| // Copyright 2018 The Abseil Authors. | |
| // | |
| // Licensed under the Apache License, Version 2.0 (the "License"); | |
| // you may not use this file except in compliance with the License. | |
| // You may obtain a copy of the License at | |
| // | |
| // https://www.apache.org/licenses/LICENSE-2.0 | |
| // | |
| // Unless required by applicable law or agreed to in writing, software | |
| // distributed under the License is distributed on an "AS IS" BASIS, | |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |
| // See the License for the specific language governing permissions and | |
| // limitations under the License. | |
| // A btree implementation of the STL set and map interfaces. A btree is smaller | |
| // and generally also faster than STL set/map (refer to the benchmarks below). | |
| // The red-black tree implementation of STL set/map has an overhead of 3 | |
| // pointers (left, right and parent) plus the node color information for each | |
| // stored value. So a set<int32_t> consumes 40 bytes for each value stored in | |
| // 64-bit mode. This btree implementation stores multiple values on fixed | |
| // size nodes (usually 256 bytes) and doesn't store child pointers for leaf | |
| // nodes. The result is that a btree_set<int32_t> may use much less memory per | |
| // stored value. For the random insertion benchmark in btree_bench.cc, a | |
| // btree_set<int32_t> with node-size of 256 uses 5.1 bytes per stored value. | |
| // | |
| // The packing of multiple values on to each node of a btree has another effect | |
| // besides better space utilization: better cache locality due to fewer cache | |
| // lines being accessed. Better cache locality translates into faster | |
| // operations. | |
| // | |
| // CAVEATS | |
| // | |
| // Insertions and deletions on a btree can cause splitting, merging or | |
| // rebalancing of btree nodes. And even without these operations, insertions | |
| // and deletions on a btree will move values around within a node. In both | |
| // cases, the result is that insertions and deletions can invalidate iterators | |
| // pointing to values other than the one being inserted/deleted. Therefore, this | |
| // container does not provide pointer stability. This is notably different from | |
| // STL set/map which takes care to not invalidate iterators on insert/erase | |
| // except, of course, for iterators pointing to the value being erased. A | |
| // partial workaround when erasing is available: erase() returns an iterator | |
| // pointing to the item just after the one that was erased (or end() if none | |
| // exists). | |
| #ifndef ABSL_CONTAINER_INTERNAL_BTREE_H_ | |
| #define ABSL_CONTAINER_INTERNAL_BTREE_H_ | |
| #include <algorithm> | |
| #include <cassert> | |
| #include <cstddef> | |
| #include <cstdint> | |
| #include <cstring> | |
| #include <functional> | |
| #include <iterator> | |
| #include <limits> | |
| #include <memory> | |
| #include <string> | |
| #include <type_traits> | |
| #include <utility> | |
| #include "absl/base/config.h" | |
| #include "absl/base/internal/hardening.h" | |
| #include "absl/base/internal/raw_logging.h" | |
| #include "absl/base/macros.h" | |
| #include "absl/base/optimization.h" | |
| #include "absl/container/internal/common.h" | |
| #include "absl/container/internal/common_policy_traits.h" | |
| #include "absl/container/internal/compressed_tuple.h" | |
| #include "absl/container/internal/container_memory.h" | |
| #include "absl/container/internal/layout.h" | |
| #include "absl/memory/memory.h" | |
| #include "absl/meta/type_traits.h" | |
| #include "absl/strings/cord.h" | |
| #include "absl/strings/string_view.h" | |
| #include "absl/types/compare.h" | |
| namespace absl { | |
| ABSL_NAMESPACE_BEGIN | |
| namespace container_internal { | |
| #ifdef ABSL_BTREE_ENABLE_GENERATIONS | |
| #error ABSL_BTREE_ENABLE_GENERATIONS cannot be directly set | |
| #elif (defined(ABSL_HAVE_ADDRESS_SANITIZER) || \ | |
| defined(ABSL_HAVE_HWADDRESS_SANITIZER) || \ | |
| defined(ABSL_HAVE_MEMORY_SANITIZER)) && \ | |
| !defined(NDEBUG_SANITIZER) // If defined, performance is important. | |
| // When compiled in sanitizer mode, we add generation integers to the nodes and | |
| // iterators. When iterators are used, we validate that the container has not | |
| // been mutated since the iterator was constructed. | |
| #define ABSL_BTREE_ENABLE_GENERATIONS | |
| #endif | |
| #ifdef ABSL_BTREE_ENABLE_GENERATIONS | |
| constexpr bool BtreeGenerationsEnabled() { return true; } | |
| #else | |
| constexpr bool BtreeGenerationsEnabled() { return false; } | |
| #endif | |
| template <typename Compare, typename T, typename U> | |
| using compare_result_t = | |
| std::invoke_result_t<const Compare, const T &, const U &>; | |
| // A helper class that indicates if the Compare parameter is a key-compare-to | |
| // comparator. | |
| template <typename Compare, typename T> | |
| using btree_is_key_compare_to = | |
| std::is_convertible<compare_result_t<Compare, T, T>, absl::weak_ordering>; | |
| struct StringBtreeDefaultLess { | |
| using is_transparent = void; | |
| StringBtreeDefaultLess() = default; | |
| // Compatibility constructor. | |
| StringBtreeDefaultLess(std::less<std::string>) {} // NOLINT | |
| StringBtreeDefaultLess(std::less<absl::string_view>) {} // NOLINT | |
| // Allow converting to std::less for use in key_comp()/value_comp(). | |
| explicit operator std::less<std::string>() const { return {}; } | |
| explicit operator std::less<absl::string_view>() const { return {}; } | |
| explicit operator std::less<absl::Cord>() const { return {}; } | |
| absl::weak_ordering operator()(absl::string_view lhs, | |
| absl::string_view rhs) const { | |
| return compare_internal::compare_result_as_ordering(lhs.compare(rhs)); | |
| } | |
| StringBtreeDefaultLess(std::less<absl::Cord>) {} // NOLINT | |
| absl::weak_ordering operator()(const absl::Cord &lhs, | |
| const absl::Cord &rhs) const { | |
| return compare_internal::compare_result_as_ordering(lhs.Compare(rhs)); | |
| } | |
| absl::weak_ordering operator()(const absl::Cord &lhs, | |
| absl::string_view rhs) const { | |
| return compare_internal::compare_result_as_ordering(lhs.Compare(rhs)); | |
| } | |
| absl::weak_ordering operator()(absl::string_view lhs, | |
| const absl::Cord &rhs) const { | |
| return compare_internal::compare_result_as_ordering(-rhs.Compare(lhs)); | |
| } | |
| }; | |
| struct StringBtreeDefaultGreater { | |
| using is_transparent = void; | |
| StringBtreeDefaultGreater() = default; | |
| StringBtreeDefaultGreater(std::greater<std::string>) {} // NOLINT | |
| StringBtreeDefaultGreater(std::greater<absl::string_view>) {} // NOLINT | |
| // Allow converting to std::greater for use in key_comp()/value_comp(). | |
| explicit operator std::greater<std::string>() const { return {}; } | |
| explicit operator std::greater<absl::string_view>() const { return {}; } | |
| explicit operator std::greater<absl::Cord>() const { return {}; } | |
| absl::weak_ordering operator()(absl::string_view lhs, | |
| absl::string_view rhs) const { | |
| return compare_internal::compare_result_as_ordering(rhs.compare(lhs)); | |
| } | |
| StringBtreeDefaultGreater(std::greater<absl::Cord>) {} // NOLINT | |
| absl::weak_ordering operator()(const absl::Cord &lhs, | |
| const absl::Cord &rhs) const { | |
| return compare_internal::compare_result_as_ordering(rhs.Compare(lhs)); | |
| } | |
| absl::weak_ordering operator()(const absl::Cord &lhs, | |
| absl::string_view rhs) const { | |
| return compare_internal::compare_result_as_ordering(-lhs.Compare(rhs)); | |
| } | |
| absl::weak_ordering operator()(absl::string_view lhs, | |
| const absl::Cord &rhs) const { | |
| return compare_internal::compare_result_as_ordering(rhs.Compare(lhs)); | |
| } | |
| }; | |
| // See below comments for checked_compare. | |
| template <typename Compare, bool is_class = std::is_class_v<Compare>> | |
| struct checked_compare_base : Compare { | |
| using Compare::Compare; | |
| explicit checked_compare_base(Compare c) : Compare(std::move(c)) {} | |
| const Compare &comp() const { return *this; } | |
| }; | |
| template <typename Compare> | |
| struct checked_compare_base<Compare, false> { | |
| explicit checked_compare_base(Compare c) : compare(std::move(c)) {} | |
| const Compare &comp() const { return compare; } | |
| Compare compare; | |
| }; | |
| // A mechanism for opting out of checked_compare for use only in btree_test.cc. | |
| struct BtreeTestOnlyCheckedCompareOptOutBase {}; | |
| // A helper class to adapt the specified comparator for two use cases: | |
| // (1) When using common Abseil string types with common comparison functors, | |
| // convert a boolean comparison into a three-way comparison that returns an | |
| // `absl::weak_ordering`. This helper class is specialized for | |
| // less<std::string>, greater<std::string>, less<string_view>, | |
| // greater<string_view>, less<absl::Cord>, and greater<absl::Cord>. | |
| // (2) Adapt the comparator to diagnose cases of non-strict-weak-ordering (see | |
| // https://en.cppreference.com/w/cpp/named_req/Compare) in debug mode. Whenever | |
| // a comparison is made, we will make assertions to verify that the comparator | |
| // is valid. | |
| template <typename Compare, typename Key> | |
| struct key_compare_adapter { | |
| // Inherit from checked_compare_base to support function pointers and also | |
| // keep empty-base-optimization (EBO) support for classes. | |
| // Note: we can't use CompressedTuple here because that would interfere | |
| // with the EBO for `btree::rightmost_`. `btree::rightmost_` is itself a | |
| // CompressedTuple and nested `CompressedTuple`s don't support EBO. | |
| // TODO(b/214288561): use CompressedTuple instead once it supports EBO for | |
| // nested `CompressedTuple`s. | |
| struct checked_compare : checked_compare_base<Compare> { | |
| private: | |
| using Base = typename checked_compare::checked_compare_base; | |
| using Base::comp; | |
| // If possible, returns whether `t` is equivalent to itself. We can only do | |
| // this for `Key`s because we can't be sure that it's safe to call | |
| // `comp()(k, k)` otherwise. Even if SFINAE allows it, there could be a | |
| // compilation failure inside the implementation of the comparison operator. | |
| bool is_self_equivalent(const Key &k) const { | |
| // Note: this works for both boolean and three-way comparators. | |
| return comp()(k, k) == 0; | |
| } | |
| // If we can't compare `t` with itself, returns true unconditionally. | |
| template <typename T> | |
| bool is_self_equivalent(const T &) const { | |
| return true; | |
| } | |
| public: | |
| using Base::Base; | |
| checked_compare(Compare cmp) : Base(std::move(cmp)) {} // NOLINT | |
| // Allow converting to Compare for use in key_comp()/value_comp(). | |
| explicit operator Compare() const { return comp(); } | |
| template < | |
| typename T, typename U, | |
| std::enable_if_t<std::is_same_v<bool, compare_result_t<Compare, T, U>>, | |
| int> = 0> | |
| bool operator()(const T& lhs, const U& rhs) const { | |
| // NOTE: if any of these assertions fail, then the comparator does not | |
| // establish a strict-weak-ordering (see | |
| // https://en.cppreference.com/w/cpp/named_req/Compare). | |
| assert(is_self_equivalent(lhs)); | |
| assert(is_self_equivalent(rhs)); | |
| const bool lhs_comp_rhs = comp()(lhs, rhs); | |
| assert(!lhs_comp_rhs || !comp()(rhs, lhs)); | |
| return lhs_comp_rhs; | |
| } | |
| template < | |
| typename T, typename U, | |
| std::enable_if_t<std::is_convertible_v<compare_result_t<Compare, T, U>, | |
| absl::weak_ordering>, | |
| int> = 0> | |
| absl::weak_ordering operator()(const T& lhs, const U& rhs) const { | |
| // NOTE: if any of these assertions fail, then the comparator does not | |
| // establish a strict-weak-ordering (see | |
| // https://en.cppreference.com/w/cpp/named_req/Compare). | |
| assert(is_self_equivalent(lhs)); | |
| assert(is_self_equivalent(rhs)); | |
| const absl::weak_ordering lhs_comp_rhs = comp()(lhs, rhs); | |
| #ifndef NDEBUG | |
| const absl::weak_ordering rhs_comp_lhs = comp()(rhs, lhs); | |
| if (lhs_comp_rhs > 0) { | |
| assert(rhs_comp_lhs < 0 && "lhs_comp_rhs > 0 -> rhs_comp_lhs < 0"); | |
| } else if (lhs_comp_rhs == 0) { | |
| assert(rhs_comp_lhs == 0 && "lhs_comp_rhs == 0 -> rhs_comp_lhs == 0"); | |
| } else { | |
| assert(rhs_comp_lhs > 0 && "lhs_comp_rhs < 0 -> rhs_comp_lhs > 0"); | |
| } | |
| #endif | |
| return lhs_comp_rhs; | |
| } | |
| }; | |
| using type = std::conditional_t< | |
| std::is_base_of_v<BtreeTestOnlyCheckedCompareOptOutBase, Compare>, | |
| Compare, checked_compare>; | |
| }; | |
| template <> | |
| struct key_compare_adapter<std::less<std::string>, std::string> { | |
| using type = StringBtreeDefaultLess; | |
| }; | |
| template <> | |
| struct key_compare_adapter<std::greater<std::string>, std::string> { | |
| using type = StringBtreeDefaultGreater; | |
| }; | |
| template <> | |
| struct key_compare_adapter<std::less<absl::string_view>, absl::string_view> { | |
| using type = StringBtreeDefaultLess; | |
| }; | |
| template <> | |
| struct key_compare_adapter<std::greater<absl::string_view>, absl::string_view> { | |
| using type = StringBtreeDefaultGreater; | |
| }; | |
| template <> | |
| struct key_compare_adapter<std::less<absl::Cord>, absl::Cord> { | |
| using type = StringBtreeDefaultLess; | |
| }; | |
| template <> | |
| struct key_compare_adapter<std::greater<absl::Cord>, absl::Cord> { | |
| using type = StringBtreeDefaultGreater; | |
| }; | |
| // Detects an 'absl_btree_prefer_linear_node_search' member. This is | |
| // a protocol used as an opt-in or opt-out of linear search. | |
| // | |
| // For example, this would be useful for key types that wrap an integer | |
| // and define their own cheap operator<(). For example: | |
| // | |
| // class K { | |
| // public: | |
| // using absl_btree_prefer_linear_node_search = std::true_type; | |
| // ... | |
| // private: | |
| // friend bool operator<(K a, K b) { return a.k_ < b.k_; } | |
| // int k_; | |
| // }; | |
| // | |
| // btree_map<K, V> m; // Uses linear search | |
| // | |
| // If T has the preference tag, then it has a preference. | |
| // Btree will use the tag's truth value. | |
| template <typename T, typename = void> | |
| struct has_linear_node_search_preference : std::false_type {}; | |
| template <typename T, typename = void> | |
| struct prefers_linear_node_search : std::false_type {}; | |
| template <typename T> | |
| struct has_linear_node_search_preference< | |
| T, std::void_t<typename T::absl_btree_prefer_linear_node_search>> | |
| : std::true_type {}; | |
| template <typename T> | |
| struct prefers_linear_node_search< | |
| T, std::void_t<typename T::absl_btree_prefer_linear_node_search>> | |
| : T::absl_btree_prefer_linear_node_search {}; | |
| template <typename Compare, typename Key> | |
| constexpr bool compare_has_valid_result_type() { | |
| using compare_result_type = compare_result_t<Compare, Key, Key>; | |
| return std::is_same_v<compare_result_type, bool> || | |
| std::is_convertible_v<compare_result_type, absl::weak_ordering>; | |
| } | |
| template <typename original_key_compare, typename value_type> | |
| class map_value_compare { | |
| template <typename Params> | |
| friend class btree; | |
| // Note: this `protected` is part of the API of std::map::value_compare. See | |
| // https://en.cppreference.com/w/cpp/container/map/value_compare. | |
| protected: | |
| explicit map_value_compare(original_key_compare c) : comp(std::move(c)) {} | |
