| // Copyright 2018 The Abseil Authors. | |
| // | |
| // Licensed under the Apache License, Version 2.0 (the "License"); | |
| // you may not use this file except in compliance with the License. | |
| // You may obtain a copy of the License at | |
| // | |
| // https://www.apache.org/licenses/LICENSE-2.0 | |
| // | |
| // Unless required by applicable law or agreed to in writing, software | |
| // distributed under the License is distributed on an "AS IS" BASIS, | |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |
| // See the License for the specific language governing permissions and | |
| // limitations under the License. | |
| // This library provides Symbolize() function that symbolizes program | |
| // counters to their corresponding symbol names on linux platforms. | |
| // This library has a minimal implementation of an ELF symbol table | |
| // reader (i.e. it doesn't depend on libelf, etc.). | |
| // | |
| // The algorithm used in Symbolize() is as follows. | |
| // | |
| // 1. Go through a list of maps in /proc/self/maps and find the map | |
| // containing the program counter. | |
| // | |
| // 2. Open the mapped file and find a regular symbol table inside. | |
| // Iterate over symbols in the symbol table and look for the symbol | |
| // containing the program counter. If such a symbol is found, | |
| // obtain the symbol name, and demangle the symbol if possible. | |
| // If the symbol isn't found in the regular symbol table (binary is | |
| // stripped), try the same thing with a dynamic symbol table. | |
| // | |
| // Note that Symbolize() is originally implemented to be used in | |
| // signal handlers, hence it doesn't use malloc() and other unsafe | |
| // operations. It should be both thread-safe and async-signal-safe. | |
| // | |
| // Implementation note: | |
| // | |
| // We don't use heaps but only use stacks. We want to reduce the | |
| // stack consumption so that the symbolizer can run on small stacks. | |
| // | |
| // Here are some numbers collected with GCC 4.1.0 on x86: | |
| // - sizeof(Elf32_Sym) = 16 | |
| // - sizeof(Elf32_Shdr) = 40 | |
| // - sizeof(Elf64_Sym) = 24 | |
| // - sizeof(Elf64_Shdr) = 64 | |
| // | |
| // This implementation is intended to be async-signal-safe but uses some | |
| // functions which are not guaranteed to be so, such as memchr() and | |
| // memmove(). We assume they are async-signal-safe. | |
| #include <dlfcn.h> | |
| #include <elf.h> | |
| #include <fcntl.h> | |
| #include <link.h> // For ElfW() macro. | |
| #include <sys/resource.h> | |
| #include <sys/stat.h> | |
| #include <sys/types.h> | |
| #include <unistd.h> | |
| #include <algorithm> | |
| #include <array> | |
| #include <atomic> | |
| #include <cerrno> | |
| #include <cinttypes> | |
| #include <climits> | |
| #include <cstdint> | |
| #include <cstdio> | |
| #include <cstdlib> | |
| #include <cstring> | |
| #include <iterator> | |
| #include <memory> | |
| #include "absl/base/casts.h" | |
| #include "absl/base/dynamic_annotations.h" | |
| #include "absl/base/internal/low_level_alloc.h" | |
| #include "absl/base/internal/raw_logging.h" | |
| #include "absl/base/internal/spinlock.h" | |
| #include "absl/base/port.h" | |
| #include "absl/debugging/internal/demangle.h" | |
| #include "absl/debugging/internal/vdso_support.h" | |
| #include "absl/strings/string_view.h" | |
| namespace absl { | |
| ABSL_NAMESPACE_BEGIN | |
| // Value of argv[0]. Used by MaybeInitializeObjFile(). | |
| static char *argv0_value = nullptr; | |
| void InitializeSymbolizer(const char *argv0) { | |
| #ifdef ABSL_HAVE_VDSO_SUPPORT | |
| // We need to make sure VDSOSupport::Init() is called before any setuid or | |
| // chroot calls, so InitializeSymbolizer() should be called very early in the | |
| // life of a program. | |
| absl::debugging_internal::VDSOSupport::Init(); | |
| #endif | |
| if (argv0_value != nullptr) { | |
| free(argv0_value); | |
| argv0_value = nullptr; | |
| } | |
| if (argv0 != nullptr && argv0[0] != '\0') { | |
| argv0_value = strdup(argv0); | |
| } | |
| } | |
| namespace debugging_internal { | |
| namespace { | |
| // Re-runs fn until it doesn't cause EINTR. | |
| #define NO_INTR(fn) \ | |
| do { \ | |
| } while ((fn) < 0 && errno == EINTR) | |
| // On Linux, ELF_ST_* are defined in <linux/elf.h>. To make this portable | |
| // we define our own ELF_ST_BIND and ELF_ST_TYPE if not available. | |
| #ifndef ELF_ST_BIND | |
| #define ELF_ST_BIND(info) (((unsigned char)(info)) >> 4) | |
| #endif | |
| #ifndef ELF_ST_TYPE | |
| #define ELF_ST_TYPE(info) (((unsigned char)(info)) & 0xF) | |
| #endif | |
| // Some platforms use a special .opd section to store function pointers. | |
| const char kOpdSectionName[] = ".opd"; | |
| #if defined(__powerpc64__) && defined(_CALL_ELF) | |
| #if _CALL_ELF <= 1 | |
| #define ABSL_INTERNAL_HAVE_PPC64_ELFV1_ABI 1 | |
| #endif | |
| #endif | |
| #if defined(ABSL_INTERNAL_HAVE_PPC64_ELFV1_ABI) || defined(__ia64) | |
| // Use opd section for function descriptors on these platforms, the function | |
| // address is the first word of the descriptor. | |
| // | |
| // https://maskray.me/blog/2023-02-26-linker-notes-on-power-isa notes that | |
| // opd sections are used on 64-bit PowerPC with the ELFv1 ABI. | |
| inline constexpr bool kPlatformUsesOPDSections = true; | |
| #else | |
| inline constexpr bool kPlatformUsesOPDSections = false; | |
| #endif | |
| // This works for PowerPC & IA64 only. A function descriptor consist of two | |
| // pointers and the first one is the function's entry. | |
| const size_t kFunctionDescriptorSize = sizeof(void *) * 2; | |
| std::atomic<SymbolDecorator::Factory*> g_decorator_factory = nullptr; | |
| struct FileMappingHint { | |
| const void *start; | |
| const void *end; | |
| uint64_t offset; | |
| const char *filename; | |
| }; | |
| const int kMaxFileMappingHints = 8; | |
| int g_num_file_mapping_hints; | |
| FileMappingHint g_file_mapping_hints[kMaxFileMappingHints]; | |
| // Protects g_file_mapping_hints. | |
| ABSL_CONST_INIT absl::base_internal::SpinLock g_file_mapping_mu( | |
| absl::base_internal::SCHEDULE_KERNEL_ONLY); | |
| // Async-signal-safe function to zero a buffer. | |
| // memset() is not guaranteed to be async-signal-safe. | |
| static void SafeMemZero(void *p, size_t size) { | |
| unsigned char *c = static_cast<unsigned char *>(p); | |
| while (size--) { | |
| *c++ = 0; | |
| } | |
| } | |
| struct ObjFile { | |
| char *filename = nullptr; | |
| const void *start_addr = nullptr; | |
| const void *end_addr = nullptr; | |
| uint64_t offset = 0; | |
| // The following fields are initialized on the first access to the | |
| // object file. | |
| int fd = -1; | |
| int elf_type = -1; | |
| ElfW(Ehdr) elf_header = {}; | |
| // PT_LOAD program header describing executable code. | |
| // Normally we expect just one, but SWIFT binaries have two. | |
| // CUDA binaries have 3 (see cr/473913254 description). | |
| std::array<ElfW(Phdr), 4> phdr = {}; | |
| SymbolDecoratorPtr decorator = {}; | |
| }; | |
| // Build 4-way associative cache for symbols. Within each cache line, symbols | |
| // are replaced in LRU order. | |
| enum { | |
| ASSOCIATIVITY = 4, | |
| }; | |
| struct SymbolCacheLine { | |
| const void *pc[ASSOCIATIVITY]; | |
| char *name[ASSOCIATIVITY]; | |
| // age[i] is incremented when a line is accessed. it's reset to zero if the | |
| // i'th entry is read. | |
| uint32_t age[ASSOCIATIVITY]; | |
| }; | |
| // --------------------------------------------------------------- | |
| // An AddrMap is a vector of ObjFile, using SigSafeArena() for allocation. | |
| class AddrMap { | |
| public: | |
| AddrMap() : size_(0), allocated_(0), obj_(nullptr) {} | |
| ~AddrMap() { base_internal::LowLevelAlloc::Free(obj_); } | |
| size_t Size() const { return size_; } | |
| ObjFile *At(size_t i) { return &obj_[i]; } | |
