diff --git a/ANNOUNCE b/ANNOUNCE
index 04f88e2..e40b94a 100644
--- a/ANNOUNCE
+++ b/ANNOUNCE
@@ -1,55 +1,28 @@
 
-Libpng 1.2.8rc5 - November 29, 2004
+Libpng 1.2.8 - December 3, 2004
 
-This is not intended to be a public release.  It will be replaced
-within a few weeks by a public version or by another test version.
+This is a public release of libpng, intended for use in production codes.
 
 Changes since the last public release (1.2.7):
 
   Fixed bug in png_text_compress() that would fail to complete a large block.
-version 1.2.8beta1 [November 1, 2004]
   Fixed bug, introduced in libpng-1.2.7, that overruns a buffer during
     strip alpha operation in png_do_strip_filler().
   Added PNG_1_2_X definition in pngconf.h
   #ifdef out png_info_init in png.c and png_read_init in pngread.c (as of 1.3.0)
-version 1.2.8beta2 [November 2, 2004]
   Reduce color_type to a nonalpha type after strip alpha operation in
     png_do_strip_filler().
-version 1.2.8beta3 [November 3, 2004]
   Revised definitions of PNG_MAX_UINT_32, PNG_MAX_SIZE, and PNG_MAXSUM
-version 1.2.8beta4 [November 12, 2004]
   Fixed (again) definition of PNG_LIBPNG_VER_DLLNUM in png.h (Cosmin).
   Added PNG_LIBPNG_BUILD_PRIVATE in png.h (Cosmin).
   Set png_ptr->zstream.data_type to Z_BINARY, to avoid unnecessary detection
     of data type in deflate (Cosmin).
   Deprecated but continue to support SPECIALBUILD and PRIVATEBUILD in favor of
     PNG_LIBPNG_BUILD_SPECIAL_STRING and PNG_LIBPNG_BUILD_PRIVATE_STRING.
-version 1.2.8beta5 [November 20, 2004]
-  Use png_ptr->flags instead of png_ptr->transformations to pass
-    PNG_STRIP_ALPHA info to png_do_strip_filler(), to preserve ABI
-    compatibility.
-  Revised handling of SPECIALBUILD, PRIVATEBUILD, 
-    PNG_LIBPNG_BUILD_SPECIAL_STRING and PNG_LIBPNG_BUILD_PRIVATE_STRING.
-version 1.2.8rc1 [Novermber 24, 2004]
-  Inadvertently installed a supposedly faster test version of pngrutil.c
-  Moved handling of BUILD macros from pngconf.h to png.h
-  Added definition of PNG_LIBPNG_BASE_TYPE in png.h, inadvertently
-    omitted from beta5.
-  Revised scripts/pngw32.rc
   Despammed mailing addresses by masking "@" with "at".
-version 1.2.8rc2 [November 26, 2004]
-  Added two missing "\" in png.h
-  Change tests in pngread.c and pngpread.c to
-    if (png_ptr->transformations || (png_ptr->flags&PNG_FLAG_STRIP_ALPHA))
-       png_do_read_transformations(png_ptr);
-version 1.2.8rc3 [November 28, 2004]
-  Reverted pngrutil.c to version libpng-1.2.8beta5.
   Added scripts/makefile.elf with supporting code in pngconf.h for symbol
     versioning (John Bowler).
-version 1.2.8rc4 [November 29, 2004]
-  Added projects/visualc7 (Simon-pierre).
-version 1.2.8rc5 [November 29, 2004]
-  Fix new typo in scripts/pngw32.rc
+  Added projects/visualc71 (Simon-pierre).
 
 Send comments/corrections/commendations to
 png-implement at ccrc.wustl.edu (subscription required; write to
diff --git a/CHANGES b/CHANGES
index 6a2ffaf..90c816e 100644
--- a/CHANGES
+++ b/CHANGES
@@ -1407,7 +1407,9 @@
 version 1.2.8rc4 [November 29, 2004]
   Added projects/visualc7 (Simon-pierre).
 version 1.2.8rc5 [November 29, 2004]
-  Fix new typo in scripts/pngw32.rc
+  Fixed new typo in scripts/pngw32.rc
+version 1.2.8 [December 3, 2004]
+  Removed projects/visualc7, added projects/visualc71.
 
 Send comments/corrections/commendations to
 png-implement at ccrc.wustl.edu (subscription required; write to
diff --git a/INSTALL b/INSTALL
index 5e1312f..28de5aa 100644
--- a/INSTALL
+++ b/INSTALL
@@ -1,5 +1,5 @@
 
-Installing libpng version 1.2.8rc5 - November 29, 2004
+Installing libpng version 1.2.8 - %DATE%
 
 Before installing libpng, you must first install zlib.  zlib
 can usually be found wherever you got libpng.  zlib can be
@@ -10,8 +10,8 @@
 version of zlib that's installed.
 
 You can rename the directories that you downloaded (they
-might be called "libpng-1.2.8rc5" or "lpng109" and "zlib-1.2.1"
-or "zlib121") so that you have directories called "zlib" and "libpng".
+might be called "libpng-1.2.8" or "lpng109" and "zlib-1.1.3"
+or "zlib113") so that you have directories called "zlib" and "libpng".
 
 Your directory structure should look like this:
 
@@ -23,13 +23,14 @@
           *.c
           contrib
              gregbook
+             msvctest
              pngminus
              pngsuite
              visupng
           projects
              beos
-             c5builder (Borland)
-             visualc6 (msvc)
+             borland
+             msvc
              netware.txt
              wince.txt
           scripts
@@ -47,16 +48,13 @@
 distribution of libpng.  It is available in both tar.gz (UNIX style line
 endings) and zip (DOS style line endings) formats.
 
+If you are building libpng with MSVC, you can enter the libpng\msvc directory
+and follow the instructions in msvc\README.txt.
 
-If you are building libpng with MSVC, you can enter the
-libpng projects\visualc6 directory and follow the instructions in
-projects\visualc6\README.txt.
-
-You can build libpng for WindowsCE by downloading and installing
-the projects\wince directory as instructed in the projects\wince.txt file, and
+You can build libpng for WindowsCE by entering the downloading and installing
+the libpng\wince directory as instructed in the projects\wince.txt file, and
 then following the instructions in the README* files.  Similarly, you can
-build libpng for Netware or Beos as instructed in projects\netware.txt
-or projects\beos.
+build libpng for Netware as instructed in projects\netware.txt.
 
 Else enter the zlib directory and follow the instructions in zlib/README,
 then come back here and choose the appropriate makefile.sys in the scripts
@@ -66,12 +64,8 @@
 include
 
  makefile.std      =>  Generic UNIX makefile (cc, creates static libpng.a)
- makefile.elf      =>  Linux/ELF makefile symbol versioning,
-                       gcc, creates libpng12.so.0.1.2.8rc5)
- makefile.linux    =>  Linux/ELF makefile
-                       (gcc, creates libpng12.so.0.1.2.8rc5)
- makefile.gcmmx    =>  Linux/ELF makefile
-                       (gcc, creates libpng12.so.0.1.2.8rc5,
+ makefile.linux    =>  Linux/ELF makefile (gcc, creates libpng%SONAME%.so.%SONUM%.1.2.8)
+ makefile.gcmmx    =>  Linux/ELF makefile (gcc, creates libpng%SONAME%.so.%SONUM%.1.2.8,
                        uses assembler code tuned for Intel MMX platform)
  makefile.gcc      =>  Generic makefile (gcc, creates static libpng.a)
  makefile.knr      =>  Archaic UNIX Makefile that converts files with
@@ -79,27 +73,23 @@
                        ftp://ftp.cs.wisc.edu/ghost)
  makefile.aix      =>  AIX/gcc makefile
  makefile.cygwin   =>  Cygwin/gcc makefile
- makefile.darwin   =>  Darwin makefile, can use on MacosX
+ makefile.darwin   =>  Darwin makefile
  makefile.dec      =>  DEC Alpha UNIX makefile
- makefile.freebsd  =>  FreeBSD makefile
+ makefile.hpgcc    =>  FreeBSD makefile
  makefile.hpgcc    =>  HPUX makefile using gcc
  makefile.hpux     =>  HPUX (10.20 and 11.00) makefile
- makefile.hp64     =>  HPUX (10.20 and 11.00) makefile, 64-bit
  makefile.ibmc     =>  IBM C/C++ version 3.x for Win32 and OS/2 (static)
  makefile.intel    =>  Intel C/C++ version 4.0 and later
  libpng.icc        =>  Project file for IBM VisualAge/C++ version 4.0 or later
+ makefile.macosx   =>  MACOS X Makefile
  makefile.netbsd   =>  NetBSD/cc makefile, uses PNGGCCRD, makes libpng.so.
- makefile.ne12bsd  =>  NetBSD/cc makefile, uses PNGGCCRD,
-                       makes libpng12.so
+ makefile.ne%SONUM%bsd  =>  NetBSD/cc makefile, uses PNGGCCRD, makes libpng%SONUM%.so
  makefile.openbsd  =>  OpenBSD makefile
  makefile.sgi      =>  Silicon Graphics IRIX makefile (cc, creates static lib)
- makefile.sggcc    =>  Silicon Graphics (gcc,
-                       creates libpng12.so.0.1.2.8rc5)
+ makefile.sggcc    =>  Silicon Graphics (gcc, creates libpng%SONAME%.so.%SONUM%.1.2.8)
  makefile.sunos    =>  Sun makefile
- makefile.solaris  =>  Solaris 2.X makefile (gcc,
-                       creates libpng12.so.0.1.2.8rc5)
- makefile.so9      =>  Solaris 9 makefile (gcc,
-                       creates libpng12.so.0.1.2.8rc5)
+ makefile.solaris  =>  Solaris 2.X makefile (gcc, creates libpng%SONAME%.so.%SONUM%.1.2.8)
+ makefile.so9      =>  Solaris 9 makefile (gcc, creates libpng%SONAME%.so.%SONUM%.1.2.8)
  makefile.32sunu   =>  Sun Ultra 32-bit makefile
  makefile.64sunu   =>  Sun Ultra 64-bit makefile
  makefile.sco      =>  For SCO OSr5  ELF and Unixware 7 with Native cc
@@ -112,6 +102,7 @@
  makefile.beos     =>  BEOS makefile for X86
  makefile.bor      =>  Borland makefile (uses bcc)
  makefile.bc32     =>  32-bit Borland C++ (all modules compiled in C mode)
+ makefile.bd32     =>  To make a png32bd.dll with Borland C++ 4.5
  makefile.tc3      =>  Turbo C 3.0 makefile
  makefile.dj2      =>  DJGPP 2 makefile
  makefile.msc      =>  Microsoft C makefile
@@ -124,6 +115,7 @@
  makefile.watcom   =>  Watcom 10a+ Makefile, 32-bit flat memory model
  makevms.com       =>  VMS build script
  descrip.mms       =>  VMS makefile for MMS or MMK
+ pngdef.pas        =>  Defines for a png32bd.dll with Borland C++ 4.5
  SCOPTIONS.ppc     =>  Used with smakefile.ppc
 
 Copy the file (or files) that you need from the
@@ -138,13 +130,13 @@
 Then read pngconf.h to see if you want to make any configuration
 changes.
 
-Then just run "make" which will create the libpng library in
-this directory and "make test" which will run a quick test that reads
-the "pngtest.png" file and writes a "pngout.png" file that should be
-identical to it.  Look for "9782 zero samples" in the output of the
-test.  For more confidence, you can run another test by typing
-"pngtest pngnow.png" and looking for "289 zero samples" in the output.
-Also, you can run "pngtest -m contrib/pngsuite/*.png" and compare
+Then just run "make test" which will create the libpng library in
+this directory and run a quick test that reads the "pngtest.png"
+file and writes a "pngout.png" file that should be identical to it.
+Look for "9782 zero samples" in the output of the test.  For more
+confidence, you can run another test by typing "pngtest pngnow.png"
+and looking for "289 zero samples" in the output.  Also, you can
+run "pngtest -m *.png" in the "contrib/pngsuite" directory and compare
 your output with the result shown in contrib/pngsuite/README.
 
 Most of the makefiles will allow you to run "make install" to
@@ -153,17 +145,26 @@
 Some also allow you to run "make test-installed" after you have
 run "make install".
 
-If you encounter a compiler error message complaining about the
-lines
-      __png.h__ already includes setjmp.h;
-      __dont__ include it again.;
-This means you have compiled another module that includes setjmp.h,
-which is hazardous because the two modules might not include exactly
-the same setjmp.h.  If you are sure that you know what you are doing
-and that they are exactly the same, then you can comment out or
-delete the two lines.  Better yet, use the cexcept interface
-instead, as demonstrated in contrib/visupng of the libpng distribution.
-
 Further information can be found in the README and libpng.txt
-files, in the individual makefiles, in png.h, and the manual pages
-libpng.3 and png.5.
+files, in the individual makefiles, in png.h, in the README files in
+subdirectories of the LIB directory, and the manual pages libpng.3 and png.5.
+
+
+Using the ./configure script -- 16 December 2002.
+=================================================
+
+
+The ./configure script should work compatibly with what scripts/makefile.*
+did, however there are some options you need to add to configure explicitly,
+which previously was done semi-automatically (if you didn't edit
+scripts/makefile.* yourself, that is)
+
+
+CFLAGS="-Wall -O3 -funroll-loops \
+-malign-loops=2 -malign-functions=2" ./configure --prefix=/usr/include \
+--with-pkgconfigdir=/usr/lib/pkgconfig --includedir=/usr/include
+
+You can alternatively specify --includedir=/usr/include, /usr/local/include,
+/usr/include/png12, or whatever.
+
+
diff --git a/KNOWNBUG b/KNOWNBUG
index a860358..620296f 100644
--- a/KNOWNBUG
+++ b/KNOWNBUG
@@ -1,5 +1,5 @@
 
-Known bugs in libpng version 1.2.8rc5
+Known bugs in libpng version 1.2.8
 
 1. April 22, 2001: pnggccrd.c has been reported to crash on NetBSD when
    reading interlaced PNG files, when assembler code is enabled but running
diff --git a/LICENSE b/LICENSE
index 3add698..fe3ac4b 100644
--- a/LICENSE
+++ b/LICENSE
@@ -8,7 +8,7 @@
 If you modify libpng you may insert additional notices immediately following
 this sentence.
 
-libpng version 1.2.6, November 29, 2004, is
+libpng version 1.2.6, December 3, 2004, is
 Copyright (c) 2004 Glenn Randers-Pehrson, and is
 distributed according to the same disclaimer and license as libpng-1.2.5
 with the following individual added to the list of Contributing Authors
@@ -106,4 +106,4 @@
 
 Glenn Randers-Pehrson
 glennrp at users.sourceforge.net
-November 29, 2004
+December 3, 2004
diff --git a/Makefile.am b/Makefile.am
new file mode 100644
index 0000000..027be06
--- /dev/null
+++ b/Makefile.am
@@ -0,0 +1,66 @@
+# test
+check_PROGRAMS= pngtest
+pngtest_SOURCES = pngtest.c
+pngtest_LDADD = libpng.la
+TESTS = test-pngtest.sh
+TESTS_ENVIRONMENT= srcdir=$(srcdir) 
+dist_man_MANS= libpng.3 libpngpf.3 png.5
+include_HEADERS= png.h pngconf.h 
+bin_SCRIPTS=libpng-config libpng12-config 
+
+#rules to build libpng
+lib_LTLIBRARIES=libpng12.la libpng.la
+libpng12_la_SOURCES = png.c pngset.c pngget.c pngrutil.c pngtrans.c pngwutil.c \
+	pngread.c pngrio.c pngwio.c pngwrite.c pngrtran.c \
+	pngwtran.c pngmem.c pngerror.c pngpread.c \
+	png.h pngconf.h 
+libpng_la_SOURCES = $(libpng12_la_SOURCES)
+libpng12_la_LDFLAGS = -export-dynamic -version-info $(LIBPNG12_VERSION_INFO)
+libpng_la_LDFLAGS = -export-dynamic -version-info $(LIBPNG3_VERSION_INFO)
+
+#distribute headers in /usr/include/libpng/*
+pkginclude_HEADERS= png.h pngconf.h
+
+#extra source distribution files.
+EXTRA_DIST= ANNOUNCE CHANGES INSTALL KNOWNBUG LICENSE README TODO Y2KINFO \
+	pngtest.png pngbar.png pngnow.png pngbar.jpg autogen.sh \
+	${srcdir}/projects/cbuilder5/* ${srcdir}/projects/beos/* ${srcdir}/projects/visualc6/* \
+	${srcdir}/projects/wince.txt ${srcdir}/projects/netware.txt \
+	${srcdir}/scripts/* \
+	${srcdir}/contrib/gregbook/* \
+	${srcdir}/contrib/pngminus/* \
+	${srcdir}/contrib/pngsuite/* \
+	${srcdir}/contrib/visupng/* \
+	$(TESTS) \
+	example.c libpng.txt pngasmrd.h pnggccrd.c pngvcrd.c 
+
+CLEANFILES= pngout.png libpng.pc libpng12.pc libpng-config libpng12-config
+
+
+libpng.pc:
+	cat ${srcdir}/scripts/libpng.pc.in | \
+	sed -e 's,[@]PREFIX[@],$(prefix),' -e 's,[@]INCLUDEDIR[@],$(includedir),' > libpng.pc
+
+libpng12.pc: libpng.pc
+	cp libpng.pc libpng12.pc
+
+install-data-local: libpng.pc libpng12.pc
+	@INSTALL@ -d @PKGCONFIGDIR@
+	@INSTALL_DATA@ libpng.pc @PKGCONFIGDIR@
+	@INSTALL_DATA@ libpng12.pc @PKGCONFIGDIR@
+
+uninstall-local:
+	rm -f @PKGCONFIGDIR@/libpng.pc
+	rm -f @PKGCONFIGDIR@/libpng12.pc
+
+libpng-config:
+	( cat ${srcdir}/scripts/libpng-config-head.in; \
+	echo prefix=\"$(prefix)\"; \
+	echo I_opts=\"-I$(includedir)\"; \
+	echo L_opts=\"-L$(libdir)\"; \
+	echo R_opts=\"-Wl,-rpath,$(libdir)\"; \
+	echo libs=\"-lpng12 -lz -lm\"; \
+	cat ${srcdir}/scripts/libpng-config-body.in ) > libpng-config
+
+libpng12-config: libpng-config
+	cp libpng-config libpng12-config
diff --git a/Makefile.in b/Makefile.in
new file mode 100644
index 0000000..f845e2d
--- /dev/null
+++ b/Makefile.in
@@ -0,0 +1,898 @@
+# Makefile.in generated by automake 1.7.2 from Makefile.am.
+# @configure_input@
+
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
+# Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = .
+
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_triplet = @host@
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO = @ECHO@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBPNG12_VERSION_INFO = @LIBPNG12_VERSION_INFO@
+LIBPNG3_VERSION_INFO = @LIBPNG3_VERSION_INFO@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PKGCONFIGDIR = @PKGCONFIGDIR@
+POW_LIB = @POW_LIB@
+RANLIB = @RANLIB@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_RANLIB = @ac_ct_RANLIB@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__quote = @am__quote@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+
+# test
+check_PROGRAMS = pngtest
+pngtest_SOURCES = pngtest.c
+pngtest_LDADD = libpng.la
+TESTS = test-pngtest.sh
+TESTS_ENVIRONMENT = srcdir=$(srcdir) 
+dist_man_MANS = libpng.3 libpngpf.3 png.5
+include_HEADERS = png.h pngconf.h 
+bin_SCRIPTS = libpng-config libpng12-config 
+
+#rules to build libpng
+lib_LTLIBRARIES = libpng12.la libpng.la
+libpng12_la_SOURCES = png.c pngset.c pngget.c pngrutil.c pngtrans.c pngwutil.c \
+	pngread.c pngrio.c pngwio.c pngwrite.c pngrtran.c \
+	pngwtran.c pngmem.c pngerror.c pngpread.c \
+	png.h pngconf.h 
+
+libpng_la_SOURCES = $(libpng12_la_SOURCES)
+libpng12_la_LDFLAGS = -export-dynamic -version-info $(LIBPNG12_VERSION_INFO)
+libpng_la_LDFLAGS = -export-dynamic -version-info $(LIBPNG3_VERSION_INFO)
+
+#distribute headers in /usr/include/libpng/*
+pkginclude_HEADERS = png.h pngconf.h
+
+#extra source distribution files.
+EXTRA_DIST = ANNOUNCE CHANGES INSTALL KNOWNBUG LICENSE README TODO Y2KINFO \
+	pngtest.png pngbar.png pngnow.png pngbar.jpg autogen.sh \
+	${srcdir}/projects/borland/* ${srcdir}/projects/beos/* ${srcdir}/projects/msvc/* \
+	${srcdir}/projects/wince.txt ${srcdir}/projects/netware.txt \
+	${srcdir}/scripts/* \
+	${srcdir}/contrib/gregbook/* \
+	${srcdir}/contrib/msvctest/* \
+	${srcdir}/contrib/pngminus/* \
+	${srcdir}/contrib/pngsuite/* \
+	${srcdir}/contrib/visupng/* \
+	$(TESTS) \
+	example.c libpng.txt pngasmrd.h pnggccrd.c pngvcrd.c 
+
+
+CLEANFILES = pngout.png libpng.pc libpng12.pc libpng-config libpng12-config
+subdir = .
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = config.h
+CONFIG_CLEAN_FILES =
+LTLIBRARIES = $(lib_LTLIBRARIES)
+
+libpng_la_LIBADD =
+am__objects_1 = png.lo pngset.lo pngget.lo pngrutil.lo pngtrans.lo \
+	pngwutil.lo pngread.lo pngrio.lo pngwio.lo pngwrite.lo \
+	pngrtran.lo pngwtran.lo pngmem.lo pngerror.lo pngpread.lo
+am_libpng_la_OBJECTS = $(am__objects_1)
+libpng_la_OBJECTS = $(am_libpng_la_OBJECTS)
+libpng12_la_LIBADD =
+am_libpng12_la_OBJECTS = png.lo pngset.lo pngget.lo pngrutil.lo \
+	pngtrans.lo pngwutil.lo pngread.lo pngrio.lo pngwio.lo \
+	pngwrite.lo pngrtran.lo pngwtran.lo pngmem.lo pngerror.lo \
+	pngpread.lo
+libpng12_la_OBJECTS = $(am_libpng12_la_OBJECTS)
+check_PROGRAMS = pngtest$(EXEEXT)
+am_pngtest_OBJECTS = pngtest.$(OBJEXT)
+pngtest_OBJECTS = $(am_pngtest_OBJECTS)
+pngtest_DEPENDENCIES = libpng.la
+pngtest_LDFLAGS =
+SCRIPTS = $(bin_SCRIPTS)
+
+
+DEFAULT_INCLUDES =  -I. -I$(srcdir) -I.
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+am__depfiles_maybe = depfiles
+@AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/png.Plo ./$(DEPDIR)/pngerror.Plo \
+@AMDEP_TRUE@	./$(DEPDIR)/pngget.Plo ./$(DEPDIR)/pngmem.Plo \
+@AMDEP_TRUE@	./$(DEPDIR)/pngpread.Plo ./$(DEPDIR)/pngread.Plo \
+@AMDEP_TRUE@	./$(DEPDIR)/pngrio.Plo ./$(DEPDIR)/pngrtran.Plo \
+@AMDEP_TRUE@	./$(DEPDIR)/pngrutil.Plo ./$(DEPDIR)/pngset.Plo \
+@AMDEP_TRUE@	./$(DEPDIR)/pngtest.Po ./$(DEPDIR)/pngtrans.Plo \
+@AMDEP_TRUE@	./$(DEPDIR)/pngwio.Plo ./$(DEPDIR)/pngwrite.Plo \
+@AMDEP_TRUE@	./$(DEPDIR)/pngwtran.Plo ./$(DEPDIR)/pngwutil.Plo
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) \
+	$(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+DIST_SOURCES = $(libpng_la_SOURCES) $(libpng12_la_SOURCES) \
+	$(pngtest_SOURCES)
+
+NROFF = nroff
+MANS = $(dist_man_MANS)
+HEADERS = $(include_HEADERS) $(pkginclude_HEADERS)
+
+DIST_COMMON = README $(dist_man_MANS) $(include_HEADERS) \
+	$(pkginclude_HEADERS) INSTALL Makefile.am Makefile.in TODO \
+	aclocal.m4 config.guess config.h.in config.sub configure \
+	configure.ac depcomp install-sh ltmain.sh missing mkinstalldirs
+SOURCES = $(libpng_la_SOURCES) $(libpng12_la_SOURCES) $(pngtest_SOURCES)
+
+all: config.h
+	$(MAKE) $(AM_MAKEFLAGS) all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .o .obj
+
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno
+$(srcdir)/Makefile.in:  Makefile.am  $(top_srcdir)/configure.ac $(ACLOCAL_M4)
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign  Makefile
+Makefile:  $(srcdir)/Makefile.in  $(top_builddir)/config.status
+	cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)
+
+$(top_builddir)/config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	$(SHELL) ./config.status --recheck
+$(srcdir)/configure:  $(srcdir)/configure.ac $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
+	cd $(srcdir) && $(AUTOCONF)
+
+$(ACLOCAL_M4):  configure.ac 
+	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+
+config.h: stamp-h1
+	@if test ! -f $@; then \
+	  rm -f stamp-h1; \
+	  $(MAKE) stamp-h1; \
+	else :; fi
+
+stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
+	@rm -f stamp-h1
+	cd $(top_builddir) && $(SHELL) ./config.status config.h
+
+$(srcdir)/config.h.in:  $(top_srcdir)/configure.ac $(ACLOCAL_M4) 
+	cd $(top_srcdir) && $(AUTOHEADER)
+	touch $(srcdir)/config.h.in
+
+distclean-hdr:
+	-rm -f config.h stamp-h1
+libLTLIBRARIES_INSTALL = $(INSTALL)
+install-libLTLIBRARIES: $(lib_LTLIBRARIES)
+	@$(NORMAL_INSTALL)
+	$(mkinstalldirs) $(DESTDIR)$(libdir)
+	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+	  if test -f $$p; then \
+	    f="`echo $$p | sed -e 's|^.*/||'`"; \
+	    echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) $$p $(DESTDIR)$(libdir)/$$f"; \
+	    $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) $$p $(DESTDIR)$(libdir)/$$f; \
+	  else :; fi; \
+	done
+
+uninstall-libLTLIBRARIES:
+	@$(NORMAL_UNINSTALL)
+	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+	    p="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p"; \
+	  $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p; \
+	done
+
+clean-libLTLIBRARIES:
+	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
+	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
+	  test "$$dir" = "$$p" && dir=.; \
+	  echo "rm -f \"$${dir}/so_locations\""; \
+	  rm -f "$${dir}/so_locations"; \
+	done
+libpng.la: $(libpng_la_OBJECTS) $(libpng_la_DEPENDENCIES) 
+	$(LINK) -rpath $(libdir) $(libpng_la_LDFLAGS) $(libpng_la_OBJECTS) $(libpng_la_LIBADD) $(LIBS)
+libpng12.la: $(libpng12_la_OBJECTS) $(libpng12_la_DEPENDENCIES) 
+	$(LINK) -rpath $(libdir) $(libpng12_la_LDFLAGS) $(libpng12_la_OBJECTS) $(libpng12_la_LIBADD) $(LIBS)
+
+clean-checkPROGRAMS:
+	@list='$(check_PROGRAMS)'; for p in $$list; do \
+	  f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
+	  echo " rm -f $$p $$f"; \
+	  rm -f $$p $$f ; \
+	done
+pngtest$(EXEEXT): $(pngtest_OBJECTS) $(pngtest_DEPENDENCIES) 
+	@rm -f pngtest$(EXEEXT)
+	$(LINK) $(pngtest_LDFLAGS) $(pngtest_OBJECTS) $(pngtest_LDADD) $(LIBS)
+binSCRIPT_INSTALL = $(INSTALL_SCRIPT)
+install-binSCRIPTS: $(bin_SCRIPTS)
+	@$(NORMAL_INSTALL)
+	$(mkinstalldirs) $(DESTDIR)$(bindir)
+	@list='$(bin_SCRIPTS)'; for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  if test -f $$d$$p; then \
+	    f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
+	    echo " $(binSCRIPT_INSTALL) $$d$$p $(DESTDIR)$(bindir)/$$f"; \
+	    $(binSCRIPT_INSTALL) $$d$$p $(DESTDIR)$(bindir)/$$f; \
+	  else :; fi; \
+	done
+
+uninstall-binSCRIPTS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_SCRIPTS)'; for p in $$list; do \
+	  f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
+	  echo " rm -f $(DESTDIR)$(bindir)/$$f"; \
+	  rm -f $(DESTDIR)$(bindir)/$$f; \
+	done
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT) core *.core
+
+distclean-compile:
+	-rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/png.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngerror.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngget.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngmem.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngpread.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngread.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngrio.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngrtran.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngrutil.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngset.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngtest.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngtrans.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngwio.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngwrite.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngwtran.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngwutil.Plo@am__quote@
+
+distclean-depend:
+	-rm -rf ./$(DEPDIR)
+
+.c.o:
+@am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \
+@am__fastdepCC_TRUE@	  -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<; \
+@am__fastdepCC_TRUE@	then mv "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; \
+@am__fastdepCC_TRUE@	else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \
+@am__fastdepCC_TRUE@	fi
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$<
+
+.c.obj:
+@am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \
+@am__fastdepCC_TRUE@	  -c -o $@ `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'; fi`; \
+@am__fastdepCC_TRUE@	then mv "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; \
+@am__fastdepCC_TRUE@	else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \
+@am__fastdepCC_TRUE@	fi
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(COMPILE) -c `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'; fi`
+
+.c.lo:
+@am__fastdepCC_TRUE@	if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \
+@am__fastdepCC_TRUE@	  -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<; \
+@am__fastdepCC_TRUE@	then mv "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; \
+@am__fastdepCC_TRUE@	else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \
+@am__fastdepCC_TRUE@	fi
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/$*.Plo' tmpdepfile='$(DEPDIR)/$*.TPlo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool
+uninstall-info-am:
+
+man3dir = $(mandir)/man3
+install-man3: $(man3_MANS) $(man_MANS)
+	@$(NORMAL_INSTALL)
+	$(mkinstalldirs) $(DESTDIR)$(man3dir)
+	@list='$(man3_MANS) $(dist_man3_MANS) $(nodist_man3_MANS)'; \
+	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
+	for i in $$l2; do \
+	  case "$$i" in \
+	    *.3*) list="$$list $$i" ;; \
+	  esac; \
+	done; \
+	for i in $$list; do \
+	  if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
+	  else file=$$i; fi; \
+	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
+	  case "$$ext" in \
+	    3*) ;; \
+	    *) ext='3' ;; \
+	  esac; \
+	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
+	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
+	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
+	  echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man3dir)/$$inst"; \
+	  $(INSTALL_DATA) $$file $(DESTDIR)$(man3dir)/$$inst; \
+	done
+uninstall-man3:
+	@$(NORMAL_UNINSTALL)
+	@list='$(man3_MANS) $(dist_man3_MANS) $(nodist_man3_MANS)'; \
+	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
+	for i in $$l2; do \
+	  case "$$i" in \
+	    *.3*) list="$$list $$i" ;; \
+	  esac; \
+	done; \
+	for i in $$list; do \
+	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
+	  case "$$ext" in \
+	    3*) ;; \
+	    *) ext='3' ;; \
+	  esac; \
+	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
+	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
+	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
+	  echo " rm -f $(DESTDIR)$(man3dir)/$$inst"; \
+	  rm -f $(DESTDIR)$(man3dir)/$$inst; \
+	done
+
+man5dir = $(mandir)/man5
+install-man5: $(man5_MANS) $(man_MANS)
+	@$(NORMAL_INSTALL)
+	$(mkinstalldirs) $(DESTDIR)$(man5dir)
+	@list='$(man5_MANS) $(dist_man5_MANS) $(nodist_man5_MANS)'; \
+	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
+	for i in $$l2; do \
+	  case "$$i" in \
+	    *.5*) list="$$list $$i" ;; \
+	  esac; \
+	done; \
+	for i in $$list; do \
+	  if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
+	  else file=$$i; fi; \
+	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
+	  case "$$ext" in \
+	    5*) ;; \
+	    *) ext='5' ;; \
+	  esac; \
+	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
+	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
+	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
+	  echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man5dir)/$$inst"; \
+	  $(INSTALL_DATA) $$file $(DESTDIR)$(man5dir)/$$inst; \
+	done
+uninstall-man5:
+	@$(NORMAL_UNINSTALL)
+	@list='$(man5_MANS) $(dist_man5_MANS) $(nodist_man5_MANS)'; \
+	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
+	for i in $$l2; do \
+	  case "$$i" in \
+	    *.5*) list="$$list $$i" ;; \
+	  esac; \
+	done; \
+	for i in $$list; do \
+	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
+	  case "$$ext" in \
+	    5*) ;; \
+	    *) ext='5' ;; \
+	  esac; \
+	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
+	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
+	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
+	  echo " rm -f $(DESTDIR)$(man5dir)/$$inst"; \
+	  rm -f $(DESTDIR)$(man5dir)/$$inst; \
+	done
+includeHEADERS_INSTALL = $(INSTALL_HEADER)
+install-includeHEADERS: $(include_HEADERS)
+	@$(NORMAL_INSTALL)
+	$(mkinstalldirs) $(DESTDIR)$(includedir)
+	@list='$(include_HEADERS)'; for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " $(includeHEADERS_INSTALL) $$d$$p $(DESTDIR)$(includedir)/$$f"; \
+	  $(includeHEADERS_INSTALL) $$d$$p $(DESTDIR)$(includedir)/$$f; \
+	done
+
+uninstall-includeHEADERS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(include_HEADERS)'; for p in $$list; do \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " rm -f $(DESTDIR)$(includedir)/$$f"; \
+	  rm -f $(DESTDIR)$(includedir)/$$f; \
+	done
+pkgincludeHEADERS_INSTALL = $(INSTALL_HEADER)
+install-pkgincludeHEADERS: $(pkginclude_HEADERS)
+	@$(NORMAL_INSTALL)
+	$(mkinstalldirs) $(DESTDIR)$(pkgincludedir)
+	@list='$(pkginclude_HEADERS)'; for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " $(pkgincludeHEADERS_INSTALL) $$d$$p $(DESTDIR)$(pkgincludedir)/$$f"; \
+	  $(pkgincludeHEADERS_INSTALL) $$d$$p $(DESTDIR)$(pkgincludedir)/$$f; \
+	done
+
+uninstall-pkgincludeHEADERS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(pkginclude_HEADERS)'; for p in $$list; do \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " rm -f $(DESTDIR)$(pkgincludedir)/$$f"; \
+	  rm -f $(DESTDIR)$(pkgincludedir)/$$f; \
+	done
+
+ETAGS = etags
+ETAGSFLAGS =
+
+CTAGS = ctags
+CTAGSFLAGS =
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	mkid -fID $$unique
+
+TAGS:  $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(ETAGS_ARGS)$$tags$$unique" \
+	  || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	     $$tags $$unique
+
+ctags: CTAGS
+CTAGS:  $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$tags $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+check-TESTS: $(TESTS)
+	@failed=0; all=0; xfail=0; xpass=0; skip=0; \
+	srcdir=$(srcdir); export srcdir; \
+	list='$(TESTS)'; \
+	if test -n "$$list"; then \
+	  for tst in $$list; do \
+	    if test -f ./$$tst; then dir=./; \
+	    elif test -f $$tst; then dir=; \
+	    else dir="$(srcdir)/"; fi; \
+	    if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+	      all=`expr $$all + 1`; \
+	      case " $(XFAIL_TESTS) " in \
+	      *" $$tst "*) \
+	        xpass=`expr $$xpass + 1`; \
+	        failed=`expr $$failed + 1`; \
+	        echo "XPASS: $$tst"; \
+	      ;; \
+	      *) \
+	        echo "PASS: $$tst"; \
+	      ;; \
+	      esac; \
+	    elif test $$? -ne 77; then \
+	      all=`expr $$all + 1`; \
+	      case " $(XFAIL_TESTS) " in \
+	      *" $$tst "*) \
+	        xfail=`expr $$xfail + 1`; \
+	        echo "XFAIL: $$tst"; \
+	      ;; \
+	      *) \
+	        failed=`expr $$failed + 1`; \
+	        echo "FAIL: $$tst"; \
+	      ;; \
+	      esac; \
+	    else \
+	      skip=`expr $$skip + 1`; \
+	      echo "SKIP: $$tst"; \
+	    fi; \
+	  done; \
+	  if test "$$failed" -eq 0; then \
+	    if test "$$xfail" -eq 0; then \
+	      banner="All $$all tests passed"; \
+	    else \
+	      banner="All $$all tests behaved as expected ($$xfail expected failures)"; \
+	    fi; \
+	  else \
+	    if test "$$xpass" -eq 0; then \
+	      banner="$$failed of $$all tests failed"; \
+	    else \
+	      banner="$$failed of $$all tests did not behave as expected ($$xpass unexpected passes)"; \
+	    fi; \
+	  fi; \
+	  dashes="$$banner"; \
+	  skipped=""; \
+	  if test "$$skip" -ne 0; then \
+	    skipped="($$skip tests were not run)"; \
+	    test `echo "$$skipped" | wc -c` -gt `echo "$$banner" | wc -c` && \
+	      dashes="$$skipped"; \
+	  fi; \
+	  report=""; \
+	  if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
+	    report="Please report to $(PACKAGE_BUGREPORT)"; \
+	    test `echo "$$report" | wc -c` -gt `echo "$$banner" | wc -c` && \
+	      dashes="$$report"; \
+	  fi; \
+	  dashes=`echo "$$dashes" | sed s/./=/g`; \
+	  echo "$$dashes"; \
+	  echo "$$banner"; \
+	  test -n "$$skipped" && echo "$$skipped"; \
+	  test -n "$$report" && echo "$$report"; \
+	  echo "$$dashes"; \
+	  test "$$failed" -eq 0; \
+	else :; fi
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+
+top_distdir = .
+distdir = $(PACKAGE)-$(VERSION)
+
+am__remove_distdir = \
+  { test ! -d $(distdir) \
+    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
+         && rm -fr $(distdir); }; }
+
+GZIP_ENV = --best
+distuninstallcheck_listfiles = find . -type f -print
+distcleancheck_listfiles = find . -type f -print
+
+distdir: $(DISTFILES)
+	$(am__remove_distdir)
+	mkdir $(distdir)
+	$(mkinstalldirs) $(distdir)/${srcdir}/contrib/gregbook $(distdir)/${srcdir}/contrib/msvctest $(distdir)/${srcdir}/contrib/pngminus $(distdir)/${srcdir}/contrib/pngsuite $(distdir)/${srcdir}/contrib/visupng $(distdir)/${srcdir}/projects $(distdir)/${srcdir}/projects/beos $(distdir)/${srcdir}/projects/borland $(distdir)/${srcdir}/projects/msvc $(distdir)/${srcdir}/scripts
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	list='$(DISTFILES)'; for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	  esac; \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkinstalldirs) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
+	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
+	|| chmod -R a+r $(distdir)
+dist-gzip: distdir
+	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(am__remove_distdir)
+
+dist dist-all: distdir
+	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(am__remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration.  Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+	$(am__remove_distdir)
+	GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf -
+	chmod -R a-w $(distdir); chmod a+w $(distdir)
+	mkdir $(distdir)/=build
+	mkdir $(distdir)/=inst
+	chmod a-w $(distdir)
+	dc_install_base=`$(am__cd) $(distdir)/=inst && pwd` \
+	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+	  && cd $(distdir)/=build \
+	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+	    $(DISTCHECK_CONFIGURE_FLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
+	  && $(MAKE) $(AM_MAKEFLAGS) check \
+	  && $(MAKE) $(AM_MAKEFLAGS) install \
+	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+	        distuninstallcheck \
+	  && chmod -R a-w "$$dc_install_base" \
+	  && ({ \
+	       (cd ../.. && $(mkinstalldirs) "$$dc_destdir") \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
+	  && rm -rf "$$dc_destdir" \
+	  && $(MAKE) $(AM_MAKEFLAGS) dist-gzip \
+	  && rm -f $(distdir).tar.gz \
+	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
+	$(am__remove_distdir)
+	@echo "$(distdir).tar.gz is ready for distribution" | \
+	  sed 'h;s/./=/g;p;x;p;x'
+distuninstallcheck:
+	cd $(distuninstallcheck_dir) \
+	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
+	   || { echo "ERROR: files left after uninstall:" ; \
+	        if test -n "$(DESTDIR)"; then \
+	          echo "  (check DESTDIR support)"; \
+	        fi ; \
+	        $(distuninstallcheck_listfiles) ; \
+	        exit 1; } >&2
+distcleancheck: distclean
+	if test '$(srcdir)' = . ; then \
+	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+	  exit 1 ; \
+	fi
+	test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+	  || { echo "ERROR: files left in build directory after distclean:" ; \
+	       $(distcleancheck_listfiles) ; \
+	       exit 1; } >&2
+check-am: all-am
+	$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS)
+	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-am
+all-am: Makefile $(LTLIBRARIES) $(SCRIPTS) $(MANS) $(HEADERS) config.h
+
+installdirs:
+	$(mkinstalldirs) $(DESTDIR)$(libdir) $(DESTDIR)$(bindir) $(DESTDIR)$(man3dir) $(DESTDIR)$(man5dir) $(DESTDIR)$(includedir) $(DESTDIR)$(pkgincludedir)
+
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-checkPROGRAMS clean-generic clean-libLTLIBRARIES \
+	clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+distclean-am: clean-am distclean-compile distclean-depend \
+	distclean-generic distclean-hdr distclean-libtool \
+	distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-data-local install-includeHEADERS install-man \
+	install-pkgincludeHEADERS
+
+install-exec-am: install-binSCRIPTS install-libLTLIBRARIES
+
+install-info: install-info-am
+
+install-man: install-man3 install-man5
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -rf autom4te.cache
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-binSCRIPTS uninstall-includeHEADERS \
+	uninstall-info-am uninstall-libLTLIBRARIES uninstall-local \
+	uninstall-man uninstall-pkgincludeHEADERS
+
+uninstall-man: uninstall-man3 uninstall-man5
+
+.PHONY: CTAGS GTAGS all all-am check check-TESTS check-am clean \
+	clean-checkPROGRAMS clean-generic clean-libLTLIBRARIES \
+	clean-libtool ctags dist dist-all dist-gzip distcheck distclean \
+	distclean-compile distclean-depend distclean-generic \
+	distclean-hdr distclean-libtool distclean-tags distcleancheck \
+	distdir distuninstallcheck dvi dvi-am info info-am install \
+	install-am install-binSCRIPTS install-data install-data-am \
+	install-data-local install-exec install-exec-am \
+	install-includeHEADERS install-info install-info-am \
+	install-libLTLIBRARIES install-man install-man3 install-man5 \
+	install-pkgincludeHEADERS install-strip installcheck \
+	installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-compile \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags uninstall uninstall-am uninstall-binSCRIPTS \
+	uninstall-includeHEADERS uninstall-info-am \
+	uninstall-libLTLIBRARIES uninstall-local uninstall-man \
+	uninstall-man3 uninstall-man5 uninstall-pkgincludeHEADERS
+
+
+libpng.pc:
+	cat ${srcdir}/scripts/libpng.pc.in | \
+	sed -e 's,[@]PREFIX[@],$(prefix),' -e 's,[@]INCLUDEDIR[@],$(includedir),' > libpng.pc
+
+libpng12.pc: libpng.pc
+	cp libpng.pc libpng12.pc
+
+install-data-local: libpng.pc libpng12.pc
+	@INSTALL@ -d @PKGCONFIGDIR@
+	@INSTALL_DATA@ libpng.pc @PKGCONFIGDIR@
+	@INSTALL_DATA@ libpng12.pc @PKGCONFIGDIR@
+
+uninstall-local:
+	rm -f @PKGCONFIGDIR@/libpng.pc
+	rm -f @PKGCONFIGDIR@/libpng12.pc
+
+libpng-config:
+	( cat ${srcdir}/scripts/libpng-config-head.in; \
+	echo prefix=\"$(prefix)\"; \
+	echo I_opts=\"-I$(includedir)\"; \
+	echo L_opts=\"-L$(libdir)\"; \
+	echo R_opts=\"-Wl,-rpath,$(libdir)\"; \
+	echo libs=\"-lpng12 -lz -lm\"; \
+	cat ${srcdir}/scripts/libpng-config-body.in ) > libpng-config
+
+libpng12-config: libpng-config
+	cp libpng-config libpng12-config
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/README b/README
index 0ef6a50..06f9fe4 100644
--- a/README
+++ b/README
@@ -1,4 +1,4 @@
-README for libpng version 1.2.8rc5 - November 29, 2004 (shared library 12.0)
+README for libpng version 1.2.8 - December 3, 2004 (shared library 12.0)
 See the note about version numbers near the top of png.h
 
 See INSTALL for instructions on how to install libpng.
@@ -189,11 +189,11 @@
        descrip.mms      =>  VMS makefile for MMS or MMK
        makefile.std     =>  Generic UNIX makefile (cc, creates static libpng.a)
        makefile.elf     =>  Linux/ELF makefile symbol versioning,
-                            gcc, creates libpng12.so.0.1.2.8rc5)
+                            gcc, creates libpng12.so.0.1.2.8)
        makefile.linux   =>  Linux/ELF makefile
-                            (gcc, creates libpng12.so.0.1.2.8rc5)
+                            (gcc, creates libpng12.so.0.1.2.8)
        makefile.gcmmx   =>  Linux/ELF makefile
-                            (gcc, creates libpng12.so.0.1.2.8rc5,
+                            (gcc, creates libpng12.so.0.1.2.8,
                             uses assembler code tuned for Intel MMX platform)
        makefile.gcc     =>  Generic makefile (gcc, creates static libpng.a)
        makefile.knr     =>  Archaic UNIX Makefile that converts files with
@@ -215,12 +215,12 @@
        makefile.openbsd =>  OpenBSD makefile
        makefile.sgi     =>  Silicon Graphics IRIX (cc, creates static lib)
        makefile.sggcc   =>  Silicon Graphics
-                            (gcc, creates libpng12.so.0.1.2.8rc5)
+                            (gcc, creates libpng12.so.0.1.2.8)
        makefile.sunos   =>  Sun makefile
        makefile.solaris =>  Solaris 2.X makefile
-                            (gcc, creates libpng12.so.0.1.2.8rc5)
+                            (gcc, creates libpng12.so.0.1.2.8)
        makefile.so9     =>  Solaris 9 makefile
-                            (gcc, creates libpng12.so.0.1.2.8rc5)
+                            (gcc, creates libpng12.so.0.1.2.8)
        makefile.32sunu  =>  Sun Ultra 32-bit makefile
        makefile.64sunu  =>  Sun Ultra 64-bit makefile
        makefile.sco     =>  For SCO OSr5  ELF and Unixware 7 with Native cc
diff --git a/Y2KINFO b/Y2KINFO
index 4ec2fff..4db294f 100644
--- a/Y2KINFO
+++ b/Y2KINFO
@@ -1,13 +1,13 @@
    Y2K compliance in libpng:
    =========================
 
-      November 29, 2004
+      December 3, 2004
 
       Since the PNG Development group is an ad-hoc body, we can't make
       an official declaration.
 
       This is your unofficial assurance that libpng from version 0.71 and
-      upward through 1.2.8rc5 are Y2K compliant.  It is my belief that earlier
+      upward through 1.2.8 are Y2K compliant.  It is my belief that earlier
       versions were also Y2K compliant.
 