| original_key_compare comp; // NOLINT | |
| public: | |
| auto operator()(const value_type &lhs, const value_type &rhs) const | |
| -> decltype(comp(lhs.first, rhs.first)) { | |
| return comp(lhs.first, rhs.first); | |
| } | |
| }; | |
| template <typename Key, typename Compare, typename Alloc, int TargetNodeSize, | |
| bool IsMulti, bool IsMap, typename SlotPolicy> | |
| struct common_params : common_policy_traits<SlotPolicy> { | |
| using original_key_compare = Compare; | |
| // If Compare is a common comparator for a string-like type, then we adapt it | |
| // to use heterogeneous lookup and to be a key-compare-to comparator. | |
| // We also adapt the comparator to diagnose invalid comparators in debug mode. | |
| // We disable this when `Compare` is invalid in a way that will cause | |
| // adaptation to fail (having invalid return type) so that we can give a | |
| // better compilation failure in static_assert_validation. If we don't do | |
| // this, then there will be cascading compilation failures that are confusing | |
| // for users. | |
| using key_compare = | |
| std::conditional_t<!compare_has_valid_result_type<Compare, Key>(), | |
| Compare, | |
| typename key_compare_adapter<Compare, Key>::type>; | |
| static constexpr bool kIsKeyCompareStringAdapted = | |
| std::is_same_v<key_compare, StringBtreeDefaultLess> || | |
| std::is_same_v<key_compare, StringBtreeDefaultGreater>; | |
| static constexpr bool kIsKeyCompareTransparent = | |
| IsTransparent<original_key_compare>::value || kIsKeyCompareStringAdapted; | |
| // A type which indicates if we have a key-compare-to functor or a plain old | |
| // key-compare functor. | |
| using is_key_compare_to = btree_is_key_compare_to<key_compare, Key>; | |
| using allocator_type = Alloc; | |
| using key_type = Key; | |
| using size_type = size_t; | |
| using difference_type = ptrdiff_t; | |
| using slot_policy = SlotPolicy; | |
| using slot_type = typename slot_policy::slot_type; | |
| using value_type = typename slot_policy::value_type; | |
| using init_type = typename slot_policy::mutable_value_type; | |
| using pointer = value_type *; | |
| using const_pointer = const value_type *; | |
| using reference = value_type &; | |
| using const_reference = const value_type &; | |
| using value_compare = | |
| std::conditional_t<IsMap, | |
| map_value_compare<original_key_compare, value_type>, | |
| original_key_compare>; | |
| using is_map_container = std::bool_constant<IsMap>; | |
| // For the given lookup key type, returns whether we can have multiple | |
| // equivalent keys in the btree. If this is a multi-container, then we can. | |
| // Otherwise, we can have multiple equivalent keys only if all of the | |
| // following conditions are met: | |
| // - The comparator is transparent. | |
| // - The lookup key type is not the same as key_type. | |
| // - The comparator is not a StringBtreeDefault{Less,Greater} comparator | |
| // that we know has the same equivalence classes for all lookup types. | |
| template <typename LookupKey> | |
| constexpr static bool can_have_multiple_equivalent_keys() { | |
| return IsMulti || | |
| (IsTransparent<key_compare>::value && | |
| !std::is_same_v<LookupKey, Key> && !kIsKeyCompareStringAdapted); | |
| } | |
| enum { | |
| kTargetNodeSize = TargetNodeSize, | |
| // Upper bound for the available space for slots. This is largest for leaf | |
| // nodes, which have overhead of at least a pointer + 4 bytes (for storing | |
| // 3 field_types and an enum). | |
| kNodeSlotSpace = TargetNodeSize - /*minimum overhead=*/(sizeof(void *) + 4), | |
| }; | |
| // This is an integral type large enough to hold as many slots as will fit a | |
| // node of TargetNodeSize bytes. | |
| using node_count_type = | |
| std::conditional_t<(kNodeSlotSpace / sizeof(slot_type) > | |
| (std::numeric_limits<uint8_t>::max)()), | |
| uint16_t, uint8_t>; // NOLINT | |
| }; | |
| // An adapter class that converts a lower-bound compare into an upper-bound | |
| // compare. Note: there is no need to make a version of this adapter specialized | |
| // for key-compare-to functors because the upper-bound (the first value greater | |
| // than the input) is never an exact match. | |
| template <typename Compare> | |
| struct upper_bound_adapter { | |
| explicit upper_bound_adapter(const Compare &c) : comp(c) {} | |
| template <typename K1, typename K2> | |
| bool operator()(const K1 &a, const K2 &b) const { | |
| // Returns true when a is not greater than b. | |
| return !compare_internal::compare_result_as_less_than(comp(b, a)); | |
| } | |
| private: | |
| Compare comp; | |
| }; | |
| enum class MatchKind : uint8_t { kEq, kNe }; | |
| template <typename V, bool IsCompareTo> | |
| struct SearchResult { | |
| V value; | |
| MatchKind match; | |
| static constexpr bool HasMatch() { return true; } | |
| bool IsEq() const { return match == MatchKind::kEq; } | |
| }; | |
| // When we don't use CompareTo, `match` is not present. | |
| // This ensures that callers can't use it accidentally when it provides no | |
| // useful information. | |
| template <typename V> | |
| struct SearchResult<V, false> { | |
| SearchResult() = default; | |
| explicit SearchResult(V v) : value(v) {} | |
| SearchResult(V v, MatchKind /*match*/) : value(v) {} | |
| V value; | |
| static constexpr bool HasMatch() { return false; } | |
| static constexpr bool IsEq() { return false; } | |
| }; | |
| // A node in the btree holding. The same node type is used for both internal | |
| // and leaf nodes in the btree, though the nodes are allocated in such a way | |
| // that the children array is only valid in internal nodes. | |
| template <typename Params> | |
| class btree_node { | |
| using is_key_compare_to = typename Params::is_key_compare_to; | |
| using field_type = typename Params::node_count_type; | |
| using allocator_type = typename Params::allocator_type; | |
| using slot_type = typename Params::slot_type; | |
| using original_key_compare = typename Params::original_key_compare; | |
| public: | |
| using params_type = Params; | |
| using key_type = typename Params::key_type; | |
| using value_type = typename Params::value_type; | |
| using pointer = typename Params::pointer; | |
| using const_pointer = typename Params::const_pointer; | |
| using reference = typename Params::reference; | |
| using const_reference = typename Params::const_reference; | |
| using key_compare = typename Params::key_compare; | |
| using size_type = typename Params::size_type; | |
| using difference_type = typename Params::difference_type; | |
| // Btree decides whether to use linear node search as follows: | |
| // - If the comparator expresses a preference, use that. | |
| // - If the key expresses a preference, use that. | |
| // - If the key is arithmetic and the comparator is std::less or | |
| // std::greater, choose linear. | |
| // - Otherwise, choose binary. | |
| // TODO(ezb): Might make sense to add condition(s) based on node-size. | |
| using use_linear_search = std::integral_constant< | |
| bool, | |
| has_linear_node_search_preference<original_key_compare>::value | |
| ? prefers_linear_node_search<original_key_compare>::value | |
| : has_linear_node_search_preference<key_type>::value | |
| ? prefers_linear_node_search<key_type>::value | |
| : std::is_arithmetic_v<key_type> && | |
| (std::is_same_v<std::less<key_type>, original_key_compare> || | |
| std::is_same_v<std::greater<key_type>, original_key_compare>)>; | |
| // This class is organized by absl::container_internal::Layout as if it had | |
| // the following structure: | |
| // // A pointer to the node's parent. | |
| // btree_node *parent; | |
| // | |
| // // When ABSL_BTREE_ENABLE_GENERATIONS is defined, we also have a | |
| // // generation integer in order to check that when iterators are | |
| // // used, they haven't been invalidated already. Only the generation on | |
| // // the root is used, but we have one on each node because whether a node | |
| // // is root or not can change. | |
| // uint32_t generation; | |
| // | |
| // // The position of the node in the node's parent. | |
| // field_type position; | |
| // // The index of the first populated value in `values`. | |
| // // TODO(ezb): right now, `start` is always 0. Update insertion/merge | |
| // // logic to allow for floating storage within nodes. | |
| // field_type start; | |
| // // The index after the last populated value in `values`. Currently, this | |
| // // is the same as the count of values. | |
| // field_type finish; | |
| // // The maximum number of values the node can hold. This is an integer in | |
| // // [1, kNodeSlots] for root leaf nodes, kNodeSlots for non-root leaf | |
| // // nodes, and kInternalNodeMaxCount (as a sentinel value) for internal | |
| // // nodes (even though there are still kNodeSlots values in the node). | |
| // // TODO(ezb): make max_count use only 4 bits and record log2(capacity) | |
| // // to free extra bits for is_root, etc. | |
| // field_type max_count; | |
| // | |
| // // The array of values. The capacity is `max_count` for leaf nodes and | |
| // // kNodeSlots for internal nodes. Only the values in | |
| // // [start, finish) have been initialized and are valid. | |
| // slot_type values[max_count]; | |
| // | |
| // // The array of child pointers. The keys in children[i] are all less | |
| // // than key(i). The keys in children[i + 1] are all greater than key(i). | |
| // // There are 0 children for leaf nodes and kNodeSlots + 1 children for | |
| // // internal nodes. | |
| // btree_node *children[kNodeSlots + 1]; | |
| // | |
| // This class is only constructed by EmptyNodeType. Normally, pointers to the | |
| // layout above are allocated, cast to btree_node*, and de-allocated within | |
| // the btree implementation. | |
| ~btree_node() = default; | |
| btree_node(btree_node const &) = delete; | |
| btree_node &operator=(btree_node const &) = delete; | |
| protected: | |
| btree_node() = default; | |
| private: | |
| using layout_type = | |
| absl::container_internal::Layout<btree_node *, uint32_t, field_type, | |
| slot_type, btree_node *>; | |
| using leaf_layout_type = typename layout_type::template WithStaticSizes< | |
| /*parent*/ 1, | |
| /*generation*/ BtreeGenerationsEnabled() ? 1 : 0, | |
| /*position, start, finish, max_count*/ 4>; | |
| constexpr static size_type SizeWithNSlots(size_type n) { | |
| return leaf_layout_type(/*slots*/ n, /*children*/ 0).AllocSize(); | |
| } | |
| // A lower bound for the overhead of fields other than slots in a leaf node. | |
| constexpr static size_type MinimumOverhead() { | |
| return SizeWithNSlots(1) - sizeof(slot_type); | |
| } | |
| // Compute how many values we can fit onto a leaf node taking into account | |
| // padding. | |
| constexpr static size_type NodeTargetSlots(const size_type begin, | |
| const size_type end) { | |
| return begin == end ? begin | |
| : SizeWithNSlots((begin + end) / 2 + 1) > | |
| params_type::kTargetNodeSize | |
| ? NodeTargetSlots(begin, (begin + end) / 2) | |
| : NodeTargetSlots((begin + end) / 2 + 1, end); | |
| } | |
| constexpr static size_type kTargetNodeSize = params_type::kTargetNodeSize; | |
| constexpr static size_type kNodeTargetSlots = | |
| NodeTargetSlots(0, kTargetNodeSize); | |
| // We need a minimum of 3 slots per internal node in order to perform | |
| // splitting (1 value for the two nodes involved in the split and 1 value | |
| // propagated to the parent as the delimiter for the split). For performance | |
| // reasons, we don't allow 3 slots-per-node due to bad worst case occupancy of | |
| // 1/3 (for a node, not a b-tree). | |
| constexpr static size_type kMinNodeSlots = 4; | |
| constexpr static size_type kNodeSlots = | |
| kNodeTargetSlots >= kMinNodeSlots ? kNodeTargetSlots : kMinNodeSlots; | |
| using internal_layout_type = typename layout_type::template WithStaticSizes< | |
| /*parent*/ 1, | |
| /*generation*/ BtreeGenerationsEnabled() ? 1 : 0, | |
| /*position, start, finish, max_count*/ 4, /*slots*/ kNodeSlots, | |
| /*children*/ kNodeSlots + 1>; | |
| // The node is internal (i.e. is not a leaf node) if and only if `max_count` | |
| // has this value. | |
| constexpr static field_type kInternalNodeMaxCount = 0; | |
| // Leaves can have less than kNodeSlots values. | |
| constexpr static leaf_layout_type LeafLayout( | |
| const size_type slot_count = kNodeSlots) { | |
| return leaf_layout_type(slot_count, 0); | |
| } | |
| constexpr static auto InternalLayout() { return internal_layout_type(); } | |
| constexpr static size_type LeafSize(const size_type slot_count = kNodeSlots) { | |
| return LeafLayout(slot_count).AllocSize(); | |
| } | |
| constexpr static size_type InternalSize() { | |
| return InternalLayout().AllocSize(); | |
| } | |
| constexpr static size_type Alignment() { | |
| static_assert(LeafLayout(1).Alignment() == InternalLayout().Alignment(), | |
| "Alignment of all nodes must be equal."); | |
| return InternalLayout().Alignment(); | |
| } | |
| // N is the index of the type in the Layout definition. | |
| // ElementType<N> is the Nth type in the Layout definition. | |
| template <size_type N> | |
| inline typename layout_type::template ElementType<N> *GetField() { | |
| // We assert that we don't read from values that aren't there. | |
| assert(N < 4 || is_internal()); | |
| return InternalLayout().template Pointer<N>(reinterpret_cast<char *>(this)); | |
| } | |
| template <size_type N> | |
| inline const typename layout_type::template ElementType<N> *GetField() const { | |
| assert(N < 4 || is_internal()); | |
| return InternalLayout().template Pointer<N>( | |
| reinterpret_cast<const char *>(this)); | |
| } | |
| void set_parent(btree_node *p) { *GetField<0>() = p; } | |
| field_type &mutable_finish() { return GetField<2>()[2]; } | |
| slot_type *slot(size_type i) { return &GetField<3>()[i]; } | |
| slot_type *start_slot() { return slot(start()); } | |
| slot_type *finish_slot() { return slot(finish()); } | |
| const slot_type *slot(size_type i) const { return &GetField<3>()[i]; } | |
| void set_position(field_type v) { GetField<2>()[0] = v; } | |
| void set_start(field_type v) { GetField<2>()[1] = v; } | |
| void set_finish(field_type v) { GetField<2>()[2] = v; } | |
| // This method is only called by the node init methods. | |
| void set_max_count(field_type v) { GetField<2>()[3] = v; } | |
| public: | |
| // Whether this is a leaf node or not. This value doesn't change after the | |
| // node is created. | |
| bool is_leaf() const { return GetField<2>()[3] != kInternalNodeMaxCount; } | |
| // Whether this is an internal node or not. This value doesn't change after | |
| // the node is created. | |
| bool is_internal() const { return !is_leaf(); } | |
| // Getter for the position of this node in its parent. | |
| field_type position() const { return GetField<2>()[0]; } | |
| // Getter for the offset of the first value in the `values` array. | |
| field_type start() const { | |
| // TODO(ezb): when floating storage is implemented, return GetField<2>()[1]; | |
| assert(GetField<2>()[1] == 0); | |
| return 0; | |
| } | |
| // Getter for the offset after the last value in the `values` array. | |
| field_type finish() const { return GetField<2>()[2]; } | |
| // Getters for the number of values stored in this node. | |
| field_type count() const { | |
| assert(finish() >= start()); | |
| return finish() - start(); | |
| } | |
| field_type max_count() const { | |
| // Internal nodes have max_count==kInternalNodeMaxCount. | |
| // Leaf nodes have max_count in [1, kNodeSlots]. | |
