| cmake_minimum_required(VERSION 3.22.0 FATAL_ERROR) |
| |
| project(poppler) |
| |
| set(CMAKE_MODULE_PATH ${CMAKE_SOURCE_DIR}/cmake/modules) |
| |
| include(PopplerDefaults) |
| include(PopplerMacros) |
| # Ensure that the user-provided C_FLAGS are used for try_compile() calls. |
| # This is needed since PopplerMacros.cmake clears CMAKE_C_FLAGS and if |
| # CMAKE_TRY_COMPILE_CONFIGURATION is empty CMake only uses the flags |
| # specified in CMAKE_C_FLAGS (https://gitlab.kitware.com/cmake/cmake/-/issues/22414 |
| # and https://gitlab.kitware.com/cmake/cmake/-/issues/19512). |
| # We therefore have to explicitly set CMAKE_TRY_COMPILE_CONFIGURATION until we |
| # depend on a CMake release that includes a fix for those issues. |
| # This is set after including PopplerMacros since that sets the default |
| # CMAKE_BUILD_TYPE and also sets _CMAKE_BUILD_TYPE_UPPER. |
| set(CMAKE_TRY_COMPILE_CONFIGURATION "${_CMAKE_BUILD_TYPE_UPPER}") |
| |
| include(MacroOptionalFindPackage) |
| find_package(PkgConfig) |
| include(TestBigEndian) |
| test_big_endian(WORDS_BIGENDIAN) |
| include(CheckFileOffsetBits) |
| CHECK_FILE_OFFSET_BITS() |
| |
| include(GenerateExportHeader) |
| include(GNUInstallDirs) |
| include(CMakePushCheckState) |
| |
| set(ENABLE_FUZZER FALSE) |
| |
| find_package (ECM 1.6.0 QUIET NO_MODULE) |
| if (ECM_FOUND) |
| include("${ECM_MODULE_DIR}/ECMEnableSanitizers.cmake") |
| |
| if(ECM_ENABLE_SANITIZERS MATCHES fuzzer) |
| set(ENABLE_FUZZER TRUE) |
| endif() |
| endif() |
| |
| set(POPPLER_MAJOR_VERSION "24") |
| set(POPPLER_MINOR_VERSION_STRING "05") |
| # We want the string version to have 08 but the integer version can't have a leading 0 since otherwise it's considered octal |
| # So strip a leading 0 if found in POPPLER_MINOR_VERSION_STRING and store the result in POPPLER_MINOR_VERSION |
| string(REGEX REPLACE "^0?(.+)$" "\\1" POPPLER_MINOR_VERSION "${POPPLER_MINOR_VERSION_STRING}") |
| set(POPPLER_MICRO_VERSION "0") |
| set(POPPLER_VERSION "${POPPLER_MAJOR_VERSION}.${POPPLER_MINOR_VERSION_STRING}.${POPPLER_MICRO_VERSION}") |
| |
| set(CMAKE_CXX_STANDARD 20) |
| set(CMAKE_CXX_STANDARD_REQUIRED ON) |
| set(CMAKE_CXX_EXTENSIONS OFF) |
| set(CMAKE_C_STANDARD 11) |
| set(CMAKE_C_EXTENSIONS OFF) |
| set(CMAKE_LINK_DEPENDS_NO_SHARED TRUE) |
| set(CMAKE_C_VISIBILITY_PRESET hidden) |
| set(CMAKE_CXX_VISIBILITY_PRESET hidden) |
| set(CMAKE_VISIBILITY_INLINES_HIDDEN 1) |
| |
| |
| # command line switches |
| option(ENABLE_UNSTABLE_API_ABI_HEADERS "Install API/ABI unstable xpdf headers." OFF) |
| option(BUILD_GTK_TESTS "Whether to compile the GTK+ test programs." ON) |
| option(BUILD_QT5_TESTS "Whether to compile the Qt5 test programs." ON) |
| option(BUILD_QT6_TESTS "Whether to compile the Qt6 test programs." ON) |
| option(BUILD_CPP_TESTS "Whether to compile the CPP test programs." ON) |
| option(BUILD_MANUAL_TESTS "Whether to compile manual test programs." ON) |
| option(ENABLE_BOOST "Use boost (for Splash backend performance)." ON) |
| option(ENABLE_UTILS "Compile poppler command line utils." ON) |
| option(ENABLE_CPP "Compile poppler cpp wrapper." ON) |
| option(ENABLE_GLIB "Compile poppler glib wrapper." ON) |
| option(ENABLE_GOBJECT_INTROSPECTION "Whether to generate GObject introspection." ON) |
| option(ENABLE_GTK_DOC "Whether to generate glib API documentation." OFF) |
| option(ENABLE_QT5 "Compile poppler qt5 wrapper." ON) |
| option(ENABLE_QT6 "Compile poppler qt6 wrapper." ON) |
| set(ENABLE_LIBOPENJPEG "openjpeg2" CACHE STRING "Use libopenjpeg for JPX streams. Possible values: openjpeg2, unmaintained, none. 'unmaintained' gives you the internal unmaintained decoder. Use at your own risk. 'none' compiles no JPX decoder at all. Default: openjpeg2") |
| set(ENABLE_DCTDECODER "libjpeg" CACHE STRING "Use libjpeg for DCT streams. Possible values: libjpeg, unmaintained, none. will use libjpeg if available or fail if not. 'unmaintained' gives you the internal unmaintained decoder. Use at your own risk. 'none' compiles no DCT decoder at all. Default: libjpeg") |
| option(ENABLE_LCMS "Use LCMS for color management." ON) |
| option(ENABLE_LIBCURL "Build libcurl based HTTP support." ON) |