| ObjFile *Add(); | |
| void Clear(); | |
| private: | |
| size_t size_; // count of valid elements (<= allocated_) | |
| size_t allocated_; // count of allocated elements | |
| ObjFile *obj_; // array of allocated_ elements | |
| AddrMap(const AddrMap &) = delete; | |
| AddrMap &operator=(const AddrMap &) = delete; | |
| }; | |
| void AddrMap::Clear() { | |
| for (size_t i = 0; i != size_; i++) { | |
| At(i)->~ObjFile(); | |
| } | |
| size_ = 0; | |
| } | |
| ObjFile *AddrMap::Add() { | |
| if (size_ == allocated_) { | |
| size_t new_allocated = allocated_ * 2 + 50; | |
| ObjFile *new_obj_ = | |
| static_cast<ObjFile *>(base_internal::LowLevelAlloc::AllocWithArena( | |
| new_allocated * sizeof(*new_obj_), base_internal::SigSafeArena())); | |
| if (obj_) { | |
| std::uninitialized_move_n(obj_, size_, new_obj_); | |
| std::destroy_n(obj_, size_); | |
| base_internal::LowLevelAlloc::Free(obj_); | |
| } | |
| obj_ = new_obj_; | |
| allocated_ = new_allocated; | |
| } | |
| return new (&obj_[size_++]) ObjFile; | |
| } | |
| class CachingFile { | |
| public: | |
| // Setup reader for fd that uses buf[0, buf_size-1] as a cache. | |
| CachingFile(int fd, char *buf, size_t buf_size) | |
| : fd_(fd), | |
| cache_(buf), | |
| cache_size_(buf_size), | |
| cache_start_(0), | |
| cache_limit_(0) {} | |
| int fd() const { return fd_; } | |
| ssize_t ReadFromOffset(void *buf, size_t count, off_t offset); | |
| bool ReadFromOffsetExact(void *buf, size_t count, off_t offset); | |
| private: | |
| // Bytes [cache_start_, cache_limit_-1] from fd_ are stored in | |
| // a prefix of cache_[0, cache_size_-1]. | |
| int fd_; | |
| char *cache_; | |
| size_t cache_size_; | |
| off_t cache_start_; | |
| off_t cache_limit_; | |
| }; | |
| // --------------------------------------------------------------- | |
| enum FindSymbolResult { SYMBOL_NOT_FOUND = 1, SYMBOL_TRUNCATED, SYMBOL_FOUND }; | |
| class Symbolizer { | |
| public: | |
| Symbolizer(); | |
| ~Symbolizer(); | |
| const char *GetSymbol(const void *const pc); | |
| void UpdateDecoratorsIfNeeded(SymbolDecorator::Factory* decorator_factory); | |
| private: | |
| char *CopyString(const char *s) { | |
| size_t len = strlen(s); | |
| char *dst = | |
| static_cast<char *>(base_internal::LowLevelAlloc::AllocWithArena( | |
| len + 1, base_internal::SigSafeArena())); | |
| ABSL_RAW_CHECK(dst != nullptr, "out of memory"); | |
| memcpy(dst, s, len + 1); | |
| return dst; | |
| } | |
| ABSL_ATTRIBUTE_NOINLINE ObjFile* FindObjFile(const void* const start, | |
| size_t size); | |
| static bool RegisterObjFile(const char *filename, | |
| const void *const start_addr, | |
| const void *const end_addr, uint64_t offset, | |
| void *arg); | |
| SymbolCacheLine *GetCacheLine(const void *const pc); | |
| const char *FindSymbolInCache(const void *const pc); | |
| const char *InsertSymbolInCache(const void *const pc, const char *name); | |
| void AgeSymbols(SymbolCacheLine *line); | |
| void ClearAddrMap(); | |
| FindSymbolResult GetSymbolFromObjectFile(const ObjFile &obj, | |
| const void *const pc, | |
| const ptrdiff_t relocation, | |
| char *out, size_t out_size, | |
| char *tmp_buf, size_t tmp_buf_size); | |
| const char *GetUncachedSymbol(const void *pc); | |
| enum { | |
| SYMBOL_BUF_SIZE = 3072, | |
| TMP_BUF_SIZE = 1024, | |
| SYMBOL_CACHE_LINES = 128, | |
| FILE_CACHE_SIZE = 8192, | |
| }; | |
| AddrMap addr_map_; | |
| SymbolDecorator::Factory* decorator_factory_ = nullptr; | |
| bool ok_; | |
| bool addr_map_read_; | |
| char symbol_buf_[SYMBOL_BUF_SIZE]; | |
| char file_cache_[FILE_CACHE_SIZE]; | |
| // tmp_buf_ will be used to store arrays of ElfW(Shdr) and ElfW(Sym) | |
| // so we ensure that tmp_buf_ is properly aligned to store either. | |
| alignas(16) char tmp_buf_[TMP_BUF_SIZE]; | |
| static_assert(alignof(ElfW(Shdr)) <= 16, | |
| "alignment of tmp buf too small for Shdr"); | |
| static_assert(alignof(ElfW(Sym)) <= 16, | |
| "alignment of tmp buf too small for Sym"); | |
| SymbolCacheLine symbol_cache_[SYMBOL_CACHE_LINES]; | |
| }; | |
| // Protect against client code closing low-valued file descriptors it doesn't | |
| // actually own. | |
| int OpenReadOnlyWithHighFD(const char *fname) { | |
| static int high_fd = [] { | |
| struct rlimit rlim{}; | |
| const int rc = getrlimit(RLIMIT_NOFILE, &rlim); | |
| if (rc == 0 && rlim.rlim_cur >= 2000) { | |
| const int max_fd = static_cast<int>(rlim.rlim_cur); | |
| // This will return 2000 on reasonably-configured systems. | |
| return std::min<int>(2000, max_fd - 1000); | |
| } | |
| ABSL_RAW_LOG(WARNING, "Unable to get high fd: rc=%d, limit=%ld", // | |
| rc, static_cast<long>(rlim.rlim_cur)); | |
| return -1; | |
| }(); | |
| constexpr int kOpenFlags = O_RDONLY | O_CLOEXEC; | |
| if (high_fd >= 1000) { | |
| const int fd = open(fname, kOpenFlags); | |
| if (fd != -1 && fd < high_fd) { | |
| // Try to relocate fd to high range. | |
| static_assert(kOpenFlags & O_CLOEXEC, | |
| "F_DUPFD_CLOEXEC assumes O_CLOEXEC"); | |
| const int fd2 = fcntl(fd, F_DUPFD_CLOEXEC, high_fd); | |
| if (fd2 != -1) { | |
| // Successfully obtained high fd. Use it. | |
| close(fd); | |
| return fd2; | |
| } else { | |
| ABSL_RAW_LOG(WARNING, "Unable to dup fd=%d above %d, errno=%d", fd, | |
| high_fd, errno); | |
| } | |
| } | |
| // Either open failed and fd==-1, or fd is already above high_fd, or fcntl | |
| // failed and fd is valid (but low). | |
| return fd; | |
| } | |
| return open(fname, kOpenFlags); | |
| } | |
| static std::atomic<Symbolizer *> g_cached_symbolizer; | |
| } // namespace | |
| static size_t SymbolizerSize() { | |
| auto pagesize = static_cast<size_t>(sysconf(_SC_PAGESIZE)); | |
| return ((sizeof(Symbolizer) - 1) / pagesize + 1) * pagesize; | |
| } | |
| // Return (and set null) g_cached_symbolized_state if it is not null. | |
| // Otherwise return a new symbolizer. | |
| static Symbolizer *AllocateSymbolizer() { | |
| base_internal::InitSigSafeArena(); | |
| Symbolizer *symbolizer = | |
| g_cached_symbolizer.exchange(nullptr, std::memory_order_acquire); | |
| if (symbolizer == nullptr) { | |
| void* ptr = base_internal::LowLevelAlloc::AllocWithArena( | |
| SymbolizerSize(), base_internal::SigSafeArena()); | |
| symbolizer = new (ptr) Symbolizer(); | |
| } | |
| symbolizer->UpdateDecoratorsIfNeeded( | |
| g_decorator_factory.load(std::memory_order_acquire)); | |
| return symbolizer; | |
| } | |
| // Set g_cached_symbolize_state to s if it is null, otherwise | |
| // delete s. | |
| static void FreeSymbolizer(Symbolizer *s) { | |
| Symbolizer *old_cached_symbolizer = nullptr; | |
| if (!g_cached_symbolizer.compare_exchange_strong(old_cached_symbolizer, s, | |
| std::memory_order_release, | |
| std::memory_order_relaxed)) { | |
| s->~Symbolizer(); | |
| base_internal::LowLevelAlloc::Free(s); | |
| } | |
| } | |
| Symbolizer::Symbolizer() : ok_(true), addr_map_read_(false) { | |
| for (SymbolCacheLine &symbol_cache_line : symbol_cache_) { | |
| for (size_t j = 0; j < std::size(symbol_cache_line.name); ++j) { | |
| symbol_cache_line.pc[j] = nullptr; | |
| symbol_cache_line.name[j] = nullptr; | |
| symbol_cache_line.age[j] = 0; | |
| } | |
| } | |
| } | |
| Symbolizer::~Symbolizer() { | |
| for (SymbolCacheLine &symbol_cache_line : symbol_cache_) { | |
| for (char *s : symbol_cache_line.name) { | |
| base_internal::LowLevelAlloc::Free(s); | |
| } | |
| } | |
| ClearAddrMap(); | |
| } | |
| void Symbolizer::UpdateDecoratorsIfNeeded( | |
| SymbolDecorator::Factory* decorator_factory) { | |
| if (decorator_factory_ == decorator_factory) return; | |
| for (SymbolCacheLine& symbol_cache_line : symbol_cache_) { | |
| for (size_t j = 0; j < std::size(symbol_cache_line.name); ++j) { | |
| symbol_cache_line.pc[j] = nullptr; | |
| base_internal::LowLevelAlloc::Free(symbol_cache_line.name[j]); | |
