
/* png.c - location for general purpose libpng functions
 *
 * Last changed in libpng 1.6.0 [(PENDING RELEASE)]
 * Copyright (c) 1998-2012 Glenn Randers-Pehrson
 * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)
 * (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.)
 *
 * This code is released under the libpng license.
 * For conditions of distribution and use, see the disclaimer
 * and license in png.h
 */

#include "pngpriv.h"

/* Generate a compiler error if there is an old png.h in the search path. */
typedef png_libpng_version_1_6_0beta30 Your_png_h_is_not_version_1_6_0beta30;

/* Tells libpng that we have already handled the first "num_bytes" bytes
 * of the PNG file signature.  If the PNG data is embedded into another
 * stream we can set num_bytes = 8 so that libpng will not attempt to read
 * or write any of the magic bytes before it starts on the IHDR.
 */

#ifdef PNG_READ_SUPPORTED
void PNGAPI
png_set_sig_bytes(png_structrp png_ptr, int num_bytes)
{
   png_debug(1, "in png_set_sig_bytes");

   if (png_ptr == NULL)
      return;

   if (num_bytes > 8)
      png_error(png_ptr, "Too many bytes for PNG signature");

   png_ptr->sig_bytes = (png_byte)(num_bytes < 0 ? 0 : num_bytes);
}

/* Checks whether the supplied bytes match the PNG signature.  We allow
 * checking less than the full 8-byte signature so that those apps that
 * already read the first few bytes of a file to determine the file type
 * can simply check the remaining bytes for extra assurance.  Returns
 * an integer less than, equal to, or greater than zero if sig is found,
 * respectively, to be less than, to match, or be greater than the correct
 * PNG signature (this is the same behavior as strcmp, memcmp, etc).
 */
int PNGAPI
png_sig_cmp(png_const_bytep sig, png_size_t start, png_size_t num_to_check)
{
   png_byte png_signature[8] = {137, 80, 78, 71, 13, 10, 26, 10};

   if (num_to_check > 8)
      num_to_check = 8;

   else if (num_to_check < 1)
      return (-1);

   if (start > 7)
      return (-1);

   if (start + num_to_check > 8)
      num_to_check = 8 - start;

   return ((int)(memcmp(&sig[start], &png_signature[start], num_to_check)));
}

#endif /* PNG_READ_SUPPORTED */

#if defined(PNG_READ_SUPPORTED) || defined(PNG_WRITE_SUPPORTED)
/* Function to allocate memory for zlib */
PNG_FUNCTION(voidpf /* PRIVATE */,
png_zalloc,(voidpf png_ptr, uInt items, uInt size),PNG_ALLOCATED)
{
   png_alloc_size_t num_bytes = size;

   if (png_ptr == NULL)
      return NULL;

   if (items >= (~(png_alloc_size_t)0)/size)
   {
      png_warning (png_voidcast(png_structrp, png_ptr),
         "Potential overflow in png_zalloc()");
      return NULL;
   }

   num_bytes *= items;
   return png_malloc_warn(png_voidcast(png_structrp, png_ptr), num_bytes);
}

/* Function to free memory for zlib */
void /* PRIVATE */
png_zfree(voidpf png_ptr, voidpf ptr)
{
   png_free(png_voidcast(png_const_structrp,png_ptr), ptr);
}

/* Reset the CRC variable to 32 bits of 1's.  Care must be taken
 * in case CRC is > 32 bits to leave the top bits 0.
 */
void /* PRIVATE */
png_reset_crc(png_structrp png_ptr)
{
   /* The cast is safe because the crc is a 32 bit value. */
   png_ptr->crc = (png_uint_32)crc32(0, Z_NULL, 0);
}

/* Calculate the CRC over a section of data.  We can only pass as
 * much data to this routine as the largest single buffer size.  We
 * also check that this data will actually be used before going to the
 * trouble of calculating it.
 */
void /* PRIVATE */
png_calculate_crc(png_structrp png_ptr, png_const_bytep ptr, png_size_t length)
{
   int need_crc = 1;

   if (PNG_CHUNK_ANCILLIARY(png_ptr->chunk_name))
   {
      if ((png_ptr->flags & PNG_FLAG_CRC_ANCILLARY_MASK) ==
          (PNG_FLAG_CRC_ANCILLARY_USE | PNG_FLAG_CRC_ANCILLARY_NOWARN))
         need_crc = 0;
   }

   else /* critical */
   {
      if (png_ptr->flags & PNG_FLAG_CRC_CRITICAL_IGNORE)
         need_crc = 0;
   }

   /* 'uLong' is defined as unsigned long, this means that on some systems it is
    * a 64 bit value.  crc32, however, returns 32 bits so the following cast is
    * safe.  'uInt' may be no more than 16 bits, so it is necessary to perform a
    * loop here.
    */
   if (need_crc && length > 0)
   {
      uLong crc = png_ptr->crc; /* Should never issue a warning */

      do
      {
         uInt safe_length = (uInt)length;
         if (safe_length == 0)
            safe_length = (uInt)-1; /* evil, but safe */

         crc = crc32(crc, ptr, safe_length);

         /* The following should never issue compiler warnings, if they do the
          * target system has characteristics that will probably violate other
          * assumptions within the libpng code.
          */
         ptr += safe_length;
         length -= safe_length;
      }
      while (length > 0);

      /* And the following is always safe because the crc is only 32 bits. */
      png_ptr->crc = (png_uint_32)crc;
   }
}

/* Check a user supplied version number, called from both read and write
 * functions that create a png_struct
 */
int
png_user_version_check(png_structrp png_ptr, png_const_charp user_png_ver)
{
   if (user_png_ver)
   {
      int i = 0;

      do
      {
         if (user_png_ver[i] != png_libpng_ver[i])
            png_ptr->flags |= PNG_FLAG_LIBRARY_MISMATCH;
      } while (png_libpng_ver[i++]);
   }

   else
      png_ptr->flags |= PNG_FLAG_LIBRARY_MISMATCH;

   if (png_ptr->flags & PNG_FLAG_LIBRARY_MISMATCH)
   {
     /* Libpng 0.90 and later are binary incompatible with libpng 0.89, so
      * we must recompile any applications that use any older library version.
      * For versions after libpng 1.0, we will be compatible, so we need
      * only check the first digit.
      */
      if (user_png_ver == NULL || user_png_ver[0] != png_libpng_ver[0] ||
          (user_png_ver[0] == '1' && user_png_ver[2] != png_libpng_ver[2]) ||
          (user_png_ver[0] == '0' && user_png_ver[2] < '9'))
      {
#ifdef PNG_WARNINGS_SUPPORTED
         size_t pos = 0;
         char m[128];

         pos = png_safecat(m, (sizeof m), pos,
             "Application built with libpng-");
         pos = png_safecat(m, (sizeof m), pos, user_png_ver);
         pos = png_safecat(m, (sizeof m), pos, " but running with ");
         pos = png_safecat(m, (sizeof m), pos, png_libpng_ver);

         png_warning(png_ptr, m);
#endif

#ifdef PNG_ERROR_NUMBERS_SUPPORTED
         png_ptr->flags = 0;
#endif

         return 0;
      }
   }

   /* Success return. */
   return 1;
}

/* Generic function to create a png_struct for either read or write - this
 * contains the common initialization.
 */
PNG_FUNCTION(png_structp /* PRIVATE */,
png_create_png_struct,(png_const_charp user_png_ver, png_voidp error_ptr,
    png_error_ptr error_fn, png_error_ptr warn_fn, png_voidp mem_ptr,
    png_malloc_ptr malloc_fn, png_free_ptr free_fn),PNG_ALLOCATED)
{
   png_struct create_struct;
#  ifdef PNG_SETJMP_SUPPORTED
      jmp_buf create_jmp_buf;
#  endif

   /* This temporary stack-allocated structure is used to provide a place to
    * build enough context to allow the user provided memory allocator (if any)
    * to be called.
    */
   memset(&create_struct, 0, (sizeof create_struct));

   /* Added at libpng-1.2.6 */
#  ifdef PNG_USER_LIMITS_SUPPORTED
      create_struct.user_width_max = PNG_USER_WIDTH_MAX;
      create_struct.user_height_max = PNG_USER_HEIGHT_MAX;

#     ifdef PNG_USER_CHUNK_CACHE_MAX
         /* Added at libpng-1.2.43 and 1.4.0 */
         create_struct.user_chunk_cache_max = PNG_USER_CHUNK_CACHE_MAX;
#     endif

#     ifdef PNG_SET_USER_CHUNK_MALLOC_MAX
         /* Added at libpng-1.2.43 and 1.4.1, required only for read but exists
          * in png_struct regardless.
          */
         create_struct.user_chunk_malloc_max = PNG_USER_CHUNK_MALLOC_MAX;
#     endif
#  endif

   /* The following two API calls simply set fields in png_struct, so it is safe
    * to do them now even though error handling is not yet set up.
    */
#  ifdef PNG_USER_MEM_SUPPORTED
      png_set_mem_fn(&create_struct, mem_ptr, malloc_fn, free_fn);
#  endif

   /* (*error_fn) can return control to the caller after the error_ptr is set,
    * this will result in a memory leak unless the error_fn does something
    * extremely sophisticated.  The design lacks merit but is implicit in the
    * API.
    */
   png_set_error_fn(&create_struct, error_ptr, error_fn, warn_fn);

#  ifdef PNG_SETJMP_SUPPORTED
      if (!setjmp(create_jmp_buf))
      {
         /* Temporarily fake out the longjmp information until we have
          * successfully completed this function.  This only works if we have
          * setjmp() support compiled in, but it is safe - this stuff should
          * never happen.
          */
         create_struct.jmp_buf_ptr = &create_jmp_buf;
         create_struct.jmp_buf_size = 0; /*stack allocation*/
         create_struct.longjmp_fn = longjmp;
#  else
      {
#  endif
         /* Call the general version checker (shared with read and write code):
          */
         if (png_user_version_check(&create_struct, user_png_ver))
         {
            png_structrp png_ptr = png_voidcast(png_structrp,
               png_malloc_warn(&create_struct, (sizeof *png_ptr)));

            if (png_ptr != NULL)
            {
               /* png_ptr->zstream holds a back-pointer to the png_struct, so
                * this can only be done now:
                */
               create_struct.zstream.zalloc = png_zalloc;
               create_struct.zstream.zfree = png_zfree;
               create_struct.zstream.opaque = png_ptr;

#              ifdef PNG_SETJMP_SUPPORTED
                  /* Eliminate the local error handling: */
                  create_struct.jmp_buf_ptr = NULL;
                  create_struct.jmp_buf_size = 0;
                  create_struct.longjmp_fn = 0;
#              endif

               *png_ptr = create_struct;

               /* This is the successful return point */
               return png_ptr;
            }
         }
      }

   /* A longjmp because of a bug in the application storage allocator or a
    * simple failure to allocate the png_struct.
    */
   return NULL;
}

/* Allocate the memory for an info_struct for the application. */
PNG_FUNCTION(png_infop,PNGAPI
png_create_info_struct,(png_const_structrp png_ptr),PNG_ALLOCATED)
{
   png_inforp info_ptr;

   png_debug(1, "in png_create_info_struct");

   if (png_ptr == NULL)
      return NULL;

   /* Use the internal API that does not (or at least should not) error out, so
    * that this call always returns ok.  The application typically sets up the
    * error handling *after* creating the info_struct because this is the way it
    * has always been done in 'example.c'.
    */
   info_ptr = png_voidcast(png_inforp, png_malloc_base(png_ptr,
      (sizeof *info_ptr)));

   if (info_ptr != NULL)
      memset(info_ptr, 0, (sizeof *info_ptr));

   return info_ptr;
}

/* This function frees the memory associated with a single info struct.
 * Normally, one would use either png_destroy_read_struct() or
 * png_destroy_write_struct() to free an info struct, but this may be
 * useful for some applications.  From libpng 1.6.0 this function is also used
 * internally to implement the png_info release part of the 'struct' destroy
 * APIs.  This ensures that all possible approaches free the same data (all of
 * it).
 */
void PNGAPI
png_destroy_info_struct(png_const_structrp png_ptr, png_infopp info_ptr_ptr)
{
   png_inforp info_ptr = NULL;

   png_debug(1, "in png_destroy_info_struct");

   if (png_ptr == NULL)
      return;

   if (info_ptr_ptr != NULL)
      info_ptr = *info_ptr_ptr;

   if (info_ptr != NULL)
   {
      /* Do this first in case of an error below; if the app implements its own
       * memory management this can lead to png_free calling png_error, which
       * will abort this routine and return control to the app error handler.
       * An infinite loop may result if it then tries to free the same info
       * ptr.
       */
      *info_ptr_ptr = NULL;

      png_free_data(png_ptr, info_ptr, PNG_FREE_ALL, -1);
      memset(info_ptr, 0, (sizeof *info_ptr));
      png_free(png_ptr, info_ptr);
   }
}

/* Initialize the info structure.  This is now an internal function (0.89)
 * and applications using it are urged to use png_create_info_struct()
 * instead.  Use deprecated in 1.6.0, internal use removed (used internally it
 * is just a memset).
 *
 * NOTE: it is almost inconceivable that this API is used because it bypasses
 * the user-memory mechanism and the user error handling/warning mechanisms in
 * those cases where it does anything other than a memset.
 */
PNG_FUNCTION(void,PNGAPI
png_info_init_3,(png_infopp ptr_ptr, png_size_t png_info_struct_size),
   PNG_DEPRECATED)
{
   png_inforp info_ptr = *ptr_ptr;

   png_debug(1, "in png_info_init_3");

   if (info_ptr == NULL)
      return;

   if ((sizeof (png_info)) > png_info_struct_size)
   {
      *ptr_ptr = NULL;
      /* The following line is why this API should not be used: */
      free(info_ptr);
      info_ptr = png_voidcast(png_inforp, png_malloc_base(NULL,
         (sizeof *info_ptr)));
      *ptr_ptr = info_ptr;
   }

   /* Set everything to 0 */
   memset(info_ptr, 0, (sizeof *info_ptr));
}

/* The following API is not called internally */
void PNGAPI
png_data_freer(png_const_structrp png_ptr, png_inforp info_ptr,
   int freer, png_uint_32 mask)
{
   png_debug(1, "in png_data_freer");

   if (png_ptr == NULL || info_ptr == NULL)
      return;

   if (freer == PNG_DESTROY_WILL_FREE_DATA)
      info_ptr->free_me |= mask;

   else if (freer == PNG_USER_WILL_FREE_DATA)
      info_ptr->free_me &= ~mask;

   else
      png_error(png_ptr, "Unknown freer parameter in png_data_freer");
}

void PNGAPI
png_free_data(png_const_structrp png_ptr, png_inforp info_ptr, png_uint_32 mask,
   int num)
{
   png_debug(1, "in png_free_data");

   if (png_ptr == NULL || info_ptr == NULL)
      return;

#ifdef PNG_TEXT_SUPPORTED
   /* Free text item num or (if num == -1) all text items */
   if ((mask & PNG_FREE_TEXT) & info_ptr->free_me)
   {
      if (num != -1)
      {
         if (info_ptr->text && info_ptr->text[num].key)
         {
            png_free(png_ptr, info_ptr->text[num].key);
            info_ptr->text[num].key = NULL;
         }
      }

      else
      {
         int i;
         for (i = 0; i < info_ptr->num_text; i++)
             png_free_data(png_ptr, info_ptr, PNG_FREE_TEXT, i);
         png_free(png_ptr, info_ptr->text);
         info_ptr->text = NULL;
         info_ptr->num_text=0;
      }
   }
#endif

#ifdef PNG_tRNS_SUPPORTED
   /* Free any tRNS entry */
   if ((mask & PNG_FREE_TRNS) & info_ptr->free_me)
   {
      png_free(png_ptr, info_ptr->trans_alpha);
      info_ptr->trans_alpha = NULL;
      info_ptr->valid &= ~PNG_INFO_tRNS;
   }
#endif

#ifdef PNG_sCAL_SUPPORTED
   /* Free any sCAL entry */
   if ((mask & PNG_FREE_SCAL) & info_ptr->free_me)
   {
      png_free(png_ptr, info_ptr->scal_s_width);
      png_free(png_ptr, info_ptr->scal_s_height);
      info_ptr->scal_s_width = NULL;
      info_ptr->scal_s_height = NULL;
      info_ptr->valid &= ~PNG_INFO_sCAL;
   }
#endif

#ifdef PNG_pCAL_SUPPORTED
   /* Free any pCAL entry */
   if ((mask & PNG_FREE_PCAL) & info_ptr->free_me)
   {
      png_free(png_ptr, info_ptr->pcal_purpose);
      png_free(png_ptr, info_ptr->pcal_units);
      info_ptr->pcal_purpose = NULL;
      info_ptr->pcal_units = NULL;
      if (info_ptr->pcal_params != NULL)
         {
            unsigned int i;
            for (i = 0; i < info_ptr->pcal_nparams; i++)
            {
               png_free(png_ptr, info_ptr->pcal_params[i]);
               info_ptr->pcal_params[i] = NULL;
            }
            png_free(png_ptr, info_ptr->pcal_params);
            info_ptr->pcal_params = NULL;
         }
      info_ptr->valid &= ~PNG_INFO_pCAL;
   }
#endif

#ifdef PNG_iCCP_SUPPORTED
   /* Free any profile entry */
   if ((mask & PNG_FREE_ICCP) & info_ptr->free_me)
   {
      png_free(png_ptr, info_ptr->iccp_name);
      png_free(png_ptr, info_ptr->iccp_profile);
      info_ptr->iccp_name = NULL;
      info_ptr->iccp_profile = NULL;
      info_ptr->valid &= ~PNG_INFO_iCCP;
   }
#endif

#ifdef PNG_sPLT_SUPPORTED
   /* Free a given sPLT entry, or (if num == -1) all sPLT entries */
   if ((mask & PNG_FREE_SPLT) & info_ptr->free_me)
   {
      if (num != -1)
      {
         if (info_ptr->splt_palettes)
         {
            png_free(png_ptr, info_ptr->splt_palettes[num].name);
            png_free(png_ptr, info_ptr->splt_palettes[num].entries);
            info_ptr->splt_palettes[num].name = NULL;
            info_ptr->splt_palettes[num].entries = NULL;
         }
      }

      else
      {
         if (info_ptr->splt_palettes_num)
         {
            unsigned int i;
            for (i = 0; i < info_ptr->splt_palettes_num; i++)
               png_free_data(png_ptr, info_ptr, PNG_FREE_SPLT, (int)i);

            png_free(png_ptr, info_ptr->splt_palettes);
            info_ptr->splt_palettes = NULL;
            info_ptr->splt_palettes_num = 0;
         }
         info_ptr->valid &= ~PNG_INFO_sPLT;
      }
   }
#endif

#ifdef PNG_STORE_UNKNOWN_CHUNKS_SUPPORTED
   if ((mask & PNG_FREE_UNKN) & info_ptr->free_me)
   {
      if (num != -1)
      {
          if (info_ptr->unknown_chunks)
          {
             png_free(png_ptr, info_ptr->unknown_chunks[num].data);
             info_ptr->unknown_chunks[num].data = NULL;
          }
      }

      else
      {
         unsigned int i;

         if (info_ptr->unknown_chunks_num)
         {
            for (i = 0; i < info_ptr->unknown_chunks_num; i++)
               png_free_data(png_ptr, info_ptr, PNG_FREE_UNKN, (int)i);

            png_free(png_ptr, info_ptr->unknown_chunks);
            info_ptr->unknown_chunks = NULL;
            info_ptr->unknown_chunks_num = 0;
         }
      }
   }
#endif

#ifdef PNG_hIST_SUPPORTED
   /* Free any hIST entry */
   if ((mask & PNG_FREE_HIST)  & info_ptr->free_me)
   {
      png_free(png_ptr, info_ptr->hist);
      info_ptr->hist = NULL;
      info_ptr->valid &= ~PNG_INFO_hIST;
   }
#endif

   /* Free any PLTE entry that was internally allocated */
   if ((mask & PNG_FREE_PLTE) & info_ptr->free_me)
   {
      png_free(png_ptr, info_ptr->palette);
      info_ptr->palette = NULL;
      info_ptr->valid &= ~PNG_INFO_PLTE;
      info_ptr->num_palette = 0;
   }

#ifdef PNG_INFO_IMAGE_SUPPORTED
   /* Free any image bits attached to the info structure */
   if ((mask & PNG_FREE_ROWS) & info_ptr->free_me)
   {
      if (info_ptr->row_pointers)
      {
         png_uint_32 row;
         for (row = 0; row < info_ptr->height; row++)
         {
            png_free(png_ptr, info_ptr->row_pointers[row]);
            info_ptr->row_pointers[row] = NULL;
         }
         png_free(png_ptr, info_ptr->row_pointers);
         info_ptr->row_pointers = NULL;
      }
      info_ptr->valid &= ~PNG_INFO_IDAT;
   }
#endif

   if (num != -1)
      mask &= ~PNG_FREE_MUL;

   info_ptr->free_me &= ~mask;
}
#endif /* defined(PNG_READ_SUPPORTED) || defined(PNG_WRITE_SUPPORTED) */

/* This function returns a pointer to the io_ptr associated with the user
 * functions.  The application should free any memory associated with this
 * pointer before png_write_destroy() or png_read_destroy() are called.
 */
png_voidp PNGAPI
png_get_io_ptr(png_const_structrp png_ptr)
{
   if (png_ptr == NULL)
      return (NULL);

   return (png_ptr->io_ptr);
}

#if defined(PNG_READ_SUPPORTED) || defined(PNG_WRITE_SUPPORTED)
#  ifdef PNG_STDIO_SUPPORTED
/* Initialize the default input/output functions for the PNG file.  If you
 * use your own read or write routines, you can call either png_set_read_fn()
 * or png_set_write_fn() instead of png_init_io().  If you have defined
 * PNG_NO_STDIO or otherwise disabled PNG_STDIO_SUPPORTED, you must use a
 * function of your own because "FILE *" isn't necessarily available.
 */
void PNGAPI
png_init_io(png_structrp png_ptr, png_FILE_p fp)
{
   png_debug(1, "in png_init_io");

   if (png_ptr == NULL)
      return;

   png_ptr->io_ptr = (png_voidp)fp;
}
#  endif

#  ifdef PNG_TIME_RFC1123_SUPPORTED
/* Convert the supplied time into an RFC 1123 string suitable for use in
 * a "Creation Time" or other text-based time string.
 */
int PNGAPI
png_convert_to_rfc1123_buffer(char out[29], png_const_timep ptime)
{
   static PNG_CONST char short_months[12][4] =
        {"Jan", "Feb", "Mar", "Apr", "May", "Jun",
         "Jul", "Aug", "Sep", "Oct", "Nov", "Dec"};

   if (out == NULL)
      return 0;

   if (ptime->year > 9999 /* RFC1123 limitation */ ||
       ptime->month == 0    ||  ptime->month > 12  ||
       ptime->day   == 0    ||  ptime->day   > 31  ||
       ptime->hour  > 23    ||  ptime->minute > 59 ||
       ptime->second > 60)
      return 0;

   {
      size_t pos = 0;
      char number_buf[5]; /* enough for a four-digit year */

#     define APPEND_STRING(string) pos = png_safecat(out, 29, pos, (string))
#     define APPEND_NUMBER(format, value)\
         APPEND_STRING(PNG_FORMAT_NUMBER(number_buf, format, (value)))
#     define APPEND(ch) if (pos < 28) out[pos++] = (ch)

      APPEND_NUMBER(PNG_NUMBER_FORMAT_u, (unsigned)ptime->day);
      APPEND(' ');
      APPEND_STRING(short_months[(ptime->month - 1)]);
      APPEND(' ');
      APPEND_NUMBER(PNG_NUMBER_FORMAT_u, ptime->year);
      APPEND(' ');
      APPEND_NUMBER(PNG_NUMBER_FORMAT_02u, (unsigned)ptime->hour);
      APPEND(':');
      APPEND_NUMBER(PNG_NUMBER_FORMAT_02u, (unsigned)ptime->minute);
      APPEND(':');
      APPEND_NUMBER(PNG_NUMBER_FORMAT_02u, (unsigned)ptime->second);
      APPEND_STRING(" +0000"); /* This reliably terminates the buffer */

#     undef APPEND
#     undef APPEND_NUMBER
#     undef APPEND_STRING
   }

   return 1;
}

#     if PNG_LIBPNG_VER < 10700
/* To do: remove the following from libpng-1.7 */
/* Original API that uses a private buffer in png_struct.
 * Deprecated because it causes png_struct to carry a spurious temporary
 * buffer (png_struct::time_buffer), better to have the caller pass this in.
 */
png_const_charp PNGAPI
png_convert_to_rfc1123(png_structrp png_ptr, png_const_timep ptime)
{
   if (png_ptr != NULL)
   {
      /* The only failure above if png_ptr != NULL is from an invalid ptime */
      if (!png_convert_to_rfc1123_buffer(png_ptr->time_buffer, ptime))
         png_warning(png_ptr, "Ignoring invalid time value");

      else
         return png_ptr->time_buffer;
   }

   return NULL;
}
#     endif
#  endif /* PNG_TIME_RFC1123_SUPPORTED */

#endif /* defined(PNG_READ_SUPPORTED) || defined(PNG_WRITE_SUPPORTED) */

png_const_charp PNGAPI
png_get_copyright(png_const_structrp png_ptr)
{
   PNG_UNUSED(png_ptr)  /* Silence compiler warning about unused png_ptr */
#ifdef PNG_STRING_COPYRIGHT
   return PNG_STRING_COPYRIGHT
#else
#  ifdef __STDC__
   return PNG_STRING_NEWLINE \
     "libpng version 1.6.0beta30 - September 27, 2012" PNG_STRING_NEWLINE \
     "Copyright (c) 1998-2012 Glenn Randers-Pehrson" PNG_STRING_NEWLINE \
     "Copyright (c) 1996-1997 Andreas Dilger" PNG_STRING_NEWLINE \
     "Copyright (c) 1995-1996 Guy Eric Schalnat, Group 42, Inc." \
     PNG_STRING_NEWLINE;
#  else
      return "libpng version 1.6.0beta30 - September 27, 2012\
      Copyright (c) 1998-2012 Glenn Randers-Pehrson\
      Copyright (c) 1996-1997 Andreas Dilger\
      Copyright (c) 1995-1996 Guy Eric Schalnat, Group 42, Inc.";
#  endif
#endif
}