       Libpng only has three year fields.  One is a 2-byte unsigned integer
diff --git a/aclocal.m4 b/aclocal.m4
new file mode 100644
index 0000000..78bb771
--- /dev/null
+++ b/aclocal.m4
@@ -0,0 +1,4445 @@
+# generated automatically by aclocal 1.7.2 -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002
+# Free Software Foundation, Inc.
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+# Do all the work for Automake.                            -*- Autoconf -*-
+
+# This macro actually does too much some checks are only needed if
+# your package does certain things.  But this isn't really a big deal.
+
+# Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2002
+# Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# serial 8
+
+# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery.  Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+AC_PREREQ([2.54])
+
+# Autoconf 2.50 wants to disallow AM_ names.  We explicitly allow
+# the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+
+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+# AM_INIT_AUTOMAKE([OPTIONS])
+# -----------------------------------------------
+# The call with PACKAGE and VERSION arguments is the old style
+# call (pre autoconf-2.50), which is being phased out.  PACKAGE
+# and VERSION should now be passed to AC_INIT and removed from
+# the call to AM_INIT_AUTOMAKE.
+# We support both call styles for the transition.  After
+# the next Automake release, Autoconf can make the AC_INIT
+# arguments mandatory, and then we can depend on a new Autoconf
+# release and drop the old call support.
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+ AC_REQUIRE([AC_PROG_INSTALL])dnl
+# test to see if srcdir already configured
+if test "`cd $srcdir && pwd`" != "`pwd`" &&
+   test -f $srcdir/config.status; then
+  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+  if (cygpath --version) >/dev/null 2>/dev/null; then
+    CYGPATH_W='cygpath -w'
+  else
+    CYGPATH_W=echo
+  fi
+fi
+AC_SUBST([CYGPATH_W])
+
+# Define the identity of the package.
+dnl Distinguish between old-style and new-style calls.
+m4_ifval([$2],
+[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+ AC_SUBST([PACKAGE], [$1])dnl
+ AC_SUBST([VERSION], [$2])],
+[_AM_SET_OPTIONS([$1])dnl
+ AC_SUBST([PACKAGE], [AC_PACKAGE_TARNAME])dnl
+ AC_SUBST([VERSION], [AC_PACKAGE_VERSION])])dnl
+
+_AM_IF_OPTION([no-define],,
+[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
+AM_MISSING_PROG(AUTOCONF, autoconf)
+AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
+AM_MISSING_PROG(AUTOHEADER, autoheader)
+AM_MISSING_PROG(MAKEINFO, makeinfo)
+AM_MISSING_PROG(AMTAR, tar)
+AM_PROG_INSTALL_SH
+AM_PROG_INSTALL_STRIP
+# We need awk for the "check" target.  The system "awk" is bad on
+# some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+
+_AM_IF_OPTION([no-dependencies],,
+[AC_PROVIDE_IFELSE([AC_PROG_CC],
+                  [_AM_DEPENDENCIES(CC)],
+                  [define([AC_PROG_CC],
+                          defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_CXX],
+                  [_AM_DEPENDENCIES(CXX)],
+                  [define([AC_PROG_CXX],
+                          defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+])
+])
+
+
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated.  The stamp files are numbered to have different names.
+
+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+# loop where config.status creates the headers, so we can generate
+# our stamp files there.
+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+[_am_stamp_count=`expr ${_am_stamp_count-0} + 1`
+echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
+
+# Copyright 2002  Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+AC_DEFUN([AM_AUTOMAKE_VERSION],[am__api_version="1.7"])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION so it can be traced.
+# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+	 [AM_AUTOMAKE_VERSION([1.7.2])])
+
+# Helper functions for option handling.                    -*- Autoconf -*-
+
+# Copyright 2001, 2002  Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# serial 2
+
+# _AM_MANGLE_OPTION(NAME)
+# -----------------------
+AC_DEFUN([_AM_MANGLE_OPTION],
+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+
+# _AM_SET_OPTION(NAME)
+# ------------------------------
+# Set option NAME.  Presently that only means defining a flag for this option.
+AC_DEFUN([_AM_SET_OPTION],
+[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
+
+# _AM_SET_OPTIONS(OPTIONS)
+# ----------------------------------
+# OPTIONS is a space-separated list of Automake options.
+AC_DEFUN([_AM_SET_OPTIONS],
+[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+
+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+# -------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+AC_DEFUN([_AM_IF_OPTION],
+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+#
+# Check to make sure that the build environment is sane.
+#
+
+# Copyright 1996, 1997, 2000, 2001 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# serial 3
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+   if test "$[*]" = "X"; then
+      # -L didn't work.
+      set X `ls -t $srcdir/configure conftest.file`
+   fi
+   rm -f conftest.file
+   if test "$[*]" != "X $srcdir/configure conftest.file" \
+      && test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+      # If neither matched, then we have a broken ls.  This can happen
+      # if, for instance, CONFIG_SHELL is bash and it inherits a
+      # broken ls alias from the environment.  This has actually
+      # happened.  Such a system could not be considered "sane".
+      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
+alias in your environment])
+   fi
+
+   test "$[2]" = conftest.file
+   )
+then
+   # Ok.
+   :
+else
+   AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+AC_MSG_RESULT(yes)])
+
+#  -*- Autoconf -*-
+
+
+# Copyright 1997, 1999, 2000, 2001 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# serial 3
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it supports --run.
+# If it does, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+  am_missing_run="$MISSING --run "
+else
+  am_missing_run=
+  AC_MSG_WARN([`missing' script is too old or missing])
+fi
+])
+
+# AM_AUX_DIR_EXPAND
+
+# Copyright 2001 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to `$srcdir/foo'.  In other projects, it is set to
+# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory.  The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run.  This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+#    fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+#    fails if $ac_aux_dir is absolute,
+#    fails when called from a subdirectory in a VPATH build with
+#          a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir.  In an in-source build this is usually
+# harmless because $srcdir is `.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
+#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+#   MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH.  The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+# Rely on autoconf to set up CDPATH properly.
+AC_PREREQ([2.50])
+
+AC_DEFUN([AM_AUX_DIR_EXPAND], [
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+])
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+
+# Copyright 2001 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+install_sh=${install_sh-"$am_aux_dir/install-sh"}
+AC_SUBST(install_sh)])
+
+# AM_PROG_INSTALL_STRIP
+
+# Copyright 2001 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# One issue with vendor `install' (even GNU) is that you can't
+# specify the program used to strip binaries.  This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in `make install-strip', and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'.  However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
+if test "$cross_compiling" != no; then
+  AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+# serial 4						-*- Autoconf -*-
+
+# Copyright 1999, 2000, 2001 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+
+# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery.  Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+
+# _AM_DEPENDENCIES(NAME)
+# ----------------------
+# See how the compiler implements dependency checking.
+# NAME is "CC", "CXX", "GCJ", or "OBJC".
+# We try a few techniques and use that to set a single cache variable.
+#
+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+# dependency, and given that the user is not expected to run this macro,
+# just rely on AC_PROG_CC.
+AC_DEFUN([_AM_DEPENDENCIES],
+[AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+
+ifelse([$1], CC,   [depcc="$CC"   am_compiler_list=],
+       [$1], CXX,  [depcc="$CXX"  am_compiler_list=],
+       [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+       [$1], GCJ,  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
+                   [depcc="$$1"   am_compiler_list=])
+
+AC_CACHE_CHECK([dependency style of $depcc],
+               [am_cv_$1_dependencies_compiler_type],
+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named `D' -- because `-MD' means `put the output
+  # in D'.
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+
+  am_cv_$1_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+  fi
+  for depmode in $am_compiler_list; do
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    echo '#include "conftest.h"' > conftest.c
+    echo 'int i;' > conftest.h
+    echo "${am__include} ${am__quote}conftest.Po${am__quote}" > confmf
+
+    case $depmode in
+    nosideeffect)
+      # after this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    none) break ;;
+    esac
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.
+    if depmode=$depmode \
+       source=conftest.c object=conftest.o \
+       depfile=conftest.Po tmpdepfile=conftest.TPo \
+       $SHELL ./depcomp $depcc -c -o conftest.o conftest.c >/dev/null 2>&1 &&
+       grep conftest.h conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      am_cv_$1_dependencies_compiler_type=$depmode
+      break
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_$1_dependencies_compiler_type=none
+fi
+])
+AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
+AM_CONDITIONAL([am__fastdep$1], [
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
+])
+
+
+# AM_SET_DEPDIR
+# -------------
+# Choose a directory name for dependency files.
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES
+AC_DEFUN([AM_SET_DEPDIR],
+[rm -f .deps 2>/dev/null
+mkdir .deps 2>/dev/null
+if test -d .deps; then
+  DEPDIR=.deps
+else
+  # MS-DOS does not allow filenames that begin with a dot.
+  DEPDIR=_deps
+fi
+rmdir .deps 2>/dev/null
+AC_SUBST([DEPDIR])
+])
+
+
+# AM_DEP_TRACK
+# ------------
+AC_DEFUN([AM_DEP_TRACK],
+[AC_ARG_ENABLE(dependency-tracking,
+[  --disable-dependency-tracking Speeds up one-time builds
+  --enable-dependency-tracking  Do not reject slow dependency extractors])
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+fi
+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+AC_SUBST([AMDEPBACKSLASH])
+])
+
+# Generate code to set up dependency tracking.   -*- Autoconf -*-
+
+# Copyright 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+#serial 2
+
+# _AM_OUTPUT_DEPENDENCY_COMMANDS
+# ------------------------------
+AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
+[for mf in $CONFIG_FILES; do
+  # Strip MF so we end up with the name of the file.
+  mf=`echo "$mf" | sed -e 's/:.*$//'`
+  # Check whether this is an Automake generated Makefile or not.
+  # We used to match only the files named `Makefile.in', but
+  # some people rename them; so instead we look at the file content.
+  # Grep'ing the first line is not enough: some people post-process
+  # each Makefile.in and add a new line on top of each file to say so.
+  # So let's grep whole file.
+  if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
+    dirpart=`AS_DIRNAME("$mf")`
+  else
+    continue
+  fi
+  grep '^DEP_FILES *= *[[^ @%:@]]' < "$mf" > /dev/null || continue
+  # Extract the definition of DEP_FILES from the Makefile without
+  # running `make'.
+  DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"`
+  test -z "$DEPDIR" && continue
+  # When using ansi2knr, U may be empty or an underscore; expand it
+  U=`sed -n -e '/^U = / s///p' < "$mf"`
+  test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR"
+  # We invoke sed twice because it is the simplest approach to
+  # changing $(DEPDIR) to its actual value in the expansion.
+  for file in `sed -n -e '
+    /^DEP_FILES = .*\\\\$/ {
+      s/^DEP_FILES = //
+      :loop
+	s/\\\\$//
+	p
+	n
+	/\\\\$/ b loop
+      p
+    }
+    /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \
+       sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+    # Make sure the directory exists.
+    test -f "$dirpart/$file" && continue
+    fdir=`AS_DIRNAME(["$file"])`
+    AS_MKDIR_P([$dirpart/$fdir])
+    # echo "creating $dirpart/$file"
+    echo '# dummy' > "$dirpart/$file"
+  done
+done
+])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+
+
+# AM_OUTPUT_DEPENDENCY_COMMANDS
+# -----------------------------
+# This macro should only be invoked once -- use via AC_REQUIRE.
+#
+# This code is only required when automatic dependency tracking
+# is enabled.  FIXME.  This creates each `.P' file that we will
+# need in order to bootstrap the dependency handling code.
+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
+[AC_CONFIG_COMMANDS([depfiles],
+     [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
+     [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
+])
+
+# Check to see how 'make' treats includes.	-*- Autoconf -*-
+
+# Copyright (C) 2001, 2002 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# serial 2
+
+# AM_MAKE_INCLUDE()
+# -----------------
+# Check to see how make treats includes.
+AC_DEFUN([AM_MAKE_INCLUDE],
+[am_make=${MAKE-make}
+cat > confinc << 'END'
+doit:
+	@echo done
+END
+# If we don't find an include directive, just comment out the code.
+AC_MSG_CHECKING([for style of include used by $am_make])
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# We grep out `Entering directory' and `Leaving directory'
+# messages which can occur if `w' ends up in MAKEFLAGS.
+# In particular we don't look at `^make:' because GNU make might
+# be invoked under some other name (usually "gmake"), in which
+# case it prints its new name instead of `make'.
+if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
+   am__include=include
+   am__quote=
+   _am_result=GNU
+fi
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+   echo '.include "confinc"' > confmf
+   if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
+      am__include=.include
+      am__quote="\""
+      _am_result=BSD
+   fi
+fi
+AC_SUBST(am__include)
+AC_SUBST(am__quote)
+AC_MSG_RESULT($_am_result)
+rm -f confinc confmf
+])
+
+# AM_CONDITIONAL                                              -*- Autoconf -*-
+
+# Copyright 1997, 2000, 2001 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# serial 5
+
+AC_PREREQ(2.52)
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[ifelse([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
+        [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])
+AC_SUBST([$1_FALSE])
+if $2; then
+  $1_TRUE=
+  $1_FALSE='#'
+else
+  $1_TRUE='#'
+  $1_FALSE=
+fi
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+  AC_MSG_ERROR([conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.])
+fi])])
+
+# Like AC_CONFIG_HEADER, but automatically create stamp file. -*- Autoconf -*-
+
+# Copyright 1996, 1997, 2000, 2001 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+AC_PREREQ([2.52])
+
+# serial 6
+
+# AM_CONFIG_HEADER is obsolete.  It has been replaced by AC_CONFIG_HEADERS.
+AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)])
+
+# libtool.m4 - Configure libtool for the host system. -*-Shell-script-*-
+
+# serial 46 AC_PROG_LIBTOOL
+
+AC_DEFUN([AC_PROG_LIBTOOL],
+[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+AC_SUBST(LIBTOOL)dnl
+
+# Prevent multiple expansion
+define([AC_PROG_LIBTOOL], [])
+])
+
+AC_DEFUN([AC_LIBTOOL_SETUP],
+[AC_PREREQ(2.13)dnl
+AC_REQUIRE([AC_ENABLE_SHARED])dnl
+AC_REQUIRE([AC_ENABLE_STATIC])dnl
+AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_PROG_LD])dnl
+AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
+AC_REQUIRE([AC_PROG_NM])dnl
+AC_REQUIRE([LT_AC_PROG_SED])dnl
+
+AC_REQUIRE([AC_PROG_LN_S])dnl
+AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
+AC_REQUIRE([AC_OBJEXT])dnl
+AC_REQUIRE([AC_EXEEXT])dnl
+dnl
+
+_LT_AC_PROG_ECHO_BACKSLASH
+# Only perform the check for file, if the check method requires it
+case $deplibs_check_method in
+file_magic*)
+  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+    AC_PATH_MAGIC
+  fi
+  ;;
+esac
+
+AC_CHECK_TOOL(RANLIB, ranlib, :)
+AC_CHECK_TOOL(STRIP, strip, :)
+
+ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+enable_win32_dll=yes, enable_win32_dll=no)
+
+AC_ARG_ENABLE(libtool-lock,
+  [  --disable-libtool-lock  avoid locking (might break parallel builds)])
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+*-*-irix6*)
+  # Find out which ABI we are using.
+  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+    case `/usr/bin/file conftest.$ac_objext` in
+    *32-bit*)
+      LD="${LD-ld} -32"
+      ;;
+    *N32*)
+      LD="${LD-ld} -n32"
+      ;;
+    *64-bit*)
+      LD="${LD-ld} -64"
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+
+*-*-sco3.2v5*)
+  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+  SAVE_CFLAGS="$CFLAGS"
+  CFLAGS="$CFLAGS -belf"
+  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
+    [AC_LANG_SAVE
+     AC_LANG_C
+     AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
+     AC_LANG_RESTORE])
+  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+    CFLAGS="$SAVE_CFLAGS"
+  fi
+  ;;
+
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
+  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+  AC_CHECK_TOOL(AS, as, false)
+  AC_CHECK_TOOL(OBJDUMP, objdump, false)
+
+  # recent cygwin and mingw systems supply a stub DllMain which the user
+  # can override, but on older systems we have to supply one
+  AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain,
+    [AC_TRY_LINK([],
+      [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*);
+      DllMain (0, 0, 0);],
+      [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])])
+
+  case $host/$CC in
+  *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*)
+    # old mingw systems require "-dll" to link a DLL, while more recent ones
+    # require "-mdll"
+    SAVE_CFLAGS="$CFLAGS"
+    CFLAGS="$CFLAGS -mdll"
+    AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch,
+      [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])])
+    CFLAGS="$SAVE_CFLAGS" ;;
+  *-*-cygwin* | *-*-pw32*)
+    # cygwin systems need to pass --dll to the linker, and not link
+    # crt.o which will require a WinMain@16 definition.
+    lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;;
+  esac
+  ;;
+  ])
+esac
+
+_LT_AC_LTCONFIG_HACK
+
+])
+
+# AC_LIBTOOL_HEADER_ASSERT
+# ------------------------
+AC_DEFUN([AC_LIBTOOL_HEADER_ASSERT],
+[AC_CACHE_CHECK([whether $CC supports assert without backlinking],
+    [lt_cv_func_assert_works],
+    [case $host in
+    *-*-solaris*)
+      if test "$GCC" = yes && test "$with_gnu_ld" != yes; then
+        case `$CC --version 2>/dev/null` in
+        [[12]].*) lt_cv_func_assert_works=no ;;
+        *)        lt_cv_func_assert_works=yes ;;
+        esac
+      fi
+      ;;
+    esac])
+
+if test "x$lt_cv_func_assert_works" = xyes; then
+  AC_CHECK_HEADERS(assert.h)
+fi
+])# AC_LIBTOOL_HEADER_ASSERT
+
+# _LT_AC_CHECK_DLFCN
+# --------------------
+AC_DEFUN([_LT_AC_CHECK_DLFCN],
+[AC_CHECK_HEADERS(dlfcn.h)
+])# _LT_AC_CHECK_DLFCN
+
+# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
+# ---------------------------------
+AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE],
+[AC_REQUIRE([AC_CANONICAL_HOST])
+AC_REQUIRE([AC_PROG_NM])
+AC_REQUIRE([AC_OBJEXT])
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+AC_MSG_CHECKING([command to parse $NM output])
+AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], [dnl
+
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[[BCDEGRST]]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
+
+# Transform the above into a raw symbol and a C symbol.
+symxfrm='\1 \2\3 \3'
+
+# Transform an extracted symbol line into a proper C declaration
+lt_cv_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+  symcode='[[BCDT]]'
+  ;;
+cygwin* | mingw* | pw32*)
+  symcode='[[ABCDGISTW]]'
+  ;;
+hpux*) # Its linker distinguishes data from code symbols
+  lt_cv_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+  lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
+  ;;
+irix* | nonstopux*)
+  symcode='[[BCDEGRST]]'
+  ;;
+osf*)
+  symcode='[[BCDEGQRST]]'
+  ;;
+solaris* | sysv5*)
+  symcode='[[BDT]]'
+  ;;
+sysv4)
+  symcode='[[DFNSTU]]'
+  ;;
+esac
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $host_os in
+mingw*)
+  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+  ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
+  symcode='[[ABCDGISTW]]'
+fi
+
+# Try without a prefix undercore, then with it.
+for ac_symprfx in "" "_"; do
+
+  # Write the raw and C identifiers.
+lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ 	]]\($symcode$symcode*\)[[ 	]][[ 	]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"
+
+  # Check to see that the pipe works correctly.
+  pipe_works=no
+  rm -f conftest*
+  cat > conftest.$ac_ext <<EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+EOF
+
+  if AC_TRY_EVAL(ac_compile); then
+    # Now try to grab the symbols.
+    nlist=conftest.nm
+    if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
+      # Try sorting and uniquifying the output.
+      if sort "$nlist" | uniq > "$nlist"T; then
+	mv -f "$nlist"T "$nlist"
+      else
+	rm -f "$nlist"T
+      fi
+
+      # Make sure that we snagged all the symbols we need.
+      if egrep ' nm_test_var$' "$nlist" >/dev/null; then
+	if egrep ' nm_test_func$' "$nlist" >/dev/null; then
+	  cat <<EOF > conftest.$ac_ext
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+EOF
+	  # Now generate the symbol file.
+	  eval "$lt_cv_global_symbol_to_cdecl"' < "$nlist" >> conftest.$ac_ext'
+
+	  cat <<EOF >> conftest.$ac_ext
+#if defined (__STDC__) && __STDC__
+# define lt_ptr void *
+#else
+# define lt_ptr char *
+# define const
+#endif
+
+/* The mapping between symbol names and symbols. */
+const struct {
+  const char *name;
+  lt_ptr address;
+}
+lt_preloaded_symbols[[]] =
+{
+EOF
+	  sed "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (lt_ptr) \&\2},/" < "$nlist" >> conftest.$ac_ext
+	  cat <<\EOF >> conftest.$ac_ext
+  {0, (lt_ptr) 0}
+};
+
+#ifdef __cplusplus
+}
+#endif
+EOF
+	  # Now try linking the two files.
+	  mv conftest.$ac_objext conftstm.$ac_objext
+	  save_LIBS="$LIBS"
+	  save_CFLAGS="$CFLAGS"
+	  LIBS="conftstm.$ac_objext"
+	  CFLAGS="$CFLAGS$no_builtin_flag"
+	  if AC_TRY_EVAL(ac_link) && test -s conftest$ac_exeext; then
+	    pipe_works=yes
+	  fi
+	  LIBS="$save_LIBS"
+	  CFLAGS="$save_CFLAGS"
+	else
+	  echo "cannot find nm_test_func in $nlist" >&AC_FD_CC
+	fi
+      else
+	echo "cannot find nm_test_var in $nlist" >&AC_FD_CC
+      fi
+    else
+      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AC_FD_CC
+    fi
+  else
+    echo "$progname: failed program was:" >&AC_FD_CC
+    cat conftest.$ac_ext >&5
+  fi
+  rm -f conftest* conftst*
+
+  # Do not use the global_symbol_pipe unless it works.
+  if test "$pipe_works" = yes; then
+    break
+  else
+    lt_cv_sys_global_symbol_pipe=
+  fi
+done
+])
+global_symbol_pipe="$lt_cv_sys_global_symbol_pipe"
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+  global_symbol_to_cdecl=
+  global_symbol_to_c_name_address=
+else
+  global_symbol_to_cdecl="$lt_cv_global_symbol_to_cdecl"
+  global_symbol_to_c_name_address="$lt_cv_global_symbol_to_c_name_address"
+fi
+if test -z "$global_symbol_pipe$global_symbol_to_cdec$global_symbol_to_c_name_address";
+then
+  AC_MSG_RESULT(failed)
+else
+  AC_MSG_RESULT(ok)
+fi
+]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
+
+# _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR
+# ---------------------------------
+AC_DEFUN([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR],
+[# Find the correct PATH separator.  Usually this is `:', but
+# DJGPP uses `;' like DOS.
+if test "X${PATH_SEPARATOR+set}" != Xset; then
+  UNAME=${UNAME-`uname 2>/dev/null`}
+  case X$UNAME in
+    *-DOS) lt_cv_sys_path_separator=';' ;;
+    *)     lt_cv_sys_path_separator=':' ;;
+  esac
+  PATH_SEPARATOR=$lt_cv_sys_path_separator
+fi
+])# _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR
+
+# _LT_AC_PROG_ECHO_BACKSLASH
+# --------------------------
+# Add some code to the start of the generated configure script which
+# will find an echo command which doesn't interpret backslashes.
+AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],
+[ifdef([AC_DIVERSION_NOTICE], [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
+			      [AC_DIVERT_PUSH(NOTICE)])
+_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR
+
+# Check that we are running under the correct shell.
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+case X$ECHO in
+X*--fallback-echo)
+  # Remove one level of quotation (which was required for Make).
+  ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
+  ;;
+esac
+
+echo=${ECHO-echo}
+if test "X[$]1" = X--no-reexec; then
+  # Discard the --no-reexec flag, and continue.
+  shift
+elif test "X[$]1" = X--fallback-echo; then
+  # Avoid inline document here, it may be left over
+  :
+elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
+  # Yippee, $echo works!
+  :
+else
+  # Restart under the correct shell.
+  exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
+fi
+
+if test "X[$]1" = X--fallback-echo; then
+  # used as fallback echo
+  shift
+  cat <<EOF
+$*
+EOF
+  exit 0
+fi
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
+
+if test -z "$ECHO"; then
+if test "X${echo_test_string+set}" != Xset; then
+# find a string as large as possible, as long as the shell can cope with it
+  for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
+    # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+    if (echo_test_string="`eval $cmd`") 2>/dev/null &&
+       echo_test_string="`eval $cmd`" &&
+       (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
+    then
+      break
+    fi
+  done
+fi
+
+if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
+   echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
+   test "X$echo_testing_string" = "X$echo_test_string"; then
+  :
+else
+  # The Solaris, AIX, and Digital Unix default echo programs unquote
+  # backslashes.  This makes it impossible to quote backslashes using
+  #   echo "$something" | sed 's/\\/\\\\/g'
+  #
+  # So, first we look for a working echo in the user's PATH.
+
+  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for dir in $PATH /usr/ucb; do
+    if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+       test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+       echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
+       test "X$echo_testing_string" = "X$echo_test_string"; then
+      echo="$dir/echo"
+      break
+    fi
+  done
+  IFS="$save_ifs"
+
+  if test "X$echo" = Xecho; then
+    # We didn't find a better echo, so look for alternatives.
+    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
+       echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
+       test "X$echo_testing_string" = "X$echo_test_string"; then
+      # This shell has a builtin print -r that does the trick.
+      echo='print -r'
+    elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
+	 test "X$CONFIG_SHELL" != X/bin/ksh; then
+      # If we have ksh, try running configure again with it.
+      ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+      export ORIGINAL_CONFIG_SHELL
+      CONFIG_SHELL=/bin/ksh
+      export CONFIG_SHELL
+      exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
+    else
+      # Try using printf.
+      echo='printf %s\n'
+      if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
+	 echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
+	 test "X$echo_testing_string" = "X$echo_test_string"; then
+	# Cool, printf works
+	:
+      elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+	   test "X$echo_testing_string" = 'X\t' &&
+	   echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+	   test "X$echo_testing_string" = "X$echo_test_string"; then
+	CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
+	export CONFIG_SHELL
+	SHELL="$CONFIG_SHELL"
+	export SHELL
+	echo="$CONFIG_SHELL [$]0 --fallback-echo"
+      elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+	   test "X$echo_testing_string" = 'X\t' &&
+	   echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+	   test "X$echo_testing_string" = "X$echo_test_string"; then
+	echo="$CONFIG_SHELL [$]0 --fallback-echo"
+      else
+	# maybe with a smaller string...
+	prev=:
+
+	for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
+	  if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
+	  then
+	    break
+	  fi
+	  prev="$cmd"
+	done
+
+	if test "$prev" != 'sed 50q "[$]0"'; then
+	  echo_test_string=`eval $prev`
+	  export echo_test_string
+	  exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
+	else
+	  # Oops.  We lost completely, so just stick with echo.
+	  echo=echo
+	fi
+      fi
+    fi
+  fi
+fi
+fi
+
+# Copy echo and quote the copy suitably for passing to libtool from
+# the Makefile, instead of quoting the original, which is used later.
+ECHO=$echo
+if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
+   ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
+fi
+
+AC_SUBST(ECHO)
+AC_DIVERT_POP
+])# _LT_AC_PROG_ECHO_BACKSLASH
+
+# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
+#                           ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
+# ------------------------------------------------------------------
+AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
+[if test "$cross_compiling" = yes; then :
+  [$4]
+else
+  AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<EOF
+[#line __oline__ "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+#ifdef __cplusplus
+extern "C" void exit (int);
+#endif
+
+void fnord() { int i=42;}
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+      /* dlclose (self); */
+    }
+
+    exit (status);
+}]
+EOF
+  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
+    (./conftest; exit; ) 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) $1 ;;
+      x$lt_dlneed_uscore) $2 ;;
+      x$lt_unknown|x*) $3 ;;
+    esac
+  else :
+    # compilation failed
+    $3
+  fi
+fi
+rm -fr conftest*
+])# _LT_AC_TRY_DLOPEN_SELF
+
+# AC_LIBTOOL_DLOPEN_SELF
+# -------------------
+AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
+[if test "x$enable_dlopen" != xyes; then
+  enable_dlopen=unknown
+  enable_dlopen_self=unknown
+  enable_dlopen_self_static=unknown
+else
+  lt_cv_dlopen=no
+  lt_cv_dlopen_libs=
+
+  case $host_os in
+  beos*)
+    lt_cv_dlopen="load_add_on"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+    ;;
+
+  cygwin* | mingw* | pw32*)
+    lt_cv_dlopen="LoadLibrary"
+    lt_cv_dlopen_libs=
+   ;;
+
+  *)
+    AC_CHECK_FUNC([shl_load],
+          [lt_cv_dlopen="shl_load"],
+      [AC_CHECK_LIB([dld], [shl_load],
+            [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"],
+	[AC_CHECK_FUNC([dlopen],
+	      [lt_cv_dlopen="dlopen"],
+	  [AC_CHECK_LIB([dl], [dlopen],
+	        [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
+	    [AC_CHECK_LIB([svld], [dlopen],
+	          [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
+	      [AC_CHECK_LIB([dld], [dld_link],
+	            [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
+	      ])
+	    ])
+	  ])
+	])
+      ])
+    ;;
+  esac
+
+  if test "x$lt_cv_dlopen" != xno; then
+    enable_dlopen=yes
+  else
+    enable_dlopen=no
+  fi
+
+  case $lt_cv_dlopen in
+  dlopen)
+    save_CPPFLAGS="$CPPFLAGS"
+    AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
+    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+    save_LDFLAGS="$LDFLAGS"
+    eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+    save_LIBS="$LIBS"
+    LIBS="$lt_cv_dlopen_libs $LIBS"
+
+    AC_CACHE_CHECK([whether a program can dlopen itself],
+	  lt_cv_dlopen_self, [dnl
+	  _LT_AC_TRY_DLOPEN_SELF(
+	    lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
+	    lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
+    ])
+
+    if test "x$lt_cv_dlopen_self" = xyes; then
+      LDFLAGS="$LDFLAGS $link_static_flag"
+      AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
+    	  lt_cv_dlopen_self_static, [dnl
+	  _LT_AC_TRY_DLOPEN_SELF(
+	    lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
+	    lt_cv_dlopen_self_static=no,  lt_cv_dlopen_self_static=cross)
+      ])
+    fi
+
+    CPPFLAGS="$save_CPPFLAGS"
+    LDFLAGS="$save_LDFLAGS"
+    LIBS="$save_LIBS"
+    ;;
+  esac
+
+  case $lt_cv_dlopen_self in
+  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+  *) enable_dlopen_self=unknown ;;
+  esac
+
+  case $lt_cv_dlopen_self_static in
+  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+  *) enable_dlopen_self_static=unknown ;;
+  esac
+fi
+])# AC_LIBTOOL_DLOPEN_SELF
+
+AC_DEFUN([_LT_AC_LTCONFIG_HACK],
+[AC_REQUIRE([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])dnl
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='sed -e s/^X//'
+sed_quote_subst='s/\([[\\"\\`$\\\\]]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\([[\\"\\`\\\\]]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Constants:
+rm="rm -f"
+
+# Global variables:
+default_ofile=libtool
+can_build_shared=yes
+
+# All known linkers require a `.a' archive for static linking (except M$VC,
+# which needs '.lib').
+libext=a
+ltmain="$ac_aux_dir/ltmain.sh"
+ofile="$default_ofile"
+with_gnu_ld="$lt_cv_prog_gnu_ld"
+need_locks="$enable_libtool_lock"
+
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
+
+# Set sane defaults for various variables
+test -z "$AR" && AR=ar
+test -z "$AR_FLAGS" && AR_FLAGS=cru
+test -z "$AS" && AS=as
+test -z "$CC" && CC=cc
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+test -z "$LD" && LD=ld
+test -z "$LN_S" && LN_S="ln -s"
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+test -z "$NM" && NM=nm
+test -z "$OBJDUMP" && OBJDUMP=objdump
+test -z "$RANLIB" && RANLIB=:
+test -z "$STRIP" && STRIP=:
+test -z "$ac_objext" && ac_objext=o
+
+if test x"$host" != x"$build"; then
+  ac_tool_prefix=${host_alias}-
+else
+  ac_tool_prefix=
+fi
+
+# Transform linux* to *-*-linux-gnu*, to support old configure scripts.
+case $host_os in
+linux-gnu*) ;;
+linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'`
+esac
+
+case $host_os in
+aix3*)
+  # AIX sometimes has problems with the GCC collect2 program.  For some
+  # reason, if we set the COLLECT_NAMES environment variable, the problems
+  # vanish in a puff of smoke.
+  if test "X${COLLECT_NAMES+set}" != Xset; then
+    COLLECT_NAMES=
+    export COLLECT_NAMES
+  fi
+  ;;
+esac
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+  case $host_os in
+  openbsd*)
+    old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds"
+    ;;
+  *)
+    old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
+    ;;
+  esac
+  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+fi
+
+# Allow CC to be a program name with arguments.
+set dummy $CC
+compiler="[$]2"
+
+AC_MSG_CHECKING([for objdir])
+rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+  objdir=.libs
+else
+  # MS-DOS does not allow filenames that begin with a dot.
+  objdir=_libs
+fi
+rmdir .libs 2>/dev/null
+AC_MSG_RESULT($objdir)
+
+
+AC_ARG_WITH(pic,
+[  --with-pic              try to use only PIC/non-PIC objects [default=use both]],
+pic_mode="$withval", pic_mode=default)
+test -z "$pic_mode" && pic_mode=default
+
+# We assume here that the value for lt_cv_prog_cc_pic will not be cached
+# in isolation, and that seeing it set (from the cache) indicates that
+# the associated values are set (in the cache) correctly too.
+AC_MSG_CHECKING([for $compiler option to produce PIC])
+AC_CACHE_VAL(lt_cv_prog_cc_pic,
+[ lt_cv_prog_cc_pic=
+  lt_cv_prog_cc_shlib=
+  lt_cv_prog_cc_wl=
+  lt_cv_prog_cc_static=
+  lt_cv_prog_cc_no_builtin=
+  lt_cv_prog_cc_can_build_shared=$can_build_shared
+
+  if test "$GCC" = yes; then
+    lt_cv_prog_cc_wl='-Wl,'
+    lt_cv_prog_cc_static='-static'
+
+    case $host_os in
+    aix*)
+      # Below there is a dirty hack to force normal static linking with -ldl
+      # The problem is because libdl dynamically linked with both libc and
+      # libC (AIX C++ library), which obviously doesn't included in libraries
+      # list by gcc. This cause undefined symbols with -static flags.
+      # This hack allows C programs to be linked with "-static -ldl", but
+      # not sure about C++ programs.
+      lt_cv_prog_cc_static="$lt_cv_prog_cc_static ${lt_cv_prog_cc_wl}-lC"
+      ;;
+    amigaos*)
+      # FIXME: we need at least 68020 code to build shared libraries, but
+      # adding the `-m68020' flag to GCC prevents building anything better,
+      # like `-m68040'.
+      lt_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4'
+      ;;
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      lt_cv_prog_cc_pic='-fno-common'
+      ;;
+    cygwin* | mingw* | pw32* | os2*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      lt_cv_prog_cc_pic='-DDLL_EXPORT'
+      ;;
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	 lt_cv_prog_cc_pic=-Kconform_pic
+      fi
+      ;;
+    *)
+      lt_cv_prog_cc_pic='-fPIC'
+      ;;
+    esac
+  else
+    # PORTME Check for PIC flags for the system compiler.
+    case $host_os in
+    aix3* | aix4* | aix5*)
+      lt_cv_prog_cc_wl='-Wl,'
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_cv_prog_cc_static='-Bstatic'
+      else
+	lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp'
+      fi
+      ;;
+
+    hpux9* | hpux10* | hpux11*)
+      # Is there a better lt_cv_prog_cc_static that works with the bundled CC?
+      lt_cv_prog_cc_wl='-Wl,'
+      lt_cv_prog_cc_static="${lt_cv_prog_cc_wl}-a ${lt_cv_prog_cc_wl}archive"
+      lt_cv_prog_cc_pic='+Z'
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      lt_cv_prog_cc_wl='-Wl,'
+      lt_cv_prog_cc_static='-non_shared'
+      # PIC (with -KPIC) is the default.
+      ;;
+
+    cygwin* | mingw* | pw32* | os2*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      lt_cv_prog_cc_pic='-DDLL_EXPORT'
+      ;;
+
+    newsos6)
+      lt_cv_prog_cc_pic='-KPIC'
+      lt_cv_prog_cc_static='-Bstatic'
+      ;;
+
+    osf3* | osf4* | osf5*)
+      # All OSF/1 code is PIC.
+      lt_cv_prog_cc_wl='-Wl,'
+      lt_cv_prog_cc_static='-non_shared'
+      ;;
+
+    sco3.2v5*)
+      lt_cv_prog_cc_pic='-Kpic'
+      lt_cv_prog_cc_static='-dn'
+      lt_cv_prog_cc_shlib='-belf'
+      ;;
+
+    solaris*)
+      lt_cv_prog_cc_pic='-KPIC'
+      lt_cv_prog_cc_static='-Bstatic'
+      lt_cv_prog_cc_wl='-Wl,'
+      ;;
+
+    sunos4*)
+      lt_cv_prog_cc_pic='-PIC'
+      lt_cv_prog_cc_static='-Bstatic'
+      lt_cv_prog_cc_wl='-Qoption ld '
+      ;;
+
+    sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+      lt_cv_prog_cc_pic='-KPIC'
+      lt_cv_prog_cc_static='-Bstatic'
+      lt_cv_prog_cc_wl='-Wl,'
+      ;;
+
+    uts4*)
+      lt_cv_prog_cc_pic='-pic'
+      lt_cv_prog_cc_static='-Bstatic'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec ;then
+	lt_cv_prog_cc_pic='-Kconform_pic'
+	lt_cv_prog_cc_static='-Bstatic'
+      fi
+      ;;
+
+    *)
+      lt_cv_prog_cc_can_build_shared=no
+      ;;
+    esac
+  fi
+])
+if test -z "$lt_cv_prog_cc_pic"; then
+  AC_MSG_RESULT([none])
+else
+  AC_MSG_RESULT([$lt_cv_prog_cc_pic])
+
+  # Check to make sure the pic_flag actually works.
+  AC_MSG_CHECKING([if $compiler PIC flag $lt_cv_prog_cc_pic works])
+  AC_CACHE_VAL(lt_cv_prog_cc_pic_works, [dnl
+    save_CFLAGS="$CFLAGS"
+    CFLAGS="$CFLAGS $lt_cv_prog_cc_pic -DPIC"
+    AC_TRY_COMPILE([], [], [dnl
+      case $host_os in
+      hpux9* | hpux10* | hpux11*)
+	# On HP-UX, both CC and GCC only warn that PIC is supported... then
+	# they create non-PIC objects.  So, if there were any warnings, we
+	# assume that PIC is not supported.
+	if test -s conftest.err; then
+	  lt_cv_prog_cc_pic_works=no
+	else
+	  lt_cv_prog_cc_pic_works=yes
+	fi
+	;;
+      *)
+	lt_cv_prog_cc_pic_works=yes
+	;;
+      esac
+    ], [dnl
+      lt_cv_prog_cc_pic_works=no
+    ])
+    CFLAGS="$save_CFLAGS"
+  ])
+
+  if test "X$lt_cv_prog_cc_pic_works" = Xno; then
+    lt_cv_prog_cc_pic=
+    lt_cv_prog_cc_can_build_shared=no
+  else
+    lt_cv_prog_cc_pic=" $lt_cv_prog_cc_pic"
+  fi
+
+  AC_MSG_RESULT([$lt_cv_prog_cc_pic_works])
+fi
+
+# Check for any special shared library compilation flags.
+if test -n "$lt_cv_prog_cc_shlib"; then
+  AC_MSG_WARN([\`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries])
+  if echo "$old_CC $old_CFLAGS " | egrep -e "[[ 	]]$lt_cv_prog_cc_shlib[[ 	]]" >/dev/null; then :
+  else
+   AC_MSG_WARN([add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure])
+    lt_cv_prog_cc_can_build_shared=no
+  fi
+fi
+
+AC_MSG_CHECKING([if $compiler static flag $lt_cv_prog_cc_static works])
+AC_CACHE_VAL([lt_cv_prog_cc_static_works], [dnl
+  lt_cv_prog_cc_static_works=no
+  save_LDFLAGS="$LDFLAGS"
+  LDFLAGS="$LDFLAGS $lt_cv_prog_cc_static"
+  AC_TRY_LINK([], [], [lt_cv_prog_cc_static_works=yes])
+  LDFLAGS="$save_LDFLAGS"
+])
+
+# Belt *and* braces to stop my trousers falling down:
+test "X$lt_cv_prog_cc_static_works" = Xno && lt_cv_prog_cc_static=
+AC_MSG_RESULT([$lt_cv_prog_cc_static_works])
+
+pic_flag="$lt_cv_prog_cc_pic"
+special_shlib_compile_flags="$lt_cv_prog_cc_shlib"
+wl="$lt_cv_prog_cc_wl"
+link_static_flag="$lt_cv_prog_cc_static"
+no_builtin_flag="$lt_cv_prog_cc_no_builtin"
+can_build_shared="$lt_cv_prog_cc_can_build_shared"
+
+
+# Check to see if options -o and -c are simultaneously supported by compiler
+AC_MSG_CHECKING([if $compiler supports -c -o file.$ac_objext])
+AC_CACHE_VAL([lt_cv_compiler_c_o], [
+$rm -r conftest 2>/dev/null
+mkdir conftest
+cd conftest
+echo "int some_variable = 0;" > conftest.$ac_ext
+mkdir out
+# According to Tom Tromey, Ian Lance Taylor reported there are C compilers
+# that will create temporary files in the current directory regardless of
+# the output directory.  Thus, making CWD read-only will cause this test
+# to fail, enabling locking or at least warning the user not to do parallel
+# builds.
+chmod -w .
+save_CFLAGS="$CFLAGS"
+CFLAGS="$CFLAGS -o out/conftest2.$ac_objext"
+compiler_c_o=no
+if { (eval echo configure:__oline__: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then
+  # The compiler can only warn and ignore the option if not recognized
+  # So say no if there are warnings
+  if test -s out/conftest.err; then
+    lt_cv_compiler_c_o=no
+  else
+    lt_cv_compiler_c_o=yes
+  fi
+else
+  # Append any errors to the config.log.
+  cat out/conftest.err 1>&AC_FD_CC
+  lt_cv_compiler_c_o=no
+fi
+CFLAGS="$save_CFLAGS"
+chmod u+w .
+$rm conftest* out/*
+rmdir out
+cd ..
+rmdir conftest
+$rm -r conftest 2>/dev/null
+])
+compiler_c_o=$lt_cv_compiler_c_o
+AC_MSG_RESULT([$compiler_c_o])
+
+if test x"$compiler_c_o" = x"yes"; then
+  # Check to see if we can write to a .lo
+  AC_MSG_CHECKING([if $compiler supports -c -o file.lo])
+  AC_CACHE_VAL([lt_cv_compiler_o_lo], [
+  lt_cv_compiler_o_lo=no
+  save_CFLAGS="$CFLAGS"
+  CFLAGS="$CFLAGS -c -o conftest.lo"
+  save_objext="$ac_objext"
+  ac_objext=lo
+  AC_TRY_COMPILE([], [int some_variable = 0;], [dnl
+    # The compiler can only warn and ignore the option if not recognized
+    # So say no if there are warnings
+    if test -s conftest.err; then
+      lt_cv_compiler_o_lo=no
+    else
+      lt_cv_compiler_o_lo=yes
+    fi
+  ])
+  ac_objext="$save_objext"
+  CFLAGS="$save_CFLAGS"
+  ])
+  compiler_o_lo=$lt_cv_compiler_o_lo
+  AC_MSG_RESULT([$compiler_o_lo])
+else
+  compiler_o_lo=no
+fi
+
+# Check to see if we can do hard links to lock some files if needed
+hard_links="nottested"
+if test "$compiler_c_o" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  AC_MSG_CHECKING([if we can lock with hard links])
+  hard_links=yes
+  $rm conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  AC_MSG_RESULT([$hard_links])
+  if test "$hard_links" = no; then
+    AC_MSG_WARN([\`$CC' does not support \`-c -o', so \`make -j' may be unsafe])
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+
+if test "$GCC" = yes; then
+  # Check to see if options -fno-rtti -fno-exceptions are supported by compiler
+  AC_MSG_CHECKING([if $compiler supports -fno-rtti -fno-exceptions])
+  echo "int some_variable = 0;" > conftest.$ac_ext
+  save_CFLAGS="$CFLAGS"
+  CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext"
+  compiler_rtti_exceptions=no
+  AC_TRY_COMPILE([], [int some_variable = 0;], [dnl
+    # The compiler can only warn and ignore the option if not recognized
+    # So say no if there are warnings
+    if test -s conftest.err; then
+      compiler_rtti_exceptions=no
+    else
+      compiler_rtti_exceptions=yes
+    fi
+  ])
+  CFLAGS="$save_CFLAGS"
+  AC_MSG_RESULT([$compiler_rtti_exceptions])
+
+  if test "$compiler_rtti_exceptions" = "yes"; then
+    no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions'
+  else
+    no_builtin_flag=' -fno-builtin'
+  fi
+fi
+
+# See if the linker supports building shared libraries.
+AC_MSG_CHECKING([whether the linker ($LD) supports shared libraries])
+
+allow_undefined_flag=
+no_undefined_flag=
+need_lib_prefix=unknown
+need_version=unknown
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+archive_cmds=
+archive_expsym_cmds=
+old_archive_from_new_cmds=
+old_archive_from_expsyms_cmds=
+export_dynamic_flag_spec=
+whole_archive_flag_spec=
+thread_safe_flag_spec=
+hardcode_into_libs=no
+hardcode_libdir_flag_spec=
+hardcode_libdir_separator=
+hardcode_direct=no
+hardcode_minus_L=no
+hardcode_shlibpath_var=unsupported
+runpath_var=
+link_all_deplibs=unknown
+always_export_symbols=no
+export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols'
+# include_expsyms should be a list of space-separated symbols to be *always*
+# included in the symbol list
+include_expsyms=
+# exclude_expsyms can be an egrep regular expression of symbols to exclude
+# it will be wrapped by ` (' and `)$', so one must not match beginning or
+# end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+# as well as any symbol that contains `d'.
+exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
+# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+# platforms (ab)use it in PIC code, but their linkers get confused if
+# the symbol is explicitly referenced.  Since portable code cannot
+# rely on this symbol name, it's probably fine to never include it in
+# preloaded symbol tables.
+extract_expsyms_cmds=
+
+case $host_os in
+cygwin* | mingw* | pw32*)
+  # FIXME: the MSVC++ port hasn't been tested in a loooong time
+  # When not using gcc, we currently assume that we are using
+  # Microsoft Visual C++.
+  if test "$GCC" != yes; then
+    with_gnu_ld=no
+  fi
+  ;;
+openbsd*)
+  with_gnu_ld=no
+  ;;
+esac
+
+ld_shlibs=yes
+if test "$with_gnu_ld" = yes; then
+  # If archive_cmds runs LD, not CC, wlarc should be empty
+  wlarc='${wl}'
+
+  # See if GNU ld supports shared libraries.
+  case $host_os in
+  aix3* | aix4* | aix5*)
+    # On AIX, the GNU linker is very broken
+    # Note:Check GNU linker on AIX 5-IA64 when/if it becomes available.
+    ld_shlibs=no
+    cat <<EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to modify your PATH
+*** so that a non-GNU linker is found, and then restart.
+
+EOF
+    ;;
+
+  amigaos*)
+    archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+    hardcode_libdir_flag_spec='-L$libdir'
+    hardcode_minus_L=yes
+
+    # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
+    # that the semantics of dynamic libraries on AmigaOS, at least up
+    # to version 4, is to share data among multiple programs linked
+    # with the same dynamic library.  Since this doesn't match the
+    # behavior of shared libraries on other platforms, we can use
+    # them.
+    ld_shlibs=no
+    ;;
+
+  beos*)
+    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+      allow_undefined_flag=unsupported
+      # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+      # support --undefined.  This deserves some investigation.  FIXME
+      archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+    else
+      ld_shlibs=no
+    fi
+    ;;
+
+  cygwin* | mingw* | pw32*)
+    # hardcode_libdir_flag_spec is actually meaningless, as there is
+    # no search path for DLLs.
+    hardcode_libdir_flag_spec='-L$libdir'
+    allow_undefined_flag=unsupported
+    always_export_symbols=yes
+
+    extract_expsyms_cmds='test -f $output_objdir/impgen.c || \
+      sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //;s/^# *$//; p; }" -e d < $''0 > $output_objdir/impgen.c~
+      test -f $output_objdir/impgen.exe || (cd $output_objdir && \
+      if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \
+      else $CC -o impgen impgen.c ; fi)~
+      $output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def'
+
+    old_archive_from_expsyms_cmds='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib'
+
+    # cygwin and mingw dlls have different entry points and sets of symbols
+    # to exclude.
+    # FIXME: what about values for MSVC?
+    dll_entry=__cygwin_dll_entry@12
+    dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~
+    case $host_os in
+    mingw*)
+      # mingw values
+      dll_entry=_DllMainCRTStartup@12
+      dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~
+      ;;
+    esac
+
+    # mingw and cygwin differ, and it's simplest to just exclude the union
+    # of the two symbol sets.
+    dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12
+
+    # recent cygwin and mingw systems supply a stub DllMain which the user
+    # can override, but on older systems we have to supply one (in ltdll.c)
+    if test "x$lt_cv_need_dllmain" = "xyes"; then
+      ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext "
+      ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~
+	test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~'
+    else
+      ltdll_obj=
+      ltdll_cmds=
+    fi
+
+    # Extract the symbol export list from an `--export-all' def file,
+    # then regenerate the def file from the symbol export list, so that
+    # the compiled dll only exports the symbol export list.
+    # Be careful not to strip the DATA tag left be newer dlltools.
+    export_symbols_cmds="$ltdll_cmds"'
+      $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~
+      sed -e "1,/EXPORTS/d" -e "s/ @ [[0-9]]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols'
+
+    # If the export-symbols file already is a .def file (1st line
+    # is EXPORTS), use it as is.
+    # If DATA tags from a recent dlltool are present, honour them!
+    archive_expsym_cmds='if test "x`sed 1q $export_symbols`" = xEXPORTS; then
+	cp $export_symbols $output_objdir/$soname-def;
+      else
+	echo EXPORTS > $output_objdir/$soname-def;
+	_lt_hint=1;
+	cat $export_symbols | while read symbol; do
+	 set dummy \$symbol;
+	 case \[$]# in
+	   2) echo "   \[$]2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;;
+	   4) echo "   \[$]2 \[$]3 \[$]4 ; " >> $output_objdir/$soname-def; _lt_hint=`expr \$_lt_hint - 1`;;
+	   *) echo "     \[$]2 @ \$_lt_hint \[$]3 ; " >> $output_objdir/$soname-def;;
+	 esac;
+	 _lt_hint=`expr 1 + \$_lt_hint`;
+	done;
+      fi~
+      '"$ltdll_cmds"'
+      $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
+      $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~
+      $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
+      $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~
+      $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags'
+    ;;
+
+  netbsd*)
+    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+      archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+      wlarc=
+    else
+      archive_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+    fi
+    ;;
+
+  solaris* | sysv5*)
+    if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
+      ld_shlibs=no
+      cat <<EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+EOF
+    elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+    else
+      ld_shlibs=no
+    fi
+    ;;
+
+  sunos4*)
+    archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+    wlarc=
+    hardcode_direct=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  *)
+    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+    else
+      ld_shlibs=no
+    fi
+    ;;
+  esac
+
+  if test "$ld_shlibs" = yes; then
+    runpath_var=LD_RUN_PATH
+    hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
+    export_dynamic_flag_spec='${wl}--export-dynamic'
+    case $host_os in
+    cygwin* | mingw* | pw32*)
+      # dlltool doesn't understand --whole-archive et. al.
+      whole_archive_flag_spec=
+      ;;
+    *)
+      # ancient GNU ld didn't support --whole-archive et. al.
+      if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then
+	whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+      else
+	whole_archive_flag_spec=
+      fi
+      ;;
+    esac
+  fi
+else
+  # PORTME fill in a description of your system's linker (not GNU ld)
+  case $host_os in
+  aix3*)
+    allow_undefined_flag=unsupported
+    always_export_symbols=yes
+    archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+    # Note: this linker hardcodes the directories in LIBPATH if there
+    # are no directories specified by -L.
+    hardcode_minus_L=yes
+    if test "$GCC" = yes && test -z "$link_static_flag"; then
+      # Neither direct hardcoding nor static linking is supported with a
+      # broken collect2.
+      hardcode_direct=unsupported
+    fi
+    ;;
+
+  aix4* | aix5*)
+    if test "$host_cpu" = ia64; then
+      # On IA64, the linker does run time linking by default, so we don't
+      # have to do anything special.
+      aix_use_runtimelinking=no
+      exp_sym_flag='-Bexport'
+      no_entry_flag=""
+    else
+      aix_use_runtimelinking=no
+
+      # Test if we are trying to use run time linking or normal
+      # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+      # need to do runtime linking.
+      case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
+	for ld_flag in $LDFLAGS; do
+	  case $ld_flag in
+	  *-brtl*)
+	    aix_use_runtimelinking=yes
+	    break
+	  ;;
+	  esac
+	done
+      esac
+
+      exp_sym_flag='-bexport'
+      no_entry_flag='-bnoentry'
+    fi
+
+    # When large executables or shared objects are built, AIX ld can
+    # have problems creating the table of contents.  If linking a library
+    # or program results in "error TOC overflow" add -mminimal-toc to
+    # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+    # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+    hardcode_direct=yes
+    archive_cmds=''
+    hardcode_libdir_separator=':'
+    if test "$GCC" = yes; then
+      case $host_os in aix4.[[012]]|aix4.[[012]].*)
+	collect2name=`${CC} -print-prog-name=collect2`
+	if test -f "$collect2name" && \
+	  strings "$collect2name" | grep resolve_lib_name >/dev/null
+	then
+	  # We have reworked collect2
+	  hardcode_direct=yes
+	else
+	  # We have old collect2
+	  hardcode_direct=unsupported
+	  # It fails to find uninstalled libraries when the uninstalled
+	  # path is not listed in the libpath.  Setting hardcode_minus_L
+	  # to unsupported forces relinking
+	  hardcode_minus_L=yes
+	  hardcode_libdir_flag_spec='-L$libdir'
+	  hardcode_libdir_separator=
+	fi
+      esac
+
+      shared_flag='-shared'
+    else
+      # not using gcc
+      if test "$host_cpu" = ia64; then
+	shared_flag='${wl}-G'
+      else
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag='${wl}-G'
+	else
+	  shared_flag='${wl}-bM:SRE'
+	fi
+      fi
+    fi
+
+    # It seems that -bexpall can do strange things, so it is better to
+    # generate a list of symbols to export.
+    always_export_symbols=yes
+    if test "$aix_use_runtimelinking" = yes; then
+      # Warning - without using the other runtime loading flags (-brtl),
+      # -berok will link without error, but may produce a broken library.
+      allow_undefined_flag='-berok'
+      hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib'
+      archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+    else
+      if test "$host_cpu" = ia64; then
+	hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+	allow_undefined_flag="-z nodefs"
+	archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname ${wl}-h$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
+      else
+	hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib'
+	# Warning - without using the other run time loading flags,
+	# -berok will link without error, but may produce a broken library.
+	allow_undefined_flag='${wl}-berok'
+	# This is a bit strange, but is similar to how AIX traditionally builds
+	# it's shared libraries.
+	archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"' ~$AR -crlo $objdir/$libname$release.a $objdir/$soname'
+      fi
+    fi
+    ;;
+
+  amigaos*)
+    archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+    hardcode_libdir_flag_spec='-L$libdir'
+    hardcode_minus_L=yes
+    # see comment about different semantics on the GNU ld section
+    ld_shlibs=no
+    ;;
+
+  cygwin* | mingw* | pw32*)
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    # hardcode_libdir_flag_spec is actually meaningless, as there is
+    # no search path for DLLs.
+    hardcode_libdir_flag_spec=' '
+    allow_undefined_flag=unsupported
+    # Tell ltmain to make .lib files, not .a files.
+    libext=lib
+    # FIXME: Setting linknames here is a bad hack.
+    archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames='
+    # The linker will automatically build a .lib file if we build a DLL.
+    old_archive_from_new_cmds='true'
+    # FIXME: Should let the user specify the lib program.
+    old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs'
+    fix_srcfile_path='`cygpath -w "$srcfile"`'
+    ;;
+
+  darwin* | rhapsody*)
+    case "$host_os" in
+    rhapsody* | darwin1.[[012]])
+      allow_undefined_flag='-undefined suppress'
+      ;;
+    *) # Darwin 1.3 on
+      allow_undefined_flag='-flat_namespace -undefined suppress'
+      ;;
+    esac
+    # FIXME: Relying on posixy $() will cause problems for
+    #        cross-compilation, but unfortunately the echo tests do not
+    #        yet detect zsh echo's removal of \ escapes.  Also zsh mangles
+    #	     `"' quotes if we put them in here... so don't!
+    archive_cmds='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs && $CC $(test .$module = .yes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib ${lib}-master.o $deplibs$linker_flags $(test .$module != .yes && echo -install_name $rpath/$soname $verstring)'
+    # We need to add '_' to the symbols in $export_symbols first
+    #archive_expsym_cmds="$archive_cmds"' && strip -s $export_symbols'
+    hardcode_direct=yes
+    hardcode_shlibpath_var=no
+    whole_archive_flag_spec='-all_load $convenience'
+    ;;
+
+  freebsd1*)
+    ld_shlibs=no
+    ;;
+
+  # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+  # support.  Future versions do this automatically, but an explicit c++rt0.o
+  # does not break anything, and helps significantly (at the cost of a little
+  # extra space).
+  freebsd2.2*)
+    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+    hardcode_libdir_flag_spec='-R$libdir'
+    hardcode_direct=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+  freebsd2*)
+    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+    hardcode_direct=yes
+    hardcode_minus_L=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+  freebsd*)
+    archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+    hardcode_libdir_flag_spec='-R$libdir'
+    hardcode_direct=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  hpux9* | hpux10* | hpux11*)
+    case $host_os in
+    hpux9*) archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;;
+    *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ;;
+    esac
+    hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+    hardcode_libdir_separator=:
+    hardcode_direct=yes
+    hardcode_minus_L=yes # Not in the search PATH, but as the default
+			 # location of the library.
+    export_dynamic_flag_spec='${wl}-E'
+    ;;
+
+  irix5* | irix6* | nonstopux*)
+    if test "$GCC" = yes; then
+      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+    else
+      archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+      hardcode_libdir_flag_spec='-rpath $libdir'
+    fi
+    hardcode_libdir_separator=:
+    link_all_deplibs=yes
+    ;;
+
+  netbsd*)
+    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+    else
+      archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+    fi
+    hardcode_libdir_flag_spec='-R$libdir'
+    hardcode_direct=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  newsos6)
+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+    hardcode_direct=yes
+    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+    hardcode_libdir_separator=:
+    hardcode_shlibpath_var=no
+    ;;
+
+  openbsd*)
+    hardcode_direct=yes
+    hardcode_shlibpath_var=no
+    if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+      archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+      hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+      export_dynamic_flag_spec='${wl}-E'
+    else
+      case "$host_os" in
+      openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
+	archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	hardcode_libdir_flag_spec='-R$libdir'
+        ;;
+      *)
+        archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+        hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+        ;;
+      esac
+    fi
+    ;;
+
+  os2*)
+    hardcode_libdir_flag_spec='-L$libdir'
+    hardcode_minus_L=yes
+    allow_undefined_flag=unsupported
+    archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+    old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+    ;;
+
+  osf3*)
+    if test "$GCC" = yes; then
+      allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+      archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+    else
+      allow_undefined_flag=' -expect_unresolved \*'
+      archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+    fi
+    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+    hardcode_libdir_separator=:
+    ;;
+
+  osf4* | osf5*)	# as osf3* with the addition of -msym flag
+    if test "$GCC" = yes; then
+      allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+      archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+    else
+      allow_undefined_flag=' -expect_unresolved \*'
+      archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+      archive_expsym_cmds='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
+      $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
+
+      #Both c and cxx compiler support -rpath directly
+      hardcode_libdir_flag_spec='-rpath $libdir'
+    fi
+    hardcode_libdir_separator=:
+    ;;
+
+  sco3.2v5*)
+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+    hardcode_shlibpath_var=no
+    runpath_var=LD_RUN_PATH
+    hardcode_runpath_var=yes
+    export_dynamic_flag_spec='${wl}-Bexport'
+    ;;
+
+  solaris*)
+    # gcc --version < 3.0 without binutils cannot create self contained
+    # shared libraries reliably, requiring libgcc.a to resolve some of
+    # the object symbols generated in some cases.  Libraries that use
+    # assert need libgcc.a to resolve __eprintf, for example.  Linking
+    # a copy of libgcc.a into every shared library to guarantee resolving
+    # such symbols causes other problems:  According to Tim Van Holder
+    # <tim.van.holder@pandora.be>, C++ libraries end up with a separate
+    # (to the application) exception stack for one thing.
+    no_undefined_flag=' -z defs'
+    if test "$GCC" = yes; then
+      case `$CC --version 2>/dev/null` in
+      [[12]].*)
+	cat <<EOF 1>&2
+
+*** Warning: Releases of GCC earlier than version 3.0 cannot reliably
+*** create self contained shared libraries on Solaris systems, without
+*** introducing a dependency on libgcc.a.  Therefore, libtool is disabling
+*** -no-undefined support, which will at least allow you to build shared
+*** libraries.  However, you may find that when you link such libraries
+*** into an application without using GCC, you have to manually add
+*** \`gcc --print-libgcc-file-name\` to the link command.  We urge you to
+*** upgrade to a newer version of GCC.  Another option is to rebuild your
+*** current GCC to use the GNU linker from GNU binutils 2.9.1 or newer.
+
+EOF
+        no_undefined_flag=
+	;;
+      esac
+    fi
+    # $CC -shared without GNU ld will not create a library from C++
+    # object files and a static libstdc++, better avoid it by now
+    archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+    archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
+    hardcode_libdir_flag_spec='-R$libdir'
+    hardcode_shlibpath_var=no
+    case $host_os in
+    solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+    *) # Supported since Solaris 2.6 (maybe 2.5.1?)
+      whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;;
+    esac
+    link_all_deplibs=yes
+    ;;
+
+  sunos4*)
+    if test "x$host_vendor" = xsequent; then
+      # Use $CC to link under sequent, because it throws in some extra .o
+      # files that make .init and .fini sections work.
+      archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+    else
+      archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+    fi
+    hardcode_libdir_flag_spec='-L$libdir'
+    hardcode_direct=yes
+    hardcode_minus_L=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  sysv4)
+    case $host_vendor in
+      sni)
+        archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+        hardcode_direct=yes # is this really true???
+        ;;
+      siemens)
+        ## LD is ld it makes a PLAMLIB
+        ## CC just makes a GrossModule.
+        archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+        reload_cmds='$CC -r -o $output$reload_objs'
+        hardcode_direct=no
+        ;;
+      motorola)
+        archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+        hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+        ;;
+    esac
+    runpath_var='LD_RUN_PATH'
+    hardcode_shlibpath_var=no
+    ;;
+
+  sysv4.3*)
+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+    hardcode_shlibpath_var=no
+    export_dynamic_flag_spec='-Bexport'
+    ;;
+
+  sysv5*)
+    no_undefined_flag=' -z text'
+    # $CC -shared without GNU ld will not create a library from C++
+    # object files and a static libstdc++, better avoid it by now
+    archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+    archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
+    hardcode_libdir_flag_spec=
+    hardcode_shlibpath_var=no
+    runpath_var='LD_RUN_PATH'
+    ;;
+
+  uts4*)
+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+    hardcode_libdir_flag_spec='-L$libdir'
+    hardcode_shlibpath_var=no
+    ;;
+
+  dgux*)
+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+    hardcode_libdir_flag_spec='-L$libdir'
+    hardcode_shlibpath_var=no
+    ;;
+
+  sysv4*MP*)
+    if test -d /usr/nec; then
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_shlibpath_var=no
+      runpath_var=LD_RUN_PATH
+      hardcode_runpath_var=yes
+      ld_shlibs=yes
+    fi
+    ;;
+
+  sysv4.2uw2*)
+    archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+    hardcode_direct=yes
+    hardcode_minus_L=no
+    hardcode_shlibpath_var=no
+    hardcode_runpath_var=yes
+    runpath_var=LD_RUN_PATH
+    ;;
+
+  sysv5uw7* | unixware7*)
+    no_undefined_flag='${wl}-z ${wl}text'
+    if test "$GCC" = yes; then
+      archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+    else
+      archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+    fi
+    runpath_var='LD_RUN_PATH'
+    hardcode_shlibpath_var=no
+    ;;
+
+  *)
+    ld_shlibs=no
+    ;;
+  esac
+fi
+AC_MSG_RESULT([$ld_shlibs])
+test "$ld_shlibs" = no && can_build_shared=no
+
+# Check hardcoding attributes.
+AC_MSG_CHECKING([how to hardcode library paths into programs])
+hardcode_action=
+if test -n "$hardcode_libdir_flag_spec" || \
+   test -n "$runpath_var"; then
+
+  # We can hardcode non-existant directories.
+  if test "$hardcode_direct" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$hardcode_shlibpath_var" != no &&
+     test "$hardcode_minus_L" != no; then
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action=unsupported
+fi
+AC_MSG_RESULT([$hardcode_action])
+
+striplib=
+old_striplib=
+AC_MSG_CHECKING([whether stripping libraries is possible])
+if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
+  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+  AC_MSG_RESULT([yes])
+else
+  AC_MSG_RESULT([no])
+fi
+
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+
+# PORTME Fill in your ld.so characteristics
+AC_MSG_CHECKING([dynamic linker characteristics])
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+
+case $host_os in
+aix3*)
+  version_type=linux
+  library_names_spec='${libname}${release}.so$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}.so$major'
+  ;;
+
+aix4* | aix5*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test "$host_cpu" = ia64; then
+    # AIX 5 supports IA64
+    library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so'
+    shlibpath_var=LD_LIBRARY_PATH
+  else
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line `#! .'.  This would cause the generated library to
+    # depend on `.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[[01]] | aix4.[[01]].*)
+	if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	     echo ' yes '
+	     echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
+	  :
+	else
+	  can_build_shared=no
+	fi
+	;;
+    esac
+    # AIX (on Power*) has no versioning support, so currently we can
+    # not hardcode correct soname into executable. Probably we can
+    # add versioning support to collect2, so additional links can
+    # be useful in future.
+    if test "$aix_use_runtimelinking" = yes; then
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+    else
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='${libname}${release}.a $libname.a'
+      soname_spec='${libname}${release}.so$major'
+    fi
+    shlibpath_var=LIBPATH
+  fi
+  hardcode_into_libs=yes
+  ;;
+
+amigaos*)
+  library_names_spec='$libname.ixlibrary $libname.a'
+  # Create ${libname}_ixlibrary.a entries in /sys/libs.
+  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
+  ;;
+
+beos*)
+  library_names_spec='${libname}.so'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  ;;
+
+bsdi4*)
+  version_type=linux
+  need_version=no
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  soname_spec='${libname}${release}.so$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  export_dynamic_flag_spec=-rdynamic
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw* | pw32*)
+  version_type=windows
+  need_version=no
+  need_lib_prefix=no
+  case $GCC,$host_os in
+  yes,cygwin*)
+    library_names_spec='$libname.dll.a'
+    soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll'
+    postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog .libs/$dlname \$dldir/$dlname'
+    postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $rm \$dlpath'
+    ;;
+  yes,mingw*)
+    library_names_spec='${libname}`echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll'
+    sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g" -e "s,=/,/,g"`
+    ;;
+  yes,pw32*)
+    library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll'
+    ;;
+  *)
+    library_names_spec='${libname}`echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll $libname.lib'
+    ;;
+  esac
+  dynamic_linker='Win32 ld.exe'
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  ;;
+
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  # FIXME: Relying on posixy $() will cause problems for
+  #        cross-compilation, but unfortunately the echo tests do not
+  #        yet detect zsh echo's removal of \ escapes.
+  library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)'
+  soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  ;;
+
+freebsd1*)
+  dynamic_linker=no
+  ;;
+
+freebsd*-gnu*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  soname_spec='${libname}${release}.so$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='GNU/FreeBSD ld.so'
+  ;;
+
+freebsd*)
+  objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  *)
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
+
+gnu*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so'
+  soname_spec='${libname}${release}.so$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  hardcode_into_libs=yes
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  dynamic_linker="$host_os dld.sl"
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  shlibpath_var=SHLIB_PATH
+  shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+  library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl'
+  soname_spec='${libname}${release}.sl$major'
+  # HP-UX runs *really* slowly unless shared libraries are mode 555.
+  postinstall_cmds='chmod 555 $lib'
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)          version_type=irix ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}.so$major'
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*)
+  dynamic_linker=no
+  ;;
+
+# This must be Linux ELF.
+linux-gnu*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  soname_spec='${libname}${release}.so$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
+
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+    library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so'
+    soname_spec='${libname}${release}.so$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
+
+newsos6)
+  version_type=linux
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+openbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    case "$host_os" in
+    openbsd2.[[89]] | openbsd2.[[89]].*)
+      shlibpath_overrides_runpath=no
+      ;;
+    *)
+      shlibpath_overrides_runpath=yes
+      ;;
+    esac
+  else
+    shlibpath_overrides_runpath=yes
+  fi
+  library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+os2*)
+  libname_spec='$name'
+  need_lib_prefix=no
+  library_names_spec='$libname.dll $libname.a'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=LIBPATH
+  ;;
+
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_version=no
+  need_lib_prefix=no
+  soname_spec='${libname}${release}.so$major'
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  hardcode_into_libs=yes
+  ;;
+
+sco3.2v5*)
+  version_type=osf
+  soname_spec='${libname}${release}.so$major'
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+solaris*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  soname_spec='${libname}${release}.so$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+  version_type=linux
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  soname_spec='${libname}${release}.so$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      export_dynamic_flag_spec='${wl}-Blargedynsym'
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      ;;
+  esac
+  ;;
+
+uts4*)
+  version_type=linux
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  soname_spec='${libname}${release}.so$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+dgux*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  soname_spec='${libname}${release}.so$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec ;then
+    version_type=linux
+    library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so'
+    soname_spec='$libname.so.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+AC_MSG_RESULT([$dynamic_linker])
+test "$dynamic_linker" = no && can_build_shared=no
+
+# Report the final consequences.
+AC_MSG_CHECKING([if libtool supports shared libraries])
+AC_MSG_RESULT([$can_build_shared])
+
+AC_MSG_CHECKING([whether to build shared libraries])
+test "$can_build_shared" = "no" && enable_shared=no
+
+# On AIX, shared libraries and static libraries use the same namespace, and
+# are all built from PIC.
+case "$host_os" in
+aix3*)
+  test "$enable_shared" = yes && enable_static=no
+  if test -n "$RANLIB"; then
+    archive_cmds="$archive_cmds~\$RANLIB \$lib"
+    postinstall_cmds='$RANLIB $lib'
+  fi
+  ;;
+
+aix4*)
+  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+    test "$enable_shared" = yes && enable_static=no
+  fi
+  ;;
+esac
+AC_MSG_RESULT([$enable_shared])
+
+AC_MSG_CHECKING([whether to build static libraries])
+# Make sure either enable_shared or enable_static is yes.
+test "$enable_shared" = yes || enable_static=yes
+AC_MSG_RESULT([$enable_static])
+
+if test "$hardcode_action" = relink; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+AC_LIBTOOL_DLOPEN_SELF
+
+if test "$enable_shared" = yes && test "$GCC" = yes; then
+  case $archive_cmds in
+  *'~'*)
+    # FIXME: we may have to deal with multi-command sequences.
+    ;;
+  '$CC '*)
+    # Test whether the compiler implicitly links with -lc since on some
+    # systems, -lgcc has to come before -lc. If gcc already passes -lc
+    # to ld, don't add -lc before -lgcc.
+    AC_MSG_CHECKING([whether -lc should be explicitly linked in])
+    AC_CACHE_VAL([lt_cv_archive_cmds_need_lc],
+    [$rm conftest*
+    echo 'static int dummy;' > conftest.$ac_ext
+
+    if AC_TRY_EVAL(ac_compile); then
+      soname=conftest
+      lib=conftest
+      libobjs=conftest.$ac_objext
+      deplibs=
+      wl=$lt_cv_prog_cc_wl
+      compiler_flags=-v
+      linker_flags=-v
+      verstring=
+      output_objdir=.
+      libname=conftest
+      save_allow_undefined_flag=$allow_undefined_flag
+      allow_undefined_flag=
+      if AC_TRY_EVAL(archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1)
+      then
+	lt_cv_archive_cmds_need_lc=no
+      else
+	lt_cv_archive_cmds_need_lc=yes
+      fi
+      allow_undefined_flag=$save_allow_undefined_flag
+    else
+      cat conftest.err 1>&5
+    fi])
+    AC_MSG_RESULT([$lt_cv_archive_cmds_need_lc])
+    ;;
+  esac
+fi
+need_lc=${lt_cv_archive_cmds_need_lc-yes}
+
+# The second clause should only fire when bootstrapping the
+# libtool distribution, otherwise you forgot to ship ltmain.sh
+# with your package, and you will get complaints that there are
+# no rules to generate ltmain.sh.
+if test -f "$ltmain"; then
+  :
+else
+  # If there is no Makefile yet, we rely on a make rule to execute
+  # `config.status --recheck' to rerun these tests and create the
+  # libtool script then.
+  test -f Makefile && make "$ltmain"
+fi
+
+if test -f "$ltmain"; then
+  trap "$rm \"${ofile}T\"; exit 1" 1 2 15
+  $rm -f "${ofile}T"
+
+  echo creating $ofile
+
+  # Now quote all the things that may contain metacharacters while being
+  # careful not to overquote the AC_SUBSTed values.  We take copies of the
+  # variables and quote the copies for generation of the libtool script.
+  for var in echo old_CC old_CFLAGS SED \
+    AR AR_FLAGS CC LD LN_S NM SHELL \
+    reload_flag reload_cmds wl \
+    pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \
+    thread_safe_flag_spec whole_archive_flag_spec libname_spec \
+    library_names_spec soname_spec \
+    RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \
+    old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds \
+    postuninstall_cmds extract_expsyms_cmds old_archive_from_expsyms_cmds \
+    old_striplib striplib file_magic_cmd export_symbols_cmds \
+    deplibs_check_method allow_undefined_flag no_undefined_flag \
+    finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \
+    global_symbol_to_c_name_address \
+    hardcode_libdir_flag_spec hardcode_libdir_separator  \
+    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
+    compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do
+
+    case $var in
+    reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \
+    old_postinstall_cmds | old_postuninstall_cmds | \
+    export_symbols_cmds | archive_cmds | archive_expsym_cmds | \
+    extract_expsyms_cmds | old_archive_from_expsyms_cmds | \
+    postinstall_cmds | postuninstall_cmds | \
+    finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
+      # Double-quote double-evaled strings.
+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
+      ;;
+    *)
+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
+      ;;
+    esac
+  done
+
+  cat <<__EOF__ > "${ofile}T"
+#! $SHELL
+
+# `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+# Copyright (C) 1996-2000 Free Software Foundation, Inc.
+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# A sed that does not truncate output.
+SED=$lt_SED
+
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="${SED} -e s/^X//"
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
+
+# ### BEGIN LIBTOOL CONFIG
+
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$need_lc
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# The host system.
+host_alias=$host_alias
+host=$host
+
+# An echo program that does not interpret backslashes.
+echo=$lt_echo
+
+# The archiver.
+AR=$lt_AR
+AR_FLAGS=$lt_AR_FLAGS
+
+# The default C compiler.
+CC=$lt_CC
+
+# Is the compiler the GNU C compiler?
+with_gcc=$GCC
+
+# The linker used to build libraries.
+LD=$lt_LD
+
+# Whether we need hard or soft links.
+LN_S=$lt_LN_S
+
+# A BSD-compatible nm program.
+NM=$lt_NM
+
+# A symbol stripping program
+STRIP=$STRIP
+
+# Used to examine libraries when file_magic_cmd begins "file"
+MAGIC_CMD=$MAGIC_CMD
+
+# Used on cygwin: DLL creation program.
+DLLTOOL="$DLLTOOL"
+
+# Used on cygwin: object dumper.
+OBJDUMP="$OBJDUMP"
+
+# Used on cygwin: assembler.
+AS="$AS"
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
+# How to pass a linker flag through the compiler.
+wl=$lt_wl
+
+# Object file suffix (normally "o").
+objext="$ac_objext"
+
+# Old archive suffix (normally "a").
+libext="$libext"
+
+# Executable file suffix (normally "").
+exeext="$exeext"
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_pic_flag
+pic_mode=$pic_mode
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_compiler_c_o
+
+# Can we write directly to a .lo ?
+compiler_o_lo=$lt_compiler_o_lo
+
+# Must we lock files when doing compilation ?
+need_locks=$lt_need_locks
+
+# Do we need the lib prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_link_static_flag
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_no_builtin_flag
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec
+
+# Compiler flag to generate thread-safe objects.
+thread_safe_flag_spec=$lt_thread_safe_flag_spec
+
+# Library versioning type.
+version_type=$version_type
+
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+
+# List of archive names.  First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME.
+library_names_spec=$lt_library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+
+# Commands used to build and install an old-style archive.
+RANLIB=$lt_RANLIB
+old_archive_cmds=$lt_old_archive_cmds
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
+
+# Commands used to build and install a shared archive.
+archive_cmds=$lt_archive_cmds
+archive_expsym_cmds=$lt_archive_expsym_cmds
+postinstall_cmds=$lt_postinstall_cmds
+postuninstall_cmds=$lt_postuninstall_cmds
+
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+
+# Command to use when deplibs_check_method == file_magic.
+file_magic_cmd=$lt_file_magic_cmd
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag
+
+# Flag that forces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+
+# Same as above, but a single script fragment to be evaled but not shown.
+finish_eval=$lt_finish_eval
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration
+global_symbol_to_cdecl=$lt_global_symbol_to_cdecl
+
+# Transform the output of nm in a C name address pair
+global_symbol_to_c_name_address=$lt_global_symbol_to_c_name_address
+
+# This is the shared library runtime path variable.
+runpath_var=$runpath_var
+
+# This is the shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
+
+# Whether we need a single -rpath flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator
+
+# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
+# resulting binary.
+hardcode_direct=$hardcode_direct
+
+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
+# resulting binary.
+hardcode_minus_L=$hardcode_minus_L
+
+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
+# the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at relink time.
+variables_saved_for_relink="$variables_saved_for_relink"
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs
+
+# Compile-time system search path for libraries
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+# Run-time system search path for libraries
+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+
+# Fix the shell variable \$srcfile for the compiler.
+fix_srcfile_path="$fix_srcfile_path"
+
+# Set to yes if exported symbols are required.
+always_export_symbols=$always_export_symbols
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms
+
+# ### END LIBTOOL CONFIG
+
+__EOF__
+
+  case $host_os in
+  aix3*)
+    cat <<\EOF >> "${ofile}T"
+
+# AIX sometimes has problems with the GCC collect2 program.  For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+  COLLECT_NAMES=
+  export COLLECT_NAMES
+fi
+EOF
+    ;;
+  esac
+
+  case $host_os in
+  cygwin* | mingw* | pw32* | os2*)
+    cat <<'EOF' >> "${ofile}T"
+      # This is a source program that is used to create dlls on Windows
+      # Don't remove nor modify the starting and closing comments
+# /* ltdll.c starts here */
+# #define WIN32_LEAN_AND_MEAN
+# #include <windows.h>
+# #undef WIN32_LEAN_AND_MEAN
+# #include <stdio.h>
+#
+# #ifndef __CYGWIN__
+# #  ifdef __CYGWIN32__
+# #    define __CYGWIN__ __CYGWIN32__
+# #  endif
+# #endif
+#
+# #ifdef __cplusplus
+# extern "C" {
+# #endif
+# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
+# #ifdef __cplusplus
+# }
+# #endif
+#
+# #ifdef __CYGWIN__
+# #include <cygwin/cygwin_dll.h>
+# DECLARE_CYGWIN_DLL( DllMain );
+# #endif
+# HINSTANCE __hDllInstance_base;
+#
+# BOOL APIENTRY
+# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
+# {
+#   __hDllInstance_base = hInst;
+#   return TRUE;
+# }
+# /* ltdll.c ends here */
+	# This is a source program that is used to create import libraries
+	# on Windows for dlls which lack them. Don't remove nor modify the
+	# starting and closing comments
+# /* impgen.c starts here */
+# /*   Copyright (C) 1999-2000 Free Software Foundation, Inc.
+#
+#  This file is part of GNU libtool.
+#
+#  This program is free software; you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation; either version 2 of the License, or
+#  (at your option) any later version.
+#
+#  This program is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with this program; if not, write to the Free Software
+#  Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#  */
+#
+# #include <stdio.h>		/* for printf() */
+# #include <unistd.h>		/* for open(), lseek(), read() */
+# #include <fcntl.h>		/* for O_RDONLY, O_BINARY */
+# #include <string.h>		/* for strdup() */
+#
+# /* O_BINARY isn't required (or even defined sometimes) under Unix */
+# #ifndef O_BINARY
+# #define O_BINARY 0
+# #endif
+#
+# static unsigned int
+# pe_get16 (fd, offset)
+#      int fd;
+#      int offset;
+# {
+#   unsigned char b[2];
+#   lseek (fd, offset, SEEK_SET);
+#   read (fd, b, 2);
+#   return b[0] + (b[1]<<8);
+# }
+#
+# static unsigned int
+# pe_get32 (fd, offset)
+#     int fd;
+#     int offset;
+# {
+#   unsigned char b[4];
+#   lseek (fd, offset, SEEK_SET);
+#   read (fd, b, 4);
+#   return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
+# }
+#
+# static unsigned int
+# pe_as32 (ptr)
+#      void *ptr;
+# {
+#   unsigned char *b = ptr;
+#   return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
+# }
+#
+# int
+# main (argc, argv)
+#     int argc;
+#     char *argv[];
+# {
+#     int dll;
+#     unsigned long pe_header_offset, opthdr_ofs, num_entries, i;
+#     unsigned long export_rva, export_size, nsections, secptr, expptr;
+#     unsigned long name_rvas, nexp;
+#     unsigned char *expdata, *erva;
+#     char *filename, *dll_name;
+#
+#     filename = argv[1];
+#
+#     dll = open(filename, O_RDONLY|O_BINARY);
+#     if (dll < 1)
+# 	return 1;
+#
+#     dll_name = filename;
+#
+#     for (i=0; filename[i]; i++)
+# 	if (filename[i] == '/' || filename[i] == '\\'  || filename[i] == ':')
+# 	    dll_name = filename + i +1;
+#
+#     pe_header_offset = pe_get32 (dll, 0x3c);
+#     opthdr_ofs = pe_header_offset + 4 + 20;
+#     num_entries = pe_get32 (dll, opthdr_ofs + 92);
+#
+#     if (num_entries < 1) /* no exports */
+# 	return 1;
+#
+#     export_rva = pe_get32 (dll, opthdr_ofs + 96);
+#     export_size = pe_get32 (dll, opthdr_ofs + 100);
+#     nsections = pe_get16 (dll, pe_header_offset + 4 +2);
+#     secptr = (pe_header_offset + 4 + 20 +
+# 	      pe_get16 (dll, pe_header_offset + 4 + 16));
+#
+#     expptr = 0;
+#     for (i = 0; i < nsections; i++)
+#     {
+# 	char sname[8];
+# 	unsigned long secptr1 = secptr + 40 * i;
+# 	unsigned long vaddr = pe_get32 (dll, secptr1 + 12);
+# 	unsigned long vsize = pe_get32 (dll, secptr1 + 16);
+# 	unsigned long fptr = pe_get32 (dll, secptr1 + 20);
+# 	lseek(dll, secptr1, SEEK_SET);
+# 	read(dll, sname, 8);
+# 	if (vaddr <= export_rva && vaddr+vsize > export_rva)
+# 	{
+# 	    expptr = fptr + (export_rva - vaddr);
+# 	    if (export_rva + export_size > vaddr + vsize)
+# 		export_size = vsize - (export_rva - vaddr);
+# 	    break;
+# 	}
+#     }
+#
+#     expdata = (unsigned char*)malloc(export_size);
+#     lseek (dll, expptr, SEEK_SET);
+#     read (dll, expdata, export_size);
+#     erva = expdata - export_rva;
+#
+#     nexp = pe_as32 (expdata+24);
+#     name_rvas = pe_as32 (expdata+32);
+#
+#     printf ("EXPORTS\n");
+#     for (i = 0; i<nexp; i++)
+#     {
+# 	unsigned long name_rva = pe_as32 (erva+name_rvas+i*4);
+# 	printf ("\t%s @ %ld ;\n", erva+name_rva, 1+ i);
+#     }
+#
+#     return 0;
+# }
+# /* impgen.c ends here */
+
+EOF
+    ;;
+  esac
+
+  # We use sed instead of cat because bash on DJGPP gets confused if
+  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
+  # text mode, it properly converts lines to CR/LF.  This bash problem
+  # is reportedly fixed, but why not run on old versions too?
+  sed '$q' "$ltmain" >> "${ofile}T" || (rm -f "${ofile}T"; exit 1)
+
+  mv -f "${ofile}T" "$ofile" || \
+    (rm -f "$ofile" && cp "${ofile}T" "$ofile" && rm -f "${ofile}T")
+  chmod +x "$ofile"
+fi
+
+])# _LT_AC_LTCONFIG_HACK
+
+# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
+AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
+
+# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
+AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
+
+# AC_ENABLE_SHARED - implement the --enable-shared flag
+# Usage: AC_ENABLE_SHARED[(DEFAULT)]
+#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
+#   `yes'.
+AC_DEFUN([AC_ENABLE_SHARED],
+[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE(shared,
+changequote(<<, >>)dnl
+<<  --enable-shared[=PKGS]  build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
+changequote([, ])dnl
+[p=${PACKAGE-default}
+case $enableval in
+yes) enable_shared=yes ;;
+no) enable_shared=no ;;
+*)
+  enable_shared=no
+  # Look at the argument we got.  We use all the common list separators.
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+  for pkg in $enableval; do
+    if test "X$pkg" = "X$p"; then
+      enable_shared=yes
+    fi
+  done
+  IFS="$ac_save_ifs"
+  ;;
+esac],
+enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
+])
+
+# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
+AC_DEFUN([AC_DISABLE_SHARED],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_SHARED(no)])
+
+# AC_ENABLE_STATIC - implement the --enable-static flag
+# Usage: AC_ENABLE_STATIC[(DEFAULT)]
+#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
+#   `yes'.
+AC_DEFUN([AC_ENABLE_STATIC],
+[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE(static,
+changequote(<<, >>)dnl
+<<  --enable-static[=PKGS]  build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
+changequote([, ])dnl
+[p=${PACKAGE-default}
+case $enableval in
+yes) enable_static=yes ;;
+no) enable_static=no ;;
+*)
+  enable_static=no
+  # Look at the argument we got.  We use all the common list separators.
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+  for pkg in $enableval; do
+    if test "X$pkg" = "X$p"; then
+      enable_static=yes
+    fi
+  done
+  IFS="$ac_save_ifs"
+  ;;
+esac],
+enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
+])
+
+# AC_DISABLE_STATIC - set the default static flag to --disable-static
+AC_DEFUN([AC_DISABLE_STATIC],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_STATIC(no)])
+
+
+# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
+# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
+#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
+#   `yes'.
+AC_DEFUN([AC_ENABLE_FAST_INSTALL],
+[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE(fast-install,
+changequote(<<, >>)dnl
+<<  --enable-fast-install[=PKGS]  optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
+changequote([, ])dnl
+[p=${PACKAGE-default}
+case $enableval in
+yes) enable_fast_install=yes ;;
+no) enable_fast_install=no ;;
+*)
+  enable_fast_install=no
+  # Look at the argument we got.  We use all the common list separators.
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+  for pkg in $enableval; do
+    if test "X$pkg" = "X$p"; then
+      enable_fast_install=yes
+    fi
+  done
+  IFS="$ac_save_ifs"
+  ;;
+esac],
+enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
+])
+
+# AC_DISABLE_FAST_INSTALL - set the default to --disable-fast-install
+AC_DEFUN([AC_DISABLE_FAST_INSTALL],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_FAST_INSTALL(no)])
+
+# AC_LIBTOOL_PICMODE - implement the --with-pic flag
+# Usage: AC_LIBTOOL_PICMODE[(MODE)]
+#   Where MODE is either `yes' or `no'.  If omitted, it defaults to
+#   `both'.
+AC_DEFUN([AC_LIBTOOL_PICMODE],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+pic_mode=ifelse($#,1,$1,default)])
+
+
+# AC_PATH_TOOL_PREFIX - find a file program which can recognise shared library
+AC_DEFUN([AC_PATH_TOOL_PREFIX],
+[AC_MSG_CHECKING([for $1])
+AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
+[case $MAGIC_CMD in
+  /*)
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+  ?:/*)
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
+  ;;
+  *)
+  ac_save_MAGIC_CMD="$MAGIC_CMD"
+  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
+dnl $ac_dummy forces splitting on constant user-supplied paths.
+dnl POSIX.2 word splitting is done only on the output of word expansions,
+dnl not every word.  This closes a longstanding sh security hole.
+  ac_dummy="ifelse([$2], , $PATH, [$2])"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$1; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/$1"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    egrep "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  MAGIC_CMD="$ac_save_MAGIC_CMD"
+  ;;
+esac])
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  AC_MSG_RESULT($MAGIC_CMD)
+else
+  AC_MSG_RESULT(no)
+fi
+])
+
+
+# AC_PATH_MAGIC - find a file program which can recognise a shared library
+AC_DEFUN([AC_PATH_MAGIC],
+[AC_REQUIRE([AC_CHECK_TOOL_PREFIX])dnl
+AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin:$PATH)
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+  if test -n "$ac_tool_prefix"; then
+    AC_PATH_TOOL_PREFIX(file, /usr/bin:$PATH)
+  else
+    MAGIC_CMD=:
+  fi
+fi
+])
+
+
+# AC_PROG_LD - find the path to the GNU or non-GNU linker
+AC_DEFUN([AC_PROG_LD],
+[AC_ARG_WITH(gnu-ld,
+[  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]],
+test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl
+ac_prog=ld
+if test "$GCC" = yes; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  AC_MSG_CHECKING([for ld used by GCC])
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
+    # Accept absolute paths.
+    [[\\/]]* | [[A-Za-z]]:[[\\/]]*)
+      re_direlt='/[[^/]][[^/]]*/\.\./'
+      # Canonicalize the path of ld
+      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD="$ac_prog"
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test "$with_gnu_ld" = yes; then
+  AC_MSG_CHECKING([for GNU ld])
+else
+  AC_MSG_CHECKING([for non-GNU ld])
+fi
+AC_CACHE_VAL(lt_cv_path_LD,
+[if test -z "$LD"; then
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for ac_dir in $PATH; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      lt_cv_path_LD="$ac_dir/$ac_prog"
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some GNU ld's only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+	test "$with_gnu_ld" != no && break
+      else
+	test "$with_gnu_ld" != yes && break
+      fi
+    fi
+  done
+  IFS="$ac_save_ifs"
+else
+  lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi])
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+  AC_MSG_RESULT($LD)
+else
+  AC_MSG_RESULT(no)
+fi
+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+AC_PROG_LD_GNU
+])
+
+# AC_PROG_LD_GNU -
+AC_DEFUN([AC_PROG_LD_GNU],
+[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
+[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
+if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
+  lt_cv_prog_gnu_ld=yes
+else
+  lt_cv_prog_gnu_ld=no
+fi])
+with_gnu_ld=$lt_cv_prog_gnu_ld
+])
+
+# AC_PROG_LD_RELOAD_FLAG - find reload flag for linker
+#   -- PORTME Some linkers may need a different reload flag.
+AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
+[AC_CACHE_CHECK([for $LD option to reload object files], lt_cv_ld_reload_flag,
+[lt_cv_ld_reload_flag='-r'])
+reload_flag=$lt_cv_ld_reload_flag
+test -n "$reload_flag" && reload_flag=" $reload_flag"
+])
+
+# AC_DEPLIBS_CHECK_METHOD - how to check for library dependencies
+#  -- PORTME fill in with the dynamic library characteristics
+AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
+[AC_CACHE_CHECK([how to recognise dependent libraries],
+lt_cv_deplibs_check_method,
+[lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given egrep regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix4* | aix5*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+beos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+bsdi4*)
+  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
+  lt_cv_file_magic_cmd='/usr/bin/file -L'
+  lt_cv_file_magic_test_file=/shlib/libc.so
+  ;;
+
+cygwin* | mingw* | pw32*)
+  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+  lt_cv_file_magic_cmd='$OBJDUMP -f'
+  ;;
+
+darwin* | rhapsody*)
+  lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
+  lt_cv_file_magic_cmd='/usr/bin/file -L'
+  case "$host_os" in
+  rhapsody* | darwin1.[[012]])
+    lt_cv_file_magic_test_file=`echo /System/Library/Frameworks/System.framework/Versions/*/System | head -1`
+    ;;
+  *) # Darwin 1.3 on
+    lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
+    ;;
+  esac
+  ;;
+
+freebsd*)
+  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+    case $host_cpu in
+    i*86 )
+      # Not sure whether the presence of OpenBSD here was a mistake.
+      # Let's accept both of them until this is cleared up.
+      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library'
+      lt_cv_file_magic_cmd=/usr/bin/file
+      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+      ;;
+    esac
+  else
+    lt_cv_deplibs_check_method=pass_all
+  fi
+  ;;
+
+gnu*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+hpux10.20*|hpux11*)
+  lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
+  lt_cv_file_magic_cmd=/usr/bin/file
+  lt_cv_file_magic_test_file=/usr/lib/libc.sl
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+  irix5* | nonstopux*)
+    # this will be overridden with pass_all, but let us keep it just in case
+    lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
+    ;;
+  *)
+    case $LD in
+    *-32|*"-32 ") libmagic=32-bit;;
+    *-n32|*"-n32 ") libmagic=N32;;
+    *-64|*"-64 ") libmagic=64-bit;;
+    *) libmagic=never-match;;
+    esac
+    # this will be overridden with pass_all, but let us keep it just in case
+    lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[[1234]] dynamic lib MIPS - version 1"
+    ;;
+  esac
+  lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+# This must be Linux ELF.
+linux-gnu*)
+  case $host_cpu in
+  alpha* | hppa* | i*86 | mips | mipsel | powerpc* | sparc* | ia64*)
+    lt_cv_deplibs_check_method=pass_all ;;
+  *)
+    # glibc up to 2.1.1 does not perform some relocations on ARM
+    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;;
+  esac
+  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
+  ;;
+
+netbsd*)
+  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+    lt_cv_deplibs_check_method='match_pattern /lib[[^/\.]]+\.so\.[[0-9]]+\.[[0-9]]+$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[[^/\.]]+\.so$'
+  fi
+  ;;
+
+newos6*)
+  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
+  lt_cv_file_magic_cmd=/usr/bin/file
+  lt_cv_file_magic_test_file=/usr/lib/libnls.so
+  ;;
+
+openbsd*)
+  lt_cv_file_magic_cmd=/usr/bin/file
+  lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object'
+  else
+    lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library'
+  fi
+  ;;
+
+osf3* | osf4* | osf5*)
+  # this will be overridden with pass_all, but let us keep it just in case
+  lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
+  lt_cv_file_magic_test_file=/shlib/libc.so
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sco3.2v5*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+solaris*)
+  lt_cv_deplibs_check_method=pass_all
+  lt_cv_file_magic_test_file=/lib/libc.so
+  ;;
+
+sysv5uw[[78]]* | sysv4*uw2*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+  case $host_vendor in
+  motorola)
+    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
+    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+    ;;
+  ncr)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  sequent)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
+    ;;
+  sni)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
+    lt_cv_file_magic_test_file=/lib/libc.so
+    ;;
+  siemens)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  esac
+  ;;
+esac
+])
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+])
+
+
+# AC_PROG_NM - find the path to a BSD-compatible name lister
+AC_DEFUN([AC_PROG_NM],
+[AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl
+AC_MSG_CHECKING([for BSD-compatible nm])
+AC_CACHE_VAL(lt_cv_path_NM,
+[if test -n "$NM"; then
+  # Let the user override the test.
+  lt_cv_path_NM="$NM"
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
+    test -z "$ac_dir" && ac_dir=.
+    tmp_nm=$ac_dir/${ac_tool_prefix}nm
+    if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
+      # Check to see if the nm accepts a BSD-compat flag.
+      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+      #   nm: unknown option "B" ignored
+      # Tru64's nm complains that /dev/null is an invalid object file
+      if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
+	lt_cv_path_NM="$tmp_nm -B"
+	break
+      elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+	lt_cv_path_NM="$tmp_nm -p"
+	break
+      else
+	lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+	continue # so that we can try to find one that supports BSD flags
+      fi
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
+fi])
+NM="$lt_cv_path_NM"
+AC_MSG_RESULT([$NM])
+])
+
+# AC_CHECK_LIBM - check for math library
+AC_DEFUN([AC_CHECK_LIBM],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+LIBM=
+case $host in
+*-*-beos* | *-*-cygwin* | *-*-pw32*)
+  # These system don't have libm
+  ;;
+*-ncr-sysv4.3*)
+  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+  AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
+  ;;
+*)
+  AC_CHECK_LIB(m, main, LIBM="-lm")
+  ;;
+esac
+])
+
+# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
+# the libltdl convenience library and LTDLINCL to the include flags for
+# the libltdl header and adds --enable-ltdl-convenience to the
+# configure arguments.  Note that LIBLTDL and LTDLINCL are not
+# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called.  If DIR is not
+# provided, it is assumed to be `libltdl'.  LIBLTDL will be prefixed
+# with '${top_builddir}/' and LTDLINCL will be prefixed with
+# '${top_srcdir}/' (note the single quotes!).  If your package is not
+# flat and you're not using automake, define top_builddir and
+# top_srcdir appropriately in the Makefiles.
+AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+  case $enable_ltdl_convenience in
+  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
+  "") enable_ltdl_convenience=yes
+      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
+  esac
+  LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
+  LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
+  # For backwards non-gettext consistent compatibility...
+  INCLTDL="$LTDLINCL"
+])
+
+# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
+# the libltdl installable library and LTDLINCL to the include flags for
+# the libltdl header and adds --enable-ltdl-install to the configure
+# arguments.  Note that LIBLTDL and LTDLINCL are not AC_SUBSTed, nor is
+# AC_CONFIG_SUBDIRS called.  If DIR is not provided and an installed
+# libltdl is not found, it is assumed to be `libltdl'.  LIBLTDL will
+# be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed
+# with '${top_srcdir}/' (note the single quotes!).  If your package is
+# not flat and you're not using automake, define top_builddir and
+# top_srcdir appropriately in the Makefiles.
+# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
+AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+  AC_CHECK_LIB(ltdl, main,
+  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
+  [if test x"$enable_ltdl_install" = xno; then
+     AC_MSG_WARN([libltdl not installed, but installation disabled])
+   else
+     enable_ltdl_install=yes
+   fi
+  ])
+  if test x"$enable_ltdl_install" = x"yes"; then
+    ac_configure_args="$ac_configure_args --enable-ltdl-install"
+    LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
+    LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
+  else
+    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
+    LIBLTDL="-lltdl"
+    LTDLINCL=
+  fi
+  # For backwards non-gettext consistent compatibility...
+  INCLTDL="$LTDLINCL"
+])
+
+# old names
+AC_DEFUN([AM_PROG_LIBTOOL],   [AC_PROG_LIBTOOL])
+AC_DEFUN([AM_ENABLE_SHARED],  [AC_ENABLE_SHARED($@)])
+AC_DEFUN([AM_ENABLE_STATIC],  [AC_ENABLE_STATIC($@)])
+AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
+AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
+AC_DEFUN([AM_PROG_LD],        [AC_PROG_LD])
+AC_DEFUN([AM_PROG_NM],        [AC_PROG_NM])
+
+# This is just to silence aclocal about the macro not being used
+ifelse([AC_DISABLE_FAST_INSTALL])
+
+# NOTE: This macro has been submitted for inclusion into   #
+#  GNU Autoconf as AC_PROG_SED.  When it is available in   #
+#  a released version of Autoconf we should remove this    #
+#  macro and use it instead.                               #
+# LT_AC_PROG_SED
+# --------------
+# Check for a fully-functional sed program, that truncates
+# as few characters as possible.  Prefer GNU sed if found.
+AC_DEFUN([LT_AC_PROG_SED],
+[AC_MSG_CHECKING([for a sed that does not truncate output])
+AC_CACHE_VAL(lt_cv_path_SED,
+[# Loop through the user's path and test for sed and gsed.
+# Then use that list of sed's as ones to test for truncation.
+as_executable_p="test -f"
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_prog in sed gsed; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
+        _sed_list="$_sed_list $as_dir/$ac_prog$ac_exec_ext"
+      fi
+    done
+  done
+done
+
+  # Create a temporary directory, and hook for its removal unless debugging.
+$debug ||
+{
+  trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
+  trap '{ (exit 1); exit 1; }' 1 2 13 15
+}
+
+# Create a (secure) tmp directory for tmp files.
+: ${TMPDIR=/tmp}
+{
+  tmp=`(umask 077 && mktemp -d -q "$TMPDIR/sedXXXXXX") 2>/dev/null` &&
+  test -n "$tmp" && test -d "$tmp"
+}  ||
+{
+  tmp=$TMPDIR/sed$$-$RANDOM
+  (umask 077 && mkdir $tmp)
+} ||
+{
+   echo "$me: cannot create a temporary directory in $TMPDIR" >&2
+   { (exit 1); exit 1; }
+}
+  _max=0
+  _count=0
+  # Add /usr/xpg4/bin/sed as it is typically found on Solaris
+  # along with /bin/sed that truncates output.
+  for _sed in $_sed_list /usr/xpg4/bin/sed; do
+    test ! -f ${_sed} && break
+    cat /dev/null > "$tmp/sed.in"
+    _count=0
+    echo ${ECHO_N-$ac_n} "0123456789${ECHO_C-$ac_c}" >"$tmp/sed.in"
+    # Check for GNU sed and select it if it is found.
+    if "${_sed}" --version 2>&1 < /dev/null | egrep '(GNU)' > /dev/null; then
+      lt_cv_path_SED=${_sed}
+      break
+    fi
+    while true; do
+      cat "$tmp/sed.in" "$tmp/sed.in" >"$tmp/sed.tmp"
+      mv "$tmp/sed.tmp" "$tmp/sed.in"
+      cp "$tmp/sed.in" "$tmp/sed.nl"
+      echo >>"$tmp/sed.nl"
+      ${_sed} -e 's/a$//' < "$tmp/sed.nl" >"$tmp/sed.out" || break
+      cmp -s "$tmp/sed.out" "$tmp/sed.nl" || break
+      # 40000 chars as input seems more than enough
+      test $_count -gt 10 && break
+      _count=`expr $_count + 1`
+      if test $_count -gt $_max; then
+        _max=$_count
+        lt_cv_path_SED=$_sed
+      fi
+    done
+  done
+  rm -rf "$tmp"
+])
+if test "X$SED" != "X"; then
+  lt_cv_path_SED=$SED
+else
+  SED=$lt_cv_path_SED
+fi
+AC_MSG_RESULT([$SED])
+])
+
diff --git a/autogen.sh b/autogen.sh
new file mode 100755
index 0000000..e7f1dfe
--- /dev/null
+++ b/autogen.sh
@@ -0,0 +1,5 @@
+#! /bin/sh
+# a quick hack script to generate necessary files from 
+# auto* tools.
+
+libtoolize -c -f && aclocal && autoheader && automake --foreign -a -c && autoconf
diff --git a/config.guess b/config.guess
new file mode 100755
index 0000000..9b1384b
--- /dev/null
+++ b/config.guess
@@ -0,0 +1,1400 @@
+#! /bin/sh
+# Attempt to guess a canonical system name.
+#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+#   2000, 2001, 2002 Free Software Foundation, Inc.
+
+timestamp='2002-11-30'
+
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Originally written by Per Bothner <per@bothner.com>.
+# Please send patches to <config-patches@gnu.org>.  Submit a context
+# diff and a properly formatted ChangeLog entry.
+#
+# This script attempts to guess a canonical system name similar to
+# config.sub.  If it succeeds, it prints the system name on stdout, and
+# exits with 0.  Otherwise, it exits with 1.
+#
+# The plan is that this can be called by configure scripts if you
+# don't specify an explicit build system type.
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION]
+
+Output the configuration name of the system \`$me' is run on.
+
+Operation modes:
+  -h, --help         print this help, then exit
+  -t, --time-stamp   print date of last modification, then exit
+  -v, --version      print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.guess ($timestamp)
+
+Originally written by Per Bothner.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+  case $1 in
+    --time-stamp | --time* | -t )
+       echo "$timestamp" ; exit 0 ;;
+    --version | -v )
+       echo "$version" ; exit 0 ;;
+    --help | --h* | -h )
+       echo "$usage"; exit 0 ;;
+    -- )     # Stop option processing
+       shift; break ;;
+    - )	# Use stdin as input.
+       break ;;
+    -* )
+       echo "$me: invalid option $1$help" >&2
+       exit 1 ;;
+    * )
+       break ;;
+  esac
+done
+
+if test $# != 0; then
+  echo "$me: too many arguments$help" >&2
+  exit 1
+fi
+
+trap 'exit 1' 1 2 15
+
+# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
+# compiler to aid in system detection is discouraged as it requires
+# temporary files to be created and, as you can see below, it is a
+# headache to deal with in a portable fashion.
+
+# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
+# use `HOST_CC' if defined, but it is deprecated.
+
+# This shell variable is my proudest work .. or something. --bje
+
+set_cc_for_build='tmpdir=${TMPDIR-/tmp}/config-guess-$$ ;
+(old=`umask` && umask 077 && mkdir $tmpdir && umask $old && unset old)
+   || (echo "$me: cannot create $tmpdir" >&2 && exit 1) ;
+dummy=$tmpdir/dummy ;
+files="$dummy.c $dummy.o $dummy.rel $dummy" ;
+trap '"'"'rm -f $files; rmdir $tmpdir; exit 1'"'"' 1 2 15 ;
+case $CC_FOR_BUILD,$HOST_CC,$CC in
+ ,,)    echo "int x;" > $dummy.c ;
+	for c in cc gcc c89 c99 ; do
+	  if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
+	     CC_FOR_BUILD="$c"; break ;
+	  fi ;
+	done ;
+	rm -f $files ;
+	if test x"$CC_FOR_BUILD" = x ; then
+	  CC_FOR_BUILD=no_compiler_found ;
+	fi
+	;;
+ ,,*)   CC_FOR_BUILD=$CC ;;
+ ,*,*)  CC_FOR_BUILD=$HOST_CC ;;
+esac ;
+unset files'
+
+# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
+# (ghazi@noc.rutgers.edu 1994-08-24)
+if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
+	PATH=$PATH:/.attbin ; export PATH
+fi
+
+UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
+UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
+UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
+UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
+
+# Note: order is significant - the case branches are not exclusive.
+
+case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
+    *:NetBSD:*:*)
+	# NetBSD (nbsd) targets should (where applicable) match one or
+	# more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
+	# *-*-netbsdecoff* and *-*-netbsd*.  For targets that recently
+	# switched to ELF, *-*-netbsd* would select the old
+	# object file format.  This provides both forward
+	# compatibility and a consistent mechanism for selecting the
+	# object file format.
+	#
+	# Note: NetBSD doesn't particularly care about the vendor
+	# portion of the name.  We always set it to "unknown".
+	sysctl="sysctl -n hw.machine_arch"
+	UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
+	    /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
+	case "${UNAME_MACHINE_ARCH}" in
+	    armeb) machine=armeb-unknown ;;
+	    arm*) machine=arm-unknown ;;
+	    sh3el) machine=shl-unknown ;;
+	    sh3eb) machine=sh-unknown ;;
+	    *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
+	esac
+	# The Operating System including object format, if it has switched
+	# to ELF recently, or will in the future.
+	case "${UNAME_MACHINE_ARCH}" in
+	    arm*|i386|m68k|ns32k|sh3*|sparc|vax)
+		eval $set_cc_for_build
+		if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
+			| grep __ELF__ >/dev/null
+		then
+		    # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
+		    # Return netbsd for either.  FIX?
+		    os=netbsd
+		else
+		    os=netbsdelf
+		fi
+		;;
+	    *)
+	        os=netbsd
+		;;
+	esac
+	# The OS release
+	# Debian GNU/NetBSD machines have a different userland, and
+	# thus, need a distinct triplet. However, they do not need
+	# kernel version information, so it can be replaced with a
+	# suitable tag, in the style of linux-gnu.
+	case "${UNAME_VERSION}" in
+	    Debian*)
+		release='-gnu'
+		;;
+	    *)
+		release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+		;;
+	esac
+	# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
+	# contains redundant information, the shorter form:
+	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
+	echo "${machine}-${os}${release}"
+	exit 0 ;;
+    amiga:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    arc:OpenBSD:*:*)
+	echo mipsel-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    hp300:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    mac68k:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    macppc:OpenBSD:*:*)
+	echo powerpc-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    mvme68k:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    mvme88k:OpenBSD:*:*)
+	echo m88k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    mvmeppc:OpenBSD:*:*)
+	echo powerpc-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    pmax:OpenBSD:*:*)
+	echo mipsel-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    sgi:OpenBSD:*:*)
+	echo mipseb-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    sun3:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    wgrisc:OpenBSD:*:*)
+	echo mipsel-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    *:OpenBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    alpha:OSF1:*:*)
+	if test $UNAME_RELEASE = "V4.0"; then
+		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
+	fi
+	# A Vn.n version is a released version.
+	# A Tn.n version is a released field test version.
+	# A Xn.n version is an unreleased experimental baselevel.
+	# 1.2 uses "1.2" for uname -r.
+	eval $set_cc_for_build
+	cat <<EOF >$dummy.s
+	.data
+\$Lformat:
+	.byte 37,100,45,37,120,10,0	# "%d-%x\n"
+
+	.text
+	.globl main
+	.align 4
+	.ent main
+main:
+	.frame \$30,16,\$26,0
+	ldgp \$29,0(\$27)
+	.prologue 1
+	.long 0x47e03d80 # implver \$0
+	lda \$2,-1
+	.long 0x47e20c21 # amask \$2,\$1
+	lda \$16,\$Lformat
+	mov \$0,\$17
+	not \$1,\$18
+	jsr \$26,printf
+	ldgp \$29,0(\$26)
+	mov 0,\$16
+	jsr \$26,exit
+	.end main
+EOF
+	$CC_FOR_BUILD -o $dummy $dummy.s 2>/dev/null
+	if test "$?" = 0 ; then
+		case `$dummy` in
+			0-0)
+				UNAME_MACHINE="alpha"
+				;;
+			1-0)
+				UNAME_MACHINE="alphaev5"
+				;;
+			1-1)
+				UNAME_MACHINE="alphaev56"
+				;;
+			1-101)
+				UNAME_MACHINE="alphapca56"
+				;;
+			2-303)
+				UNAME_MACHINE="alphaev6"
+				;;
+			2-307)
+				UNAME_MACHINE="alphaev67"
+				;;
+			2-1307)
+				UNAME_MACHINE="alphaev68"
+				;;
+			3-1307)
+				UNAME_MACHINE="alphaev7"
+				;;
+		esac
+	fi
+	rm -f $dummy.s $dummy && rmdir $tmpdir
+	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+	exit 0 ;;
+    Alpha\ *:Windows_NT*:*)
+	# How do we know it's Interix rather than the generic POSIX subsystem?
+	# Should we change UNAME_MACHINE based on the output of uname instead
+	# of the specific Alpha model?
+	echo alpha-pc-interix
+	exit 0 ;;
+    21064:Windows_NT:50:3)
+	echo alpha-dec-winnt3.5
+	exit 0 ;;
+    Amiga*:UNIX_System_V:4.0:*)
+	echo m68k-unknown-sysv4
+	exit 0;;
+    *:[Aa]miga[Oo][Ss]:*:*)
+	echo ${UNAME_MACHINE}-unknown-amigaos
+	exit 0 ;;
+    *:[Mm]orph[Oo][Ss]:*:*)
+	echo ${UNAME_MACHINE}-unknown-morphos
+	exit 0 ;;
+    *:OS/390:*:*)
+	echo i370-ibm-openedition
+	exit 0 ;;
+    arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
+	echo arm-acorn-riscix${UNAME_RELEASE}
+	exit 0;;
+    SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
+	echo hppa1.1-hitachi-hiuxmpp
+	exit 0;;
+    Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
+	# akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
+	if test "`(/bin/universe) 2>/dev/null`" = att ; then
+		echo pyramid-pyramid-sysv3
+	else
+		echo pyramid-pyramid-bsd
+	fi
+	exit 0 ;;
+    NILE*:*:*:dcosx)
+	echo pyramid-pyramid-svr4
+	exit 0 ;;
+    DRS?6000:UNIX_SV:4.2*:7*)
+	case `/usr/bin/uname -p` in
+	    sparc) echo sparc-icl-nx7 && exit 0 ;;
+	esac ;;
+    sun4H:SunOS:5.*:*)
+	echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit 0 ;;
+    sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
+	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit 0 ;;
+    i86pc:SunOS:5.*:*)
+	echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit 0 ;;
+    sun4*:SunOS:6*:*)
+	# According to config.sub, this is the proper way to canonicalize
+	# SunOS6.  Hard to guess exactly what SunOS6 will be like, but
+	# it's likely to be more like Solaris than SunOS4.
+	echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit 0 ;;
+    sun4*:SunOS:*:*)
+	case "`/usr/bin/arch -k`" in
+	    Series*|S4*)
+		UNAME_RELEASE=`uname -v`
+		;;
+	esac
+	# Japanese Language versions have a version number like `4.1.3-JL'.
+	echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
+	exit 0 ;;
+    sun3*:SunOS:*:*)
+	echo m68k-sun-sunos${UNAME_RELEASE}
+	exit 0 ;;
+    sun*:*:4.2BSD:*)
+	UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
+	test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
+	case "`/bin/arch`" in
+	    sun3)
+		echo m68k-sun-sunos${UNAME_RELEASE}
+		;;
+	    sun4)
+		echo sparc-sun-sunos${UNAME_RELEASE}
+		;;
+	esac
+	exit 0 ;;
+    aushp:SunOS:*:*)
+	echo sparc-auspex-sunos${UNAME_RELEASE}
+	exit 0 ;;
+    # The situation for MiNT is a little confusing.  The machine name
+    # can be virtually everything (everything which is not
+    # "atarist" or "atariste" at least should have a processor
+    # > m68000).  The system name ranges from "MiNT" over "FreeMiNT"
+    # to the lowercase version "mint" (or "freemint").  Finally
+    # the system name "TOS" denotes a system which is actually not
+    # MiNT.  But MiNT is downward compatible to TOS, so this should
+    # be no problem.
+    atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
+        echo m68k-atari-mint${UNAME_RELEASE}
+	exit 0 ;;
+    atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
+	echo m68k-atari-mint${UNAME_RELEASE}
+        exit 0 ;;
+    *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
+        echo m68k-atari-mint${UNAME_RELEASE}
+	exit 0 ;;
+    milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
+        echo m68k-milan-mint${UNAME_RELEASE}
+        exit 0 ;;
+    hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
+        echo m68k-hades-mint${UNAME_RELEASE}
+        exit 0 ;;
+    *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
+        echo m68k-unknown-mint${UNAME_RELEASE}
+        exit 0 ;;
+    powerpc:machten:*:*)
+	echo powerpc-apple-machten${UNAME_RELEASE}
+	exit 0 ;;
+    RISC*:Mach:*:*)
+	echo mips-dec-mach_bsd4.3
+	exit 0 ;;
+    RISC*:ULTRIX:*:*)
+	echo mips-dec-ultrix${UNAME_RELEASE}
+	exit 0 ;;
+    VAX*:ULTRIX*:*:*)
+	echo vax-dec-ultrix${UNAME_RELEASE}
+	exit 0 ;;
+    2020:CLIX:*:* | 2430:CLIX:*:*)
+	echo clipper-intergraph-clix${UNAME_RELEASE}
+	exit 0 ;;
+    mips:*:*:UMIPS | mips:*:*:RISCos)
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+#ifdef __cplusplus
+#include <stdio.h>  /* for printf() prototype */
+	int main (int argc, char *argv[]) {
+#else
+	int main (argc, argv) int argc; char *argv[]; {
+#endif
+	#if defined (host_mips) && defined (MIPSEB)
+	#if defined (SYSTYPE_SYSV)
+	  printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
+	#endif
+	#if defined (SYSTYPE_SVR4)
+	  printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
+	#endif
+	#if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
+	  printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
+	#endif
+	#endif
+	  exit (-1);
+	}
+EOF
+	$CC_FOR_BUILD -o $dummy $dummy.c \
+	  && $dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
+	  && rm -f $dummy.c $dummy && rmdir $tmpdir && exit 0
+	rm -f $dummy.c $dummy && rmdir $tmpdir
+	echo mips-mips-riscos${UNAME_RELEASE}
+	exit 0 ;;
+    Motorola:PowerMAX_OS:*:*)
+	echo powerpc-motorola-powermax
+	exit 0 ;;
+    Motorola:*:4.3:PL8-*)
+	echo powerpc-harris-powermax
+	exit 0 ;;
+    Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
+	echo powerpc-harris-powermax
+	exit 0 ;;
+    Night_Hawk:Power_UNIX:*:*)
+	echo powerpc-harris-powerunix
+	exit 0 ;;
+    m88k:CX/UX:7*:*)
+	echo m88k-harris-cxux7
+	exit 0 ;;
+    m88k:*:4*:R4*)
+	echo m88k-motorola-sysv4
+	exit 0 ;;
+    m88k:*:3*:R3*)
+	echo m88k-motorola-sysv3
+	exit 0 ;;
+    AViiON:dgux:*:*)
+        # DG/UX returns AViiON for all architectures
+        UNAME_PROCESSOR=`/usr/bin/uname -p`
+	if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
+	then
+	    if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
+	       [ ${TARGET_BINARY_INTERFACE}x = x ]
+	    then
+		echo m88k-dg-dgux${UNAME_RELEASE}
+	    else
+		echo m88k-dg-dguxbcs${UNAME_RELEASE}
+	    fi
+	else
+	    echo i586-dg-dgux${UNAME_RELEASE}
+	fi
+ 	exit 0 ;;
+    M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
+	echo m88k-dolphin-sysv3
+	exit 0 ;;
+    M88*:*:R3*:*)
+	# Delta 88k system running SVR3
+	echo m88k-motorola-sysv3
+	exit 0 ;;
+    XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
+	echo m88k-tektronix-sysv3
+	exit 0 ;;
+    Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
+	echo m68k-tektronix-bsd
+	exit 0 ;;
+    *:IRIX*:*:*)
+	echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
+	exit 0 ;;
+    ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
+	echo romp-ibm-aix      # uname -m gives an 8 hex-code CPU id
+	exit 0 ;;              # Note that: echo "'`uname -s`'" gives 'AIX '
+    i*86:AIX:*:*)
+	echo i386-ibm-aix
+	exit 0 ;;
+    ia64:AIX:*:*)
+	if [ -x /usr/bin/oslevel ] ; then
+		IBM_REV=`/usr/bin/oslevel`
+	else
+		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+	fi
+	echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
+	exit 0 ;;
+    *:AIX:2:3)
+	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
+		eval $set_cc_for_build
+		sed 's/^		//' << EOF >$dummy.c
+		#include <sys/systemcfg.h>
+
+		main()
+			{
+			if (!__power_pc())
+				exit(1);
+			puts("powerpc-ibm-aix3.2.5");
+			exit(0);
+			}
+EOF
+		$CC_FOR_BUILD -o $dummy $dummy.c && $dummy && rm -f $dummy.c $dummy && rmdir $tmpdir && exit 0
+		rm -f $dummy.c $dummy && rmdir $tmpdir
+		echo rs6000-ibm-aix3.2.5
+	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
+		echo rs6000-ibm-aix3.2.4
+	else
+		echo rs6000-ibm-aix3.2
+	fi
+	exit 0 ;;
+    *:AIX:*:[45])
+	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
+	if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
+		IBM_ARCH=rs6000
+	else
+		IBM_ARCH=powerpc
+	fi
+	if [ -x /usr/bin/oslevel ] ; then
+		IBM_REV=`/usr/bin/oslevel`
+	else
+		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+	fi
+	echo ${IBM_ARCH}-ibm-aix${IBM_REV}
+	exit 0 ;;
+    *:AIX:*:*)
+	echo rs6000-ibm-aix
+	exit 0 ;;
+    ibmrt:4.4BSD:*|romp-ibm:BSD:*)
+	echo romp-ibm-bsd4.4
+	exit 0 ;;
+    ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC BSD and
+	echo romp-ibm-bsd${UNAME_RELEASE}   # 4.3 with uname added to
+	exit 0 ;;                           # report: romp-ibm BSD 4.3
+    *:BOSX:*:*)
+	echo rs6000-bull-bosx
+	exit 0 ;;
+    DPX/2?00:B.O.S.:*:*)
+	echo m68k-bull-sysv3
+	exit 0 ;;
+    9000/[34]??:4.3bsd:1.*:*)
+	echo m68k-hp-bsd
+	exit 0 ;;
+    hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
+	echo m68k-hp-bsd4.4
+	exit 0 ;;
+    9000/[34678]??:HP-UX:*:*)
+	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+	case "${UNAME_MACHINE}" in
+	    9000/31? )            HP_ARCH=m68000 ;;
+	    9000/[34]?? )         HP_ARCH=m68k ;;
+	    9000/[678][0-9][0-9])
+		if [ -x /usr/bin/getconf ]; then
+		    sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
+                    sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
+                    case "${sc_cpu_version}" in
+                      523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
+                      528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
+                      532)                      # CPU_PA_RISC2_0
+                        case "${sc_kernel_bits}" in
+                          32) HP_ARCH="hppa2.0n" ;;
+                          64) HP_ARCH="hppa2.0w" ;;
+			  '') HP_ARCH="hppa2.0" ;;   # HP-UX 10.20
+                        esac ;;
+                    esac
+		fi
+		if [ "${HP_ARCH}" = "" ]; then
+		    eval $set_cc_for_build
+		    sed 's/^              //' << EOF >$dummy.c
+
+              #define _HPUX_SOURCE
+              #include <stdlib.h>
+              #include <unistd.h>
+
+              int main ()
+              {
+              #if defined(_SC_KERNEL_BITS)
+                  long bits = sysconf(_SC_KERNEL_BITS);
+              #endif
+                  long cpu  = sysconf (_SC_CPU_VERSION);
+
+                  switch (cpu)
+              	{
+              	case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
+              	case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
+              	case CPU_PA_RISC2_0:
+              #if defined(_SC_KERNEL_BITS)
+              	    switch (bits)
+              		{
+              		case 64: puts ("hppa2.0w"); break;
+              		case 32: puts ("hppa2.0n"); break;
+              		default: puts ("hppa2.0"); break;
+              		} break;
+              #else  /* !defined(_SC_KERNEL_BITS) */
+              	    puts ("hppa2.0"); break;
+              #endif
+              	default: puts ("hppa1.0"); break;
+              	}
+                  exit (0);
+              }
+EOF
+		    (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
+		    if test -z "$HP_ARCH"; then HP_ARCH=hppa; fi
+		    rm -f $dummy.c $dummy && rmdir $tmpdir
+		fi ;;
+	esac
+	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
+	exit 0 ;;
+    ia64:HP-UX:*:*)
+	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+	echo ia64-hp-hpux${HPUX_REV}
+	exit 0 ;;
+    3050*:HI-UX:*:*)
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#include <unistd.h>
+	int
+	main ()
+	{
+	  long cpu = sysconf (_SC_CPU_VERSION);
+	  /* The order matters, because CPU_IS_HP_MC68K erroneously returns
+	     true for CPU_PA_RISC1_0.  CPU_IS_PA_RISC returns correct
+	     results, however.  */
+	  if (CPU_IS_PA_RISC (cpu))
+	    {
+	      switch (cpu)
+		{
+		  case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
+		  case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
+		  case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
+		  default: puts ("hppa-hitachi-hiuxwe2"); break;
+		}
+	    }
+	  else if (CPU_IS_HP_MC68K (cpu))
+	    puts ("m68k-hitachi-hiuxwe2");
+	  else puts ("unknown-hitachi-hiuxwe2");
+	  exit (0);
+	}
+EOF
+	$CC_FOR_BUILD -o $dummy $dummy.c && $dummy && rm -f $dummy.c $dummy && rmdir $tmpdir && exit 0
+	rm -f $dummy.c $dummy && rmdir $tmpdir
+	echo unknown-hitachi-hiuxwe2
+	exit 0 ;;
+    9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
+	echo hppa1.1-hp-bsd
+	exit 0 ;;
+    9000/8??:4.3bsd:*:*)
+	echo hppa1.0-hp-bsd
+	exit 0 ;;
+    *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
+	echo hppa1.0-hp-mpeix
+	exit 0 ;;
+    hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
+	echo hppa1.1-hp-osf
+	exit 0 ;;
+    hp8??:OSF1:*:*)
+	echo hppa1.0-hp-osf
+	exit 0 ;;
+    i*86:OSF1:*:*)
+	if [ -x /usr/sbin/sysversion ] ; then
+	    echo ${UNAME_MACHINE}-unknown-osf1mk
+	else
+	    echo ${UNAME_MACHINE}-unknown-osf1
+	fi
+	exit 0 ;;
+    parisc*:Lites*:*:*)
+	echo hppa1.1-hp-lites
+	exit 0 ;;
+    C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
+	echo c1-convex-bsd
+        exit 0 ;;
+    C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
+	if getsysinfo -f scalar_acc
+	then echo c32-convex-bsd
+	else echo c2-convex-bsd
+	fi
+        exit 0 ;;
+    C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
+	echo c34-convex-bsd
+        exit 0 ;;
+    C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
+	echo c38-convex-bsd
+        exit 0 ;;
+    C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
+	echo c4-convex-bsd
+        exit 0 ;;
+    CRAY*Y-MP:*:*:*)
+	echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit 0 ;;
+    CRAY*[A-Z]90:*:*:*)
+	echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
+	| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
+	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
+	      -e 's/\.[^.]*$/.X/'
+	exit 0 ;;
+    CRAY*TS:*:*:*)
+	echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit 0 ;;
+    CRAY*T3D:*:*:*)
+	echo alpha-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit 0 ;;
+    CRAY*T3E:*:*:*)
+	echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit 0 ;;
+    CRAY*SV1:*:*:*)
+	echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit 0 ;;
+    F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
+	FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+        FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
+        echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+        exit 0 ;;
+    i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
+	echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
+	exit 0 ;;
+    sparc*:BSD/OS:*:*)
+	echo sparc-unknown-bsdi${UNAME_RELEASE}
+	exit 0 ;;
+    *:BSD/OS:*:*)
+	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
+	exit 0 ;;
+    *:FreeBSD:*:*)
+	# Determine whether the default compiler uses glibc.
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#include <features.h>
+	#if __GLIBC__ >= 2
+	LIBC=gnu
+	#else
+	LIBC=
+	#endif
+EOF
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
+	rm -f $dummy.c && rmdir $tmpdir
+	echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`${LIBC:+-$LIBC}
+	exit 0 ;;
+    i*:CYGWIN*:*)
+	echo ${UNAME_MACHINE}-pc-cygwin
+	exit 0 ;;
+    i*:MINGW*:*)
+	echo ${UNAME_MACHINE}-pc-mingw32
+	exit 0 ;;
+    i*:PW*:*)
+	echo ${UNAME_MACHINE}-pc-pw32
+	exit 0 ;;
+    x86:Interix*:3*)
+	echo i586-pc-interix3
+	exit 0 ;;
+    [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
+	echo i${UNAME_MACHINE}-pc-mks
+	exit 0 ;;
+    i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
+	# How do we know it's Interix rather than the generic POSIX subsystem?
+	# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
+	# UNAME_MACHINE based on the output of uname instead of i386?
+	echo i586-pc-interix
+	exit 0 ;;
+    i*:UWIN*:*)
+	echo ${UNAME_MACHINE}-pc-uwin
+	exit 0 ;;
+    p*:CYGWIN*:*)
+	echo powerpcle-unknown-cygwin
+	exit 0 ;;
+    prep*:SunOS:5.*:*)
+	echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit 0 ;;
+    *:GNU:*:*)
+	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+	exit 0 ;;
+    i*86:Minix:*:*)
+	echo ${UNAME_MACHINE}-pc-minix
+	exit 0 ;;
+    arm*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit 0 ;;
+    ia64:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit 0 ;;
+    m68*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit 0 ;;
+    mips:Linux:*:*)
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#undef CPU
+	#undef mips
+	#undef mipsel
+	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
+	CPU=mipsel
+	#else
+	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
+	CPU=mips
+	#else
+	CPU=
+	#endif
+	#endif
+EOF
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
+	rm -f $dummy.c && rmdir $tmpdir
+	test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0
+	;;
+    mips64:Linux:*:*)
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#undef CPU
+	#undef mips64
+	#undef mips64el
+	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
+	CPU=mips64el
+	#else
+	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
+	CPU=mips64
+	#else
+	CPU=
+	#endif
+	#endif
+EOF
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
+	rm -f $dummy.c && rmdir $tmpdir
+	test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0
+	;;
+    ppc:Linux:*:*)
+	echo powerpc-unknown-linux-gnu
+	exit 0 ;;
+    ppc64:Linux:*:*)
+	echo powerpc64-unknown-linux-gnu
+	exit 0 ;;
+    alpha:Linux:*:*)
+	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
+	  EV5)   UNAME_MACHINE=alphaev5 ;;
+	  EV56)  UNAME_MACHINE=alphaev56 ;;
+	  PCA56) UNAME_MACHINE=alphapca56 ;;
+	  PCA57) UNAME_MACHINE=alphapca56 ;;
+	  EV6)   UNAME_MACHINE=alphaev6 ;;
+	  EV67)  UNAME_MACHINE=alphaev67 ;;
+	  EV68*) UNAME_MACHINE=alphaev68 ;;
+        esac
+	objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
+	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
+	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
+	exit 0 ;;
+    parisc:Linux:*:* | hppa:Linux:*:*)
+	# Look for CPU level
+	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
+	  PA7*) echo hppa1.1-unknown-linux-gnu ;;
+	  PA8*) echo hppa2.0-unknown-linux-gnu ;;
+	  *)    echo hppa-unknown-linux-gnu ;;
+	esac
+	exit 0 ;;
+    parisc64:Linux:*:* | hppa64:Linux:*:*)
+	echo hppa64-unknown-linux-gnu
+	exit 0 ;;
+    s390:Linux:*:* | s390x:Linux:*:*)
+	echo ${UNAME_MACHINE}-ibm-linux
+	exit 0 ;;
+    sh*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit 0 ;;
+    sparc:Linux:*:* | sparc64:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit 0 ;;
+    x86_64:Linux:*:*)
+	echo x86_64-unknown-linux-gnu
+	exit 0 ;;
+    i*86:Linux:*:*)
+	# The BFD linker knows what the default object file format is, so
+	# first see if it will tell us. cd to the root directory to prevent
+	# problems with other programs or directories called `ld' in the path.
+	# Set LC_ALL=C to ensure ld outputs messages in English.
+	ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \
+			 | sed -ne '/supported targets:/!d
+				    s/[ 	][ 	]*/ /g
+				    s/.*supported targets: *//
+				    s/ .*//
+				    p'`
+        case "$ld_supported_targets" in
+	  elf32-i386)
+		TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
+		;;
+	  a.out-i386-linux)
+		echo "${UNAME_MACHINE}-pc-linux-gnuaout"
+		exit 0 ;;
+	  coff-i386)
+		echo "${UNAME_MACHINE}-pc-linux-gnucoff"
+		exit 0 ;;
+	  "")
+		# Either a pre-BFD a.out linker (linux-gnuoldld) or
+		# one that does not give us useful --help.
+		echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
+		exit 0 ;;
+	esac
+	# Determine whether the default compiler is a.out or elf
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#include <features.h>
+	#ifdef __ELF__
+	# ifdef __GLIBC__
+	#  if __GLIBC__ >= 2
+	LIBC=gnu
+	#  else
+	LIBC=gnulibc1
+	#  endif
+	# else
+	LIBC=gnulibc1
+	# endif
+	#else
+	#ifdef __INTEL_COMPILER
+	LIBC=gnu
+	#else
+	LIBC=gnuaout
+	#endif
+	#endif
+EOF
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
+	rm -f $dummy.c && rmdir $tmpdir
+	test x"${LIBC}" != x && echo "${UNAME_MACHINE}-pc-linux-${LIBC}" && exit 0
+	test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0
+	;;
+    i*86:DYNIX/ptx:4*:*)
+	# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
+	# earlier versions are messed up and put the nodename in both
+	# sysname and nodename.
+	echo i386-sequent-sysv4
+	exit 0 ;;
+    i*86:UNIX_SV:4.2MP:2.*)
+        # Unixware is an offshoot of SVR4, but it has its own version
+        # number series starting with 2...
+        # I am not positive that other SVR4 systems won't match this,
+	# I just have to hope.  -- rms.
+        # Use sysv4.2uw... so that sysv4* matches it.
+	echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
+	exit 0 ;;
+    i*86:OS/2:*:*)
+	# If we were able to find `uname', then EMX Unix compatibility
+	# is probably installed.
+	echo ${UNAME_MACHINE}-pc-os2-emx
+	exit 0 ;;
+    i*86:XTS-300:*:STOP)
+	echo ${UNAME_MACHINE}-unknown-stop
+	exit 0 ;;
+    i*86:atheos:*:*)
+	echo ${UNAME_MACHINE}-unknown-atheos
+	exit 0 ;;
+    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
+	echo i386-unknown-lynxos${UNAME_RELEASE}
+	exit 0 ;;
+    i*86:*DOS:*:*)
+	echo ${UNAME_MACHINE}-pc-msdosdjgpp
+	exit 0 ;;
+    i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
+	UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
+	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
+		echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
+	else
+		echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
+	fi
+	exit 0 ;;
+    i*86:*:5:[78]*)
+	case `/bin/uname -X | grep "^Machine"` in
+	    *486*)	     UNAME_MACHINE=i486 ;;
+	    *Pentium)	     UNAME_MACHINE=i586 ;;
+	    *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
+	esac
+	echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
+	exit 0 ;;
+    i*86:*:3.2:*)
+	if test -f /usr/options/cb.name; then
+		UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
+		echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
+	elif /bin/uname -X 2>/dev/null >/dev/null ; then
+		UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
+		(/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
+		(/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
+			&& UNAME_MACHINE=i586
+		(/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
+			&& UNAME_MACHINE=i686
+		(/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
+			&& UNAME_MACHINE=i686
+		echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
+	else
+		echo ${UNAME_MACHINE}-pc-sysv32
+	fi
+	exit 0 ;;
+    pc:*:*:*)
+	# Left here for compatibility:
+        # uname -m prints for DJGPP always 'pc', but it prints nothing about
+        # the processor, so we play safe by assuming i386.
+	echo i386-pc-msdosdjgpp
+        exit 0 ;;
+    Intel:Mach:3*:*)
+	echo i386-pc-mach3
+	exit 0 ;;
+    paragon:*:*:*)
+	echo i860-intel-osf1
+	exit 0 ;;
+    i860:*:4.*:*) # i860-SVR4
+	if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
+	  echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
+	else # Add other i860-SVR4 vendors below as they are discovered.
+	  echo i860-unknown-sysv${UNAME_RELEASE}  # Unknown i860-SVR4
+	fi
+	exit 0 ;;
+    mini*:CTIX:SYS*5:*)
+	# "miniframe"
+	echo m68010-convergent-sysv
+	exit 0 ;;
+    mc68k:UNIX:SYSTEM5:3.51m)
+	echo m68k-convergent-sysv
+	exit 0 ;;
+    M680?0:D-NIX:5.3:*)
+	echo m68k-diab-dnix
+	exit 0 ;;
+    M68*:*:R3V[567]*:*)
+	test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
+    3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0)
+	OS_REL=''
+	test -r /etc/.relid \
+	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	  && echo i486-ncr-sysv4.3${OS_REL} && exit 0
+	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+	  && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;;
+    3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
+        /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+          && echo i486-ncr-sysv4 && exit 0 ;;
+    m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
+	echo m68k-unknown-lynxos${UNAME_RELEASE}
+	exit 0 ;;
+    mc68030:UNIX_System_V:4.*:*)
+	echo m68k-atari-sysv4
+	exit 0 ;;
+    TSUNAMI:LynxOS:2.*:*)
+	echo sparc-unknown-lynxos${UNAME_RELEASE}
+	exit 0 ;;
+    rs6000:LynxOS:2.*:*)
+	echo rs6000-unknown-lynxos${UNAME_RELEASE}
+	exit 0 ;;
+    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*)
+	echo powerpc-unknown-lynxos${UNAME_RELEASE}
+	exit 0 ;;
+    SM[BE]S:UNIX_SV:*:*)
+	echo mips-dde-sysv${UNAME_RELEASE}
+	exit 0 ;;
+    RM*:ReliantUNIX-*:*:*)
+	echo mips-sni-sysv4
+	exit 0 ;;
+    RM*:SINIX-*:*:*)
+	echo mips-sni-sysv4
+	exit 0 ;;
+    *:SINIX-*:*:*)
+	if uname -p 2>/dev/null >/dev/null ; then
+		UNAME_MACHINE=`(uname -p) 2>/dev/null`
+		echo ${UNAME_MACHINE}-sni-sysv4
+	else
+		echo ns32k-sni-sysv
+	fi
+	exit 0 ;;
+    PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+                      # says <Richard.M.Bartel@ccMail.Census.GOV>
+        echo i586-unisys-sysv4
+        exit 0 ;;
+    *:UNIX_System_V:4*:FTX*)
+	# From Gerald Hewes <hewes@openmarket.com>.
+	# How about differentiating between stratus architectures? -djm
+	echo hppa1.1-stratus-sysv4
+	exit 0 ;;
+    *:*:*:FTX*)
+	# From seanf@swdc.stratus.com.
+	echo i860-stratus-sysv4
+	exit 0 ;;
+    *:VOS:*:*)
+	# From Paul.Green@stratus.com.
+	echo hppa1.1-stratus-vos
+	exit 0 ;;
+    mc68*:A/UX:*:*)
+	echo m68k-apple-aux${UNAME_RELEASE}
+	exit 0 ;;
+    news*:NEWS-OS:6*:*)
+	echo mips-sony-newsos6
+	exit 0 ;;
+    R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
+	if [ -d /usr/nec ]; then
+	        echo mips-nec-sysv${UNAME_RELEASE}
+	else
+	        echo mips-unknown-sysv${UNAME_RELEASE}
+	fi
+        exit 0 ;;
+    BeBox:BeOS:*:*)	# BeOS running on hardware made by Be, PPC only.
+	echo powerpc-be-beos
+	exit 0 ;;
+    BeMac:BeOS:*:*)	# BeOS running on Mac or Mac clone, PPC only.
+	echo powerpc-apple-beos
+	exit 0 ;;
+    BePC:BeOS:*:*)	# BeOS running on Intel PC compatible.
+	echo i586-pc-beos
+	exit 0 ;;
+    SX-4:SUPER-UX:*:*)
+	echo sx4-nec-superux${UNAME_RELEASE}
+	exit 0 ;;
+    SX-5:SUPER-UX:*:*)
+	echo sx5-nec-superux${UNAME_RELEASE}
+	exit 0 ;;
+    SX-6:SUPER-UX:*:*)
+	echo sx6-nec-superux${UNAME_RELEASE}
+	exit 0 ;;
+    Power*:Rhapsody:*:*)
+	echo powerpc-apple-rhapsody${UNAME_RELEASE}
+	exit 0 ;;
+    *:Rhapsody:*:*)
+	echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
+	exit 0 ;;
+    *:Darwin:*:*)
+	echo `uname -p`-apple-darwin${UNAME_RELEASE}
+	exit 0 ;;
+    *:procnto*:*:* | *:QNX:[0123456789]*:*)
+	UNAME_PROCESSOR=`uname -p`
+	if test "$UNAME_PROCESSOR" = "x86"; then
+		UNAME_PROCESSOR=i386
+		UNAME_MACHINE=pc
+	fi
+	echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
+	exit 0 ;;
+    *:QNX:*:4*)
+	echo i386-pc-qnx
+	exit 0 ;;
+    NSR-[DGKLNPTVW]:NONSTOP_KERNEL:*:*)
+	echo nsr-tandem-nsk${UNAME_RELEASE}
+	exit 0 ;;
+    *:NonStop-UX:*:*)
+	echo mips-compaq-nonstopux
+	exit 0 ;;
+    BS2000:POSIX*:*:*)
+	echo bs2000-siemens-sysv
+	exit 0 ;;
+    DS/*:UNIX_System_V:*:*)
+	echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
+	exit 0 ;;
+    *:Plan9:*:*)
+	# "uname -m" is not consistent, so use $cputype instead. 386
+	# is converted to i386 for consistency with other x86
+	# operating systems.
+	if test "$cputype" = "386"; then
+	    UNAME_MACHINE=i386
+	else
+	    UNAME_MACHINE="$cputype"
+	fi
+	echo ${UNAME_MACHINE}-unknown-plan9
+	exit 0 ;;
+    *:TOPS-10:*:*)
+	echo pdp10-unknown-tops10
+	exit 0 ;;
+    *:TENEX:*:*)
+	echo pdp10-unknown-tenex
+	exit 0 ;;
+    KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
+	echo pdp10-dec-tops20
+	exit 0 ;;
+    XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
+	echo pdp10-xkl-tops20
+	exit 0 ;;
+    *:TOPS-20:*:*)
+	echo pdp10-unknown-tops20
+	exit 0 ;;
+    *:ITS:*:*)
+	echo pdp10-unknown-its
+	exit 0 ;;
+esac
+
+#echo '(No uname command or uname output not recognized.)' 1>&2
+#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
+
+eval $set_cc_for_build
+cat >$dummy.c <<EOF
+#ifdef _SEQUENT_
+# include <sys/types.h>
+# include <sys/utsname.h>
+#endif
+main ()
+{
+#if defined (sony)
+#if defined (MIPSEB)
+  /* BFD wants "bsd" instead of "newsos".  Perhaps BFD should be changed,
+     I don't know....  */
+  printf ("mips-sony-bsd\n"); exit (0);
+#else
+#include <sys/param.h>
+  printf ("m68k-sony-newsos%s\n",
+#ifdef NEWSOS4
+          "4"
+#else
+	  ""
+#endif
+         ); exit (0);
+#endif
+#endif
+
+#if defined (__arm) && defined (__acorn) && defined (__unix)
+  printf ("arm-acorn-riscix"); exit (0);
+#endif
+
+#if defined (hp300) && !defined (hpux)
+  printf ("m68k-hp-bsd\n"); exit (0);
+#endif
+
+#if defined (NeXT)
+#if !defined (__ARCHITECTURE__)
+#define __ARCHITECTURE__ "m68k"
+#endif
+  int version;
+  version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
+  if (version < 4)
+    printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
+  else
+    printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
+  exit (0);
+#endif
+
+#if defined (MULTIMAX) || defined (n16)
+#if defined (UMAXV)
+  printf ("ns32k-encore-sysv\n"); exit (0);
+#else
+#if defined (CMU)
+  printf ("ns32k-encore-mach\n"); exit (0);
+#else
+  printf ("ns32k-encore-bsd\n"); exit (0);
+#endif
+#endif
+#endif
+
+#if defined (__386BSD__)
+  printf ("i386-pc-bsd\n"); exit (0);
+#endif
+
+#if defined (sequent)
+#if defined (i386)
+  printf ("i386-sequent-dynix\n"); exit (0);
+#endif
+#if defined (ns32000)
+  printf ("ns32k-sequent-dynix\n"); exit (0);
+#endif
+#endif
+
+#if defined (_SEQUENT_)
+    struct utsname un;
+
+    uname(&un);
+
+    if (strncmp(un.version, "V2", 2) == 0) {
+	printf ("i386-sequent-ptx2\n"); exit (0);
+    }
+    if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
+	printf ("i386-sequent-ptx1\n"); exit (0);
+    }
+    printf ("i386-sequent-ptx\n"); exit (0);
+
+#endif
+
+#if defined (vax)
+# if !defined (ultrix)
+#  include <sys/param.h>
+#  if defined (BSD)
+#   if BSD == 43
+      printf ("vax-dec-bsd4.3\n"); exit (0);
+#   else
+#    if BSD == 199006
+      printf ("vax-dec-bsd4.3reno\n"); exit (0);
+#    else
+      printf ("vax-dec-bsd\n"); exit (0);
+#    endif
+#   endif
+#  else
+    printf ("vax-dec-bsd\n"); exit (0);
+#  endif
+# else
+    printf ("vax-dec-ultrix\n"); exit (0);
+# endif
+#endif
+
+#if defined (alliant) && defined (i860)
+  printf ("i860-alliant-bsd\n"); exit (0);
+#endif
+
+  exit (1);
+}
+EOF
+
+$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && $dummy && rm -f $dummy.c $dummy && rmdir $tmpdir && exit 0
+rm -f $dummy.c $dummy && rmdir $tmpdir
+
+# Apollos put the system type in the environment.
+
+test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; }
+
+# Convex versions that predate uname can use getsysinfo(1)
+
+if [ -x /usr/convex/getsysinfo ]
+then
+    case `getsysinfo -f cpu_type` in
+    c1*)
+	echo c1-convex-bsd
+	exit 0 ;;
+    c2*)
+	if getsysinfo -f scalar_acc
+	then echo c32-convex-bsd
+	else echo c2-convex-bsd
+	fi
+	exit 0 ;;
+    c34*)
+	echo c34-convex-bsd
+	exit 0 ;;
+    c38*)
+	echo c38-convex-bsd
+	exit 0 ;;
+    c4*)
+	echo c4-convex-bsd
+	exit 0 ;;
+    esac
+fi
+
+cat >&2 <<EOF
+$0: unable to guess system type
+
+This script, last modified $timestamp, has failed to recognize
+the operating system you are using. It is advised that you
+download the most up to date version of the config scripts from
+
+    ftp://ftp.gnu.org/pub/gnu/config/
+
+If the version you run ($0) is already up to date, please
+send the following data and any information you think might be
+pertinent to <config-patches@gnu.org> in order to provide the needed
+information to handle your system.
+
+config.guess timestamp = $timestamp
+
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null`
+
+hostinfo               = `(hostinfo) 2>/dev/null`
+/bin/universe          = `(/bin/universe) 2>/dev/null`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null`
+/bin/arch              = `(/bin/arch) 2>/dev/null`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
+
+UNAME_MACHINE = ${UNAME_MACHINE}
+UNAME_RELEASE = ${UNAME_RELEASE}
+UNAME_SYSTEM  = ${UNAME_SYSTEM}
+UNAME_VERSION = ${UNAME_VERSION}
+EOF
+
+exit 1
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
diff --git a/config.h.in b/config.h.in
new file mode 100644
index 0000000..8e82612
--- /dev/null
+++ b/config.h.in
@@ -0,0 +1,92 @@
+/* config.h.in.  Generated from configure.ac by autoheader.  */
+
+/* Define to 1 if you have the <dlfcn.h> header file. */
+#undef HAVE_DLFCN_H
+
+/* Define to 1 if you have the <fcntl.h> header file. */
+#undef HAVE_FCNTL_H
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#undef HAVE_INTTYPES_H
+
+/* Define to 1 if you have the `m' library (-lm). */
+#undef HAVE_LIBM
+
+/* Define to 1 if you have the `z' library (-lz). */
+#undef HAVE_LIBZ
+
+/* Define to 1 if your system has a GNU libc compatible `malloc' function, and
+   to 0 otherwise. */
+#undef HAVE_MALLOC
+
+/* Define to 1 if you have the <malloc.h> header file. */
+#undef HAVE_MALLOC_H
+
+/* Define to 1 if you have the <memory.h> header file. */
+#undef HAVE_MEMORY_H
+
+/* Define to 1 if you have the `memset' function. */
+#undef HAVE_MEMSET
+
+/* Define to 1 if you have the `pow' function. */
+#undef HAVE_POW
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#undef HAVE_STDINT_H
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#undef HAVE_STDLIB_H
+
+/* Define to 1 if you have the <strings.h> header file. */
+#undef HAVE_STRINGS_H
+
+/* Define to 1 if you have the <string.h> header file. */
+#undef HAVE_STRING_H
+
+/* Define to 1 if you have the `strrchr' function. */
+#undef HAVE_STRRCHR
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#undef HAVE_SYS_STAT_H
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#undef HAVE_SYS_TYPES_H
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#undef HAVE_UNISTD_H
+
+/* Name of package */
+#undef PACKAGE
+
+/* Define to the address where bug reports for this package should be sent. */
+#undef PACKAGE_BUGREPORT
+
+/* Define to the full name of this package. */
+#undef PACKAGE_NAME
+
+/* Define to the full name and version of this package. */
+#undef PACKAGE_STRING
+
+/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME
+
+/* Define to the version of this package. */
+#undef PACKAGE_VERSION
+
+/* Define to 1 if you have the ANSI C header files. */
+#undef STDC_HEADERS
+
+/* Define to 1 if your <sys/time.h> declares `struct tm'. */
+#undef TM_IN_SYS_TIME
+
+/* Version number of package */
+#undef VERSION
+
+/* Define to empty if `const' does not conform to ANSI C. */
+#undef const
+
+/* Define to rpl_malloc if the replacement function should be used. */
+#undef malloc
+
+/* Define to `unsigned' if <sys/types.h> does not define. */
+#undef size_t
diff --git a/config.sub b/config.sub
new file mode 100755
index 0000000..f0675aa
--- /dev/null
+++ b/config.sub
@@ -0,0 +1,1469 @@
+#! /bin/sh
+# Configuration validation subroutine script.
+#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+#   2000, 2001, 2002 Free Software Foundation, Inc.
+
+timestamp='2002-11-30'
+
+# This file is (in principle) common to ALL GNU software.
+# The presence of a machine in this file suggests that SOME GNU software
+# can handle that machine.  It does not imply ALL GNU software can.
+#
+# This file is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330,
+# Boston, MA 02111-1307, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Please send patches to <config-patches@gnu.org>.  Submit a context
+# diff and a properly formatted ChangeLog entry.
+#
+# Configuration subroutine to validate and canonicalize a configuration type.
+# Supply the specified configuration type as an argument.
+# If it is invalid, we print an error message on stderr and exit with code 1.
+# Otherwise, we print the canonical config type on stdout and succeed.
+
+# This file is supposed to be the same for all GNU packages
+# and recognize all the CPU types, system types and aliases
+# that are meaningful with *any* GNU software.
+# Each package is responsible for reporting which valid configurations
+# it does not support.  The user should be able to distinguish
+# a failure to support a valid configuration from a meaningless
+# configuration.
+
+# The goal of this file is to map all the various variations of a given
+# machine specification into a single specification in the form:
+#	CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or in some cases, the newer four-part form:
+#	CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# It is wrong to echo any other type of specification.
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION] CPU-MFR-OPSYS
+       $0 [OPTION] ALIAS
+
+Canonicalize a configuration name.
+
+Operation modes:
+  -h, --help         print this help, then exit
+  -t, --time-stamp   print date of last modification, then exit
+  -v, --version      print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.sub ($timestamp)
+
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+  case $1 in
+    --time-stamp | --time* | -t )
+       echo "$timestamp" ; exit 0 ;;
+    --version | -v )
+       echo "$version" ; exit 0 ;;
+    --help | --h* | -h )
+       echo "$usage"; exit 0 ;;
+    -- )     # Stop option processing
+       shift; break ;;
+    - )	# Use stdin as input.
+       break ;;
+    -* )
+       echo "$me: invalid option $1$help"
+       exit 1 ;;
+
+    *local*)
+       # First pass through any local machine types.
+       echo $1
+       exit 0;;
+
+    * )
+       break ;;
+  esac
+done
+
+case $# in
+ 0) echo "$me: missing argument$help" >&2
+    exit 1;;
+ 1) ;;
+ *) echo "$me: too many arguments$help" >&2
+    exit 1;;
+esac
+
+# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
+# Here we must recognize all the valid KERNEL-OS combinations.
+maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
+case $maybe_os in
+  nto-qnx* | linux-gnu* | freebsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*)
+    os=-$maybe_os
+    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
+    ;;
+  *)
+    basic_machine=`echo $1 | sed 's/-[^-]*$//'`
+    if [ $basic_machine != $1 ]
+    then os=`echo $1 | sed 's/.*-/-/'`
+    else os=; fi
+    ;;
+esac
+
+### Let's recognize common machines as not being operating systems so
+### that things like config.sub decstation-3100 work.  We also
+### recognize some manufacturers as not being operating systems, so we
+### can provide default operating systems below.
+case $os in
+	-sun*os*)
+		# Prevent following clause from handling this invalid input.
+		;;
+	-dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
+	-att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
+	-unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
+	-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
+	-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
+	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
+	-apple | -axis)
+		os=
+		basic_machine=$1
+		;;
+	-sim | -cisco | -oki | -wec | -winbond)
+		os=
+		basic_machine=$1
+		;;
+	-scout)
+		;;
+	-wrs)
+		os=-vxworks
+		basic_machine=$1
+		;;
+	-chorusos*)
+		os=-chorusos
+		basic_machine=$1
+		;;
+ 	-chorusrdb)
+ 		os=-chorusrdb
+		basic_machine=$1
+ 		;;
+	-hiux*)
+		os=-hiuxwe2
+		;;
+	-sco5)
+		os=-sco3.2v5
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco4)
+		os=-sco3.2v4
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco3.2.[4-9]*)
+		os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco3.2v[4-9]*)
+		# Don't forget version if it is 3.2v4 or newer.
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco*)
+		os=-sco3.2v2
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-udk*)
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-isc)
+		os=-isc2.2
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-clix*)
+		basic_machine=clipper-intergraph
+		;;
+	-isc*)
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-lynx*)
+		os=-lynxos
+		;;
+	-ptx*)
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
+		;;
+	-windowsnt*)
+		os=`echo $os | sed -e 's/windowsnt/winnt/'`
+		;;
+	-psos*)
+		os=-psos
+		;;
+	-mint | -mint[0-9]*)
+		basic_machine=m68k-atari
+		os=-mint
+		;;
+esac
+
+# Decode aliases for certain CPU-COMPANY combinations.
+case $basic_machine in
+	# Recognize the basic CPU types without company name.
+	# Some are omitted here because they have special meanings below.
+	1750a | 580 \
+	| a29k \
+	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
+	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
+	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
+	| clipper \
+	| d10v | d30v | dlx | dsp16xx \
+	| fr30 | frv \
+	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
+	| i370 | i860 | i960 | ia64 \
+	| ip2k \
+	| m32r | m68000 | m68k | m88k | mcore \
+	| mips | mipsbe | mipseb | mipsel | mipsle \
+	| mips16 \
+	| mips64 | mips64el \
+	| mips64vr | mips64vrel \
+	| mips64orion | mips64orionel \
+	| mips64vr4100 | mips64vr4100el \
+	| mips64vr4300 | mips64vr4300el \
+	| mips64vr5000 | mips64vr5000el \
+	| mipsisa32 | mipsisa32el \
+	| mipsisa64 | mipsisa64el \
+	| mipsisa64sb1 | mipsisa64sb1el \
+	| mipsisa64sr71k | mipsisa64sr71kel \
+	| mipstx39 | mipstx39el \
+	| mn10200 | mn10300 \
+	| ns16k | ns32k \
+	| openrisc | or32 \
+	| pdp10 | pdp11 | pj | pjl \
+	| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
+	| pyramid \
+	| sh | sh[1234] | sh3e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \
+	| sh64 | sh64le \
+	| sparc | sparc64 | sparc86x | sparclet | sparclite | sparcv9 | sparcv9b \
+	| strongarm \
+	| tahoe | thumb | tic80 | tron \
+	| v850 | v850e \
+	| we32k \
+	| x86 | xscale | xstormy16 | xtensa \
+	| z8k)
+		basic_machine=$basic_machine-unknown
+		;;
+	m6811 | m68hc11 | m6812 | m68hc12)
+		# Motorola 68HC11/12.
+		basic_machine=$basic_machine-unknown
+		os=-none
+		;;
+	m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
+		;;
+
+	# We use `pc' rather than `unknown'
+	# because (1) that's what they normally are, and
+	# (2) the word "unknown" tends to confuse beginning users.
+	i*86 | x86_64)
+	  basic_machine=$basic_machine-pc
+	  ;;
+	# Object if more than one company name word.
+	*-*-*)
+		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+		exit 1
+		;;
+	# Recognize the basic CPU types with company name.
+	580-* \
+	| a29k-* \
+	| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
+	| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
+	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
+	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
+	| avr-* \
+	| bs2000-* \
+	| c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* \
+	| clipper-* | cydra-* \
+	| d10v-* | d30v-* | dlx-* \
+	| elxsi-* \
+	| f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \
+	| h8300-* | h8500-* \
+	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
+	| i*86-* | i860-* | i960-* | ia64-* \
+	| ip2k-* \
+	| m32r-* \
+	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
+	| m88110-* | m88k-* | mcore-* \
+	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
+	| mips16-* \
+	| mips64-* | mips64el-* \
+	| mips64vr-* | mips64vrel-* \
+	| mips64orion-* | mips64orionel-* \
+	| mips64vr4100-* | mips64vr4100el-* \
+	| mips64vr4300-* | mips64vr4300el-* \
+	| mips64vr5000-* | mips64vr5000el-* \
+	| mipsisa32-* | mipsisa32el-* \
+	| mipsisa64-* | mipsisa64el-* \
+	| mipsisa64sb1-* | mipsisa64sb1el-* \
+	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
+	| mipstx39 | mipstx39el \
+	| none-* | np1-* | ns16k-* | ns32k-* \
+	| orion-* \
+	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
+	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
+	| pyramid-* \
+	| romp-* | rs6000-* \
+	| sh-* | sh[1234]-* | sh3e-* | sh[34]eb-* | shbe-* \
+	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
+	| sparc-* | sparc64-* | sparc86x-* | sparclet-* | sparclite-* \
+	| sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \
+	| tahoe-* | thumb-* | tic30-* | tic4x-* | tic54x-* | tic80-* | tron-* \
+	| v850-* | v850e-* | vax-* \
+	| we32k-* \
+	| x86-* | x86_64-* | xps100-* | xscale-* | xstormy16-* \
+	| xtensa-* \
+	| ymp-* \
+	| z8k-*)
+		;;
+	# Recognize the various machine names and aliases which stand
+	# for a CPU type and a company and sometimes even an OS.
+	386bsd)
+		basic_machine=i386-unknown
+		os=-bsd
+		;;
+	3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
+		basic_machine=m68000-att
+		;;
+	3b*)
+		basic_machine=we32k-att
+		;;
+	a29khif)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+	adobe68k)
+		basic_machine=m68010-adobe
+		os=-scout
+		;;
+	alliant | fx80)
+		basic_machine=fx80-alliant
+		;;
+	altos | altos3068)
+		basic_machine=m68k-altos
+		;;
+	am29k)
+		basic_machine=a29k-none
+		os=-bsd
+		;;
+	amdahl)
+		basic_machine=580-amdahl
+		os=-sysv
+		;;
+	amiga | amiga-*)
+		basic_machine=m68k-unknown
+		;;
+	amigaos | amigados)
+		basic_machine=m68k-unknown
+		os=-amigaos
+		;;
+	amigaunix | amix)
+		basic_machine=m68k-unknown
+		os=-sysv4
+		;;
+	apollo68)
+		basic_machine=m68k-apollo
+		os=-sysv
+		;;
+	apollo68bsd)
+		basic_machine=m68k-apollo
+		os=-bsd
+		;;
+	aux)
+		basic_machine=m68k-apple
+		os=-aux
+		;;
+	balance)
+		basic_machine=ns32k-sequent
+		os=-dynix
+		;;
+	c90)
+		basic_machine=c90-cray
+		os=-unicos
+		;;
+	convex-c1)
+		basic_machine=c1-convex
+		os=-bsd
+		;;
+	convex-c2)
+		basic_machine=c2-convex
+		os=-bsd
+		;;
+	convex-c32)
+		basic_machine=c32-convex
+		os=-bsd
+		;;
+	convex-c34)
+		basic_machine=c34-convex
+		os=-bsd
+		;;
+	convex-c38)
+		basic_machine=c38-convex
+		os=-bsd
+		;;
+	cray | j90)
+		basic_machine=j90-cray
+		os=-unicos
+		;;
+	crds | unos)
+		basic_machine=m68k-crds
+		;;
+	cris | cris-* | etrax*)
+		basic_machine=cris-axis
+		;;
+	da30 | da30-*)
+		basic_machine=m68k-da30
+		;;
+	decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
+		basic_machine=mips-dec
+		;;
+	decsystem10* | dec10*)
+		basic_machine=pdp10-dec
+		os=-tops10
+		;;
+	decsystem20* | dec20*)
+		basic_machine=pdp10-dec
+		os=-tops20
+		;;
+	delta | 3300 | motorola-3300 | motorola-delta \
+	      | 3300-motorola | delta-motorola)
+		basic_machine=m68k-motorola
+		;;
+	delta88)
+		basic_machine=m88k-motorola
+		os=-sysv3
+		;;
+	dpx20 | dpx20-*)
+		basic_machine=rs6000-bull
+		os=-bosx
+		;;
+	dpx2* | dpx2*-bull)
+		basic_machine=m68k-bull
+		os=-sysv3
+		;;
+	ebmon29k)
+		basic_machine=a29k-amd
+		os=-ebmon
+		;;
+	elxsi)
+		basic_machine=elxsi-elxsi
+		os=-bsd
+		;;
+	encore | umax | mmax)
+		basic_machine=ns32k-encore
+		;;
+	es1800 | OSE68k | ose68k | ose | OSE)
+		basic_machine=m68k-ericsson
+		os=-ose
+		;;
+	fx2800)
+		basic_machine=i860-alliant
+		;;
+	genix)
+		basic_machine=ns32k-ns
+		;;
+	gmicro)
+		basic_machine=tron-gmicro
+		os=-sysv
+		;;
+	go32)
+		basic_machine=i386-pc
+		os=-go32
+		;;
+	h3050r* | hiux*)
+		basic_machine=hppa1.1-hitachi
+		os=-hiuxwe2
+		;;
+	h8300hms)
+		basic_machine=h8300-hitachi
+		os=-hms
+		;;
+	h8300xray)
+		basic_machine=h8300-hitachi
+		os=-xray
+		;;
+	h8500hms)
+		basic_machine=h8500-hitachi
+		os=-hms
+		;;
+	harris)
+		basic_machine=m88k-harris
+		os=-sysv3
+		;;
+	hp300-*)
+		basic_machine=m68k-hp
+		;;
+	hp300bsd)
+		basic_machine=m68k-hp
+		os=-bsd
+		;;
+	hp300hpux)
+		basic_machine=m68k-hp
+		os=-hpux
+		;;
+	hp3k9[0-9][0-9] | hp9[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hp9k2[0-9][0-9] | hp9k31[0-9])
+		basic_machine=m68000-hp
+		;;
+	hp9k3[2-9][0-9])
+		basic_machine=m68k-hp
+		;;
+	hp9k6[0-9][0-9] | hp6[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hp9k7[0-79][0-9] | hp7[0-79][0-9])
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k78[0-9] | hp78[0-9])
+		# FIXME: really hppa2.0-hp
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
+		# FIXME: really hppa2.0-hp
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[0-9][13679] | hp8[0-9][13679])
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[0-9][0-9] | hp8[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hppa-next)
+		os=-nextstep3
+		;;
+	hppaosf)
+		basic_machine=hppa1.1-hp
+		os=-osf
+		;;
+	hppro)
+		basic_machine=hppa1.1-hp
+		os=-proelf
+		;;
+	i370-ibm* | ibm*)
+		basic_machine=i370-ibm
+		;;
+# I'm not sure what "Sysv32" means.  Should this be sysv3.2?
+	i*86v32)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-sysv32
+		;;
+	i*86v4*)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-sysv4
+		;;
+	i*86v)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-sysv
+		;;
+	i*86sol2)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-solaris2
+		;;
+	i386mach)
+		basic_machine=i386-mach
+		os=-mach
+		;;
+	i386-vsta | vsta)
+		basic_machine=i386-unknown
+		os=-vsta
+		;;
+	iris | iris4d)
+		basic_machine=mips-sgi
+		case $os in
+		    -irix*)
+			;;
+		    *)
+			os=-irix4
+			;;
+		esac
+		;;
+	isi68 | isi)
+		basic_machine=m68k-isi
+		os=-sysv
+		;;
+	m88k-omron*)
+		basic_machine=m88k-omron
+		;;
+	magnum | m3230)
+		basic_machine=mips-mips
+		os=-sysv
+		;;
+	merlin)
+		basic_machine=ns32k-utek
+		os=-sysv
+		;;
+	mingw32)
+		basic_machine=i386-pc
+		os=-mingw32
+		;;
+	miniframe)
+		basic_machine=m68000-convergent
+		;;
+	*mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
+		basic_machine=m68k-atari
+		os=-mint
+		;;
+	mips3*-*)
+		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
+		;;
+	mips3*)
+		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
+		;;
+	mmix*)
+		basic_machine=mmix-knuth
+		os=-mmixware
+		;;
+	monitor)
+		basic_machine=m68k-rom68k
+		os=-coff
+		;;
+	morphos)
+		basic_machine=powerpc-unknown
+		os=-morphos
+		;;
+	msdos)
+		basic_machine=i386-pc
+		os=-msdos
+		;;
+	mvs)
+		basic_machine=i370-ibm
+		os=-mvs
+		;;
+	ncr3000)
+		basic_machine=i486-ncr
+		os=-sysv4
+		;;
+	netbsd386)
+		basic_machine=i386-unknown
+		os=-netbsd
+		;;
+	netwinder)
+		basic_machine=armv4l-rebel
+		os=-linux
+		;;
+	news | news700 | news800 | news900)
+		basic_machine=m68k-sony
+		os=-newsos
+		;;
+	news1000)
+		basic_machine=m68030-sony
+		os=-newsos
+		;;
+	news-3600 | risc-news)
+		basic_machine=mips-sony
+		os=-newsos
+		;;
+	necv70)
+		basic_machine=v70-nec
+		os=-sysv
+		;;
+	next | m*-next )
+		basic_machine=m68k-next
+		case $os in
+		    -nextstep* )
+			;;
+		    -ns2*)
+		      os=-nextstep2
+			;;
+		    *)
+		      os=-nextstep3
+			;;
+		esac
+		;;
+	nh3000)
+		basic_machine=m68k-harris
+		os=-cxux
+		;;
+	nh[45]000)
+		basic_machine=m88k-harris
+		os=-cxux
+		;;
+	nindy960)
+		basic_machine=i960-intel
+		os=-nindy
+		;;
+	mon960)
+		basic_machine=i960-intel
+		os=-mon960
+		;;
+	nonstopux)
+		basic_machine=mips-compaq
+		os=-nonstopux
+		;;
+	np1)
+		basic_machine=np1-gould
+		;;
+	nsr-tandem)
+		basic_machine=nsr-tandem
+		;;
+	op50n-* | op60c-*)
+		basic_machine=hppa1.1-oki
+		os=-proelf
+		;;
+	or32 | or32-*)
+		basic_machine=or32-unknown
+		os=-coff
+		;;
+	OSE68000 | ose68000)
+		basic_machine=m68000-ericsson
+		os=-ose
+		;;
+	os68k)
+		basic_machine=m68k-none
+		os=-os68k
+		;;
+	pa-hitachi)
+		basic_machine=hppa1.1-hitachi
+		os=-hiuxwe2
+		;;
+	paragon)
+		basic_machine=i860-intel
+		os=-osf
+		;;
+	pbd)
+		basic_machine=sparc-tti
+		;;
+	pbb)
+		basic_machine=m68k-tti
+		;;
+	pc532 | pc532-*)
+		basic_machine=ns32k-pc532
+		;;
+	pentium | p5 | k5 | k6 | nexgen | viac3)
+		basic_machine=i586-pc
+		;;
+	pentiumpro | p6 | 6x86 | athlon | athlon_*)
+		basic_machine=i686-pc
+		;;
+	pentiumii | pentium2)
+		basic_machine=i686-pc
+		;;
+	pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
+		basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentiumpro-* | p6-* | 6x86-* | athlon-*)
+		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentiumii-* | pentium2-*)
+		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pn)
+		basic_machine=pn-gould
+		;;
+	power)	basic_machine=power-ibm
+		;;
+	ppc)	basic_machine=powerpc-unknown
+		;;
+	ppc-*)	basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ppcle | powerpclittle | ppc-le | powerpc-little)
+		basic_machine=powerpcle-unknown
+		;;
+	ppcle-* | powerpclittle-*)
+		basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ppc64)	basic_machine=powerpc64-unknown
+		;;
+	ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ppc64le | powerpc64little | ppc64-le | powerpc64-little)
+		basic_machine=powerpc64le-unknown
+		;;
+	ppc64le-* | powerpc64little-*)
+		basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ps2)
+		basic_machine=i386-ibm
+		;;
+	pw32)
+		basic_machine=i586-unknown
+		os=-pw32
+		;;
+	rom68k)
+		basic_machine=m68k-rom68k
+		os=-coff
+		;;
+	rm[46]00)
+		basic_machine=mips-siemens
+		;;
+	rtpc | rtpc-*)
+		basic_machine=romp-ibm
+		;;
+	s390 | s390-*)
+		basic_machine=s390-ibm
+		;;
+	s390x | s390x-*)
+		basic_machine=s390x-ibm
+		;;
+	sa29200)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+	sb1)
+		basic_machine=mipsisa64sb1-unknown
+		;;
+	sb1el)
+		basic_machine=mipsisa64sb1el-unknown
+		;;
+	sequent)
+		basic_machine=i386-sequent
+		;;
+	sh)
+		basic_machine=sh-hitachi
+		os=-hms
+		;;
+	sparclite-wrs | simso-wrs)
+		basic_machine=sparclite-wrs
+		os=-vxworks
+		;;
+	sps7)
+		basic_machine=m68k-bull
+		os=-sysv2
+		;;
+	spur)
+		basic_machine=spur-unknown
+		;;
+	st2000)
+		basic_machine=m68k-tandem
+		;;
+	stratus)
+		basic_machine=i860-stratus
+		os=-sysv4
+		;;
+	sun2)
+		basic_machine=m68000-sun
+		;;
+	sun2os3)
+		basic_machine=m68000-sun
+		os=-sunos3
+		;;
+	sun2os4)
+		basic_machine=m68000-sun
+		os=-sunos4
+		;;
+	sun3os3)
+		basic_machine=m68k-sun
+		os=-sunos3
+		;;
+	sun3os4)
+		basic_machine=m68k-sun
+		os=-sunos4
+		;;
+	sun4os3)
+		basic_machine=sparc-sun
+		os=-sunos3
+		;;
+	sun4os4)
+		basic_machine=sparc-sun
+		os=-sunos4
+		;;
+	sun4sol2)
+		basic_machine=sparc-sun
+		os=-solaris2
+		;;
+	sun3 | sun3-*)
+		basic_machine=m68k-sun
+		;;
+	sun4)
+		basic_machine=sparc-sun
+		;;
+	sun386 | sun386i | roadrunner)
+		basic_machine=i386-sun
+		;;
+	sv1)
+		basic_machine=sv1-cray
+		os=-unicos
+		;;
+	symmetry)
+		basic_machine=i386-sequent
+		os=-dynix
+		;;
+	t3d)
+		basic_machine=alpha-cray
+		os=-unicos
+		;;
+	t3e)
+		basic_machine=alphaev5-cray
+		os=-unicos
+		;;
+	t90)
+		basic_machine=t90-cray
+		os=-unicos
+		;;
+        tic4x | c4x*)
+		basic_machine=tic4x-unknown
+		os=-coff
+		;;
+	tic54x | c54x*)
+		basic_machine=tic54x-unknown
+		os=-coff
+		;;
+	tx39)
+		basic_machine=mipstx39-unknown
+		;;
+	tx39el)
+		basic_machine=mipstx39el-unknown
+		;;
+	toad1)
+		basic_machine=pdp10-xkl
+		os=-tops20
+		;;
+	tower | tower-32)
+		basic_machine=m68k-ncr
+		;;
+	udi29k)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+	ultra3)
+		basic_machine=a29k-nyu
+		os=-sym1
+		;;
+	v810 | necv810)
+		basic_machine=v810-nec
+		os=-none
+		;;
+	vaxv)
+		basic_machine=vax-dec
+		os=-sysv
+		;;
+	vms)
+		basic_machine=vax-dec
+		os=-vms
+		;;
+	vpp*|vx|vx-*)
+		basic_machine=f301-fujitsu
+		;;
+	vxworks960)
+		basic_machine=i960-wrs
+		os=-vxworks
+		;;
+	vxworks68)
+		basic_machine=m68k-wrs
+		os=-vxworks
+		;;
+	vxworks29k)
+		basic_machine=a29k-wrs
+		os=-vxworks
+		;;
+	w65*)
+		basic_machine=w65-wdc
+		os=-none
+		;;
+	w89k-*)
+		basic_machine=hppa1.1-winbond
+		os=-proelf
+		;;
+	xps | xps100)
+		basic_machine=xps100-honeywell
+		;;
+	ymp)
+		basic_machine=ymp-cray
+		os=-unicos
+		;;
+	z8k-*-coff)
+		basic_machine=z8k-unknown
+		os=-sim
+		;;
+	none)
+		basic_machine=none-none
+		os=-none
+		;;
+
+# Here we handle the default manufacturer of certain CPU types.  It is in
+# some cases the only manufacturer, in others, it is the most popular.
+	w89k)
+		basic_machine=hppa1.1-winbond
+		;;
+	op50n)
+		basic_machine=hppa1.1-oki
+		;;
+	op60c)
+		basic_machine=hppa1.1-oki
+		;;
+	romp)
+		basic_machine=romp-ibm
+		;;
+	rs6000)
+		basic_machine=rs6000-ibm
+		;;
+	vax)
+		basic_machine=vax-dec
+		;;
+	pdp10)
+		# there are many clones, so DEC is not a safe bet
+		basic_machine=pdp10-unknown
+		;;
+	pdp11)
+		basic_machine=pdp11-dec
+		;;
+	we32k)
+		basic_machine=we32k-att
+		;;
+	sh3 | sh4 | sh3eb | sh4eb | sh[1234]le | sh3ele)
+		basic_machine=sh-unknown
+		;;
+	sh64)
+		basic_machine=sh64-unknown
+		;;
+	sparc | sparcv9 | sparcv9b)
+		basic_machine=sparc-sun
+		;;
+	cydra)
+		basic_machine=cydra-cydrome
+		;;
+	orion)
+		basic_machine=orion-highlevel
+		;;
+	orion105)
+		basic_machine=clipper-highlevel
+		;;
+	mac | mpw | mac-mpw)
+		basic_machine=m68k-apple
+		;;
+	pmac | pmac-mpw)
+		basic_machine=powerpc-apple
+		;;
+	*-unknown)
+		# Make sure to match an already-canonicalized machine name.
+		;;
+	*)
+		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+		exit 1
+		;;
+esac
+
+# Here we canonicalize certain aliases for manufacturers.
+case $basic_machine in
+	*-digital*)
+		basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
+		;;
+	*-commodore*)
+		basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
+		;;
+	*)
+		;;
+esac
+
+# Decode manufacturer-specific aliases for certain operating systems.
+
+if [ x"$os" != x"" ]
+then
+case $os in
+        # First match some system type aliases
+        # that might get confused with valid system types.
+	# -solaris* is a basic system type, with this one exception.
+	-solaris1 | -solaris1.*)
+		os=`echo $os | sed -e 's|solaris1|sunos4|'`
+		;;
+	-solaris)
+		os=-solaris2
+		;;
+	-svr4*)
+		os=-sysv4
+		;;
+	-unixware*)
+		os=-sysv4.2uw
+		;;
+	-gnu/linux*)
+		os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
+		;;
+	# First accept the basic system types.
+	# The portable systems comes first.
+	# Each alternative MUST END IN A *, to match a version number.
+	# -sysv* is not here because it comes later, after sysvr4.
+	-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
+	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
+	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
+	      | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
+	      | -aos* \
+	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
+	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
+	      | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \
+	      | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
+	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
+	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
+	      | -chorusos* | -chorusrdb* \
+	      | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
+	      | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \
+	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
+	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
+	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
+	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
+	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
+	      | -powermax* | -dnix*)
+	# Remember, each alternative MUST END IN *, to match a version number.
+		;;
+	-qnx*)
+		case $basic_machine in
+		    x86-* | i*86-*)
+			;;
+		    *)
+			os=-nto$os
+			;;
+		esac
+		;;
+	-nto-qnx*)
+		;;
+	-nto*)
+		os=`echo $os | sed -e 's|nto|nto-qnx|'`
+		;;
+	-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
+	      | -windows* | -osx | -abug | -netware* | -os9* | -beos* \
+	      | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
+		;;
+	-mac*)
+		os=`echo $os | sed -e 's|mac|macos|'`
+		;;
+	-linux*)
+		os=`echo $os | sed -e 's|linux|linux-gnu|'`
+		;;
+	-sunos5*)
+		os=`echo $os | sed -e 's|sunos5|solaris2|'`
+		;;
+	-sunos6*)
+		os=`echo $os | sed -e 's|sunos6|solaris3|'`
+		;;
+	-opened*)
+		os=-openedition
+		;;
+	-wince*)
+		os=-wince
+		;;
+	-osfrose*)
+		os=-osfrose
+		;;
+	-osf*)
+		os=-osf
+		;;
+	-utek*)
+		os=-bsd
+		;;
+	-dynix*)
+		os=-bsd
+		;;
+	-acis*)
+		os=-aos
+		;;
+	-atheos*)
+		os=-atheos
+		;;
+	-386bsd)
+		os=-bsd
+		;;
+	-ctix* | -uts*)
+		os=-sysv
+		;;
+	-nova*)
+		os=-rtmk-nova
+		;;
+	-ns2 )
+		os=-nextstep2
+		;;
+	-nsk*)
+		os=-nsk
+		;;
+	# Preserve the version number of sinix5.
+	-sinix5.*)
+		os=`echo $os | sed -e 's|sinix|sysv|'`
+		;;
+	-sinix*)
+		os=-sysv4
+		;;
+	-triton*)
+		os=-sysv3
+		;;
+	-oss*)
+		os=-sysv3
+		;;
+	-svr4)
+		os=-sysv4
+		;;
+	-svr3)
+		os=-sysv3
+		;;
+	-sysvr4)
+		os=-sysv4
+		;;
+	# This must come after -sysvr4.
+	-sysv*)
+		;;
+	-ose*)
+		os=-ose
+		;;
+	-es1800*)
+		os=-ose
+		;;
+	-xenix)
+		os=-xenix
+		;;
+	-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+		os=-mint
+		;;
+	-none)
+		;;
+	*)
+		# Get rid of the `-' at the beginning of $os.
+		os=`echo $os | sed 's/[^-]*-//'`
+		echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
+		exit 1
+		;;
+esac
+else
+
+# Here we handle the default operating systems that come with various machines.
+# The value should be what the vendor currently ships out the door with their
+# machine or put another way, the most popular os provided with the machine.
+
+# Note that if you're going to try to match "-MANUFACTURER" here (say,
+# "-sun"), then you have to tell the case statement up towards the top
+# that MANUFACTURER isn't an operating system.  Otherwise, code above
+# will signal an error saying that MANUFACTURER isn't an operating
+# system, and we'll never get to this point.
+
+case $basic_machine in
+	*-acorn)
+		os=-riscix1.2
+		;;
+	arm*-rebel)
+		os=-linux
+		;;
+	arm*-semi)
+		os=-aout
+		;;
+	# This must come before the *-dec entry.
+	pdp10-*)
+		os=-tops20
+		;;
+	pdp11-*)
+		os=-none
+		;;
+	*-dec | vax-*)
+		os=-ultrix4.2
+		;;
+	m68*-apollo)
+		os=-domain
+		;;
+	i386-sun)
+		os=-sunos4.0.2
+		;;
+	m68000-sun)
+		os=-sunos3
+		# This also exists in the configure program, but was not the
+		# default.
+		# os=-sunos4
+		;;
+	m68*-cisco)
+		os=-aout
+		;;
+	mips*-cisco)
+		os=-elf
+		;;
+	mips*-*)
+		os=-elf
+		;;
+	or32-*)
+		os=-coff
+		;;
+	*-tti)	# must be before sparc entry or we get the wrong os.
+		os=-sysv3
+		;;
+	sparc-* | *-sun)
+		os=-sunos4.1.1
+		;;
+	*-be)
+		os=-beos
+		;;
+	*-ibm)
+		os=-aix
+		;;
+	*-wec)
+		os=-proelf
+		;;
+	*-winbond)
+		os=-proelf
+		;;
+	*-oki)
+		os=-proelf
+		;;
+	*-hp)
+		os=-hpux
+		;;
+	*-hitachi)
+		os=-hiux
+		;;
+	i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
+		os=-sysv
+		;;
+	*-cbm)
+		os=-amigaos
+		;;
+	*-dg)
+		os=-dgux
+		;;
+	*-dolphin)
+		os=-sysv3
+		;;
+	m68k-ccur)
+		os=-rtu
+		;;
+	m88k-omron*)
+		os=-luna
+		;;
+	*-next )
+		os=-nextstep
+		;;
+	*-sequent)
+		os=-ptx
+		;;
+	*-crds)
+		os=-unos
+		;;
+	*-ns)
+		os=-genix
+		;;
+	i370-*)
+		os=-mvs
+		;;
+	*-next)
+		os=-nextstep3
+		;;
+	*-gould)
+		os=-sysv
+		;;
+	*-highlevel)
+		os=-bsd
+		;;
+	*-encore)
+		os=-bsd
+		;;
+	*-sgi)
+		os=-irix
+		;;
+	*-siemens)
+		os=-sysv4
+		;;
+	*-masscomp)
+		os=-rtu
+		;;
+	f30[01]-fujitsu | f700-fujitsu)
+		os=-uxpv
+		;;
+	*-rom68k)
+		os=-coff
+		;;
+	*-*bug)
+		os=-coff
+		;;
+	*-apple)
+		os=-macos
+		;;
+	*-atari*)
+		os=-mint
+		;;
+	*)
+		os=-none
+		;;
+esac
+fi
+
+# Here we handle the case where we know the os, and the CPU type, but not the
+# manufacturer.  We pick the logical manufacturer.
+vendor=unknown
+case $basic_machine in
+	*-unknown)
+		case $os in
+			-riscix*)
+				vendor=acorn
+				;;
+			-sunos*)
+				vendor=sun
+				;;
+			-aix*)
+				vendor=ibm
+				;;
+			-beos*)
+				vendor=be
+				;;
+			-hpux*)
+				vendor=hp
+				;;
+			-mpeix*)
+				vendor=hp
+				;;
+			-hiux*)
+				vendor=hitachi
+				;;
+			-unos*)
+				vendor=crds
+				;;
+			-dgux*)
+				vendor=dg
+				;;
+			-luna*)
+				vendor=omron
+				;;
+			-genix*)
+				vendor=ns
+				;;
+			-mvs* | -opened*)
+				vendor=ibm
+				;;
+			-ptx*)
+				vendor=sequent
+				;;
+			-vxsim* | -vxworks* | -windiss*)
+				vendor=wrs
+				;;
+			-aux*)
+				vendor=apple
+				;;
+			-hms*)
+				vendor=hitachi
+				;;
+			-mpw* | -macos*)
+				vendor=apple
+				;;
+			-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+				vendor=atari
+				;;
+			-vos*)
+				vendor=stratus
+				;;
+		esac
+		basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
+		;;
+esac
+
+echo $basic_machine$os
+exit 0
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
diff --git a/configure b/configure
index 91fefb9..4d2a80c 100755
--- a/configure
+++ b/configure
@@ -1,13 +1,10612 @@
-#!/bin/sh
-echo "
-  There is no \"configure\" script in this distribution of
-  libpng-1.2.8rc5.
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.57 for libpng 1.2.8-automake.
+#
+# Report bugs to <png-implement@ccrc.wustl.edu>.
+#
+# Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002
+# Free Software Foundation, Inc.
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## --------------------- ##
+## M4sh Initialization.  ##
+## --------------------- ##
 