| const field_type max_count = GetField<2>()[3]; | |
| return max_count == field_type{kInternalNodeMaxCount} | |
| ? field_type{kNodeSlots} | |
| : max_count; | |
| } | |
| // Getter for the parent of this node. | |
| // TODO(ezb): assert that the child of the returned node at position | |
| // `node_->position()` maps to the current node. | |
| btree_node *parent() const { return *GetField<0>(); } | |
| // Getter for whether the node is the root of the tree. The parent of the | |
| // root of the tree is the leftmost node in the tree which is guaranteed to | |
| // be a leaf. | |
| bool is_root() const { return parent()->is_leaf(); } | |
| void make_root() { | |
| assert(parent()->is_root()); | |
| set_generation(parent()->generation()); | |
| set_parent(parent()->parent()); | |
| } | |
| // Gets the root node's generation integer, which is the one used by the tree. | |
| uint32_t *get_root_generation() const { | |
| assert(BtreeGenerationsEnabled()); | |
| const btree_node *curr = this; | |
| for (; !curr->is_root(); curr = curr->parent()) continue; | |
| return const_cast<uint32_t *>(&curr->GetField<1>()[0]); | |
| } | |
| // Returns the generation for iterator validation. | |
| uint32_t generation() const { | |
| return BtreeGenerationsEnabled() ? *get_root_generation() : 0; | |
| } | |
| // Updates generation. Should only be called on a root node or during node | |
| // initialization. | |
| void set_generation(uint32_t generation) { | |
| if (BtreeGenerationsEnabled()) GetField<1>()[0] = generation; | |
| } | |
| // Updates the generation. We do this whenever the node is mutated. | |
| void next_generation() { | |
| if (BtreeGenerationsEnabled()) ++*get_root_generation(); | |
| } | |
| // Getters for the key/value at position i in the node. | |
| const key_type &key(size_type i) const { return params_type::key(slot(i)); } | |
| reference value(size_type i) { return params_type::element(slot(i)); } | |
| const_reference value(size_type i) const { | |
| return params_type::element(slot(i)); | |
| } | |
| // Getters/setter for the child at position i in the node. | |
| btree_node *child(field_type i) const { return GetField<4>()[i]; } | |
| btree_node *start_child() const { return child(start()); } | |
| btree_node *&mutable_child(field_type i) { return GetField<4>()[i]; } | |
| void clear_child(field_type i) { | |
| absl::container_internal::SanitizerPoisonObject(&mutable_child(i)); | |
| } | |
| void set_child_noupdate_position(field_type i, btree_node *c) { | |
| absl::container_internal::SanitizerUnpoisonObject(&mutable_child(i)); | |
| mutable_child(i) = c; | |
| } | |
| void set_child(field_type i, btree_node *c) { | |
| set_child_noupdate_position(i, c); | |
| c->set_position(i); | |
| } | |
| void init_child(field_type i, btree_node *c) { | |
| set_child(i, c); | |
| c->set_parent(this); | |
| } | |
| // Returns the position of the first value whose key is not less than k. | |
| template <typename K> | |
| SearchResult<size_type, is_key_compare_to::value> lower_bound( | |
| const K &k, const key_compare &comp) const { | |
| return use_linear_search::value ? linear_search(k, comp) | |
| : binary_search(k, comp); | |
| } | |
| // Returns the position of the first value whose key is greater than k. | |
| template <typename K> | |
| size_type upper_bound(const K &k, const key_compare &comp) const { | |
| auto upper_compare = upper_bound_adapter<key_compare>(comp); | |
| return use_linear_search::value ? linear_search(k, upper_compare).value | |
| : binary_search(k, upper_compare).value; | |
| } | |
| template <typename K, typename Compare> | |
| SearchResult<size_type, btree_is_key_compare_to<Compare, key_type>::value> | |
| linear_search(const K &k, const Compare &comp) const { | |
| return linear_search_impl(k, start(), finish(), comp, | |
| btree_is_key_compare_to<Compare, key_type>()); | |
| } | |
| template <typename K, typename Compare> | |
| SearchResult<size_type, btree_is_key_compare_to<Compare, key_type>::value> | |
| binary_search(const K &k, const Compare &comp) const { | |
| return binary_search_impl(k, start(), finish(), comp, | |
| btree_is_key_compare_to<Compare, key_type>()); | |
| } | |
| // Returns the position of the first value whose key is not less than k using | |
| // linear search performed using plain compare. | |
| template <typename K, typename Compare> | |
| SearchResult<size_type, false> linear_search_impl( | |
| const K &k, size_type s, const size_type e, const Compare &comp, | |
| std::false_type /* IsCompareTo */) const { | |
| while (s < e) { | |
| if (!comp(key(s), k)) { | |
| break; | |
| } | |
| ++s; | |
| } | |
| return SearchResult<size_type, false>{s}; | |
| } | |
| // Returns the position of the first value whose key is not less than k using | |
| // linear search performed using compare-to. | |
| template <typename K, typename Compare> | |
| SearchResult<size_type, true> linear_search_impl( | |
| const K &k, size_type s, const size_type e, const Compare &comp, | |
| std::true_type /* IsCompareTo */) const { | |
| while (s < e) { | |
| const absl::weak_ordering c = comp(key(s), k); | |
| if (c == 0) { | |
| return {s, MatchKind::kEq}; | |
| } else if (c > 0) { | |
| break; | |
| } | |
| ++s; | |
| } | |
| return {s, MatchKind::kNe}; | |
| } | |
| // Returns the position of the first value whose key is not less than k using | |
| // binary search performed using plain compare. | |
| template <typename K, typename Compare> | |
| SearchResult<size_type, false> binary_search_impl( | |
| const K &k, size_type s, size_type e, const Compare &comp, | |
| std::false_type /* IsCompareTo */) const { | |
| while (s != e) { | |
| const size_type mid = (s + e) >> 1; | |
| if (comp(key(mid), k)) { | |
| s = mid + 1; | |
| } else { | |
| e = mid; | |
| } | |
| } | |
| return SearchResult<size_type, false>{s}; | |
| } | |
| // Returns the position of the first value whose key is not less than k using | |
| // binary search performed using compare-to. | |
| template <typename K, typename CompareTo> | |
| SearchResult<size_type, true> binary_search_impl( | |
| const K &k, size_type s, size_type e, const CompareTo &comp, | |
| std::true_type /* IsCompareTo */) const { | |
| if (params_type::template can_have_multiple_equivalent_keys<K>()) { | |
| MatchKind exact_match = MatchKind::kNe; | |
| while (s != e) { | |
| const size_type mid = (s + e) >> 1; | |
| const absl::weak_ordering c = comp(key(mid), k); | |
| if (c < 0) { | |
| s = mid + 1; | |
| } else { | |
| e = mid; | |
| if (c == 0) { | |
| // Need to return the first value whose key is not less than k, | |
| // which requires continuing the binary search if there could be | |
| // multiple equivalent keys. | |
| exact_match = MatchKind::kEq; | |
| } | |
| } | |
| } | |
| return {s, exact_match}; | |
| } else { // Can't have multiple equivalent keys. | |
| while (s != e) { | |
| const size_type mid = (s + e) >> 1; | |
| const absl::weak_ordering c = comp(key(mid), k); | |
| if (c < 0) { | |
| s = mid + 1; | |
| } else if (c > 0) { | |
| e = mid; | |
| } else { | |
| return {mid, MatchKind::kEq}; | |
| } | |
| } | |
| return {s, MatchKind::kNe}; | |
| } | |
| } | |
| // Returns whether key i is ordered correctly with respect to the other keys | |
| // in the node. The motivation here is to detect comparators that violate | |
| // transitivity. Note: we only do comparisons of keys on this node rather than | |
| // the whole tree so that this is constant time. | |
| template <typename Compare> | |
| bool is_ordered_correctly(field_type i, const Compare &comp) const { | |
| if (std::is_base_of_v<BtreeTestOnlyCheckedCompareOptOutBase, Compare> || | |
| params_type::kIsKeyCompareStringAdapted) { | |
| return true; | |
| } | |
| const auto compare = [&](field_type a, field_type b) { | |
| const absl::weak_ordering cmp = | |
| compare_internal::do_three_way_comparison(comp, key(a), key(b)); | |
| return cmp < 0 ? -1 : cmp > 0 ? 1 : 0; | |
| }; | |
| int cmp = -1; | |
| constexpr bool kCanHaveEquivKeys = | |
| params_type::template can_have_multiple_equivalent_keys<key_type>(); | |
| for (field_type j = start(); j < finish(); ++j) { | |
| if (j == i) { | |
| if (cmp > 0) return false; | |
| continue; | |
| } | |
| int new_cmp = compare(j, i); | |
| if (new_cmp < cmp || (!kCanHaveEquivKeys && new_cmp == 0)) return false; | |
| cmp = new_cmp; | |
| } | |
| return true; | |
| } | |
| // Emplaces a value at position i, shifting all existing values and | |
| // children at positions >= i to the right by 1. | |
| template <typename... Args> | |
| void emplace_value(field_type i, allocator_type *alloc, Args &&...args); | |
| // Removes the values at positions [i, i + to_erase), shifting all existing | |
| // values and children after that range to the left by to_erase. Clears all | |
| // children between [i, i + to_erase). | |
| void remove_values(field_type i, field_type to_erase, allocator_type *alloc); | |
| // Rebalances a node with its right sibling. | |
| void rebalance_right_to_left(field_type to_move, btree_node *right, | |
| allocator_type *alloc); | |
| void rebalance_left_to_right(field_type to_move, btree_node *right, | |
| allocator_type *alloc); | |
| // Splits a node, moving a portion of the node's values to its right sibling. | |
| void split(int insert_position, btree_node *dest, allocator_type *alloc); | |
| // Merges a node with its right sibling, moving all of the values and the | |
| // delimiting key in the parent node onto itself, and deleting the src node. | |
| void merge(btree_node *src, allocator_type *alloc); | |
| // Node allocation/deletion routines. | |
| void init_leaf(field_type position, field_type max_count, | |
| btree_node *parent) { | |
| set_generation(0); | |
| set_parent(parent); | |
| set_position(position); | |
| set_start(0); | |
| set_finish(0); | |
| set_max_count(max_count); | |
| absl::container_internal::SanitizerPoisonMemoryRegion( | |
| start_slot(), max_count * sizeof(slot_type)); | |
| } | |
| void init_internal(field_type position, btree_node *parent) { | |
| init_leaf(position, kNodeSlots, parent); | |
| // Set `max_count` to a sentinel value to indicate that this node is | |
| // internal. | |
| set_max_count(kInternalNodeMaxCount); | |
| absl::container_internal::SanitizerPoisonMemoryRegion( | |
| &mutable_child(start()), (kNodeSlots + 1) * sizeof(btree_node *)); | |
| } | |
| static void deallocate(const size_type size, btree_node *node, | |
| allocator_type *alloc) { | |
| absl::container_internal::SanitizerUnpoisonMemoryRegion(node, size); | |
| absl::container_internal::Deallocate<Alignment()>(alloc, node, size); | |
| } | |
| // Deletes a node and all of its children. | |
| static void clear_and_delete(btree_node *node, allocator_type *alloc); | |
| private: | |
| template <typename... Args> | |
| void value_init(const field_type i, allocator_type *alloc, Args &&...args) { | |
| next_generation(); | |
| absl::container_internal::SanitizerUnpoisonObject(slot(i)); | |
| params_type::construct(alloc, slot(i), std::forward<Args>(args)...); | |
| } | |
| void value_destroy(const field_type i, allocator_type *alloc) { | |
| next_generation(); | |
| params_type::destroy(alloc, slot(i)); | |
| absl::container_internal::SanitizerPoisonObject(slot(i)); | |
| } | |
| void value_destroy_n(const field_type i, const field_type n, | |
| allocator_type *alloc) { | |
| next_generation(); | |
| for (slot_type *s = slot(i), *end = slot(i + n); s != end; ++s) { | |
| params_type::destroy(alloc, s); | |
| absl::container_internal::SanitizerPoisonObject(s); | |
| } | |
| } | |
| static void transfer(slot_type *dest, slot_type *src, allocator_type *alloc) { | |
| absl::container_internal::SanitizerUnpoisonObject(dest); | |
| params_type::transfer(alloc, dest, src); | |
| absl::container_internal::SanitizerPoisonObject(src); | |
| } | |
| // Transfers value from slot `src_i` in `src_node` to slot `dest_i` in `this`. | |
| void transfer(const size_type dest_i, const size_type src_i, | |
| btree_node *src_node, allocator_type *alloc) { | |
| next_generation(); | |
| transfer(slot(dest_i), src_node->slot(src_i), alloc); | |
| } | |
| // Transfers `n` values starting at value `src_i` in `src_node` into the | |
| // values starting at value `dest_i` in `this`. | |
| void transfer_n(const size_type n, const size_type dest_i, | |
| const size_type src_i, btree_node *src_node, | |
| allocator_type *alloc) { | |
| next_generation(); | |
| for (slot_type *src = src_node->slot(src_i), *end = src + n, | |
| *dest = slot(dest_i); | |
| src != end; ++src, ++dest) { | |
| transfer(dest, src, alloc); | |
| } | |
| } | |
| // Same as above, except that we start at the end and work our way to the | |
| // beginning. | |
| void transfer_n_backward(const size_type n, const size_type dest_i, | |
| const size_type src_i, btree_node *src_node, | |
| allocator_type *alloc) { | |
| next_generation(); | |
| for (slot_type *src = src_node->slot(src_i + n), *end = src - n, | |
| *dest = slot(dest_i + n); | |
| src != end; --src, --dest) { | |
| // If we modified the loop index calculations above to avoid the -1s here, | |
| // it would result in UB in the computation of `end` (and possibly `src` | |
| // as well, if n == 0), since slot() is effectively an array index and it | |
| // is UB to compute the address of any out-of-bounds array element except | |
| // for one-past-the-end. | |
| transfer(dest - 1, src - 1, alloc); | |
| } | |
| } | |
| template <typename P> | |
| friend class btree; | |
| template <typename N, typename R, typename P> | |
| friend class btree_iterator; | |
| friend class BtreeNodePeer; | |
| friend struct btree_access; | |
| }; | |
| template <typename Node> | |
| bool AreNodesFromSameContainer(const Node *node_a, const Node *node_b) { | |
| // If either node is null, then give up on checking whether they're from the | |
| // same container. (If exactly one is null, then we'll trigger the | |
| // default-constructed assert in Equals.) | |
| if (node_a == nullptr || node_b == nullptr) return true; | |
| while (!node_a->is_root()) node_a = node_a->parent(); | |
| while (!node_b->is_root()) node_b = node_b->parent(); | |
| return node_a == node_b; | |
| } | |
| class btree_iterator_generation_info_enabled { | |
| public: | |
| explicit btree_iterator_generation_info_enabled(uint32_t g) | |
| : generation_(g) {} | |
| // Updates the generation. For use internally right before we return an | |
| // iterator to the user. | |
| template <typename Node> | |
| void update_generation(const Node *node) { | |
| if (node != nullptr) generation_ = node->generation(); | |
| } | |
| uint32_t generation() const { return generation_; } | |
| template <typename Node> | |
| void assert_valid_generation(const Node *node) const { | |
| if (node != nullptr && node->generation() != generation_) { | |
| ABSL_INTERNAL_LOG( | |
| FATAL, | |
| "Attempting to use an invalidated iterator. The corresponding b-tree " | |
| "container has been mutated since this iterator was constructed."); | |
| } | |
| } | |
| private: | |
| // Used to check that the iterator hasn't been invalidated. | |
| uint32_t generation_; | |
| }; | |
| class btree_iterator_generation_info_disabled { | |
| public: | |
| explicit btree_iterator_generation_info_disabled(uint32_t) {} | |
| static void update_generation(const void *) {} | |
| static uint32_t generation() { return 0; } | |
| static void assert_valid_generation(const void *) {} | |
| }; | |
| #ifdef ABSL_BTREE_ENABLE_GENERATIONS | |
| using btree_iterator_generation_info = btree_iterator_generation_info_enabled; | |