| option(ENABLE_LIBTIFF "Build code to write images as TIFF (pdfimages/pdftocairo/etc)." ON) |
| option(ENABLE_NSS3 "Build the NSS backend for cryptographic support" ON) |
| option(ENABLE_GPGME "Build the GPG backend for cryptographic support" ON) |
| option(ENABLE_ZLIB_UNCOMPRESS "Use zlib to uncompress flate streams (not totally safe)." OFF) |
| option(USE_FLOAT "Use single precision arithmetic in the Splash backend" OFF) |
| option(BUILD_SHARED_LIBS "Build poppler as a shared library" ON) |
| option(RUN_GPERF_IF_PRESENT "Run gperf if it is found" ON) |
| if(WIN32) |
| option(ENABLE_RELOCATABLE "Do not hardcode the poppler library location (on Windows)." ON) |
| else() |
| set(ENABLE_RELOCATABLE OFF) |
| endif() |
| option(EXTRA_WARN "Enable extra compile warnings" OFF) |
| |
| set(CMAKE_INSTALL_RPATH_USE_LINK_PATH TRUE) |
| |
| set(TESTDATADIR "${CMAKE_SOURCE_DIR}/../test" CACHE STRING "Specify test data dir.") |
| if(NOT (EXISTS ${TESTDATADIR} AND EXISTS ${TESTDATADIR}/test-poppler.c)) |
| message(WARNING " |
| No test data found in $testdatadir. |
| You will not be able to run 'make test' successfully. |
| |
| The test data is not included in the source packages |
| and is also not part of the main git repository. Instead, |
| you can checkout the test data from its own git |
| repository with: |
| |
| git clone git://git.freedesktop.org/git/poppler/test |
| |
| You should checkout the test data as a sibling of your |
| poppler source folder or specify the location of your |
| checkout with -DTESTDATADIR=/path/to/checkoutdir/test. |
| ") |
| endif() |
| |
| if(WIN32) |
| set(_default_fontconfiguration "win32") |
| elseif(ANDROID) |
| set(_default_fontconfiguration "android") |
| else() |
| set(_default_fontconfiguration "fontconfig") |
| endif() |
| set(FONT_CONFIGURATION "${_default_fontconfiguration}" CACHE STRING "The font configuration backend (win32|android|generic|fontconfig).") |
| string(TOLOWER "${FONT_CONFIGURATION}" font_configuration) |
| set(WITH_FONTCONFIGURATION_WIN32 OFF) |
| set(WITH_FONTCONFIGURATION_FONTCONFIG OFF) |
| set(WITH_FONTCONFIGURATION_ANDROID OFF) |
| if(font_configuration STREQUAL "win32") |
| set(WITH_FONTCONFIGURATION_WIN32 ON) |
| elseif(font_configuration STREQUAL "fontconfig") |
| set(WITH_FONTCONFIGURATION_FONTCONFIG ON) |
| elseif(font_configuration STREQUAL "android") |
| set(WITH_FONTCONFIGURATION_ANDROID ON) |
| elseif(font_configuration STREQUAL "generic") |
| message(STATUS "no win32, android, or fontconfig specific code") |
| else() |
| message(FATAL_ERROR "Invalid font configuration setting: ${FONT_CONFIGURATION}") |
| endif() |
| |
| # Enable these unconditionally. |
| set(OPI_SUPPORT ON) |
| set(TEXTOUT_WORD_LIST ON) |
| |
| # setting the minimum required versions for some components |
| set(CAIRO_VERSION "1.16.0") |
| set(GLIB_REQUIRED "2.72") |
| set(GTK_REQUIRED "3.24") |
| set(GDK_PIXBUF_REQUIRED "2.40") |
| set(FREETYPE_VERSION "2.11") |
| set(FONTCONFIG_VERSION "2.13") |
| |
| find_package(Freetype ${FREETYPE_VERSION} REQUIRED) |
| if(WITH_FONTCONFIGURATION_FONTCONFIG) |
| find_package(Fontconfig ${FONTCONFIG_VERSION} REQUIRED) |
| elseif(WITH_FONTCONFIGURATION_ANDROID) |
| find_library(Androidlib NAMES android REQUIRED) |
| endif() |
| |
| macro(find_soft_mandatory_package _enable_option _package_name _package_version) |
| if(${_enable_option}) |
| find_package(${_package_name} ${_package_version}) |
| if(NOT ${_package_name}_FOUND) |
| MESSAGE(FATAL_ERROR "Could not find the ${_package_version} version of ${_package_name}. If you're not interested in the features it provides set the cmake ${_enable_option} option to OFF") |
| endif() |
| endif() |
| endmacro() |
| |
| find_soft_mandatory_package(ENABLE_NSS3 NSS3 3.68) |
| find_soft_mandatory_package(ENABLE_GPGME Gpgmepp 1.19) |
| find_soft_mandatory_package(ENABLE_LIBTIFF TIFF 4.3) |
| |
| macro_optional_find_package(JPEG) |
| macro_optional_find_package(PNG) |
| if(ENABLE_DCTDECODER STREQUAL "libjpeg") |
| if(JPEG_FOUND) |
| include(CheckCSourceCompiles) |
| set(_save_CMAKE_REQUIRED_LIBRARIES "${CMAKE_REQUIRED_LIBRARIES}") |