| symbol_cache_line.name[j] = nullptr; | |
| symbol_cache_line.age[j] = 0; | |
| } | |
| } | |
| decorator_factory_ = decorator_factory; | |
| for (size_t i = 0, end = addr_map_.Size(); i < end; ++i) { | |
| ObjFile* obj = addr_map_.At(i); | |
| obj->decorator.reset(); | |
| } | |
| } | |
| // We don't use assert() since it's not guaranteed to be | |
| // async-signal-safe. Instead we define a minimal assertion | |
| // macro. So far, we don't need pretty printing for __FILE__, etc. | |
| #define SAFE_ASSERT(expr) ((expr) ? static_cast<void>(0) : abort()) | |
| // Read up to "count" bytes from file descriptor "fd" into the buffer | |
| // starting at "buf" while handling short reads and EINTR. On | |
| // success, return the number of bytes read. Otherwise, return -1. | |
| static ssize_t ReadPersistent(int fd, void *buf, size_t count) { | |
| SAFE_ASSERT(fd >= 0); | |
| SAFE_ASSERT(count <= SSIZE_MAX); | |
| char *buf0 = reinterpret_cast<char *>(buf); | |
| size_t num_bytes = 0; | |
| while (num_bytes < count) { | |
| ssize_t len; | |
| NO_INTR(len = read(fd, buf0 + num_bytes, count - num_bytes)); | |
| if (len < 0) { // There was an error other than EINTR. | |
| ABSL_RAW_LOG(WARNING, "read failed: errno=%d", errno); | |
| return -1; | |
| } | |
| if (len == 0) { // Reached EOF. | |
| break; | |
| } | |
| num_bytes += static_cast<size_t>(len); | |
| } | |
| SAFE_ASSERT(num_bytes <= count); | |
| return static_cast<ssize_t>(num_bytes); | |
| } | |
| // Read up to "count" bytes from "offset" into the buffer starting at "buf", | |
| // while handling short reads and EINTR. On success, return the number of bytes | |
| // read. Otherwise, return -1. | |
| ssize_t CachingFile::ReadFromOffset(void *buf, size_t count, off_t offset) { | |
| char *dst = static_cast<char *>(buf); | |
| size_t read = 0; | |
| while (read < count) { | |
| // Look in cache first. | |
| if (offset >= cache_start_ && offset < cache_limit_) { | |
| const char *hit_start = &cache_[offset - cache_start_]; | |
| const size_t n = | |
| std::min(count - read, static_cast<size_t>(cache_limit_ - offset)); | |
| memcpy(dst, hit_start, n); | |
| dst += n; | |
| read += static_cast<size_t>(n); | |
| offset += static_cast<off_t>(n); | |
| continue; | |
| } | |
| cache_start_ = 0; | |
| cache_limit_ = 0; | |
| ssize_t n = pread(fd_, cache_, cache_size_, offset); | |
| if (n < 0) { | |
| if (errno == EINTR) { | |
| continue; | |
| } | |
| ABSL_RAW_LOG(WARNING, "read failed: errno=%d", errno); | |
| return -1; | |
| } | |
| if (n == 0) { // Reached EOF. | |
| break; | |
| } | |
| cache_start_ = offset; | |
| cache_limit_ = offset + static_cast<off_t>(n); | |
| // Next iteration will copy from cache into dst. | |
| } | |
| return static_cast<ssize_t>(read); | |
| } | |
| // Try reading exactly "count" bytes from "offset" bytes into the buffer | |
| // starting at "buf" while handling short reads and EINTR. On success, return | |
| // true. Otherwise, return false. | |
| bool CachingFile::ReadFromOffsetExact(void *buf, size_t count, off_t offset) { | |
| ssize_t len = ReadFromOffset(buf, count, offset); | |
| return len >= 0 && static_cast<size_t>(len) == count; | |
| } | |
| // Returns elf_header.e_type if the file pointed by fd is an ELF binary. | |
| static int FileGetElfType(CachingFile *file) { | |
| ElfW(Ehdr) elf_header; | |
| if (!file->ReadFromOffsetExact(&elf_header, sizeof(elf_header), 0)) { | |
| return -1; | |
| } | |
| if (memcmp(elf_header.e_ident, ELFMAG, SELFMAG) != 0) { | |
| return -1; | |
| } | |
| return elf_header.e_type; | |
| } | |
| // Read the section headers in the given ELF binary, and if a section | |
| // of the specified type is found, set the output to this section header | |
| // and return true. Otherwise, return false. | |
| // To keep stack consumption low, we would like this function to not get | |
| // inlined. | |
| ABSL_ATTRIBUTE_NOINLINE static bool GetSectionHeaderByType( | |
| CachingFile* file, ElfW(Half) sh_num, const off_t sh_offset, | |
| ElfW(Word) type, ElfW(Shdr) * out, char* tmp_buf, size_t tmp_buf_size) { | |
| ElfW(Shdr) *buf = reinterpret_cast<ElfW(Shdr) *>(tmp_buf); | |
| const size_t buf_entries = tmp_buf_size / sizeof(buf[0]); | |
| const size_t buf_bytes = buf_entries * sizeof(buf[0]); | |
| for (size_t i = 0; static_cast<int>(i) < sh_num;) { | |
| const size_t num_bytes_left = | |
| (static_cast<size_t>(sh_num) - i) * sizeof(buf[0]); | |
| const size_t num_bytes_to_read = | |
| (buf_bytes > num_bytes_left) ? num_bytes_left : buf_bytes; | |
| const off_t offset = sh_offset + static_cast<off_t>(i * sizeof(buf[0])); | |
| const ssize_t len = file->ReadFromOffset(buf, num_bytes_to_read, offset); | |
| if (len <= 0) { | |
| ABSL_RAW_LOG(WARNING, "Reading %zu bytes from offset %ju returned %zd.", | |
| num_bytes_to_read, static_cast<intmax_t>(offset), len); | |
| return false; | |
| } | |
| if (static_cast<size_t>(len) % sizeof(buf[0]) != 0) { | |
| ABSL_RAW_LOG( | |
| WARNING, | |
| "Reading %zu bytes from offset %jd returned %zd which is not a " | |
| "multiple of %zu.", | |
| num_bytes_to_read, static_cast<intmax_t>(offset), len, | |
| sizeof(buf[0])); | |
| return false; | |
| } | |
| const size_t num_headers_in_buf = static_cast<size_t>(len) / sizeof(buf[0]); | |
| SAFE_ASSERT(num_headers_in_buf <= buf_entries); | |
| for (size_t j = 0; j < num_headers_in_buf; ++j) { | |
| if (buf[j].sh_type == type) { | |
| *out = buf[j]; | |
| return true; | |
| } | |
| } | |
| i += num_headers_in_buf; | |
| } | |
| return false; | |
| } | |
| // There is no particular reason to limit section name to 63 characters, | |
| // but there has (as yet) been no need for anything longer either. | |
| const int kMaxSectionNameLen = 64; | |
| // Small cache to use for miscellaneous file reads. | |
| const int kSmallFileCacheSize = 100; | |
| bool ForEachSection(int fd, | |
| const std::function<bool(absl::string_view name, | |
| const ElfW(Shdr) &)> &callback) { | |
| char buf[kSmallFileCacheSize]; | |
| CachingFile file(fd, buf, sizeof(buf)); | |
| ElfW(Ehdr) elf_header; | |
| if (!file.ReadFromOffsetExact(&elf_header, sizeof(elf_header), 0)) { | |
| return false; | |
| } | |
| // Technically it can be larger, but in practice this never happens. | |
| if (elf_header.e_shentsize != sizeof(ElfW(Shdr))) { | |
| return false; | |
| } | |
| ElfW(Shdr) shstrtab; | |
| off_t shstrtab_offset = static_cast<off_t>(elf_header.e_shoff) + | |
| elf_header.e_shentsize * elf_header.e_shstrndx; | |
| if (!file.ReadFromOffsetExact(&shstrtab, sizeof(shstrtab), shstrtab_offset)) { | |
| return false; | |
| } | |
| for (int i = 0; i < elf_header.e_shnum; ++i) { | |
| ElfW(Shdr) out; | |
| off_t section_header_offset = | |
| static_cast<off_t>(elf_header.e_shoff) + elf_header.e_shentsize * i; | |
| if (!file.ReadFromOffsetExact(&out, sizeof(out), section_header_offset)) { | |
| return false; | |
| } | |
| off_t name_offset = static_cast<off_t>(shstrtab.sh_offset) + out.sh_name; | |
| char header_name[kMaxSectionNameLen]; | |
| ssize_t n_read = | |
| file.ReadFromOffset(&header_name, kMaxSectionNameLen, name_offset); | |
| if (n_read < 0) { | |
| return false; | |
| } else if (n_read > kMaxSectionNameLen) { | |
| // Long read? | |
| return false; | |
| } | |
| absl::string_view name(header_name, | |
| strnlen(header_name, static_cast<size_t>(n_read))); | |
| if (!callback(name, out)) { | |
| break; | |
| } | |
| } | |
| return true; | |
| } | |
| // name_len should include terminating '\0'. | |
| bool GetSectionHeaderByName(int fd, const char *name, size_t name_len, | |
| ElfW(Shdr) * out) { | |
| char header_name[kMaxSectionNameLen]; | |
| if (sizeof(header_name) < name_len) { | |
| ABSL_RAW_LOG(WARNING, | |
| "Section name '%s' is too long (%zu); " | |
| "section will not be found (even if present).", | |
| name, name_len); | |