/* The following return the library version as a short string in the
 * format 1.0.0 through 99.99.99zz.  To get the version of *.h files
 * used with your application, print out PNG_LIBPNG_VER_STRING, which
 * is defined in png.h.
 * Note: now there is no difference between png_get_libpng_ver() and
 * png_get_header_ver().  Due to the version_nn_nn_nn typedef guard,
 * it is guaranteed that png.c uses the correct version of png.h.
 */
png_const_charp PNGAPI
png_get_libpng_ver(png_const_structrp png_ptr)
{
   /* Version of *.c files used when building libpng */
   return png_get_header_ver(png_ptr);
}

png_const_charp PNGAPI
png_get_header_ver(png_const_structrp png_ptr)
{
   /* Version of *.h files used when building libpng */
   PNG_UNUSED(png_ptr)  /* Silence compiler warning about unused png_ptr */
   return PNG_LIBPNG_VER_STRING;
}

png_const_charp PNGAPI
png_get_header_version(png_const_structrp png_ptr)
{
   /* Returns longer string containing both version and date */
   PNG_UNUSED(png_ptr)  /* Silence compiler warning about unused png_ptr */
#ifdef __STDC__
   return PNG_HEADER_VERSION_STRING
#  ifndef PNG_READ_SUPPORTED
   "     (NO READ SUPPORT)"
#  endif
   PNG_STRING_NEWLINE;
#else
   return PNG_HEADER_VERSION_STRING;
#endif
}

#ifdef PNG_SET_UNKNOWN_CHUNKS_SUPPORTED
int PNGAPI
png_handle_as_unknown(png_const_structrp png_ptr, png_const_bytep chunk_name)
{
   /* Check chunk_name and return "keep" value if it's on the list, else 0 */
   png_const_bytep p, p_end;

   if (png_ptr == NULL || chunk_name == NULL || png_ptr->num_chunk_list == 0)
      return PNG_HANDLE_CHUNK_AS_DEFAULT;

   p_end = png_ptr->chunk_list;
   p = p_end + png_ptr->num_chunk_list*5; /* beyond end */

   /* The code is the fifth byte after each four byte string.  Historically this
    * code was always searched from the end of the list, this is no longer
    * necessary because the 'set' routine handles duplicate entries correcty.
    */
   do /* num_chunk_list > 0, so at least one */
   {
      p -= 5;

      if (!memcmp(chunk_name, p, 4))
         return p[4];
   }
   while (p > p_end);

   /* This means that known chunks should be processed and unknown chunks should
    * be handled according to the value of png_ptr->unknown_default; this can be
    * confusing because, as a result, there are two levels of defaulting for
    * unknown chunks.
    */
   return PNG_HANDLE_CHUNK_AS_DEFAULT;
}

#ifdef PNG_READ_UNKNOWN_CHUNKS_SUPPORTED
int /* PRIVATE */
png_chunk_unknown_handling(png_const_structrp png_ptr, png_uint_32 chunk_name)
{
   png_byte chunk_string[5];

   PNG_CSTRING_FROM_CHUNK(chunk_string, chunk_name);
   return png_handle_as_unknown(png_ptr, chunk_string);
}
#endif /* READ_UNKNOWN_CHUNKS */
#endif /* SET_UNKNOWN_CHUNKS */

#ifdef PNG_READ_SUPPORTED
/* This function, added to libpng-1.0.6g, is untested. */
int PNGAPI
png_reset_zstream(png_structrp png_ptr)
{
   if (png_ptr == NULL)
      return Z_STREAM_ERROR;

   /* WARNING: this resets the window bits to the maximum! */
   return (inflateReset(&png_ptr->zstream));
}
#endif /* PNG_READ_SUPPORTED */

/* This function was added to libpng-1.0.7 */
png_uint_32 PNGAPI
png_access_version_number(void)
{
   /* Version of *.c files used when building libpng */
   return((png_uint_32)PNG_LIBPNG_VER);
}


#if defined(PNG_READ_SUPPORTED) || defined(PNG_WRITE_SUPPORTED)
/* Ensure that png_ptr->zstream.msg holds some appropriate error message string.
 * If it doesn't 'ret' is used to set it to something appropriate, even in cases
 * like Z_OK or Z_STREAM_END where the error code is apparently a success code.
 */
void /* PRIVATE */
png_zstream_error(png_structrp png_ptr, int ret)
{
   /* Translate 'ret' into an appropriate error string, priority is given to the
    * one in zstream if set.  This always returns a string, even in cases like
    * Z_OK or Z_STREAM_END where the error code is a success code.
    */
   if (png_ptr->zstream.msg == NULL) switch (ret)
   {
      default:
      case Z_OK:
         png_ptr->zstream.msg = PNGZ_MSG_CAST("unexpected zlib return code");
         break;

      case Z_STREAM_END:
         /* Normal exit */
         png_ptr->zstream.msg = PNGZ_MSG_CAST("unexpected end of LZ stream");
         break;

      case Z_NEED_DICT:
         /* This means the deflate stream did not have a dictionary; this
          * indicates a bogus PNG.
          */
         png_ptr->zstream.msg = PNGZ_MSG_CAST("missing LZ dictionary");
         break;

      case Z_ERRNO:
         /* gz APIs only: should not happen */
         png_ptr->zstream.msg = PNGZ_MSG_CAST("zlib IO error");
         break;

      case Z_STREAM_ERROR:
         /* internal libpng error */
         png_ptr->zstream.msg = PNGZ_MSG_CAST("bad parameters to zlib");
         break;

      case Z_DATA_ERROR:
         png_ptr->zstream.msg = PNGZ_MSG_CAST("damaged LZ stream");
         break;

      case Z_MEM_ERROR:
         png_ptr->zstream.msg = PNGZ_MSG_CAST("insufficient memory");
         break;

      case Z_BUF_ERROR:
         /* End of input or output; not a problem if the caller is doing
          * incremental read or write.
          */
         png_ptr->zstream.msg = PNGZ_MSG_CAST("truncated");
         break;

      case Z_VERSION_ERROR:
         png_ptr->zstream.msg = PNGZ_MSG_CAST("unsupported zlib version");
         break;

      case PNG_UNEXPECTED_ZLIB_RETURN:
         /* Compile errors here mean that zlib now uses the value co-opted in
          * pngpriv.h for PNG_UNEXPECTED_ZLIB_RETURN; update the switch above
          * and change pngpriv.h.  Note that this message is "... return",
          * whereas the default/Z_OK one is "... return code".
          */
         png_ptr->zstream.msg = PNGZ_MSG_CAST("unexpected zlib return");
         break;
   }
}

/* png_convert_size: a PNGAPI but no longer in png.h, so deleted
 * at libpng 1.5.5!
 */

/* Added at libpng version 1.2.34 and 1.4.0 (moved from pngset.c) */
#ifdef PNG_GAMMA_SUPPORTED /* always set if COLORSPACE */
static int
png_colorspace_check_gamma(png_const_structrp png_ptr,
   png_colorspacerp colorspace, png_fixed_point gAMA, int preferred)
   /* preferred:
    *
    *    0: do not override an existing setting, but *do* check for
    *       compatibility with an existing setting.
    *    1: preferred over an existing setting, but only if the existing
    *       setting is compatible with this one (i.e. approximately the same.)
    *    2: overrides existing setting and does not check for compatibility.
    *
    * result:
    *    0: incompatible existing setting, failure case
    *    1: compatible existing setting, existing value retained
    *    2: value written, either an existing value was compatible and preferred
    *       was set or preferred was 2 and an existing value was ignored
    *
    * Use thus:
    *    If you don't want to override an existing setting and *don't* want to
    *    check for compatibility don't call this if the PNG_COLORSPACE_HAVE_
    *    flag is set.
    *
    *    If you want to override an existing setting unconditionally - with no
    *    check on compatibility - call with preferred == 2.
    *
    *    Otherwise you want to check for compatibility with an existing setting,
    *    call with preferred == 0 to favor the existing setting, == 1 to
    *    override the existing setting.
    */
{
   /* The 'invalid' flag needs to be sticky, doing things this way avoids having
    * many messages caused by just one invalid colorspace chunk.
    */
   if (colorspace->flags & PNG_COLORSPACE_INVALID)
      return 0;

   if (preferred < 2 && (colorspace->flags & PNG_COLORSPACE_HAVE_GAMMA))
   {
      png_fixed_point gtest;

      if (!png_muldiv(&gtest, colorspace->gamma, PNG_FP_1, gAMA) ||
         png_gamma_significant(gtest))
      {
         colorspace->flags |= PNG_COLORSPACE_INVALID;
         png_benign_error(png_ptr, "inconsistent gamma values");
         return 0; /* failed */
      }

      else if (!preferred)
         return 1; /* ok, use existing gamma */
   }

   return 2; /* ok, write gamma */
}

int /* PRIVATE */
png_colorspace_set_gamma(png_const_structrp png_ptr,
   png_colorspacerp colorspace, png_fixed_point gAMA, int preferred)
{
   int result = png_colorspace_check_gamma(png_ptr, colorspace, gAMA,
      preferred);

   if (result == 2)
   {
      colorspace->gamma = gAMA;
      colorspace->flags |= PNG_COLORSPACE_HAVE_GAMMA;
   }

   return result;
}

void /* PRIVATE */
png_colorspace_sync_info(png_const_structrp png_ptr, png_inforp info_ptr)
{
   if (info_ptr->colorspace.flags & PNG_COLORSPACE_INVALID)
   {
      /* Everything is invalid */
      info_ptr->valid &= ~(PNG_INFO_gAMA|PNG_INFO_cHRM|PNG_INFO_sRGB|
         PNG_INFO_iCCP);

#     ifdef PNG_COLORSPACE_SUPPORTED
         /* Clean up the iCCP profile now if it won't be used. */
         png_free_data(png_ptr, info_ptr, PNG_FREE_ICCP, -1/*not used*/);
#     else
         PNG_UNUSED(png_ptr)
#     endif
   }

   else
   {
#     ifdef PNG_COLORSPACE_SUPPORTED
         /* Leave the INFO_iCCP flag set if the pngset.c code has already set
          * it; this allows a PNG to contain a profile which matches sRGB and
          * yet still have that profile retrievable by the application.
          */
         if (info_ptr->colorspace.flags & PNG_COLORSPACE_MATCHES_sRGB)
            info_ptr->valid |= PNG_INFO_sRGB;

         else
            info_ptr->valid &= ~PNG_INFO_sRGB;

         if (info_ptr->colorspace.flags & PNG_COLORSPACE_HAVE_ENDPOINTS)
            info_ptr->valid |= PNG_INFO_cHRM;

         else
            info_ptr->valid &= ~PNG_INFO_cHRM;
#     endif

      if (info_ptr->colorspace.flags & PNG_COLORSPACE_HAVE_GAMMA)
         info_ptr->valid |= PNG_INFO_gAMA;

      else
         info_ptr->valid &= ~PNG_INFO_gAMA;
   }
}

#ifdef PNG_READ_SUPPORTED
void /* PRIVATE */
png_colorspace_sync(png_const_structrp png_ptr, png_inforp info_ptr)
{
   if (info_ptr == NULL) /* reduce code size; check here not in the caller */
      return;

   info_ptr->colorspace = png_ptr->colorspace;
   png_colorspace_sync_info(png_ptr, info_ptr);
}
#endif
#endif

#ifdef PNG_COLORSPACE_SUPPORTED
#if 0
/* Added at libpng version 1.2.34 (Dec 8, 2008) and 1.4.0 (Jan 2,
 * 2010: moved from pngset.c) */
/*
 *    Multiply two 32-bit numbers, V1 and V2, using 32-bit
 *    arithmetic, to produce a 64-bit result in the HI/LO words.
 *
 *                  A B
 *                x C D
 *               ------
 *              AD || BD
 *        AC || CB || 0
 *
 *    where A and B are the high and low 16-bit words of V1,
 *    C and D are the 16-bit words of V2, AD is the product of
 *    A and D, and X || Y is (X << 16) + Y.
*/
static void
png_64bit_product (long v1, long v2, unsigned long *hi_product,
    unsigned long *lo_product)
{
   int a, b, c, d;
   long lo, hi, x, y;

   a = (v1 >> 16) & 0xffff;
   b = v1 & 0xffff;
   c = (v2 >> 16) & 0xffff;
   d = v2 & 0xffff;

   lo = b * d;                   /* BD */
   x = a * d + c * b;            /* AD + CB */
   y = ((lo >> 16) & 0xffff) + x;

   lo = (lo & 0xffff) | ((y & 0xffff) << 16);
   hi = (y >> 16) & 0xffff;

   hi += a * c;                  /* AC */

   *hi_product = (unsigned long)hi;
   *lo_product = (unsigned long)lo;
}

static int
png_check_cHRM_fixed(png_const_structrp png_ptr,
   png_fixed_point white_x, png_fixed_point white_y, png_fixed_point red_x,
   png_fixed_point red_y, png_fixed_point green_x, png_fixed_point green_y,
   png_fixed_point blue_x, png_fixed_point blue_y)
{
   int ret = 1;
   unsigned long xy_hi,xy_lo,yx_hi,yx_lo;

   png_debug(1, "in function png_check_cHRM_fixed");

   if (png_ptr == NULL)
      return 0;

   /* (x,y,z) values are first limited to 0..100000 (PNG_FP_1), the white
    * y must also be greater than 0.  To test for the upper limit calculate
    * (PNG_FP_1-y) - x must be <= to this for z to be >= 0 (and the expression
    * cannot overflow.)  At this point we know x and y are >= 0 and (x+y) is
    * <= PNG_FP_1.  The previous test on PNG_MAX_UINT_31 is removed because it
    * pointless (and it produces compiler warnings!)
    */
   if (white_x < 0 || white_y <= 0 ||
         red_x < 0 ||   red_y <  0 ||
       green_x < 0 || green_y <  0 ||
        blue_x < 0 ||  blue_y <  0)
   {
      png_warning(png_ptr,
        "Ignoring attempt to set negative chromaticity value");
      ret = 0;
   }
   /* And (x+y) must be <= PNG_FP_1 (so z is >= 0) */
   if (white_x > PNG_FP_1 - white_y)
   {
      png_warning(png_ptr, "Invalid cHRM white point");
      ret = 0;
   }

   if (red_x > PNG_FP_1 - red_y)
   {
      png_warning(png_ptr, "Invalid cHRM red point");
      ret = 0;
   }

   if (green_x > PNG_FP_1 - green_y)
   {
      png_warning(png_ptr, "Invalid cHRM green point");
      ret = 0;
   }

   if (blue_x > PNG_FP_1 - blue_y)
   {
      png_warning(png_ptr, "Invalid cHRM blue point");
      ret = 0;
   }

   png_64bit_product(green_x - red_x, blue_y - red_y, &xy_hi, &xy_lo);
   png_64bit_product(green_y - red_y, blue_x - red_x, &yx_hi, &yx_lo);

   if (xy_hi == yx_hi && xy_lo == yx_lo)
   {
      png_warning(png_ptr,
         "Ignoring attempt to set cHRM RGB triangle with zero area");
      ret = 0;
   }

   return ret;
}
#endif /*0*/

/* Added at libpng-1.5.5 to support read and write of true CIEXYZ values for
 * cHRM, as opposed to using chromaticities.  These internal APIs return
 * non-zero on a parameter error.  The X, Y and Z values are required to be
 * positive and less than 1.0.
 */
static int
png_xy_from_XYZ(png_xy *xy, const png_XYZ *XYZ)
{
   png_int_32 d, dwhite, whiteX, whiteY;

   d = XYZ->red_X + XYZ->red_Y + XYZ->red_Z;
   if (!png_muldiv(&xy->redx, XYZ->red_X, PNG_FP_1, d)) return 1;
   if (!png_muldiv(&xy->redy, XYZ->red_Y, PNG_FP_1, d)) return 1;
   dwhite = d;
   whiteX = XYZ->red_X;
   whiteY = XYZ->red_Y;

   d = XYZ->green_X + XYZ->green_Y + XYZ->green_Z;
   if (!png_muldiv(&xy->greenx, XYZ->green_X, PNG_FP_1, d)) return 1;
   if (!png_muldiv(&xy->greeny, XYZ->green_Y, PNG_FP_1, d)) return 1;
   dwhite += d;
   whiteX += XYZ->green_X;
   whiteY += XYZ->green_Y;

   d = XYZ->blue_X + XYZ->blue_Y + XYZ->blue_Z;
   if (!png_muldiv(&xy->bluex, XYZ->blue_X, PNG_FP_1, d)) return 1;
   if (!png_muldiv(&xy->bluey, XYZ->blue_Y, PNG_FP_1, d)) return 1;
   dwhite += d;
   whiteX += XYZ->blue_X;
   whiteY += XYZ->blue_Y;

   /* The reference white is simply the sum of the end-point (X,Y,Z) vectors,
    * thus:
    */
   if (!png_muldiv(&xy->whitex, whiteX, PNG_FP_1, dwhite)) return 1;
   if (!png_muldiv(&xy->whitey, whiteY, PNG_FP_1, dwhite)) return 1;

   return 0;
}

static int
png_XYZ_from_xy(png_XYZ *XYZ, const png_xy *xy)
{
   png_fixed_point red_inverse, green_inverse, blue_scale;
   png_fixed_point left, right, denominator;

   /* Check xy and, implicitly, z.  Note that wide gamut color spaces typically
    * have end points with 0 tristimulus values (these are impossible end
    * points, but they are used to cover the possible colors.)
    */
   if (xy->redx < 0 || xy->redx > PNG_FP_1) return 1;
   if (xy->redy < 0 || xy->redy > PNG_FP_1-xy->redx) return 1;
   if (xy->greenx < 0 || xy->greenx > PNG_FP_1) return 1;
   if (xy->greeny < 0 || xy->greeny > PNG_FP_1-xy->greenx) return 1;
   if (xy->bluex < 0 || xy->bluex > PNG_FP_1) return 1;
   if (xy->bluey < 0 || xy->bluey > PNG_FP_1-xy->bluex) return 1;
   if (xy->whitex < 0 || xy->whitex > PNG_FP_1) return 1;
   if (xy->whitey < 0 || xy->whitey > PNG_FP_1-xy->whitex) return 1;

   /* The reverse calculation is more difficult because the original tristimulus
    * value had 9 independent values (red,green,blue)x(X,Y,Z) however only 8
    * derived values were recorded in the cHRM chunk;
    * (red,green,blue,white)x(x,y).  This loses one degree of freedom and
    * therefore an arbitrary ninth value has to be introduced to undo the
    * original transformations.
    *
    * Think of the original end-points as points in (X,Y,Z) space.  The
    * chromaticity values (c) have the property:
    *
    *           C
    *   c = ---------
    *       X + Y + Z
    *
    * For each c (x,y,z) from the corresponding original C (X,Y,Z).  Thus the
    * three chromaticity values (x,y,z) for each end-point obey the
    * relationship:
    *
    *   x + y + z = 1
    *
    * This describes the plane in (X,Y,Z) space that intersects each axis at the
    * value 1.0; call this the chromaticity plane.  Thus the chromaticity
    * calculation has scaled each end-point so that it is on the x+y+z=1 plane
    * and chromaticity is the intersection of the vector from the origin to the
    * (X,Y,Z) value with the chromaticity plane.
    *
    * To fully invert the chromaticity calculation we would need the three
    * end-point scale factors, (red-scale, green-scale, blue-scale), but these
    * were not recorded.  Instead we calculated the reference white (X,Y,Z) and
    * recorded the chromaticity of this.  The reference white (X,Y,Z) would have
    * given all three of the scale factors since:
    *
    *    color-C = color-c * color-scale
    *    white-C = red-C + green-C + blue-C
    *            = red-c*red-scale + green-c*green-scale + blue-c*blue-scale
    *
    * But cHRM records only white-x and white-y, so we have lost the white scale
    * factor:
    *
    *    white-C = white-c*white-scale
    *
    * To handle this the inverse transformation makes an arbitrary assumption
    * about white-scale:
    *
    *    Assume: white-Y = 1.0
    *    Hence:  white-scale = 1/white-y
    *    Or:     red-Y + green-Y + blue-Y = 1.0
    *
    * Notice the last statement of the assumption gives an equation in three of
    * the nine values we want to calculate.  8 more equations come from the
    * above routine as summarised at the top above (the chromaticity
    * calculation):
    *
    *    Given: color-x = color-X / (color-X + color-Y + color-Z)
    *    Hence: (color-x - 1)*color-X + color.x*color-Y + color.x*color-Z = 0
    *
    * This is 9 simultaneous equations in the 9 variables "color-C" and can be
    * solved by Cramer's rule.  Cramer's rule requires calculating 10 9x9 matrix
    * determinants, however this is not as bad as it seems because only 28 of
    * the total of 90 terms in the various matrices are non-zero.  Nevertheless
    * Cramer's rule is notoriously numerically unstable because the determinant
    * calculation involves the difference of large, but similar, numbers.  It is
    * difficult to be sure that the calculation is stable for real world values
    * and it is certain that it becomes unstable where the end points are close
    * together.
    *
    * So this code uses the perhaps slightly less optimal but more
    * understandable and totally obvious approach of calculating color-scale.
    *
    * This algorithm depends on the precision in white-scale and that is
    * (1/white-y), so we can immediately see that as white-y approaches 0 the
    * accuracy inherent in the cHRM chunk drops off substantially.
    *
    * libpng arithmetic: a simple invertion of the above equations
    * ------------------------------------------------------------
    *
    *    white_scale = 1/white-y
    *    white-X = white-x * white-scale
    *    white-Y = 1.0
    *    white-Z = (1 - white-x - white-y) * white_scale
    *
    *    white-C = red-C + green-C + blue-C
    *            = red-c*red-scale + green-c*green-scale + blue-c*blue-scale
    *
    * This gives us three equations in (red-scale,green-scale,blue-scale) where
    * all the coefficients are now known:
    *
    *    red-x*red-scale + green-x*green-scale + blue-x*blue-scale
    *       = white-x/white-y
    *    red-y*red-scale + green-y*green-scale + blue-y*blue-scale = 1
    *    red-z*red-scale + green-z*green-scale + blue-z*blue-scale
    *       = (1 - white-x - white-y)/white-y
    *
    * In the last equation color-z is (1 - color-x - color-y) so we can add all
    * three equations together to get an alternative third:
    *
    *    red-scale + green-scale + blue-scale = 1/white-y = white-scale
    *
    * So now we have a Cramer's rule solution where the determinants are just
    * 3x3 - far more tractible.  Unfortunately 3x3 determinants still involve
    * multiplication of three coefficients so we can't guarantee to avoid
    * overflow in the libpng fixed point representation.  Using Cramer's rule in
    * floating point is probably a good choice here, but it's not an option for
    * fixed point.  Instead proceed to simplify the first two equations by
    * eliminating what is likely to be the largest value, blue-scale:
    *
    *    blue-scale = white-scale - red-scale - green-scale
    *
    * Hence:
    *
    *    (red-x - blue-x)*red-scale + (green-x - blue-x)*green-scale =
    *                (white-x - blue-x)*white-scale
    *
    *    (red-y - blue-y)*red-scale + (green-y - blue-y)*green-scale =
    *                1 - blue-y*white-scale
    *
    * And now we can trivially solve for (red-scale,green-scale):
    *
    *    green-scale =
    *                (white-x - blue-x)*white-scale - (red-x - blue-x)*red-scale
    *                -----------------------------------------------------------
    *                                  green-x - blue-x
    *
    *    red-scale =
    *                1 - blue-y*white-scale - (green-y - blue-y) * green-scale
    *                ---------------------------------------------------------
    *                                  red-y - blue-y
    *
    * Hence:
    *
    *    red-scale =
    *          ( (green-x - blue-x) * (white-y - blue-y) -
    *            (green-y - blue-y) * (white-x - blue-x) ) / white-y
    * -------------------------------------------------------------------------
    *  (green-x - blue-x)*(red-y - blue-y)-(green-y - blue-y)*(red-x - blue-x)
    *
    *    green-scale =
    *          ( (red-y - blue-y) * (white-x - blue-x) -
    *            (red-x - blue-x) * (white-y - blue-y) ) / white-y
    * -------------------------------------------------------------------------
    *  (green-x - blue-x)*(red-y - blue-y)-(green-y - blue-y)*(red-x - blue-x)
    *
    * Accuracy:
    * The input values have 5 decimal digits of accuracy.  The values are all in
    * the range 0 < value < 1, so simple products are in the same range but may
    * need up to 10 decimal digits to preserve the original precision and avoid
    * underflow.  Because we are using a 32-bit signed representation we cannot
    * match this; the best is a little over 9 decimal digits, less than 10.
    *
    * The approach used here is to preserve the maximum precision within the
    * signed representation.  Because the red-scale calculation above uses the
    * difference between two products of values that must be in the range -1..+1
    * it is sufficient to divide the product by 7; ceil(100,000/32767*2).  The
    * factor is irrelevant in the calculation because it is applied to both
    * numerator and denominator.
    *
    * Note that the values of the differences of the products of the
    * chromaticities in the above equations tend to be small, for example for
    * the sRGB chromaticities they are:
    *
    * red numerator:    -0.04751
    * green numerator:  -0.08788
    * denominator:      -0.2241 (without white-y multiplication)
    *
    *  The resultant Y coefficients from the chromaticities of some widely used
    *  color space definitions are (to 15 decimal places):
    *
    *  sRGB
    *    0.212639005871510 0.715168678767756 0.072192315360734
    *  Kodak ProPhoto
    *    0.288071128229293 0.711843217810102 0.000085653960605
    *  Adobe RGB
    *    0.297344975250536 0.627363566255466 0.075291458493998
    *  Adobe Wide Gamut RGB
    *    0.258728243040113 0.724682314948566 0.016589442011321
    */
   /* By the argument, above overflow should be impossible here. The return
    * value of 2 indicates an internal error to the caller.
    */
   if (!png_muldiv(&left, xy->greenx-xy->bluex, xy->redy - xy->bluey, 7))
      return 2;
   if (!png_muldiv(&right, xy->greeny-xy->bluey, xy->redx - xy->bluex, 7))
      return 2;
   denominator = left - right;