| set(CMAKE_REQUIRED_LIBRARIES JPEG::JPEG) |
| check_c_source_compiles(" |
| #include <stddef.h> |
| #include <stdio.h> |
| #include <jpeglib.h> |
| int main() { struct jpeg_decompress_struct info; jpeg_mem_src(&info, 0, 0); return 0; }" HAVE_JPEG_MEM_SRC) |
| set(CMAKE_REQUIRED_LIBRARIES "${_save_CMAKE_REQUIRED_LIBRARIES}") |
| |
| if(NOT HAVE_JPEG_MEM_SRC) |
| message(FATAL_ERROR "Your libjpeg is too old. Poppler needs one that provides jpeg_mem_src. That is provided in libjpeg >= 8 or libjpeg-turbo >= 1.1.0. You can \ |
| also decide to use the internal unmaintained DCT decoder or none at all.\n\ |
| Possible options are: -DENABLE_DCTDECODER=libjpeg, -DENABLE_DCTDECODER=none, \ |
| -DENABLE_DCTDECODER=unmaintained") |
| endif() |
| |
| set(ENABLE_LIBJPEG ${JPEG_FOUND}) |
| else() |
| message(STATUS "Could NOT find libjpeg.") |
| message(FATAL_ERROR "Install libjpeg before trying to build poppler. You can \ |
| also decide to use the internal unmaintained DCT decoder or none at all.\n\ |
| Possible options are: -DENABLE_DCTDECODER=libjpeg, -DENABLE_DCTDECODER=none, \ |
| -DENABLE_DCTDECODER=unmaintained") |
| endif() |
| set(HAVE_DCT_DECODER ON) |
| elseif(ENABLE_DCTDECODER STREQUAL "unmaintained") |
| set(ENABLE_LIBJPEG OFF) |
| set(HAVE_DCT_DECODER ON) |
| elseif(ENABLE_DCTDECODER STREQUAL "none") |
| set(ENABLE_LIBJPEG OFF) |
| set(HAVE_DCT_DECODER OFF) |
| else() |
| message(FATAL_ERROR "Invalid ENABLE_DCTDECODER value.") |
| endif() |
| |
| set(QT5_VERSION "5.15") |
| find_soft_mandatory_package(ENABLE_QT5 Qt5Core ${QT5_VERSION}) |
| find_soft_mandatory_package(ENABLE_QT5 Qt5Gui ${QT5_VERSION}) |
| find_soft_mandatory_package(ENABLE_QT5 Qt5Xml ${QT5_VERSION}) |
| find_soft_mandatory_package(ENABLE_QT5 Qt5Widgets ${QT5_VERSION}) |
| find_soft_mandatory_package(ENABLE_QT5 Qt5Test ${QT5_VERSION}) |
| |
| set(QT6_VERSION "6.2") |
| SET(QT_NO_CREATE_VERSIONLESS_TARGETS ON) |
| find_soft_mandatory_package(ENABLE_QT6 Qt6Core ${QT6_VERSION}) |
| find_soft_mandatory_package(ENABLE_QT6 Qt6Gui ${QT6_VERSION}) |
| find_soft_mandatory_package(ENABLE_QT6 Qt6Widgets ${QT6_VERSION}) |
| find_soft_mandatory_package(ENABLE_QT6 Qt6Test ${QT6_VERSION}) |
| |
| # Check for Cairo rendering backend |
| macro_optional_find_package(Cairo ${CAIRO_VERSION}) |
| |
| find_package(Boost 1.74.0) |
| if(Boost_FOUND) |
| set(USE_BOOST_HEADERS ON) |
| elseif(ENABLE_BOOST) |
| message(FATAL_ERROR "-- Boost recommended for Splash. Use ENABLE_BOOST=OFF to skip.") |
| endif() |
| |
| if(CAIRO_FOUND) |
| set(HAVE_CAIRO ${CAIRO_FOUND}) |
| set(CAIRO_FEATURE "#define POPPLER_HAS_CAIRO 1") |
| set(CAIRO_REQ "cairo") |
| set(POPPLER_GLIB_DISABLE_DEPRECATED "") |
| set(POPPLER_GLIB_DISABLE_SINGLE_INCLUDES "") |
| if(ENABLE_GLIB) |
| macro_optional_find_package(GLIB) |
| if(NOT GLIB_FOUND) |
| set(ENABLE_GLIB OFF) |
| endif() |
| endif() |
| if(ENABLE_GLIB) |
| if(ENABLE_GOBJECT_INTROSPECTION) |
| # Check for introspection |
| macro_optional_find_package(GObjectIntrospection 1.72.0) |
| set(HAVE_INTROSPECTION ${INTROSPECTION_FOUND}) |
| endif() |
| set(POPPLER_GLIB_DISABLE_DEPRECATED "${POPPLER_GLIB_DISABLE_DEPRECATED} -DG_DISABLE_DEPRECATED") |
| set(POPPLER_GLIB_DISABLE_SINGLE_INCLUDES "${POPPLER_GLIB_DISABLE_SINGLE_INCLUDES} -DG_DISABLE_SINGLE_INCLUDES") |
| macro_optional_find_package(GTK) |
| endif() |
| else() |
| set(CAIRO_FEATURE "#undef POPPLER_HAS_CAIRO") |
| set(ENABLE_GLIB OFF) |
| endif() |
| |
| # GTK API docs require both the gtk-doc package & python3 support |
| if(ENABLE_GTK_DOC) |
| # Stop the build & raise an error if the package is missing |
| find_package(GtkDoc) |
| if(NOT GtkDoc_FOUND) |
| message(FATAL_ERROR "Install the gtk-doc package to generate GTK API documentation, or set ENABLE_GTK_DOC to Off.") |
| endif() |
| # NOTE: The FindPythonInterp module is deprecated, but the newer FindPython3 module requires CMake >=3.12 |
| find_package(PythonInterp 3) |
| # Also bail out with an error if Python3 is missing |
| if(NOT PYTHONINTERP_FOUND) |
| message(FATAL_ERROR "Install python3 in order to generate GTK API documentation, or set ENABLE_GTK_DOC to Off.") |
| endif() |
| endif() |
| |
