| // Copyright 2017 The Abseil Authors. | |
| // | |
| // Licensed under the Apache License, Version 2.0 (the "License"); | |
| // you may not use this file except in compliance with the License. | |
| // You may obtain a copy of the License at | |
| // | |
| // http://www.apache.org/licenses/LICENSE-2.0 | |
| // | |
| // Unless required by applicable law or agreed to in writing, software | |
| // distributed under the License is distributed on an "AS IS" BASIS, | |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |
| // See the License for the specific language governing permissions and | |
| // limitations under the License. | |
| // The implementation of the absl::Duration class, which is declared in | |
| // //absl/time.h. This class behaves like a numeric type; it has no public | |
| // methods and is used only through the operators defined here. | |
| // | |
| // Implementation notes: | |
| // | |
| // An absl::Duration is represented as | |
| // | |
| // rep_hi_ : (int64_t) Whole seconds | |
| // rep_lo_ : (uint32_t) Fractions of a second | |
| // | |
| // The seconds value (rep_hi_) may be positive or negative as appropriate. | |
| // The fractional seconds (rep_lo_) is always a positive offset from rep_hi_. | |
| // The API for Duration guarantees at least nanosecond resolution, which | |
| // means rep_lo_ could have a max value of 1B - 1 if it stored nanoseconds. | |
| // However, to utilize more of the available 32 bits of space in rep_lo_, | |
| // we instead store quarters of a nanosecond in rep_lo_ resulting in a max | |
| // value of 4B - 1. This allows us to correctly handle calculations like | |
| // 0.5 nanos + 0.5 nanos = 1 nano. The following example shows the actual | |
| // Duration rep using quarters of a nanosecond. | |
| // | |
| // 2.5 sec = {rep_hi_=2, rep_lo_=2000000000} // lo = 4 * 500000000 | |
| // -2.5 sec = {rep_hi_=-3, rep_lo_=2000000000} | |
| // | |
| // Infinite durations are represented as Durations with the rep_lo_ field set | |
| // to all 1s. | |
| // | |
| // +InfiniteDuration: | |
| // rep_hi_ : kint64max | |
| // rep_lo_ : ~0U | |
| // | |
| // -InfiniteDuration: | |
| // rep_hi_ : kint64min | |
| // rep_lo_ : ~0U | |
| // | |
| // Arithmetic overflows/underflows to +/- infinity and saturates. | |
| #include <algorithm> | |
| #include <cassert> | |
| #include <cctype> | |
| #include <cerrno> | |
| #include <cmath> | |
| #include <cstdint> | |
| #include <cstdlib> | |
| #include <cstring> | |
| #include <ctime> | |
| #include <functional> | |
| #include <limits> | |
| #include <string> | |
| #include "absl/base/casts.h" | |
| #include "absl/numeric/int128.h" | |
| #include "absl/time/time.h" | |
| namespace absl { | |
| namespace { | |
| using time_internal::kTicksPerNanosecond; | |
| using time_internal::kTicksPerSecond; | |
| constexpr int64_t kint64max = std::numeric_limits<int64_t>::max(); | |
| constexpr int64_t kint64min = std::numeric_limits<int64_t>::min(); | |
| // Can't use std::isinfinite() because it doesn't exist on windows. | |
| inline bool IsFinite(double d) { | |
| return d != std::numeric_limits<double>::infinity() && | |
| d != -std::numeric_limits<double>::infinity(); | |
| } | |
| // Can't use std::round() because it is only available in C++11. | |
| // Note that we ignore the possibility of floating-point over/underflow. | |
| template <typename Double> | |
| inline double Round(Double d) { | |
| return d < 0 ? std::ceil(d - 0.5) : std::floor(d + 0.5); | |
| } | |
| // *sec may be positive or negative. *ticks must be in the range | |
| // -kTicksPerSecond < *ticks < kTicksPerSecond. If *ticks is negative it | |
| // will be normalized to a positive value by adjusting *sec accordingly. | |
| inline void NormalizeTicks(int64_t* sec, int64_t* ticks) { | |
| if (*ticks < 0) { | |
| --*sec; | |
| *ticks += kTicksPerSecond; | |
| } | |
| } | |
| // Makes a uint128 from the absolute value of the given scalar. | |
| inline uint128 MakeU128(int64_t a) { | |
| uint128 u128 = 0; | |
| if (a < 0) { | |
| ++u128; | |
| ++a; // Makes it safe to negate 'a' | |
| a = -a; | |
| } | |
| u128 += static_cast<uint64_t>(a); | |
| return u128; | |
