po/Makefile.in.in - third_party/libiconv - Git at Google

 # Makefile for PO directory in any package using GNU gettext.
 # Copyright (C) 1995-2000 Ulrich Drepper <drepper@gnu.ai.mit.edu>
 # Copyright (C) 2000-2019 Free Software Foundation, Inc.
 #
 # Copying and distribution of this file, with or without modification,
 # are permitted in any medium without royalty provided the copyright
 # notice and this notice are preserved.  This file is offered as-is,
 # without any warranty.
 #
 # Origin: gettext-0.20
 GETTEXT_MACRO_VERSION = 0.20

 PACKAGE = @PACKAGE@
 VERSION = @VERSION@
 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@

 SED = @SED@
 SHELL = @SHELL@
 @SET_MAKE@

 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
 VPATH = @srcdir@

 prefix = @prefix@
 exec_prefix = @exec_prefix@
 datarootdir = @datarootdir@
 datadir = @datadir@
 localedir = @localedir@
 gettextsrcdir = $(datadir)/gettext/po

 INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@

 # We use $(mkdir_p).
 # In automake <= 1.9.x, $(mkdir_p) is defined either as "mkdir -p --" or as
 # "$(mkinstalldirs)" or as "$(install_sh) -d". For these automake versions,
 # @install_sh@ does not start with $(SHELL), so we add it.
 # In automake >= 1.10, @mkdir_p@ is derived from ${MKDIR_P}, which is defined
 # either as "/path/to/mkdir -p" or ".../install-sh -c -d". For these automake
 # versions, $(mkinstalldirs) and $(install_sh) are unused.
 mkinstalldirs = $(SHELL) @install_sh@ -d
 install_sh = $(SHELL) @install_sh@
 MKDIR_P = @MKDIR_P@
 mkdir_p = @mkdir_p@

 # When building gettext-tools, we prefer to use the built programs
 # rather than installed programs.  However, we can't do that when we
 # are cross compiling.
 CROSS_COMPILING = @CROSS_COMPILING@

 GMSGFMT_ = @GMSGFMT@
 GMSGFMT_no = @GMSGFMT@
 GMSGFMT_yes = @GMSGFMT_015@
 GMSGFMT = $(GMSGFMT_$(USE_MSGCTXT))
 XGETTEXT_ = @XGETTEXT@
 XGETTEXT_no = @XGETTEXT@
 XGETTEXT_yes = @XGETTEXT_015@
 XGETTEXT = $(XGETTEXT_$(USE_MSGCTXT))
 MSGMERGE = @MSGMERGE@
 MSGMERGE_UPDATE = @MSGMERGE@ --update
 MSGMERGE_FOR_MSGFMT_OPTION = @MSGMERGE_FOR_MSGFMT_OPTION@
 MSGINIT = msginit
 MSGCONV = msgconv
 MSGFILTER = msgfilter

 POFILES = @POFILES@
 GMOFILES = @GMOFILES@
 UPDATEPOFILES = @UPDATEPOFILES@
 DUMMYPOFILES = @DUMMYPOFILES@
 DISTFILES.common = Makefile.in.in remove-potcdate.sin \
 $(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3)
 DISTFILES = $(DISTFILES.common) Makevars POTFILES.in \
 $(POFILES) $(GMOFILES) \
 $(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3)

 POTFILES = \

 CATALOGS = @CATALOGS@

 POFILESDEPS_ = $(srcdir)/$(DOMAIN).pot
 POFILESDEPS_yes = $(POFILESDEPS_)
 POFILESDEPS_no =
 POFILESDEPS = $(POFILESDEPS_$(PO_DEPENDS_ON_POT))

 DISTFILESDEPS_ = update-po
 DISTFILESDEPS_yes = $(DISTFILESDEPS_)
 DISTFILESDEPS_no =
 DISTFILESDEPS = $(DISTFILESDEPS_$(DIST_DEPENDS_ON_UPDATE_PO))

 # Makevars gets inserted here. (Don't remove this line!)

 .SUFFIXES:
 .SUFFIXES: .po .gmo .sed .sin .nop .po-create .po-update

 # The .pot file, stamp-po, .po files, and .gmo files appear in release tarballs.
 # The GNU Coding Standards say in
 # <https://www.gnu.org/prep/standards/html_node/Makefile-Basics.html>:
 #   "GNU distributions usually contain some files which are not source files
 #    ... . Since these files normally appear in the source directory, they
 #    should always appear in the source directory, not in the build directory.
 #    So Makefile rules to update them should put the updated files in the
 #    source directory."
 # Therefore we put these files in the source directory, not the build directory.

