| // Copyright 2017 The Abseil Authors. | |
| // | |
| // Licensed under the Apache License, Version 2.0 (the "License"); | |
| // you may not use this file except in compliance with the License. | |
| // You may obtain a copy of the License at | |
| // | |
| // https://www.apache.org/licenses/LICENSE-2.0 | |
| // | |
| // Unless required by applicable law or agreed to in writing, software | |
| // distributed under the License is distributed on an "AS IS" BASIS, | |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |
| // See the License for the specific language governing permissions and | |
| // limitations under the License. | |
| #ifndef ABSL_RANDOM_POISSON_DISTRIBUTION_H_ | |
| #define ABSL_RANDOM_POISSON_DISTRIBUTION_H_ | |
| #include <cassert> | |
| #include <cmath> | |
| #include <cstdint> | |
| #include <istream> | |
| #include <limits> | |
| #include <ostream> | |
| #include "absl/base/config.h" | |
| #include "absl/random/internal/fast_uniform_bits.h" | |
| #include "absl/random/internal/fastmath.h" | |
| #include "absl/random/internal/generate_real.h" | |
| #include "absl/random/internal/iostream_state_saver.h" | |
| #include "absl/random/internal/traits.h" | |
| namespace absl { | |
| ABSL_NAMESPACE_BEGIN | |
| // absl::poisson_distribution: | |
| // Generates discrete variates conforming to a Poisson distribution. | |
| // p(n) = (mean^n / n!) exp(-mean) | |
| // | |
| // Depending on the parameter, the distribution selects one of the following | |
| // algorithms: | |
| // * The standard algorithm, attributed to Knuth, extended using a split method | |
| // for larger values | |
| // * The "Ratio of Uniforms as a convenient method for sampling from classical | |
| // discrete distributions", Stadlober, 1989. | |
| // http://www.sciencedirect.com/science/article/pii/0377042790903495 | |
| // | |
| // NOTE: param_type.mean() is a double, which permits values larger than | |
| // poisson_distribution<IntType>::max(), however this should be avoided and | |
| // the distribution results are limited to the max() value. | |
| // | |
| // The goals of this implementation are to provide good performance while still | |
| // being thread-safe: This limits the implementation to not using lgamma | |
| // provided by <math.h>. | |
| // | |
| template <typename IntType = int> | |
| class poisson_distribution { | |
| public: | |
| using result_type = IntType; | |
| class param_type { | |
| public: | |
| using distribution_type = poisson_distribution; | |
| explicit param_type(double mean = 1.0); | |
| double mean() const { return mean_; } | |
| friend bool operator==(const param_type& a, const param_type& b) { | |
| return a.mean_ == b.mean_; | |
| } | |
| friend bool operator!=(const param_type& a, const param_type& b) { | |
| return !(a == b); | |
| } | |
| private: | |
| friend class poisson_distribution; | |
| double mean_; | |
| double emu_; // e ^ -mean_ | |
| double lmu_; // ln(mean_) | |
| double s_; | |
| double log_k_; | |
| int split_; | |
| static_assert(random_internal::IsIntegral<IntType>::value, | |
| "Class-template absl::poisson_distribution<> must be " | |
| "parameterized using an integral type."); | |
| }; | |
| poisson_distribution() : poisson_distribution(1.0) {} | |
| explicit poisson_distribution(double mean) : param_(mean) {} | |
| explicit poisson_distribution(const param_type& p) : param_(p) {} | |
| void reset() {} | |
| // generating functions | |
| template <typename URBG> | |
| result_type operator()(URBG& g) { // NOLINT(runtime/references) | |
| return (*this)(g, param_); | |
| } | |
| template <typename URBG> | |
| result_type operator()(URBG& g, // NOLINT(runtime/references) | |
| const param_type& p); | |
| param_type param() const { return param_; } | |
| void param(const param_type& p) { param_ = p; } | |
| result_type(min)() const { return 0; } | |
| result_type(max)() const { return (std::numeric_limits<result_type>::max)(); } | |
| double mean() const { return param_.mean(); } | |
| friend bool operator==(const poisson_distribution& a, | |
| const poisson_distribution& b) { | |
| return a.param_ == b.param_; | |
| } | |
| friend bool operator!=(const poisson_distribution& a, | |
| const poisson_distribution& b) { | |
| return a.param_ != b.param_; | |
| } | |
| private: | |
| param_type param_; | |
| random_internal::FastUniformBits<uint64_t> fast_u64_; | |
| }; | |
| // ----------------------------------------------------------------------------- | |
| // Implementation details follow | |
| // ----------------------------------------------------------------------------- | |
| template <typename IntType> | |
| poisson_distribution<IntType>::param_type::param_type(double mean) | |
| : mean_(mean), split_(0) { | |