| } | |
| // Makes a uint128 count of ticks out of the absolute value of the Duration. | |
| inline uint128 MakeU128Ticks(Duration d) { | |
| int64_t rep_hi = time_internal::GetRepHi(d); | |
| uint32_t rep_lo = time_internal::GetRepLo(d); | |
| if (rep_hi < 0) { | |
| ++rep_hi; | |
| rep_hi = -rep_hi; | |
| rep_lo = kTicksPerSecond - rep_lo; | |
| } | |
| uint128 u128 = static_cast<uint64_t>(rep_hi); | |
| u128 *= static_cast<uint64_t>(kTicksPerSecond); | |
| u128 += rep_lo; | |
| return u128; | |
| } | |
| // Breaks a uint128 of ticks into a Duration. | |
| inline Duration MakeDurationFromU128(uint128 u128, bool is_neg) { | |
| int64_t rep_hi; | |
| uint32_t rep_lo; | |
| const uint64_t h64 = Uint128High64(u128); | |
| const uint64_t l64 = Uint128Low64(u128); | |
| if (h64 == 0) { // fastpath | |
| const uint64_t hi = l64 / kTicksPerSecond; | |
| rep_hi = static_cast<int64_t>(hi); | |
| rep_lo = static_cast<uint32_t>(l64 - hi * kTicksPerSecond); | |
| } else { | |
| // kMaxRepHi64 is the high 64 bits of (2^63 * kTicksPerSecond). | |
| // Any positive tick count whose high 64 bits are >= kMaxRepHi64 | |
| // is not representable as a Duration. A negative tick count can | |
| // have its high 64 bits == kMaxRepHi64 but only when the low 64 | |
| // bits are all zero, otherwise it is not representable either. | |
| const uint64_t kMaxRepHi64 = 0x77359400UL; | |
| if (h64 >= kMaxRepHi64) { | |
| if (is_neg && h64 == kMaxRepHi64 && l64 == 0) { | |
| // Avoid trying to represent -kint64min below. | |
| return time_internal::MakeDuration(kint64min); | |
| } | |
| return is_neg ? -InfiniteDuration() : InfiniteDuration(); | |
| } | |
| const uint128 kTicksPerSecond128 = static_cast<uint64_t>(kTicksPerSecond); | |
| const uint128 hi = u128 / kTicksPerSecond128; | |
| rep_hi = static_cast<int64_t>(Uint128Low64(hi)); | |
| rep_lo = | |
| static_cast<uint32_t>(Uint128Low64(u128 - hi * kTicksPerSecond128)); | |
| } | |
| if (is_neg) { | |
| rep_hi = -rep_hi; | |
| if (rep_lo != 0) { | |
| --rep_hi; | |
| rep_lo = kTicksPerSecond - rep_lo; | |
| } | |
| } | |
| return time_internal::MakeDuration(rep_hi, rep_lo); | |
| } | |
| // Convert between int64_t and uint64_t, preserving representation. This | |
| // allows us to do arithmetic in the unsigned domain, where overflow has | |
| // well-defined behavior. See operator+=() and operator-=(). | |
| // | |
| // C99 7.20.1.1.1, as referenced by C++11 18.4.1.2, says, "The typedef | |
| // name intN_t designates a signed integer type with width N, no padding | |
| // bits, and a two's complement representation." So, we can convert to | |
| // and from the corresponding uint64_t value using a bit cast. | |
| inline uint64_t EncodeTwosComp(int64_t v) { | |
| return absl::bit_cast<uint64_t>(v); | |
| } | |
| inline int64_t DecodeTwosComp(uint64_t v) { return absl::bit_cast<int64_t>(v); } | |
| // Note: The overflow detection in this function is done using greater/less *or | |
| // equal* because kint64max/min is too large to be represented exactly in a | |
| // double (which only has 53 bits of precision). In order to avoid assigning to | |
| // rep->hi a double value that is too large for an int64_t (and therefore is | |
| // undefined), we must consider computations that equal kint64max/min as a | |
| // double as overflow cases. | |
| inline bool SafeAddRepHi(double a_hi, double b_hi, Duration* d) { | |
| double c = a_hi + b_hi; | |
| if (c >= kint64max) { | |
| *d = InfiniteDuration(); | |
| return false; | |
| } | |
| if (c <= kint64min) { | |
| *d = -InfiniteDuration(); | |
| return false; | |
| } | |
| *d = time_internal::MakeDuration(c, time_internal::GetRepLo(*d)); | |
| return true; | |
| } | |
| // A functor that's similar to std::multiplies<T>, except this returns the max | |
| // T value instead of overflowing. This is only defined for uint128. | |
| template <typename Ignored> | |
| struct SafeMultiply { | |
| uint128 operator()(uint128 a, uint128 b) const { | |
| // b hi is always zero because it originated as an int64_t. | |
| assert(Uint128High64(b) == 0); | |
| // Fastpath to avoid the expensive overflow check with division. | |