 # During .po -> .gmo conversion, take into account the most recent changes to
 # the .pot file. This eliminates the need to update the .po files when the
 # .pot file has changed, which would be troublesome if the .po files are put
 # under version control.
 .po.gmo: $(srcdir)/$(DOMAIN).pot
 	@lang=`echo $* | sed -e 's,.*/,,'`; \
 	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
 	echo "$${cdcmd}rm -f $${lang}.gmo && $(MSGMERGE) $(MSGMERGE_FOR_MSGFMT_OPTION) -o $${lang}.1po $${lang}.po $(DOMAIN).pot && $(GMSGFMT) -c --statistics --verbose -o $${lang}.gmo $${lang}.1po && rm -f $${lang}.1po"; \
 	cd $(srcdir) && \
 	rm -f $${lang}.gmo && \
 	$(MSGMERGE) $(MSGMERGE_FOR_MSGFMT_OPTION) -o $${lang}.1po $${lang}.po $(DOMAIN).pot && \
 	$(GMSGFMT) -c --statistics --verbose -o t-$${lang}.gmo $${lang}.1po && \
 	mv t-$${lang}.gmo $${lang}.gmo && \
 	rm -f $${lang}.1po

 .sin.sed:
 	sed -e '/^#/d' $< > t-$@
 	mv t-$@ $@


 all: all-@USE_NLS@

 all-yes: $(srcdir)/stamp-po
 all-no:

 # Ensure that the gettext macros and this Makefile.in.in are in sync.
 CHECK_MACRO_VERSION = \
 	test "$(GETTEXT_MACRO_VERSION)" = "@GETTEXT_MACRO_VERSION@" \
 	  || { echo "*** error: gettext infrastructure mismatch: using a Makefile.in.in from gettext version $(GETTEXT_MACRO_VERSION) but the autoconf macros are from gettext version @GETTEXT_MACRO_VERSION@" 1>&2; \
 	       exit 1; \
 	     }

 # $(srcdir)/$(DOMAIN).pot is only created when needed. When xgettext finds no
 # internationalized messages, no $(srcdir)/$(DOMAIN).pot is created (because
 # we don't want to bother translators with empty POT files). We assume that
 # LINGUAS is empty in this case, i.e. $(POFILES) and $(GMOFILES) are empty.
 # In this case, $(srcdir)/stamp-po is a nop (i.e. a phony target).

 # $(srcdir)/stamp-po is a timestamp denoting the last time at which the CATALOGS
 # have been loosely updated. Its purpose is that when a developer or translator
 # checks out the package from a version control system, and the $(DOMAIN).pot
 # file is not under version control, "make" will update the $(DOMAIN).pot and
 # the $(CATALOGS), but subsequent invocations of "make" will do nothing. This
 # timestamp would not be necessary if updating the $(CATALOGS) would always
 # touch them; however, the rule for $(POFILES) has been designed to not touch
 # files that don't need to be changed.
 $(srcdir)/stamp-po: $(srcdir)/$(DOMAIN).pot
 	@$(CHECK_MACRO_VERSION)
 	test ! -f $(srcdir)/$(DOMAIN).pot || \
 	  test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES)
 	@test ! -f $(srcdir)/$(DOMAIN).pot || { \
 	  echo "touch $(srcdir)/stamp-po" && \
 	  echo timestamp > $(srcdir)/stamp-poT && \
 	  mv $(srcdir)/stamp-poT $(srcdir)/stamp-po; \
 	}

 # Note: Target 'all' must not depend on target '$(DOMAIN).pot-update',
 # otherwise packages like GCC can not be built if only parts of the source
 # have been downloaded.

 # This target rebuilds $(DOMAIN).pot; it is an expensive operation.
 # Note that $(DOMAIN).pot is not touched if it doesn't need to be changed.
 # The determination of whether the package xyz is a GNU one is based on the
 # heuristic whether some file in the top level directory mentions "GNU xyz".
 # If GNU 'find' is available, we avoid grepping through monster files.
 $(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed
 	package_gnu="$(PACKAGE_GNU)"; \
 	test -n "$$package_gnu" || { \
 	  if { if (LC_ALL=C find --version) 2>/dev/null | grep GNU >/dev/null; then \
 	         LC_ALL=C find -L $(top_srcdir) -maxdepth 1 -type f -size -10000000c -exec grep -i 'GNU @PACKAGE@' /dev/null '{}' ';' 2>/dev/null; \
 	       else \
 	         LC_ALL=C grep -i 'GNU @PACKAGE@' $(top_srcdir)/* 2>/dev/null; \
 	       fi; \
 	     } | grep -v 'libtool:' >/dev/null; then \
 	     package_gnu=yes; \
 	   else \
 	     package_gnu=no; \
 	   fi; \
 	}; \
 	if test "$$package_gnu" = "yes"; then \
 	  package_prefix='GNU '; \
 	else \
 	  package_prefix=''; \
 	fi; \
 	if test -n '$(MSGID_BUGS_ADDRESS)' || test '$(PACKAGE_BUGREPORT)' = '@'PACKAGE_BUGREPORT'@'; then \
 	  msgid_bugs_address='$(MSGID_BUGS_ADDRESS)'; \
 	else \
 	  msgid_bugs_address='$(PACKAGE_BUGREPORT)'; \
 	fi; \
 	case `$(XGETTEXT) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
 	  '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].* | 0.16 | 0.16.[0-1]*) \
 	    $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
 	      --add-comments=TRANSLATORS: \
 	      --files-from=$(srcdir)/POTFILES.in \
 	      --copyright-holder='$(COPYRIGHT_HOLDER)' \
 	      --msgid-bugs-address="$$msgid_bugs_address" \
 	      $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \
 	    ;; \
 	  *) \
 	    $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
 	      --add-comments=TRANSLATORS: \
 	      --files-from=$(srcdir)/POTFILES.in \
 	      --copyright-holder='$(COPYRIGHT_HOLDER)' \
 	      --package-name="$${package_prefix}@PACKAGE@" \
 	      --package-version='@VERSION@' \
 	      --msgid-bugs-address="$$msgid_bugs_address" \
 	      $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \
 	    ;; \
 	esac
 	test ! -f $(DOMAIN).po || { \
 	  if test -f $(srcdir)/$(DOMAIN).pot-header; then \
 	    sed -e '1,/^#$$/d' < $(DOMAIN).po > $(DOMAIN).1po && \
 	    cat $(srcdir)/$(DOMAIN).pot-header $(DOMAIN).1po > $(DOMAIN).po && \
 	    rm -f $(DOMAIN).1po \
 	    || exit 1; \
 	  fi; \
 	  if test -f $(srcdir)/$(DOMAIN).pot; then \
 	    sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \
 	    sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \
 	    if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \
 	      rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \
 	    else \
 	      rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \
 	      mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
 	    fi; \
 	  else \
 	    mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
 	  fi; \
 	}

