src/codec/SkCodec.cpp - skia.git - Git at Google

 /*
  * Copyright 2015 Google Inc.
  *
  * Use of this source code is governed by a BSD-style license that can be
  * found in the LICENSE file.
  */

 #include "SkBmpCodec.h"
 #include "SkCodec.h"
 #include "SkCodec_libpng.h"
 #include "SkCodecPriv.h"
 #include "SkData.h"
 #include "SkGifCodec.h"
 #include "SkIcoCodec.h"
 #if !defined(GOOGLE3)
 #include "SkJpegCodec.h"
 #endif
 #include "SkStream.h"
 #include "SkWbmpCodec.h"
 #include "SkWebpCodec.h"

 struct DecoderProc {
     bool (*IsFormat)(const void*, size_t);
     SkCodec* (*NewFromStream)(SkStream*);
 };

 static const DecoderProc gDecoderProcs[] = {
 #if !defined(GOOGLE3)
     { SkJpegCodec::IsJpeg, SkJpegCodec::NewFromStream },
 #endif
     { SkWebpCodec::IsWebp, SkWebpCodec::NewFromStream },
     { SkGifCodec::IsGif, SkGifCodec::NewFromStream },
     { SkIcoCodec::IsIco, SkIcoCodec::NewFromStream },
     { SkBmpCodec::IsBmp, SkBmpCodec::NewFromStream },
     { SkWbmpCodec::IsWbmp, SkWbmpCodec::NewFromStream }
 };

 size_t SkCodec::MinBufferedBytesNeeded() {
     return WEBP_VP8_HEADER_SIZE;
 }

 SkCodec* SkCodec::NewFromStream(SkStream* stream,
                                 SkPngChunkReader* chunkReader) {
     if (!stream) {
         return nullptr;
     }

     SkAutoTDelete<SkStream> streamDeleter(stream);

     // 14 is enough to read all of the supported types.
     const size_t bytesToRead = 14;
     SkASSERT(bytesToRead <= MinBufferedBytesNeeded());

     char buffer[bytesToRead];
     size_t bytesRead = stream->peek(buffer, bytesToRead);

     // It is also possible to have a complete image less than bytesToRead bytes
     // (e.g. a 1 x 1 wbmp), meaning peek() would return less than bytesToRead.
     // Assume that if bytesRead < bytesToRead, but > 0, the stream is shorter
     // than bytesToRead, so pass that directly to the decoder.
     // It also is possible the stream uses too small a buffer for peeking, but
     // we trust the caller to use a large enough buffer.

     if (0 == bytesRead) {
         // TODO: After implementing peek in CreateJavaOutputStreamAdaptor.cpp, this
         // printf could be useful to notice failures.
         // SkCodecPrintf("Encoded image data failed to peek!\n");

         // It is possible the stream does not support peeking, but does support
         // rewinding.
         // Attempt to read() and pass the actual amount read to the decoder.
         bytesRead = stream->read(buffer, bytesToRead);
         if (!stream->rewind()) {
             SkCodecPrintf("Encoded image data could not peek or rewind to determine format!\n");
             return nullptr;
         }
     }

     // PNG is special, since we want to be able to supply an SkPngChunkReader.
     // But this code follows the same pattern as the loop.
     if (SkPngCodec::IsPng(buffer, bytesRead)) {
         return SkPngCodec::NewFromStream(streamDeleter.detach(), chunkReader);
     } else {
         for (DecoderProc proc : gDecoderProcs) {
             if (proc.IsFormat(buffer, bytesRead)) {
                 return proc.NewFromStream(streamDeleter.detach());
             }
         }
     }

     return nullptr;
 }

 SkCodec* SkCodec::NewFromData(SkData* data, SkPngChunkReader* reader) {
     if (!data) {
         return nullptr;
     }
     return NewFromStream(new SkMemoryStream(data), reader);
 }