| // No point in even trying. | |
| return false; | |
| } | |
| char buf[kSmallFileCacheSize]; | |
| CachingFile file(fd, buf, sizeof(buf)); | |
| ElfW(Ehdr) elf_header; | |
| if (!file.ReadFromOffsetExact(&elf_header, sizeof(elf_header), 0)) { | |
| return false; | |
| } | |
| // Technically it can be larger, but in practice this never happens. | |
| if (elf_header.e_shentsize != sizeof(ElfW(Shdr))) { | |
| return false; | |
| } | |
| ElfW(Shdr) shstrtab; | |
| off_t shstrtab_offset = static_cast<off_t>(elf_header.e_shoff) + | |
| elf_header.e_shentsize * elf_header.e_shstrndx; | |
| if (!file.ReadFromOffsetExact(&shstrtab, sizeof(shstrtab), shstrtab_offset)) { | |
| return false; | |
| } | |
| for (int i = 0; i < elf_header.e_shnum; ++i) { | |
| off_t section_header_offset = | |
| static_cast<off_t>(elf_header.e_shoff) + elf_header.e_shentsize * i; | |
| if (!file.ReadFromOffsetExact(out, sizeof(*out), section_header_offset)) { | |
| return false; | |
| } | |
| off_t name_offset = static_cast<off_t>(shstrtab.sh_offset) + out->sh_name; | |
| ssize_t n_read = file.ReadFromOffset(&header_name, name_len, name_offset); | |
| if (n_read < 0) { | |
| return false; | |
| } else if (static_cast<size_t>(n_read) != name_len) { | |
| // Short read -- name could be at end of file. | |
| continue; | |
| } | |
| if (memcmp(header_name, name, name_len) == 0) { | |
| return true; | |
| } | |
| } | |
| return false; | |
| } | |
| // Compare symbols at in the same address. | |
| // Return true if we should pick symbol1. | |
| static bool ShouldPickFirstSymbol(const ElfW(Sym) & symbol1, | |
| const ElfW(Sym) & symbol2) { | |
| // If one of the symbols is weak and the other is not, pick the one | |
| // this is not a weak symbol. | |
| char bind1 = ELF_ST_BIND(symbol1.st_info); | |
| char bind2 = ELF_ST_BIND(symbol2.st_info); | |
| if (bind1 == STB_WEAK && bind2 != STB_WEAK) return false; | |
| if (bind2 == STB_WEAK && bind1 != STB_WEAK) return true; | |
| // If one of the symbols has zero size and the other is not, pick the | |
| // one that has non-zero size. | |
| if (symbol1.st_size != 0 && symbol2.st_size == 0) { | |
| return true; | |
| } | |
| if (symbol1.st_size == 0 && symbol2.st_size != 0) { | |
| return false; | |
| } | |
| // If one of the symbols has no type and the other is not, pick the | |
| // one that has a type. | |
| char type1 = ELF_ST_TYPE(symbol1.st_info); | |
| char type2 = ELF_ST_TYPE(symbol2.st_info); | |
| if (type1 != STT_NOTYPE && type2 == STT_NOTYPE) { | |
| return true; | |
| } | |
| if (type1 == STT_NOTYPE && type2 != STT_NOTYPE) { | |
| return false; | |
| } | |
| // Pick the first one, if we still cannot decide. | |
| return true; | |
| } | |
| // Return true if an address is inside a section. | |
| static bool InSection(const void *address, ptrdiff_t relocation, | |
| const ElfW(Shdr) * section) { | |
| const char *start = reinterpret_cast<const char *>( | |
| section->sh_addr + static_cast<ElfW(Addr)>(relocation)); | |
| size_t size = static_cast<size_t>(section->sh_size); | |
| return start <= address && address < (start + size); | |
| } | |
| static const char *ComputeOffset(const char *base, ptrdiff_t offset) { | |
| // Note: cast to intptr_t to avoid undefined behavior when base evaluates to | |
| // zero and offset is non-zero. | |
| return reinterpret_cast<const char *>(reinterpret_cast<intptr_t>(base) + | |
| offset); | |
| } | |
| // Read a symbol table and look for the symbol containing the | |
| // pc. Iterate over symbols in a symbol table and look for the symbol | |
| // containing "pc". If the symbol is found, and its name fits in | |
| // out_size, the name is written into out and SYMBOL_FOUND is returned. | |
| // If the name does not fit, truncated name is written into out, | |
| // and SYMBOL_TRUNCATED is returned. Out is NUL-terminated. | |
| // If the symbol is not found, SYMBOL_NOT_FOUND is returned; | |
| // To keep stack consumption low, we would like this function to not get | |
| // inlined. | |
| ABSL_ATTRIBUTE_NOINLINE static FindSymbolResult FindSymbol( | |
| const void* const pc, CachingFile* file, char* out, size_t out_size, | |
| ptrdiff_t relocation, const ElfW(Shdr) * strtab, const ElfW(Shdr) * symtab, | |
| const ElfW(Shdr) * opd, char* tmp_buf, size_t tmp_buf_size) { | |
| if (symtab == nullptr) { | |
| return SYMBOL_NOT_FOUND; | |
| } | |
| // In the ELF specification, sh_entsize is a generic section header field that | |
| // holds the entry size in bytes for sections containing fixed-size entries. | |
| // For symbol tables (SHT_SYMTAB and SHT_DYNSYM), the ELF specification | |
| // mandates that each entry is an ElfW(Sym), so sh_entsize should always equal | |
| // sizeof(ElfW(Sym)). | |
| // | |
| // However, because sh_entsize is read directly from the untrusted object | |
| // file, a crafted or corrupt file can specify an unexpected value: | |
| // 1. Setting sh_entsize to 0 would cause a division-by-zero (SIGFPE) in the | |
| // num_symbols calculation below. | |
| // 2. Setting sh_entsize to a value other than sizeof(ElfW(Sym)) would | |
| // desynchronize our fixed-size ElfW(Sym) buffer reads from the per-entry | |
| // stride in the file. | |
| // Reject such malformed tables, mirroring the e_shentsize check we apply to | |
| // section headers. | |
| if (symtab->sh_entsize != sizeof(ElfW(Sym))) { | |
| return SYMBOL_NOT_FOUND; | |
| } | |
| // Read multiple symbols at once to save read() calls. | |
| ElfW(Sym) *buf = reinterpret_cast<ElfW(Sym) *>(tmp_buf); | |
| const size_t buf_entries = tmp_buf_size / sizeof(buf[0]); | |
| const size_t num_symbols = symtab->sh_size / symtab->sh_entsize; | |
| // On platforms using an .opd section (PowerPC & IA64), a function symbol | |
| // has the address of a function descriptor, which contains the real | |
| // starting address. However, we do not always want to use the real | |
| // starting address because we sometimes want to symbolize a function | |
| // pointer into the .opd section, e.g. FindSymbol(&foo,...). | |
| const bool pc_in_opd = kPlatformUsesOPDSections && opd != nullptr && | |
| InSection(pc, relocation, opd); | |
| const bool deref_function_descriptor_pointer = | |
| kPlatformUsesOPDSections && opd != nullptr && !pc_in_opd; | |
| ElfW(Sym) best_match; | |
| SafeMemZero(&best_match, sizeof(best_match)); | |
| bool found_match = false; | |
| for (size_t i = 0; i < num_symbols;) { | |
| off_t offset = | |
| static_cast<off_t>(symtab->sh_offset + i * symtab->sh_entsize); | |
| const size_t num_remaining_symbols = num_symbols - i; | |
| const size_t entries_in_chunk = | |
| std::min(num_remaining_symbols, buf_entries); | |
| const size_t bytes_in_chunk = entries_in_chunk * sizeof(buf[0]); | |
| const ssize_t len = file->ReadFromOffset(buf, bytes_in_chunk, offset); | |
| SAFE_ASSERT(len > 0); | |
| SAFE_ASSERT(static_cast<size_t>(len) % sizeof(buf[0]) == 0); | |
| const size_t num_symbols_in_buf = static_cast<size_t>(len) / sizeof(buf[0]); | |
| SAFE_ASSERT(num_symbols_in_buf <= entries_in_chunk); | |
| for (size_t j = 0; j < num_symbols_in_buf; ++j) { | |
| const ElfW(Sym) &symbol = buf[j]; | |
| // For a DSO, a symbol address is relocated by the loading address. | |
| // We keep the original address for opd redirection below. | |
| const char *const original_start_address = | |
| reinterpret_cast<const char *>(symbol.st_value); | |
| const char *start_address = | |
| ComputeOffset(original_start_address, relocation); | |
| #ifdef __arm__ | |
| // ARM functions are always aligned to multiples of two bytes; the | |
| // lowest-order bit in start_address is ignored by the CPU and indicates | |
| // whether the function contains ARM (0) or Thumb (1) code. We don't care | |
| // about what encoding is being used; we just want the real start address | |
| // of the function. | |
