blob: 64f9880482d31d41ca359c3170fef63753f586f8 [file] [log] [blame]
/*
* MIPS DSPr2 optimizations for libjpeg-turbo
*
* Copyright (C) 2013, MIPS Technologies, Inc., California.
* All Rights Reserved.
* Authors: Teodora Novkovic (teodora.novkovic@imgtec.com)
* Darko Laus (darko.laus@imgtec.com)
* This software is provided 'as-is', without any express or implied
* warranty. In no event will the authors be held liable for any damages
* arising from the use of this software.
*
* Permission is granted to anyone to use this software for any purpose,
* including commercial applications, and to alter it and redistribute it
* freely, subject to the following restrictions:
*
* 1. The origin of this software must not be misrepresented; you must not
* claim that you wrote the original software. If you use this software
* in a product, an acknowledgment in the product documentation would be
* appreciated but is not required.
* 2. Altered source versions must be plainly marked as such, and must not be
* misrepresented as being the original software.
* 3. This notice may not be removed or altered from any source distribution.
*/
#define zero $0
#define AT $1
#define v0 $2
#define v1 $3
#define a0 $4
#define a1 $5
#define a2 $6
#define a3 $7
#define t0 $8
#define t1 $9
#define t2 $10
#define t3 $11
#define t4 $12
#define t5 $13
#define t6 $14
#define t7 $15
#define s0 $16
#define s1 $17
#define s2 $18
#define s3 $19
#define s4 $20
#define s5 $21
#define s6 $22
#define s7 $23
#define t8 $24
#define t9 $25
#define k0 $26
#define k1 $27
#define gp $28
#define sp $29
#define fp $30
#define s8 $30
#define ra $31
#define f0 $f0
#define f1 $f1
#define f2 $f2
#define f3 $f3
#define f4 $f4
#define f5 $f5
#define f6 $f6
#define f7 $f7
#define f8 $f8
#define f9 $f9
#define f10 $f10
#define f11 $f11
#define f12 $f12
#define f13 $f13
#define f14 $f14
#define f15 $f15
#define f16 $f16
#define f17 $f17
#define f18 $f18
#define f19 $f19
#define f20 $f20
#define f21 $f21
#define f22 $f22
#define f23 $f23
#define f24 $f24
#define f25 $f25
#define f26 $f26
#define f27 $f27
#define f28 $f28
#define f29 $f29
#define f30 $f30
#define f31 $f31
/*
* LEAF_MIPS32R2 - declare leaf routine for MIPS32r2
*/
#define LEAF_MIPS32R2(symbol) \
.globl symbol; \
.align 2; \
.type symbol, @function; \
.ent symbol, 0; \
symbol: .frame sp, 0, ra; \
.set push; \
.set arch=mips32r2; \
.set noreorder; \
.set noat;
/*
* LEAF_MIPS_DSPR2 - declare leaf routine for MIPS DSPr2
*/
#define LEAF_MIPS_DSPR2(symbol) \
LEAF_MIPS32R2(symbol) \
.set dspr2;
/*
* END - mark end of function
*/
#define END(function) \
.set pop; \
.end function; \
.size function,.-function
/*
* Checks if stack offset is big enough for storing/restoring regs_num
* number of register to/from stack. Stack offset must be greater than
* or equal to the number of bytes needed for storing registers (regs_num*4).
* Since MIPS ABI allows usage of first 16 bytes of stack frame (this is
* preserved for input arguments of the functions, already stored in a0-a3),
* stack size can be further optimized by utilizing this space.
*/
.macro CHECK_STACK_OFFSET regs_num, stack_offset
.if \stack_offset < \regs_num * 4 - 16
.error "Stack offset too small."
.endif
.endm
/*
* Saves set of registers on stack. Maximum number of registers that
* can be saved on stack is limitted to 14 (a0-a3, v0-v1 and s0-s7).
* Stack offset is number of bytes that are added to stack pointer (sp)
* before registers are pushed in order to provide enough space on stack
* (offset must be multiple of 4, and must be big enough, as described by
* CHECK_STACK_OFFSET macro). This macro is intended to be used in
* combination with RESTORE_REGS_FROM_STACK macro. Example:
* SAVE_REGS_ON_STACK 4, v0, v1, s0, s1
* RESTORE_REGS_FROM_STACK 4, v0, v1, s0, s1
*/
.macro SAVE_REGS_ON_STACK stack_offset = 0, r1, \
r2 = 0, r3 = 0, r4 = 0, \
r5 = 0, r6 = 0, r7 = 0, \
r8 = 0, r9 = 0, r10 = 0, \
r11 = 0, r12 = 0, r13 = 0, \
r14 = 0
.if (\stack_offset < 0) || (\stack_offset - (\stack_offset / 4) * 4)
.error "Stack offset must be pozitive and multiple of 4."