| if (Uint128High64(a) == 0) { | |
| return (((Uint128Low64(a) | Uint128Low64(b)) >> 32) == 0) | |
| ? static_cast<uint128>(Uint128Low64(a) * Uint128Low64(b)) | |
| : a * b; | |
| } | |
| return b == 0 ? b : (a > kuint128max / b) ? kuint128max : a * b; | |
| } | |
| }; | |
| // Scales (i.e., multiplies or divides, depending on the Operation template) | |
| // the Duration d by the int64_t r. | |
| template <template <typename> class Operation> | |
| inline Duration ScaleFixed(Duration d, int64_t r) { | |
| const uint128 a = MakeU128Ticks(d); | |
| const uint128 b = MakeU128(r); | |
| const uint128 q = Operation<uint128>()(a, b); | |
| const bool is_neg = (time_internal::GetRepHi(d) < 0) != (r < 0); | |
| return MakeDurationFromU128(q, is_neg); | |
| } | |
| // Scales (i.e., multiplies or divides, depending on the Operation template) | |
| // the Duration d by the double r. | |
| template <template <typename> class Operation> | |
| inline Duration ScaleDouble(Duration d, double r) { | |
| Operation<double> op; | |
| double hi_doub = op(time_internal::GetRepHi(d), r); | |
| double lo_doub = op(time_internal::GetRepLo(d), r); | |
| double hi_int = 0; | |
| double hi_frac = std::modf(hi_doub, &hi_int); | |
| // Moves hi's fractional bits to lo. | |
| lo_doub /= kTicksPerSecond; | |
| lo_doub += hi_frac; | |
| double lo_int = 0; | |
| double lo_frac = std::modf(lo_doub, &lo_int); | |
| // Rolls lo into hi if necessary. | |
| int64_t lo64 = Round(lo_frac * kTicksPerSecond); | |
| Duration ans; | |
| if (!SafeAddRepHi(hi_int, lo_int, &ans)) return ans; | |
| int64_t hi64 = time_internal::GetRepHi(ans); | |
| if (!SafeAddRepHi(hi64, lo64 / kTicksPerSecond, &ans)) return ans; | |
| hi64 = time_internal::GetRepHi(ans); | |
| lo64 %= kTicksPerSecond; | |
| NormalizeTicks(&hi64, &lo64); | |
| return time_internal::MakeDuration(hi64, lo64); | |
| } | |
| // Tries to divide num by den as fast as possible by looking for common, easy | |
| // cases. If the division was done, the quotient is in *q and the remainder is | |
| // in *rem and true will be returned. | |
| inline bool IDivFastPath(const Duration num, const Duration den, int64_t* q, | |
| Duration* rem) { | |
| // Bail if num or den is an infinity. | |
| if (time_internal::IsInfiniteDuration(num) || | |
| time_internal::IsInfiniteDuration(den)) | |
| return false; | |
| int64_t num_hi = time_internal::GetRepHi(num); | |
| uint32_t num_lo = time_internal::GetRepLo(num); | |
| int64_t den_hi = time_internal::GetRepHi(den); | |
| uint32_t den_lo = time_internal::GetRepLo(den); | |
| if (den_hi == 0 && den_lo == kTicksPerNanosecond) { | |
| // Dividing by 1ns | |
| if (num_hi >= 0 && num_hi < (kint64max - kTicksPerSecond) / 1000000000) { | |
| *q = num_hi * 1000000000 + num_lo / kTicksPerNanosecond; | |
| *rem = time_internal::MakeDuration(0, num_lo % den_lo); | |
| return true; | |
| } | |
| } else if (den_hi == 0 && den_lo == 100 * kTicksPerNanosecond) { | |
| // Dividing by 100ns (common when converting to Universal time) | |
| if (num_hi >= 0 && num_hi < (kint64max - kTicksPerSecond) / 10000000) { | |
| *q = num_hi * 10000000 + num_lo / (100 * kTicksPerNanosecond); | |
| *rem = time_internal::MakeDuration(0, num_lo % den_lo); | |
| return true; | |
| } | |
| } else if (den_hi == 0 && den_lo == 1000 * kTicksPerNanosecond) { | |
| // Dividing by 1us | |
| if (num_hi >= 0 && num_hi < (kint64max - kTicksPerSecond) / 1000000) { | |
| *q = num_hi * 1000000 + num_lo / (1000 * kTicksPerNanosecond); | |
| *rem = time_internal::MakeDuration(0, num_lo % den_lo); | |
| return true; | |
| } | |
| } else if (den_hi == 0 && den_lo == 1000000 * kTicksPerNanosecond) { | |
| // Dividing by 1ms | |
| if (num_hi >= 0 && num_hi < (kint64max - kTicksPerSecond) / 1000) { | |
| *q = num_hi * 1000 + num_lo / (1000000 * kTicksPerNanosecond); | |
| *rem = time_internal::MakeDuration(0, num_lo % den_lo); | |
| return true; | |
| } | |
| } else if (den_hi > 0 && den_lo == 0) { | |
| // Dividing by positive multiple of 1s | |
| if (num_hi >= 0) { | |
| if (den_hi == 1) { | |
| *q = num_hi; | |
| *rem = time_internal::MakeDuration(0, num_lo); | |
| return true; | |
| } | |