| start_address = reinterpret_cast<const char *>( | |
| reinterpret_cast<uintptr_t>(start_address) & ~1u); | |
| #endif | |
| if (deref_function_descriptor_pointer && | |
| InSection(original_start_address, /*relocation=*/0, opd)) { | |
| // The opd section is mapped into memory. Just dereference | |
| // start_address to get the first double word, which points to the | |
| // function entry. | |
| start_address = *reinterpret_cast<const char *const *>(start_address); | |
| } | |
| // If pc is inside the .opd section, it points to a function descriptor. | |
| const size_t size = pc_in_opd ? kFunctionDescriptorSize : symbol.st_size; | |
| const void *const end_address = | |
| ComputeOffset(start_address, static_cast<ptrdiff_t>(size)); | |
| if (symbol.st_value != 0 && // Skip null value symbols. | |
| symbol.st_shndx != 0 && // Skip undefined symbols. | |
| #ifdef STT_TLS | |
| ELF_ST_TYPE(symbol.st_info) != STT_TLS && // Skip thread-local data. | |
| #endif // STT_TLS | |
| ((start_address <= pc && pc < end_address) || | |
| (start_address == pc && pc == end_address))) { | |
| if (!found_match || ShouldPickFirstSymbol(symbol, best_match)) { | |
| found_match = true; | |
| best_match = symbol; | |
| } | |
| } | |
| } | |
| i += num_symbols_in_buf; | |
| } | |
| if (found_match) { | |
| const off_t off = | |
| static_cast<off_t>(strtab->sh_offset) + best_match.st_name; | |
| const ssize_t n_read = file->ReadFromOffset(out, out_size, off); | |
| if (n_read <= 0) { | |
| // This should never happen. | |
| ABSL_RAW_LOG(WARNING, | |
| "Unable to read from fd %d at offset %lld: n_read = %zd", | |
| file->fd(), static_cast<long long>(off), n_read); | |
| return SYMBOL_NOT_FOUND; | |
| } | |
| ABSL_RAW_CHECK(static_cast<size_t>(n_read) <= out_size, | |
| "ReadFromOffset read too much data."); | |
| // strtab->sh_offset points into .strtab-like section that contains | |
| // NUL-terminated strings: '\0foo\0barbaz\0...". | |
| // | |
| // sh_offset+st_name points to the start of symbol name, but we don't know | |
| // how long the symbol is, so we try to read as much as we have space for, | |
| // and usually over-read (i.e. there is a NUL somewhere before n_read). | |
| if (memchr(out, '\0', static_cast<size_t>(n_read)) == nullptr) { | |
| // Either out_size was too small (n_read == out_size and no NUL), or | |
| // we tried to read past the EOF (n_read < out_size) and .strtab is | |
| // corrupt (missing terminating NUL; should never happen for valid ELF). | |
| out[n_read - 1] = '\0'; | |
| return SYMBOL_TRUNCATED; | |
| } | |
| return SYMBOL_FOUND; | |
| } | |
| return SYMBOL_NOT_FOUND; | |
| } | |
| // Get the symbol name of "pc" from the file pointed by "fd". Process | |
| // both regular and dynamic symbol tables if necessary. | |
| // See FindSymbol() comment for description of return value. | |
| FindSymbolResult Symbolizer::GetSymbolFromObjectFile( | |
| const ObjFile &obj, const void *const pc, const ptrdiff_t relocation, | |
| char *out, size_t out_size, char *tmp_buf, size_t tmp_buf_size) { | |
| ElfW(Shdr) symtab; | |
| ElfW(Shdr) strtab; | |
| ElfW(Shdr) opd; | |
| ElfW(Shdr) *opd_ptr = nullptr; | |
| // On platforms using an .opd sections for function descriptor, read | |
| // the section header. The .opd section is in data segment and should be | |
| // loaded but we check that it is mapped just to be extra careful. | |
| if (kPlatformUsesOPDSections) { | |
| if (GetSectionHeaderByName(obj.fd, kOpdSectionName, | |
| sizeof(kOpdSectionName) - 1, &opd) && | |
| FindObjFile(reinterpret_cast<const char *>(opd.sh_addr) + relocation, | |
| opd.sh_size) != nullptr) { | |
| opd_ptr = &opd; | |
| } else { | |
| return SYMBOL_NOT_FOUND; | |
| } | |
| } | |
| CachingFile file(obj.fd, file_cache_, sizeof(file_cache_)); | |
| // Consult a regular symbol table, then fall back to the dynamic symbol table. | |
| for (const auto symbol_table_type : {SHT_SYMTAB, SHT_DYNSYM}) { | |
| if (!GetSectionHeaderByType(&file, obj.elf_header.e_shnum, | |
| static_cast<off_t>(obj.elf_header.e_shoff), | |
| static_cast<ElfW(Word)>(symbol_table_type), | |
| &symtab, tmp_buf, tmp_buf_size)) { | |
| continue; | |
| } | |
| if (!file.ReadFromOffsetExact( | |
| &strtab, sizeof(strtab), | |
| static_cast<off_t>(obj.elf_header.e_shoff + | |
| symtab.sh_link * sizeof(symtab)))) { | |
| continue; | |
| } | |
| const FindSymbolResult rc = | |
| FindSymbol(pc, &file, out, out_size, relocation, &strtab, &symtab, | |
| opd_ptr, tmp_buf, tmp_buf_size); | |
| if (rc != SYMBOL_NOT_FOUND) { | |
| return rc; | |
| } | |
| } | |
| return SYMBOL_NOT_FOUND; | |
| } | |
| namespace { | |
| // Thin wrapper around a file descriptor so that the file descriptor | |
| // gets closed for sure. | |
| class FileDescriptor { | |
| public: | |
| explicit FileDescriptor(int fd) : fd_(fd) {} | |
| FileDescriptor(const FileDescriptor &) = delete; | |
| FileDescriptor &operator=(const FileDescriptor &) = delete; | |
| ~FileDescriptor() { | |
| if (fd_ >= 0) { | |
| close(fd_); | |
| } | |
| } | |
| int get() const { return fd_; } | |
| private: | |
| const int fd_; | |
| }; | |
| // Helper class for reading lines from file. | |
| // | |
| // Note: we don't use ProcMapsIterator since the object is big (it has | |
| // a 5k array member) and uses async-unsafe functions such as sscanf() | |
| // and snprintf(). | |
| class LineReader { | |
| public: | |
| explicit LineReader(int fd, char *buf, size_t buf_len) | |
| : fd_(fd), | |
| buf_len_(buf_len), | |
| buf_(buf), | |
| bol_(buf), | |
| eol_(buf), | |
| eod_(buf) {} | |
| LineReader(const LineReader &) = delete; | |
| LineReader &operator=(const LineReader &) = delete; | |
| // Read '\n'-terminated line from file. On success, modify "bol" | |
| // and "eol", then return true. Otherwise, return false. | |
| // | |
| // Note: if the last line doesn't end with '\n', the line will be | |
| // dropped. It's an intentional behavior to make the code simple. | |
| bool ReadLine(const char **bol, const char **eol) { | |
| if (BufferIsEmpty()) { // First time. | |
| const ssize_t num_bytes = ReadPersistent(fd_, buf_, buf_len_); | |
| if (num_bytes <= 0) { // EOF or error. | |
| return false; | |
| } | |
| eod_ = buf_ + num_bytes; | |
| bol_ = buf_; | |
| } else { | |
| bol_ = eol_ + 1; // Advance to the next line in the buffer. | |
| SAFE_ASSERT(bol_ <= eod_); // "bol_" can point to "eod_". | |
| if (!HasCompleteLine()) { | |
| const auto incomplete_line_length = static_cast<size_t>(eod_ - bol_); | |
| // Move the trailing incomplete line to the beginning. | |
| memmove(buf_, bol_, incomplete_line_length); | |
| // Read text from file and append it. | |
| char *const append_pos = buf_ + incomplete_line_length; | |
| const size_t capacity_left = buf_len_ - incomplete_line_length; | |
| const ssize_t num_bytes = | |
| ReadPersistent(fd_, append_pos, capacity_left); | |
| if (num_bytes <= 0) { // EOF or error. | |
| return false; | |
| } | |
| eod_ = append_pos + num_bytes; | |
| bol_ = buf_; | |
| } | |
| } | |
| eol_ = FindLineFeed(); | |
| if (eol_ == nullptr) { // '\n' not found. Malformed line. | |
| return false; | |
| } | |
| *eol_ = '\0'; // Replace '\n' with '\0'. | |
| *bol = bol_; | |
| *eol = eol_; | |
| return true; | |
| } | |
| private: | |
| char *FindLineFeed() const { | |
| return reinterpret_cast<char *>( | |
| memchr(bol_, '\n', static_cast<size_t>(eod_ - bol_))); | |
| } | |
| bool BufferIsEmpty() const { return buf_ == eod_; } | |
| bool HasCompleteLine() const { | |
| return !BufferIsEmpty() && FindLineFeed() != nullptr; | |
| } | |
| const int fd_; | |
| const size_t buf_len_; | |
| char *const buf_; | |
| char *bol_; | |
| char *eol_; | |
| const char *eod_; // End of data in "buf_". | |
| }; | |
| } // namespace | |
| // Place the hex number read from "start" into "*hex". The pointer to | |