   /* Now find the red numerator. */
   if (!png_muldiv(&left, xy->greenx-xy->bluex, xy->whitey-xy->bluey, 7))
      return 2;
   if (!png_muldiv(&right, xy->greeny-xy->bluey, xy->whitex-xy->bluex, 7))
      return 2;

   /* Overflow is possible here and it indicates an extreme set of PNG cHRM
    * chunk values.  This calculation actually returns the reciprocal of the
    * scale value because this allows us to delay the multiplication of white-y
    * into the denominator, which tends to produce a small number.
    */
   if (!png_muldiv(&red_inverse, xy->whitey, denominator, left-right) ||
       red_inverse <= xy->whitey /* r+g+b scales = white scale */)
      return 1;

   /* Similarly for green_inverse: */
   if (!png_muldiv(&left, xy->redy-xy->bluey, xy->whitex-xy->bluex, 7))
      return 2;
   if (!png_muldiv(&right, xy->redx-xy->bluex, xy->whitey-xy->bluey, 7))
      return 2;
   if (!png_muldiv(&green_inverse, xy->whitey, denominator, left-right) ||
       green_inverse <= xy->whitey)
      return 1;

   /* And the blue scale, the checks above guarantee this can't overflow but it
    * can still produce 0 for extreme cHRM values.
    */
   blue_scale = png_reciprocal(xy->whitey) - png_reciprocal(red_inverse) -
      png_reciprocal(green_inverse);
   if (blue_scale <= 0) return 1;


   /* And fill in the png_XYZ: */
   if (!png_muldiv(&XYZ->red_X, xy->redx, PNG_FP_1, red_inverse)) return 1;
   if (!png_muldiv(&XYZ->red_Y, xy->redy, PNG_FP_1, red_inverse)) return 1;
   if (!png_muldiv(&XYZ->red_Z, PNG_FP_1 - xy->redx - xy->redy, PNG_FP_1,
      red_inverse))
      return 1;

   if (!png_muldiv(&XYZ->green_X, xy->greenx, PNG_FP_1, green_inverse)) return 1;
   if (!png_muldiv(&XYZ->green_Y, xy->greeny, PNG_FP_1, green_inverse)) return 1;
   if (!png_muldiv(&XYZ->green_Z, PNG_FP_1 - xy->greenx - xy->greeny, PNG_FP_1,
      green_inverse))
      return 1;

   if (!png_muldiv(&XYZ->blue_X, xy->bluex, blue_scale, PNG_FP_1)) return 1;
   if (!png_muldiv(&XYZ->blue_Y, xy->bluey, blue_scale, PNG_FP_1)) return 1;
   if (!png_muldiv(&XYZ->blue_Z, PNG_FP_1 - xy->bluex - xy->bluey, blue_scale,
      PNG_FP_1))
      return 1;

   return 0; /*success*/
}

static int
png_XYZ_normalize(png_XYZ *XYZ)
{
   png_int_32 Y;

   if (XYZ->red_Y < 0 || XYZ->green_Y < 0 || XYZ->blue_Y < 0 ||
      XYZ->red_X < 0 || XYZ->green_X < 0 || XYZ->blue_X < 0 ||
      XYZ->red_Z < 0 || XYZ->green_Z < 0 || XYZ->blue_Z < 0)
      return 1;

   /* Normalize by scaling so the sum of the end-point Y values is PNG_FP_1.
    * IMPLEMENTATION NOTE: ANSI requires signed overflow not to occur, therefore
    * relying on addition of two positive values producing a negative one is not
    * safe.
    */
   Y = XYZ->red_Y;
   if (0x7fffffff - Y < XYZ->green_X) return 1;
   Y += XYZ->green_Y;
   if (0x7fffffff - Y < XYZ->blue_X) return 1;
   Y += XYZ->blue_Y;

   if (Y != PNG_FP_1)
   {
      if (!png_muldiv(&XYZ->red_X, XYZ->red_X, PNG_FP_1, Y)) return 1;
      if (!png_muldiv(&XYZ->red_Y, XYZ->red_Y, PNG_FP_1, Y)) return 1;
      if (!png_muldiv(&XYZ->red_Z, XYZ->red_Z, PNG_FP_1, Y)) return 1;

      if (!png_muldiv(&XYZ->green_X, XYZ->green_X, PNG_FP_1, Y)) return 1;
      if (!png_muldiv(&XYZ->green_Y, XYZ->green_Y, PNG_FP_1, Y)) return 1;
      if (!png_muldiv(&XYZ->green_Z, XYZ->green_Z, PNG_FP_1, Y)) return 1;

      if (!png_muldiv(&XYZ->blue_X, XYZ->blue_X, PNG_FP_1, Y)) return 1;
      if (!png_muldiv(&XYZ->blue_Y, XYZ->blue_Y, PNG_FP_1, Y)) return 1;
      if (!png_muldiv(&XYZ->blue_Z, XYZ->blue_Z, PNG_FP_1, Y)) return 1;
   }

   return 0;
}

static int
png_colorspace_endpoints_match(const png_xy *xy1, const png_xy *xy2, int delta)
{
   /* Allow an error of +/-0.01 (absolute value) on each chromaticity */
   return !(PNG_OUT_OF_RANGE(xy1->whitex, xy2->whitex,delta) ||
      PNG_OUT_OF_RANGE(xy1->whitey, xy2->whitey,delta) ||
      PNG_OUT_OF_RANGE(xy1->redx,   xy2->redx,  delta) ||
      PNG_OUT_OF_RANGE(xy1->redy,   xy2->redy,  delta) ||
      PNG_OUT_OF_RANGE(xy1->greenx, xy2->greenx,delta) ||
      PNG_OUT_OF_RANGE(xy1->greeny, xy2->greeny,delta) ||
      PNG_OUT_OF_RANGE(xy1->bluex,  xy2->bluex, delta) ||
      PNG_OUT_OF_RANGE(xy1->bluey,  xy2->bluey, delta));
}

/* Added in libpng-1.6.0, a different check for the validity of a set of cHRM
 * chunk chromaticities.  Earlier checks used to simply look for the overflow
 * condition (where the determinant of the matrix to solve for XYZ ends up zero
 * because the chromaticity values are not all distinct.)  Despite this it is
 * theoretically possible to produce chromaticities that are apparently valid
 * but that rapidly degrade to invalid, potentially crashing, sets because of
 * arithmetic inaccuracies when calculations are performed on them.  The new
 * check is to round-trip xy -> XYZ -> xy and then check that the result is
 * within a small percentage of the original.
 */
static int
png_colorspace_check_xy(png_XYZ *XYZ, const png_xy *xy)
{
   int result;
   png_xy xy_test;

   /* As a side-effect this routine also returns the XYZ endpoints. */
   result = png_XYZ_from_xy(XYZ, xy);
   if (result) return result;

   result = png_xy_from_XYZ(&xy_test, XYZ);
   if (result) return result;

   if (png_colorspace_endpoints_match(xy, &xy_test,
      5/*actually, the math is pretty accurate*/))
      return 0;

   /* Too much slip */
   return 1;
}

/* This is the check going the other way.  The XYZ is modified to normalize it
 * (another side-effect) and the xy chromaticities are returned.
 */
static int
png_colorspace_check_XYZ(png_xy *xy, png_XYZ *XYZ)
{
   int result;
   png_XYZ XYZtemp;

   result = png_XYZ_normalize(XYZ);
   if (result) return result;

   result = png_xy_from_XYZ(xy, XYZ);
   if (result) return result;

   XYZtemp = *XYZ;
   return png_colorspace_check_xy(&XYZtemp, xy);
}

/* Used to check for an endpoint match against sRGB */
static const png_xy sRGB_xy = /* From ITU-R BT.709-3 */
{
   /* color      x       y */
   /* red   */ 64000, 33000,
   /* green */ 30000, 60000,
   /* blue  */ 15000,  6000,
   /* white */ 31270, 32900
};

static int
png_colorspace_set_xy_and_XYZ(png_const_structrp png_ptr,
   png_colorspacerp colorspace, const png_xy *xy, const png_XYZ *XYZ,
   int preferred)
{
   if (colorspace->flags & PNG_COLORSPACE_INVALID)
      return 0;

   /* The consistency check is performed on the chromaticities; this factors out
    * variations because of the normalization (or not) of the end point Y
    * values.
    */
   if (preferred < 2 && (colorspace->flags & PNG_COLORSPACE_HAVE_ENDPOINTS))
   {
      /* The end points must be reasonably close to any we already have.  The
       * following allows an error of up to +/-.001
       */
      if (!png_colorspace_endpoints_match(xy, &colorspace->end_points_xy, 100))
      {
         colorspace->flags |= PNG_COLORSPACE_INVALID;
         png_benign_error(png_ptr, "inconsistent chromaticities");
         return 0; /* failed */
      }

      /* Only overwrite with preferred values */
      if (!preferred)
         return 1; /* ok, but no change */
   }

   colorspace->end_points_xy = *xy;
   colorspace->end_points_XYZ = *XYZ;
   colorspace->flags |= PNG_COLORSPACE_HAVE_ENDPOINTS;

   /* The end points are normally quoted to two decimal digits, so allow +/-0.01
    * on this test.
    */
   if (png_colorspace_endpoints_match(xy, &sRGB_xy, 1000))
      colorspace->flags |= PNG_COLORSPACE_ENDPOINTS_MATCH_sRGB;

   else
      colorspace->flags &= PNG_COLORSPACE_CANCEL(
         PNG_COLORSPACE_ENDPOINTS_MATCH_sRGB);

   return 2; /* ok and changed */
}

int /* PRIVATE */
png_colorspace_set_chromaticities(png_const_structrp png_ptr,
   png_colorspacerp colorspace, const png_xy *xy, int preferred)
{
   /* We must check the end points to ensure they are reasonable - in the past
    * color management systems have crashed as a result of getting bogus
    * colorant values, while this isn't the fault of libpng it is the
    * responsibility of libpng because PNG carries the bomb and libpng is in a
    * position to protect against it.
    */
   png_XYZ XYZ;

   switch (png_colorspace_check_xy(&XYZ, xy))
   {
      case 0: /* success */
         return png_colorspace_set_xy_and_XYZ(png_ptr, colorspace, xy, &XYZ,
            preferred);

      case 1:
         /* We can't invert the chromaticities so we can't produce value XYZ
          * values.  Likely as not a color management system will fail too.
          */
         colorspace->flags |= PNG_COLORSPACE_INVALID;
         png_benign_error(png_ptr, "invalid chromaticities");
         break;

      default:
         /* libpng is broken; this should be a warning but if it happens we
          * want error reports so for the moment it is an error.
          */
         colorspace->flags |= PNG_COLORSPACE_INVALID;
         png_error(png_ptr, "internal error checking chromaticities");
         break;
   }

   return 0; /* failed */
}

int /* PRIVATE */
png_colorspace_set_endpoints(png_const_structrp png_ptr,
   png_colorspacerp colorspace, const png_XYZ *XYZ_in, int preferred)
{
   png_XYZ XYZ = *XYZ_in;
   png_xy xy;

   switch (png_colorspace_check_XYZ(&xy, &XYZ))
   {
      case 0:
         return png_colorspace_set_xy_and_XYZ(png_ptr, colorspace, &xy, &XYZ,
            preferred);

      case 1:
         /* End points are invalid. */
         colorspace->flags |= PNG_COLORSPACE_INVALID;
         png_benign_error(png_ptr, "invalid end points");
         break;

      default:
         colorspace->flags |= PNG_COLORSPACE_INVALID;
         png_error(png_ptr, "internal error checking chromaticities");
         break;
   }

   return 0; /* failed */
}

#if defined PNG_sRGB_SUPPORTED || defined PNG_iCCP_SUPPORTED
static int
is_ICC_signature_char(png_alloc_size_t it)
{
   return it == 32 || (it >= 48 && it <= 57) || (it >= 65 && it <= 90) ||
      (it >= 97 && it <= 122);
}

static int is_ICC_signature(png_alloc_size_t it)
{
   return is_ICC_signature_char(it >> 24) /* checks all the top bits */ &&
      is_ICC_signature_char((it >> 16) & 0xff) &&
      is_ICC_signature_char((it >> 8) & 0xff) &&
      is_ICC_signature_char(it & 0xff);
}

static int
profile_error(png_const_structrp png_ptr, png_colorspacerp colorspace,
   png_const_charp name, png_alloc_size_t value, png_const_charp reason)
{
   size_t pos;
   char message[196]; /* see below for calculation */

   if (colorspace != NULL)
      colorspace->flags |= PNG_COLORSPACE_INVALID;

   pos = png_safecat(message, (sizeof message), 0, "profile '"); /* 9 chars */
   pos = png_safecat(message, pos+79, pos, name); /* Truncate to 79 chars */
   pos = png_safecat(message, (sizeof message), pos, "': "); /* +2 = 90 */
   if (is_ICC_signature(value))
   {
      message[pos++] = '\''; /* total +8; less than the else clause */
      message[pos++] = (char)(value >> 24);
      message[pos++] = (char)(value >> 16);
      message[pos++] = (char)(value >>  8);
      message[pos++] = (char)(value);
      message[pos++] = '\'';
      message[pos++] = ':';
      message[pos++] = ' ';
   }
#  ifdef PNG_WARNINGS_SUPPORTED
   else
      {
         char number[PNG_NUMBER_BUFFER_SIZE]; /* +24 = 114*/

         pos = png_safecat(message, (sizeof message), pos,
            png_format_number(number, number+(sizeof number),
               PNG_NUMBER_FORMAT_x, value));
         pos = png_safecat(message, (sizeof message), pos, "h: "); /*+2 = 116*/
      }
#  endif
   /* The 'reason' is an arbitrary message, allow +79 maximum 195 */
   pos = png_safecat(message, (sizeof message), pos, reason);

   if (colorspace != NULL)
   {
#     ifdef PNG_READ_SUPPORTED
         if (png_ptr->mode & PNG_IS_READ_STRUCT)
            png_chunk_benign_error(png_ptr, message);

         else
#     endif
         png_app_error(png_ptr, message);
   }

#  ifdef PNG_WARNINGS_SUPPORTED
      else
      {
         /* This is recoverable, but make it unconditionally an app_error on
          * write to avoid writing invalid ICC profiles into PNG files.  (I.e.
          * we handle them on read, with a warning, but on write unless the app
          * turns off application errors the PNG won't be written.)
          */
#        ifdef PNG_READ_SUPPORTED
            if (png_ptr->mode & PNG_IS_READ_STRUCT)
               png_chunk_warning(png_ptr, message);

            else
#        endif
            png_app_error(png_ptr, message);
      }
#  endif

   return 0;
}

static int /* PRIVATE */
png_colorspace_set_profile(png_const_structrp png_ptr, png_const_charp name,
   png_colorspacerp colorspace, png_fixed_point gAMA, const png_xy *xy,
   const png_XYZ *XYZ, int intent, int preferred)
{
   int write_intent, write_gamma, result;

   if (colorspace->flags & PNG_COLORSPACE_INVALID)
      return 0;

   /* Similar to the above routines, but ensure that both the gamma and the
    * end-points are checked before doing any assignment.
    */
   if (preferred < 2 && (colorspace->flags & PNG_COLORSPACE_HAVE_INTENT))
   {
      if (colorspace->rendering_intent != intent)
         return profile_error(png_ptr, colorspace, name, (unsigned)intent,
            "inconsistent rendering intents");

      write_intent = 0; /* Ok, don't change */
   }

   else
      write_intent = 1; /* Needs to be written */

   switch (png_colorspace_check_gamma(png_ptr, colorspace, gAMA, preferred))
   {
      case 2:
         write_gamma = 1;
         break;

      case 1:
         write_gamma = 0; /* current value ok and preferred */
         break;

      default: /* error */
         return 0;
   }

   /* Everything seems ok up to this point, update the endpoints and, if this
    * works, do the gamma and intent too.
    */
   result = png_colorspace_set_xy_and_XYZ(png_ptr, colorspace, xy, XYZ,
      preferred);

   switch (result)
   {
      case 2: /* ok, changed */
      case 1: /* ok, no end-point change */
         if (write_intent)
         {
            /* The value of intent must be checked in the caller; bugs in GCC
             * force 'int' to be used as the parameter type.
             */
            colorspace->rendering_intent = (png_uint_16)intent;
            colorspace->flags |= PNG_COLORSPACE_HAVE_INTENT;
            result = 2;
         }

         if (write_gamma)
         {
            colorspace->gamma = gAMA;
            colorspace->flags |= PNG_COLORSPACE_HAVE_GAMMA;
            result = 2;
         }

         return result;

      default: /* failure */
         return 0;
   }
}
#endif /* sRGB || iCCP */

#ifdef PNG_sRGB_SUPPORTED
int /* PRIVATE */
png_colorspace_set_sRGB(png_const_structrp png_ptr, png_colorspacerp colorspace,
   int intent, int preferred)
{
   /* sRGB sets known gamma, end points and (from the chunk) intent. */
   /* IMPORTANT: these are not necessarily the values found in an ICC profile
    * because ICC profiles assume a D50 environment and therefore use XYZ values
    * appropriate to a D50 environment.  Perhaps we should too; it's just
    * slightly weird because the chromaticities of the adapted colorants don't
    * match the above values.
    */
   static const png_XYZ sRGB_XYZ = /* D65 XYZ (*not* the D50 adapted values!) */
   {
      /* color      X      Y      Z */
      /* red   */ 41239, 21264,  1933,
      /* green */ 35758, 71517, 11919,
      /* blue  */ 18048,  7219, 95053
   };

   int result;

   /* The above XYZ values, which are accurate to 5dp, produce rgb to gray
    * coefficients of (6968,23435,2366), which are reduced (because they add up
    * to 32769 not 32768) to (6968,23434,2366).  These are the values that
    * libpng has traditionally used (and are the best values given the 15bit
    * algorithm used by the rgb to gray code.)
    */
   if (intent < 0 || intent >= PNG_sRGB_INTENT_LAST)
      return profile_error(png_ptr, colorspace, "sRGB", (unsigned)intent,
         "invalid sRGB rendering intent");

   result = png_colorspace_set_profile(png_ptr, "sRGB", colorspace,
      PNG_GAMMA_sRGB_INVERSE, &sRGB_xy, &sRGB_XYZ, intent, preferred);

   /* The implicit profile is the sRGB one, so: */
   if (result)
      colorspace->flags |= PNG_COLORSPACE_MATCHES_sRGB;

   return result;
}
#endif /* sRGB */

#ifdef PNG_iCCP_SUPPORTED
/* Encoded value of D50 as an ICC XYZNumber.  From the ICC 2010 spec the value
 * is XYZ(0.9642,1.0,0.8249), which scales to:
 *
 *    (63189.8112, 65536, 54060.6464)
 */
static const png_byte D50_nCIEXYZ[12] =
   { 0x00, 0x00, 0xf6, 0xd6, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0xd3, 0x2d };

int /* PRIVATE */
png_icc_check_length(png_const_structrp png_ptr, png_colorspacerp colorspace,
   png_const_charp name, png_uint_32 profile_length)
{
   if (profile_length < 132)
      return profile_error(png_ptr, colorspace, name, profile_length,
         "too short");

   if (profile_length & 3)
      return profile_error(png_ptr, colorspace, name, profile_length,
         "invalid length");

   return 1;
}

int /* PRIVATE */
png_icc_check_header(png_const_structrp png_ptr, png_colorspacerp colorspace,
   png_const_charp name, png_uint_32 profile_length,
   png_const_bytep profile/* first 132 bytes only */, int color_type)
{
   png_uint_32 temp;
   png_uint_32 info = 0; /* bitmask of profile info */

   /* Length check; this cannot be ignored in this code because profile_length
    * is used later to check the tag table, so even if the profile seems over
    * long profile_length from the caller must be correct.  The caller can fix
    * this up on read or write by just passing in the profile header length.
    */
   temp = png_get_uint_32(profile);
   if (temp != profile_length)
      return profile_error(png_ptr, colorspace, name, temp,
         "length does not match profile");

   temp = png_get_uint_32(profile+128); /* tag count: 12 bytes/tag */
   if (temp > 357913930 || /* (2^32-4-132)/12: maxium possible tag count */
      profile_length < 132+12*temp) /* truncated tag table */
      return profile_error(png_ptr, colorspace, name, temp,
         "tag count too large");

   /* The 'intent' must be valid or we can't store it, ICC limits the intent to
    * 16 bits.
    */
   temp = png_get_uint_32(profile+64);
   if (temp >= 0xffff) /* The ICC limit */
      return profile_error(png_ptr, colorspace, name, temp,
         "invalid rendering intent");

   /* This is just a warning because the profile may be valid in future
    * versions.
    */
   if (temp >= PNG_sRGB_INTENT_LAST)
      (void)profile_error(png_ptr, NULL, name, temp,
         "intent outside defined range");

   /* At this point the tag table can't be checked because it hasn't necessarily
    * been loaded; however, various header fields can be checked.  These checks
    * are for values permitted by the PNG spec in an ICC profile; the PNG spec
    * restricts the profiles that can be passed in an iCCP chunk (they must be
    * appropriate to processing PNG data!)
    */

   /* Data checks (could be skipped).  These checks must be independent of the
    * version number; however, the version number doesn't accomodate changes in
    * the header fields (just the known tags and the interpretation of the
    * data.)
    */
   temp = png_get_uint_32(profile+36); /* signature 'ascp' */
   if (temp != 0x61637370)
      return profile_error(png_ptr, colorspace, name, temp,
         "invalid signature");

   /* Currently the PCS illuminant/adopted white point (the computational
    * white point) are required to be D50,
    * however the profile contains a record of the illuminant so perhaps ICC
    * expects to be able to change this in the future (despite the rationale in
    * the introduction for using a fixed PCS adopted white.)  Consequently the
    * following is just a warning.
    */
   if (memcmp(profile+68, D50_nCIEXYZ, 12) != 0)
      (void)profile_error(png_ptr, NULL, name, 0/*no tag value*/,
         "PCS illuminant is not D50");

   /* The PNG spec requires this:
    * "If the iCCP chunk is present, the image samples conform to the colour
    * space represented by the embedded ICC profile as defined by the
    * International Color Consortium [ICC]. The colour space of the ICC profile
    * shall be an RGB colour space for colour images (PNG colour types 2, 3, and
    * 6), or a greyscale colour space for greyscale images (PNG colour types 0
    * and 4)."
    *
    * This checking code ensures the embedded profile (on either read or write)
    * conforms to the specification requirements.  Notice that an ICC 'gray'
    * color-space profile contains the information to transform the monochrome
    * data to XYZ or L*a*b (according to which PCS the profile uses) and this
    * should be used in preference to the standard libpng K channel replication
    * into R, G and B channels.
    *
    * Previously it was suggested that an RGB profile on grayscale data could be
    * handled.  However it it is clear that using an RGB profile in this context
    * must be an error - there is no specification of what it means.  Thus it is
    * almost certainly more correct to ignore the profile.
    */
   temp = png_get_uint_32(profile+16); /* data colour space field */
   switch (temp)
   {
      case 0x52474220: /* 'RGB ' */
         if (!(color_type & PNG_COLOR_MASK_COLOR))
            return profile_error(png_ptr, colorspace, name, temp,
               "RGB color space not permitted on grayscale PNG");
         info |= PNG_ICC_RGB;
         break;

      case 0x47524159: /* 'GRAY' */
         if (color_type & PNG_COLOR_MASK_COLOR)
            return profile_error(png_ptr, colorspace, name, temp,
               "Gray color space not permitted on RGB PNG");
         break;

      default:
         return profile_error(png_ptr, colorspace, name, temp,
            "invalid ICC profile color space");
   }

   /* It is up to the application to check that the profile class matches the
    * application requirements; the spec provides no guidance, but it's pretty
    * weird if the profile is not scanner ('scnr'), monitor ('mntr'), printer
    * ('prtr') or 'spac' (for generic color spaces).  Issue a warning in these
    * cases.  Issue an error for device link or abstract profiles - these don't
    * contain the records necessary to transform the color-space to anything
    * other than the target device (and not even that for an abstract profile).
    * Profiles of these classes may not be embedded in images.
    */
   temp = png_get_uint_32(profile+12); /* profile/device class */
   switch (temp)
   {
      case 0x73636E72: /* 'scnr' */
      case 0x6D6E7472: /* 'mntr' */
      case 0x70727472: /* 'prtr' */
      case 0x73706163: /* 'spac' */
         /* All supported */
         break;

      case 0x61627374: /* 'abst' */
         /* May not be embedded in an image */
         return profile_error(png_ptr, colorspace, name, temp,
            "invalid embedded Abstract ICC profile");

      case 0x6C696E6B: /* 'link' */
         /* DeviceLink profiles cannnot be interpreted in a non-device specific
          * fashion, if an app uses the AToB0Tag in the profile the results are
          * undefined unless the result is sent to the intended device,
          * therefore a DeviceLink profile should not be found embedded in a
          * PNG.
          */
         return profile_error(png_ptr, colorspace, name, temp,
            "unexpected DeviceLink ICC profile class");

      case 0x6E6D636C: /* 'nmcl' */
         /* A NamedColor profile is also device specific, however it doesn't
          * contain an AToB0 tag that is open to misintrepretation.  Almost
          * certainly it will fail the tests below.
          */
         (void)profile_error(png_ptr, NULL, name, temp,
            "unexpected NamedColor ICC profile class");
         break;

      default:
         /* To allow for future enhancements to the profile accept unrecognized
          * profile classes with a warning, these then hit the test below on the
          * tag content to ensure they are backward compatible with one of the
          * understood profiles.
          */
         (void)profile_error(png_ptr, NULL, name, temp,
            "unrecognized ICC profile class");
         break;
   }