 SkCodec::SkCodec(const SkImageInfo& info, SkStream* stream)
     : fSrcInfo(info)
     , fStream(stream)
     , fNeedsRewind(false)
     , fDstInfo()
     , fOptions()
     , fCurrScanline(-1)
 {}

 SkCodec::~SkCodec() {}

 bool SkCodec::rewindIfNeeded() {
     if (!fStream) {
         // Some codecs do not have a stream, but they hold others that do. They
         // must handle rewinding themselves.
         return true;
     }

     // Store the value of fNeedsRewind so we can update it. Next read will
     // require a rewind.
     const bool needsRewind = fNeedsRewind;
     fNeedsRewind = true;
     if (!needsRewind) {
         return true;
     }

     // startScanlineDecode will need to be called before decoding scanlines.
     fCurrScanline = -1;

     if (!fStream->rewind()) {
         return false;
     }

     return this->onRewind();
 }

 SkCodec::Result SkCodec::getPixels(const SkImageInfo& info, void* pixels, size_t rowBytes,
                                    const Options* options, SkPMColor ctable[], int* ctableCount) {
     if (kUnknown_SkColorType == info.colorType()) {
         return kInvalidConversion;
     }
     if (nullptr == pixels) {
         return kInvalidParameters;
     }
     if (rowBytes < info.minRowBytes()) {
         return kInvalidParameters;
     }

     if (kIndex_8_SkColorType == info.colorType()) {
         if (nullptr == ctable || nullptr == ctableCount) {
             return kInvalidParameters;
         }
     } else {
         if (ctableCount) {
             *ctableCount = 0;
         }
         ctableCount = nullptr;
         ctable = nullptr;
     }

     {
         SkAlphaType canonical;
         if (!SkColorTypeValidateAlphaType(info.colorType(), info.alphaType(), &canonical)
             || canonical != info.alphaType())
         {
             return kInvalidConversion;
         }
     }

     if (!this->rewindIfNeeded()) {
         return kCouldNotRewind;
     }

     // Default options.
     Options optsStorage;
     if (nullptr == options) {
         options = &optsStorage;
     } else if (options->fSubset) {
         SkIRect subset(*options->fSubset);
         if (!this->onGetValidSubset(&subset) || subset != *options->fSubset) {
             // FIXME: How to differentiate between not supporting subset at all
             // and not supporting this particular subset?
             return kUnimplemented;
         }
     }

     // FIXME: Support subsets somehow? Note that this works for SkWebpCodec
     // because it supports arbitrary scaling/subset combinations.
     if (!this->dimensionsSupported(info.dimensions())) {
         return kInvalidScale;
     }

     // On an incomplete decode, the subclass will specify the number of scanlines that it decoded
     // successfully.
     int rowsDecoded = 0;
     const Result result = this->onGetPixels(info, pixels, rowBytes, *options, ctable, ctableCount,
             &rowsDecoded);

     if ((kIncompleteInput == result || kSuccess == result) && ctableCount) {
         SkASSERT(*ctableCount >= 0 && *ctableCount <= 256);
     }

     // A return value of kIncompleteInput indicates a truncated image stream.
     // In this case, we will fill any uninitialized memory with a default value.
     // Some subclasses will take care of filling any uninitialized memory on
     // their own.  They indicate that all of the memory has been filled by
     // setting rowsDecoded equal to the height.
     if (kIncompleteInput == result && rowsDecoded != info.height()) {
         this->fillIncompleteImage(info, pixels, rowBytes, options->fZeroInitialized, info.height(),
                 rowsDecoded);
     }

     return result;
 }

 SkCodec::Result SkCodec::getPixels(const SkImageInfo& info, void* pixels, size_t rowBytes) {
     return this->getPixels(info, pixels, rowBytes, nullptr, nullptr, nullptr);
 }

