| /* | |
| * Copyright 2022 Rive | |
| */ | |
| #define TESS_TEXTURE_WIDTH float(2048) | |
| #define TESS_TEXTURE_WIDTH_LOG2 11 | |
| #define GRAD_TEXTURE_WIDTH float(512) | |
| #define GRAD_TEXTURE_INVERSE_WIDTH float(0.001953125) | |
| // Number of standard deviations on either side of the middle of the feather | |
| // texture. The feather texture integrates the normal distribution from | |
| // -FEATHER_TEXTURE_STDDEVS to +FEATHER_TEXTURE_STDDEVS in the domain x=0..1. | |
| #define FEATHER_TEXTURE_STDDEVS float(3) | |
| // Indices of function tables in the feather texture1d array. | |
| // NOTE: This will be a texture2d if texture1d isn't supported. | |
| #define FEATHER_FUNCTION_ARRAY_INDEX 0 | |
| #define FEATHER_INVERSE_FUNCTION_ARRAY_INDEX 1 | |
| #define FEATHER_TEXTURE_1D_ARRAY_LENGTH 2 | |
| // Number of additional tessellation "helper" vertices that need to be allocated | |
| // for a feather join. | |
| #define FEATHER_JOIN_HELPER_VERTEX_COUNT 3u | |
| // Amount to increase "joinSegmentCount" in a feather join so the number of | |
| // literal vertices allocated increases by FEATHER_JOIN_HELPER_VERTEX_COUNT. | |
| #define FEATHER_JOIN_HELPER_SEGMENT_COUNT \ | |
| (FEATHER_JOIN_HELPER_VERTEX_COUNT + 1u) | |
| // Feather joins are split into a backward and forward section. Both sections | |
| // need at least one segment, thus a minimum of 2 (plus helper vertices). | |
| #define FEATHER_JOIN_MIN_SEGMENT_COUNT (2u + FEATHER_JOIN_HELPER_SEGMENT_COUNT) | |
| // Width to use for a texture that emulates a storage buffer. | |
| // | |
| // Minimize width since the texture needs to be updated in entire rows from the | |
| // resource buffer. Since these only serve paths and contours, both of those are | |
| // limited to 16-bit indices, 2048 is the min specified texture size in ES3, and | |
| // no path buffer uses more than 4 texels, we can safely use a width of 128. | |
| #define STORAGE_TEXTURE_WIDTH 128 | |
| #define STORAGE_TEXTURE_SHIFT_Y 7 | |
| #define STORAGE_TEXTURE_MASK_X 0x7fu | |
| // Flags that state whether/how we need to render solid-color borders to the | |
| // left and/or right side of a GradientSpan. (Borders of complex gradients | |
| // stretch all the way to the left/right edges of the texture, whereas borders | |
| // of simple gradients just need to stretch 1px to the left/right of the | |
| // span.) | |
| #define GRAD_SPAN_FLAG_LEFT_BORDER 0x80000000u | |
| #define GRAD_SPAN_FLAG_RIGHT_BORDER 0x40000000u | |
| #define GRAD_SPAN_FLAG_COMPLEX_BORDER 0x20000000u | |
| #define GRAD_SPAN_FLAGS_MASK \ | |
| (GRAD_SPAN_FLAG_LEFT_BORDER | GRAD_SPAN_FLAG_RIGHT_BORDER | \ | |
| GRAD_SPAN_FLAG_COMPLEX_BORDER) | |
| // Tells shaders that a cubic should actually be drawn as the single, non-AA | |
| // triangle: [p0, p1, p3]. This is used to squeeze in more rare triangles, like | |
| // "grout" triangles from self intersections on interior triangulation, where it | |
| // wouldn't be worth it to put them in their own dedicated draw call. | |
| #define RETROFITTED_TRIANGLE_CONTOUR_FLAG (1u << 31u) | |
| // Skip bit 30 in the contour flags so that it's always 0. This ensures we never | |
| // generate special NaN/Inf floating point values in contourIDWithFlags, which | |
| // may confuse the driver. | |
| #define NEVER_USED_CONTOUR_FLAG (1u << 30u) | |
| // Tells the tessellation shader to re-run Wang's formula on the given curve, | |
| // figure out how many segments it actually needs, and make any excess segments | |
| // degenerate by co-locating their vertices at T=0. (Used on the "outerCurve" | |