| // the first non-hex character or "end" is returned. | |
| static const char *GetHex(const char *start, const char *end, | |
| uint64_t *const value) { | |
| uint64_t hex = 0; | |
| const char *p; | |
| for (p = start; p < end; ++p) { | |
| int ch = *p; | |
| if ((ch >= '0' && ch <= '9') || (ch >= 'A' && ch <= 'F') || | |
| (ch >= 'a' && ch <= 'f')) { | |
| hex = (hex << 4) | | |
| static_cast<uint64_t>(ch < 'A' ? ch - '0' : (ch & 0xF) + 9); | |
| } else { // Encountered the first non-hex character. | |
| break; | |
| } | |
| } | |
| SAFE_ASSERT(p <= end); | |
| *value = hex; | |
| return p; | |
| } | |
| static const char *GetHex(const char *start, const char *end, | |
| const void **const addr) { | |
| uint64_t hex = 0; | |
| const char *p = GetHex(start, end, &hex); | |
| *addr = reinterpret_cast<void *>(hex); | |
| return p; | |
| } | |
| // Normally we are only interested in "r?x" maps. | |
| // On the PowerPC, function pointers point to descriptors in the .opd | |
| // section. The descriptors themselves are not executable code, so | |
| // we need to relax the check below to "r??". | |
| static bool ShouldUseMapping(const char *const flags) { | |
| return flags[0] == 'r' && (kPlatformUsesOPDSections || flags[2] == 'x'); | |
| } | |
| // Read /proc/self/maps and run "callback" for each mmapped file found. If | |
| // "callback" returns false, stop scanning and return true. Else continue | |
| // scanning /proc/self/maps. Return true if no parse error is found. | |
| ABSL_ATTRIBUTE_NOINLINE static bool ReadAddrMap( | |
| bool (*callback)(const char* filename, const void* const start_addr, | |
| const void* const end_addr, uint64_t offset, void* arg), | |
| void* arg, void* tmp_buf, size_t tmp_buf_size) { | |
| // Use /proc/self/task/<pid>/maps instead of /proc/self/maps. The latter | |
| // requires kernel to stop all threads, and is significantly slower when there | |
| // are 1000s of threads. | |
| char maps_path[80]; | |
| snprintf(maps_path, sizeof(maps_path), "/proc/self/task/%d/maps", getpid()); | |
| int maps_fd; | |
| NO_INTR(maps_fd = OpenReadOnlyWithHighFD(maps_path)); | |
| FileDescriptor wrapped_maps_fd(maps_fd); | |
| if (wrapped_maps_fd.get() < 0) { | |
| ABSL_RAW_LOG(WARNING, "%s: errno=%d", maps_path, errno); | |
| return false; | |
| } | |
| // Iterate over maps and look for the map containing the pc. Then | |
| // look into the symbol tables inside. | |
| LineReader reader(wrapped_maps_fd.get(), static_cast<char *>(tmp_buf), | |
| tmp_buf_size); | |
| while (true) { | |
| const char *cursor = nullptr; | |
| const char *eol = nullptr; | |
| if (!reader.ReadLine(&cursor, &eol)) { // EOF or malformed line. | |
| break; | |
| } | |
| const char *line = cursor; | |
| const void *start_address; | |
| // Start parsing line in /proc/self/maps. Here is an example: | |
| // | |
| // 08048000-0804c000 r-xp 00000000 08:01 2142121 /bin/cat | |
| // | |
| // We want start address (08048000), end address (0804c000), flags | |
| // (r-xp) and file name (/bin/cat). | |
| // Read start address. | |
| cursor = GetHex(cursor, eol, &start_address); | |
| if (cursor == eol || *cursor != '-') { | |
| ABSL_RAW_LOG(WARNING, "Corrupt /proc/self/maps line: %s", line); | |
| return false; | |
| } | |
| ++cursor; // Skip '-'. | |
| // Read end address. | |
| const void *end_address; | |
| cursor = GetHex(cursor, eol, &end_address); | |
| if (cursor == eol || *cursor != ' ') { | |
| ABSL_RAW_LOG(WARNING, "Corrupt /proc/self/maps line: %s", line); | |
| return false; | |
| } | |
| ++cursor; // Skip ' '. | |
| // Read flags. Skip flags until we encounter a space or eol. | |
| const char *const flags_start = cursor; | |
| while (cursor < eol && *cursor != ' ') { | |
| ++cursor; | |
| } | |
| // We expect at least four letters for flags (ex. "r-xp"). | |
| if (cursor == eol || cursor < flags_start + 4) { | |
| ABSL_RAW_LOG(WARNING, "Corrupt /proc/self/maps: %s", line); | |
| return false; | |
| } | |
| // Check flags. | |
| if (!ShouldUseMapping(flags_start)) { | |
| continue; // We skip this map. | |
| } | |
| ++cursor; // Skip ' '. | |
| // Read file offset. | |
| uint64_t offset; | |
| cursor = GetHex(cursor, eol, &offset); | |
| ++cursor; // Skip ' '. | |
| // Skip to file name. "cursor" now points to dev. We need to skip at least | |
| // two spaces for dev and inode. | |
| int num_spaces = 0; | |
| while (cursor < eol) { | |
| if (*cursor == ' ') { | |
| ++num_spaces; | |
| } else if (num_spaces >= 2) { | |
| // The first non-space character after skipping two spaces | |
| // is the beginning of the file name. | |
| break; | |
| } | |
| ++cursor; | |
| } | |
| // Check whether this entry corresponds to our hint table for the true | |
| // filename. | |
| bool hinted = | |
| GetFileMappingHint(&start_address, &end_address, &offset, &cursor); | |
| if (!hinted && (cursor == eol || cursor[0] == '[')) { | |
| // not an object file, typically [vdso] or [vsyscall] | |
| continue; | |
| } | |
| if (!callback(cursor, start_address, end_address, offset, arg)) break; | |
| } | |
| return true; | |
| } | |
| // Find the objfile mapped in address region containing [addr, addr + len). | |
| ObjFile *Symbolizer::FindObjFile(const void *const addr, size_t len) { | |
| for (int i = 0; i < 2; ++i) { | |
| if (!ok_) return nullptr; | |
| // Read /proc/self/maps if necessary | |
| if (!addr_map_read_) { | |
| addr_map_read_ = true; | |
| if (!ReadAddrMap(RegisterObjFile, this, tmp_buf_, TMP_BUF_SIZE)) { | |
| ok_ = false; | |
| return nullptr; | |
| } | |
| } | |
| size_t lo = 0; | |
| size_t hi = addr_map_.Size(); | |
| while (lo < hi) { | |
| size_t mid = (lo + hi) / 2; | |
| if (addr < addr_map_.At(mid)->end_addr) { | |
| hi = mid; | |
| } else { | |
| lo = mid + 1; | |
| } | |
| } | |
| if (lo != addr_map_.Size()) { | |
| ObjFile *obj = addr_map_.At(lo); | |
| SAFE_ASSERT(obj->end_addr > addr); | |
| if (addr >= obj->start_addr && | |
| len <= static_cast<size_t>(static_cast<const char*>(obj->end_addr) - | |
| static_cast<const char*>(addr))) | |
| return obj; | |
| } | |
| // The address mapping may have changed since it was last read. Retry. | |
| ClearAddrMap(); | |
| } | |
| return nullptr; | |
| } | |
| void Symbolizer::ClearAddrMap() { | |
| for (size_t i = 0; i != addr_map_.Size(); i++) { | |
| ObjFile *o = addr_map_.At(i); | |
| base_internal::LowLevelAlloc::Free(o->filename); | |
| if (o->fd >= 0) { | |
| close(o->fd); | |
| } | |
| } | |
| addr_map_.Clear(); | |
| addr_map_read_ = false; | |
| } | |
| // Callback for ReadAddrMap to register objfiles in an in-memory table. | |
| bool Symbolizer::RegisterObjFile(const char *filename, | |
| const void *const start_addr, | |
| const void *const end_addr, uint64_t offset, | |
| void *arg) { | |
| Symbolizer *impl = static_cast<Symbolizer *>(arg); | |
| // Files are supposed to be added in the increasing address order. Make | |
| // sure that's the case. | |
| size_t addr_map_size = impl->addr_map_.Size(); | |
| if (addr_map_size != 0) { | |
| ObjFile *old = impl->addr_map_.At(addr_map_size - 1); | |
| if (old->end_addr > end_addr) { | |
| ABSL_RAW_LOG(ERROR, | |
| "Unsorted addr map entry: 0x%" PRIxPTR ": %s <-> 0x%" PRIxPTR | |
| ": %s", | |
| reinterpret_cast<uintptr_t>(end_addr), filename, | |
| reinterpret_cast<uintptr_t>(old->end_addr), old->filename); | |
| return true; | |
| } else if (old->end_addr == end_addr) { | |
| // The same entry appears twice. This sometimes happens for [vdso]. | |
| if (old->start_addr != start_addr || | |
| strcmp(old->filename, filename) != 0) { | |
| ABSL_RAW_LOG(ERROR, | |
| "Duplicate addr 0x%" PRIxPTR ": %s <-> 0x%" PRIxPTR ": %s", | |
| reinterpret_cast<uintptr_t>(end_addr), filename, | |
| reinterpret_cast<uintptr_t>(old->end_addr), old->filename); | |
| } | |
| return true; | |