 SkCodec::Result SkCodec::startScanlineDecode(const SkImageInfo& dstInfo,
         const SkCodec::Options* options, SkPMColor ctable[], int* ctableCount) {
     // Reset fCurrScanline in case of failure.
     fCurrScanline = -1;
     // Ensure that valid color ptrs are passed in for kIndex8 color type
     if (kIndex_8_SkColorType == dstInfo.colorType()) {
         if (nullptr == ctable || nullptr == ctableCount) {
             return SkCodec::kInvalidParameters;
         }
     } else {
         if (ctableCount) {
             *ctableCount = 0;
         }
         ctableCount = nullptr;
         ctable = nullptr;
     }

     if (!this->rewindIfNeeded()) {
         return kCouldNotRewind;
     }

     // Set options.
     Options optsStorage;
     if (nullptr == options) {
         options = &optsStorage;
     } else if (options->fSubset) {
         SkIRect size = SkIRect::MakeSize(dstInfo.dimensions());
         if (!size.contains(*options->fSubset)) {
             return kInvalidInput;
         }

         // We only support subsetting in the x-dimension for scanline decoder.
         // Subsetting in the y-dimension can be accomplished using skipScanlines().
         if (options->fSubset->top() != 0 || options->fSubset->height() != dstInfo.height()) {
             return kInvalidInput;
         }
     }

     // FIXME: Support subsets somehow?
     if (!this->dimensionsSupported(dstInfo.dimensions())) {
         return kInvalidScale;
     }

     const Result result = this->onStartScanlineDecode(dstInfo, *options, ctable, ctableCount);
     if (result != SkCodec::kSuccess) {
         return result;
     }

     fCurrScanline = 0;
     fDstInfo = dstInfo;
     fOptions = *options;
     return kSuccess;
 }

 SkCodec::Result SkCodec::startScanlineDecode(const SkImageInfo& dstInfo) {
     return this->startScanlineDecode(dstInfo, nullptr, nullptr, nullptr);
 }

 int SkCodec::getScanlines(void* dst, int countLines, size_t rowBytes) {
     if (fCurrScanline < 0) {
         return 0;
     }

     SkASSERT(!fDstInfo.isEmpty());
     if (countLines <= 0 || fCurrScanline + countLines > fDstInfo.height()) {
         return 0;
     }

     const int linesDecoded = this->onGetScanlines(dst, countLines, rowBytes);
     if (linesDecoded < countLines) {
         this->fillIncompleteImage(this->dstInfo(), dst, rowBytes, this->options().fZeroInitialized,
                 countLines, linesDecoded);
     }
     fCurrScanline += countLines;
     return linesDecoded;
 }

 bool SkCodec::skipScanlines(int countLines) {
     if (fCurrScanline < 0) {
         return false;
     }

     SkASSERT(!fDstInfo.isEmpty());
     if (countLines < 0 || fCurrScanline + countLines > fDstInfo.height()) {
         // Arguably, we could just skip the scanlines which are remaining,
         // and return true. We choose to return false so the client
         // can catch their bug.
         return false;
     }

     bool result = this->onSkipScanlines(countLines);
     fCurrScanline += countLines;
     return result;
 }

 int SkCodec::outputScanline(int inputScanline) const {
     SkASSERT(0 <= inputScanline && inputScanline < this->getInfo().height());
     return this->onOutputScanline(inputScanline);
 }

 int SkCodec::onOutputScanline(int inputScanline) const {
     switch (this->getScanlineOrder()) {
         case kTopDown_SkScanlineOrder:
         case kNone_SkScanlineOrder:
             return inputScanline;
         case kBottomUp_SkScanlineOrder:
             return this->getInfo().height() - inputScanline - 1;
         default:
             // This case indicates an interlaced gif and is implemented by SkGifCodec.
             SkASSERT(false);
             return 0;
     }
 }

