| // Copyright (c) 2018 Google LLC. |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| // |
| #include <algorithm> |
| |
| #include "source/opcode.h" |
| #include "source/spirv_target_env.h" |
| #include "source/val/instruction.h" |
| #include "source/val/validate.h" |
| #include "source/val/validation_state.h" |
| |
| namespace spvtools { |
| namespace val { |
| namespace { |
| |
| spv_result_t ValidateEntryPoint(ValidationState_t& _, const Instruction* inst) { |
| const auto entry_point_id = inst->GetOperandAs<uint32_t>(1); |
| auto entry_point = _.FindDef(entry_point_id); |
| if (!entry_point || SpvOpFunction != entry_point->opcode()) { |
| return _.diag(SPV_ERROR_INVALID_ID, inst) |
| << "OpEntryPoint Entry Point <id> '" << _.getIdName(entry_point_id) |
| << "' is not a function."; |
| } |
| |
| // Only check the shader execution models |
| const SpvExecutionModel execution_model = |
| inst->GetOperandAs<SpvExecutionModel>(0); |
| if (execution_model != SpvExecutionModelKernel) { |
| const auto entry_point_type_id = entry_point->GetOperandAs<uint32_t>(3); |
| const auto entry_point_type = _.FindDef(entry_point_type_id); |
| if (!entry_point_type || 3 != entry_point_type->words().size()) { |
| return _.diag(SPV_ERROR_INVALID_ID, inst) |
| << _.VkErrorID(4633) << "OpEntryPoint Entry Point <id> '" |
| << _.getIdName(entry_point_id) |
| << "'s function parameter count is not zero."; |
| } |
| } |
| |
| auto return_type = _.FindDef(entry_point->type_id()); |
| if (!return_type || SpvOpTypeVoid != return_type->opcode()) { |
| return _.diag(SPV_ERROR_INVALID_ID, inst) |
| << _.VkErrorID(4633) << "OpEntryPoint Entry Point <id> '" |
| << _.getIdName(entry_point_id) |
| << "'s function return type is not void."; |
| } |
| |
| const auto* execution_modes = _.GetExecutionModes(entry_point_id); |
| if (_.HasCapability(SpvCapabilityShader)) { |
| switch (execution_model) { |
| case SpvExecutionModelFragment: |
| if (execution_modes && |
| execution_modes->count(SpvExecutionModeOriginUpperLeft) && |
| execution_modes->count(SpvExecutionModeOriginLowerLeft)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << "Fragment execution model entry points can only specify " |
| "one of OriginUpperLeft or OriginLowerLeft execution " |
| "modes."; |
| } |
| if (!execution_modes || |
| (!execution_modes->count(SpvExecutionModeOriginUpperLeft) && |
| !execution_modes->count(SpvExecutionModeOriginLowerLeft))) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << "Fragment execution model entry points require either an " |
| "OriginUpperLeft or OriginLowerLeft execution mode."; |
| } |
| if (execution_modes && |
| 1 < std::count_if(execution_modes->begin(), execution_modes->end(), |
| [](const SpvExecutionMode& mode) { |
| switch (mode) { |
| case SpvExecutionModeDepthGreater: |
| case SpvExecutionModeDepthLess: |
| case SpvExecutionModeDepthUnchanged: |
| return true; |
| default: |
| return false; |
| } |
| })) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << "Fragment execution model entry points can specify at most " |
| "one of DepthGreater, DepthLess or DepthUnchanged " |
| "execution modes."; |
| } |
| if (execution_modes && |
| 1 < std::count_if( |
| execution_modes->begin(), execution_modes->end(), |
| [](const SpvExecutionMode& mode) { |
| switch (mode) { |
| case SpvExecutionModePixelInterlockOrderedEXT: |
| case SpvExecutionModePixelInterlockUnorderedEXT: |
| case SpvExecutionModeSampleInterlockOrderedEXT: |
| case SpvExecutionModeSampleInterlockUnorderedEXT: |
| case SpvExecutionModeShadingRateInterlockOrderedEXT: |
| case SpvExecutionModeShadingRateInterlockUnorderedEXT: |
| return true; |
| default: |
| return false; |
| } |
| })) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << "Fragment execution model entry points can specify at most " |
| "one fragment shader interlock execution mode."; |
| } |
| if (execution_modes && |
| 1 < std::count_if( |
| execution_modes->begin(), execution_modes->end(), |
| [](const SpvExecutionMode& mode) { |
| switch (mode) { |
| case SpvExecutionModeStencilRefUnchangedFrontAMD: |