-  Instead, please copy the appropriate makefile for your system from the
-  \"scripts\" directory.  Read the INSTALL file for more details.
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
+  set -o posix
+fi
 
-  Update, July 2004: you can get a "configure" based distribution
-  from the libpng distribution sites.  Download the file
-  libpng-1.2.8rc5-config.tar.gz
-"
+# Support unset when possible.
+if (FOO=FOO; unset FOO) >/dev/null 2>&1; then
+  as_unset=unset
+else
+  as_unset=false
+fi
+
+
+# Work around bugs in pre-3.0 UWIN ksh.
+$as_unset ENV MAIL MAILPATH
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+for as_var in \
+  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
+  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
+  LC_TELEPHONE LC_TIME
+do
+  if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then
+    eval $as_var=C; export $as_var
+  else
+    $as_unset $as_var
+  fi
+done
+
+# Required to use basename.
+if expr a : '\(a\)' >/dev/null 2>&1; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+
+# Name of the executable.
+as_me=`$as_basename "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)$' \| \
+	 .     : '\(.\)' 2>/dev/null ||
+echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
+  	  /^X\/\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\/\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+
+
+# PATH needs CR, and LINENO needs CR and PATH.
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  echo "#! /bin/sh" >conf$$.sh
+  echo  "exit 0"   >>conf$$.sh
+  chmod +x conf$$.sh
+  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+    PATH_SEPARATOR=';'
+  else
+    PATH_SEPARATOR=:
+  fi
+  rm -f conf$$.sh
+fi
+
+
+  as_lineno_1=$LINENO
+  as_lineno_2=$LINENO
+  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+  test "x$as_lineno_1" != "x$as_lineno_2" &&
+  test "x$as_lineno_3"  = "x$as_lineno_2"  || {
+  # Find who we are.  Look in the path if we contain no path at all
+  # relative or not.
+  case $0 in
+    *[\\/]* ) as_myself=$0 ;;
+    *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+
+       ;;
+  esac
+  # We did not find ourselves, most probably we were run as `sh COMMAND'
+  # in which case we are not to be found in the path.
+  if test "x$as_myself" = x; then
+    as_myself=$0
+  fi
+  if test ! -f "$as_myself"; then
+    { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2
+   { (exit 1); exit 1; }; }
+  fi
+  case $CONFIG_SHELL in
+  '')
+    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for as_base in sh bash ksh sh5; do
+	 case $as_dir in
+	 /*)
+	   if ("$as_dir/$as_base" -c '
+  as_lineno_1=$LINENO
+  as_lineno_2=$LINENO
+  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+  test "x$as_lineno_1" != "x$as_lineno_2" &&
+  test "x$as_lineno_3"  = "x$as_lineno_2" ') 2>/dev/null; then
+	     $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
+	     $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
+	     CONFIG_SHELL=$as_dir/$as_base
+	     export CONFIG_SHELL
+	     exec "$CONFIG_SHELL" "$0" ${1+"$@"}
+	   fi;;
+	 esac
+       done
+done
+;;
+  esac
+
+  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
+  # uniformly replaced by the line number.  The first 'sed' inserts a
+  # line-number line before each line; the second 'sed' does the real
+  # work.  The second script uses 'N' to pair each line-number line
+  # with the numbered line, and appends trailing '-' during
+  # substitution so that $LINENO is not a special case at line end.
+  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
+  # second 'sed' script.  Blame Lee E. McMahon for sed's syntax.  :-)
+  sed '=' <$as_myself |
+    sed '
+      N
+      s,$,-,
+      : loop
+      s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
+      t loop
+      s,-$,,
+      s,^['$as_cr_digits']*\n,,
+    ' >$as_me.lineno &&
+  chmod +x $as_me.lineno ||
+    { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
+   { (exit 1); exit 1; }; }
+
+  # Don't try to exec as it changes $[0], causing all sort of problems
+  # (the dirname of $[0] is not the place where we might find the
+  # original and so on.  Autoconf is especially sensible to this).
+  . ./$as_me.lineno
+  # Exit status is that of the last command.
+  exit
+}
+
+
+case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
+  *c*,-n*) ECHO_N= ECHO_C='
+' ECHO_T='	' ;;
+  *c*,*  ) ECHO_N=-n ECHO_C= ECHO_T= ;;
+  *)       ECHO_N= ECHO_C='\c' ECHO_T= ;;
+esac
+
+if expr a : '\(a\)' >/dev/null 2>&1; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+rm -f conf$$ conf$$.exe conf$$.file
+echo >conf$$.file
+if ln -s conf$$.file conf$$ 2>/dev/null; then
+  # We could just check for DJGPP; but this test a) works b) is more generic
+  # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
+  if test -f conf$$.exe; then
+    # Don't use ln at all; we don't have any links
+    as_ln_s='cp -p'
+  else
+    as_ln_s='ln -s'
+  fi
+elif ln conf$$.file conf$$ 2>/dev/null; then
+  as_ln_s=ln
+else
+  as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.file
+
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p=:
+else
+  as_mkdir_p=false
+fi
+
+as_executable_p="test -f"
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g"
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.
+as_nl='
+'
+IFS=" 	$as_nl"
+
+# CDPATH.
+$as_unset CDPATH
+
+
+# Find the correct PATH separator.  Usually this is `:', but
+# DJGPP uses `;' like DOS.
+if test "X${PATH_SEPARATOR+set}" != Xset; then
+  UNAME=${UNAME-`uname 2>/dev/null`}
+  case X$UNAME in
+    *-DOS) lt_cv_sys_path_separator=';' ;;
+    *)     lt_cv_sys_path_separator=':' ;;
+  esac
+  PATH_SEPARATOR=$lt_cv_sys_path_separator
+fi
+
+
+# Check that we are running under the correct shell.
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+case X$ECHO in
+X*--fallback-echo)
+  # Remove one level of quotation (which was required for Make).
+  ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','`
+  ;;
+esac
+
+echo=${ECHO-echo}
+if test "X$1" = X--no-reexec; then
+  # Discard the --no-reexec flag, and continue.
+  shift
+elif test "X$1" = X--fallback-echo; then
+  # Avoid inline document here, it may be left over
+  :
+elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
+  # Yippee, $echo works!
+  :
+else
+  # Restart under the correct shell.
+  exec $SHELL "$0" --no-reexec ${1+"$@"}
+fi
+
+if test "X$1" = X--fallback-echo; then
+  # used as fallback echo
+  shift
+  cat <<EOF
+
+EOF
+  exit 0
+fi
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
+
+if test -z "$ECHO"; then
+if test "X${echo_test_string+set}" != Xset; then
+# find a string as large as possible, as long as the shell can cope with it
+  for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
+    # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+    if (echo_test_string="`eval $cmd`") 2>/dev/null &&
+       echo_test_string="`eval $cmd`" &&
+       (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
+    then
+      break
+    fi
+  done
+fi
+
+if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
+   echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
+   test "X$echo_testing_string" = "X$echo_test_string"; then
+  :
+else
+  # The Solaris, AIX, and Digital Unix default echo programs unquote
+  # backslashes.  This makes it impossible to quote backslashes using
+  #   echo "$something" | sed 's/\\/\\\\/g'
+  #
+  # So, first we look for a working echo in the user's PATH.
+
+  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for dir in $PATH /usr/ucb; do
+    if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+       test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+       echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
+       test "X$echo_testing_string" = "X$echo_test_string"; then
+      echo="$dir/echo"
+      break
+    fi
+  done
+  IFS="$save_ifs"
+
+  if test "X$echo" = Xecho; then
+    # We didn't find a better echo, so look for alternatives.
+    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
+       echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
+       test "X$echo_testing_string" = "X$echo_test_string"; then
+      # This shell has a builtin print -r that does the trick.
+      echo='print -r'
+    elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
+	 test "X$CONFIG_SHELL" != X/bin/ksh; then
+      # If we have ksh, try running configure again with it.
+      ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+      export ORIGINAL_CONFIG_SHELL
+      CONFIG_SHELL=/bin/ksh
+      export CONFIG_SHELL
+      exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
+    else
+      # Try using printf.
+      echo='printf %s\n'
+      if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
+	 echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
+	 test "X$echo_testing_string" = "X$echo_test_string"; then
+	# Cool, printf works
+	:
+      elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
+	   test "X$echo_testing_string" = 'X\t' &&
+	   echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+	   test "X$echo_testing_string" = "X$echo_test_string"; then
+	CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
+	export CONFIG_SHELL
+	SHELL="$CONFIG_SHELL"
+	export SHELL
+	echo="$CONFIG_SHELL $0 --fallback-echo"
+      elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
+	   test "X$echo_testing_string" = 'X\t' &&
+	   echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+	   test "X$echo_testing_string" = "X$echo_test_string"; then
+	echo="$CONFIG_SHELL $0 --fallback-echo"
+      else
+	# maybe with a smaller string...
+	prev=:
+
+	for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
+	  if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
+	  then
+	    break
+	  fi
+	  prev="$cmd"
+	done
+
+	if test "$prev" != 'sed 50q "$0"'; then
+	  echo_test_string=`eval $prev`
+	  export echo_test_string
+	  exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
+	else
+	  # Oops.  We lost completely, so just stick with echo.
+	  echo=echo
+	fi
+      fi
+    fi
+  fi
+fi
+fi
+
+# Copy echo and quote the copy suitably for passing to libtool from
+# the Makefile, instead of quoting the original, which is used later.
+ECHO=$echo
+if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
+   ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
+fi
+
+
+
+# Name of the host.
+# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+exec 6>&1
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_config_libobj_dir=.
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+# Maximum number of lines to put in a shell here document.
+# This variable seems obsolete.  It should probably be removed, and
+# only ac_max_sed_lines should be used.
+: ${ac_max_here_lines=38}
+
+# Identity of this package.
+PACKAGE_NAME='libpng'
+PACKAGE_TARNAME='libpng'
+PACKAGE_VERSION='1.2.8-automake'
+PACKAGE_STRING='libpng 1.2.8-automake'
+PACKAGE_BUGREPORT='png-implement@ccrc.wustl.edu'
+
+ac_unique_file="pngget.c"
+# Factoring default headers for most tests.
+ac_includes_default="\
+#include <stdio.h>
+#if HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+#if HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+#if STDC_HEADERS
+# include <stdlib.h>
+# include <stddef.h>
+#else
+# if HAVE_STDLIB_H
+#  include <stdlib.h>
+# endif
+#endif
+#if HAVE_STRING_H
+# if !STDC_HEADERS && HAVE_MEMORY_H
+#  include <memory.h>
+# endif
+# include <string.h>
+#endif
+#if HAVE_STRINGS_H
+# include <strings.h>
+#endif
+#if HAVE_INTTYPES_H
+# include <inttypes.h>
+#else
+# if HAVE_STDINT_H
+#  include <stdint.h>
+# endif
+#endif
+#if HAVE_UNISTD_H
+# include <unistd.h>
+#endif"
+
+ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO AMTAR install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM AWK SET_MAKE CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE build build_cpu build_vendor build_os host host_cpu host_vendor host_os LN_S ECHO RANLIB ac_ct_RANLIB CPP EGREP LIBTOOL LIBOBJS POW_LIB PKGCONFIGDIR LIBPNG12_VERSION_INFO LIBPNG3_VERSION_INFO LTLIBOBJS'
+ac_subst_files=''
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datadir='${prefix}/share'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+libdir='${exec_prefix}/lib'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+infodir='${prefix}/info'
+mandir='${prefix}/man'
+
+ac_prev=
+for ac_option
+do
+  # If the previous option needs an argument, assign it.
+  if test -n "$ac_prev"; then
+    eval "$ac_prev=\$ac_option"
+    ac_prev=
+    continue
+  fi
+
+  ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
+
+  # Accept the important Cygnus configure options, so we can diagnose typos.
+
+  case $ac_option in
+
+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
+    ac_prev=bindir ;;
+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+    bindir=$ac_optarg ;;
+
+  -build | --build | --buil | --bui | --bu)
+    ac_prev=build_alias ;;
+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+    build_alias=$ac_optarg ;;
+
+  -cache-file | --cache-file | --cache-fil | --cache-fi \
+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+    ac_prev=cache_file ;;
+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+    cache_file=$ac_optarg ;;
+
+  --config-cache | -C)
+    cache_file=config.cache ;;
+
+  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
+    ac_prev=datadir ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
+  | --da=*)
+    datadir=$ac_optarg ;;
+
+  -disable-* | --disable-*)
+    ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+   { (exit 1); exit 1; }; }
+    ac_feature=`echo $ac_feature | sed 's/-/_/g'`
+    eval "enable_$ac_feature=no" ;;
+
+  -enable-* | --enable-*)
+    ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+   { (exit 1); exit 1; }; }
+    ac_feature=`echo $ac_feature | sed 's/-/_/g'`
+    case $ac_option in
+      *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
+      *) ac_optarg=yes ;;
+    esac
+    eval "enable_$ac_feature='$ac_optarg'" ;;
+
+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+  | --exec | --exe | --ex)
+    ac_prev=exec_prefix ;;
+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+  | --exec=* | --exe=* | --ex=*)
+    exec_prefix=$ac_optarg ;;
+
+  -gas | --gas | --ga | --g)
+    # Obsolete; use --with-gas.
+    with_gas=yes ;;
+
+  -help | --help | --hel | --he | -h)
+    ac_init_help=long ;;
+  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+    ac_init_help=recursive ;;
+  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+    ac_init_help=short ;;
+
+  -host | --host | --hos | --ho)
+    ac_prev=host_alias ;;
+  -host=* | --host=* | --hos=* | --ho=*)
+    host_alias=$ac_optarg ;;
+
+  -includedir | --includedir | --includedi | --included | --include \
+  | --includ | --inclu | --incl | --inc)
+    ac_prev=includedir ;;
+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+  | --includ=* | --inclu=* | --incl=* | --inc=*)
+    includedir=$ac_optarg ;;
+
+  -infodir | --infodir | --infodi | --infod | --info | --inf)
+    ac_prev=infodir ;;
+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+    infodir=$ac_optarg ;;
+
+  -libdir | --libdir | --libdi | --libd)
+    ac_prev=libdir ;;
+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
+    libdir=$ac_optarg ;;
+
+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+  | --libexe | --libex | --libe)
+    ac_prev=libexecdir ;;
+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+  | --libexe=* | --libex=* | --libe=*)
+    libexecdir=$ac_optarg ;;
+
+  -localstatedir | --localstatedir | --localstatedi | --localstated \
+  | --localstate | --localstat | --localsta | --localst \
+  | --locals | --local | --loca | --loc | --lo)
+    ac_prev=localstatedir ;;
+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
+  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
+    localstatedir=$ac_optarg ;;
+
+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+    ac_prev=mandir ;;
+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+    mandir=$ac_optarg ;;
+
+  -nfp | --nfp | --nf)
+    # Obsolete; use --without-fp.
+    with_fp=no ;;
+
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c | -n)
+    no_create=yes ;;
+
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+    no_recursion=yes ;;
+
+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+  | --oldin | --oldi | --old | --ol | --o)
+    ac_prev=oldincludedir ;;
+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+    oldincludedir=$ac_optarg ;;
+
+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+    ac_prev=prefix ;;
+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+    prefix=$ac_optarg ;;
+
+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
+  | --program-pre | --program-pr | --program-p)
+    ac_prev=program_prefix ;;
+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+    program_prefix=$ac_optarg ;;
+
+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
+  | --program-suf | --program-su | --program-s)
+    ac_prev=program_suffix ;;
+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+    program_suffix=$ac_optarg ;;
+
+  -program-transform-name | --program-transform-name \
+  | --program-transform-nam | --program-transform-na \
+  | --program-transform-n | --program-transform- \
+  | --program-transform | --program-transfor \
+  | --program-transfo | --program-transf \
+  | --program-trans | --program-tran \
+  | --progr-tra | --program-tr | --program-t)
+    ac_prev=program_transform_name ;;
+  -program-transform-name=* | --program-transform-name=* \
+  | --program-transform-nam=* | --program-transform-na=* \
+  | --program-transform-n=* | --program-transform-=* \
+  | --program-transform=* | --program-transfor=* \
+  | --program-transfo=* | --program-transf=* \
+  | --program-trans=* | --program-tran=* \
+  | --progr-tra=* | --program-tr=* | --program-t=*)
+    program_transform_name=$ac_optarg ;;
+
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil)
+    silent=yes ;;
+
+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+    ac_prev=sbindir ;;
+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+  | --sbi=* | --sb=*)
+    sbindir=$ac_optarg ;;
+
+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+  | --sharedst | --shareds | --shared | --share | --shar \
+  | --sha | --sh)
+    ac_prev=sharedstatedir ;;
+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+  | --sha=* | --sh=*)
+    sharedstatedir=$ac_optarg ;;
+
+  -site | --site | --sit)
+    ac_prev=site ;;
+  -site=* | --site=* | --sit=*)
+    site=$ac_optarg ;;
+
+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+    ac_prev=srcdir ;;
+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+    srcdir=$ac_optarg ;;
+
+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+  | --syscon | --sysco | --sysc | --sys | --sy)
+    ac_prev=sysconfdir ;;
+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+    sysconfdir=$ac_optarg ;;
+
+  -target | --target | --targe | --targ | --tar | --ta | --t)
+    ac_prev=target_alias ;;
+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+    target_alias=$ac_optarg ;;
+
+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
+    verbose=yes ;;
+
+  -version | --version | --versio | --versi | --vers | -V)
+    ac_init_version=: ;;
+
+  -with-* | --with-*)
+    ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+      { echo "$as_me: error: invalid package name: $ac_package" >&2
+   { (exit 1); exit 1; }; }
+    ac_package=`echo $ac_package| sed 's/-/_/g'`
+    case $ac_option in
+      *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
+      *) ac_optarg=yes ;;
+    esac
+    eval "with_$ac_package='$ac_optarg'" ;;
+
+  -without-* | --without-*)
+    ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+      { echo "$as_me: error: invalid package name: $ac_package" >&2
+   { (exit 1); exit 1; }; }
+    ac_package=`echo $ac_package | sed 's/-/_/g'`
+    eval "with_$ac_package=no" ;;
+
+  --x)
+    # Obsolete; use --with-x.
+    with_x=yes ;;
+
+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+  | --x-incl | --x-inc | --x-in | --x-i)
+    ac_prev=x_includes ;;
+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+    x_includes=$ac_optarg ;;
+
+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+    ac_prev=x_libraries ;;
+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+    x_libraries=$ac_optarg ;;
+
+  -*) { echo "$as_me: error: unrecognized option: $ac_option
+Try \`$0 --help' for more information." >&2
+   { (exit 1); exit 1; }; }
+    ;;
+
+  *=*)
+    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
+      { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
+   { (exit 1); exit 1; }; }
+    ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
+    eval "$ac_envvar='$ac_optarg'"
+    export $ac_envvar ;;
+
+  *)
+    # FIXME: should be removed in autoconf 3.0.
+    echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+      echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+    : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
+    ;;
+
+  esac
+done
+
+if test -n "$ac_prev"; then
+  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+  { echo "$as_me: error: missing argument to $ac_option" >&2
+   { (exit 1); exit 1; }; }
+fi
+
+# Be sure to have absolute paths.
+for ac_var in exec_prefix prefix
+do
+  eval ac_val=$`echo $ac_var`
+  case $ac_val in
+    [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
+    *)  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+   { (exit 1); exit 1; }; };;
+  esac
+done
+
+# Be sure to have absolute paths.
+for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
+              localstatedir libdir includedir oldincludedir infodir mandir
+do
+  eval ac_val=$`echo $ac_var`
+  case $ac_val in
+    [\\/$]* | ?:[\\/]* ) ;;
+    *)  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+   { (exit 1); exit 1; }; };;
+  esac
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+  if test "x$build_alias" = x; then
+    cross_compiling=maybe
+    echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
+    If a cross compiler is detected then cross compile mode will be used." >&2
+  elif test "x$build_alias" != "x$host_alias"; then
+    cross_compiling=yes
+  fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+  ac_srcdir_defaulted=yes
+  # Try the directory containing this script, then its parent.
+  ac_confdir=`(dirname "$0") 2>/dev/null ||
+$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+         X"$0" : 'X\(//\)[^/]' \| \
+         X"$0" : 'X\(//\)$' \| \
+         X"$0" : 'X\(/\)' \| \
+         .     : '\(.\)' 2>/dev/null ||
+echo X"$0" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+  srcdir=$ac_confdir
+  if test ! -r $srcdir/$ac_unique_file; then
+    srcdir=..
+  fi
+else
+  ac_srcdir_defaulted=no
+fi
+if test ! -r $srcdir/$ac_unique_file; then
+  if test "$ac_srcdir_defaulted" = yes; then
+    { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2
+   { (exit 1); exit 1; }; }
+  else
+    { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
+   { (exit 1); exit 1; }; }
+  fi
+fi
+(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null ||
+  { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2
+   { (exit 1); exit 1; }; }
+srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
+ac_env_build_alias_set=${build_alias+set}
+ac_env_build_alias_value=$build_alias
+ac_cv_env_build_alias_set=${build_alias+set}
+ac_cv_env_build_alias_value=$build_alias
+ac_env_host_alias_set=${host_alias+set}
+ac_env_host_alias_value=$host_alias
+ac_cv_env_host_alias_set=${host_alias+set}
+ac_cv_env_host_alias_value=$host_alias
+ac_env_target_alias_set=${target_alias+set}
+ac_env_target_alias_value=$target_alias
+ac_cv_env_target_alias_set=${target_alias+set}
+ac_cv_env_target_alias_value=$target_alias
+ac_env_CC_set=${CC+set}
+ac_env_CC_value=$CC
+ac_cv_env_CC_set=${CC+set}
+ac_cv_env_CC_value=$CC
+ac_env_CFLAGS_set=${CFLAGS+set}
+ac_env_CFLAGS_value=$CFLAGS
+ac_cv_env_CFLAGS_set=${CFLAGS+set}
+ac_cv_env_CFLAGS_value=$CFLAGS
+ac_env_LDFLAGS_set=${LDFLAGS+set}
+ac_env_LDFLAGS_value=$LDFLAGS
+ac_cv_env_LDFLAGS_set=${LDFLAGS+set}
+ac_cv_env_LDFLAGS_value=$LDFLAGS
+ac_env_CPPFLAGS_set=${CPPFLAGS+set}
+ac_env_CPPFLAGS_value=$CPPFLAGS
+ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set}
+ac_cv_env_CPPFLAGS_value=$CPPFLAGS
+ac_env_CPP_set=${CPP+set}
+ac_env_CPP_value=$CPP
+ac_cv_env_CPP_set=${CPP+set}
+ac_cv_env_CPP_value=$CPP
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+  # Omit some internal or obsolete options to make the list less imposing.
+  # This message is too long to be a string in the A/UX 3.1 sh.
+  cat <<_ACEOF
+\`configure' configures libpng 1.2.8-automake to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE.  See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+  -h, --help              display this help and exit
+      --help=short        display options specific to this package
+      --help=recursive    display the short help of all the included packages
+  -V, --version           display version information and exit
+  -q, --quiet, --silent   do not print \`checking...' messages
+      --cache-file=FILE   cache test results in FILE [disabled]
+  -C, --config-cache      alias for \`--cache-file=config.cache'
+  -n, --no-create         do not create output files
+      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
+
+_ACEOF
+
+  cat <<_ACEOF
+Installation directories:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+                          [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                          [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+  --bindir=DIR           user executables [EPREFIX/bin]
+  --sbindir=DIR          system admin executables [EPREFIX/sbin]
+  --libexecdir=DIR       program executables [EPREFIX/libexec]
+  --datadir=DIR          read-only architecture-independent data [PREFIX/share]
+  --sysconfdir=DIR       read-only single-machine data [PREFIX/etc]
+  --sharedstatedir=DIR   modifiable architecture-independent data [PREFIX/com]
+  --localstatedir=DIR    modifiable single-machine data [PREFIX/var]
+  --libdir=DIR           object code libraries [EPREFIX/lib]
+  --includedir=DIR       C header files [PREFIX/include]
+  --oldincludedir=DIR    C header files for non-gcc [/usr/include]
+  --infodir=DIR          info documentation [PREFIX/info]
+  --mandir=DIR           man documentation [PREFIX/man]
+_ACEOF
+
+  cat <<\_ACEOF
+
+Program names:
+  --program-prefix=PREFIX            prepend PREFIX to installed program names
+  --program-suffix=SUFFIX            append SUFFIX to installed program names
+  --program-transform-name=PROGRAM   run sed PROGRAM on installed program names
+
+X features:
+  --x-includes=DIR    X include files are in DIR
+  --x-libraries=DIR   X library files are in DIR
+
+System types:
+  --build=BUILD     configure for building on BUILD [guessed]
+  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+  case $ac_init_help in
+     short | recursive ) echo "Configuration of libpng 1.2.8-automake:";;
+   esac
+  cat <<\_ACEOF
+
+Optional Features:
+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --disable-dependency-tracking Speeds up one-time builds
+  --enable-dependency-tracking  Do not reject slow dependency extractors
+  --enable-shared=PKGS  build shared libraries default=yes
+  --enable-static=PKGS  build static libraries default=yes
+  --enable-fast-install=PKGS  optimize for fast installation default=yes
+  --disable-libtool-lock  avoid locking (might break parallel builds)
+
+Optional Packages:
+  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+  --with-gnu-ld           assume the C compiler uses GNU ld default=no
+  --with-pic              try to use only PIC/non-PIC objects default=use both
+  --with-x                use the X Window System
+  --with-pkgconfigdir     Use the specified pkgconfig dir (default is
+                          prefix/lib/pkgconfig)
+
+Some influential environment variables:
+  CC          C compiler command
+  CFLAGS      C compiler flags
+  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
+              nonstandard directory <lib dir>
+  CPPFLAGS    C/C++ preprocessor flags, e.g. -I<include dir> if you have
+              headers in a nonstandard directory <include dir>
+  CPP         C preprocessor
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+Report bugs to <png-implement@ccrc.wustl.edu>.
+_ACEOF
+fi
+
+if test "$ac_init_help" = "recursive"; then
+  # If there are subdirs, report their specific --help.
+  ac_popdir=`pwd`
+  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+    test -d $ac_dir || continue
+    ac_builddir=.
+
+if test "$ac_dir" != .; then
+  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+  # A "../" for each directory in $ac_dir_suffix.
+  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
+else
+  ac_dir_suffix= ac_top_builddir=
+fi
+
+case $srcdir in
+  .)  # No --srcdir option.  We are building in place.
+    ac_srcdir=.
+    if test -z "$ac_top_builddir"; then
+       ac_top_srcdir=.
+    else
+       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
+    fi ;;
+  [\\/]* | ?:[\\/]* )  # Absolute path.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir ;;
+  *) # Relative path.
+    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_builddir$srcdir ;;
+esac
+# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be
+# absolute.
+ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd`
+ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd`
+ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd`
+ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd`
+
+    cd $ac_dir
+    # Check for guested configure; otherwise get Cygnus style configure.
+    if test -f $ac_srcdir/configure.gnu; then
+      echo
+      $SHELL $ac_srcdir/configure.gnu  --help=recursive
+    elif test -f $ac_srcdir/configure; then
+      echo
+      $SHELL $ac_srcdir/configure  --help=recursive
+    elif test -f $ac_srcdir/configure.ac ||
+           test -f $ac_srcdir/configure.in; then
+      echo
+      $ac_configure --help
+    else
+      echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+    fi
+    cd $ac_popdir
+  done
+fi
+
+test -n "$ac_init_help" && exit 0
+if $ac_init_version; then
+  cat <<\_ACEOF
+libpng configure 1.2.8-automake
+generated by GNU Autoconf 2.57
+
+Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002
+Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+  exit 0
+fi
+exec 5>config.log
+cat >&5 <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by libpng $as_me 1.2.8-automake, which was
+generated by GNU Autoconf 2.57.  Invocation command line was
+
+  $ $0 $@
+
+_ACEOF
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
+
+/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+hostinfo               = `(hostinfo) 2>/dev/null               || echo unknown`
+/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
+/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  echo "PATH: $as_dir"
+done
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_sep=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+  for ac_arg
+  do
+    case $ac_arg in
+    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+    | -silent | --silent | --silen | --sile | --sil)
+      continue ;;
+    *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
+      ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    case $ac_pass in
+    1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
+    2)
+      ac_configure_args1="$ac_configure_args1 '$ac_arg'"
+      if test $ac_must_keep_next = true; then
+        ac_must_keep_next=false # Got value, back to normal.
+      else
+        case $ac_arg in
+          *=* | --config-cache | -C | -disable-* | --disable-* \
+          | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+          | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+          | -with-* | --with-* | -without-* | --without-* | --x)
+            case "$ac_configure_args0 " in
+              "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+            esac
+            ;;
+          -* ) ac_must_keep_next=true ;;
+        esac
+      fi
+      ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
+      # Get rid of the leading space.
+      ac_sep=" "
+      ;;
+    esac
+  done
+done
+$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
+$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log.  We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Be sure not to use single quotes in there, as some shells,
+# such as our DU 5.0 friend, will then `close' the trap.
+trap 'exit_status=$?
+  # Save into config.log some information that might help in debugging.
+  {
+    echo
+
+    cat <<\_ASBOX
+## ---------------- ##
+## Cache variables. ##
+## ---------------- ##
+_ASBOX
+    echo
+    # The following way of writing the cache mishandles newlines in values,
+{
+  (set) 2>&1 |
+    case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
+    *ac_space=\ *)
+      sed -n \
+        "s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
+    	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
+      ;;
+    *)
+      sed -n \
+        "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+      ;;
+    esac;
+}
+    echo
+
+    cat <<\_ASBOX
+## ----------------- ##
+## Output variables. ##
+## ----------------- ##
+_ASBOX
+    echo
+    for ac_var in $ac_subst_vars
+    do
+      eval ac_val=$`echo $ac_var`
+      echo "$ac_var='"'"'$ac_val'"'"'"
+    done | sort
+    echo
+
+    if test -n "$ac_subst_files"; then
+      cat <<\_ASBOX
+## ------------- ##
+## Output files. ##
+## ------------- ##
+_ASBOX
+      echo
+      for ac_var in $ac_subst_files
+      do
+	eval ac_val=$`echo $ac_var`
+        echo "$ac_var='"'"'$ac_val'"'"'"
+      done | sort
+      echo
+    fi
+
+    if test -s confdefs.h; then
+      cat <<\_ASBOX
+## ----------- ##
+## confdefs.h. ##
+## ----------- ##
+_ASBOX
+      echo
+      sed "/^$/d" confdefs.h | sort
+      echo
+    fi
+    test "$ac_signal" != 0 &&
+      echo "$as_me: caught signal $ac_signal"
+    echo "$as_me: exit $exit_status"
+  } >&5
+  rm -f core core.* *.core &&
+  rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
+    exit $exit_status
+     ' 0
+for ac_signal in 1 2 13 15; do
+  trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -rf conftest* confdefs.h
+# AIX cpp loses on an empty file, so make sure it contains at least a newline.
+echo >confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer explicitly selected file to automatically selected ones.
+if test -z "$CONFIG_SITE"; then
+  if test "x$prefix" != xNONE; then
+    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+  else
+    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+  fi
+fi
+for ac_site_file in $CONFIG_SITE; do
+  if test -r "$ac_site_file"; then
+    { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
+echo "$as_me: loading site script $ac_site_file" >&6;}
+    sed 's/^/| /' "$ac_site_file" >&5
+    . "$ac_site_file"
+  fi
+done
+
+if test -r "$cache_file"; then
+  # Some versions of bash will fail to source /dev/null (special
+  # files actually), so we avoid doing that.
+  if test -f "$cache_file"; then
+    { echo "$as_me:$LINENO: loading cache $cache_file" >&5
+echo "$as_me: loading cache $cache_file" >&6;}
+    case $cache_file in
+      [\\/]* | ?:[\\/]* ) . $cache_file;;
+      *)                      . ./$cache_file;;
+    esac
+  fi
+else
+  { echo "$as_me:$LINENO: creating cache $cache_file" >&5
+echo "$as_me: creating cache $cache_file" >&6;}
+  >$cache_file
+fi
+
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in `(set) 2>&1 |
+               sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
+  eval ac_old_set=\$ac_cv_env_${ac_var}_set
+  eval ac_new_set=\$ac_env_${ac_var}_set
+  eval ac_old_val="\$ac_cv_env_${ac_var}_value"
+  eval ac_new_val="\$ac_env_${ac_var}_value"
+  case $ac_old_set,$ac_new_set in
+    set,)
+      { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,set)
+      { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
+echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,);;
+    *)
+      if test "x$ac_old_val" != "x$ac_new_val"; then
+        { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
+echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+        { echo "$as_me:$LINENO:   former value:  $ac_old_val" >&5
+echo "$as_me:   former value:  $ac_old_val" >&2;}
+        { echo "$as_me:$LINENO:   current value: $ac_new_val" >&5
+echo "$as_me:   current value: $ac_new_val" >&2;}
+        ac_cache_corrupted=:
+      fi;;
+  esac
+  # Pass precious variables to config.status.
+  if test "$ac_new_set" = set; then
+    case $ac_new_val in
+    *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
+      ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+    *) ac_arg=$ac_var=$ac_new_val ;;
+    esac
+    case " $ac_configure_args " in
+      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
+      *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+    esac
+  fi
+done
+if $ac_cache_corrupted; then
+  { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
+echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+  { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
+echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+am__api_version="1.7"
+ac_aux_dir=
+for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
+  if test -f $ac_dir/install-sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f $ac_dir/install.sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  elif test -f $ac_dir/shtool; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/shtool install -c"
+    break
+  fi
+done
+if test -z "$ac_aux_dir"; then
+  { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5
+echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;}
+   { (exit 1); exit 1; }; }
+fi
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"
+ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
+
+# Find a good install program.  We prefer a C program (faster),
+# so one script is as good as another.  But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# ./install, which can be erroneously created by make from ./install.sh.
+echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
+if test -z "$INSTALL"; then
+if test "${ac_cv_path_install+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in
+  ./ | .// | /cC/* | \
+  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+  /usr/ucb/* ) ;;
+  *)
+    # OSF1 and SCO ODT 3.0 have their own names for install.
+    # Don't use installbsd from OSF since it installs stuff as root
+    # by default.
+    for ac_prog in ginstall scoinst install; do
+      for ac_exec_ext in '' $ac_executable_extensions; do
+        if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
+          if test $ac_prog = install &&
+            grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+            # AIX install.  It has an incompatible calling convention.
+            :
+          elif test $ac_prog = install &&
+            grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+            # program-specific install script used by HP pwplus--don't use.
+            :
+          else
+            ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+            break 3
+          fi
+        fi
+      done
+    done
+    ;;
+esac
+done
+
+
+fi
+  if test "${ac_cv_path_install+set}" = set; then
+    INSTALL=$ac_cv_path_install
+  else
+    # As a last resort, use the slow shell script.  We don't cache a
+    # path for INSTALL within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the path is relative.
+    INSTALL=$ac_install_sh
+  fi
+fi
+echo "$as_me:$LINENO: result: $INSTALL" >&5
+echo "${ECHO_T}$INSTALL" >&6
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+echo "$as_me:$LINENO: checking whether build environment is sane" >&5
+echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+   if test "$*" = "X"; then
+      # -L didn't work.
+      set X `ls -t $srcdir/configure conftest.file`
+   fi
+   rm -f conftest.file
+   if test "$*" != "X $srcdir/configure conftest.file" \
+      && test "$*" != "X conftest.file $srcdir/configure"; then
+
+      # If neither matched, then we have a broken ls.  This can happen
+      # if, for instance, CONFIG_SHELL is bash and it inherits a
+      # broken ls alias from the environment.  This has actually
+      # happened.  Such a system could not be considered "sane".
+      { { echo "$as_me:$LINENO: error: ls -t appears to fail.  Make sure there is not a broken
+alias in your environment" >&5
+echo "$as_me: error: ls -t appears to fail.  Make sure there is not a broken
+alias in your environment" >&2;}
+   { (exit 1); exit 1; }; }
+   fi
+
+   test "$2" = conftest.file
+   )
+then
+   # Ok.
+   :
+else
+   { { echo "$as_me:$LINENO: error: newly created file is older than distributed files!
+Check your system clock" >&5
+echo "$as_me: error: newly created file is older than distributed files!
+Check your system clock" >&2;}
+   { (exit 1); exit 1; }; }
+fi
+echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+test "$program_prefix" != NONE &&
+  program_transform_name="s,^,$program_prefix,;$program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+  program_transform_name="s,\$,$program_suffix,;$program_transform_name"
+# Double any \ or $.  echo might interpret backslashes.
+# By default was `s,x,x', remove it if useless.
+cat <<\_ACEOF >conftest.sed
+s/[\\$]/&&/g;s/;s,x,x,$//
+_ACEOF
+program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
+rm conftest.sed
+
+
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+
+test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+  am_missing_run="$MISSING --run "
+else
+  am_missing_run=
+  { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
+echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+fi
+
+for ac_prog in gawk mawk nawk awk
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_AWK+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$AWK"; then
+  ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_AWK="$ac_prog"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+  echo "$as_me:$LINENO: result: $AWK" >&5
+echo "${ECHO_T}$AWK" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+  test -n "$AWK" && break
+done
+
+echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6
+set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,./+-,__p_,'`
+if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.make <<\_ACEOF
+all:
+	@echo 'ac_maketemp="$(MAKE)"'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=`
+if test -n "$ac_maketemp"; then
+  eval ac_cv_prog_make_${ac_make}_set=yes
+else
+  eval ac_cv_prog_make_${ac_make}_set=no
+fi
+rm -f conftest.make
+fi
+if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
+  echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+  SET_MAKE=
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+  SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+ # test to see if srcdir already configured
+if test "`cd $srcdir && pwd`" != "`pwd`" &&
+   test -f $srcdir/config.status; then
+  { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
+echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+  if (cygpath --version) >/dev/null 2>/dev/null; then
+    CYGPATH_W='cygpath -w'
+  else
+    CYGPATH_W=echo
+  fi
+fi
+
+
+# Define the identity of the package.
+ PACKAGE=libpng
+ VERSION=1.2.8-automake
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE "$PACKAGE"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define VERSION "$VERSION"
+_ACEOF
+
+# Some tools Automake needs.
+
+ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
+
+
+AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
+
+
+AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
+
+
+AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
+
+
+MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
+
+
+AMTAR=${AMTAR-"${am_missing_run}tar"}
+
+install_sh=${install_sh-"$am_aux_dir/install-sh"}
+
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'.  However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_STRIP+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  echo "$as_me:$LINENO: result: $STRIP" >&5
+echo "${ECHO_T}$STRIP" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+  test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":"
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
+echo "${ECHO_T}$ac_ct_STRIP" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+  STRIP=$ac_ct_STRIP
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+fi
+INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
+
+# We need awk for the "check" target.  The system "awk" is bad on
+# some platforms.
+
+
+
+
+          ac_config_headers="$ac_config_headers config.h"
+
+
+# Checks for programs.
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CC="${ac_tool_prefix}gcc"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+  ac_ct_CC=$CC
+  # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_CC="gcc"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+  CC=$ac_ct_CC
+else
+  CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CC="${ac_tool_prefix}cc"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+  ac_ct_CC=$CC
+  # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_CC="cc"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+  CC=$ac_ct_CC
+else
+  CC="$ac_cv_prog_CC"
+fi
+
+fi
+if test -z "$CC"; then
+  # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+  ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+       ac_prog_rejected=yes
+       continue
+     fi
+    ac_cv_prog_CC="cc"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+if test $ac_prog_rejected = yes; then
+  # We found a bogon in the path, so make sure we never use it.
+  set dummy $ac_cv_prog_CC
+  shift
+  if test $# != 0; then
+    # We chose a different compiler from the bogus one.
+    # However, it has the same basename, so the bogon will be chosen
+    # first if we set CC to just the basename; use the full file name.
+    shift
+    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+  fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$CC"; then
+  if test -n "$ac_tool_prefix"; then
+  for ac_prog in cl
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+    test -n "$CC" && break
+  done
+fi
+if test -z "$CC"; then
+  ac_ct_CC=$CC
+  for ac_prog in cl
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_CC="$ac_prog"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+  test -n "$ac_ct_CC" && break
+done
+
+  CC=$ac_ct_CC
+fi
+
+fi
+
+
+test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
+See \`config.log' for more details." >&5
+echo "$as_me: error: no acceptable C compiler found in \$PATH
+See \`config.log' for more details." >&2;}
+   { (exit 1); exit 1; }; }
+
+# Provide some information about the compiler.
+echo "$as_me:$LINENO:" \
+     "checking for C compiler version" >&5
+ac_compiler=`set X $ac_compile; echo $2`
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
+  (eval $ac_compiler --version </dev/null >&5) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
+  (eval $ac_compiler -v </dev/null >&5) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
+  (eval $ac_compiler -V </dev/null >&5) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }
+
+cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.exe b.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+echo "$as_me:$LINENO: checking for C compiler default output" >&5
+echo $ECHO_N "checking for C compiler default output... $ECHO_C" >&6
+ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5
+  (eval $ac_link_default) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
+  # Find the output, starting from the most likely.  This scheme is
+# not robust to junk in `.', hence go to wildcards (a.*) only as a last
+# resort.
+
+# Be careful to initialize this variable, since it used to be cached.
+# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile.
+ac_cv_exeext=
+# b.out is created by i960 compilers.
+for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out
+do
+  test -f "$ac_file" || continue
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj )
+        ;;
+    conftest.$ac_ext )
+        # This is the source file.
+        ;;
+    [ab].out )
+        # We found the default executable, but exeext='' is most
+        # certainly right.
+        break;;
+    *.* )
+        ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+        # FIXME: I believe we export ac_cv_exeext for Libtool,
+        # but it would be cool to find out if it's true.  Does anybody
+        # maintain Libtool? --akim.
+        export ac_cv_exeext
+        break;;
+    * )
+        break;;
+  esac
+done
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { echo "$as_me:$LINENO: error: C compiler cannot create executables
+See \`config.log' for more details." >&5
+echo "$as_me: error: C compiler cannot create executables
+See \`config.log' for more details." >&2;}
+   { (exit 77); exit 77; }; }
+fi
+
+ac_exeext=$ac_cv_exeext
+echo "$as_me:$LINENO: result: $ac_file" >&5
+echo "${ECHO_T}$ac_file" >&6
+
+# Check the compiler produces executables we can run.  If not, either
+# the compiler is broken, or we cross compile.
+echo "$as_me:$LINENO: checking whether the C compiler works" >&5
+echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6
+# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
+# If not cross compiling, check that we can run a simple program.
+if test "$cross_compiling" != yes; then
+  if { ac_try='./$ac_file'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+    cross_compiling=no
+  else
+    if test "$cross_compiling" = maybe; then
+	cross_compiling=yes
+    else
+	{ { echo "$as_me:$LINENO: error: cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details." >&2;}
+   { (exit 1); exit 1; }; }
+    fi
+  fi
+fi
+echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+
+rm -f a.out a.exe conftest$ac_cv_exeext b.out
+ac_clean_files=$ac_clean_files_save
+# Check the compiler produces executables we can run.  If not, either
+# the compiler is broken, or we cross compile.
+echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
+echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6
+echo "$as_me:$LINENO: result: $cross_compiling" >&5
+echo "${ECHO_T}$cross_compiling" >&6
+
+echo "$as_me:$LINENO: checking for suffix of executables" >&5
+echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
+  # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+  test -f "$ac_file" || continue
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;;
+    *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+          export ac_cv_exeext
+          break;;
+    * ) break;;
+  esac
+done
+else
+  { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details." >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+rm -f conftest$ac_cv_exeext
+echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
+echo "${ECHO_T}$ac_cv_exeext" >&6
+
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+echo "$as_me:$LINENO: checking for suffix of object files" >&5
+echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6
+if test "${ac_cv_objext+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.o conftest.obj
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
+  for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;;
+    *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+       break;;
+  esac
+done
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute suffix of object files: cannot compile
+See \`config.log' for more details." >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
+echo "${ECHO_T}$ac_cv_objext" >&6
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
+echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6
+if test "${ac_cv_c_compiler_gnu+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+#ifndef __GNUC__
+       choke me
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+         { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_compiler_gnu=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_compiler_gnu=no
+fi
+rm -f conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
+echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
+GCC=`test $ac_compiler_gnu = yes && echo yes`
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+CFLAGS="-g"
+echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
+echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
+if test "${ac_cv_prog_cc_g+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+         { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_prog_cc_g=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_prog_cc_g=no
+fi
+rm -f conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
+if test "$ac_test_CFLAGS" = set; then
+  CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+  if test "$GCC" = yes; then
+    CFLAGS="-g -O2"
+  else
+    CFLAGS="-g"
+  fi
+else
+  if test "$GCC" = yes; then
+    CFLAGS="-O2"
+  else
+    CFLAGS=
+  fi
+fi
+echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5
+echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6
+if test "${ac_cv_prog_cc_stdc+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_cv_prog_cc_stdc=no
+ac_save_CC=$CC
+cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <stdarg.h>
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+     char **p;
+     int i;
+{
+  return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+  char *s;
+  va_list v;
+  va_start (v,p);
+  s = g (p, va_arg (v,int));
+  va_end (v);
+  return s;
+}
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
+  ;
+  return 0;
+}
+_ACEOF
+# Don't try gcc -ansi; that turns off useful extensions and
+# breaks some systems' header files.
+# AIX			-qlanglvl=ansi
+# Ultrix and OSF/1	-std1
+# HP-UX 10.20 and later	-Ae
+# HP-UX older versions	-Aa -D_HPUX_SOURCE
+# SVR4			-Xc -D__EXTENSIONS__
+for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+  CC="$ac_save_CC $ac_arg"
+  rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+         { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_prog_cc_stdc=$ac_arg
+break
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.$ac_objext
+done
+rm -f conftest.$ac_ext conftest.$ac_objext
+CC=$ac_save_CC
+
+fi
+
+case "x$ac_cv_prog_cc_stdc" in
+  x|xno)
+    echo "$as_me:$LINENO: result: none needed" >&5
+echo "${ECHO_T}none needed" >&6 ;;
+  *)
+    echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6
+    CC="$CC $ac_cv_prog_cc_stdc" ;;
+esac
+
+# Some people use a C++ compiler to compile C.  Since we use `exit',
+# in C++ we need to declare it.  In case someone uses the same compiler
+# for both compiling C and C++ we need to have the C++ compiler decide
+# the declaration of exit, since it's the most demanding environment.
+cat >conftest.$ac_ext <<_ACEOF
+#ifndef __cplusplus
+  choke me
+#endif
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+         { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  for ac_declaration in \
+   ''\
+   '#include <stdlib.h>' \
+   'extern "C" void std::exit (int) throw (); using std::exit;' \
+   'extern "C" void std::exit (int); using std::exit;' \
+   'extern "C" void exit (int) throw ();' \
+   'extern "C" void exit (int);' \
+   'void exit (int);'
+do
+  cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <stdlib.h>
+$ac_declaration
+int
+main ()
+{
+exit (42);
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+         { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  :
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+continue
+fi
+rm -f conftest.$ac_objext conftest.$ac_ext
+  cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_declaration
+int
+main ()
+{
+exit (42);
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+         { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  break
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.$ac_objext conftest.$ac_ext
+done
+rm -f conftest*
+if test -n "$ac_declaration"; then
+  echo '#ifdef __cplusplus' >>confdefs.h
+  echo $ac_declaration      >>confdefs.h
+  echo '#endif'             >>confdefs.h
+fi
+
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.$ac_objext conftest.$ac_ext
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+rm -f .deps 2>/dev/null
+mkdir .deps 2>/dev/null
+if test -d .deps; then
+  DEPDIR=.deps
+else
+  # MS-DOS does not allow filenames that begin with a dot.
+  DEPDIR=_deps
+fi
+rmdir .deps 2>/dev/null
+
+
+          ac_config_commands="$ac_config_commands depfiles"
+
+
+am_make=${MAKE-make}
+cat > confinc << 'END'
+doit:
+	@echo done
+END
+# If we don't find an include directive, just comment out the code.
+echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
+echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# We grep out `Entering directory' and `Leaving directory'
+# messages which can occur if `w' ends up in MAKEFLAGS.
+# In particular we don't look at `^make:' because GNU make might
+# be invoked under some other name (usually "gmake"), in which
+# case it prints its new name instead of `make'.
+if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
+   am__include=include
+   am__quote=
+   _am_result=GNU
+fi
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+   echo '.include "confinc"' > confmf
+   if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
+      am__include=.include
+      am__quote="\""
+      _am_result=BSD
+   fi
+fi
+
+
+echo "$as_me:$LINENO: result: $_am_result" >&5
+echo "${ECHO_T}$_am_result" >&6
+rm -f confinc confmf
+
+# Check whether --enable-dependency-tracking or --disable-dependency-tracking was given.
+if test "${enable_dependency_tracking+set}" = set; then
+  enableval="$enable_dependency_tracking"
+
+fi;
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+fi
+
+
+if test "x$enable_dependency_tracking" != xno; then
+  AMDEP_TRUE=
+  AMDEP_FALSE='#'
+else
+  AMDEP_TRUE='#'
+  AMDEP_FALSE=
+fi
+
+
+
+
+depcc="$CC"   am_compiler_list=
+
+echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
+echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6
+if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named `D' -- because `-MD' means `put the output
+  # in D'.
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+
+  am_cv_CC_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+  fi
+  for depmode in $am_compiler_list; do
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    echo '#include "conftest.h"' > conftest.c
+    echo 'int i;' > conftest.h
+    echo "${am__include} ${am__quote}conftest.Po${am__quote}" > confmf
+
+    case $depmode in
+    nosideeffect)
+      # after this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    none) break ;;
+    esac
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.
+    if depmode=$depmode \
+       source=conftest.c object=conftest.o \
+       depfile=conftest.Po tmpdepfile=conftest.TPo \
+       $SHELL ./depcomp $depcc -c -o conftest.o conftest.c >/dev/null 2>&1 &&
+       grep conftest.h conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      am_cv_CC_dependencies_compiler_type=$depmode
+      break
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_CC_dependencies_compiler_type=none
+fi
+
+fi
+echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
+echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6
+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+
+
+
+if
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
+  am__fastdepCC_TRUE=
+  am__fastdepCC_FALSE='#'
+else
+  am__fastdepCC_TRUE='#'
+  am__fastdepCC_FALSE=
+fi
+
+
+echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6
+set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,./+-,__p_,'`
+if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.make <<\_ACEOF
+all:
+	@echo 'ac_maketemp="$(MAKE)"'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=`
+if test -n "$ac_maketemp"; then
+  eval ac_cv_prog_make_${ac_make}_set=yes
+else
+  eval ac_cv_prog_make_${ac_make}_set=no
+fi
+rm -f conftest.make
+fi
+if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
+  echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+  SET_MAKE=
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+  SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+# Check whether --enable-shared or --disable-shared was given.
+if test "${enable_shared+set}" = set; then
+  enableval="$enable_shared"
+  p=${PACKAGE-default}
+case $enableval in
+yes) enable_shared=yes ;;
+no) enable_shared=no ;;
+*)
+  enable_shared=no
+  # Look at the argument we got.  We use all the common list separators.
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+  for pkg in $enableval; do
+    if test "X$pkg" = "X$p"; then
+      enable_shared=yes
+    fi
+  done
+  IFS="$ac_save_ifs"
+  ;;
+esac
+else
+  enable_shared=yes
+fi;
+# Check whether --enable-static or --disable-static was given.
+if test "${enable_static+set}" = set; then
+  enableval="$enable_static"
+  p=${PACKAGE-default}
+case $enableval in
+yes) enable_static=yes ;;
+no) enable_static=no ;;
+*)
+  enable_static=no
+  # Look at the argument we got.  We use all the common list separators.
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+  for pkg in $enableval; do
+    if test "X$pkg" = "X$p"; then
+      enable_static=yes
+    fi
+  done
+  IFS="$ac_save_ifs"
+  ;;
+esac
+else
+  enable_static=yes
+fi;
+# Check whether --enable-fast-install or --disable-fast-install was given.
+if test "${enable_fast_install+set}" = set; then
+  enableval="$enable_fast_install"
+  p=${PACKAGE-default}
+case $enableval in
+yes) enable_fast_install=yes ;;
+no) enable_fast_install=no ;;
+*)
+  enable_fast_install=no
+  # Look at the argument we got.  We use all the common list separators.
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+  for pkg in $enableval; do
+    if test "X$pkg" = "X$p"; then
+      enable_fast_install=yes
+    fi
+  done
+  IFS="$ac_save_ifs"
+  ;;
+esac
+else
+  enable_fast_install=yes
+fi;
+# Make sure we can run config.sub.
+$ac_config_sub sun4 >/dev/null 2>&1 ||
+  { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
+echo "$as_me: error: cannot run $ac_config_sub" >&2;}
+   { (exit 1); exit 1; }; }
+
+echo "$as_me:$LINENO: checking build system type" >&5
+echo $ECHO_N "checking build system type... $ECHO_C" >&6
+if test "${ac_cv_build+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_cv_build_alias=$build_alias
+test -z "$ac_cv_build_alias" &&
+  ac_cv_build_alias=`$ac_config_guess`
+test -z "$ac_cv_build_alias" &&
+  { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
+echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
+   { (exit 1); exit 1; }; }
+ac_cv_build=`$ac_config_sub $ac_cv_build_alias` ||
+  { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5
+echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;}
+   { (exit 1); exit 1; }; }
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_build" >&5
+echo "${ECHO_T}$ac_cv_build" >&6
+build=$ac_cv_build
+build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+
+echo "$as_me:$LINENO: checking host system type" >&5
+echo $ECHO_N "checking host system type... $ECHO_C" >&6
+if test "${ac_cv_host+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_cv_host_alias=$host_alias
+test -z "$ac_cv_host_alias" &&
+  ac_cv_host_alias=$ac_cv_build_alias
+ac_cv_host=`$ac_config_sub $ac_cv_host_alias` ||
+  { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5
+echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;}
+   { (exit 1); exit 1; }; }
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_host" >&5
+echo "${ECHO_T}$ac_cv_host" >&6
+host=$ac_cv_host
+host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+
+# Find the correct PATH separator.  Usually this is `:', but
+# DJGPP uses `;' like DOS.
+if test "X${PATH_SEPARATOR+set}" != Xset; then
+  UNAME=${UNAME-`uname 2>/dev/null`}
+  case X$UNAME in
+    *-DOS) lt_cv_sys_path_separator=';' ;;
+    *)     lt_cv_sys_path_separator=':' ;;
+  esac
+  PATH_SEPARATOR=$lt_cv_sys_path_separator
+fi
+
+
+# Check whether --with-gnu-ld or --without-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then
+  withval="$with_gnu_ld"
+  test "$withval" = no || with_gnu_ld=yes
+else
+  with_gnu_ld=no
+fi;
+ac_prog=ld
+if test "$GCC" = yes; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  echo "$as_me:$LINENO: checking for ld used by GCC" >&5
+echo $ECHO_N "checking for ld used by GCC... $ECHO_C" >&6
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
+    # Accept absolute paths.
+    [\\/]* | [A-Za-z]:[\\/]*)
+      re_direlt='/[^/][^/]*/\.\./'
+      # Canonicalize the path of ld
+      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD="$ac_prog"
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test "$with_gnu_ld" = yes; then
+  echo "$as_me:$LINENO: checking for GNU ld" >&5
+echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6
+else
+  echo "$as_me:$LINENO: checking for non-GNU ld" >&5
+echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6
+fi
+if test "${lt_cv_path_LD+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -z "$LD"; then
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for ac_dir in $PATH; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      lt_cv_path_LD="$ac_dir/$ac_prog"
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some GNU ld's only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+	test "$with_gnu_ld" != no && break
+      else
+	test "$with_gnu_ld" != yes && break
+      fi
+    fi
+  done
+  IFS="$ac_save_ifs"
+else
+  lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
+
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+  echo "$as_me:$LINENO: result: $LD" >&5
+echo "${ECHO_T}$LD" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
+echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
+   { (exit 1); exit 1; }; }
+echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
+echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6
+if test "${lt_cv_prog_gnu_ld+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  # I'd rather use --version here, but apparently some GNU ld's only accept -v.
+if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
+  lt_cv_prog_gnu_ld=yes
+else
+  lt_cv_prog_gnu_ld=no
+fi
+fi
+echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
+echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+
+echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5
+echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6
+if test "${lt_cv_ld_reload_flag+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_cv_ld_reload_flag='-r'
+fi
+echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5
+echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6
+reload_flag=$lt_cv_ld_reload_flag
+test -n "$reload_flag" && reload_flag=" $reload_flag"
+
+echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5
+echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6
+if test "${lt_cv_path_NM+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$NM"; then
+  # Let the user override the test.
+  lt_cv_path_NM="$NM"
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
+    test -z "$ac_dir" && ac_dir=.
+    tmp_nm=$ac_dir/${ac_tool_prefix}nm
+    if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
+      # Check to see if the nm accepts a BSD-compat flag.
+      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+      #   nm: unknown option "B" ignored
+      # Tru64's nm complains that /dev/null is an invalid object file
+      if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
+	lt_cv_path_NM="$tmp_nm -B"
+	break
+      elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+	lt_cv_path_NM="$tmp_nm -p"
+	break
+      else
+	lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+	continue # so that we can try to find one that supports BSD flags
+      fi
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
+fi
+fi
+
+NM="$lt_cv_path_NM"
+echo "$as_me:$LINENO: result: $NM" >&5
+echo "${ECHO_T}$NM" >&6
+
+echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5
+echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6
+if test "${lt_cv_path_SED+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  # Loop through the user's path and test for sed and gsed.
+# Then use that list of sed's as ones to test for truncation.
+as_executable_p="test -f"
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_prog in sed gsed; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
+        _sed_list="$_sed_list $as_dir/$ac_prog$ac_exec_ext"
+      fi
+    done
+  done
+done
+
+  # Create a temporary directory, and hook for its removal unless debugging.
+$debug ||
+{
+  trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
+  trap '{ (exit 1); exit 1; }' 1 2 13 15
+}
+
+# Create a (secure) tmp directory for tmp files.
+: ${TMPDIR=/tmp}
+{
+  tmp=`(umask 077 && mktemp -d -q "$TMPDIR/sedXXXXXX") 2>/dev/null` &&
+  test -n "$tmp" && test -d "$tmp"
+}  ||
+{
+  tmp=$TMPDIR/sed$$-$RANDOM
+  (umask 077 && mkdir $tmp)
+} ||
+{
+   echo "$me: cannot create a temporary directory in $TMPDIR" >&2
+   { (exit 1); exit 1; }
+}
+  _max=0
+  _count=0
+  # Add /usr/xpg4/bin/sed as it is typically found on Solaris
+  # along with /bin/sed that truncates output.
+  for _sed in $_sed_list /usr/xpg4/bin/sed; do
+    test ! -f ${_sed} && break
+    cat /dev/null > "$tmp/sed.in"
+    _count=0
+    echo ${ECHO_N-$ac_n} "0123456789${ECHO_C-$ac_c}" >"$tmp/sed.in"
+    # Check for GNU sed and select it if it is found.
+    if "${_sed}" --version 2>&1 < /dev/null | egrep '(GNU)' > /dev/null; then
+      lt_cv_path_SED=${_sed}
+      break
+    fi
+    while true; do
+      cat "$tmp/sed.in" "$tmp/sed.in" >"$tmp/sed.tmp"
+      mv "$tmp/sed.tmp" "$tmp/sed.in"
+      cp "$tmp/sed.in" "$tmp/sed.nl"
+      echo >>"$tmp/sed.nl"
+      ${_sed} -e 's/a$//' < "$tmp/sed.nl" >"$tmp/sed.out" || break
+      cmp -s "$tmp/sed.out" "$tmp/sed.nl" || break
+      # 40000 chars as input seems more than enough
+      test $_count -gt 10 && break
+      _count=`expr $_count + 1`
+      if test $_count -gt $_max; then
+        _max=$_count
+        lt_cv_path_SED=$_sed
+      fi
+    done
+  done
+  rm -rf "$tmp"
+
+fi
+
+if test "X$SED" != "X"; then
+  lt_cv_path_SED=$SED
+else
+  SED=$lt_cv_path_SED
+fi
+echo "$as_me:$LINENO: result: $SED" >&5
+echo "${ECHO_T}$SED" >&6
+
+echo "$as_me:$LINENO: checking whether ln -s works" >&5
+echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6
+LN_S=$as_ln_s
+if test "$LN_S" = "ln -s"; then
+  echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+else
+  echo "$as_me:$LINENO: result: no, using $LN_S" >&5
+echo "${ECHO_T}no, using $LN_S" >&6
+fi
+
+echo "$as_me:$LINENO: checking how to recognise dependent libraries" >&5
+echo $ECHO_N "checking how to recognise dependent libraries... $ECHO_C" >&6
+if test "${lt_cv_deplibs_check_method+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given egrep regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix4* | aix5*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+beos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+bsdi4*)
+  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+  lt_cv_file_magic_cmd='/usr/bin/file -L'
+  lt_cv_file_magic_test_file=/shlib/libc.so
+  ;;
+
+cygwin* | mingw* | pw32*)
+  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+  lt_cv_file_magic_cmd='$OBJDUMP -f'
+  ;;
+
+darwin* | rhapsody*)
+  lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
+  lt_cv_file_magic_cmd='/usr/bin/file -L'
+  case "$host_os" in
+  rhapsody* | darwin1.[012])
+    lt_cv_file_magic_test_file=`echo /System/Library/Frameworks/System.framework/Versions/*/System | head -1`
+    ;;
+  *) # Darwin 1.3 on
+    lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
+    ;;
+  esac
+  ;;
+
+freebsd*)
+  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+    case $host_cpu in
+    i*86 )
+      # Not sure whether the presence of OpenBSD here was a mistake.
+      # Let's accept both of them until this is cleared up.
+      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'
+      lt_cv_file_magic_cmd=/usr/bin/file
+      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+      ;;
+    esac
+  else
+    lt_cv_deplibs_check_method=pass_all
+  fi
+  ;;
+
+gnu*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+hpux10.20*|hpux11*)
+  lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
+  lt_cv_file_magic_cmd=/usr/bin/file
+  lt_cv_file_magic_test_file=/usr/lib/libc.sl
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+  irix5* | nonstopux*)
+    # this will be overridden with pass_all, but let us keep it just in case
+    lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
+    ;;
+  *)
+    case $LD in
+    *-32|*"-32 ") libmagic=32-bit;;
+    *-n32|*"-n32 ") libmagic=N32;;
+    *-64|*"-64 ") libmagic=64-bit;;
+    *) libmagic=never-match;;
+    esac
+    # this will be overridden with pass_all, but let us keep it just in case
+    lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
+    ;;
+  esac
+  lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+# This must be Linux ELF.
+linux-gnu*)
+  case $host_cpu in
+  alpha* | hppa* | i*86 | mips | mipsel | powerpc* | sparc* | ia64*)
+    lt_cv_deplibs_check_method=pass_all ;;
+  *)
+    # glibc up to 2.1.1 does not perform some relocations on ARM
+    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;
+  esac
+  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
+  ;;
+
+netbsd*)
+  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+    lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$'
+  fi
+  ;;
+
+newos6*)
+  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
+  lt_cv_file_magic_cmd=/usr/bin/file
+  lt_cv_file_magic_test_file=/usr/lib/libnls.so
+  ;;
+
+openbsd*)
+  lt_cv_file_magic_cmd=/usr/bin/file
+  lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object'
+  else
+    lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library'
+  fi
+  ;;
+
+osf3* | osf4* | osf5*)
+  # this will be overridden with pass_all, but let us keep it just in case
+  lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
+  lt_cv_file_magic_test_file=/shlib/libc.so
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sco3.2v5*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+solaris*)
+  lt_cv_deplibs_check_method=pass_all
+  lt_cv_file_magic_test_file=/lib/libc.so
+  ;;
+
+sysv5uw[78]* | sysv4*uw2*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+  case $host_vendor in
+  motorola)
+    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+    ;;
+  ncr)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  sequent)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
+    ;;
+  sni)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
+    lt_cv_file_magic_test_file=/lib/libc.so
+    ;;
+  siemens)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  esac
+  ;;
+esac
+
+fi
+echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5
+echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+
+
+
+
+
+
+
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+echo "$as_me:$LINENO: checking command to parse $NM output" >&5
+echo $ECHO_N "checking command to parse $NM output... $ECHO_C" >&6
+if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[BCDEGRST]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
+
+# Transform the above into a raw symbol and a C symbol.
+symxfrm='\1 \2\3 \3'
+
+# Transform an extracted symbol line into a proper C declaration
+lt_cv_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+  symcode='[BCDT]'
+  ;;
+cygwin* | mingw* | pw32*)
+  symcode='[ABCDGISTW]'
+  ;;
+hpux*) # Its linker distinguishes data from code symbols
+  lt_cv_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+  lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
+  ;;
+irix* | nonstopux*)
+  symcode='[BCDEGRST]'
+  ;;
+osf*)
+  symcode='[BCDEGQRST]'
+  ;;
+solaris* | sysv5*)
+  symcode='[BDT]'
+  ;;
+sysv4)
+  symcode='[DFNSTU]'
+  ;;
+esac
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $host_os in
+mingw*)
+  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+  ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
+  symcode='[ABCDGISTW]'
+fi
+
+# Try without a prefix undercore, then with it.
+for ac_symprfx in "" "_"; do
+
+  # Write the raw and C identifiers.
+lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ 	]\($symcode$symcode*\)[ 	][ 	]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"
+
+  # Check to see that the pipe works correctly.
+  pipe_works=no
+  rm -f conftest*
+  cat > conftest.$ac_ext <<EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+EOF
+
+  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
+    # Now try to grab the symbols.
+    nlist=conftest.nm
+    if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5
+  (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && test -s "$nlist"; then
+      # Try sorting and uniquifying the output.
+      if sort "$nlist" | uniq > "$nlist"T; then
+	mv -f "$nlist"T "$nlist"
+      else
+	rm -f "$nlist"T
+      fi
+
+      # Make sure that we snagged all the symbols we need.
+      if egrep ' nm_test_var$' "$nlist" >/dev/null; then
+	if egrep ' nm_test_func$' "$nlist" >/dev/null; then
+	  cat <<EOF > conftest.$ac_ext
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+EOF
+	  # Now generate the symbol file.
+	  eval "$lt_cv_global_symbol_to_cdecl"' < "$nlist" >> conftest.$ac_ext'
+
+	  cat <<EOF >> conftest.$ac_ext
+#if defined (__STDC__) && __STDC__
+# define lt_ptr void *
+#else
+# define lt_ptr char *
+# define const
+#endif
+
+/* The mapping between symbol names and symbols. */
+const struct {
+  const char *name;
+  lt_ptr address;
+}
+lt_preloaded_symbols[] =
+{
+EOF
+	  sed "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (lt_ptr) \&\2},/" < "$nlist" >> conftest.$ac_ext
+	  cat <<\EOF >> conftest.$ac_ext
+  {0, (lt_ptr) 0}
+};
+
+#ifdef __cplusplus
+}
+#endif
+EOF
+	  # Now try linking the two files.
+	  mv conftest.$ac_objext conftstm.$ac_objext
+	  save_LIBS="$LIBS"
+	  save_CFLAGS="$CFLAGS"
+	  LIBS="conftstm.$ac_objext"
+	  CFLAGS="$CFLAGS$no_builtin_flag"
+	  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && test -s conftest$ac_exeext; then
+	    pipe_works=yes
+	  fi
+	  LIBS="$save_LIBS"
+	  CFLAGS="$save_CFLAGS"
+	else
+	  echo "cannot find nm_test_func in $nlist" >&5
+	fi
+      else
+	echo "cannot find nm_test_var in $nlist" >&5
+      fi
+    else
+      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
+    fi
+  else
+    echo "$progname: failed program was:" >&5
+    cat conftest.$ac_ext >&5
+  fi
+  rm -f conftest* conftst*
+
+  # Do not use the global_symbol_pipe unless it works.
+  if test "$pipe_works" = yes; then
+    break
+  else
+    lt_cv_sys_global_symbol_pipe=
+  fi
+done
+
+fi
+
+global_symbol_pipe="$lt_cv_sys_global_symbol_pipe"
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+  global_symbol_to_cdecl=
+  global_symbol_to_c_name_address=
+else
+  global_symbol_to_cdecl="$lt_cv_global_symbol_to_cdecl"
+  global_symbol_to_c_name_address="$lt_cv_global_symbol_to_c_name_address"
+fi
+if test -z "$global_symbol_pipe$global_symbol_to_cdec$global_symbol_to_c_name_address";
+then
+  echo "$as_me:$LINENO: result: failed" >&5
+echo "${ECHO_T}failed" >&6
+else
+  echo "$as_me:$LINENO: result: ok" >&5
+echo "${ECHO_T}ok" >&6
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
+echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+  CPP=
+fi
+if test -z "$CPP"; then
+  if test "${ac_cv_prog_CPP+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+      # Double quotes because CPP needs to be expanded
+    for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+    do
+      ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+                     Syntax error
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null; then
+  if test -s conftest.err; then
+    ac_cpp_err=$ac_c_preproc_warn_flag
+  else
+    ac_cpp_err=
+  fi
+else
+  ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+  :
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether non-existent headers
+  # can be detected and how.
+  cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null; then
+  if test -s conftest.err; then
+    ac_cpp_err=$ac_c_preproc_warn_flag
+  else
+    ac_cpp_err=
+  fi
+else
+  ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+  # Broken: success on invalid input.
+continue
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then
+  break
+fi
+
+    done
+    ac_cv_prog_CPP=$CPP
+
+fi
+  CPP=$ac_cv_prog_CPP
+else
+  ac_cv_prog_CPP=$CPP
+fi
+echo "$as_me:$LINENO: result: $CPP" >&5
+echo "${ECHO_T}$CPP" >&6
+ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+                     Syntax error
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null; then
+  if test -s conftest.err; then
+    ac_cpp_err=$ac_c_preproc_warn_flag
+  else
+    ac_cpp_err=
+  fi
+else
+  ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+  :
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether non-existent headers
+  # can be detected and how.
+  cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null; then
+  if test -s conftest.err; then
+    ac_cpp_err=$ac_c_preproc_warn_flag
+  else
+    ac_cpp_err=
+  fi
+else
+  ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+  # Broken: success on invalid input.
+continue
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then
+  :
+else
+  { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details." >&5
+echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details." >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+echo "$as_me:$LINENO: checking for egrep" >&5
+echo $ECHO_N "checking for egrep... $ECHO_C" >&6
+if test "${ac_cv_prog_egrep+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if echo a | (grep -E '(a|b)') >/dev/null 2>&1
+    then ac_cv_prog_egrep='grep -E'
+    else ac_cv_prog_egrep='egrep'
+    fi
+fi
+echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5
+echo "${ECHO_T}$ac_cv_prog_egrep" >&6
+ EGREP=$ac_cv_prog_egrep
+
+
+echo "$as_me:$LINENO: checking for ANSI C header files" >&5
+echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
+if test "${ac_cv_header_stdc+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+         { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_header_stdc=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_header_stdc=no
+fi
+rm -f conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+  cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "memchr" >/dev/null 2>&1; then
+  :
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+  cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "free" >/dev/null 2>&1; then
+  :
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+  if test "$cross_compiling" = yes; then
+  :
+else
+  cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <ctype.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+                   (('a' <= (c) && (c) <= 'i') \
+                     || ('j' <= (c) && (c) <= 'r') \
+                     || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+  int i;
+  for (i = 0; i < 256; i++)
+    if (XOR (islower (i), ISLOWER (i))
+        || toupper (i) != TOUPPER (i))
+      exit(2);
+  exit (0);
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  :
+else
+  echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+ac_cv_header_stdc=no
+fi
+rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+fi
+fi
+echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
+echo "${ECHO_T}$ac_cv_header_stdc" >&6
+if test $ac_cv_header_stdc = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define STDC_HEADERS 1
+_ACEOF
+
+fi
+
+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
+
+
+
+
+
+
+
+
+
+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+                  inttypes.h stdint.h unistd.h
+do
+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
+echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_includes_default
+
+#include <$ac_header>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+         { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  eval "$as_ac_Header=yes"
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+eval "$as_ac_Header=no"
+fi
+rm -f conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+if test `eval echo '${'$as_ac_Header'}'` = yes; then
+  cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+
+for ac_header in dlfcn.h
+do
+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+  echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+else
+  # Is the header compilable?
+echo "$as_me:$LINENO: checking $ac_header usability" >&5
+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_includes_default
+#include <$ac_header>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+         { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_header_compiler=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_header_compiler=no
+fi
+rm -f conftest.$ac_objext conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6
+
+# Is the header present?
+echo "$as_me:$LINENO: checking $ac_header presence" >&5
+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <$ac_header>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null; then
+  if test -s conftest.err; then
+    ac_cpp_err=$ac_c_preproc_warn_flag
+  else
+    ac_cpp_err=
+  fi
+else
+  ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+  ac_header_preproc=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+  ac_header_preproc=no
+fi
+rm -f conftest.err conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6
+
+# So?  What about this header?
+case $ac_header_compiler:$ac_header_preproc in
+  yes:no )
+    { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
+    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+    (
+      cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to bug-autoconf@gnu.org. ##
+## ------------------------------------ ##
+_ASBOX
+    ) |
+      sed "s/^/$as_me: WARNING:     /" >&2
+    ;;
+  no:yes )
+    { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
+    { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
+echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
+    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+    (
+      cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to bug-autoconf@gnu.org. ##
+## ------------------------------------ ##
+_ASBOX
+    ) |
+      sed "s/^/$as_me: WARNING:     /" >&2
+    ;;
+esac
+echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  eval "$as_ac_Header=$ac_header_preproc"
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+
+fi
+if test `eval echo '${'$as_ac_Header'}'` = yes; then
+  cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+
+
+
+
+# Only perform the check for file, if the check method requires it
+case $deplibs_check_method in
+file_magic*)
+  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+    echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5
+echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6
+if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  case $MAGIC_CMD in
+  /*)
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+  ?:/*)
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
+  ;;
+  *)
+  ac_save_MAGIC_CMD="$MAGIC_CMD"
+  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="/usr/bin:$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/${ac_tool_prefix}file; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    egrep "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  MAGIC_CMD="$ac_save_MAGIC_CMD"
+  ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
+echo "${ECHO_T}$MAGIC_CMD" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+  if test -n "$ac_tool_prefix"; then
+    echo "$as_me:$LINENO: checking for file" >&5
+echo $ECHO_N "checking for file... $ECHO_C" >&6
+if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  case $MAGIC_CMD in
+  /*)
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+  ?:/*)
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
+  ;;
+  *)
+  ac_save_MAGIC_CMD="$MAGIC_CMD"
+  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="/usr/bin:$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/file; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/file"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    egrep "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  MAGIC_CMD="$ac_save_MAGIC_CMD"
+  ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
+echo "${ECHO_T}$MAGIC_CMD" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+  else
+    MAGIC_CMD=:
+  fi
+fi
+
+  fi
+  ;;
+esac
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_RANLIB+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$RANLIB"; then
+  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+fi
+fi
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+  echo "$as_me:$LINENO: result: $RANLIB" >&5
+echo "${ECHO_T}$RANLIB" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_RANLIB"; then
+  ac_ct_RANLIB=$RANLIB
+  # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$ac_ct_RANLIB"; then
+  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_RANLIB="ranlib"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+  test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":"
+fi
+fi
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+  echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
+echo "${ECHO_T}$ac_ct_RANLIB" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+  RANLIB=$ac_ct_RANLIB
+else
+  RANLIB="$ac_cv_prog_RANLIB"
+fi
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_STRIP+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  echo "$as_me:$LINENO: result: $STRIP" >&5
+echo "${ECHO_T}$STRIP" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+  test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":"
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
+echo "${ECHO_T}$ac_ct_STRIP" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+  STRIP=$ac_ct_STRIP
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+
+enable_dlopen=no
+enable_win32_dll=no
+
+# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then
+  enableval="$enable_libtool_lock"
+
+fi;
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+*-*-irix6*)
+  # Find out which ABI we are using.
+  echo '#line 4610 "configure"' > conftest.$ac_ext
+  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
+    case `/usr/bin/file conftest.$ac_objext` in
+    *32-bit*)
+      LD="${LD-ld} -32"
+      ;;
+    *N32*)
+      LD="${LD-ld} -n32"
+      ;;
+    *64-bit*)
+      LD="${LD-ld} -64"
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+
+*-*-sco3.2v5*)
+  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+  SAVE_CFLAGS="$CFLAGS"
+  CFLAGS="$CFLAGS -belf"
+  echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5
+echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6
+if test "${lt_cv_cc_needs_belf+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+
+     ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+     cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+         { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  lt_cv_cc_needs_belf=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+lt_cv_cc_needs_belf=no
+fi
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+     ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+fi
+echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5
+echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6
+  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+    CFLAGS="$SAVE_CFLAGS"
+  fi
+  ;;
+
+
+esac
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='sed -e s/^X//'
+sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Constants:
+rm="rm -f"
+
+# Global variables:
+default_ofile=libtool
+can_build_shared=yes
+
+# All known linkers require a `.a' archive for static linking (except M$VC,
+# which needs '.lib').
+libext=a
+ltmain="$ac_aux_dir/ltmain.sh"
+ofile="$default_ofile"
+with_gnu_ld="$lt_cv_prog_gnu_ld"
+need_locks="$enable_libtool_lock"
+
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
+
+# Set sane defaults for various variables
+test -z "$AR" && AR=ar
+test -z "$AR_FLAGS" && AR_FLAGS=cru
+test -z "$AS" && AS=as
+test -z "$CC" && CC=cc
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+test -z "$LD" && LD=ld
+test -z "$LN_S" && LN_S="ln -s"
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+test -z "$NM" && NM=nm
+test -z "$OBJDUMP" && OBJDUMP=objdump
+test -z "$RANLIB" && RANLIB=:
+test -z "$STRIP" && STRIP=:
+test -z "$ac_objext" && ac_objext=o
+
+if test x"$host" != x"$build"; then
+  ac_tool_prefix=${host_alias}-
+else
+  ac_tool_prefix=
+fi
+
+# Transform linux* to *-*-linux-gnu*, to support old configure scripts.
+case $host_os in
+linux-gnu*) ;;
+linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'`
+esac
+
+case $host_os in
+aix3*)
+  # AIX sometimes has problems with the GCC collect2 program.  For some
+  # reason, if we set the COLLECT_NAMES environment variable, the problems
+  # vanish in a puff of smoke.
+  if test "X${COLLECT_NAMES+set}" != Xset; then
+    COLLECT_NAMES=
+    export COLLECT_NAMES
+  fi
+  ;;
+esac
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+  case $host_os in
+  openbsd*)
+    old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds"
+    ;;
+  *)
+    old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
+    ;;
+  esac
+  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+fi
+
+# Allow CC to be a program name with arguments.
+set dummy $CC
+compiler="$2"
+
+echo "$as_me:$LINENO: checking for objdir" >&5
+echo $ECHO_N "checking for objdir... $ECHO_C" >&6
+rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+  objdir=.libs
+else
+  # MS-DOS does not allow filenames that begin with a dot.
+  objdir=_libs
+fi
+rmdir .libs 2>/dev/null
+echo "$as_me:$LINENO: result: $objdir" >&5
+echo "${ECHO_T}$objdir" >&6
+
+
+
+# Check whether --with-pic or --without-pic was given.
+if test "${with_pic+set}" = set; then
+  withval="$with_pic"
+  pic_mode="$withval"
+else
+  pic_mode=default
+fi;
+test -z "$pic_mode" && pic_mode=default
+
+# We assume here that the value for lt_cv_prog_cc_pic will not be cached
+# in isolation, and that seeing it set (from the cache) indicates that
+# the associated values are set (in the cache) correctly too.
+echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
+echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
+if test "${lt_cv_prog_cc_pic+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+   lt_cv_prog_cc_pic=
+  lt_cv_prog_cc_shlib=
+  lt_cv_prog_cc_wl=
+  lt_cv_prog_cc_static=
+  lt_cv_prog_cc_no_builtin=
+  lt_cv_prog_cc_can_build_shared=$can_build_shared
+
+  if test "$GCC" = yes; then
+    lt_cv_prog_cc_wl='-Wl,'
+    lt_cv_prog_cc_static='-static'
+
+    case $host_os in
+    aix*)
+      # Below there is a dirty hack to force normal static linking with -ldl
+      # The problem is because libdl dynamically linked with both libc and
+      # libC (AIX C++ library), which obviously doesn't included in libraries
+      # list by gcc. This cause undefined symbols with -static flags.
+      # This hack allows C programs to be linked with "-static -ldl", but
+      # not sure about C++ programs.
+      lt_cv_prog_cc_static="$lt_cv_prog_cc_static ${lt_cv_prog_cc_wl}-lC"
+      ;;
+    amigaos*)
+      # FIXME: we need at least 68020 code to build shared libraries, but
+      # adding the `-m68020' flag to GCC prevents building anything better,
+      # like `-m68040'.
+      lt_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4'
+      ;;
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      lt_cv_prog_cc_pic='-fno-common'
+      ;;
+    cygwin* | mingw* | pw32* | os2*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      lt_cv_prog_cc_pic='-DDLL_EXPORT'
+      ;;
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	 lt_cv_prog_cc_pic=-Kconform_pic
+      fi
+      ;;
+    *)
+      lt_cv_prog_cc_pic='-fPIC'
+      ;;
+    esac
+  else
+    # PORTME Check for PIC flags for the system compiler.
+    case $host_os in
+    aix3* | aix4* | aix5*)
+      lt_cv_prog_cc_wl='-Wl,'
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_cv_prog_cc_static='-Bstatic'
+      else
+	lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp'
+      fi
+      ;;
+
+    hpux9* | hpux10* | hpux11*)
+      # Is there a better lt_cv_prog_cc_static that works with the bundled CC?
+      lt_cv_prog_cc_wl='-Wl,'
+      lt_cv_prog_cc_static="${lt_cv_prog_cc_wl}-a ${lt_cv_prog_cc_wl}archive"
+      lt_cv_prog_cc_pic='+Z'
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      lt_cv_prog_cc_wl='-Wl,'
+      lt_cv_prog_cc_static='-non_shared'
+      # PIC (with -KPIC) is the default.
+      ;;
+
+    cygwin* | mingw* | pw32* | os2*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      lt_cv_prog_cc_pic='-DDLL_EXPORT'
+      ;;
+
+    newsos6)
+      lt_cv_prog_cc_pic='-KPIC'
+      lt_cv_prog_cc_static='-Bstatic'
+      ;;
+
+    osf3* | osf4* | osf5*)
+      # All OSF/1 code is PIC.
+      lt_cv_prog_cc_wl='-Wl,'
+      lt_cv_prog_cc_static='-non_shared'
+      ;;
+
+    sco3.2v5*)
+      lt_cv_prog_cc_pic='-Kpic'
+      lt_cv_prog_cc_static='-dn'
+      lt_cv_prog_cc_shlib='-belf'
+      ;;
+
+    solaris*)
+      lt_cv_prog_cc_pic='-KPIC'
+      lt_cv_prog_cc_static='-Bstatic'
+      lt_cv_prog_cc_wl='-Wl,'
+      ;;
+
+    sunos4*)
+      lt_cv_prog_cc_pic='-PIC'
+      lt_cv_prog_cc_static='-Bstatic'
+      lt_cv_prog_cc_wl='-Qoption ld '
+      ;;
+
+    sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+      lt_cv_prog_cc_pic='-KPIC'
+      lt_cv_prog_cc_static='-Bstatic'
+      lt_cv_prog_cc_wl='-Wl,'
+      ;;
+
+    uts4*)
+      lt_cv_prog_cc_pic='-pic'
+      lt_cv_prog_cc_static='-Bstatic'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec ;then
+	lt_cv_prog_cc_pic='-Kconform_pic'
+	lt_cv_prog_cc_static='-Bstatic'
+      fi
+      ;;
+
+    *)
+      lt_cv_prog_cc_can_build_shared=no
+      ;;
+    esac
+  fi
+
+fi
+
+if test -z "$lt_cv_prog_cc_pic"; then
+  echo "$as_me:$LINENO: result: none" >&5
+echo "${ECHO_T}none" >&6
+else
+  echo "$as_me:$LINENO: result: $lt_cv_prog_cc_pic" >&5
+echo "${ECHO_T}$lt_cv_prog_cc_pic" >&6
+
+  # Check to make sure the pic_flag actually works.
+  echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_cv_prog_cc_pic works" >&5
+echo $ECHO_N "checking if $compiler PIC flag $lt_cv_prog_cc_pic works... $ECHO_C" >&6
+  if test "${lt_cv_prog_cc_pic_works+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+      save_CFLAGS="$CFLAGS"
+    CFLAGS="$CFLAGS $lt_cv_prog_cc_pic -DPIC"
+    cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+         { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+        case $host_os in
+      hpux9* | hpux10* | hpux11*)
+	# On HP-UX, both CC and GCC only warn that PIC is supported... then
+	# they create non-PIC objects.  So, if there were any warnings, we
+	# assume that PIC is not supported.
+	if test -s conftest.err; then
+	  lt_cv_prog_cc_pic_works=no
+	else
+	  lt_cv_prog_cc_pic_works=yes
+	fi
+	;;
+      *)
+	lt_cv_prog_cc_pic_works=yes
+	;;
+      esac
+
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+      lt_cv_prog_cc_pic_works=no
+
+fi
+rm -f conftest.$ac_objext conftest.$ac_ext
+    CFLAGS="$save_CFLAGS"
+
+fi
+
+
+  if test "X$lt_cv_prog_cc_pic_works" = Xno; then
+    lt_cv_prog_cc_pic=
+    lt_cv_prog_cc_can_build_shared=no
+  else
+    lt_cv_prog_cc_pic=" $lt_cv_prog_cc_pic"
+  fi
+
+  echo "$as_me:$LINENO: result: $lt_cv_prog_cc_pic_works" >&5
+echo "${ECHO_T}$lt_cv_prog_cc_pic_works" >&6
+fi
+
+# Check for any special shared library compilation flags.
+if test -n "$lt_cv_prog_cc_shlib"; then
+  { echo "$as_me:$LINENO: WARNING: \`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries" >&5
+echo "$as_me: WARNING: \`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries" >&2;}
+  if echo "$old_CC $old_CFLAGS " | egrep -e "[ 	]$lt_cv_prog_cc_shlib[ 	]" >/dev/null; then :
+  else
+   { echo "$as_me:$LINENO: WARNING: add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&5
+echo "$as_me: WARNING: add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&2;}
+    lt_cv_prog_cc_can_build_shared=no
+  fi
+fi
+
+echo "$as_me:$LINENO: checking if $compiler static flag $lt_cv_prog_cc_static works" >&5
+echo $ECHO_N "checking if $compiler static flag $lt_cv_prog_cc_static works... $ECHO_C" >&6
+if test "${lt_cv_prog_cc_static_works+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+    lt_cv_prog_cc_static_works=no
+  save_LDFLAGS="$LDFLAGS"
+  LDFLAGS="$LDFLAGS $lt_cv_prog_cc_static"
+  cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+         { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  lt_cv_prog_cc_static_works=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+  LDFLAGS="$save_LDFLAGS"
+
+fi
+
+
+# Belt *and* braces to stop my trousers falling down:
+test "X$lt_cv_prog_cc_static_works" = Xno && lt_cv_prog_cc_static=
+echo "$as_me:$LINENO: result: $lt_cv_prog_cc_static_works" >&5
+echo "${ECHO_T}$lt_cv_prog_cc_static_works" >&6
+
+pic_flag="$lt_cv_prog_cc_pic"
+special_shlib_compile_flags="$lt_cv_prog_cc_shlib"
+wl="$lt_cv_prog_cc_wl"
+link_static_flag="$lt_cv_prog_cc_static"
+no_builtin_flag="$lt_cv_prog_cc_no_builtin"
+can_build_shared="$lt_cv_prog_cc_can_build_shared"
+
+
+# Check to see if options -o and -c are simultaneously supported by compiler
+echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
+echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6
+if test "${lt_cv_compiler_c_o+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+$rm -r conftest 2>/dev/null
+mkdir conftest
+cd conftest
+echo "int some_variable = 0;" > conftest.$ac_ext
+mkdir out
+# According to Tom Tromey, Ian Lance Taylor reported there are C compilers
+# that will create temporary files in the current directory regardless of
+# the output directory.  Thus, making CWD read-only will cause this test
+# to fail, enabling locking or at least warning the user not to do parallel
+# builds.
+chmod -w .
+save_CFLAGS="$CFLAGS"
+CFLAGS="$CFLAGS -o out/conftest2.$ac_objext"
+compiler_c_o=no
+if { (eval echo configure:5139: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then
+  # The compiler can only warn and ignore the option if not recognized
+  # So say no if there are warnings
+  if test -s out/conftest.err; then
+    lt_cv_compiler_c_o=no
+  else
+    lt_cv_compiler_c_o=yes
+  fi
+else
+  # Append any errors to the config.log.
+  cat out/conftest.err 1>&5
+  lt_cv_compiler_c_o=no
+fi
+CFLAGS="$save_CFLAGS"
+chmod u+w .
+$rm conftest* out/*
+rmdir out
+cd ..
+rmdir conftest
+$rm -r conftest 2>/dev/null
+
+fi
+
+compiler_c_o=$lt_cv_compiler_c_o
+echo "$as_me:$LINENO: result: $compiler_c_o" >&5
+echo "${ECHO_T}$compiler_c_o" >&6
+
+if test x"$compiler_c_o" = x"yes"; then
+  # Check to see if we can write to a .lo
+  echo "$as_me:$LINENO: checking if $compiler supports -c -o file.lo" >&5
+echo $ECHO_N "checking if $compiler supports -c -o file.lo... $ECHO_C" >&6
+  if test "${lt_cv_compiler_o_lo+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+  lt_cv_compiler_o_lo=no
+  save_CFLAGS="$CFLAGS"
+  CFLAGS="$CFLAGS -c -o conftest.lo"
+  save_objext="$ac_objext"
+  ac_objext=lo
+  cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+int some_variable = 0;
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+         { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+      # The compiler can only warn and ignore the option if not recognized
+    # So say no if there are warnings
+    if test -s conftest.err; then
+      lt_cv_compiler_o_lo=no
+    else
+      lt_cv_compiler_o_lo=yes
+    fi
+
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.$ac_objext conftest.$ac_ext
+  ac_objext="$save_objext"
+  CFLAGS="$save_CFLAGS"
+
+fi
+
+  compiler_o_lo=$lt_cv_compiler_o_lo
+  echo "$as_me:$LINENO: result: $compiler_o_lo" >&5
+echo "${ECHO_T}$compiler_o_lo" >&6
+else
+  compiler_o_lo=no
+fi
+
+# Check to see if we can do hard links to lock some files if needed
+hard_links="nottested"
+if test "$compiler_c_o" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
+echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6
+  hard_links=yes
+  $rm conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  echo "$as_me:$LINENO: result: $hard_links" >&5
+echo "${ECHO_T}$hard_links" >&6
+  if test "$hard_links" = no; then
+    { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+
+if test "$GCC" = yes; then
+  # Check to see if options -fno-rtti -fno-exceptions are supported by compiler
+  echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6
+  echo "int some_variable = 0;" > conftest.$ac_ext
+  save_CFLAGS="$CFLAGS"
+  CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext"
+  compiler_rtti_exceptions=no
+  cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+int some_variable = 0;
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+         { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+      # The compiler can only warn and ignore the option if not recognized
+    # So say no if there are warnings
+    if test -s conftest.err; then
+      compiler_rtti_exceptions=no
+    else
+      compiler_rtti_exceptions=yes
+    fi
+
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.$ac_objext conftest.$ac_ext
+  CFLAGS="$save_CFLAGS"
+  echo "$as_me:$LINENO: result: $compiler_rtti_exceptions" >&5
+echo "${ECHO_T}$compiler_rtti_exceptions" >&6
+
+  if test "$compiler_rtti_exceptions" = "yes"; then
+    no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions'
+  else
+    no_builtin_flag=' -fno-builtin'
+  fi
+fi
+
+# See if the linker supports building shared libraries.
+echo "$as_me:$LINENO: checking whether the linker ($LD) supports shared libraries" >&5
+echo $ECHO_N "checking whether the linker ($LD) supports shared libraries... $ECHO_C" >&6
+
+allow_undefined_flag=
+no_undefined_flag=
+need_lib_prefix=unknown
+need_version=unknown
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+archive_cmds=
+archive_expsym_cmds=
+old_archive_from_new_cmds=
+old_archive_from_expsyms_cmds=
+export_dynamic_flag_spec=
+whole_archive_flag_spec=
+thread_safe_flag_spec=
+hardcode_into_libs=no
+hardcode_libdir_flag_spec=
+hardcode_libdir_separator=
+hardcode_direct=no
+hardcode_minus_L=no
+hardcode_shlibpath_var=unsupported
+runpath_var=
+link_all_deplibs=unknown
+always_export_symbols=no
+export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols'
+# include_expsyms should be a list of space-separated symbols to be *always*
+# included in the symbol list
+include_expsyms=
+# exclude_expsyms can be an egrep regular expression of symbols to exclude
+# it will be wrapped by ` (' and `)$', so one must not match beginning or
+# end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+# as well as any symbol that contains `d'.
+exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
+# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+# platforms (ab)use it in PIC code, but their linkers get confused if
+# the symbol is explicitly referenced.  Since portable code cannot
+# rely on this symbol name, it's probably fine to never include it in
+# preloaded symbol tables.
+extract_expsyms_cmds=
+
+case $host_os in
+cygwin* | mingw* | pw32*)
+  # FIXME: the MSVC++ port hasn't been tested in a loooong time
+  # When not using gcc, we currently assume that we are using
+  # Microsoft Visual C++.
+  if test "$GCC" != yes; then
+    with_gnu_ld=no
+  fi
+  ;;
+openbsd*)
+  with_gnu_ld=no
+  ;;
+esac
+
+ld_shlibs=yes
+if test "$with_gnu_ld" = yes; then
+  # If archive_cmds runs LD, not CC, wlarc should be empty
+  wlarc='${wl}'
+
+  # See if GNU ld supports shared libraries.
+  case $host_os in
+  aix3* | aix4* | aix5*)
+    # On AIX, the GNU linker is very broken
+    # Note:Check GNU linker on AIX 5-IA64 when/if it becomes available.
+    ld_shlibs=no
+    cat <<EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to modify your PATH
+*** so that a non-GNU linker is found, and then restart.
+
+EOF
+    ;;
+
+  amigaos*)
+    archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+    hardcode_libdir_flag_spec='-L$libdir'
+    hardcode_minus_L=yes
+
+    # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
+    # that the semantics of dynamic libraries on AmigaOS, at least up
+    # to version 4, is to share data among multiple programs linked
+    # with the same dynamic library.  Since this doesn't match the
+    # behavior of shared libraries on other platforms, we can use
+    # them.
+    ld_shlibs=no
+    ;;
+
+  beos*)
+    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+      allow_undefined_flag=unsupported
+      # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+      # support --undefined.  This deserves some investigation.  FIXME
+      archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+    else
+      ld_shlibs=no
+    fi
+    ;;
+
+  cygwin* | mingw* | pw32*)
+    # hardcode_libdir_flag_spec is actually meaningless, as there is
+    # no search path for DLLs.
+    hardcode_libdir_flag_spec='-L$libdir'
+    allow_undefined_flag=unsupported
+    always_export_symbols=yes
+
+    extract_expsyms_cmds='test -f $output_objdir/impgen.c || \
+      sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //;s/^# *$//; p; }" -e d < $''0 > $output_objdir/impgen.c~
+      test -f $output_objdir/impgen.exe || (cd $output_objdir && \
+      if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \
+      else $CC -o impgen impgen.c ; fi)~
+      $output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def'
+
+    old_archive_from_expsyms_cmds='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib'
+
+    # cygwin and mingw dlls have different entry points and sets of symbols
+    # to exclude.
+    # FIXME: what about values for MSVC?
+    dll_entry=__cygwin_dll_entry@12
+    dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~
+    case $host_os in
+    mingw*)
+      # mingw values
+      dll_entry=_DllMainCRTStartup@12
+      dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~
+      ;;
+    esac
+
+    # mingw and cygwin differ, and it's simplest to just exclude the union
+    # of the two symbol sets.
+    dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12
+
+    # recent cygwin and mingw systems supply a stub DllMain which the user
+    # can override, but on older systems we have to supply one (in ltdll.c)
+    if test "x$lt_cv_need_dllmain" = "xyes"; then
+      ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext "
+      ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~
+	test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~'
+    else
+      ltdll_obj=
+      ltdll_cmds=
+    fi
+
+    # Extract the symbol export list from an `--export-all' def file,
+    # then regenerate the def file from the symbol export list, so that
+    # the compiled dll only exports the symbol export list.
+    # Be careful not to strip the DATA tag left be newer dlltools.
+    export_symbols_cmds="$ltdll_cmds"'
+      $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~
+      sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols'
+
+    # If the export-symbols file already is a .def file (1st line
+    # is EXPORTS), use it as is.
+    # If DATA tags from a recent dlltool are present, honour them!
+    archive_expsym_cmds='if test "x`sed 1q $export_symbols`" = xEXPORTS; then
+	cp $export_symbols $output_objdir/$soname-def;
+      else
+	echo EXPORTS > $output_objdir/$soname-def;
+	_lt_hint=1;
+	cat $export_symbols | while read symbol; do
+	 set dummy \$symbol;
+	 case \$# in
+	   2) echo "   \$2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;;
