| /* | |
| * Copyright 2015 Google Inc. | |
| * | |
| * Use of this source code is governed by a BSD-style license that can be | |
| * found in the LICENSE file. | |
| * | |
| * Initial import from skia:src/gpu/ganesh/geometry/GrTriangulator.h | |
| * | |
| * Copyright 2023 Rive | |
| */ | |
| #ifndef GrTriangulator_DEFINED | |
| #define GrTriangulator_DEFINED | |
| #if !defined(SK_ENABLE_OPTIMIZE_SIZE) | |
| #include "rive/math/raw_path.hpp" | |
| #include "rive/math/vec2d.hpp" | |
| #include "rive/math/aabb.hpp" | |
| #include "rive/pls/pls.hpp" | |
| #include "rive/pls/trivial_block_allocator.hpp" | |
| namespace rive | |
| { | |
| #define TRIANGULATOR_LOGGING 0 | |
| #define TRIANGULATOR_WIREFRAME 0 | |
| /** | |
| * Provides utility functions for converting paths to a collection of triangles. | |
| */ | |
| class GrTriangulator | |
| { | |
| public: | |
| constexpr static int kArenaDefaultChunkSize = 16 * 1024; | |
| struct Comparator | |
| { | |
| enum class Direction | |
| { | |
| kVertical, | |
| kHorizontal | |
| }; | |
| Comparator(Direction direction) : fDirection(direction) {} | |
| bool sweep_lt(const Vec2D& a, const Vec2D& b) const; | |
| Direction fDirection; | |
| }; | |
| // Enums used by GrTriangulator internals. | |
| typedef enum | |
| { | |
| kLeft_Side, | |
| kRight_Side | |
| } Side; | |
| enum class EdgeType | |
| { | |
| kInner, | |
| kOuter, | |
| kConnector | |
| }; | |
| // Structs used by GrTriangulator internals. | |
| struct Vertex; | |
| struct VertexList; | |
| struct Line; | |
| struct Edge; | |
| struct EdgeList; | |
| struct MonotonePoly; | |
| struct Poly; | |
| protected: | |
| GrTriangulator(Comparator::Direction direction, | |
| FillRule fillRule, | |
| TrivialBlockAllocator* alloc) : | |
| fDirection(direction), fFillRule(fillRule), fAlloc(alloc) | |
| {} | |
| // There are six stages to the basic algorithm: | |
| // | |
| // 1) Linearize the path contours into piecewise linear segments: | |
| void pathToContours(const RawPath& path, | |
| float tolerance, | |
| const AABB& clipBounds, | |
| VertexList* contours, | |
| bool* isLinear) const; | |
| // 2) Build a mesh of edges connecting the vertices: | |
| void contoursToMesh(VertexList* contours, int contourCnt, VertexList* mesh, const Comparator&); | |
| // 3) Sort the vertices in Y (and secondarily in X): | |
| static void SortedMerge(VertexList* front, | |
| VertexList* back, | |
| VertexList* result, | |
| const Comparator&); | |
| static void SortMesh(VertexList* vertices, const Comparator&); | |
| // 4) Simplify the mesh by inserting new vertices at intersecting edges: | |
| enum class SimplifyResult | |
| { | |
| kFailed, | |
| kAlreadySimple, | |
| kFoundSelfIntersection | |
| }; | |
| [[nodiscard]] SimplifyResult simplify(VertexList* mesh, const Comparator&); | |
| // 5) Tessellate the simplified mesh into monotone polygons: | |
| virtual std::tuple<Poly*, bool> tessellate(const VertexList& vertices, const Comparator&); | |
| // 6) Triangulate the monotone polygons directly into a vertex buffer: | |
| void polysToTriangles(const Poly* polys, | |
| FillRule overrideFillRule, | |
| uint16_t pathID, | |
| bool reverseTriangles, | |
| pls::WriteOnlyMappedMemory<pls::TriangleVertex>*) const; | |
| // The vertex sorting in step (3) is a merge sort, since it plays well with the linked list | |
| // of vertices (and the necessity of inserting new vertices on intersection). | |
| // | |
| // Stages (4) and (5) use an active edge list -- a list of all edges for which the | |
| // sweep line has crossed the top vertex, but not the bottom vertex. It's sorted | |
| // left-to-right based on the point where both edges are active (when both top vertices | |
| // have been seen, so the "lower" top vertex of the two). If the top vertices are equal | |
