blob: cc9e57b3635d64c472a93e4b57fc83bfe00a3536 [file] [log] [blame]
dnl Parameterized macros.
dnl Requires GNU m4.
dnl This file is part of Autoconf.
dnl Copyright (C) 1992, 93, 94, 95, 96, 1998 Free Software Foundation, Inc.
dnl
dnl This program is free software; you can redistribute it and/or modify
dnl it under the terms of the GNU General Public License as published by
dnl the Free Software Foundation; either version 2, or (at your option)
dnl any later version.
dnl
dnl This program is distributed in the hope that it will be useful,
dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
dnl GNU General Public License for more details.
dnl
dnl You should have received a copy of the GNU General Public License
dnl along with this program; if not, write to the Free Software
dnl Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
dnl 02111-1307, USA.
dnl
dnl As a special exception, the Free Software Foundation gives unlimited
dnl permission to copy, distribute and modify the configure scripts that
dnl are the output of Autoconf. You need not follow the terms of the GNU
dnl General Public License when using or distributing such scripts, even
dnl though portions of the text of Autoconf appear in them. The GNU
dnl General Public License (GPL) does govern all other use of the material
dnl that constitutes the Autoconf program.
dnl
dnl Certain portions of the Autoconf source text are designed to be copied
dnl (in certain cases, depending on the input) into the output of
dnl Autoconf. We call these the "data" portions. The rest of the Autoconf
dnl source text consists of comments plus executable code that decides which
dnl of the data portions to output in any given case. We call these
dnl comments and executable code the "non-data" portions. Autoconf never
dnl copies any of the non-data portions into its output.
dnl
dnl This special exception to the GPL applies to versions of Autoconf
dnl released by the Free Software Foundation. When you make and
dnl distribute a modified version of Autoconf, you may extend this special
dnl exception to the GPL to apply to your modified version as well, *unless*
dnl your modified version has the potential to copy into its output some
dnl of the text that was the non-data portion of the version that you started
dnl with. (In other words, unless your change moves or copies text from
dnl the non-data portions to the data portions.) If your modification has
dnl such potential, you must delete any notice of this special exception
dnl to the GPL from your modified version.
dnl
dnl Written by David MacKenzie, with help from
dnl Franc,ois Pinard, Karl Berry, Richard Pixley, Ian Lance Taylor,
dnl Roland McGrath, Noah Friedman, david d zuhn, and many others.
dnl
dnl Changed by Bruno Haible, 18 January 1999
dnl
divert(-1)dnl Throw away output until AC_INIT is called.
changequote([, ])
define(AC_ACVERSION, 2.13)
dnl Some old m4's don't support m4exit. But they provide
dnl equivalent functionality by core dumping because of the
dnl long macros we define.
ifdef([__gnu__], , [errprint(Autoconf requires GNU m4.
Install it before installing Autoconf or set the
M4 environment variable to its path name.
)m4exit(2)])
undefine([eval])
undefine([include])
undefine([shift])
undefine([format])
dnl ### Defining macros
dnl m4 output diversions. We let m4 output them all in order at the end,
dnl except that we explicitly undivert AC_DIVERSION_SED, AC_DIVERSION_CMDS,
dnl and AC_DIVERSION_ICMDS.
dnl AC_DIVERSION_NOTICE - 1 (= 0) AC_REQUIRE'd #! /bin/sh line
define(AC_DIVERSION_NOTICE, 1)dnl copyright notice & option help strings
define(AC_DIVERSION_INIT, 2)dnl initialization code
define(AC_DIVERSION_NORMAL_4, 3)dnl AC_REQUIRE'd code, 4 level deep
define(AC_DIVERSION_NORMAL_3, 4)dnl AC_REQUIRE'd code, 3 level deep
define(AC_DIVERSION_NORMAL_2, 5)dnl AC_REQUIRE'd code, 2 level deep
define(AC_DIVERSION_NORMAL_1, 6)dnl AC_REQUIRE'd code, 1 level deep
define(AC_DIVERSION_NORMAL, 7)dnl the tests and output code
define(AC_DIVERSION_SED, 8)dnl variable substitutions in config.status
define(AC_DIVERSION_CMDS, 9)dnl extra shell commands in config.status
define(AC_DIVERSION_ICMDS, 10)dnl extra initialization in config.status
dnl Change the diversion stream to STREAM, while stacking old values.
dnl AC_DIVERT_PUSH(STREAM)
define(AC_DIVERT_PUSH,
[pushdef([AC_DIVERSION_CURRENT], $1)dnl
divert(AC_DIVERSION_CURRENT)dnl
])
dnl Change the diversion stream to its previous value, unstacking it.
dnl AC_DIVERT_POP()
define(AC_DIVERT_POP,
[popdef([AC_DIVERSION_CURRENT])dnl
divert(AC_DIVERSION_CURRENT)dnl
])
dnl Initialize the diversion setup.
define([AC_DIVERSION_CURRENT], AC_DIVERSION_NORMAL)
dnl This will be popped by AC_REQUIRE in AC_INIT.
pushdef([AC_DIVERSION_CURRENT], AC_DIVERSION_NOTICE)
dnl The prologue for Autoconf macros.
dnl AC_PRO(MACRO-NAME)
define(AC_PRO,
[define([AC_PROVIDE_$1], )dnl
ifelse(AC_DIVERSION_CURRENT, AC_DIVERSION_NORMAL,
[AC_DIVERT_PUSH(builtin(eval, AC_DIVERSION_CURRENT - 1))],
[pushdef([AC_DIVERSION_CURRENT], AC_DIVERSION_CURRENT)])dnl
])
dnl The Epilogue for Autoconf macros.
dnl AC_EPI()
define(AC_EPI,
[AC_DIVERT_POP()dnl
ifelse(AC_DIVERSION_CURRENT, AC_DIVERSION_NORMAL,
[undivert(AC_DIVERSION_NORMAL_4)dnl
undivert(AC_DIVERSION_NORMAL_3)dnl
undivert(AC_DIVERSION_NORMAL_2)dnl
undivert(AC_DIVERSION_NORMAL_1)dnl
])dnl
])
dnl Define a macro which automatically provides itself. Add machinery
dnl so the macro automatically switches expansion to the diversion
dnl stack if it is not already using it. In this case, once finished,
dnl it will bring back all the code accumulated in the diversion stack.
dnl This, combined with AC_REQUIRE, achieves the topological ordering of
dnl macros. We don't use this macro to define some frequently called
dnl macros that are not involved in ordering constraints, to save m4
dnl processing.
dnl AC_DEFUN(NAME, EXPANSION)
define([AC_DEFUN],
[define($1, [AC_PRO([$1])$2[]AC_EPI()])])
dnl ### Initialization
dnl AC_INIT_NOTICE()
AC_DEFUN(AC_INIT_NOTICE,
[# Guess values for system-dependent variables and create Makefiles.
# Generated automatically using autoconf version] AC_ACVERSION [
# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
#
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.
# Defaults:
ac_help=
ac_default_prefix=/usr/local
[#] Any additions from configure.in:])
dnl AC_PREFIX_DEFAULT(PREFIX)
AC_DEFUN(AC_PREFIX_DEFAULT,
[AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)dnl
ac_default_prefix=$1
AC_DIVERT_POP()])
dnl AC_INIT_PARSE_ARGS()
AC_DEFUN(AC_INIT_PARSE_ARGS,
[
# Initialize some variables set by options.
# The variables have the same names as the options, with
# dashes changed to underlines.
build=NONE
cache_file=./config.cache
exec_prefix=NONE
host=NONE
no_create=
nonopt=NONE
no_recursion=
prefix=NONE
program_prefix=NONE
program_suffix=NONE
program_transform_name=s,x,x,
silent=
site=
srcdir=
target=NONE
verbose=
x_includes=NONE
x_libraries=NONE
dnl Installation directory options.
dnl These are left unexpanded so users can "make install exec_prefix=/foo"
dnl and all the variables that are supposed to be based on exec_prefix
dnl by default will actually change.
dnl Use braces instead of parens because sh, perl, etc. also accept them.