| #else | |
| using btree_iterator_generation_info = btree_iterator_generation_info_disabled; | |
| #endif | |
| template <typename Node, typename Reference, typename Pointer> | |
| class btree_iterator : private btree_iterator_generation_info { | |
| using field_type = typename Node::field_type; | |
| using key_type = typename Node::key_type; | |
| using size_type = typename Node::size_type; | |
| using params_type = typename Node::params_type; | |
| using is_map_container = typename params_type::is_map_container; | |
| using node_type = Node; | |
| using normal_node = std::remove_const_t<Node>; | |
| using const_node = const Node; | |
| using normal_pointer = typename params_type::pointer; | |
| using normal_reference = typename params_type::reference; | |
| using const_pointer = typename params_type::const_pointer; | |
| using const_reference = typename params_type::const_reference; | |
| using slot_type = typename params_type::slot_type; | |
| // In sets, all iterators are const. | |
| using iterator = std::conditional_t< | |
| is_map_container::value, | |
| btree_iterator<normal_node, normal_reference, normal_pointer>, | |
| btree_iterator<normal_node, const_reference, const_pointer>>; | |
| using const_iterator = | |
| btree_iterator<const_node, const_reference, const_pointer>; | |
| public: | |
| // These aliases are public for std::iterator_traits. | |
| using difference_type = typename Node::difference_type; | |
| using value_type = typename params_type::value_type; | |
| using pointer = Pointer; | |
| using reference = Reference; | |
| using iterator_category = std::bidirectional_iterator_tag; | |
| btree_iterator() : btree_iterator(nullptr, -1) {} | |
| explicit btree_iterator(Node *n) : btree_iterator(n, n->start()) {} | |
| btree_iterator(Node *n, int p) | |
| : btree_iterator_generation_info(n != nullptr ? n->generation() | |
| : ~uint32_t{}), | |
| node_(n), | |
| position_(p) {} | |
| // NOTE: this SFINAE allows for implicit conversions from iterator to | |
| // const_iterator, but it specifically avoids hiding the copy constructor so | |
| // that the trivial one will be used when possible. | |
| template < | |
| typename N, typename R, typename P, | |
| std::enable_if_t<std::is_same_v<btree_iterator<N, R, P>, iterator> && | |
| std::is_same_v<btree_iterator, const_iterator>, | |
| int> = 0> | |
| btree_iterator(const btree_iterator<N, R, P> other) // NOLINT | |
| : btree_iterator_generation_info(other), | |
| node_(other.node_), | |
| position_(other.position_) {} | |
| bool operator==(const iterator &other) const { | |
| return Equals(other); | |
| } | |
| bool operator==(const const_iterator &other) const { | |
| return Equals(other); | |
| } | |
| bool operator!=(const iterator &other) const { | |
| return !Equals(other); | |
| } | |
| bool operator!=(const const_iterator &other) const { | |
| return !Equals(other); | |
| } | |
| // Returns n such that n calls to ++other yields *this. | |
| // Precondition: n exists. | |
| difference_type operator-(const_iterator other) const { | |
| if (node_ == other.node_) { | |
| if (node_->is_leaf()) return position_ - other.position_; | |
| if (position_ == other.position_) return 0; | |
| } | |
| return distance_slow(other); | |
| } | |
| // Advances the iterator by `n`. Values of `n` must not result in going past | |
| // the `end` iterator (for a positive `n`) or before the `begin` iterator (for | |
| // a negative `n`). | |
| btree_iterator &operator+=(difference_type n) { | |
| assert_valid_generation(node_); | |
| if (n == 0) return *this; | |
| if (n < 0) return decrement_n_slow(-n); | |
| return increment_n_slow(n); | |
| } | |
| // Moves the iterator by `n` positions backwards. Values of `n` must not | |
| // result in going before the `begin` iterator (for a positive `n`) or past | |
| // the `end` iterator (for a negative `n`). | |
| btree_iterator &operator-=(difference_type n) { | |
| assert_valid_generation(node_); | |
| if (n == 0) return *this; | |
| if (n < 0) return increment_n_slow(-n); | |
| return decrement_n_slow(n); | |
| } | |
| // Accessors for the key/value the iterator is pointing at. | |
| reference operator*() const { | |
| absl::base_internal::HardeningAssertNonNull(node_); | |
| assert_valid_generation(node_); | |
| absl::base_internal::HardeningAssertGE(position_, | |
| static_cast<int>(node_->start())); | |
| if (position_ >= node_->finish()) { | |
| // If this assertion fails, we have tried to dereference an end() | |
| // iterator. | |
| absl::base_internal::HardeningAssert(!IsEndIterator()); | |
| absl::base_internal::HardeningAssertLT(position_, | |
| static_cast<int>(node_->finish())); | |
| } | |
| return node_->value(static_cast<field_type>(position_)); | |
| } | |
| pointer operator->() const { return &operator*(); } | |
| btree_iterator &operator++() { | |
| increment(); | |
| return *this; | |
| } | |
| btree_iterator &operator--() { | |
| decrement(); | |
| return *this; | |
| } | |
| btree_iterator operator++(int) { | |
| btree_iterator tmp = *this; | |
| ++*this; | |
| return tmp; | |
| } | |
| btree_iterator operator--(int) { | |
| btree_iterator tmp = *this; | |
| --*this; | |
| return tmp; | |
| } | |
| private: | |
| friend iterator; | |
| friend const_iterator; | |
| template <typename Params> | |
| friend class btree; | |
| template <typename Tree> | |
| friend class btree_container; | |
| template <typename Tree> | |
| friend class btree_set_container; | |
| template <typename Tree> | |
| friend class btree_map_container; | |
| template <typename Tree> | |
| friend class btree_multiset_container; | |
| template <typename TreeType, typename CheckerType> | |
| friend class base_checker; | |
| friend struct btree_access; | |
| // This SFINAE allows explicit conversions from const_iterator to | |
| // iterator, but also avoids hiding the copy constructor. | |
| // NOTE: the const_cast is safe because this constructor is only called by | |
| // non-const methods and the container owns the nodes. | |
| template <typename N, typename R, typename P, | |
| std::enable_if_t< | |
| std::is_same_v<btree_iterator<N, R, P>, const_iterator> && | |
| std::is_same_v<btree_iterator, iterator>, | |
| int> = 0> | |
| explicit btree_iterator(const btree_iterator<N, R, P> other) | |
| : btree_iterator_generation_info(other.generation()), | |
| node_(const_cast<node_type*>(other.node_)), | |
| position_(other.position_) {} | |
| bool Equals(const const_iterator other) const { | |
| absl::base_internal::HardeningAssert( | |
| ((node_ == nullptr && other.node_ == nullptr) || | |
| (node_ != nullptr && other.node_ != nullptr)) && | |
| "Comparing default-constructed iterator with " | |
| "non-default-constructed iterator."); | |
| // Note: we use assert instead of ABSL_HARDENING_ASSERT here because this | |
| // changes the complexity of Equals from O(1) to O(log(N) + log(M)) where | |
| // N/M are sizes of the containers containing node_/other.node_. | |
| assert(AreNodesFromSameContainer(node_, other.node_) && | |
| "Comparing iterators from different containers."); | |
| assert_valid_generation(node_); | |
| other.assert_valid_generation(other.node_); | |
| return node_ == other.node_ && position_ == other.position_; | |
| } | |
| bool IsEndIterator() const { | |
| if (position_ != node_->finish()) return false; | |
| node_type *node = node_; | |
| while (!node->is_root()) { | |
| if (node->position() != node->parent()->finish()) return false; | |
| node = node->parent(); | |
| } | |
| return true; | |
| } | |
| // Returns n such that n calls to ++other yields *this. | |
| // Precondition: n exists && (this->node_ != other.node_ || | |
| // !this->node_->is_leaf() || this->position_ != other.position_). | |
| difference_type distance_slow(const_iterator other) const; | |
| // Increment/decrement the iterator. | |
| void increment() { | |
| assert_valid_generation(node_); | |
| if (node_->is_leaf() && ++position_ < node_->finish()) { | |
| return; | |
| } | |
| increment_slow(); | |
| } | |
| void increment_slow(); | |
| btree_iterator &increment_n_slow(difference_type n); | |
| void decrement() { | |
| assert_valid_generation(node_); | |
| if (node_->is_leaf() && --position_ >= node_->start()) { | |
| return; | |
| } | |
| decrement_slow(); | |
| } | |
| void decrement_slow(); | |
| btree_iterator &decrement_n_slow(difference_type n); | |
| const key_type &key() const { | |
| return node_->key(static_cast<size_type>(position_)); | |
| } | |
| decltype(std::declval<Node *>()->slot(0)) slot() { | |
| return node_->slot(static_cast<size_type>(position_)); | |
| } | |
| void update_generation() { | |
| btree_iterator_generation_info::update_generation(node_); | |
| } | |
| // The node in the tree the iterator is pointing at. | |
| Node *node_; | |
| // The position within the node of the tree the iterator is pointing at. | |
| // NOTE: this is an int rather than a field_type because iterators can point | |
| // to invalid positions (such as -1) in certain circumstances. | |
| int position_; | |
| }; | |
| template <typename Params> | |
| class btree { | |
| using node_type = btree_node<Params>; | |
| using is_key_compare_to = typename Params::is_key_compare_to; | |
| using field_type = typename node_type::field_type; | |
| // We use a static empty node for the root/leftmost/rightmost of empty btrees | |
| // in order to avoid branching in begin()/end(). | |
| struct EmptyNodeType : node_type { | |
| using field_type = typename node_type::field_type; | |
| node_type *parent; | |
| #ifdef ABSL_BTREE_ENABLE_GENERATIONS | |
| uint32_t generation = 0; | |
| #endif | |
| field_type position = 0; | |
| field_type start = 0; | |
| field_type finish = 0; | |
| // max_count must be != kInternalNodeMaxCount (so that this node is regarded | |
| // as a leaf node). max_count() is never called when the tree is empty. | |
| field_type max_count = node_type::kInternalNodeMaxCount + 1; | |
| constexpr EmptyNodeType() : parent(this) {} | |
| }; | |
| static node_type *EmptyNode() { | |
| alignas(node_type::Alignment()) static constexpr EmptyNodeType empty_node; | |
| return const_cast<EmptyNodeType *>(&empty_node); | |
| } | |
| enum : uint32_t { | |
| kNodeSlots = node_type::kNodeSlots, | |
| kMinNodeValues = kNodeSlots / 2, | |
| }; | |
| struct node_stats { | |
| using size_type = typename Params::size_type; | |
| node_stats(size_type l, size_type i) : leaf_nodes(l), internal_nodes(i) {} | |
| node_stats &operator+=(const node_stats &other) { | |
| leaf_nodes += other.leaf_nodes; | |
| internal_nodes += other.internal_nodes; | |
| return *this; | |
| } | |
| size_type leaf_nodes; | |
| size_type internal_nodes; | |
| }; | |
| public: | |
| using key_type = typename Params::key_type; | |
| using value_type = typename Params::value_type; | |
| using size_type = typename Params::size_type; | |
| using difference_type = typename Params::difference_type; | |
| using key_compare = typename Params::key_compare; | |
| using original_key_compare = typename Params::original_key_compare; | |
| using value_compare = typename Params::value_compare; | |
| using allocator_type = typename Params::allocator_type; | |
| using reference = typename Params::reference; | |
| using const_reference = typename Params::const_reference; | |
| using pointer = typename Params::pointer; | |
| using const_pointer = typename Params::const_pointer; | |
| using iterator = | |
| typename btree_iterator<node_type, reference, pointer>::iterator; | |
| using const_iterator = typename iterator::const_iterator; | |
| using reverse_iterator = std::reverse_iterator<iterator>; | |
| using const_reverse_iterator = std::reverse_iterator<const_iterator>; | |
| using node_handle_type = node_handle<Params, Params, allocator_type>; | |
| // Internal types made public for use by btree_container types. | |
| using params_type = Params; | |
| using slot_type = typename Params::slot_type; | |
| private: | |
| // Copies or moves (depending on the template parameter) the values in | |
| // other into this btree in their order in other. This btree must be empty | |
| // before this method is called. This method is used in copy construction, | |
| // copy assignment, and move assignment. | |
| template <typename Btree> | |
| void copy_or_move_values_in_order(Btree &other); | |
| // Validates that various assumptions/requirements are true at compile time. | |
| constexpr static bool static_assert_validation(); | |
| public: | |
| btree(const key_compare &comp, const allocator_type &alloc) | |
| : root_(EmptyNode()), rightmost_(comp, alloc, EmptyNode()), size_(0) {} | |
| btree(const btree &other) : btree(other, other.allocator()) {} | |
| btree(const btree &other, const allocator_type &alloc) | |
| : btree(other.key_comp(), alloc) { | |
| copy_or_move_values_in_order(other); | |
| } | |
| btree(btree &&other) noexcept | |
| : root_(std::exchange(other.root_, EmptyNode())), | |
| rightmost_(std::move(other.rightmost_)), | |
| size_(std::exchange(other.size_, 0u)) { | |
| other.mutable_rightmost() = EmptyNode(); | |
| } | |
| btree(btree &&other, const allocator_type &alloc) | |
| : btree(other.key_comp(), alloc) { | |
| if (alloc == other.allocator()) { | |
| swap(other); | |
| } else { | |
| // Move values from `other` one at a time when allocators are different. | |
| copy_or_move_values_in_order(other); | |
| } | |
| } | |
| ~btree() { | |
| // Put static_asserts in destructor to avoid triggering them before the type | |
| // is complete. | |
| static_assert(static_assert_validation(), "This call must be elided."); | |
| clear(); | |
| } | |
| // Assign the contents of other to *this. | |
| btree &operator=(const btree &other); | |
| btree &operator=(btree &&other) noexcept; | |
| iterator begin() { return iterator(leftmost()); } | |
| const_iterator begin() const { return const_iterator(leftmost()); } | |
| iterator end() { return iterator(rightmost(), rightmost()->finish()); } | |
| const_iterator end() const { | |
| return const_iterator(rightmost(), rightmost()->finish()); | |
| } | |
| reverse_iterator rbegin() { return reverse_iterator(end()); } | |
| const_reverse_iterator rbegin() const { | |
| return const_reverse_iterator(end()); | |
| } | |
| reverse_iterator rend() { return reverse_iterator(begin()); } | |
| const_reverse_iterator rend() const { | |
| return const_reverse_iterator(begin()); | |
| } | |
| // Finds the first element whose key is not less than `key`. | |
| template <typename K> | |
| iterator lower_bound(const K &key) { | |
| return internal_end(internal_lower_bound(key).value); | |
| } | |
| template <typename K> | |
| const_iterator lower_bound(const K &key) const { | |
| return internal_end(internal_lower_bound(key).value); | |
| } | |
| // Finds the first element whose key is not less than `key` and also returns | |
| // whether that element is equal to `key`. | |
| template <typename K> | |
| std::pair<iterator, bool> lower_bound_equal(const K &key) const; | |
| // Finds the first element whose key is greater than `key`. | |
| template <typename K> | |
| iterator upper_bound(const K &key) { | |
| return internal_end(internal_upper_bound(key)); | |
| } | |
| template <typename K> | |
| const_iterator upper_bound(const K &key) const { | |
| return internal_end(internal_upper_bound(key)); | |
| } | |
| // Finds the range of values which compare equal to key. The first member of | |
| // the returned pair is equal to lower_bound(key). The second member of the | |
| // pair is equal to upper_bound(key). | |
| template <typename K> | |
| std::pair<iterator, iterator> equal_range(const K &key); | |