| // (shared), it's sorted based on the last point where both edges are active, so the | |
| // "upper" bottom vertex. | |
| // | |
| // The most complex step is the simplification (4). It's based on the Bentley-Ottman | |
| // line-sweep algorithm, but due to floating point inaccuracy, the intersection points are | |
| // not exact and may violate the mesh topology or active edge list ordering. We | |
| // accommodate this by adjusting the topology of the mesh and AEL to match the intersection | |
| // points. This occurs in two ways: | |
| // | |
| // A) Intersections may cause a shortened edge to no longer be ordered with respect to its | |
| // neighbouring edges at the top or bottom vertex. This is handled by merging the | |
| // edges (mergeCollinearVertices()). | |
| // B) Intersections may cause an edge to violate the left-to-right ordering of the | |
| // active edge list. This is handled by detecting potential violations and rewinding | |
| // the active edge list to the vertex before they occur (rewind() during merging, | |
| // rewind_if_necessary() during splitting). | |
| // | |
| // The tessellation steps (5) and (6) are based on "Triangulating Simple Polygons and | |
| // Equivalent Problems" (Fournier and Montuno); also a line-sweep algorithm. Note that it | |
| // currently uses a linked list for the active edge list, rather than a 2-3 tree as the | |
| // paper describes. The 2-3 tree gives O(lg N) lookups, but insertion and removal also | |
| // become O(lg N). In all the test cases, it was found that the cost of frequent O(lg N) | |
| // insertions and removals was greater than the cost of infrequent O(N) lookups with the | |
| // linked list implementation. With the latter, all removals are O(1), and most insertions | |
| // are O(1), since we know the adjacent edge in the active edge list based on the topology. | |
| // Only type 2 vertices (see paper) require the O(N) lookups, and these are much less | |
| // frequent. There may be other data structures worth investigating, however. | |
| // | |
| // Note that the orientation of the line sweep algorithms is determined by the aspect ratio of | |
| // the path bounds. When the path is taller than it is wide, we sort vertices based on | |
| // increasing Y coordinate, and secondarily by increasing X coordinate. When the path is wider | |
| // than it is tall, we sort by increasing X coordinate, but secondarily by *decreasing* Y | |
| // coordinate. This is so that the "left" and "right" orientation in the code remains correct | |
| // (edges to the left are increasing in Y; edges to the right are decreasing in Y). That is, the | |
| // setting rotates 90 degrees counterclockwise, rather that transposing. | |
| // Additional helpers and driver functions. | |
| void emitMonotonePoly(const MonotonePoly*, | |
| uint16_t pathID, | |
| bool reverseTriangles, | |
| pls::WriteOnlyMappedMemory<pls::TriangleVertex>*) const; | |
| void emitTriangle(Vertex* prev, | |
| Vertex* curr, | |
| Vertex* next, | |
| int winding, | |
| uint16_t pathID, | |
| bool reverseTriangles, | |
| pls::WriteOnlyMappedMemory<pls::TriangleVertex>*) const; | |
| void emitPoly(const Poly*, | |
| uint16_t pathID, | |
| bool reverseTriangles, | |
| pls::WriteOnlyMappedMemory<pls::TriangleVertex>*) const; | |
| Poly* makePoly(Poly** head, Vertex* v, int winding) const; | |
| void appendPointToContour(const Vec2D& p, VertexList* contour) const; | |
| void appendQuadraticToContour(const Vec2D[3], float toleranceSqd, VertexList* contour) const; | |
| void generateCubicPoints(const Vec2D&, | |
| const Vec2D&, | |
| const Vec2D&, | |
| const Vec2D&, | |
| float tolSqd, | |
| VertexList* contour, | |
| int pointsLeft) const; | |