bindir='${exec_prefix}/bin'
sbindir='${exec_prefix}/sbin'
libexecdir='${exec_prefix}/libexec'
datadir='${prefix}/share'
sysconfdir='${prefix}/etc'
sharedstatedir='${prefix}/com'
localstatedir='${prefix}/var'
libdir='${exec_prefix}/lib'
includedir='${prefix}/include'
oldincludedir='/usr/include'
infodir='${prefix}/info'
mandir='${prefix}/man'
# Initialize some other variables.
subdirs=
MFLAGS= MAKEFLAGS=
SHELL=${CONFIG_SHELL-/bin/sh}
# Maximum number of lines to put in a shell here document.
ac_max_here_lines=12
ac_prev=
for ac_option
do
# If the previous option needs an argument, assign it.
if test -n "$ac_prev"; then
eval "$ac_prev=\$ac_option"
ac_prev=
continue
fi
case "$ac_option" in
changequote(, )dnl
-*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
changequote([, ])dnl
*) ac_optarg= ;;
esac
# Accept the important Cygnus configure options, so we can diagnose typos.
case "$ac_option" in
-bindir | --bindir | --bindi | --bind | --bin | --bi)
ac_prev=bindir ;;
-bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
bindir="$ac_optarg" ;;
-build | --build | --buil | --bui | --bu)
ac_prev=build ;;
-build=* | --build=* | --buil=* | --bui=* | --bu=*)
build="$ac_optarg" ;;
-cache-file | --cache-file | --cache-fil | --cache-fi \
| --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
ac_prev=cache_file ;;
-cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
| --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
cache_file="$ac_optarg" ;;
-datadir | --datadir | --datadi | --datad | --data | --dat | --da)
ac_prev=datadir ;;
-datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
| --da=*)
datadir="$ac_optarg" ;;
-disable-* | --disable-*)
ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
# Reject names that are not valid shell variable names.
changequote(, )dnl
if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
changequote([, ])dnl
AC_MSG_ERROR($ac_feature: invalid feature name)
fi
ac_feature=`echo $ac_feature| sed 's/-/_/g'`
eval "enable_${ac_feature}=no" ;;
-enable-* | --enable-*)
ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
# Reject names that are not valid shell variable names.
changequote(, )dnl
if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
changequote([, ])dnl
AC_MSG_ERROR($ac_feature: invalid feature name)
fi
ac_feature=`echo $ac_feature| sed 's/-/_/g'`
case "$ac_option" in
*=*) ;;
*) ac_optarg=yes ;;
esac
eval "enable_${ac_feature}='$ac_optarg'" ;;
-exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
| --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
| --exec | --exe | --ex)
ac_prev=exec_prefix ;;
-exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
| --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
| --exec=* | --exe=* | --ex=*)
exec_prefix="$ac_optarg" ;;
-gas | --gas | --ga | --g)
# Obsolete; use --with-gas.
with_gas=yes ;;
-help | --help | --hel | --he)
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat << EOF
changequote(, )dnl
Usage: configure [options] [host]
Options: [defaults in brackets after descriptions]
Configuration:
--cache-file=FILE cache test results in FILE
--help print this message
--no-create do not create output files
--quiet, --silent do not print \`checking...' messages
--version print the version of autoconf that created configure
Directory and file names:
--prefix=PREFIX install architecture-independent files in PREFIX
[$ac_default_prefix]
--exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
[same as prefix]
--bindir=DIR user executables in DIR [EPREFIX/bin]
--sbindir=DIR system admin executables in DIR [EPREFIX/sbin]
--libexecdir=DIR program executables in DIR [EPREFIX/libexec]
--datadir=DIR read-only architecture-independent data in DIR
[PREFIX/share]
--sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc]
--sharedstatedir=DIR modifiable architecture-independent data in DIR
[PREFIX/com]
--localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var]
--libdir=DIR object code libraries in DIR [EPREFIX/lib]
--includedir=DIR C header files in DIR [PREFIX/include]
--oldincludedir=DIR C header files for non-gcc in DIR [/usr/include]
--infodir=DIR info documentation in DIR [PREFIX/info]
--mandir=DIR man documentation in DIR [PREFIX/man]
--srcdir=DIR find the sources in DIR [configure dir or ..]
--program-prefix=PREFIX prepend PREFIX to installed program names
--program-suffix=SUFFIX append SUFFIX to installed program names
--program-transform-name=PROGRAM
run sed PROGRAM on installed program names
EOF
cat << EOF
Host type:
--build=BUILD configure for building on BUILD [BUILD=HOST]
--host=HOST configure for HOST [guessed]
--target=TARGET configure for TARGET [TARGET=HOST]
Features and packages:
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
--x-includes=DIR X include files are in DIR
--x-libraries=DIR X library files are in DIR
changequote([, ])dnl
EOF
if test -n "$ac_help"; then
echo "--enable and --with options recognized:$ac_help"
fi
exit 0 ;;
-host | --host | --hos | --ho)
ac_prev=host ;;
-host=* | --host=* | --hos=* | --ho=*)
host="$ac_optarg" ;;
-includedir | --includedir | --includedi | --included | --include \
| --includ | --inclu | --incl | --inc)
ac_prev=includedir ;;
-includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
| --includ=* | --inclu=* | --incl=* | --inc=*)
includedir="$ac_optarg" ;;
-infodir | --infodir | --infodi | --infod | --info | --inf)
ac_prev=infodir ;;
-infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
infodir="$ac_optarg" ;;
-libdir | --libdir | --libdi | --libd)
ac_prev=libdir ;;
-libdir=* | --libdir=* | --libdi=* | --libd=*)
libdir="$ac_optarg" ;;
-libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
| --libexe | --libex | --libe)
ac_prev=libexecdir ;;
-libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
| --libexe=* | --libex=* | --libe=*)
libexecdir="$ac_optarg" ;;
-localstatedir | --localstatedir | --localstatedi | --localstated \
| --localstate | --localstat | --localsta | --localst \
| --locals | --local | --loca | --loc | --lo)
ac_prev=localstatedir ;;
-localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
| --localstate=* | --localstat=* | --localsta=* | --localst=* \
| --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
localstatedir="$ac_optarg" ;;
-mandir | --mandir | --mandi | --mand | --man | --ma | --m)
ac_prev=mandir ;;
-mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
mandir="$ac_optarg" ;;
-nfp | --nfp | --nf)
# Obsolete; use --without-fp.
with_fp=no ;;
-no-create | --no-create | --no-creat | --no-crea | --no-cre \
| --no-cr | --no-c)
no_create=yes ;;
-no-recursion | --no-recursion | --no-recursio | --no-recursi \
| --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
no_recursion=yes ;;
-oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
| --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
| --oldin | --oldi | --old | --ol | --o)
ac_prev=oldincludedir ;;
-oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
| --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
| --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
oldincludedir="$ac_optarg" ;;
-prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
ac_prev=prefix ;;
-prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
prefix="$ac_optarg" ;;
-program-prefix | --program-prefix | --program-prefi | --program-pref \
| --program-pre | --program-pr | --program-p)
ac_prev=program_prefix ;;
-program-prefix=* | --program-prefix=* | --program-prefi=* \
| --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
program_prefix="$ac_optarg" ;;
-program-suffix | --program-suffix | --program-suffi | --program-suff \
| --program-suf | --program-su | --program-s)
ac_prev=program_suffix ;;
-program-suffix=* | --program-suffix=* | --program-suffi=* \
| --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
program_suffix="$ac_optarg" ;;
-program-transform-name | --program-transform-name \
| --program-transform-nam | --program-transform-na \
| --program-transform-n | --program-transform- \
| --program-transform | --program-transfor \
| --program-transfo | --program-transf \
| --program-trans | --program-tran \
| --progr-tra | --program-tr | --program-t)
ac_prev=program_transform_name ;;
-program-transform-name=* | --program-transform-name=* \
| --program-transform-nam=* | --program-transform-na=* \
| --program-transform-n=* | --program-transform-=* \
| --program-transform=* | --program-transfor=* \
| --program-transfo=* | --program-transf=* \
| --program-trans=* | --program-tran=* \
| --progr-tra=* | --program-tr=* | --program-t=*)
program_transform_name="$ac_optarg" ;;
-q | -quiet | --quiet | --quie | --qui | --qu | --q \
| -silent | --silent | --silen | --sile | --sil)
silent=yes ;;
-sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
ac_prev=sbindir ;;
-sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
| --sbi=* | --sb=*)
sbindir="$ac_optarg" ;;
-sharedstatedir | --sharedstatedir | --sharedstatedi \
| --sharedstated | --sharedstate | --sharedstat | --sharedsta \
| --sharedst | --shareds | --shared | --share | --shar \
| --sha | --sh)
ac_prev=sharedstatedir ;;
-sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
| --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
| --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
| --sha=* | --sh=*)
sharedstatedir="$ac_optarg" ;;
-site | --site | --sit)
ac_prev=site ;;
-site=* | --site=* | --sit=*)
site="$ac_optarg" ;;
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
ac_prev=srcdir ;;
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
srcdir="$ac_optarg" ;;
-sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
| --syscon | --sysco | --sysc | --sys | --sy)
ac_prev=sysconfdir ;;
-sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
| --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
sysconfdir="$ac_optarg" ;;
-target | --target | --targe | --targ | --tar | --ta | --t)
ac_prev=target ;;
-target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
target="$ac_optarg" ;;
-v | -verbose | --verbose | --verbos | --verbo | --verb)
verbose=yes ;;
-version | --version | --versio | --versi | --vers)
echo "configure generated by autoconf version AC_ACVERSION"
exit 0 ;;
-with-* | --with-*)
ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
# Reject names that are not valid shell variable names.
changequote(, )dnl
if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
changequote([, ])dnl
AC_MSG_ERROR($ac_package: invalid package name)
fi
ac_package=`echo $ac_package| sed 's/-/_/g'`
case "$ac_option" in
*=*) ;;
*) ac_optarg=yes ;;
esac
eval "with_${ac_package}='$ac_optarg'" ;;
-without-* | --without-*)
ac_package=`echo $ac_option|sed -e 's/-*without-//'`
# Reject names that are not valid shell variable names.
changequote(, )dnl
if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
changequote([, ])dnl
AC_MSG_ERROR($ac_package: invalid package name)
fi
ac_package=`echo $ac_package| sed 's/-/_/g'`
eval "with_${ac_package}=no" ;;
--x)
# Obsolete; use --with-x.
with_x=yes ;;
-x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
| --x-incl | --x-inc | --x-in | --x-i)
ac_prev=x_includes ;;
-x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
| --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
x_includes="$ac_optarg" ;;
-x-libraries | --x-libraries | --x-librarie | --x-librari \
| --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
ac_prev=x_libraries ;;
-x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
| --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
x_libraries="$ac_optarg" ;;
-*) AC_MSG_ERROR([$ac_option: invalid option; use --help to show usage])
;;
*)
changequote(, )dnl
if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
changequote([, ])dnl
AC_MSG_WARN($ac_option: invalid host type)
fi
if test "x$nonopt" != xNONE; then
AC_MSG_ERROR(can only configure for one host and one target at a time)
fi
nonopt="$ac_option"
;;
esac
done
if test -n "$ac_prev"; then
AC_MSG_ERROR(missing argument to --`echo $ac_prev | sed 's/_/-/g'`)
fi
])
dnl Try to have only one #! line, so the script doesn't look funny
dnl for users of AC_REVISION.