| if(ENABLE_CPP) |
| cmake_push_check_state() |
| find_package(Iconv REQUIRED) |
| set(CMAKE_REQUIRED_LIBRARIES Iconv::Iconv) |
| check_cxx_source_compiles(" |
| #include <iconv.h> |
| int main(){ |
| iconv_t conv = 0; |
| const char* in = 0; |
| size_t ilen = 0; |
| char* out = 0; |
| size_t olen = 0; |
| iconv(conv, &in, &ilen, &out, &olen); |
| return 0; |
| } |
| " ICONV_SECOND_ARGUMENT_IS_CONST) |
| cmake_pop_check_state() |
| if(ICONV_SECOND_ARGUMENT_IS_CONST) |
| set(ICONV_CONST "const") |
| endif() |
| endif() |
| find_package(ZLIB REQUIRED) |
| |
| set(WITH_OPENJPEG FALSE) |
| if(ENABLE_LIBOPENJPEG STREQUAL "openjpeg2") |
| find_package(OpenJPEG) |
| set(WITH_OPENJPEG ${OpenJPEG_FOUND}) |
| if(NOT OpenJPEG_FOUND OR OPENJPEG_MAJOR_VERSION VERSION_LESS 2) |
| message(STATUS "Could NOT find openjpeg2.") |
| message(FATAL_ERROR "Install libopenjpeg2 before trying to build poppler. You \ |
| can also decide to use the internal unmaintained JPX decoder or none at all.\n\ |
| Possible options are: -DENABLE_LIBOPENJPEG=openjpeg2, -DENABLE_LIBOPENJPEG=none, \ |
| -DENABLE_LIBOPENJPEG=unmaintained,") |
| endif() |
| set(HAVE_JPX_DECODER ON) |
| elseif(ENABLE_LIBOPENJPEG STREQUAL "unmaintained") |
| set(WITH_OPENJPEG OFF) |
| set(HAVE_JPX_DECODER ON) |
| elseif(ENABLE_LIBOPENJPEG STREQUAL "none") |
| set(WITH_OPENJPEG OFF) |
| set(HAVE_JPX_DECODER OFF) |
| else() |
| message(FATAL_ERROR "Invalid ENABLE_LIBOPENJPEG value: ${ENABLE_LIBOPENJPEG}") |
| endif() |
| set(ENABLE_LIBOPENJPEG "${WITH_OPENJPEG}") |
| |
| find_soft_mandatory_package(ENABLE_LCMS LCMS2 2.9) |
| set(USE_CMS ${ENABLE_LCMS}) |
| |
| find_soft_mandatory_package(ENABLE_LIBCURL CURL 7.68) |
| set(POPPLER_HAS_CURL_SUPPORT ${ENABLE_LIBCURL}) |
| |
| if(MINGW) |
| # Use mingw's ansi stdio extensions |
| add_definitions(-D__USE_MINGW_ANSI_STDIO=1) |
| endif() |
| if(WITH_FONTCONFIGURATION_WIN32) |
| if(MINGW) |
| # Set the minimum required Internet Explorer version to 5.0 |
| add_definitions(-D_WIN32_IE=0x0500) |
| endif() |
| endif() |
| include_directories( |
| ${CMAKE_CURRENT_SOURCE_DIR} |
| ${CMAKE_CURRENT_SOURCE_DIR}/fofi |
| ${CMAKE_CURRENT_SOURCE_DIR}/goo |
| ${CMAKE_CURRENT_SOURCE_DIR}/poppler |
| ${CMAKE_CURRENT_BINARY_DIR} |
| ${CMAKE_CURRENT_BINARY_DIR}/poppler |
| ) |
| |
| if(PNG_FOUND) |
| set(ENABLE_LIBPNG ON) |
| endif() |
| |
| set(SIGNATURE_BACKENDS "") |
| if(ENABLE_NSS3) |
| list(APPEND SIGNATURE_BACKENDS "NSS") |
| endif() |
| if(ENABLE_GPGME) |
| list(APPEND SIGNATURE_BACKENDS "GPG") |
| endif() |
| |
| list(LENGTH SIGNATURE_BACKENDS _signing_backends_count) |
| if (_signing_backends_count GREATER 0) |
| if (NOT DEFAULT_SIGNATURE_BACKEND) |
| # If not specified at compiletime, we take the first one added. |
| # This means that the order we append them to the list is significant |
| list(GET SIGNATURE_BACKENDS 0 DEFAULT_SIGNATURE_BACKEND) |
| endif() |
| set(ENABLE_SIGNATURES ON) |
| endif() |
| if (NOT DEFAULT_SIGNATURE_BACKEND) |
| set(DEFAULT_SIGNATURE_BACKEND "None") |
| endif() |
| |
| # Recent versions of poppler-data install a .pc file. |
| # Use it to determine the encoding data path, if available. |
| # Default to the same prefix otherwise. |
| pkg_check_modules(POPPLER_DATA poppler-data) |
| if(POPPLER_DATA_FOUND) |
| execute_process(COMMAND "${PKG_CONFIG_EXECUTABLE}" --variable=poppler_datadir poppler-data |
| RESULT_VARIABLE _result_var |
| OUTPUT_VARIABLE _output_var OUTPUT_STRIP_TRAILING_WHITESPACE) |
| if(_result_var STREQUAL "0" AND NOT _output_var STREQUAL "") |
| set(POPPLER_DATADIR "${_output_var}") |
| endif() |
| endif() |
| if(NOT DEFINED POPPLER_DATADIR) |
| set(POPPLER_DATADIR "${CMAKE_INSTALL_PREFIX}/share/poppler") |
| endif() |
| |
| if(EXTRA_WARN) |
| set(CMAKE_C_FLAGS "-Wall ${CMAKE_C_FLAGS}") |
| set(CMAKE_CXX_FLAGS "${DEFAULT_COMPILE_WARNINGS_EXTRA} ${CMAKE_CXX_FLAGS}") |
| else() |
| set(CMAKE_C_FLAGS "-Wall ${CMAKE_C_FLAGS}") |
| set(CMAKE_CXX_FLAGS "${DEFAULT_COMPILE_WARNINGS} ${CMAKE_CXX_FLAGS}") |
| endif() |
| |
| include(ConfigureChecks.cmake) |
| configure_file(config.h.cmake ${CMAKE_CURRENT_BINARY_DIR}/config.h) |