+	   4) echo "   \$2 \$3 \$4 ; " >> $output_objdir/$soname-def; _lt_hint=`expr \$_lt_hint - 1`;;
+	   *) echo "     \$2 @ \$_lt_hint \$3 ; " >> $output_objdir/$soname-def;;
+	 esac;
+	 _lt_hint=`expr 1 + \$_lt_hint`;
+	done;
+      fi~
+      '"$ltdll_cmds"'
+      $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
+      $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~
+      $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
+      $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~
+      $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags'
+    ;;
+
+  netbsd*)
+    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+      archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+      wlarc=
+    else
+      archive_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+    fi
+    ;;
+
+  solaris* | sysv5*)
+    if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
+      ld_shlibs=no
+      cat <<EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+EOF
+    elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+    else
+      ld_shlibs=no
+    fi
+    ;;
+
+  sunos4*)
+    archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+    wlarc=
+    hardcode_direct=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  *)
+    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+    else
+      ld_shlibs=no
+    fi
+    ;;
+  esac
+
+  if test "$ld_shlibs" = yes; then
+    runpath_var=LD_RUN_PATH
+    hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
+    export_dynamic_flag_spec='${wl}--export-dynamic'
+    case $host_os in
+    cygwin* | mingw* | pw32*)
+      # dlltool doesn't understand --whole-archive et. al.
+      whole_archive_flag_spec=
+      ;;
+    *)
+      # ancient GNU ld didn't support --whole-archive et. al.
+      if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then
+	whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+      else
+	whole_archive_flag_spec=
+      fi
+      ;;
+    esac
+  fi
+else
+  # PORTME fill in a description of your system's linker (not GNU ld)
+  case $host_os in
+  aix3*)
+    allow_undefined_flag=unsupported
+    always_export_symbols=yes
+    archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+    # Note: this linker hardcodes the directories in LIBPATH if there
+    # are no directories specified by -L.
+    hardcode_minus_L=yes
+    if test "$GCC" = yes && test -z "$link_static_flag"; then
+      # Neither direct hardcoding nor static linking is supported with a
+      # broken collect2.
+      hardcode_direct=unsupported
+    fi
+    ;;
+
+  aix4* | aix5*)
+    if test "$host_cpu" = ia64; then
+      # On IA64, the linker does run time linking by default, so we don't
+      # have to do anything special.
+      aix_use_runtimelinking=no
+      exp_sym_flag='-Bexport'
+      no_entry_flag=""
+    else
+      aix_use_runtimelinking=no
+
+      # Test if we are trying to use run time linking or normal
+      # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+      # need to do runtime linking.
+      case $host_os in aix4.[23]|aix4.[23].*|aix5*)
+	for ld_flag in $LDFLAGS; do
+	  case $ld_flag in
+	  *-brtl*)
+	    aix_use_runtimelinking=yes
+	    break
+	  ;;
+	  esac
+	done
+      esac
+
+      exp_sym_flag='-bexport'
+      no_entry_flag='-bnoentry'
+    fi
+
+    # When large executables or shared objects are built, AIX ld can
+    # have problems creating the table of contents.  If linking a library
+    # or program results in "error TOC overflow" add -mminimal-toc to
+    # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+    # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+    hardcode_direct=yes
+    archive_cmds=''
+    hardcode_libdir_separator=':'
+    if test "$GCC" = yes; then
+      case $host_os in aix4.[012]|aix4.[012].*)
+	collect2name=`${CC} -print-prog-name=collect2`
+	if test -f "$collect2name" && \
+	  strings "$collect2name" | grep resolve_lib_name >/dev/null
+	then
+	  # We have reworked collect2
+	  hardcode_direct=yes
+	else
+	  # We have old collect2
+	  hardcode_direct=unsupported
+	  # It fails to find uninstalled libraries when the uninstalled
+	  # path is not listed in the libpath.  Setting hardcode_minus_L
+	  # to unsupported forces relinking
+	  hardcode_minus_L=yes
+	  hardcode_libdir_flag_spec='-L$libdir'
+	  hardcode_libdir_separator=
+	fi
+      esac
+
+      shared_flag='-shared'
+    else
+      # not using gcc
+      if test "$host_cpu" = ia64; then
+	shared_flag='${wl}-G'
+      else
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag='${wl}-G'
+	else
+	  shared_flag='${wl}-bM:SRE'
+	fi
+      fi
+    fi
+
+    # It seems that -bexpall can do strange things, so it is better to
+    # generate a list of symbols to export.
+    always_export_symbols=yes
+    if test "$aix_use_runtimelinking" = yes; then
+      # Warning - without using the other runtime loading flags (-brtl),
+      # -berok will link without error, but may produce a broken library.
+      allow_undefined_flag='-berok'
+      hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib'
+      archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+    else
+      if test "$host_cpu" = ia64; then
+	hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+	allow_undefined_flag="-z nodefs"
+	archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname ${wl}-h$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
+      else
+	hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib'
+	# Warning - without using the other run time loading flags,
+	# -berok will link without error, but may produce a broken library.
+	allow_undefined_flag='${wl}-berok'
+	# This is a bit strange, but is similar to how AIX traditionally builds
+	# it's shared libraries.
+	archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"' ~$AR -crlo $objdir/$libname$release.a $objdir/$soname'
+      fi
+    fi
+    ;;
+
+  amigaos*)
+    archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+    hardcode_libdir_flag_spec='-L$libdir'
+    hardcode_minus_L=yes
+    # see comment about different semantics on the GNU ld section
+    ld_shlibs=no
+    ;;
+
+  cygwin* | mingw* | pw32*)
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    # hardcode_libdir_flag_spec is actually meaningless, as there is
+    # no search path for DLLs.
+    hardcode_libdir_flag_spec=' '
+    allow_undefined_flag=unsupported
+    # Tell ltmain to make .lib files, not .a files.
+    libext=lib
+    # FIXME: Setting linknames here is a bad hack.
+    archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames='
+    # The linker will automatically build a .lib file if we build a DLL.
+    old_archive_from_new_cmds='true'
+    # FIXME: Should let the user specify the lib program.
+    old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs'
+    fix_srcfile_path='`cygpath -w "$srcfile"`'
+    ;;
+
+  darwin* | rhapsody*)
+    case "$host_os" in
+    rhapsody* | darwin1.[012])
+      allow_undefined_flag='-undefined suppress'
+      ;;
+    *) # Darwin 1.3 on
+      allow_undefined_flag='-flat_namespace -undefined suppress'
+      ;;
+    esac
+    # FIXME: Relying on posixy $() will cause problems for
+    #        cross-compilation, but unfortunately the echo tests do not
+    #        yet detect zsh echo's removal of \ escapes.  Also zsh mangles
+    #	     `"' quotes if we put them in here... so don't!
+    archive_cmds='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs && $CC $(test .$module = .yes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib ${lib}-master.o $deplibs$linker_flags $(test .$module != .yes && echo -install_name $rpath/$soname $verstring)'
+    # We need to add '_' to the symbols in $export_symbols first
+    #archive_expsym_cmds="$archive_cmds"' && strip -s $export_symbols'
+    hardcode_direct=yes
+    hardcode_shlibpath_var=no
+    whole_archive_flag_spec='-all_load $convenience'
+    ;;
+
+  freebsd1*)
+    ld_shlibs=no
+    ;;
+
+  # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+  # support.  Future versions do this automatically, but an explicit c++rt0.o
+  # does not break anything, and helps significantly (at the cost of a little
+  # extra space).
+  freebsd2.2*)
+    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+    hardcode_libdir_flag_spec='-R$libdir'
+    hardcode_direct=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+  freebsd2*)
+    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+    hardcode_direct=yes
+    hardcode_minus_L=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+  freebsd*)
+    archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+    hardcode_libdir_flag_spec='-R$libdir'
+    hardcode_direct=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  hpux9* | hpux10* | hpux11*)
+    case $host_os in
+    hpux9*) archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;;
+    *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ;;
+    esac
+    hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+    hardcode_libdir_separator=:
+    hardcode_direct=yes
+    hardcode_minus_L=yes # Not in the search PATH, but as the default
+			 # location of the library.
+    export_dynamic_flag_spec='${wl}-E'
+    ;;
+
+  irix5* | irix6* | nonstopux*)
+    if test "$GCC" = yes; then
+      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+    else
+      archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+      hardcode_libdir_flag_spec='-rpath $libdir'
+    fi
+    hardcode_libdir_separator=:
+    link_all_deplibs=yes
+    ;;
+
+  netbsd*)
+    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+    else
+      archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+    fi
+    hardcode_libdir_flag_spec='-R$libdir'
+    hardcode_direct=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  newsos6)
+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+    hardcode_direct=yes
+    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+    hardcode_libdir_separator=:
+    hardcode_shlibpath_var=no
+    ;;
+
+  openbsd*)
+    hardcode_direct=yes
+    hardcode_shlibpath_var=no
+    if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+      archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+      hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+      export_dynamic_flag_spec='${wl}-E'
+    else
+      case "$host_os" in
+      openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+	archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	hardcode_libdir_flag_spec='-R$libdir'
+        ;;
+      *)
+        archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+        hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+        ;;
+      esac
+    fi
+    ;;
+
+  os2*)
+    hardcode_libdir_flag_spec='-L$libdir'
+    hardcode_minus_L=yes
+    allow_undefined_flag=unsupported
+    archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+    old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+    ;;
+
+  osf3*)
+    if test "$GCC" = yes; then
+      allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+      archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+    else
+      allow_undefined_flag=' -expect_unresolved \*'
+      archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+    fi
+    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+    hardcode_libdir_separator=:
+    ;;
+
+  osf4* | osf5*)	# as osf3* with the addition of -msym flag
+    if test "$GCC" = yes; then
+      allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+      archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+    else
+      allow_undefined_flag=' -expect_unresolved \*'
+      archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+      archive_expsym_cmds='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
+      $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
+
+      #Both c and cxx compiler support -rpath directly
+      hardcode_libdir_flag_spec='-rpath $libdir'
+    fi
+    hardcode_libdir_separator=:
+    ;;
+
+  sco3.2v5*)
+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+    hardcode_shlibpath_var=no
+    runpath_var=LD_RUN_PATH
+    hardcode_runpath_var=yes
+    export_dynamic_flag_spec='${wl}-Bexport'
+    ;;
+
+  solaris*)
+    # gcc --version < 3.0 without binutils cannot create self contained
+    # shared libraries reliably, requiring libgcc.a to resolve some of
+    # the object symbols generated in some cases.  Libraries that use
+    # assert need libgcc.a to resolve __eprintf, for example.  Linking
+    # a copy of libgcc.a into every shared library to guarantee resolving
+    # such symbols causes other problems:  According to Tim Van Holder
+    # <tim.van.holder@pandora.be>, C++ libraries end up with a separate
+    # (to the application) exception stack for one thing.
+    no_undefined_flag=' -z defs'
+    if test "$GCC" = yes; then
+      case `$CC --version 2>/dev/null` in
+      [12].*)
+	cat <<EOF 1>&2
+
+*** Warning: Releases of GCC earlier than version 3.0 cannot reliably
+*** create self contained shared libraries on Solaris systems, without
+*** introducing a dependency on libgcc.a.  Therefore, libtool is disabling
+*** -no-undefined support, which will at least allow you to build shared
+*** libraries.  However, you may find that when you link such libraries
+*** into an application without using GCC, you have to manually add
+*** \`gcc --print-libgcc-file-name\` to the link command.  We urge you to
+*** upgrade to a newer version of GCC.  Another option is to rebuild your
+*** current GCC to use the GNU linker from GNU binutils 2.9.1 or newer.
+
+EOF
+        no_undefined_flag=
+	;;
+      esac
+    fi
+    # $CC -shared without GNU ld will not create a library from C++
+    # object files and a static libstdc++, better avoid it by now
+    archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+    archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
+    hardcode_libdir_flag_spec='-R$libdir'
+    hardcode_shlibpath_var=no
+    case $host_os in
+    solaris2.[0-5] | solaris2.[0-5].*) ;;
+    *) # Supported since Solaris 2.6 (maybe 2.5.1?)
+      whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;;
+    esac
+    link_all_deplibs=yes
+    ;;
+
+  sunos4*)
+    if test "x$host_vendor" = xsequent; then
+      # Use $CC to link under sequent, because it throws in some extra .o
+      # files that make .init and .fini sections work.
+      archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+    else
+      archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+    fi
+    hardcode_libdir_flag_spec='-L$libdir'
+    hardcode_direct=yes
+    hardcode_minus_L=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  sysv4)
+    case $host_vendor in
+      sni)
+        archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+        hardcode_direct=yes # is this really true???
+        ;;
+      siemens)
+        ## LD is ld it makes a PLAMLIB
+        ## CC just makes a GrossModule.
+        archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+        reload_cmds='$CC -r -o $output$reload_objs'
+        hardcode_direct=no
+        ;;
+      motorola)
+        archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+        hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+        ;;
+    esac
+    runpath_var='LD_RUN_PATH'
+    hardcode_shlibpath_var=no
+    ;;
+
+  sysv4.3*)
+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+    hardcode_shlibpath_var=no
+    export_dynamic_flag_spec='-Bexport'
+    ;;
+
+  sysv5*)
+    no_undefined_flag=' -z text'
+    # $CC -shared without GNU ld will not create a library from C++
+    # object files and a static libstdc++, better avoid it by now
+    archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+    archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
+    hardcode_libdir_flag_spec=
+    hardcode_shlibpath_var=no
+    runpath_var='LD_RUN_PATH'
+    ;;
+
+  uts4*)
+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+    hardcode_libdir_flag_spec='-L$libdir'
+    hardcode_shlibpath_var=no
+    ;;
+
+  dgux*)
+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+    hardcode_libdir_flag_spec='-L$libdir'
+    hardcode_shlibpath_var=no
+    ;;
+
+  sysv4*MP*)
+    if test -d /usr/nec; then
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_shlibpath_var=no
+      runpath_var=LD_RUN_PATH
+      hardcode_runpath_var=yes
+      ld_shlibs=yes
+    fi
+    ;;
+
+  sysv4.2uw2*)
+    archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+    hardcode_direct=yes
+    hardcode_minus_L=no
+    hardcode_shlibpath_var=no
+    hardcode_runpath_var=yes
+    runpath_var=LD_RUN_PATH
+    ;;
+
+  sysv5uw7* | unixware7*)
+    no_undefined_flag='${wl}-z ${wl}text'
+    if test "$GCC" = yes; then
+      archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+    else
+      archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+    fi
+    runpath_var='LD_RUN_PATH'
+    hardcode_shlibpath_var=no
+    ;;
+
+  *)
+    ld_shlibs=no
+    ;;
+  esac
+fi
+echo "$as_me:$LINENO: result: $ld_shlibs" >&5
+echo "${ECHO_T}$ld_shlibs" >&6
+test "$ld_shlibs" = no && can_build_shared=no
+
+# Check hardcoding attributes.
+echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
+echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
+hardcode_action=
+if test -n "$hardcode_libdir_flag_spec" || \
+   test -n "$runpath_var"; then
+
+  # We can hardcode non-existant directories.
+  if test "$hardcode_direct" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$hardcode_shlibpath_var" != no &&
+     test "$hardcode_minus_L" != no; then
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action=unsupported
+fi
+echo "$as_me:$LINENO: result: $hardcode_action" >&5
+echo "${ECHO_T}$hardcode_action" >&6
+
+striplib=
+old_striplib=
+echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5
+echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6
+if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
+  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+  echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+
+# PORTME Fill in your ld.so characteristics
+echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
+echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+
+case $host_os in
+aix3*)
+  version_type=linux
+  library_names_spec='${libname}${release}.so$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}.so$major'
+  ;;
+
+aix4* | aix5*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test "$host_cpu" = ia64; then
+    # AIX 5 supports IA64
+    library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so'
+    shlibpath_var=LD_LIBRARY_PATH
+  else
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line `#! .'.  This would cause the generated library to
+    # depend on `.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[01] | aix4.[01].*)
+	if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	     echo ' yes '
+	     echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
+	  :
+	else
+	  can_build_shared=no
+	fi
+	;;
+    esac
+    # AIX (on Power*) has no versioning support, so currently we can
+    # not hardcode correct soname into executable. Probably we can
+    # add versioning support to collect2, so additional links can
+    # be useful in future.
+    if test "$aix_use_runtimelinking" = yes; then
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+    else
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='${libname}${release}.a $libname.a'
+      soname_spec='${libname}${release}.so$major'
+    fi
+    shlibpath_var=LIBPATH
+  fi
+  hardcode_into_libs=yes
+  ;;
+
+amigaos*)
+  library_names_spec='$libname.ixlibrary $libname.a'
+  # Create ${libname}_ixlibrary.a entries in /sys/libs.
+  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
+  ;;
+
+beos*)
+  library_names_spec='${libname}.so'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  ;;
+
+bsdi4*)
+  version_type=linux
+  need_version=no
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  soname_spec='${libname}${release}.so$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  export_dynamic_flag_spec=-rdynamic
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw* | pw32*)
+  version_type=windows
+  need_version=no
+  need_lib_prefix=no
+  case $GCC,$host_os in
+  yes,cygwin*)
+    library_names_spec='$libname.dll.a'
+    soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll'
+    postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog .libs/$dlname \$dldir/$dlname'
+    postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $rm \$dlpath'
+    ;;
+  yes,mingw*)
+    library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll'
+    sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g" -e "s,=/,/,g"`
+    ;;
+  yes,pw32*)
+    library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/./-/g'`${versuffix}.dll'
+    ;;
+  *)
+    library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.lib'
+    ;;
+  esac
+  dynamic_linker='Win32 ld.exe'
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  ;;
+
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  # FIXME: Relying on posixy $() will cause problems for
+  #        cross-compilation, but unfortunately the echo tests do not
+  #        yet detect zsh echo's removal of \ escapes.
+  library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)'
+  soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  ;;
+
+freebsd1*)
+  dynamic_linker=no
+  ;;
+
+freebsd*-gnu*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  soname_spec='${libname}${release}.so$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='GNU/FreeBSD ld.so'
+  ;;
+
+freebsd*)
+  objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  *)
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
+
+gnu*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so'
+  soname_spec='${libname}${release}.so$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  hardcode_into_libs=yes
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  dynamic_linker="$host_os dld.sl"
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  shlibpath_var=SHLIB_PATH
+  shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+  library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl'
+  soname_spec='${libname}${release}.sl$major'
+  # HP-UX runs *really* slowly unless shared libraries are mode 555.
+  postinstall_cmds='chmod 555 $lib'
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)          version_type=irix ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}.so$major'
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*)
+  dynamic_linker=no
+  ;;
+
+# This must be Linux ELF.
+linux-gnu*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  soname_spec='${libname}${release}.so$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
+
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+    library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so'
+    soname_spec='${libname}${release}.so$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
+
+newsos6)
+  version_type=linux
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+openbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    case "$host_os" in
+    openbsd2.[89] | openbsd2.[89].*)
+      shlibpath_overrides_runpath=no
+      ;;
+    *)
+      shlibpath_overrides_runpath=yes
+      ;;
+    esac
+  else
+    shlibpath_overrides_runpath=yes
+  fi
+  library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+os2*)
+  libname_spec='$name'
+  need_lib_prefix=no
+  library_names_spec='$libname.dll $libname.a'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=LIBPATH
+  ;;
+
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_version=no
+  need_lib_prefix=no
+  soname_spec='${libname}${release}.so$major'
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  hardcode_into_libs=yes
+  ;;
+
+sco3.2v5*)
+  version_type=osf
+  soname_spec='${libname}${release}.so$major'
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+solaris*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  soname_spec='${libname}${release}.so$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+  version_type=linux
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  soname_spec='${libname}${release}.so$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      export_dynamic_flag_spec='${wl}-Blargedynsym'
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      ;;
+  esac
+  ;;
+
+uts4*)
+  version_type=linux
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  soname_spec='${libname}${release}.so$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+dgux*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  soname_spec='${libname}${release}.so$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec ;then
+    version_type=linux
+    library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so'
+    soname_spec='$libname.so.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+echo "$as_me:$LINENO: result: $dynamic_linker" >&5
+echo "${ECHO_T}$dynamic_linker" >&6
+test "$dynamic_linker" = no && can_build_shared=no
+
+# Report the final consequences.
+echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
+echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6
+echo "$as_me:$LINENO: result: $can_build_shared" >&5
+echo "${ECHO_T}$can_build_shared" >&6
+
+echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
+echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6
+test "$can_build_shared" = "no" && enable_shared=no
+
+# On AIX, shared libraries and static libraries use the same namespace, and
+# are all built from PIC.
+case "$host_os" in
+aix3*)
+  test "$enable_shared" = yes && enable_static=no
+  if test -n "$RANLIB"; then
+    archive_cmds="$archive_cmds~\$RANLIB \$lib"
+    postinstall_cmds='$RANLIB $lib'
+  fi
+  ;;
+
+aix4*)
+  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+    test "$enable_shared" = yes && enable_static=no
+  fi
+  ;;
+esac
+echo "$as_me:$LINENO: result: $enable_shared" >&5
+echo "${ECHO_T}$enable_shared" >&6
+
+echo "$as_me:$LINENO: checking whether to build static libraries" >&5
+echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6
+# Make sure either enable_shared or enable_static is yes.
+test "$enable_shared" = yes || enable_static=yes
+echo "$as_me:$LINENO: result: $enable_static" >&5
+echo "${ECHO_T}$enable_static" >&6
+
+if test "$hardcode_action" = relink; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+if test "x$enable_dlopen" != xyes; then
+  enable_dlopen=unknown
+  enable_dlopen_self=unknown
+  enable_dlopen_self_static=unknown
+else
+  lt_cv_dlopen=no
+  lt_cv_dlopen_libs=
+
+  case $host_os in
+  beos*)
+    lt_cv_dlopen="load_add_on"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+    ;;
+
+  cygwin* | mingw* | pw32*)
+    lt_cv_dlopen="LoadLibrary"
+    lt_cv_dlopen_libs=
+   ;;
+
+  *)
+    echo "$as_me:$LINENO: checking for shl_load" >&5
+echo $ECHO_N "checking for shl_load... $ECHO_C" >&6
+if test "${ac_cv_func_shl_load+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char shl_load (); below.
+    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+    <limits.h> exists even on freestanding compilers.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+/* Override any gcc2 internal prototype to avoid an error.  */
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+/* We use char because int might match the return type of a gcc2
+   builtin and then its argument prototype would still apply.  */
+char shl_load ();
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined (__stub_shl_load) || defined (__stub___shl_load)
+choke me
+#else
+char (*f) () = shl_load;
+#endif
+#ifdef __cplusplus
+}
+#endif
+
+int
+main ()
+{
+return f != shl_load;
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+         { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_func_shl_load=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_func_shl_load=no
+fi
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5
+echo "${ECHO_T}$ac_cv_func_shl_load" >&6
+if test $ac_cv_func_shl_load = yes; then
+  lt_cv_dlopen="shl_load"
+else
+  echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5
+echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6
+if test "${ac_cv_lib_dld_shl_load+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld  $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+/* Override any gcc2 internal prototype to avoid an error.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+   builtin and then its argument prototype would still apply.  */
+char shl_load ();
+int
+main ()
+{
+shl_load ();
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+         { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_lib_dld_shl_load=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_dld_shl_load=no
+fi
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5
+echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6
+if test $ac_cv_lib_dld_shl_load = yes; then
+  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"
+else
+  echo "$as_me:$LINENO: checking for dlopen" >&5
+echo $ECHO_N "checking for dlopen... $ECHO_C" >&6
+if test "${ac_cv_func_dlopen+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char dlopen (); below.
+    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+    <limits.h> exists even on freestanding compilers.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+/* Override any gcc2 internal prototype to avoid an error.  */
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+/* We use char because int might match the return type of a gcc2
+   builtin and then its argument prototype would still apply.  */
+char dlopen ();
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined (__stub_dlopen) || defined (__stub___dlopen)
+choke me
+#else
+char (*f) () = dlopen;
+#endif
+#ifdef __cplusplus
+}
+#endif
+
+int
+main ()
+{
+return f != dlopen;
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+         { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_func_dlopen=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_func_dlopen=no
+fi
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5
+echo "${ECHO_T}$ac_cv_func_dlopen" >&6
+if test $ac_cv_func_dlopen = yes; then
+  lt_cv_dlopen="dlopen"
+else
+  echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
+echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6
+if test "${ac_cv_lib_dl_dlopen+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl  $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+/* Override any gcc2 internal prototype to avoid an error.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+   builtin and then its argument prototype would still apply.  */
+char dlopen ();
+int
+main ()
+{
+dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+         { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_lib_dl_dlopen=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_dl_dlopen=no
+fi
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
+echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6
+if test $ac_cv_lib_dl_dlopen = yes; then
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+  echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5
+echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6
+if test "${ac_cv_lib_svld_dlopen+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lsvld  $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+/* Override any gcc2 internal prototype to avoid an error.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+   builtin and then its argument prototype would still apply.  */
+char dlopen ();
+int
+main ()
+{
+dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+         { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_lib_svld_dlopen=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_svld_dlopen=no
+fi
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5
+echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6
+if test $ac_cv_lib_svld_dlopen = yes; then
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
+else
+  echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5
+echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6
+if test "${ac_cv_lib_dld_dld_link+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld  $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+/* Override any gcc2 internal prototype to avoid an error.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+   builtin and then its argument prototype would still apply.  */
+char dld_link ();
+int
+main ()
+{
+dld_link ();
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+         { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_lib_dld_dld_link=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_dld_dld_link=no
+fi
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5
+echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6
+if test $ac_cv_lib_dld_dld_link = yes; then
+  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+    ;;
+  esac
+
+  if test "x$lt_cv_dlopen" != xno; then
+    enable_dlopen=yes
+  else
+    enable_dlopen=no
+  fi
+
+  case $lt_cv_dlopen in
+  dlopen)
+    save_CPPFLAGS="$CPPFLAGS"
+        test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+    save_LDFLAGS="$LDFLAGS"
+    eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+    save_LIBS="$LIBS"
+    LIBS="$lt_cv_dlopen_libs $LIBS"
+
+    echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5
+echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6
+if test "${lt_cv_dlopen_self+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  	  if test "$cross_compiling" = yes; then :
+  lt_cv_dlopen_self=cross
+else
+    lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<EOF
+#line 6984 "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+#ifdef __cplusplus
+extern "C" void exit (int);
+#endif
+
+void fnord() { int i=42;}
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+      /* dlclose (self); */
+    }
+
+    exit (status);
+}
+EOF
+  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
+    (./conftest; exit; ) 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
+      x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
+      x$lt_unknown|x*) lt_cv_dlopen_self=no ;;
+    esac
+  else :
+    # compilation failed
+    lt_cv_dlopen_self=no
+  fi
+fi
+rm -fr conftest*
+
+
+fi
+echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5
+echo "${ECHO_T}$lt_cv_dlopen_self" >&6
+
+    if test "x$lt_cv_dlopen_self" = xyes; then
+      LDFLAGS="$LDFLAGS $link_static_flag"
+      echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5
+echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6
+if test "${lt_cv_dlopen_self_static+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  	  if test "$cross_compiling" = yes; then :
+  lt_cv_dlopen_self_static=cross
+else
+    lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<EOF
+#line 7082 "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+#ifdef __cplusplus
+extern "C" void exit (int);
+#endif
+
+void fnord() { int i=42;}
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+      /* dlclose (self); */
+    }
+
+    exit (status);
+}
+EOF
+  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
+    (./conftest; exit; ) 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
+      x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
+      x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;;
+    esac
+  else :
+    # compilation failed
+    lt_cv_dlopen_self_static=no
+  fi
+fi
+rm -fr conftest*
+
+
+fi
+echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5
+echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6
+    fi
+
+    CPPFLAGS="$save_CPPFLAGS"
+    LDFLAGS="$save_LDFLAGS"
+    LIBS="$save_LIBS"
+    ;;
+  esac
+
+  case $lt_cv_dlopen_self in
+  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+  *) enable_dlopen_self=unknown ;;
+  esac
+
+  case $lt_cv_dlopen_self_static in
+  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+  *) enable_dlopen_self_static=unknown ;;
+  esac
+fi
+
+
+if test "$enable_shared" = yes && test "$GCC" = yes; then
+  case $archive_cmds in
+  *'~'*)
+    # FIXME: we may have to deal with multi-command sequences.
+    ;;
+  '$CC '*)
+    # Test whether the compiler implicitly links with -lc since on some
+    # systems, -lgcc has to come before -lc. If gcc already passes -lc
+    # to ld, don't add -lc before -lgcc.
+    echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
+echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6
+    if test "${lt_cv_archive_cmds_need_lc+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  $rm conftest*
+    echo 'static int dummy;' > conftest.$ac_ext
+
+    if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
+      soname=conftest
+      lib=conftest
+      libobjs=conftest.$ac_objext
+      deplibs=
+      wl=$lt_cv_prog_cc_wl
+      compiler_flags=-v
+      linker_flags=-v
+      verstring=
+      output_objdir=.
+      libname=conftest
+      save_allow_undefined_flag=$allow_undefined_flag
+      allow_undefined_flag=
+      if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
+  (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }
+      then
+	lt_cv_archive_cmds_need_lc=no
+      else
+	lt_cv_archive_cmds_need_lc=yes
+      fi
+      allow_undefined_flag=$save_allow_undefined_flag
+    else
+      cat conftest.err 1>&5
+    fi
+fi
+
+    echo "$as_me:$LINENO: result: $lt_cv_archive_cmds_need_lc" >&5
+echo "${ECHO_T}$lt_cv_archive_cmds_need_lc" >&6
+    ;;
+  esac
+fi
+need_lc=${lt_cv_archive_cmds_need_lc-yes}
+
+# The second clause should only fire when bootstrapping the
+# libtool distribution, otherwise you forgot to ship ltmain.sh
+# with your package, and you will get complaints that there are
+# no rules to generate ltmain.sh.
+if test -f "$ltmain"; then
+  :
+else
+  # If there is no Makefile yet, we rely on a make rule to execute
+  # `config.status --recheck' to rerun these tests and create the
+  # libtool script then.
+  test -f Makefile && make "$ltmain"
+fi
+
+if test -f "$ltmain"; then
+  trap "$rm \"${ofile}T\"; exit 1" 1 2 15
+  $rm -f "${ofile}T"
+
+  echo creating $ofile
+
+  # Now quote all the things that may contain metacharacters while being
+  # careful not to overquote the AC_SUBSTed values.  We take copies of the
+  # variables and quote the copies for generation of the libtool script.
+  for var in echo old_CC old_CFLAGS SED \
+    AR AR_FLAGS CC LD LN_S NM SHELL \
+    reload_flag reload_cmds wl \
+    pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \
+    thread_safe_flag_spec whole_archive_flag_spec libname_spec \
+    library_names_spec soname_spec \
+    RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \
+    old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds \
+    postuninstall_cmds extract_expsyms_cmds old_archive_from_expsyms_cmds \
+    old_striplib striplib file_magic_cmd export_symbols_cmds \
+    deplibs_check_method allow_undefined_flag no_undefined_flag \
+    finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \
+    global_symbol_to_c_name_address \
+    hardcode_libdir_flag_spec hardcode_libdir_separator  \
+    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
+    compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do
+
+    case $var in
+    reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \
+    old_postinstall_cmds | old_postuninstall_cmds | \
+    export_symbols_cmds | archive_cmds | archive_expsym_cmds | \
+    extract_expsyms_cmds | old_archive_from_expsyms_cmds | \
+    postinstall_cmds | postuninstall_cmds | \
+    finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
+      # Double-quote double-evaled strings.
+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
+      ;;
+    *)
+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
+      ;;
+    esac
+  done
+
+  cat <<__EOF__ > "${ofile}T"
+#! $SHELL
+
+# `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+# Copyright (C) 1996-2000 Free Software Foundation, Inc.
+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# A sed that does not truncate output.
+SED=$lt_SED
+
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="${SED} -e s/^X//"
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
+
+# ### BEGIN LIBTOOL CONFIG
+
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$need_lc
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# The host system.
+host_alias=$host_alias
+host=$host
+
+# An echo program that does not interpret backslashes.
+echo=$lt_echo
+
+# The archiver.
+AR=$lt_AR
+AR_FLAGS=$lt_AR_FLAGS
+
+# The default C compiler.
+CC=$lt_CC
+
+# Is the compiler the GNU C compiler?
+with_gcc=$GCC
+
+# The linker used to build libraries.
+LD=$lt_LD
+
+# Whether we need hard or soft links.
+LN_S=$lt_LN_S
+
+# A BSD-compatible nm program.
+NM=$lt_NM
+
+# A symbol stripping program
+STRIP=$STRIP
+
+# Used to examine libraries when file_magic_cmd begins "file"
+MAGIC_CMD=$MAGIC_CMD
+
+# Used on cygwin: DLL creation program.
+DLLTOOL="$DLLTOOL"
+
+# Used on cygwin: object dumper.
+OBJDUMP="$OBJDUMP"
+
+# Used on cygwin: assembler.
+AS="$AS"
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
+# How to pass a linker flag through the compiler.
+wl=$lt_wl
+
+# Object file suffix (normally "o").
+objext="$ac_objext"
+
+# Old archive suffix (normally "a").
+libext="$libext"
+
+# Executable file suffix (normally "").
+exeext="$exeext"
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_pic_flag
+pic_mode=$pic_mode
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_compiler_c_o
+
+# Can we write directly to a .lo ?
+compiler_o_lo=$lt_compiler_o_lo
+
+# Must we lock files when doing compilation ?
+need_locks=$lt_need_locks
+
+# Do we need the lib prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_link_static_flag
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_no_builtin_flag
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec
+
+# Compiler flag to generate thread-safe objects.
+thread_safe_flag_spec=$lt_thread_safe_flag_spec
+
+# Library versioning type.
+version_type=$version_type
+
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+
+# List of archive names.  First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME.
+library_names_spec=$lt_library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+
+# Commands used to build and install an old-style archive.
+RANLIB=$lt_RANLIB
+old_archive_cmds=$lt_old_archive_cmds
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
+
+# Commands used to build and install a shared archive.
+archive_cmds=$lt_archive_cmds
+archive_expsym_cmds=$lt_archive_expsym_cmds
+postinstall_cmds=$lt_postinstall_cmds
+postuninstall_cmds=$lt_postuninstall_cmds
+
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+
+# Command to use when deplibs_check_method == file_magic.
+file_magic_cmd=$lt_file_magic_cmd
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag
+
+# Flag that forces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+
+# Same as above, but a single script fragment to be evaled but not shown.
+finish_eval=$lt_finish_eval
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration
+global_symbol_to_cdecl=$lt_global_symbol_to_cdecl
+
+# Transform the output of nm in a C name address pair
+global_symbol_to_c_name_address=$lt_global_symbol_to_c_name_address
+
+# This is the shared library runtime path variable.
+runpath_var=$runpath_var
+
+# This is the shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
+
+# Whether we need a single -rpath flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator
+
+# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
+# resulting binary.
+hardcode_direct=$hardcode_direct
+
+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
+# resulting binary.
+hardcode_minus_L=$hardcode_minus_L
+
+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
+# the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at relink time.
+variables_saved_for_relink="$variables_saved_for_relink"
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs
+
+# Compile-time system search path for libraries
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+# Run-time system search path for libraries
+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+
+# Fix the shell variable \$srcfile for the compiler.
+fix_srcfile_path="$fix_srcfile_path"
+
+# Set to yes if exported symbols are required.
+always_export_symbols=$always_export_symbols
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms
+
+# ### END LIBTOOL CONFIG
+
+__EOF__
+
+  case $host_os in
+  aix3*)
+    cat <<\EOF >> "${ofile}T"
+
+# AIX sometimes has problems with the GCC collect2 program.  For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+  COLLECT_NAMES=
+  export COLLECT_NAMES
+fi
+EOF
+    ;;
+  esac
+
+  case $host_os in
+  cygwin* | mingw* | pw32* | os2*)
+    cat <<'EOF' >> "${ofile}T"
+      # This is a source program that is used to create dlls on Windows
+      # Don't remove nor modify the starting and closing comments
+# /* ltdll.c starts here */
+# #define WIN32_LEAN_AND_MEAN
+# #include <windows.h>
+# #undef WIN32_LEAN_AND_MEAN
+# #include <stdio.h>
+#
+# #ifndef __CYGWIN__
+# #  ifdef __CYGWIN32__
+# #    define __CYGWIN__ __CYGWIN32__
+# #  endif
+# #endif
+#
+# #ifdef __cplusplus
+# extern "C" {
+# #endif
+# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
+# #ifdef __cplusplus
+# }
+# #endif
+#
+# #ifdef __CYGWIN__
+# #include <cygwin/cygwin_dll.h>
+# DECLARE_CYGWIN_DLL( DllMain );
+# #endif
+# HINSTANCE __hDllInstance_base;
+#
+# BOOL APIENTRY
+# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
+# {
+#   __hDllInstance_base = hInst;
+#   return TRUE;
+# }
+# /* ltdll.c ends here */
+	# This is a source program that is used to create import libraries
+	# on Windows for dlls which lack them. Don't remove nor modify the
+	# starting and closing comments
+# /* impgen.c starts here */
+# /*   Copyright (C) 1999-2000 Free Software Foundation, Inc.
+#
+#  This file is part of GNU libtool.
+#
+#  This program is free software; you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation; either version 2 of the License, or
+#  (at your option) any later version.
+#
+#  This program is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with this program; if not, write to the Free Software
+#  Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#  */
+#
+# #include <stdio.h>		/* for printf() */
+# #include <unistd.h>		/* for open(), lseek(), read() */
+# #include <fcntl.h>		/* for O_RDONLY, O_BINARY */
+# #include <string.h>		/* for strdup() */
+#
+# /* O_BINARY isn't required (or even defined sometimes) under Unix */
+# #ifndef O_BINARY
+# #define O_BINARY 0
+# #endif
+#
+# static unsigned int
+# pe_get16 (fd, offset)
+#      int fd;
+#      int offset;
+# {
+#   unsigned char b[2];
+#   lseek (fd, offset, SEEK_SET);
+#   read (fd, b, 2);
+#   return b[0] + (b[1]<<8);
+# }
+#
+# static unsigned int
+# pe_get32 (fd, offset)
+#     int fd;
+#     int offset;
+# {
+#   unsigned char b[4];
+#   lseek (fd, offset, SEEK_SET);
+#   read (fd, b, 4);
+#   return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
+# }
+#
+# static unsigned int
+# pe_as32 (ptr)
+#      void *ptr;
+# {
+#   unsigned char *b = ptr;
+#   return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
+# }
+#
+# int
+# main (argc, argv)
+#     int argc;
+#     char *argv[];
+# {
+#     int dll;
+#     unsigned long pe_header_offset, opthdr_ofs, num_entries, i;
+#     unsigned long export_rva, export_size, nsections, secptr, expptr;
+#     unsigned long name_rvas, nexp;
+#     unsigned char *expdata, *erva;
+#     char *filename, *dll_name;
+#
+#     filename = argv[1];
+#
+#     dll = open(filename, O_RDONLY|O_BINARY);
+#     if (dll < 1)
+# 	return 1;
+#
+#     dll_name = filename;
+#
+#     for (i=0; filename[i]; i++)
+# 	if (filename[i] == '/' || filename[i] == '\\'  || filename[i] == ':')
+# 	    dll_name = filename + i +1;
+#
+#     pe_header_offset = pe_get32 (dll, 0x3c);
+#     opthdr_ofs = pe_header_offset + 4 + 20;
+#     num_entries = pe_get32 (dll, opthdr_ofs + 92);
+#
+#     if (num_entries < 1) /* no exports */
+# 	return 1;
+#
+#     export_rva = pe_get32 (dll, opthdr_ofs + 96);
+#     export_size = pe_get32 (dll, opthdr_ofs + 100);
+#     nsections = pe_get16 (dll, pe_header_offset + 4 +2);
+#     secptr = (pe_header_offset + 4 + 20 +
+# 	      pe_get16 (dll, pe_header_offset + 4 + 16));
+#
+#     expptr = 0;
+#     for (i = 0; i < nsections; i++)
+#     {
+# 	char sname[8];
+# 	unsigned long secptr1 = secptr + 40 * i;
+# 	unsigned long vaddr = pe_get32 (dll, secptr1 + 12);
+# 	unsigned long vsize = pe_get32 (dll, secptr1 + 16);
+# 	unsigned long fptr = pe_get32 (dll, secptr1 + 20);
+# 	lseek(dll, secptr1, SEEK_SET);
+# 	read(dll, sname, 8);
+# 	if (vaddr <= export_rva && vaddr+vsize > export_rva)
+# 	{
+# 	    expptr = fptr + (export_rva - vaddr);
+# 	    if (export_rva + export_size > vaddr + vsize)
+# 		export_size = vsize - (export_rva - vaddr);
+# 	    break;
+# 	}
+#     }
+#
+#     expdata = (unsigned char*)malloc(export_size);
+#     lseek (dll, expptr, SEEK_SET);
+#     read (dll, expdata, export_size);
+#     erva = expdata - export_rva;
+#
+#     nexp = pe_as32 (expdata+24);
+#     name_rvas = pe_as32 (expdata+32);
+#
+#     printf ("EXPORTS\n");
+#     for (i = 0; i<nexp; i++)
+#     {
+# 	unsigned long name_rva = pe_as32 (erva+name_rvas+i*4);
+# 	printf ("\t%s @ %ld ;\n", erva+name_rva, 1+ i);
+#     }
+#
+#     return 0;
+# }
+# /* impgen.c ends here */
+
+EOF
+    ;;
+  esac
+
+  # We use sed instead of cat because bash on DJGPP gets confused if
+  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
+  # text mode, it properly converts lines to CR/LF.  This bash problem
+  # is reportedly fixed, but why not run on old versions too?
+  sed '$q' "$ltmain" >> "${ofile}T" || (rm -f "${ofile}T"; exit 1)
+
+  mv -f "${ofile}T" "$ofile" || \
+    (rm -f "$ofile" && cp "${ofile}T" "$ofile" && rm -f "${ofile}T")
+  chmod +x "$ofile"
+fi
+
+
+
+
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+
+# Prevent multiple expansion
+
+
+
+# Checks for header files.
+echo "$as_me:$LINENO: checking for X" >&5
+echo $ECHO_N "checking for X... $ECHO_C" >&6
+
+
+# Check whether --with-x or --without-x was given.
+if test "${with_x+set}" = set; then
+  withval="$with_x"
+
+fi;
+# $have_x is `yes', `no', `disabled', or empty when we do not yet know.
+if test "x$with_x" = xno; then
+  # The user explicitly disabled X.
+  have_x=disabled
+else
+  if test "x$x_includes" != xNONE && test "x$x_libraries" != xNONE; then
+    # Both variables are already set.
+    have_x=yes
+  else
+    if test "${ac_cv_have_x+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  # One or both of the vars are not set, and there is no cached value.
+ac_x_includes=no ac_x_libraries=no
+rm -fr conftest.dir
+if mkdir conftest.dir; then
+  cd conftest.dir
+  # Make sure to not put "make" in the Imakefile rules, since we grep it out.
+  cat >Imakefile <<'_ACEOF'
+acfindx:
+	@echo 'ac_im_incroot="${INCROOT}"; ac_im_usrlibdir="${USRLIBDIR}"; ac_im_libdir="${LIBDIR}"'
+_ACEOF
+  if (xmkmf) >/dev/null 2>/dev/null && test -f Makefile; then
+    # GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+    eval `${MAKE-make} acfindx 2>/dev/null | grep -v make`
+    # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR.
+    for ac_extension in a so sl; do
+      if test ! -f $ac_im_usrlibdir/libX11.$ac_extension &&
+         test -f $ac_im_libdir/libX11.$ac_extension; then
+        ac_im_usrlibdir=$ac_im_libdir; break
+      fi
+    done
+    # Screen out bogus values from the imake configuration.  They are
+    # bogus both because they are the default anyway, and because
+    # using them would break gcc on systems where it needs fixed includes.
+    case $ac_im_incroot in
+	/usr/include) ;;
+	*) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes=$ac_im_incroot;;
+    esac
+    case $ac_im_usrlibdir in
+	/usr/lib | /lib) ;;
+	*) test -d "$ac_im_usrlibdir" && ac_x_libraries=$ac_im_usrlibdir ;;
+    esac
+  fi
+  cd ..
+  rm -fr conftest.dir
+fi
+
+# Standard set of common directories for X headers.
+# Check X11 before X11Rn because it is often a symlink to the current release.
+ac_x_header_dirs='
+/usr/X11/include
+/usr/X11R6/include
+/usr/X11R5/include
+/usr/X11R4/include
+
+/usr/include/X11
+/usr/include/X11R6
+/usr/include/X11R5
+/usr/include/X11R4
+
+/usr/local/X11/include
+/usr/local/X11R6/include
+/usr/local/X11R5/include
+/usr/local/X11R4/include
+
+/usr/local/include/X11
+/usr/local/include/X11R6
+/usr/local/include/X11R5
+/usr/local/include/X11R4
+
+/usr/X386/include
+/usr/x386/include
+/usr/XFree86/include/X11
+
+/usr/include
+/usr/local/include
+/usr/unsupported/include
+/usr/athena/include
+/usr/local/x11r5/include
+/usr/lpp/Xamples/include
+
+/usr/openwin/include
+/usr/openwin/share/include'
+
+if test "$ac_x_includes" = no; then
+  # Guess where to find include files, by looking for Intrinsic.h.
+  # First, try using that file with no special directory specified.
+  cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <X11/Intrinsic.h>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null; then
+  if test -s conftest.err; then
+    ac_cpp_err=$ac_c_preproc_warn_flag
+  else
+    ac_cpp_err=
+  fi
+else
+  ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+  # We can compile using X headers with no special include directory.
+ac_x_includes=
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+  for ac_dir in $ac_x_header_dirs; do
+  if test -r "$ac_dir/X11/Intrinsic.h"; then
+    ac_x_includes=$ac_dir
+    break
+  fi
+done
+fi
+rm -f conftest.err conftest.$ac_ext
+fi # $ac_x_includes = no
+
+if test "$ac_x_libraries" = no; then
+  # Check for the libraries.
+  # See if we find them without any special options.
+  # Don't add to $LIBS permanently.
+  ac_save_LIBS=$LIBS
+  LIBS="-lXt $LIBS"
+  cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <X11/Intrinsic.h>
+int
+main ()
+{
+XtMalloc (0)
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+         { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  LIBS=$ac_save_LIBS
+# We can link X programs with no special library path.
+ac_x_libraries=
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+LIBS=$ac_save_LIBS
+for ac_dir in `echo "$ac_x_includes $ac_x_header_dirs" | sed s/include/lib/g`
+do
+  # Don't even attempt the hair of trying to link an X program!
+  for ac_extension in a so sl; do
+    if test -r $ac_dir/libXt.$ac_extension; then
+      ac_x_libraries=$ac_dir
+      break 2
+    fi
+  done
+done
+fi
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+fi # $ac_x_libraries = no
+
+if test "$ac_x_includes" = no || test "$ac_x_libraries" = no; then
+  # Didn't find X anywhere.  Cache the known absence of X.
+  ac_cv_have_x="have_x=no"
+else
+  # Record where we found X for the cache.
+  ac_cv_have_x="have_x=yes \
+	        ac_x_includes=$ac_x_includes ac_x_libraries=$ac_x_libraries"
+fi
+fi
+
+  fi
+  eval "$ac_cv_have_x"
+fi # $with_x != no
+
+if test "$have_x" != yes; then
+  echo "$as_me:$LINENO: result: $have_x" >&5
+echo "${ECHO_T}$have_x" >&6
+  no_x=yes
+else
+  # If each of the values was on the command line, it overrides each guess.
+  test "x$x_includes" = xNONE && x_includes=$ac_x_includes
+  test "x$x_libraries" = xNONE && x_libraries=$ac_x_libraries
+  # Update the cache value to reflect the command line values.
+  ac_cv_have_x="have_x=yes \
+		ac_x_includes=$x_includes ac_x_libraries=$x_libraries"
+  echo "$as_me:$LINENO: result: libraries $x_libraries, headers $x_includes" >&5
+echo "${ECHO_T}libraries $x_libraries, headers $x_includes" >&6
+fi
+
+echo "$as_me:$LINENO: checking for ANSI C header files" >&5
+echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
+if test "${ac_cv_header_stdc+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+         { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_header_stdc=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_header_stdc=no
+fi
+rm -f conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+  cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "memchr" >/dev/null 2>&1; then
+  :
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+  cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "free" >/dev/null 2>&1; then
+  :
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+  if test "$cross_compiling" = yes; then
+  :
+else
+  cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <ctype.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+                   (('a' <= (c) && (c) <= 'i') \
+                     || ('j' <= (c) && (c) <= 'r') \
+                     || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+  int i;
+  for (i = 0; i < 256; i++)
+    if (XOR (islower (i), ISLOWER (i))
+        || toupper (i) != TOUPPER (i))
+      exit(2);
+  exit (0);
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  :
+else
+  echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+ac_cv_header_stdc=no
+fi
+rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+fi
+fi
+echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
+echo "${ECHO_T}$ac_cv_header_stdc" >&6
+if test $ac_cv_header_stdc = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define STDC_HEADERS 1
+_ACEOF
+
+fi
+
+
+
+
+
+
+
+for ac_header in fcntl.h malloc.h stdlib.h string.h strings.h unistd.h
+do
+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+  echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+else
+  # Is the header compilable?
+echo "$as_me:$LINENO: checking $ac_header usability" >&5
+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_includes_default
+#include <$ac_header>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+         { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_header_compiler=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_header_compiler=no
+fi
+rm -f conftest.$ac_objext conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6
+
+# Is the header present?
+echo "$as_me:$LINENO: checking $ac_header presence" >&5
+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <$ac_header>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null; then
+  if test -s conftest.err; then
+    ac_cpp_err=$ac_c_preproc_warn_flag
+  else
+    ac_cpp_err=
+  fi
+else
+  ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+  ac_header_preproc=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+  ac_header_preproc=no
+fi
+rm -f conftest.err conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6
+
+# So?  What about this header?
+case $ac_header_compiler:$ac_header_preproc in
+  yes:no )
+    { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
+    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+    (
+      cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to bug-autoconf@gnu.org. ##
+## ------------------------------------ ##
+_ASBOX
+    ) |
+      sed "s/^/$as_me: WARNING:     /" >&2
+    ;;
+  no:yes )
+    { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
+    { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
+echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
+    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+    (
+      cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to bug-autoconf@gnu.org. ##
+## ------------------------------------ ##
+_ASBOX
+    ) |
+      sed "s/^/$as_me: WARNING:     /" >&2
+    ;;
+esac
+echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  eval "$as_ac_Header=$ac_header_preproc"
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+
+fi
+if test `eval echo '${'$as_ac_Header'}'` = yes; then
+  cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+# Checks for typedefs, structures, and compiler characteristics.
+echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5
+echo $ECHO_N "checking for an ANSI C-conforming const... $ECHO_C" >&6
+if test "${ac_cv_c_const+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+/* FIXME: Include the comments suggested by Paul. */
+#ifndef __cplusplus
+  /* Ultrix mips cc rejects this.  */
+  typedef int charset[2];
+  const charset x;
+  /* SunOS 4.1.1 cc rejects this.  */
+  char const *const *ccp;
+  char **p;
+  /* NEC SVR4.0.2 mips cc rejects this.  */
+  struct point {int x, y;};
+  static struct point const zero = {0,0};
+  /* AIX XL C 1.02.0.0 rejects this.
+     It does not let you subtract one const X* pointer from another in
+     an arm of an if-expression whose if-part is not a constant
+     expression */
+  const char *g = "string";
+  ccp = &g + (g ? g-g : 0);
+  /* HPUX 7.0 cc rejects these. */
+  ++ccp;
+  p = (char**) ccp;
+  ccp = (char const *const *) p;
+  { /* SCO 3.2v4 cc rejects this.  */
+    char *t;
+    char const *s = 0 ? (char *) 0 : (char const *) 0;
+
+    *t++ = 0;
+  }
+  { /* Someone thinks the Sun supposedly-ANSI compiler will reject this.  */
+    int x[] = {25, 17};
+    const int *foo = &x[0];
+    ++foo;
+  }
+  { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
+    typedef const int *iptr;
+    iptr p = 0;
+    ++p;
+  }
+  { /* AIX XL C 1.02.0.0 rejects this saying
+       "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
+    struct s { int j; const int *ap[3]; };
+    struct s *b; b->j = 5;
+  }
+  { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
+    const int foo = 10;
+  }
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+         { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_c_const=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_c_const=no
+fi
+rm -f conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_c_const" >&5
+echo "${ECHO_T}$ac_cv_c_const" >&6
+if test $ac_cv_c_const = no; then
+
+cat >>confdefs.h <<\_ACEOF
+#define const
+_ACEOF
+
+fi
+
+echo "$as_me:$LINENO: checking for size_t" >&5
+echo $ECHO_N "checking for size_t... $ECHO_C" >&6
+if test "${ac_cv_type_size_t+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_includes_default
+int
+main ()
+{
+if ((size_t *) 0)
+  return 0;
+if (sizeof (size_t))
+  return 0;
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+         { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_type_size_t=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_type_size_t=no
+fi
+rm -f conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_type_size_t" >&5
+echo "${ECHO_T}$ac_cv_type_size_t" >&6
+if test $ac_cv_type_size_t = yes; then
+  :
+else
+
+cat >>confdefs.h <<_ACEOF
+#define size_t unsigned
+_ACEOF
+
+fi
+
+echo "$as_me:$LINENO: checking whether struct tm is in sys/time.h or time.h" >&5
+echo $ECHO_N "checking whether struct tm is in sys/time.h or time.h... $ECHO_C" >&6
+if test "${ac_cv_struct_tm+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <sys/types.h>
+#include <time.h>
+
+int
+main ()
+{
+struct tm *tp; tp->tm_sec;
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+         { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_struct_tm=time.h
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_struct_tm=sys/time.h
+fi
+rm -f conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_struct_tm" >&5
+echo "${ECHO_T}$ac_cv_struct_tm" >&6
+if test $ac_cv_struct_tm = sys/time.h; then
+
+cat >>confdefs.h <<\_ACEOF
+#define TM_IN_SYS_TIME 1
+_ACEOF
+
+fi
+
+
+# Checks for library functions.
+
+for ac_header in stdlib.h
+do
+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+  echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+else
+  # Is the header compilable?
+echo "$as_me:$LINENO: checking $ac_header usability" >&5
+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_includes_default
+#include <$ac_header>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+         { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_header_compiler=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_header_compiler=no
+fi
+rm -f conftest.$ac_objext conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6
+
+# Is the header present?
+echo "$as_me:$LINENO: checking $ac_header presence" >&5
+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <$ac_header>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null; then
+  if test -s conftest.err; then
+    ac_cpp_err=$ac_c_preproc_warn_flag
+  else
+    ac_cpp_err=
+  fi
+else
+  ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+  ac_header_preproc=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+  ac_header_preproc=no
+fi
+rm -f conftest.err conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6
+
+# So?  What about this header?
+case $ac_header_compiler:$ac_header_preproc in
+  yes:no )
+    { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
+    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+    (
+      cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to bug-autoconf@gnu.org. ##
+## ------------------------------------ ##
+_ASBOX
+    ) |
+      sed "s/^/$as_me: WARNING:     /" >&2
+    ;;
+  no:yes )
+    { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
+    { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
+echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
+    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+    (
+      cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to bug-autoconf@gnu.org. ##
+## ------------------------------------ ##
+_ASBOX
+    ) |
+      sed "s/^/$as_me: WARNING:     /" >&2
+    ;;
+esac
+echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  eval "$as_ac_Header=$ac_header_preproc"
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+
+fi
+if test `eval echo '${'$as_ac_Header'}'` = yes; then
+  cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+echo "$as_me:$LINENO: checking for GNU libc compatible malloc" >&5
+echo $ECHO_N "checking for GNU libc compatible malloc... $ECHO_C" >&6
+if test "${ac_cv_func_malloc_0_nonnull+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test "$cross_compiling" = yes; then
+  ac_cv_func_malloc_0_nonnull=no
+else
+  cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#if STDC_HEADERS || HAVE_STDLIB_H
+# include <stdlib.h>
+#else
+char *malloc ();
+#endif
+
+int
+main ()
+{
+exit (malloc (0) ? 0 : 1);
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_func_malloc_0_nonnull=yes
+else
+  echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+ac_cv_func_malloc_0_nonnull=no
+fi
+rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+fi
+echo "$as_me:$LINENO: result: $ac_cv_func_malloc_0_nonnull" >&5
+echo "${ECHO_T}$ac_cv_func_malloc_0_nonnull" >&6
+if test $ac_cv_func_malloc_0_nonnull = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_MALLOC 1
+_ACEOF
+
+else
+  cat >>confdefs.h <<\_ACEOF
+#define HAVE_MALLOC 0
+_ACEOF
+
+   LIBOBJS="$LIBOBJS malloc.$ac_objext"
+
+cat >>confdefs.h <<\_ACEOF
+#define malloc rpl_malloc
+_ACEOF
+
+fi
+
+
+
+echo "$as_me:$LINENO: checking for working strtod" >&5
+echo $ECHO_N "checking for working strtod... $ECHO_C" >&6
+if test "${ac_cv_func_strtod+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test "$cross_compiling" = yes; then
+  ac_cv_func_strtod=no
+else
+  cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+double strtod ();
+int
+main()
+{
+  {
+    /* Some versions of Linux strtod mis-parse strings with leading '+'.  */
+    char *string = " +69";
+    char *term;
+    double value;
+    value = strtod (string, &term);
+    if (value != 69 || term != (string + 4))
+      exit (1);
+  }
+
+  {
+    /* Under Solaris 2.4, strtod returns the wrong value for the
+       terminating character under some conditions.  */
+    char *string = "NaN";
+    char *term;
+    strtod (string, &term);
+    if (term != string && *(term - 1) == 0)
+      exit (1);
+  }
+  exit (0);
+}
+
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_func_strtod=yes
+else
+  echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+ac_cv_func_strtod=no
+fi
+rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+fi
+echo "$as_me:$LINENO: result: $ac_cv_func_strtod" >&5
+echo "${ECHO_T}$ac_cv_func_strtod" >&6
+if test $ac_cv_func_strtod = no; then
+  LIBOBJS="$LIBOBJS strtod.$ac_objext"
+echo "$as_me:$LINENO: checking for pow" >&5
+echo $ECHO_N "checking for pow... $ECHO_C" >&6
+if test "${ac_cv_func_pow+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char pow (); below.
+    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+    <limits.h> exists even on freestanding compilers.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+/* Override any gcc2 internal prototype to avoid an error.  */
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+/* We use char because int might match the return type of a gcc2
+   builtin and then its argument prototype would still apply.  */
+char pow ();
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined (__stub_pow) || defined (__stub___pow)
+choke me
+#else
+char (*f) () = pow;
+#endif
+#ifdef __cplusplus
+}
+#endif
+
+int
+main ()
+{
+return f != pow;
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+         { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_func_pow=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_func_pow=no
+fi
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_func_pow" >&5
+echo "${ECHO_T}$ac_cv_func_pow" >&6
+
+if test $ac_cv_func_pow = no; then
+  echo "$as_me:$LINENO: checking for pow in -lm" >&5
+echo $ECHO_N "checking for pow in -lm... $ECHO_C" >&6
+if test "${ac_cv_lib_m_pow+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lm  $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+/* Override any gcc2 internal prototype to avoid an error.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+   builtin and then its argument prototype would still apply.  */
+char pow ();
+int
+main ()
+{
+pow ();
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+         { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_lib_m_pow=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_m_pow=no
+fi
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_m_pow" >&5
+echo "${ECHO_T}$ac_cv_lib_m_pow" >&6
+if test $ac_cv_lib_m_pow = yes; then
+  POW_LIB=-lm
+else
+  { echo "$as_me:$LINENO: WARNING: cannot find library containing definition of pow" >&5
+echo "$as_me: WARNING: cannot find library containing definition of pow" >&2;}
+fi
+
+fi
+
+fi
+
+
+
+
+
+for ac_func in memset pow strrchr
+do
+as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
+echo "$as_me:$LINENO: checking for $ac_func" >&5
+echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
+if eval "test \"\${$as_ac_var+set}\" = set"; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char $ac_func (); below.
+    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+    <limits.h> exists even on freestanding compilers.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+/* Override any gcc2 internal prototype to avoid an error.  */
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+/* We use char because int might match the return type of a gcc2
+   builtin and then its argument prototype would still apply.  */
+char $ac_func ();
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+char (*f) () = $ac_func;
+#endif
+#ifdef __cplusplus
+}
+#endif
+
+int
+main ()
+{
+return f != $ac_func;
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+         { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  eval "$as_ac_var=yes"
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+eval "$as_ac_var=no"
+fi
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
+if test `eval echo '${'$as_ac_var'}'` = yes; then
+  cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+done
+
+echo "$as_me:$LINENO: checking for sqrt" >&5
+echo $ECHO_N "checking for sqrt... $ECHO_C" >&6
+if test "${ac_cv_func_sqrt+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char sqrt (); below.
+    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+    <limits.h> exists even on freestanding compilers.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+/* Override any gcc2 internal prototype to avoid an error.  */
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+/* We use char because int might match the return type of a gcc2
+   builtin and then its argument prototype would still apply.  */
+char sqrt ();
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined (__stub_sqrt) || defined (__stub___sqrt)
+choke me
+#else
+char (*f) () = sqrt;
+#endif
+#ifdef __cplusplus
+}
+#endif
+
+int
+main ()
+{
+return f != sqrt;
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+         { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_func_sqrt=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_func_sqrt=no
+fi
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_func_sqrt" >&5
+echo "${ECHO_T}$ac_cv_func_sqrt" >&6
+if test $ac_cv_func_sqrt = yes; then
+  :
+else
+
+echo "$as_me:$LINENO: checking for sqrt in -lm" >&5
+echo $ECHO_N "checking for sqrt in -lm... $ECHO_C" >&6
+if test "${ac_cv_lib_m_sqrt+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lm  $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+/* Override any gcc2 internal prototype to avoid an error.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+   builtin and then its argument prototype would still apply.  */
+char sqrt ();
+int
+main ()
+{
+sqrt ();
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+         { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_lib_m_sqrt=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_m_sqrt=no
+fi
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_m_sqrt" >&5
+echo "${ECHO_T}$ac_cv_lib_m_sqrt" >&6
+if test $ac_cv_lib_m_sqrt = yes; then
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_LIBM 1
+_ACEOF
+
+  LIBS="-lm $LIBS"
+
+else
+  cannot find sqrt
+fi
+
+fi
+
+
+echo "$as_me:$LINENO: checking for zlibVersion in -lz" >&5
+echo $ECHO_N "checking for zlibVersion in -lz... $ECHO_C" >&6
+if test "${ac_cv_lib_z_zlibVersion+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lz  $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+#line $LINENO "configure"
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+/* Override any gcc2 internal prototype to avoid an error.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+   builtin and then its argument prototype would still apply.  */
+char zlibVersion ();
+int
+main ()
+{
+zlibVersion ();
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+         { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_lib_z_zlibVersion=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_z_zlibVersion=no
+fi
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_z_zlibVersion" >&5
+echo "${ECHO_T}$ac_cv_lib_z_zlibVersion" >&6
+if test $ac_cv_lib_z_zlibVersion = yes; then
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_LIBZ 1
+_ACEOF
+
+  LIBS="-lz $LIBS"
+
+else
+  { { echo "$as_me:$LINENO: error: ZLib not installed" >&5
+echo "$as_me: error: ZLib not installed" >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+
+
+# Check whether --with-pkgconfigdir or --without-pkgconfigdir was given.
+if test "${with_pkgconfigdir+set}" = set; then
+  withval="$with_pkgconfigdir"
+  PKGCONFIGDIR=${withval}
+else
+  PKGCONFIGDIR='${prefix}/lib/pkgconfig'
+fi;
+
+echo "$as_me:$LINENO: checking pkgconfig directory" >&5
+echo $ECHO_N "checking pkgconfig directory... $ECHO_C" >&6
+echo "$as_me:$LINENO: result: $PKGCONFIGDIR" >&5
+echo "${ECHO_T}$PKGCONFIGDIR" >&6
+
+
+LIBPNG12_VERSION_INFO=0:0:0
+
+LIBPNG3_VERSION_INFO=3:0:0
+
+
+          ac_config_files="$ac_config_files Makefile"
+
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems.  If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+{
+  (set) 2>&1 |
+    case `(ac_space=' '; set | grep ac_space) 2>&1` in
+    *ac_space=\ *)
+      # `set' does not quote correctly, so add quotes (double-quote
+      # substitution turns \\\\ into \\, and sed turns \\ into \).
+      sed -n \
+        "s/'/'\\\\''/g;
+    	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+      ;;
+    *)
+      # `set' quotes correctly as required by POSIX, so do not add quotes.
+      sed -n \
+        "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+      ;;
+    esac;
+} |
+  sed '
+     t clear
+     : clear
+     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+     t end
+     /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+     : end' >>confcache
+if diff $cache_file confcache >/dev/null 2>&1; then :; else
+  if test -w $cache_file; then
+    test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
+    cat confcache >$cache_file
+  else
+    echo "not updating unwritable cache $cache_file"
+  fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# VPATH may cause trouble with some makes, so we remove $(srcdir),
+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[ 	]*VPATH[ 	]*=/{
+s/:*\$(srcdir):*/:/;
+s/:*\${srcdir}:*/:/;
+s/:*@srcdir@:*/:/;
+s/^\([^=]*=[ 	]*\):*/\1/;
+s/:*$//;
+s/^[^=]*=[ 	]*$//;
+}'
+fi
+
+DEFS=-DHAVE_CONFIG_H
+
+ac_libobjs=
+ac_ltlibobjs=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+  # 1. Remove the extension, and $U if already installed.
+  ac_i=`echo "$ac_i" |
+         sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
+  # 2. Add them.
+  ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
+  ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
+  { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+   { (exit 1); exit 1; }; }
+fi
+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+  { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+: ${CONFIG_STATUS=./config.status}
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
+echo "$as_me: creating $CONFIG_STATUS" >&6;}
+cat >$CONFIG_STATUS <<_ACEOF
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+SHELL=\${CONFIG_SHELL-$SHELL}
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+## --------------------- ##
+## M4sh Initialization.  ##
+## --------------------- ##
+
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
+  set -o posix
+fi
+
+# Support unset when possible.
+if (FOO=FOO; unset FOO) >/dev/null 2>&1; then
+  as_unset=unset
+else
+  as_unset=false
+fi
+
+
+# Work around bugs in pre-3.0 UWIN ksh.
+$as_unset ENV MAIL MAILPATH
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+for as_var in \
+  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
+  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
+  LC_TELEPHONE LC_TIME
+do
+  if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then
+    eval $as_var=C; export $as_var
+  else
+    $as_unset $as_var
+  fi
+done
+
+# Required to use basename.
+if expr a : '\(a\)' >/dev/null 2>&1; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+
+# Name of the executable.
+as_me=`$as_basename "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)$' \| \
+	 .     : '\(.\)' 2>/dev/null ||
+echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
+  	  /^X\/\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\/\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+
+
+# PATH needs CR, and LINENO needs CR and PATH.
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  echo "#! /bin/sh" >conf$$.sh
+  echo  "exit 0"   >>conf$$.sh
+  chmod +x conf$$.sh
+  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+    PATH_SEPARATOR=';'
+  else
+    PATH_SEPARATOR=:
+  fi
+  rm -f conf$$.sh
+fi
+
+
+  as_lineno_1=$LINENO
+  as_lineno_2=$LINENO
+  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+  test "x$as_lineno_1" != "x$as_lineno_2" &&
+  test "x$as_lineno_3"  = "x$as_lineno_2"  || {
+  # Find who we are.  Look in the path if we contain no path at all
+  # relative or not.
+  case $0 in
+    *[\\/]* ) as_myself=$0 ;;
+    *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+
+       ;;
+  esac
+  # We did not find ourselves, most probably we were run as `sh COMMAND'
+  # in which case we are not to be found in the path.
+  if test "x$as_myself" = x; then
+    as_myself=$0
+  fi
+  if test ! -f "$as_myself"; then
+    { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
+echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
+   { (exit 1); exit 1; }; }
+  fi
+  case $CONFIG_SHELL in
+  '')
+    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for as_base in sh bash ksh sh5; do
+	 case $as_dir in
+	 /*)
+	   if ("$as_dir/$as_base" -c '
+  as_lineno_1=$LINENO
+  as_lineno_2=$LINENO
+  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+  test "x$as_lineno_1" != "x$as_lineno_2" &&
+  test "x$as_lineno_3"  = "x$as_lineno_2" ') 2>/dev/null; then
+	     $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
+	     $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
+	     CONFIG_SHELL=$as_dir/$as_base
+	     export CONFIG_SHELL
+	     exec "$CONFIG_SHELL" "$0" ${1+"$@"}
+	   fi;;
+	 esac
+       done
+done
+;;
+  esac
+
+  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
+  # uniformly replaced by the line number.  The first 'sed' inserts a
+  # line-number line before each line; the second 'sed' does the real
+  # work.  The second script uses 'N' to pair each line-number line
+  # with the numbered line, and appends trailing '-' during
+  # substitution so that $LINENO is not a special case at line end.
+  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
+  # second 'sed' script.  Blame Lee E. McMahon for sed's syntax.  :-)
+  sed '=' <$as_myself |
+    sed '
+      N
+      s,$,-,
+      : loop
+      s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
+      t loop
+      s,-$,,
+      s,^['$as_cr_digits']*\n,,
+    ' >$as_me.lineno &&
+  chmod +x $as_me.lineno ||
+    { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
+echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
+   { (exit 1); exit 1; }; }
+
+  # Don't try to exec as it changes $[0], causing all sort of problems
+  # (the dirname of $[0] is not the place where we might find the
+  # original and so on.  Autoconf is especially sensible to this).
+  . ./$as_me.lineno
+  # Exit status is that of the last command.
+  exit
+}
+
+
+case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
+  *c*,-n*) ECHO_N= ECHO_C='
+' ECHO_T='	' ;;
+  *c*,*  ) ECHO_N=-n ECHO_C= ECHO_T= ;;
+  *)       ECHO_N= ECHO_C='\c' ECHO_T= ;;
+esac
+
+if expr a : '\(a\)' >/dev/null 2>&1; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+rm -f conf$$ conf$$.exe conf$$.file
+echo >conf$$.file
+if ln -s conf$$.file conf$$ 2>/dev/null; then
+  # We could just check for DJGPP; but this test a) works b) is more generic
+  # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
+  if test -f conf$$.exe; then
+    # Don't use ln at all; we don't have any links
+    as_ln_s='cp -p'
+  else
+    as_ln_s='ln -s'
+  fi
+elif ln conf$$.file conf$$ 2>/dev/null; then
+  as_ln_s=ln
+else
+  as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.file
+
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p=:
+else
+  as_mkdir_p=false
+fi
+
+as_executable_p="test -f"
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g"
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.
+as_nl='
+'
+IFS=" 	$as_nl"
+
+# CDPATH.
+$as_unset CDPATH
+
+exec 6>&1
+
+# Open the log real soon, to keep \$[0] and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling.  Logging --version etc. is OK.
+exec 5>>config.log
+{
+  echo
+  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+} >&5
+cat >&5 <<_CSEOF
+
+This file was extended by libpng $as_me 1.2.8-automake, which was
+generated by GNU Autoconf 2.57.  Invocation command line was
+
+  CONFIG_FILES    = $CONFIG_FILES
+  CONFIG_HEADERS  = $CONFIG_HEADERS
+  CONFIG_LINKS    = $CONFIG_LINKS
+  CONFIG_COMMANDS = $CONFIG_COMMANDS
+  $ $0 $@
+
+_CSEOF
+echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
+echo >&5
+_ACEOF
+
+# Files that config.status was made for.
+if test -n "$ac_config_files"; then
+  echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
+fi
+
+if test -n "$ac_config_headers"; then
+  echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
+fi
+
+if test -n "$ac_config_links"; then
+  echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
+fi
+
+if test -n "$ac_config_commands"; then
+  echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+
+ac_cs_usage="\
+\`$as_me' instantiates files from templates according to the
+current configuration.
+
+Usage: $0 [OPTIONS] [FILE]...
+
+  -h, --help       print this help, then exit
+  -V, --version    print version number, then exit
+  -q, --quiet      do not print progress messages
+  -d, --debug      don't remove temporary files
+      --recheck    update $as_me by reconfiguring in the same conditions
+  --file=FILE[:TEMPLATE]
+                   instantiate the configuration file FILE
+  --header=FILE[:TEMPLATE]
+                   instantiate the configuration header FILE
+
+Configuration files:
+$config_files
+
+Configuration headers:
+$config_headers
+
+Configuration commands:
+$config_commands
+
+Report bugs to <bug-autoconf@gnu.org>."
+_ACEOF
+
+cat >>$CONFIG_STATUS <<_ACEOF
+ac_cs_version="\\
+libpng config.status 1.2.8-automake
+configured by $0, generated by GNU Autoconf 2.57,
+  with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
+
+Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001
+Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+srcdir=$srcdir
+INSTALL="$INSTALL"
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+# If no file are specified by the user, then we need to provide default
+# value.  By we need to know if files were specified by the user.
+ac_need_defaults=:
+while test $# != 0
+do
+  case $1 in
+  --*=*)
+    ac_option=`expr "x$1" : 'x\([^=]*\)='`
+    ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
+    ac_shift=:
+    ;;
+  -*)
+    ac_option=$1
+    ac_optarg=$2
+    ac_shift=shift
+    ;;
+  *) # This is not an option, so the user has probably given explicit
+     # arguments.
+     ac_option=$1
+     ac_need_defaults=false;;
+  esac
+
+  case $ac_option in
+  # Handling of the options.
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+    ac_cs_recheck=: ;;
+  --version | --vers* | -V )
+    echo "$ac_cs_version"; exit 0 ;;
+  --he | --h)
+    # Conflict between --help and --header
+    { { echo "$as_me:$LINENO: error: ambiguous option: $1
+Try \`$0 --help' for more information." >&5
+echo "$as_me: error: ambiguous option: $1
+Try \`$0 --help' for more information." >&2;}
+   { (exit 1); exit 1; }; };;
+  --help | --hel | -h )
+    echo "$ac_cs_usage"; exit 0 ;;
+  --debug | --d* | -d )
+    debug=: ;;
+  --file | --fil | --fi | --f )
+    $ac_shift
+    CONFIG_FILES="$CONFIG_FILES $ac_optarg"
+    ac_need_defaults=false;;
+  --header | --heade | --head | --hea )
+    $ac_shift
+    CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
+    ac_need_defaults=false;;
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil | --si | --s)
+    ac_cs_silent=: ;;
+
+  # This is an error.
+  -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
+Try \`$0 --help' for more information." >&5
+echo "$as_me: error: unrecognized option: $1
+Try \`$0 --help' for more information." >&2;}
+   { (exit 1); exit 1; }; } ;;
+
+  *) ac_config_targets="$ac_config_targets $1" ;;
+
+  esac
+  shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+  exec 6>/dev/null
+  ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+if \$ac_cs_recheck; then
+  echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
+  exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+fi
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<_ACEOF
+#
+# INIT-COMMANDS section.
+#
+
+AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+
+_ACEOF
+
+
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+for ac_config_target in $ac_config_targets
+do
+  case "$ac_config_target" in
+  # Handling of arguments.
+  "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+  "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+  "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
+  *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
+echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
+   { (exit 1); exit 1; }; };;
+  esac
+done
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used.  Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+  test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
+  test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
+fi
+
+# Have a temporary directory for convenience.  Make it in the build tree
+# simply because there is no reason to put it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Create a temporary directory, and hook for its removal unless debugging.
+$debug ||
+{
+  trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
+  trap '{ (exit 1); exit 1; }' 1 2 13 15
+}
+
+# Create a (secure) tmp directory for tmp files.
+
+{
+  tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
+  test -n "$tmp" && test -d "$tmp"
+}  ||
+{
+  tmp=./confstat$$-$RANDOM
+  (umask 077 && mkdir $tmp)
+} ||
+{
+   echo "$me: cannot create a temporary directory in ." >&2
+   { (exit 1); exit 1; }
+}
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<_ACEOF
+
+#
+# CONFIG_FILES section.
+#
+
+# No need to generate the scripts if there are no CONFIG_FILES.
+# This happens for instance when ./config.status config.h
+if test -n "\$CONFIG_FILES"; then
+  # Protect against being on the right side of a sed subst in config.status.
+  sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
+   s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
+s,@SHELL@,$SHELL,;t t
+s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
+s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t
+s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
+s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
+s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t
+s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
+s,@exec_prefix@,$exec_prefix,;t t
+s,@prefix@,$prefix,;t t
+s,@program_transform_name@,$program_transform_name,;t t
+s,@bindir@,$bindir,;t t
+s,@sbindir@,$sbindir,;t t
+s,@libexecdir@,$libexecdir,;t t
+s,@datadir@,$datadir,;t t
+s,@sysconfdir@,$sysconfdir,;t t
+s,@sharedstatedir@,$sharedstatedir,;t t
+s,@localstatedir@,$localstatedir,;t t
+s,@libdir@,$libdir,;t t
+s,@includedir@,$includedir,;t t
+s,@oldincludedir@,$oldincludedir,;t t
+s,@infodir@,$infodir,;t t
+s,@mandir@,$mandir,;t t
+s,@build_alias@,$build_alias,;t t
+s,@host_alias@,$host_alias,;t t
+s,@target_alias@,$target_alias,;t t
+s,@DEFS@,$DEFS,;t t
+s,@ECHO_C@,$ECHO_C,;t t
+s,@ECHO_N@,$ECHO_N,;t t
+s,@ECHO_T@,$ECHO_T,;t t
+s,@LIBS@,$LIBS,;t t
+s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
+s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
+s,@INSTALL_DATA@,$INSTALL_DATA,;t t
+s,@CYGPATH_W@,$CYGPATH_W,;t t
+s,@PACKAGE@,$PACKAGE,;t t
+s,@VERSION@,$VERSION,;t t
+s,@ACLOCAL@,$ACLOCAL,;t t
+s,@AUTOCONF@,$AUTOCONF,;t t
+s,@AUTOMAKE@,$AUTOMAKE,;t t
+s,@AUTOHEADER@,$AUTOHEADER,;t t
+s,@MAKEINFO@,$MAKEINFO,;t t
+s,@AMTAR@,$AMTAR,;t t
+s,@install_sh@,$install_sh,;t t
+s,@STRIP@,$STRIP,;t t
+s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t
+s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t
+s,@AWK@,$AWK,;t t
+s,@SET_MAKE@,$SET_MAKE,;t t
+s,@CC@,$CC,;t t
+s,@CFLAGS@,$CFLAGS,;t t
+s,@LDFLAGS@,$LDFLAGS,;t t
+s,@CPPFLAGS@,$CPPFLAGS,;t t
+s,@ac_ct_CC@,$ac_ct_CC,;t t
+s,@EXEEXT@,$EXEEXT,;t t
+s,@OBJEXT@,$OBJEXT,;t t
+s,@DEPDIR@,$DEPDIR,;t t
+s,@am__include@,$am__include,;t t
+s,@am__quote@,$am__quote,;t t
+s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t
+s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t
+s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t
+s,@CCDEPMODE@,$CCDEPMODE,;t t
+s,@am__fastdepCC_TRUE@,$am__fastdepCC_TRUE,;t t
+s,@am__fastdepCC_FALSE@,$am__fastdepCC_FALSE,;t t
+s,@build@,$build,;t t
+s,@build_cpu@,$build_cpu,;t t
+s,@build_vendor@,$build_vendor,;t t
+s,@build_os@,$build_os,;t t
+s,@host@,$host,;t t
+s,@host_cpu@,$host_cpu,;t t
+s,@host_vendor@,$host_vendor,;t t
+s,@host_os@,$host_os,;t t
+s,@LN_S@,$LN_S,;t t
+s,@ECHO@,$ECHO,;t t
+s,@RANLIB@,$RANLIB,;t t
+s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t
+s,@CPP@,$CPP,;t t
+s,@EGREP@,$EGREP,;t t
+s,@LIBTOOL@,$LIBTOOL,;t t
+s,@LIBOBJS@,$LIBOBJS,;t t
+s,@POW_LIB@,$POW_LIB,;t t
+s,@PKGCONFIGDIR@,$PKGCONFIGDIR,;t t
+s,@LIBPNG12_VERSION_INFO@,$LIBPNG12_VERSION_INFO,;t t
+s,@LIBPNG3_VERSION_INFO@,$LIBPNG3_VERSION_INFO,;t t
+s,@LTLIBOBJS@,$LTLIBOBJS,;t t
+CEOF
+
+_ACEOF
+
+  cat >>$CONFIG_STATUS <<\_ACEOF
+  # Split the substitutions into bite-sized pieces for seds with
+  # small command number limits, like on Digital OSF/1 and HP-UX.
+  ac_max_sed_lines=48
+  ac_sed_frag=1 # Number of current file.
+  ac_beg=1 # First line for current file.
+  ac_end=$ac_max_sed_lines # Line after last line for current file.
+  ac_more_lines=:
+  ac_sed_cmds=
+  while $ac_more_lines; do
+    if test $ac_beg -gt 1; then
+      sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
+    else
+      sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
+    fi
+    if test ! -s $tmp/subs.frag; then
+      ac_more_lines=false
+    else
+      # The purpose of the label and of the branching condition is to
+      # speed up the sed processing (if there are no `@' at all, there
+      # is no need to browse any of the substitutions).
+      # These are the two extra sed commands mentioned above.
+      (echo ':t
+  /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
+      if test -z "$ac_sed_cmds"; then
+  	ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
+      else
+  	ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
+      fi
+      ac_sed_frag=`expr $ac_sed_frag + 1`
+      ac_beg=$ac_end
+      ac_end=`expr $ac_end + $ac_max_sed_lines`
+    fi
+  done
+  if test -z "$ac_sed_cmds"; then
+    ac_sed_cmds=cat
+  fi
+fi # test -n "$CONFIG_FILES"
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
+  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+  case $ac_file in
+  - | *:- | *:-:* ) # input from stdin
+        cat >$tmp/stdin
+        ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+        ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+  *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+        ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+  * )   ac_file_in=$ac_file.in ;;
+  esac
+
+  # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
+  ac_dir=`(dirname "$ac_file") 2>/dev/null ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+         X"$ac_file" : 'X\(//\)[^/]' \| \
+         X"$ac_file" : 'X\(//\)$' \| \
+         X"$ac_file" : 'X\(/\)' \| \
+         .     : '\(.\)' 2>/dev/null ||
+echo X"$ac_file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+  { if $as_mkdir_p; then
+    mkdir -p "$ac_dir"
+  else
+    as_dir="$ac_dir"
+    as_dirs=
+    while test ! -d "$as_dir"; do
+      as_dirs="$as_dir $as_dirs"
+      as_dir=`(dirname "$as_dir") 2>/dev/null ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+         X"$as_dir" : 'X\(//\)[^/]' \| \
+         X"$as_dir" : 'X\(//\)$' \| \
+         X"$as_dir" : 'X\(/\)' \| \
+         .     : '\(.\)' 2>/dev/null ||
+echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+    done
+    test ! -n "$as_dirs" || mkdir $as_dirs
+  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
+echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
+   { (exit 1); exit 1; }; }; }
+
+  ac_builddir=.
+
+if test "$ac_dir" != .; then
+  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+  # A "../" for each directory in $ac_dir_suffix.
+  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
+else
+  ac_dir_suffix= ac_top_builddir=
+fi
+
+case $srcdir in
+  .)  # No --srcdir option.  We are building in place.
+    ac_srcdir=.
+    if test -z "$ac_top_builddir"; then
+       ac_top_srcdir=.
+    else
+       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
+    fi ;;
+  [\\/]* | ?:[\\/]* )  # Absolute path.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir ;;
+  *) # Relative path.
+    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_builddir$srcdir ;;
+esac
+# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be
+# absolute.
+ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd`
+ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd`
+ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd`
+ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd`
+
+
+  case $INSTALL in
+  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+  *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
+  esac
+
+  if test x"$ac_file" != x-; then
+    { echo "$as_me:$LINENO: creating $ac_file" >&5
+echo "$as_me: creating $ac_file" >&6;}
+    rm -f "$ac_file"
+  fi
+  # Let's still pretend it is `configure' which instantiates (i.e., don't
+  # use $as_me), people would be surprised to read:
+  #    /* config.h.  Generated by config.status.  */
+  if test x"$ac_file" = x-; then
+    configure_input=
+  else
+    configure_input="$ac_file.  "
+  fi
+  configure_input=$configure_input"Generated from `echo $ac_file_in |
+                                     sed 's,.*/,,'` by configure."
+
+  # First look for the input files in the build tree, otherwise in the
+  # src tree.
+  ac_file_inputs=`IFS=:
+    for f in $ac_file_in; do
+      case $f in
+      -) echo $tmp/stdin ;;
+      [\\/$]*)
+         # Absolute (can't be DOS-style, as IFS=:)
+         test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+   { (exit 1); exit 1; }; }
+         echo $f;;
+      *) # Relative
+         if test -f "$f"; then
+           # Build tree
+           echo $f
+         elif test -f "$srcdir/$f"; then
+           # Source tree
+           echo $srcdir/$f
+         else
+           # /dev/null tree
+           { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+   { (exit 1); exit 1; }; }
+         fi;;
+      esac
+    done` || { (exit 1); exit 1; }
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+  sed "$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s,@configure_input@,$configure_input,;t t
+s,@srcdir@,$ac_srcdir,;t t
+s,@abs_srcdir@,$ac_abs_srcdir,;t t
+s,@top_srcdir@,$ac_top_srcdir,;t t
+s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t
+s,@builddir@,$ac_builddir,;t t
+s,@abs_builddir@,$ac_abs_builddir,;t t
+s,@top_builddir@,$ac_top_builddir,;t t
+s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
+s,@INSTALL@,$ac_INSTALL,;t t
+" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
+  rm -f $tmp/stdin
+  if test x"$ac_file" != x-; then
+    mv $tmp/out $ac_file
+  else
+    cat $tmp/out
+    rm -f $tmp/out
+  fi
+
+done
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+
+#
+# CONFIG_HEADER section.
+#
+
+# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
+# NAME is the cpp macro being defined and VALUE is the value it is being given.
+#
+# ac_d sets the value in "#define NAME VALUE" lines.
+ac_dA='s,^\([ 	]*\)#\([ 	]*define[ 	][ 	]*\)'
+ac_dB='[ 	].*$,\1#\2'
+ac_dC=' '
+ac_dD=',;t'
+# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
+ac_uA='s,^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
+ac_uB='$,\1#\2define\3'
+ac_uC=' '
+ac_uD=',;t'
+
+for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue
+  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+  case $ac_file in
+  - | *:- | *:-:* ) # input from stdin
+        cat >$tmp/stdin
+        ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+        ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+  *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+        ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+  * )   ac_file_in=$ac_file.in ;;
+  esac
+
+  test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5
+echo "$as_me: creating $ac_file" >&6;}
+
+  # First look for the input files in the build tree, otherwise in the
+  # src tree.
+  ac_file_inputs=`IFS=:
+    for f in $ac_file_in; do
+      case $f in
+      -) echo $tmp/stdin ;;
+      [\\/$]*)
+         # Absolute (can't be DOS-style, as IFS=:)
+         test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+   { (exit 1); exit 1; }; }
+         echo $f;;
+      *) # Relative
+         if test -f "$f"; then
+           # Build tree
+           echo $f
+         elif test -f "$srcdir/$f"; then
+           # Source tree
+           echo $srcdir/$f
+         else
+           # /dev/null tree
+           { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+   { (exit 1); exit 1; }; }
+         fi;;
+      esac
+    done` || { (exit 1); exit 1; }
+  # Remove the trailing spaces.
+  sed 's/[ 	]*$//' $ac_file_inputs >$tmp/in
+
+_ACEOF
+
+# Transform confdefs.h into two sed scripts, `conftest.defines' and
+# `conftest.undefs', that substitutes the proper values into
+# config.h.in to produce config.h.  The first handles `#define'
+# templates, and the second `#undef' templates.
+# And first: Protect against being on the right side of a sed subst in
+# config.status.  Protect against being in an unquoted here document
+# in config.status.
+rm -f conftest.defines conftest.undefs
+# Using a here document instead of a string reduces the quoting nightmare.
+# Putting comments in sed scripts is not portable.
+#
+# `end' is used to avoid that the second main sed command (meant for
+# 0-ary CPP macros) applies to n-ary macro definitions.
+# See the Autoconf documentation for `clear'.
+cat >confdef2sed.sed <<\_ACEOF
+s/[\\&,]/\\&/g
+s,[\\$`],\\&,g
+t clear
+: clear
+s,^[ 	]*#[ 	]*define[ 	][ 	]*\([^ 	(][^ 	(]*\)\(([^)]*)\)[ 	]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp
+t end
+s,^[ 	]*#[ 	]*define[ 	][ 	]*\([^ 	][^ 	]*\)[ 	]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp
+: end
+_ACEOF
+# If some macros were called several times there might be several times
+# the same #defines, which is useless.  Nevertheless, we may not want to
+# sort them, since we want the *last* AC-DEFINE to be honored.
+uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines
+sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs
+rm -f confdef2sed.sed
+
+# This sed command replaces #undef with comments.  This is necessary, for
+# example, in the case of _POSIX_SOURCE, which is predefined and required
+# on some systems where configure will not decide to define it.
+cat >>conftest.undefs <<\_ACEOF
+s,^[ 	]*#[ 	]*undef[ 	][ 	]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */,
+_ACEOF
+
+# Break up conftest.defines because some shells have a limit on the size
+# of here documents, and old seds have small limits too (100 cmds).
+echo '  # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS
+echo '  if grep "^[ 	]*#[ 	]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS
+echo '  # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS
+echo '  :' >>$CONFIG_STATUS
+rm -f conftest.tail
+while grep . conftest.defines >/dev/null
+do
+  # Write a limited-size here document to $tmp/defines.sed.
+  echo '  cat >$tmp/defines.sed <<CEOF' >>$CONFIG_STATUS
+  # Speed up: don't consider the non `#define' lines.
+  echo '/^[ 	]*#[ 	]*define/!b' >>$CONFIG_STATUS
+  # Work around the forget-to-reset-the-flag bug.
+  echo 't clr' >>$CONFIG_STATUS
+  echo ': clr' >>$CONFIG_STATUS
+  sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS
+  echo 'CEOF
+  sed -f $tmp/defines.sed $tmp/in >$tmp/out
+  rm -f $tmp/in
+  mv $tmp/out $tmp/in
+' >>$CONFIG_STATUS
+  sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail
+  rm -f conftest.defines
+  mv conftest.tail conftest.defines
+done
+rm -f conftest.defines
+echo '  fi # grep' >>$CONFIG_STATUS
+echo >>$CONFIG_STATUS
+
+# Break up conftest.undefs because some shells have a limit on the size
+# of here documents, and old seds have small limits too (100 cmds).
+echo '  # Handle all the #undef templates' >>$CONFIG_STATUS
+rm -f conftest.tail
+while grep . conftest.undefs >/dev/null
+do
+  # Write a limited-size here document to $tmp/undefs.sed.
+  echo '  cat >$tmp/undefs.sed <<CEOF' >>$CONFIG_STATUS
+  # Speed up: don't consider the non `#undef'
+  echo '/^[ 	]*#[ 	]*undef/!b' >>$CONFIG_STATUS
+  # Work around the forget-to-reset-the-flag bug.
+  echo 't clr' >>$CONFIG_STATUS
+  echo ': clr' >>$CONFIG_STATUS
+  sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS
+  echo 'CEOF
+  sed -f $tmp/undefs.sed $tmp/in >$tmp/out
+  rm -f $tmp/in
+  mv $tmp/out $tmp/in
+' >>$CONFIG_STATUS
+  sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail
+  rm -f conftest.undefs
+  mv conftest.tail conftest.undefs
+done
+rm -f conftest.undefs
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+  # Let's still pretend it is `configure' which instantiates (i.e., don't
+  # use $as_me), people would be surprised to read:
+  #    /* config.h.  Generated by config.status.  */
+  if test x"$ac_file" = x-; then
+    echo "/* Generated by configure.  */" >$tmp/config.h
+  else
+    echo "/* $ac_file.  Generated by configure.  */" >$tmp/config.h
+  fi
+  cat $tmp/in >>$tmp/config.h
+  rm -f $tmp/in
+  if test x"$ac_file" != x-; then
+    if diff $ac_file $tmp/config.h >/dev/null 2>&1; then
+      { echo "$as_me:$LINENO: $ac_file is unchanged" >&5
+echo "$as_me: $ac_file is unchanged" >&6;}
+    else
+      ac_dir=`(dirname "$ac_file") 2>/dev/null ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+         X"$ac_file" : 'X\(//\)[^/]' \| \
+         X"$ac_file" : 'X\(//\)$' \| \
+         X"$ac_file" : 'X\(/\)' \| \
+         .     : '\(.\)' 2>/dev/null ||
+echo X"$ac_file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+      { if $as_mkdir_p; then
+    mkdir -p "$ac_dir"
+  else
+    as_dir="$ac_dir"
+    as_dirs=
+    while test ! -d "$as_dir"; do
+      as_dirs="$as_dir $as_dirs"
+      as_dir=`(dirname "$as_dir") 2>/dev/null ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+         X"$as_dir" : 'X\(//\)[^/]' \| \
+         X"$as_dir" : 'X\(//\)$' \| \
+         X"$as_dir" : 'X\(/\)' \| \
+         .     : '\(.\)' 2>/dev/null ||
+echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+    done
+    test ! -n "$as_dirs" || mkdir $as_dirs
+  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
+echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
+   { (exit 1); exit 1; }; }; }
+
+      rm -f $ac_file
+      mv $tmp/config.h $ac_file
+    fi
+  else
+    cat $tmp/config.h
+    rm -f $tmp/config.h
+  fi
+_am_stamp_count=`expr ${_am_stamp_count-0} + 1`
+echo "timestamp for $ac_file" >`(dirname $ac_file) 2>/dev/null ||
+$as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+         X$ac_file : 'X\(//\)[^/]' \| \
+         X$ac_file : 'X\(//\)$' \| \
+         X$ac_file : 'X\(/\)' \| \
+         .     : '\(.\)' 2>/dev/null ||
+echo X$ac_file |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`/stamp-h$_am_stamp_count
+done
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+
+#
+# CONFIG_COMMANDS section.
+#
+for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue
+  ac_dest=`echo "$ac_file" | sed 's,:.*,,'`
+  ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'`
+  ac_dir=`(dirname "$ac_dest") 2>/dev/null ||
+$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+         X"$ac_dest" : 'X\(//\)[^/]' \| \
+         X"$ac_dest" : 'X\(//\)$' \| \
+         X"$ac_dest" : 'X\(/\)' \| \
+         .     : '\(.\)' 2>/dev/null ||
+echo X"$ac_dest" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+  ac_builddir=.
+
+if test "$ac_dir" != .; then
+  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+  # A "../" for each directory in $ac_dir_suffix.
+  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
+else
+  ac_dir_suffix= ac_top_builddir=
+fi
+
+case $srcdir in
+  .)  # No --srcdir option.  We are building in place.
+    ac_srcdir=.
+    if test -z "$ac_top_builddir"; then
+       ac_top_srcdir=.
+    else
+       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
+    fi ;;
+  [\\/]* | ?:[\\/]* )  # Absolute path.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir ;;
+  *) # Relative path.
+    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_builddir$srcdir ;;
+esac
+# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be
+# absolute.
+ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd`
+ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd`
+ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd`
+ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd`
+
+
+  { echo "$as_me:$LINENO: executing $ac_dest commands" >&5
+echo "$as_me: executing $ac_dest commands" >&6;}
+  case $ac_dest in
+    depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
+  # Strip MF so we end up with the name of the file.
+  mf=`echo "$mf" | sed -e 's/:.*$//'`
+  # Check whether this is an Automake generated Makefile or not.
+  # We used to match only the files named `Makefile.in', but
+  # some people rename them; so instead we look at the file content.
+  # Grep'ing the first line is not enough: some people post-process
+  # each Makefile.in and add a new line on top of each file to say so.
+  # So let's grep whole file.
+  if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
+    dirpart=`(dirname "$mf") 2>/dev/null ||
+$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+         X"$mf" : 'X\(//\)[^/]' \| \
+         X"$mf" : 'X\(//\)$' \| \
+         X"$mf" : 'X\(/\)' \| \
+         .     : '\(.\)' 2>/dev/null ||
+echo X"$mf" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+  else
+    continue
+  fi
+  grep '^DEP_FILES *= *[^ #]' < "$mf" > /dev/null || continue
+  # Extract the definition of DEP_FILES from the Makefile without
+  # running `make'.
+  DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"`
+  test -z "$DEPDIR" && continue
+  # When using ansi2knr, U may be empty or an underscore; expand it
+  U=`sed -n -e '/^U = / s///p' < "$mf"`
+  test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR"
+  # We invoke sed twice because it is the simplest approach to
+  # changing $(DEPDIR) to its actual value in the expansion.
+  for file in `sed -n -e '
+    /^DEP_FILES = .*\\\\$/ {
+      s/^DEP_FILES = //
+      :loop
+	s/\\\\$//
+	p
+	n
+	/\\\\$/ b loop
+      p
+    }
+    /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \
+       sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+    # Make sure the directory exists.
+    test -f "$dirpart/$file" && continue
+    fdir=`(dirname "$file") 2>/dev/null ||
+$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+         X"$file" : 'X\(//\)[^/]' \| \
+         X"$file" : 'X\(//\)$' \| \
+         X"$file" : 'X\(/\)' \| \
+         .     : '\(.\)' 2>/dev/null ||
+echo X"$file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+    { if $as_mkdir_p; then
+    mkdir -p $dirpart/$fdir
+  else
+    as_dir=$dirpart/$fdir
+    as_dirs=
+    while test ! -d "$as_dir"; do
+      as_dirs="$as_dir $as_dirs"
+      as_dir=`(dirname "$as_dir") 2>/dev/null ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+         X"$as_dir" : 'X\(//\)[^/]' \| \
+         X"$as_dir" : 'X\(//\)$' \| \
+         X"$as_dir" : 'X\(/\)' \| \
+         .     : '\(.\)' 2>/dev/null ||
+echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+    done
+    test ! -n "$as_dirs" || mkdir $as_dirs
+  fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5
+echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;}
+   { (exit 1); exit 1; }; }; }
+
+    # echo "creating $dirpart/$file"
+    echo '# dummy' > "$dirpart/$file"
+  done
+done
+ ;;
+  esac
+done
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+
+{ (exit 0); exit 0; }
+_ACEOF
+chmod +x $CONFIG_STATUS
+ac_clean_files=$ac_clean_files_save
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded.  So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status.  When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+  ac_cs_success=:
+  ac_config_status_args=
+  test "$silent" = yes &&
+    ac_config_status_args="$ac_config_status_args --quiet"
+  exec 5>/dev/null
+  $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+  exec 5>>config.log
+  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+  # would make configure fail if this is the last instruction.
+  $ac_cs_success || { (exit 1); exit 1; }
+fi
 