dnl AC_INIT_BINSH()
AC_DEFUN(AC_INIT_BINSH,
[#! /bin/sh
])
dnl AC_INIT(UNIQUE-FILE-IN-SOURCE-DIR)
AC_DEFUN(AC_INIT,
[sinclude(acsite.m4)dnl
sinclude(./aclocal.m4)dnl
AC_REQUIRE([AC_INIT_BINSH])dnl
AC_INIT_NOTICE
AC_DIVERT_POP()dnl to NORMAL
AC_DIVERT_PUSH(AC_DIVERSION_INIT)dnl
AC_INIT_PARSE_ARGS
AC_INIT_PREPARE($1)dnl
AC_DIVERT_POP()dnl to NORMAL
])
dnl AC_INIT_PREPARE(UNIQUE-FILE-IN-SOURCE-DIR)
AC_DEFUN(AC_INIT_PREPARE,
[trap 'rm -fr conftest* confdefs* core $ac_clean_files; exit 1' 1 2 15
# File descriptor usage:
# 0 standard input
# 1 file creation
# 2 errors and warnings
# 3 some systems may open it to /dev/tty
# 4 used on the Kubota Titan
define(AC_FD_MSG, 6)dnl
[#] AC_FD_MSG checking for... messages and results
define(AC_FD_CC, 5)dnl
[#] AC_FD_CC compiler messages saved in config.log
if test "$silent" = yes; then
exec AC_FD_MSG>/dev/null
else
exec AC_FD_MSG>&1
fi
exec AC_FD_CC>./config.log
echo "\
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
" 1>&AC_FD_CC
# Strip out --no-create and --no-recursion so they do not pile up.
# Also quote any args containing shell metacharacters.
ac_configure_args=
for ac_arg
do
case "$ac_arg" in
-no-create | --no-create | --no-creat | --no-crea | --no-cre \
| --no-cr | --no-c) ;;
-no-recursion | --no-recursion | --no-recursio | --no-recursi \
| --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
changequote(<<, >>)dnl
dnl If you change this globbing pattern, test it on an old shell --
dnl it's sensitive. Putting any kind of quote in it causes syntax errors.
*" "*|*" "*|*[\[\]\~\<<#>>\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
ac_configure_args="$ac_configure_args '$ac_arg'" ;;
changequote([, ])dnl
*) ac_configure_args="$ac_configure_args $ac_arg" ;;
esac
done
# NLS nuisances.
# Only set these to C if already set. These must not be set unconditionally
# because not all systems understand e.g. LANG=C (notably SCO).
# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
# Non-C LC_CTYPE values break the ctype check.
if test "${LANG+set}" = set; then LANG=C; export LANG; fi
if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi
# confdefs.h avoids OS command line length limits that DEFS can exceed.
rm -rf conftest* confdefs.h
# AIX cpp loses on an empty file, so make sure it contains at least a newline.
echo > confdefs.h
# A filename unique to this package, relative to the directory that
# configure is in, which we can look for to find out if srcdir is correct.
ac_unique_file=$1
# Find the source files, if location was not specified.
if test -z "$srcdir"; then
ac_srcdir_defaulted=yes
# Try the directory containing this script, then its parent.
ac_prog=[$]0
changequote(, )dnl
ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
changequote([, ])dnl
test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
srcdir=$ac_confdir
if test ! -r $srcdir/$ac_unique_file; then
srcdir=..
fi
else
ac_srcdir_defaulted=no
fi
if test ! -r $srcdir/$ac_unique_file; then
if test "$ac_srcdir_defaulted" = yes; then
AC_MSG_ERROR(can not find sources in $ac_confdir or ..)
else
AC_MSG_ERROR(can not find sources in $srcdir)
fi
fi
dnl Double slashes in pathnames in object file debugging info
dnl mess up M-x gdb in Emacs.
changequote(, )dnl
srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
changequote([, ])dnl
dnl Let the site file select an alternate cache file if it wants to.
AC_SITE_LOAD
AC_CACHE_LOAD
AC_LANG_C
dnl By default always use an empty string as the executable
dnl extension. Only change it if the script calls AC_EXEEXT.
ac_exeext=
dnl By default assume that objects files use an extension of .o. Only
dnl change it if the script calls AC_OBJEXT.
ac_objext=o
AC_PROG_ECHO_N
dnl Substitute for predefined variables.
AC_SUBST(SHELL)dnl
AC_SUBST(CFLAGS)dnl
AC_SUBST(CPPFLAGS)dnl
AC_SUBST(CXXFLAGS)dnl
AC_SUBST(FFLAGS)dnl
AC_SUBST(DEFS)dnl
AC_SUBST(LDFLAGS)dnl
AC_SUBST(LIBS)dnl
AC_SUBST(exec_prefix)dnl
AC_SUBST(prefix)dnl
AC_SUBST(program_transform_name)dnl
dnl Installation directory options.
AC_SUBST(bindir)dnl
AC_SUBST(sbindir)dnl
AC_SUBST(libexecdir)dnl
AC_SUBST(datadir)dnl
AC_SUBST(sysconfdir)dnl
AC_SUBST(sharedstatedir)dnl
AC_SUBST(localstatedir)dnl
AC_SUBST(libdir)dnl
AC_SUBST(includedir)dnl
AC_SUBST(oldincludedir)dnl
AC_SUBST(infodir)dnl
AC_SUBST(mandir)dnl
])
dnl ### Selecting optional features
dnl AC_ARG_ENABLE(FEATURE, HELP-STRING, ACTION-IF-TRUE [, ACTION-IF-FALSE])
AC_DEFUN(AC_ARG_ENABLE,
[AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)dnl
ac_help="$ac_help
[$2]"
AC_DIVERT_POP()dnl
[#] Check whether --enable-[$1] or --disable-[$1] was given.
if test "[${enable_]patsubst([$1], -, _)+set}" = set; then
enableval="[$enable_]patsubst([$1], -, _)"
ifelse([$3], , :, [$3])
ifelse([$4], , , [else
$4
])dnl
fi
])
AC_DEFUN(AC_ENABLE,
[AC_OBSOLETE([$0], [; instead use AC_ARG_ENABLE])dnl
AC_ARG_ENABLE([$1], [ --enable-$1], [$2], [$3])dnl
])
dnl ### Working with optional software
dnl AC_ARG_WITH(PACKAGE, HELP-STRING, ACTION-IF-TRUE [, ACTION-IF-FALSE])
AC_DEFUN(AC_ARG_WITH,
[AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)dnl
ac_help="$ac_help
[$2]"
AC_DIVERT_POP()dnl
[#] Check whether --with-[$1] or --without-[$1] was given.
if test "[${with_]patsubst([$1], -, _)+set}" = set; then
withval="[$with_]patsubst([$1], -, _)"
ifelse([$3], , :, [$3])
ifelse([$4], , , [else
$4
])dnl
fi
])
AC_DEFUN(AC_WITH,
[AC_OBSOLETE([$0], [; instead use AC_ARG_WITH])dnl
AC_ARG_WITH([$1], [ --with-$1], [$2], [$3])dnl
])
dnl ### Transforming program names.
dnl AC_ARG_PROGRAM()
AC_DEFUN(AC_ARG_PROGRAM,
[if test "$program_transform_name" = s,x,x,; then
program_transform_name=
else
# Double any \ or $. echo might interpret backslashes.
cat <<\EOF_SED > conftestsed
s,\\,\\\\,g; s,\$,$$,g
EOF_SED
program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
rm -f conftestsed
fi
test "$program_prefix" != NONE &&
program_transform_name="s,^,${program_prefix},; $program_transform_name"
# Use a double $ so make ignores it.
test "$program_suffix" != NONE &&
program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
# sed with no file args requires a program.
test "$program_transform_name" = "" && program_transform_name="s,x,x,"
])
dnl ### Version numbers
dnl AC_REVISION(REVISION-INFO)
AC_DEFUN(AC_REVISION,
[AC_REQUIRE([AC_INIT_BINSH])dnl
[# From configure.in] translit([$1], $")])
dnl Subroutines of AC_PREREQ.
dnl Change the dots in NUMBER into commas.