| configure_file(poppler/poppler-config.h.cmake ${CMAKE_CURRENT_BINARY_DIR}/poppler/poppler-config.h) |
| |
| find_program(GPERF gperf) |
| find_program(SED sed) |
| |
| set(poppler_SRCS |
| goo/GooString.cc |
| goo/GooTimer.cc |
| goo/ImgWriter.cc |
| goo/JpegWriter.cc |
| goo/NetPBMWriter.cc |
| goo/PNGWriter.cc |
| goo/TiffWriter.cc |
| goo/ft_utils.cc |
| goo/gbase64.cc |
| goo/gbasename.cc |
| goo/gfile.cc |
| goo/glibc.cc |
| goo/glibc_strtok_r.cc |
| goo/grandom.cc |
| goo/gstrtod.cc |
| fofi/FoFiBase.cc |
| fofi/FoFiEncodings.cc |
| fofi/FoFiTrueType.cc |
| fofi/FoFiType1.cc |
| fofi/FoFiType1C.cc |
| fofi/FoFiIdentifier.cc |
| poppler/Annot.cc |
| poppler/AnnotStampImageHelper.cc |
| poppler/Array.cc |
| poppler/CachedFile.cc |
| poppler/Catalog.cc |
| poppler/CharCodeToUnicode.cc |
| poppler/CMap.cc |
| poppler/CryptoSignBackend.cc |
| poppler/DateInfo.cc |
| poppler/Decrypt.cc |
| poppler/Dict.cc |
| poppler/Error.cc |
| poppler/FDPDFDocBuilder.cc |
| poppler/FILECacheLoader.cc |
| poppler/FileSpec.cc |
| poppler/FlateEncoder.cc |
| poppler/FontEncodingTables.cc |
| poppler/Form.cc |
| poppler/FontInfo.cc |
| poppler/Function.cc |
| poppler/Gfx.cc |
| poppler/GfxFont.cc |
| poppler/GfxState.cc |
| poppler/GlobalParams.cc |
| poppler/Hints.cc |
| poppler/ImageEmbeddingUtils.cc |
| poppler/JArithmeticDecoder.cc |
| poppler/JBIG2Stream.cc |
| poppler/JSInfo.cc |
| poppler/Lexer.cc |
| poppler/Link.cc |
| poppler/Linearization.cc |
| poppler/LocalPDFDocBuilder.cc |
| poppler/MarkedContentOutputDev.cc |
| poppler/NameToCharCode.cc |
| poppler/Object.cc |
| poppler/OptionalContent.cc |
| poppler/Outline.cc |
| poppler/OutputDev.cc |
| poppler/Page.cc |
| poppler/PageTransition.cc |
| poppler/Parser.cc |
| poppler/PDFDoc.cc |
| poppler/PDFDocBuilder.cc |
| poppler/PDFDocEncoding.cc |
| poppler/PDFDocFactory.cc |
| poppler/ProfileData.cc |
| poppler/PreScanOutputDev.cc |
| poppler/PSTokenizer.cc |
| poppler/SignatureInfo.cc |
| poppler/Stream.cc |
| poppler/StructTreeRoot.cc |
| poppler/StructElement.cc |
| poppler/UnicodeMap.cc |
| poppler/UnicodeMapFuncs.cc |
| poppler/UnicodeTypeTable.cc |
| poppler/UTF.cc |
| poppler/XRef.cc |
| poppler/PSOutputDev.cc |
| poppler/TextOutputDev.cc |
| poppler/PageLabelInfo.cc |
| poppler/SecurityHandler.cc |
| poppler/Sound.cc |
| poppler/ViewerPreferences.cc |
| poppler/Movie.cc |
| poppler/Rendition.cc |
| poppler/CertificateInfo.cc |
| poppler/BBoxOutputDev.cc |
| poppler/SplashOutputDev.cc |
| splash/Splash.cc |
| splash/SplashBitmap.cc |
| splash/SplashClip.cc |
| splash/SplashFTFont.cc |
| splash/SplashFTFontEngine.cc |
| splash/SplashFTFontFile.cc |
| splash/SplashFont.cc |
| splash/SplashFontEngine.cc |
| splash/SplashFontFile.cc |
| splash/SplashFontFileID.cc |
| splash/SplashPath.cc |
| splash/SplashPattern.cc |
| splash/SplashScreen.cc |
| splash/SplashState.cc |
| splash/SplashXPath.cc |
| splash/SplashXPathScanner.cc |
| ) |
| set(poppler_LIBS Freetype::Freetype ZLIB::ZLIB) |
| if(FONTCONFIG_FOUND) |
| set(poppler_LIBS ${poppler_LIBS} Fontconfig::Fontconfig) |
| endif() |
| |
| if(Androidlib) |
| set(poppler_LIBS ${poppler_LIBS} ${Androidlib}) |
| endif() |
| |
| if(JPEG_FOUND) |
| set(poppler_SRCS ${poppler_SRCS} |
| poppler/DCTStream.cc |
| ) |
| set(poppler_LIBS ${poppler_LIBS} JPEG::JPEG) |
| endif() |
| if(ENABLE_ZLIB_UNCOMPRESS) |
| set(poppler_SRCS ${poppler_SRCS} |
| poppler/FlateStream.cc |
| ) |
| endif() |
| if(ENABLE_LIBCURL) |
| set(poppler_SRCS ${poppler_SRCS} |
| poppler/CurlCachedFile.cc |
| poppler/CurlPDFDocBuilder.cc |
| ) |
| set(poppler_LIBS ${poppler_LIBS} CURL::libcurl) |
| endif() |
| if (ENABLE_NSS3) |
| set(poppler_SRCS ${poppler_SRCS} |
| poppler/NSSCryptoSignBackend.cc |
| ) |
| set(poppler_LIBS ${poppler_LIBS} PkgConfig::NSS3) |
| endif() |
| if (ENABLE_GPGME) |
| set(poppler_SRCS ${poppler_SRCS} |
| poppler/GPGMECryptoSignBackend.cc |
| ) |
| set(poppler_LIBS ${poppler_LIBS} Gpgmepp) |
| endif() |
| if (OpenJPEG_FOUND) |
| set(poppler_SRCS ${poppler_SRCS} |
| poppler/JPEG2000Stream.cc |
| ) |
| set(poppler_LIBS ${poppler_LIBS} openjp2) |
| else () |
| set(poppler_SRCS ${poppler_SRCS} |
| poppler/JPXStream.cc |
| ) |
| endif() |