 # This rule has no dependencies: we don't need to update $(DOMAIN).pot at
 # every "make" invocation, only create it when it is missing.
 # Only "make $(DOMAIN).pot-update" or "make dist" will force an update.
 $(srcdir)/$(DOMAIN).pot:
 	$(MAKE) $(DOMAIN).pot-update

 # This target rebuilds a PO file if $(DOMAIN).pot has changed.
 # Note that a PO file is not touched if it doesn't need to be changed.
 $(POFILES): $(POFILESDEPS)
 	@test -f $(srcdir)/$(DOMAIN).pot || $(MAKE) $(srcdir)/$(DOMAIN).pot
 	@lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \
 	if test -f "$(srcdir)/$${lang}.po"; then \
 	  test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
 	  echo "$${cdcmd}$(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} --previous $${lang}.po $(DOMAIN).pot"; \
 	  cd $(srcdir) \
 	    && { case `$(MSGMERGE_UPDATE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
 	           '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].*) \
 	             $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) $${lang}.po $(DOMAIN).pot;; \
 	           0.1[6-7] | 0.1[6-7].*) \
 	             $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --previous $${lang}.po $(DOMAIN).pot;; \
 	           *) \
 	             $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} --previous $${lang}.po $(DOMAIN).pot;; \
 	         esac; \
 	       }; \
 	else \
 	  $(MAKE) $${lang}.po-create; \
 	fi


 install: install-exec install-data
 install-exec:
 install-data: install-data-@USE_NLS@
 	if test "$(PACKAGE)" = "gettext-tools"; then \
 	  $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
 	  for file in $(DISTFILES.common) Makevars.template; do \
 	    $(INSTALL_DATA) $(srcdir)/$$file \
 			    $(DESTDIR)$(gettextsrcdir)/$$file; \
 	  done; \
 	  for file in Makevars; do \
 	    rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
 	  done; \
 	else \
 	  : ; \
 	fi
 install-data-no: all
 install-data-yes: all
 	@catalogs='$(CATALOGS)'; \
 	for cat in $$catalogs; do \
 	  cat=`basename $$cat`; \
 	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
 	  dir=$(localedir)/$$lang/LC_MESSAGES; \
 	  $(mkdir_p) $(DESTDIR)$$dir; \
 	  if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \
 	  $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \
 	  echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \
 	  for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
 	    if test -n "$$lc"; then \
 	      if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
 	        link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
 	        mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
 	        mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
 	        (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
 	         for file in *; do \
 	           if test -f $$file; then \
 	             ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
 	           fi; \
 	         done); \
 	        rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
 	      else \
 	        if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
 	          :; \
 	        else \
 	          rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
 	          mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
 	        fi; \
 	      fi; \
 	      rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
 	      ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
 	      ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
 	      cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
 	      echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \
 	    fi; \
 	  done; \
 	done

 install-strip: install

 installdirs: installdirs-exec installdirs-data
 installdirs-exec:
 installdirs-data: installdirs-data-@USE_NLS@
 	if test "$(PACKAGE)" = "gettext-tools"; then \
 	  $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
 	else \
 	  : ; \
 	fi
 installdirs-data-no:
 installdirs-data-yes:
 	@catalogs='$(CATALOGS)'; \
 	for cat in $$catalogs; do \
 	  cat=`basename $$cat`; \
 	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
 	  dir=$(localedir)/$$lang/LC_MESSAGES; \
 	  $(mkdir_p) $(DESTDIR)$$dir; \
 	  for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
 	    if test -n "$$lc"; then \
 	      if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
 	        link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
 	        mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
 	        mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
 	        (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
 	         for file in *; do \
 	           if test -f $$file; then \
 	             ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
 	           fi; \
 	         done); \
 	        rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
 	      else \
 	        if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
 	          :; \
 	        else \
 	          rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
 	          mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
 	        fi; \
 	      fi; \
 	    fi; \
 	  done; \
 	done