| *q = num_hi / den_hi; | |
| *rem = time_internal::MakeDuration(num_hi % den_hi, num_lo); | |
| return true; | |
| } | |
| if (num_lo != 0) { | |
| num_hi += 1; | |
| } | |
| int64_t quotient = num_hi / den_hi; | |
| int64_t rem_sec = num_hi % den_hi; | |
| if (rem_sec > 0) { | |
| rem_sec -= den_hi; | |
| quotient += 1; | |
| } | |
| if (num_lo != 0) { | |
| rem_sec -= 1; | |
| } | |
| *q = quotient; | |
| *rem = time_internal::MakeDuration(rem_sec, num_lo); | |
| return true; | |
| } | |
| return false; | |
| } | |
| } // namespace | |
| namespace time_internal { | |
| // The 'satq' argument indicates whether the quotient should saturate at the | |
| // bounds of int64_t. If it does saturate, the difference will spill over to | |
| // the remainder. If it does not saturate, the remainder remain accurate, | |
| // but the returned quotient will over/underflow int64_t and should not be used. | |
| int64_t IDivDuration(bool satq, const Duration num, const Duration den, | |
| Duration* rem) { | |
| int64_t q = 0; | |
| if (IDivFastPath(num, den, &q, rem)) { | |
| return q; | |
| } | |
| const bool num_neg = num < ZeroDuration(); | |
| const bool den_neg = den < ZeroDuration(); | |
| const bool quotient_neg = num_neg != den_neg; | |
| if (time_internal::IsInfiniteDuration(num) || den == ZeroDuration()) { | |
| *rem = num_neg ? -InfiniteDuration() : InfiniteDuration(); | |
| return quotient_neg ? kint64min : kint64max; | |
| } | |
| if (time_internal::IsInfiniteDuration(den)) { | |
| *rem = num; | |
| return 0; | |
| } | |
| const uint128 a = MakeU128Ticks(num); | |
| const uint128 b = MakeU128Ticks(den); | |
| uint128 quotient128 = a / b; | |
| if (satq) { | |
| // Limits the quotient to the range of int64_t. | |
| if (quotient128 > uint128(static_cast<uint64_t>(kint64max))) { | |
| quotient128 = quotient_neg ? uint128(static_cast<uint64_t>(kint64min)) | |
| : uint128(static_cast<uint64_t>(kint64max)); | |
| } | |
| } | |
| const uint128 remainder128 = a - quotient128 * b; | |
| *rem = MakeDurationFromU128(remainder128, num_neg); | |
| if (!quotient_neg || quotient128 == 0) { | |
| return Uint128Low64(quotient128) & kint64max; | |
| } | |
| // The quotient needs to be negated, but we need to carefully handle | |
| // quotient128s with the top bit on. | |
| return -static_cast<int64_t>(Uint128Low64(quotient128 - 1) & kint64max) - 1; | |
| } | |
| } // namespace time_internal | |
| // | |
| // Additive operators. | |
| // | |
| Duration& Duration::operator+=(Duration rhs) { | |
| if (time_internal::IsInfiniteDuration(*this)) return *this; | |
| if (time_internal::IsInfiniteDuration(rhs)) return *this = rhs; | |
| const int64_t orig_rep_hi = rep_hi_; | |
| rep_hi_ = | |
| DecodeTwosComp(EncodeTwosComp(rep_hi_) + EncodeTwosComp(rhs.rep_hi_)); | |
| if (rep_lo_ >= kTicksPerSecond - rhs.rep_lo_) { | |
| rep_hi_ = DecodeTwosComp(EncodeTwosComp(rep_hi_) + 1); | |
| rep_lo_ -= kTicksPerSecond; | |
| } | |
| rep_lo_ += rhs.rep_lo_; | |
| if (rhs.rep_hi_ < 0 ? rep_hi_ > orig_rep_hi : rep_hi_ < orig_rep_hi) { | |
| return *this = rhs.rep_hi_ < 0 ? -InfiniteDuration() : InfiniteDuration(); | |
| } | |
| return *this; | |
| } | |
| Duration& Duration::operator-=(Duration rhs) { | |
| if (time_internal::IsInfiniteDuration(*this)) return *this; | |
| if (time_internal::IsInfiniteDuration(rhs)) { | |
| return *this = rhs.rep_hi_ >= 0 ? -InfiniteDuration() : InfiniteDuration(); | |
| } | |
| const int64_t orig_rep_hi = rep_hi_; | |
| rep_hi_ = | |
| DecodeTwosComp(EncodeTwosComp(rep_hi_) - EncodeTwosComp(rhs.rep_hi_)); | |
| if (rep_lo_ < rhs.rep_lo_) { | |
| rep_hi_ = DecodeTwosComp(EncodeTwosComp(rep_hi_) - 1); | |
| rep_lo_ += kTicksPerSecond; | |
| } | |
| rep_lo_ -= rhs.rep_lo_; | |
| if (rhs.rep_hi_ < 0 ? rep_hi_ < orig_rep_hi : rep_hi_ > orig_rep_hi) { | |
| return *this = rhs.rep_hi_ >= 0 ? -InfiniteDuration() : InfiniteDuration(); | |
| } | |
| return *this; | |
| } | |
| // | |
| // Multiplicative operators. | |
| // | |
| Duration& Duration::operator*=(int64_t r) { | |
| if (time_internal::IsInfiniteDuration(*this)) { | |
| const bool is_neg = (r < 0) != (rep_hi_ < 0); | |