| // patches that are drawn with interior triangulations.) | |
| #define CULL_EXCESS_TESSELLATION_SEGMENTS_CONTOUR_FLAG (1u << 29u) | |
| // Flags for specifying the join type. | |
| #define JOIN_TYPE_MASK (7u << 26u) | |
| #define MITER_CLIP_JOIN_CONTOUR_FLAG (5u << 26u) | |
| #define MITER_REVERT_JOIN_CONTOUR_FLAG (4u << 26u) | |
| #define BEVEL_JOIN_CONTOUR_FLAG (3u << 26u) | |
| #define ROUND_JOIN_CONTOUR_FLAG (2u << 26u) | |
| #define FEATHER_JOIN_CONTOUR_FLAG (1u << 26u) | |
| // When a join is being used to emulate a stroke cap, the shader emits | |
| // additional vertices at T=0 and T=1 for round joins, and changes the miter | |
| // limit to 1 for miter-clip joins. | |
| #define EMULATED_STROKE_CAP_CONTOUR_FLAG (1u << 25u) | |
| // Flip the sign on interpolated fragment coverage for fills. Ignored on | |
| // strokes. This is used when reversing the winding direction of a path. | |
| #define NEGATE_PATH_FILL_COVERAGE_FLAG (1u << 24u) | |
| // Internal contour flags. | |
| #define MIRRORED_CONTOUR_CONTOUR_FLAG (1u << 23u) | |
| #define JOIN_TANGENT_0_CONTOUR_FLAG (1u << 22u) | |
| #define JOIN_TANGENT_INNER_CONTOUR_FLAG (1u << 21u) | |
| #define LEFT_JOIN_CONTOUR_FLAG (1u << 20u) | |
| #define RIGHT_JOIN_CONTOUR_FLAG (1u << 19u) | |
| #define CONTOUR_ID_MASK 0xffffu | |
| // This is guaranteed to not collide with a neighboring contour ID. | |
| #define INVALID_CONTOUR_ID_WITH_FLAGS 0u | |
| // Says which part of the patch a vertex belongs to. | |
| #define STROKE_VERTEX 0 | |
| #define FAN_VERTEX 1 | |
| #define FAN_MIDPOINT_VERTEX 2 | |
| // Says which part of the patch a vertex belongs to. | |
| #define STROKE_VERTEX 0 | |
| #define FAN_VERTEX 1 | |
| #define FAN_MIDPOINT_VERTEX 2 | |
| // Mirrors pls::PaintType. | |
| #define CLIP_UPDATE_PAINT_TYPE 0u | |
| #define SOLID_COLOR_PAINT_TYPE 1u | |
| #define LINEAR_GRADIENT_PAINT_TYPE 2u | |
| #define RADIAL_GRADIENT_PAINT_TYPE 3u | |
| #define IMAGE_PAINT_TYPE 4u | |
| // Paint flags, found in the x-component value of @paintBuffer. | |
| #define PAINT_FLAG_NON_ZERO_FILL 0x100u | |
| #define PAINT_FLAG_EVEN_ODD_FILL 0x200u | |
| #define PAINT_FLAG_HAS_CLIP_RECT 0x400u | |
| // PLS draw resources are either updated per flush or per draw. They go into set | |
| // 0 or set 1, depending on how often they are updated. | |
| #define PER_FLUSH_BINDINGS_SET 0 | |
| #define PER_DRAW_BINDINGS_SET 1 | |
| // Index at which we access each resource. | |
| // (Enumerate buffers first because GLES allows a hard limit on buffer index | |
| // bindings as low as 7.) | |
| #define FLUSH_UNIFORM_BUFFER_IDX 0 | |
| #define PATH_BASE_INSTANCE_UNIFORM_BUFFER_IDX 1 | |
| #define IMAGE_DRAW_UNIFORM_BUFFER_IDX 2 | |
| #define PATH_BUFFER_IDX 3 | |
| #define PAINT_BUFFER_IDX 4 | |
| #define PAINT_AUX_BUFFER_IDX 5 | |
| #define CONTOUR_BUFFER_IDX 6 | |
| // Coverage buffer used in coverageAtomic mode. | |
| #define COVERAGE_BUFFER_IDX 7 | |
| #define TESS_VERTEX_TEXTURE_IDX 8 | |
| #define GRAD_TEXTURE_IDX 9 | |
| #define FEATHER_TEXTURE_IDX 10 | |
| #define ATLAS_TEXTURE_IDX 11 | |
| #define IMAGE_TEXTURE_IDX 12 | |
| #define IMAGE_SAMPLER_IDX 13 | |
| #define DST_COLOR_TEXTURE_IDX 14 | |
| #define DEFAULT_BINDINGS_SET_SIZE 15 | |
| // Metal doesn't allow us to bind buffers index 0 or 1. Offset them by 2. | |
| #define METAL_BUFFER_IDX(IDX) (2 + IDX) | |
| // Samplers are accessed at the same index as their corresponding texture, so we | |
| // put them in a separate binding set. | |
| #define IMMUTABLE_SAMPLER_BINDINGS_SET 2 | |
| // PLS textures are accessed at the same index as their PLS planes, so we put | |