   /* For any profile other than a device link one the PCS must be encoded
    * either in XYZ or Lab.
    */
   temp = png_get_uint_32(profile+20);
   switch (temp)
   {
      case 0x58595A20: /* 'XYZ ' */
         info |= PNG_ICC_PCSXYZ;
         break;

      case 0x4C616220: /* 'Lab ' */
         break;

      default:
         return profile_error(png_ptr, colorspace, name, temp,
            "unexpected ICC PCS encoding");
   }

   /* Store the profile info flags */
   colorspace->icc_info = info;
   return 1;
}

static png_uint_32
png_find_icc_tag(png_const_bytep profile, png_uint_32 tag, png_uint_32p length)
   /* Find a single tag in the tag table, returns 0 if the tag is not found,
    * else returns the offset in the profile of the tag and, via *length, the
    * length from the tag table.
    *
    * TODO: this can probably be avoided by caching the values.
    */
{
   png_uint_32 tag_count = png_get_uint_32(profile+128);

   profile += 132;

   while (tag_count-- > 0)
   {
      if (png_get_uint_32(profile) == tag)
      {
         *length = png_get_uint_32(profile+8);
         return png_get_uint_32(profile+4);
      }
      profile += 12;
   }

   return 0;
}

/* Useful types used for the math.
 * NOTE: the use of const on array types here actually creates the type (const
 * png_int_32)[], not (const (png_int_32[])), consequently a compiler may object
 * to passing a (png_int_32[]) (which does not have const elements).
 */
#if __GNUC__ == 4 && __GNUC_MINOR__ == 2
   /* GCC 4.2 has an optimization bug which means that if this code is compiled
    * with any optimization (i.e. not -O0) it somehow manages to make casts to
    * png_const_icc_matrixrp not work in some cases and so warns for some
    * function calls.  This works round the problem without harming optimization
    * with other compilers.
    */
#  define PNG_ICC_CONST
#else
#  define PNG_ICC_CONST const
#endif
typedef png_int_32                              png_icc_vector[3];
typedef png_int_32 (*PNG_RESTRICT               png_icc_vectorrp)[3];
typedef PNG_ICC_CONST png_int_32 (*PNG_RESTRICT png_const_icc_vectorrp)[3];
#define png_cpv(vector) png_constcast(PNG_ICC_CONST png_icc_vector*,&vector)

typedef png_int_32                              png_icc_matrix[3][3];
typedef png_int_32 (*PNG_RESTRICT               png_icc_matrixrp)[3][3];
typedef PNG_ICC_CONST png_int_32 (*PNG_RESTRICT png_const_icc_matrixrp)[3][3];
#define png_cpm(matrix) png_constcast(PNG_ICC_CONST png_icc_matrix*,&matrix)

/* These two painfully complex routines are to detect under or overflow on
 * addition or subtraction of two 32-bit signed integers.  There's probably a
 * better way of doing this.
 *
 * TODO: look at the on-line resources for this kind of bit banging.
 */
static int
png_add(png_int_32 * PNG_RESTRICT result, png_int_32 a, png_int_32 b)
{
   if ((a ^ b) < 0 ||  /* Signs differ */
      (a >= 0 && b <= 0x7fffffff-a) ||
      (a < 0 && b >= (-0x7fffffff-1)-a))
   {
      *result = a+b;
      return 1;
   }

   return 0; /* overflow */
}

static int
png_sub(png_int_32 * PNG_RESTRICT result, png_int_32 a, png_int_32 b)
{
   if ((a ^ b) > 0 || /* Signs the same, and neither is zero */
      (a >= 0 && b >= a-0x7fffffff) ||
      (a < 0 && a >= (-0x7fffffff-1)+b))
   {
      *result = a-b;
      return 1;
   }

   return 0; /* overflow */
}

static int
png_matrix_x_vector(png_const_icc_matrixrp m, png_const_icc_vectorrp v,
   png_icc_vectorrp o)
   /* Apply the matrix (prefixed) to the column vector, updating the vector with
    * the result.
    */
{
   int row;

   /* NOTE: this makes no attempt to avoid intermediate sum overflow. */
   for (row=0; row<3; ++row)
   {
      int column;
      png_int_32 e = 0;

      for (column=0; column<3; ++column)
      {
         png_int_32 temp;

         if (!png_muldiv(&temp, (*m)[row][column], (*v)[column], 65536) ||
            !png_add(&e, e, temp))
            return 0; /* overflow */
      }

      (*o)[row] = e;
   }

   return 1;
}

static int
png_matrix_x_TmatrixT(png_const_icc_matrixrp m1, png_const_icc_matrixrp m2,
   png_icc_matrixrp o)
   /* NOTE: this passes in the transpose of the input matrix (because it passes
    * rows, not columns to x_vector) and then transposes the output too.  To get
    * correct matrix multiplication of two matrices it is necessary to transpose
    * the second matrix both before and after this function.
    */
{
   int row;

   for (row=0; row<3; ++row)
      if (!png_matrix_x_vector(m1, &(*m2)[row], &(*o)[row]))
         return 0;

   return 1;
}

static int
png_cofactor(png_int_32 *PNG_RESTRICT d, png_const_icc_matrixrp m, int i, int j)
{
   /* The determinant of a 2x2 matrix is m[0][0]m[1][1] - m[0][1]m[1][0], i and
    * j are in the range 0..2 and select out m[i][] and m[][j].
    */
   png_int_32 a, b;
   const int i_0 = (i>0?0:1);
   const int i_1 = (i<2?2:1);
   const int j_0 = (j>0?0:1);
   const int j_1 = (j<2?2:1);

   if (png_muldiv(&a, (*m)[i_0][j_0], (*m)[i_1][j_1], 65536) &&
      png_muldiv(&b, (*m)[i_0][j_1], (*m)[i_1][j_0], 65536))
   {
      png_int_32 temp;

      /* The cofactor is (a-b) times (-1)^(i+j): */
      if (((i+j) & 1) != 0)
         temp = a, a = b, b = temp;

      if (png_sub(d, a, b))
         return 1;
   }

   return 0; /* overflow */
}

static int
png_determinant(png_int_32 * PNG_RESTRICT result, png_const_icc_matrixrp m)
{
   /* Develop from the first row: */
   int j;
   png_int_32 d = 0;

   for (j=0; j<3; ++j)
   {
      png_int_32 cofactor, product;

      if (png_cofactor(&cofactor, m, 0, j) &&
         png_muldiv(&product, (*m)[0][j], cofactor, 65536) &&
         png_add(&d, d, product))
         continue;

      return 0; /* overflow */
   }

   *result = d;
   return 1;
}

static int
png_invert_matrix(png_const_icc_matrixrp m, png_icc_matrixrp o)
   /* Invert the given matrix. */
{
   /* This is the algorithm you learnt in highschool; the cofactor method.  Each
    * element (i,j) of the original matrix is replaced by the 2x2 determinant of
    * the matrix obtained by striking out everything in the same row or column
    * as the transposed element (j,i), negated if j+i is odd, and the whole
    * divided by the determinant of the original.
    */
   png_int_32 d;

   if (png_determinant(&d, m) && d != 0)
   {
      int i;

      for (i=0; i<3; ++i)
      {
         int j;

         for (j=0; j<3; ++j)
         {
            png_int_32 cofactor;

            if (png_cofactor(&cofactor, m, j, i/*transposed*/) &&
               png_muldiv(&(*o)[i][j], cofactor, 65536, d))
               continue;

            return 0; /* overflow in element calculation */
         }
      }

      return 1;
   }

   return 0; /* overflow in determinant or zero determinant */
}

static int
png_icc_find_wtpt(png_const_structrp png_ptr, png_const_charp name,
   png_const_bytep profile, png_icc_vectorrp adapted_white_point)
   /* The mediaWhitePointTag contains an adapted white point (the observer
    * white point) expressed as XYZ tristimulus values. It is always adapted
    * to the PCS illuminant (but is XYZ even when the PCS is PCSLAB encoded.)
    */
{
   png_uint_32 tag_length;
   png_uint_32 tag_start = png_find_icc_tag(profile, 0x77747074/*'wtpt'*/,
      &tag_length);

   if (tag_start > 0 && tag_length == 20)
   {
      png_const_bytep tag = profile+tag_start;
      png_uint_32 temp = png_get_uint_32(tag);

      if (temp == 0x58595A20 /* 'XYZ ' */)
      {
         /* The media white point tag is chromatically adapted using the
          * chromatic adaptation matrix and so the adaptation must be inverted
          * to find the original white point.  The tag should match the PCS
          * illuminant for display ('mntr') profiles (9.2.34 of the 2010 spec)
          * and, for color space profiles, it is meaningless and apparently
          * unspecified what happens if it does not.
          *
          * This is just a warning at present - one old sRGB profile triggers
          * it; see the note below on the sRGB profile signatures (for the
          * profile "sRGB Profile.icc".)  In that profile the mediaWhitePointTag
          * is incorrectly recorded with the D65 (not D50) values.
          */
         temp = png_get_uint_32(profile+12);
         if ((temp == 0x6D6E7472 /* 'mntr' */ ||
            temp == 0x73706163 /* 'spac' */) &&
            memcmp(profile+68, tag+8, 12) != 0)
            (void)profile_error(png_ptr, NULL, name, temp,
               "media white point differs from image adopted white");

         (*adapted_white_point)[0] = png_get_int_32(tag+ 8);
         (*adapted_white_point)[1] = png_get_int_32(tag+12);
         (*adapted_white_point)[2] = png_get_int_32(tag+16);
         return 1;
      }

      else
         (void)profile_error(png_ptr, NULL, name, temp,
            "invalid type for mediaWhitePointTag");
   }

   else /* This should have been caught before */
      png_error(png_ptr, "lost 'wtpt'");

   return 0;
}

static int
png_icc_find_XYZ(png_const_structrp png_ptr, png_const_charp name,
   png_const_bytep profile, png_uint_32 tag_id, png_icc_vectorrp column)
{
   png_uint_32 tag_length;
   png_uint_32 tag_start = png_find_icc_tag(profile, tag_id, &tag_length);

   if (tag_start > 0 && tag_length == 20)
   {
      png_const_bytep tag = profile+tag_start;
      png_uint_32 temp = png_get_uint_32(tag);

      if (temp == 0x58595A20 /* 'XYZ ' */)
      {
         (*column)[0] = png_get_int_32(tag+ 8);
         (*column)[1] = png_get_int_32(tag+12);
         (*column)[2] = png_get_int_32(tag+16);
         return 1;
      }

      else
         (void)profile_error(png_ptr, NULL, name, temp,
            "invalid type for <rgb>MatrixColumnTag");
   }

   else /* This should have been caught before */
      png_error(png_ptr, "lost '[c]XYZ'");

   return 0;
}

static int /* 0: fail, 1: identity, 2: not identity */
png_icc_find_chad(png_const_structrp png_ptr, png_const_charp name,
   png_const_bytep profile, png_icc_matrixrp adaptation_matrix,
   png_icc_matrixrp inverted_adaptation_matrix)
   /* The PNG cHRM chunk records the chromaticities of the colorants.
    * Chromaticities are a measure of the appearance of the colors to a
    * typical human observer in a specified viewing environment.  The PNG
    * specification does not list a viewing environment, thus we must
    * assume that the values have not been adjusted (adapted) for a
    * particular viewing environment.  This means, implicitly, that a PNG
    * image is actually adapted for a white point equivalent to the
    * maximum colorant values, and this is also implied by storing a
    * chromaticity which has a white point derived simply from maximum
    * colorant values.
    *
    * All of the methods for determining the cHRM values depend on
    * reversing the adaptatation to the PCS adopted white (D50); this is
    * because in all cases one or other PCS value has to be used.
    *
    * This routine determines if 'chad' tag is present (if not the adopted white
    * of the scene is D50 and no adaptation was performed) and returns the
    * inverted matrix.
    */
   {
   png_uint_32 tag_start, tag_length;

   tag_start = png_find_icc_tag(profile, 0x63686164/*'chad'*/, &tag_length);

   if (tag_start > 0)
   {
      if (tag_length == 44) /* This was checked before */
      {
         png_const_bytep tag = profile+tag_start;
         png_uint_32 temp = png_get_uint_32(tag);

         if (temp == 0x73663332 /* 'sf32' */)
         {
            /* And the arguments are 9 15.16 values left to right then top
             * to bottom for the forward adaptation matrix, these must be
             * invertible and we need the inverted matrix here.
             */
            png_int_32 * PNG_RESTRICT op = &(*adaptation_matrix)[0][0];
            int i;

            tag += 8;

            for (i=0; i<9; ++i, tag += 4)
               *op++ = png_get_int_32(tag);

            if (png_invert_matrix(
                  png_constcast(png_const_icc_matrixrp, adaptation_matrix),
                  inverted_adaptation_matrix))
               return 2;

            (void)profile_error(png_ptr, NULL, name, temp,
               "singular or overflowed ICC profile chromaticAdaptationTag");
         }

         else
            (void)profile_error(png_ptr, NULL, name, temp,
               "invalid type for ICC profile chromaticAdaptationTag");
      }

      else /* Internal libpng error */
         (void)profile_error(png_ptr, NULL, name, tag_length,
            "invalid length for ICC profile chromaticAdaptationTag");
   }

   else
   {
      /* No 'chad' means no adaptation, so return the identity matrix and '1' to
       * indicate identity.
       */
      memset(adaptation_matrix, 0, sizeof *adaptation_matrix);
      (*adaptation_matrix)[0][0] = 0x10000;
      (*adaptation_matrix)[1][1] = 0x10000;
      (*adaptation_matrix)[2][2] = 0x10000;
      memcpy(inverted_adaptation_matrix, adaptation_matrix,
         sizeof *inverted_adaptation_matrix);
      return 1;
   }

   /* Error return */
   return 0;
}

static int
png_icc_set_cHRM_from_chrm(png_const_structrp png_ptr,
   png_colorspacerp colorspace, png_const_charp name, png_const_bytep profile)
   /* Find the PNG cHRM chunk values from the chromaticityTag entry from the ICC
    * profile.  This tag stores the chromaticities of the colorants unadapted to
    * the PCS white, however the white point, which tells us the relative
    * intensity of the colorants, is not given.  We can get the white point from
    * the mediaWhitePointTag value, which should be present in all profiles,
    * however this is adapted to the PCS illuminated/adopted white, so must be
    * unadapted.
    */
{
   png_uint_32 tag_length;
   png_uint_32 tag_start = png_find_icc_tag(profile, 0x6368726D/* 'chrm' */,
      &tag_length);

   if (tag_start > 0 && tag_length == 36)
   {
      png_const_bytep tag = profile+tag_start;
      png_uint_32 temp = png_get_uint_32(tag);

      if (temp == 0x6368726D && /* type must be 'chrm' */
         png_get_uint_16(tag+8) == 3) /* three channels */
      {
         png_xy cHRM_xy;

         tag += 12;

         /* The ICC chromaticities are stored as 16.16 unsigned numbers,
          * convert to png_fixed_point, because the ICC values are
          * unsigned the >>1 below is used to avoid unsigned/signed
          * overflow.
          */
         if (png_muldiv(&cHRM_xy.redx,
               (png_int_32)(png_get_uint_32(tag+ 0)>>1), PNG_FP_1, 65536>>1) &&
            png_muldiv(&cHRM_xy.redy,
               (png_int_32)(png_get_uint_32(tag+ 4)>>1), PNG_FP_1, 65536>>1) &&
            png_muldiv(&cHRM_xy.greenx,
               (png_int_32)(png_get_uint_32(tag+ 8)>>1), PNG_FP_1, 65536>>1) &&
            png_muldiv(&cHRM_xy.greeny,
               (png_int_32)(png_get_uint_32(tag+12)>>1), PNG_FP_1, 65536>>1) &&
            png_muldiv(&cHRM_xy.bluex,
               (png_int_32)(png_get_uint_32(tag+16)>>1), PNG_FP_1, 65536>>1) &&
            png_muldiv(&cHRM_xy.bluey,
               (png_int_32)(png_get_uint_32(tag+20)>>1), PNG_FP_1, 65536>>1))
         {
            /* We need a white point chromaticity too, this comes from the
             * media white point, but the value in the profile is adapted
             * to the PCS illuminant (D50) so must be unadapted first.
             */
            png_icc_vector adapted_profile_white;

            if (png_icc_find_wtpt(png_ptr, name, profile,
               &adapted_profile_white))
            {
               png_icc_vector profile_white;
               png_icc_matrix adaptation, inverted_adaptation;

               /* The media white point tag is chromatically adapted using the
                * chromatic adaptation matrix and so the adaptation must be
                * inverted to find the original white point.
                */
               switch (png_icc_find_chad(png_ptr, name, profile, &adaptation,
                  &inverted_adaptation))
               {
                  default: /* error */
                     return 0;

                  case 1:  /* identity */
                     break;

                  case 2:  /* apply the matrix */
                     if (!png_matrix_x_vector(png_cpm(inverted_adaptation),
                        png_cpv(adapted_profile_white), &profile_white))
                     {
                        (void)profile_error(png_ptr, NULL, name, 0,
                           "overflow unadapting mediaWhitePointTag");
                        return 0;
                     }

                     break;
               }

               {
                  /* For the perfect reflector 'Y' shall be normalized
                   * to 1,0 (see ICC 2010 4.14, XYZNumber), but this is
                   * the media white point (not the adopted white)
                   * adapted to the PCS illuminant, so Y might be some
                   * other value, this sanity check is mainly to avoid
                   * integer overflow.
                   */
                  png_int_32 white = profile_white[0] + profile_white[1] +
                     profile_white[2];

                  /* This is a hard error because it makes the profile
                   * meaningless.
                   */
                  if (profile_white[0] < 0 || profile_white[0] > 655360 ||
                     profile_white[1] < 0 || profile_white[1] > 655360 ||
                     profile_white[2] < 0 || profile_white[2] > 655360 ||
                     white < 1000 || white > 655360)
                     (void)profile_error(png_ptr, NULL, name, 0,
                        "bad XYZ in media white point");

                  else
                  {
                     /* We want X/(X+Y+Z)*PNG_FP_1 to scale back to a
                      * png_fixed_point value, this may produce ridiculous
                      * numbers, but the checking on a png_xy value
                      * detects them.
                      */
                     if (png_muldiv(&cHRM_xy.whitex, profile_white[0], PNG_FP_1,
                           white) &&
                        png_muldiv(&cHRM_xy.whitey, profile_white[0], PNG_FP_1,
                           white))
                     {
                        png_XYZ cHRM_XYZ;

                        /* This function returns 0 on success: */
                        if (!png_colorspace_check_xy(&cHRM_XYZ, &cHRM_xy))
                           return png_colorspace_set_xy_and_XYZ(png_ptr,
                              colorspace, &cHRM_xy, &cHRM_XYZ,
                              0/*not preferred*/);

                        /* Else the XYZ value was invalid */
                        (void)profile_error(png_ptr, NULL, name, temp,
                           "invalid colorantTableTag end points");
                     }

                     else
                        return profile_error(png_ptr, colorspace, name, 0,
                          "overflow in media white point chromaticities");
                  }
               }
            } /* 'wtpt' exists and is valid */

            else
               (void)profile_error(png_ptr, NULL, name, 0,
                  "missing or invalid mediaWhitePointTag");
         } /* 'chrm' tag convertion to png_xy ok */

         else
            (void)profile_error(png_ptr, NULL, name, 0,
               "overflow in ICC 'chrm' tag chromaticities");
      }

      else
         (void)profile_error(png_ptr, NULL, name, temp,
            "invalid type or colorant count for ICC profile chromaticityTag");
   }

   else /* checked before, so should not fail */
      png_error(png_ptr, "lost 'chrm'");

   return 0;
}

static int
png_icc_set_cHRM_from_endpoints(png_const_structrp png_ptr,
   png_colorspacerp colorspace, png_const_charp name, png_const_bytep profile,
   png_const_icc_matrixrp XYZ)
   /* The input XYZ values are the three red, green, blue endpoints still
    * adapted to the PCS illuminant.  The adaptation is inverted and the result
    * applied to the profile.  The result is also checked against the
    * mediaWhitePointTag, which should match the sum of the end points.
    */
{
   png_icc_matrix adaptation, inverted_adaptation;
   int chad = png_icc_find_chad(png_ptr, name, profile, &adaptation,
      &inverted_adaptation);

   if (chad) /* else error finding 'chad' */
   {
      png_icc_matrix end_points;

      if ((colorspace->icc_info & PNG_ICC_mediaWhitePointTag) != 0)
      {
         png_icc_vector profile_white;

         if (png_icc_find_wtpt(png_ptr, name, profile, &profile_white))
         {
            png_icc_vector end_point_white;
            int i;

            /* Sanity check the adapted colorants against the adapted
             * media white point.
             */
            for (i=0; i<3; ++i)
               end_point_white[i] = (*XYZ)[0][i] + (*XYZ)[1][i] + (*XYZ)[2][i];

            /* The values are s15Fixed16Number values.  The delta value allows
             * the two versions of the end point to differ by about 0.001 (1 in
             * 1024) and this is consistent with the test in
             * png_colorspace_set_xy_and_XYZ above.
             */
            if (PNG_OUT_OF_RANGE(profile_white[0], end_point_white[0], 64) ||
                PNG_OUT_OF_RANGE(profile_white[1], end_point_white[1], 64) ||
                PNG_OUT_OF_RANGE(profile_white[2], end_point_white[2], 64))
            {
               /* It is possible that the white point stored was not adapted to
                * the PCS illuminant, check for that case here and do not abort
                * setting cHRM if it seems to be true.
                */
               png_icc_vector adapted_white;

               if (chad != 2 /* Else no chad */ ||
                  !png_matrix_x_vector(png_cpm(adaptation),
                     png_cpv(profile_white), &adapted_white) ||
                   PNG_OUT_OF_RANGE(adapted_white[0], end_point_white[0], 64) ||
                   PNG_OUT_OF_RANGE(adapted_white[1], end_point_white[1], 64) ||
                   PNG_OUT_OF_RANGE(adapted_white[2], end_point_white[2], 64))
               {
                  (void)profile_error(png_ptr, NULL, name, 0,
                     "colorant end-points do not match mediaWhitePointTag");
                  return 0;
               }

               else
               {
                  /* This happens because some writers of profiles (and,
                   * perhaps, some CMS software) no not notice that the
                   * mediaWhitePointTag requires the XYZ of the white point
                   * adapted to the PCS illuminant (using the chad); this is why
                   * the mediaWhitePointTag is always D50 for display profiles!
                   */
                  (void)profile_error(png_ptr, NULL, name, 0,
                     "ICC.1:2010 9.2.34 mediaWhitePointTag not adapted to PCS"
                     " Illuminant (ignored)");
               }
            }
         }

         else
            png_error(png_ptr, "lost 'wtpt'"); /* internal error */
      }

      switch (chad)
      {
         default: /* error */
            return 0;

         case 1:  /* identity */
            memcpy(&end_points, XYZ, sizeof end_points);
            break;

         case 2:  /* apply the matrix */
            /* The input XYZ rows are unadapted using the 'chad' matrix and
             * assigned to the end_points rows.
             */
            if (!png_matrix_x_TmatrixT(png_cpm(inverted_adaptation), XYZ,
               &end_points))
            {
               (void)profile_error(png_ptr, NULL, name, 0,
                  "overflow unadapting colorant end-points");
               return 0;
            }

            break;
      }

      {
         png_XYZ cHRM_XYZ;

         /* Now we have colorant XYZ values in their unadapted form
          * (i.e. implicitly with an adopted white of the media).
          * This is what PNG uses for cHRM, but they need to be
          * converted to the libpng structure.
          *
          * The scaling required is 100000/0x8000, because the input
          * values have been unadapted however they may be well out of the
          * original 16-bit range, so use png_muldiv here.
          *
          *    fp = pcs * 100000 / 32768
          *       = pcs * 3125 / 1024;
          */
         if (png_muldiv(&cHRM_XYZ.red_X,  end_points[0][0], 3125, 1024) &&
            png_muldiv(&cHRM_XYZ.red_Y,   end_points[0][1], 3125, 1024) &&
            png_muldiv(&cHRM_XYZ.red_Z,   end_points[0][2], 3125, 1024) &&
            png_muldiv(&cHRM_XYZ.green_X, end_points[1][0], 3125, 1024) &&
            png_muldiv(&cHRM_XYZ.green_Y, end_points[1][1], 3125, 1024) &&
            png_muldiv(&cHRM_XYZ.green_Z, end_points[1][2], 3125, 1024) &&
            png_muldiv(&cHRM_XYZ.blue_X,  end_points[2][0], 3125, 1024) &&
            png_muldiv(&cHRM_XYZ.blue_Y,  end_points[2][1], 3125, 1024) &&
            png_muldiv(&cHRM_XYZ.blue_Z,  end_points[2][2], 3125, 1024))
         {
            png_xy xy;

            /* This function returns 0 on success: */
            if (!png_colorspace_check_XYZ(&xy, &cHRM_XYZ))
               return png_colorspace_set_xy_and_XYZ(png_ptr,
                  colorspace, &xy, &cHRM_XYZ, 0/*not preferred*/);