| return *this = is_neg ? -InfiniteDuration() : InfiniteDuration(); | |
| } | |
| return *this = ScaleFixed<SafeMultiply>(*this, r); | |
| } | |
| Duration& Duration::operator*=(double r) { | |
| if (time_internal::IsInfiniteDuration(*this) || !IsFinite(r)) { | |
| const bool is_neg = (std::signbit(r) != 0) != (rep_hi_ < 0); | |
| return *this = is_neg ? -InfiniteDuration() : InfiniteDuration(); | |
| } | |
| return *this = ScaleDouble<std::multiplies>(*this, r); | |
| } | |
| Duration& Duration::operator/=(int64_t r) { | |
| if (time_internal::IsInfiniteDuration(*this) || r == 0) { | |
| const bool is_neg = (r < 0) != (rep_hi_ < 0); | |
| return *this = is_neg ? -InfiniteDuration() : InfiniteDuration(); | |
| } | |
| return *this = ScaleFixed<std::divides>(*this, r); | |
| } | |
| Duration& Duration::operator/=(double r) { | |
| if (time_internal::IsInfiniteDuration(*this) || r == 0.0) { | |
| const bool is_neg = (std::signbit(r) != 0) != (rep_hi_ < 0); | |
| return *this = is_neg ? -InfiniteDuration() : InfiniteDuration(); | |
| } | |
| return *this = ScaleDouble<std::divides>(*this, r); | |
| } | |
| Duration& Duration::operator%=(Duration rhs) { | |
| time_internal::IDivDuration(false, *this, rhs, this); | |
| return *this; | |
| } | |
| double FDivDuration(Duration num, Duration den) { | |
| // Arithmetic with infinity is sticky. | |
| if (time_internal::IsInfiniteDuration(num) || den == ZeroDuration()) { | |
| return (num < ZeroDuration()) == (den < ZeroDuration()) | |
| ? std::numeric_limits<double>::infinity() | |
| : -std::numeric_limits<double>::infinity(); | |
| } | |
| if (time_internal::IsInfiniteDuration(den)) return 0.0; | |
| double a = | |
| static_cast<double>(time_internal::GetRepHi(num)) * kTicksPerSecond + | |
| time_internal::GetRepLo(num); | |
| double b = | |
| static_cast<double>(time_internal::GetRepHi(den)) * kTicksPerSecond + | |
| time_internal::GetRepLo(den); | |
| return a / b; | |
| } | |
| // | |
| // Trunc/Floor/Ceil. | |
| // | |
| Duration Trunc(Duration d, Duration unit) { | |
| return d - (d % unit); | |
| } | |
| Duration Floor(const Duration d, const Duration unit) { | |
| const absl::Duration td = Trunc(d, unit); | |
| return td <= d ? td : td - AbsDuration(unit); | |
| } | |
| Duration Ceil(const Duration d, const Duration unit) { | |
| const absl::Duration td = Trunc(d, unit); | |
| return td >= d ? td : td + AbsDuration(unit); | |
| } | |
| // | |
| // Factory functions. | |
| // | |
| Duration DurationFromTimespec(timespec ts) { | |
| if (static_cast<uint64_t>(ts.tv_nsec) < 1000 * 1000 * 1000) { | |
| int64_t ticks = ts.tv_nsec * kTicksPerNanosecond; | |
| return time_internal::MakeDuration(ts.tv_sec, ticks); | |
| } | |
| return Seconds(ts.tv_sec) + Nanoseconds(ts.tv_nsec); | |
| } | |
| Duration DurationFromTimeval(timeval tv) { | |
| if (static_cast<uint64_t>(tv.tv_usec) < 1000 * 1000) { | |
| int64_t ticks = tv.tv_usec * 1000 * kTicksPerNanosecond; | |
| return time_internal::MakeDuration(tv.tv_sec, ticks); | |
| } | |
| return Seconds(tv.tv_sec) + Microseconds(tv.tv_usec); | |
| } | |
| // | |
| // Conversion to other duration types. | |
| // | |
| int64_t ToInt64Nanoseconds(Duration d) { | |
| if (time_internal::GetRepHi(d) >= 0 && | |
| time_internal::GetRepHi(d) >> 33 == 0) { | |
| return (time_internal::GetRepHi(d) * 1000 * 1000 * 1000) + | |
| (time_internal::GetRepLo(d) / kTicksPerNanosecond); | |
| } | |
| return d / Nanoseconds(1); | |
| } | |
| int64_t ToInt64Microseconds(Duration d) { | |
| if (time_internal::GetRepHi(d) >= 0 && | |
| time_internal::GetRepHi(d) >> 43 == 0) { | |
| return (time_internal::GetRepHi(d) * 1000 * 1000) + | |
| (time_internal::GetRepLo(d) / (kTicksPerNanosecond * 1000)); | |
| } | |
| return d / Microseconds(1); | |
| } | |
| int64_t ToInt64Milliseconds(Duration d) { | |
| if (time_internal::GetRepHi(d) >= 0 && | |
| time_internal::GetRepHi(d) >> 53 == 0) { | |
| return (time_internal::GetRepHi(d) * 1000) + | |
| (time_internal::GetRepLo(d) / (kTicksPerNanosecond * 1000 * 1000)); | |
| } | |
| return d / Milliseconds(1); | |
| } | |
| int64_t ToInt64Seconds(Duration d) { | |
| int64_t hi = time_internal::GetRepHi(d); | |