 static void fill_proc(const SkImageInfo& info, void* dst, size_t rowBytes,
         uint32_t colorOrIndex, SkCodec::ZeroInitialized zeroInit, SkSampler* sampler) {
     if (sampler) {
         sampler->fill(info, dst, rowBytes, colorOrIndex, zeroInit);
     } else {
         SkSampler::Fill(info, dst, rowBytes, colorOrIndex, zeroInit);
     }
 }

 void SkCodec::fillIncompleteImage(const SkImageInfo& info, void* dst, size_t rowBytes,
         ZeroInitialized zeroInit, int linesRequested, int linesDecoded) {

     void* fillDst;
     const uint32_t fillValue = this->getFillValue(info.colorType(), info.alphaType());
     const int linesRemaining = linesRequested - linesDecoded;
     SkSampler* sampler = this->getSampler(false);

     switch (this->getScanlineOrder()) {
         case kTopDown_SkScanlineOrder:
         case kNone_SkScanlineOrder: {
             const SkImageInfo fillInfo = info.makeWH(info.width(), linesRemaining);
             fillDst = SkTAddOffset<void>(dst, linesDecoded * rowBytes);
             fill_proc(fillInfo, fillDst, rowBytes, fillValue, zeroInit, sampler);
             break;
         }
         case kBottomUp_SkScanlineOrder: {
             fillDst = dst;
             const SkImageInfo fillInfo = info.makeWH(info.width(), linesRemaining);
             fill_proc(fillInfo, fillDst, rowBytes, fillValue, zeroInit, sampler);
             break;
         }
         case kOutOfOrder_SkScanlineOrder: {
             SkASSERT(1 == linesRequested || this->getInfo().height() == linesRequested);
             const SkImageInfo fillInfo = info.makeWH(info.width(), 1);
             for (int srcY = linesDecoded; srcY < linesRequested; srcY++) {
                 fillDst = SkTAddOffset<void>(dst, this->outputScanline(srcY) * rowBytes);
                 fill_proc(fillInfo, fillDst, rowBytes, fillValue, zeroInit, sampler);
             }
             break;
         }
     }
 }
	/*
	* Copyright 2015 Google Inc.
	*
	* Use of this source code is governed by a BSD-style license that can be
	* found in the LICENSE file.
	*/

	#include "SkBmpCodec.h"
	#include "SkCodec.h"
	#include "SkCodec_libpng.h"
	#include "SkCodecPriv.h"
	#include "SkData.h"
	#include "SkGifCodec.h"
	#include "SkIcoCodec.h"
	#if !defined(GOOGLE3)
	#include "SkJpegCodec.h"
	#endif
	#include "SkStream.h"
	#include "SkWbmpCodec.h"
	#include "SkWebpCodec.h"

	struct DecoderProc {
	bool (IsFormat)(const void, size_t);
	SkCodec* (NewFromStream)(SkStream);
	};

	static const DecoderProc gDecoderProcs[] = {
	#if !defined(GOOGLE3)
	{ SkJpegCodec::IsJpeg, SkJpegCodec::NewFromStream },
	#endif
	{ SkWebpCodec::IsWebp, SkWebpCodec::NewFromStream },
	{ SkGifCodec::IsGif, SkGifCodec::NewFromStream },
	{ SkIcoCodec::IsIco, SkIcoCodec::NewFromStream },
	{ SkBmpCodec::IsBmp, SkBmpCodec::NewFromStream },
	{ SkWbmpCodec::IsWbmp, SkWbmpCodec::NewFromStream }
	};

	size_t SkCodec::MinBufferedBytesNeeded() {
	return WEBP_VP8_HEADER_SIZE;
	}

	SkCodec* SkCodec::NewFromStream(SkStream* stream,
	SkPngChunkReader* chunkReader) {
	if (!stream) {
	return nullptr;
	}

	SkAutoTDelete<SkStream> streamDeleter(stream);

	// 14 is enough to read all of the supported types.
	const size_t bytesToRead = 14;
	SkASSERT(bytesToRead <= MinBufferedBytesNeeded());

	char buffer[bytesToRead];
	size_t bytesRead = stream->peek(buffer, bytesToRead);