dnl AC_PREREQ_SPLIT(NUMBER)
define(AC_PREREQ_SPLIT,
[translit($1, ., [, ])])
dnl Default the ternary version number to 0 (e.g., 1, 7 -> 1, 7, 0).
dnl AC_PREREQ_CANON(MAJOR, MINOR [,TERNARY])
define(AC_PREREQ_CANON,
[$1, $2, ifelse([$3], , 0, [$3])])
dnl Complain and exit if version number 1 is less than version number 2.
dnl PRINTABLE2 is the printable version of version number 2.
dnl AC_PREREQ_COMPARE(MAJOR1, MINOR1, TERNARY1, MAJOR2, MINOR2, TERNARY2,
dnl PRINTABLE2)
define(AC_PREREQ_COMPARE,
[ifelse(builtin([eval],
[$3 + $2 * 1000 + $1 * 1000000 < $6 + $5 * 1000 + $4 * 1000000]), 1,
[errprint(dnl
FATAL ERROR: Autoconf version $7 or higher is required for this script
)m4exit(3)])])
dnl Complain and exit if the Autoconf version is less than VERSION.
dnl AC_PREREQ(VERSION)
define(AC_PREREQ,
[AC_PREREQ_COMPARE(AC_PREREQ_CANON(AC_PREREQ_SPLIT(AC_ACVERSION)),
AC_PREREQ_CANON(AC_PREREQ_SPLIT([$1])), [$1])])
dnl ### Getting the canonical system type
dnl Find install-sh, config.sub, config.guess, and Cygnus configure
dnl in directory DIR. These are auxiliary files used in configuration.
dnl DIR can be either absolute or relative to $srcdir.
dnl AC_CONFIG_AUX_DIR(DIR)
AC_DEFUN(AC_CONFIG_AUX_DIR,
[AC_CONFIG_AUX_DIRS($1 $srcdir/$1)])
dnl The default is `$srcdir' or `$srcdir/..' or `$srcdir/../..'.
dnl There's no need to call this macro explicitly; just AC_REQUIRE it.
AC_DEFUN(AC_CONFIG_AUX_DIR_DEFAULT,
[AC_CONFIG_AUX_DIRS($srcdir $srcdir/.. $srcdir/../..)])
dnl Internal subroutine.
dnl Search for the configuration auxiliary files in directory list $1.
dnl We look only for install-sh, so users of AC_PROG_INSTALL
dnl do not automatically need to distribute the other auxiliary files.
dnl AC_CONFIG_AUX_DIRS(DIR ...)
AC_DEFUN(AC_CONFIG_AUX_DIRS,
[ac_aux_dir=
for ac_dir in $1; do
if test -f $ac_dir/install-sh; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install-sh -c"
break
elif test -f $ac_dir/install.sh; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install.sh -c"
break
fi
done
if test -z "$ac_aux_dir"; then
AC_MSG_ERROR([can not find install-sh or install.sh in $1])
fi
ac_config_guess=$ac_aux_dir/config.guess
ac_config_sub=$ac_aux_dir/config.sub
ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
AC_PROVIDE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
])
dnl Canonicalize the host, target, and build system types.
AC_DEFUN(AC_CANONICAL_SYSTEM,
[AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
AC_BEFORE([$0], [AC_ARG_PROGRAM])
# Do some error checking and defaulting for the host and target type.
# The inputs are:
# configure --host=HOST --target=TARGET --build=BUILD NONOPT
#
# The rules are:
# 1. You are not allowed to specify --host, --target, and nonopt at the
# same time.
# 2. Host defaults to nonopt.
# 3. If nonopt is not specified, then host defaults to the current host,
# as determined by config.guess.
# 4. Target and build default to nonopt.
# 5. If nonopt is not specified, then target and build default to host.
# The aliases save the names the user supplied, while $host etc.
# will get canonicalized.
case $host---$target---$nonopt in
NONE---*---* | *---NONE---* | *---*---NONE) ;;
*) AC_MSG_ERROR(can only configure for one host and one target at a time) ;;
esac
AC_CANONICAL_HOST
AC_CANONICAL_TARGET
AC_CANONICAL_BUILD
test "$host_alias" != "$target_alias" &&
test "$program_prefix$program_suffix$program_transform_name" = \
NONENONEs,x,x, &&
program_prefix=${target_alias}-
])
dnl Subroutines of AC_CANONICAL_SYSTEM.
AC_DEFUN(AC_CANONICAL_HOST,
[AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
# Make sure we can run config.sub.
if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
else AC_MSG_ERROR(can not run $ac_config_sub)
fi
AC_MSG_CHECKING(host system type)
dnl Set host_alias.
host_alias=$host
case "$host_alias" in
NONE)
case $nonopt in
NONE)
if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
else AC_MSG_ERROR(can not guess host type; you must specify one)
fi ;;
*) host_alias=$nonopt ;;
esac ;;
esac
dnl Set the other host vars.
changequote(<<, >>)dnl
host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
changequote([, ])dnl
AC_MSG_RESULT($host)
AC_SUBST(host)dnl
AC_SUBST(host_alias)dnl
AC_SUBST(host_cpu)dnl
AC_SUBST(host_vendor)dnl
AC_SUBST(host_os)dnl
])
dnl Internal use only.
AC_DEFUN(AC_CANONICAL_TARGET,
[AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
AC_MSG_CHECKING(target system type)
dnl Set target_alias.
target_alias=$target
case "$target_alias" in
NONE)
case $nonopt in
NONE) target_alias=$host_alias ;;
*) target_alias=$nonopt ;;
esac ;;
esac
dnl Set the other target vars.
changequote(<<, >>)dnl
target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
changequote([, ])dnl
AC_MSG_RESULT($target)
AC_SUBST(target)dnl
AC_SUBST(target_alias)dnl
AC_SUBST(target_cpu)dnl
AC_SUBST(target_vendor)dnl
AC_SUBST(target_os)dnl
])
dnl Internal use only.
AC_DEFUN(AC_CANONICAL_BUILD,
[AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
AC_MSG_CHECKING(build system type)
dnl Set build_alias.
build_alias=$build
case "$build_alias" in
NONE)
case $nonopt in
NONE) build_alias=$host_alias ;;
*) build_alias=$nonopt ;;
esac ;;
esac
dnl Set the other build vars.
changequote(<<, >>)dnl
build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
changequote([, ])dnl
AC_MSG_RESULT($build)
AC_SUBST(build)dnl
AC_SUBST(build_alias)dnl
AC_SUBST(build_cpu)dnl
AC_SUBST(build_vendor)dnl
AC_SUBST(build_os)dnl
])
dnl AC_VALIDATE_CACHED_SYSTEM_TUPLE[(cmd)]
dnl if the cache file is inconsistent with the current host,
dnl target and build system types, execute CMD or print a default
dnl error message.
AC_DEFUN(AC_VALIDATE_CACHED_SYSTEM_TUPLE, [
AC_REQUIRE([AC_CANONICAL_SYSTEM])
AC_MSG_CHECKING([cached system tuple])
if { test x"${ac_cv_host_system_type+set}" = x"set" &&
test x"$ac_cv_host_system_type" != x"$host"; } ||
{ test x"${ac_cv_build_system_type+set}" = x"set" &&
test x"$ac_cv_build_system_type" != x"$build"; } ||
{ test x"${ac_cv_target_system_type+set}" = x"set" &&
test x"$ac_cv_target_system_type" != x"$target"; }; then
AC_MSG_RESULT([different])
ifelse($#, 1, [$1],
[AC_MSG_ERROR([remove config.cache and re-run configure])])
else
AC_MSG_RESULT(ok)
fi
ac_cv_host_system_type="$host"
ac_cv_build_system_type="$build"
ac_cv_target_system_type="$target"
])
dnl ### Caching test results
dnl Look for site or system specific initialization scripts.
dnl AC_SITE_LOAD()
define(AC_SITE_LOAD,
[# Prefer explicitly selected file to automatically selected ones.
if test -z "$CONFIG_SITE"; then
if test "x$prefix" != xNONE; then
CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
else
CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
fi
fi
for ac_site_file in $CONFIG_SITE; do
if test -r "$ac_site_file"; then
echo "loading site script $ac_site_file"
. "$ac_site_file"
fi
done
])
dnl AC_CACHE_LOAD()
define(AC_CACHE_LOAD,
[if test -r "$cache_file"; then
echo "loading cache $cache_file"
. $cache_file
else
echo "creating cache $cache_file"
> $cache_file
fi
])
dnl AC_CACHE_SAVE()
define(AC_CACHE_SAVE,
[cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
# scripts and configure runs. It is not useful on other systems.
# If it contains results you don't want to keep, you may remove or edit it.
#
# By default, configure uses ./config.cache as the cache file,
# creating it if it does not exist already. You can give configure
# the --cache-file=FILE option to use a different cache file; that is
# what configure does when it calls configure scripts in
# subdirectories, so they share the cache.
# Giving --cache-file=/dev/null disables caching, for debugging configure.
# config.status only pays attention to the cache file if you give it the
# --recheck option to rerun configure.
#
EOF
dnl Allow a site initialization script to override cache values.