| bool applyFillType(int winding) const; | |
| MonotonePoly* allocateMonotonePoly(Edge* edge, Side side, int winding); | |
| Edge* allocateEdge(Vertex* top, Vertex* bottom, int winding, EdgeType type); | |
| Edge* makeEdge(Vertex* prev, Vertex* next, EdgeType type, const Comparator&); | |
| void setTop(Edge* edge, | |
| Vertex* v, | |
| EdgeList* activeEdges, | |
| Vertex** current, | |
| const Comparator&) const; | |
| void setBottom(Edge* edge, | |
| Vertex* v, | |
| EdgeList* activeEdges, | |
| Vertex** current, | |
| const Comparator&) const; | |
| void mergeEdgesAbove(Edge* edge, | |
| Edge* other, | |
| EdgeList* activeEdges, | |
| Vertex** current, | |
| const Comparator&) const; | |
| void mergeEdgesBelow(Edge* edge, | |
| Edge* other, | |
| EdgeList* activeEdges, | |
| Vertex** current, | |
| const Comparator&) const; | |
| Edge* makeConnectingEdge(Vertex* prev, | |
| Vertex* next, | |
| EdgeType, | |
| const Comparator&, | |
| int windingScale = 1); | |
| void mergeVertices(Vertex* src, Vertex* dst, VertexList* mesh, const Comparator&) const; | |
| static void FindEnclosingEdges(const Vertex& v, | |
| const EdgeList& edges, | |
| Edge** left, | |
| Edge** right); | |
| void mergeCollinearEdges(Edge* edge, | |
| EdgeList* activeEdges, | |
| Vertex** current, | |
| const Comparator&) const; | |
| bool splitEdge(Edge* edge, | |
| Vertex* v, | |
| EdgeList* activeEdges, | |
| Vertex** current, | |
| const Comparator&); | |
| bool intersectEdgePair(Edge* left, | |
| Edge* right, | |
| EdgeList* activeEdges, | |
| Vertex** current, | |
| const Comparator&); | |
| Vertex* makeSortedVertex(const Vec2D&, | |
| uint8_t alpha, | |
| VertexList* mesh, | |
| Vertex* reference, | |
| const Comparator&) const; | |
| #if 0 | |
| void computeBisector(Edge* edge1, Edge* edge2, Vertex*) const; | |
| #endif | |
| bool checkForIntersection(Edge* left, | |
| Edge* right, | |
| EdgeList* activeEdges, | |
| Vertex** current, | |
| VertexList* mesh, | |
| const Comparator&); | |
| void sanitizeContours(VertexList* contours, int contourCnt) const; | |
| bool mergeCoincidentVertices(VertexList* mesh, const Comparator&) const; | |
| void buildEdges(VertexList* contours, int contourCnt, VertexList* mesh, const Comparator&); | |
| std::tuple<Poly*, bool> contoursToPolys(VertexList* contours, int contourCnt); | |
| std::tuple<Poly*, bool> pathToPolys(const RawPath&, | |
| float tolerance, | |
| const AABB& clipBounds, | |
| bool* isLinear); | |
| static int64_t CountPoints(const Poly* polys, FillRule overrideFillRule); | |
| size_t countMaxTriangleVertices(const Poly*) const; | |
| size_t polysToTriangles(const Poly*, | |
| uint64_t maxVertexCount, | |
| uint16_t pathID, | |
| bool reverseTriangles, | |
| pls::WriteOnlyMappedMemory<pls::TriangleVertex>*) const; | |
| Comparator::Direction fDirection; | |
| FillRule fFillRule; | |
| TrivialBlockAllocator* fAlloc; | |
| int fNumMonotonePolys = 0; | |
| int fNumEdges = 0; | |
| // Internal control knobs. | |
| #if 0 | |
| bool fRoundVerticesToQuarterPixel = false; | |
| bool fEmitCoverage = false; | |
| #endif | |
| bool fPreserveCollinearVertices = false; | |
| bool fCollectGroutTriangles = false; | |
| // The grout triangles serve as a glue that erases T-junctions between a path's outer | |
| // curves and its inner polygon triangulation. Drawing a path's outer curves, grout | |
| // triangles, and inner polygon triangulation all together into the stencil buffer has the same | |
| // identical rasterized effect as stenciling a classic Redbook fan. | |
| // | |
| // The grout triangles track all the edge splits that led from the original inner polygon | |
| // edges to the final triangulation. Every time an edge splits, we emit a razor-thin grout | |