| template <typename K> | |
| std::pair<const_iterator, const_iterator> equal_range(const K &key) const { | |
| return const_cast<btree *>(this)->equal_range(key); | |
| } | |
| // Inserts a value into the btree only if it does not already exist. The | |
| // boolean return value indicates whether insertion succeeded or failed. | |
| // Requirement: if `key` already exists in the btree, does not consume `args`. | |
| // Requirement: `key` is never referenced after consuming `args`. | |
| template <typename K, typename... Args> | |
| std::pair<iterator, bool> insert_unique(const K &key, Args &&...args); | |
| // Inserts with hint. Checks to see if the value should be placed immediately | |
| // before `position` in the tree. If so, then the insertion will take | |
| // amortized constant time. If not, the insertion will take amortized | |
| // logarithmic time as if a call to insert_unique() were made. | |
| // Requirement: if `key` already exists in the btree, does not consume `args`. | |
| // Requirement: `key` is never referenced after consuming `args`. | |
| template <typename K, typename... Args> | |
| std::pair<iterator, bool> insert_hint_unique(iterator position, const K &key, | |
| Args &&...args); | |
| // Insert a range of values into the btree. | |
| // Note: the first overload avoids constructing a value_type if the key | |
| // already exists in the btree. | |
| template <typename InputIterator, | |
| typename = decltype(std::declval<const key_compare &>()( | |
| params_type::key(*std::declval<InputIterator>()), | |
| std::declval<const key_type &>()))> | |
| void insert_iterator_unique(InputIterator b, InputIterator e, int); | |
| // We need the second overload for cases in which we need to construct a | |
| // value_type in order to compare it with the keys already in the btree. | |
| template <typename InputIterator> | |
| void insert_iterator_unique(InputIterator b, InputIterator e, char); | |
| // Inserts a value into the btree. | |
| template <typename ValueType> | |
| iterator insert_multi(const key_type &key, ValueType &&v); | |
| // Inserts a value into the btree. | |
| template <typename ValueType> | |
| iterator insert_multi(ValueType &&v) { | |
| return insert_multi(params_type::key(v), std::forward<ValueType>(v)); | |
| } | |
| // Insert with hint. Check to see if the value should be placed immediately | |
| // before position in the tree. If it does, then the insertion will take | |
| // amortized constant time. If not, the insertion will take amortized | |
| // logarithmic time as if a call to insert_multi(v) were made. | |
| template <typename ValueType> | |
| iterator insert_hint_multi(iterator position, ValueType &&v); | |
| // Insert a range of values into the btree. | |
| template <typename InputIterator> | |
| void insert_iterator_multi(InputIterator b, | |
| InputIterator e); | |
| // Erase the specified iterator from the btree. The iterator must be valid | |
| // (i.e. not equal to end()). Return an iterator pointing to the node after | |
| // the one that was erased (or end() if none exists). | |
| // Requirement: does not read the value at `*iter`. | |
| iterator erase(iterator iter); | |
| // Erases range. Returns the number of keys erased and an iterator pointing | |
| // to the element after the last erased element. | |
| std::pair<size_type, iterator> erase_range(iterator begin, iterator end); | |
| // Finds an element with key equivalent to `key` or returns `end()` if `key` | |
| // is not present. | |
| template <typename K> | |
| iterator find(const K &key) { | |
| return internal_end(internal_find(key)); | |
| } | |
| template <typename K> | |
| const_iterator find(const K &key) const { | |
| return internal_end(internal_find(key)); | |
| } | |
| // Clear the btree, deleting all of the values it contains. | |
| void clear(); | |
| // Swaps the contents of `this` and `other`. | |
| void swap(btree &other); | |
| const key_compare &key_comp() const noexcept { | |
| return rightmost_.template get<0>(); | |
| } | |
| template <typename K1, typename K2> | |
| bool compare_keys(const K1 &a, const K2 &b) const { | |
| return compare_internal::compare_result_as_less_than(key_comp()(a, b)); | |
| } | |
| value_compare value_comp() const { | |
| return value_compare(original_key_compare(key_comp())); | |
| } | |
| // Verifies the structure of the btree. | |
| void verify() const; | |
| // Size routines. | |
| size_type size() const { return size_; } | |
| size_type max_size() const { return (std::numeric_limits<size_type>::max)(); } | |
| bool empty() const { return size_ == 0; } | |
| // The height of the btree. An empty tree will have height 0. | |
| size_type height() const { | |
| size_type h = 0; | |
| if (!empty()) { | |
| // Count the length of the chain from the leftmost node up to the | |
| // root. We actually count from the root back around to the level below | |
| // the root, but the calculation is the same because of the circularity | |
| // of that traversal. | |
| const node_type *n = root(); | |
| do { | |
| ++h; | |
| n = n->parent(); | |
| } while (n != root()); | |
| } | |
| return h; | |
| } | |
| // The number of internal, leaf and total nodes used by the btree. | |
| size_type leaf_nodes() const { return internal_stats(root()).leaf_nodes; } | |
| size_type internal_nodes() const { | |
| return internal_stats(root()).internal_nodes; | |
| } | |
| size_type nodes() const { | |
| node_stats stats = internal_stats(root()); | |
| return stats.leaf_nodes + stats.internal_nodes; | |
| } | |
| // The total number of bytes used by the btree. | |
| // TODO(b/169338300): update to support node_btree_*. | |
| size_type bytes_used() const { | |
| node_stats stats = internal_stats(root()); | |
| if (stats.leaf_nodes == 1 && stats.internal_nodes == 0) { | |
| return sizeof(*this) + node_type::LeafSize(root()->max_count()); | |
| } else { | |
| return sizeof(*this) + stats.leaf_nodes * node_type::LeafSize() + | |
| stats.internal_nodes * node_type::InternalSize(); | |
| } | |
| } | |
| // The average number of bytes used per value stored in the btree assuming | |
| // random insertion order. | |
| static double average_bytes_per_value() { | |
| // The expected number of values per node with random insertion order is the | |
| // average of the maximum and minimum numbers of values per node. | |
| const double expected_values_per_node = (kNodeSlots + kMinNodeValues) / 2.0; | |
| return node_type::LeafSize() / expected_values_per_node; | |
| } | |
| // The fullness of the btree. Computed as the number of elements in the btree | |
| // divided by the maximum number of elements a tree with the current number | |
| // of nodes could hold. A value of 1 indicates perfect space | |
| // utilization. Smaller values indicate space wastage. | |
| // Returns 0 for empty trees. | |
| double fullness() const { | |
| if (empty()) return 0.0; | |
| return static_cast<double>(size()) / (nodes() * kNodeSlots); | |
| } | |
| // The overhead of the btree structure in bytes per node. Computed as the | |
| // total number of bytes used by the btree minus the number of bytes used for | |
| // storing elements divided by the number of elements. | |
| // Returns 0 for empty trees. | |
| double overhead() const { | |
| if (empty()) return 0.0; | |
| return (bytes_used() - size() * sizeof(value_type)) / | |
| static_cast<double>(size()); | |
| } | |
| // The allocator used by the btree. | |
| allocator_type get_allocator() const { return allocator(); } | |
| private: | |
| friend struct btree_access; | |
| // Internal accessor routines. | |
| node_type *root() { return root_; } | |
| const node_type *root() const { return root_; } | |
| node_type *&mutable_root() noexcept { return root_; } | |
| node_type *rightmost() { return rightmost_.template get<2>(); } | |
| const node_type *rightmost() const { return rightmost_.template get<2>(); } | |
| node_type *&mutable_rightmost() noexcept { | |
| return rightmost_.template get<2>(); | |
| } | |
| key_compare *mutable_key_comp() noexcept { | |
| return &rightmost_.template get<0>(); | |
| } | |
| // The leftmost node is stored as the parent of the root node. | |
| node_type *leftmost() { return root()->parent(); } | |
| const node_type *leftmost() const { return root()->parent(); } | |
| // Allocator routines. | |
| allocator_type *mutable_allocator() noexcept { | |
| return &rightmost_.template get<1>(); | |
| } | |
| const allocator_type &allocator() const noexcept { | |
| return rightmost_.template get<1>(); | |
| } | |
| // Allocates a correctly aligned node of at least size bytes using the | |
| // allocator. | |
| node_type *allocate(size_type size) { | |
| return reinterpret_cast<node_type *>( | |
| absl::container_internal::Allocate<node_type::Alignment()>( | |
| mutable_allocator(), size)); | |
| } | |
| // Node creation/deletion routines. | |
| node_type *new_internal_node(field_type position, node_type *parent) { | |
| node_type *n = allocate(node_type::InternalSize()); | |
| n->init_internal(position, parent); | |
| return n; | |
| } | |
| node_type *new_leaf_node(field_type position, node_type *parent) { | |
| node_type *n = allocate(node_type::LeafSize()); | |
| n->init_leaf(position, kNodeSlots, parent); | |
| return n; | |
| } | |
| node_type *new_leaf_root_node(field_type max_count) { | |
| node_type *n = allocate(node_type::LeafSize(max_count)); | |
| n->init_leaf(/*position=*/0, max_count, /*parent=*/n); | |
| return n; | |
| } | |
| // Deletion helper routines. | |
| iterator rebalance_after_delete(iterator iter); | |
| // Rebalances or splits the node iter points to. | |
| void rebalance_or_split(iterator *iter); | |
| // Merges the values of left, right and the delimiting key on their parent | |
| // onto left, removing the delimiting key and deleting right. | |
| void merge_nodes(node_type *left, node_type *right); | |
| // Tries to merge node with its left or right sibling, and failing that, | |
| // rebalance with its left or right sibling. Returns true if a merge | |
| // occurred, at which point it is no longer valid to access node. Returns | |
| // false if no merging took place. | |
| bool try_merge_or_rebalance(iterator *iter); | |
| // Tries to shrink the height of the tree by 1. | |
| void try_shrink(); | |
| iterator internal_end(iterator iter) { | |
| return iter.node_ != nullptr ? iter : end(); | |
| } | |
| const_iterator internal_end(const_iterator iter) const { | |
| return iter.node_ != nullptr ? iter : end(); | |
| } | |
| // Emplaces a value into the btree immediately before iter. Requires that | |
| // key(v) <= iter.key() and (--iter).key() <= key(v). | |
| template <typename... Args> | |
| iterator internal_emplace(iterator iter, Args &&...args); | |
| // Returns an iterator pointing to the first value >= the value "iter" is | |
| // pointing at. Note that "iter" might be pointing to an invalid location such | |
| // as iter.position_ == iter.node_->finish(). This routine simply moves iter | |
| // up in the tree to a valid location. Requires: iter.node_ is non-null. | |
| template <typename IterType> | |
| static IterType internal_last(IterType iter); | |
| // Returns an iterator pointing to the leaf position at which key would | |
| // reside in the tree, unless there is an exact match - in which case, the | |
| // result may not be on a leaf. When there's a three-way comparator, we can | |
| // return whether there was an exact match. This allows the caller to avoid a | |
| // subsequent comparison to determine if an exact match was made, which is | |
| // important for keys with expensive comparison, such as strings. | |
| template <typename K> | |
| SearchResult<iterator, is_key_compare_to::value> internal_locate( | |
| const K &key) const; | |
| // Internal routine which implements lower_bound(). | |
| template <typename K> | |
| SearchResult<iterator, is_key_compare_to::value> internal_lower_bound( | |
| const K &key) const; | |
| // Internal routine which implements upper_bound(). | |
| template <typename K> | |
| iterator internal_upper_bound(const K &key) const; | |
| // Internal routine which implements find(). | |
| template <typename K> | |
| iterator internal_find(const K &key) const; | |
| // Verifies the tree structure of node. | |
| size_type internal_verify(const node_type *node, const key_type *lo, | |
| const key_type *hi) const; | |
| node_stats internal_stats(const node_type *node) const { | |
| // The root can be a static empty node. | |
| if (node == nullptr || (node == root() && empty())) { | |
| return node_stats(0, 0); | |
| } | |
| if (node->is_leaf()) { | |
| return node_stats(1, 0); | |
| } | |
| node_stats res(0, 1); | |
| for (int i = node->start(); i <= node->finish(); ++i) { | |
| res += internal_stats(node->child(i)); | |
| } | |
| return res; | |
| } | |
| node_type *root_; | |
| // A pointer to the rightmost node. Note that the leftmost node is stored as | |
| // the root's parent. We use compressed tuple in order to save space because | |
| // key_compare and allocator_type are usually empty. | |
| absl::container_internal::CompressedTuple<key_compare, allocator_type, | |
| node_type *> | |
| rightmost_; | |
| // Number of values. | |
| size_type size_; | |
| }; | |
| //// | |
| // btree_node methods | |
| template <typename P> | |
| template <typename... Args> | |
| inline void btree_node<P>::emplace_value(const field_type i, | |
| allocator_type *alloc, | |
| Args &&...args) { | |
| assert(i >= start()); | |
| assert(i <= finish()); | |
| // Shift old values to create space for new value and then construct it in | |
| // place. | |
| if (i < finish()) { | |
| transfer_n_backward(finish() - i, /*dest_i=*/i + 1, /*src_i=*/i, this, | |
| alloc); | |
| } | |
| value_init(static_cast<field_type>(i), alloc, std::forward<Args>(args)...); | |
| set_finish(finish() + 1); | |
| if (is_internal() && finish() > i + 1) { | |
| for (field_type j = finish(); j > i + 1; --j) { | |
| set_child(j, child(j - 1)); | |
| } | |
| clear_child(i + 1); | |
| } | |
| } | |
| template <typename P> | |
| inline void btree_node<P>::remove_values(const field_type i, | |
| const field_type to_erase, | |
| allocator_type *alloc) { | |
| // Transfer values after the removed range into their new places. | |
| value_destroy_n(i, to_erase, alloc); | |
| const field_type orig_finish = finish(); | |
| const field_type src_i = i + to_erase; | |
| transfer_n(orig_finish - src_i, i, src_i, this, alloc); | |
| if (is_internal()) { | |
| // Delete all children between begin and end. | |
| for (field_type j = 0; j < to_erase; ++j) { | |
| clear_and_delete(child(i + j + 1), alloc); | |
| } | |
| // Rotate children after end into new positions. | |
| for (field_type j = i + to_erase + 1; j <= orig_finish; ++j) { | |
| set_child(j - to_erase, child(j)); | |
| clear_child(j); | |
| } | |
| } | |
| set_finish(orig_finish - to_erase); | |
| } | |
| template <typename P> | |
| void btree_node<P>::rebalance_right_to_left(field_type to_move, | |
| btree_node *right, | |
| allocator_type *alloc) { | |
| assert(parent() == right->parent()); | |
| assert(position() + 1 == right->position()); | |
| assert(right->count() >= count()); | |
| assert(to_move >= 1); | |
| assert(to_move <= right->count()); | |
| // 1) Move the delimiting value in the parent to the left node. | |
| transfer(finish(), position(), parent(), alloc); | |
| // 2) Move the (to_move - 1) values from the right node to the left node. | |
| transfer_n(to_move - 1, finish() + 1, right->start(), right, alloc); | |