	// It is also possible to have a complete image less than bytesToRead bytes
	// (e.g. a 1 x 1 wbmp), meaning peek() would return less than bytesToRead.
	// Assume that if bytesRead < bytesToRead, but > 0, the stream is shorter
	// than bytesToRead, so pass that directly to the decoder.
	// It also is possible the stream uses too small a buffer for peeking, but
	// we trust the caller to use a large enough buffer.

	if (0 == bytesRead) {
	// TODO: After implementing peek in CreateJavaOutputStreamAdaptor.cpp, this
	// printf could be useful to notice failures.
	// SkCodecPrintf("Encoded image data failed to peek!\n");

	// It is possible the stream does not support peeking, but does support
	// rewinding.
	// Attempt to read() and pass the actual amount read to the decoder.
	bytesRead = stream->read(buffer, bytesToRead);
	if (!stream->rewind()) {
	SkCodecPrintf("Encoded image data could not peek or rewind to determine format!\n");
	return nullptr;
	}
	}

	// PNG is special, since we want to be able to supply an SkPngChunkReader.
	// But this code follows the same pattern as the loop.
	if (SkPngCodec::IsPng(buffer, bytesRead)) {
	return SkPngCodec::NewFromStream(streamDeleter.detach(), chunkReader);
	} else {
	for (DecoderProc proc : gDecoderProcs) {
	if (proc.IsFormat(buffer, bytesRead)) {
	return proc.NewFromStream(streamDeleter.detach());
	}
	}
	}

	return nullptr;
	}

	SkCodec* SkCodec::NewFromData(SkData* data, SkPngChunkReader* reader) {
	if (!data) {
	return nullptr;
	}
	return NewFromStream(new SkMemoryStream(data), reader);
	}

	SkCodec::SkCodec(const SkImageInfo& info, SkStream* stream)
	: fSrcInfo(info)
	, fStream(stream)
	, fNeedsRewind(false)
	, fDstInfo()
	, fOptions()
	, fCurrScanline(-1)
	{}

	SkCodec::~SkCodec() {}

	bool SkCodec::rewindIfNeeded() {
	if (!fStream) {
	// Some codecs do not have a stream, but they hold others that do. They
	// must handle rewinding themselves.
	return true;
	}

	// Store the value of fNeedsRewind so we can update it. Next read will
	// require a rewind.
	const bool needsRewind = fNeedsRewind;
	fNeedsRewind = true;
	if (!needsRewind) {
	return true;
	}

	// startScanlineDecode will need to be called before decoding scanlines.
	fCurrScanline = -1;

	if (!fStream->rewind()) {
	return false;
	}

	return this->onRewind();
	}

	SkCodec::Result SkCodec::getPixels(const SkImageInfo& info, void* pixels, size_t rowBytes,
	const Options* options, SkPMColor ctable[], int* ctableCount) {
	if (kUnknown_SkColorType == info.colorType()) {
	return kInvalidConversion;
	}
	if (nullptr == pixels) {
	return kInvalidParameters;
	}
	if (rowBytes < info.minRowBytes()) {
	return kInvalidParameters;
	}

	if (kIndex_8_SkColorType == info.colorType()) {
	if (nullptr == ctable \|\| nullptr == ctableCount) {
	return kInvalidParameters;
	}
	} else {
	if (ctableCount) {
	*ctableCount = 0;
	}
	ctableCount = nullptr;
	ctable = nullptr;
	}