            /* Else the XYZ value was invalid */
            (void)profile_error(png_ptr, NULL, name, 0,
               "invalid colorant end-points");
         }

         else
            (void)profile_error(png_ptr, NULL, name, 0,
               "overflow converting colorant end-points to cHRM");
      }
   }

   return 0;
}

static int
png_icc_set_cHRM_from_clrt(png_const_structrp png_ptr,
   png_colorspacerp colorspace, png_const_charp name, png_const_bytep profile)
   /* Find the cHRM values from the colorantTableTag, if present.  The
    * colorantTableTag ('clrt')  lists the PCS values as three 16-bit integer
    * (0..65535) for each colorant.  Beause these are PCS values they have been
    * adapted to the profile color space, so the corresponding L*a*b* or XYZ
    * values may need to be converted back to the unadapted values by applying
    * the inverse of chromaticAdaptationTag.  Note that the values in the
    * colorantTableTag can also be derived directly by passing the maximum value
    * for each colorant through the AToB1Tag transformation, but this is a lot
    * more work.
    */
{
   png_uint_32 tag_length, tag_start;

   tag_start = png_find_icc_tag(profile, 0x636C7274/*'clrt'*/, &tag_length);

   if (tag_start > 0 && tag_length == 126)
   {
      /* The type is also 'clrt' (note that the tag table has already been
       * checked to ensure all tags are at least 8 bytes long!)  The checks
       * below ensure that the tag is exactly the expected size.
       */
      png_const_bytep tag = profile+tag_start;
      png_uint_32 temp = png_get_uint_32(tag+0);

      if (temp == 0x636C7274/*'clrt'*/)
      {
         temp = png_get_uint_32(tag+8);

         if (temp == 3) /* count */
         {
            int i, j;
            png_icc_matrix XYZ; /* end points, r,g,b in each row */

            /* Colorants are 38 byte structures consisting of a 32 byte
             * name followed by three two byte PCS values.  Read the three
             * values and convert PCSLAB to PCSXYZ if necessary.
             *
             *
             * NOTE: these values are (0..65535) and must be scaled to the
             * actual output range before use.  The PCSXYZ 16-bit format is
             * u1Fixed15Number in which 1,0 is 0x8000.  The PCSLAB 16-bit format
             * is somewhat more complex - see ICC 2010 (v4) 6.3.4.2
             */
            tag += 12 + 32;
            for (i=0; i<3; ++i, tag += 32) for (j=0; j<3; ++j, tag += 2)
               XYZ[i][j] = png_get_uint_16(tag);

            if ((colorspace->icc_info & PNG_ICC_PCSXYZ) != 0)
            {
               /* Convert from u1Fixed15Number to s15Fixed16Number */
               for (i=0; i<3; ++i) for (j=0; j<3; ++j)
                  XYZ[i][j] = (XYZ[i][j] << 1) + (XYZ[i][j] >> 15);
            }

            else
            {
               /* Convert from the 16 bit Lab format to 32 bit XYZ */
               /* TODO: implement this */
               png_warning(png_ptr,
                  "TODO: skipping ICC 'clrt' tag because PCS is Lab");
               return 0;
            }

            return png_icc_set_cHRM_from_endpoints(png_ptr, colorspace, name,
               profile, png_cpm(XYZ));
         }

         else
            (void)profile_error(png_ptr, NULL, name, temp,
               "invalid colorant count for ICC profile colorantTableTag");
      }

      else
         (void)profile_error(png_ptr, NULL, name, temp,
            "invalid type for ICC profile colorantTableTag");
   }

   else
      png_error(png_ptr, "lost 'clrt'");

   return 0; /* error or 'clrt' not found */
}

static int
png_icc_set_cHRM_from_MatrixTRC(png_const_structrp png_ptr,
   png_colorspacerp colorspace, png_const_charp name, png_const_bytep profile)
{
   /* The profile contains a set of RGB Matrix and TRC tags, these can be used
    * to find the colorant XYZ in the PCS encoding (which must be PCSXYZ.)
    * This is a simplistic implementation which does not run the curve (TRC)
    * part and assumes that 1,0 maps to 1,0 in the matrix (or at least to the
    * same scaled value in each case.)
    *
    * This applies to true 3-component Matrix TRC profiles and the profiles
    * produced by lcms where the MatrixColumnTag values are used in place of the
    * ColorantTableTag on non-TRC profiles, however these profiles still fail to
    * set a cHRM because the mediaWhitePointTag value is wrong (an example is
    * SA216x.icc, a scanner profile copyright Samsung for the Samnsung CLX-216x
    * scanner and with CMS type lcms).
    */
   png_icc_matrix XYZ; /* end points, r,g,b in each row */

   if (png_icc_find_XYZ(png_ptr, name, profile, 0x7258595A/*rXYZ*/, XYZ+0) &&
      png_icc_find_XYZ(png_ptr, name, profile, 0x6758595A/*gXYZ*/, XYZ+1) &&
      png_icc_find_XYZ(png_ptr, name, profile, 0x6258595A/*bXYZ*/, XYZ+2))
   {
      /* TODO: run r/g/b through the TRCs to check that the TRC transformed
       * values for 0 and 1 really are 0 and 1!
       */
      return png_icc_set_cHRM_from_endpoints(png_ptr, colorspace, name, profile,
         png_cpm(XYZ));
   }

   return 0;
}

static int
png_icc_set_cHRM_from_LUT(png_const_structrp png_ptr,
   png_colorspacerp colorspace, png_const_charp name, png_const_bytep profile)
{
   /* TODO: implement this */
   PNG_UNUSED(png_ptr)
   PNG_UNUSED(colorspace)
   PNG_UNUSED(name)
   PNG_UNUSED(profile)

   return 0;
}

int /* PRIVATE */
png_icc_check_tag_table(png_const_structrp png_ptr, png_colorspacerp colorspace,
   png_const_charp name, png_uint_32 profile_length,
   png_const_bytep profile /* header plus whole tag table */)
{
   png_uint_32 tag_count = png_get_uint_32(profile+128);
   png_uint_32 itag;
   png_const_bytep tag = profile+132; /* The first tag */
   png_uint_32 tags = colorspace->icc_info; /* Bitmask of significant tags */

   /* First scan all the tags in the table and add bits to the icc_info value
    * (temporarily in 'tags').
    */
   for (itag=0; itag < tag_count; ++itag, tag += 12)
   {
      png_uint_32 tag_id = png_get_uint_32(tag+0);
      png_uint_32 tag_start = png_get_uint_32(tag+4); /* must be aligned */
      png_uint_32 tag_length = png_get_uint_32(tag+8);/* not padded */
      png_uint_32 tag_flag = 0;

      /* The ICC specification does not exclude zero length tags, therefore the
       * start might actually be anywhere if there is no data, but this would be
       * a clear abuse of the intent of the standard so the start is checked for
       * being in range.  All defined tag types have an 8 byte header - a 4 byte
       * type signature then 0.
       */
      if ((tag_start & 3) != 0)
      {
         /* CNHP730S.icc shipped with Microsoft Windows 64 violates this, it is
          * only a warning here because libpng does not care about the
          * alignment.
          */
         (void)profile_error(png_ptr, NULL, name, tag_id,
            "ICC profile tag start not a multiple of 4");
      }

      /* Skip short tags, even if there is enough space for the type signature
       * all the types used by libpng need data.
       */
      if (tag_length < 8)
      {
         (void)profile_error(png_ptr, NULL, name, tag_id,
            "short ICC profile tag skipped");
         continue;
      }

      /* This is a hard error; potentially it can cause read outside the
       * profile.
       */
      if (tag_start > profile_length || tag_length > profile_length - tag_start)
         return profile_error(png_ptr, colorspace, name, tag_id,
            "ICC profile tag outside profile");

      /* Check the tag_id for the specific tags which must be present for the
       * profile to be valid and for those which are needed to generate cHRM and
       * gAMA values.  The errors in here are all soft; they just cause a
       * warning on read and the tag is skipped.  On write by they cause a
       * png_app_error, which the application can override.
       */
      switch (tag_id)
      {
         case 0x64657363: /* 'desc' - profileDescriptionTag */
            tags |= PNG_ICC_profileDescriptionTag;
            break;

         case 0x63707274: /* 'cprt' - copyrightTag */
            tags |= PNG_ICC_copyrightTag;
            break;

         case 0x77747074: /* 'wtpt' - mediaWhitePointTag */
            /* The length is fixed because the tag has to be an XYZType (12
             * bytes).
             */
            if (tag_length != 20)
               (void)profile_error(png_ptr, NULL, name, tag_length,
                  "invalid media white point length");

            else
               tags |= PNG_ICC_mediaWhitePointTag;
            break;

         case 0x63686164: /* 'chad' - chromaticAdaptationTag */
            /* The tag must be a 9 element array of s15Fixed16ArrayType, the tag
             * is optional, if absent it indicates that the original adapted
             * white was the same as the PCS adopted white - D50.
             */
            if (tag_length != 44)
               (void)profile_error(png_ptr, NULL, name, tag_start,
                  "invalid chromatic adaptation matrix length");

            else
               tags |= PNG_ICC_chromaticAdaptationTag;
            break;

         case 0x7258595A: /* 'rXYZ' - redMatrixColumnTag */
            tag_flag = PNG_ICC_redMatrixColumnTag;
            goto check_MatrixColumnTag_length;

         case 0x6758595A: /* 'gXYZ' - greenMatrixColumnTag */
            tag_flag = PNG_ICC_greenMatrixColumnTag;
            goto check_MatrixColumnTag_length;

         case 0x6258595A: /* 'bXYZ' - blueMatrixColumnTag */
            tag_flag = PNG_ICC_blueMatrixColumnTag;
            goto check_MatrixColumnTag_length;

         check_MatrixColumnTag_length:
            /* Tag must be an XYZType with one XYZNumber element, the PCS
             * encoding should be PCSXYZ, however lcms seems to use these tags
             * to record the end-point XYZ (i.e. it is using MatrixColumnTag in
             * place of colorantTableTag!)  This is probably eroneous but is not
             * clearly outlawed by the specification.
             */
            if (tag_length != 20)
               (void)profile_error(png_ptr, NULL, name, tag_id,
                  "invalid <rgb>MatrixColumnTag length");

            else if (!(tags & PNG_ICC_RGB))
               (void)profile_error(png_ptr, NULL, name, tag_id,
                  "invalid <rgb>MatrixColumnTag on monochrome profile");

            else
               tags |= tag_flag;
            break;

         case 0x72545243: /* 'rTRC' - redTRCTag */
            tag_flag = PNG_ICC_redTRCTag;
            goto check_rgbTRCTag_encoding;

         case 0x67545243: /* 'gTRC' - greenTRCTag */
            tag_flag = PNG_ICC_greenTRCTag;
            goto check_rgbTRCTag_encoding;

         case 0x62545243: /* 'bTRC' - blueTRCTag */
            tag_flag = PNG_ICC_blueTRCTag;
            goto check_rgbTRCTag_encoding;

         check_rgbTRCTag_encoding:
            /* The TRCTags feed into the MatrixColumnTag matrix and this is
             * never going to work if the encoding is PCSLAB, so disallow the
             * TRC tags here.  The MatrixColumnTags are still accumulated, this
             * requires special handling below.
             */
            if (!(tags & PNG_ICC_RGB))
               (void)profile_error(png_ptr, NULL, name, tag_id,
                  "invalid <rgb>TRCTag on monochrome profile");

            else if (!(tags & PNG_ICC_PCSXYZ))
               (void)profile_error(png_ptr, NULL, name, tag_id,
                  "invalid <rgb>TRCTag (requires PCSXYZ encoding)");

            else
               goto check_TRCTag_length;

            break; /* skip on error */

         case 0x6B545243: /* 'kTRC' - grayTRCTag */
            if ((tags & PNG_ICC_RGB) != 0)
               (void)profile_error(png_ptr, NULL, name, tag_id,
                  "invalid grayTRCTag on RGB profile");

            else
            {
               tag_flag = PNG_ICC_grayTRCTag;
               goto check_TRCTag_length;
            }

            break; /* skip on error */

         check_TRCTag_length:
            /* Permitted types are curveType or parametricCurveType, curveType
             * is shortest, only 12 bytes for an identity response.
             */
            if (tag_length < 12)
               (void)profile_error(png_ptr, NULL, name, tag_id,
                  "invalid <rgbk>TRCTag length");

            else
               tags |= tag_flag;
            break;

         case 0x41324230: /* 'A2B0' - AToB0Tag */
            tag_flag = PNG_ICC_AToB0Tag;
            goto check_AToBxTag_length;

         case 0x42324130: /* 'B2A0' - BToA0Tag */
            tag_flag = PNG_ICC_BToA0Tag;
            goto check_AToBxTag_length;

         case 0x41324231: /* 'A2B1' - AToB1Tag */
            tag_flag = PNG_ICC_AToB1Tag;
            goto check_AToBxTag_length;

         case 0x42324131: /* 'B2A1' - BToA1Tag */
            tag_flag = PNG_ICC_BToA1Tag;
            goto check_AToBxTag_length;

         case 0x41324232: /* 'A2B2' - AToB2Tag */
            tag_flag = PNG_ICC_AToB2Tag;
            goto check_AToBxTag_length;

         case 0x42324132: /* 'B2A2' - BToA2Tag */
            tag_flag = PNG_ICC_BToA2Tag;
            goto check_AToBxTag_length;

         check_AToBxTag_length:
            /* Permitted types are lut8Type, lut16Type and one or other of
             * lutAToBType or lutBToAType (which are the same length.)  The
             * CLUT forms have a 32 byte header, the headers on the others are
             * longer.  In fact all need more data than this in practice.
             */
            if (tag_length < 32)
               (void)profile_error(png_ptr, NULL, name, tag_id,
                  "invalid LUT Tag length");

            else
               tags |= tag_flag;
            break;

            /* NOTE: the DToB and BToD tags, while permitted, cannot be used on
             * PNG data because it can never be floating point.
             */

         case 0x6368726D: /* 'chrm' - chromaticityTag */
            /* May exist for RGB or GRAY color spaces and this determines the
             * number of channels, the permitted type is chromaticityType.
             */
            if (tag_length != 12 + 8*PNG_ICC_CHANNELS(tags))
               (void)profile_error(png_ptr, NULL, name, tag_id,
                  "invalid chromaticityTag length");

            else
               tags |= PNG_ICC_chromaticityTag;
            break;

         case 0x636C7274: /* 'clrt' - colorantTableTag */
            /* The permitted type is colorantTableType and the number of
             * colorants are determined by the number of channels, as above.
             */
            if (tag_length != 12 + 38*PNG_ICC_CHANNELS(tags))
               (void)profile_error(png_ptr, NULL, name, tag_id,
                  "invalid colorantTableTag length");

            else
               tags |= PNG_ICC_colorantTableTag;
            break;

         case 0x67616D74: /* 'gamt' - gamutTag */
            /* The permitted types are lut8Type, lut16Type or lutBToAType
             * (required by output LUT based profiles.)
             */
            tag_flag = PNG_ICC_gamutTag;
            goto check_AToBxTag_length;

         default:
            break;
      }
   }

   /* Cache the list of found tags for use later */
   colorspace->icc_info = tags;

   /* The required tags depend on the profile class and, within the class,
    * the type of profile - N-component LUT based ('LUT'), Three-component
    * matrix-based ('RGB Matrix'), or monochrome ('monochrome').
    *
    * All profiles except DeviceLink profiles require PNG_ICC_REQUIRED_ALL.
    */
   {
      png_uint_32 profile_class = png_get_uint_32(profile+12);
      png_uint_32 required_tags = PNG_ICC_REQUIRED_BASE;
      png_uint_32 permitted_tags = ~PNG_ICC_ALL_TRC; /* LUT based */
      int LUT_based = 1;

      /* Work out a profile independent setting then update this below if the
       * profile had different requirements.
       */
      if (tags & PNG_ICC_ALL_TRC)
      {
         /* A TRCTag is present, check the colorspace to find out what is
          * permitted and required.
          */
         if (tags & PNG_ICC_RGB) /* 3-component */
         {
            required_tags |= PNG_ICC_REQUIRED_RGB_MATRIXTRC;
            permitted_tags |= PNG_ICC_REQUIRED_RGB_MATRIXTRC;
         }

         else /* monochrome */
         {
            required_tags |= PNG_ICC_grayTRCTag;
            permitted_tags |= PNG_ICC_grayTRCTag;
         }

         LUT_based = 0;
      }

      else
      {
         /* No MatrixTRC - must be LUT based, the AToB0Tag is required */
         required_tags |= PNG_ICC_AToB0Tag;
      }

      switch (profile_class)
      {
         case 0x73636E72: /* 'scnr' - the input profile class */
            /* All conditions match the default. */
            break;

         case 0x6D6E7472: /* 'mntr' - a display device profile */
            /* On a monitor profile the N-Component LUT-based profiles require a
             * BToA0 tag.
             */
            if (LUT_based)
               required_tags |= PNG_ICC_BToA0Tag;

            break;

         case 0x70727472: /* 'prtr' - an output device profile */
            /* For output profiles the three-component matrix based variant is
             * not permitted, and all the various LUT-based tags are required.
             * For LUT based profiles the colorantTableTag is only required for
             * xCLR profiles, which have already been excluded.
             */
            if (LUT_based)
               required_tags |= PNG_ICC_ALL_LUT | PNG_ICC_gamutTag;

            else
               permitted_tags &= ~PNG_ICC_REQUIRED_RGB_MATRIXTRC;

            break;

         case 0x6C696E6B: /* 'link' */
         case 0x61627374: /* 'abst' */
            /* Already excluded, but for reference: */
            required_tags |= PNG_ICC_AToB0Tag;
            /* 'link' + PNG_ICC_profileSequenceDescTag */
            permitted_tags &= ~(PNG_ICC_ALL_TRC | PNG_ICC_ALL_LUT);
            permitted_tags |= PNG_ICC_AToB0Tag;
            break;

         case 0x73706163: /* 'spac' */
            /* The Matrix/TRC tags are not permitted on color-space profiles,
             * and BToA0 must be present.
             */
            required_tags |= PNG_ICC_AToB0Tag | PNG_ICC_BToA0Tag;
            permitted_tags &= ~PNG_ICC_ALL_TRC;
            break;

         case 0x6E6D636C: /* 'nmcl' */
            /* Not supported at all. */
            required_tags = PNG_ICC_REQUIRED_BASE;
            permitted_tags = PNG_ICC_REQUIRED_BASE;
            break;

         default:
            /* To allow for future expansion just use the base input device
             * settings.
             */
            break;
      }

      /* Then the test is that all the required tags are present and all the
       * present tags are permitted.  The warning message is somewhat difficult
       * to decode, however occurences are extremely rare.  Note that tags which
       * were previously detected to be invalid won't be in the 'tags'
       * information and will probably result in a second warning here.
       */
      if ((required_tags & ~tags) != 0)
         (void)profile_error(png_ptr, NULL, name, (required_tags & ~tags),
            "required tags missing");

      if ((tags & ~permitted_tags) != 0)
         (void)profile_error(png_ptr, NULL, name, (tags & ~permitted_tags),
            "unpermitted tags present");
   }

   return 1; /* success, maybe with warnings */
}

#ifdef PNG_sRGB_SUPPORTED
/* Information about the known ICC sRGB profiles */
static const struct
{
   png_uint_32 adler, crc, length;
   png_uint_32 md5[4];
   png_byte    have_md5;
   png_byte    is_broken;
   png_uint_16 intent;

#  define PNG_MD5(a,b,c,d) { a, b, c, d }, (a!=0)||(b!=0)||(c!=0)||(d!=0)
#  define PNG_ICC_CHECKSUM(adler, crc, md5, intent, broke, date, length, fname)\
      { adler, crc, length, md5, broke, intent },

} png_sRGB_checks[] =
{
   /* This data comes from contrib/tools/checksum-icc run on downloads of
    * all four ICC sRGB profiles from www.color.org.
    */
   /* adler32, crc32, MD5[4], intent, date, length, file-name */
   PNG_ICC_CHECKSUM(0x0a3fd9f6, 0x3b8772b9,
      PNG_MD5(0x29f83dde, 0xaff255ae, 0x7842fae4, 0xca83390d), 0, 0,
      "2009/03/27 21:36:31", 3048, "sRGB_IEC61966-2-1_black_scaled.icc")

   /* ICC sRGB v2 perceptual no black-compensation: */
   PNG_ICC_CHECKSUM(0x4909e5e1, 0x427ebb21,
      PNG_MD5(0xc95bd637, 0xe95d8a3b, 0x0df38f99, 0xc1320389), 1, 0,
      "2009/03/27 21:37:45", 3052, "sRGB_IEC61966-2-1_no_black_scaling.icc")

   PNG_ICC_CHECKSUM(0xfd2144a1, 0x306fd8ae,
      PNG_MD5(0xfc663378, 0x37e2886b, 0xfd72e983, 0x8228f1b8), 0, 0,
      "2009/08/10 17:28:01", 60988, "sRGB_v4_ICC_preference_displayclass.icc")

   /* ICC sRGB v4 perceptual */
   PNG_ICC_CHECKSUM(0x209c35d2, 0xbbef7812,
      PNG_MD5(0x34562abf, 0x994ccd06, 0x6d2c5721, 0xd0d68c5d), 0, 0,
      "2007/07/25 00:05:37", 60960, "sRGB_v4_ICC_preference.icc")

   /* The following profiles have no known MD5 checksum. If there is a match
    * on the (empty) MD5 the other fields are used to attempt a match and
    * a warning is produced.  The first two of these profiles have a 'cprt' tag
    * which suggests that they were also made by Hewlett Packard.
    */
   PNG_ICC_CHECKSUM(0xa054d762, 0x5d5129ce,
      PNG_MD5(0x00000000, 0x00000000, 0x00000000, 0x00000000), 1, 0,
      "2004/07/21 18:57:42", 3024, "sRGB_IEC61966-2-1_noBPC.icc")

   /* This is a 'mntr' (display) profile with a mediaWhitePointTag that does not
    * match the D50 PCS illuminant in the header (it is in fact the D65 values,
    * so the white point is recorded as the un-adapted value.)  The profiles
    * below only differ in one byte - the intent - and are basically the same as
    * the previous profile except for the mediaWhitePointTag error and a missing
    * chromaticAdaptationTag.
    */
   PNG_ICC_CHECKSUM(0xf784f3fb, 0x182ea552,
      PNG_MD5(0x00000000, 0x00000000, 0x00000000, 0x00000000), 0, 1/*broken*/,
      "1998/02/09 06:49:00", 3144, "HP-Microsoft sRGB v2 perceptual")

   PNG_ICC_CHECKSUM(0x0398f3fcUL, 0xf29e526dUL,
      PNG_MD5(0x00000000, 0x00000000, 0x00000000, 0x00000000), 1, 1/*broken*/,
      "1998/02/09 06:49:00", 3144, "HP-Microsoft sRGB v2 media-relative")
};

static int
png_compare_ICC_profile_with_sRGB(png_const_structrp png_ptr,
   png_const_bytep profile, uLong adler)
{
   /* The quick check is to verify just the MD5 signature and trust the
    * rest of the data.  Because the profile has already been verified for
    * correctness this is safe.  png_colorspace_set_sRGB will check the 'intent'
    * field too, so if the profile has been edited with an intent not defined
    * by sRGB (but maybe defined by a later ICC specification) the read of
    * the profile will fail at that point.
    */
   png_uint_32 length = 0;
   png_uint_32 intent = 0x10000; /* invalid */
#if PNG_sRGB_PROFILE_CHECKS > 1
   uLong crc = 0; /* the value for 0 length data */
#endif
   unsigned int i;

   for (i=0; i < (sizeof png_sRGB_checks) / (sizeof png_sRGB_checks[0]); ++i)
   {
      if (png_get_uint_32(profile+84) == png_sRGB_checks[i].md5[0] &&
          png_get_uint_32(profile+88) == png_sRGB_checks[i].md5[1] &&
          png_get_uint_32(profile+92) == png_sRGB_checks[i].md5[2] &&
         png_get_uint_32(profile+96) == png_sRGB_checks[i].md5[3])
      {
         /* This may be one of the old HP profiles without an MD5, in that
          * case we can only use the length and Adler32 (note that these
          * are not used by default if there is an MD5!)
          */
#        if PNG_sRGB_PROFILE_CHECKS == 0
            if (png_sRGB_checks[i].have_md5)
               return 1+png_sRGB_checks[i].is_broken;
#        endif

         /* Profile is unsigned or more checks have been configured in. */
         if (length == 0)
         {
            length = png_get_uint_32(profile);
            intent = png_get_uint_32(profile+64);
         }

         /* Length *and* intent must match */
         if (length == png_sRGB_checks[i].length &&
            intent == png_sRGB_checks[i].intent)
         {
            /* Now calculate the alder32 if not done already. */
            if (adler == 0)
            {
               adler = adler32(0, NULL, 0);
               adler = adler32(adler, profile, length);
            }

            if (adler == png_sRGB_checks[i].adler)
            {
               /* These basic checks suggest that the data has not been
                * modified, but if the check level is more than 1 perform
                * our own crc32 checksum on the data.
                */
#              if PNG_sRGB_PROFILE_CHECKS > 1
                  if (crc == 0)
                  {
                     crc = crc32(0, NULL, 0);
                     crc = crc32(crc, profile, length);
                  }

                  /* So this check must pass for the 'return' below to happen.
                   */
                  if (crc == png_sRGB_checks[i].crc)
#              endif
               {
                  if (png_sRGB_checks[i].is_broken)
                  {
                     /* These profiles are known to have bad data that may cause
                      * problems if they are used, therefore attempt to
                      * discourage their use, skip the 'have_md5' warning below,
                      * which is made irrelevant by this error.
                      */
#                    ifdef PNG_READ_SUPPORTED
                        if (png_ptr->mode & PNG_IS_READ_STRUCT)
                           png_chunk_benign_error(png_ptr,
                              "known incorrect sRGB profile");
                        else
#                    endif
                     png_app_error(png_ptr,
                        "known incorrect sRGB profile");
                  }