| // 3) Move the new delimiting value to the parent from the right node. | |
| parent()->transfer(position(), right->start() + to_move - 1, right, alloc); | |
| // 4) Shift the values in the right node to their correct positions. | |
| right->transfer_n(right->count() - to_move, right->start(), | |
| right->start() + to_move, right, alloc); | |
| if (is_internal()) { | |
| // Move the child pointers from the right to the left node. | |
| for (field_type i = 0; i < to_move; ++i) { | |
| init_child(finish() + i + 1, right->child(i)); | |
| } | |
| for (field_type i = right->start(); i <= right->finish() - to_move; ++i) { | |
| assert(i + to_move <= right->max_count()); | |
| right->init_child(i, right->child(i + to_move)); | |
| right->clear_child(i + to_move); | |
| } | |
| } | |
| // Fixup `finish` on the left and right nodes. | |
| set_finish(finish() + to_move); | |
| right->set_finish(right->finish() - to_move); | |
| } | |
| template <typename P> | |
| void btree_node<P>::rebalance_left_to_right(field_type to_move, | |
| btree_node *right, | |
| allocator_type *alloc) { | |
| assert(parent() == right->parent()); | |
| assert(position() + 1 == right->position()); | |
| assert(count() >= right->count()); | |
| assert(to_move >= 1); | |
| assert(to_move <= count()); | |
| // Values in the right node are shifted to the right to make room for the | |
| // new to_move values. Then, the delimiting value in the parent and the | |
| // other (to_move - 1) values in the left node are moved into the right node. | |
| // Lastly, a new delimiting value is moved from the left node into the | |
| // parent, and the remaining empty left node entries are destroyed. | |
| // 1) Shift existing values in the right node to their correct positions. | |
| right->transfer_n_backward(right->count(), right->start() + to_move, | |
| right->start(), right, alloc); | |
| // 2) Move the delimiting value in the parent to the right node. | |
| right->transfer(right->start() + to_move - 1, position(), parent(), alloc); | |
| // 3) Move the (to_move - 1) values from the left node to the right node. | |
| right->transfer_n(to_move - 1, right->start(), finish() - (to_move - 1), this, | |
| alloc); | |
| // 4) Move the new delimiting value to the parent from the left node. | |
| parent()->transfer(position(), finish() - to_move, this, alloc); | |
| if (is_internal()) { | |
| // Move the child pointers from the left to the right node. | |
| for (field_type i = right->finish() + 1; i > right->start(); --i) { | |
| right->init_child(i - 1 + to_move, right->child(i - 1)); | |
| right->clear_child(i - 1); | |
| } | |
| for (field_type i = 1; i <= to_move; ++i) { | |
| right->init_child(i - 1, child(finish() - to_move + i)); | |
| clear_child(finish() - to_move + i); | |
| } | |
| } | |
| // Fixup the counts on the left and right nodes. | |
| set_finish(finish() - to_move); | |
| right->set_finish(right->finish() + to_move); | |
| } | |
| template <typename P> | |
| void btree_node<P>::split(const int insert_position, btree_node *dest, | |
| allocator_type *alloc) { | |
| assert(dest->count() == 0); | |
| assert(max_count() == kNodeSlots); | |
| assert(position() + 1 == dest->position()); | |
| assert(parent() == dest->parent()); | |
| // We bias the split based on the position being inserted. If we're | |
| // inserting at the beginning of the left node then bias the split to put | |
| // more values on the right node. If we're inserting at the end of the | |
| // right node then bias the split to put more values on the left node. | |
| if (insert_position == start()) { | |
| dest->set_finish(dest->start() + finish() - 1); | |
| } else if (insert_position == kNodeSlots) { | |
| dest->set_finish(dest->start()); | |
| } else { | |
| dest->set_finish(dest->start() + count() / 2); | |
| } | |
| set_finish(finish() - dest->count()); | |
| assert(count() >= 1); | |
| // Move values from the left sibling to the right sibling. | |
| dest->transfer_n(dest->count(), dest->start(), finish(), this, alloc); | |
| // The split key is the largest value in the left sibling. | |
| --mutable_finish(); | |
| parent()->emplace_value(position(), alloc, finish_slot()); | |
| value_destroy(finish(), alloc); | |
| parent()->set_child_noupdate_position(position() + 1, dest); | |
| if (is_internal()) { | |
| for (field_type i = dest->start(), j = finish() + 1; i <= dest->finish(); | |
| ++i, ++j) { | |
| assert(child(j) != nullptr); | |
| dest->init_child(i, child(j)); | |
| clear_child(j); | |
| } | |
| } | |
| } | |
| template <typename P> | |
| void btree_node<P>::merge(btree_node *src, allocator_type *alloc) { | |
| assert(parent() == src->parent()); | |
| assert(position() + 1 == src->position()); | |
| // Move the delimiting value to the left node. | |
| value_init(finish(), alloc, parent()->slot(position())); | |
| // Move the values from the right to the left node. | |
| transfer_n(src->count(), finish() + 1, src->start(), src, alloc); | |
| if (is_internal()) { | |
| // Move the child pointers from the right to the left node. | |
| for (field_type i = src->start(), j = finish() + 1; i <= src->finish(); | |
| ++i, ++j) { | |
| init_child(j, src->child(i)); | |
| src->clear_child(i); | |
| } | |
| } | |
| // Fixup `finish` on the src and dest nodes. | |
| set_finish(start() + 1 + count() + src->count()); | |
| src->set_finish(src->start()); | |
| // Remove the value on the parent node and delete the src node. | |
| parent()->remove_values(position(), /*to_erase=*/1, alloc); | |
| } | |
| template <typename P> | |
| void btree_node<P>::clear_and_delete(btree_node *node, allocator_type *alloc) { | |
| if (node->is_leaf()) { | |
| node->value_destroy_n(node->start(), node->count(), alloc); | |
| deallocate(LeafSize(node->max_count()), node, alloc); | |
| return; | |
| } | |
| if (node->count() == 0) { | |
| deallocate(InternalSize(), node, alloc); | |
| return; | |
| } | |
| // The parent of the root of the subtree we are deleting. | |
| btree_node *delete_root_parent = node->parent(); | |
| // Navigate to the leftmost leaf under node, and then delete upwards. | |
| while (node->is_internal()) node = node->start_child(); | |
| #ifdef ABSL_BTREE_ENABLE_GENERATIONS | |
| // When generations are enabled, we delete the leftmost leaf last in case it's | |
| // the parent of the root and we need to check whether it's a leaf before we | |
| // can update the root's generation. | |
| // TODO(ezb): if we change btree_node::is_root to check a bool inside the node | |
| // instead of checking whether the parent is a leaf, we can remove this logic. | |
| btree_node *leftmost_leaf = node; | |
| #endif | |
| // Use `size_type` because `pos` needs to be able to hold `kNodeSlots+1`, | |
| // which isn't guaranteed to be a valid `field_type`. | |
| size_type pos = node->position(); | |
| btree_node *parent = node->parent(); | |
| for (;;) { | |
| // In each iteration of the next loop, we delete one leaf node and go right. | |
| assert(pos <= parent->finish()); | |
| do { | |
| node = parent->child(static_cast<field_type>(pos)); | |
| if (node->is_internal()) { | |
| // Navigate to the leftmost leaf under node. | |
| while (node->is_internal()) node = node->start_child(); | |
| pos = node->position(); | |
| parent = node->parent(); | |
| } | |
| node->value_destroy_n(node->start(), node->count(), alloc); | |
| #ifdef ABSL_BTREE_ENABLE_GENERATIONS | |
| if (leftmost_leaf != node) | |
| #endif | |
| deallocate(LeafSize(node->max_count()), node, alloc); | |
| ++pos; | |
| } while (pos <= parent->finish()); | |
| // Once we've deleted all children of parent, delete parent and go up/right. | |
| assert(pos > parent->finish()); | |
| do { | |
| node = parent; | |
| pos = node->position(); | |
| parent = node->parent(); | |
| node->value_destroy_n(node->start(), node->count(), alloc); | |
| deallocate(InternalSize(), node, alloc); | |
| if (parent == delete_root_parent) { | |
| #ifdef ABSL_BTREE_ENABLE_GENERATIONS | |
| deallocate(LeafSize(leftmost_leaf->max_count()), leftmost_leaf, alloc); | |
| #endif | |
| return; | |
| } | |
| ++pos; | |
| } while (pos > parent->finish()); | |
| } | |
| } | |
| //// | |
| // btree_iterator methods | |
| // Note: the implementation here is based on btree_node::clear_and_delete. | |
| template <typename N, typename R, typename P> | |
| auto btree_iterator<N, R, P>::distance_slow(const_iterator other) const | |
| -> difference_type { | |
| const_iterator begin = other; | |
| const_iterator end = *this; | |
| assert(begin.node_ != end.node_ || !begin.node_->is_leaf() || | |
| begin.position_ != end.position_); | |
| const node_type *node = begin.node_; | |
| // We need to compensate for double counting if begin.node_ is a leaf node. | |
| difference_type count = node->is_leaf() ? -begin.position_ : 0; | |
| // First navigate to the leftmost leaf node past begin. | |
| if (node->is_internal()) { | |
| ++count; | |
| node = node->child(begin.position_ + 1); | |
| } | |
| while (node->is_internal()) node = node->start_child(); | |
| // Use `size_type` because `pos` needs to be able to hold `kNodeSlots+1`, | |
| // which isn't guaranteed to be a valid `field_type`. | |
| size_type pos = node->position(); | |
| const node_type *parent = node->parent(); | |
| for (;;) { | |
| // In each iteration of the next loop, we count one leaf node and go right. | |
| assert(pos <= parent->finish()); | |
| do { | |
| node = parent->child(static_cast<field_type>(pos)); | |
| if (node->is_internal()) { | |
| // Navigate to the leftmost leaf under node. | |
| while (node->is_internal()) node = node->start_child(); | |
| pos = node->position(); | |
| parent = node->parent(); | |
| } | |
| if (node == end.node_) return count + end.position_; | |
| if (parent == end.node_ && pos == static_cast<size_type>(end.position_)) | |
| return count + node->count(); | |
| // +1 is for the next internal node value. | |
| count += node->count() + 1; | |
| ++pos; | |
| } while (pos <= parent->finish()); | |
| // Once we've counted all children of parent, go up/right. | |
| assert(pos > parent->finish()); | |
| do { | |
| node = parent; | |
| pos = node->position(); | |
| parent = node->parent(); | |
| // -1 because we counted the value at end and shouldn't. | |
| if (parent == end.node_ && pos == static_cast<size_type>(end.position_)) | |
| return count - 1; | |
| ++pos; | |
| } while (pos > parent->finish()); | |
| } | |
| } | |
| template <typename N, typename R, typename P> | |
| void btree_iterator<N, R, P>::increment_slow() { | |
| N* node = node_; | |
| int position = position_; | |
| if (node->is_leaf()) { | |
| assert(position >= node->finish()); | |
| while (position == node->finish() && !node->is_root()) { | |
| assert(node->parent()->child(node->position()) == node); | |
| position = node->position(); | |
| node = node->parent(); | |
| } | |
| // TODO(ezb): assert we aren't incrementing end() instead of handling. | |
| if (position == node->finish()) { | |
| return; | |
| } | |
| } else { | |
| assert(position < node->finish()); | |
| node = node->child(static_cast<field_type>(position + 1)); | |
| while (node->is_internal()) { | |
| node = node->start_child(); | |
| } | |
| position = node->start(); | |
| } | |
| *this = {node, position}; | |
| } | |
| template <typename N, typename R, typename P> | |
| void btree_iterator<N, R, P>::decrement_slow() { | |
| N* node = node_; | |
| int position = position_; | |
| if (node->is_leaf()) { | |
| assert(position <= -1); | |
| while (position < node->start() && !node->is_root()) { | |
| assert(node->parent()->child(node->position()) == node); | |
| position = node->position() - 1; | |
| node = node->parent(); | |
| } | |
| // TODO(ezb): assert we aren't decrementing begin() instead of handling. | |
| if (position < node->start()) { | |
| return; | |
| } | |
| } else { | |
| assert(position >= node->start()); | |
| node = node->child(static_cast<field_type>(position)); | |
| while (node->is_internal()) { | |
| node = node->child(node->finish()); | |
| } | |
| position = node->finish() - 1; | |
| } | |
| *this = {node, position}; | |
| } | |
| template <typename N, typename R, typename P> | |
| btree_iterator<N, R, P> &btree_iterator<N, R, P>::increment_n_slow( | |
| difference_type n) { | |
| N *node = node_; | |
| int position = position_; | |
| ABSL_ASSUME(n > 0); | |
| while (n > 0) { | |
| if (node->is_leaf()) { | |
| if (position + n < node->finish()) { | |
| position += n; | |
| break; | |
| } else { | |
| n -= node->finish() - position; | |
| position = node->finish(); | |
| btree_iterator save = {node, position}; | |
| while (position == node->finish() && !node->is_root()) { | |
| position = node->position(); | |
| node = node->parent(); | |
| } | |
| if (position == node->finish()) { | |
| absl::base_internal::HardeningAssert(n == 0); | |
| return *this = save; | |
| } | |
| } | |
| } else { | |
| --n; | |
| assert(position < node->finish()); | |
| node = node->child(static_cast<field_type>(position + 1)); | |
| while (node->is_internal()) { | |
| node = node->start_child(); | |
| } | |
| position = node->start(); | |
| } | |
| } | |
| node_ = node; | |
| position_ = position; | |
| return *this; | |
| } | |
| template <typename N, typename R, typename P> | |
| btree_iterator<N, R, P> &btree_iterator<N, R, P>::decrement_n_slow( | |
| difference_type n) { | |
| N *node = node_; | |
| int position = position_; | |
| ABSL_ASSUME(n > 0); | |
| while (n > 0) { | |
| if (node->is_leaf()) { | |
| if (position - n >= node->start()) { | |
| position -= n; | |
| break; | |
| } else { | |
| n -= 1 + position - node->start(); | |
| position = node->start() - 1; | |
| while (position < node->start() && !node->is_root()) { | |
| position = node->position() - 1; | |
| node = node->parent(); | |
| } | |
| absl::base_internal::HardeningAssertGE(position, | |
| static_cast<int>(node->start())); | |
| } | |
| } else { | |
| --n; | |
| assert(position >= node->start()); | |
| node = node->child(static_cast<field_type>(position)); | |
| while (node->is_internal()) { | |
| node = node->child(node->finish()); | |
| } | |
| position = node->finish() - 1; | |
| } | |
| } | |
| node_ = node; | |
| position_ = position; | |
| return *this; | |
| } | |
| //// | |
| // btree methods | |
| template <typename P> | |
| template <typename Btree> | |
| void btree<P>::copy_or_move_values_in_order(Btree &other) { | |
| static_assert( | |
| std::is_same_v<btree, Btree> || std::is_same_v<const btree, Btree>, | |
| "Btree type must be same or const."); | |
| assert(empty()); | |
| // We can avoid key comparisons because we know the order of the | |
| // values is the same order we'll store them in. | |
| auto iter = other.begin(); | |
| if (iter == other.end()) return; | |
| insert_multi(iter.slot()); | |
| ++iter; | |
| for (; iter != other.end(); ++iter) { | |
| // If the btree is not empty, we can just insert the new value at the end | |
| // of the tree. | |
| internal_emplace(end(), iter.slot()); | |
| } | |
| } | |
| template <typename P> | |
| constexpr bool btree<P>::static_assert_validation() { | |
| static_assert(std::is_nothrow_copy_constructible_v<key_compare>, | |
| "Key comparison must be nothrow copy constructible"); | |
| static_assert(std::is_nothrow_copy_constructible_v<allocator_type>, | |
| "Allocator must be nothrow copy constructible"); | |
| static_assert(std::is_trivially_copyable_v<iterator>, | |
| "iterator not trivially copyable."); | |
| // Note: We assert that kTargetValues, which is computed from | |
| // Params::kTargetNodeSize, must fit the node_type::field_type. | |