| if(USE_CMS) |
| set(poppler_LIBS ${poppler_LIBS} ${LCMS2_LIBRARIES}) |
| endif() |
| if(WIN32) |
| # use clean APIs |
| add_definitions(-DWIN32_LEAN_AND_MEAN) |
| # gdi32 is needed under win32 |
| set(poppler_LIBS ${poppler_LIBS} gdi32) |
| endif() |
| if(PNG_FOUND) |
| set(poppler_LIBS ${poppler_LIBS} PNG::PNG) |
| endif() |
| if(ENABLE_LIBTIFF) |
| set(poppler_LIBS ${poppler_LIBS} TIFF::TIFF) |
| endif() |
| if(Boost_FOUND) |
| set(poppler_LIBS ${poppler_LIBS} Boost::boost) |
| endif() |
| |
| if (GPERF AND SED AND RUN_GPERF_IF_PRESENT) |
| macro(ADD_GPERF_FILE input) |
| add_custom_command(OUTPUT poppler/${input}.c |
| COMMAND ${GPERF} poppler/${input}.gperf > ${CMAKE_CURRENT_BINARY_DIR}/poppler/${input}.c |
| COMMAND ${GPERF} poppler/${input}.gperf > ${CMAKE_CURRENT_SOURCE_DIR}/poppler/${input}.pregenerated.c |
| COMMAND ${SED} -i -e "s#${GPERF}#gperf#" ${CMAKE_CURRENT_SOURCE_DIR}/poppler/${input}.pregenerated.c |
| COMMAND clang-format -i ${CMAKE_CURRENT_SOURCE_DIR}/poppler/${input}.pregenerated.c || true |
| DEPENDS poppler/${input}.gperf |
| WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}) |
| |
| set(poppler_SRCS ${poppler_SRCS} |
| poppler/${input}.c |
| ) |
| endmacro() |
| else() |
| macro(ADD_GPERF_FILE input) |
| set(poppler_SRCS ${poppler_SRCS} |
| poppler/${input}.pregenerated.c |
| ) |
| endmacro() |
| endif() |
| |
| ADD_GPERF_FILE(CourierWidths) |
| ADD_GPERF_FILE(CourierBoldWidths) |
| ADD_GPERF_FILE(CourierBoldObliqueWidths) |
| ADD_GPERF_FILE(CourierObliqueWidths) |
| ADD_GPERF_FILE(HelveticaWidths) |
| ADD_GPERF_FILE(HelveticaBoldWidths) |
| ADD_GPERF_FILE(HelveticaBoldObliqueWidths) |
| ADD_GPERF_FILE(HelveticaObliqueWidths) |
| ADD_GPERF_FILE(SymbolWidths) |
| ADD_GPERF_FILE(TimesBoldWidths) |
| ADD_GPERF_FILE(TimesBoldItalicWidths) |
| ADD_GPERF_FILE(TimesItalicWidths) |
| ADD_GPERF_FILE(TimesRomanWidths) |
| ADD_GPERF_FILE(ZapfDingbatsWidths) |
| |
| set(POPPLER_SOVERSION_NUMBER "136") |
| |
| set(LINKER_SCRIPT "${CMAKE_BINARY_DIR}/libpoppler.map") |
| configure_file( |
| "${CMAKE_SOURCE_DIR}/poppler/libpoppler.map.in" |
| ${LINKER_SCRIPT}) |
| |
| if(MSVC) |
| add_definitions(-D_CRT_SECURE_NO_WARNINGS) |
| endif() |
| add_library(poppler ${poppler_SRCS} ${LINKER_SCRIPT}) |
| if (OpenJPEG_FOUND) |
| # check if we can remove this when we depend on newer openjpeg versions, 2.5 seems fixed |
| # target openjp2 may lack interface include directories |
| target_include_directories(poppler SYSTEM PRIVATE ${OPENJPEG_INCLUDE_DIRS}) |
| endif() |
| if(USE_CMS) |
| target_include_directories(poppler SYSTEM PRIVATE ${LCMS2_INCLUDE_DIR}) |
| endif() |
| generate_export_header(poppler BASE_NAME poppler-private EXPORT_FILE_NAME "${CMAKE_CURRENT_BINARY_DIR}/poppler_private_export.h") |
| set_target_properties(poppler PROPERTIES |
| VERSION ${POPPLER_SOVERSION_NUMBER}.0.0 |
| SOVERSION ${POPPLER_SOVERSION_NUMBER}) |
| |
| if(UNIX AND (NOT APPLE)) |
| file(WRITE ${CMAKE_CURRENT_BINARY_DIR}/linkerscript_test.map "VERS_1 {\nglobal:\n *;};\n") |
| |
| # once we require cmake 3.18, |
| # the next set of lines can be changed |
| # to the check_linker_flags function instead |
| include(CheckCXXSourceCompiles) |
| set(OLD_CMAKE_REQUIRED_FLAGS ${CMAKE_REQUIRED_FLAGS}) |
| set(CMAKE_REQUIRED_FLAGS ${CMAKE_REQUIRED_FLAGS} -Wl,--version-script=${CMAKE_CURRENT_BINARY_DIR}/linkerscript_test.map) |
| check_cxx_source_compiles(" |
| int main(int, char**) { |
| return 0; |
| } |
| " SUPPORT_VERSION_SCRIPT) |
| set(CMAKE_REQUIRED_FLAGS ${OLD_CMAKE_REQUIRED_FLAGS}) |
| |
| file(REMOVE ${CMAKE_CURRENT_BINARY_DIR}/linkerscript_test.map) |
| if (SUPPORT_VERSION_SCRIPT) |
| set_target_properties(poppler PROPERTIES LINK_OPTIONS LINKER:--version-script=${LINKER_SCRIPT}) |
| endif() |
| endif() |
| if(MINGW AND BUILD_SHARED_LIBS) |
| get_target_property(POPPLER_SOVERSION poppler SOVERSION) |
| set_target_properties(poppler PROPERTIES SUFFIX "-${POPPLER_SOVERSION}${CMAKE_SHARED_LIBRARY_SUFFIX}") |
| endif() |
| target_link_libraries(poppler LINK_PRIVATE ${poppler_LIBS}) |
| install(TARGETS poppler RUNTIME DESTINATION bin LIBRARY DESTINATION ${CMAKE_INSTALL_LIBDIR} ARCHIVE DESTINATION ${CMAKE_INSTALL_LIBDIR}) |