diff --git a/configure.ac b/configure.ac
new file mode 100644
index 0000000..0dff105
--- /dev/null
+++ b/configure.ac
@@ -0,0 +1,41 @@
+# Process this file with autoconf to produce a configure script.
+m4_define(PNGPKG_VERSION,[1.2.8-automake])
+AC_INIT([libpng], PNGPKG_VERSION, png-implement@ccrc.wustl.edu)
+AM_INIT_AUTOMAKE([libpng], PNGPKG_VERSION)
+AC_CONFIG_SRCDIR([pngget.c])
+AM_CONFIG_HEADER([config.h])
+
+# Checks for programs.
+AC_PROG_CC
+AC_PROG_MAKE_SET
+AC_PROG_LIBTOOL
+
+# Checks for header files.
+AC_PATH_X
+AC_HEADER_STDC
+AC_CHECK_HEADERS([fcntl.h malloc.h stdlib.h string.h strings.h unistd.h])
+
+# Checks for typedefs, structures, and compiler characteristics.
+AC_C_CONST
+AC_TYPE_SIZE_T
+AC_STRUCT_TM
+
+# Checks for library functions.
+AC_FUNC_MALLOC
+AC_FUNC_STRTOD
+
+AC_CHECK_FUNCS([memset pow strrchr])
+AC_CHECK_FUNC(sqrt, , AC_CHECK_LIB(m, sqrt,, [cannot find sqrt]))
+AC_CHECK_LIB(z, zlibVersion,, AC_ERROR([ZLib not installed]))
+
+AC_ARG_WITH(pkgconfigdir, AC_HELP_STRING([--with-pkgconfigdir],[Use the specified pkgconfig dir (default is prefix/lib/pkgconfig)]),[PKGCONFIGDIR=${withval}],[PKGCONFIGDIR='${prefix}/lib/pkgconfig'])
+
+AC_MSG_CHECKING([pkgconfig directory])
+AC_MSG_RESULT([$PKGCONFIGDIR])
+AC_SUBST([PKGCONFIGDIR])
+
+AC_SUBST(LIBPNG12_VERSION_INFO,0:0:0)
+AC_SUBST(LIBPNG3_VERSION_INFO,3:0:0)
+
+AC_CONFIG_FILES([Makefile])
+AC_OUTPUT
diff --git a/depcomp b/depcomp
new file mode 100755
index 0000000..807b991
--- /dev/null
+++ b/depcomp
@@ -0,0 +1,423 @@
+#! /bin/sh
+
+# depcomp - compile a program generating dependencies as side-effects
+# Copyright 1999, 2000 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
+
+if test -z "$depmode" || test -z "$source" || test -z "$object"; then
+  echo "depcomp: Variables source, object and depmode must be set" 1>&2
+  exit 1
+fi
+# `libtool' can also be set to `yes' or `no'.
+
+if test -z "$depfile"; then
+   base=`echo "$object" | sed -e 's,^.*/,,' -e 's,\.\([^.]*\)$,.P\1,'`
+   dir=`echo "$object" | sed 's,/.*$,/,'`
+   if test "$dir" = "$object"; then
+      dir=
+   fi
+   # FIXME: should be _deps on DOS.
+   depfile="$dir.deps/$base"
+fi
+
+tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
+
+rm -f "$tmpdepfile"
+
+# Some modes work just like other modes, but use different flags.  We
+# parameterize here, but still list the modes in the big case below,
+# to make depend.m4 easier to write.  Note that we *cannot* use a case
+# here, because this file can only contain one case statement.
+if test "$depmode" = hp; then
+  # HP compiler uses -M and no extra arg.
+  gccflag=-M
+  depmode=gcc
+fi
+
+if test "$depmode" = dashXmstdout; then
+   # This is just like dashmstdout with a different argument.
+   dashmflag=-xM
+   depmode=dashmstdout
+fi
+
+case "$depmode" in
+gcc3)
+## gcc 3 implements dependency tracking that does exactly what
+## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
+## it if -MD -MP comes after the -MF stuff.  Hmm.
+  "$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  mv "$tmpdepfile" "$depfile"
+  ;;
+
+gcc)
+## There are various ways to get dependency output from gcc.  Here's
+## why we pick this rather obscure method:
+## - Don't want to use -MD because we'd like the dependencies to end
+##   up in a subdir.  Having to rename by hand is ugly.
+##   (We might end up doing this anyway to support other compilers.)
+## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
+##   -MM, not -M (despite what the docs say).
+## - Using -M directly means running the compiler twice (even worse
+##   than renaming).
+  if test -z "$gccflag"; then
+    gccflag=-MD,
+  fi
+  "$@" -Wp,"$gccflag$tmpdepfile"
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
+## The second -e expression handles DOS-style file names with drive letters.
+  sed -e 's/^[^:]*: / /' \
+      -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
+## This next piece of magic avoids the `deleted header file' problem.
+## The problem is that when a header file which appears in a .P file
+## is deleted, the dependency causes make to die (because there is
+## typically no way to rebuild the header).  We avoid this by adding
+## dummy dependencies for each header file.  Too bad gcc doesn't do
+## this for us directly.
+  tr ' ' '
+' < "$tmpdepfile" |
+## Some versions of gcc put a space before the `:'.  On the theory
+## that the space means something, we add a space to the output as
+## well.
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+hp)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+sgi)
+  if test "$libtool" = yes; then
+    "$@" "-Wp,-MDupdate,$tmpdepfile"
+  else
+    "$@" -MDupdate "$tmpdepfile"
+  fi
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+
+  if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
+    echo "$object : \\" > "$depfile"
+
+    # Clip off the initial element (the dependent).  Don't try to be
+    # clever and replace this with sed code, as IRIX sed won't handle
+    # lines with more than a fixed number of characters (4096 in
+    # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
+    # the IRIX cc adds comments like `#:fec' to the end of the
+    # dependency line.
+    tr ' ' '
+' < "$tmpdepfile" \
+    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
+    tr '
+' ' ' >> $depfile
+    echo >> $depfile
+
+    # The second pass generates a dummy entry for each header file.
+    tr ' ' '
+' < "$tmpdepfile" \
+   | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+   >> $depfile
+  else
+    # The sourcefile does not contain any dependencies, so just
+    # store a dummy comment line, to avoid errors with the Makefile
+    # "include basename.Plo" scheme.
+    echo "#dummy" > "$depfile"
+  fi
+  rm -f "$tmpdepfile"
+  ;;
+
+aix)
+  # The C for AIX Compiler uses -M and outputs the dependencies
+  # in a .u file.  This file always lives in the current directory.
+  # Also, the AIX compiler puts `$object:' at the start of each line;
+  # $object doesn't have directory information.
+  stripped=`echo "$object" | sed -e 's,^.*/,,' -e 's/\(.*\)\..*$/\1/'`
+  tmpdepfile="$stripped.u"
+  outname="$stripped.o"
+  if test "$libtool" = yes; then
+    "$@" -Wc,-M
+  else
+    "$@" -M
+  fi
+
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+
+  if test -f "$tmpdepfile"; then
+    # Each line is of the form `foo.o: dependent.h'.
+    # Do two passes, one to just change these to
+    # `$object: dependent.h' and one to simply `dependent.h:'.
+    sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
+    sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
+  else
+    # The sourcefile does not contain any dependencies, so just
+    # store a dummy comment line, to avoid errors with the Makefile
+    # "include basename.Plo" scheme.
+    echo "#dummy" > "$depfile"
+  fi
+  rm -f "$tmpdepfile"
+  ;;
+
+tru64)
+   # The Tru64 compiler uses -MD to generate dependencies as a side
+   # effect.  `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
+   # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+   # dependencies in `foo.d' instead, so we check for that too.
+   # Subdirectories are respected.
+   dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+   test "x$dir" = "x$object" && dir=
+   base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+
+   if test "$libtool" = yes; then
+      tmpdepfile1="$dir.libs/$base.lo.d"
+      tmpdepfile2="$dir.libs/$base.d"
+      "$@" -Wc,-MD
+   else
+      tmpdepfile1="$dir$base.o.d"
+      tmpdepfile2="$dir$base.d"
+      "$@" -MD
+   fi
+
+   stat=$?
+   if test $stat -eq 0; then :
+   else
+      rm -f "$tmpdepfile1" "$tmpdepfile2"
+      exit $stat
+   fi
+
+   if test -f "$tmpdepfile1"; then
+      tmpdepfile="$tmpdepfile1"
+   else
+      tmpdepfile="$tmpdepfile2"
+   fi
+   if test -f "$tmpdepfile"; then
+      sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+      # That's a space and a tab in the [].
+      sed -e 's,^.*\.[a-z]*:[ 	]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+   else
+      echo "#dummy" > "$depfile"
+   fi
+   rm -f "$tmpdepfile"
+   ;;
+
+#nosideeffect)
+  # This comment above is used by automake to tell side-effect
+  # dependency tracking mechanisms from slower ones.
+
+dashmstdout)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the proprocessed file to stdout, regardless of -o.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test $1 != '--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  # Remove `-o $object'.  We will use -o /dev/null later,
+  # however we can't do the remplacement now because
+  # `-o $object' might simply not be used
+  IFS=" "
+  for arg
+  do
+    case $arg in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    *)
+      set fnord "$@" "$arg"
+      shift # fnord
+      shift # $arg
+      ;;
+    esac
+  done
+
+  test -z "$dashmflag" && dashmflag=-M
+  "$@" -o /dev/null $dashmflag | sed 's:^[^:]*\:[ 	]*:'"$object"'\: :' > "$tmpdepfile"
+  rm -f "$depfile"
+  cat < "$tmpdepfile" > "$depfile"
+  tr ' ' '
+' < "$tmpdepfile" | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+dashXmstdout)
+  # This case only exists to satisfy depend.m4.  It is never actually
+  # run, as this mode is specially recognized in the preamble.
+  exit 1
+  ;;
+
+makedepend)
+  "$@" || exit $?
+  # X makedepend
+  shift
+  cleared=no
+  for arg in "$@"; do
+    case $cleared in
+    no)
+      set ""; shift
+      cleared=yes ;;
+    esac
+    case "$arg" in
+    -D*|-I*)
+      set fnord "$@" "$arg"; shift ;;
+    -*)
+      ;;
+    *)
+      set fnord "$@" "$arg"; shift ;;
+    esac
+  done
+  obj_suffix="`echo $object | sed 's/^.*\././'`"
+  touch "$tmpdepfile"
+  ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
+  rm -f "$depfile"
+  cat < "$tmpdepfile" > "$depfile"
+  sed '1,2d' "$tmpdepfile" | tr ' ' '
+' | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile" "$tmpdepfile".bak
+  ;;
+
+cpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the proprocessed file to stdout.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test $1 != '--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  # Remove `-o $object'.
+  IFS=" "
+  for arg
+  do
+    case $arg in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    *)
+      set fnord "$@" "$arg"
+      shift # fnord
+      shift # $arg
+      ;;
+    esac
+  done
+
+  "$@" -E |
+    sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
+    sed '$ s: \\$::' > "$tmpdepfile"
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  cat < "$tmpdepfile" >> "$depfile"
+  sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+msvisualcpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the proprocessed file to stdout, regardless of -o,
+  # because we must use -o when running libtool.
+  "$@" || exit $?
+  IFS=" "
+  for arg
+  do
+    case "$arg" in
+    "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
+	set fnord "$@"
+	shift
+	shift
+	;;
+    *)
+	set fnord "$@" "$arg"
+	shift
+	shift
+	;;
+    esac
+  done
+  "$@" -E |
+  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
+  echo "	" >> "$depfile"
+  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+none)
+  exec "$@"
+  ;;
+
+*)
+  echo "Unknown depmode $depmode" 1>&2
+  exit 1
+  ;;
+esac
+
+exit 0
diff --git a/install-sh b/install-sh
new file mode 100755
index 0000000..36f96f3
--- /dev/null
+++ b/install-sh
@@ -0,0 +1,276 @@
+#!/bin/sh
+#
+# install - install a program, script, or datafile
+# This comes from X11R5 (mit/util/scripts/install.sh).
+#
+# Copyright 1991 by the Massachusetts Institute of Technology
+#
+# Permission to use, copy, modify, distribute, and sell this software and its
+# documentation for any purpose is hereby granted without fee, provided that
+# the above copyright notice appear in all copies and that both that
+# copyright notice and this permission notice appear in supporting
+# documentation, and that the name of M.I.T. not be used in advertising or
+# publicity pertaining to distribution of the software without specific,
+# written prior permission.  M.I.T. makes no representations about the
+# suitability of this software for any purpose.  It is provided "as is"
+# without express or implied warranty.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.  It can only install one file at a time, a restriction
+# shared with many OS's install programs.
+
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+
+
+# put in absolute paths if you don't have them in your path; or use env. vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+
+transformbasename=""
+transform_arg=""
+instcmd="$mvprog"
+chmodcmd="$chmodprog 0755"
+chowncmd=""
+chgrpcmd=""
+stripcmd=""
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=""
+dst=""
+dir_arg=""
+
+while [ x"$1" != x ]; do
+    case $1 in
+	-c) instcmd=$cpprog
+	    shift
+	    continue;;
+
+	-d) dir_arg=true
+	    shift
+	    continue;;
+
+	-m) chmodcmd="$chmodprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-o) chowncmd="$chownprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-g) chgrpcmd="$chgrpprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-s) stripcmd=$stripprog
+	    shift
+	    continue;;
+
+	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
+	    shift
+	    continue;;
+
+	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
+	    shift
+	    continue;;
+
+	*)  if [ x"$src" = x ]
+	    then
+		src=$1
+	    else
+		# this colon is to work around a 386BSD /bin/sh bug
+		:
+		dst=$1
+	    fi
+	    shift
+	    continue;;
+    esac
+done
+
+if [ x"$src" = x ]
+then
+	echo "$0: no input file specified" >&2
+	exit 1
+else
+	:
+fi
+
+if [ x"$dir_arg" != x ]; then
+	dst=$src
+	src=""
+
+	if [ -d "$dst" ]; then
+		instcmd=:
+		chmodcmd=""
+	else
+		instcmd=$mkdirprog
+	fi
+else
+
+# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
+# might cause directories to be created, which would be especially bad
+# if $src (and thus $dsttmp) contains '*'.
+
+	if [ -f "$src" ] || [ -d "$src" ]
+	then
+		:
+	else
+		echo "$0: $src does not exist" >&2
+		exit 1
+	fi
+
+	if [ x"$dst" = x ]
+	then
+		echo "$0: no destination specified" >&2
+		exit 1
+	else
+		:
+	fi
+
+# If destination is a directory, append the input filename; if your system
+# does not like double slashes in filenames, you may need to add some logic
+
+	if [ -d "$dst" ]
+	then
+		dst=$dst/`basename "$src"`
+	else
+		:
+	fi
+fi
+
+## this sed command emulates the dirname command
+dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+
+# Make sure that the destination directory exists.
+#  this part is taken from Noah Friedman's mkinstalldirs script
+
+# Skip lots of stat calls in the usual case.
+if [ ! -d "$dstdir" ]; then
+defaultIFS='
+	'
+IFS="${IFS-$defaultIFS}"
+
+oIFS=$IFS
+# Some sh's can't handle IFS=/ for some reason.
+IFS='%'
+set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
+IFS=$oIFS
+
+pathcomp=''
+
+while [ $# -ne 0 ] ; do
+	pathcomp=$pathcomp$1
+	shift
+
+	if [ ! -d "$pathcomp" ] ;
+        then
+		$mkdirprog "$pathcomp"
+	else
+		:
+	fi
+
+	pathcomp=$pathcomp/
+done
+fi
+
+if [ x"$dir_arg" != x ]
+then
+	$doit $instcmd "$dst" &&
+
+	if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dst"; else : ; fi &&
+	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dst"; else : ; fi &&
+	if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dst"; else : ; fi &&
+	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dst"; else : ; fi
+else
+
+# If we're going to rename the final executable, determine the name now.
+
+	if [ x"$transformarg" = x ]
+	then
+		dstfile=`basename "$dst"`
+	else
+		dstfile=`basename "$dst" $transformbasename |
+			sed $transformarg`$transformbasename
+	fi
+
+# don't allow the sed command to completely eliminate the filename
+
+	if [ x"$dstfile" = x ]
+	then
+		dstfile=`basename "$dst"`
+	else
+		:
+	fi
+
+# Make a couple of temp file names in the proper directory.
+
+	dsttmp=$dstdir/#inst.$$#
+	rmtmp=$dstdir/#rm.$$#
+
+# Trap to clean up temp files at exit.
+
+	trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0
+	trap '(exit $?); exit' 1 2 13 15
+
+# Move or copy the file name to the temp name
+
+	$doit $instcmd "$src" "$dsttmp" &&
+
+# and set any options; do chmod last to preserve setuid bits
+
+# If any of these fail, we abort the whole thing.  If we want to
+# ignore errors from any of these, just make sure not to ignore
+# errors from the above "$doit $instcmd $src $dsttmp" command.
+
+	if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dsttmp"; else :;fi &&
+	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dsttmp"; else :;fi &&
+	if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dsttmp"; else :;fi &&
+	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dsttmp"; else :;fi &&
+
+# Now remove or move aside any old file at destination location.  We try this
+# two ways since rm can't unlink itself on some systems and the destination
+# file might be busy for other reasons.  In this case, the final cleanup
+# might fail but the new file should still install successfully.
+
+{
+	if [ -f "$dstdir/$dstfile" ]
+	then
+		$doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null ||
+		$doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null ||
+		{
+		  echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
+		  (exit 1); exit
+		}
+	else
+		:
+	fi
+} &&
+
+# Now rename the file to the real destination.
+
+	$doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
+
+fi &&
+
+# The final little trick to "correctly" pass the exit status to the exit trap.
+
+{
+	(exit 0); exit
+}
diff --git a/libpng.3 b/libpng.3
index 3b855c3..1feceee 100644
--- a/libpng.3
+++ b/libpng.3
@@ -1,6 +1,6 @@
-.TH LIBPNG 3 "November 29, 2004"
+.TH LIBPNG 3 "December 3, 2004"
 .SH NAME
-libpng \- Portable Network Graphics (PNG) Reference Library 1.2.8rc5
+libpng \- Portable Network Graphics (PNG) Reference Library 1.2.8
 .SH SYNOPSIS
 \fI\fB
 