 # Define this as empty until I found a useful application.
 installcheck:

 uninstall: uninstall-exec uninstall-data
 uninstall-exec:
 uninstall-data: uninstall-data-@USE_NLS@
 	if test "$(PACKAGE)" = "gettext-tools"; then \
 	  for file in $(DISTFILES.common) Makevars.template; do \
 	    rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
 	  done; \
 	else \
 	  : ; \
 	fi
 uninstall-data-no:
 uninstall-data-yes:
 	catalogs='$(CATALOGS)'; \
 	for cat in $$catalogs; do \
 	  cat=`basename $$cat`; \
 	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
 	  for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \
 	    rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
 	  done; \
 	done

 check: all

 info dvi ps pdf html tags TAGS ctags CTAGS ID:

 install-dvi install-ps install-pdf install-html:

 mostlyclean:
 	rm -f remove-potcdate.sed
 	rm -f $(srcdir)/stamp-poT
 	rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po
 	rm -fr *.o

 clean: mostlyclean

 distclean: clean
 	rm -f Makefile Makefile.in POTFILES

 maintainer-clean: distclean
 	@echo "This command is intended for maintainers to use;"
 	@echo "it deletes files that may require special tools to rebuild."
 	rm -f $(srcdir)/$(DOMAIN).pot $(srcdir)/stamp-po $(GMOFILES)

 distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
 dist distdir:
 	test -z "$(DISTFILESDEPS)" || $(MAKE) $(DISTFILESDEPS)
 	@$(MAKE) dist2
 # This is a separate target because 'update-po' must be executed before.
 dist2: $(srcdir)/stamp-po $(DISTFILES)
 	dists="$(DISTFILES)"; \
 	if test "$(PACKAGE)" = "gettext-tools"; then \
 	  dists="$$dists Makevars.template"; \
 	fi; \
 	if test -f $(srcdir)/$(DOMAIN).pot; then \
 	  dists="$$dists $(DOMAIN).pot stamp-po"; \
 	fi; \
 	if test -f $(srcdir)/ChangeLog; then \
 	  dists="$$dists ChangeLog"; \
 	fi; \
 	for i in 0 1 2 3 4 5 6 7 8 9; do \
 	  if test -f $(srcdir)/ChangeLog.$$i; then \
 	    dists="$$dists ChangeLog.$$i"; \
 	  fi; \
 	done; \
 	if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \
 	for file in $$dists; do \
 	  if test -f $$file; then \
 	    cp -p $$file $(distdir) || exit 1; \
 	  else \
 	    cp -p $(srcdir)/$$file $(distdir) || exit 1; \
 	  fi; \
 	done

 update-po: Makefile
 	$(MAKE) $(DOMAIN).pot-update
 	test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES)
 	$(MAKE) update-gmo

 # General rule for creating PO files.

 .nop.po-create:
 	@lang=`echo $@ | sed -e 's/\.po-create$$//'`; \
 	echo "File $$lang.po does not exist. If you are a translator, you can create it through 'msginit'." 1>&2; \
 	exit 1

 # General rule for updating PO files.

 .nop.po-update:
 	@lang=`echo $@ | sed -e 's/\.po-update$$//'`; \
 	if test "$(PACKAGE)" = "gettext-tools" && test "$(CROSS_COMPILING)" != "yes"; then PATH=`pwd`/../src:$$PATH; fi; \
 	tmpdir=`pwd`; \
 	echo "$$lang:"; \
 	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
 	echo "$${cdcmd}$(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang --previous $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \
 	cd $(srcdir); \
 	if { case `$(MSGMERGE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
 	       '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].*) \
 	         $(MSGMERGE) $(MSGMERGE_OPTIONS) -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
 	       0.1[6-7] | 0.1[6-7].*) \
 	         $(MSGMERGE) $(MSGMERGE_OPTIONS) --previous -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
 	       *) \
 	         $(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang --previous -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
 	     esac; \
 	   }; then \
 	  if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
 	    rm -f $$tmpdir/$$lang.new.po; \
 	  else \
 	    if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
 	      :; \
 	    else \
 	      echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
 	      exit 1; \
 	    fi; \
 	  fi; \
 	else \
 	  echo "msgmerge for $$lang.po failed!" 1>&2; \
 	  rm -f $$tmpdir/$$lang.new.po; \
 	fi

 $(DUMMYPOFILES):

 update-gmo: Makefile $(GMOFILES)
 	@:

 # Recreate Makefile by invoking config.status. Explicitly invoke the shell,
 # because execution permission bits may not work on the current file system.
 # Use @SHELL@, which is the shell determined by autoconf for the use by its
 # scripts, not $(SHELL) which is hardwired to /bin/sh and may be deficient.
 Makefile: Makefile.in.in Makevars $(top_builddir)/config.status @POMAKEFILEDEPS@
 	cd $(top_builddir) \
 	  && @SHELL@ ./config.status $(subdir)/$@.in po-directories

 force:

 # Tell versions [3.59,3.63) of GNU make not to export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
	# Makefile for PO directory in any package using GNU gettext.
	# Copyright (C) 1995-2000 Ulrich Drepper <drepper@gnu.ai.mit.edu>
	# Copyright (C) 2000-2019 Free Software Foundation, Inc.
	#
	# Copying and distribution of this file, with or without modification,
	# are permitted in any medium without royalty provided the copyright
	# notice and this notice are preserved. This file is offered as-is,
	# without any warranty.
	#
	# Origin: gettext-0.20
	GETTEXT_MACRO_VERSION = 0.20