| case SpvExecutionModeStencilRefLessFrontAMD: |
| case SpvExecutionModeStencilRefGreaterFrontAMD: |
| return true; |
| default: |
| return false; |
| } |
| })) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << "Fragment execution model entry points can specify at most " |
| "one of StencilRefUnchangedFrontAMD, " |
| "StencilRefLessFrontAMD or StencilRefGreaterFrontAMD " |
| "execution modes."; |
| } |
| if (execution_modes && |
| 1 < std::count_if( |
| execution_modes->begin(), execution_modes->end(), |
| [](const SpvExecutionMode& mode) { |
| switch (mode) { |
| case SpvExecutionModeStencilRefUnchangedBackAMD: |
| case SpvExecutionModeStencilRefLessBackAMD: |
| case SpvExecutionModeStencilRefGreaterBackAMD: |
| return true; |
| default: |
| return false; |
| } |
| })) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << "Fragment execution model entry points can specify at most " |
| "one of StencilRefUnchangedBackAMD, " |
| "StencilRefLessBackAMD or StencilRefGreaterBackAMD " |
| "execution modes."; |
| } |
| break; |
| case SpvExecutionModelTessellationControl: |
| case SpvExecutionModelTessellationEvaluation: |
| if (execution_modes && |
| 1 < std::count_if(execution_modes->begin(), execution_modes->end(), |
| [](const SpvExecutionMode& mode) { |
| switch (mode) { |
| case SpvExecutionModeSpacingEqual: |
| case SpvExecutionModeSpacingFractionalEven: |
| case SpvExecutionModeSpacingFractionalOdd: |
| return true; |
| default: |
| return false; |
| } |
| })) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << "Tessellation execution model entry points can specify at " |
| "most one of SpacingEqual, SpacingFractionalOdd or " |
| "SpacingFractionalEven execution modes."; |
| } |
| if (execution_modes && |
| 1 < std::count_if(execution_modes->begin(), execution_modes->end(), |
| [](const SpvExecutionMode& mode) { |
| switch (mode) { |
| case SpvExecutionModeTriangles: |
| case SpvExecutionModeQuads: |
| case SpvExecutionModeIsolines: |
| return true; |
| default: |
| return false; |
| } |
| })) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << "Tessellation execution model entry points can specify at " |
| "most one of Triangles, Quads or Isolines execution modes."; |
| } |
| if (execution_modes && |
| 1 < std::count_if(execution_modes->begin(), execution_modes->end(), |
| [](const SpvExecutionMode& mode) { |
| switch (mode) { |
| case SpvExecutionModeVertexOrderCw: |
| case SpvExecutionModeVertexOrderCcw: |
| return true; |
| default: |
| return false; |
| } |
| })) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << "Tessellation execution model entry points can specify at " |
| "most one of VertexOrderCw or VertexOrderCcw execution " |
| "modes."; |
| } |
| break; |
| case SpvExecutionModelGeometry: |
| if (!execution_modes || |
| 1 != std::count_if(execution_modes->begin(), execution_modes->end(), |
| [](const SpvExecutionMode& mode) { |
| switch (mode) { |
| case SpvExecutionModeInputPoints: |
| case SpvExecutionModeInputLines: |
| case SpvExecutionModeInputLinesAdjacency: |
| case SpvExecutionModeTriangles: |
| case SpvExecutionModeInputTrianglesAdjacency: |
| return true; |
| default: |
| return false; |
| } |
| })) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << "Geometry execution model entry points must specify " |
| "exactly one of InputPoints, InputLines, " |
| "InputLinesAdjacency, Triangles or InputTrianglesAdjacency " |
| "execution modes."; |
| } |
| if (!execution_modes || |
| 1 != std::count_if(execution_modes->begin(), execution_modes->end(), |
| [](const SpvExecutionMode& mode) { |
| switch (mode) { |
| case SpvExecutionModeOutputPoints: |
| case SpvExecutionModeOutputLineStrip: |
| case SpvExecutionModeOutputTriangleStrip: |
| return true; |
| default: |
| return false; |
| } |
| })) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << "Geometry execution model entry points must specify " |
| "exactly one of OutputPoints, OutputLineStrip or " |
| "OutputTriangleStrip execution modes."; |
| } |
| break; |
| default: |
| break; |
| } |
| } |