@@ -781,7 +781,7 @@
 .SH LIBPNG.TXT
 libpng.txt - A description on how to use and modify libpng
 
- libpng version 1.2.8rc5 - November 29, 2004
+ libpng version 1.2.8 - December 3, 2004
  Updated and distributed by Glenn Randers-Pehrson
  <glennrp at users.sourceforge.net>
  Copyright (c) 1998-2004 Glenn Randers-Pehrson
@@ -3685,13 +3685,13 @@
 
 .SH IX. Y2K Compliance in libpng
 
-November 29, 2004
+December 3, 2004
 
 Since the PNG Development group is an ad-hoc body, we can't make
 an official declaration.
 
 This is your unofficial assurance that libpng from version 0.71 and
-upward through 1.2.8rc5 are Y2K compliant.  It is my belief that earlier
+upward through 1.2.8 are Y2K compliant.  It is my belief that earlier
 versions were also Y2K compliant.
 
 Libpng only has three year fields.  One is a 2-byte unsigned integer that
@@ -3842,6 +3842,8 @@
  1.2.8beta1-5        13    10208  12.so.0.1.2.8beta1-5
  1.0.18rc1-5         10    10018  12.so.0.1.0.18rc1-5
  1.2.8rc1-5          13    10208  12.so.0.1.2.8rc1-5
+ 1.0.18              10    10018  12.so.0.1.0.18
+ 1.2.8               13    10208  12.so.0.1.2.8
 
 Henceforth the source version will match the shared-library minor
 and patch numbers; the shared-library major version number will be
@@ -3897,7 +3899,7 @@
 
 Thanks to Frank J. T. Wojcik for helping with the documentation.
 
-Libpng version 1.2.8rc5 - November 29, 2004:
+Libpng version 1.2.8 - December 3, 2004:
 Initially created in 1995 by Guy Eric Schalnat, then of Group 42, Inc.
 Currently maintained by Glenn Randers-Pehrson (glennrp at users.sourceforge.net).
 
@@ -3915,7 +3917,7 @@
 If you modify libpng you may insert additional notices immediately following
 this sentence.
 
-libpng version 1.2.6, November 29, 2004, is
+libpng version 1.2.6, December 3, 2004, is
 Copyright (c) 2004 Glenn Randers-Pehrson, and is
 distributed according to the same disclaimer and license as libpng-1.2.5
 with the following individual added to the list of Contributing Authors
@@ -4014,7 +4016,7 @@
 
 Glenn Randers-Pehrson
 glennrp at users.sourceforge.net
-November 29, 2004
+December 3, 2004
 
 .\" end of man page
 
diff --git a/libpng.txt b/libpng.txt
index c678d64..9360f33 100644
--- a/libpng.txt
+++ b/libpng.txt
@@ -1,6 +1,6 @@
 libpng.txt - A description on how to use and modify libpng
 
- libpng version 1.2.8rc5 - November 29, 2004
+ libpng version 1.2.8 - December 3, 2004
  Updated and distributed by Glenn Randers-Pehrson
  <glennrp at users.sourceforge.net>
  Copyright (c) 1998-2004 Glenn Randers-Pehrson
@@ -2904,13 +2904,13 @@
 
 IX. Y2K Compliance in libpng
 
-November 29, 2004
+December 3, 2004
 
 Since the PNG Development group is an ad-hoc body, we can't make
 an official declaration.
 
 This is your unofficial assurance that libpng from version 0.71 and
-upward through 1.2.8rc5 are Y2K compliant.  It is my belief that earlier
+upward through 1.2.8 are Y2K compliant.  It is my belief that earlier
 versions were also Y2K compliant.
 