	PACKAGE = @PACKAGE@
	VERSION = @VERSION@
	PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@

	SED = @SED@
	SHELL = @SHELL@
	@SET_MAKE@

	srcdir = @srcdir@
	top_srcdir = @top_srcdir@
	VPATH = @srcdir@

	prefix = @prefix@
	exec_prefix = @exec_prefix@
	datarootdir = @datarootdir@
	datadir = @datadir@
	localedir = @localedir@
	gettextsrcdir = $(datadir)/gettext/po

	INSTALL = @INSTALL@
	INSTALL_DATA = @INSTALL_DATA@

	# We use $(mkdir_p).
	# In automake <= 1.9.x, $(mkdir_p) is defined either as "mkdir -p --" or as
	# "$(mkinstalldirs)" or as "$(install_sh) -d". For these automake versions,
	# @install_sh@ does not start with $(SHELL), so we add it.
	# In automake >= 1.10, @mkdir_p@ is derived from ${MKDIR_P}, which is defined
	# either as "/path/to/mkdir -p" or ".../install-sh -c -d". For these automake
	# versions, $(mkinstalldirs) and $(install_sh) are unused.
	mkinstalldirs = $(SHELL) @install_sh@ -d
	install_sh = $(SHELL) @install_sh@
	MKDIR_P = @MKDIR_P@
	mkdir_p = @mkdir_p@

	# When building gettext-tools, we prefer to use the built programs
	# rather than installed programs. However, we can't do that when we
	# are cross compiling.
	CROSS_COMPILING = @CROSS_COMPILING@

	GMSGFMT_ = @GMSGFMT@
	GMSGFMT_no = @GMSGFMT@
	GMSGFMT_yes = @GMSGFMT_015@
	GMSGFMT = $(GMSGFMT_$(USE_MSGCTXT))
	XGETTEXT_ = @XGETTEXT@
	XGETTEXT_no = @XGETTEXT@
	XGETTEXT_yes = @XGETTEXT_015@
	XGETTEXT = $(XGETTEXT_$(USE_MSGCTXT))
	MSGMERGE = @MSGMERGE@
	MSGMERGE_UPDATE = @MSGMERGE@ --update
	MSGMERGE_FOR_MSGFMT_OPTION = @MSGMERGE_FOR_MSGFMT_OPTION@
	MSGINIT = msginit
	MSGCONV = msgconv
	MSGFILTER = msgfilter

	POFILES = @POFILES@
	GMOFILES = @GMOFILES@
	UPDATEPOFILES = @UPDATEPOFILES@
	DUMMYPOFILES = @DUMMYPOFILES@
	DISTFILES.common = Makefile.in.in remove-potcdate.sin \
	$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3)
	DISTFILES = $(DISTFILES.common) Makevars POTFILES.in \
	$(POFILES) $(GMOFILES) \
	$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3)

	POTFILES = \

	CATALOGS = @CATALOGS@

	POFILESDEPS_ = $(srcdir)/$(DOMAIN).pot
	POFILESDEPS_yes = $(POFILESDEPS_)
	POFILESDEPS_no =
	POFILESDEPS = $(POFILESDEPS_$(PO_DEPENDS_ON_POT))

	DISTFILESDEPS_ = update-po
	DISTFILESDEPS_yes = $(DISTFILESDEPS_)
	DISTFILESDEPS_no =
	DISTFILESDEPS = $(DISTFILESDEPS_$(DIST_DEPENDS_ON_UPDATE_PO))

	# Makevars gets inserted here. (Don't remove this line!)

	.SUFFIXES:
	.SUFFIXES: .po .gmo .sed .sin .nop .po-create .po-update

	# The .pot file, stamp-po, .po files, and .gmo files appear in release tarballs.
	# The GNU Coding Standards say in
	# <https://www.gnu.org/prep/standards/html_node/Makefile-Basics.html>:
	# "GNU distributions usually contain some files which are not source files
	# ... . Since these files normally appear in the source directory, they
	# should always appear in the source directory, not in the build directory.
	# So Makefile rules to update them should put the updated files in the
	# source directory."
	# Therefore we put these files in the source directory, not the build directory.

	# During .po -> .gmo conversion, take into account the most recent changes to
	# the .pot file. This eliminates the need to update the .po files when the
	# .pot file has changed, which would be troublesome if the .po files are put
	# under version control.
	.po.gmo: $(srcdir)/$(DOMAIN).pot
	@lang=`echo $* \| sed -e 's,.*/,,'`; \
	test "$(srcdir)" = . && cdcmd="" \|\| cdcmd="cd $(srcdir) && "; \
	echo "$${cdcmd}rm -f $${lang}.gmo && $(MSGMERGE) $(MSGMERGE_FOR_MSGFMT_OPTION) -o $${lang}.1po $${lang}.po $(DOMAIN).pot && $(GMSGFMT) -c --statistics --verbose -o $${lang}.gmo $${lang}.1po && rm -f $${lang}.1po"; \
	cd $(srcdir) && \
	rm -f $${lang}.gmo && \
	$(MSGMERGE) $(MSGMERGE_FOR_MSGFMT_OPTION) -o $${lang}.1po $${lang}.po $(DOMAIN).pot && \
	$(GMSGFMT) -c --statistics --verbose -o t-$${lang}.gmo $${lang}.1po && \
	mv t-$${lang}.gmo $${lang}.gmo && \
	rm -f $${lang}.1po