# The following way of writing the cache mishandles newlines in values,
# but we know of no workaround that is simple, portable, and efficient.
# So, don't put newlines in cache variables' values.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
changequote(, )dnl
(set) 2>&1 |
case `(ac_space=' '; set | grep ac_space) 2>&1` in
*ac_space=\ *)
# `set' does not quote correctly, so add quotes (double-quote substitution
# turns \\\\ into \\, and sed turns \\ into \).
sed -n \
-e "s/'/'\\\\''/g" \
-e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
;;
*)
# `set' quotes correctly as required by POSIX, so do not add quotes.
sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
;;
esac >> confcache
changequote([, ])dnl
if cmp -s $cache_file confcache; then
:
else
if test -w $cache_file; then
echo "updating cache $cache_file"
cat confcache > $cache_file
else
echo "not updating unwritable cache $cache_file"
fi
fi
rm -f confcache
])
dnl The name of shell var CACHE-ID must contain `_cv_' in order to get saved.
dnl AC_CACHE_VAL(CACHE-ID, COMMANDS-TO-SET-IT)
define(AC_CACHE_VAL,
[dnl We used to use the below line, but it fails if the 1st arg is a
dnl shell variable, so we need the eval.
dnl if test "${$1+set}" = set; then
dnl the '' avoids an AIX 4.1 sh bug ("invalid expansion").
if eval "test \"`echo '$''{'$1'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&AC_FD_MSG
else
$2
fi
])
dnl AC_CACHE_CHECK(MESSAGE, CACHE-ID, COMMANDS)
define(AC_CACHE_CHECK,
[AC_MSG_CHECKING([$1])
AC_CACHE_VAL([$2], [$3])dnl
AC_MSG_RESULT([$]$2)])
dnl ### Defining symbols
dnl Set VARIABLE to VALUE, verbatim, or 1.
dnl AC_DEFINE(VARIABLE [, VALUE])
define(AC_DEFINE,
[cat >> confdefs.h <<\EOF
[#define] $1 ifelse($#, 2, [$2], $#, 3, [$2], 1)
EOF
])
dnl Similar, but perform shell substitutions $ ` \ once on VALUE.
define(AC_DEFINE_UNQUOTED,
[cat >> confdefs.h <<EOF
[#define] $1 ifelse($#, 2, [$2], $#, 3, [$2], 1)
EOF
])
dnl ### Setting output variables
dnl This macro protects VARIABLE from being diverted twice
dnl if this macro is called twice for it.
dnl AC_SUBST(VARIABLE)
define(AC_SUBST,
[ifdef([AC_SUBST_$1], ,
[define([AC_SUBST_$1], )dnl
AC_DIVERT_PUSH(AC_DIVERSION_SED)dnl
s%@$1@%[$]$1%g
AC_DIVERT_POP()dnl
])])
dnl AC_SUBST_FILE(VARIABLE)
define(AC_SUBST_FILE,
[ifdef([AC_SUBST_$1], ,
[define([AC_SUBST_$1], )dnl
AC_DIVERT_PUSH(AC_DIVERSION_SED)dnl
/@$1@/r [$]$1
s%@$1@%%g
AC_DIVERT_POP()dnl
])])
dnl ### Printing messages
dnl AC_MSG_CHECKING(FEATURE-DESCRIPTION)
define(AC_MSG_CHECKING,
[echo $ac_n "checking $1""... $ac_c" 1>&AC_FD_MSG
echo "configure:__oline__: checking $1" >&AC_FD_CC])
dnl AC_CHECKING(FEATURE-DESCRIPTION)
define(AC_CHECKING,
[echo "checking $1" 1>&AC_FD_MSG
echo "configure:__oline__: checking $1" >&AC_FD_CC])
dnl AC_MSG_RESULT(RESULT-DESCRIPTION)
define(AC_MSG_RESULT,
[echo "$ac_t""$1" 1>&AC_FD_MSG])
dnl AC_MSG_RESULTPROTO(RESULT-PROTOTYPE-DESCRIPTION)
define(AC_MSG_RESULTPROTO,
[AC_MSG_RESULT(${ac_tt}[$1])
dnl ac_proto=`echo "$1" | tr -s ' '`
dnl AC_MSG_RESULT(${ac_tt}${ac_proto})
])
dnl AC_VERBOSE(RESULT-DESCRIPTION)
define(AC_VERBOSE,
[AC_OBSOLETE([$0], [; instead use AC_MSG_RESULT])dnl
echo " $1" 1>&AC_FD_MSG])
dnl AC_MSG_WARN(PROBLEM-DESCRIPTION)
define(AC_MSG_WARN,
[echo "configure: warning: $1" 1>&2])
dnl AC_MSG_ERROR(ERROR-DESCRIPTION)
define(AC_MSG_ERROR,
[{ echo "configure: error: $1" 1>&2; exit 1; }])
dnl ### Selecting which language to use for testing
dnl AC_LANG_C()
AC_DEFUN(AC_LANG_C,
[define([AC_LANG], [C])dnl
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&AC_FD_CC'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&AC_FD_CC'
cross_compiling=$ac_cv_prog_cc_cross
])
dnl AC_LANG_CPLUSPLUS()
AC_DEFUN(AC_LANG_CPLUSPLUS,
[define([AC_LANG], [CPLUSPLUS])dnl
ac_ext=C
# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&AC_FD_CC'
ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&AC_FD_CC'
cross_compiling=$ac_cv_prog_cxx_cross
])
dnl AC_LANG_FORTRAN77()
AC_DEFUN(AC_LANG_FORTRAN77,
[define([AC_LANG], [FORTRAN77])dnl
ac_ext=f
ac_compile='${F77-f77} -c $FFLAGS conftest.$ac_ext 1>&AC_FD_CC'
ac_link='${F77-f77} -o conftest${ac_exeext} $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&AC_FD_CC'
cross_compiling=$ac_cv_prog_f77_cross
])
dnl Push the current language on a stack.
dnl AC_LANG_SAVE()
define(AC_LANG_SAVE,
[pushdef([AC_LANG_STACK], AC_LANG)])
dnl Restore the current language from the stack.
dnl AC_LANG_RESTORE()
pushdef([AC_LANG_RESTORE],
[ifelse(AC_LANG_STACK, [C], [AC_LANG_C],dnl
AC_LANG_STACK, [CPLUSPLUS], [AC_LANG_CPLUSPLUS],dnl
AC_LANG_STACK, [FORTRAN77], [AC_LANG_FORTRAN77])[]popdef([AC_LANG_STACK])])
dnl Expands to the "extern ..." prefix used for system declarations.
dnl AC_LANG_EXTERN()
define(AC_LANG_EXTERN,
[extern
#ifdef __cplusplus
"C"
#endif
])
dnl ### Compiler-running mechanics
dnl The purpose of this macro is to "configure:123: command line"
dnl written into config.log for every test run.
dnl AC_TRY_EVAL(VARIABLE)
AC_DEFUN(AC_TRY_EVAL,
[{ (eval echo configure:__oline__: \"[$]$1\") 1>&AC_FD_CC; dnl
(eval [$]$1) 2>&AC_FD_CC; }])
dnl AC_TRY_COMMAND(COMMAND)
AC_DEFUN(AC_TRY_COMMAND,
[{ ac_try='$1'; AC_TRY_EVAL(ac_try); }])
dnl ### Dependencies between macros
dnl AC_BEFORE(THIS-MACRO-NAME, CALLED-MACRO-NAME)
define(AC_BEFORE,
[ifdef([AC_PROVIDE_$2], [errprint(__file__:__line__: [$2 was called before $1
])])])
dnl AC_REQUIRE(MACRO-NAME)
define(AC_REQUIRE,
[ifdef([AC_PROVIDE_$1], ,
[AC_DIVERT_PUSH(builtin(eval, AC_DIVERSION_CURRENT - 1))dnl
indir([$1])
AC_DIVERT_POP()dnl
])])
dnl AC_PROVIDE(MACRO-NAME)
define(AC_PROVIDE,
[define([AC_PROVIDE_$1], )])
dnl AC_OBSOLETE(THIS-MACRO-NAME [, SUGGESTION])
define(AC_OBSOLETE,
[errprint(__file__:__line__: warning: [$1] is obsolete[$2]
)])
dnl ### Checking for programs
dnl AC_CHECK_PROG(VARIABLE, PROG-TO-CHECK-FOR, VALUE-IF-FOUND
dnl [, [VALUE-IF-NOT-FOUND] [, [PATH] [, [REJECT]]]])
AC_DEFUN(AC_CHECK_PROG,
[# Extract the first word of "$2", so it can be a program name with args.
set dummy $2; ac_word=[$]2
AC_MSG_CHECKING([for $ac_word])
AC_CACHE_VAL(ac_cv_prog_$1,
[if test -n "[$]$1"; then
ac_cv_prog_$1="[$]$1" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ifelse([$6], , , [ ac_prog_rejected=no
])dnl
dnl $ac_dummy forces splitting on constant user-supplied paths.
dnl POSIX.2 word splitting is done only on the output of word expansions,
dnl not every word. This closes a longstanding sh security hole.