| // them in a separate binding set. | |
| #define PLS_TEXTURE_BINDINGS_SET 3 | |
| #define BINDINGS_SET_COUNT 4 | |
| // Index of each pixel local storage plane. | |
| #define COLOR_PLANE_IDX 0 | |
| #define CLIP_PLANE_IDX 1 | |
| #define SCRATCH_COLOR_PLANE_IDX 2 | |
| #define COVERAGE_PLANE_IDX 3 | |
| #define PLS_PLANE_COUNT 4 | |
| // Rive has a hard-coded miter limit of 4 in the editor and all runtimes. | |
| #define RIVE_MITER_LIMIT float(4) | |
| // acos(1/4), because the miter limit is 4. | |
| #define MITER_ANGLE_LIMIT float(1.318116071652817965746) | |
| // Raw bit representation of the largest denormalized fp16 value. We offset all | |
| // (1-based) path IDs by this value in order to avoid denorms, which have been | |
| // empirically unreliable on Android as ID values. | |
| #define MAX_DENORM_F16 1023u | |
| // Blend modes. Mirrors rive::BlendMode, but 0-based and contiguous for tighter | |
| // packing. | |
| #define BLEND_SRC_OVER 0u | |
| #define BLEND_MODE_SCREEN 1u | |
| #define BLEND_MODE_OVERLAY 2u | |
| #define BLEND_MODE_DARKEN 3u | |
| #define BLEND_MODE_LIGHTEN 4u | |
| #define BLEND_MODE_COLORDODGE 5u | |
| #define BLEND_MODE_COLORBURN 6u | |
| #define BLEND_MODE_HARDLIGHT 7u | |
| #define BLEND_MODE_SOFTLIGHT 8u | |
| #define BLEND_MODE_DIFFERENCE 9u | |
| #define BLEND_MODE_EXCLUSION 10u | |
| #define BLEND_MODE_MULTIPLY 11u | |
| #define BLEND_MODE_HUE 12u | |
| #define BLEND_MODE_SATURATION 13u | |
| #define BLEND_MODE_COLOR 14u | |
| #define BLEND_MODE_LUMINOSITY 15u | |
| // Fixed-point coverage values for atomic mode. | |
| // Atomic mode uses 6:11 fixed point, so the winding number breaks if a shape | |
| // has more than 32 levels of self overlap in either winding direction at any | |
| // point. | |
| #define FIXED_COVERAGE_PRECISION float(2048) | |
| #define FIXED_COVERAGE_INVERSE_PRECISION float(0.00048828125) | |
| #define FIXED_COVERAGE_ZERO float(1 << 16) | |
| #define FIXED_COVERAGE_ZERO_UINT (1u << 16) | |
| #define FIXED_COVERAGE_ONE (FIXED_COVERAGE_PRECISION + FIXED_COVERAGE_ZERO) | |
| #define FIXED_COVERAGE_BIT_COUNT 17u | |
| #define FIXED_COVERAGE_MASK 0x1ffffu | |
| // Fixed-point coverage values for clockwiseAtomic mode. | |
| // clockwiseAtomic mode uses 6:11 fixed point, so the winding number breaks if a | |
| // shape has more than 32 levels of self overlap in either winding direction at | |
| // any point. | |
| #define CLOCKWISE_COVERAGE_BIT_COUNT 17u | |
| #define CLOCKWISE_COVERAGE_MASK 0x1ffffu | |
| #define CLOCKWISE_COVERAGE_PRECISION float(2048) | |
| #define CLOCKWISE_COVERAGE_INVERSE_PRECISION float(0.00048828125) | |
| #define CLOCKWISE_FILL_ZERO_VALUE (1u << 16) | |
| // Vendor IDs for driver workarounds. | |
| #define VULKAN_VENDOR_AMD 0x1002u | |
| #define VULKAN_VENDOR_IMG_TEC 0x1010u | |
| #define VULKAN_VENDOR_NVIDIA 0x10DEu | |
| #define VULKAN_VENDOR_ARM 0x13B5u | |
| #define VULKAN_VENDOR_QUALCOMM 0x5143u | |
| #define VULKAN_VENDOR_INTEL 0x8086u | |
| // Indices for SPIRV specialization constants (used in lieu of #defines in | |
| // Vulkan.) | |
| #define CLIPPING_SPECIALIZATION_IDX 0 | |
| #define CLIP_RECT_SPECIALIZATION_IDX 1 | |
| #define ADVANCED_BLEND_SPECIALIZATION_IDX 2 | |
| #define FEATHER_SPECIALIZATION_IDX 3 | |
| #define EVEN_ODD_SPECIALIZATION_IDX 4 | |
| #define NESTED_CLIPPING_SPECIALIZATION_IDX 5 | |
| #define HSL_BLEND_MODES_SPECIALIZATION_IDX 6 | |
| #define CLOCKWISE_FILL_SPECIALIZATION_IDX 7 | |
| #define BORROWED_COVERAGE_PREPASS_SPECIALIZATION_IDX 8 | |
| #define VULKAN_VENDOR_ID_SPECIALIZATION_IDX 9 | |
| #define SPECIALIZATION_COUNT 10 |