.endif
.if \stack_offset != 0
addiu sp, sp, -\stack_offset
.endif
sw \r1, 0(sp)
.if \r2 != 0
sw \r2, 4(sp)
.endif
.if \r3 != 0
sw \r3, 8(sp)
.endif
.if \r4 != 0
sw \r4, 12(sp)
.endif
.if \r5 != 0
CHECK_STACK_OFFSET 5, \stack_offset
sw \r5, 16(sp)
.endif
.if \r6 != 0
CHECK_STACK_OFFSET 6, \stack_offset
sw \r6, 20(sp)
.endif
.if \r7 != 0
CHECK_STACK_OFFSET 7, \stack_offset
sw \r7, 24(sp)
.endif
.if \r8 != 0
CHECK_STACK_OFFSET 8, \stack_offset
sw \r8, 28(sp)
.endif
.if \r9 != 0
CHECK_STACK_OFFSET 9, \stack_offset
sw \r9, 32(sp)
.endif
.if \r10 != 0
CHECK_STACK_OFFSET 10, \stack_offset
sw \r10, 36(sp)
.endif
.if \r11 != 0
CHECK_STACK_OFFSET 11, \stack_offset
sw \r11, 40(sp)
.endif
.if \r12 != 0
CHECK_STACK_OFFSET 12, \stack_offset
sw \r12, 44(sp)
.endif
.if \r13 != 0
CHECK_STACK_OFFSET 13, \stack_offset
sw \r13, 48(sp)
.endif
.if \r14 != 0
CHECK_STACK_OFFSET 14, \stack_offset
sw \r14, 52(sp)
.endif
.endm
/*
* Restores set of registers from stack. Maximum number of registers that
* can be restored from stack is limitted to 14 (a0-a3, v0-v1 and s0-s7).
* Stack offset is number of bytes that are added to stack pointer (sp)
* after registers are restored (offset must be multiple of 4, and must
* be big enough, as described by CHECK_STACK_OFFSET macro). This macro is
* intended to be used in combination with RESTORE_REGS_FROM_STACK macro.
* Example:
* SAVE_REGS_ON_STACK 4, v0, v1, s0, s1
* RESTORE_REGS_FROM_STACK 4, v0, v1, s0, s1
*/
.macro RESTORE_REGS_FROM_STACK stack_offset = 0, r1, \
r2 = 0, r3 = 0, r4 = 0, \
r5 = 0, r6 = 0, r7 = 0, \
r8 = 0, r9 = 0, r10 = 0, \
r11 = 0, r12 = 0, r13 = 0, \
r14 = 0
.if (\stack_offset < 0) || (\stack_offset - (\stack_offset/4)*4)
.error "Stack offset must be pozitive and multiple of 4."
.endif
lw \r1, 0(sp)
.if \r2 != 0
lw \r2, 4(sp)
.endif
.if \r3 != 0
lw \r3, 8(sp)
.endif
.if \r4 != 0
lw \r4, 12(sp)
.endif
.if \r5 != 0
CHECK_STACK_OFFSET 5, \stack_offset
lw \r5, 16(sp)
.endif
.if \r6 != 0
CHECK_STACK_OFFSET 6, \stack_offset
lw \r6, 20(sp)
.endif
.if \r7 != 0
CHECK_STACK_OFFSET 7, \stack_offset
lw \r7, 24(sp)
.endif
.if \r8 != 0
CHECK_STACK_OFFSET 8, \stack_offset
lw \r8, 28(sp)
.endif
.if \r9 != 0
CHECK_STACK_OFFSET 9, \stack_offset
lw \r9, 32(sp)
.endif
.if \r10 != 0
CHECK_STACK_OFFSET 10, \stack_offset
lw \r10, 36(sp)
.endif
.if \r11 != 0
CHECK_STACK_OFFSET 11, \stack_offset
lw \r11, 40(sp)
.endif
.if \r12 != 0
CHECK_STACK_OFFSET 12, \stack_offset
lw \r12, 44(sp)
.endif
.if \r13 != 0
CHECK_STACK_OFFSET 13, \stack_offset
lw \r13, 48(sp)
.endif
.if \r14 != 0
CHECK_STACK_OFFSET 14, \stack_offset
lw \r14, 52(sp)
.endif
.if \stack_offset != 0
addiu sp, sp, \stack_offset
.endif
.endm