                  /* Warn that this being done; this isn't even an error since
                   * the profile is perfectly valid, but it would be nice if
                   * people used the up-to-date ones.
                   */
                  else if (!png_sRGB_checks[i].have_md5)
                  {
#                    ifdef PNG_READ_SUPPORTED
                        if (png_ptr->mode & PNG_IS_READ_STRUCT)
                           png_chunk_warning(png_ptr,
                              "out-of-date sRGB profile with no signature");
                        else
#                    endif
                     png_app_warning(png_ptr,
                        "out-of-date sRGB profile with no signature");
                  }

                  return 1+png_sRGB_checks[i].is_broken;
               }
            }
         }

#        if PNG_sRGB_PROFILE_CHECKS > 0
            /* The signature matched, but the profile had been changed in some
             * way.  This is an apparent violation of the ICC terms of use and,
             * anyway, probably indicates a data error or uninformed hacking.
             */
            if (png_sRGB_checks[i].have_md5)
               png_benign_error(png_ptr,
                  "copyright violation: edited ICC profile ignored");
#        endif
      }
   }

   return 0; /* no match */
}
#endif

int /* PRIVATE */
png_icc_set_gAMA_and_cHRM(png_const_structrp png_ptr,
   png_colorspacerp colorspace, png_const_charp name, png_const_bytep profile,
   uLong adler)
{
   int set;
   png_uint_32 info;

#  ifdef PNG_sRGB_SUPPORTED
      /* 1) Is this profile one of the known ICC sRGB profiles?  If it is, just
       *    set the sRGB information.
       */
      set = png_compare_ICC_profile_with_sRGB(png_ptr, profile, adler);

      if (set)
      {
         /* It is, simply set the profile intent. */
         int done = png_colorspace_set_sRGB(png_ptr, colorspace,
            (int)/*already checked*/png_get_uint_32(profile+64),
            0/* check gAMA and cHRM against sRGB but do not override */);

         /* Stop here on error */
         if (!done)
            return done;

#        if PNG_LIBPNG_BUILD_BASE_TYPE < PNG_LIBPNG_BUILD_RC
            /* In pre-RC builds run sRGB profiles through the profile checking
             * code; this is because it is a useful validation of that code and
             * because there is some evidence that not all sRGB profiles are
             * created alike.  Don't do this for the known-broken sRGB profiles,
             * it just produces extra errors.  (So this looks a little
             * confusing; if set is '1', a believed-ok sRGB profile, continue
             * checking, but if it '2' or more stop here.
             */
            if (set >= 2)
#        endif
            return set;
      }
#  endif

   /* 2) Attempt to extract the gAMA and cHRM information from non-sRGB
    *    profiles.  Always set the rendering intent from the profile.
    */
   info = colorspace->icc_info;

   /* The cHRM chunk is only useful for an RGB image/profile, note that the
    * check on 'set' causes pre-RC builds to do a spurious check on sRGB
    * profiles, this validates the libpng algorithms because the known sRGB
    * profiles are known to be correct.
    */
   if ((info & PNG_ICC_RGB) != 0 &&
      (set || (colorspace->flags & PNG_COLORSPACE_HAVE_ENDPOINTS) == 0))
   {
      /* There are three ways to determine the correct value for cHRM, in order
       * of preference they are:
       *
       * 1) Use 'chrm' - the chromaticityTag - if present for the colorant
       *    chromaticities and combine this with the chromaticity of the media
       *    white point (unadapted).
       * 2) Use 'clrt' - the colorantTableTag - if present; reverse the
       *    adaptation of the colorant end points the PCS illuminant and
       *    use the XYZ values so obtained to set the cHRM values.
       * 3) Use the XYZ values of the colorant obtained following section 10.4
       *    of the ICC 2010 (v4) specification in the 'EXAMPLE' paragraph.  The
       *    specification states that the AToB1Tag should be used, but the
       *    Matrix TRC method is also colorimetric (see Table 25) and works in
       *    older profiles too.
       *
       * For methods (2) and (3) the mediaWhitePointTag provides a check - it
       * should match the sum of the adapted colorant end points.
       */
      if ((info & (PNG_ICC_chromaticityTag|PNG_ICC_mediaWhitePointTag)) ==
            (PNG_ICC_chromaticityTag|PNG_ICC_mediaWhitePointTag) &&
         png_icc_set_cHRM_from_chrm(png_ptr, colorspace, name, profile))
      {
         /* finished */
      }

      else if ((info & PNG_ICC_colorantTableTag) != 0 &&
         png_icc_set_cHRM_from_clrt(png_ptr, colorspace, name, profile))
      {
         /* finished */
      }

      /* (3): divided into two caes, where we have the MatrixColumnTags for all
       * columns of the Matrix (and may have TRC tags too) as opposed to the
       * case where the AToB LUT has to be used.
       *
       * At present only do this if the full set of TRC *and* MatrixColumn tags
       * are present.  The code will handle the case where there is just the
       * MatrixColumn set, and some lcms profiles have MatrixColumn but no TRC,
       * but this seems to be erroneous (the result does not match the
       * mediaWhitePointTag.)
       */
      else if ((info & PNG_ICC_REQUIRED_RGB_MATRIXTRC) ==
            PNG_ICC_REQUIRED_RGB_MATRIXTRC &&
         png_icc_set_cHRM_from_MatrixTRC(png_ptr, colorspace, name, profile))
      {
         /* finished */
      }

      else if ((info & PNG_ICC_AToB_TAGS) != 0 &&
         png_icc_set_cHRM_from_LUT(png_ptr, colorspace, name, profile))
      {
         /* finished */
      }
   } /* 'RGB ' profile */

   /* TODO: implement discovery of gAMA. */

   /* Only write the intent if there is no other setting; the intent recorded in
    * the profile is somewhat curious since the profile can have support for
    * several intents.
    */
   if ((colorspace->flags & PNG_COLORSPACE_HAVE_INTENT) == 0)
   {
      colorspace->rendering_intent = (png_uint_16)/*already checked*/
         png_get_uint_32(profile+64);
      colorspace->flags |= PNG_COLORSPACE_HAVE_INTENT;
      set = 2;
   }

   return set;
}

int /* PRIVATE */
png_colorspace_set_ICC(png_const_structrp png_ptr, png_colorspacerp colorspace,
   png_const_charp name, png_uint_32 profile_length, png_const_bytep profile,
   int color_type)
{
   if (colorspace->flags & PNG_COLORSPACE_INVALID)
      return 0;

   if (png_icc_check_length(png_ptr, colorspace, name, profile_length) &&
      png_icc_check_header(png_ptr, colorspace, name, profile_length, profile,
         color_type) &&
      png_icc_check_tag_table(png_ptr, colorspace, name, profile_length,
         profile))
   {
      png_icc_set_gAMA_and_cHRM(png_ptr, colorspace, name, profile, 0);
      return 1;
   }

   /* Failure case */
   return 0;
}
#endif /* iCCP */

#ifdef PNG_READ_RGB_TO_GRAY_SUPPORTED
void /* PRIVATE */
png_colorspace_set_rgb_coefficients(png_structrp png_ptr)
{
   /* Set the rgb_to_gray coefficients from the colorspace. */
   if (!png_ptr->rgb_to_gray_coefficients_set &&
      (png_ptr->colorspace.flags & PNG_COLORSPACE_HAVE_ENDPOINTS) != 0)
   {
      /* png_set_background has not been called, get the coefficients from the Y
       * values of the colorspace colorants.
       */
      png_fixed_point r = png_ptr->colorspace.end_points_XYZ.red_Y;
      png_fixed_point g = png_ptr->colorspace.end_points_XYZ.green_Y;
      png_fixed_point b = png_ptr->colorspace.end_points_XYZ.blue_Y;
      png_fixed_point total = r+g+b;

      if (total > 0 &&
         r >= 0 && png_muldiv(&r, r, 32768, total) && r >= 0 && r <= 32768 &&
         g >= 0 && png_muldiv(&g, g, 32768, total) && g >= 0 && g <= 32768 &&
         b >= 0 && png_muldiv(&b, b, 32768, total) && b >= 0 && b <= 32768 &&
         r+g+b <= 32769)
      {
         /* We allow 0 coefficients here.  r+g+b may be 32769 if two or
          * all of the coefficients were rounded up.  Handle this by
          * reducing the *largest* coefficient by 1; this matches the
          * approach used for the default coefficients in pngrtran.c
          */
         int add = 0;

         if (r+g+b > 32768)
            add = -1;
         else if (r+g+b < 32768)
            add = 1;

         if (add != 0)
         {
            if (g >= r && g >= b)
               g += add;
            else if (r >= g && r >= b)
               r += add;
            else
               b += add;
         }

         /* Check for an internal error. */
         if (r+g+b != 32768)
            png_error(png_ptr,
               "internal error handling cHRM coefficients");

         else
         {
            png_ptr->rgb_to_gray_red_coeff   = (png_uint_16)r;
            png_ptr->rgb_to_gray_green_coeff = (png_uint_16)g;
         }
      }

      /* This is a png_error at present even though it could be ignored -
       * it should never happen, but it is important that if it does, the
       * bug is fixed.
       */
      else
         png_error(png_ptr, "internal error handling cHRM->XYZ");
   }
}
#endif

#endif /* COLORSPACE */

void /* PRIVATE */
png_check_IHDR(png_const_structrp png_ptr,
   png_uint_32 width, png_uint_32 height, int bit_depth,
   int color_type, int interlace_type, int compression_type,
   int filter_type)
{
   int error = 0;

   /* Check for width and height valid values */
   if (width == 0)
   {
      png_warning(png_ptr, "Image width is zero in IHDR");
      error = 1;
   }

   if (height == 0)
   {
      png_warning(png_ptr, "Image height is zero in IHDR");
      error = 1;
   }

#  ifdef PNG_SET_USER_LIMITS_SUPPORTED
   if (width > png_ptr->user_width_max)

#  else
   if (width > PNG_USER_WIDTH_MAX)
#  endif
   {
      png_warning(png_ptr, "Image width exceeds user limit in IHDR");
      error = 1;
   }

#  ifdef PNG_SET_USER_LIMITS_SUPPORTED
   if (height > png_ptr->user_height_max)
#  else
   if (height > PNG_USER_HEIGHT_MAX)
#  endif
   {
      png_warning(png_ptr, "Image height exceeds user limit in IHDR");
      error = 1;
   }

   if (width > PNG_UINT_31_MAX)
   {
      png_warning(png_ptr, "Invalid image width in IHDR");
      error = 1;
   }

   if (height > PNG_UINT_31_MAX)
   {
      png_warning(png_ptr, "Invalid image height in IHDR");
      error = 1;
   }

   if (width > (PNG_UINT_32_MAX
                 >> 3)      /* 8-byte RGBA pixels */
                 - 48       /* bigrowbuf hack */
                 - 1        /* filter byte */
                 - 7*8      /* rounding of width to multiple of 8 pixels */
                 - 8)       /* extra max_pixel_depth pad */
      png_warning(png_ptr, "Width is too large for libpng to process pixels");

   /* Check other values */
   if (bit_depth != 1 && bit_depth != 2 && bit_depth != 4 &&
       bit_depth != 8 && bit_depth != 16)
   {
      png_warning(png_ptr, "Invalid bit depth in IHDR");
      error = 1;
   }

   if (color_type < 0 || color_type == 1 ||
       color_type == 5 || color_type > 6)
   {
      png_warning(png_ptr, "Invalid color type in IHDR");
      error = 1;
   }

   if (((color_type == PNG_COLOR_TYPE_PALETTE) && bit_depth > 8) ||
       ((color_type == PNG_COLOR_TYPE_RGB ||
         color_type == PNG_COLOR_TYPE_GRAY_ALPHA ||
         color_type == PNG_COLOR_TYPE_RGB_ALPHA) && bit_depth < 8))
   {
      png_warning(png_ptr, "Invalid color type/bit depth combination in IHDR");
      error = 1;
   }

   if (interlace_type >= PNG_INTERLACE_LAST)
   {
      png_warning(png_ptr, "Unknown interlace method in IHDR");
      error = 1;
   }

   if (compression_type != PNG_COMPRESSION_TYPE_BASE)
   {
      png_warning(png_ptr, "Unknown compression method in IHDR");
      error = 1;
   }

#  ifdef PNG_MNG_FEATURES_SUPPORTED
   /* Accept filter_method 64 (intrapixel differencing) only if
    * 1. Libpng was compiled with PNG_MNG_FEATURES_SUPPORTED and
    * 2. Libpng did not read a PNG signature (this filter_method is only
    *    used in PNG datastreams that are embedded in MNG datastreams) and
    * 3. The application called png_permit_mng_features with a mask that
    *    included PNG_FLAG_MNG_FILTER_64 and
    * 4. The filter_method is 64 and
    * 5. The color_type is RGB or RGBA
    */
   if ((png_ptr->mode & PNG_HAVE_PNG_SIGNATURE) &&
       png_ptr->mng_features_permitted)
      png_warning(png_ptr, "MNG features are not allowed in a PNG datastream");

   if (filter_type != PNG_FILTER_TYPE_BASE)
   {
      if (!((png_ptr->mng_features_permitted & PNG_FLAG_MNG_FILTER_64) &&
          (filter_type == PNG_INTRAPIXEL_DIFFERENCING) &&
          ((png_ptr->mode & PNG_HAVE_PNG_SIGNATURE) == 0) &&
          (color_type == PNG_COLOR_TYPE_RGB ||
          color_type == PNG_COLOR_TYPE_RGB_ALPHA)))
      {
         png_warning(png_ptr, "Unknown filter method in IHDR");
         error = 1;
      }

      if (png_ptr->mode & PNG_HAVE_PNG_SIGNATURE)
      {
         png_warning(png_ptr, "Invalid filter method in IHDR");
         error = 1;
      }
   }

#  else
   if (filter_type != PNG_FILTER_TYPE_BASE)
   {
      png_warning(png_ptr, "Unknown filter method in IHDR");
      error = 1;
   }
#  endif

   if (error == 1)
      png_error(png_ptr, "Invalid IHDR data");
}

#if defined(PNG_sCAL_SUPPORTED) || defined(PNG_pCAL_SUPPORTED)
/* ASCII to fp functions */
/* Check an ASCII formated floating point value, see the more detailed
 * comments in pngpriv.h
 */
/* The following is used internally to preserve the sticky flags */
#define png_fp_add(state, flags) ((state) |= (flags))
#define png_fp_set(state, value) ((state) = (value) | ((state) & PNG_FP_STICKY))

int /* PRIVATE */
png_check_fp_number(png_const_charp string, png_size_t size, int *statep,
   png_size_tp whereami)
{
   int state = *statep;
   png_size_t i = *whereami;

   while (i < size)
   {
      int type;
      /* First find the type of the next character */
      switch (string[i])
      {
      case 43:  type = PNG_FP_SAW_SIGN;                   break;
      case 45:  type = PNG_FP_SAW_SIGN + PNG_FP_NEGATIVE; break;
      case 46:  type = PNG_FP_SAW_DOT;                    break;
      case 48:  type = PNG_FP_SAW_DIGIT;                  break;
      case 49: case 50: case 51: case 52:
      case 53: case 54: case 55: case 56:
      case 57:  type = PNG_FP_SAW_DIGIT + PNG_FP_NONZERO; break;
      case 69:
      case 101: type = PNG_FP_SAW_E;                      break;
      default:  goto PNG_FP_End;
      }

      /* Now deal with this type according to the current
       * state, the type is arranged to not overlap the
       * bits of the PNG_FP_STATE.
       */
      switch ((state & PNG_FP_STATE) + (type & PNG_FP_SAW_ANY))
      {
      case PNG_FP_INTEGER + PNG_FP_SAW_SIGN:
         if (state & PNG_FP_SAW_ANY)
            goto PNG_FP_End; /* not a part of the number */

         png_fp_add(state, type);
         break;

      case PNG_FP_INTEGER + PNG_FP_SAW_DOT:
         /* Ok as trailer, ok as lead of fraction. */
         if (state & PNG_FP_SAW_DOT) /* two dots */
            goto PNG_FP_End;

         else if (state & PNG_FP_SAW_DIGIT) /* trailing dot? */
            png_fp_add(state, type);

         else
            png_fp_set(state, PNG_FP_FRACTION | type);

         break;

      case PNG_FP_INTEGER + PNG_FP_SAW_DIGIT:
         if (state & PNG_FP_SAW_DOT) /* delayed fraction */
            png_fp_set(state, PNG_FP_FRACTION | PNG_FP_SAW_DOT);

         png_fp_add(state, type | PNG_FP_WAS_VALID);

         break;

      case PNG_FP_INTEGER + PNG_FP_SAW_E:
         if ((state & PNG_FP_SAW_DIGIT) == 0)
            goto PNG_FP_End;

         png_fp_set(state, PNG_FP_EXPONENT);

         break;

   /* case PNG_FP_FRACTION + PNG_FP_SAW_SIGN:
         goto PNG_FP_End; ** no sign in fraction */

   /* case PNG_FP_FRACTION + PNG_FP_SAW_DOT:
         goto PNG_FP_End; ** Because SAW_DOT is always set */

      case PNG_FP_FRACTION + PNG_FP_SAW_DIGIT:
         png_fp_add(state, type | PNG_FP_WAS_VALID);
         break;

      case PNG_FP_FRACTION + PNG_FP_SAW_E:
         /* This is correct because the trailing '.' on an
          * integer is handled above - so we can only get here
          * with the sequence ".E" (with no preceding digits).
          */
         if ((state & PNG_FP_SAW_DIGIT) == 0)
            goto PNG_FP_End;

         png_fp_set(state, PNG_FP_EXPONENT);

         break;

      case PNG_FP_EXPONENT + PNG_FP_SAW_SIGN:
         if (state & PNG_FP_SAW_ANY)
            goto PNG_FP_End; /* not a part of the number */

         png_fp_add(state, PNG_FP_SAW_SIGN);

         break;

   /* case PNG_FP_EXPONENT + PNG_FP_SAW_DOT:
         goto PNG_FP_End; */

      case PNG_FP_EXPONENT + PNG_FP_SAW_DIGIT:
         png_fp_add(state, PNG_FP_SAW_DIGIT | PNG_FP_WAS_VALID);

         break;

   /* case PNG_FP_EXPONEXT + PNG_FP_SAW_E:
         goto PNG_FP_End; */

      default: goto PNG_FP_End; /* I.e. break 2 */
      }

      /* The character seems ok, continue. */
      ++i;
   }

PNG_FP_End:
   /* Here at the end, update the state and return the correct
    * return code.
    */
   *statep = state;
   *whereami = i;

   return (state & PNG_FP_SAW_DIGIT) != 0;
}


/* The same but for a complete string. */
int
png_check_fp_string(png_const_charp string, png_size_t size)
{
   int        state=0;
   png_size_t char_index=0;

   if (png_check_fp_number(string, size, &state, &char_index) &&
      (char_index == size || string[char_index] == 0))
      return state /* must be non-zero - see above */;

   return 0; /* i.e. fail */
}
#endif /* pCAL or sCAL */

#ifdef PNG_sCAL_SUPPORTED
#  ifdef PNG_FLOATING_POINT_SUPPORTED
/* Utility used below - a simple accurate power of ten from an integral
 * exponent.
 */
static double
png_pow10(int power)
{
   int recip = 0;
   double d = 1;

   /* Handle negative exponent with a reciprocal at the end because
    * 10 is exact whereas .1 is inexact in base 2
    */
   if (power < 0)
   {
      if (power < DBL_MIN_10_EXP) return 0;
      recip = 1, power = -power;
   }

   if (power > 0)
   {
      /* Decompose power bitwise. */
      double mult = 10;
      do
      {
         if (power & 1) d *= mult;
         mult *= mult;
         power >>= 1;
      }
      while (power > 0);

      if (recip) d = 1/d;
   }
   /* else power is 0 and d is 1 */

   return d;
}

/* Function to format a floating point value in ASCII with a given
 * precision.
 */
void /* PRIVATE */
png_ascii_from_fp(png_const_structrp png_ptr, png_charp ascii, png_size_t size,
    double fp, unsigned int precision)
{
   /* We use standard functions from math.h, but not printf because
    * that would require stdio.  The caller must supply a buffer of
    * sufficient size or we will png_error.  The tests on size and
    * the space in ascii[] consumed are indicated below.
    */
   if (precision < 1)
      precision = DBL_DIG;

   /* Enforce the limit of the implementation precision too. */
   if (precision > DBL_DIG+1)
      precision = DBL_DIG+1;

   /* Basic sanity checks */
   if (size >= precision+5) /* See the requirements below. */
   {
      if (fp < 0)
      {
         fp = -fp;
         *ascii++ = 45; /* '-'  PLUS 1 TOTAL 1 */
         --size;
      }

      if (fp >= DBL_MIN && fp <= DBL_MAX)
      {
         int exp_b10;       /* A base 10 exponent */
         double base;   /* 10^exp_b10 */

         /* First extract a base 10 exponent of the number,
          * the calculation below rounds down when converting
          * from base 2 to base 10 (multiply by log10(2) -
          * 0.3010, but 77/256 is 0.3008, so exp_b10 needs to
          * be increased.  Note that the arithmetic shift
          * performs a floor() unlike C arithmetic - using a
          * C multiply would break the following for negative
          * exponents.
          */
         (void)frexp(fp, &exp_b10); /* exponent to base 2 */

         exp_b10 = (exp_b10 * 77) >> 8; /* <= exponent to base 10 */

         /* Avoid underflow here. */
         base = png_pow10(exp_b10); /* May underflow */

         while (base < DBL_MIN || base < fp)
         {
            /* And this may overflow. */
            double test = png_pow10(exp_b10+1);

            if (test <= DBL_MAX)
               ++exp_b10, base = test;

            else
               break;
         }

         /* Normalize fp and correct exp_b10, after this fp is in the
          * range [.1,1) and exp_b10 is both the exponent and the digit
          * *before* which the decimal point should be inserted
          * (starting with 0 for the first digit).  Note that this
          * works even if 10^exp_b10 is out of range because of the
          * test on DBL_MAX above.
          */
         fp /= base;
         while (fp >= 1) fp /= 10, ++exp_b10;

         /* Because of the code above fp may, at this point, be
          * less than .1, this is ok because the code below can
          * handle the leading zeros this generates, so no attempt
          * is made to correct that here.
          */

         {
            int czero, clead, cdigits;
            char exponent[10];

            /* Allow up to two leading zeros - this will not lengthen
             * the number compared to using E-n.
             */
            if (exp_b10 < 0 && exp_b10 > -3) /* PLUS 3 TOTAL 4 */
            {
               czero = -exp_b10; /* PLUS 2 digits: TOTAL 3 */
               exp_b10 = 0;      /* Dot added below before first output. */
            }
            else
               czero = 0;    /* No zeros to add */

            /* Generate the digit list, stripping trailing zeros and
             * inserting a '.' before a digit if the exponent is 0.
             */
            clead = czero; /* Count of leading zeros */
            cdigits = 0;   /* Count of digits in list. */

            do
            {
               double d;

               fp *= 10;
               /* Use modf here, not floor and subtract, so that
                * the separation is done in one step.  At the end
                * of the loop don't break the number into parts so
                * that the final digit is rounded.
                */
               if (cdigits+czero-clead+1 < (int)precision)
                  fp = modf(fp, &d);

               else
               {
                  d = floor(fp + .5);

                  if (d > 9)
                  {
                     /* Rounding up to 10, handle that here. */
                     if (czero > 0)
                     {
                        --czero, d = 1;
                        if (cdigits == 0) --clead;
                     }
                     else
                     {
                        while (cdigits > 0 && d > 9)
                        {
                           int ch = *--ascii;

                           if (exp_b10 != (-1))
                              ++exp_b10;

                           else if (ch == 46)
                           {
                              ch = *--ascii, ++size;
                              /* Advance exp_b10 to '1', so that the
                               * decimal point happens after the
                               * previous digit.
                               */
                              exp_b10 = 1;
                           }

                           --cdigits;
                           d = ch - 47;  /* I.e. 1+(ch-48) */
                        }

                        /* Did we reach the beginning? If so adjust the
                         * exponent but take into account the leading
                         * decimal point.
                         */
                        if (d > 9)  /* cdigits == 0 */
                        {
                           if (exp_b10 == (-1))
                           {
                              /* Leading decimal point (plus zeros?), if
                               * we lose the decimal point here it must
                               * be reentered below.
                               */
                              int ch = *--ascii;

                              if (ch == 46)
                                 ++size, exp_b10 = 1;

                              /* Else lost a leading zero, so 'exp_b10' is
                               * still ok at (-1)
                               */
                           }
                           else
                              ++exp_b10;

                           /* In all cases we output a '1' */
                           d = 1;
                        }
                     }
                  }
                  fp = 0; /* Guarantees termination below. */
               }

               if (d == 0)
               {
                  ++czero;
                  if (cdigits == 0) ++clead;
               }
               else
               {
                  /* Included embedded zeros in the digit count. */
                  cdigits += czero - clead;
                  clead = 0;

                  while (czero > 0)
                  {
                     /* exp_b10 == (-1) means we just output the decimal
                      * place - after the DP don't adjust 'exp_b10' any
                      * more!
                      */
                     if (exp_b10 != (-1))
                     {
                        if (exp_b10 == 0) *ascii++ = 46, --size;
                        /* PLUS 1: TOTAL 4 */
                        --exp_b10;
                     }
                     *ascii++ = 48, --czero;
                  }

                  if (exp_b10 != (-1))
                  {
                     if (exp_b10 == 0) *ascii++ = 46, --size; /* counted
                                                                 above */
                     --exp_b10;
                  }
                  *ascii++ = (char)(48 + (int)d), ++cdigits;
               }
            }
            while (cdigits+czero-clead < (int)precision && fp > DBL_MIN);

            /* The total output count (max) is now 4+precision */

            /* Check for an exponent, if we don't need one we are
             * done and just need to terminate the string.  At
             * this point exp_b10==(-1) is effectively if flag - it got
             * to '-1' because of the decrement after outputing
             * the decimal point above (the exponent required is
             * *not* -1!)
             */
            if (exp_b10 >= (-1) && exp_b10 <= 2)
            {
               /* The following only happens if we didn't output the
                * leading zeros above for negative exponent, so this
                * doest add to the digit requirement.  Note that the
                * two zeros here can only be output if the two leading
                * zeros were *not* output, so this doesn't increase
                * the output count.
                */
               while (--exp_b10 >= 0) *ascii++ = 48;