| static_assert( | |
| kNodeSlots < (1 << (8 * sizeof(typename node_type::field_type))), | |
| "target node size too large"); | |
| // Verify that key_compare returns an absl::{weak,strong}_ordering or bool. | |
| static_assert( | |
| compare_has_valid_result_type<key_compare, key_type>(), | |
| "key comparison function must return absl::{weak,strong}_ordering or " | |
| "bool."); | |
| // Test the assumption made in setting kNodeSlotSpace. | |
| static_assert(node_type::MinimumOverhead() >= sizeof(void *) + 4, | |
| "node space assumption incorrect"); | |
| return true; | |
| } | |
| template <typename P> | |
| template <typename K> | |
| auto btree<P>::lower_bound_equal(const K &key) const | |
| -> std::pair<iterator, bool> { | |
| const SearchResult<iterator, is_key_compare_to::value> res = | |
| internal_lower_bound(key); | |
| const iterator lower = iterator(internal_end(res.value)); | |
| const bool equal = res.HasMatch() | |
| ? res.IsEq() | |
| : lower != end() && !compare_keys(key, lower.key()); | |
| return {lower, equal}; | |
| } | |
| template <typename P> | |
| template <typename K> | |
| auto btree<P>::equal_range(const K &key) -> std::pair<iterator, iterator> { | |
| const std::pair<iterator, bool> lower_and_equal = lower_bound_equal(key); | |
| const iterator lower = lower_and_equal.first; | |
| if (!lower_and_equal.second) { | |
| return {lower, lower}; | |
| } | |
| const iterator next = std::next(lower); | |
| if (!params_type::template can_have_multiple_equivalent_keys<K>()) { | |
| // The next iterator after lower must point to a key greater than `key`. | |
| // Note: if this assert fails, then it may indicate that the comparator does | |
| // not meet the equivalence requirements for Compare | |
| // (see https://en.cppreference.com/w/cpp/named_req/Compare). | |
| assert(next == end() || compare_keys(key, next.key())); | |
| return {lower, next}; | |
| } | |
| // Try once more to avoid the call to upper_bound() if there's only one | |
| // equivalent key. This should prevent all calls to upper_bound() in cases of | |
| // unique-containers with heterogeneous comparators in which all comparison | |
| // operators have the same equivalence classes. | |
| if (next == end() || compare_keys(key, next.key())) return {lower, next}; | |
| // In this case, we need to call upper_bound() to avoid worst case O(N) | |
| // behavior if we were to iterate over equal keys. | |
| return {lower, upper_bound(key)}; | |
| } | |
| template <typename P> | |
| template <typename K, typename... Args> | |
| auto btree<P>::insert_unique(const K &key, Args &&...args) | |
| -> std::pair<iterator, bool> { | |
| if (empty()) { | |
| mutable_root() = mutable_rightmost() = new_leaf_root_node(1); | |
| } | |
| SearchResult<iterator, is_key_compare_to::value> res = internal_locate(key); | |
| iterator iter = res.value; | |
| if (res.HasMatch()) { | |
| if (res.IsEq()) { | |
| // The key already exists in the tree, do nothing. | |
| return {iter, false}; | |
| } | |
| } else { | |
| iterator last = internal_last(iter); | |
| if (last.node_ && !compare_keys(key, last.key())) { | |
| // The key already exists in the tree, do nothing. | |
| return {last, false}; | |
| } | |
| } | |
| return {internal_emplace(iter, std::forward<Args>(args)...), true}; | |
| } | |
| template <typename P> | |
| template <typename K, typename... Args> | |
| inline auto btree<P>::insert_hint_unique(iterator position, const K &key, | |
| Args &&...args) | |
| -> std::pair<iterator, bool> { | |
| if (!empty()) { | |
| if (position == end() || compare_keys(key, position.key())) { | |
| if (position == begin() || compare_keys(std::prev(position).key(), key)) { | |
| // prev.key() < key < position.key() | |
| return {internal_emplace(position, std::forward<Args>(args)...), true}; | |
| } | |
| } else if (compare_keys(position.key(), key)) { | |
| ++position; | |
| if (position == end() || compare_keys(key, position.key())) { | |
| // {original `position`}.key() < key < {current `position`}.key() | |
| return {internal_emplace(position, std::forward<Args>(args)...), true}; | |
| } | |
| } else { | |
| // position.key() == key | |
| return {position, false}; | |
| } | |
| } | |
| return insert_unique(key, std::forward<Args>(args)...); | |
| } | |
| template <typename P> | |
| template <typename InputIterator, typename> | |
| void btree<P>::insert_iterator_unique(InputIterator b, InputIterator e, int) { | |
| for (; b != e; ++b) { | |
| insert_hint_unique(end(), params_type::key(*b), *b); | |
| } | |
| } | |
| template <typename P> | |
| template <typename InputIterator> | |
| void btree<P>::insert_iterator_unique(InputIterator b, InputIterator e, char) { | |
| for (; b != e; ++b) { | |
| // Use a node handle to manage a temp slot. | |
| auto node_handle = | |
| CommonAccess::Construct<node_handle_type>(get_allocator(), *b); | |
| slot_type *slot = CommonAccess::GetSlot(node_handle); | |
| insert_hint_unique(end(), params_type::key(slot), slot); | |
| } | |
| } | |
| template <typename P> | |
| template <typename ValueType> | |
| auto btree<P>::insert_multi(const key_type &key, ValueType &&v) -> iterator { | |
| if (empty()) { | |
| mutable_root() = mutable_rightmost() = new_leaf_root_node(1); | |
| } | |
| iterator iter = internal_upper_bound(key); | |
| if (iter.node_ == nullptr) { | |
| iter = end(); | |
| } | |
| return internal_emplace(iter, std::forward<ValueType>(v)); | |
| } | |
| template <typename P> | |
| template <typename ValueType> | |
| auto btree<P>::insert_hint_multi(iterator position, ValueType &&v) -> iterator { | |
| if (!empty()) { | |
| const key_type &key = params_type::key(v); | |
| if (position == end() || !compare_keys(position.key(), key)) { | |
| if (position == begin() || | |
| !compare_keys(key, std::prev(position).key())) { | |
| // prev.key() <= key <= position.key() | |
| return internal_emplace(position, std::forward<ValueType>(v)); | |
| } | |
| } else { | |
| ++position; | |
| if (position == end() || !compare_keys(position.key(), key)) { | |
| // {original `position`}.key() < key < {current `position`}.key() | |
| return internal_emplace(position, std::forward<ValueType>(v)); | |
| } | |
| } | |
| } | |
| return insert_multi(std::forward<ValueType>(v)); | |
| } | |
| template <typename P> | |
| template <typename InputIterator> | |
| void btree<P>::insert_iterator_multi(InputIterator b, InputIterator e) { | |
| for (; b != e; ++b) { | |
| insert_hint_multi(end(), *b); | |
| } | |
| } | |
| template <typename P> | |
| auto btree<P>::operator=(const btree &other) -> btree & { | |
| if (this != &other) { | |
| clear(); | |
| *mutable_key_comp() = other.key_comp(); | |
| if (std::allocator_traits< | |
| allocator_type>::propagate_on_container_copy_assignment::value) { | |
| *mutable_allocator() = other.allocator(); | |
| } | |
| copy_or_move_values_in_order(other); | |
| } | |
| return *this; | |
| } | |
| template <typename P> | |
| auto btree<P>::operator=(btree &&other) noexcept -> btree & { | |
| if (this != &other) { | |
| clear(); | |
| using std::swap; | |
| if (std::allocator_traits< | |
| allocator_type>::propagate_on_container_move_assignment::value) { | |
| swap(root_, other.root_); | |
| // Note: `rightmost_` also contains the allocator and the key comparator. | |
| swap(rightmost_, other.rightmost_); | |
| swap(size_, other.size_); | |
| } else { | |
| if (allocator() == other.allocator()) { | |
| swap(mutable_root(), other.mutable_root()); | |
| swap(*mutable_key_comp(), *other.mutable_key_comp()); | |
| swap(mutable_rightmost(), other.mutable_rightmost()); | |
| swap(size_, other.size_); | |
| } else { | |
| // We aren't allowed to propagate the allocator and the allocator is | |
| // different so we can't take over its memory. We must move each element | |
| // individually. We need both `other` and `this` to have `other`s key | |
| // comparator while moving the values so we can't swap the key | |
| // comparators. | |
| *mutable_key_comp() = other.key_comp(); | |
| copy_or_move_values_in_order(other); | |
| } | |
| } | |
| } | |
| return *this; | |
| } | |
| template <typename P> | |
| auto btree<P>::erase(iterator iter) -> iterator { | |
| iter.node_->value_destroy(static_cast<field_type>(iter.position_), | |
| mutable_allocator()); | |
| iter.update_generation(); | |
| const bool internal_delete = iter.node_->is_internal(); | |
| if (internal_delete) { | |
| // Deletion of a value on an internal node. First, transfer the largest | |
| // value from our left child here, then erase/rebalance from that position. | |
| // We can get to the largest value from our left child by decrementing iter. | |
| iterator internal_iter(iter); | |
| --iter; | |
| assert(iter.node_->is_leaf()); | |
| internal_iter.node_->transfer( | |
| static_cast<size_type>(internal_iter.position_), | |
| static_cast<size_type>(iter.position_), iter.node_, | |
| mutable_allocator()); | |
| } else { | |
| // Shift values after erased position in leaf. In the internal case, we | |
| // don't need to do this because the leaf position is the end of the node. | |
| const field_type transfer_from = | |
| static_cast<field_type>(iter.position_ + 1); | |
| const field_type num_to_transfer = iter.node_->finish() - transfer_from; | |
| iter.node_->transfer_n(num_to_transfer, | |
| static_cast<size_type>(iter.position_), | |
| transfer_from, iter.node_, mutable_allocator()); | |
| } | |
| // Update node finish and container size. | |
| iter.node_->set_finish(iter.node_->finish() - 1); | |
| --size_; | |
| // We want to return the next value after the one we just erased. If we | |
| // erased from an internal node (internal_delete == true), then the next | |
| // value is ++(++iter). If we erased from a leaf node (internal_delete == | |
| // false) then the next value is ++iter. Note that ++iter may point to an | |
| // internal node and the value in the internal node may move to a leaf node | |
| // (iter.node_) when rebalancing is performed at the leaf level. | |
| iterator res = rebalance_after_delete(iter); | |
| // If we erased from an internal node, advance the iterator. | |
| if (internal_delete) { | |
| ++res; | |
| } | |
| return res; | |
| } | |
| template <typename P> | |
| auto btree<P>::rebalance_after_delete(iterator iter) -> iterator { | |
| // Merge/rebalance as we walk back up the tree. | |
| iterator res(iter); | |
| bool first_iteration = true; | |
| for (;;) { | |
| if (iter.node_ == root()) { | |
| try_shrink(); | |
| if (empty()) { | |
| return end(); | |
| } | |
| break; | |
| } | |
| if (iter.node_->count() >= kMinNodeValues) { | |
| break; | |
| } | |
| bool merged = try_merge_or_rebalance(&iter); | |
| // On the first iteration, we should update `res` with `iter` because `res` | |
| // may have been invalidated. | |
| if (first_iteration) { | |
| res = iter; | |
| first_iteration = false; | |
| } | |
| if (!merged) { | |
| break; | |
| } | |
| iter.position_ = iter.node_->position(); | |
| iter.node_ = iter.node_->parent(); | |
| } | |
| res.update_generation(); | |
| // Adjust our return value. If we're pointing at the end of a node, advance | |
| // the iterator. | |
| if (res.position_ == res.node_->finish()) { | |
| res.position_ = res.node_->finish() - 1; | |
| ++res; | |
| } | |
| return res; | |
| } | |
| // Note: we tried implementing this more efficiently by erasing all of the | |
| // elements in [begin, end) at once and then doing rebalancing once at the end | |
| // (rather than interleaving deletion and rebalancing), but that adds a lot of | |
| // complexity, which seems to outweigh the performance win. | |
| template <typename P> | |
| auto btree<P>::erase_range(iterator begin, iterator end) | |
| -> std::pair<size_type, iterator> { | |
| size_type count = static_cast<size_type>(end - begin); | |
| assert(count >= 0); | |
| if (count == 0) { | |
| return {0, begin}; | |
| } | |
| if (static_cast<size_type>(count) == size_) { | |
| clear(); | |
| return {count, this->end()}; | |
| } | |
| if (begin.node_ == end.node_) { | |
| assert(end.position_ > begin.position_); | |
| begin.node_->remove_values( | |
| static_cast<field_type>(begin.position_), | |
| static_cast<field_type>(end.position_ - begin.position_), | |
| mutable_allocator()); | |
| size_ -= count; | |
| return {count, rebalance_after_delete(begin)}; | |
| } | |
| const size_type target_size = size_ - count; | |
| while (size_ > target_size) { | |
| if (begin.node_->is_leaf()) { | |
| const size_type remaining_to_erase = size_ - target_size; | |
| const size_type remaining_in_node = | |
| static_cast<size_type>(begin.node_->finish() - begin.position_); | |
| const field_type to_erase = static_cast<field_type>( | |
| (std::min)(remaining_to_erase, remaining_in_node)); | |
| begin.node_->remove_values(static_cast<field_type>(begin.position_), | |
| to_erase, mutable_allocator()); | |
| size_ -= to_erase; | |
| begin = rebalance_after_delete(begin); | |
| } else { | |
| begin = erase(begin); | |
| } | |
| } | |
| begin.update_generation(); | |
| return {count, begin}; | |
| } | |
| template <typename P> | |
| void btree<P>::clear() { | |
| if (!empty()) { | |
| node_type::clear_and_delete(root(), mutable_allocator()); | |
| } | |
| mutable_root() = mutable_rightmost() = EmptyNode(); | |
| size_ = 0; | |
| } | |
| template <typename P> | |
| void btree<P>::swap(btree &other) { | |
| using std::swap; | |
| if (std::allocator_traits< | |
| allocator_type>::propagate_on_container_swap::value) { | |
| // Note: `rightmost_` also contains the allocator and the key comparator. | |
| swap(rightmost_, other.rightmost_); | |
| } else { | |
| // It's undefined behavior if the allocators are unequal here. | |
| assert(allocator() == other.allocator()); | |
| swap(mutable_rightmost(), other.mutable_rightmost()); | |
| swap(*mutable_key_comp(), *other.mutable_key_comp()); | |
| } | |
| swap(mutable_root(), other.mutable_root()); | |
| swap(size_, other.size_); | |
| } | |
| template <typename P> | |
| void btree<P>::verify() const { | |
| assert(root() != nullptr); | |
| assert(leftmost() != nullptr); | |
| assert(rightmost() != nullptr); | |
| assert(empty() || size() == internal_verify(root(), nullptr, nullptr)); | |
| assert(leftmost() == (++const_iterator(root(), -1)).node_); | |
| assert(rightmost() == (--const_iterator(root(), root()->finish())).node_); | |
| assert(leftmost()->is_leaf()); | |
| assert(rightmost()->is_leaf()); | |
| } | |
| template <typename P> | |
| void btree<P>::rebalance_or_split(iterator *iter) { | |
| node_type *&node = iter->node_; | |
| int &insert_position = iter->position_; | |
| assert(node->count() == node->max_count()); | |
| assert(kNodeSlots == node->max_count()); | |
| // First try to make room on the node by rebalancing. | |
| node_type *parent = node->parent(); | |
| if (node != root()) { | |
| if (node->position() > parent->start()) { | |
| // Try rebalancing with our left sibling. | |
| node_type *left = parent->child(node->position() - 1); | |
| assert(left->max_count() == kNodeSlots); | |
| if (left->count() < kNodeSlots) { | |
| // We bias rebalancing based on the position being inserted. If we're | |
| // inserting at the end of the right node then we bias rebalancing to | |
| // fill up the left node. | |
| field_type to_move = | |
| (kNodeSlots - left->count()) / | |
| (1 + (static_cast<field_type>(insert_position) < kNodeSlots)); | |
| to_move = (std::max)(field_type{1}, to_move); | |
| if (static_cast<field_type>(insert_position) - to_move >= | |
| node->start() || | |
| left->count() + to_move < kNodeSlots) { | |