| } else if (old->end_addr == start_addr && | |
| reinterpret_cast<uintptr_t>(old->start_addr) - old->offset == | |
| reinterpret_cast<uintptr_t>(start_addr) - offset && | |
| strcmp(old->filename, filename) == 0) { | |
| // Two contiguous map entries that span a contiguous region of the file, | |
| // perhaps because some part of the file was mlock()ed. Combine them. | |
| old->end_addr = end_addr; | |
| return true; | |
| } | |
| } | |
| ObjFile *obj = impl->addr_map_.Add(); | |
| obj->filename = impl->CopyString(filename); | |
| obj->start_addr = start_addr; | |
| obj->end_addr = end_addr; | |
| obj->offset = offset; | |
| obj->elf_type = -1; // filled on demand | |
| obj->fd = -1; // opened on demand | |
| return true; | |
| } | |
| // This function wraps the Demangle function to provide an interface | |
| // where the input symbol is demangled in-place. | |
| // To keep stack consumption low, we would like this function to not | |
| // get inlined. | |
| ABSL_ATTRIBUTE_NOINLINE static void DemangleInplace(char* out, size_t out_size, | |
| char* tmp_buf, | |
| size_t tmp_buf_size) { | |
| if (Demangle(out, tmp_buf, tmp_buf_size)) { | |
| // Demangling succeeded. Copy to out if the space allows. | |
| size_t len = strlen(tmp_buf); | |
| if (len + 1 <= out_size) { // +1 for '\0'. | |
| SAFE_ASSERT(len < tmp_buf_size); | |
| memmove(out, tmp_buf, len + 1); | |
| } | |
| } | |
| } | |
| SymbolCacheLine *Symbolizer::GetCacheLine(const void *const pc) { | |
| uintptr_t pc0 = reinterpret_cast<uintptr_t>(pc); | |
| pc0 >>= 3; // drop the low 3 bits | |
| // Shuffle bits. | |
| pc0 ^= (pc0 >> 6) ^ (pc0 >> 12) ^ (pc0 >> 18); | |
| return &symbol_cache_[pc0 % SYMBOL_CACHE_LINES]; | |
| } | |
| void Symbolizer::AgeSymbols(SymbolCacheLine *line) { | |
| for (uint32_t &age : line->age) { | |
| ++age; | |
| } | |
| } | |
| const char *Symbolizer::FindSymbolInCache(const void *const pc) { | |
| if (pc == nullptr) return nullptr; | |
| SymbolCacheLine *line = GetCacheLine(pc); | |
| for (size_t i = 0; i < std::size(line->pc); ++i) { | |
| if (line->pc[i] == pc) { | |
| AgeSymbols(line); | |
| line->age[i] = 0; | |
| return line->name[i]; | |
| } | |
| } | |
| return nullptr; | |
| } | |
| const char *Symbolizer::InsertSymbolInCache(const void *const pc, | |
| const char *name) { | |
| SAFE_ASSERT(pc != nullptr); | |
| SymbolCacheLine *line = GetCacheLine(pc); | |
| uint32_t max_age = 0; | |
| size_t oldest_index = 0; | |
| bool found_oldest_index = false; | |
| for (size_t i = 0; i < std::size(line->pc); ++i) { | |
| if (line->pc[i] == nullptr) { | |
| AgeSymbols(line); | |
| line->pc[i] = pc; | |
| line->name[i] = CopyString(name); | |
| line->age[i] = 0; | |
| return line->name[i]; | |
| } | |
| if (line->age[i] >= max_age) { | |
| max_age = line->age[i]; | |
| oldest_index = i; | |
| found_oldest_index = true; | |
| } | |
| } | |
| AgeSymbols(line); | |
| ABSL_RAW_CHECK(found_oldest_index, "Corrupt cache"); | |
| base_internal::LowLevelAlloc::Free(line->name[oldest_index]); | |
| line->pc[oldest_index] = pc; | |
| line->name[oldest_index] = CopyString(name); | |
| line->age[oldest_index] = 0; | |
| return line->name[oldest_index]; | |
| } | |
| static void MaybeOpenFdFromSelfExe(ObjFile *obj) { | |
| if (memcmp(obj->start_addr, ELFMAG, SELFMAG) != 0) { | |
| return; | |
| } | |
| int fd = OpenReadOnlyWithHighFD("/proc/self/exe"); | |
| if (fd == -1) { | |
| return; | |
| } | |
| // Verify that contents of /proc/self/exe matches in-memory image of | |
| // the binary. This can fail if the "deleted" binary is in fact not | |
| // the main executable, or for binaries that have the first PT_LOAD | |
| // segment smaller than 4K. We do it in four steps so that the | |
| // buffer is smaller and we don't consume too much stack space. | |
| const char *mem = reinterpret_cast<const char *>(obj->start_addr); | |
| for (int i = 0; i < 4; ++i) { | |
| char buf[1024]; | |
| ssize_t n = read(fd, buf, sizeof(buf)); | |
| if (n != sizeof(buf) || memcmp(buf, mem, sizeof(buf)) != 0) { | |
| close(fd); | |
| return; | |
| } | |
| mem += sizeof(buf); | |
| } | |
| obj->fd = fd; | |
| } | |
| static bool MaybeInitializeObjFile( | |
| ObjFile* obj, SymbolDecorator::Factory* decorator_factory) { | |
| if (obj->fd < 0) { | |
| obj->fd = OpenReadOnlyWithHighFD(obj->filename); | |
| if (obj->fd < 0) { | |
| // Getting /proc/self/exe here means that we were hinted. | |
| if (strcmp(obj->filename, "/proc/self/exe") == 0) { | |
| // /proc/self/exe may be inaccessible (due to setuid, etc.), so try | |
| // accessing the binary via argv0. | |
| if (argv0_value != nullptr) { | |
| obj->fd = OpenReadOnlyWithHighFD(argv0_value); | |
| } | |
| } else { | |
| MaybeOpenFdFromSelfExe(obj); | |
| } | |
| } | |
| if (obj->fd < 0) { | |
| ABSL_RAW_LOG(WARNING, "%s: open failed: errno=%d", obj->filename, errno); | |
| return false; | |
| } | |
| char buf[kSmallFileCacheSize]; | |
| CachingFile file(obj->fd, buf, sizeof(buf)); | |
| obj->elf_type = FileGetElfType(&file); | |
| if (obj->elf_type < 0) { | |
| ABSL_RAW_LOG(WARNING, "%s: wrong elf type: %d", obj->filename, | |
| obj->elf_type); | |
| return false; | |
| } | |
| if (!file.ReadFromOffsetExact(&obj->elf_header, sizeof(obj->elf_header), | |
| 0)) { | |
| ABSL_RAW_LOG(WARNING, "%s: failed to read elf header", obj->filename); | |
| return false; | |
| } | |
| const int phnum = obj->elf_header.e_phnum; | |
| const int phentsize = obj->elf_header.e_phentsize; | |
| auto phoff = static_cast<off_t>(obj->elf_header.e_phoff); | |
| size_t num_interesting_load_segments = 0; | |
| for (int j = 0; j < phnum; j++) { | |
| ElfW(Phdr) phdr; | |
| if (!file.ReadFromOffsetExact(&phdr, sizeof(phdr), phoff)) { | |
| ABSL_RAW_LOG(WARNING, "%s: failed to read program header %d", | |
| obj->filename, j); | |
| return false; | |
| } | |
| phoff += phentsize; | |
| #ifdef ABSL_INTERNAL_HAVE_PPC64_ELFV1_ABI | |
| // On the PowerPC 64-bit ELFv1 ABI, function pointers actually point to | |
| // function descriptors. These descriptors are stored in an .opd section, | |
| // which is mapped read-only. We thus need to look at all readable | |
| // segments, not just the executable ones. | |
| constexpr int interesting = PF_R; | |
| #else | |
| constexpr int interesting = PF_X | PF_R; | |
| #endif | |
| if (phdr.p_type != PT_LOAD || | |
| (phdr.p_flags & interesting) != interesting) { | |
| // Not a LOAD segment, not executable code, and not a function | |
| // descriptor. | |
| continue; | |
| } | |
| if (num_interesting_load_segments < obj->phdr.size()) { | |
| memcpy(&obj->phdr[num_interesting_load_segments++], &phdr, | |
| sizeof(phdr)); | |
| } else { | |
| ABSL_RAW_LOG( | |
| WARNING, "%s: too many interesting LOAD segments: %zu >= %zu", | |
| obj->filename, num_interesting_load_segments, obj->phdr.size()); | |
| break; | |
| } | |
| } | |
| if (num_interesting_load_segments == 0) { | |
| // This object has no interesting LOAD segments. That's unexpected. | |
| ABSL_RAW_LOG(WARNING, "%s: no interesting LOAD segments", obj->filename); | |
| return false; | |
| } | |
| } | |
| if (decorator_factory != nullptr && obj->decorator == nullptr) { | |
| obj->decorator = decorator_factory(obj->fd); | |
| } | |
| return true; | |
| } | |
| // The implementation of our symbolization routine. If it | |
| // successfully finds the symbol containing "pc" and obtains the | |
| // symbol name, returns pointer to that symbol. Otherwise, returns nullptr. | |
| // If any symbol decorators have been installed via InstallSymbolDecorator(), | |
| // they are called here as well. | |
| // To keep stack consumption low, we would like this function to not | |
| // get inlined. | |
| const char *Symbolizer::GetUncachedSymbol(const void *pc) { | |
| ObjFile *const obj = FindObjFile(pc, 1); | |
| ptrdiff_t relocation = 0; | |
| if (obj != nullptr) { | |