               *ascii = 0;

               /* Total buffer requirement (including the '\0') is
                * 5+precision - see check at the start.
                */
               return;
            }

            /* Here if an exponent is required, adjust size for
             * the digits we output but did not count.  The total
             * digit output here so far is at most 1+precision - no
             * decimal point and no leading or trailing zeros have
             * been output.
             */
            size -= cdigits;

            *ascii++ = 69, --size;    /* 'E': PLUS 1 TOTAL 2+precision */

            /* The following use of an unsigned temporary avoids ambiguities in
             * the signed arithmetic on exp_b10 and permits GCC at least to do
             * better optimization.
             */
            {
               unsigned int uexp_b10;

               if (exp_b10 < 0)
               {
                  *ascii++ = 45, --size; /* '-': PLUS 1 TOTAL 3+precision */
                  uexp_b10 = -exp_b10;
               }

               else
                  uexp_b10 = exp_b10;

               cdigits = 0;

               while (uexp_b10 > 0)
               {
                  exponent[cdigits++] = (char)(48 + uexp_b10 % 10);
                  uexp_b10 /= 10;
               }
            }

            /* Need another size check here for the exponent digits, so
             * this need not be considered above.
             */
            if ((int)size > cdigits)
            {
               while (cdigits > 0) *ascii++ = exponent[--cdigits];

               *ascii = 0;

               return;
            }
         }
      }
      else if (!(fp >= DBL_MIN))
      {
         *ascii++ = 48; /* '0' */
         *ascii = 0;
         return;
      }
      else
      {
         *ascii++ = 105; /* 'i' */
         *ascii++ = 110; /* 'n' */
         *ascii++ = 102; /* 'f' */
         *ascii = 0;
         return;
      }
   }

   /* Here on buffer too small. */
   png_error(png_ptr, "ASCII conversion buffer too small");
}

#  endif /* FLOATING_POINT */

#  ifdef PNG_FIXED_POINT_SUPPORTED
/* Function to format a fixed point value in ASCII.
 */
void /* PRIVATE */
png_ascii_from_fixed(png_const_structrp png_ptr, png_charp ascii,
    png_size_t size, png_fixed_point fp)
{
   /* Require space for 10 decimal digits, a decimal point, a minus sign and a
    * trailing \0, 13 characters:
    */
   if (size > 12)
   {
      png_uint_32 num;

      /* Avoid overflow here on the minimum integer. */
      if (fp < 0)
         *ascii++ = 45, --size, num = -fp;
      else
         num = fp;

      if (num <= 0x80000000) /* else overflowed */
      {
         unsigned int ndigits = 0, first = 16 /* flag value */;
         char digits[10];

         while (num)
         {
            /* Split the low digit off num: */
            unsigned int tmp = num/10;
            num -= tmp*10;
            digits[ndigits++] = (char)(48 + num);
            /* Record the first non-zero digit, note that this is a number
             * starting at 1, it's not actually the array index.
             */
            if (first == 16 && num > 0)
               first = ndigits;
            num = tmp;
         }

         if (ndigits > 0)
         {
            while (ndigits > 5) *ascii++ = digits[--ndigits];
            /* The remaining digits are fractional digits, ndigits is '5' or
             * smaller at this point.  It is certainly not zero.  Check for a
             * non-zero fractional digit:
             */
            if (first <= 5)
            {
               unsigned int i;
               *ascii++ = 46; /* decimal point */
               /* ndigits may be <5 for small numbers, output leading zeros
                * then ndigits digits to first:
                */
               i = 5;
               while (ndigits < i) *ascii++ = 48, --i;
               while (ndigits >= first) *ascii++ = digits[--ndigits];
               /* Don't output the trailing zeros! */
            }
         }
         else
            *ascii++ = 48;

         /* And null terminate the string: */
         *ascii = 0;
         return;
      }
   }

   /* Here on buffer too small. */
   png_error(png_ptr, "ASCII conversion buffer too small");
}
#   endif /* FIXED_POINT */
#endif /* READ_SCAL */

#if defined(PNG_FLOATING_POINT_SUPPORTED) && \
   !defined(PNG_FIXED_POINT_MACRO_SUPPORTED) && \
   (defined(PNG_gAMA_SUPPORTED) || defined(PNG_cHRM_SUPPORTED) || \
   defined(PNG_sCAL_SUPPORTED) || defined(PNG_READ_BACKGROUND_SUPPORTED) || \
   defined(PNG_READ_RGB_TO_GRAY_SUPPORTED)) || \
   (defined(PNG_sCAL_SUPPORTED) && \
   defined(PNG_FLOATING_ARITHMETIC_SUPPORTED))
png_fixed_point
png_fixed(png_const_structrp png_ptr, double fp, png_const_charp text)
{
   double r = floor(100000 * fp + .5);

   if (r > 2147483647. || r < -2147483648.)
      png_fixed_error(png_ptr, text);

   return (png_fixed_point)r;
}
#endif

#if defined(PNG_READ_GAMMA_SUPPORTED) || \
    defined(PNG_INCH_CONVERSIONS_SUPPORTED) || defined(PNG__READ_pHYs_SUPPORTED)
/* muldiv functions */
/* This API takes signed arguments and rounds the result to the nearest
 * integer (or, for a fixed point number - the standard argument - to
 * the nearest .00001).  Overflow and divide by zero are signalled in
 * the result, a boolean - true on success, false on overflow.
 */
int
png_muldiv(png_fixed_point_p res, png_fixed_point a, png_int_32 times,
    png_int_32 divisor)
{
   /* Return a * times / divisor, rounded. */
   if (divisor != 0)
   {
      if (a == 0 || times == 0)
      {
         *res = 0;
         return 1;
      }
      else
      {
#ifdef PNG_FLOATING_ARITHMETIC_SUPPORTED
         double r = a;
         r *= times;
         r /= divisor;
         r = floor(r+.5);

         /* A png_fixed_point is a 32-bit integer. */
         if (r <= 2147483647. && r >= -2147483648.)
         {
            *res = (png_fixed_point)r;
            return 1;
         }
#else
         int negative = 0;
         png_uint_32 A, T, D;
         png_uint_32 s16, s32, s00;

         if (a < 0)
            negative = 1, A = -a;
         else
            A = a;

         if (times < 0)
            negative = !negative, T = -times;
         else
            T = times;

         if (divisor < 0)
            negative = !negative, D = -divisor;
         else
            D = divisor;

         /* Following can't overflow because the arguments only
          * have 31 bits each, however the result may be 32 bits.
          */
         s16 = (A >> 16) * (T & 0xffff) +
                           (A & 0xffff) * (T >> 16);
         /* Can't overflow because the a*times bit is only 30
          * bits at most.
          */
         s32 = (A >> 16) * (T >> 16) + (s16 >> 16);
         s00 = (A & 0xffff) * (T & 0xffff);

         s16 = (s16 & 0xffff) << 16;
         s00 += s16;

         if (s00 < s16)
            ++s32; /* carry */

         if (s32 < D) /* else overflow */
         {
            /* s32.s00 is now the 64-bit product, do a standard
             * division, we know that s32 < D, so the maximum
             * required shift is 31.
             */
            int bitshift = 32;
            png_fixed_point result = 0; /* NOTE: signed */

            while (--bitshift >= 0)
            {
               png_uint_32 d32, d00;

               if (bitshift > 0)
                  d32 = D >> (32-bitshift), d00 = D << bitshift;

               else
                  d32 = 0, d00 = D;

               if (s32 > d32)
               {
                  if (s00 < d00) --s32; /* carry */
                  s32 -= d32, s00 -= d00, result += 1<<bitshift;
               }

               else
                  if (s32 == d32 && s00 >= d00)
                     s32 = 0, s00 -= d00, result += 1<<bitshift;
            }

            /* Handle the rounding. */
            if (s00 >= (D >> 1))
               ++result;

            if (negative)
               result = -result;

            /* Check for overflow. */
            if ((negative && result <= 0) || (!negative && result >= 0))
            {
               *res = result;
               return 1;
            }
         }
#endif
      }
   }

   return 0;
}
#endif /* READ_GAMMA || INCH_CONVERSIONS */

#if defined(PNG_READ_GAMMA_SUPPORTED) || defined(PNG_INCH_CONVERSIONS_SUPPORTED)
/* The following is for when the caller doesn't much care about the
 * result.
 */
png_fixed_point
png_muldiv_warn(png_const_structrp png_ptr, png_fixed_point a, png_int_32 times,
    png_int_32 divisor)
{
   png_fixed_point result;

   if (png_muldiv(&result, a, times, divisor))
      return result;

   png_warning(png_ptr, "fixed point overflow ignored");
   return 0;
}
#endif

#ifdef PNG_GAMMA_SUPPORTED /* more fixed point functions for gamma */
/* Calculate a reciprocal, return 0 on div-by-zero or overflow. */
png_fixed_point
png_reciprocal(png_fixed_point a)
{
#ifdef PNG_FLOATING_ARITHMETIC_SUPPORTED
   double r = floor(1E10/a+.5);

   if (r <= 2147483647. && r >= -2147483648.)
      return (png_fixed_point)r;
#else
   png_fixed_point res;

   if (png_muldiv(&res, 100000, 100000, a))
      return res;
#endif

   return 0; /* error/overflow */
}

/* This is the shared test on whether a gamma value is 'significant' - whether
 * it is worth doing gamma correction.
 */
int /* PRIVATE */
png_gamma_significant(png_fixed_point gamma_val)
{
   return gamma_val < PNG_FP_1 - PNG_GAMMA_THRESHOLD_FIXED ||
       gamma_val > PNG_FP_1 + PNG_GAMMA_THRESHOLD_FIXED;
}
#endif

#ifdef PNG_READ_GAMMA_SUPPORTED
/* A local convenience routine. */
static png_fixed_point
png_product2(png_fixed_point a, png_fixed_point b)
{
   /* The required result is 1/a * 1/b; the following preserves accuracy. */
#ifdef PNG_FLOATING_ARITHMETIC_SUPPORTED
   double r = a * 1E-5;
   r *= b;
   r = floor(r+.5);

   if (r <= 2147483647. && r >= -2147483648.)
      return (png_fixed_point)r;
#else
   png_fixed_point res;

   if (png_muldiv(&res, a, b, 100000))
      return res;
#endif

   return 0; /* overflow */
}

/* The inverse of the above. */
png_fixed_point
png_reciprocal2(png_fixed_point a, png_fixed_point b)
{
   /* The required result is 1/a * 1/b; the following preserves accuracy. */
#ifdef PNG_FLOATING_ARITHMETIC_SUPPORTED
   double r = 1E15/a;
   r /= b;
   r = floor(r+.5);

   if (r <= 2147483647. && r >= -2147483648.)
      return (png_fixed_point)r;
#else
   /* This may overflow because the range of png_fixed_point isn't symmetric,
    * but this API is only used for the product of file and screen gamma so it
    * doesn't matter that the smallest number it can produce is 1/21474, not
    * 1/100000
    */
   png_fixed_point res = png_product2(a, b);

   if (res != 0)
      return png_reciprocal(res);
#endif

   return 0; /* overflow */
}
#endif /* READ_GAMMA */

#ifdef PNG_READ_GAMMA_SUPPORTED /* gamma table code */
#ifndef PNG_FLOATING_ARITHMETIC_SUPPORTED
/* Fixed point gamma.
 *
 * The code to calculate the tables used below can be found in the shell script
 * contrib/tools/intgamma.sh
 *
 * To calculate gamma this code implements fast log() and exp() calls using only
 * fixed point arithmetic.  This code has sufficient precision for either 8-bit
 * or 16-bit sample values.
 *
 * The tables used here were calculated using simple 'bc' programs, but C double
 * precision floating point arithmetic would work fine.
 *
 * 8-bit log table
 *   This is a table of -log(value/255)/log(2) for 'value' in the range 128 to
 *   255, so it's the base 2 logarithm of a normalized 8-bit floating point
 *   mantissa.  The numbers are 32-bit fractions.
 */
static const png_uint_32
png_8bit_l2[128] =
{
   4270715492U, 4222494797U, 4174646467U, 4127164793U, 4080044201U, 4033279239U,
   3986864580U, 3940795015U, 3895065449U, 3849670902U, 3804606499U, 3759867474U,
   3715449162U, 3671346997U, 3627556511U, 3584073329U, 3540893168U, 3498011834U,
   3455425220U, 3413129301U, 3371120137U, 3329393864U, 3287946700U, 3246774933U,
   3205874930U, 3165243125U, 3124876025U, 3084770202U, 3044922296U, 3005329011U,
   2965987113U, 2926893432U, 2888044853U, 2849438323U, 2811070844U, 2772939474U,
   2735041326U, 2697373562U, 2659933400U, 2622718104U, 2585724991U, 2548951424U,
   2512394810U, 2476052606U, 2439922311U, 2404001468U, 2368287663U, 2332778523U,
   2297471715U, 2262364947U, 2227455964U, 2192742551U, 2158222529U, 2123893754U,
   2089754119U, 2055801552U, 2022034013U, 1988449497U, 1955046031U, 1921821672U,
   1888774511U, 1855902668U, 1823204291U, 1790677560U, 1758320682U, 1726131893U,
   1694109454U, 1662251657U, 1630556815U, 1599023271U, 1567649391U, 1536433567U,
   1505374214U, 1474469770U, 1443718700U, 1413119487U, 1382670639U, 1352370686U,
   1322218179U, 1292211689U, 1262349810U, 1232631153U, 1203054352U, 1173618059U,
   1144320946U, 1115161701U, 1086139034U, 1057251672U, 1028498358U, 999877854U,
   971388940U, 943030410U, 914801076U, 886699767U, 858725327U, 830876614U,
   803152505U, 775551890U, 748073672U, 720716771U, 693480120U, 666362667U,
   639363374U, 612481215U, 585715177U, 559064263U, 532527486U, 506103872U,
   479792461U, 453592303U, 427502463U, 401522014U, 375650043U, 349885648U,
   324227938U, 298676034U, 273229066U, 247886176U, 222646516U, 197509248U,
   172473545U, 147538590U, 122703574U, 97967701U, 73330182U, 48790236U,
   24347096U, 0U

#if 0
   /* The following are the values for 16-bit tables - these work fine for the
    * 8-bit conversions but produce very slightly larger errors in the 16-bit
    * log (about 1.2 as opposed to 0.7 absolute error in the final value).  To
    * use these all the shifts below must be adjusted appropriately.
    */
   65166, 64430, 63700, 62976, 62257, 61543, 60835, 60132, 59434, 58741, 58054,
   57371, 56693, 56020, 55352, 54689, 54030, 53375, 52726, 52080, 51439, 50803,
   50170, 49542, 48918, 48298, 47682, 47070, 46462, 45858, 45257, 44661, 44068,
   43479, 42894, 42312, 41733, 41159, 40587, 40020, 39455, 38894, 38336, 37782,
   37230, 36682, 36137, 35595, 35057, 34521, 33988, 33459, 32932, 32408, 31887,
   31369, 30854, 30341, 29832, 29325, 28820, 28319, 27820, 27324, 26830, 26339,
   25850, 25364, 24880, 24399, 23920, 23444, 22970, 22499, 22029, 21562, 21098,
   20636, 20175, 19718, 19262, 18808, 18357, 17908, 17461, 17016, 16573, 16132,
   15694, 15257, 14822, 14390, 13959, 13530, 13103, 12678, 12255, 11834, 11415,
   10997, 10582, 10168, 9756, 9346, 8937, 8531, 8126, 7723, 7321, 6921, 6523,
   6127, 5732, 5339, 4947, 4557, 4169, 3782, 3397, 3014, 2632, 2251, 1872, 1495,
   1119, 744, 372
#endif
};

static png_int_32
png_log8bit(unsigned int x)
{
   unsigned int lg2 = 0;
   /* Each time 'x' is multiplied by 2, 1 must be subtracted off the final log,
    * because the log is actually negate that means adding 1.  The final
    * returned value thus has the range 0 (for 255 input) to 7.994 (for 1
    * input), return -1 for the overflow (log 0) case, - so the result is
    * always at most 19 bits.
    */
   if ((x &= 0xff) == 0)
      return -1;

   if ((x & 0xf0) == 0)
      lg2  = 4, x <<= 4;

   if ((x & 0xc0) == 0)
      lg2 += 2, x <<= 2;

   if ((x & 0x80) == 0)
      lg2 += 1, x <<= 1;

   /* result is at most 19 bits, so this cast is safe: */
   return (png_int_32)((lg2 << 16) + ((png_8bit_l2[x-128]+32768)>>16));
}

/* The above gives exact (to 16 binary places) log2 values for 8-bit images,
 * for 16-bit images we use the most significant 8 bits of the 16-bit value to
 * get an approximation then multiply the approximation by a correction factor
 * determined by the remaining up to 8 bits.  This requires an additional step
 * in the 16-bit case.
 *
 * We want log2(value/65535), we have log2(v'/255), where:
 *
 *    value = v' * 256 + v''
 *          = v' * f
 *
 * So f is value/v', which is equal to (256+v''/v') since v' is in the range 128
 * to 255 and v'' is in the range 0 to 255 f will be in the range 256 to less
 * than 258.  The final factor also needs to correct for the fact that our 8-bit
 * value is scaled by 255, whereas the 16-bit values must be scaled by 65535.
 *
 * This gives a final formula using a calculated value 'x' which is value/v' and
 * scaling by 65536 to match the above table:
 *
 *   log2(x/257) * 65536
 *
 * Since these numbers are so close to '1' we can use simple linear
 * interpolation between the two end values 256/257 (result -368.61) and 258/257
 * (result 367.179).  The values used below are scaled by a further 64 to give
 * 16-bit precision in the interpolation:
 *
 * Start (256): -23591
 * Zero  (257):      0
 * End   (258):  23499
 */
static png_int_32
png_log16bit(png_uint_32 x)
{
   unsigned int lg2 = 0;

   /* As above, but now the input has 16 bits. */
   if ((x &= 0xffff) == 0)
      return -1;

   if ((x & 0xff00) == 0)
      lg2  = 8, x <<= 8;

   if ((x & 0xf000) == 0)
      lg2 += 4, x <<= 4;

   if ((x & 0xc000) == 0)
      lg2 += 2, x <<= 2;

   if ((x & 0x8000) == 0)
      lg2 += 1, x <<= 1;

   /* Calculate the base logarithm from the top 8 bits as a 28-bit fractional
    * value.
    */
   lg2 <<= 28;
   lg2 += (png_8bit_l2[(x>>8)-128]+8) >> 4;

   /* Now we need to interpolate the factor, this requires a division by the top
    * 8 bits.  Do this with maximum precision.
    */
   x = ((x << 16) + (x >> 9)) / (x >> 8);

   /* Since we divided by the top 8 bits of 'x' there will be a '1' at 1<<24,
    * the value at 1<<16 (ignoring this) will be 0 or 1; this gives us exactly
    * 16 bits to interpolate to get the low bits of the result.  Round the
    * answer.  Note that the end point values are scaled by 64 to retain overall
    * precision and that 'lg2' is current scaled by an extra 12 bits, so adjust
    * the overall scaling by 6-12.  Round at every step.
    */
   x -= 1U << 24;

   if (x <= 65536U) /* <= '257' */
      lg2 += ((23591U * (65536U-x)) + (1U << (16+6-12-1))) >> (16+6-12);

   else
      lg2 -= ((23499U * (x-65536U)) + (1U << (16+6-12-1))) >> (16+6-12);

   /* Safe, because the result can't have more than 20 bits: */
   return (png_int_32)((lg2 + 2048) >> 12);
}

/* The 'exp()' case must invert the above, taking a 20-bit fixed point
 * logarithmic value and returning a 16 or 8-bit number as appropriate.  In
 * each case only the low 16 bits are relevant - the fraction - since the
 * integer bits (the top 4) simply determine a shift.
 *
 * The worst case is the 16-bit distinction between 65535 and 65534, this
 * requires perhaps spurious accuracty in the decoding of the logarithm to
 * distinguish log2(65535/65534.5) - 10^-5 or 17 bits.  There is little chance
 * of getting this accuracy in practice.
 *
 * To deal with this the following exp() function works out the exponent of the
 * frational part of the logarithm by using an accurate 32-bit value from the
 * top four fractional bits then multiplying in the remaining bits.
 */
static const png_uint_32
png_32bit_exp[16] =
{
   /* NOTE: the first entry is deliberately set to the maximum 32-bit value. */
   4294967295U, 4112874773U, 3938502376U, 3771522796U, 3611622603U, 3458501653U,
   3311872529U, 3171459999U, 3037000500U, 2908241642U, 2784941738U, 2666869345U,
   2553802834U, 2445529972U, 2341847524U, 2242560872U
};

/* Adjustment table; provided to explain the numbers in the code below. */
#if 0
for (i=11;i>=0;--i){ print i, " ", (1 - e(-(2^i)/65536*l(2))) * 2^(32-i), "\n"}
   11 44937.64284865548751208448
   10 45180.98734845585101160448
    9 45303.31936980687359311872
    8 45364.65110595323018870784
    7 45395.35850361789624614912
    6 45410.72259715102037508096
    5 45418.40724413220722311168
    4 45422.25021786898173001728
    3 45424.17186732298419044352
    2 45425.13273269940811464704
    1 45425.61317555035558641664
    0 45425.85339951654943850496
#endif

static png_uint_32
png_exp(png_fixed_point x)
{
   if (x > 0 && x <= 0xfffff) /* Else overflow or zero (underflow) */
   {
      /* Obtain a 4-bit approximation */
      png_uint_32 e = png_32bit_exp[(x >> 12) & 0xf];

      /* Incorporate the low 12 bits - these decrease the returned value by
       * multiplying by a number less than 1 if the bit is set.  The multiplier
       * is determined by the above table and the shift. Notice that the values
       * converge on 45426 and this is used to allow linear interpolation of the
       * low bits.
       */
      if (x & 0x800)
         e -= (((e >> 16) * 44938U) +  16U) >> 5;

      if (x & 0x400)
         e -= (((e >> 16) * 45181U) +  32U) >> 6;

      if (x & 0x200)
         e -= (((e >> 16) * 45303U) +  64U) >> 7;

      if (x & 0x100)
         e -= (((e >> 16) * 45365U) + 128U) >> 8;

      if (x & 0x080)
         e -= (((e >> 16) * 45395U) + 256U) >> 9;

      if (x & 0x040)
         e -= (((e >> 16) * 45410U) + 512U) >> 10;

      /* And handle the low 6 bits in a single block. */
      e -= (((e >> 16) * 355U * (x & 0x3fU)) + 256U) >> 9;

      /* Handle the upper bits of x. */
      e >>= x >> 16;
      return e;
   }

   /* Check for overflow */
   if (x <= 0)
      return png_32bit_exp[0];

   /* Else underflow */
   return 0;
}

static png_byte
png_exp8bit(png_fixed_point lg2)
{
   /* Get a 32-bit value: */
   png_uint_32 x = png_exp(lg2);

   /* Convert the 32-bit value to 0..255 by multiplying by 256-1, note that the
    * second, rounding, step can't overflow because of the first, subtraction,
    * step.
    */
   x -= x >> 8;
   return (png_byte)((x + 0x7fffffU) >> 24);
}

static png_uint_16
png_exp16bit(png_fixed_point lg2)
{
   /* Get a 32-bit value: */
   png_uint_32 x = png_exp(lg2);

   /* Convert the 32-bit value to 0..65535 by multiplying by 65536-1: */
   x -= x >> 16;
   return (png_uint_16)((x + 32767U) >> 16);
}
#endif /* FLOATING_ARITHMETIC */

png_byte
png_gamma_8bit_correct(unsigned int value, png_fixed_point gamma_val)
{
   if (value > 0 && value < 255)
   {
#     ifdef PNG_FLOATING_ARITHMETIC_SUPPORTED
         double r = floor(255*pow(value/255.,gamma_val*.00001)+.5);
         return (png_byte)r;
#     else
         png_int_32 lg2 = png_log8bit(value);
         png_fixed_point res;

         if (png_muldiv(&res, gamma_val, lg2, PNG_FP_1))
            return png_exp8bit(res);

         /* Overflow. */
         value = 0;
#     endif
   }

   return (png_byte)value;
}

png_uint_16
png_gamma_16bit_correct(unsigned int value, png_fixed_point gamma_val)
{
   if (value > 0 && value < 65535)
   {
#     ifdef PNG_FLOATING_ARITHMETIC_SUPPORTED
         double r = floor(65535*pow(value/65535.,gamma_val*.00001)+.5);
         return (png_uint_16)r;
#     else
         png_int_32 lg2 = png_log16bit(value);
         png_fixed_point res;

         if (png_muldiv(&res, gamma_val, lg2, PNG_FP_1))
            return png_exp16bit(res);

         /* Overflow. */
         value = 0;
#     endif
   }

   return (png_uint_16)value;
}

/* This does the right thing based on the bit_depth field of the
 * png_struct, interpreting values as 8-bit or 16-bit.  While the result
 * is nominally a 16-bit value if bit depth is 8 then the result is
 * 8-bit (as are the arguments.)
 */
png_uint_16 /* PRIVATE */
png_gamma_correct(png_structrp png_ptr, unsigned int value,
    png_fixed_point gamma_val)
{
   if (png_ptr->bit_depth == 8)
      return png_gamma_8bit_correct(value, gamma_val);

   else
      return png_gamma_16bit_correct(value, gamma_val);
}

/* Internal function to build a single 16-bit table - the table consists of
 * 'num' 256 entry subtables, where 'num' is determined by 'shift' - the amount
 * to shift the input values right (or 16-number_of_signifiant_bits).
 *
 * The caller is responsible for ensuring that the table gets cleaned up on
 * png_error (i.e. if one of the mallocs below fails) - i.e. the *table argument
 * should be somewhere that will be cleaned.
 */
static void
png_build_16bit_table(png_structrp png_ptr, png_uint_16pp *ptable,
   PNG_CONST unsigned int shift, PNG_CONST png_fixed_point gamma_val)
{
   /* Various values derived from 'shift': */
   PNG_CONST unsigned int num = 1U << (8U - shift);
   PNG_CONST unsigned int max = (1U << (16U - shift))-1U;
   PNG_CONST unsigned int max_by_2 = 1U << (15U-shift);
   unsigned int i;

   png_uint_16pp table = *ptable =
       (png_uint_16pp)png_calloc(png_ptr, num * (sizeof (png_uint_16p)));

   for (i = 0; i < num; i++)
   {
      png_uint_16p sub_table = table[i] =
          (png_uint_16p)png_malloc(png_ptr, 256 * (sizeof (png_uint_16)));