| |
| if(ENABLE_UNSTABLE_API_ABI_HEADERS) |
| install(FILES |
| poppler/Annot.h |
| poppler/AnnotStampImageHelper.h |
| poppler/Array.h |
| poppler/CachedFile.h |
| poppler/Catalog.h |
| poppler/CharCodeToUnicode.h |
| poppler/CMap.h |
| poppler/DateInfo.h |
| poppler/Decrypt.h |
| poppler/Dict.h |
| poppler/Error.h |
| poppler/FDPDFDocBuilder.h |
| poppler/FILECacheLoader.h |
| poppler/FileSpec.h |
| poppler/FontEncodingTables.h |
| poppler/FontInfo.h |
| poppler/Form.h |
| poppler/Function.h |
| poppler/Gfx.h |
| poppler/GfxFont.h |
| poppler/GfxState.h |
| poppler/GfxState_helpers.h |
| poppler/GlobalParams.h |
| poppler/Hints.h |
| poppler/HashAlgorithm.h |
| poppler/JArithmeticDecoder.h |
| poppler/JBIG2Stream.h |
| poppler/JSInfo.h |
| poppler/Lexer.h |
| poppler/Link.h |
| poppler/Linearization.h |
| poppler/LocalPDFDocBuilder.h |
| poppler/MarkedContentOutputDev.h |
| poppler/Movie.h |
| poppler/NameToCharCode.h |
| poppler/Object.h |
| poppler/OptionalContent.h |
| poppler/Outline.h |
| poppler/OutputDev.h |
| poppler/Page.h |
| poppler/PageTransition.h |
| poppler/Parser.h |
| poppler/PDFDoc.h |
| poppler/PDFDocBuilder.h |
| poppler/PDFDocEncoding.h |
| poppler/PDFDocFactory.h |
| poppler/PopplerCache.h |
| poppler/ProfileData.h |
| poppler/PreScanOutputDev.h |
| poppler/PSTokenizer.h |
| poppler/Rendition.h |
| poppler/CertificateInfo.h |
| poppler/SignatureInfo.h |
| poppler/Stream-CCITT.h |
| poppler/Stream.h |
| poppler/StructElement.h |
| poppler/StructTreeRoot.h |
| poppler/UnicodeMap.h |
| poppler/UnicodeMapFuncs.h |
| poppler/UnicodeMapTables.h |
| poppler/UnicodeTypeTable.h |
| poppler/UnicodeCClassTables.h |
| poppler/UnicodeCompTables.h |
| poppler/UnicodeDecompTables.h |
| poppler/ViewerPreferences.h |
| poppler/XRef.h |
| poppler/CharTypes.h |
| poppler/ErrorCodes.h |
| poppler/NameToUnicodeTable.h |
| poppler/PSOutputDev.h |
| poppler/TextOutputDev.h |
| poppler/SecurityHandler.h |
| poppler/BBoxOutputDev.h |
| poppler/UTF.h |
| poppler/Sound.h |
| ${CMAKE_CURRENT_BINARY_DIR}/poppler_private_export.h |
| ${CMAKE_CURRENT_BINARY_DIR}/poppler/poppler-config.h |
| poppler/SplashOutputDev.h |
| DESTINATION include/poppler) |
| install(FILES |
| goo/GooTimer.h |
| goo/GooString.h |
| goo/gmem.h |
| goo/gdir.h |
| goo/gfile.h |
| goo/ImgWriter.h |
| goo/GooCheckedOps.h |
| goo/GooLikely.h |
| goo/gstrtod.h |
| goo/grandom.h |
| DESTINATION include/poppler/goo) |
| if(PNG_FOUND) |
| install(FILES |
| goo/PNGWriter.h |
| DESTINATION include/poppler/goo) |
| endif() |
| if(ENABLE_LIBTIFF) |
| install(FILES |
| goo/TiffWriter.h |
| DESTINATION include/poppler/goo) |
| endif() |
| if(JPEG_FOUND) |
| install(FILES |
| goo/JpegWriter.h |
| DESTINATION include/poppler/goo) |
| endif() |
| install(FILES |
| fofi/FoFiBase.h |
| fofi/FoFiEncodings.h |
| fofi/FoFiTrueType.h |
| fofi/FoFiType1.h |
| fofi/FoFiType1C.h |
| fofi/FoFiIdentifier.h |
| DESTINATION include/poppler/fofi) |
| if(ENABLE_LIBCURL) |
| install(FILES |
| poppler/CurlCachedFile.h |
| poppler/CurlPDFDocBuilder.h |
| DESTINATION include/poppler) |
| endif() |
| if(OpenJPEG_FOUND) |
| install(FILES |
| poppler/JPEG2000Stream.h |
| DESTINATION include/poppler) |
| else() |
| install(FILES |
| poppler/JPXStream.h |
| DESTINATION include/poppler) |
| endif() |
| install(FILES |
| splash/Splash.h |
| splash/SplashBitmap.h |
| splash/SplashClip.h |
| splash/SplashErrorCodes.h |
| splash/SplashFTFont.h |
| splash/SplashFTFontEngine.h |
| splash/SplashFTFontFile.h |
| splash/SplashFont.h |
| splash/SplashFontEngine.h |
| splash/SplashFontFile.h |
| splash/SplashFontFileID.h |
| splash/SplashGlyphBitmap.h |
| splash/SplashMath.h |
| splash/SplashPath.h |
| splash/SplashPattern.h |
| splash/SplashScreen.h |
| splash/SplashState.h |
| splash/SplashTypes.h |
| splash/SplashXPath.h |
| splash/SplashXPathScanner.h |
| DESTINATION include/poppler/splash) |
| if(CAIRO_FOUND) |
| install(FILES |
| poppler/CairoFontEngine.h |
| poppler/CairoOutputDev.h |
| poppler/CairoRescaleBox.h |
| DESTINATION include/poppler) |
| endif() |
| endif() |
| |
| |
| if(ENABLE_UTILS) |