ac_dummy="ifelse([$5], , $PATH, [$5])"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ifelse([$6], , , dnl
[ if test "[$ac_dir/$ac_word]" = "$6"; then
ac_prog_rejected=yes
continue
fi
])dnl
ac_cv_prog_$1="$3"
break
fi
done
IFS="$ac_save_ifs"
ifelse([$6], , , [if test $ac_prog_rejected = yes; then
# We found a bogon in the path, so make sure we never use it.
set dummy [$]ac_cv_prog_$1
shift
if test [$]# -gt 0; then
# We chose a different compiler from the bogus one.
# However, it has the same basename, so the bogon will be chosen
# first if we set $1 to just the basename; use the full file name.
shift
set dummy "$ac_dir/$ac_word" "[$]@"
shift
ac_cv_prog_$1="[$]@"
ifelse([$2], [$4], dnl
[ else
# Default is a loser.
AC_MSG_ERROR([$1=$6 unacceptable, but no other $4 found in dnl
ifelse([$5], , [\$]PATH, [$5])])
])dnl
fi
fi
])dnl
dnl If no 4th arg is given, leave the cache variable unset,
dnl so AC_CHECK_PROGS will keep looking.
ifelse([$4], , , [ test -z "[$]ac_cv_prog_$1" && ac_cv_prog_$1="$4"
])dnl
fi])dnl
$1="$ac_cv_prog_$1"
if test -n "[$]$1"; then
AC_MSG_RESULT([$]$1)
else
AC_MSG_RESULT(no)
fi
AC_SUBST($1)dnl
])
dnl AC_PATH_PROG(VARIABLE, PROG-TO-CHECK-FOR [, VALUE-IF-NOT-FOUND [, PATH]])
AC_DEFUN(AC_PATH_PROG,
[# Extract the first word of "$2", so it can be a program name with args.
set dummy $2; ac_word=[$]2
AC_MSG_CHECKING([for $ac_word])
AC_CACHE_VAL(ac_cv_path_$1,
[case "[$]$1" in
/*)
ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
;;
?:/*)
ac_cv_path_$1="[$]$1" # Let the user override the test with a dos path.
;;
*)
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
dnl $ac_dummy forces splitting on constant user-supplied paths.
dnl POSIX.2 word splitting is done only on the output of word expansions,
dnl not every word. This closes a longstanding sh security hole.
ac_dummy="ifelse([$4], , $PATH, [$4])"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_path_$1="$ac_dir/$ac_word"
break
fi
done
IFS="$ac_save_ifs"
dnl If no 3rd arg is given, leave the cache variable unset,
dnl so AC_PATH_PROGS will keep looking.
ifelse([$3], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$3"
])dnl
;;
esac])dnl
$1="$ac_cv_path_$1"
if test -n "[$]$1"; then
AC_MSG_RESULT([$]$1)
else
AC_MSG_RESULT(no)
fi
AC_SUBST($1)dnl
])
dnl AC_CHECK_PROGS(VARIABLE, PROGS-TO-CHECK-FOR [, VALUE-IF-NOT-FOUND
dnl [, PATH]])
AC_DEFUN(AC_CHECK_PROGS,
[for ac_prog in $2
do
AC_CHECK_PROG($1, [$]ac_prog, [$]ac_prog, , $4)
test -n "[$]$1" && break
done
ifelse([$3], , , [test -n "[$]$1" || $1="$3"
])])
dnl AC_PATH_PROGS(VARIABLE, PROGS-TO-CHECK-FOR [, VALUE-IF-NOT-FOUND
dnl [, PATH]])
AC_DEFUN(AC_PATH_PROGS,
[for ac_prog in $2
do
AC_PATH_PROG($1, [$]ac_prog, , $4)
test -n "[$]$1" && break
done
ifelse([$3], , , [test -n "[$]$1" || $1="$3"
])])
dnl Internal subroutine.
AC_DEFUN(AC_CHECK_TOOL_PREFIX,
[AC_REQUIRE([AC_CANONICAL_HOST])AC_REQUIRE([AC_CANONICAL_BUILD])dnl
if test $host != $build; then
ac_tool_prefix=${host_alias}-
else
ac_tool_prefix=
fi
])
dnl AC_CHECK_TOOL(VARIABLE, PROG-TO-CHECK-FOR[, VALUE-IF-NOT-FOUND [, PATH]])
AC_DEFUN(AC_CHECK_TOOL,
[AC_REQUIRE([AC_CHECK_TOOL_PREFIX])dnl
AC_CHECK_PROG($1, ${ac_tool_prefix}$2, ${ac_tool_prefix}$2,
ifelse([$3], , [$2], ), $4)
ifelse([$3], , , [
if test -z "$ac_cv_prog_$1"; then
if test -n "$ac_tool_prefix"; then
AC_CHECK_PROG($1, $2, $2, $3)
else
$1="$3"
fi
fi])
])
dnl Guess the value for the `prefix' variable by looking for
dnl the argument program along PATH and taking its parent.
dnl Example: if the argument is `gcc' and we find /usr/local/gnu/bin/gcc,
dnl set `prefix' to /usr/local/gnu.
dnl This comes too late to find a site file based on the prefix,
dnl and it might use a cached value for the path.
dnl No big loss, I think, since most configures don't use this macro anyway.
dnl AC_PREFIX_PROGRAM(PROGRAM)
AC_DEFUN(AC_PREFIX_PROGRAM,
[if test "x$prefix" = xNONE; then
changequote(<<, >>)dnl
define(<<AC_VAR_NAME>>, translit($1, [a-z], [A-Z]))dnl
changequote([, ])dnl
dnl We reimplement AC_MSG_CHECKING (mostly) to avoid the ... in the middle.
echo $ac_n "checking for prefix by $ac_c" 1>&AC_FD_MSG
AC_PATH_PROG(AC_VAR_NAME, $1)
changequote(<<, >>)dnl
if test -n "$ac_cv_path_<<>>AC_VAR_NAME"; then
prefix=`echo $ac_cv_path_<<>>AC_VAR_NAME|sed 's%/[^/][^/]*//*[^/][^/]*$%%'`
changequote([, ])dnl
fi
fi
undefine([AC_VAR_NAME])dnl
])
dnl Try to compile, link and execute TEST-PROGRAM. Set WORKING-VAR to
dnl `yes' if the current compiler works, otherwise set it ti `no'. Set
dnl CROSS-VAR to `yes' if the compiler and linker produce non-native
dnl executables, otherwise set it to `no'. Before calling
dnl `AC_TRY_COMPILER()', call `AC_LANG_*' to set-up for the right
dnl language.
dnl
dnl AC_TRY_COMPILER(TEST-PROGRAM, WORKING-VAR, CROSS-VAR)
AC_DEFUN(AC_TRY_COMPILER,
[cat > conftest.$ac_ext << EOF
ifelse(AC_LANG, [FORTRAN77], ,
[
[#]line __oline__ "configure"
#include "confdefs.h"
])
[$1]
EOF
if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
[$2]=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
[$3]=no
else
[$3]=yes
fi
else
echo "configure: failed program was:" >&AC_FD_CC
cat conftest.$ac_ext >&AC_FD_CC
[$2]=no
fi
rm -fr conftest*])
dnl ### Checking for libraries
dnl AC_TRY_LINK_FUNC(func, action-if-found, action-if-not-found)
dnl Try to link a program that calls FUNC, handling GCC builtins. If
dnl the link succeeds, execute ACTION-IF-FOUND; otherwise, execute
dnl ACTION-IF-NOT-FOUND.
AC_DEFUN(AC_TRY_LINK_FUNC,
AC_TRY_LINK(dnl
ifelse([$1], [main], , dnl Avoid conflicting decl of main.
[/* Override any gcc2 internal prototype to avoid an error. */
]ifelse(AC_LANG, CPLUSPLUS, [#ifdef __cplusplus
extern "C"
#endif
])dnl
[/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $1();
]),
[$1()],
[$2],
[$3]))
dnl AC_SEARCH_LIBS(FUNCTION, SEARCH-LIBS [, ACTION-IF-FOUND
dnl [, ACTION-IF-NOT-FOUND [, OTHER-LIBRARIES]]])
dnl Search for a library defining FUNC, if it's not already available.
AC_DEFUN(AC_SEARCH_LIBS,
[AC_PREREQ([2.13])
AC_CACHE_CHECK([for library containing $1], [ac_cv_search_$1],
[ac_func_search_save_LIBS="$LIBS"
ac_cv_search_$1="no"
AC_TRY_LINK_FUNC([$1], [ac_cv_search_$1="none required"])
test "$ac_cv_search_$1" = "no" && for i in $2; do
LIBS="-l$i $5 $ac_func_search_save_LIBS"
AC_TRY_LINK_FUNC([$1],
[ac_cv_search_$1="-l$i"
break])
done
LIBS="$ac_func_search_save_LIBS"])
if test "$ac_cv_search_$1" != "no"; then
test "$ac_cv_search_$1" = "none required" || LIBS="$ac_cv_search_$1 $LIBS"
$3
else :
$4
fi])
dnl AC_CHECK_LIB(LIBRARY, FUNCTION [, ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND
dnl [, OTHER-LIBRARIES]]])
AC_DEFUN(AC_CHECK_LIB,
[AC_MSG_CHECKING(ifelse([$2], [main], [for -l$1], [for $2 in -l$1]))
dnl Use a cache variable name containing both the library and function name,
dnl because the test really is for library $1 defining function $2, not
dnl just for library $1. Separate tests with the same $1 and different $2s
dnl may have different results.
ac_lib_var=`echo ifelse([$2],main,[$1],[$1[_]$2]) | sed 'y%./+-%__p_%'`
AC_CACHE_VAL(ac_cv_lib_$ac_lib_var,
[ac_save_LIBS="$LIBS"
LIBS="-l$1 $5 $LIBS"
AC_TRY_LINK(ifelse(AC_LANG, [FORTRAN77], ,
ifelse([$2], [main], , dnl Avoid conflicting decl of main.