 Libpng only has three year fields.  One is a 2-byte unsigned integer that
diff --git a/libpngpf.3 b/libpngpf.3
index a3e7253..d196d70 100644
--- a/libpngpf.3
+++ b/libpngpf.3
@@ -1,6 +1,6 @@
-.TH LIBPNGPF 3 "November 29, 2004"
+.TH LIBPNGPF 3 "December 3, 2004"
 .SH NAME
-libpng \- Portable Network Graphics (PNG) Reference Library 1.2.8rc5
+libpng \- Portable Network Graphics (PNG) Reference Library 1.2.8
 (private functions)
 .SH SYNOPSIS
 \fB\fB#include <png.h>\fP\fP
diff --git a/ltmain.sh b/ltmain.sh
new file mode 100644
index 0000000..6fc6900
--- /dev/null
+++ b/ltmain.sh
@@ -0,0 +1,5107 @@
+# ltmain.sh - Provide generalized library-building support services.
+# NOTE: Changing this file will not affect anything until you rerun configure.
+#
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
+# Free Software Foundation, Inc.
+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Check that we have a working $echo.
+if test "X$1" = X--no-reexec; then
+  # Discard the --no-reexec flag, and continue.
+  shift
+elif test "X$1" = X--fallback-echo; then
+  # Avoid inline document here, it may be left over
+  :
+elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
+  # Yippee, $echo works!
+  :
+else
+  # Restart under the correct shell, and then maybe $echo will work.
+  exec $SHELL "$0" --no-reexec ${1+"$@"}
+fi
+
+if test "X$1" = X--fallback-echo; then
+  # used as fallback echo
+  shift
+  cat <<EOF
+$*
+EOF
+  exit 0
+fi
+
+# The name of this program.
+progname=`$echo "$0" | ${SED} 's%^.*/%%'`
+modename="$progname"
+
+# Constants.
+PROGRAM=ltmain.sh
+PACKAGE=libtool
+VERSION=1.4.3
+TIMESTAMP=" (1.922.2.111 2002/10/23 02:54:36)"
+
+default_mode=
+help="Try \`$progname --help' for more information."
+magic="%%%MAGIC variable%%%"
+mkdir="mkdir"
+mv="mv -f"
+rm="rm -f"
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed="${SED}"' -e 1s/^X//'
+sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
+# test EBCDIC or ASCII                                                         
+case `echo A|od -x` in                                                         
+ *[Cc]1*) # EBCDIC based system                                                
+  SP2NL="tr '\100' '\n'"                                                       
+  NL2SP="tr '\r\n' '\100\100'"                                                 
+  ;;                                                                           
+ *) # Assume ASCII based system                                                
+  SP2NL="tr '\040' '\012'"                                                     
+  NL2SP="tr '\015\012' '\040\040'"                                             
+  ;;                                                                           
+esac                                                                           
+
+# NLS nuisances.
+# Only set LANG and LC_ALL to C if already set.
+# These must not be set unconditionally because not all systems understand
+# e.g. LANG=C (notably SCO).
+# We save the old values to restore during execute mode.
+if test "${LC_ALL+set}" = set; then
+  save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL
+fi
+if test "${LANG+set}" = set; then
+  save_LANG="$LANG"; LANG=C; export LANG
+fi
+
+# Make sure IFS has a sensible default
+: ${IFS=" 	"}
+
+if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+  echo "$modename: not configured to build any kind of library" 1>&2
+  echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
+  exit 1
+fi
+
+# Global variables.
+mode=$default_mode
+nonopt=
+prev=
+prevopt=
+run=
+show="$echo"
+show_help=
+execute_dlfiles=
+lo2o="s/\\.lo\$/.${objext}/"
+o2lo="s/\\.${objext}\$/.lo/"
+
+# Parse our command line options once, thoroughly.
+while test $# -gt 0
+do
+  arg="$1"
+  shift
+
+  case $arg in
+  -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
+  *) optarg= ;;
+  esac
+
+  # If the previous option needs an argument, assign it.
+  if test -n "$prev"; then
+    case $prev in
+    execute_dlfiles)
+      execute_dlfiles="$execute_dlfiles $arg"
+      ;;
+    *)
+      eval "$prev=\$arg"
+      ;;
+    esac
+
+    prev=
+    prevopt=
+    continue
+  fi
+
+  # Have we seen a non-optional argument yet?
+  case $arg in
+  --help)
+    show_help=yes
+    ;;
+
+  --version)
+    echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
+    exit 0
+    ;;
+
+  --config)
+    ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $0
+    exit 0
+    ;;
+
+  --debug)
+    echo "$progname: enabling shell trace mode"
+    set -x
+    ;;
+
+  --dry-run | -n)
+    run=:
+    ;;
+
+  --features)
+    echo "host: $host"
+    if test "$build_libtool_libs" = yes; then
+      echo "enable shared libraries"
+    else
+      echo "disable shared libraries"
+    fi
+    if test "$build_old_libs" = yes; then
+      echo "enable static libraries"
+    else
+      echo "disable static libraries"
+    fi
+    exit 0
+    ;;
+
+  --finish) mode="finish" ;;
+
+  --mode) prevopt="--mode" prev=mode ;;
+  --mode=*) mode="$optarg" ;;
+
+  --preserve-dup-deps) duplicate_deps="yes" ;;
+
+  --quiet | --silent)
+    show=:
+    ;;
+
+  -dlopen)
+    prevopt="-dlopen"
+    prev=execute_dlfiles
+    ;;
+
+  -*)
+    $echo "$modename: unrecognized option \`$arg'" 1>&2
+    $echo "$help" 1>&2
+    exit 1
+    ;;
+
+  *)
+    nonopt="$arg"
+    break
+    ;;
+  esac
+done
+
+if test -n "$prevopt"; then
+  $echo "$modename: option \`$prevopt' requires an argument" 1>&2
+  $echo "$help" 1>&2
+  exit 1
+fi
+
+# If this variable is set in any of the actions, the command in it
+# will be execed at the end.  This prevents here-documents from being
+# left over by shells.
+exec_cmd=
+
+if test -z "$show_help"; then
+
+  # Infer the operation mode.
+  if test -z "$mode"; then
+    case $nonopt in
+    *cc | *++ | gcc* | *-gcc* | g++* | xlc*)
+      mode=link
+      for arg
+      do
+	case $arg in
+	-c)
+	   mode=compile
+	   break
+	   ;;
+	esac
+      done
+      ;;
+    *db | *dbx | *strace | *truss)
+      mode=execute
+      ;;
+    *install*|cp|mv)
+      mode=install
+      ;;
+    *rm)
+      mode=uninstall
+      ;;
+    *)
+      # If we have no mode, but dlfiles were specified, then do execute mode.
+      test -n "$execute_dlfiles" && mode=execute
+
+      # Just use the default operation mode.
+      if test -z "$mode"; then
+	if test -n "$nonopt"; then
+	  $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2
+	else
+	  $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2
+	fi
+      fi
+      ;;
+    esac
+  fi
+
+  # Only execute mode is allowed to have -dlopen flags.
+  if test -n "$execute_dlfiles" && test "$mode" != execute; then
+    $echo "$modename: unrecognized option \`-dlopen'" 1>&2
+    $echo "$help" 1>&2
+    exit 1
+  fi
+
+  # Change the help message to a mode-specific one.
+  generic_help="$help"
+  help="Try \`$modename --help --mode=$mode' for more information."
+
+  # These modes are in order of execution frequency so that they run quickly.
+  case $mode in
+  # libtool compile mode
+  compile)
+    modename="$modename: compile"
+    # Get the compilation command and the source file.
+    base_compile=
+    prev=
+    lastarg=
+    srcfile="$nonopt"
+    suppress_output=
+
+    user_target=no
+    for arg
+    do
+      case $prev in
+      "") ;;
+      xcompiler)
+	# Aesthetically quote the previous argument.
+	prev=
+	lastarg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+
+	case $arg in
+	# Double-quote args containing other shell metacharacters.
+	# Many Bourne shells cannot handle close brackets correctly
+	# in scan sets, so we specify it separately.
+	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	  arg="\"$arg\""
+	  ;;
+	esac
+
+	# Add the previous argument to base_compile.
+	if test -z "$base_compile"; then
+	  base_compile="$lastarg"
+	else
+	  base_compile="$base_compile $lastarg"
+	fi
+	continue
+	;;
+      esac
+
+      # Accept any command-line options.
+      case $arg in
+      -o)
+	if test "$user_target" != "no"; then
+	  $echo "$modename: you cannot specify \`-o' more than once" 1>&2
+	  exit 1
+	fi
+	user_target=next
+	;;
+
+      -static)
+	build_old_libs=yes
+	continue
+	;;
+
+      -prefer-pic)
+	pic_mode=yes
+	continue
+	;;
+
+      -prefer-non-pic)
+	pic_mode=no
+	continue
+	;;
+
+      -Xcompiler)
+	prev=xcompiler
+	continue
+	;;
+
+      -Wc,*)
+	args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
+	lastarg=
+	save_ifs="$IFS"; IFS=','
+	for arg in $args; do
+	  IFS="$save_ifs"
+
+	  # Double-quote args containing other shell metacharacters.
+	  # Many Bourne shells cannot handle close brackets correctly
+	  # in scan sets, so we specify it separately.
+	  case $arg in
+	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	    arg="\"$arg\""
+	    ;;
+	  esac
+	  lastarg="$lastarg $arg"
+	done
+	IFS="$save_ifs"
+	lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"`
+
+	# Add the arguments to base_compile.
+	if test -z "$base_compile"; then
+	  base_compile="$lastarg"
+	else
+	  base_compile="$base_compile $lastarg"
+	fi
+	continue
+	;;
+      esac
+
+      case $user_target in
+      next)
+	# The next one is the -o target name
+	user_target=yes
+	continue
+	;;
+      yes)
+	# We got the output file
+	user_target=set
+	libobj="$arg"
+	continue
+	;;
+      esac
+
+      # Accept the current argument as the source file.
+      lastarg="$srcfile"
+      srcfile="$arg"
+
+      # Aesthetically quote the previous argument.
+
+      # Backslashify any backslashes, double quotes, and dollar signs.
+      # These are the only characters that are still specially
+      # interpreted inside of double-quoted scrings.
+      lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
+
+      # Double-quote args containing other shell metacharacters.
+      # Many Bourne shells cannot handle close brackets correctly
+      # in scan sets, so we specify it separately.
+      case $lastarg in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	lastarg="\"$lastarg\""
+	;;
+      esac
+
+      # Add the previous argument to base_compile.
+      if test -z "$base_compile"; then
+	base_compile="$lastarg"
+      else
+	base_compile="$base_compile $lastarg"
+      fi
+    done
+
+    case $user_target in
+    set)
+      ;;
+    no)
+      # Get the name of the library object.
+      libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
+      ;;
+    *)
+      $echo "$modename: you must specify a target with \`-o'" 1>&2
+      exit 1
+      ;;
+    esac
+
+    # Recognize several different file suffixes.
+    # If the user specifies -o file.o, it is replaced with file.lo
+    xform='[cCFSfmso]'
+    case $libobj in
+    *.ada) xform=ada ;;
+    *.adb) xform=adb ;;
+    *.ads) xform=ads ;;
+    *.asm) xform=asm ;;
+    *.c++) xform=c++ ;;
+    *.cc) xform=cc ;;
+    *.cpp) xform=cpp ;;
+    *.cxx) xform=cxx ;;
+    *.f90) xform=f90 ;;
+    *.for) xform=for ;;
+    esac
+
+    libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
+
+    case $libobj in
+    *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
+    *)
+      $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
+      exit 1
+      ;;
+    esac
+
+    if test -z "$base_compile"; then
+      $echo "$modename: you must specify a compilation command" 1>&2
+      $echo "$help" 1>&2
+      exit 1
+    fi
+
+    # Delete any leftover library objects.
+    if test "$build_old_libs" = yes; then
+      removelist="$obj $libobj"
+    else
+      removelist="$libobj"
+    fi
+
+    $run $rm $removelist
+    trap "$run $rm $removelist; exit 1" 1 2 15
+
+    # On Cygwin there's no "real" PIC flag so we must build both object types
+    case $host_os in
+    cygwin* | mingw* | pw32* | os2*)
+      pic_mode=default
+      ;;
+    esac
+    if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
+      # non-PIC code in shared libraries is not supported
+      pic_mode=default
+    fi
+
+    # Calculate the filename of the output object if compiler does
+    # not support -o with -c
+    if test "$compiler_c_o" = no; then
+      output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
+      lockfile="$output_obj.lock"
+      removelist="$removelist $output_obj $lockfile"
+      trap "$run $rm $removelist; exit 1" 1 2 15
+    else
+      need_locks=no
+      lockfile=
+    fi
+
+    # Lock this critical section if it is needed
+    # We use this script file to make the link, it avoids creating a new file
+    if test "$need_locks" = yes; then
+      until $run ln "$0" "$lockfile" 2>/dev/null; do
+	$show "Waiting for $lockfile to be removed"
+	sleep 2
+      done
+    elif test "$need_locks" = warn; then
+      if test -f "$lockfile"; then
+	echo "\
+*** ERROR, $lockfile exists and contains:
+`cat $lockfile 2>/dev/null`
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$run $rm $removelist
+	exit 1
+      fi
+      echo $srcfile > "$lockfile"
+    fi
+
+    if test -n "$fix_srcfile_path"; then
+      eval srcfile=\"$fix_srcfile_path\"
+    fi
+
+    # Only build a PIC object if we are building libtool libraries.
+    if test "$build_libtool_libs" = yes; then
+      # Without this assignment, base_compile gets emptied.
+      fbsd_hideous_sh_bug=$base_compile
+
+      if test "$pic_mode" != no; then
+	# All platforms use -DPIC, to notify preprocessed assembler code.
+	command="$base_compile $srcfile $pic_flag -DPIC"
+      else
+	# Don't build PIC code
+	command="$base_compile $srcfile"
+      fi
+      if test "$build_old_libs" = yes; then
+	lo_libobj="$libobj"
+	dir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'`
+	if test "X$dir" = "X$libobj"; then
+	  dir="$objdir"
+	else
+	  dir="$dir/$objdir"
+	fi
+	libobj="$dir/"`$echo "X$libobj" | $Xsed -e 's%^.*/%%'`
+
+	if test -d "$dir"; then
+	  $show "$rm $libobj"
+	  $run $rm $libobj
+	else
+	  $show "$mkdir $dir"
+	  $run $mkdir $dir
+	  status=$?
+	  if test $status -ne 0 && test ! -d $dir; then
+	    exit $status
+	  fi
+	fi
+      fi
+      if test "$compiler_o_lo" = yes; then
+	output_obj="$libobj"
+	command="$command -o $output_obj"
+      elif test "$compiler_c_o" = yes; then
+	output_obj="$obj"
+	command="$command -o $output_obj"
+      fi
+
+      $run $rm "$output_obj"
+      $show "$command"
+      if $run eval "$command"; then :
+      else
+	test -n "$output_obj" && $run $rm $removelist
+	exit 1
+      fi
+
+      if test "$need_locks" = warn &&
+	 test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then
+	echo "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$run $rm $removelist
+	exit 1
+      fi
+
+      # Just move the object if needed, then go on to compile the next one
+      if test x"$output_obj" != x"$libobj"; then
+	$show "$mv $output_obj $libobj"
+	if $run $mv $output_obj $libobj; then :
+	else
+	  error=$?
+	  $run $rm $removelist
+	  exit $error
+	fi
+      fi
+
+      # If we have no pic_flag, then copy the object into place and finish.
+      if (test -z "$pic_flag" || test "$pic_mode" != default) &&
+	 test "$build_old_libs" = yes; then
+	# Rename the .lo from within objdir to obj
+	if test -f $obj; then
+	  $show $rm $obj
+	  $run $rm $obj
+	fi
+
+	$show "$mv $libobj $obj"
+	if $run $mv $libobj $obj; then :
+	else
+	  error=$?
+	  $run $rm $removelist
+	  exit $error
+	fi
+
+	xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
+	if test "X$xdir" = "X$obj"; then
+	  xdir="."
+	else
+	  xdir="$xdir"
+	fi
+	baseobj=`$echo "X$obj" | $Xsed -e "s%.*/%%"`
+	libobj=`$echo "X$baseobj" | $Xsed -e "$o2lo"`
+	# Now arrange that obj and lo_libobj become the same file
+	$show "(cd $xdir && $LN_S $baseobj $libobj)"
+	if $run eval '(cd $xdir && $LN_S $baseobj $libobj)'; then
+	  # Unlock the critical section if it was locked
+	  if test "$need_locks" != no; then
+	    $run $rm "$lockfile"
+	  fi
+	  exit 0
+	else
+	  error=$?
+	  $run $rm $removelist
+	  exit $error
+	fi
+      fi
+
+      # Allow error messages only from the first compilation.
+      suppress_output=' >/dev/null 2>&1'
+    fi
+
+    # Only build a position-dependent object if we build old libraries.
+    if test "$build_old_libs" = yes; then
+      if test "$pic_mode" != yes; then
+	# Don't build PIC code
+	command="$base_compile $srcfile"
+      else
+	# All platforms use -DPIC, to notify preprocessed assembler code.
+	command="$base_compile $srcfile $pic_flag -DPIC"
+      fi
+      if test "$compiler_c_o" = yes; then
+	command="$command -o $obj"
+	output_obj="$obj"
+      fi
+
+      # Suppress compiler output if we already did a PIC compilation.
+      command="$command$suppress_output"
+      $run $rm "$output_obj"
+      $show "$command"
+      if $run eval "$command"; then :
+      else
+	$run $rm $removelist
+	exit 1
+      fi
+
+      if test "$need_locks" = warn &&
+	 test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then
+	echo "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$run $rm $removelist
+	exit 1
+      fi
+
+      # Just move the object if needed
+      if test x"$output_obj" != x"$obj"; then
+	$show "$mv $output_obj $obj"
+	if $run $mv $output_obj $obj; then :
+	else
+	  error=$?
+	  $run $rm $removelist
+	  exit $error
+	fi
+      fi
+
+      # Create an invalid libtool object if no PIC, so that we do not
+      # accidentally link it into a program.
+      if test "$build_libtool_libs" != yes; then
+	$show "echo timestamp > $libobj"
+	$run eval "echo timestamp > \$libobj" || exit $?
+      else
+	# Move the .lo from within objdir
+	$show "$mv $libobj $lo_libobj"
+	if $run $mv $libobj $lo_libobj; then :
+	else
+	  error=$?
+	  $run $rm $removelist
+	  exit $error
+	fi
+      fi
+    fi
+
+    # Unlock the critical section if it was locked
+    if test "$need_locks" != no; then
+      $run $rm "$lockfile"
+    fi
+
+    exit 0
+    ;;
+
+  # libtool link mode
+  link | relink)
+    modename="$modename: link"
+    case $host in
+    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+      # It is impossible to link a dll without this setting, and
+      # we shouldn't force the makefile maintainer to figure out
+      # which system we are compiling for in order to pass an extra
+      # flag for every libtool invokation.
+      # allow_undefined=no
+
+      # FIXME: Unfortunately, there are problems with the above when trying
+      # to make a dll which has undefined symbols, in which case not
+      # even a static library is built.  For now, we need to specify
+      # -no-undefined on the libtool link line when we can be certain
+      # that all symbols are satisfied, otherwise we get a static library.
+      allow_undefined=yes
+      ;;
+    *)
+      allow_undefined=yes
+      ;;
+    esac
+    libtool_args="$nonopt"
+    compile_command="$nonopt"
+    finalize_command="$nonopt"
+
+    compile_rpath=
+    finalize_rpath=
+    compile_shlibpath=
+    finalize_shlibpath=
+    convenience=
+    old_convenience=
+    deplibs=
+    old_deplibs=
+    compiler_flags=
+    linker_flags=
+    dllsearchpath=
+    lib_search_path=`pwd`
+    inst_prefix_dir=
+
+    avoid_version=no
+    dlfiles=
+    dlprefiles=
+    dlself=no
+    export_dynamic=no
+    export_symbols=
+    export_symbols_regex=
+    generated=
+    libobjs=
+    ltlibs=
+    module=no
+    no_install=no
+    objs=
+    prefer_static_libs=no
+    preload=no
+    prev=
+    prevarg=
+    release=
+    rpath=
+    xrpath=
+    perm_rpath=
+    temp_rpath=
+    thread_safe=no
+    vinfo=
+
+    # We need to know -static, to get the right output filenames.
+    for arg
+    do
+      case $arg in
+      -all-static | -static)
+	if test "X$arg" = "X-all-static"; then
+	  if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
+	    $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
+	  fi
+	  if test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	else
+	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	fi
+	build_libtool_libs=no
+	build_old_libs=yes
+	prefer_static_libs=yes
+	break
+	;;
+      esac
+    done
+
+    # See if our shared archives depend on static archives.
+    test -n "$old_archive_from_new_cmds" && build_old_libs=yes
+
+    # Go through the arguments, transforming them on the way.
+    while test $# -gt 0; do
+      arg="$1"
+      shift
+      case $arg in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test
+	;;
+      *) qarg=$arg ;;
+      esac
+      libtool_args="$libtool_args $qarg"
+
+      # If the previous option needs an argument, assign it.
+      if test -n "$prev"; then
+	case $prev in
+	output)
+	  compile_command="$compile_command @OUTPUT@"
+	  finalize_command="$finalize_command @OUTPUT@"
+	  ;;
+	esac
+
+	case $prev in
+	dlfiles|dlprefiles)
+	  if test "$preload" = no; then
+	    # Add the symbol object into the linking commands.
+	    compile_command="$compile_command @SYMFILE@"
+	    finalize_command="$finalize_command @SYMFILE@"
+	    preload=yes
+	  fi
+	  case $arg in
+	  *.la | *.lo) ;;  # We handle these cases below.
+	  force)
+	    if test "$dlself" = no; then
+	      dlself=needless
+	      export_dynamic=yes
+	    fi
+	    prev=
+	    continue
+	    ;;
+	  self)
+	    if test "$prev" = dlprefiles; then
+	      dlself=yes
+	    elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
+	      dlself=yes
+	    else
+	      dlself=needless
+	      export_dynamic=yes
+	    fi
+	    prev=
+	    continue
+	    ;;
+	  *)
+	    if test "$prev" = dlfiles; then
+	      dlfiles="$dlfiles $arg"
+	    else
+	      dlprefiles="$dlprefiles $arg"
+	    fi
+	    prev=
+	    continue
+	    ;;
+	  esac
+	  ;;
+	expsyms)
+	  export_symbols="$arg"
+	  if test ! -f "$arg"; then
+	    $echo "$modename: symbol file \`$arg' does not exist"
+	    exit 1
+	  fi
+	  prev=
+	  continue
+	  ;;
+	expsyms_regex)
+	  export_symbols_regex="$arg"
+	  prev=
+	  continue
+	  ;;
+	inst_prefix)
+	  inst_prefix_dir="$arg"
+	  prev=
+	  continue
+	  ;;
+	release)
+	  release="-$arg"
+	  prev=
+	  continue
+	  ;;
+	rpath | xrpath)
+	  # We need an absolute path.
+	  case $arg in
+	  [\\/]* | [A-Za-z]:[\\/]*) ;;
+	  *)
+	    $echo "$modename: only absolute run-paths are allowed" 1>&2
+	    exit 1
+	    ;;
+	  esac
+	  if test "$prev" = rpath; then
+	    case "$rpath " in
+	    *" $arg "*) ;;
+	    *) rpath="$rpath $arg" ;;
+	    esac
+	  else
+	    case "$xrpath " in
+	    *" $arg "*) ;;
+	    *) xrpath="$xrpath $arg" ;;
+	    esac
+	  fi
+	  prev=
+	  continue
+	  ;;
+	xcompiler)
+	  compiler_flags="$compiler_flags $qarg"
+	  prev=
+	  compile_command="$compile_command $qarg"
+	  finalize_command="$finalize_command $qarg"
+	  continue
+	  ;;
+	xlinker)
+	  linker_flags="$linker_flags $qarg"
+	  compiler_flags="$compiler_flags $wl$qarg"
+	  prev=
+	  compile_command="$compile_command $wl$qarg"
+	  finalize_command="$finalize_command $wl$qarg"
+	  continue
+	  ;;
+	*)
+	  eval "$prev=\"\$arg\""
+	  prev=
+	  continue
+	  ;;
+	esac
+      fi # test -n $prev
+
+      prevarg="$arg"
+
+      case $arg in
+      -all-static)
+	if test -n "$link_static_flag"; then
+	  compile_command="$compile_command $link_static_flag"
+	  finalize_command="$finalize_command $link_static_flag"
+	fi
+	continue
+	;;
+
+      -allow-undefined)
+	# FIXME: remove this flag sometime in the future.
+	$echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2
+	continue
+	;;
+
+      -avoid-version)
+	avoid_version=yes
+	continue
+	;;
+
+      -dlopen)
+	prev=dlfiles
+	continue
+	;;
+
+      -dlpreopen)
+	prev=dlprefiles
+	continue
+	;;
+
+      -export-dynamic)
+	export_dynamic=yes
+	continue
+	;;
+
+      -export-symbols | -export-symbols-regex)
+	if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+	  $echo "$modename: more than one -exported-symbols argument is not allowed"
+	  exit 1
+	fi
+	if test "X$arg" = "X-export-symbols"; then
+	  prev=expsyms
+	else
+	  prev=expsyms_regex
+	fi
+	continue
+	;;
+
+      -inst-prefix-dir)
+       prev=inst_prefix
+       continue
+       ;;
+
+      # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
+      # so, if we see these flags be careful not to treat them like -L
+      -L[A-Z][A-Z]*:*)
+	case $with_gcc/$host in
+	no/*-*-irix* | no/*-*-nonstopux*)
+	  compile_command="$compile_command $arg"
+	  finalize_command="$finalize_command $arg"
+	  ;;
+	esac
+	continue
+	;;
+
+      -L*)
+	dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`
+	# We need an absolute path.
+	case $dir in
+	[\\/]* | [A-Za-z]:[\\/]*) ;;
+	*)
+	  absdir=`cd "$dir" && pwd`
+	  if test -z "$absdir"; then
+	    $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
+	    exit 1
+	  fi
+	  dir="$absdir"
+	  ;;
+	esac
+	case "$deplibs " in
+	*" -L$dir "*) ;;
+	*)
+	  deplibs="$deplibs -L$dir"
+	  lib_search_path="$lib_search_path $dir"
+	  ;;
+	esac
+	case $host in
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+	  case :$dllsearchpath: in
+	  *":$dir:"*) ;;
+	  *) dllsearchpath="$dllsearchpath:$dir";;
+	  esac
+	  ;;
+	esac
+	continue
+	;;
+
+      -l*)
+	if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
+	  case $host in
+	  *-*-cygwin* | *-*-pw32* | *-*-beos*)
+	    # These systems don't actually have a C or math library (as such)
+	    continue
+	    ;;
+	  *-*-mingw* | *-*-os2*)
+	    # These systems don't actually have a C library (as such)
+	    test "X$arg" = "X-lc" && continue
+	    ;;
+	  *-*-openbsd* | *-*-freebsd*)
+	    # Do not include libc due to us having libc/libc_r.
+	    test "X$arg" = "X-lc" && continue
+	    ;;
+	  esac
+	 elif test "X$arg" = "X-lc_r"; then
+	  case $host in
+	 *-*-openbsd* | *-*-freebsd*)
+	    # Do not include libc_r directly, use -pthread flag.
+	    continue
+	    ;;
+	  esac
+	fi
+	deplibs="$deplibs $arg"
+	continue
+	;;
+
+      -module)
+	module=yes
+	continue
+	;;
+
+      -no-fast-install)
+	fast_install=no
+	continue
+	;;
+
+      -no-install)
+	case $host in
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+	  # The PATH hackery in wrapper scripts is required on Windows
+	  # in order for the loader to find any dlls it needs.
+	  $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2
+	  $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2
+	  fast_install=no
+	  ;;
+	*) no_install=yes ;;
+	esac
+	continue
+	;;
+
+      -no-undefined)
+	allow_undefined=no
+	continue
+	;;
+
+      -o) prev=output ;;
+
+      -release)
+	prev=release
+	continue
+	;;
+
+      -rpath)
+	prev=rpath
+	continue
+	;;
+
+      -R)
+	prev=xrpath
+	continue
+	;;
+
+      -R*)
+	dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`
+	# We need an absolute path.
+	case $dir in
+	[\\/]* | [A-Za-z]:[\\/]*) ;;
+	*)
+	  $echo "$modename: only absolute run-paths are allowed" 1>&2
+	  exit 1
+	  ;;
+	esac
+	case "$xrpath " in
+	*" $dir "*) ;;
+	*) xrpath="$xrpath $dir" ;;
+	esac
+	continue
+	;;
+
+      -static)
+	# The effects of -static are defined in a previous loop.
+	# We used to do the same as -all-static on platforms that
+	# didn't have a PIC flag, but the assumption that the effects
+	# would be equivalent was wrong.  It would break on at least
+	# Digital Unix and AIX.
+	continue
+	;;
+
+      -thread-safe)
+	thread_safe=yes
+	continue
+	;;
+
+      -version-info)
+	prev=vinfo
+	continue
+	;;
+
+      -Wc,*)
+	args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'`
+	arg=
+	save_ifs="$IFS"; IFS=','
+	for flag in $args; do
+	  IFS="$save_ifs"
+	  case $flag in
+	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	    flag="\"$flag\""
+	    ;;
+	  esac
+	  arg="$arg $wl$flag"
+	  compiler_flags="$compiler_flags $flag"
+	done
+	IFS="$save_ifs"
+	arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
+	;;
+
+      -Wl,*)
+	args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'`
+	arg=
+	save_ifs="$IFS"; IFS=','
+	for flag in $args; do
+	  IFS="$save_ifs"
+	  case $flag in
+	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	    flag="\"$flag\""
+	    ;;
+	  esac
+	  arg="$arg $wl$flag"
+	  compiler_flags="$compiler_flags $wl$flag"
+	  linker_flags="$linker_flags $flag"
+	done
+	IFS="$save_ifs"
+	arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
+	;;
+
+      -Xcompiler)
+	prev=xcompiler
+	continue
+	;;
+
+      -Xlinker)
+	prev=xlinker
+	continue
+	;;
+
+      # Some other compiler flag.
+      -* | +*)
+	# Unknown arguments in both finalize_command and compile_command need
+	# to be aesthetically quoted because they are evaled later.
+	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+	case $arg in
+	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	  arg="\"$arg\""
+	  ;;
+	esac
+	;;
+
+      *.lo | *.$objext)
+	# A library or standard object.
+	if test "$prev" = dlfiles; then
+	  # This file was specified with -dlopen.
+	  if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+	    dlfiles="$dlfiles $arg"
+	    prev=
+	    continue
+	  else
+	    # If libtool objects are unsupported, then we need to preload.
+	    prev=dlprefiles
+	  fi
+	fi
+
+	if test "$prev" = dlprefiles; then
+	  # Preload the old-style object.
+	  dlprefiles="$dlprefiles "`$echo "X$arg" | $Xsed -e "$lo2o"`
+	  prev=
+	else
+	  case $arg in
+	  *.lo) libobjs="$libobjs $arg" ;;
+	  *) objs="$objs $arg" ;;
+	  esac
+	fi
+	;;
+
+      *.$libext)
+	# An archive.
+	deplibs="$deplibs $arg"
+	old_deplibs="$old_deplibs $arg"
+	continue
+	;;
+
+      *.la)
+	# A libtool-controlled library.
+
+	if test "$prev" = dlfiles; then
+	  # This library was specified with -dlopen.
+	  dlfiles="$dlfiles $arg"
+	  prev=
+	elif test "$prev" = dlprefiles; then
+	  # The library was specified with -dlpreopen.
+	  dlprefiles="$dlprefiles $arg"
+	  prev=
+	else
+	  deplibs="$deplibs $arg"
+	fi
+	continue
+	;;
+
+      # Some other compiler argument.
+      *)
+	# Unknown arguments in both finalize_command and compile_command need
+	# to be aesthetically quoted because they are evaled later.
+	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+	case $arg in
+	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	  arg="\"$arg\""
+	  ;;
+	esac
+	;;
+      esac # arg
+
+      # Now actually substitute the argument into the commands.
+      if test -n "$arg"; then
+	compile_command="$compile_command $arg"
+	finalize_command="$finalize_command $arg"
+      fi
+    done # argument parsing loop
+
+    if test -n "$prev"; then
+      $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
+      $echo "$help" 1>&2
+      exit 1
+    fi
+
+    if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
+      eval arg=\"$export_dynamic_flag_spec\"
+      compile_command="$compile_command $arg"
+      finalize_command="$finalize_command $arg"
+    fi
+
+    # calculate the name of the file, without its directory
+    outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
+    libobjs_save="$libobjs"
+
+    if test -n "$shlibpath_var"; then
+      # get the directories listed in $shlibpath_var
+      eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
+    else
+      shlib_search_path=
+    fi
+    eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
+    eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
+
+    output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
+    if test "X$output_objdir" = "X$output"; then
+      output_objdir="$objdir"
+    else
+      output_objdir="$output_objdir/$objdir"
+    fi
+    # Create the object directory.
+    if test ! -d $output_objdir; then
+      $show "$mkdir $output_objdir"
+      $run $mkdir $output_objdir
+      status=$?
+      if test $status -ne 0 && test ! -d $output_objdir; then
+	exit $status
+      fi
+    fi
+
+    # Determine the type of output
+    case $output in
+    "")
+      $echo "$modename: you must specify an output file" 1>&2
+      $echo "$help" 1>&2
+      exit 1
+      ;;
+    *.$libext) linkmode=oldlib ;;
+    *.lo | *.$objext) linkmode=obj ;;
+    *.la) linkmode=lib ;;
+    *) linkmode=prog ;; # Anything else should be a program.
+    esac
+
+    specialdeplibs=
+    libs=
+    # Find all interdependent deplibs by searching for libraries
+    # that are linked more than once (e.g. -la -lb -la)
+    for deplib in $deplibs; do
+      if test "X$duplicate_deps" = "Xyes" ; then
+	case "$libs " in
+	*" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+	esac
+      fi
+      libs="$libs $deplib"
+    done
+    deplibs=
+    newdependency_libs=
+    newlib_search_path=
+    need_relink=no # whether we're linking any uninstalled libtool libraries
+    notinst_deplibs= # not-installed libtool libraries
+    notinst_path= # paths that contain not-installed libtool libraries
+    case $linkmode in
+    lib)
+	passes="conv link"
+	for file in $dlfiles $dlprefiles; do
+	  case $file in
+	  *.la) ;;
+	  *)
+	    $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2
+	    exit 1
+	    ;;
+	  esac
+	done
+	;;
+    prog)
+	compile_deplibs=
+	finalize_deplibs=
+	alldeplibs=no
+	newdlfiles=
+	newdlprefiles=
+	passes="conv scan dlopen dlpreopen link"
+	;;
+    *)  passes="conv"
+	;;
+    esac
+    for pass in $passes; do
+      if test $linkmode = prog; then
+	# Determine which files to process
+	case $pass in
+	dlopen)
+	  libs="$dlfiles"
+	  save_deplibs="$deplibs" # Collect dlpreopened libraries
+	  deplibs=
+	  ;;
+	dlpreopen) libs="$dlprefiles" ;;
+	link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
+	esac
+      fi
+      for deplib in $libs; do
+	lib=
+	found=no
+	case $deplib in
+	-l*)
+	  if test $linkmode = oldlib && test $linkmode = obj; then
+	    $echo "$modename: warning: \`-l' is ignored for archives/objects: $deplib" 1>&2
+	    continue
+	  fi
+	  if test $pass = conv; then
+	    deplibs="$deplib $deplibs"
+	    continue
+	  fi
+	  name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
+	  for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
+	    # Search the libtool library
+	    lib="$searchdir/lib${name}.la"
+	    if test -f "$lib"; then
+	      found=yes
+	      break
+	    fi
+	  done
+	  if test "$found" != yes; then
+	    # deplib doesn't seem to be a libtool library
+	    if test "$linkmode,$pass" = "prog,link"; then
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    else
+	      deplibs="$deplib $deplibs"
+	      test $linkmode = lib && newdependency_libs="$deplib $newdependency_libs"
+	    fi
+	    continue
+	  fi
+	  ;; # -l
+	-L*)
+	  case $linkmode in
+	  lib)
+	    deplibs="$deplib $deplibs"
+	    test $pass = conv && continue
+	    newdependency_libs="$deplib $newdependency_libs"
+	    newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
+	    ;;
+	  prog)
+	    if test $pass = conv; then
+	      deplibs="$deplib $deplibs"
+	      continue
+	    fi
+	    if test $pass = scan; then
+	      deplibs="$deplib $deplibs"
+	      newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
+	    else
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    fi
+	    ;;
+	  *)
+	    $echo "$modename: warning: \`-L' is ignored for archives/objects: $deplib" 1>&2
+	    ;;
+	  esac # linkmode
+	  continue
+	  ;; # -L
+	-R*)
+	  if test $pass = link; then
+	    dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
+	    # Make sure the xrpath contains only unique directories.
+	    case "$xrpath " in
+	    *" $dir "*) ;;
+	    *) xrpath="$xrpath $dir" ;;
+	    esac
+	  fi
+	  deplibs="$deplib $deplibs"
+	  continue
+	  ;;
+	*.la) lib="$deplib" ;;
+	*.$libext)
+	  if test $pass = conv; then
+	    deplibs="$deplib $deplibs"
+	    continue
+	  fi
+	  case $linkmode in
+	  lib)
+	    if test "$deplibs_check_method" != pass_all; then
+	      echo
+	      echo "*** Warning: Trying to link with static lib archive $deplib."
+	      echo "*** I have the capability to make that library automatically link in when"
+	      echo "*** you link to this library.  But I can only do this if you have a"
+	      echo "*** shared version of the library, which you do not appear to have"
+	      echo "*** because the file extensions .$libext of this argument makes me believe"
+	      echo "*** that it is just a static archive that I should not used here."
+	    else
+	      echo
+	      echo "*** Warning: Linking the shared library $output against the"
+	      echo "*** static library $deplib is not portable!"
+	      deplibs="$deplib $deplibs"
+	    fi
+	    continue
+	    ;;
+	  prog)
+	    if test $pass != link; then
+	      deplibs="$deplib $deplibs"
+	    else
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    fi
+	    continue
+	    ;;
+	  esac # linkmode
+	  ;; # *.$libext
+	*.lo | *.$objext)
+	  if test $pass = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+	    # If there is no dlopen support or we're linking statically,
+	    # we need to preload.
+	    newdlprefiles="$newdlprefiles $deplib"
+	    compile_deplibs="$deplib $compile_deplibs"
+	    finalize_deplibs="$deplib $finalize_deplibs"
+	  else
+	    newdlfiles="$newdlfiles $deplib"
+	  fi
+	  continue
+	  ;;
+	%DEPLIBS%)
+	  alldeplibs=yes
+	  continue
+	  ;;
+	esac # case $deplib
+	if test $found = yes || test -f "$lib"; then :
+	else
+	  $echo "$modename: cannot find the library \`$lib'" 1>&2
+	  exit 1
+	fi
+
+	# Check to see that this really is a libtool archive.
+	if (${SED} -e '2q' $lib | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+	else
+	  $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+	  exit 1
+	fi
+
+	ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
+	test "X$ladir" = "X$lib" && ladir="."
+
+	dlname=
+	dlopen=
+	dlpreopen=
+	libdir=
+	library_names=
+	old_library=
+	# If the library was installed with an old release of libtool,
+	# it will not redefine variable installed.
+	installed=yes
+
+	# Read the .la file
+	case $lib in
+	*/* | *\\*) . $lib ;;
+	*) . ./$lib ;;
+	esac
+
+	if test "$linkmode,$pass" = "lib,link" ||
+	   test "$linkmode,$pass" = "prog,scan" ||
+	   { test $linkmode = oldlib && test $linkmode = obj; }; then
+	   # Add dl[pre]opened files of deplib
+	  test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
+	  test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
+	fi
+
+	if test $pass = conv; then
+	  # Only check for convenience libraries
+	  deplibs="$lib $deplibs"
+	  if test -z "$libdir"; then
+	    if test -z "$old_library"; then
+	      $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
+	      exit 1
+	    fi
+	    # It is a libtool convenience library, so add in its objects.
+	    convenience="$convenience $ladir/$objdir/$old_library"
+	    old_convenience="$old_convenience $ladir/$objdir/$old_library"
+	    tmp_libs=
+	    for deplib in $dependency_libs; do
+	      deplibs="$deplib $deplibs"
+              if test "X$duplicate_deps" = "Xyes" ; then
+	        case "$tmp_libs " in
+	        *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+	        esac
+              fi
+	      tmp_libs="$tmp_libs $deplib"
+	    done
+	  elif test $linkmode != prog && test $linkmode != lib; then
+	    $echo "$modename: \`$lib' is not a convenience library" 1>&2
+	    exit 1
+	  fi
+	  continue
+	fi # $pass = conv
+
+	# Get the name of the library we link against.
+	linklib=
+	for l in $old_library $library_names; do
+	  linklib="$l"
+	done
+	if test -z "$linklib"; then
+	  $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
+	  exit 1
+	fi
+
+	# This library was specified with -dlopen.
+	if test $pass = dlopen; then
+	  if test -z "$libdir"; then
+	    $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2
+	    exit 1
+	  fi
+	  if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+	    # If there is no dlname, no dlopen support or we're linking
+	    # statically, we need to preload.
+	    dlprefiles="$dlprefiles $lib"
+	  else
+	    newdlfiles="$newdlfiles $lib"
+	  fi
+	  continue
+	fi # $pass = dlopen
+
+	# We need an absolute path.
+	case $ladir in
+	[\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
+	*)
+	  abs_ladir=`cd "$ladir" && pwd`
+	  if test -z "$abs_ladir"; then
+	    $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2
+	    $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
+	    abs_ladir="$ladir"
+	  fi
+	  ;;
+	esac
+	laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
+
+	# Find the relevant object directory and library name.
+	if test "X$installed" = Xyes; then
+	  if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+	    $echo "$modename: warning: library \`$lib' was moved." 1>&2
+	    dir="$ladir"
+	    absdir="$abs_ladir"
+	    libdir="$abs_ladir"
+	  else
+	    dir="$libdir"
+	    absdir="$libdir"
+	  fi
+	else
+	  dir="$ladir/$objdir"
+	  absdir="$abs_ladir/$objdir"
+	  # Remove this search path later
+	  notinst_path="$notinst_path $abs_ladir"
+	fi # $installed = yes
+	name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
+
+	# This library was specified with -dlpreopen.
+	if test $pass = dlpreopen; then
+	  if test -z "$libdir"; then
+	    $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2
+	    exit 1
+	  fi
+	  # Prefer using a static library (so that no silly _DYNAMIC symbols
+	  # are required to link).
+	  if test -n "$old_library"; then
+	    newdlprefiles="$newdlprefiles $dir/$old_library"
+	  # Otherwise, use the dlname, so that lt_dlopen finds it.
+	  elif test -n "$dlname"; then
+	    newdlprefiles="$newdlprefiles $dir/$dlname"
+	  else
+	    newdlprefiles="$newdlprefiles $dir/$linklib"
+	  fi
+	fi # $pass = dlpreopen
+
+	if test -z "$libdir"; then
+	  # Link the convenience library
+	  if test $linkmode = lib; then
+	    deplibs="$dir/$old_library $deplibs"
+	  elif test "$linkmode,$pass" = "prog,link"; then
+	    compile_deplibs="$dir/$old_library $compile_deplibs"
+	    finalize_deplibs="$dir/$old_library $finalize_deplibs"
+	  else
+	    deplibs="$lib $deplibs"
+	  fi
+	  continue
+	fi
+
+	if test $linkmode = prog && test $pass != link; then
+	  newlib_search_path="$newlib_search_path $ladir"
+	  deplibs="$lib $deplibs"
+
+	  linkalldeplibs=no
+	  if test "$link_all_deplibs" != no || test -z "$library_names" ||
+	     test "$build_libtool_libs" = no; then
+	    linkalldeplibs=yes
+	  fi
+
+	  tmp_libs=
+	  for deplib in $dependency_libs; do
+	    case $deplib in
+	    -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test
+	    esac
+	    # Need to link against all dependency_libs?
+	    if test $linkalldeplibs = yes; then
+	      deplibs="$deplib $deplibs"
+	    else
+	      # Need to hardcode shared library paths
+	      # or/and link against static libraries
+	      newdependency_libs="$deplib $newdependency_libs"
+	    fi
+	    if test "X$duplicate_deps" = "Xyes" ; then
+	      case "$tmp_libs " in
+	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+	      esac
+	    fi
+	    tmp_libs="$tmp_libs $deplib"
+	  done # for deplib
+	  continue
+	fi # $linkmode = prog...
+
+	link_static=no # Whether the deplib will be linked statically
+	if test -n "$library_names" &&
+	   { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
+	  # Link against this shared library
+
+	  if test "$linkmode,$pass" = "prog,link" ||
+	   { test $linkmode = lib && test $hardcode_into_libs = yes; }; then
+	    # Hardcode the library path.
+	    # Skip directories that are in the system default run-time
+	    # search path.
+	    case " $sys_lib_dlsearch_path " in
+	    *" $absdir "*) ;;
+	    *)
+	      case "$compile_rpath " in
+	      *" $absdir "*) ;;
+	      *) compile_rpath="$compile_rpath $absdir"
+	      esac
+	      ;;
+	    esac
+	    case " $sys_lib_dlsearch_path " in
+	    *" $libdir "*) ;;
+	    *)
+	      case "$finalize_rpath " in
+	      *" $libdir "*) ;;
+	      *) finalize_rpath="$finalize_rpath $libdir"
+	      esac
+	      ;;
+	    esac
+	    if test $linkmode = prog; then
+	      # We need to hardcode the library path
+	      if test -n "$shlibpath_var"; then
+		# Make sure the rpath contains only unique directories.
+		case "$temp_rpath " in
+		*" $dir "*) ;;
+		*" $absdir "*) ;;
+		*) temp_rpath="$temp_rpath $dir" ;;
+		esac
+	      fi
+	    fi
+	  fi # $linkmode,$pass = prog,link...
+
+	  if test "$alldeplibs" = yes &&
+	     { test "$deplibs_check_method" = pass_all ||
+	       { test "$build_libtool_libs" = yes &&
+		 test -n "$library_names"; }; }; then
+	    # We only need to search for static libraries
+	    continue
+	  fi
+
+	  if test "$installed" = no; then
+	    notinst_deplibs="$notinst_deplibs $lib"
+	    need_relink=yes
+	  fi
+
+	  if test -n "$old_archive_from_expsyms_cmds"; then
+	    # figure out the soname
+	    set dummy $library_names
+	    realname="$2"
+	    shift; shift
+	    libname=`eval \\$echo \"$libname_spec\"`
+	    # use dlname if we got it. it's perfectly good, no?
+	    if test -n "$dlname"; then
+	      soname="$dlname"
+	    elif test -n "$soname_spec"; then
+	      # bleh windows
+	      case $host in
+	      *cygwin*)
+		major=`expr $current - $age`
+		versuffix="-$major"
+		;;
+	      esac
+	      eval soname=\"$soname_spec\"
+	    else
+	      soname="$realname"
+	    fi
+
+	    # Make a new name for the extract_expsyms_cmds to use
+	    soroot="$soname"
+	    soname=`echo $soroot | ${SED} -e 's/^.*\///'`
+	    newlib="libimp-`echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a"
+
+	    # If the library has no export list, then create one now
+	    if test -f "$output_objdir/$soname-def"; then :
+	    else
+	      $show "extracting exported symbol list from \`$soname'"
+	      save_ifs="$IFS"; IFS='~'
+	      eval cmds=\"$extract_expsyms_cmds\"
+	      for cmd in $cmds; do
+		IFS="$save_ifs"
+		$show "$cmd"
+		$run eval "$cmd" || exit $?
+	      done
+	      IFS="$save_ifs"
+	    fi
+
+	    # Create $newlib
+	    if test -f "$output_objdir/$newlib"; then :; else
+	      $show "generating import library for \`$soname'"
+	      save_ifs="$IFS"; IFS='~'
+	      eval cmds=\"$old_archive_from_expsyms_cmds\"
+	      for cmd in $cmds; do
+		IFS="$save_ifs"
+		$show "$cmd"
+		$run eval "$cmd" || exit $?
+	      done
+	      IFS="$save_ifs"
+	    fi
+	    # make sure the library variables are pointing to the new library
+	    dir=$output_objdir
+	    linklib=$newlib
+	  fi # test -n $old_archive_from_expsyms_cmds
+
+	  if test $linkmode = prog || test "$mode" != relink; then
+	    add_shlibpath=
+	    add_dir=
+	    add=
+	    lib_linked=yes
+	    case $hardcode_action in
+	    immediate | unsupported)
+	      if test "$hardcode_direct" = no; then
+		add="$dir/$linklib"
+	      elif test "$hardcode_minus_L" = no; then
+		case $host in
+		*-*-sunos*) add_shlibpath="$dir" ;;
+		esac
+		add_dir="-L$dir"
+		add="-l$name"
+	      elif test "$hardcode_shlibpath_var" = no; then
+		add_shlibpath="$dir"
+		add="-l$name"
+	      else
+		lib_linked=no
+	      fi
+	      ;;
+	    relink)
+	      if test "$hardcode_direct" = yes; then
+		add="$dir/$linklib"
+	      elif test "$hardcode_minus_L" = yes; then
+		add_dir="-L$dir"
+		# Try looking first in the location we're being installed to.
+		if test -n "$inst_prefix_dir"; then
+		  case "$libdir" in
+		  [\/]*)
+		    add_dir="-L$inst_prefix_dir$libdir $add_dir"
+		    ;;
+		  esac
+		fi
+		add="-l$name"
+	      elif test "$hardcode_shlibpath_var" = yes; then
+		add_shlibpath="$dir"
+		add="-l$name"
+	      else
+		lib_linked=no
+	      fi
+	      ;;
+	    *) lib_linked=no ;;
+	    esac
+
+	    if test "$lib_linked" != yes; then
+	      $echo "$modename: configuration error: unsupported hardcode properties"
+	      exit 1
+	    fi
+
+	    if test -n "$add_shlibpath"; then
+	      case :$compile_shlibpath: in
+	      *":$add_shlibpath:"*) ;;
+	      *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
+	      esac
+	    fi
+	    if test $linkmode = prog; then
+	      test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
+	      test -n "$add" && compile_deplibs="$add $compile_deplibs"
+	    else
+	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
+	      test -n "$add" && deplibs="$add $deplibs"
+	      if test "$hardcode_direct" != yes && \
+		 test "$hardcode_minus_L" != yes && \
+		 test "$hardcode_shlibpath_var" = yes; then
+		case :$finalize_shlibpath: in
+		*":$libdir:"*) ;;
+		*) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
+		esac
+	      fi
+	    fi
+	  fi
+
+	  if test $linkmode = prog || test "$mode" = relink; then
+	    add_shlibpath=
+	    add_dir=
+	    add=
+	    # Finalize command for both is simple: just hardcode it.
+	    if test "$hardcode_direct" = yes; then
+	      add="$libdir/$linklib"
+	    elif test "$hardcode_minus_L" = yes; then
+	      add_dir="-L$libdir"
+	      add="-l$name"
+	    elif test "$hardcode_shlibpath_var" = yes; then
+	      case :$finalize_shlibpath: in
+	      *":$libdir:"*) ;;
+	      *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
+	      esac
+	      add="-l$name"
+	    else
+	      # We cannot seem to hardcode it, guess we'll fake it.
+	      add_dir="-L$libdir"
+	      # Try looking first in the location we're being installed to.
+	      if test -n "$inst_prefix_dir"; then
+		case "$libdir" in
+		[\/]*)
+		  add_dir="-L$inst_prefix_dir$libdir $add_dir"
+		  ;;
+		esac
+	      fi
+	      add="-l$name"
+	    fi
+
+	    if test $linkmode = prog; then
+	      test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
+	      test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
+	    else
+	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
+	      test -n "$add" && deplibs="$add $deplibs"
+	    fi
+	  fi
+	elif test $linkmode = prog; then
+	  if test "$alldeplibs" = yes &&
+	     { test "$deplibs_check_method" = pass_all ||
+	       { test "$build_libtool_libs" = yes &&
+		 test -n "$library_names"; }; }; then
+	    # We only need to search for static libraries
+	    continue
+	  fi
+
+	  # Try to link the static library
+	  # Here we assume that one of hardcode_direct or hardcode_minus_L
+	  # is not unsupported.  This is valid on all known static and
+	  # shared platforms.
+	  if test "$hardcode_direct" != unsupported; then
+	    test -n "$old_library" && linklib="$old_library"
+	    compile_deplibs="$dir/$linklib $compile_deplibs"
+	    finalize_deplibs="$dir/$linklib $finalize_deplibs"
+	  else
+	    compile_deplibs="-l$name -L$dir $compile_deplibs"
+	    finalize_deplibs="-l$name -L$dir $finalize_deplibs"
+	  fi
+	elif test "$build_libtool_libs" = yes; then
+	  # Not a shared library
+	  if test "$deplibs_check_method" != pass_all; then
+	    # We're trying link a shared library against a static one
+	    # but the system doesn't support it.
+
+	    # Just print a warning and add the library to dependency_libs so
+	    # that the program can be linked against the static library.
+	    echo
+	    echo "*** Warning: This system can not link to static lib archive $lib."
+	    echo "*** I have the capability to make that library automatically link in when"
+	    echo "*** you link to this library.  But I can only do this if you have a"
+	    echo "*** shared version of the library, which you do not appear to have."
+	    if test "$module" = yes; then
+	      echo "*** But as you try to build a module library, libtool will still create "
+	      echo "*** a static module, that should work as long as the dlopening application"
+	      echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
+	      if test -z "$global_symbol_pipe"; then
+		echo
+		echo "*** However, this would only work if libtool was able to extract symbol"
+		echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+		echo "*** not find such a program.  So, this module is probably useless."
+		echo "*** \`nm' from GNU binutils and a full rebuild may help."
+	      fi
+	      if test "$build_old_libs" = no; then
+		build_libtool_libs=module
+		build_old_libs=yes
+	      else
+		build_libtool_libs=no
+	      fi
+	    fi
+	  else
+	    convenience="$convenience $dir/$old_library"
+	    old_convenience="$old_convenience $dir/$old_library"
+	    deplibs="$dir/$old_library $deplibs"
+	    link_static=yes
+	  fi
+	fi # link shared/static library?
+
+	if test $linkmode = lib; then
+	  if test -n "$dependency_libs" &&
+	     { test $hardcode_into_libs != yes || test $build_old_libs = yes ||
+	       test $link_static = yes; }; then
+	    # Extract -R from dependency_libs
+	    temp_deplibs=
+	    for libdir in $dependency_libs; do
+	      case $libdir in
+	      -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'`
+		   case " $xrpath " in
+		   *" $temp_xrpath "*) ;;
+		   *) xrpath="$xrpath $temp_xrpath";;
+		   esac;;
+	      *) temp_deplibs="$temp_deplibs $libdir";;
+	      esac
+	    done
+	    dependency_libs="$temp_deplibs"
+	  fi
+
+	  newlib_search_path="$newlib_search_path $absdir"
+	  # Link against this library
+	  test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
+	  # ... and its dependency_libs
+	  tmp_libs=
+	  for deplib in $dependency_libs; do
+	    newdependency_libs="$deplib $newdependency_libs"
+	    if test "X$duplicate_deps" = "Xyes" ; then
+	      case "$tmp_libs " in
+	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+	      esac
+	    fi
+	    tmp_libs="$tmp_libs $deplib"
+	  done
+
+	  if test $link_all_deplibs != no; then
+	    # Add the search paths of all dependency libraries
+	    for deplib in $dependency_libs; do
+	      case $deplib in
+	      -L*) path="$deplib" ;;
+	      *.la)
+		dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'`
+		test "X$dir" = "X$deplib" && dir="."
+		# We need an absolute path.
+		case $dir in
+		[\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
+		*)
+		  absdir=`cd "$dir" && pwd`
+		  if test -z "$absdir"; then
+		    $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
+		    absdir="$dir"
+		  fi
+		  ;;
+		esac
+		if grep "^installed=no" $deplib > /dev/null; then
+		  path="-L$absdir/$objdir"
+		else
+		  eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+		  if test -z "$libdir"; then
+		    $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
+		    exit 1
+		  fi
+		  if test "$absdir" != "$libdir"; then
+		    $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
+		  fi
+		  path="-L$absdir"
+		fi
+		;;
+	      *) continue ;;
+	      esac
+	      case " $deplibs " in
+	      *" $path "*) ;;
+	      *) deplibs="$deplibs $path" ;;
+	      esac
+	    done
+	  fi # link_all_deplibs != no
+	fi # linkmode = lib
+      done # for deplib in $libs
+      if test $pass = dlpreopen; then
+	# Link the dlpreopened libraries before other libraries
+	for deplib in $save_deplibs; do
+	  deplibs="$deplib $deplibs"
+	done
+      fi
+      if test $pass != dlopen; then
+	test $pass != scan && dependency_libs="$newdependency_libs"
+	if test $pass != conv; then
+	  # Make sure lib_search_path contains only unique directories.
+	  lib_search_path=
+	  for dir in $newlib_search_path; do
+	    case "$lib_search_path " in
+	    *" $dir "*) ;;
+	    *) lib_search_path="$lib_search_path $dir" ;;
+	    esac
+	  done
+	  newlib_search_path=
+	fi
+
+	if test "$linkmode,$pass" != "prog,link"; then
+	  vars="deplibs"
+	else
+	  vars="compile_deplibs finalize_deplibs"
+	fi
+	for var in $vars dependency_libs; do
+	  # Add libraries to $var in reverse order
+	  eval tmp_libs=\"\$$var\"
+	  new_libs=
+	  for deplib in $tmp_libs; do
+	    case $deplib in
+	    -L*) new_libs="$deplib $new_libs" ;;
+	    *)
+	      case " $specialdeplibs " in
+	      *" $deplib "*) new_libs="$deplib $new_libs" ;;
+	      *)
+		case " $new_libs " in
+		*" $deplib "*) ;;
+		*) new_libs="$deplib $new_libs" ;;
+		esac
+		;;
+	      esac
+	      ;;
+	    esac
+	  done
+	  tmp_libs=
+	  for deplib in $new_libs; do
+	    case $deplib in
+	    -L*)
+	      case " $tmp_libs " in
+	      *" $deplib "*) ;;
+	      *) tmp_libs="$tmp_libs $deplib" ;;
+	      esac
+	      ;;
+	    *) tmp_libs="$tmp_libs $deplib" ;;
+	    esac
+	  done
+	  eval $var=\"$tmp_libs\"
+	done # for var
+      fi
+      if test "$pass" = "conv" &&
+       { test "$linkmode" = "lib" || test "$linkmode" = "prog"; }; then
+	libs="$deplibs" # reset libs
+	deplibs=
+      fi
+    done # for pass
+    if test $linkmode = prog; then
+      dlfiles="$newdlfiles"
+      dlprefiles="$newdlprefiles"
+    fi
+
+    case $linkmode in
+    oldlib)
+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+	$echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$rpath"; then
+	$echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$xrpath"; then
+	$echo "$modename: warning: \`-R' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$vinfo"; then
+	$echo "$modename: warning: \`-version-info' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$release"; then
+	$echo "$modename: warning: \`-release' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+	$echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2
+      fi
+
+      # Now set the variables for building old libraries.
+      build_libtool_libs=no
+      oldlibs="$output"
+      objs="$objs$old_deplibs"
+      ;;
+
+    lib)
+      # Make sure we only generate libraries of the form `libNAME.la'.
+      case $outputname in
+      lib*)
+	name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
+	eval libname=\"$libname_spec\"
+	;;
+      *)
+	if test "$module" = no; then
+	  $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
+	  $echo "$help" 1>&2
+	  exit 1
+	fi
+	if test "$need_lib_prefix" != no; then
+	  # Add the "lib" prefix for modules if required
+	  name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
+	  eval libname=\"$libname_spec\"
+	else
+	  libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
+	fi
+	;;
+      esac
+
+      if test -n "$objs"; then
+	if test "$deplibs_check_method" != pass_all; then
+	  $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1
+	  exit 1
+	else
+	  echo
+	  echo "*** Warning: Linking the shared library $output against the non-libtool"
+	  echo "*** objects $objs is not portable!"
+	  libobjs="$libobjs $objs"
+	fi
+      fi
+
+      if test "$dlself" != no; then
+	$echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2
+      fi
+
+      set dummy $rpath
+      if test $# -gt 2; then
+	$echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
+      fi
+      install_libdir="$2"
+
+      oldlibs=
+      if test -z "$rpath"; then
+	if test "$build_libtool_libs" = yes; then
+	  # Building a libtool convenience library.
+	  libext=al
+	  oldlibs="$output_objdir/$libname.$libext $oldlibs"
+	  build_libtool_libs=convenience
+	  build_old_libs=yes
+	fi
+
+	if test -n "$vinfo"; then
+	  $echo "$modename: warning: \`-version-info' is ignored for convenience libraries" 1>&2
+	fi
+
+	if test -n "$release"; then
+	  $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2
+	fi
+      else
+
+	# Parse the version information argument.
+	save_ifs="$IFS"; IFS=':'
+	set dummy $vinfo 0 0 0
+	IFS="$save_ifs"
+
+	if test -n "$8"; then
+	  $echo "$modename: too many parameters to \`-version-info'" 1>&2
+	  $echo "$help" 1>&2
+	  exit 1
+	fi
+
+	current="$2"
+	revision="$3"
+	age="$4"
+
+	# Check that each of the things are valid numbers.
+	case $current in
+	0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
+	*)
+	  $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2
+	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+	  exit 1
+	  ;;
+	esac
+
+	case $revision in
+	0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
+	*)
+	  $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2
+	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+	  exit 1
+	  ;;
+	esac
+
+	case $age in
+	0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
+	*)
+	  $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2
+	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+	  exit 1
+	  ;;
+	esac
+
+	if test $age -gt $current; then
+	  $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
+	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+	  exit 1
+	fi
+
+	# Calculate the version variables.
+	major=
+	versuffix=
+	verstring=
+	case $version_type in
+	none) ;;
+
+	darwin)
+	  # Like Linux, but with the current version available in
+	  # verstring for coding it into the library header
+	  major=.`expr $current - $age`
+	  versuffix="$major.$age.$revision"
+	  # Darwin ld doesn't like 0 for these options...
+	  minor_current=`expr $current + 1`
+	  verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+	  ;;
+
+	freebsd-aout)
+	  major=".$current"
+	  versuffix=".$current.$revision";
+	  ;;
+
+	freebsd-elf)
+	  major=".$current"
+	  versuffix=".$current";
+	  ;;
+
+	irix | nonstopux)
+	  major=`expr $current - $age + 1`
+
+	  case $version_type in
+	    nonstopux) verstring_prefix=nonstopux ;;
+	    *)         verstring_prefix=sgi ;;
+	  esac
+	  verstring="$verstring_prefix$major.$revision"
+
+	  # Add in all the interfaces that we are compatible with.
+	  loop=$revision
+	  while test $loop != 0; do
+	    iface=`expr $revision - $loop`
+	    loop=`expr $loop - 1`
+	    verstring="$verstring_prefix$major.$iface:$verstring"
+	  done
+
+	  # Before this point, $major must not contain `.'.
+	  major=.$major
+	  versuffix="$major.$revision"
+	  ;;
+
+	linux)
+	  major=.`expr $current - $age`
+	  versuffix="$major.$age.$revision"
+	  ;;
+
+	osf)
+	  major=.`expr $current - $age`
+	  versuffix=".$current.$age.$revision"
+	  verstring="$current.$age.$revision"
+
+	  # Add in all the interfaces that we are compatible with.
+	  loop=$age
+	  while test $loop != 0; do
+	    iface=`expr $current - $loop`
+	    loop=`expr $loop - 1`
+	    verstring="$verstring:${iface}.0"
+	  done
+
+	  # Make executables depend on our current version.
+	  verstring="$verstring:${current}.0"
+	  ;;
+
+	sunos)
+	  major=".$current"
+	  versuffix=".$current.$revision"
+	  ;;
+
+	windows)
+	  # Use '-' rather than '.', since we only want one
+	  # extension on DOS 8.3 filesystems.
+	  major=`expr $current - $age`
+	  versuffix="-$major"
+	  ;;
+
+	*)
+	  $echo "$modename: unknown library version type \`$version_type'" 1>&2
+	  echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
+	  exit 1
+	  ;;
+	esac
+
+	# Clear the version info if we defaulted, and they specified a release.
+	if test -z "$vinfo" && test -n "$release"; then
+	  major=
+	  verstring="0.0"
+	  case $version_type in
+	  darwin)
+	    # we can't check for "0.0" in archive_cmds due to quoting
+	    # problems, so we reset it completely
+	    verstring=""
+	    ;;
+	  *)
+	    verstring="0.0"
+	    ;;
+	  esac
+	  if test "$need_version" = no; then
+	    versuffix=
+	  else
+	    versuffix=".0.0"
+	  fi
+	fi
+
+	# Remove version info from name if versioning should be avoided
+	if test "$avoid_version" = yes && test "$need_version" = no; then
+	  major=
+	  versuffix=
+	  verstring=""
+	fi
+
+	# Check to see if the archive will have undefined symbols.
+	if test "$allow_undefined" = yes; then
+	  if test "$allow_undefined_flag" = unsupported; then
+	    $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2
+	    build_libtool_libs=no
+	    build_old_libs=yes
+	  fi
+	else
+	  # Don't allow undefined symbols.
+	  allow_undefined_flag="$no_undefined_flag"
+	fi
+      fi
+
+      if test "$mode" != relink; then
+	# Remove our outputs.
+	$show "${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*"
+	$run ${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*
+      fi
+
+      # Now set the variables for building old libraries.
+      if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
+	oldlibs="$oldlibs $output_objdir/$libname.$libext"
+
+	# Transform .lo files to .o files.
+	oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
+      fi
+
+      # Eliminate all temporary directories.
+      for path in $notinst_path; do
+	lib_search_path=`echo "$lib_search_path " | ${SED} -e 's% $path % %g'`
+	deplibs=`echo "$deplibs " | ${SED} -e 's% -L$path % %g'`
+	dependency_libs=`echo "$dependency_libs " | ${SED} -e 's% -L$path % %g'`
+      done
+
+      if test -n "$xrpath"; then
+	# If the user specified any rpath flags, then add them.
+	temp_xrpath=
+	for libdir in $xrpath; do
+	  temp_xrpath="$temp_xrpath -R$libdir"
+	  case "$finalize_rpath " in
+	  *" $libdir "*) ;;
+	  *) finalize_rpath="$finalize_rpath $libdir" ;;
+	  esac
+	done
+	if test $hardcode_into_libs != yes || test $build_old_libs = yes; then
+	  dependency_libs="$temp_xrpath $dependency_libs"
+	fi
+      fi
+
+      # Make sure dlfiles contains only unique files that won't be dlpreopened
+      old_dlfiles="$dlfiles"
+      dlfiles=
+      for lib in $old_dlfiles; do
+	case " $dlprefiles $dlfiles " in
+	*" $lib "*) ;;
+	*) dlfiles="$dlfiles $lib" ;;
+	esac
+      done
+
+      # Make sure dlprefiles contains only unique files
+      old_dlprefiles="$dlprefiles"
+      dlprefiles=
+      for lib in $old_dlprefiles; do
+	case "$dlprefiles " in
+	*" $lib "*) ;;
+	*) dlprefiles="$dlprefiles $lib" ;;
+	esac
+      done
+
+      if test "$build_libtool_libs" = yes; then
+	if test -n "$rpath"; then
+	  case $host in
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*)
+	    # these systems don't actually have a c library (as such)!
+	    ;;
+	  *-*-rhapsody* | *-*-darwin1.[012])
+	    # Rhapsody C library is in the System framework
+	    deplibs="$deplibs -framework System"
+	    ;;
+	  *-*-netbsd*)
+	    # Don't link with libc until the a.out ld.so is fixed.
+	    ;;
+	  *-*-openbsd* | *-*-freebsd*)
+	    # Do not include libc due to us having libc/libc_r.
+	    ;;
+	  *)
+	    # Add libc to deplibs on all other systems if necessary.
+	    if test $build_libtool_need_lc = "yes"; then
+	      deplibs="$deplibs -lc"
+	    fi
+	    ;;
+	  esac
+	fi
+
+	# Transform deplibs into only deplibs that can be linked in shared.
+	name_save=$name
+	libname_save=$libname
+	release_save=$release
+	versuffix_save=$versuffix
+	major_save=$major
+	# I'm not sure if I'm treating the release correctly.  I think
+	# release should show up in the -l (ie -lgmp5) so we don't want to
+	# add it in twice.  Is that correct?
+	release=""
+	versuffix=""
+	major=""
+	newdeplibs=
+	droppeddeps=no
+	case $deplibs_check_method in
+	pass_all)
+	  # Don't check for shared/static.  Everything works.
+	  # This might be a little naive.  We might want to check
+	  # whether the library exists or not.  But this is on
+	  # osf3 & osf4 and I'm not really sure... Just
+	  # implementing what was already the behaviour.
+	  newdeplibs=$deplibs
+	  ;;
+	test_compile)
+	  # This code stresses the "libraries are programs" paradigm to its
+	  # limits. Maybe even breaks it.  We compile a program, linking it
+	  # against the deplibs as a proxy for the library.  Then we can check
+	  # whether they linked in statically or dynamically with ldd.
+	  $rm conftest.c
+	  cat > conftest.c <<EOF
+	  int main() { return 0; }
+EOF
+	  $rm conftest
+	  $CC -o conftest conftest.c $deplibs
+	  if test $? -eq 0 ; then
+	    ldd_output=`ldd conftest`
+	    for i in $deplibs; do
+	      name="`expr $i : '-l\(.*\)'`"
+	      # If $name is empty we are operating on a -L argument.
+	      if test -n "$name" && test "$name" != "0"; then
+		libname=`eval \\$echo \"$libname_spec\"`
+		deplib_matches=`eval \\$echo \"$library_names_spec\"`
+		set dummy $deplib_matches
+		deplib_match=$2
+		if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+		  newdeplibs="$newdeplibs $i"
+		else
+		  droppeddeps=yes
+		  echo
+		  echo "*** Warning: dynamic linker does not accept needed library $i."
+		  echo "*** I have the capability to make that library automatically link in when"
+		  echo "*** you link to this library.  But I can only do this if you have a"
+		  echo "*** shared version of the library, which I believe you do not have"
+		  echo "*** because a test_compile did reveal that the linker did not use it for"
+		  echo "*** its dynamic dependency list that programs get resolved with at runtime."
+		fi
+	      else
+		newdeplibs="$newdeplibs $i"
+	      fi
+	    done
+	  else
+	    # Error occured in the first compile.  Let's try to salvage
+	    # the situation: Compile a separate program for each library.
+	    for i in $deplibs; do
+	      name="`expr $i : '-l\(.*\)'`"
+	     # If $name is empty we are operating on a -L argument.
+	      if test -n "$name" && test "$name" != "0"; then
+		$rm conftest
+		$CC -o conftest conftest.c $i
+		# Did it work?
+		if test $? -eq 0 ; then
+		  ldd_output=`ldd conftest`
+		  libname=`eval \\$echo \"$libname_spec\"`
+		  deplib_matches=`eval \\$echo \"$library_names_spec\"`
+		  set dummy $deplib_matches
+		  deplib_match=$2
+		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+		    newdeplibs="$newdeplibs $i"
+		  else
+		    droppeddeps=yes
+		    echo
+		    echo "*** Warning: dynamic linker does not accept needed library $i."
+		    echo "*** I have the capability to make that library automatically link in when"
+		    echo "*** you link to this library.  But I can only do this if you have a"
+		    echo "*** shared version of the library, which you do not appear to have"
+		    echo "*** because a test_compile did reveal that the linker did not use this one"
+		    echo "*** as a dynamic dependency that programs can get resolved with at runtime."
+		  fi
+		else
+		  droppeddeps=yes
+		  echo
+		  echo "*** Warning!  Library $i is needed by this library but I was not able to"
+		  echo "***  make it link in!  You will probably need to install it or some"
+		  echo "*** library that it depends on before this library will be fully"
+		  echo "*** functional.  Installing it before continuing would be even better."
+		fi
+	      else
+		newdeplibs="$newdeplibs $i"
+	      fi
+	    done
+	  fi
+	  ;;
+	file_magic*)
+	  set dummy $deplibs_check_method
+	  file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+	  for a_deplib in $deplibs; do
+	    name="`expr $a_deplib : '-l\(.*\)'`"
+	    # If $name is empty we are operating on a -L argument.
+	    if test -n "$name" && test "$name" != "0"; then
+	      libname=`eval \\$echo \"$libname_spec\"`
+	      for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+		    potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+		    for potent_lib in $potential_libs; do
+		      # Follow soft links.
+		      if ls -lLd "$potent_lib" 2>/dev/null \
+			 | grep " -> " >/dev/null; then
+			continue
+		      fi
+		      # The statement above tries to avoid entering an
+		      # endless loop below, in case of cyclic links.
+		      # We might still enter an endless loop, since a link
+		      # loop can be closed while we follow links,
+		      # but so what?
+		      potlib="$potent_lib"
+		      while test -h "$potlib" 2>/dev/null; do
+			potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
+			case $potliblink in
+			[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
+			*) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
+			esac
+		      done
+		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
+			 | ${SED} 10q \
+			 | egrep "$file_magic_regex" > /dev/null; then
+			newdeplibs="$newdeplibs $a_deplib"
+			a_deplib=""
+			break 2
+		      fi
+		    done
+	      done
+	      if test -n "$a_deplib" ; then
+		droppeddeps=yes
+		echo
+		echo "*** Warning: linker path does not have real file for library $a_deplib."
+		echo "*** I have the capability to make that library automatically link in when"
+		echo "*** you link to this library.  But I can only do this if you have a"
+		echo "*** shared version of the library, which you do not appear to have"
+		echo "*** because I did check the linker path looking for a file starting"
+		if test -z "$potlib" ; then
+		  echo "*** with $libname but no candidates were found. (...for file magic test)"
+		else
+		  echo "*** with $libname and none of the candidates passed a file format test"
+		  echo "*** using a file magic. Last file checked: $potlib"
+		fi
+	      fi
+	    else
+	      # Add a -L argument.
+	      newdeplibs="$newdeplibs $a_deplib"
+	    fi
+	  done # Gone through all deplibs.
+	  ;;
+	match_pattern*)
+	  set dummy $deplibs_check_method
+	  match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+	  for a_deplib in $deplibs; do
+	    name="`expr $a_deplib : '-l\(.*\)'`"
+	    # If $name is empty we are operating on a -L argument.
+	    if test -n "$name" && test "$name" != "0"; then
+	      libname=`eval \\$echo \"$libname_spec\"`
+	      for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+		potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+		for potent_lib in $potential_libs; do
+		  potlib="$potent_lib" # see symlink-check below in file_magic test
+		  if eval echo \"$potent_lib\" 2>/dev/null \
+		      | ${SED} 10q \
+		      | egrep "$match_pattern_regex" > /dev/null; then
+		    newdeplibs="$newdeplibs $a_deplib"
+		    a_deplib=""
+		    break 2
+		  fi
+		done
+	      done
+	      if test -n "$a_deplib" ; then
+		droppeddeps=yes
+		echo
+		echo "*** Warning: linker path does not have real file for library $a_deplib."
+		echo "*** I have the capability to make that library automatically link in when"
+		echo "*** you link to this library.  But I can only do this if you have a"
+		echo "*** shared version of the library, which you do not appear to have"
+		echo "*** because I did check the linker path looking for a file starting"
+		if test -z "$potlib" ; then
+		  echo "*** with $libname but no candidates were found. (...for regex pattern test)"
+		else
+		  echo "*** with $libname and none of the candidates passed a file format test"
+		  echo "*** using a regex pattern. Last file checked: $potlib"
+		fi
+	      fi
+	    else
+	      # Add a -L argument.
+	      newdeplibs="$newdeplibs $a_deplib"
+	    fi
+	  done # Gone through all deplibs.
+	  ;;
+	none | unknown | *)
+	  newdeplibs=""
+	  if $echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
+	       -e 's/ -[LR][^ ]*//g' -e 's/[ 	]//g' |
+	     grep . >/dev/null; then
+	    echo
+	    if test "X$deplibs_check_method" = "Xnone"; then
+	      echo "*** Warning: inter-library dependencies are not supported in this platform."
+	    else
+	      echo "*** Warning: inter-library dependencies are not known to be supported."
+	    fi
+	    echo "*** All declared inter-library dependencies are being dropped."
+	    droppeddeps=yes
+	  fi
+	  ;;
+	esac
+	versuffix=$versuffix_save
+	major=$major_save
+	release=$release_save
+	libname=$libname_save
+	name=$name_save
+
+	case $host in
+	*-*-rhapsody* | *-*-darwin1.[012])
+	  # On Rhapsody replace the C library is the System framework
+	  newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'`
+	  ;;
+	esac
+
+	if test "$droppeddeps" = yes; then
+	  if test "$module" = yes; then
+	    echo
+	    echo "*** Warning: libtool could not satisfy all declared inter-library"
+	    echo "*** dependencies of module $libname.  Therefore, libtool will create"
+	    echo "*** a static module, that should work as long as the dlopening"
+	    echo "*** application is linked with the -dlopen flag."
+	    if test -z "$global_symbol_pipe"; then
+	      echo
+	      echo "*** However, this would only work if libtool was able to extract symbol"
+	      echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+	      echo "*** not find such a program.  So, this module is probably useless."
+	      echo "*** \`nm' from GNU binutils and a full rebuild may help."
+	    fi
+	    if test "$build_old_libs" = no; then
+	      oldlibs="$output_objdir/$libname.$libext"
+	      build_libtool_libs=module
+	      build_old_libs=yes
+	    else
+	      build_libtool_libs=no
+	    fi
+	  else
+	    echo "*** The inter-library dependencies that have been dropped here will be"
+	    echo "*** automatically added whenever a program is linked with this library"
+	    echo "*** or is declared to -dlopen it."
+
+	    if test $allow_undefined = no; then
+	      echo
+	      echo "*** Since this library must not contain undefined symbols,"
+	      echo "*** because either the platform does not support them or"
+	      echo "*** it was explicitly requested with -no-undefined,"
+	      echo "*** libtool will only create a static version of it."
+	      if test "$build_old_libs" = no; then
+		oldlibs="$output_objdir/$libname.$libext"
+		build_libtool_libs=module
+		build_old_libs=yes
+	      else
+		build_libtool_libs=no
+	      fi
+	    fi
+	  fi
+	fi
+	# Done checking deplibs!
+	deplibs=$newdeplibs
+      fi
+
+      # All the library-specific variables (install_libdir is set above).
+      library_names=
+      old_library=
+      dlname=
+
+      # Test again, we may have decided not to build it any more
+      if test "$build_libtool_libs" = yes; then
+	if test $hardcode_into_libs = yes; then
+	  # Hardcode the library paths
+	  hardcode_libdirs=
+	  dep_rpath=
+	  rpath="$finalize_rpath"
+	  test "$mode" != relink && rpath="$compile_rpath$rpath"
+	  for libdir in $rpath; do
+	    if test -n "$hardcode_libdir_flag_spec"; then
+	      if test -n "$hardcode_libdir_separator"; then
+		if test -z "$hardcode_libdirs"; then
+		  hardcode_libdirs="$libdir"
+		else
+		  # Just accumulate the unique libdirs.
+		  case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+		  *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		    ;;
+		  *)
+		    hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+		    ;;
+		  esac
+		fi
+	      else
+		eval flag=\"$hardcode_libdir_flag_spec\"
+		dep_rpath="$dep_rpath $flag"
+	      fi
+	    elif test -n "$runpath_var"; then
+	      case "$perm_rpath " in
+	      *" $libdir "*) ;;
+	      *) perm_rpath="$perm_rpath $libdir" ;;
+	      esac
+	    fi
+	  done
+	  # Substitute the hardcoded libdirs into the rpath.
+	  if test -n "$hardcode_libdir_separator" &&
+	     test -n "$hardcode_libdirs"; then
+	    libdir="$hardcode_libdirs"
+	    eval dep_rpath=\"$hardcode_libdir_flag_spec\"
+	  fi
+	  if test -n "$runpath_var" && test -n "$perm_rpath"; then
+	    # We should set the runpath_var.
+	    rpath=
+	    for dir in $perm_rpath; do
+	      rpath="$rpath$dir:"
+	    done
+	    eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
+	  fi
+	  test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
+	fi
+
+	shlibpath="$finalize_shlibpath"
+	test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
+	if test -n "$shlibpath"; then
+	  eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
+	fi
+
+	# Get the real and link names of the library.
+	eval library_names=\"$library_names_spec\"
+	set dummy $library_names
+	realname="$2"
+	shift; shift
+
+	if test -n "$soname_spec"; then
+	  eval soname=\"$soname_spec\"
+	else
+	  soname="$realname"
+	fi
+	test -z "$dlname" && dlname=$soname
+
+	lib="$output_objdir/$realname"
+	for link
+	do
+	  linknames="$linknames $link"
+	done
+
+	# Ensure that we have .o objects for linkers which dislike .lo
+	# (e.g. aix) in case we are running --disable-static
+	for obj in $libobjs; do
+	  xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
+	  if test "X$xdir" = "X$obj"; then
+	    xdir="."
+	  else
+	    xdir="$xdir"
+	  fi
+	  baseobj=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
+	  oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"`
+	  if test ! -f $xdir/$oldobj; then
+	    $show "(cd $xdir && ${LN_S} $baseobj $oldobj)"
+	    $run eval '(cd $xdir && ${LN_S} $baseobj $oldobj)' || exit $?
+	  fi
+	done
+
+	# Use standard objects if they are pic
+	test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+
+	# Prepare the list of exported symbols
+	if test -z "$export_symbols"; then
+	  if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
+	    $show "generating symbol list for \`$libname.la'"
+	    export_symbols="$output_objdir/$libname.exp"
+	    $run $rm $export_symbols
+	    eval cmds=\"$export_symbols_cmds\"
+	    save_ifs="$IFS"; IFS='~'
+	    for cmd in $cmds; do
+	      IFS="$save_ifs"
+	      $show "$cmd"
+	      $run eval "$cmd" || exit $?
+	    done
+	    IFS="$save_ifs"
+	    if test -n "$export_symbols_regex"; then
+	      $show "egrep -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""
+	      $run eval 'egrep -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+	      $show "$mv \"${export_symbols}T\" \"$export_symbols\""
+	      $run eval '$mv "${export_symbols}T" "$export_symbols"'
+	    fi
+	  fi
+	fi
+
+	if test -n "$export_symbols" && test -n "$include_expsyms"; then
+	  $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"'
+	fi
+
+	if test -n "$convenience"; then
+	  if test -n "$whole_archive_flag_spec"; then
+	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+	  else
+	    gentop="$output_objdir/${outputname}x"
+	    $show "${rm}r $gentop"
+	    $run ${rm}r "$gentop"
+	    $show "mkdir $gentop"
+	    $run mkdir "$gentop"
+	    status=$?
+	    if test $status -ne 0 && test ! -d "$gentop"; then
+	      exit $status
+	    fi
+	    generated="$generated $gentop"
+
+	    for xlib in $convenience; do
+	      # Extract the objects.
+	      case $xlib in
+	      [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
+	      *) xabs=`pwd`"/$xlib" ;;
+	      esac
+	      xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
+	      xdir="$gentop/$xlib"
+
+	      $show "${rm}r $xdir"
+	      $run ${rm}r "$xdir"
+	      $show "mkdir $xdir"
+	      $run mkdir "$xdir"
+	      status=$?
+	      if test $status -ne 0 && test ! -d "$xdir"; then
+		exit $status
+	      fi
+	      $show "(cd $xdir && $AR x $xabs)"
+	      $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
+
+	      libobjs="$libobjs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP`
+	    done
+	  fi
+	fi
+
+	if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
+	  eval flag=\"$thread_safe_flag_spec\"
+	  linker_flags="$linker_flags $flag"
+	fi
+
+	# Make a backup of the uninstalled library when relinking
+	if test "$mode" = relink; then
+	  $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $?
+	fi
+
+	# Do each of the archive commands.
+	if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+	  eval cmds=\"$archive_expsym_cmds\"
+	else
+	  save_deplibs="$deplibs"
+	  for conv in $convenience; do
+	    tmp_deplibs=
+	    for test_deplib in $deplibs; do
+	      if test "$test_deplib" != "$conv"; then
+		tmp_deplibs="$tmp_deplibs $test_deplib"
+	      fi
+	    done
+	    deplibs="$tmp_deplibs"
+	  done
+	  eval cmds=\"$archive_cmds\"
+	  deplibs="$save_deplibs"
+	fi
+	save_ifs="$IFS"; IFS='~'
+	for cmd in $cmds; do
+	  IFS="$save_ifs"
+	  $show "$cmd"
+	  $run eval "$cmd" || exit $?
+	done
+	IFS="$save_ifs"
+
+	# Restore the uninstalled library and exit
+	if test "$mode" = relink; then
+	  $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $?
+	  exit 0
+	fi
+
+	# Create links to the real library.
+	for linkname in $linknames; do
+	  if test "$realname" != "$linkname"; then
+	    $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)"
+	    $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $?
+	  fi
+	done
+
+	# If -module or -export-dynamic was specified, set the dlname.
+	if test "$module" = yes || test "$export_dynamic" = yes; then
+	  # On all known operating systems, these are identical.
+	  dlname="$soname"
+	fi
+      fi
+      ;;
+
+    obj)
+      if test -n "$deplibs"; then
+	$echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2
+      fi
+
+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+	$echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2
+      fi
+
+      if test -n "$rpath"; then
+	$echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2
+      fi
+
+      if test -n "$xrpath"; then
+	$echo "$modename: warning: \`-R' is ignored for objects" 1>&2
+      fi
+
+      if test -n "$vinfo"; then
+	$echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2
+      fi
+
+      if test -n "$release"; then
+	$echo "$modename: warning: \`-release' is ignored for objects" 1>&2
+      fi
+
+      case $output in
+      *.lo)
+	if test -n "$objs$old_deplibs"; then
+	  $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
+	  exit 1
+	fi
+	libobj="$output"
+	obj=`$echo "X$output" | $Xsed -e "$lo2o"`
+	;;
+      *)
+	libobj=
+	obj="$output"
+	;;
+      esac
+
+      # Delete the old objects.
+      $run $rm $obj $libobj
+
+      # Objects from convenience libraries.  This assumes
+      # single-version convenience libraries.  Whenever we create
+      # different ones for PIC/non-PIC, this we'll have to duplicate
+      # the extraction.
+      reload_conv_objs=
+      gentop=
+      # reload_cmds runs $LD directly, so let us get rid of
+      # -Wl from whole_archive_flag_spec
+      wl=
+
+      if test -n "$convenience"; then
+	if test -n "$whole_archive_flag_spec"; then
+	  eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
+	else
+	  gentop="$output_objdir/${obj}x"
+	  $show "${rm}r $gentop"
+	  $run ${rm}r "$gentop"
+	  $show "mkdir $gentop"
+	  $run mkdir "$gentop"
+	  status=$?
+	  if test $status -ne 0 && test ! -d "$gentop"; then
+	    exit $status
+	  fi
+	  generated="$generated $gentop"
+
+	  for xlib in $convenience; do
+	    # Extract the objects.
+	    case $xlib in
+	    [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
+	    *) xabs=`pwd`"/$xlib" ;;
+	    esac
+	    xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
+	    xdir="$gentop/$xlib"
+
+	    $show "${rm}r $xdir"
+	    $run ${rm}r "$xdir"
+	    $show "mkdir $xdir"
+	    $run mkdir "$xdir"
+	    status=$?
+	    if test $status -ne 0 && test ! -d "$xdir"; then
+	      exit $status
+	    fi
+	    $show "(cd $xdir && $AR x $xabs)"
+	    $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
+
+	    reload_conv_objs="$reload_objs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP`
+	  done
+	fi
+      fi
+
+      # Create the old-style object.
+      reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
+
+      output="$obj"
+      eval cmds=\"$reload_cmds\"
+      save_ifs="$IFS"; IFS='~'
+      for cmd in $cmds; do
+	IFS="$save_ifs"
+	$show "$cmd"
+	$run eval "$cmd" || exit $?
+      done
+      IFS="$save_ifs"
+
+      # Exit if we aren't doing a library object file.
+      if test -z "$libobj"; then
+	if test -n "$gentop"; then
+	  $show "${rm}r $gentop"
+	  $run ${rm}r $gentop
+	fi
+
+	exit 0
+      fi
+
+      if test "$build_libtool_libs" != yes; then
+	if test -n "$gentop"; then
+	  $show "${rm}r $gentop"
+	  $run ${rm}r $gentop
+	fi
+
+	# Create an invalid libtool object if no PIC, so that we don't
+	# accidentally link it into a program.
+	$show "echo timestamp > $libobj"
+	$run eval "echo timestamp > $libobj" || exit $?
+	exit 0
+      fi
+
+      if test -n "$pic_flag" || test "$pic_mode" != default; then
+	# Only do commands if we really have different PIC objects.
+	reload_objs="$libobjs $reload_conv_objs"
+	output="$libobj"
+	eval cmds=\"$reload_cmds\"
+	save_ifs="$IFS"; IFS='~'
+	for cmd in $cmds; do
+	  IFS="$save_ifs"
+	  $show "$cmd"
+	  $run eval "$cmd" || exit $?
+	done
+	IFS="$save_ifs"
+      else
+	# Just create a symlink.
+	$show $rm $libobj
+	$run $rm $libobj
+	xdir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'`
+	if test "X$xdir" = "X$libobj"; then
+	  xdir="."
+	else
+	  xdir="$xdir"
+	fi
+	baseobj=`$echo "X$libobj" | $Xsed -e 's%^.*/%%'`
+	oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"`
+	$show "(cd $xdir && $LN_S $oldobj $baseobj)"
+	$run eval '(cd $xdir && $LN_S $oldobj $baseobj)' || exit $?
+      fi
+
+      if test -n "$gentop"; then
+	$show "${rm}r $gentop"
+	$run ${rm}r $gentop
+      fi
+
+      exit 0
+      ;;
+
+    prog)
+      case $host in
+	*cygwin*) output=`echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;;
+      esac
+      if test -n "$vinfo"; then
+	$echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
+      fi
+
+      if test -n "$release"; then
+	$echo "$modename: warning: \`-release' is ignored for programs" 1>&2
+      fi
+
+      if test "$preload" = yes; then
+	if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown &&
+	   test "$dlopen_self_static" = unknown; then
+	  $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support."
+	fi
+      fi
+
+      case $host in
+      *-*-rhapsody* | *-*-darwin1.[012])
+	# On Rhapsody replace the C library is the System framework
+	compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
+	finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
+	case $host in
+	*darwin*)
+	  # Don't allow lazy linking, it breaks C++ global constructors
+	  compile_command="$compile_command ${wl}-bind_at_load"
+	  finalize_command="$finalize_command ${wl}-bind_at_load"
+	  ;;
+	esac
+	;;
+      esac
+
+      compile_command="$compile_command $compile_deplibs"
+      finalize_command="$finalize_command $finalize_deplibs"
+
+      if test -n "$rpath$xrpath"; then
+	# If the user specified any rpath flags, then add them.
+	for libdir in $rpath $xrpath; do
+	  # This is the magic to use -rpath.
+	  case "$finalize_rpath " in
+	  *" $libdir "*) ;;
+	  *) finalize_rpath="$finalize_rpath $libdir" ;;
+	  esac
+	done
+      fi
+
+      # Now hardcode the library paths
+      rpath=
+      hardcode_libdirs=
+      for libdir in $compile_rpath $finalize_rpath; do
+	if test -n "$hardcode_libdir_flag_spec"; then
+	  if test -n "$hardcode_libdir_separator"; then
+	    if test -z "$hardcode_libdirs"; then
+	      hardcode_libdirs="$libdir"
+	    else
+	      # Just accumulate the unique libdirs.
+	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		;;
+	      *)
+		hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+		;;
+	      esac
+	    fi
+	  else
+	    eval flag=\"$hardcode_libdir_flag_spec\"
+	    rpath="$rpath $flag"
+	  fi
+	elif test -n "$runpath_var"; then
+	  case "$perm_rpath " in
+	  *" $libdir "*) ;;
+	  *) perm_rpath="$perm_rpath $libdir" ;;
+	  esac
+	fi
+	case $host in
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+	  case :$dllsearchpath: in
+	  *":$libdir:"*) ;;
+	  *) dllsearchpath="$dllsearchpath:$libdir";;
+	  esac
+	  ;;
+	esac
+      done
+      # Substitute the hardcoded libdirs into the rpath.
+      if test -n "$hardcode_libdir_separator" &&
+	 test -n "$hardcode_libdirs"; then
+	libdir="$hardcode_libdirs"
+	eval rpath=\" $hardcode_libdir_flag_spec\"
+      fi
+      compile_rpath="$rpath"
+
+      rpath=
+      hardcode_libdirs=
+      for libdir in $finalize_rpath; do
+	if test -n "$hardcode_libdir_flag_spec"; then
+	  if test -n "$hardcode_libdir_separator"; then
+	    if test -z "$hardcode_libdirs"; then
+	      hardcode_libdirs="$libdir"
+	    else
+	      # Just accumulate the unique libdirs.
+	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		;;
+	      *)
+		hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+		;;
+	      esac
+	    fi
+	  else
+	    eval flag=\"$hardcode_libdir_flag_spec\"
+	    rpath="$rpath $flag"
+	  fi
+	elif test -n "$runpath_var"; then
+	  case "$finalize_perm_rpath " in
+	  *" $libdir "*) ;;
+	  *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
+	  esac
+	fi
+      done
+      # Substitute the hardcoded libdirs into the rpath.
+      if test -n "$hardcode_libdir_separator" &&
+	 test -n "$hardcode_libdirs"; then
+	libdir="$hardcode_libdirs"
+	eval rpath=\" $hardcode_libdir_flag_spec\"
+      fi
+      finalize_rpath="$rpath"
+
+      if test -n "$libobjs" && test "$build_old_libs" = yes; then
+	# Transform all the library objects into standard objects.
+	compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+	finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+      fi
+
+      dlsyms=
+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+	if test -n "$NM" && test -n "$global_symbol_pipe"; then
+	  dlsyms="${outputname}S.c"
+	else
+	  $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2
+	fi
+      fi
+
+      if test -n "$dlsyms"; then
+	case $dlsyms in
+	"") ;;
+	*.c)
+	  # Discover the nlist of each of the dlfiles.
+	  nlist="$output_objdir/${outputname}.nm"
+
+	  $show "$rm $nlist ${nlist}S ${nlist}T"
+	  $run $rm "$nlist" "${nlist}S" "${nlist}T"
+
+	  # Parse the name list into a source file.
+	  $show "creating $output_objdir/$dlsyms"
+
+	  test -z "$run" && $echo > "$output_objdir/$dlsyms" "\
+/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */
+/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */
+
+#ifdef __cplusplus
+extern \"C\" {
+#endif
+
+/* Prevent the only kind of declaration conflicts we can make. */
+#define lt_preloaded_symbols some_other_symbol
+
+/* External symbol declarations for the compiler. */\
+"
+
+	  if test "$dlself" = yes; then
+	    $show "generating symbol list for \`$output'"
+
+	    test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist"
+
+	    # Add our own program objects to the symbol list.
+	    progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+	    for arg in $progfiles; do
+	      $show "extracting global C symbols from \`$arg'"
+	      $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
+	    done
+
+	    if test -n "$exclude_expsyms"; then
+	      $run eval 'egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
+	      $run eval '$mv "$nlist"T "$nlist"'
+	    fi
+
+	    if test -n "$export_symbols_regex"; then
+	      $run eval 'egrep -e "$export_symbols_regex" "$nlist" > "$nlist"T'
+	      $run eval '$mv "$nlist"T "$nlist"'
+	    fi
+
+	    # Prepare the list of exported symbols
+	    if test -z "$export_symbols"; then
+	      export_symbols="$output_objdir/$output.exp"
+	      $run $rm $export_symbols
+	      $run eval "${SED} -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+	    else
+	      $run eval "${SED} -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"'
+	      $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T'
+	      $run eval 'mv "$nlist"T "$nlist"'
+	    fi
+	  fi
+
+	  for arg in $dlprefiles; do
+	    $show "extracting global C symbols from \`$arg'"
+	    name=`echo "$arg" | ${SED} -e 's%^.*/%%'`
+	    $run eval 'echo ": $name " >> "$nlist"'
+	    $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
+	  done
+
+	  if test -z "$run"; then
+	    # Make sure we have at least an empty file.
+	    test -f "$nlist" || : > "$nlist"
+
+	    if test -n "$exclude_expsyms"; then
+	      egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
+	      $mv "$nlist"T "$nlist"
+	    fi
+
+	    # Try sorting and uniquifying the output.
+	    if grep -v "^: " < "$nlist" |
+		if sort -k 3 </dev/null >/dev/null 2>&1; then
+		  sort -k 3
+		else
+		  sort +2
+		fi |
+		uniq > "$nlist"S; then
+	      :
+	    else
+	      grep -v "^: " < "$nlist" > "$nlist"S
+	    fi
+
+	    if test -f "$nlist"S; then
+	      eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"'
+	    else
+	      echo '/* NONE */' >> "$output_objdir/$dlsyms"
+	    fi
+
+	    $echo >> "$output_objdir/$dlsyms" "\
+
+#undef lt_preloaded_symbols
+
+#if defined (__STDC__) && __STDC__
+# define lt_ptr void *
+#else
+# define lt_ptr char *
+# define const
+#endif
+
+/* The mapping between symbol names and symbols. */
+const struct {
+  const char *name;
+  lt_ptr address;
+}
+lt_preloaded_symbols[] =
+{\
+"
+
+	    eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms"
+
+	    $echo >> "$output_objdir/$dlsyms" "\
+  {0, (lt_ptr) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif\
+"
+	  fi
+
+	  pic_flag_for_symtable=
+	  case $host in
+	  # compiling the symbol table file with pic_flag works around
+	  # a FreeBSD bug that causes programs to crash when -lm is
+	  # linked before any other PIC object.  But we must not use
+	  # pic_flag when linking with -static.  The problem exists in
+	  # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
+	  *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
+	    case "$compile_command " in
+	    *" -static "*) ;;
+	    *) pic_flag_for_symtable=" $pic_flag -DPIC -DFREEBSD_WORKAROUND";;
+	    esac;;
+	  *-*-hpux*)
+	    case "$compile_command " in
+	    *" -static "*) ;;
+	    *) pic_flag_for_symtable=" $pic_flag -DPIC";;
+	    esac
+	  esac
+
+	  # Now compile the dynamic symbol file.
+	  $show "(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
+	  $run eval '(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
+
+	  # Clean up the generated files.
+	  $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
+	  $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
+
+	  # Transform the symbol file into the correct name.
+	  compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+	  finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+	  ;;
+	*)
+	  $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
+	  exit 1
+	  ;;
+	esac
+      else
+	# We keep going just in case the user didn't refer to
+	# lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
+	# really was required.
+
+	# Nullify the symbol file.
+	compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
+	finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
+      fi
+
+      if test $need_relink = no || test "$build_libtool_libs" != yes; then
+	# Replace the output file specification.
+	compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+	link_command="$compile_command$compile_rpath"
+
+	# We have no uninstalled library dependencies, so finalize right now.
+	$show "$link_command"
+	$run eval "$link_command"
+	status=$?
+
+	# Delete the generated files.
+	if test -n "$dlsyms"; then
+	  $show "$rm $output_objdir/${outputname}S.${objext}"
+	  $run $rm "$output_objdir/${outputname}S.${objext}"
+	fi
+
+	exit $status
+      fi
+
+      if test -n "$shlibpath_var"; then
+	# We should set the shlibpath_var
+	rpath=
+	for dir in $temp_rpath; do
+	  case $dir in
+	  [\\/]* | [A-Za-z]:[\\/]*)
+	    # Absolute path.
+	    rpath="$rpath$dir:"
+	    ;;
+	  *)
+	    # Relative path: add a thisdir entry.
+	    rpath="$rpath\$thisdir/$dir:"
+	    ;;
+	  esac
+	done
+	temp_rpath="$rpath"
+      fi
+
+      if test -n "$compile_shlibpath$finalize_shlibpath"; then
+	compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
+      fi
+      if test -n "$finalize_shlibpath"; then
+	finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
+      fi
+
+      compile_var=
+      finalize_var=
+      if test -n "$runpath_var"; then
+	if test -n "$perm_rpath"; then
+	  # We should set the runpath_var.
+	  rpath=
+	  for dir in $perm_rpath; do
+	    rpath="$rpath$dir:"
+	  done
+	  compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
+	fi
+	if test -n "$finalize_perm_rpath"; then
+	  # We should set the runpath_var.
+	  rpath=
+	  for dir in $finalize_perm_rpath; do
+	    rpath="$rpath$dir:"
+	  done
+	  finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
+	fi
+      fi
+
+      if test "$no_install" = yes; then
+	# We don't need to create a wrapper script.
+	link_command="$compile_var$compile_command$compile_rpath"
+	# Replace the output file specification.
+	link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+	# Delete the old output file.
+	$run $rm $output
+	# Link the executable and exit
+	$show "$link_command"
+	$run eval "$link_command" || exit $?
+	exit 0
+      fi
+
+      if test "$hardcode_action" = relink; then
+	# Fast installation is not supported
+	link_command="$compile_var$compile_command$compile_rpath"
+	relink_command="$finalize_var$finalize_command$finalize_rpath"
+
+	$echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2
+	$echo "$modename: \`$output' will be relinked during installation" 1>&2
+      else
+	if test "$fast_install" != no; then
+	  link_command="$finalize_var$compile_command$finalize_rpath"
+	  if test "$fast_install" = yes; then
+	    relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
+	  else
+	    # fast_install is set to needless
+	    relink_command=
+	  fi
+	else
+	  link_command="$compile_var$compile_command$compile_rpath"
+	  relink_command="$finalize_var$finalize_command$finalize_rpath"
+	fi
+      fi
+
+      # Replace the output file specification.
+      link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+
+      # Delete the old output files.
+      $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname
+
+      $show "$link_command"
+      $run eval "$link_command" || exit $?
+
+      # Now create the wrapper script.
+      $show "creating $output"
+
+      # Quote the relink command for shipping.
+      if test -n "$relink_command"; then
+	# Preserve any variables that may affect compiler behavior
+	for var in $variables_saved_for_relink; do
+	  if eval test -z \"\${$var+set}\"; then
+	    relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
+	  elif eval var_value=\$$var; test -z "$var_value"; then
+	    relink_command="$var=; export $var; $relink_command"
+	  else
+	    var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
+	    relink_command="$var=\"$var_value\"; export $var; $relink_command"
+	  fi
+	done
+	relink_command="(cd `pwd`; $relink_command)"
+	relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+      fi
+
+      # Quote $echo for shipping.
+      if test "X$echo" = "X$SHELL $0 --fallback-echo"; then
+	case $0 in
+	[\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";;
+	*) qecho="$SHELL `pwd`/$0 --fallback-echo";;
+	esac
+	qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
+      else
+	qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"`
+      fi
+
+      # Only actually do things if our run command is non-null.
+      if test -z "$run"; then
+	# win32 will think the script is a binary if it has
+	# a .exe suffix, so we strip it off here.
+	case $output in
+	  *.exe) output=`echo $output|${SED} 's,.exe$,,'` ;;
+	esac
+	# test for cygwin because mv fails w/o .exe extensions
+	case $host in
+	  *cygwin*) exeext=.exe ;;
+	  *) exeext= ;;
+	esac
+	$rm $output
+	trap "$rm $output; exit 1" 1 2 15
+
+	$echo > $output "\
+#! $SHELL
+
+# $output - temporary wrapper script for $objdir/$outputname
+# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+#
+# The $output program cannot be directly executed until all the libtool
+# libraries that it depends on are installed.
+#
+# This wrapper script should never be moved out of the build directory.
+# If it is, it will not operate correctly.
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed="${SED}"' -e 1s/^X//'
+sed_quote_subst='$sed_quote_subst'
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi
+
+relink_command=\"$relink_command\"
+
+# This environment variable determines our operation mode.
+if test \"\$libtool_install_magic\" = \"$magic\"; then
+  # install mode needs the following variable:
+  notinst_deplibs='$notinst_deplibs'
+else
+  # When we are sourced in execute mode, \$file and \$echo are already set.
+  if test \"\$libtool_execute_magic\" != \"$magic\"; then
+    echo=\"$qecho\"
+    file=\"\$0\"
+    # Make sure echo works.
+    if test \"X\$1\" = X--no-reexec; then
+      # Discard the --no-reexec flag, and continue.
+      shift
+    elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then
+      # Yippee, \$echo works!
+      :
+    else
+      # Restart under the correct shell, and then maybe \$echo will work.
+      exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
+    fi
+  fi\
+"
+	$echo >> $output "\
+
+  # Find the directory that this script lives in.
+  thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
+  test \"x\$thisdir\" = \"x\$file\" && thisdir=.
+
+  # Follow symbolic links until we get to the real thisdir.
+  file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
+  while test -n \"\$file\"; do
+    destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
+
+    # If there was a directory component, then change thisdir.
+    if test \"x\$destdir\" != \"x\$file\"; then
+      case \"\$destdir\" in
+      [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
+      *) thisdir=\"\$thisdir/\$destdir\" ;;
+      esac
+    fi
+
+    file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
+    file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
+  done
+
+  # Try to get the absolute directory name.
+  absdir=\`cd \"\$thisdir\" && pwd\`
+  test -n \"\$absdir\" && thisdir=\"\$absdir\"
+"
+
+	if test "$fast_install" = yes; then
+	  echo >> $output "\
+  program=lt-'$outputname'$exeext
+  progdir=\"\$thisdir/$objdir\"
+
+  if test ! -f \"\$progdir/\$program\" || \\
+     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
+       test \"X\$file\" != \"X\$progdir/\$program\"; }; then
+
+    file=\"\$\$-\$program\"
+
+    if test ! -d \"\$progdir\"; then
+      $mkdir \"\$progdir\"
+    else
+      $rm \"\$progdir/\$file\"
+    fi"
+
+	  echo >> $output "\
+
+    # relink executable if necessary
+    if test -n \"\$relink_command\"; then
+      if relink_command_output=\`eval \$relink_command 2>&1\`; then :
+      else
+	$echo \"\$relink_command_output\" >&2
+	$rm \"\$progdir/\$file\"
+	exit 1
+      fi
+    fi
+
+    $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
+    { $rm \"\$progdir/\$program\";
+      $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; }
+    $rm \"\$progdir/\$file\"
+  fi"
+	else
+	  echo >> $output "\
+  program='$outputname'
+  progdir=\"\$thisdir/$objdir\"
+"
+	fi
+
+	echo >> $output "\
+
+  if test -f \"\$progdir/\$program\"; then"
+
+	# Export our shlibpath_var if we have one.
+	if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+	  $echo >> $output "\
+    # Add our own library path to $shlibpath_var
+    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
+
+    # Some systems cannot cope with colon-terminated $shlibpath_var
+    # The second colon is a workaround for a bug in BeOS R4 ${SED}
+    $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
+
+    export $shlibpath_var
+"
+	fi
+
+	# fixup the dll searchpath if we need to.
+	if test -n "$dllsearchpath"; then
+	  $echo >> $output "\
+    # Add the dll search path components to the executable PATH
+    PATH=$dllsearchpath:\$PATH
+"
+	fi
+
+	$echo >> $output "\
+    if test \"\$libtool_execute_magic\" != \"$magic\"; then
+      # Run the actual program with our arguments.
+"
+	case $host in
+	# win32 systems need to use the prog path for dll
+	# lookup to work
+	*-*-cygwin* | *-*-pw32*)
+	  $echo >> $output "\
+      exec \$progdir/\$program \${1+\"\$@\"}
+"
+	  ;;
+
+	# Backslashes separate directories on plain windows
+	*-*-mingw | *-*-os2*)
+	  $echo >> $output "\
+      exec \$progdir\\\\\$program \${1+\"\$@\"}
+"
+	  ;;
+
+	*)
+	  $echo >> $output "\
+      # Export the path to the program.
+      PATH=\"\$progdir:\$PATH\"
+      export PATH
+
+      exec \$program \${1+\"\$@\"}
+"
+	  ;;
+	esac
+	$echo >> $output "\
+      \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
+      exit 1
+    fi
+  else
+    # The program doesn't exist.
+    \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2
+    \$echo \"This script is just a wrapper for \$program.\" 1>&2
+    echo \"See the $PACKAGE documentation for more information.\" 1>&2
+    exit 1
+  fi
+fi\
+"
+	chmod +x $output
+      fi
+      exit 0
+      ;;
+    esac
+
+    # See if we need to build an old-fashioned archive.
+    for oldlib in $oldlibs; do
+
+      if test "$build_libtool_libs" = convenience; then
+	oldobjs="$libobjs_save"
+	addlibs="$convenience"
+	build_libtool_libs=no
+      else
+	if test "$build_libtool_libs" = module; then
+	  oldobjs="$libobjs_save"
+	  build_libtool_libs=no
+	else
+	  oldobjs="$objs$old_deplibs "`$echo "X$libobjs_save" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`
+	fi
+	addlibs="$old_convenience"
+      fi
+
+      if test -n "$addlibs"; then
+	gentop="$output_objdir/${outputname}x"
+	$show "${rm}r $gentop"
+	$run ${rm}r "$gentop"
+	$show "mkdir $gentop"
+	$run mkdir "$gentop"
+	status=$?
+	if test $status -ne 0 && test ! -d "$gentop"; then
+	  exit $status
+	fi
+	generated="$generated $gentop"
+
+	# Add in members from convenience archives.
+	for xlib in $addlibs; do
+	  # Extract the objects.
+	  case $xlib in
+	  [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
+	  *) xabs=`pwd`"/$xlib" ;;
+	  esac
+	  xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
+	  xdir="$gentop/$xlib"
+
+	  $show "${rm}r $xdir"
+	  $run ${rm}r "$xdir"
+	  $show "mkdir $xdir"
+	  $run mkdir "$xdir"
+	  status=$?
+	  if test $status -ne 0 && test ! -d "$xdir"; then
+	    exit $status
+	  fi
+	  $show "(cd $xdir && $AR x $xabs)"
+	  $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
+
+	  oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP`
+	done
+      fi
+
+      # Do each command in the archive commands.
+      if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
+	eval cmds=\"$old_archive_from_new_cmds\"
+      else
+	# Ensure that we have .o objects in place in case we decided
+	# not to build a shared library, and have fallen back to building
+	# static libs even though --disable-static was passed!
+	for oldobj in $oldobjs; do
+	  if test ! -f $oldobj; then
+	    xdir=`$echo "X$oldobj" | $Xsed -e 's%/[^/]*$%%'`
+	    if test "X$xdir" = "X$oldobj"; then
+	      xdir="."
+	    else
+	      xdir="$xdir"
+	    fi
+	    baseobj=`$echo "X$oldobj" | $Xsed -e 's%^.*/%%'`
+	    obj=`$echo "X$baseobj" | $Xsed -e "$o2lo"`
+	    $show "(cd $xdir && ${LN_S} $obj $baseobj)"
+	    $run eval '(cd $xdir && ${LN_S} $obj $baseobj)' || exit $?
+	  fi
+	done
+
+	eval cmds=\"$old_archive_cmds\"
+      fi
+      save_ifs="$IFS"; IFS='~'
+      for cmd in $cmds; do
+	IFS="$save_ifs"
+	$show "$cmd"
+	$run eval "$cmd" || exit $?
+      done
+      IFS="$save_ifs"
+    done
+
+    if test -n "$generated"; then
+      $show "${rm}r$generated"
+      $run ${rm}r$generated
+    fi
+
+    # Now create the libtool archive.
+    case $output in
+    *.la)
+      old_library=
+      test "$build_old_libs" = yes && old_library="$libname.$libext"
+      $show "creating $output"
+
+      # Preserve any variables that may affect compiler behavior
+      for var in $variables_saved_for_relink; do
+	if eval test -z \"\${$var+set}\"; then
+	  relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
+	elif eval var_value=\$$var; test -z "$var_value"; then
+	  relink_command="$var=; export $var; $relink_command"
+	else
+	  var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
+	  relink_command="$var=\"$var_value\"; export $var; $relink_command"
+	fi
+      done
+      # Quote the link command for shipping.
+      relink_command="(cd `pwd`; $SHELL $0 --mode=relink $libtool_args @inst_prefix_dir@)"
+      relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+
+      # Only create the output if not a dry run.
+      if test -z "$run"; then
+	for installed in no yes; do
+	  if test "$installed" = yes; then
+	    if test -z "$install_libdir"; then
+	      break
+	    fi
+	    output="$output_objdir/$outputname"i
+	    # Replace all uninstalled libtool libraries with the installed ones
+	    newdependency_libs=
+	    for deplib in $dependency_libs; do
+	      case $deplib in
+	      *.la)
+		name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`
+		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+		if test -z "$libdir"; then
+		  $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
+		  exit 1
+		fi
+		newdependency_libs="$newdependency_libs $libdir/$name"
+		;;
+	      *) newdependency_libs="$newdependency_libs $deplib" ;;
+	      esac
+	    done
+	    dependency_libs="$newdependency_libs"
+	    newdlfiles=
+	    for lib in $dlfiles; do
+	      name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
+	      eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+	      if test -z "$libdir"; then
+		$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+		exit 1
+	      fi
+	      newdlfiles="$newdlfiles $libdir/$name"
+	    done
+	    dlfiles="$newdlfiles"
+	    newdlprefiles=
+	    for lib in $dlprefiles; do
+	      name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
+	      eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+	      if test -z "$libdir"; then
+		$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+		exit 1
+	      fi
+	      newdlprefiles="$newdlprefiles $libdir/$name"
+	    done
+	    dlprefiles="$newdlprefiles"
+	  fi
+	  $rm $output
+	  # place dlname in correct position for cygwin
+	  tdlname=$dlname
+	  case $host,$output,$installed,$module,$dlname in
+	    *cygwin*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
+	  esac
+	  $echo > $output "\
+# $outputname - a libtool library file
+# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# The name that we can dlopen(3).
+dlname='$tdlname'
+
+# Names of this library.
+library_names='$library_names'
+
+# The name of the static archive.
+old_library='$old_library'
+
+# Libraries that this one depends upon.
+dependency_libs='$dependency_libs'
+
+# Version information for $libname.
+current=$current
+age=$age
+revision=$revision
+
+# Is this an already installed library?
+installed=$installed
+
+# Files to dlopen/dlpreopen
+dlopen='$dlfiles'
+dlpreopen='$dlprefiles'
+
+# Directory that this library needs to be installed in:
+libdir='$install_libdir'"
+	  if test "$installed" = no && test $need_relink = yes; then
+	    $echo >> $output "\
+relink_command=\"$relink_command\""
+	  fi
+	done
+      fi
+
+      # Do a symbolic link so that the libtool archive can be found in
+      # LD_LIBRARY_PATH before the program is installed.
+      $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)"
+      $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $?
+      ;;
+    esac
+    exit 0
+    ;;
+
+  # libtool install mode
+  install)
+    modename="$modename: install"
+
+    # There may be an optional sh(1) argument at the beginning of
+    # install_prog (especially on Windows NT).
+    if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
+       # Allow the use of GNU shtool's install command.
+       $echo "X$nonopt" | $Xsed | grep shtool > /dev/null; then
+      # Aesthetically quote it.
+      arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
+      case $arg in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+	arg="\"$arg\""
+	;;
+      esac
+      install_prog="$arg "
+      arg="$1"
+      shift
+    else
+      install_prog=
+      arg="$nonopt"
+    fi
+
+    # The real first argument should be the name of the installation program.
+    # Aesthetically quote it.
+    arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+    case $arg in
+    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+      arg="\"$arg\""
+      ;;
+    esac
+    install_prog="$install_prog$arg"
+
+    # We need to accept at least all the BSD install flags.
+    dest=
+    files=
+    opts=
+    prev=
+    install_type=
+    isdir=no
+    stripme=
+    for arg
+    do
+      if test -n "$dest"; then
+	files="$files $dest"
+	dest="$arg"
+	continue
+      fi
+
+      case $arg in
+      -d) isdir=yes ;;
+      -f) prev="-f" ;;
+      -g) prev="-g" ;;
+      -m) prev="-m" ;;
+      -o) prev="-o" ;;
+      -s)
+	stripme=" -s"
+	continue
+	;;
+      -*) ;;
+
+      *)
+	# If the previous option needed an argument, then skip it.
+	if test -n "$prev"; then
+	  prev=
+	else
+	  dest="$arg"
+	  continue
+	fi
+	;;
+      esac
+
+      # Aesthetically quote the argument.
+      arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+      case $arg in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+	arg="\"$arg\""
+	;;
+      esac
+      install_prog="$install_prog $arg"
+    done
+
+    if test -z "$install_prog"; then
+      $echo "$modename: you must specify an install program" 1>&2
+      $echo "$help" 1>&2
+      exit 1
+    fi
+
+    if test -n "$prev"; then
+      $echo "$modename: the \`$prev' option requires an argument" 1>&2
+      $echo "$help" 1>&2
+      exit 1
+    fi
+
+    if test -z "$files"; then
+      if test -z "$dest"; then
+	$echo "$modename: no file or destination specified" 1>&2
+      else
+	$echo "$modename: you must specify a destination" 1>&2
+      fi
+      $echo "$help" 1>&2
+      exit 1
+    fi
+
+    # Strip any trailing slash from the destination.
+    dest=`$echo "X$dest" | $Xsed -e 's%/$%%'`
+
+    # Check to see that the destination is a directory.
+    test -d "$dest" && isdir=yes
+    if test "$isdir" = yes; then
+      destdir="$dest"
+      destname=
+    else
+      destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'`
+      test "X$destdir" = "X$dest" && destdir=.
+      destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'`
+
+      # Not a directory, so check to see that there is only one file specified.
+      set dummy $files
+      if test $# -gt 2; then
+	$echo "$modename: \`$dest' is not a directory" 1>&2
+	$echo "$help" 1>&2
+	exit 1
+      fi
+    fi
+    case $destdir in
+    [\\/]* | [A-Za-z]:[\\/]*) ;;
+    *)
+      for file in $files; do
+	case $file in
+	*.lo) ;;
+	*)
+	  $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
+	  $echo "$help" 1>&2
+	  exit 1
+	  ;;
+	esac
+      done
+      ;;
+    esac
+
+    # This variable tells wrapper scripts just to set variables rather
+    # than running their programs.
+    libtool_install_magic="$magic"
+
+    staticlibs=
+    future_libdirs=
+    current_libdirs=
+    for file in $files; do
+
+      # Do each installation.
+      case $file in
+      *.$libext)
+	# Do the static libraries later.
+	staticlibs="$staticlibs $file"
+	;;
+
+      *.la)
+	# Check to see that this really is a libtool archive.
+	if (${SED} -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+	else
+	  $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
+	  $echo "$help" 1>&2
+	  exit 1
+	fi
+
+	library_names=
+	old_library=
+	relink_command=
+	# If there is no directory component, then add one.
+	case $file in
+	*/* | *\\*) . $file ;;
+	*) . ./$file ;;
+	esac
+
+	# Add the libdir to current_libdirs if it is the destination.
+	if test "X$destdir" = "X$libdir"; then
+	  case "$current_libdirs " in
+	  *" $libdir "*) ;;
+	  *) current_libdirs="$current_libdirs $libdir" ;;
+	  esac
+	else
+	  # Note the libdir as a future libdir.
+	  case "$future_libdirs " in
+	  *" $libdir "*) ;;
+	  *) future_libdirs="$future_libdirs $libdir" ;;
+	  esac
+	fi
+
+	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/
+	test "X$dir" = "X$file/" && dir=
+	dir="$dir$objdir"
+
+	if test -n "$relink_command"; then
+          # Determine the prefix the user has applied to our future dir.
+          inst_prefix_dir=`$echo "$destdir" | sed "s%$libdir\$%%"`
+ 
+          # Don't allow the user to place us outside of our expected
+          # location b/c this prevents finding dependent libraries that
+          # are installed to the same prefix.
+          if test "$inst_prefix_dir" = "$destdir"; then
+            $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2
+            exit 1
+          fi
+ 
+          if test -n "$inst_prefix_dir"; then
+            # Stick the inst_prefix_dir data into the link command.
+            relink_command=`$echo "$relink_command" | sed "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
+          else
+            relink_command=`$echo "$relink_command" | sed "s%@inst_prefix_dir@%%"`
+          fi
+
+	  $echo "$modename: warning: relinking \`$file'" 1>&2
+	  $show "$relink_command"
+	  if $run eval "$relink_command"; then :
+	  else
+	    $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
+	    exit 1
+	  fi
+	fi
+
+	# See the names of the shared library.
+	set dummy $library_names
+	if test -n "$2"; then
+	  realname="$2"
+	  shift
+	  shift
+
+	  srcname="$realname"
+	  test -n "$relink_command" && srcname="$realname"T
+
+	  # Install the shared library and build the symlinks.
+	  $show "$install_prog $dir/$srcname $destdir/$realname"
+	  $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $?
+	  if test -n "$stripme" && test -n "$striplib"; then
+	    $show "$striplib $destdir/$realname"
+	    $run eval "$striplib $destdir/$realname" || exit $?
+	  fi
+
+	  if test $# -gt 0; then
+	    # Delete the old symlinks, and create new ones.
+	    for linkname
+	    do
+	      if test "$linkname" != "$realname"; then
+		$show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
+		$run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
+	      fi
+	    done
+	  fi
+
+	  # Do each command in the postinstall commands.
+	  lib="$destdir/$realname"
+	  eval cmds=\"$postinstall_cmds\"
+	  save_ifs="$IFS"; IFS='~'
+	  for cmd in $cmds; do
+	    IFS="$save_ifs"
+	    $show "$cmd"
+	    $run eval "$cmd" || exit $?
+	  done
+	  IFS="$save_ifs"
+	fi
+
+	# Install the pseudo-library for information purposes.
+	name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+	instname="$dir/$name"i
+	$show "$install_prog $instname $destdir/$name"
+	$run eval "$install_prog $instname $destdir/$name" || exit $?
+
+	# Maybe install the static library, too.
+	test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
+	;;
+
+      *.lo)
+	# Install (i.e. copy) a libtool object.
+
+	# Figure out destination file name, if it wasn't already specified.
+	if test -n "$destname"; then
+	  destfile="$destdir/$destname"
+	else
+	  destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+	  destfile="$destdir/$destfile"
+	fi
+
+	# Deduce the name of the destination old-style object file.
+	case $destfile in
+	*.lo)
+	  staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"`
+	  ;;
+	*.$objext)
+	  staticdest="$destfile"
+	  destfile=
+	  ;;
+	*)
+	  $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
+	  $echo "$help" 1>&2
+	  exit 1
+	  ;;
+	esac
+
+	# Install the libtool object if requested.
+	if test -n "$destfile"; then
+	  $show "$install_prog $file $destfile"
+	  $run eval "$install_prog $file $destfile" || exit $?
+	fi
+
+	# Install the old object if enabled.
+	if test "$build_old_libs" = yes; then
+	  # Deduce the name of the old-style object file.
+	  staticobj=`$echo "X$file" | $Xsed -e "$lo2o"`
+
+	  $show "$install_prog $staticobj $staticdest"
+	  $run eval "$install_prog \$staticobj \$staticdest" || exit $?
+	fi
+	exit 0
+	;;
+
+      *)
+	# Figure out destination file name, if it wasn't already specified.
+	if test -n "$destname"; then
+	  destfile="$destdir/$destname"
+	else
+	  destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+	  destfile="$destdir/$destfile"
+	fi
+
+	# Do a test to see if this is really a libtool program.
+	case $host in
+	*cygwin*|*mingw*)
+	    wrapper=`echo $file | ${SED} -e 's,.exe$,,'`
+	    ;;
+	*)
+	    wrapper=$file
+	    ;;
+	esac
+	if (${SED} -e '4q' $wrapper | egrep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then
+	  notinst_deplibs=
+	  relink_command=
+
+	  # If there is no directory component, then add one.
+	  case $file in
+	  */* | *\\*) . $wrapper ;;
+	  *) . ./$wrapper ;;
+	  esac
+
+	  # Check the variables that should have been set.
+	  if test -z "$notinst_deplibs"; then
+	    $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2
+	    exit 1
+	  fi
+
+	  finalize=yes
+	  for lib in $notinst_deplibs; do
+	    # Check to see that each library is installed.
+	    libdir=
+	    if test -f "$lib"; then
+	      # If there is no directory component, then add one.
+	      case $lib in
+	      */* | *\\*) . $lib ;;
+	      *) . ./$lib ;;
+	      esac
+	    fi
+	    libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
+	    if test -n "$libdir" && test ! -f "$libfile"; then
+	      $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2
+	      finalize=no
+	    fi
+	  done
+
+	  relink_command=
+	  # If there is no directory component, then add one.
+	  case $file in
+	  */* | *\\*) . $wrapper ;;
+	  *) . ./$wrapper ;;
+	  esac
+
+	  outputname=
+	  if test "$fast_install" = no && test -n "$relink_command"; then
+	    if test "$finalize" = yes && test -z "$run"; then
+	      tmpdir="/tmp"
+	      test -n "$TMPDIR" && tmpdir="$TMPDIR"
+	      tmpdir="$tmpdir/libtool-$$"
+	      if $mkdir -p "$tmpdir" && chmod 700 "$tmpdir"; then :
+	      else
+		$echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2
+		continue
+	      fi
+	      file=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+	      outputname="$tmpdir/$file"
+	      # Replace the output file specification.
+	      relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
+
+	      $show "$relink_command"
+	      if $run eval "$relink_command"; then :
+	      else
+		$echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
+		${rm}r "$tmpdir"
+		continue
+	      fi
+	      file="$outputname"
+	    else
+	      $echo "$modename: warning: cannot relink \`$file'" 1>&2
+	    fi
+	  else
+	    # Install the binary that we compiled earlier.
+	    file=`$echo "X$file" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
+	  fi
+	fi
+
+	# remove .exe since cygwin /usr/bin/install will append another
+	# one anyways
+	case $install_prog,$host in
+	/usr/bin/install*,*cygwin*)
+	  case $file:$destfile in
+	  *.exe:*.exe)
+	    # this is ok
+	    ;;
+	  *.exe:*)
+	    destfile=$destfile.exe
+	    ;;
+	  *:*.exe)
+	    destfile=`echo $destfile | ${SED} -e 's,.exe$,,'`
+	    ;;
+	  esac
+	  ;;
+	esac
+	$show "$install_prog$stripme $file $destfile"
+	$run eval "$install_prog\$stripme \$file \$destfile" || exit $?
+	test -n "$outputname" && ${rm}r "$tmpdir"
+	;;
+      esac
+    done
+
+    for file in $staticlibs; do
+      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+
+      # Set up the ranlib parameters.
+      oldlib="$destdir/$name"
+
+      $show "$install_prog $file $oldlib"
+      $run eval "$install_prog \$file \$oldlib" || exit $?
+
+      if test -n "$stripme" && test -n "$striplib"; then
+	$show "$old_striplib $oldlib"
+	$run eval "$old_striplib $oldlib" || exit $?
+      fi
+
+      # Do each command in the postinstall commands.
+      eval cmds=\"$old_postinstall_cmds\"
+      save_ifs="$IFS"; IFS='~'
+      for cmd in $cmds; do
+	IFS="$save_ifs"
+	$show "$cmd"
+	$run eval "$cmd" || exit $?
+      done
+      IFS="$save_ifs"
+    done
+
+    if test -n "$future_libdirs"; then
+      $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2
+    fi
+
+    if test -n "$current_libdirs"; then
+      # Maybe just do a dry run.
+      test -n "$run" && current_libdirs=" -n$current_libdirs"
+      exec_cmd='$SHELL $0 --finish$current_libdirs'
+    else
+      exit 0
+    fi
+    ;;
+
+  # libtool finish mode
+  finish)
+    modename="$modename: finish"
+    libdirs="$nonopt"
+    admincmds=
+
+    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+      for dir
+      do
+	libdirs="$libdirs $dir"
+      done
+
+      for libdir in $libdirs; do
+	if test -n "$finish_cmds"; then
+	  # Do each command in the finish commands.
+	  eval cmds=\"$finish_cmds\"
+	  save_ifs="$IFS"; IFS='~'
+	  for cmd in $cmds; do
+	    IFS="$save_ifs"
+	    $show "$cmd"
+	    $run eval "$cmd" || admincmds="$admincmds
+       $cmd"
+	  done
+	  IFS="$save_ifs"
+	fi
+	if test -n "$finish_eval"; then
+	  # Do the single finish_eval.
+	  eval cmds=\"$finish_eval\"
+	  $run eval "$cmds" || admincmds="$admincmds
+       $cmds"
+	fi
+      done
+    fi
+
+    # Exit here if they wanted silent mode.
+    test "$show" = ":" && exit 0
+
+    echo "----------------------------------------------------------------------"
+    echo "Libraries have been installed in:"
+    for libdir in $libdirs; do
+      echo "   $libdir"
+    done
+    echo
+    echo "If you ever happen to want to link against installed libraries"
+    echo "in a given directory, LIBDIR, you must either use libtool, and"
+    echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
+    echo "flag during linking and do at least one of the following:"
+    if test -n "$shlibpath_var"; then
+      echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
+      echo "     during execution"
+    fi
+    if test -n "$runpath_var"; then
+      echo "   - add LIBDIR to the \`$runpath_var' environment variable"
+      echo "     during linking"
+    fi
+    if test -n "$hardcode_libdir_flag_spec"; then
+      libdir=LIBDIR
+      eval flag=\"$hardcode_libdir_flag_spec\"
+
+      echo "   - use the \`$flag' linker flag"
+    fi
+    if test -n "$admincmds"; then
+      echo "   - have your system administrator run these commands:$admincmds"
+    fi
+    if test -f /etc/ld.so.conf; then
+      echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+    fi
+    echo
+    echo "See any operating system documentation about shared libraries for"
+    echo "more information, such as the ld(1) and ld.so(8) manual pages."
+    echo "----------------------------------------------------------------------"
+    exit 0
+    ;;
+
+  # libtool execute mode
+  execute)
+    modename="$modename: execute"
+
+    # The first argument is the command name.
+    cmd="$nonopt"
+    if test -z "$cmd"; then
+      $echo "$modename: you must specify a COMMAND" 1>&2
+      $echo "$help"
+      exit 1
+    fi
+
+    # Handle -dlopen flags immediately.
+    for file in $execute_dlfiles; do
+      if test ! -f "$file"; then
+	$echo "$modename: \`$file' is not a file" 1>&2
+	$echo "$help" 1>&2
+	exit 1
+      fi
+
+      dir=
+      case $file in
+      *.la)
+	# Check to see that this really is a libtool archive.
+	if (${SED} -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+	else
+	  $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+	  $echo "$help" 1>&2
+	  exit 1
+	fi
+
+	# Read the libtool library.
+	dlname=
+	library_names=
+
+	# If there is no directory component, then add one.
+	case $file in
+	*/* | *\\*) . $file ;;
+	*) . ./$file ;;
+	esac
+
+	# Skip this library if it cannot be dlopened.
+	if test -z "$dlname"; then
+	  # Warn if it was a shared library.
+	  test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'"
+	  continue
+	fi
+
+	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+	test "X$dir" = "X$file" && dir=.
+
+	if test -f "$dir/$objdir/$dlname"; then
+	  dir="$dir/$objdir"
+	else
+	  $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
+	  exit 1
+	fi
+	;;
+
+      *.lo)
+	# Just add the directory containing the .lo file.
+	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+	test "X$dir" = "X$file" && dir=.
+	;;
+
+      *)
+	$echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2
+	continue
+	;;
+      esac
+
+      # Get the absolute pathname.
+      absdir=`cd "$dir" && pwd`
+      test -n "$absdir" && dir="$absdir"
+
+      # Now add the directory to shlibpath_var.
+      if eval "test -z \"\$$shlibpath_var\""; then
+	eval "$shlibpath_var=\"\$dir\""
+      else
+	eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
+      fi
+    done
+
+    # This variable tells wrapper scripts just to set shlibpath_var
+    # rather than running their programs.
+    libtool_execute_magic="$magic"
+
+    # Check if any of the arguments is a wrapper script.
+    args=
+    for file
+    do
+      case $file in
+      -*) ;;
+      *)
+	# Do a test to see if this is really a libtool program.
+	if (${SED} -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+	  # If there is no directory component, then add one.
+	  case $file in
+	  */* | *\\*) . $file ;;
+	  *) . ./$file ;;
+	  esac
+
+	  # Transform arg to wrapped name.
+	  file="$progdir/$program"
+	fi
+	;;
+      esac
+      # Quote arguments (to preserve shell metacharacters).
+      file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"`
+      args="$args \"$file\""
+    done
+
+    if test -z "$run"; then
+      if test -n "$shlibpath_var"; then
+	# Export the shlibpath_var.
+	eval "export $shlibpath_var"
+      fi
+
+      # Restore saved enviroment variables
+      if test "${save_LC_ALL+set}" = set; then
+	LC_ALL="$save_LC_ALL"; export LC_ALL
+      fi
+      if test "${save_LANG+set}" = set; then
+	LANG="$save_LANG"; export LANG
+      fi
+
+      # Now prepare to actually exec the command.
+      exec_cmd="\$cmd$args"
+    else
+      # Display what would be done.
+      if test -n "$shlibpath_var"; then
+	eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
+	$echo "export $shlibpath_var"
+      fi
+      $echo "$cmd$args"
+      exit 0
+    fi
+    ;;
+
+  # libtool clean and uninstall mode
+  clean | uninstall)
+    modename="$modename: $mode"
+    rm="$nonopt"
+    files=
+    rmforce=
+    exit_status=0
+
+    # This variable tells wrapper scripts just to set variables rather
+    # than running their programs.
+    libtool_install_magic="$magic"
+
+    for arg
+    do
+      case $arg in
+      -f) rm="$rm $arg"; rmforce=yes ;;
+      -*) rm="$rm $arg" ;;
+      *) files="$files $arg" ;;
+      esac
+    done
+
+    if test -z "$rm"; then
+      $echo "$modename: you must specify an RM program" 1>&2
+      $echo "$help" 1>&2
+      exit 1
+    fi
+
+    rmdirs=
+
+    for file in $files; do
+      dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+      if test "X$dir" = "X$file"; then
+	dir=.
+	objdir="$objdir"
+      else
+	objdir="$dir/$objdir"
+      fi
+      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+      test $mode = uninstall && objdir="$dir"
+
+      # Remember objdir for removal later, being careful to avoid duplicates
+      if test $mode = clean; then
+	case " $rmdirs " in
+	  *" $objdir "*) ;;
+	  *) rmdirs="$rmdirs $objdir" ;;
+	esac
+      fi
+
+      # Don't error if the file doesn't exist and rm -f was used.
+      if (test -L "$file") >/dev/null 2>&1 \
+	|| (test -h "$file") >/dev/null 2>&1 \
+	|| test -f "$file"; then
+	:
+      elif test -d "$file"; then
+	exit_status=1
+	continue
+      elif test "$rmforce" = yes; then
+	continue
+      fi
+
+      rmfiles="$file"
+
+      case $name in
+      *.la)
+	# Possibly a libtool archive, so verify it.
+	if (${SED} -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+	  . $dir/$name
+
+	  # Delete the libtool libraries and symlinks.
+	  for n in $library_names; do
+	    rmfiles="$rmfiles $objdir/$n"
+	  done
+	  test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
+	  test $mode = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
+
+	  if test $mode = uninstall; then
+	    if test -n "$library_names"; then
+	      # Do each command in the postuninstall commands.
+	      eval cmds=\"$postuninstall_cmds\"
+	      save_ifs="$IFS"; IFS='~'
+	      for cmd in $cmds; do
+		IFS="$save_ifs"
+		$show "$cmd"
+		$run eval "$cmd"
+		if test $? != 0 && test "$rmforce" != yes; then
+		  exit_status=1
+		fi
+	      done
+	      IFS="$save_ifs"
+	    fi
+
+	    if test -n "$old_library"; then
+	      # Do each command in the old_postuninstall commands.
+	      eval cmds=\"$old_postuninstall_cmds\"
+	      save_ifs="$IFS"; IFS='~'
+	      for cmd in $cmds; do
+		IFS="$save_ifs"
+		$show "$cmd"
+		$run eval "$cmd"
+		if test $? != 0 && test "$rmforce" != yes; then
+		  exit_status=1
+		fi
+	      done
+	      IFS="$save_ifs"
+	    fi
+	    # FIXME: should reinstall the best remaining shared library.
+	  fi
+	fi
+	;;
+
+      *.lo)
+	if test "$build_old_libs" = yes; then
+	  oldobj=`$echo "X$name" | $Xsed -e "$lo2o"`
+	  rmfiles="$rmfiles $dir/$oldobj"
+	fi
+	;;
+
+      *)
+	# Do a test to see if this is a libtool program.
+	if test $mode = clean &&
+	   (${SED} -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+	  relink_command=
+	  . $dir/$file
+
+	  rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
+	  if test "$fast_install" = yes && test -n "$relink_command"; then
+	    rmfiles="$rmfiles $objdir/lt-$name"
+	  fi
+	fi
+	;;
+      esac
+      $show "$rm $rmfiles"
+      $run $rm $rmfiles || exit_status=1
+    done
+
+    # Try to remove the ${objdir}s in the directories where we deleted files
+    for dir in $rmdirs; do
+      if test -d "$dir"; then
+	$show "rmdir $dir"
+	$run rmdir $dir >/dev/null 2>&1
+      fi
+    done
+
+    exit $exit_status
+    ;;
+
+  "")
+    $echo "$modename: you must specify a MODE" 1>&2
+    $echo "$generic_help" 1>&2
+    exit 1
+    ;;
+  esac
+
+  if test -z "$exec_cmd"; then
+    $echo "$modename: invalid operation mode \`$mode'" 1>&2
+    $echo "$generic_help" 1>&2
+    exit 1
+  fi
+fi # test -z "$show_help"
+
+if test -n "$exec_cmd"; then
+  eval exec $exec_cmd
+  exit 1
+fi
+
+# We need to display help for each of the modes.
+case $mode in
+"") $echo \
+"Usage: $modename [OPTION]... [MODE-ARG]...
+
+Provide generalized library-building support services.
+
+    --config          show all configuration variables
+    --debug           enable verbose shell tracing
+-n, --dry-run         display commands without modifying any files
+    --features        display basic configuration information and exit
+    --finish          same as \`--mode=finish'
+    --help            display this help message and exit
+    --mode=MODE       use operation mode MODE [default=inferred from MODE-ARGS]
+    --quiet           same as \`--silent'
+    --silent          don't print informational messages
+    --version         print version information
+
+MODE must be one of the following:
+
+      clean           remove files from the build directory
+      compile         compile a source file into a libtool object
+      execute         automatically set library path, then run a program
+      finish          complete the installation of libtool libraries
+      install         install libraries or executables
+      link            create a library or an executable
+      uninstall       remove libraries from an installed directory
+
+MODE-ARGS vary depending on the MODE.  Try \`$modename --help --mode=MODE' for
+a more detailed description of MODE."
+  exit 0
+  ;;
+
+clean)
+  $echo \
+"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
+
+Remove files from the build directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, object or program, all the files associated
+with it are deleted. Otherwise, only FILE itself is deleted using RM."
+  ;;
+
+compile)
+  $echo \
+"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
+
+Compile a source file into a libtool library object.
+
+This mode accepts the following additional options:
+
+  -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
+  -prefer-pic       try to building PIC objects only
+  -prefer-non-pic   try to building non-PIC objects only
+  -static           always build a \`.o' file suitable for static linking
+
+COMPILE-COMMAND is a command to be used in creating a \`standard' object file
+from the given SOURCEFILE.
+
+The output file name is determined by removing the directory component from
+SOURCEFILE, then substituting the C source code suffix \`.c' with the
+library object suffix, \`.lo'."
+  ;;
+
+execute)
+  $echo \
+"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]...
+
+Automatically set library path, then run a program.
+
+This mode accepts the following additional options:
+
+  -dlopen FILE      add the directory containing FILE to the library path
+
+This mode sets the library path environment variable according to \`-dlopen'
+flags.
+
+If any of the ARGS are libtool executable wrappers, then they are translated
+into their corresponding uninstalled binary, and any of their required library
+directories are added to the library path.
+
+Then, COMMAND is executed, with ARGS as arguments."
+  ;;
+
+finish)
+  $echo \
+"Usage: $modename [OPTION]... --mode=finish [LIBDIR]...
+
+Complete the installation of libtool libraries.
+
+Each LIBDIR is a directory that contains libtool libraries.
+
+The commands that this mode executes may require superuser privileges.  Use
+the \`--dry-run' option if you just want to see what would be executed."
+  ;;
+
+install)
+  $echo \
+"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND...
+
+Install executables or libraries.
+
+INSTALL-COMMAND is the installation command.  The first component should be
+either the \`install' or \`cp' program.
+
+The rest of the components are interpreted as arguments to that command (only
+BSD-compatible install options are recognized)."
+  ;;
+
+link)
+  $echo \
+"Usage: $modename [OPTION]... --mode=link LINK-COMMAND...
+
+Link object files or libraries together to form another library, or to
+create an executable program.
+
+LINK-COMMAND is a command using the C compiler that you would use to create
+a program from several object files.
+
+The following components of LINK-COMMAND are treated specially:
+
+  -all-static       do not do any dynamic linking at all
+  -avoid-version    do not add a version suffix if possible
+  -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
+  -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
+  -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
+  -export-symbols SYMFILE
+		    try to export only the symbols listed in SYMFILE
+  -export-symbols-regex REGEX
+		    try to export only the symbols matching REGEX
+  -LLIBDIR          search LIBDIR for required installed libraries
+  -lNAME            OUTPUT-FILE requires the installed library libNAME
+  -module           build a library that can dlopened
+  -no-fast-install  disable the fast-install mode
+  -no-install       link a not-installable executable
+  -no-undefined     declare that a library does not refer to external symbols
+  -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
+  -release RELEASE  specify package release information
+  -rpath LIBDIR     the created library will eventually be installed in LIBDIR
+  -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
+  -static           do not do any dynamic linking of libtool libraries
+  -version-info CURRENT[:REVISION[:AGE]]
+		    specify library version info [each variable defaults to 0]
+
+All other options (arguments beginning with \`-') are ignored.
+
+Every other argument is treated as a filename.  Files ending in \`.la' are
+treated as uninstalled libtool libraries, other files are standard or library
+object files.
+
+If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
+only library objects (\`.lo' files) may be specified, and \`-rpath' is
+required, except when creating a convenience library.
+
+If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
+using \`ar' and \`ranlib', or on Windows using \`lib'.
+
+If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
+is created, otherwise an executable program is created."
+  ;;
+
+uninstall)
+  $echo \
+"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
+
+Remove libraries from an installation directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, all the files associated with it are deleted.
+Otherwise, only FILE itself is deleted using RM."
+  ;;
+
+*)
+  $echo "$modename: invalid operation mode \`$mode'" 1>&2
+  $echo "$help" 1>&2
+  exit 1
+  ;;
+esac
+
+echo
+$echo "Try \`$modename --help' for more information about other modes."
+
+exit 0
+
+# Local Variables:
+# mode:shell-script
+# sh-indentation:2
+# End:
diff --git a/missing b/missing
new file mode 100755
index 0000000..6a37006
--- /dev/null
+++ b/missing
@@ -0,0 +1,336 @@
+#! /bin/sh
+# Common stub for a few missing GNU programs while installing.
+# Copyright (C) 1996, 1997, 1999, 2000, 2002 Free Software Foundation, Inc.
+# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+if test $# -eq 0; then
+  echo 1>&2 "Try \`$0 --help' for more information"
+  exit 1
+fi
+
+run=:
+
+# In the cases where this matters, `missing' is being run in the
+# srcdir already.
+if test -f configure.ac; then
+  configure_ac=configure.ac
+else
+  configure_ac=configure.in
+fi
+
+case "$1" in
+--run)
+  # Try to run requested program, and just exit if it succeeds.
+  run=
+  shift
+  "$@" && exit 0
+  ;;
+esac
+
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case "$1" in
+
+  -h|--h|--he|--hel|--help)
+    echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
+error status if there is no known handling for PROGRAM.
+
+Options:
+  -h, --help      display this help and exit
+  -v, --version   output version information and exit
+  --run           try to run the given command, and emulate it if it fails
+
+Supported PROGRAM values:
+  aclocal      touch file \`aclocal.m4'
+  autoconf     touch file \`configure'
+  autoheader   touch file \`config.h.in'
+  automake     touch all \`Makefile.in' files
+  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
+  flex         create \`lex.yy.c', if possible, from existing .c
+  help2man     touch the output file
+  lex          create \`lex.yy.c', if possible, from existing .c
+  makeinfo     touch the output file
+  tar          try tar, gnutar, gtar, then tar without non-portable flags
+  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]"
+    ;;
+
+  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+    echo "missing 0.4 - GNU automake"
+    ;;
+
+  -*)
+    echo 1>&2 "$0: Unknown \`$1' option"
+    echo 1>&2 "Try \`$0 --help' for more information"
+    exit 1
+    ;;
+
+  aclocal*)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    fi
+
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
+         to install the \`Automake' and \`Perl' packages.  Grab them from
+         any GNU archive site."
+    touch aclocal.m4
+    ;;
+
+  autoconf)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    fi
+
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified \`${configure_ac}'.  You might want to install the
+         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
+         archive site."
+    touch configure
+    ;;
+
+  autoheader)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    fi
+
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
+         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
+         from any GNU archive site."
+    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
+    test -z "$files" && files="config.h"
+    touch_files=
+    for f in $files; do
+      case "$f" in
+      *:*) touch_files="$touch_files "`echo "$f" |
+				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
+      *) touch_files="$touch_files $f.in";;
+      esac
+    done
+    touch $touch_files
+    ;;
+
+  automake*)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    fi
+
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
+         You might want to install the \`Automake' and \`Perl' packages.
+         Grab them from any GNU archive site."
+    find . -type f -name Makefile.am -print |
+	   sed 's/\.am$/.in/' |
+	   while read f; do touch "$f"; done
+    ;;
+
+  autom4te)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    fi
+
+    echo 1>&2 "\
+WARNING: \`$1' is needed, and you do not seem to have it handy on your
+         system.  You might have modified some files without having the
+         proper tools for further handling them.
+         You can get \`$1Help2man' as part of \`Autoconf' from any GNU
+         archive site."
+
+    file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
+    test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
+    if test -f "$file"; then
+	touch $file
+    else
+	test -z "$file" || exec >$file
+	echo "#! /bin/sh"
+	echo "# Created by GNU Automake missing as a replacement of"
+	echo "#  $ $@"
+	echo "exit 0"
+	chmod +x $file
+	exit 1
+    fi
+    ;;
+
+  bison|yacc)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified a \`.y' file.  You may need the \`Bison' package
+         in order for those modifications to take effect.  You can get
+         \`Bison' from any GNU archive site."
+    rm -f y.tab.c y.tab.h
+    if [ $# -ne 1 ]; then
+        eval LASTARG="\${$#}"
+	case "$LASTARG" in
+	*.y)
+	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
+	    if [ -f "$SRCFILE" ]; then
+	         cp "$SRCFILE" y.tab.c
+	    fi
+	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
+	    if [ -f "$SRCFILE" ]; then
+	         cp "$SRCFILE" y.tab.h
+	    fi
+	  ;;
+	esac
+    fi
+    if [ ! -f y.tab.h ]; then
+	echo >y.tab.h
+    fi
+    if [ ! -f y.tab.c ]; then
+	echo 'main() { return 0; }' >y.tab.c
+    fi
+    ;;
+
+  lex|flex)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified a \`.l' file.  You may need the \`Flex' package
+         in order for those modifications to take effect.  You can get
+         \`Flex' from any GNU archive site."
+    rm -f lex.yy.c
+    if [ $# -ne 1 ]; then
+        eval LASTARG="\${$#}"
+	case "$LASTARG" in
+	*.l)
+	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+	    if [ -f "$SRCFILE" ]; then
+	         cp "$SRCFILE" lex.yy.c
+	    fi
+	  ;;
+	esac
+    fi
+    if [ ! -f lex.yy.c ]; then
+	echo 'main() { return 0; }' >lex.yy.c
+    fi
+    ;;
+
+  help2man)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    fi
+
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+	 you modified a dependency of a manual page.  You may need the
+	 \`Help2man' package in order for those modifications to take
+	 effect.  You can get \`Help2man' from any GNU archive site."
+
+    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+    if test -z "$file"; then
+	file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
+    fi
+    if [ -f "$file" ]; then
+	touch $file
+    else
+	test -z "$file" || exec >$file
+	echo ".ab help2man is required to generate this page"
+	exit 1
+    fi
+    ;;
+
+  makeinfo)
+    if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then
+       # We have makeinfo, but it failed.
+       exit 1
+    fi
+
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified a \`.texi' or \`.texinfo' file, or any other file
+         indirectly affecting the aspect of the manual.  The spurious
+         call might also be the consequence of using a buggy \`make' (AIX,
+         DU, IRIX).  You might want to install the \`Texinfo' package or
+         the \`GNU make' package.  Grab either from any GNU archive site."
+    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+    if test -z "$file"; then
+      file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+      file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
+    fi
+    touch $file
+    ;;
+
+  tar)
+    shift
+    if test -n "$run"; then
+      echo 1>&2 "ERROR: \`tar' requires --run"
+      exit 1
+    fi
+
+    # We have already tried tar in the generic part.
+    # Look for gnutar/gtar before invocation to avoid ugly error
+    # messages.
+    if (gnutar --version > /dev/null 2>&1); then
+       gnutar "$@" && exit 0
+    fi
+    if (gtar --version > /dev/null 2>&1); then
+       gtar "$@" && exit 0
+    fi
+    firstarg="$1"
+    if shift; then
+	case "$firstarg" in
+	*o*)
+	    firstarg=`echo "$firstarg" | sed s/o//`
+	    tar "$firstarg" "$@" && exit 0
+	    ;;
+	esac
+	case "$firstarg" in
+	*h*)
+	    firstarg=`echo "$firstarg" | sed s/h//`
+	    tar "$firstarg" "$@" && exit 0
+	    ;;
+	esac
+    fi
+
+    echo 1>&2 "\
+WARNING: I can't seem to be able to run \`tar' with the given arguments.
+         You may want to install GNU tar or Free paxutils, or check the
+         command line arguments."
+    exit 1
+    ;;
+
+  *)
+    echo 1>&2 "\
+WARNING: \`$1' is needed, and you do not seem to have it handy on your
+         system.  You might have modified some files without having the
+         proper tools for further handling them.  Check the \`README' file,
+         it often tells you about the needed prerequirements for installing
+         this package.  You may also peek at any GNU archive site, in case
+         some other package would contain this missing \`$1' program."
+    exit 1
+    ;;
+esac
+
+exit 0
diff --git a/mkinstalldirs b/mkinstalldirs
new file mode 100755
index 0000000..d2d5f21
--- /dev/null
+++ b/mkinstalldirs
@@ -0,0 +1,111 @@
+#! /bin/sh
+# mkinstalldirs --- make directory hierarchy
+# Author: Noah Friedman <friedman@prep.ai.mit.edu>
+# Created: 1993-05-16
+# Public domain
+
+errstatus=0
+dirmode=""
+
+usage="\
+Usage: mkinstalldirs [-h] [--help] [-m mode] dir ..."
+
+# process command line arguments
+while test $# -gt 0 ; do
+  case $1 in
+    -h | --help | --h*)         # -h for help
+      echo "$usage" 1>&2
+      exit 0
+      ;;
+    -m)                         # -m PERM arg
+      shift
+      test $# -eq 0 && { echo "$usage" 1>&2; exit 1; }
+      dirmode=$1
+      shift
+      ;;
+    --)                         # stop option processing
+      shift
+      break
+      ;;
+    -*)                         # unknown option
+      echo "$usage" 1>&2
+      exit 1
+      ;;
+    *)                          # first non-opt arg
+      break
+      ;;
+  esac
+done
+
+for file
+do
+  if test -d "$file"; then
+    shift
+  else
+    break
+  fi
+done
+
+case $# in
+  0) exit 0 ;;
+esac
+
+case $dirmode in
+  '')
+    if mkdir -p -- . 2>/dev/null; then
+      echo "mkdir -p -- $*"
+      exec mkdir -p -- "$@"
+    fi
+    ;;
+  *)
+    if mkdir -m "$dirmode" -p -- . 2>/dev/null; then
+      echo "mkdir -m $dirmode -p -- $*"
+      exec mkdir -m "$dirmode" -p -- "$@"
+    fi
+    ;;
+esac
+
+for file
+do
+  set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
+  shift
+
+  pathcomp=
+  for d
+  do
+    pathcomp="$pathcomp$d"
+    case $pathcomp in
+      -*) pathcomp=./$pathcomp ;;
+    esac
+
+    if test ! -d "$pathcomp"; then
+      echo "mkdir $pathcomp"
+
+      mkdir "$pathcomp" || lasterr=$?
+
+      if test ! -d "$pathcomp"; then
+  	errstatus=$lasterr
+      else
+  	if test ! -z "$dirmode"; then
+	  echo "chmod $dirmode $pathcomp"
+    	  lasterr=""
+  	  chmod "$dirmode" "$pathcomp" || lasterr=$?
+
+  	  if test ! -z "$lasterr"; then
+  	    errstatus=$lasterr
+  	  fi
+  	fi
+      fi
+    fi
+
+    pathcomp="$pathcomp/"
+  done
+done
+
+exit $errstatus
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# End:
+# mkinstalldirs ends here
diff --git a/png.5 b/png.5
index a7455d7..db7c834 100644
--- a/png.5
+++ b/png.5
@@ -1,4 +1,4 @@
-.TH PNG 5 "November 29, 2004"
+.TH PNG 5 "December 3, 2004"
 .SH NAME
 png \- Portable Network Graphics (PNG) format
 .SH DESCRIPTION
diff --git a/png.c b/png.c
index 0ce84b3..608ea2c 100644
--- a/png.c
+++ b/png.c
@@ -1,7 +1,7 @@
 