| add_subdirectory(utils) |
| endif() |
| if(ENABLE_GLIB) |
| add_subdirectory(glib) |
| endif() |
| if (BUILD_MANUAL_TESTS) |
| add_subdirectory(test) |
| endif() |
| if(ENABLE_QT5) |
| add_subdirectory(qt5) |
| endif() |
| if(ENABLE_QT6) |
| add_subdirectory(qt6) |
| endif() |
| if(ENABLE_CPP) |
| add_subdirectory(cpp) |
| endif() |
| |
| # Configure "Requires" field & install .pc files for packagers |
| set(PC_REQUIRES "") |
| set(PC_REQUIRES_PRIVATE "Requires.private: poppler = ${POPPLER_VERSION}") |
| |
| if(PKG_CONFIG_EXECUTABLE) |
| poppler_create_install_pkgconfig(poppler.pc ${CMAKE_INSTALL_LIBDIR}/pkgconfig) |
| if(ENABLE_QT5) |
| poppler_create_install_pkgconfig(poppler-qt5.pc ${CMAKE_INSTALL_LIBDIR}/pkgconfig) |
| endif() |
| if(ENABLE_QT6) |
| poppler_create_install_pkgconfig(poppler-qt6.pc ${CMAKE_INSTALL_LIBDIR}/pkgconfig) |
| endif() |
| if(ENABLE_GLIB) |
| poppler_create_install_pkgconfig(poppler-glib.pc ${CMAKE_INSTALL_LIBDIR}/pkgconfig) |
| endif() |
| if(ENABLE_CPP) |
| poppler_create_install_pkgconfig(poppler-cpp.pc ${CMAKE_INSTALL_LIBDIR}/pkgconfig) |
| endif() |
| else() |
| MESSAGE(STATUS ".pc files will not be installed becasue of missing 'pkg-config'!") |
| endif() |
| |
| # Summarize build options & display warnings for user |
| message("Building Poppler with support for:") |
| show_end_message("font configuration" ${font_configuration}) |
| show_end_message_yesno("use boost (Splash)" ENABLE_BOOST) |
| show_end_message_yesno("cairo output" CAIRO_FOUND) |
| show_end_message_yesno("qt5 wrapper" ENABLE_QT5) |
| show_end_message_yesno("qt6 wrapper" ENABLE_QT6) |
| show_end_message_yesno("glib wrapper" ENABLE_GLIB) |
| show_end_message_yesno(" introspection" INTROSPECTION_FOUND) |
| show_end_message_yesno(" gtk-doc" ENABLE_GTK_DOC) |
| show_end_message_yesno("cpp wrapper" ENABLE_CPP) |
| show_end_message_yesno("use libjpeg" ENABLE_LIBJPEG) |
| show_end_message_yesno("use libpng" ENABLE_LIBPNG) |
| show_end_message_yesno("use libtiff" ENABLE_LIBTIFF) |
| show_end_message_yesno("use zlib uncompress" ENABLE_ZLIB_UNCOMPRESS) |
| show_end_message_yesno("use nss3" ENABLE_NSS3) |
| show_end_message_yesno("use gpg" ENABLE_GPGME) |
| show_end_message(" default signature backend" ${DEFAULT_SIGNATURE_BACKEND}) |
| show_end_message_yesno("use curl" ENABLE_LIBCURL) |
| show_end_message_yesno("use libopenjpeg2" WITH_OPENJPEG) |
| show_end_message_yesno("use lcms2" USE_CMS) |
| show_end_message_yesno("command line utils" ENABLE_UTILS) |
| show_end_message_yesno("fuzz target" ENABLE_FUZZER) |
| show_end_message("test data dir" ${TESTDATADIR}) |
| |
| if(NOT ENABLE_LIBJPEG AND HAVE_DCT_DECODER) |
| message("Warning: Using libjpeg is recommended. The internal DCT decoder is unmaintained.") |
| endif() |
| |
| if(NOT HAVE_DCT_DECODER) |
| message("Warning: You're not compiling any DCT decoder. Some files will fail to display properly.") |
| endif() |
| |
| if(ENABLE_ZLIB_UNCOMPRESS) |
| message("Warning: Using zlib is not totally safe") |
| endif() |
| |
| if(NOT WITH_OPENJPEG AND HAVE_JPX_DECODER) |
| message("Warning: Using libopenjpeg2 is recommended. The internal JPX decoder is unmaintained.") |
| endif() |
| |
| if(NOT HAVE_JPX_DECODER) |
| message("Warning: You're not compiling any JPX decoder. Some files will fail to display properly.") |
| endif() |
| |
| if(NOT ENABLE_BOOST) |
| message("Warning: Use of boost is recommended for better performance.") |
| endif() |
| |
| set(ARCHIVE_NAME ${CMAKE_PROJECT_NAME}-${POPPLER_VERSION}) |
| add_custom_target(dist |
| COMMAND |
| COMMAND git log --stat | fmt --split-only > ${CMAKE_BINARY_DIR}/ChangeLog |
| COMMAND git archive --prefix=${ARCHIVE_NAME}/ HEAD > ${CMAKE_BINARY_DIR}/${ARCHIVE_NAME}.tar |
| COMMAND tar -C ${CMAKE_BINARY_DIR} -rf ${CMAKE_BINARY_DIR}/${ARCHIVE_NAME}.tar ChangeLog --transform='s,,${ARCHIVE_NAME}/,' --owner root:0 --group root:0 |
| COMMAND tar -C ${CMAKE_BINARY_DIR} -rf ${CMAKE_BINARY_DIR}/${ARCHIVE_NAME}.tar glib/reference/html --transform='s,,${ARCHIVE_NAME}/,' --owner root:0 --group root:0 |
| COMMAND xz -9 ${CMAKE_BINARY_DIR}/${ARCHIVE_NAME}.tar |
| WORKING_DIRECTORY ${CMAKE_SOURCE_DIR}) |