| // triangle consisting of the edge's original endpoints and the split point. (We also add | |
| // supplemental grout triangles to areas where abs(winding) > 1.) | |
| // | |
| // a | |
| // / | |
| // / | |
| // / | |
| // x <- Edge splits at x. New grout triangle is: [a, b, x]. | |
| // / | |
| // / | |
| // b | |
| // | |
| // The opposite-direction shared edges between the triangulation and grout triangles should | |
| // all cancel out, leaving just the set of edges from the original polygon. | |
| class GroutTriangleList | |
| { | |
| public: | |
| struct Node | |
| { | |
| Node(Vec2D a, Vec2D b, Vec2D c) : fPts{a, b, c} {} | |
| Vec2D fPts[3]; | |
| Node* fNext = nullptr; | |
| }; | |
| const Node* head() const { return fHead; } | |
| int count() const { return fCount; } | |
| void append(TrivialBlockAllocator* alloc, Vec2D a, Vec2D b, Vec2D c, int winding) | |
| { | |
| if (a == b || a == c || b == c || winding == 0) | |
| { | |
| return; | |
| } | |
| if (winding < 0) | |
| { | |
| std::swap(a, b); | |
| winding = -winding; | |
| } | |
| for (int i = 0; i < winding; ++i) | |
| { | |
| assert(fTail && !(*fTail)); | |
| *fTail = alloc->make<Node>(a, b, c); | |
| fTail = &(*fTail)->fNext; | |
| } | |
| fCount += winding; | |
| } | |
| void concat(GroutTriangleList&& list) | |
| { | |
| assert(fTail && !(*fTail)); | |
| if (list.fHead) | |
| { | |
| *fTail = list.fHead; | |
| fTail = list.fTail; | |
| fCount += list.fCount; | |
| list.fHead = nullptr; | |
| list.fTail = &list.fHead; | |
| list.fCount = 0; | |
| } | |
| } | |
| private: | |
| Node* fHead = nullptr; | |
| Node** fTail = &fHead; | |
| int fCount = 0; | |
| }; | |
| mutable GroutTriangleList fGroutList; | |
| }; | |
| /** | |
| * Vertices are used in three ways: first, the path contours are converted into a | |
| * circularly-linked list of Vertices for each contour. After edge construction, the same Vertices | |
| * are re-ordered by the merge sort according to the sweep_lt comparator (usually, increasing | |
| * in Y) using the same fPrev/fNext pointers that were used for the contours, to avoid | |
| * reallocation. Finally, MonotonePolys are built containing a circularly-linked list of | |
| * Vertices. (Currently, those Vertices are newly-allocated for the MonotonePolys, since | |
| * an individual Vertex from the path mesh may belong to multiple | |
| * MonotonePolys, so the original Vertices cannot be re-used. | |
| */ | |
| struct GrTriangulator::Vertex | |
| { | |
| Vertex(const Vec2D& point, uint8_t alpha) : | |
| fPoint(point), | |
| fPrev(nullptr), | |
| fNext(nullptr), | |
| fFirstEdgeAbove(nullptr), | |
| fLastEdgeAbove(nullptr), | |
| fFirstEdgeBelow(nullptr), | |
| fLastEdgeBelow(nullptr), | |
| fLeftEnclosingEdge(nullptr), | |
| fRightEnclosingEdge(nullptr), | |
| fPartner(nullptr), | |
| fAlpha(alpha), | |
| fSynthetic(false) | |
| #if TRIANGULATOR_LOGGING | |
| , | |
| fID(-1.0f) | |
| #endif | |
| {} | |
| Vec2D fPoint; // Vertex position | |
| Vertex* fPrev; // Linked list of contours, then Y-sorted vertices. | |
| Vertex* fNext; // " | |
| Edge* fFirstEdgeAbove; // Linked list of edges above this vertex. | |
| Edge* fLastEdgeAbove; // " | |
| Edge* fFirstEdgeBelow; // Linked list of edges below this vertex. | |
| Edge* fLastEdgeBelow; // " | |
| Edge* fLeftEnclosingEdge; // Nearest edge in the AEL left of this vertex. | |
| Edge* fRightEnclosingEdge; // Nearest edge in the AEL right of this vertex. | |
| Vertex* fPartner; // Corresponding inner or outer vertex (for AA). | |
| uint8_t fAlpha; | |
| bool fSynthetic; // Is this a synthetic vertex? | |
| #if TRIANGULATOR_LOGGING | |
| float fID; // Identifier used for logging. | |
| #endif | |
| bool isConnected() const { return this->fFirstEdgeAbove || this->fFirstEdgeBelow; } | |