| |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| switch (execution_model) { |
| case SpvExecutionModelGLCompute: |
| if (!execution_modes || |
| !execution_modes->count(SpvExecutionModeLocalSize)) { |
| bool ok = false; |
| for (auto& i : _.ordered_instructions()) { |
| if (i.opcode() == SpvOpDecorate) { |
| if (i.operands().size() > 2) { |
| if (i.GetOperandAs<SpvDecoration>(1) == SpvDecorationBuiltIn && |
| i.GetOperandAs<SpvBuiltIn>(2) == SpvBuiltInWorkgroupSize) { |
| ok = true; |
| break; |
| } |
| } |
| } |
| if (i.opcode() == SpvOpExecutionModeId) { |
| const auto mode = i.GetOperandAs<SpvExecutionMode>(1); |
| if (mode == SpvExecutionModeLocalSizeId) { |
| ok = true; |
| break; |
| } |
| } |
| } |
| if (!ok) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << _.VkErrorID(6426) |
| << "In the Vulkan environment, GLCompute execution model " |
| "entry points require either the LocalSize or " |
| "LocalSizeId execution mode or an object decorated with " |
| "WorkgroupSize must be specified."; |
| } |
| } |
| break; |
| default: |
| break; |
| } |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t ValidateExecutionMode(ValidationState_t& _, |
| const Instruction* inst) { |
| const auto entry_point_id = inst->GetOperandAs<uint32_t>(0); |
| const auto found = std::find(_.entry_points().cbegin(), |
| _.entry_points().cend(), entry_point_id); |
| if (found == _.entry_points().cend()) { |
| return _.diag(SPV_ERROR_INVALID_ID, inst) |
| << "OpExecutionMode Entry Point <id> '" |
| << _.getIdName(entry_point_id) |
| << "' is not the Entry Point " |
| "operand of an OpEntryPoint."; |
| } |
| |
| const auto mode = inst->GetOperandAs<SpvExecutionMode>(1); |
| if (inst->opcode() == SpvOpExecutionModeId) { |
| size_t operand_count = inst->operands().size(); |
| for (size_t i = 2; i < operand_count; ++i) { |
| const auto operand_id = inst->GetOperandAs<uint32_t>(2); |
| const auto* operand_inst = _.FindDef(operand_id); |
| if (mode == SpvExecutionModeSubgroupsPerWorkgroupId || |
| mode == SpvExecutionModeLocalSizeHintId || |
| mode == SpvExecutionModeLocalSizeId) { |
| if (!spvOpcodeIsConstant(operand_inst->opcode())) { |
| return _.diag(SPV_ERROR_INVALID_ID, inst) |
| << "For OpExecutionModeId all Extra Operand ids must be " |
| "constant " |
| "instructions."; |
| } |
| } else { |
| return _.diag(SPV_ERROR_INVALID_ID, inst) |
| << "OpExecutionModeId is only valid when the Mode operand is an " |
| "execution mode that takes Extra Operands that are id " |
| "operands."; |
| } |
| } |
| } else if (mode == SpvExecutionModeSubgroupsPerWorkgroupId || |
| mode == SpvExecutionModeLocalSizeHintId || |
| mode == SpvExecutionModeLocalSizeId) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << "OpExecutionMode is only valid when the Mode operand is an " |
| "execution mode that takes no Extra Operands, or takes Extra " |
| "Operands that are not id operands."; |
| } |
| |
| const auto* models = _.GetExecutionModels(entry_point_id); |
| switch (mode) { |
| case SpvExecutionModeInvocations: |
| case SpvExecutionModeInputPoints: |
| case SpvExecutionModeInputLines: |
| case SpvExecutionModeInputLinesAdjacency: |
| case SpvExecutionModeInputTrianglesAdjacency: |
| case SpvExecutionModeOutputLineStrip: |
| case SpvExecutionModeOutputTriangleStrip: |
| if (!std::all_of(models->begin(), models->end(), |
| [](const SpvExecutionModel& model) { |
| return model == SpvExecutionModelGeometry; |
| })) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << "Execution mode can only be used with the Geometry execution " |
| "model."; |
| } |
| break; |
| case SpvExecutionModeOutputPoints: |
| if (!std::all_of(models->begin(), models->end(), |
| [&_](const SpvExecutionModel& model) { |
| switch (model) { |
| case SpvExecutionModelGeometry: |
| return true; |
| case SpvExecutionModelMeshNV: |
| return _.HasCapability(SpvCapabilityMeshShadingNV); |
| case SpvExecutionModelMeshEXT: |
| return _.HasCapability( |
| SpvCapabilityMeshShadingEXT); |
| default: |
| return false; |
| } |
| })) { |
| if (_.HasCapability(SpvCapabilityMeshShadingNV) || |