| left->rebalance_right_to_left(to_move, node, mutable_allocator()); | |
| assert(node->max_count() - node->count() == to_move); | |
| insert_position = static_cast<int>( | |
| static_cast<field_type>(insert_position) - to_move); | |
| if (insert_position < node->start()) { | |
| insert_position = insert_position + left->count() + 1; | |
| node = left; | |
| } | |
| assert(node->count() < node->max_count()); | |
| return; | |
| } | |
| } | |
| } | |
| if (node->position() < parent->finish()) { | |
| // Try rebalancing with our right sibling. | |
| node_type *right = parent->child(node->position() + 1); | |
| assert(right->max_count() == kNodeSlots); | |
| if (right->count() < kNodeSlots) { | |
| // We bias rebalancing based on the position being inserted. If we're | |
| // inserting at the beginning of the left node then we bias rebalancing | |
| // to fill up the right node. | |
| field_type to_move = (kNodeSlots - right->count()) / | |
| (1 + (insert_position > node->start())); | |
| to_move = (std::max)(field_type{1}, to_move); | |
| if (static_cast<field_type>(insert_position) <= | |
| node->finish() - to_move || | |
| right->count() + to_move < kNodeSlots) { | |
| node->rebalance_left_to_right(to_move, right, mutable_allocator()); | |
| if (insert_position > node->finish()) { | |
| insert_position = insert_position - node->count() - 1; | |
| node = right; | |
| } | |
| assert(node->count() < node->max_count()); | |
| return; | |
| } | |
| } | |
| } | |
| // Rebalancing failed, make sure there is room on the parent node for a new | |
| // value. | |
| assert(parent->max_count() == kNodeSlots); | |
| if (parent->count() == kNodeSlots) { | |
| iterator parent_iter(parent, node->position()); | |
| rebalance_or_split(&parent_iter); | |
| parent = node->parent(); | |
| } | |
| } else { | |
| // Rebalancing not possible because this is the root node. | |
| // Create a new root node and set the current root node as the child of the | |
| // new root. | |
| parent = new_internal_node(/*position=*/0, parent); | |
| parent->set_generation(root()->generation()); | |
| parent->init_child(parent->start(), node); | |
| mutable_root() = parent; | |
| // If the former root was a leaf node, then it's now the rightmost node. | |
| assert(parent->start_child()->is_internal() || | |
| parent->start_child() == rightmost()); | |
| } | |
| // Split the node. | |
| node_type *split_node; | |
| if (node->is_leaf()) { | |
| split_node = new_leaf_node(node->position() + 1, parent); | |
| node->split(insert_position, split_node, mutable_allocator()); | |
| if (rightmost() == node) mutable_rightmost() = split_node; | |
| } else { | |
| split_node = new_internal_node(node->position() + 1, parent); | |
| node->split(insert_position, split_node, mutable_allocator()); | |
| } | |
| if (insert_position > node->finish()) { | |
| insert_position = insert_position - node->count() - 1; | |
| node = split_node; | |
| } | |
| } | |
| template <typename P> | |
| void btree<P>::merge_nodes(node_type *left, node_type *right) { | |
| left->merge(right, mutable_allocator()); | |
| if (rightmost() == right) mutable_rightmost() = left; | |
| } | |
| template <typename P> | |
| bool btree<P>::try_merge_or_rebalance(iterator *iter) { | |
| node_type *parent = iter->node_->parent(); | |
| if (iter->node_->position() > parent->start()) { | |
| // Try merging with our left sibling. | |
| node_type *left = parent->child(iter->node_->position() - 1); | |
| assert(left->max_count() == kNodeSlots); | |
| if (1U + left->count() + iter->node_->count() <= kNodeSlots) { | |
| iter->position_ += 1 + left->count(); | |
| merge_nodes(left, iter->node_); | |
| iter->node_ = left; | |
| return true; | |
| } | |
| } | |
| if (iter->node_->position() < parent->finish()) { | |
| // Try merging with our right sibling. | |
| node_type *right = parent->child(iter->node_->position() + 1); | |
| assert(right->max_count() == kNodeSlots); | |
| if (1U + iter->node_->count() + right->count() <= kNodeSlots) { | |
| merge_nodes(iter->node_, right); | |
| return true; | |
| } | |
| // Try rebalancing with our right sibling. We don't perform rebalancing if | |
| // we deleted the first element from iter->node_ and the node is not | |
| // empty. This is a small optimization for the common pattern of deleting | |
| // from the front of the tree. | |
| if (right->count() > kMinNodeValues && | |
| (iter->node_->count() == 0 || iter->position_ > iter->node_->start())) { | |
| field_type to_move = (right->count() - iter->node_->count()) / 2; | |
| to_move = | |
| (std::min)(to_move, static_cast<field_type>(right->count() - 1)); | |
| iter->node_->rebalance_right_to_left(to_move, right, mutable_allocator()); | |
| return false; | |
| } | |
| } | |
| if (iter->node_->position() > parent->start()) { | |
| // Try rebalancing with our left sibling. We don't perform rebalancing if | |
| // we deleted the last element from iter->node_ and the node is not | |
| // empty. This is a small optimization for the common pattern of deleting | |
| // from the back of the tree. | |
| node_type *left = parent->child(iter->node_->position() - 1); | |
| if (left->count() > kMinNodeValues && | |
| (iter->node_->count() == 0 || | |
| iter->position_ < iter->node_->finish())) { | |
| field_type to_move = (left->count() - iter->node_->count()) / 2; | |
| to_move = (std::min)(to_move, static_cast<field_type>(left->count() - 1)); | |
| left->rebalance_left_to_right(to_move, iter->node_, mutable_allocator()); | |
| iter->position_ += to_move; | |
| return false; | |
| } | |
| } | |
| return false; | |
| } | |
| template <typename P> | |
| void btree<P>::try_shrink() { | |
| node_type *orig_root = root(); | |
| if (orig_root->count() > 0) { | |
| return; | |
| } | |
| // Deleted the last item on the root node, shrink the height of the tree. | |
| if (orig_root->is_leaf()) { | |
| assert(size() == 0); | |
| mutable_root() = mutable_rightmost() = EmptyNode(); | |
| } else { | |
| node_type *child = orig_root->start_child(); | |
| child->make_root(); | |
| mutable_root() = child; | |
| } | |
| node_type::clear_and_delete(orig_root, mutable_allocator()); | |
| } | |
| template <typename P> | |
| template <typename IterType> | |
| inline IterType btree<P>::internal_last(IterType iter) { | |
| assert(iter.node_ != nullptr); | |
| while (iter.position_ == iter.node_->finish()) { | |
| iter.position_ = iter.node_->position(); | |
| iter.node_ = iter.node_->parent(); | |
| if (iter.node_->is_leaf()) { | |
| iter.node_ = nullptr; | |
| break; | |
| } | |
| } | |
| iter.update_generation(); | |
| return iter; | |
| } | |
| template <typename P> | |
| template <typename... Args> | |
| inline auto btree<P>::internal_emplace(iterator iter, Args &&...args) | |
| -> iterator { | |
| if (iter.node_->is_internal()) { | |
| // We can't insert on an internal node. Instead, we'll insert after the | |
| // previous value which is guaranteed to be on a leaf node. | |
| --iter; | |
| ++iter.position_; | |
| } | |
| const field_type max_count = iter.node_->max_count(); | |
| allocator_type *alloc = mutable_allocator(); | |
| const auto transfer_and_delete = [&](node_type *old_node, | |
| node_type *new_node) { | |
| new_node->transfer_n(old_node->count(), new_node->start(), | |
| old_node->start(), old_node, alloc); | |
| new_node->set_finish(old_node->finish()); | |
| old_node->set_finish(old_node->start()); | |
| new_node->set_generation(old_node->generation()); | |
| node_type::clear_and_delete(old_node, alloc); | |
| }; | |
| const auto replace_leaf_root_node = [&](field_type new_node_size) { | |
| assert(iter.node_ == root()); | |
| node_type *old_root = iter.node_; | |
| node_type *new_root = iter.node_ = new_leaf_root_node(new_node_size); | |
| transfer_and_delete(old_root, new_root); | |
| mutable_root() = mutable_rightmost() = new_root; | |
| }; | |
| bool replaced_node = false; | |
| if (iter.node_->count() == max_count) { | |
| // Make room in the leaf for the new item. | |
| if (max_count < kNodeSlots) { | |
| // Insertion into the root where the root is smaller than the full node | |
| // size. Simply grow the size of the root node. | |
| replace_leaf_root_node(static_cast<field_type>( | |
| (std::min)(static_cast<int>(kNodeSlots), 2 * max_count))); | |
| replaced_node = true; | |
| } else { | |
| rebalance_or_split(&iter); | |
| } | |
| } | |
| (void)replaced_node; | |
| #if defined(ABSL_HAVE_ADDRESS_SANITIZER) || \ | |
| defined(ABSL_HAVE_HWADDRESS_SANITIZER) | |
| if (!replaced_node) { | |
| assert(iter.node_->is_leaf()); | |
| if (iter.node_->is_root()) { | |
| replace_leaf_root_node(max_count); | |
| } else { | |
| node_type *old_node = iter.node_; | |
| const bool was_rightmost = rightmost() == old_node; | |
| const bool was_leftmost = leftmost() == old_node; | |
| node_type *parent = old_node->parent(); | |
| const field_type position = old_node->position(); | |
| node_type *new_node = iter.node_ = new_leaf_node(position, parent); | |
| parent->set_child_noupdate_position(position, new_node); | |
| transfer_and_delete(old_node, new_node); | |
| if (was_rightmost) mutable_rightmost() = new_node; | |
| // The leftmost node is stored as the parent of the root node. | |
| if (was_leftmost) root()->set_parent(new_node); | |
| } | |
| } | |
| #endif | |
| iter.node_->emplace_value(static_cast<field_type>(iter.position_), alloc, | |
| std::forward<Args>(args)...); | |
| assert( | |
| iter.node_->is_ordered_correctly(static_cast<field_type>(iter.position_), | |
| original_key_compare(key_comp())) && | |
| "If this assert fails, then either (1) the comparator may violate " | |
| "transitivity, i.e. comp(a,b) && comp(b,c) -> comp(a,c) (see " | |
| "https://en.cppreference.com/w/cpp/named_req/Compare), or (2) a " | |
| "key may have been mutated after it was inserted into the tree."); | |
| ++size_; | |
| iter.update_generation(); | |
| return iter; | |
| } | |
| template <typename P> | |
| template <typename K> | |
| inline auto btree<P>::internal_locate(const K &key) const | |
| -> SearchResult<iterator, is_key_compare_to::value> { | |
| iterator iter(const_cast<node_type *>(root())); | |
| for (;;) { | |
| SearchResult<size_type, is_key_compare_to::value> res = | |
| iter.node_->lower_bound(key, key_comp()); | |
| iter.position_ = static_cast<int>(res.value); | |
| if (res.IsEq()) { | |
| return {iter, MatchKind::kEq}; | |
| } | |
| // Note: in the non-key-compare-to case, we don't need to walk all the way | |
| // down the tree if the keys are equal, but determining equality would | |
| // require doing an extra comparison on each node on the way down, and we | |
| // will need to go all the way to the leaf node in the expected case. | |
| if (iter.node_->is_leaf()) { | |
| break; | |
| } | |
| iter.node_ = iter.node_->child(static_cast<field_type>(iter.position_)); | |
| } | |
| // Note: in the non-key-compare-to case, the key may actually be equivalent | |
| // here (and the MatchKind::kNe is ignored). | |
| return {iter, MatchKind::kNe}; | |
| } | |
| template <typename P> | |
| template <typename K> | |
| auto btree<P>::internal_lower_bound(const K &key) const | |
| -> SearchResult<iterator, is_key_compare_to::value> { | |
| if (!params_type::template can_have_multiple_equivalent_keys<K>()) { | |
| SearchResult<iterator, is_key_compare_to::value> ret = internal_locate(key); | |
| ret.value = internal_last(ret.value); | |
| return ret; | |
| } | |
| iterator iter(const_cast<node_type *>(root())); | |
| SearchResult<size_type, is_key_compare_to::value> res; | |
| bool seen_eq = false; | |
| for (;;) { | |
| res = iter.node_->lower_bound(key, key_comp()); | |
| iter.position_ = static_cast<int>(res.value); | |
| if (iter.node_->is_leaf()) { | |
| break; | |
| } | |
| seen_eq = seen_eq || res.IsEq(); | |
| iter.node_ = iter.node_->child(static_cast<field_type>(iter.position_)); | |
| } | |
| if (res.IsEq()) return {iter, MatchKind::kEq}; | |
| return {internal_last(iter), seen_eq ? MatchKind::kEq : MatchKind::kNe}; | |
| } | |
| template <typename P> | |
| template <typename K> | |
| auto btree<P>::internal_upper_bound(const K &key) const -> iterator { | |
| iterator iter(const_cast<node_type *>(root())); | |
| for (;;) { | |
| iter.position_ = static_cast<int>(iter.node_->upper_bound(key, key_comp())); | |
| if (iter.node_->is_leaf()) { | |
| break; | |
| } | |
| iter.node_ = iter.node_->child(static_cast<field_type>(iter.position_)); | |
| } | |
| return internal_last(iter); | |
| } | |
| template <typename P> | |
| template <typename K> | |
| auto btree<P>::internal_find(const K &key) const -> iterator { | |
| SearchResult<iterator, is_key_compare_to::value> res = internal_locate(key); | |
| if (res.HasMatch()) { | |
| if (res.IsEq()) { | |
| return res.value; | |
| } | |
| } else { | |
| const iterator iter = internal_last(res.value); | |
| if (iter.node_ != nullptr && !compare_keys(key, iter.key())) { | |
| return iter; | |
| } | |
| } | |
| return {nullptr, 0}; | |
| } | |
| template <typename P> | |
| typename btree<P>::size_type btree<P>::internal_verify( | |
| const node_type *node, const key_type *lo, const key_type *hi) const { | |
| assert(node->count() > 0); | |
| assert(node->count() <= node->max_count()); | |
| if (lo) { | |
| assert(!compare_keys(node->key(node->start()), *lo)); | |
| } | |
| if (hi) { | |
| assert(!compare_keys(*hi, node->key(node->finish() - 1))); | |
| } | |
| for (int i = node->start() + 1; i < node->finish(); ++i) { | |
| assert(!compare_keys(node->key(i), node->key(i - 1))); | |
| } | |
| size_type count = node->count(); | |
| if (node->is_internal()) { | |
| for (field_type i = node->start(); i <= node->finish(); ++i) { | |
| assert(node->child(i) != nullptr); | |
| assert(node->child(i)->parent() == node); | |
| assert(node->child(i)->position() == i); | |
| count += internal_verify(node->child(i), | |
| i == node->start() ? lo : &node->key(i - 1), | |
| i == node->finish() ? hi : &node->key(i)); | |
| } | |
| } | |
| return count; | |
| } | |
| struct btree_access { | |
| template <typename BtreeContainer, typename Pred> | |
| static auto erase_if(BtreeContainer &container, Pred pred) -> | |
| typename BtreeContainer::size_type { | |
| const auto initial_size = container.size(); | |
| auto &tree = container.tree_; | |
| auto *alloc = tree.mutable_allocator(); | |
| for (auto it = container.begin(); it != container.end();) { | |
| if (!pred(*it)) { | |
| ++it; | |
| continue; | |
| } | |
| auto *node = it.node_; | |
| if (node->is_internal()) { | |
| // Handle internal nodes normally. | |
| it = container.erase(it); | |
| continue; | |
| } | |
| // If this is a leaf node, then we do all the erases from this node | |
| // at once before doing rebalancing. | |
| // The current position to transfer slots to. | |
| int to_pos = it.position_; | |
| node->value_destroy(it.position_, alloc); | |
| while (++it.position_ < node->finish()) { | |
| it.update_generation(); | |
| if (pred(*it)) { | |
| node->value_destroy(it.position_, alloc); | |
| } else { | |
| node->transfer(node->slot(to_pos++), node->slot(it.position_), alloc); | |
| } | |
| } | |
| const int num_deleted = node->finish() - to_pos; | |
| tree.size_ -= num_deleted; | |
| node->set_finish(to_pos); | |
| it.position_ = to_pos; | |
| it = tree.rebalance_after_delete(it); | |
| } | |
| return initial_size - container.size(); | |
| } | |
| }; | |
| #undef ABSL_BTREE_ENABLE_GENERATIONS | |
| } // namespace container_internal | |
| ABSL_NAMESPACE_END | |
| } // namespace absl | |
| #endif // ABSL_CONTAINER_INTERNAL_BTREE_H_ |