| if (time_internal::IsInfiniteDuration(d)) return hi; | |
| if (hi < 0 && time_internal::GetRepLo(d) != 0) ++hi; | |
| return hi; | |
| } | |
| int64_t ToInt64Minutes(Duration d) { | |
| int64_t hi = time_internal::GetRepHi(d); | |
| if (time_internal::IsInfiniteDuration(d)) return hi; | |
| if (hi < 0 && time_internal::GetRepLo(d) != 0) ++hi; | |
| return hi / 60; | |
| } | |
| int64_t ToInt64Hours(Duration d) { | |
| int64_t hi = time_internal::GetRepHi(d); | |
| if (time_internal::IsInfiniteDuration(d)) return hi; | |
| if (hi < 0 && time_internal::GetRepLo(d) != 0) ++hi; | |
| return hi / (60 * 60); | |
| } | |
| double ToDoubleNanoseconds(Duration d) { | |
| return FDivDuration(d, Nanoseconds(1)); | |
| } | |
| double ToDoubleMicroseconds(Duration d) { | |
| return FDivDuration(d, Microseconds(1)); | |
| } | |
| double ToDoubleMilliseconds(Duration d) { | |
| return FDivDuration(d, Milliseconds(1)); | |
| } | |
| double ToDoubleSeconds(Duration d) { | |
| return FDivDuration(d, Seconds(1)); | |
| } | |
| double ToDoubleMinutes(Duration d) { | |
| return FDivDuration(d, Minutes(1)); | |
| } | |
| double ToDoubleHours(Duration d) { | |
| return FDivDuration(d, Hours(1)); | |
| } | |
| timespec ToTimespec(Duration d) { | |
| timespec ts; | |
| if (!time_internal::IsInfiniteDuration(d)) { | |
| int64_t rep_hi = time_internal::GetRepHi(d); | |
| uint32_t rep_lo = time_internal::GetRepLo(d); | |
| if (rep_hi < 0) { | |
| // Tweak the fields so that unsigned division of rep_lo | |
| // maps to truncation (towards zero) for the timespec. | |
| rep_lo += kTicksPerNanosecond - 1; | |
| if (rep_lo >= kTicksPerSecond) { | |
| rep_hi += 1; | |
| rep_lo -= kTicksPerSecond; | |
| } | |
| } | |
| ts.tv_sec = rep_hi; | |
| if (ts.tv_sec == rep_hi) { // no time_t narrowing | |
| ts.tv_nsec = rep_lo / kTicksPerNanosecond; | |
| return ts; | |
| } | |
| } | |
| if (d >= ZeroDuration()) { | |
| ts.tv_sec = std::numeric_limits<time_t>::max(); | |
| ts.tv_nsec = 1000 * 1000 * 1000 - 1; | |
| } else { | |
| ts.tv_sec = std::numeric_limits<time_t>::min(); | |
| ts.tv_nsec = 0; | |
| } | |
| return ts; | |
| } | |
| timeval ToTimeval(Duration d) { | |
| timeval tv; | |
| timespec ts = ToTimespec(d); | |
| if (ts.tv_sec < 0) { | |
| // Tweak the fields so that positive division of tv_nsec | |
| // maps to truncation (towards zero) for the timeval. | |
| ts.tv_nsec += 1000 - 1; | |
| if (ts.tv_nsec >= 1000 * 1000 * 1000) { | |
| ts.tv_sec += 1; | |
| ts.tv_nsec -= 1000 * 1000 * 1000; | |
| } | |
| } | |
| tv.tv_sec = ts.tv_sec; | |
| if (tv.tv_sec != ts.tv_sec) { // narrowing | |
| if (ts.tv_sec < 0) { | |
| tv.tv_sec = std::numeric_limits<decltype(tv.tv_sec)>::min(); | |
| tv.tv_usec = 0; | |
| } else { | |
| tv.tv_sec = std::numeric_limits<decltype(tv.tv_sec)>::max(); | |
| tv.tv_usec = 1000 * 1000 - 1; | |
| } | |
| return tv; | |
| } | |
| tv.tv_usec = static_cast<int>(ts.tv_nsec / 1000); // suseconds_t | |
| return tv; | |
| } | |
| std::chrono::nanoseconds ToChronoNanoseconds(Duration d) { | |
| return time_internal::ToChronoDuration<std::chrono::nanoseconds>(d); | |
| } | |
| std::chrono::microseconds ToChronoMicroseconds(Duration d) { | |
| return time_internal::ToChronoDuration<std::chrono::microseconds>(d); | |
| } | |
| std::chrono::milliseconds ToChronoMilliseconds(Duration d) { | |
| return time_internal::ToChronoDuration<std::chrono::milliseconds>(d); | |
| } | |
| std::chrono::seconds ToChronoSeconds(Duration d) { | |
| return time_internal::ToChronoDuration<std::chrono::seconds>(d); | |
| } | |
| std::chrono::minutes ToChronoMinutes(Duration d) { | |
| return time_internal::ToChronoDuration<std::chrono::minutes>(d); | |
| } | |
| std::chrono::hours ToChronoHours(Duration d) { | |
| return time_internal::ToChronoDuration<std::chrono::hours>(d); | |
| } | |
| // | |
| // To/From std::string formatting. | |
| // | |
| namespace { | |
| // Formats a positive 64-bit integer in the given field width. Note that | |
| // it is up to the caller of Format64() to ensure that there is sufficient | |
| // space before ep to hold the conversion. | |
| char* Format64(char* ep, int width, int64_t v) { | |
| do { | |
| --width; | |
| *--ep = '0' + (v % 10); // contiguous digits | |
| } while (v /= 10); | |
| while (--width >= 0) *--ep = '0'; // zero pad | |
| return ep; | |
| } | |
| // Helpers for FormatDuration() that format 'n' and append it to 'out' | |
| // followed by the given 'unit'. If 'n' formats to "0", nothing is | |
| // appended (not even the unit). | |
| // A type that encapsulates how to display a value of a particular unit. For | |
| // values that are displayed with fractional parts, the precision indicates | |
| // where to round the value. The precision varies with the display unit because | |
| // a Duration can hold only quarters of a nanosecond, so displaying information | |
| // beyond that is just noise. | |
| // | |
| // For example, a microsecond value of 42.00025xxxxx should not display beyond 5 | |
| // fractional digits, because it is in the noise of what a Duration can | |
| // represent. | |
| struct DisplayUnit { | |
| const char* abbr; | |
| int prec; | |
| double pow10; | |
| }; | |
| const DisplayUnit kDisplayNano = {"ns", 2, 1e2}; | |
| const DisplayUnit kDisplayMicro = {"us", 5, 1e5}; | |
| const DisplayUnit kDisplayMilli = {"ms", 8, 1e8}; | |
| const DisplayUnit kDisplaySec = {"s", 11, 1e11}; | |
| const DisplayUnit kDisplayMin = {"m", -1, 0.0}; // prec ignored | |
| const DisplayUnit kDisplayHour = {"h", -1, 0.0}; // prec ignored | |
| void AppendNumberUnit(std::string* out, int64_t n, DisplayUnit unit) { | |
| char buf[sizeof("2562047788015216")]; // hours in max duration | |
| char* const ep = buf + sizeof(buf); | |
| char* bp = Format64(ep, 0, n); | |
| if (*bp != '0' || bp + 1 != ep) { | |
| out->append(bp, ep - bp); | |
| out->append(unit.abbr); | |
| } | |
| } | |
| // Note: unit.prec is limited to double's digits10 value (typically 15) so it | |
| // always fits in buf[]. | |
| void AppendNumberUnit(std::string* out, double n, DisplayUnit unit) { | |
| const int buf_size = std::numeric_limits<double>::digits10; | |
| const int prec = std::min(buf_size, unit.prec); | |
| char buf[buf_size]; // also large enough to hold integer part | |
| char* ep = buf + sizeof(buf); | |
| double d = 0; | |
| int64_t frac_part = Round(std::modf(n, &d) * unit.pow10); | |
| int64_t int_part = d; | |
| if (int_part != 0 || frac_part != 0) { | |
| char* bp = Format64(ep, 0, int_part); // always < 1000 | |
| out->append(bp, ep - bp); | |
| if (frac_part != 0) { | |
| out->push_back('.'); | |
| bp = Format64(ep, prec, frac_part); | |
| while (ep[-1] == '0') --ep; | |
| out->append(bp, ep - bp); | |
| } | |
| out->append(unit.abbr); | |
| } | |
| } | |
| } // namespace | |
| // From Go's doc at http://golang.org/pkg/time/#Duration.String | |
| // [FormatDuration] returns a std::string representing the duration in the | |
| // form "72h3m0.5s". Leading zero units are omitted. As a special | |
| // case, durations less than one second format use a smaller unit | |
| // (milli-, micro-, or nanoseconds) to ensure that the leading digit | |
| // is non-zero. The zero duration formats as 0, with no unit. | |
| std::string FormatDuration(Duration d) { | |
| const Duration min_duration = Seconds(kint64min); | |
| if (d == min_duration) { | |
| // Avoid needing to negate kint64min by directly returning what the | |
| // following code should produce in that case. | |
| return "-2562047788015215h30m8s"; | |
| } | |
| std::string s; | |
| if (d < ZeroDuration()) { | |
| s.append("-"); | |
| d = -d; | |
| } | |
| if (d == InfiniteDuration()) { | |
| s.append("inf"); | |
| } else if (d < Seconds(1)) { | |
| // Special case for durations with a magnitude < 1 second. The duration | |
| // is printed as a fraction of a single unit, e.g., "1.2ms". | |
| if (d < Microseconds(1)) { | |
| AppendNumberUnit(&s, FDivDuration(d, Nanoseconds(1)), kDisplayNano); | |
| } else if (d < Milliseconds(1)) { | |
| AppendNumberUnit(&s, FDivDuration(d, Microseconds(1)), kDisplayMicro); | |
| } else { | |
| AppendNumberUnit(&s, FDivDuration(d, Milliseconds(1)), kDisplayMilli); | |
| } | |
| } else { | |
| AppendNumberUnit(&s, IDivDuration(d, Hours(1), &d), kDisplayHour); | |