	.sin.sed:
	sed -e '/^#/d' $< > t-$@
	mv t-$@ $@


	all: all-@USE_NLS@

	all-yes: $(srcdir)/stamp-po
	all-no:

	# Ensure that the gettext macros and this Makefile.in.in are in sync.
	CHECK_MACRO_VERSION = \
	test "$(GETTEXT_MACRO_VERSION)" = "@GETTEXT_MACRO_VERSION@" \
	\|\| { echo "*** error: gettext infrastructure mismatch: using a Makefile.in.in from gettext version $(GETTEXT_MACRO_VERSION) but the autoconf macros are from gettext version @GETTEXT_MACRO_VERSION@" 1>&2; \
	exit 1; \
	}

	# $(srcdir)/$(DOMAIN).pot is only created when needed. When xgettext finds no
	# internationalized messages, no $(srcdir)/$(DOMAIN).pot is created (because
	# we don't want to bother translators with empty POT files). We assume that
	# LINGUAS is empty in this case, i.e. $(POFILES) and $(GMOFILES) are empty.
	# In this case, $(srcdir)/stamp-po is a nop (i.e. a phony target).

	# $(srcdir)/stamp-po is a timestamp denoting the last time at which the CATALOGS
	# have been loosely updated. Its purpose is that when a developer or translator
	# checks out the package from a version control system, and the $(DOMAIN).pot
	# file is not under version control, "make" will update the $(DOMAIN).pot and
	# the $(CATALOGS), but subsequent invocations of "make" will do nothing. This
	# timestamp would not be necessary if updating the $(CATALOGS) would always
	# touch them; however, the rule for $(POFILES) has been designed to not touch
	# files that don't need to be changed.
	$(srcdir)/stamp-po: $(srcdir)/$(DOMAIN).pot
	@$(CHECK_MACRO_VERSION)
	test ! -f $(srcdir)/$(DOMAIN).pot \|\| \
	test -z "$(GMOFILES)" \|\| $(MAKE) $(GMOFILES)
	@test ! -f $(srcdir)/$(DOMAIN).pot \|\| { \
	echo "touch $(srcdir)/stamp-po" && \
	echo timestamp > $(srcdir)/stamp-poT && \
	mv $(srcdir)/stamp-poT $(srcdir)/stamp-po; \
	}

	# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update',
	# otherwise packages like GCC can not be built if only parts of the source
	# have been downloaded.

	# This target rebuilds $(DOMAIN).pot; it is an expensive operation.
	# Note that $(DOMAIN).pot is not touched if it doesn't need to be changed.
	# The determination of whether the package xyz is a GNU one is based on the
	# heuristic whether some file in the top level directory mentions "GNU xyz".
	# If GNU 'find' is available, we avoid grepping through monster files.
	$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed
	package_gnu="$(PACKAGE_GNU)"; \
	test -n "$$package_gnu" \|\| { \
	if { if (LC_ALL=C find --version) 2>/dev/null \| grep GNU >/dev/null; then \
	LC_ALL=C find -L $(top_srcdir) -maxdepth 1 -type f -size -10000000c -exec grep -i 'GNU @PACKAGE@' /dev/null '{}' ';' 2>/dev/null; \
	else \
	LC_ALL=C grep -i 'GNU @PACKAGE@' $(top_srcdir)/* 2>/dev/null; \
	fi; \
	} \| grep -v 'libtool:' >/dev/null; then \
	package_gnu=yes; \
	else \
	package_gnu=no; \
	fi; \
	}; \
	if test "$$package_gnu" = "yes"; then \
	package_prefix='GNU '; \
	else \
	package_prefix=''; \
	fi; \
	if test -n '$(MSGID_BUGS_ADDRESS)' \|\| test '$(PACKAGE_BUGREPORT)' = '@'PACKAGE_BUGREPORT'@'; then \
	msgid_bugs_address='$(MSGID_BUGS_ADDRESS)'; \
	else \
	msgid_bugs_address='$(PACKAGE_BUGREPORT)'; \
	fi; \
	case `$(XGETTEXT) --version \| sed 1q \| sed -e 's,^[^0-9]*,,'` in \
	'' \| 0.[0-9] \| 0.[0-9].* \| 0.1[0-5] \| 0.1[0-5].* \| 0.16 \| 0.16.[0-1]*) \
	$(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
	--add-comments=TRANSLATORS: \
	--files-from=$(srcdir)/POTFILES.in \
	--copyright-holder='$(COPYRIGHT_HOLDER)' \
	--msgid-bugs-address="$$msgid_bugs_address" \
	$(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \
	;; \
	*) \
	$(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
	--add-comments=TRANSLATORS: \
	--files-from=$(srcdir)/POTFILES.in \
	--copyright-holder='$(COPYRIGHT_HOLDER)' \
	--package-name="$${package_prefix}@PACKAGE@" \
	--package-version='@VERSION@' \
	--msgid-bugs-address="$$msgid_bugs_address" \
	$(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \
	;; \
	esac
	test ! -f $(DOMAIN).po \|\| { \
	if test -f $(srcdir)/$(DOMAIN).pot-header; then \
	sed -e '1,/^#$$/d' < $(DOMAIN).po > $(DOMAIN).1po && \
	cat $(srcdir)/$(DOMAIN).pot-header $(DOMAIN).1po > $(DOMAIN).po && \
	rm -f $(DOMAIN).1po \
	\|\| exit 1; \
	fi; \
	if test -f $(srcdir)/$(DOMAIN).pot; then \
	sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \
	sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \
	if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \
	rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \
	else \
	rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \
	mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
	fi; \
	else \
	mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
	fi; \
	}