| assert(mean >= 0); | |
| assert(mean <= | |
| static_cast<double>((std::numeric_limits<result_type>::max)())); | |
| // As a defensive measure, avoid large values of the mean. The rejection | |
| // algorithm used does not support very large values well. It my be worth | |
| // changing algorithms to better deal with these cases. | |
| assert(mean <= 1e10); | |
| if (mean_ < 10) { | |
| // For small lambda, use the knuth method. | |
| split_ = 1; | |
| emu_ = std::exp(-mean_); | |
| } else if (mean_ <= 50) { | |
| // Use split-knuth method. | |
| split_ = 1 + static_cast<int>(mean_ / 10.0); | |
| emu_ = std::exp(-mean_ / static_cast<double>(split_)); | |
| } else { | |
| // Use ratio of uniforms method. | |
| constexpr double k2E = 0.7357588823428846; | |
| constexpr double kSA = 0.4494580810294493; | |
| lmu_ = std::log(mean_); | |
| double a = mean_ + 0.5; | |
| s_ = kSA + std::sqrt(k2E * a); | |
| const double mode = std::ceil(mean_) - 1; | |
| log_k_ = lmu_ * mode - absl::random_internal::StirlingLogFactorial(mode); | |
| } | |
| } | |
| template <typename IntType> | |
| template <typename URBG> | |
| typename poisson_distribution<IntType>::result_type | |
| poisson_distribution<IntType>::operator()( | |
| URBG& g, // NOLINT(runtime/references) | |
| const param_type& p) { | |
| using random_internal::GeneratePositiveTag; | |
| using random_internal::GenerateRealFromBits; | |
| using random_internal::GenerateSignedTag; | |
| if (p.split_ != 0) { | |
| // Use Knuth's algorithm with range splitting to avoid floating-point | |
| // errors. Knuth's algorithm is: Ui is a sequence of uniform variates on | |
| // (0,1); return the number of variates required for product(Ui) < | |
| // exp(-lambda). | |
| // | |
| // The expected number of variates required for Knuth's method can be | |
| // computed as follows: | |
| // The expected value of U is 0.5, so solving for 0.5^n < exp(-lambda) gives | |
| // the expected number of uniform variates | |
| // required for a given lambda, which is: | |
| // lambda = [2, 5, 9, 10, 11, 12, 13, 14, 15, 16, 17] | |
| // n = [3, 8, 13, 15, 16, 18, 19, 21, 22, 24, 25] | |
| // | |
| result_type n = 0; | |
| for (int split = p.split_; split > 0; --split) { | |
| double r = 1.0; | |
| do { | |
| r *= GenerateRealFromBits<double, GeneratePositiveTag, true>( | |
| fast_u64_(g)); // U(-1, 0) | |
| ++n; | |
| } while (r > p.emu_); | |
| --n; | |
| } | |
| return n; | |
| } | |
| // Use ratio of uniforms method. | |
| // | |
| // Let u ~ Uniform(0, 1), v ~ Uniform(-1, 1), | |
| // a = lambda + 1/2, | |
| // s = 1.5 - sqrt(3/e) + sqrt(2(lambda + 1/2)/e), | |
| // x = s * v/u + a. | |
| // P(floor(x) = k | u^2 < f(floor(x))/k), where | |
| // f(m) = lambda^m exp(-lambda)/ m!, for 0 <= m, and f(m) = 0 otherwise, | |
| // and k = max(f). | |
| const double a = p.mean_ + 0.5; | |
| for (;;) { | |
| const double u = GenerateRealFromBits<double, GeneratePositiveTag, false>( | |
| fast_u64_(g)); // U(0, 1) | |
| const double v = GenerateRealFromBits<double, GenerateSignedTag, false>( | |
| fast_u64_(g)); // U(-1, 1) | |
| const double x = std::floor(p.s_ * v / u + a); | |
| if (x < 0) continue; // f(negative) = 0 | |
| const double rhs = x * p.lmu_; | |
| // clang-format off | |
| double s = (x <= 1.0) ? 0.0 | |
| : (x == 2.0) ? 0.693147180559945 | |
| : absl::random_internal::StirlingLogFactorial(x); | |
| // clang-format on | |
| const double lhs = 2.0 * std::log(u) + p.log_k_ + s; | |
| if (lhs < rhs) { | |
| return x > static_cast<double>((max)()) | |
| ? (max)() | |
| : static_cast<result_type>(x); // f(x)/k >= u^2 | |
| } | |
| } | |
| } | |
| template <typename CharT, typename Traits, typename IntType> | |
| std::basic_ostream<CharT, Traits>& operator<<( | |
| std::basic_ostream<CharT, Traits>& os, // NOLINT(runtime/references) | |
| const poisson_distribution<IntType>& x) { | |
| auto saver = random_internal::make_ostream_state_saver(os); | |
| os.precision(random_internal::stream_precision_helper<double>::kPrecision); | |
| os << x.mean(); | |
| return os; | |
| } | |
| template <typename CharT, typename Traits, typename IntType> | |
| std::basic_istream<CharT, Traits>& operator>>( | |
| std::basic_istream<CharT, Traits>& is, // NOLINT(runtime/references) | |
| poisson_distribution<IntType>& x) { // NOLINT(runtime/references) | |
| using param_type = typename poisson_distribution<IntType>::param_type; | |
| auto saver = random_internal::make_istream_state_saver(is); | |
| double mean = random_internal::read_floating_point<double>(is); | |
| if (!is.fail()) { | |
| x.param(param_type(mean)); | |
| } | |
| return is; | |
| } | |
| ABSL_NAMESPACE_END | |
| } // namespace absl | |
| #endif // ABSL_RANDOM_POISSON_DISTRIBUTION_H_ |