| _.HasCapability(SpvCapabilityMeshShadingEXT)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << "Execution mode can only be used with the Geometry " |
| "MeshNV or MeshEXT execution model."; |
| } else { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << "Execution mode can only be used with the Geometry " |
| "execution " |
| "model."; |
| } |
| } |
| break; |
| case SpvExecutionModeSpacingEqual: |
| case SpvExecutionModeSpacingFractionalEven: |
| case SpvExecutionModeSpacingFractionalOdd: |
| case SpvExecutionModeVertexOrderCw: |
| case SpvExecutionModeVertexOrderCcw: |
| case SpvExecutionModePointMode: |
| case SpvExecutionModeQuads: |
| case SpvExecutionModeIsolines: |
| if (!std::all_of( |
| models->begin(), models->end(), |
| [](const SpvExecutionModel& model) { |
| return (model == SpvExecutionModelTessellationControl) || |
| (model == SpvExecutionModelTessellationEvaluation); |
| })) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << "Execution mode can only be used with a tessellation " |
| "execution model."; |
| } |
| break; |
| case SpvExecutionModeTriangles: |
| if (!std::all_of(models->begin(), models->end(), |
| [](const SpvExecutionModel& model) { |
| switch (model) { |
| case SpvExecutionModelGeometry: |
| case SpvExecutionModelTessellationControl: |
| case SpvExecutionModelTessellationEvaluation: |
| return true; |
| default: |
| return false; |
| } |
| })) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << "Execution mode can only be used with a Geometry or " |
| "tessellation execution model."; |
| } |
| break; |
| case SpvExecutionModeOutputVertices: |
| if (!std::all_of(models->begin(), models->end(), |
| [&_](const SpvExecutionModel& model) { |
| switch (model) { |
| case SpvExecutionModelGeometry: |
| case SpvExecutionModelTessellationControl: |
| case SpvExecutionModelTessellationEvaluation: |
| return true; |
| case SpvExecutionModelMeshNV: |
| return _.HasCapability(SpvCapabilityMeshShadingNV); |
| case SpvExecutionModelMeshEXT: |
| return _.HasCapability( |
| SpvCapabilityMeshShadingEXT); |
| default: |
| return false; |
| } |
| })) { |
| if (_.HasCapability(SpvCapabilityMeshShadingNV) || |
| _.HasCapability(SpvCapabilityMeshShadingEXT)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << "Execution mode can only be used with a Geometry, " |
| "tessellation, MeshNV or MeshEXT execution model."; |
| } else { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << "Execution mode can only be used with a Geometry or " |
| "tessellation execution model."; |
| } |
| } |
| break; |
| case SpvExecutionModePixelCenterInteger: |
| case SpvExecutionModeOriginUpperLeft: |
| case SpvExecutionModeOriginLowerLeft: |
| case SpvExecutionModeEarlyFragmentTests: |
| case SpvExecutionModeDepthReplacing: |
| case SpvExecutionModeDepthGreater: |
| case SpvExecutionModeDepthLess: |
| case SpvExecutionModeDepthUnchanged: |
| case SpvExecutionModePixelInterlockOrderedEXT: |
| case SpvExecutionModePixelInterlockUnorderedEXT: |
| case SpvExecutionModeSampleInterlockOrderedEXT: |
| case SpvExecutionModeSampleInterlockUnorderedEXT: |
| case SpvExecutionModeShadingRateInterlockOrderedEXT: |
| case SpvExecutionModeShadingRateInterlockUnorderedEXT: |
| case SpvExecutionModeEarlyAndLateFragmentTestsAMD: |
| case SpvExecutionModeStencilRefUnchangedFrontAMD: |
| case SpvExecutionModeStencilRefGreaterFrontAMD: |
| case SpvExecutionModeStencilRefLessFrontAMD: |
| case SpvExecutionModeStencilRefUnchangedBackAMD: |
| case SpvExecutionModeStencilRefGreaterBackAMD: |
| case SpvExecutionModeStencilRefLessBackAMD: |
| if (!std::all_of(models->begin(), models->end(), |
| [](const SpvExecutionModel& model) { |
| return model == SpvExecutionModelFragment; |
| })) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << "Execution mode can only be used with the Fragment execution " |
| "model."; |
| } |
| break; |
| case SpvExecutionModeLocalSizeHint: |
| case SpvExecutionModeVecTypeHint: |
| case SpvExecutionModeContractionOff: |
| case SpvExecutionModeLocalSizeHintId: |