| }; | |
| struct GrTriangulator::VertexList | |
| { | |
| VertexList() : fHead(nullptr), fTail(nullptr) {} | |
| VertexList(Vertex* head, Vertex* tail) : fHead(head), fTail(tail) {} | |
| Vertex* fHead; | |
| Vertex* fTail; | |
| void insert(Vertex* v, Vertex* prev, Vertex* next); | |
| void append(Vertex* v) { insert(v, fTail, nullptr); } | |
| void append(const VertexList& list) | |
| { | |
| if (!list.fHead) | |
| { | |
| return; | |
| } | |
| if (fTail) | |
| { | |
| fTail->fNext = list.fHead; | |
| list.fHead->fPrev = fTail; | |
| } | |
| else | |
| { | |
| fHead = list.fHead; | |
| } | |
| fTail = list.fTail; | |
| } | |
| void prepend(Vertex* v) { insert(v, nullptr, fHead); } | |
| void remove(Vertex* v); | |
| void close() | |
| { | |
| if (fHead && fTail) | |
| { | |
| fTail->fNext = fHead; | |
| fHead->fPrev = fTail; | |
| } | |
| } | |
| #if TRIANGULATOR_LOGGING | |
| void dump() const; | |
| #endif | |
| }; | |
| // A line equation in implicit form. fA * x + fB * y + fC = 0, for all points (x, y) on the line. | |
| struct GrTriangulator::Line | |
| { | |
| Line(double a, double b, double c) : fA(a), fB(b), fC(c) {} | |
| Line(Vertex* p, Vertex* q) : Line(p->fPoint, q->fPoint) {} | |
| Line(const Vec2D& p, const Vec2D& q) : | |
| fA(static_cast<double>(q.y) - p.y) // a = dY | |
| , | |
| fB(static_cast<double>(p.x) - q.x) // b = -dX | |
| , | |
| fC(static_cast<double>(p.y) * q.x - // c = cross(q, p) | |
| static_cast<double>(p.x) * q.y) | |
| {} | |
| double dist(const Vec2D& p) const { return fA * p.x + fB * p.y + fC; } | |
| Line operator*(double v) const { return Line(fA * v, fB * v, fC * v); } | |
| double magSq() const { return fA * fA + fB * fB; } | |
| void normalize() | |
| { | |
| double len = sqrt(this->magSq()); | |
| if (len == 0.0) | |
| { | |
| return; | |
| } | |
| double scale = 1.0f / len; | |
| fA *= scale; | |
| fB *= scale; | |
| fC *= scale; | |
| } | |
| bool nearParallel(const Line& o) const | |
| { | |
| return fabs(o.fA - fA) < 0.00001 && fabs(o.fB - fB) < 0.00001; | |
| } | |
| #if 0 | |
| // Compute the intersection of two (infinite) Lines. | |
| bool intersect(const Line& other, Vec2D* point) const; | |
| #endif | |
| double fA, fB, fC; | |
| }; | |
| /** | |
| * An Edge joins a top Vertex to a bottom Vertex. Edge ordering for the list of "edges above" and | |
| * "edge below" a vertex as well as for the active edge list is handled by isLeftOf()/isRightOf(). | |
| * Note that an Edge will give occasionally dist() != 0 for its own endpoints (because floating | |
| * point). For speed, that case is only tested by the callers that require it (e.g., | |
| * rewind_if_necessary()). Edges also handle checking for intersection with other edges. | |
| * Currently, this converts the edges to the parametric form, in order to avoid doing a division | |
| * until an intersection has been confirmed. This is slightly slower in the "found" case, but | |
| * a lot faster in the "not found" case. | |
| * | |
| * The coefficients of the line equation stored in double precision to avoid catastrophic | |
| * cancellation in the isLeftOf() and isRightOf() checks. Using doubles ensures that the result is | |
| * correct in float, since it's a polynomial of degree 2. The intersect() function, being | |
| * degree 5, is still subject to catastrophic cancellation. We deal with that by assuming its | |
| * output may be incorrect, and adjusting the mesh topology to match (see comment at the top of | |
| * this file). | |
| */ | |
| struct GrTriangulator::Edge | |
| { | |
| Edge(Vertex* top, Vertex* bottom, int winding, EdgeType type) : | |
| fWinding(winding), | |
| fTop(top), | |
| fBottom(bottom), | |
| fType(type), | |
| fLeft(nullptr), | |
| fRight(nullptr), | |
| fPrevEdgeAbove(nullptr), | |