	# This rule has no dependencies: we don't need to update $(DOMAIN).pot at
	# every "make" invocation, only create it when it is missing.
	# Only "make $(DOMAIN).pot-update" or "make dist" will force an update.
	$(srcdir)/$(DOMAIN).pot:
	$(MAKE) $(DOMAIN).pot-update

	# This target rebuilds a PO file if $(DOMAIN).pot has changed.
	# Note that a PO file is not touched if it doesn't need to be changed.
	$(POFILES): $(POFILESDEPS)
	@test -f $(srcdir)/$(DOMAIN).pot \|\| $(MAKE) $(srcdir)/$(DOMAIN).pot
	@lang=`echo $@ \| sed -e 's,.*/,,' -e 's/\.po$$//'`; \
	if test -f "$(srcdir)/$${lang}.po"; then \
	test "$(srcdir)" = . && cdcmd="" \|\| cdcmd="cd $(srcdir) && "; \
	echo "$${cdcmd}$(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} --previous $${lang}.po $(DOMAIN).pot"; \
	cd $(srcdir) \
	&& { case `$(MSGMERGE_UPDATE) --version \| sed 1q \| sed -e 's,^[^0-9]*,,'` in \
	'' \| 0.[0-9] \| 0.[0-9].* \| 0.1[0-5] \| 0.1[0-5].*) \
	$(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) $${lang}.po $(DOMAIN).pot;; \
	0.1[6-7] \| 0.1[6-7].*) \
	$(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --previous $${lang}.po $(DOMAIN).pot;; \
	*) \
	$(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} --previous $${lang}.po $(DOMAIN).pot;; \
	esac; \
	}; \
	else \
	$(MAKE) $${lang}.po-create; \
	fi


	install: install-exec install-data
	install-exec:
	install-data: install-data-@USE_NLS@
	if test "$(PACKAGE)" = "gettext-tools"; then \
	$(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
	for file in $(DISTFILES.common) Makevars.template; do \
	$(INSTALL_DATA) $(srcdir)/$$file \
	$(DESTDIR)$(gettextsrcdir)/$$file; \
	done; \
	for file in Makevars; do \
	rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
	done; \
	else \
	: ; \
	fi
	install-data-no: all
	install-data-yes: all
	@catalogs='$(CATALOGS)'; \
	for cat in $$catalogs; do \
	cat=`basename $$cat`; \
	lang=`echo $$cat \| sed -e 's/\.gmo$$//'`; \
	dir=$(localedir)/$$lang/LC_MESSAGES; \
	$(mkdir_p) $(DESTDIR)$$dir; \
	if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \
	$(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \
	echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \
	for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
	if test -n "$$lc"; then \
	if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) \| grep ' -> ' >/dev/null; then \
	link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc \| sed -e 's/^.* -> //'`; \
	mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
	mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
	(cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
	for file in *; do \
	if test -f $$file; then \
	ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
	fi; \
	done); \
	rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
	else \
	if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
	:; \
	else \
	rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
	mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
	fi; \
	fi; \
	rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
	ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null \|\| \
	ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null \|\| \
	cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
	echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \
	fi; \
	done; \
	done

	install-strip: install

	installdirs: installdirs-exec installdirs-data
	installdirs-exec:
	installdirs-data: installdirs-data-@USE_NLS@
	if test "$(PACKAGE)" = "gettext-tools"; then \
	$(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
	else \
	: ; \
	fi
	installdirs-data-no:
	installdirs-data-yes:
	@catalogs='$(CATALOGS)'; \
	for cat in $$catalogs; do \
	cat=`basename $$cat`; \
	lang=`echo $$cat \| sed -e 's/\.gmo$$//'`; \
	dir=$(localedir)/$$lang/LC_MESSAGES; \
	$(mkdir_p) $(DESTDIR)$$dir; \
	for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
	if test -n "$$lc"; then \
	if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) \| grep ' -> ' >/dev/null; then \
	link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc \| sed -e 's/^.* -> //'`; \
	mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
	mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
	(cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
	for file in *; do \
	if test -f $$file; then \
	ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
	fi; \
	done); \
	rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
	else \
	if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
	:; \
	else \
	rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
	mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
	fi; \
	fi; \
	fi; \
	done; \
	done