 /* png.c - location for general purpose libpng functions
  *
- * libpng version 1.2.8rc5 - November 29, 2004
+ * libpng version 1.2.8 - December 3, 2004
  * For conditions of distribution and use, see copyright notice in png.h
  * Copyright (c) 1998-2004 Glenn Randers-Pehrson
  * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)
@@ -13,7 +13,7 @@
 #include "png.h"
 
 /* Generate a compiler error if there is an old png.h in the search path. */
-typedef version_1_2_8rc5 Your_png_h_is_not_version_1_2_8rc5;
+typedef version_1_2_8 Your_png_h_is_not_version_1_2_8;
 
 /* Version information for C files.  This had better match the version
  * string defined in png.h.  */
@@ -680,7 +680,7 @@
 png_get_copyright(png_structp png_ptr)
 {
    if (&png_ptr != NULL)  /* silence compiler warning about unused png_ptr */
-   return ((png_charp) "\n libpng version 1.2.8rc5 - November 29, 2004\n\
+   return ((png_charp) "\n libpng version 1.2.8 - December 3, 2004\n\
    Copyright (c) 1998-2004 Glenn Randers-Pehrson\n\
    Copyright (c) 1996-1997 Andreas Dilger\n\
    Copyright (c) 1995-1996 Guy Eric Schalnat, Group 42, Inc.\n");
diff --git a/png.h b/png.h
index 22db97c..e87a301 100644
--- a/png.h
+++ b/png.h
@@ -1,6 +1,6 @@
 /* png.h - header file for PNG reference library
  *
- * libpng version 1.2.8rc5 - November 29, 2004
+ * libpng version 1.2.8 - December 3, 2004
  * Copyright (c) 1998-2004 Glenn Randers-Pehrson
  * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)
  * (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.)
@@ -8,7 +8,7 @@
  * Authors and maintainers:
  *  libpng versions 0.71, May 1995, through 0.88, January 1996: Guy Schalnat
  *  libpng versions 0.89c, June 1996, through 0.96, May 1997: Andreas Dilger
- *  libpng versions 0.97, January 1998, through 1.2.8rc5 - November 29, 2004: Glenn
+ *  libpng versions 0.97, January 1998, through 1.2.8 - December 3, 2004: Glenn
  *  See also "Contributing Authors", below.
  *
  * Note about libpng version numbers:
@@ -109,6 +109,8 @@
  *    1.2.8beta1-5            13    10208  12.so.0.1.2.8beta1-5
  *    1.0.18rc1-5             10    10018  12.so.0.1.0.18rc1-5
  *    1.2.8rc1-5              13    10208  12.so.0.1.2.8rc1-5
+ *    1.0.18                  10    10018  12.so.0.1.0.18
+ *    1.2.8                   13    10208  12.so.0.1.2.8
  *
  *    Henceforth the source version will match the shared-library major
  *    and minor numbers; the shared-library major version number will be
@@ -138,7 +140,7 @@
  * If you modify libpng you may insert additional notices immediately following
  * this sentence.
  *
- * libpng versions 1.2.6, August 15, 2004, through 1.2.8rc5, November 29, 2004, are
+ * libpng versions 1.2.6, August 15, 2004, through 1.2.8, December 3, 2004, are
  * Copyright (c) 2004 Glenn Randers-Pehrson, and are
  * distributed according to the same disclaimer and license as libpng-1.2.5
  * with the following individual added to the list of Contributing Authors:
@@ -250,13 +252,13 @@
  * Y2K compliance in libpng:
  * =========================
  *
- *    November 29, 2004
+ *    December 3, 2004
  *
  *    Since the PNG Development group is an ad-hoc body, we can't make
  *    an official declaration.
  *
  *    This is your unofficial assurance that libpng from version 0.71 and
- *    upward through 1.2.8rc5 are Y2K compliant.  It is my belief that earlier
+ *    upward through 1.2.8 are Y2K compliant.  It is my belief that earlier
  *    versions were also Y2K compliant.
  *
  *    Libpng only has three year fields.  One is a 2-byte unsigned integer
@@ -312,9 +314,9 @@
  */
 
 /* Version information for png.h - this should match the version in png.c */
-#define PNG_LIBPNG_VER_STRING "1.2.8rc5"
+#define PNG_LIBPNG_VER_STRING "1.2.8"
 #define PNG_HEADER_VERSION_STRING \
-   " libpng version 1.2.8rc5 - November 29, 2004 (header)\n"
+   " libpng version 1.2.8 - December 3, 2004 (header)\n"
 
 #define PNG_LIBPNG_VER_SONUM   0
 #define PNG_LIBPNG_VER_DLLNUM  13
@@ -326,7 +328,7 @@
 /* This should match the numeric part of the final component of
  * PNG_LIBPNG_VER_STRING, omitting any leading zero: */
 
-#define PNG_LIBPNG_VER_BUILD  5
+#define PNG_LIBPNG_VER_BUILD  0
 
 /* Release Status */
 #define PNG_LIBPNG_BUILD_ALPHA    1
@@ -343,7 +345,7 @@
 #define PNG_LIBPNG_BUILD_SPECIAL 32 /* Cannot be OR'ed with
                                        PNG_LIBPNG_BUILD_PRIVATE */
 
-#define PNG_LIBPNG_BUILD_BASE_TYPE PNG_LIBPNG_BUILD_RC
+#define PNG_LIBPNG_BUILD_BASE_TYPE PNG_LIBPNG_BUILD_STABLE
 
 /* Careful here.  At one time, Guy wanted to use 082, but that would be octal.
  * We must not include leading zeros.
@@ -1354,7 +1356,7 @@
 /* This triggers a compiler error in png.c, if png.c and png.h
  * do not agree upon the version number.
  */
-typedef png_structp version_1_2_8rc5;
+typedef png_structp version_1_2_8;
 
 typedef png_struct FAR * FAR * png_structpp;
 
diff --git a/pngconf.h b/pngconf.h
index ccf6d04..ba50838 100644
--- a/pngconf.h
+++ b/pngconf.h
@@ -1,7 +1,7 @@
 
 /* pngconf.h - machine configurable file for libpng
  *
- * libpng version 1.2.8rc5 - November 29, 2004
+ * libpng version 1.2.8 - December 3, 2004
  * For conditions of distribution and use, see copyright notice in png.h
  * Copyright (c) 1998-2004 Glenn Randers-Pehrson
  * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)
diff --git a/pngerror.c b/pngerror.c
index 234dfbe..6fa4012 100644
--- a/pngerror.c
+++ b/pngerror.c
@@ -1,7 +1,7 @@
 
 /* pngerror.c - stub functions for i/o and memory allocation
  *
- * libpng version 1.2.8rc5 - November 29, 2004
+ * libpng version 1.2.8 - December 3, 2004
  * For conditions of distribution and use, see copyright notice in png.h
  * Copyright (c) 1998-2004 Glenn Randers-Pehrson
  * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)
diff --git a/pnggccrd.c b/pnggccrd.c
index dffe7c2..248e1b3 100644
--- a/pnggccrd.c
+++ b/pnggccrd.c
@@ -6,7 +6,7 @@
  *     and http://www.intel.com/drg/pentiumII/appnotes/923/923.htm
  *     for Intel's performance analysis of the MMX vs. non-MMX code.
  *
- * libpng version 1.2.8rc5 - November 29, 2004
+ * libpng version 1.2.8 - December 3, 2004
  * For conditions of distribution and use, see copyright notice in png.h
  * Copyright (c) 1998-2004 Glenn Randers-Pehrson
  * Copyright (c) 1998, Intel Corporation
diff --git a/pngget.c b/pngget.c
index 0dfb414..8eefa77 100644
--- a/pngget.c
+++ b/pngget.c
@@ -1,7 +1,7 @@
 
 /* pngget.c - retrieval of values from info struct
  *
- * libpng 1.2.8rc5 - November 29, 2004
+ * libpng 1.2.8 - December 3, 2004
  * For conditions of distribution and use, see copyright notice in png.h
  * Copyright (c) 1998-2004 Glenn Randers-Pehrson
  * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)
diff --git a/pngmem.c b/pngmem.c
index d7a96f2..f1cb693 100644
--- a/pngmem.c
+++ b/pngmem.c
@@ -1,7 +1,7 @@
 
 /* pngmem.c - stub functions for memory allocation
  *
- * libpng version 1.2.8rc5 - November 29, 2004
+ * libpng version 1.2.8 - December 3, 2004
  * For conditions of distribution and use, see copyright notice in png.h
  * Copyright (c) 1998-2004 Glenn Randers-Pehrson
  * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)
diff --git a/pngpread.c b/pngpread.c
index 354cec5..8c35faa 100644
--- a/pngpread.c
+++ b/pngpread.c
@@ -1,7 +1,7 @@
 
 /* pngpread.c - read a png file in push mode
  *
- * libpng version 1.2.8rc5 - November 29, 2004
+ * libpng version 1.2.8 - December 3, 2004
  * For conditions of distribution and use, see copyright notice in png.h
  * Copyright (c) 1998-2004 Glenn Randers-Pehrson
  * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)
diff --git a/pngread.c b/pngread.c
index 74f8573..5924333 100644
--- a/pngread.c
+++ b/pngread.c
@@ -1,7 +1,7 @@
 
 /* pngread.c - read a PNG file
  *
- * libpng 1.2.8rc5 - November 29, 2004
+ * libpng 1.2.8 - December 3, 2004
  * For conditions of distribution and use, see copyright notice in png.h
  * Copyright (c) 1998-2004 Glenn Randers-Pehrson
  * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)
@@ -806,7 +806,7 @@
  * not called png_set_interlace_handling(), the display_row buffer will
  * be ignored, so pass NULL to it.
  *
- * [*] png_handle_alpha() does not exist yet, as of libpng version 1.2.8rc5
+ * [*] png_handle_alpha() does not exist yet, as of libpng version 1.2.8
  */
 
 void PNGAPI
@@ -856,7 +856,7 @@
  * only call this function once.  If you desire to have an image for
  * each pass of a interlaced image, use png_read_rows() instead.
  *
- * [*] png_handle_alpha() does not exist yet, as of libpng version 1.2.8rc5
+ * [*] png_handle_alpha() does not exist yet, as of libpng version 1.2.8
  */
 void PNGAPI
 png_read_image(png_structp png_ptr, png_bytepp image)
diff --git a/pngrio.c b/pngrio.c
index 2d175e5..cae501a 100644
--- a/pngrio.c
+++ b/pngrio.c
@@ -1,7 +1,7 @@
 
 /* pngrio.c - functions for data input
  *
- * libpng 1.2.8rc5 - November 29, 2004
+ * libpng 1.2.8 - December 3, 2004
  * For conditions of distribution and use, see copyright notice in png.h
  * Copyright (c) 1998-2004 Glenn Randers-Pehrson
  * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)
diff --git a/pngrtran.c b/pngrtran.c
index bfb7d1b..e1d6e3c 100644
--- a/pngrtran.c
+++ b/pngrtran.c
@@ -1,7 +1,7 @@
 
 /* pngrtran.c - transforms the data in a row for PNG readers
  *
- * libpng version  1.2.8rc5 - November 29, 2004
+ * libpng version  1.2.8 - December 3, 2004
  * For conditions of distribution and use, see copyright notice in png.h
  * Copyright (c) 1998-2004 Glenn Randers-Pehrson
  * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)
diff --git a/pngrutil.c b/pngrutil.c
index e560dc3..99e466f 100644
--- a/pngrutil.c
+++ b/pngrutil.c
@@ -1,6 +1,6 @@
 /* pngrutil.c - utilities to read a PNG file
  *
- * libpng version 1.2.8rc5 - November 29, 2004
+ * libpng version 1.2.8 - December 3, 2004
  * For conditions of distribution and use, see copyright notice in png.h
  * Copyright (c) 1998-2004 Glenn Randers-Pehrson
  * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)
diff --git a/pngset.c b/pngset.c
index 15fd678..5922cad 100644
--- a/pngset.c
+++ b/pngset.c
@@ -1,7 +1,7 @@
 
 /* pngset.c - storage of image information into info struct
  *
- * libpng 1.2.8rc5 - November 29, 2004
+ * libpng 1.2.8 - December 3, 2004
  * For conditions of distribution and use, see copyright notice in png.h
  * Copyright (c) 1998-2004 Glenn Randers-Pehrson
  * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)
diff --git a/pngtest.c b/pngtest.c
index cc9bb9b..f2085e1 100644
--- a/pngtest.c
+++ b/pngtest.c
@@ -1,7 +1,7 @@
 
 /* pngtest.c - a simple test program to test libpng
  *
- * libpng 1.2.8rc5 - November 29, 2004
+ * libpng 1.2.8 - December 3, 2004
  * For conditions of distribution and use, see copyright notice in png.h
  * Copyright (c) 1998-2004 Glenn Randers-Pehrson
  * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)
@@ -1551,4 +1551,4 @@
 }
 
 /* Generate a compiler error if there is an old png.h in the search path. */
-typedef version_1_2_8rc5 your_png_h_is_not_version_1_2_8rc5;
+typedef version_1_2_8 your_png_h_is_not_version_1_2_8;
diff --git a/pngtrans.c b/pngtrans.c
index 737189e..9003a21 100644
--- a/pngtrans.c
+++ b/pngtrans.c
@@ -1,7 +1,7 @@
 
 /* pngtrans.c - transforms the data in a row (used by both readers and writers)
  *
- * libpng  1.2.8rc5 - November 29, 2004
+ * libpng  1.2.8 - December 3, 2004
  * For conditions of distribution and use, see copyright notice in png.h
  * Copyright (c) 1998-2004 Glenn Randers-Pehrson
  * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)
diff --git a/pngvcrd.c b/pngvcrd.c
index 9e19fae..940a7fc 100644
--- a/pngvcrd.c
+++ b/pngvcrd.c
@@ -2,7 +2,7 @@
  *
  * For Intel x86 CPU and Microsoft Visual C++ compiler
  *
- * libpng version 1.2.8rc5 - November 29, 2004
+ * libpng version 1.2.8 - December 3, 2004
  * For conditions of distribution and use, see copyright notice in png.h
  * Copyright (c) 1998-2004 Glenn Randers-Pehrson
  * Copyright (c) 1998, Intel Corporation
diff --git a/pngwio.c b/pngwio.c
index 5c7281f..d5d61f4 100644
--- a/pngwio.c
+++ b/pngwio.c
@@ -1,7 +1,7 @@
 
 /* pngwio.c - functions for data output
  *
- * libpng 1.2.8rc5 - November 29, 2004
+ * libpng 1.2.8 - December 3, 2004
  * For conditions of distribution and use, see copyright notice in png.h
  * Copyright (c) 1998-2004 Glenn Randers-Pehrson
  * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)
diff --git a/pngwrite.c b/pngwrite.c
index 7460ca1..3246fda 100644
--- a/pngwrite.c
+++ b/pngwrite.c
@@ -1,7 +1,7 @@
 
 /* pngwrite.c - general routines to write a PNG file
  *
- * libpng 1.2.8rc5 - November 29, 2004
+ * libpng 1.2.8 - December 3, 2004
  * For conditions of distribution and use, see copyright notice in png.h
  * Copyright (c) 1998-2004 Glenn Randers-Pehrson
  * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)
diff --git a/pngwtran.c b/pngwtran.c
index a1d0484..f1c8b3e 100644
--- a/pngwtran.c
+++ b/pngwtran.c
@@ -1,7 +1,7 @@
 
 /* pngwtran.c - transforms the data in a row for PNG writers
  *
- * libpng version 1.2.8rc5 - November 29, 2004
+ * libpng version 1.2.8 - December 3, 2004
  * For conditions of distribution and use, see copyright notice in png.h
  * Copyright (c) 1998-2004 Glenn Randers-Pehrson
  * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)
diff --git a/pngwutil.c b/pngwutil.c
index c61373a..dd7b150 100644
--- a/pngwutil.c
+++ b/pngwutil.c
@@ -1,7 +1,7 @@
 
 /* pngwutil.c - utilities to write a PNG file
  *
- * libpng version 1.2.8rc5 - November 29, 2004
+ * libpng version 1.2.8 - December 3, 2004
  * For conditions of distribution and use, see copyright notice in png.h
  * Copyright (c) 1998-2004 Glenn Randers-Pehrson
  * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)
diff --git a/projects/visualc7/PRJ0041.mak b/projects/visualc71/PRJ0041.mak
similarity index 100%
rename from projects/visualc7/PRJ0041.mak
rename to projects/visualc71/PRJ0041.mak
diff --git a/projects/visualc7/README.txt b/projects/visualc71/README.txt
similarity index 91%
rename from projects/visualc7/README.txt
rename to projects/visualc71/README.txt
index 9a6aa99..7bd6332 100644
--- a/projects/visualc7/README.txt
+++ b/projects/visualc71/README.txt
@@ -6,7 +6,9 @@
 Assumptions:
 * The libpng source files are in ..\..
 * The zlib source files are in ..\..\..\zlib
-* The zlib project files are in ..\..\..\zlib\projects\visualc7
+* The zlib project file is in . /* Warning: This is until the zlib project
+  files get intergrated into the next zlib release. The final zlib project
+  directory will then be ..\..\..\zlib\projects\visualc71. */
 
 To use:
 
diff --git a/projects/visualc71/README_zlib.txt b/projects/visualc71/README_zlib.txt
new file mode 100644
index 0000000..ff6a5c7
--- /dev/null
+++ b/projects/visualc71/README_zlib.txt
@@ -0,0 +1,44 @@
+/* WARNING: This file was put in the LibPNG distribution for convenience only.
+            It is expected to be part of the next zlib release under
+            "projects\visualc71\README.txt." */
+
+Microsoft Developer Studio Project File, Format Version 7.10 for zlib.
+
+Copyright (C) 2004 Simon-Pierre Cadieux.
+Copyright (C) 2004 Cosmin Truta.
+For conditions of distribution and use, see copyright notice in zlib.h.
+
+
+To use:
+
+1) On the main menu, select "File | Open Solution".
+   Open "zlib.sln".
+
+2) Display the Solution Explorer view (Ctrl+Alt+L)
+
+3) Set one of the project as the StartUp project. If you just want to build the
+   binaries set "zlib" as the startup project (Select "zlib" tree view item +
+   Project | Set as StartUp project). If you want to build and test the
+   binaries set it to "example" (Select "example" tree view item + Project |
+   Set as StartUp project), If you want to build the minigzip utility set it to
+   "minigzip" (Select "minigzip" tree view item + Project | Set as StartUp
+   project
+
+4) Select "Build | Configuration Manager...".
+   Choose the configuration you wish to build.
+
+5) Select "Build | Clean Solution".
+
+6) Select "Build | Build Solution (Ctrl-Shift-B)"
+
+This project builds the zlib binaries as follows:
+
+* Win32_DLL_Release\zlib1.dll       DLL build
+* Win32_DLL_Debug\zlib1d.dll        DLL build (debug version)
+* Win32_DLL_ASM_Release\zlib1.dll   DLL build using ASM code
+* Win32_DLL_ASM_Debug\zlib1d.dll    DLL build using ASM code (debug version)
+* Win32_LIB_Release\zlib.lib        static build
+* Win32_LIB_Debug\zlibd.lib         static build (debug version)
+* Win32_LIB_ASM_Release\zlib.lib    static build using ASM code
+* Win32_LIB_ASM_Debug\zlibd.lib     static build using ASM code (debug version)
+
diff --git a/projects/visualc7/libpng.sln b/projects/visualc71/libpng.sln
similarity index 97%
rename from projects/visualc7/libpng.sln
rename to projects/visualc71/libpng.sln
index fea9aff..d49277e 100644
--- a/projects/visualc7/libpng.sln
+++ b/projects/visualc71/libpng.sln
@@ -9,7 +9,7 @@
 		{0008960E-E0DD-41A6-8265-00B31DDB4C21} = {0008960E-E0DD-41A6-8265-00B31DDB4C21}
 	EndProjectSection
 EndProject
-Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "zlib", "..\..\..\zlib\projects\visualc7\zlib.vcproj", "{2D4F8105-7D21-454C-9932-B47CAB71A5C0}"
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "zlib", "zlib.vcproj", "{2D4F8105-7D21-454C-9932-B47CAB71A5C0}"
 	ProjectSection(ProjectDependencies) = postProject
 	EndProjectSection
 EndProject
diff --git a/projects/visualc7/libpng.vcproj b/projects/visualc71/libpng.vcproj
similarity index 100%
rename from projects/visualc7/libpng.vcproj
rename to projects/visualc71/libpng.vcproj
diff --git a/projects/visualc7/pngtest.vcproj b/projects/visualc71/pngtest.vcproj
similarity index 88%
rename from projects/visualc7/pngtest.vcproj
rename to projects/visualc71/pngtest.vcproj
index e0e87fa..e7a2927 100644
--- a/projects/visualc7/pngtest.vcproj
+++ b/projects/visualc71/pngtest.vcproj
@@ -2,7 +2,8 @@
 <VisualStudioProject
 	ProjectType="Visual C++"
 	Version="7.10"
-	Name="pngtest">
+	Name="pngtest"
+	RootNamespace="pngtest">
 	<Platforms>
 		<Platform
 			Name="Win32"/>
@@ -26,9 +27,9 @@
 			<Tool
 				Name="VCCustomBuildTool"
 				Description="Testing..."
-				CommandLine="set path=$(OutDir)\..;..\..\..\zlib\projects\visualc7\$(OutDir)\..
-$(OutDir)\pngtest.exe ..\..\pngtest.png"
-				Outputs="pngout.png"/>
+				CommandLine="set path=$(OutDir)\..;$(OutDir)\..\ZLib
+$(TargetPath) ..\..\pngtest.png $(IntDir)\pngout.png"
+				Outputs="$(IntDir)\pngout.png"/>
 			<Tool
 				Name="VCLinkerTool"
 				OutputFile="$(OutDir)/pngtest.exe"
@@ -73,9 +74,9 @@
 			<Tool
 				Name="VCCustomBuildTool"
 				Description="Testing..."
-				CommandLine="set path=$(OutDir)\..;..\..\..\zlib\projects\visualc7\$(OutDir)\..
-$(OutDir)\pngtest.exe ..\..\pngtest.png"
-				Outputs="pngout.png"/>
+				CommandLine="set path=$(OutDir)\..;$(OutDir)\..\ZLib
+$(TargetPath) ..\..\pngtest.png $(IntDir)\pngout.png"
+				Outputs="$(IntDir)\pngout.png"/>
 			<Tool
 				Name="VCLinkerTool"
 				OutputFile="$(OutDir)/pngtest.exe"
@@ -121,9 +122,9 @@
 			<Tool
 				Name="VCCustomBuildTool"
 				Description="Testing..."
-				CommandLine="set path=$(OutDir)\..;..\..\..\zlib\projects\visualc7\$(OutDir)\..
-$(OutDir)\pngtest.exe ..\..\pngtest.png"
-				Outputs="pngout.png"/>
+				CommandLine="set path=$(OutDir)\..;$(OutDir)\..\ZLib
+$(TargetPath) ..\..\pngtest.png $(IntDir)\pngout.png"
+				Outputs="$(IntDir)\pngout.png"/>
 			<Tool
 				Name="VCLinkerTool"
 				OutputFile="$(OutDir)/pngtest.exe"
@@ -169,9 +170,9 @@
 			<Tool
 				Name="VCCustomBuildTool"
 				Description="Testing..."
-				CommandLine="set path=$(OutDir)\..;..\..\..\zlib\projects\visualc7\$(OutDir)\..
-$(OutDir)\pngtest.exe ..\..\pngtest.png"
-				Outputs="pngout.png"/>
+				CommandLine="set path=$(OutDir)\..;$(OutDir)\..\ZLib
+$(TargetPath) ..\..\pngtest.png $(IntDir)\pngout.png"
+				Outputs="$(IntDir)\pngout.png"/>
 			<Tool
 				Name="VCLinkerTool"
 				OutputFile="$(OutDir)/pngtest.exe"
@@ -218,9 +219,9 @@
 			<Tool
 				Name="VCCustomBuildTool"
 				Description="Testing..."
-				CommandLine="set path=$(OutDir)\..;..\..\..\zlib\projects\visualc7\Win32_DLL_Release
-$(OutDir)\pngtest.exe ..\..\pngtest.png"
-				Outputs="pngout.png"/>
+				CommandLine="set path=$(OutDir)\..;$(OutDir)\..\..\Win32_DLL_Release\ZLib
+$(TargetPath) ..\..\pngtest.png $(IntDir)\pngout.png"
+				Outputs="$(IntDir)\pngout.png"/>
 			<Tool
 				Name="VCLinkerTool"
 				OutputFile="$(OutDir)/pngtest.exe"
@@ -267,9 +268,9 @@
 			<Tool
 				Name="VCCustomBuildTool"
 				Description="Testing..."
-				CommandLine="set path=$(OutDir)\..;..\..\..\zlib\projects\visualc7\$(OutDir)\..
-$(OutDir)\pngtest.exe ..\..\pngtest.png"
-				Outputs="pngout.png"/>
+				CommandLine="set path=$(OutDir)\..;$(OutDir)\..\ZLib
+$(TargetPath) ..\..\pngtest.png $(IntDir)\pngout.png"
+				Outputs="$(IntDir)\pngout.png"/>
 			<Tool
 				Name="VCLinkerTool"
 				OutputFile="$(OutDir)/pngtest.exe"
@@ -315,9 +316,9 @@
 			<Tool
 				Name="VCCustomBuildTool"
 				Description="Testing..."
-				CommandLine="set path=$(OutDir)\..;..\..\..\zlib\projects\visualc7\$(OutDir)\..
-$(OutDir)\pngtest.exe ..\..\pngtest.png"
-				Outputs="pngout.png"/>
+				CommandLine="set path=$(OutDir)\..;$(OutDir)\..\ZLib
+$(TargetPath) ..\..\pngtest.png $(IntDir)\pngout.png"
+				Outputs="$(IntDir)\pngout.png"/>
 			<Tool
 				Name="VCLinkerTool"
 				OutputFile="$(OutDir)/pngtest.exe"
@@ -363,9 +364,9 @@
 			<Tool
 				Name="VCCustomBuildTool"
 				Description="Testing..."
-				CommandLine="set path=$(OutDir)\..;..\..\..\zlib\projects\visualc7\$(OutDir)\..
-$(OutDir)\pngtest.exe ..\..\pngtest.png"
-				Outputs="pngout.png"/>
+				CommandLine="set path=$(OutDir)\..;$(OutDir)\..\ZLib
+$(TargetPath) ..\..\pngtest.png $(IntDir)\pngout.png"
+				Outputs="$(IntDir)\pngout.png"/>
 			<Tool
 				Name="VCLinkerTool"
 				OutputFile="$(OutDir)/pngtest.exe"
@@ -411,9 +412,9 @@
 			<Tool
 				Name="VCCustomBuildTool"
 				Description="Testing..."
-				CommandLine="set path=$(OutDir)\..;..\..\..\zlib\projects\visualc7\$(OutDir)\..
-$(OutDir)\pngtest.exe ..\..\pngtest.png"
-				Outputs="pngout.png"/>
+				CommandLine="set path=$(OutDir)\..;$(OutDir)\..\ZLib
+$(TargetPath) ..\..\pngtest.png $(IntDir)\pngout.png"
+				Outputs="$(IntDir)\pngout.png"/>
 			<Tool
 				Name="VCLinkerTool"
 				OutputFile="$(OutDir)/pngtest.exe"
diff --git a/projects/visualc71/zlib.vcproj b/projects/visualc71/zlib.vcproj
new file mode 100644
index 0000000..5574ae3
--- /dev/null
+++ b/projects/visualc71/zlib.vcproj
@@ -0,0 +1,670 @@
+<?xml version="1.0" encoding="Windows-1252"?>
+<VisualStudioProject
+	ProjectType="Visual C++"
+	Version="7.10"
+	Name="zlib">
+	<Platforms>
+		<Platform
+			Name="Win32"/>
+	</Platforms>
+	<Configurations>
+		<Configuration
+			Name="DLL Release|Win32"
+			OutputDirectory=".\Win32_DLL_Release\ZLib"
+			IntermediateDirectory=".\Win32_DLL_Release\ZLib"
+			ConfigurationType="2">
+			<Tool
+				Name="VCCLCompilerTool"
+				InlineFunctionExpansion="1"
+				AdditionalIncludeDirectories="..\..\..\zlib"
+				PreprocessorDefinitions="WIN32;NDEBUG"
+				StringPooling="TRUE"
+				RuntimeLibrary="2"
+				EnableFunctionLevelLinking="TRUE"
+				WarningLevel="3"
+				CompileAs="1"/>
+			<Tool
+				Name="VCCustomBuildTool"/>
+			<Tool
+				Name="VCLinkerTool"
+				OutputFile="$(OutDir)\zlib1.dll"
+				LinkIncremental="1"
+				ModuleDefinitionFile="..\..\..\zlib\win32\zlib.def"/>
+			<Tool
+				Name="VCMIDLTool"/>
+			<Tool
+				Name="VCPostBuildEventTool"/>
+			<Tool
+				Name="VCPreBuildEventTool"/>
+			<Tool
+				Name="VCPreLinkEventTool"/>
+			<Tool
+				Name="VCResourceCompilerTool"
+				PreprocessorDefinitions="NDEBUG"
+				Culture="1033"/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"/>
+			<Tool
+				Name="VCWebDeploymentTool"/>
+			<Tool
+				Name="VCManagedWrapperGeneratorTool"/>
+			<Tool
+				Name="VCAuxiliaryManagedWrapperGeneratorTool"/>
+		</Configuration>
+		<Configuration
+			Name="DLL Debug|Win32"
+			OutputDirectory=".\Win32_DLL_Debug\ZLib"
+			IntermediateDirectory=".\Win32_DLL_Debug\ZLib"
+			ConfigurationType="2">
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="0"
+				AdditionalIncludeDirectories="..\..\..\zlib"
+				PreprocessorDefinitions="WIN32;_DEBUG"
+				BasicRuntimeChecks="3"
+				RuntimeLibrary="3"
+				WarningLevel="3"
+				DebugInformationFormat="4"
+				CompileAs="1"/>
+			<Tool
+				Name="VCCustomBuildTool"/>
+			<Tool
+				Name="VCLinkerTool"
+				OutputFile="$(OutDir)\zlib1d.dll"
+				ModuleDefinitionFile="..\..\..\zlib\win32\zlib.def"
+				GenerateDebugInformation="TRUE"/>
+			<Tool
+				Name="VCMIDLTool"/>
+			<Tool
+				Name="VCPostBuildEventTool"/>
+			<Tool
+				Name="VCPreBuildEventTool"/>
+			<Tool
+				Name="VCPreLinkEventTool"/>
+			<Tool
+				Name="VCResourceCompilerTool"
+				PreprocessorDefinitions="_DEBUG"
+				Culture="1033"/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"/>
+			<Tool
+				Name="VCWebDeploymentTool"/>
+			<Tool
+				Name="VCManagedWrapperGeneratorTool"/>
+			<Tool
+				Name="VCAuxiliaryManagedWrapperGeneratorTool"/>
+		</Configuration>
+		<Configuration
+			Name="DLL ASM Release|Win32"
+			OutputDirectory=".\Win32_DLL_ASM_Release\ZLib"
+			IntermediateDirectory=".\Win32_DLL_ASM_Release\ZLib"
+			ConfigurationType="2">
+			<Tool
+				Name="VCCLCompilerTool"
+				InlineFunctionExpansion="1"
+				AdditionalIncludeDirectories="..\..\..\zlib"
+				PreprocessorDefinitions="WIN32;NDEBUG;ASMV;ASMINF"
+				StringPooling="TRUE"
+				RuntimeLibrary="2"
+				EnableFunctionLevelLinking="TRUE"
+				WarningLevel="3"
+				CompileAs="1"/>
+			<Tool
+				Name="VCCustomBuildTool"/>
+			<Tool
+				Name="VCLinkerTool"
+				OutputFile="$(OutDir)\zlib1.dll"
+				LinkIncremental="1"
+				ModuleDefinitionFile="..\..\..\zlib\win32\zlib.def"/>
+			<Tool
+				Name="VCMIDLTool"/>
+			<Tool
+				Name="VCPostBuildEventTool"/>
+			<Tool
+				Name="VCPreBuildEventTool"/>
+			<Tool
+				Name="VCPreLinkEventTool"/>
+			<Tool
+				Name="VCResourceCompilerTool"
+				PreprocessorDefinitions="NDEBUG"
+				Culture="1033"/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"/>
+			<Tool
+				Name="VCWebDeploymentTool"/>
+			<Tool
+				Name="VCManagedWrapperGeneratorTool"/>
+			<Tool
+				Name="VCAuxiliaryManagedWrapperGeneratorTool"/>
+		</Configuration>
+		<Configuration
+			Name="DLL ASM Debug|Win32"
+			OutputDirectory=".\Win32_DLL_ASM_Debug\ZLib"
+			IntermediateDirectory=".\Win32_DLL_ASM_Debug\ZLib"
+			ConfigurationType="2">
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="0"
+				AdditionalIncludeDirectories="..\..\..\zlib"
+				PreprocessorDefinitions="WIN32;_DEBUG;ASMV;ASMINF"
+				BasicRuntimeChecks="3"
+				RuntimeLibrary="3"
+				WarningLevel="3"
+				DebugInformationFormat="4"
+				CompileAs="1"/>
+			<Tool
+				Name="VCCustomBuildTool"/>
+			<Tool
+				Name="VCLinkerTool"
+				OutputFile="$(OutDir)\zlib1d.dll"
+				ModuleDefinitionFile="..\..\..\zlib\win32\zlib.def"
+				GenerateDebugInformation="TRUE"/>
+			<Tool
+				Name="VCMIDLTool"/>
+			<Tool
+				Name="VCPostBuildEventTool"/>
+			<Tool
+				Name="VCPreBuildEventTool"/>
+			<Tool
+				Name="VCPreLinkEventTool"/>
+			<Tool
+				Name="VCResourceCompilerTool"
+				PreprocessorDefinitions="_DEBUG"
+				Culture="1033"/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"/>
+			<Tool
+				Name="VCWebDeploymentTool"/>
+			<Tool
+				Name="VCManagedWrapperGeneratorTool"/>
+			<Tool
+				Name="VCAuxiliaryManagedWrapperGeneratorTool"/>
+		</Configuration>
+		<Configuration
+			Name="LIB Release|Win32"
+			OutputDirectory=".\Win32_LIB_Release\ZLib"
+			IntermediateDirectory=".\Win32_LIB_Release\ZLib"
+			ConfigurationType="4">
+			<Tool
+				Name="VCCLCompilerTool"
+				InlineFunctionExpansion="1"
+				AdditionalIncludeDirectories="..\..\..\zlib"
+				PreprocessorDefinitions="WIN32;NDEBUG"
+				StringPooling="TRUE"
+				RuntimeLibrary="2"
+				EnableFunctionLevelLinking="TRUE"
+				WarningLevel="3"
+				CompileAs="1"/>
+			<Tool
+				Name="VCCustomBuildTool"/>
+			<Tool
+				Name="VCLibrarianTool"
+				OutputFile="$(OutDir)\zlib.lib"/>
+			<Tool
+				Name="VCMIDLTool"/>
+			<Tool
+				Name="VCPostBuildEventTool"/>
+			<Tool
+				Name="VCPreBuildEventTool"/>
+			<Tool
+				Name="VCPreLinkEventTool"/>
+			<Tool
+				Name="VCResourceCompilerTool"/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"/>
+			<Tool
+				Name="VCManagedWrapperGeneratorTool"/>
+			<Tool
+				Name="VCAuxiliaryManagedWrapperGeneratorTool"/>
+		</Configuration>
+		<Configuration
+			Name="LIB Debug|Win32"
+			OutputDirectory=".\Win32_LIB_Debug\ZLib"
+			IntermediateDirectory=".\Win32_LIB_Debug\ZLib"
+			ConfigurationType="4">
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="0"
+				AdditionalIncludeDirectories="..\..\..\zlib"
+				PreprocessorDefinitions="WIN32;_DEBUG"
+				BasicRuntimeChecks="3"
+				RuntimeLibrary="3"
+				WarningLevel="3"
+				DebugInformationFormat="4"
+				CompileAs="1"/>
+			<Tool
+				Name="VCCustomBuildTool"/>
+			<Tool
+				Name="VCLibrarianTool"
+				OutputFile="$(OutDir)\zlibd.lib"/>
+			<Tool
+				Name="VCMIDLTool"/>
+			<Tool
+				Name="VCPostBuildEventTool"/>
+			<Tool
+				Name="VCPreBuildEventTool"/>
+			<Tool
+				Name="VCPreLinkEventTool"/>
+			<Tool
+				Name="VCResourceCompilerTool"/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"/>
+			<Tool
+				Name="VCManagedWrapperGeneratorTool"/>
+			<Tool
+				Name="VCAuxiliaryManagedWrapperGeneratorTool"/>
+		</Configuration>
+		<Configuration
+			Name="LIB ASM Release|Win32"
+			OutputDirectory=".\Win32_LIB_ASM_Release\ZLib"
+			IntermediateDirectory=".\Win32_LIB_ASM_Release\ZLib"
+			ConfigurationType="4">
+			<Tool
+				Name="VCCLCompilerTool"
+				InlineFunctionExpansion="1"
+				AdditionalIncludeDirectories="..\..\..\zlib"
+				PreprocessorDefinitions="WIN32;NDEBUG;ASMV;ASMINF"
+				StringPooling="TRUE"
+				RuntimeLibrary="2"
+				EnableFunctionLevelLinking="TRUE"
+				WarningLevel="3"
+				CompileAs="1"/>
+			<Tool
+				Name="VCCustomBuildTool"/>
+			<Tool
+				Name="VCLibrarianTool"
+				OutputFile="$(OutDir)\zlib.lib"/>
+			<Tool
+				Name="VCMIDLTool"/>
+			<Tool
+				Name="VCPostBuildEventTool"/>
+			<Tool
+				Name="VCPreBuildEventTool"/>
+			<Tool
+				Name="VCPreLinkEventTool"/>
+			<Tool
+				Name="VCResourceCompilerTool"/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"/>
+			<Tool
+				Name="VCManagedWrapperGeneratorTool"/>
+			<Tool
+				Name="VCAuxiliaryManagedWrapperGeneratorTool"/>
+		</Configuration>
+		<Configuration
+			Name="LIB ASM Debug|Win32"
+			OutputDirectory=".\Win32_LIB_ASM_Debug\ZLib"
+			IntermediateDirectory=".\Win32_LIB_ASM_Debug\ZLib"
+			ConfigurationType="4">
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="0"
+				AdditionalIncludeDirectories="..\..\..\zlib"
+				PreprocessorDefinitions="WIN32;_DEBUG;ASMV;ASMINF"
+				BasicRuntimeChecks="3"
+				RuntimeLibrary="3"
+				WarningLevel="3"
+				DebugInformationFormat="4"
+				CompileAs="1"/>
+			<Tool
+				Name="VCCustomBuildTool"/>
+			<Tool
+				Name="VCLibrarianTool"
+				OutputFile="$(OutDir)\zlibd.lib"/>
+			<Tool
+				Name="VCMIDLTool"/>
+			<Tool
+				Name="VCPostBuildEventTool"/>
+			<Tool
+				Name="VCPreBuildEventTool"/>
+			<Tool
+				Name="VCPreLinkEventTool"/>
+			<Tool
+				Name="VCResourceCompilerTool"/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"/>
+			<Tool
+				Name="VCManagedWrapperGeneratorTool"/>
+			<Tool
+				Name="VCAuxiliaryManagedWrapperGeneratorTool"/>
+		</Configuration>
+	</Configurations>
+	<References>
+	</References>
+	<Files>
+		<Filter
+			Name="Source Files"
+			Filter="cpp;c;cxx;rc;def;r;odl;idl;hpj;bat">
+			<File
+				RelativePath="..\..\..\zlib\adler32.c">
+			</File>
+			<File
+				RelativePath="..\..\..\zlib\compress.c">
+			</File>
+			<File
+				RelativePath="..\..\..\zlib\crc32.c">
+			</File>
+			<File
+				RelativePath="..\..\..\zlib\deflate.c">
+			</File>
+			<File
+				RelativePath="..\..\..\zlib\gzio.c">
+			</File>
+			<File
+				RelativePath="..\..\..\zlib\infback.c">
+			</File>
+			<File
+				RelativePath="..\..\..\zlib\inffast.c">
+			</File>
+			<File
+				RelativePath="..\..\..\zlib\inflate.c">
+			</File>
+			<File
+				RelativePath="..\..\..\zlib\inftrees.c">
+			</File>
+			<File
+				RelativePath="..\..\..\zlib\trees.c">
+			</File>
+			<File
+				RelativePath="..\..\..\zlib\uncompr.c">
+			</File>
+			<File
+				RelativePath="..\..\..\zlib\win32\zlib.def">
+				<FileConfiguration
+					Name="LIB Release|Win32"
+					ExcludedFromBuild="TRUE">
+					<Tool
+						Name="VCCustomBuildTool"/>
+				</FileConfiguration>
+				<FileConfiguration
+					Name="LIB Debug|Win32"
+					ExcludedFromBuild="TRUE">
+					<Tool
+						Name="VCCustomBuildTool"/>
+				</FileConfiguration>
+				<FileConfiguration
+					Name="LIB ASM Release|Win32"
+					ExcludedFromBuild="TRUE">
+					<Tool
+						Name="VCCustomBuildTool"/>
+				</FileConfiguration>
+				<FileConfiguration
+					Name="LIB ASM Debug|Win32"
+					ExcludedFromBuild="TRUE">
+					<Tool
+						Name="VCCustomBuildTool"/>
+				</FileConfiguration>
+			</File>
+			<File
+				RelativePath="..\..\..\zlib\zutil.c">
+			</File>
+		</Filter>
+		<Filter
+			Name="Header Files"
+			Filter="h;hpp;hxx;hm;inl">
+			<File
+				RelativePath="..\..\..\zlib\crc32.h">
+			</File>
+			<File
+				RelativePath="..\..\..\zlib\deflate.h">
+			</File>
+			<File
+				RelativePath="..\..\..\zlib\inffast.h">
+			</File>
+			<File
+				RelativePath="..\..\..\zlib\inffixed.h">
+			</File>
+			<File
+				RelativePath="..\..\..\zlib\inflate.h">
+			</File>
+			<File
+				RelativePath="..\..\..\zlib\inftrees.h">
+			</File>
+			<File
+				RelativePath="..\..\..\zlib\trees.h">
+			</File>
+			<File
+				RelativePath="..\..\..\zlib\zconf.h">
+			</File>
+			<File
+				RelativePath="..\..\..\zlib\zlib.h">
+			</File>
+			<File
+				RelativePath="..\..\..\zlib\zutil.h">
+			</File>
+		</Filter>
+		<Filter
+			Name="Resource Files"
+			Filter="ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe">
+			<File
+				RelativePath="..\..\..\zlib\win32\zlib1.rc">
+				<FileConfiguration
+					Name="LIB Release|Win32"
+					ExcludedFromBuild="TRUE">
+					<Tool
+						Name="VCResourceCompilerTool"/>
+				</FileConfiguration>
+				<FileConfiguration
+					Name="LIB Debug|Win32"
+					ExcludedFromBuild="TRUE">
+					<Tool
+						Name="VCResourceCompilerTool"/>
+				</FileConfiguration>
+				<FileConfiguration
+					Name="LIB ASM Release|Win32"
+					ExcludedFromBuild="TRUE">
+					<Tool
+						Name="VCResourceCompilerTool"/>
+				</FileConfiguration>
+				<FileConfiguration
+					Name="LIB ASM Debug|Win32"
+					ExcludedFromBuild="TRUE">
+					<Tool
+						Name="VCResourceCompilerTool"/>
+				</FileConfiguration>
+			</File>
+		</Filter>
+		<Filter
+			Name="Assembler Files (Unsupported)"
+			Filter="asm;obj;c;cpp;cxx;h;hpp;hxx">
+			<File
+				RelativePath="..\..\..\zlib\contrib\masmx86\gvmat32.asm">
+				<FileConfiguration
+					Name="DLL Release|Win32"
+					ExcludedFromBuild="TRUE">
+					<Tool
+						Name="VCCustomBuildTool"/>
+				</FileConfiguration>
+				<FileConfiguration
+					Name="DLL Debug|Win32"
+					ExcludedFromBuild="TRUE">
+					<Tool
+						Name="VCCustomBuildTool"/>
+				</FileConfiguration>
+				<FileConfiguration
+					Name="DLL ASM Release|Win32">
+					<Tool
+						Name="VCCustomBuildTool"
+						Description="Assembling..."
+						CommandLine="ml /nologo /c /Cx /coff /Fo&quot;$(IntDir)\$(InputName).obj&quot; &quot;$(InputPath)&quot;
+"
+						Outputs="$(IntDir)\$(InputName).obj"/>
+				</FileConfiguration>
+				<FileConfiguration
+					Name="DLL ASM Debug|Win32">
+					<Tool
+						Name="VCCustomBuildTool"
+						Description="Assembling..."
+						CommandLine="ml /nologo /c /Cx /coff /Zi /Fo&quot;$(IntDir)\$(InputName).obj&quot; &quot;$(InputPath)&quot;
+"
+						Outputs="$(IntDir)\$(InputName).obj"/>
+				</FileConfiguration>
+				<FileConfiguration
+					Name="LIB Release|Win32"
+					ExcludedFromBuild="TRUE">
+					<Tool
+						Name="VCCustomBuildTool"/>
+				</FileConfiguration>
+				<FileConfiguration
+					Name="LIB Debug|Win32"
+					ExcludedFromBuild="TRUE">
+					<Tool
+						Name="VCCustomBuildTool"/>
+				</FileConfiguration>
+				<FileConfiguration
+					Name="LIB ASM Release|Win32">
+					<Tool
+						Name="VCCustomBuildTool"
+						Description="Assembling..."
+						CommandLine="ml /nologo /c /Cx /coff /Fo&quot;$(IntDir)\$(InputName).obj&quot; &quot;$(InputPath)&quot;
+"
+						Outputs="$(IntDir)\$(InputName).obj"/>
+				</FileConfiguration>
+				<FileConfiguration
+					Name="LIB ASM Debug|Win32">
+					<Tool
+						Name="VCCustomBuildTool"
+						Description="Assembling..."
+						CommandLine="ml /nologo /c /Cx /coff /Zi /Fo&quot;$(IntDir)\$(InputName).obj&quot; &quot;$(InputPath)&quot;
+"
+						Outputs="$(IntDir)\$(InputName).obj"/>
+				</FileConfiguration>
+			</File>
+			<File
+				RelativePath="..\..\..\zlib\contrib\masmx86\gvmat32c.c">
+				<FileConfiguration
+					Name="DLL Release|Win32"
+					ExcludedFromBuild="TRUE">
+					<Tool
+						Name="VCCLCompilerTool"/>
+				</FileConfiguration>
+				<FileConfiguration
+					Name="DLL Debug|Win32"
+					ExcludedFromBuild="TRUE">
+					<Tool
+						Name="VCCLCompilerTool"/>
+				</FileConfiguration>
+				<FileConfiguration
+					Name="DLL ASM Release|Win32">
+					<Tool
+						Name="VCCLCompilerTool"
+						AdditionalIncludeDirectories="..\.."/>
+				</FileConfiguration>
+				<FileConfiguration
+					Name="DLL ASM Debug|Win32">
+					<Tool
+						Name="VCCLCompilerTool"
+						AdditionalIncludeDirectories="..\.."/>
+				</FileConfiguration>
+				<FileConfiguration
+					Name="LIB Release|Win32"
+					ExcludedFromBuild="TRUE">
+					<Tool
+						Name="VCCLCompilerTool"/>
+				</FileConfiguration>
+				<FileConfiguration
+					Name="LIB Debug|Win32"
+					ExcludedFromBuild="TRUE">
+					<Tool
+						Name="VCCLCompilerTool"/>
+				</FileConfiguration>
+				<FileConfiguration
+					Name="LIB ASM Release|Win32">
+					<Tool
+						Name="VCCLCompilerTool"
+						AdditionalIncludeDirectories="..\.."/>
+				</FileConfiguration>
+				<FileConfiguration
+					Name="LIB ASM Debug|Win32">
+					<Tool
+						Name="VCCLCompilerTool"
+						AdditionalIncludeDirectories="..\.."/>
+				</FileConfiguration>
+			</File>
+			<File
+				RelativePath="..\..\..\zlib\contrib\masmx86\inffas32.asm">
+				<FileConfiguration
+					Name="DLL Release|Win32"
+					ExcludedFromBuild="TRUE">
+					<Tool
+						Name="VCCustomBuildTool"/>
+				</FileConfiguration>
+				<FileConfiguration
+					Name="DLL Debug|Win32"
+					ExcludedFromBuild="TRUE">
+					<Tool
+						Name="VCCustomBuildTool"/>
+				</FileConfiguration>
+				<FileConfiguration
+					Name="DLL ASM Release|Win32">
+					<Tool
+						Name="VCCustomBuildTool"
+						Description="Assembling..."
+						CommandLine="ml /nologo /c /Cx /coff /Fo&quot;$(IntDir)\$(InputName).obj&quot; &quot;$(InputPath)&quot;
+"
+						Outputs="$(IntDir)\$(InputName).obj"/>
+				</FileConfiguration>
+				<FileConfiguration
+					Name="DLL ASM Debug|Win32">
+					<Tool
+						Name="VCCustomBuildTool"
+						Description="Assembling..."
+						CommandLine="ml /nologo /c /Cx /coff /Zi /Fo&quot;$(IntDir)\$(InputName).obj&quot; &quot;$(InputPath)&quot;
+"
+						Outputs="$(IntDir)\$(InputName).obj"/>
+				</FileConfiguration>
+				<FileConfiguration
+					Name="LIB Release|Win32"
+					ExcludedFromBuild="TRUE">
+					<Tool
+						Name="VCCustomBuildTool"/>
+				</FileConfiguration>
+				<FileConfiguration
+					Name="LIB Debug|Win32"
+					ExcludedFromBuild="TRUE">
+					<Tool
+						Name="VCCustomBuildTool"/>
+				</FileConfiguration>
+				<FileConfiguration
+					Name="LIB ASM Release|Win32">
+					<Tool
+						Name="VCCustomBuildTool"
+						Description="Assembling..."
+						CommandLine="ml /nologo /c /Cx /coff /Fo&quot;$(IntDir)\$(InputName).obj&quot; &quot;$(InputPath)&quot;
+"
+						Outputs="$(IntDir)\$(InputName).obj"/>
+				</FileConfiguration>
+				<FileConfiguration
+					Name="LIB ASM Debug|Win32">
+					<Tool
+						Name="VCCustomBuildTool"
+						Description="Assembling..."
+						CommandLine="ml /nologo /c /Cx /coff /Zi /Fo&quot;$(IntDir)\$(InputName).obj&quot; &quot;$(InputPath)&quot;
+"
+						Outputs="$(IntDir)\$(InputName).obj"/>
+				</FileConfiguration>
+			</File>
+		</Filter>
+		<File
+			RelativePath="README.txt">
+		</File>
+	</Files>
+	<Globals>
+	</Globals>
+</VisualStudioProject>
diff --git a/scripts/libpng-config-head.in b/scripts/libpng-config-head.in
index e7f9c13..b2c6a33 100755
--- a/scripts/libpng-config-head.in
+++ b/scripts/libpng-config-head.in
@@ -8,7 +8,7 @@
 
 # Modeled after libxml-config.
 
-version=1.2.8rc5
+version=1.2.8
 prefix=""
 libdir=""
 libs=""
diff --git a/scripts/libpng.pc.in b/scripts/libpng.pc.in
index 194841d..f164c41 100644
--- a/scripts/libpng.pc.in
+++ b/scripts/libpng.pc.in
@@ -6,6 +6,6 @@
 
 Name: libpng12
 Description: Loads and saves PNG files
-Version: 1.2.8rc5
+Version: 1.2.8
 Libs: -L${libdir} -lpng12 -lz -lm
 Cflags: -I${includedir}/libpng12
diff --git a/scripts/makefile.32sunu b/scripts/makefile.32sunu
index 9309d14..a70c1a1 100644
--- a/scripts/makefile.32sunu
+++ b/scripts/makefile.32sunu
@@ -33,7 +33,7 @@
 
 LIBNAME=libpng12
 PNGMAJ = 0
-PNGMIN = 1.2.8rc5
+PNGMIN = 1.2.8
 PNGVER = $(PNGMAJ).$(PNGMIN)
 
 INCPATH=$(prefix)/include
diff --git a/scripts/makefile.64sunu b/scripts/makefile.64sunu
index 381d8cb..4b3360a 100644
--- a/scripts/makefile.64sunu
+++ b/scripts/makefile.64sunu
@@ -33,7 +33,7 @@
 
 LIBNAME=libpng12
 PNGMAJ = 0
-PNGMIN = 1.2.8rc5
+PNGMIN = 1.2.8
 PNGVER = $(PNGMAJ).$(PNGMIN)
 
 INCPATH=$(prefix)/include
diff --git a/scripts/makefile.aix b/scripts/makefile.aix
index 6ae0f46..93aec12 100644
--- a/scripts/makefile.aix
+++ b/scripts/makefile.aix
@@ -18,7 +18,7 @@
 
 LIBNAME=libpng12
 PNGMAJ = 0
-PNGMIN = 1.2.8rc5
+PNGMIN = 1.2.8
 PNGVER = $(PNGMAJ).$(PNGMIN)
 
 prefix=/usr/local
diff --git a/scripts/makefile.beos b/scripts/makefile.beos
index c1f8d51..98ace87 100644
--- a/scripts/makefile.beos
+++ b/scripts/makefile.beos
@@ -12,7 +12,7 @@
 ZLIBINC=/usr/local/include
 
 PNGMAJ = 0
-PNGMIN = 1.2.8rc5
+PNGMIN = 1.2.8
 PNGVER = $(PNGMAJ).$(PNGMIN)
 
 ALIGN=
diff --git a/scripts/makefile.cygwin b/scripts/makefile.cygwin
index f23536c..09f92d3 100644
--- a/scripts/makefile.cygwin
+++ b/scripts/makefile.cygwin
@@ -79,7 +79,7 @@
 LIBNAME = libpng12
 PNGMAJ = 0
 CYGDLL = 12
-PNGMIN = 1.2.8rc5
+PNGMIN = 1.2.8
 PNGVER = $(PNGMAJ).$(PNGMIN)
 
 SHAREDLIB=cygpng$(CYGDLL).dll
diff --git a/scripts/makefile.darwin b/scripts/makefile.darwin
index 9e0acce..1a1f988 100644
--- a/scripts/makefile.darwin
+++ b/scripts/makefile.darwin
@@ -23,7 +23,7 @@
 RANLIB=ranlib
 
 PNGMAJ = 0
-PNGMIN = 1.2.8rc5
+PNGMIN = 1.2.8
 PNGVER = $(PNGMAJ).$(PNGMIN)
 LIBNAME = libpng12
 
diff --git a/scripts/makefile.dec b/scripts/makefile.dec
index fdaec2c..f8482f9 100644
--- a/scripts/makefile.dec
+++ b/scripts/makefile.dec
@@ -32,7 +32,7 @@
 ZLIBINC=../zlib
 
 PNGMAJ = 0
-PNGMIN = 1.2.8rc5
+PNGMIN = 1.2.8
 PNGVER = $(PNGMAJ).$(PNGMIN)
 LIBNAME = libpng12
 
diff --git a/scripts/makefile.elf b/scripts/makefile.elf
index 30016ad..a04b497 100644
--- a/scripts/makefile.elf
+++ b/scripts/makefile.elf
@@ -5,7 +5,7 @@
 
 LIBNAME = libpng12
 PNGMAJ = 0
-PNGMIN = 1.2.8rc5
+PNGMIN = 1.2.8
 PNGVER = $(PNGMAJ).$(PNGMIN)
 
 CC=gcc
diff --git a/scripts/makefile.gcmmx b/scripts/makefile.gcmmx
index 564d697..c46c221 100644
--- a/scripts/makefile.gcmmx
+++ b/scripts/makefile.gcmmx
@@ -15,7 +15,7 @@
 
 LIBNAME = libpng12
 PNGMAJ = 0
-PNGMIN = 1.2.8rc5
+PNGMIN = 1.2.8
 PNGVER = $(PNGMAJ).$(PNGMIN)
 
 CC=gcc
diff --git a/scripts/makefile.hp64 b/scripts/makefile.hp64
index 70ad5f6..e860e37 100644
--- a/scripts/makefile.hp64
+++ b/scripts/makefile.hp64
@@ -27,7 +27,7 @@
 RANLIB=ranlib
 
 PNGMAJ = 0
-PNGMIN = 1.2.8rc5
+PNGMIN = 1.2.8
 PNGVER = $(PNGMAJ).$(PNGMIN)
 LIBNAME = libpng12
 
diff --git a/scripts/makefile.hpgcc b/scripts/makefile.hpgcc
index 8aade19..d12d6cd 100644
--- a/scripts/makefile.hpgcc
+++ b/scripts/makefile.hpgcc
@@ -41,7 +41,7 @@
 #RANLIB=echo
 
 PNGMAJ = 0
-PNGMIN = 1.2.8rc5
+PNGMIN = 1.2.8
 PNGVER = $(PNGMAJ).$(PNGMIN)
 LIBNAME = libpng12
 
diff --git a/scripts/makefile.hpux b/scripts/makefile.hpux
index d904573..47b5c26 100644
--- a/scripts/makefile.hpux
+++ b/scripts/makefile.hpux
@@ -24,7 +24,7 @@
 RANLIB=ranlib
 
 PNGMAJ = 0
-PNGMIN = 1.2.8rc5
+PNGMIN = 1.2.8
 PNGVER = $(PNGMAJ).$(PNGMIN)
 LIBNAME = libpng12
 
diff --git a/scripts/makefile.linux b/scripts/makefile.linux
index a0d732f..9ba553b 100644
--- a/scripts/makefile.linux
+++ b/scripts/makefile.linux
@@ -5,7 +5,7 @@
 
 LIBNAME = libpng12
 PNGMAJ = 0
-PNGMIN = 1.2.8rc5
+PNGMIN = 1.2.8
 PNGVER = $(PNGMAJ).$(PNGMIN)
 
 CC=gcc
diff --git a/scripts/makefile.ne12bsd b/scripts/makefile.ne12bsd
index d99d2ed..17d317b 100644
--- a/scripts/makefile.ne12bsd
+++ b/scripts/makefile.ne12bsd
@@ -13,7 +13,7 @@
 
 LIB=	png12
 SHLIB_MAJOR=	0
-SHLIB_MINOR=	1.2.8rc5
+SHLIB_MINOR=	1.2.8
 SRCS=	pnggccrd.c png.c pngset.c pngget.c pngrutil.c pngtrans.c pngwutil.c \
 		pngread.c pngrio.c pngwio.c pngwrite.c pngrtran.c \
 		pngwtran.c pngmem.c pngerror.c pngpread.c
diff --git a/scripts/makefile.netbsd b/scripts/makefile.netbsd
index ad237ed..52fa339 100644
--- a/scripts/makefile.netbsd
+++ b/scripts/makefile.netbsd
@@ -13,7 +13,7 @@
 
 LIB=	png
 SHLIB_MAJOR=	3
-SHLIB_MINOR=	1.2.8rc5
+SHLIB_MINOR=	1.2.8
 SRCS=	pnggccrd.c png.c pngset.c pngget.c pngrutil.c pngtrans.c pngwutil.c \
 		pngread.c pngrio.c pngwio.c pngwrite.c pngrtran.c \
 		pngwtran.c pngmem.c pngerror.c pngpread.c
diff --git a/scripts/makefile.openbsd b/scripts/makefile.openbsd
index 0cbebfc..5d401a3 100644
--- a/scripts/makefile.openbsd
+++ b/scripts/makefile.openbsd
@@ -7,7 +7,7 @@
 MANDIR= ${PREFIX}/man/cat
 
 SHLIB_MAJOR=	0
-SHLIB_MINOR=	1.2.8rc5
+SHLIB_MINOR=	1.2.8
 
 LIB=	png
 SRCS=	png.c pngerror.c pnggccrd.c pngget.c pngmem.c pngpread.c \
diff --git a/scripts/makefile.sco b/scripts/makefile.sco
index fb2e9a9..f364231 100644
--- a/scripts/makefile.sco
+++ b/scripts/makefile.sco
@@ -24,7 +24,7 @@
 RANLIB=echo
 
 PNGMAJ = 0
-PNGMIN = 1.2.8rc5
+PNGMIN = 1.2.8
 PNGVER = $(PNGMAJ).$(PNGMIN)
 LIBNAME = libpng12
 
diff --git a/scripts/makefile.sggcc b/scripts/makefile.sggcc
index 709560f..5010daa 100644
--- a/scripts/makefile.sggcc
+++ b/scripts/makefile.sggcc
@@ -18,7 +18,7 @@
 
 LIBNAME=libpng12
 PNGMAJ = 0
-PNGMIN = 1.2.8rc5
+PNGMIN = 1.2.8
 PNGVER = $(PNGMAJ).$(PNGMIN)
 CC=gcc
 
diff --git a/scripts/makefile.sgi b/scripts/makefile.sgi
index f761a85..584da7c 100644
--- a/scripts/makefile.sgi
+++ b/scripts/makefile.sgi
@@ -5,7 +5,7 @@
 
 LIBNAME=libpng12
 PNGMAJ = 0
-PNGMIN = 1.2.8rc5
+PNGMIN = 1.2.8
 PNGVER = $(PNGMAJ).$(PNGMIN)
 
 # Where make install puts libpng.a, libpng12.so, and libpng12/png.h
diff --git a/scripts/makefile.so9 b/scripts/makefile.so9
index 0c82831..a53a80d 100644
--- a/scripts/makefile.so9
+++ b/scripts/makefile.so9
@@ -34,7 +34,7 @@
 RANLIB=echo
 
 PNGMAJ = 0
-PNGMIN = 1.2.8rc5
+PNGMIN = 1.2.8
 PNGVER = $(PNGMAJ).$(PNGMIN)
 LIBNAME = libpng12
 
diff --git a/scripts/makefile.solaris b/scripts/makefile.solaris
index a48f514..8e053f8 100644
--- a/scripts/makefile.solaris
+++ b/scripts/makefile.solaris
@@ -30,7 +30,7 @@
 RANLIB=echo
 
 PNGMAJ = 0
-PNGMIN = 1.2.8rc5
+PNGMIN = 1.2.8
 PNGVER = $(PNGMAJ).$(PNGMIN)
 LIBNAME = libpng12
 
diff --git a/scripts/pngos2.def b/scripts/pngos2.def
index 6d127c1..9aa6135 100644
--- a/scripts/pngos2.def
+++ b/scripts/pngos2.def
@@ -2,7 +2,7 @@
 ; PNG.LIB module definition file for OS/2
 ;----------------------------------------
 
-; Version 1.2.8rc5
+; Version 1.2.8
 
 LIBRARY		PNG
 DESCRIPTION	"PNG image compression library for OS/2"
diff --git a/scripts/pngw32.def b/scripts/pngw32.def
index 88c245e..8303bfe 100644
--- a/scripts/pngw32.def
+++ b/scripts/pngw32.def
@@ -3,10 +3,9 @@
 ;------------------------------------------
 
 LIBRARY
-DESCRIPTION "PNG image compression library for Windows"
 
 EXPORTS
-;Version 1.2.8rc5
+;Version 1.2.8
   png_build_grayscale_palette  @1
   png_check_sig        @2
   png_chunk_error      @3
diff --git a/test-pngtest.sh b/test-pngtest.sh
new file mode 100755
index 0000000..c134a8a
--- /dev/null
+++ b/test-pngtest.sh
@@ -0,0 +1,3 @@
+#!/bin/sh
+
+./pngtest ${srcdir}/pngtest.png