[/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
#endif
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $2();
])),
[$2()],
eval "ac_cv_lib_$ac_lib_var=yes",
eval "ac_cv_lib_$ac_lib_var=no")
LIBS="$ac_save_LIBS"
])dnl
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
AC_MSG_RESULT(yes)
ifelse([$3], ,
[changequote(, )dnl
ac_tr_lib=HAVE_LIB`echo $1 | sed -e 's/[^a-zA-Z0-9_]/_/g' \
-e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
changequote([, ])dnl
AC_DEFINE_UNQUOTED($ac_tr_lib)
LIBS="-l$1 $LIBS"
], [$3])
else
AC_MSG_RESULT(no)
ifelse([$4], , , [$4
])dnl
fi
])
dnl AC_HAVE_LIBRARY(LIBRARY, [, ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND
dnl [, OTHER-LIBRARIES]]])
AC_DEFUN(AC_HAVE_LIBRARY,
[AC_OBSOLETE([$0], [; instead use AC_CHECK_LIB])dnl
changequote(<<, >>)dnl
define(<<AC_LIB_NAME>>, dnl
patsubst(patsubst($1, <<lib\([^\.]*\)\.a>>, <<\1>>), <<-l>>, <<>>))dnl
define(<<AC_CV_NAME>>, ac_cv_lib_<<>>AC_LIB_NAME)dnl
changequote([, ])dnl
AC_MSG_CHECKING([for -l[]AC_LIB_NAME])
AC_CACHE_VAL(AC_CV_NAME,
[ac_save_LIBS="$LIBS"
LIBS="-l[]AC_LIB_NAME[] $4 $LIBS"
AC_TRY_LINK( , [int main()], AC_CV_NAME=yes, AC_CV_NAME=no)
LIBS="$ac_save_LIBS"
])dnl
AC_MSG_RESULT($AC_CV_NAME)
if test "$AC_CV_NAME" = yes; then
ifelse([$2], ,
[AC_DEFINE([HAVE_LIB]translit(AC_LIB_NAME, [a-z], [A-Z]))
LIBS="-l[]AC_LIB_NAME[] $LIBS"
], [$2])
ifelse([$3], , , [else
$3
])dnl
fi
undefine([AC_LIB_NAME])dnl
undefine([AC_CV_NAME])dnl
])
dnl ### Examining declarations
dnl AC_TRY_CPP(INCLUDES, [ACTION-IF-TRUE [, ACTION-IF-FALSE]])
AC_DEFUN(AC_TRY_CPP,
[AC_REQUIRE_CPP()dnl
cat > conftest.$ac_ext <<EOF
[#]line __oline__ "configure"
#include "confdefs.h"
[$1]
EOF
dnl Capture the stderr of cpp. eval is necessary to expand ac_cpp.
dnl We used to copy stderr to stdout and capture it in a variable, but
dnl that breaks under sh -x, which writes compile commands starting
dnl with ` +' to stderr in eval and subshells.
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
AC_TRY_EVAL(ac_try)
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
ifelse([$2], , :, [rm -rf conftest*
$2])
else
echo "$ac_err" >&AC_FD_CC
echo "configure: failed program was:" >&AC_FD_CC
cat conftest.$ac_ext >&AC_FD_CC
ifelse([$3], , , [ rm -rf conftest*
$3
])dnl
fi
rm -f conftest*])
dnl AC_EGREP_HEADER(PATTERN, HEADER-FILE, ACTION-IF-FOUND [,
dnl ACTION-IF-NOT-FOUND])
AC_DEFUN(AC_EGREP_HEADER,
[AC_EGREP_CPP([$1], [#include <$2>], [$3], [$4])])
dnl Because this macro is used by AC_PROG_GCC_TRADITIONAL, which must
dnl come early, it is not included in AC_BEFORE checks.
dnl AC_EGREP_CPP(PATTERN, PROGRAM, [ACTION-IF-FOUND [,
dnl ACTION-IF-NOT-FOUND]])
AC_DEFUN(AC_EGREP_CPP,
[AC_REQUIRE_CPP()dnl
cat > conftest.$ac_ext <<EOF
[#]line __oline__ "configure"
#include "confdefs.h"
[$2]
EOF
dnl eval is necessary to expand ac_cpp.
dnl Ultrix and Pyramid sh refuse to redirect output of eval, so use subshell.
if (eval "$ac_cpp conftest.$ac_ext") 2>&AC_FD_CC |
dnl Prevent m4 from eating character classes:
changequote(, )dnl
egrep "$1" >/dev/null 2>&1; then
changequote([, ])dnl
ifelse([$3], , :, [rm -rf conftest*
$3])
ifelse([$4], , , [else
rm -rf conftest*
$4
])dnl
fi
rm -f conftest*
])
dnl ### Examining syntax
dnl AC_TRY_COMPILE(INCLUDES, FUNCTION-BODY,
dnl [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]])
AC_DEFUN(AC_TRY_COMPILE,
[cat > conftest.$ac_ext <<EOF
ifelse(AC_LANG, [FORTRAN77],
[ program main
[$2]
end],
[dnl This sometimes fails to find confdefs.h, for some reason.
dnl [#]line __oline__ "[$]0"
[#]line __oline__ "configure"
#include "confdefs.h"
[$1]
int main() {
[$2]
; return 0; }
])EOF
if AC_TRY_EVAL(ac_compile); then
ifelse([$3], , :, [rm -rf conftest*
$3])
else
echo "configure: failed program was:" >&AC_FD_CC
cat conftest.$ac_ext >&AC_FD_CC
ifelse([$4], , , [ rm -rf conftest*
$4
])dnl
fi
rm -f conftest*])
dnl ### Examining libraries
dnl AC_COMPILE_CHECK(ECHO-TEXT, INCLUDES, FUNCTION-BODY,
dnl ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND])
AC_DEFUN(AC_COMPILE_CHECK,
[AC_OBSOLETE([$0], [; instead use AC_TRY_COMPILE or AC_TRY_LINK, and AC_MSG_CHECKING and AC_MSG_RESULT])dnl
ifelse([$1], , , [AC_CHECKING([for $1])
])dnl
AC_TRY_LINK([$2], [$3], [$4], [$5])
])
dnl AC_TRY_LINK(INCLUDES, FUNCTION-BODY,
dnl [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]])
AC_DEFUN(AC_TRY_LINK,
[cat > conftest.$ac_ext <<EOF
ifelse(AC_LANG, [FORTRAN77],
[
program main
call [$2]
end
],
[dnl This sometimes fails to find confdefs.h, for some reason.
dnl [#]line __oline__ "[$]0"
[#]line __oline__ "configure"
#include "confdefs.h"
[$1]
int main() {
[$2]
; return 0; }
])EOF
if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
ifelse([$3], , :, [rm -rf conftest*
$3])
else
echo "configure: failed program was:" >&AC_FD_CC
cat conftest.$ac_ext >&AC_FD_CC
ifelse([$4], , , [ rm -rf conftest*
$4
])dnl
fi
rm -f conftest*])
dnl ### Checking for run-time features
dnl AC_TRY_RUN(PROGRAM, [ACTION-IF-TRUE [, ACTION-IF-FALSE
dnl [, ACTION-IF-CROSS-COMPILING]]])
AC_DEFUN(AC_TRY_RUN,
[if test "$cross_compiling" = yes; then
ifelse([$4], ,
[errprint(__file__:__line__: warning: [AC_TRY_RUN] called without default to allow cross compiling
)dnl
AC_MSG_ERROR(can not run test program while cross compiling)],
[$4])
else
AC_TRY_RUN_NATIVE([$1], [$2], [$3])
fi
])
dnl Like AC_TRY_RUN but assumes a native-environment (non-cross) compiler.
dnl AC_TRY_RUN_NATIVE(PROGRAM, [ACTION-IF-TRUE [, ACTION-IF-FALSE]])
AC_DEFUN(AC_TRY_RUN_NATIVE,
[cat > conftest.$ac_ext <<EOF
[#]line __oline__ "configure"
#include "confdefs.h"
#ifdef __cplusplus
extern "C" void exit(int);
#endif
[$1]
EOF
if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
dnl Don't remove the temporary files here, so they can be examined.
ifelse([$2], , :, [$2])
else
echo "configure: failed program was:" >&AC_FD_CC
cat conftest.$ac_ext >&AC_FD_CC
ifelse([$3], , , [ rm -fr conftest*
$3
])dnl
fi
if test -f core; then
coredir=core`/bin/sh -c 'echo $$'`
mkdir $coredir
cp confdefs.h $coredir/confdefs.h
mv conftest.c $coredir/conftest.c
mv conftest $coredir/conftest
mv core $coredir/core
echo "warning: test program dumped core -- see subdirectory $coredir"
fi
rm -fr conftest*])
dnl ### Checking for header files
dnl AC_CHECK_HEADER(HEADER-FILE, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]])
AC_DEFUN(AC_CHECK_HEADER,
[dnl Do the transliteration at runtime so arg 1 can be a shell variable.