	# Define this as empty until I found a useful application.
	installcheck:

	uninstall: uninstall-exec uninstall-data
	uninstall-exec:
	uninstall-data: uninstall-data-@USE_NLS@
	if test "$(PACKAGE)" = "gettext-tools"; then \
	for file in $(DISTFILES.common) Makevars.template; do \
	rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
	done; \
	else \
	: ; \
	fi
	uninstall-data-no:
	uninstall-data-yes:
	catalogs='$(CATALOGS)'; \
	for cat in $$catalogs; do \
	cat=`basename $$cat`; \
	lang=`echo $$cat \| sed -e 's/\.gmo$$//'`; \
	for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \
	rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
	done; \
	done

	check: all

	info dvi ps pdf html tags TAGS ctags CTAGS ID:

	install-dvi install-ps install-pdf install-html:

	mostlyclean:
	rm -f remove-potcdate.sed
	rm -f $(srcdir)/stamp-poT
	rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po
	rm -fr *.o

	clean: mostlyclean

	distclean: clean
	rm -f Makefile Makefile.in POTFILES

	maintainer-clean: distclean
	@echo "This command is intended for maintainers to use;"
	@echo "it deletes files that may require special tools to rebuild."
	rm -f $(srcdir)/$(DOMAIN).pot $(srcdir)/stamp-po $(GMOFILES)

	distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
	dist distdir:
	test -z "$(DISTFILESDEPS)" \|\| $(MAKE) $(DISTFILESDEPS)
	@$(MAKE) dist2
	# This is a separate target because 'update-po' must be executed before.
	dist2: $(srcdir)/stamp-po $(DISTFILES)
	dists="$(DISTFILES)"; \
	if test "$(PACKAGE)" = "gettext-tools"; then \
	dists="$$dists Makevars.template"; \
	fi; \
	if test -f $(srcdir)/$(DOMAIN).pot; then \
	dists="$$dists $(DOMAIN).pot stamp-po"; \
	fi; \
	if test -f $(srcdir)/ChangeLog; then \
	dists="$$dists ChangeLog"; \
	fi; \
	for i in 0 1 2 3 4 5 6 7 8 9; do \
	if test -f $(srcdir)/ChangeLog.$$i; then \
	dists="$$dists ChangeLog.$$i"; \
	fi; \
	done; \
	if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \
	for file in $$dists; do \
	if test -f $$file; then \
	cp -p $$file $(distdir) \|\| exit 1; \
	else \
	cp -p $(srcdir)/$$file $(distdir) \|\| exit 1; \
	fi; \
	done

	update-po: Makefile
	$(MAKE) $(DOMAIN).pot-update
	test -z "$(UPDATEPOFILES)" \|\| $(MAKE) $(UPDATEPOFILES)
	$(MAKE) update-gmo

	# General rule for creating PO files.

	.nop.po-create:
	@lang=`echo $@ \| sed -e 's/\.po-create$$//'`; \
	echo "File $$lang.po does not exist. If you are a translator, you can create it through 'msginit'." 1>&2; \
	exit 1

	# General rule for updating PO files.

	.nop.po-update:
	@lang=`echo $@ \| sed -e 's/\.po-update$$//'`; \
	if test "$(PACKAGE)" = "gettext-tools" && test "$(CROSS_COMPILING)" != "yes"; then PATH=`pwd`/../src:$$PATH; fi; \
	tmpdir=`pwd`; \
	echo "$$lang:"; \
	test "$(srcdir)" = . && cdcmd="" \|\| cdcmd="cd $(srcdir) && "; \
	echo "$${cdcmd}$(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang --previous $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \
	cd $(srcdir); \
	if { case `$(MSGMERGE) --version \| sed 1q \| sed -e 's,^[^0-9]*,,'` in \
	'' \| 0.[0-9] \| 0.[0-9].* \| 0.1[0-5] \| 0.1[0-5].*) \
	$(MSGMERGE) $(MSGMERGE_OPTIONS) -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
	0.1[6-7] \| 0.1[6-7].*) \
	$(MSGMERGE) $(MSGMERGE_OPTIONS) --previous -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
	*) \
	$(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang --previous -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
	esac; \
	}; then \
	if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
	rm -f $$tmpdir/$$lang.new.po; \
	else \
	if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
	:; \
	else \
	echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
	exit 1; \
	fi; \
	fi; \
	else \
	echo "msgmerge for $$lang.po failed!" 1>&2; \
	rm -f $$tmpdir/$$lang.new.po; \
	fi

	$(DUMMYPOFILES):

	update-gmo: Makefile $(GMOFILES)
	@:

	# Recreate Makefile by invoking config.status. Explicitly invoke the shell,
	# because execution permission bits may not work on the current file system.
	# Use @SHELL@, which is the shell determined by autoconf for the use by its
	# scripts, not $(SHELL) which is hardwired to /bin/sh and may be deficient.
	Makefile: Makefile.in.in Makevars $(top_builddir)/config.status @POMAKEFILEDEPS@
	cd $(top_builddir) \
	&& @SHELL@ ./config.status $(subdir)/$@.in po-directories

	force:

	# Tell versions [3.59,3.63) of GNU make not to export all variables.
	# Otherwise a system limit (for SysV at least) may be exceeded.
	.NOEXPORT: