_info, png_bytep data) |
| |
| See pngtest.c for a working example. Your function will be called |
| after all of the other transformations have been processed. |
| |
| You are now ready to read all the file information up to the actual |
| image data. You do this with a call to png_read_info(). |
| |
| png_read_info(png_ptr, info_ptr); |
| |
| Functions are used to get the information from the info_ptr: |
| |
| png_get_IHDR(png_ptr, info_ptr, &width, &height, |
| &bit_depth, &color_type, &interlace_type, |
| &compression_type, &filter_type); |
| |
| width - holds the width of the image |
| in pixels (up to 2^31). |
| height - holds the height of the image |
| in pixels (up to 2^31). |
| bit_depth - holds the bit depth of one of the |
| image channels. (valid values are |
| 1, 2, 4, 8, 16 and depend also on |
| the color_type. See also |
| significant bits (sBIT) below). |
| color_type - describes which color/alpha channels |
| are present. |
| PNG_COLOR_TYPE_GRAY |
| (bit depths 1, 2, 4, 8, 16) |
| PNG_COLOR_TYPE_GRAY_ALPHA |
| (bit depths 8, 16) |
| PNG_COLOR_TYPE_PALETTE |
| (bit depths 1, 2, 4, 8) |
| PNG_COLOR_TYPE_RGB |
| (bit_depths 8, 16) |
| PNG_COLOR_TYPE_RGB_ALPHA |
| (bit_depths 8, 16) |
| |
| PNG_COLOR_MASK_PALETTE |
| PNG_COLOR_MASK_COLOR |
| PNG_COLOR_MASK_ALPHA |
| |
| filter_type - (must be PNG_FILTER_TYPE_BASE |
| for PNG 1.0) |
| compression_type - (must be PNG_COMPRESSION_TYPE_BASE |
| for PNG 1.0) |
| interlace_type - (PNG_INTERLACE_NONE or |
| PNG_INTERLACE_ADAM7) |
| Any or all of interlace_type, compression_type, of |
| filter_type can be |
| NULL if you are not interested in their values. |
| |
| channels = png_get_channels(png_ptr, info_ptr); |
| channels - number of channels of info for the |
| color type (valid values are 1 (GRAY, |
| PALETTE), 2 (GRAY_ALPHA), 3 (RGB), |
| 4 (RGB_ALPHA or RGB + filler byte)) |
| rowbytes = png_get_rowbytes(png_ptr, info_ptr); |
| rowbytes - number of bytes needed to hold a row |
| |
| signature = png_get_signature(png_ptr, info_ptr); |
| signature - holds the signature read from the |
| file (if any). The data is kept in |
| the same offset it would be if the |
| whole signature were read (i.e. if an |
| application had already read in 4 |
| bytes of signature before starting |
| libpng, the remaining 4 bytes would |
| be in signature[4] through signature[7] |
| (see png_set_sig_bytes())). |
| |
| |
| width = png_get_image_width(png_ptr, |
| info_ptr); |
| height = png_get_image_height(png_ptr, |
| info_ptr); |
| bit_depth = png_get_bit_depth(png_ptr, |
| info_ptr); |
| color_type = png_get_color_type(png_ptr, |
| info_ptr); |
| filter_type = png_get_filter_type(png_ptr, |
| info_ptr); |
| compression_type = png_get_compression_type(png_ptr, |
| info_ptr); |
| interlace_type = png_get_interlace_type(png_ptr, |
| info_ptr); |
| |
| |
| These are also important, but their validity depends on whether the chunk |
| has been read. The png_get_valid(png_ptr, info_ptr, PNG_INFO_<chunk>) and |
| png_get_<chunk>(png_ptr, info_ptr, ...) functions return non-zero if the |
| data has been read, or zero if it is missing. The parameters to the |
| png_get_<chunk> are set directly if they are simple data types, or a pointer |
| into the info_ptr is returned for any complex types. |
| |
| png_get_PLTE(png_ptr, info_ptr, &palette, |
| &num_palette); |
| palette - the palette for the file |
| (array of png_color) |
| num_palette - number of entries in the palette |
| |
| png_get_gAMA(png_ptr, info_ptr, &gamma); |
| gamma - the gamma the file is written |
| at (PNG_INFO_gAMA) |
| |
| png_get_sRGB(png_ptr, info_ptr, &srgb_intent); |
| srgb_intent - the rendering intent (PNG_INFO_sRGB) |
| The presence of the sRGB chunk |
| means that the pixel data is in the |
| sRGB color space. This chunk also |
| implies specific values of gAMA and |
| cHRM. |
| |
| png_get_sBIT(png_ptr, info_ptr, &sig_bit); |
| sig_bit - the number of significant bits for |
| (PNG_INFO_sBIT) each of the gray, |
| red, green, and blue channels, |
| whichever are appropriate for the |
| given color type (png_color_16) |
| |
| png_get_tRNS(png_ptr, info_ptr, &trans, &num_trans, |
| &trans_values); |
| trans - array of transparent entries for |
| palette (PNG_INFO_tRNS) |
| trans_values - transparent pixel for non-paletted |
| images (PNG_INFO_tRNS) |
| num_trans - number of transparent entries |
| (PNG_INFO_tRNS) |
| |
| png_get_hIST(png_ptr, info_ptr, &hist); |
| (PNG_INFO_hIST) |
| hist - histogram of palette (array of |
| png_color_16) |
| |
| png_get_tIME(png_ptr, info_ptr, &mod_time); |
| mod_time - time image was last modified |
| (PNG_VALID_tIME) |
| |
| png_get_bKGD(png_ptr, info_ptr, &background); |
| background - background color (PNG_VALID_bKGD) |
| |
| num_text = png_get_text(png_ptr, info_ptr, &text_ptr); |
| text_ptr - array of png_text holding image |
| comments |
| text_ptr[i]->key - keyword for comment. |
| text_ptr[i]->text - text comments for current |
| keyword. |
| text_ptr[i]->compression - type of compression used |
| on "text" PNG_TEXT_COMPRESSION_NONE |
| or PNG_TEXT_COMPRESSION_zTXt |
| num_text - number of comments |
| |
| png_get_oFFs(png_ptr, info_ptr, &offset_x, &offset_y, |
| &unit_type); |
| offset_x - positive offset from the left edge |
| of the screen |
| offset_y - positive offset from the top edge |
| of the screen |
| unit_type - PNG_OFFSET_PIXEL, PNG_OFFSET_MICROMETER |
| |
| png_get_pHYs(png_ptr, info_ptr, &res_x, &res_y, |
| &unit_type); |
| res_x - pixels/unit physical resolution in |
| x direction |
| res_y - pixels/unit physical resolution in |
| x direction |
| unit_type - PNG_RESOLUTION_UNKNOWN, |
| PNG_RESOLUTION_METER |
| |
| The data from the pHYs chunk can be retrieved in several convenient |
| forms: |
| |
| res_x = png_get_x_pixels_per_meter(png_ptr, |
| info_ptr) |
| res_y = png_get_y_pixels_per_meter(png_ptr, |
| info_ptr) |
| res_x_and_y = png_get_pixels_per_meter(png_ptr, |
| info_ptr) |
| aspect_ratio = png_get_pixel_aspect_ratio(png_ptr, |
| info_ptr) |
| |
| (Each of these returns 0 [signifying "unknown"] if |
| the data is not present or if res_x is 0; |
| res_x_and_y is 0 if res_x != res_y) |
| |
| For more information, see the png_info definition in png.h and the |
| PNG specification for chunk contents. Be careful with trusting |
| rowbytes, as some of the transformations could increase the space |
| needed to hold a row (expand, filler, gray_to_rgb, etc.). |
| See png_read_update_info(), below. |
| |
| A quick word about text_ptr and num_text. PNG stores comments in |
| keyword/text pairs, one pair per chunk, with no limit on the number |
| of text chunks, and a 2^31 byte limit on their size. While there are |
| suggested keywords, there is no requirement to restrict the use to these |
| strings. It is strongly suggested that keywords and text be sensible |
| to humans (that's the point), so don't use abbreviations. Non-printing |
| symbols are not allowed. See the PNG specification for more details. |
| There is also no requirement to have text after the keyword. |
| |
| Keywords should be limited to 79 Latin-1 characters without leading or |
| trailing spaces, but non-consecutive spaces are allowed within the |
| keyword. It is possible to have the same keyword any number of times. |
| The text_ptr is an array of png_text structures, each holding pointer |
| to a keyword and a pointer to a text string. Only the text string may |
| be null. The keyword/text pairs are put into the array in the order |
| that they are received. However, some or all of the text chunks may be |
| after the image, so, to make sure you have read all the text chunks, |
| don't mess with these until after you read the stuff after the image. |
| This will be mentioned again below in the discussion that goes with |
| png_read_end(). |
| |
| After you've read the header information, you can set up the library |
| to handle any special transformations of the image data. The various |
| ways to transform the data will be described in the order that they |
| should occur. This is important, as some of these change the color |
| type and/or bit depth of the data, and some others only work on |
| certain color types and bit depths. Even though each transformation |
| checks to see if it has data that it can do something with, you should |
| make sure to only enable a transformation if it will be valid for the |
| data. For example, don't swap red and blue on grayscale data. |
| |
| The colors used for the background and transparency values should be |
| supplied in the same format/depth as the current image data. They |
| are stored in the same format/depth as the image data in a bKGD or tRNS |
| chunk, so this is what libpng expects for this data. The colors are |
| transformed to keep in sync with the image data when an application |
| calls the png_read_update_info() routine (see below). |
| |
| Data will be decoded into the supplied row buffers packed into bytes |
| unless the library has been told to transform it into another format. |
| For example, 4 bit/pixel paletted or grayscale data will be returned |
| 2 pixels/byte with the leftmost pixel in the high-order bits of the |
| byte, unless png_set_packing() is called. 8-bit RGB data will be stored |
| in RGBRGBRGB format unless png_set_filler() is called to insert filler |
| bytes, either before or after each RGB triplet. 16-bit RGB data will |
| be returned RRGGBBRRGGBB, with the most significant byte of the color |
| value first, unless png_set_strip_16() is called to transform it to |
| regular RGBRGB triplets. |
| |
| The following code transforms grayscale images of less than 8 to 8 bits, |
| changes paletted images to RGB, and adds a full alpha channel if there is |
| transparency information in a tRNS chunk. This is most useful on |
| grayscale images with bit depths of 2 or 4 or if there is a multiple-image |
| viewing application that wishes to treat all images in the same way. |
| |
| if (color_type == PNG_COLOR_TYPE_PALETTE && |
| bit_depth <= 8) png_set_expand(png_ptr); |
| |
| if (color_type == PNG_COLOR_TYPE_GRAY && |
| bit_depth < 8) png_set_expand(png_ptr); |
| |
| if (png_get_valid(png_ptr, info_ptr, |
| PNG_INFO_tRNS)) png_set_expand(png_ptr); |
| |
| PNG can have files with 16 bits per channel. If you only can handle |
| 8 bits per channel, this will strip the pixels down to 8 bit. |
| |
| if (bit_depth == 16) |
| png_set_strip_16(png_ptr); |
| |
| The png_set_background() function tells libpng to composite images |
| with alpha or simple transparency against the supplied background |
| color. If the PNG file contains a bKGD chunk (PNG_INFO_bKGD valid), |
| you may use this color, or supply another color more suitable for |
| the current display (e.g., the background color from a web page). You |
| need to tell libpng whether the color is in the gamma space of the |
| display (PNG_BACKGROUND_GAMMA_SCREEN for colors you supply), the file |
| (PNG_BACKGROUND_GAMMA_FILE for colors from the bKGD chunk), or one |
| that is neither of these gammas (PNG_BACKGROUND_GAMMA_UNIQUE - I don't |
| know why anyone would use this, but it's here). |
| |
| If, for some reason, you don't need the alpha channel on an image, |
| and you want to remove it rather than combining it with the background |
| (but the image author certainly had in mind that you *would* combine |
| it with the background, so that's what you should probably do): |
| |
| if (color_type & PNG_COLOR_MASK_ALPHA) |
| png_set_strip_alpha(png_ptr); |
| |
| PNG files pack pixels of bit depths 1, 2, and 4 into bytes as small as |
| they can, resulting in, for example, 8 pixels per byte for 1 bit |
| files. This code expands to 1 pixel per byte without changing the |
| values of the pixels: |
| |
| if (bit_depth < 8) |
| png_set_packing(png_ptr); |
| |
| PNG files have possible bit depths of 1, 2, 4, 8, and 16. All pixels |
| stored in a PNG image have been "scaled" or "shifted" up to the next |
| higher possible bit depth (e.g. from 5 bits/sample in the range [0,31] to |
| 8 bits/sample in the range [0, 255]). However, it is also possible to |
| convert the PNG pixel data back to the original bit depth of the image. |
| This call reduces the pixels back down to the original bit depth: |
| |
| png_color_16p sig_bit; |
| |
| if (png_get_sBIT(png_ptr, info_ptr, &sig_bit)) |
| png_set_shift(png_ptr, sig_bit); |
| |
| PNG files store 3-color pixels in red, green, blue order. This code |
| changes the storage of the pixels to blue, green, red: |
| |
| if (color_type == PNG_COLOR_TYPE_RGB || |
| color_type == PNG_COLOR_TYPE_RGB_ALPHA) |
| png_set_bgr(png_ptr); |
| |
| PNG files store RGB pixels packed into 3 bytes. This code expands them |
| into 4 bytes for windowing systems that need them in this format: |
| |
| if (bit_depth == 8 && color_type == |
| PNG_COLOR_TYPE_RGB) png_set_filler(png_ptr, |
| filler, PNG_FILLER_BEFORE); |
| |
| where "filler" is the number to fill with, and the location is |
| either PNG_FILLER_BEFORE or PNG_FILLER_AFTER, depending upon whether |
| you want the filler before the RGB or after. This transformation |
| does not affect images that already have full alpha channels. |
| |
| If you are reading an image with an alpha channel, and you need the |
| data as ARGB instead of the normal PNG format RGBA: |
| |
| if (color_type == PNG_COLOR_TYPE_RGB_ALPHA) |
| png_set_swap_alpha(png_ptr); |
| |
| For some uses, you may want a grayscale image to be represented as |
| RGB. This code will do that conversion: |
| |
| if (color_type == PNG_COLOR_TYPE_GRAY || |
| color_type == PNG_COLOR_TYPE_GRAY_ALPHA) |
| png_set_gray_to_rgb(png_ptr); |
| |
| If you have a grayscale and you are using png_set_expand() to change to |
| a higher bit-depth you must indicate if the supplied background gray |
| is supplied in the original file bit depth (need_expand = 1) or in the |
| expanded bit depth (need_expand = 0). Similarly, if you are reading |
| a paletted image, you must indicate if you have supplied the background |
| as a palette index that needs to be expanded (need_expand = 1). You can |
| also specify an RGB triplet that isn't in the palette when setting your |
| background for a paletted image. |
| |
| png_color_16 my_background; |
| png_color_16p image_background; |
| |
| if (png_get_bKGD(png_ptr, info_ptr, |
| &image_background)) |
| png_set_background(png_ptr, image_background), |
| PNG_BACKGROUND_GAMMA_FILE, 1, 1.0); |
| else |
| png_set_background(png_ptr, &my_background, |
| PNG_BACKGROUND_GAMMA_SCREEN, 0, 1.0); |
| |
| To properly display PNG images on any kind of system, the application needs |
| to know what the display gamma is. Ideally, the user will know this, and |
| the application will allow them to set it. One method of allowing the user |
| to set the display gamma separately for each system is to check for the |
| DISPLAY_GAMMA and VIEWING_GAMMA environment variables or for a SCREEN_GAMMA |
| environment variable, which will hopefully be correctly set. |
| |
| Note that display_gamma is the gamma of your display, while screen_gamma is |
| the overall gamma correction required to produce pleasing results, |
| which depends on the lighting conditions in the surrounding environment. |
| Screen_gamma is display_gamma/viewing_gamma, where viewing_gamma is |
| the amount of additional gamma correction needed to compensate for |
| a (viewing_gamma=1.25) environment. In a dim or brightly lit room, no |
| compensation other than the display_gamma is needed (viewing_gamma=1.0). |
| |
| if (/* We have a user-defined screen |
| gamma value */) |
| { |
| screen_gamma = user_defined_screen_gamma; |
| } |
| /* One way that applications can share the same |
| screen gamma value */ |
| else if ((gamma_str = getenv("SCREEN_GAMMA")) |
| != NULL) |
| { |
| screen_gamma = atof(gamma_str); |
| } |
| /* If we don't have another value */ |
| else |
| { |
| screen_gamma = 2.2; /* A good guess for a |
| PC monitor in a bright office or a dim room */ |
| screen_gamma = 2.0; /* A good guess for a |
| PC monitor in a dark room */ |
| screen_gamma = 1.7 or 1.0; /* A good |
| guess for Mac systems */ |
| } |
| |
| The png_set_gamma() function handles gamma transformations of the data. |
| Pass both the file gamma and the current screen_gamma. If the file does |
| not have a gamma value, you can pass one anyway if you have an idea what |
| it is (usually 0.50 is a good guess for GIF images on PCs). Note |
| that file gammas are inverted from screen gammas. See the discussions |
| on gamma in the PNG specification for an excellent description of what |
| gamma is, and why all applications should support it. It is strongly |
| recommended that PNG viewers support gamma correction. |
| |
| if (png_get_gAMA(png_ptr, info_ptr, &gamma)) |
| png_set_gamma(png_ptr, screen_gamma, gamma); |
| else |
| png_set_gamma(png_ptr, screen_gamma, 0.50); |
| |
| If you need to reduce an RGB file to a paletted file, or if a paletted |
| file has more entries then will fit on your screen, png_set_dither() |
| will do that. Note that this is a simple match dither that merely |
| finds the closest color available. This should work fairly well with |
| optimized palettes, and fairly badly with linear color cubes. If you |
| pass a palette that is larger then maximum_colors, the file will |
| reduce the number of colors in the palette so it will fit into |
| maximum_colors. If there is a histogram, it will use it to make |
| more intelligent choices when reducing the palette. If there is no |
| histogram, it may not do as good a job. |
| |
| if (color_type & PNG_COLOR_MASK_COLOR) |
| { |
| if (png_get_valid(png_ptr, info_ptr, |
| PNG_INFO_PLTE)) |
| { |
| png_color_16p histogram; |
| |
| png_get_hIST(png_ptr, info_ptr, |
| &histogram); |
| png_set_dither(png_ptr, palette, num_palette, |
| max_screen_colors, histogram, 1); |
| } |
| else |
| { |
| png_color std_color_cube[MAX_SCREEN_COLORS] = |
| { ... colors ... }; |
| |
| png_set_dither(png_ptr, std_color_cube, |
| MAX_SCREEN_COLORS, MAX_SCREEN_COLORS, |
| NULL,0); |
| } |
| } |
| |
| PNG files describe monochrome as black being zero and white being one. |
| The following code will reverse this (make black be one and white be |
| zero): |
| |
| if (bit_depth == 1 && color_type == PNG_COLOR_GRAY) |
| png_set_invert_mono(png_ptr); |
| |
| PNG files store 16 bit pixels in network byte order (big-endian, |
| ie. most significant bits first). This code changes the storage to the |
| other way (little-endian, i.e. least significant bits first, the |
| way PCs store them): |
| |
| if (bit_depth == 16) |
| png_set_swap(png_ptr); |
| |
| If you are using packed-pixel images (1, 2, or 4 bits/pixel), and you |
| need to change the order the pixels are packed into bytes, you can use: |
| |
| if (bit_depth < 8) |
| png_set_packswap(png_ptr); |
| |
| The last thing to handle is interlacing; this is covered in detail below, |
| but you must call the function here if you want libpng to handle expansion |
| of the interlaced image. |
| |
| number_of_passes = png_set_interlace_handling(png_ptr); |
| |
| After setting the transformations, libpng can update your png_info |
| structure to reflect any transformations you've requested with this |
| call. This is most useful to update the info structure's rowbytes |
| field so you can use it to allocate your image memory. This function |
| will also update your palette with the correct screen_gamma and |
| background if these have been given with the calls above. |
| |
| png_read_update_info(png_ptr, info_ptr); |
| |
| After you call png_read_update_info(), you can allocate any |
| memory you need to hold the image. The row data is simply |
| raw byte data for all forms of images. As the actual allocation |
| varies among applications, no example will be given. If you |
| are allocating one large chunk, you will need to build an |
| array of pointers to each row, as it will be needed for some |
| of the functions below. |
| |
| After you've allocated memory, you can read the image data. |
| The simplest way to do this is in one function call. If you are |
| allocating enough memory to hold the whole image, you can just |
| call png_read_image() and libpng will read in all the image data |
| and put it in the memory area supplied. You will need to pass in |
| an array of pointers to each row. |
| |
| This function automatically handles interlacing, so you don't need |
| to call png_set_interlace_handling() or call this function multiple |
| times, or any of that other stuff necessary with png_read_rows(). |
| |
| png_read_image(png_ptr, row_pointers); |
| |
| where row_pointers is: |
| |
| png_bytep row_pointers[height]; |
| |
| You can point to void or char or whatever you use for pixels. |
| |
| If you don't want to read in the whole image at once, you can |
| use png_read_rows() instead. If there is no interlacing (check |
| interlace_type == PNG_INTERLACE_NONE), this is simple: |
| |
| png_read_rows(png_ptr, row_pointers, NULL, |
| number_of_rows); |
| |
| where row_pointers is the same as in the png_read_image() call. |
| |
| If you are doing this just one row at a time, you can do this with |
| row_pointers: |
| |
| png_bytep row_pointers = row; |
| png_read_row(png_ptr, &row_pointers, NULL); |
| |
| If the file is interlaced (info_ptr->interlace_type != 0), things get |
| somewhat harder. The only current (PNG Specification version 1.0) |
| interlacing type for PNG is (interlace_type == PNG_INTERLACE_ADAM7) |
| is a somewhat complicated 2D interlace scheme, known as Adam7, that |
| breaks down an image into seven smaller images of varying size, based |
| on an 8x8 grid. |
| |
| libpng can fill out those images or it can give them to you "as is". |
| If you want them filled out, there are two ways to do that. The one |
| mentioned in the PNG specification is to expand each pixel to cover |
| those pixels that have not been read yet (the "rectangle" method). |
| This results in a blocky image for the first pass, which gradually |
| smooths out as more pixels are read. The other method is the "sparkle" |
| method, where pixels are drawn only in their final locations, with the |
| rest of the image remaining whatever colors they were initialized to |
| before the start of the read. The first method usually looks better, |
| but tends to be slower, as there are more pixels to put in the rows. |
| |
| If you don't want libpng to handle the interlacing details, just call |
| png_read_rows() seven times to read in all seven images. Each of the |
| images is a valid image by itself, or they can all be combined on an |
| 8x8 grid to form a single image (although if you intend to combine them |
| you would be far better off using the libpng interlace handling). |
| |
| The first pass will return an image 1/8 as wide as the entire image |
| (every 8th column starting in column 0) and 1/8 as high as the original |
| (every 8th row starting in row 0), the second will be 1/8 as wide |
| (starting in column 4) and 1/8 as high (also starting in row 0). The |
| third pass will be 1/4 as wide (every 4th pixel starting in column 0) and |
| 1/8 as high (every 8th row starting in row 4), and the fourth pass will |
| be 1/4 as wide and 1/4 as high (every 4th column starting in column 2, |
| and every 4th row starting in row 0). The fifth pass will return an |
| image 1/2 as wide, and 1/4 as high (starting at column 0 and row 2), |
| while the sixth pass will be 1/2 as wide and 1/2 as high as the original |
| (starting in column 1 and row 0). The seventh and final pass will be as |
| wide as the original, and 1/2 as high, containing all of the odd |
| numbered scanlines. Phew! |
| |
| If you want libpng to expand the images, call this before calling |
| png_start_read_image() or png_read_update_info(): |
| |
| if (interlace_type == PNG_INTERLACE_ADAM7) |
| number_of_passes |
| = png_set_interlace_handling(png_ptr); |
| |
| This will return the number of passes needed. Currently, this |
| is seven, but may change if another interlace type is added. |
| This function can be called even if the file is not interlaced, |
| where it will return one pass. |
| |
| If you are not going to display the image after each pass, but are |
| going to wait until the entire image is read in, use the sparkle |
| effect. This effect is faster and the end result of either method |
| is exactly the same. If you are planning on displaying the image |
| after each pass, the "rectangle" effect is generally considered the |
| better looking one. |
| |
| If you only want the "sparkle" effect, just call png_read_rows() as |
| normal, with the third parameter NULL. Make sure you make pass over |
| the image number_of_passes times, and you don't change the data in the |
| rows between calls. You can change the locations of the data, just |
| not the data. Each pass only writes the pixels appropriate for that |
| pass, and assumes the data from previous passes is still valid. |
| |
| png_read_rows(png_ptr, row_pointers, NULL, |
| number_of_rows); |
| |
| If you only want the first effect (the rectangles), do the same as |
| before except pass the row buffer in the third parameter, and leave |
| the second parameter NULL. |
| |
| png_read_rows(png_ptr, NULL, row_pointers, |
| number_of_rows); |
| |
| After you are finished reading the image, you can finish reading |
| the file. If you are interested in comments or time, which may be |
| stored either before or after the image data, you should pass the |
| separate png_info struct if you want to keep the comments from |
| before and after the image separate. If you are not interested, you |
| can pass NULL. |
| |
| png_read_end(png_ptr, end_info); |
| |
| When you are done, you can free all memory allocated by libpng like this: |
| |
| png_destroy_read_struct(&png_ptr, &info_ptr, |
| &end_info); |
| |
| For a more compact example of reading a PNG image, see the file example.c. |
| |
| |
| Reading PNG files progressively: |
| |
| The progressive reader is slightly different then the non-progressive |
| reader. Instead of calling png_read_info(), png_read_rows(), and |
| png_read_end(), you make one call to png_process_data(), which calls |
| callbacks when it has the info, a row, or the end of the image. You |
| set up these callbacks with png_set_progressive_read_fn(). You don't |
| have to worry about the input/output functions of libpng, as you are |
| giving the library the data directly in png_process_data(). I will |
| assume that you have read the section on reading PNG files above, |
| so I will only highlight the differences (although I will show |
| all of the code). |
| |
| png_structp png_ptr; |
| png_infop info_ptr; |
| |
| /* An example code fragment of how you would |
| initialize the progressive reader in your |
| application. */ |
| int |
| initialize_png_reader() |
| { |
| png_ptr = png_create_read_struct |
| (PNG_LIBPNG_VER_STRING, (void *)user_error_ptr, |
| user_error_fn, user_warning_fn); |
| if (!png_ptr) |
| return -1; |
| info_ptr = png_create_info_struct(png_ptr); |
| if (!info_ptr) |
| { |
| png_destroy_read_struct(&png_ptr, (png_infopp)NULL, |
| (png_infopp)NULL); |
| return -1; |
| } |
| |
| if (setjmp(png_ptr->jmpbuf)) |
| { |
| png_destroy_read_struct(&png_ptr, &info_ptr, |
| (png_infopp)NULL); |
| return -1; |
| } |
| |
| /* This one's new. You can provide functions |
| to be called when the header info is valid, |
| when each row is completed, and when the image |
| is finished. If you aren't using all functions, |
| you can specify a NULL parameter. You can use |
| any struct as the user_ptr (cast to a void pointer |
| for the function call), and retrieve the pointer |
| from inside the callbacks using the function |
| |
| png_get_progressive_ptr(png_ptr); |
| |
| which will return a void pointer, which you have |
| to cast appropriately. |
| */ |
| png_set_progressive_read_fn(png_ptr, (void *)user_ptr, |
| info_callback, row_callback, end_callback); |
| |
| return 0; |
| } |
| |
| /* A code fragment that you call as you receive blocks |
| of data */ |
| int |
| process_data(png_bytep buffer, png_uint_32 length) |
| { |
| if (setjmp(png_ptr->jmpbuf)) |
| { |
| png_destroy_read_struct(&png_ptr, &info_ptr, |
| (png_infopp)NULL); |
| return -1; |
| } |
| |
| /* This one's new also. Simply give it a chunk |
| of data from the file stream (in order, of |
| course). On machines with segmented memory |
| models machines, don't give it any more than |
| 64K. The library seems to run fine with sizes |
| of 4K. Although you can give it much less if |
| necessary (I assume you can give it chunks of |
| 1 byte, I haven't tried less then 256 bytes |
| yet). When this function returns, you may |
| want to display any rows that were generated |
| in the row callback if you don't already do |
| so there. |
| */ |
| png_process_data(png_ptr, info_ptr, buffer, length); |
| return 0; |
| } |
| |
| /* This function is called (as set by |
| png_set_progressive_fn() above) when enough data |
| has been supplied so all of the header has been |
| read. |
| */ |
| void |
| info_callback(png_structp png_ptr, png_infop info) |
| { |
| /* Do any setup here, including setting any of |
| the transformations mentioned in the Reading |
| PNG files section. For now, you _must_ call |
| either png_start_read_image() or |
| png_read_update_info() after all the |
| transformations are set (even if you don't set |
| any). You may start getting rows before |
| png_process_data() returns, so this is your |
| last chance to prepare for that. |
| */ |
| } |
| |
| /* This function is called when each row of image |
| data is complete */ |
| void |
| row_callback(png_structp png_ptr, png_bytep new_row, |
| png_uint_32 row_num, int pass) |
| { |
| /* If the image is interlaced, and you turned |
| on the interlace handler, this function will |
| be called for every row in every pass. Some |
| of these rows will not be changed from the |
| previous pass. When the row is not changed, |
| the new_row variable will be NULL. The rows |
| and passes are called in order, so you don't |
| really need the row_num and pass, but I'm |
| supplying them because it may make your life |
| easier. |
| |
| For the non-NULL rows of interlaced images, |
| you must call png_progressive_combine_row() |
| passing in the row and the old row. You can |
| call this function for NULL rows (it will just |
| return) and for non-interlaced images (it just |
| does the memcpy for you) if it will make the |
| code easier. Thus, you can just do this for |
| all cases: |
| */ |
| |
| png_progressive_combine_row(png_ptr, old_row, |
| new_row); |
| |
| /* where old_row is what was displayed for |
| previous rows. Note that the first pass |
| (pass == 0, really) will completely cover |
| the old row, so the rows do not have to be |
| initialized. After the first pass (and only |
| for interlaced images), you will have to pass |
| the current row, and the function will combine |
| the old row and the new row. |
| */ |
| } |
| |
| void |
| end_callback(png_structp png_ptr, png_infop info) |
| { |
| /* This function is called after the whole image |
| has been read, including any chunks after the |
| image (up to and including the IEND). You |
| will usually have the same info chunk as you |
| had in the header, although some data may have |
| been added to the comments and time fields. |
| |
| Most people won't do much here, perhaps setting |
| a flag that marks the image as finished. |
| */ |
| } |
| |
| |
| |
| IV. Writing |
| |
| Much of this is very similar to reading. However, everything of |
| importance is repeated here, so you won't have to constantly look |
| back up in the reading section to understand writing. |
| |
| You will want to do the I/O initialization before you get into libpng, |
| so if it doesn't work, you don't have anything to undo. If you are not |
| using the standard I/O functions, you will need to replace them with |
| custom writing functions. See the discussion under Customizing libpng. |
| |
| FILE *fp = fopen(file_name, "wb"); |
| if (!fp) |
| { |
| return; |
| } |
| |
| Next, png_struct and png_info need to be allocated and initialized. |
| As these can be both relatively large, you may not want to store these |
| on the stack, unless you have stack space to spare. Of course, you |
| will want to check if they return NULL. If you are also reading, |
| you won't want to name your read structure and your write structure |
| both "png_ptr"; you can call them anything you like, such as |
| "read_ptr" and "write_ptr". Look at pngtest.c, for example. |
| |
| png_structp png_ptr = png_create_write_struct |
| (PNG_LIBPNG_VER_STRING, (void *)user_error_ptr, |
| user_error_fn, user_warning_fn); |
| if (!png_ptr) |
| return; |
| |
| png_infop info_ptr = png_create_info_struct(png_ptr); |
| if (!info_ptr) |
| { |
| png_destroy_write_struct(&png_ptr, |
| (png_infopp)NULL); |
| return; |
| } |
| |
| After you have these structures, you will need to set up the |
| error handling. When libpng encounters an error, it expects to |
| longjmp() back to your routine. Therefore, you will need to call |
| setjmp and pass the jmpbuf field of your png_struct. If you |
| write the file from different routines, you will need to update |
| the jmpbuf field every time you enter a new routine that will |
| call a png_ function. See your documentation of setjmp/longjmp |
| for your compiler for more information on setjmp/longjmp. See |
| the discussion on libpng error handling in the Customizing Libpng |
| section below for more information on the libpng error handling. |
| |
| if (setjmp(png_ptr->jmpbuf)) |
| { |
| png_destroy_write_struct(&png_ptr, &info_ptr); |
| fclose(fp); |
| return; |
| } |
| |
| Now you need to set up the output code. The default for libpng is to |
| use the C function fwrite(). If you use this, you will need to pass a |
| valid FILE * in the function png_init_io(). Be sure that the file is |
| opened in binary mode. Again, if you wish to handle writing data in |
| another way, see the discussion on libpng I/O handling in the Customizing |
| Libpng section below. |
| |
| png_init_io(png_ptr, fp); |
| |
| At this point, you can set up a callback function that will be |
| called after each row has been written, which you can use to control |
| a progress meter or the like. It's demonstrated in pngtest.c. |
| You must supply a function |
| |
| void write_row_callback(png_ptr, png_uint_32 row, int pass); |
| { |
| /* put your code here */ |
| } |
| |
| (You can give it another name that you like instead of "write_row_callback") |
| |
| To inform libpng about your function, use |
| |
| png_set_write_status_fn(png_ptr, write_row_callback); |
| |
| You now have the option of modifying how the compression library will |
| run. The following functions are mainly for testing, but may be useful |
| in some cases, like if you need to write PNG files extremely fast and |
| are willing to give up some compression, or if you want to get the |
| maximum possible compression at the expense of slower writing. If you |
| have no special needs in this area, let the library do what it wants by |
| not calling this function at all, as it has been tuned to deliver a good |
| speed/compression ratio. The second parameter to png_set_filter() is |
| the filter method, for which the only valid value is '0' (as of the |
| October 1996 PNG specification, version 1.0). The third parameter is a |
| flag that indicates |
| which filter type(s) are to be tested for each scanline. See the |
| Compression Library for details on the specific filter types. |
| |
| |
| /* turn on or off filtering, and/or choose |
| specific filters */ |
| png_set_filter(png_ptr, 0, |
| PNG_FILTER_NONE | PNG_FILTER_SUB | |
| PNG_FILTER_PAETH); |
| |
| The png_set_compression_???() functions interface to the zlib compression |
| library, and should mostly be ignored unless you really know what you are |
| doing. The only generally useful call is png_set_compression_level() |
| which changes how much time zlib spends on trying to compress the image |
| data. See the Compression Library for details on the compression levels. |
| |
| /* set the zlib compression level */ |
| png_set_compression_level(png_ptr, |
| Z_BEST_COMPRESSION); |
| |
| /* set other zlib parameters */ |
| png_set_compression_mem_level(png_ptr, 8); |
| png_set_compression_strategy(png_ptr, |
| Z_DEFAULT_STRATEGY); |
| png_set_compression_window_bits(png_ptr, 15); |
| png_set_compression_method(png_ptr, 8); |
| |
| You now need to fill in the png_info structure with all the data you |
| wish to write before the actual image. Note that the only thing you |
| are allowed to write after the image is the text chunks and the time |
| chunk (as of PNG Specification 1.0, anyway). See png_write_end() and |
| the latest PNG specification for more information on that. If you |
| wish to write them before the image, fill them in now, and flag that |
| data as being valid. If you want to wait until after the data, don't |
| fill them until png_write_end(). For all the fields in png_info and |
| their data types, see png.h. For explanations of what the fields |
| contain, see the PNG specification. |
| |
| Some of the more important parts of the png_info are: |
| |
| png_set_IHDR(png_ptr, info_ptr, width, height, |
| bit_depth, color_type, interlace_type, |
| compression_type, filter_type) |
| width - holds the width of the image |
| in pixels (up to 2^31). |
| height - holds the height of the image |
| in pixels (up to 2^31). |
| bit_depth - holds the bit depth of one of the |
| image channels. |
| (valid values are 1, 2, 4, 8, 16 |
| and depend also on the |
| color_type. See also significant |
| bits (sBIT) below). |
| color_type - describes which color/alpha |
| channels are present. |
| PNG_COLOR_TYPE_GRAY |
| (bit depths 1, 2, 4, 8, 16) |
| PNG_COLOR_TYPE_GRAY_ALPHA |
| (bit depths 8, 16) |
| PNG_COLOR_TYPE_PALETTE |
| (bit depths 1, 2, 4, 8) |
| PNG_COLOR_TYPE_RGB |
| (bit_depths 8, 16) |
| PNG_COLOR_TYPE_RGB_ALPHA |
| (bit_depths 8, 16) |
| |
| PNG_COLOR_MASK_PALETTE |
| PNG_COLOR_MASK_COLOR |
| PNG_COLOR_MASK_ALPHA |
| |
| interlace_type - PNG_INTERLACE_NONE or |
| PNG_INTERLACE_ADAM7 |
| compression_type - (must be |
| PNG_COMPRESSION_TYPE_DEFAULT) |
| filter_type - (must be PNG_FILTER_TYPE_DEFAULT) |
| |
| png_set_PLTE(png_ptr, info_ptr, palette, |
| num_palette); |
| palette - the palette for the file |
| (array of png_color) |
| num_palette - number of entries in the palette |
| |
| png_set_gAMA(png_ptr, info_ptr, gamma); |
| gamma - the gamma the image was created |
| at (PNG_INFO_gAMA) |
| |
| png_set_sRGB(png_ptr, info_ptr, srgb_intent); |
| srgb_intent - the rendering intent |
| (PNG_INFO_sRGB) The presence of |
| the sRGB chunk means that the pixel |
| data is in the sRGB color space. |
| This chunk also implies specific |
| values of gAMA and cHRM. Rendering |
| intent is the CSS-1 property that |
| has been defined by the International |
| Color Consortium |
| (http://www.color.org). |
| It can be one of |
| PNG_SRGB_INTENT_SATURATION, |
| PNG_SRGB_INTENT_PERCEPTUAL, |
| PNG_SRGB_INTENT_ABSOLUTE, or |
| PNG_SRGB_INTENT_RELATIVE. |
| |
| |
| png_set_sRGB_gAMA_and_cHRM(png_ptr, info_ptr, |
| srgb_intent); |
| srgb_intent - the rendering intent |
| (PNG_INFO_sRGB) The presence of the |
| sRGB chunk means that the pixel |
| data is in the sRGB color space. |
| This function also causes gAMA and |
| cHRM chunks with the specific values |
| that are consistent with sRGB to be |
| written. |
| |
| png_set_sBIT(png_ptr, info_ptr, sig_bit); |
| sig_bit - the number of significant bits for |
| (PNG_INFO_sBIT) each of the gray, red, |
| green, and blue channels, whichever are |
| appropriate for the given color type |
| (png_color_16) |
| |
| png_set_tRNS(png_ptr, info_ptr, trans, num_trans, |
| trans_values); |
| trans - array of transparent entries for |
| palette (PNG_INFO_tRNS) |
| trans_values - transparent pixel for non-paletted |
| images (PNG_INFO_tRNS) |
| num_trans - number of transparent entries |
| (PNG_INFO_tRNS) |
| |
| png_set_hIST(png_ptr, info_ptr, hist); |
| (PNG_INFO_hIST) |
| hist - histogram of palette (array of |
| png_color_16) |
| |
| png_set_tIME(png_ptr, info_ptr, mod_time); |
| mod_time - time image was last modified |
| (PNG_VALID_tIME) |
| |
| png_set_bKGD(png_ptr, info_ptr, background); |
| background - background color (PNG_VALID_bKGD) |
| |
| png_set_text(png_ptr, info_ptr, text_ptr, num_text); |
| text_ptr - array of png_text holding image |
| comments |
| text_ptr[i]->key - keyword for comment. |
| text_ptr[i]->text - text comments for current |
| keyword. |
| text_ptr[i]->compression - type of compression used |
| on "text" PNG_TEXT_COMPRESSION_NONE or |
| PNG_TEXT_COMPRESSION_zTXt |
| num_text - number of comments in text_ptr |
| |
| png_set_oFFs(png_ptr, info_ptr, offset_x, offset_y, |
| unit_type); |
| offset_x - positive offset from the left |
| edge of the screen |
| offset_y - positive offset from the top |
| edge of the screen |
| unit_type - PNG_OFFSET_PIXEL, PNG_OFFSET_MICROMETER |
| |
| png_set_pHYs(png_ptr, info_ptr, res_x, res_y, |
| unit_type); |
| res_x - pixels/unit physical resolution |
| in x direction |
| res_y - pixels/unit physical resolution |
| in y direction |
| unit_type - PNG_RESOLUTION_UNKNOWN, |
| PNG_RESOLUTION_METER |
| |
| In PNG files, the alpha channel in an image is the level of opacity. |
| If your data is supplied as a level of transparency, you can invert the |
| alpha channel before you write it, so that 0 is fully transparent and 255 |
| (in 8-bit or paletted images) or 65535 (in 16-bit images) is fully opaque, |
| with |
| |
| png_set_invert_alpha(png_ptr); |
| |
| This must appear here instead of later with the other transformations |
| because in the case of paletted images the tRNS chunk data has to |
| be inverted before the tRNS chunk is written. If your image is not a |
| paletted image, the tRNS data (which in such cases represents a single |
| color to be rendered as transparent) won't be changed. |
| |
| A quick word about text and num_text. text is an array of png_text |
| structures. num_text is the number of valid structures in the array. |
| If you want, you can use max_text to hold the size of the array, but |
| libpng ignores it for writing (it does use it for reading). Each |
| png_text structure holds a keyword-text value, and a compression type. |
| The compression types have the same valid numbers as the compression |
| types of the image data. Currently, the only valid number is zero. |
| However, you can store text either compressed or uncompressed, unlike |
| images which always have to be compressed. So if you don't want the |
| text compressed, set the compression type to PNG_TEXT_COMPRESSION_NONE. |
| Until text gets around 1000 bytes, it is not worth compressing it. |
| After the text has been written out to the file, the compression type |
| is set to PNG_TEXT_COMPRESSION_NONE_WR or PNG_TEXT_COMPRESSION_zTXt_WR, |
| so that it isn't written out again at the end (in case you are calling |
| png_write_end() with the same struct. |
| |
| The keywords that are given in the PNG Specification are: |
| |
| Title Short (one line) title or |
| caption for image |
| Author Name of image's creator |
| Description Description of image (possibly long) |
| Copyright Copyright notice |
| Creation Time Time of original image creation |
| (usually RFC 1123 format, see below) |
| Software Software used to create the image |
| Disclaimer Legal disclaimer |
| Warning Warning of nature of content |
| Source Device used to create the image |
| Comment Miscellaneous comment; conversion |
| from other image format |
| |
| The keyword-text pairs work like this. Keywords should be short |
| simple descriptions of what the comment is about. Some typical |
| keywords are found in the PNG specification, as is some recommendations |
| on keywords. You can repeat keywords in a file. You can even write |
| some text before the image and some after. For example, you may want |
| to put a description of the image before the image, but leave the |
| disclaimer until after, so viewers working over modem connections |
| don't have to wait for the disclaimer to go over the modem before |
| they start seeing the image. Finally, keywords should be full |
| words, not abbreviations. Keywords and text are in the ISO 8859-1 |
| (Latin-1) character set (a superset of regular ASCII) and can not |
| contain NUL characters, and should not contain control or other |
| unprintable characters. To make the comments widely readable, stick |
| with basic ASCII, and avoid machine specific character set extensions |
| like the IBM-PC character set. The keyword must be present, but |
| you can leave off the text string on non-compressed pairs. |
| Compressed pairs must have a text string, as only the text string |
| is compressed anyway, so the compression would be meaningless. |
| |
| PNG supports modification time via the png_time structure. Two |
| conversion routines are proved, png_convert_from_time_t() for |
| time_t and png_convert_from_struct_tm() for struct tm. The |
| time_t routine uses gmtime(). You don't have to use either of |
| these, but if you wish to fill in the png_time structure directly, |
| you should provide the time in universal time (GMT) if possible |
| instead of your local time. Note that the year number is the full |
| year (e.g. 1998, rather than 98 - PNG is year 2000 compliant!), and |
| that months start with 1. |
| |
| If you want to store the time of the original image creation, you should |
| use a plain tEXt chunk with the "Creation Time" keyword. This is |
| necessary because the "creation time" of a PNG image is somewhat vague, |
| depending on whether you mean the PNG file, the time the image was |
| created in a non-PNG format, a still photo from which the image was |
| scanned, or possibly the subject matter itself. In order to facilitate |
| machine-readable dates, it is recommended that the "Creation Time" |
| tEXt chunk use RFC 1123 format dates (e.g. 22 May 1997 18:07:10 GMT"), |
| although this isn't a requirement. Unlike the tIME chunk, the |
| "Creation Time" tEXt chunk is not expected to be automatically changed |
| by the software. To facilitate the use of RFC 1123 dates, a function |
| png_convert_to_rfc1123(png_timep) is provided to convert from PNG |
| time to an RFC 1123 format string. |
| |
| You are now ready to write all the file information up to the actual |
| image data. You do this with a call to png_write_info(). |
| |
| png_write_info(png_ptr, info_ptr); |
| |
| After you've written the file information, you can set up the library |
| to handle any special transformations of the image data. The various |
| ways to transform the data will be described in the order that they |
| should occur. This is important, as some of these change the color |
| type and/or bit depth of the data, and some others only work on |
| certain color types and bit depths. Even though each transformation |
| checks to see if it has data that it can do something with, you should |
| make sure to only enable a transformation if it will be valid for the |
| data. For example, don't swap red and blue on grayscale data. |
| |
| PNG files store RGB pixels packed into 3 bytes. This code tells |
| the library to expect input data with 4 bytes per pixel |
| |
| png_set_filler(png_ptr, 0, PNG_FILLER_BEFORE); |
| |
| where the 0 is the value that will be put in the 4th byte, and the |
| location is either PNG_FILLER_BEFORE or PNG_FILLER_AFTER, depending |
| upon whether the filler byte is stored XRGB or RGBX. |
| |
| PNG files pack pixels of bit depths 1, 2, and 4 into bytes as small as |
| they can, resulting in, for example, 8 pixels per byte for 1 bit files. |
| If the data is supplied at 1 pixel per byte, use this code, which will |
| correctly pack the pixels into a single byte: |
| |
| png_set_packing(png_ptr); |
| |
| PNG files reduce possible bit depths to 1, 2, 4, 8, and 16. If your |
| data is of another bit depth, you can write an sBIT chunk into the |
| file so that decoders can get the original data if desired. |
| |
| /* Set the true bit depth of the image data */ |
| if (color_type & PNG_COLOR_MASK_COLOR) |
| { |
| sig_bit.red = true_bit_depth; |
| sig_bit.green = true_bit_depth; |
| sig_bit.blue = true_bit_depth; |
| } |
| else |
| { |
| sig_bit.gray = true_bit_depth; |
| } |
| if (color_type & PNG_COLOR_MASK_ALPHA) |
| { |
| sig_bit.alpha = true_bit_depth; |
| } |
| |
| png_set_sBIT(png_ptr, info_ptr, &sig_bit); |
| |
| If the data is stored in the row buffer in a bit depth other than |
| one supported by PNG (e.g. 3 bit data in the range 0-7 for a 4-bit PNG), |
| this will scale the values to appear to be the correct bit depth as |
| is required by PNG. |
| |
| png_set_shift(png_ptr, &sig_bit); |
| |
| PNG files store 16 bit pixels in network byte order (big-endian, |
| ie. most significant bits first). This code would be used if they are |
| supplied the other way (little-endian, i.e. least significant bits |
| first, the way PCs store them): |
| |
| if (bit_depth > 8) |
| png_set_swap(png_ptr); |
| |
| If you are using packed-pixel images (1, 2, or 4 bits/pixel), and you |
| need to change the order the pixels are packed into bytes, you can use: |
| |
| if (bit_depth < 8) |
| png_set_packswap(png_ptr); |
| |
| PNG files store 3 color pixels in red, green, blue order. This code |
| would be used if they are supplied as blue, green, red: |
| |
| png_set_bgr(png_ptr); |
| |
| PNG files describe monochrome as black being zero and white being |
| one. This code would be used if the pixels are supplied with this reversed |
| (black being one and white being zero): |
| |
| png_set_invert_mono(png_ptr); |
| |
| Finally, you can write your own transformation function if none of |
| the existing ones meets your needs. This is done by setting a callback |
| with |
| |
| png_set_write_user_transform_fn(png_ptr, |
| write_transform_fn); |
| |
| You must supply the function |
| |
| void write_transform_fn(png_ptr ptr, row_info_ptr |
| row_info, png_bytep data) |
| |
| See pngtest.c for a working example. Your function will be called |
| before any of the other transformations have been processed. |
| |
| It is possible to have libpng flush any pending output, either manually, |
| or automatically after a certain number of lines have been written. To |
| flush the output stream a single time call: |
| |
| png_write_flush(png_ptr); |
| |
| and to have libpng flush the output stream periodically after a certain |
| number of scanlines have been written, call: |
| |
| png_set_flush(png_ptr, nrows); |
| |
| Note that the distance between rows is from the last time png_write_flush() |
| was called, or the first row of the image if it has never been called. |
| So if you write 50 lines, and then png_set_flush 25, it will flush the |
| output on the next scanline, and every 25 lines thereafter, unless |
| png_write_flush() is called before 25 more lines have been written. |
| If nrows is too small (less than about 10 lines for a 640 pixel wide |
| RGB image) the image compression may decrease noticeably (although this |
| may be acceptable for real-time applications). Infrequent flushing will |
| only degrade the compression performance by a few percent over images |
| that do not use flushing. |
| |
| That's it for the transformations. Now you can write the image data. |
| The simplest way to do this is in one function call. If have the |
| whole image in memory, you can just call png_write_image() and libpng |
| will write the image. You will need to pass in an array of pointers to |
| each row. This function automatically handles interlacing, so you don't |
| need to call png_set_interlace_handling() or call this function multiple |
| times, or any of that other stuff necessary with png_write_rows(). |
| |
| png_write_image(png_ptr, row_pointers); |
| |
| where row_pointers is: |
| |
| png_bytef *row_pointers[height]; |
| |
| You can point to void or char or whatever you use for pixels. |
| |
| If you can't want to write the whole image at once, you can |
| use png_write_rows() instead. If the file is not interlaced, |
| this is simple: |
| |
| png_write_rows(png_ptr, row_pointers, |
| number_of_rows); |
| |
| row_pointers is the same as in the png_write_image() call. |
| |
| If you are just writing one row at a time, you can do this with |
| row_pointers: |
| |
| png_bytep row_pointer = row; |
| |
| png_write_row(png_ptr, &row_pointer); |
| |
| When the file is interlaced, things can get a good deal more |
| complicated. The only currently (as of February 1998 -- PNG Specification |
| version 1.0, dated October 1996) defined interlacing scheme for PNG files |
| is the "Adam7" interlace scheme, that breaks down an |
| image into seven smaller images of varying size. libpng will build |
| these images for you, or you can do them yourself. If you want to |
| build them yourself, see the PNG specification for details of which |
| pixels to write when. |
| |
| If you don't want libpng to handle the interlacing details, just |
| use png_set_interlace_handling() and call png_write_rows() the |
| correct number of times to write all seven sub-images. |
| |
| If you want libpng to build the sub-images, call this before you start |
| writing any rows: |
| |
| number_of_passes = |
| png_set_interlace_handling(png_ptr); |
| |
| This will return the number of passes needed. Currently, this |
| is seven, but may change if another interlace type is added. |
| |
| Then write the complete image number_of_passes times. |
| |