      /* The 'threshold' test is repeated here because it can arise for one of
       * the 16-bit tables even if the others don't hit it.
       */
      if (png_gamma_significant(gamma_val))
      {
         /* The old code would overflow at the end and this would cause the
          * 'pow' function to return a result >1, resulting in an
          * arithmetic error.  This code follows the spec exactly; ig is
          * the recovered input sample, it always has 8-16 bits.
          *
          * We want input * 65535/max, rounded, the arithmetic fits in 32
          * bits (unsigned) so long as max <= 32767.
          */
         unsigned int j;
         for (j = 0; j < 256; j++)
         {
            png_uint_32 ig = (j << (8-shift)) + i;
#           ifdef PNG_FLOATING_ARITHMETIC_SUPPORTED
               /* Inline the 'max' scaling operation: */
               double d = floor(65535*pow(ig/(double)max, gamma_val*.00001)+.5);
               sub_table[j] = (png_uint_16)d;
#           else
               if (shift)
                  ig = (ig * 65535U + max_by_2)/max;

               sub_table[j] = png_gamma_16bit_correct(ig, gamma_val);
#           endif
         }
      }
      else
      {
         /* We must still build a table, but do it the fast way. */
         unsigned int j;

         for (j = 0; j < 256; j++)
         {
            png_uint_32 ig = (j << (8-shift)) + i;

            if (shift)
               ig = (ig * 65535U + max_by_2)/max;

            sub_table[j] = (png_uint_16)ig;
         }
      }
   }
}

/* NOTE: this function expects the *inverse* of the overall gamma transformation
 * required.
 */
static void
png_build_16to8_table(png_structrp png_ptr, png_uint_16pp *ptable,
   PNG_CONST unsigned int shift, PNG_CONST png_fixed_point gamma_val)
{
   PNG_CONST unsigned int num = 1U << (8U - shift);
   PNG_CONST unsigned int max = (1U << (16U - shift))-1U;
   unsigned int i;
   png_uint_32 last;

   png_uint_16pp table = *ptable =
       (png_uint_16pp)png_calloc(png_ptr, num * (sizeof (png_uint_16p)));

   /* 'num' is the number of tables and also the number of low bits of low
    * bits of the input 16-bit value used to select a table.  Each table is
    * itself index by the high 8 bits of the value.
    */
   for (i = 0; i < num; i++)
      table[i] = (png_uint_16p)png_malloc(png_ptr,
          256 * (sizeof (png_uint_16)));

   /* 'gamma_val' is set to the reciprocal of the value calculated above, so
    * pow(out,g) is an *input* value.  'last' is the last input value set.
    *
    * In the loop 'i' is used to find output values.  Since the output is
    * 8-bit there are only 256 possible values.  The tables are set up to
    * select the closest possible output value for each input by finding
    * the input value at the boundary between each pair of output values
    * and filling the table up to that boundary with the lower output
    * value.
    *
    * The boundary values are 0.5,1.5..253.5,254.5.  Since these are 9-bit
    * values the code below uses a 16-bit value in i; the values start at
    * 128.5 (for 0.5) and step by 257, for a total of 254 values (the last
    * entries are filled with 255).  Start i at 128 and fill all 'last'
    * table entries <= 'max'
    */
   last = 0;
   for (i = 0; i < 255; ++i) /* 8-bit output value */
   {
      /* Find the corresponding maximum input value */
      png_uint_16 out = (png_uint_16)(i * 257U); /* 16-bit output value */

      /* Find the boundary value in 16 bits: */
      png_uint_32 bound = png_gamma_16bit_correct(out+128U, gamma_val);

      /* Adjust (round) to (16-shift) bits: */
      bound = (bound * max + 32768U)/65535U + 1U;

      while (last < bound)
      {
         table[last & (0xffU >> shift)][last >> (8U - shift)] = out;
         last++;
      }
   }

   /* And fill in the final entries. */
   while (last < (num << 8))
   {
      table[last & (0xff >> shift)][last >> (8U - shift)] = 65535U;
      last++;
   }
}

/* Build a single 8-bit table: same as the 16-bit case but much simpler (and
 * typically much faster).  Note that libpng currently does no sBIT processing
 * (apparently contrary to the spec) so a 256 entry table is always generated.
 */
static void
png_build_8bit_table(png_structrp png_ptr, png_bytepp ptable,
   PNG_CONST png_fixed_point gamma_val)
{
   unsigned int i;
   png_bytep table = *ptable = (png_bytep)png_malloc(png_ptr, 256);

   if (png_gamma_significant(gamma_val)) for (i=0; i<256; i++)
      table[i] = png_gamma_8bit_correct(i, gamma_val);

   else for (i=0; i<256; ++i)
      table[i] = (png_byte)i;
}

/* Used from png_read_destroy and below to release the memory used by the gamma
 * tables.
 */
void /* PRIVATE */
png_destroy_gamma_table(png_structrp png_ptr)
{
   png_free(png_ptr, png_ptr->gamma_table);
   png_ptr->gamma_table = NULL;

   if (png_ptr->gamma_16_table != NULL)
   {
      int i;
      int istop = (1 << (8 - png_ptr->gamma_shift));
      for (i = 0; i < istop; i++)
      {
         png_free(png_ptr, png_ptr->gamma_16_table[i]);
      }
   png_free(png_ptr, png_ptr->gamma_16_table);
   png_ptr->gamma_16_table = NULL;
   }

#if defined(PNG_READ_BACKGROUND_SUPPORTED) || \
   defined(PNG_READ_ALPHA_MODE_SUPPORTED) || \
   defined(PNG_READ_RGB_TO_GRAY_SUPPORTED)
   png_free(png_ptr, png_ptr->gamma_from_1);
   png_ptr->gamma_from_1 = NULL;
   png_free(png_ptr, png_ptr->gamma_to_1);
   png_ptr->gamma_to_1 = NULL;

   if (png_ptr->gamma_16_from_1 != NULL)
   {
      int i;
      int istop = (1 << (8 - png_ptr->gamma_shift));
      for (i = 0; i < istop; i++)
      {
         png_free(png_ptr, png_ptr->gamma_16_from_1[i]);
      }
   png_free(png_ptr, png_ptr->gamma_16_from_1);
   png_ptr->gamma_16_from_1 = NULL;
   }
   if (png_ptr->gamma_16_to_1 != NULL)
   {
      int i;
      int istop = (1 << (8 - png_ptr->gamma_shift));
      for (i = 0; i < istop; i++)
      {
         png_free(png_ptr, png_ptr->gamma_16_to_1[i]);
      }
   png_free(png_ptr, png_ptr->gamma_16_to_1);
   png_ptr->gamma_16_to_1 = NULL;
   }
#endif /* READ_BACKGROUND || READ_ALPHA_MODE || RGB_TO_GRAY */
}

/* We build the 8- or 16-bit gamma tables here.  Note that for 16-bit
 * tables, we don't make a full table if we are reducing to 8-bit in
 * the future.  Note also how the gamma_16 tables are segmented so that
 * we don't need to allocate > 64K chunks for a full 16-bit table.
 */
void /* PRIVATE */
png_build_gamma_table(png_structrp png_ptr, int bit_depth)
{
  png_debug(1, "in png_build_gamma_table");

  /* Remove any existing table; this copes with multiple calls to
   * png_read_update_info.  The warning is because building the gamma tables
   * multiple times is a performance hit - it's harmless but the ability to call
   * png_read_update_info() multiple times is new in 1.5.6 so it seems sensible
   * to warn if the app introduces such a hit.
   */
  if (png_ptr->gamma_table != NULL || png_ptr->gamma_16_table != NULL)
  {
    png_warning(png_ptr, "gamma table being rebuilt");
    png_destroy_gamma_table(png_ptr);
  }

  if (bit_depth <= 8)
  {
     png_build_8bit_table(png_ptr, &png_ptr->gamma_table,
         png_ptr->screen_gamma > 0 ?  png_reciprocal2(png_ptr->colorspace.gamma,
         png_ptr->screen_gamma) : PNG_FP_1);

#if defined(PNG_READ_BACKGROUND_SUPPORTED) || \
   defined(PNG_READ_ALPHA_MODE_SUPPORTED) || \
   defined(PNG_READ_RGB_TO_GRAY_SUPPORTED)
     if (png_ptr->transformations & (PNG_COMPOSE | PNG_RGB_TO_GRAY))
     {
        png_build_8bit_table(png_ptr, &png_ptr->gamma_to_1,
            png_reciprocal(png_ptr->colorspace.gamma));

        png_build_8bit_table(png_ptr, &png_ptr->gamma_from_1,
            png_ptr->screen_gamma > 0 ?  png_reciprocal(png_ptr->screen_gamma) :
            png_ptr->colorspace.gamma/* Probably doing rgb_to_gray */);
     }
#endif /* READ_BACKGROUND || READ_ALPHA_MODE || RGB_TO_GRAY */
  }
  else
  {
     png_byte shift, sig_bit;

     if (png_ptr->color_type & PNG_COLOR_MASK_COLOR)
     {
        sig_bit = png_ptr->sig_bit.red;

        if (png_ptr->sig_bit.green > sig_bit)
           sig_bit = png_ptr->sig_bit.green;

        if (png_ptr->sig_bit.blue > sig_bit)
           sig_bit = png_ptr->sig_bit.blue;
     }
     else
        sig_bit = png_ptr->sig_bit.gray;

     /* 16-bit gamma code uses this equation:
      *
      *   ov = table[(iv & 0xff) >> gamma_shift][iv >> 8]
      *
      * Where 'iv' is the input color value and 'ov' is the output value -
      * pow(iv, gamma).
      *
      * Thus the gamma table consists of up to 256 256 entry tables.  The table
      * is selected by the (8-gamma_shift) most significant of the low 8 bits of
      * the color value then indexed by the upper 8 bits:
      *
      *   table[low bits][high 8 bits]
      *
      * So the table 'n' corresponds to all those 'iv' of:
      *
      *   <all high 8-bit values><n << gamma_shift>..<(n+1 << gamma_shift)-1>
      *
      */
     if (sig_bit > 0 && sig_bit < 16U)
        shift = (png_byte)(16U - sig_bit); /* shift == insignificant bits */

     else
        shift = 0; /* keep all 16 bits */

     if (png_ptr->transformations & (PNG_16_TO_8 | PNG_SCALE_16_TO_8))
     {
        /* PNG_MAX_GAMMA_8 is the number of bits to keep - effectively
         * the significant bits in the *input* when the output will
         * eventually be 8 bits.  By default it is 11.
         */
        if (shift < (16U - PNG_MAX_GAMMA_8))
           shift = (16U - PNG_MAX_GAMMA_8);
     }

     if (shift > 8U)
        shift = 8U; /* Guarantees at least one table! */

     png_ptr->gamma_shift = shift;

#ifdef PNG_16BIT_SUPPORTED
     /* NOTE: prior to 1.5.4 this test used to include PNG_BACKGROUND (now
      * PNG_COMPOSE).  This effectively smashed the background calculation for
      * 16-bit output because the 8-bit table assumes the result will be reduced
      * to 8 bits.
      */
     if (png_ptr->transformations & (PNG_16_TO_8 | PNG_SCALE_16_TO_8))
#endif
         png_build_16to8_table(png_ptr, &png_ptr->gamma_16_table, shift,
         png_ptr->screen_gamma > 0 ? png_product2(png_ptr->colorspace.gamma,
         png_ptr->screen_gamma) : PNG_FP_1);

#ifdef PNG_16BIT_SUPPORTED
     else
         png_build_16bit_table(png_ptr, &png_ptr->gamma_16_table, shift,
         png_ptr->screen_gamma > 0 ? png_reciprocal2(png_ptr->colorspace.gamma,
         png_ptr->screen_gamma) : PNG_FP_1);
#endif

#if defined(PNG_READ_BACKGROUND_SUPPORTED) || \
   defined(PNG_READ_ALPHA_MODE_SUPPORTED) || \
   defined(PNG_READ_RGB_TO_GRAY_SUPPORTED)
     if (png_ptr->transformations & (PNG_COMPOSE | PNG_RGB_TO_GRAY))
     {
        png_build_16bit_table(png_ptr, &png_ptr->gamma_16_to_1, shift,
            png_reciprocal(png_ptr->colorspace.gamma));

        /* Notice that the '16 from 1' table should be full precision, however
         * the lookup on this table still uses gamma_shift, so it can't be.
         * TODO: fix this.
         */
        png_build_16bit_table(png_ptr, &png_ptr->gamma_16_from_1, shift,
            png_ptr->screen_gamma > 0 ? png_reciprocal(png_ptr->screen_gamma) :
            png_ptr->colorspace.gamma/* Probably doing rgb_to_gray */);
     }
#endif /* READ_BACKGROUND || READ_ALPHA_MODE || RGB_TO_GRAY */
  }
}
#endif /* READ_GAMMA */

/* sRGB support */
#if defined PNG_SIMPLIFIED_READ_SUPPORTED ||\
   defined PNG_SIMPLIFIED_WRITE_SUPPORTED
/* sRGB conversion tables; these are machine generated with the code in
 * contrib/tools/makesRGB.c.  The actual sRGB transfer curve defined in the
 * specification (see the article at http://en.wikipedia.org/wiki/SRGB)
 * is used, not the gamma=1/2.2 approximation use elsewhere in libpng.
 * The sRGB to linear table is exact (to the nearest 16 bit linear fraction).
 * The inverse (linear to sRGB) table has accuracies as follows:
 *
 * For all possible (255*65535+1) input values:
 *
 *    error: -0.515566 - 0.625971, 79441 (0.475369%) of readings inexact
 *
 * For the input values corresponding to the 65536 16-bit values:
 *
 *    error: -0.513727 - 0.607759, 308 (0.469978%) of readings inexact
 *
 * In all cases the inexact readings are off by one.
 */

#ifdef PNG_SIMPLIFIED_READ_SUPPORTED
/* The convert-to-sRGB table is only currently required for read. */
const png_uint_16 png_sRGB_table[256] =
{
   0,20,40,60,80,99,119,139,
   159,179,199,219,241,264,288,313,
   340,367,396,427,458,491,526,562,
   599,637,677,718,761,805,851,898,
   947,997,1048,1101,1156,1212,1270,1330,
   1391,1453,1517,1583,1651,1720,1790,1863,
   1937,2013,2090,2170,2250,2333,2418,2504,
   2592,2681,2773,2866,2961,3058,3157,3258,
   3360,3464,3570,3678,3788,3900,4014,4129,
   4247,4366,4488,4611,4736,4864,4993,5124,
   5257,5392,5530,5669,5810,5953,6099,6246,
   6395,6547,6700,6856,7014,7174,7335,7500,
   7666,7834,8004,8177,8352,8528,8708,8889,
   9072,9258,9445,9635,9828,10022,10219,10417,
   10619,10822,11028,11235,11446,11658,11873,12090,
   12309,12530,12754,12980,13209,13440,13673,13909,
   14146,14387,14629,14874,15122,15371,15623,15878,
   16135,16394,16656,16920,17187,17456,17727,18001,
   18277,18556,18837,19121,19407,19696,19987,20281,
   20577,20876,21177,21481,21787,22096,22407,22721,
   23038,23357,23678,24002,24329,24658,24990,25325,
   25662,26001,26344,26688,27036,27386,27739,28094,
   28452,28813,29176,29542,29911,30282,30656,31033,
   31412,31794,32179,32567,32957,33350,33745,34143,
   34544,34948,35355,35764,36176,36591,37008,37429,
   37852,38278,38706,39138,39572,40009,40449,40891,
   41337,41785,42236,42690,43147,43606,44069,44534,
   45002,45473,45947,46423,46903,47385,47871,48359,
   48850,49344,49841,50341,50844,51349,51858,52369,
   52884,53401,53921,54445,54971,55500,56032,56567,
   57105,57646,58190,58737,59287,59840,60396,60955,
   61517,62082,62650,63221,63795,64372,64952,65535
};

#endif /* simplified read only */

/* The base/delta tables are required for both read and write (but currently
 * only the simplified versions.)
 */
const png_uint_16 png_sRGB_base[512] =
{
   128,1782,3383,4644,5675,6564,7357,8074,
   8732,9346,9921,10463,10977,11466,11935,12384,
   12816,13233,13634,14024,14402,14769,15125,15473,
   15812,16142,16466,16781,17090,17393,17690,17981,
   18266,18546,18822,19093,19359,19621,19879,20133,
   20383,20630,20873,21113,21349,21583,21813,22041,
   22265,22487,22707,22923,23138,23350,23559,23767,
   23972,24175,24376,24575,24772,24967,25160,25352,
   25542,25730,25916,26101,26284,26465,26645,26823,
   27000,27176,27350,27523,27695,27865,28034,28201,
   28368,28533,28697,28860,29021,29182,29341,29500,
   29657,29813,29969,30123,30276,30429,30580,30730,
   30880,31028,31176,31323,31469,31614,31758,31902,
   32045,32186,32327,32468,32607,32746,32884,33021,
   33158,33294,33429,33564,33697,33831,33963,34095,
   34226,34357,34486,34616,34744,34873,35000,35127,
   35253,35379,35504,35629,35753,35876,35999,36122,
   36244,36365,36486,36606,36726,36845,36964,37083,
   37201,37318,37435,37551,37668,37783,37898,38013,
   38127,38241,38354,38467,38580,38692,38803,38915,
   39026,39136,39246,39356,39465,39574,39682,39790,
   39898,40005,40112,40219,40325,40431,40537,40642,
   40747,40851,40955,41059,41163,41266,41369,41471,
   41573,41675,41777,41878,41979,42079,42179,42279,
   42379,42478,42577,42676,42775,42873,42971,43068,
   43165,43262,43359,43456,43552,43648,43743,43839,
   43934,44028,44123,44217,44311,44405,44499,44592,
   44685,44778,44870,44962,45054,45146,45238,45329,
   45420,45511,45601,45692,45782,45872,45961,46051,
   46140,46229,46318,46406,46494,46583,46670,46758,
   46846,46933,47020,47107,47193,47280,47366,47452,
   47538,47623,47709,47794,47879,47964,48048,48133,
   48217,48301,48385,48468,48552,48635,48718,48801,
   48884,48966,49048,49131,49213,49294,49376,49458,
   49539,49620,49701,49782,49862,49943,50023,50103,
   50183,50263,50342,50422,50501,50580,50659,50738,
   50816,50895,50973,51051,51129,51207,51285,51362,
   51439,51517,51594,51671,51747,51824,51900,51977,
   52053,52129,52205,52280,52356,52432,52507,52582,
   52657,52732,52807,52881,52956,53030,53104,53178,
   53252,53326,53400,53473,53546,53620,53693,53766,
   53839,53911,53984,54056,54129,54201,54273,54345,
   54417,54489,54560,54632,54703,54774,54845,54916,
   54987,55058,55129,55199,55269,55340,55410,55480,
   55550,55620,55689,55759,55828,55898,55967,56036,
   56105,56174,56243,56311,56380,56448,56517,56585,
   56653,56721,56789,56857,56924,56992,57059,57127,
   57194,57261,57328,57395,57462,57529,57595,57662,
   57728,57795,57861,57927,57993,58059,58125,58191,
   58256,58322,58387,58453,58518,58583,58648,58713,
   58778,58843,58908,58972,59037,59101,59165,59230,
   59294,59358,59422,59486,59549,59613,59677,59740,
   59804,59867,59930,59993,60056,60119,60182,60245,
   60308,60370,60433,60495,60558,60620,60682,60744,
   60806,60868,60930,60992,61054,61115,61177,61238,
   61300,61361,61422,61483,61544,61605,61666,61727,
   61788,61848,61909,61969,62030,62090,62150,62211,
   62271,62331,62391,62450,62510,62570,62630,62689,
   62749,62808,62867,62927,62986,63045,63104,63163,
   63222,63281,63340,63398,63457,63515,63574,63632,
   63691,63749,63807,63865,63923,63981,64039,64097,
   64155,64212,64270,64328,64385,64443,64500,64557,
   64614,64672,64729,64786,64843,64900,64956,65013,
   65070,65126,65183,65239,65296,65352,65409,65465
};

const png_byte png_sRGB_delta[512] =
{
   207,201,158,129,113,100,90,82,77,72,68,64,61,59,56,54,
   52,50,49,47,46,45,43,42,41,40,39,39,38,37,36,36,
   35,34,34,33,33,32,32,31,31,30,30,30,29,29,28,28,
   28,27,27,27,27,26,26,26,25,25,25,25,24,24,24,24,
   23,23,23,23,23,22,22,22,22,22,22,21,21,21,21,21,
   21,20,20,20,20,20,20,20,20,19,19,19,19,19,19,19,
   19,18,18,18,18,18,18,18,18,18,18,17,17,17,17,17,
   17,17,17,17,17,17,16,16,16,16,16,16,16,16,16,16,
   16,16,16,16,15,15,15,15,15,15,15,15,15,15,15,15,
   15,15,15,15,14,14,14,14,14,14,14,14,14,14,14,14,
   14,14,14,14,14,14,14,13,13,13,13,13,13,13,13,13,
   13,13,13,13,13,13,13,13,13,13,13,13,13,13,12,12,
   12,12,12,12,12,12,12,12,12,12,12,12,12,12,12,12,
   12,12,12,12,12,12,12,12,12,12,12,12,11,11,11,11,
   11,11,11,11,11,11,11,11,11,11,11,11,11,11,11,11,
   11,11,11,11,11,11,11,11,11,11,11,11,11,11,11,11,
   11,10,10,10,10,10,10,10,10,10,10,10,10,10,10,10,
   10,10,10,10,10,10,10,10,10,10,10,10,10,10,10,10,
   10,10,10,10,10,10,10,10,10,10,10,10,10,10,10,10,
   10,9,9,9,9,9,9,9,9,9,9,9,9,9,9,9,
   9,9,9,9,9,9,9,9,9,9,9,9,9,9,9,9,
   9,9,9,9,9,9,9,9,9,9,9,9,9,9,9,9,
   9,9,9,9,9,9,9,9,9,9,9,9,9,9,9,9,
   9,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,
   8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,
   8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,
   8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,
   8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,
   8,8,8,8,8,8,8,8,8,7,7,7,7,7,7,7,
   7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,
   7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,
   7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7
};
#endif /* SIMPLIFIED READ/WRITE sRGB support */

/* SIMPLIFIED READ/WRITE SUPPORT */
#if defined PNG_SIMPLIFIED_READ_SUPPORTED ||\
   defined PNG_SIMPLIFIED_WRITE_SUPPORTED
static int
png_image_free_function(png_voidp argument)
{
   png_imagep image = png_voidcast(png_imagep, argument);
   png_controlp cp = image->opaque;
   png_control c;

   /* Double check that we have a png_ptr - it should be impossible to get here
    * without one.
    */
   if (cp->png_ptr == NULL)
      return 0;

   /* First free any data held in the control structure. */
#  ifdef PNG_STDIO_SUPPORTED
      if (cp->owned_file)
      {
         FILE *fp = png_voidcast(FILE*, cp->png_ptr->io_ptr);
         cp->owned_file = 0;

         /* Ignore errors here. */
         if (fp != NULL)
         {
            cp->png_ptr->io_ptr = NULL;
            (void)fclose(fp);
         }
      }
#  endif

   /* Copy the control structure so that the original, allocated, version can be
    * safely freed.  Notice that a png_error here stops the remainder of the
    * cleanup, but this is probably fine because that would indicate bad memory
    * problems anyway.
    */
   c = *cp;
   image->opaque = &c;
   png_free(c.png_ptr, cp);

   /* Then the structures, calling the correct API. */
   if (c.for_write)
   {
#     ifdef PNG_SIMPLIFIED_WRITE_SUPPORTED
         png_destroy_write_struct(&c.png_ptr, &c.info_ptr);
#     else
         png_error(c.png_ptr, "simplified write not supported");
#     endif
   }
   else
   {
#     ifdef PNG_SIMPLIFIED_READ_SUPPORTED
         png_destroy_read_struct(&c.png_ptr, &c.info_ptr, NULL);
#     else
         png_error(c.png_ptr, "simplified read not supported");
#     endif
   }

   /* Success. */
   return 1;
}

void PNGAPI
png_image_free(png_imagep image)
{
   /* Safely call the real function, but only if doing so is safe at this point
    * (if not inside an error handling context).  Otherwise assume
    * png_safe_execute will call this API after the return.
    */
   if (image != NULL && image->opaque != NULL &&
      image->opaque->error_buf == NULL)
   {
      /* Ignore errors here: */
      (void)png_safe_execute(image, png_image_free_function, image);
      image->opaque = NULL;
   }
}

int /* PRIVATE */
png_image_error(png_imagep image, png_const_charp error_message)
{
   /* Utility to log an error. */
   png_safecat(image->message, (sizeof image->message), 0, error_message);
   image->warning_or_error |= PNG_IMAGE_ERROR;
   png_image_free(image);
   return 0;
}

#endif /* SIMPLIFIED READ/WRITE */
#endif /* defined(PNG_READ_SUPPORTED) || defined(PNG_WRITE_SUPPORTED) */