| if (MaybeInitializeObjFile(obj, decorator_factory_)) { | |
| const size_t start_addr = reinterpret_cast<size_t>(obj->start_addr); | |
| if (obj->elf_type == ET_DYN && start_addr >= obj->offset) { | |
| // This object was relocated. | |
| // | |
| // For obj->offset > 0, adjust the relocation since a mapping at offset | |
| // X in the file will have a start address of [true relocation]+X. | |
| relocation = static_cast<ptrdiff_t>(start_addr - obj->offset); | |
| // Note: some binaries have multiple LOAD segments that can contain | |
| // function pointers. We must find the right one. | |
| ElfW(Phdr) *phdr = nullptr; | |
| for (size_t j = 0; j < obj->phdr.size(); j++) { | |
| ElfW(Phdr) &p = obj->phdr[j]; | |
| if (p.p_type != PT_LOAD) { | |
| // We only expect PT_LOADs. This must be PT_NULL that we didn't | |
| // write over (i.e. we exhausted all interesting PT_LOADs). | |
| ABSL_RAW_CHECK(p.p_type == PT_NULL, "unexpected p_type"); | |
| break; | |
| } | |
| if (pc < | |
| reinterpret_cast<void *>(start_addr + p.p_vaddr + p.p_memsz)) { | |
| phdr = &p; | |
| break; | |
| } | |
| } | |
| if (phdr == nullptr) { | |
| // That's unexpected. Hope for the best. | |
| ABSL_RAW_LOG( | |
| WARNING, | |
| "%s: unable to find LOAD segment for pc: %p, start_addr: %zx", | |
| obj->filename, pc, start_addr); | |
| } else { | |
| // Adjust relocation in case phdr.p_vaddr != 0. | |
| // This happens for binaries linked with `lld --rosegment`, and for | |
| // binaries linked with BFD `ld -z separate-code`. | |
| relocation -= phdr->p_vaddr - phdr->p_offset; | |
| } | |
| } | |
| if (GetSymbolFromObjectFile(*obj, pc, relocation, symbol_buf_, | |
| sizeof(symbol_buf_), tmp_buf_, | |
| sizeof(tmp_buf_)) == SYMBOL_FOUND) { | |
| // Only try to demangle the symbol name if it fit into symbol_buf_. | |
| DemangleInplace(symbol_buf_, sizeof(symbol_buf_), tmp_buf_, | |
| sizeof(tmp_buf_)); | |
| } | |
| } | |
| } else { | |
| #if ABSL_HAVE_VDSO_SUPPORT | |
| VDSOSupport vdso; | |
| if (vdso.IsPresent()) { | |
| VDSOSupport::SymbolInfo symbol_info; | |
| if (vdso.LookupSymbolByAddress(pc, &symbol_info)) { | |
| // All VDSO symbols are known to be short. | |
| size_t len = strlen(symbol_info.name); | |
| ABSL_RAW_CHECK(len + 1 < sizeof(symbol_buf_), | |
| "VDSO symbol unexpectedly long"); | |
| memcpy(symbol_buf_, symbol_info.name, len + 1); | |
| } | |
| } | |
| #endif | |
| } | |
| if (obj != nullptr && obj->decorator != nullptr) { | |
| obj->decorator->Decorate(pc, relocation, symbol_buf_, sizeof(symbol_buf_), | |
| tmp_buf_, sizeof(tmp_buf_)); | |
| } | |
| if (symbol_buf_[0] == '\0') { | |
| return nullptr; | |
| } | |
| symbol_buf_[sizeof(symbol_buf_) - 1] = '\0'; // Paranoia. | |
| return InsertSymbolInCache(pc, symbol_buf_); | |
| } | |
| const char *Symbolizer::GetSymbol(const void *pc) { | |
| const char *entry = FindSymbolInCache(pc); | |
| if (entry != nullptr) { | |
| return entry; | |
| } | |
| symbol_buf_[0] = '\0'; | |
| #ifdef __hppa__ | |
| { | |
| // In some contexts (e.g., return addresses), PA-RISC uses the lowest two | |
| // bits of the address to indicate the privilege level. Clear those bits | |
| // before trying to symbolize. | |
| const auto pc_bits = reinterpret_cast<uintptr_t>(pc); | |
| const auto address = pc_bits & ~0x3; | |
| entry = GetUncachedSymbol(reinterpret_cast<const void *>(address)); | |
| if (entry != nullptr) { | |
| return entry; | |
| } | |
| // In some contexts, PA-RISC also uses bit 1 of the address to indicate that | |
| // this is a cross-DSO function pointer. Such function pointers actually | |
| // point to a procedure label, a struct whose first 32-bit (pointer) element | |
| // actually points to the function text. With no symbol found for this | |
| // address so far, try interpreting it as a cross-DSO function pointer and | |
| // see how that goes. | |
| if (pc_bits & 0x2) { | |
| return GetUncachedSymbol(*reinterpret_cast<const void *const *>(address)); | |
| } | |
| return nullptr; | |
| } | |
| #else | |
| return GetUncachedSymbol(pc); | |
| #endif | |
| } | |
| SymbolDecorator::Factory* SetSymbolDecoratorFactory( | |
| SymbolDecorator::Factory* factory) { | |
| return g_decorator_factory.exchange(factory, std::memory_order_acq_rel); | |
| } | |
| bool RegisterFileMappingHint(const void *start, const void *end, | |
| uint64_t offset, const char *filename) { | |
| SAFE_ASSERT(start <= end); | |
| SAFE_ASSERT(filename != nullptr); | |
| base_internal::InitSigSafeArena(); | |
| if (!g_file_mapping_mu.try_lock()) { | |
| return false; | |
| } | |
| bool ret = true; | |
| if (g_num_file_mapping_hints >= kMaxFileMappingHints) { | |
| ret = false; | |
| } else { | |
| // TODO(ckennelly): Move this into a string copy routine. | |
| size_t len = strlen(filename); | |
| char *dst = | |
| static_cast<char *>(base_internal::LowLevelAlloc::AllocWithArena( | |
| len + 1, base_internal::SigSafeArena())); | |
| ABSL_RAW_CHECK(dst != nullptr, "out of memory"); | |
| memcpy(dst, filename, len + 1); | |
| auto &hint = g_file_mapping_hints[g_num_file_mapping_hints++]; | |
| hint.start = start; | |
| hint.end = end; | |
| hint.offset = offset; | |
| hint.filename = dst; | |
| } | |
| g_file_mapping_mu.unlock(); | |
| return ret; | |
| } | |
| bool GetFileMappingHint(const void **start, const void **end, uint64_t *offset, | |
| const char **filename) { | |
| if (!g_file_mapping_mu.try_lock()) { | |
| return false; | |
| } | |
| bool found = false; | |
| for (int i = 0; i < g_num_file_mapping_hints; i++) { | |
| if (g_file_mapping_hints[i].start <= *start && | |
| *end <= g_file_mapping_hints[i].end) { | |
| // We assume that the start_address for the mapping is the base | |
| // address of the ELF section, but when [start_address,end_address) is | |
| // not strictly equal to [hint.start, hint.end), that assumption is | |
| // invalid. | |
| // | |
| // This uses the hint's start address (even though hint.start is not | |
| // necessarily equal to start_address) to ensure the correct | |
| // relocation is computed later. | |
| *start = g_file_mapping_hints[i].start; | |
| *end = g_file_mapping_hints[i].end; | |
| *offset = g_file_mapping_hints[i].offset; | |
| *filename = g_file_mapping_hints[i].filename; | |
| found = true; | |
| break; | |
| } | |
| } | |
| g_file_mapping_mu.unlock(); | |
| return found; | |
| } | |
| } // namespace debugging_internal | |
| bool Symbolize(const void *pc, char *out, int out_size) { | |
| // Symbolization is very slow under tsan. | |
| ABSL_ANNOTATE_IGNORE_READS_AND_WRITES_BEGIN(); | |
| SAFE_ASSERT(out_size >= 0); | |
| debugging_internal::Symbolizer *s = debugging_internal::AllocateSymbolizer(); | |
| const char *name = s->GetSymbol(pc); | |
| bool ok = false; | |
| if (name != nullptr && out_size > 0) { | |
| strncpy(out, name, static_cast<size_t>(out_size)); | |
| ok = true; | |
| if (out[static_cast<size_t>(out_size) - 1] != '\0') { | |
| // strncpy() does not '\0' terminate when it truncates. Do so, with | |
| // trailing ellipsis. | |
| static constexpr char kEllipsis[] = "..."; | |
| size_t ellipsis_size = | |
| std::min(strlen(kEllipsis), static_cast<size_t>(out_size) - 1); | |
| memcpy(out + static_cast<size_t>(out_size) - ellipsis_size - 1, kEllipsis, | |
| ellipsis_size); | |
| out[static_cast<size_t>(out_size) - 1] = '\0'; | |
| } | |
| } | |
| debugging_internal::FreeSymbolizer(s); | |
| ABSL_ANNOTATE_IGNORE_READS_AND_WRITES_END(); | |
| return ok; | |
| } | |
| ABSL_NAMESPACE_END | |
| } // namespace absl | |
| extern "C" bool ABSL_INTERNAL_C_SYMBOL(AbslInternalGetFileMappingHint)( | |
| const void** start, const void** end, uint64_t* offset, | |
| const char** filename) { | |
| return absl::debugging_internal::GetFileMappingHint(start, end, offset, | |
| filename); | |
| } | |
| #undef ABSL_INTERNAL_HAVE_PPC64_ELFV1_ABI |