| png_write_rows(png_ptr, row_pointers, |
| number_of_rows); |
| |
| As some of these rows are not used, and thus return immediately, |
| you may want to read about interlacing in the PNG specification, |
| and only update the rows that are actually used. |
| |
| After you are finished writing the image, you should finish writing |
| the file. If you are interested in writing comments or time, you should |
| pass an appropriately filled png_info pointer. If you are not interested, |
| you can pass NULL. |
| |
| png_write_end(png_ptr, info_ptr); |
| |
| When you are done, you can free all memory used by libpng like this: |
| |
| png_destroy_write_struct(&png_ptr, &info_ptr); |
| |
| You must free any data you allocated for info_ptr, such as comments, |
| palette, or histogram, before the call to png_destroy_write_struct(); |
| |
| For a more compact example of writing a PNG image, see the file example.c. |
| |
| |
| V. Modifying/Customizing libpng: |
| |
| There are two issues here. The first is changing how libpng does |
| standard things like memory allocation, input/output, and error handling. |
| The second deals with more complicated things like adding new chunks, |
| adding new transformations, and generally changing how libpng works. |
| |
| All of the memory allocation, input/output, and error handling in libpng |
| goes through callbacks which are user settable. The default routines are |
| in pngmem.c, pngrio.c, pngwio.c, and pngerror.c respectively. To change |
| these functions, call the appropriate png_set_???_fn() function. |
| |
| Memory allocation is done through the functions png_large_malloc(), |
| png_malloc(), png_realloc(), png_large_free(), and png_free(). These |
| currently just call the standard C functions. The large functions must |
| handle exactly 64K, but they don't have to handle more than that. If |
| your pointers can't access more then 64K at a time, you will want to set |
| MAXSEG_64K in zlib.h. Since it is unlikely that the method of handling |
| memory allocation on a platform will change between applications, these |
| functions must be modified in the library at compile time. |
| |
| Input/Output in libpng is done through png_read() and png_write(), |
| which currently just call fread() and fwrite(). The FILE * is stored in |
| png_struct and is initialized via png_init_io(). If you wish to change |
| the method of I/O, the library supplies callbacks that you can set |
| through the function png_set_read_fn() and png_set_write_fn() at run |
| time, instead of calling the png_init_io() function. These functions |
| also provide a void pointer that can be retrieved via the function |
| png_get_io_ptr(). For example: |
| |
| png_set_read_fn(png_structp png_ptr, |
| voidp io_ptr, png_rw_ptr read_data_fn) |
| |
| png_set_write_fn(png_structp png_ptr, |
| voidp io_ptr, png_rw_ptr write_data_fn, |
| png_flush_ptr output_flush_fn); |
| |
| voidp io_ptr = png_get_io_ptr(png_ptr); |
| |
| The replacement I/O functions should have prototypes as follows: |
| |
| void user_read_data(png_structp png_ptr, |
| png_bytep data, png_uint_32 length); |
| void user_write_data(png_structp png_ptr, |
| png_bytep data, png_uint_32 length); |
| void user_flush_data(png_structp png_ptr); |
| |
| Supplying NULL for the read, write, or flush functions sets them back |
| to using the default C stream functions. It is an error to read from |
| a write stream, and vice versa. |
| |
| Error handling in libpng is done through png_error() and png_warning(). |
| Errors handled through png_error() are fatal, meaning that png_error() |
| should never return to its caller. Currently, this is handled via |
| setjmp() and longjmp(), but you could change this to do things like |
| exit() if you should wish. On non-fatal errors, png_warning() is called |
| to print a warning message, and then control returns to the calling code. |
| By default png_error() and png_warning() print a message on stderr via |
| fprintf() unless the library is compiled with PNG_NO_STDIO defined. If |
| you wish to change the behavior of the error functions, you will need to |
| set up your own message callbacks. These functions are normally supplied |
| at the time that the png_struct is created. It is also possible to change |
| these functions after png_create_???_struct() has been called by calling: |
| |
| png_set_error_fn(png_structp png_ptr, |
| png_voidp error_ptr, png_error_ptr error_fn, |
| png_error_ptr warning_fn); |
| |
| png_voidp error_ptr = png_get_error_ptr(png_ptr); |
| |
| If NULL is supplied for either error_fn or warning_fn, then the libpng |
| default function will be used, calling fprintf() and/or longjmp() if a |
| problem is encountered. The replacement error functions should have |
| parameters as follows: |
| |
| void user_error_fn(png_structp png_ptr, |
| png_const_charp error_msg); |
| void user_warning_fn(png_structp png_ptr, |
| png_const_charp warning_msg); |
| |
| The motivation behind using setjmp() and longjmp() is the C++ throw and |
| catch exception handling methods. This makes the code much easier to write, |
| as there is no need to check every return code of every function call. |
| However, there are some uncertainties about the status of local variables |
| after a longjmp, so the user may want to be careful about doing anything after |
| setjmp returns non-zero besides returning itself. Consult your compiler |
| documentation for more details. |
| |
| If you need to read or write custom chunks, you will need to get deeper |
| into the libpng code, as a mechanism has not yet been supplied for user |
| callbacks with custom chunks. First, read the PNG specification, and have |
| a first level of understanding of how it works. Pay particular attention |
| to the sections that describe chunk names, and look at how other chunks |
| were designed, so you can do things similarly. Second, check out the |
| sections of libpng that read and write chunks. Try to find a chunk that |
| is similar to yours and copy off of it. More details can be found in the |
| comments inside the code. A way of handling unknown chunks in a generic |
| method, potentially via callback functions, would be best. |
| |
| If you wish to write your own transformation for the data, look through |
| the part of the code that does the transformations, and check out some of |
| the simpler ones to get an idea of how they work. Try to find a similar |
| transformation to the one you want to add and copy off of it. More details |
| can be found in the comments inside the code itself. |
| |
| Configuring for 16 bit platforms: |
| |
| You may need to change the png_large_malloc() and png_large_free() |
| routines in pngmem.c, as these are required to allocate 64K, although |
| there is already support for many of the common DOS compilers. Also, |
| you will want to look into zconf.h to tell zlib (and thus libpng) that |
| it cannot allocate more then 64K at a time. Even if you can, the memory |
| won't be accessible. So limit zlib and libpng to 64K by defining MAXSEG_64K. |
| |
| Configuring for DOS: |
| |
| For DOS users which only have access to the lower 640K, you will |
| have to limit zlib's memory usage via a png_set_compression_mem_level() |
| call. See zlib.h or zconf.h in the zlib library for more information. |
| |
| Configuring for Medium Model: |
| |
| Libpng's support for medium model has been tested on most of the popular |
| compilers. Make sure MAXSEG_64K gets defined, USE_FAR_KEYWORD gets |
| defined, and FAR gets defined to far in pngconf.h, and you should be |
| all set. Everything in the library (except for zlib's structure) is |
| expecting far data. You must use the typedefs with the p or pp on |
| the end for pointers (or at least look at them and be careful). Make |
| note that the row's of data are defined as png_bytepp which is a |
| unsigned char far * far *. |
| |
| Configuring for gui/windowing platforms: |
| |
| You will need to write new error and warning functions that use the GUI |
| interface, as described previously, and set them to be the error and |
| warning functions at the time that png_create_???_struct() is called, |
| in order to have them available during the structure initialization. |
| They can be changed later via png_set_error_fn(). On some compilers, |
| you may also have to change the memory allocators (png_malloc, etc.). |
| |
| Configuring for compiler xxx: |
| |
| All includes for libpng are in pngconf.h. If you need to add/change/delete |
| an include, this is the place to do it. The includes that are not |
| needed outside libpng are protected by the PNG_INTERNAL definition, |
| which is only defined for those routines inside libpng itself. The |
| files in libpng proper only include png.h, which includes pngconf.h. |
| |
| Configuring zlib: |
| |
| There are special functions to configure the compression. Perhaps the |
| most useful one changes the compression level, which currently uses |