	{
	SkAlphaType canonical;
	if (!SkColorTypeValidateAlphaType(info.colorType(), info.alphaType(), &canonical)
	\|\| canonical != info.alphaType())
	{
	return kInvalidConversion;
	}
	}

	if (!this->rewindIfNeeded()) {
	return kCouldNotRewind;
	}

	// Default options.
	Options optsStorage;
	if (nullptr == options) {
	options = &optsStorage;
	} else if (options->fSubset) {
	SkIRect subset(*options->fSubset);
	if (!this->onGetValidSubset(&subset) \|\| subset != *options->fSubset) {
	// FIXME: How to differentiate between not supporting subset at all
	// and not supporting this particular subset?
	return kUnimplemented;
	}
	}

	// FIXME: Support subsets somehow? Note that this works for SkWebpCodec
	// because it supports arbitrary scaling/subset combinations.
	if (!this->dimensionsSupported(info.dimensions())) {
	return kInvalidScale;
	}

	// On an incomplete decode, the subclass will specify the number of scanlines that it decoded
	// successfully.
	int rowsDecoded = 0;
	const Result result = this->onGetPixels(info, pixels, rowBytes, *options, ctable, ctableCount,
	&rowsDecoded);

	if ((kIncompleteInput == result \|\| kSuccess == result) && ctableCount) {
	SkASSERT(ctableCount >= 0 && ctableCount <= 256);
	}

	// A return value of kIncompleteInput indicates a truncated image stream.
	// In this case, we will fill any uninitialized memory with a default value.
	// Some subclasses will take care of filling any uninitialized memory on
	// their own. They indicate that all of the memory has been filled by
	// setting rowsDecoded equal to the height.
	if (kIncompleteInput == result && rowsDecoded != info.height()) {
	this->fillIncompleteImage(info, pixels, rowBytes, options->fZeroInitialized, info.height(),
	rowsDecoded);
	}

	return result;
	}

	SkCodec::Result SkCodec::getPixels(const SkImageInfo& info, void* pixels, size_t rowBytes) {
	return this->getPixels(info, pixels, rowBytes, nullptr, nullptr, nullptr);
	}

	SkCodec::Result SkCodec::startScanlineDecode(const SkImageInfo& dstInfo,
	const SkCodec::Options* options, SkPMColor ctable[], int* ctableCount) {
	// Reset fCurrScanline in case of failure.
	fCurrScanline = -1;
	// Ensure that valid color ptrs are passed in for kIndex8 color type
	if (kIndex_8_SkColorType == dstInfo.colorType()) {
	if (nullptr == ctable \|\| nullptr == ctableCount) {
	return SkCodec::kInvalidParameters;
	}
	} else {
	if (ctableCount) {
	*ctableCount = 0;
	}
	ctableCount = nullptr;
	ctable = nullptr;
	}

	if (!this->rewindIfNeeded()) {
	return kCouldNotRewind;
	}

	// Set options.
	Options optsStorage;
	if (nullptr == options) {
	options = &optsStorage;
	} else if (options->fSubset) {
	SkIRect size = SkIRect::MakeSize(dstInfo.dimensions());
	if (!size.contains(*options->fSubset)) {
	return kInvalidInput;
	}

	// We only support subsetting in the x-dimension for scanline decoder.
	// Subsetting in the y-dimension can be accomplished using skipScanlines().
	if (options->fSubset->top() != 0 \|\| options->fSubset->height() != dstInfo.height()) {
	return kInvalidInput;
	}
	}

	// FIXME: Support subsets somehow?
	if (!this->dimensionsSupported(dstInfo.dimensions())) {
	return kInvalidScale;
	}

	const Result result = this->onStartScanlineDecode(dstInfo, *options, ctable, ctableCount);
	if (result != SkCodec::kSuccess) {
	return result;
	}

	fCurrScanline = 0;
	fDstInfo = dstInfo;
	fOptions = *options;
	return kSuccess;
	}

	SkCodec::Result SkCodec::startScanlineDecode(const SkImageInfo& dstInfo) {
	return this->startScanlineDecode(dstInfo, nullptr, nullptr, nullptr);
	}

	int SkCodec::getScanlines(void* dst, int countLines, size_t rowBytes) {
	if (fCurrScanline < 0) {
	return 0;
	}