| AppendNumberUnit(&s, IDivDuration(d, Minutes(1), &d), kDisplayMin); | |
| AppendNumberUnit(&s, FDivDuration(d, Seconds(1)), kDisplaySec); | |
| } | |
| if (s.empty() || s == "-") { | |
| s = "0"; | |
| } | |
| return s; | |
| } | |
| namespace { | |
| // A helper for ParseDuration() that parses a leading number from the given | |
| // std::string and stores the result in *int_part/*frac_part/*frac_scale. The | |
| // given std::string pointer is modified to point to the first unconsumed char. | |
| bool ConsumeDurationNumber(const char** dpp, int64_t* int_part, | |
| int64_t* frac_part, int64_t* frac_scale) { | |
| *int_part = 0; | |
| *frac_part = 0; | |
| *frac_scale = 1; // invariant: *frac_part < *frac_scale | |
| const char* start = *dpp; | |
| for (; std::isdigit(**dpp); *dpp += 1) { | |
| const int d = **dpp - '0'; // contiguous digits | |
| if (*int_part > kint64max / 10) return false; | |
| *int_part *= 10; | |
| if (*int_part > kint64max - d) return false; | |
| *int_part += d; | |
| } | |
| const bool int_part_empty = (*dpp == start); | |
| if (**dpp != '.') return !int_part_empty; | |
| for (*dpp += 1; std::isdigit(**dpp); *dpp += 1) { | |
| const int d = **dpp - '0'; // contiguous digits | |
| if (*frac_scale <= kint64max / 10) { | |
| *frac_part *= 10; | |
| *frac_part += d; | |
| *frac_scale *= 10; | |
| } | |
| } | |
| return !int_part_empty || *frac_scale != 1; | |
| } | |
| // A helper for ParseDuration() that parses a leading unit designator (e.g., | |
| // ns, us, ms, s, m, h) from the given std::string and stores the resulting unit | |
| // in "*unit". The given std::string pointer is modified to point to the first | |
| // unconsumed char. | |
| bool ConsumeDurationUnit(const char** start, Duration* unit) { | |
| const char *s = *start; | |
| bool ok = true; | |
| if (strncmp(s, "ns", 2) == 0) { | |
| s += 2; | |
| *unit = Nanoseconds(1); | |
| } else if (strncmp(s, "us", 2) == 0) { | |
| s += 2; | |
| *unit = Microseconds(1); | |
| } else if (strncmp(s, "ms", 2) == 0) { | |
| s += 2; | |
| *unit = Milliseconds(1); | |
| } else if (strncmp(s, "s", 1) == 0) { | |
| s += 1; | |
| *unit = Seconds(1); | |
| } else if (strncmp(s, "m", 1) == 0) { | |
| s += 1; | |
| *unit = Minutes(1); | |
| } else if (strncmp(s, "h", 1) == 0) { | |
| s += 1; | |
| *unit = Hours(1); | |
| } else { | |
| ok = false; | |
| } | |
| *start = s; | |
| return ok; | |
| } | |
| } // namespace | |
| // From Go's doc at http://golang.org/pkg/time/#ParseDuration | |
| // [ParseDuration] parses a duration std::string. A duration std::string is | |
| // a possibly signed sequence of decimal numbers, each with optional | |
| // fraction and a unit suffix, such as "300ms", "-1.5h" or "2h45m". | |
| // Valid time units are "ns", "us" "ms", "s", "m", "h". | |
| bool ParseDuration(const std::string& dur_string, Duration* d) { | |
| const char* start = dur_string.c_str(); | |
| int sign = 1; | |
| if (*start == '-' || *start == '+') { | |
| sign = *start == '-' ? -1 : 1; | |
| ++start; | |
| } | |
| // Can't parse a duration from an empty std::string. | |
| if (*start == '\0') { | |
| return false; | |
| } | |
| // Special case for a std::string of "0". | |
| if (*start == '0' && *(start + 1) == '\0') { | |
| *d = ZeroDuration(); | |
| return true; | |
| } | |
| if (strcmp(start, "inf") == 0) { | |
| *d = sign * InfiniteDuration(); | |
| return true; | |
| } | |
| Duration dur; | |
| while (*start != '\0') { | |
| int64_t int_part; | |
| int64_t frac_part; | |
| int64_t frac_scale; | |
| Duration unit; | |
| if (!ConsumeDurationNumber(&start, &int_part, &frac_part, &frac_scale) || | |
| !ConsumeDurationUnit(&start, &unit)) { | |
| return false; | |
| } | |
| if (int_part != 0) dur += sign * int_part * unit; | |
| if (frac_part != 0) dur += sign * frac_part * unit / frac_scale; | |
| } | |
| *d = dur; | |
| return true; | |
| } | |
| // TODO(absl-team): Remove once dependencies are removed. | |
| bool ParseFlag(const std::string& text, Duration* dst, std::string* /* err */) { | |
| return ParseDuration(text, dst); | |
| } | |
| std::string UnparseFlag(Duration d) { | |
| return FormatDuration(d); | |
| } | |
| } // namespace absl |