| input compression values in the range 0 - 9. The library normally |
| uses the default compression level (Z_DEFAULT_COMPRESSION = 6). Tests |
| have shown that for a large majority of images, compression values in |
| the range 3-6 compress nearly as well as higher levels, and do so much |
| faster. For online applications it may be desirable to have maximum speed |
| (Z_BEST_SPEED = 1). With versions of zlib after v0.99, you can also |
| specify no compression (Z_NO_COMPRESSION = 0), but this would create |
| files larger than just storing the raw bitmap. You can specify the |
| compression level by calling: |
| |
| png_set_compression_level(png_ptr, level); |
| |
| Another useful one is to reduce the memory level used by the library. |
| The memory level defaults to 8, but it can be lowered if you are |
| short on memory (running DOS, for example, where you only have 640K). |
| |
| png_set_compression_mem_level(png_ptr, level); |
| |
| The other functions are for configuring zlib. They are not recommended |
| for normal use and may result in writing an invalid PNG file. See |
| zlib.h for more information on what these mean. |
| |
| png_set_compression_strategy(png_ptr, |
| strategy); |
| png_set_compression_window_bits(png_ptr, |
| window_bits); |
| png_set_compression_method(png_ptr, method); |
| |
| Controlling row filtering: |
| |
| If you want to control whether libpng uses filtering or not, which |
| filters are used, and how it goes about picking row filters, you |
| can call one of these functions. The selection and configuration |
| of row filters can have a significant impact on the size and |
| encoding speed and a somewhat lesser impact on the decoding speed |
| of an image. Filtering is enabled by default for RGB and grayscale |
| images (with and without alpha), and for 8-bit paletted images, but |
| not for paletted images with bit depths less than 8 bits/pixel. |
| |
| The 'method' parameter sets the main filtering method, which is |
| currently only '0' in the PNG 1.0 specification. The 'filters' |
| parameter sets which filter(s), if any, should be used for each |
| scanline. Possible values are PNG_ALL_FILTERS and PNG_NO_FILTERS |
| to turn filtering on and off, respectively. |
| |
| Individual filter types are PNG_FILTER_NONE, PNG_FILTER_SUB, |
| PNG_FILTER_UP, PNG_FILTER_AVG, PNG_FILTER_PAETH, which can be bitwise |
| ORed together '|' to specify one or more filters to use. These |
| filters are described in more detail in the PNG specification. If |
| you intend to change the filter type during the course of writing |
| the image, you should start with flags set for all of the filters |
| you intend to use so that libpng can initialize its internal |
| structures appropriately for all of the filter types. |
| |
| filters = PNG_FILTER_NONE | PNG_FILTER_SUB |
| | PNG_FILTER_UP; |
| png_set_filter(png_ptr, PNG_FILTER_TYPE_BASE, |
| filters); |
| |
| It is also possible to influence how libpng chooses from among the |
| available filters. This is done in two ways - by telling it how |
| important it is to keep the same filter for successive rows, and |
| by telling it the relative computational costs of the filters. |
| |
| double weights[3] = {1.5, 1.3, 1.1}, |
| costs[PNG_FILTER_VALUE_LAST] = |
| {1.0, 1.3, 1.3, 1.5, 1.7}; |
| |
| png_set_filter_selection(png_ptr, |
| PNG_FILTER_SELECTION_WEIGHTED, 3, |
| weights, costs); |
| |
| The weights are multiplying factors which indicate to libpng that row |
| should be the same for successive rows unless another row filter is that |
| many times better than the previous filter. In the above example, if |
| the previous 3 filters were SUB, SUB, NONE, the SUB filter could have a |
| "sum of absolute differences" 1.5 x 1.3 times higher than other filters |
| and still be chosen, while the NONE filter could have a sum 1.1 times |
| higher than other filters and still be chosen. Unspecified weights are |
| taken to be 1.0, and the specified weights should probably be declining |
| like those above in order to emphasize recent filters over older filters. |
| |
| The filter costs specify for each filter type a relative decoding cost |
| to be considered when selecting row filters. This means that filters |
| with higher costs are less likely to be chosen over filters with lower |
| costs, unless their "sum of absolute differences" is that much smaller. |
| The costs do not necessarily reflect the exact computational speeds of |
| the various filters, since this would unduly influence the final image |
| size. |
| |
| Note that the numbers above were invented purely for this example and |
| are given only to help explain the function usage. Little testing has |
| been done to find optimum values for either the costs or the weights. |
| |
| Removing unwanted object code: |
| |
| There are a bunch of #define's in pngconf.h that control what parts of |
| libpng are compiled. All the defines end in _SUPPORTED. If you are |
| never going to use an ability, you can change the #define to #undef |
| before recompiling libpng and save yourself code and data space. |
| You can also turn a number of them off en masse with a compiler directive |
| that defines PNG_READ[or WRITE]_TRANSFORMS_NOT_SUPPORTED, or |
| PNG_READ[or WRITE]_ANCILLARY_CHUNKS_NOT_SUPPORTED, or all four, |
| along with directives to turn on any of the capabilities that you do |
| want. The PNG_READ[or WRITE]_TRANSFORMS_NOT_SUPPORTED directives disable |
| the extra transformations but still leave the library fully capable of reading |
| and writing PNG files with all known public chunks [except for sPLT]. |
| Use of the PNG_READ[or WRITE]_ANCILLARY_CHUNKS_NOT_SUPPORTED directive |
| produces a library that is incapable of reading or writing ancillary chunks. |
| If you are not using the progressive reading capability, you can |
| turn that off with PNG_PROGRESSIVE_READ_NOT_SUPPORTED (don't confuse |
| this with the INTERLACING capability, which you'll still have). |
| |
| All the reading and writing specific code are in separate files, so the |
| linker should only grab the files it needs. However, if you want to |
| make sure, or if you are building a stand alone library, all the |
| reading files start with pngr and all the writing files start with |
| pngw. The files that don't match either (like png.c, pngtrans.c, etc.) |
| are used for both reading and writing, and always need to be included. |
| The progressive reader is in pngpread.c |
| |
| If you are creating or distributing a dynamically linked library (a .so |
| or DLL file), you should not remove or disable any parts of the library, |
| as this will cause applications linked with different versions of the |
| library to fail if they call functions not available in your library. |
| The size of the library itself should not be an issue, because only |
| those sections which are actually used will be loaded into memory. |
| |
| |
| Changes to Libpng from version 0.88 |
| |
| It should be noted that versions of libpng later than 0.96 are not |
| distributed by the original libpng author, Guy Schalnat, nor by |
| Andreas Dilger, who had taken over from Guy during 1996 and 1997, and |
| distributed versions 0.89 through 0.96, but rather by another member |
| of the original PNG Group, Glenn Randers-Pehrson. Guy and Andreas are |
| still alive and well, but they have moved on to other things. |
| |
| The old libpng functions png_read_init(), png_write_init(), |
| png_info_init(), png_read_destroy(), and png_write_destory() have been |
| moved to PNG_INTERNAL in version 0.95 to discourage their use. The |
| preferred method of creating and initializing the libpng structures is |
| via the png_create_read_struct(), png_create_write_struct(), and |
| png_create_info_struct() because they isolate the size of the structures |
| from the application, allow version error checking, and also allow the |
| use of custom error handling routines during the initialization, which |
| the old functions do not. The functions png_read_destroy() and |
| png_write_destroy() do not actually free the memory that libpng |
| allocated for these structs, but just reset the data structures, so they |
| can be used instead of png_destroy_read_struct() and |
| png_destroy_write_struct() if you feel there is too much system overhead |
| allocating and freeing the png_struct for each image read. |
| |
| Setting the error callbacks via png_set_message_fn() before |
| png_read_init() as was suggested in libpng-0.88 is no longer supported |
| because this caused applications which do not use custom error functions |
| to fail if the png_ptr was not initialized to zero. It is still possible |
| to set the error callbacks AFTER png_read_init(), or to change them with |
| png_set_error_fn(), which is essentially the same function, but with a |
| new name to force compilation errors with applications that try to use |
| the old method. |
| |