	SkASSERT(!fDstInfo.isEmpty());
	if (countLines <= 0 \|\| fCurrScanline + countLines > fDstInfo.height()) {
	return 0;
	}

	const int linesDecoded = this->onGetScanlines(dst, countLines, rowBytes);
	if (linesDecoded < countLines) {
	this->fillIncompleteImage(this->dstInfo(), dst, rowBytes, this->options().fZeroInitialized,
	countLines, linesDecoded);
	}
	fCurrScanline += countLines;
	return linesDecoded;
	}

	bool SkCodec::skipScanlines(int countLines) {
	if (fCurrScanline < 0) {
	return false;
	}

	SkASSERT(!fDstInfo.isEmpty());
	if (countLines < 0 \|\| fCurrScanline + countLines > fDstInfo.height()) {
	// Arguably, we could just skip the scanlines which are remaining,
	// and return true. We choose to return false so the client
	// can catch their bug.
	return false;
	}

	bool result = this->onSkipScanlines(countLines);
	fCurrScanline += countLines;
	return result;
	}

	int SkCodec::outputScanline(int inputScanline) const {
	SkASSERT(0 <= inputScanline && inputScanline < this->getInfo().height());
	return this->onOutputScanline(inputScanline);
	}

	int SkCodec::onOutputScanline(int inputScanline) const {
	switch (this->getScanlineOrder()) {
	case kTopDown_SkScanlineOrder:
	case kNone_SkScanlineOrder:
	return inputScanline;
	case kBottomUp_SkScanlineOrder:
	return this->getInfo().height() - inputScanline - 1;
	default:
	// This case indicates an interlaced gif and is implemented by SkGifCodec.
	SkASSERT(false);
	return 0;
	}
	}

	static void fill_proc(const SkImageInfo& info, void* dst, size_t rowBytes,
	uint32_t colorOrIndex, SkCodec::ZeroInitialized zeroInit, SkSampler* sampler) {
	if (sampler) {
	sampler->fill(info, dst, rowBytes, colorOrIndex, zeroInit);
	} else {
	SkSampler::Fill(info, dst, rowBytes, colorOrIndex, zeroInit);
	}
	}

	void SkCodec::fillIncompleteImage(const SkImageInfo& info, void* dst, size_t rowBytes,
	ZeroInitialized zeroInit, int linesRequested, int linesDecoded) {

	void* fillDst;
	const uint32_t fillValue = this->getFillValue(info.colorType(), info.alphaType());
	const int linesRemaining = linesRequested - linesDecoded;
	SkSampler* sampler = this->getSampler(false);

	switch (this->getScanlineOrder()) {
	case kTopDown_SkScanlineOrder:
	case kNone_SkScanlineOrder: {
	const SkImageInfo fillInfo = info.makeWH(info.width(), linesRemaining);
	fillDst = SkTAddOffset<void>(dst, linesDecoded * rowBytes);
	fill_proc(fillInfo, fillDst, rowBytes, fillValue, zeroInit, sampler);
	break;
	}
	case kBottomUp_SkScanlineOrder: {
	fillDst = dst;
	const SkImageInfo fillInfo = info.makeWH(info.width(), linesRemaining);
	fill_proc(fillInfo, fillDst, rowBytes, fillValue, zeroInit, sampler);
	break;
	}
	case kOutOfOrder_SkScanlineOrder: {
	SkASSERT(1 == linesRequested \|\| this->getInfo().height() == linesRequested);
	const SkImageInfo fillInfo = info.makeWH(info.width(), 1);
	for (int srcY = linesDecoded; srcY < linesRequested; srcY++) {
	fillDst = SkTAddOffset<void>(dst, this->outputScanline(srcY) * rowBytes);
	fill_proc(fillInfo, fillDst, rowBytes, fillValue, zeroInit, sampler);
	}
	break;
	}
	}
	}