| if (!std::all_of(models->begin(), models->end(), |
| [](const SpvExecutionModel& model) { |
| return model == SpvExecutionModelKernel; |
| })) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << "Execution mode can only be used with the Kernel execution " |
| "model."; |
| } |
| break; |
| case SpvExecutionModeLocalSize: |
| case SpvExecutionModeLocalSizeId: |
| if (mode == SpvExecutionModeLocalSizeId && !_.IsLocalSizeIdAllowed()) |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << "LocalSizeId mode is not allowed by the current environment."; |
| |
| if (!std::all_of(models->begin(), models->end(), |
| [&_](const SpvExecutionModel& model) { |
| switch (model) { |
| case SpvExecutionModelKernel: |
| case SpvExecutionModelGLCompute: |
| return true; |
| case SpvExecutionModelTaskNV: |
| case SpvExecutionModelMeshNV: |
| return _.HasCapability(SpvCapabilityMeshShadingNV); |
| case SpvExecutionModelTaskEXT: |
| case SpvExecutionModelMeshEXT: |
| return _.HasCapability( |
| SpvCapabilityMeshShadingEXT); |
| default: |
| return false; |
| } |
| })) { |
| if (_.HasCapability(SpvCapabilityMeshShadingNV) || |
| _.HasCapability(SpvCapabilityMeshShadingEXT)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << "Execution mode can only be used with a Kernel, GLCompute, " |
| "MeshNV, MeshEXT, TaskNV or TaskEXT execution model."; |
| } else { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << "Execution mode can only be used with a Kernel or " |
| "GLCompute " |
| "execution model."; |
| } |
| } |
| default: |
| break; |
| } |
| |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| if (mode == SpvExecutionModeOriginLowerLeft) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << _.VkErrorID(4653) |
| << "In the Vulkan environment, the OriginLowerLeft execution mode " |
| "must not be used."; |
| } |
| if (mode == SpvExecutionModePixelCenterInteger) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << _.VkErrorID(4654) |
| << "In the Vulkan environment, the PixelCenterInteger execution " |
| "mode must not be used."; |
| } |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| spv_result_t ValidateMemoryModel(ValidationState_t& _, |
| const Instruction* inst) { |
| // Already produced an error if multiple memory model instructions are |
| // present. |
| if (_.memory_model() != SpvMemoryModelVulkanKHR && |
| _.HasCapability(SpvCapabilityVulkanMemoryModelKHR)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << "VulkanMemoryModelKHR capability must only be specified if " |
| "the VulkanKHR memory model is used."; |
| } |
| |
| if (spvIsOpenCLEnv(_.context()->target_env)) { |
| if ((_.addressing_model() != SpvAddressingModelPhysical32) && |
| (_.addressing_model() != SpvAddressingModelPhysical64)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << "Addressing model must be Physical32 or Physical64 " |
| << "in the OpenCL environment."; |
| } |
| if (_.memory_model() != SpvMemoryModelOpenCL) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << "Memory model must be OpenCL in the OpenCL environment."; |
| } |
| } |
| |
| if (spvIsVulkanEnv(_.context()->target_env)) { |
| if ((_.addressing_model() != SpvAddressingModelLogical) && |
| (_.addressing_model() != SpvAddressingModelPhysicalStorageBuffer64)) { |
| return _.diag(SPV_ERROR_INVALID_DATA, inst) |
| << _.VkErrorID(4635) |
| << "Addressing model must be Logical or PhysicalStorageBuffer64 " |
| << "in the Vulkan environment."; |
| } |
| } |
| return SPV_SUCCESS; |
| } |
| |
| } // namespace |
| |
| spv_result_t ModeSettingPass(ValidationState_t& _, const Instruction* inst) { |
| switch (inst->opcode()) { |
| case SpvOpEntryPoint: |
| if (auto error = ValidateEntryPoint(_, inst)) return error; |
| break; |
| case SpvOpExecutionMode: |
| case SpvOpExecutionModeId: |
| if (auto error = ValidateExecutionMode(_, inst)) return error; |
| break; |
| case SpvOpMemoryModel: |
| if (auto error = ValidateMemoryModel(_, inst)) return error; |
| break; |
| default: |
| break; |
| } |
| return SPV_SUCCESS; |
| } |
| |
| } // namespace val |
| } // namespace spvtools |