| fNextEdgeAbove(nullptr), | |
| fPrevEdgeBelow(nullptr), | |
| fNextEdgeBelow(nullptr), | |
| fLeftPoly(nullptr), | |
| fRightPoly(nullptr), | |
| fLeftPolyPrev(nullptr), | |
| fLeftPolyNext(nullptr), | |
| fRightPolyPrev(nullptr), | |
| fRightPolyNext(nullptr), | |
| fUsedInLeftPoly(false), | |
| fUsedInRightPoly(false), | |
| fLine(top, bottom) | |
| {} | |
| int fWinding; // 1 == edge goes downward; -1 = edge goes upward. | |
| Vertex* fTop; // The top vertex in vertex-sort-order (sweep_lt). | |
| Vertex* fBottom; // The bottom vertex in vertex-sort-order. | |
| EdgeType fType; | |
| Edge* fLeft; // The linked list of edges in the active edge list. | |
| Edge* fRight; // " | |
| Edge* fPrevEdgeAbove; // The linked list of edges in the bottom Vertex's "edges above". | |
| Edge* fNextEdgeAbove; // " | |
| Edge* fPrevEdgeBelow; // The linked list of edges in the top Vertex's "edges below". | |
| Edge* fNextEdgeBelow; // " | |
| Poly* fLeftPoly; // The Poly to the left of this edge, if any. | |
| Poly* fRightPoly; // The Poly to the right of this edge, if any. | |
| Edge* fLeftPolyPrev; | |
| Edge* fLeftPolyNext; | |
| Edge* fRightPolyPrev; | |
| Edge* fRightPolyNext; | |
| bool fUsedInLeftPoly; | |
| bool fUsedInRightPoly; | |
| Line fLine; | |
| double dist(const Vec2D& p) const | |
| { | |
| // Coerce points coincident with the vertices to have dist = 0, since converting from | |
| // a double intersection point back to float storage might construct a point that's no | |
| // longer on the ideal line. | |
| return (p == fTop->fPoint || p == fBottom->fPoint) ? 0.0 : fLine.dist(p); | |
| } | |
| bool isRightOf(const Vertex& v) const { return this->dist(v.fPoint) < 0.0; } | |
| bool isLeftOf(const Vertex& v) const { return this->dist(v.fPoint) > 0.0; } | |
| void recompute() { fLine = Line(fTop, fBottom); } | |
| void insertAbove(Vertex*, const Comparator&); | |
| void insertBelow(Vertex*, const Comparator&); | |
| void disconnect(); | |
| bool intersect(const Edge& other, Vec2D* p, uint8_t* alpha = nullptr) const; | |
| }; | |
| struct GrTriangulator::EdgeList | |
| { | |
| EdgeList() : fHead(nullptr), fTail(nullptr) {} | |
| Edge* fHead; | |
| Edge* fTail; | |
| void insert(Edge* edge, Edge* prev, Edge* next); | |
| void insert(Edge* edge, Edge* prev); | |
| void append(Edge* e) { insert(e, fTail, nullptr); } | |
| void remove(Edge* edge); | |
| void removeAll() | |
| { | |
| while (fHead) | |
| { | |
| this->remove(fHead); | |
| } | |
| } | |
| void close() | |
| { | |
| if (fHead && fTail) | |
| { | |
| fTail->fRight = fHead; | |
| fHead->fLeft = fTail; | |
| } | |
| } | |
| bool contains(Edge* edge) const { return edge->fLeft || edge->fRight || fHead == edge; } | |
| }; | |
| struct GrTriangulator::MonotonePoly | |
| { | |
| MonotonePoly(Edge* edge, Side side, int winding) : | |
| fSide(side), | |
| fFirstEdge(nullptr), | |
| fLastEdge(nullptr), | |
| fPrev(nullptr), | |
| fNext(nullptr), | |
| fWinding(winding) | |
| { | |
| this->addEdge(edge); | |
| } | |
| Side fSide; | |
| Edge* fFirstEdge; | |
| Edge* fLastEdge; | |
| MonotonePoly* fPrev; | |
| MonotonePoly* fNext; | |
| int fWinding; | |
| void addEdge(Edge*); | |
| }; | |
| struct GrTriangulator::Poly | |
| { | |
| Poly(Vertex* v, int winding); | |
| Poly* addEdge(Edge* e, Side side, GrTriangulator*); | |
| Vertex* lastVertex() const { return fTail ? fTail->fLastEdge->fBottom : fFirstVertex; } | |
| Vertex* fFirstVertex; | |
| int fWinding; | |
| MonotonePoly* fHead; | |
| MonotonePoly* fTail; | |
| Poly* fNext; | |
| Poly* fPartner; | |
| int fCount; | |
| #if TRIANGULATOR_LOGGING | |
| int fID; | |
| #endif | |
| }; | |
| } // namespace rive | |
| #endif // SK_ENABLE_OPTIMIZE_SIZE | |
| #endif // GrTriangulator_DEFINED |