ac_safe=`echo "$1" | sed 'y%./+-%__p_%'`
AC_MSG_CHECKING([for $1])
AC_CACHE_VAL(ac_cv_header_$ac_safe,
[AC_TRY_CPP([#include <$1>], eval "ac_cv_header_$ac_safe=yes",
eval "ac_cv_header_$ac_safe=no")])dnl
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
AC_MSG_RESULT(yes)
ifelse([$2], , :, [$2])
else
AC_MSG_RESULT(no)
ifelse([$3], , , [$3
])dnl
fi
])
dnl AC_CHECK_HEADERS(HEADER-FILE... [, ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]])
AC_DEFUN(AC_CHECK_HEADERS,
[for ac_hdr in $1
do
AC_CHECK_HEADER($ac_hdr,
[changequote(, )dnl
ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
changequote([, ])dnl
AC_DEFINE_UNQUOTED($ac_tr_hdr) $2], $3)dnl
done
])
dnl ### Checking for the existence of files
dnl AC_CHECK_FILE(FILE, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]])
AC_DEFUN(AC_CHECK_FILE,
[AC_REQUIRE([AC_PROG_CC])
dnl Do the transliteration at runtime so arg 1 can be a shell variable.
ac_safe=`echo "$1" | sed 'y%./+-%__p_%'`
AC_MSG_CHECKING([for $1])
AC_CACHE_VAL(ac_cv_file_$ac_safe,
[if test "$cross_compiling" = yes; then
errprint(__file__:__line__: warning: Cannot check for file existence when cross compiling
)dnl
AC_MSG_ERROR(Cannot check for file existence when cross compiling)
else
if test -r $1; then
eval "ac_cv_file_$ac_safe=yes"
else
eval "ac_cv_file_$ac_safe=no"
fi
fi])dnl
if eval "test \"`echo '$ac_cv_file_'$ac_safe`\" = yes"; then
AC_MSG_RESULT(yes)
ifelse([$2], , :, [$2])
else
AC_MSG_RESULT(no)
ifelse([$3], , , [$3])
fi
])
dnl AC_CHECK_FILES(FILE... [, ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]])
AC_DEFUN(AC_CHECK_FILES,
[for ac_file in $1
do
AC_CHECK_FILE($ac_file,
[changequote(, )dnl
ac_tr_file=HAVE_`echo $ac_file | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
changequote([, ])dnl
AC_DEFINE_UNQUOTED($ac_tr_file) $2], $3)dnl
done
])
dnl ### Checking for library functions
dnl AC_CHECK_FUNC(FUNCTION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]])
AC_DEFUN(AC_CHECK_FUNC,
[AC_MSG_CHECKING([for $1])
AC_CACHE_VAL(ac_cv_func_$1,
[AC_TRY_LINK(
dnl Don't include <ctype.h> because on OSF/1 3.0 it includes <sys/types.h>
dnl which includes <sys/select.h> which contains a prototype for
dnl select. Similarly for bzero.
[/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $1(); below. */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
#endif
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $1();
], [
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined (__stub_$1) || defined (__stub___$1)
choke me
#else
$1();
#endif
], eval "ac_cv_func_$1=yes", eval "ac_cv_func_$1=no")])
if eval "test \"`echo '$ac_cv_func_'$1`\" = yes"; then
AC_MSG_RESULT(yes)
ifelse([$2], , :, [$2])
else
AC_MSG_RESULT(no)
ifelse([$3], , , [$3
])dnl
fi
])
dnl AC_CHECK_FUNCS(FUNCTION... [, ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]])
AC_DEFUN(AC_CHECK_FUNCS,
[for ac_func in $1
do
AC_CHECK_FUNC($ac_func,
[changequote(, )dnl
ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
changequote([, ])dnl
AC_DEFINE_UNQUOTED($ac_tr_func) $2], $3)dnl
done
])
dnl AC_REPLACE_FUNCS(FUNCTION...)
AC_DEFUN(AC_REPLACE_FUNCS,
[AC_CHECK_FUNCS([$1], , [LIBOBJS="$LIBOBJS ${ac_func}.${ac_objext}"])
AC_SUBST(LIBOBJS)dnl
])
dnl ### Checking compiler characteristics
dnl AC_CHECK_SIZEOF(TYPE [, CROSS-SIZE])
AC_DEFUN(AC_CHECK_SIZEOF,
[changequote(<<, >>)dnl
dnl The name to #define.
define(<<AC_TYPE_NAME>>, translit(sizeof_$1, [a-z *], [A-Z_P]))dnl
dnl The cache variable name.
define(<<AC_CV_NAME>>, translit(ac_cv_sizeof_$1, [ *], [_p]))dnl
changequote([, ])dnl
AC_MSG_CHECKING(size of $1)
AC_CACHE_VAL(AC_CV_NAME,
[AC_TRY_RUN([#include <stdio.h>
int main()
{
FILE *f=fopen("conftestval", "w");
if (!f) exit(1);
fprintf(f, "%d\n", sizeof($1));
exit(0);
}], AC_CV_NAME=`cat conftestval`, AC_CV_NAME=0, ifelse([$2], , , AC_CV_NAME=$2))])dnl
AC_MSG_RESULT($AC_CV_NAME)
AC_DEFINE_UNQUOTED(AC_TYPE_NAME, $AC_CV_NAME)
undefine([AC_TYPE_NAME])dnl
undefine([AC_CV_NAME])dnl
])
dnl ### Checking for typedefs
dnl AC_CHECK_TYPE(TYPE, DEFAULT)
AC_DEFUN(AC_CHECK_TYPE,
[AC_REQUIRE([AC_HEADER_STDC])dnl
AC_MSG_CHECKING(for $1)
AC_CACHE_VAL(ac_cv_type_$1,
[AC_EGREP_CPP(dnl
changequote(<<,>>)dnl
<<(^|[^a-zA-Z_0-9])$1[^a-zA-Z_0-9]>>dnl
changequote([,]), [#include <sys/types.h>
#if defined(STDC_HEADERS) || defined(HAVE_STDLIB_H)
#include <stdlib.h>
#endif
#if defined(STDC_HEADERS) || defined(HAVE_STDDEF_H)
#include <stddef.h>
#endif], ac_cv_type_$1=yes, ac_cv_type_$1=no)])dnl
AC_MSG_RESULT($ac_cv_type_$1)
if test $ac_cv_type_$1 = no; then
AC_DEFINE($1, $2)
fi
])
dnl ### Creating output files
dnl AC_CONFIG_HEADER(HEADER-TO-CREATE ...)
AC_DEFUN(AC_CONFIG_HEADER,
[define(AC_LIST_HEADER, $1)])
dnl Link each of the existing files SOURCE... to the corresponding
dnl link name in DEST...
dnl AC_LINK_FILES(SOURCE..., DEST...)
AC_DEFUN(AC_LINK_FILES,
[dnl
define([AC_LIST_FILES], ifdef([AC_LIST_FILES], [AC_LIST_FILES ],)[$1])dnl
define([AC_LIST_LINKS], ifdef([AC_LIST_LINKS], [AC_LIST_LINKS ],)[$2])])
dnl Add additional commands for AC_OUTPUT to put into config.status.
dnl Use diversions instead of macros so we can be robust in the
dnl presence of commas in $1 and/or $2.
dnl AC_OUTPUT_COMMANDS(EXTRA-CMDS, INIT-CMDS)
AC_DEFUN(AC_OUTPUT_COMMANDS,
[AC_DIVERT_PUSH(AC_DIVERSION_CMDS)dnl
[$1]
AC_DIVERT_POP()dnl
AC_DIVERT_PUSH(AC_DIVERSION_ICMDS)dnl
[$2]
AC_DIVERT_POP()])
dnl AC_CONFIG_SUBDIRS(DIR ...)
AC_DEFUN(AC_CONFIG_SUBDIRS,
[AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
define([AC_LIST_SUBDIRS], ifdef([AC_LIST_SUBDIRS], [AC_LIST_SUBDIRS ],)[$1])dnl
subdirs="AC_LIST_SUBDIRS"
AC_SUBST(subdirs)dnl
])
dnl The big finish.
dnl Produce config.status, config.h, and links; and configure subdirs.
dnl AC_OUTPUT([FILE...] [, EXTRA-CMDS] [, INIT-CMDS])
define(AC_OUTPUT,
[trap '' 1 2 15
AC_CACHE_SAVE
trap 'rm -fr conftest* confdefs* core $ac_clean_files; exit 1' 1 2 15
test "x$prefix" = xNONE && prefix=$ac_default_prefix
# Let make expand exec_prefix.
test "x$exec_prefix" = xNONE && exec_prefix='$(prefix)'
# Any assignment to VPATH causes Sun make to only execute
# the first set of double-colon rules, so remove it if not needed.
# If there is a colon in the path, we need to keep it.
if test "x$srcdir" = x.; then
changequote(, )dnl
ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d'
changequote([, ])dnl
fi
trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
ifdef([AC_LIST_HEADER], [DEFS=-DHAVE_CONFIG_H], [AC_OUTPUT_MAKE_DEFS()])
# Without the "./", some shells look in PATH for config.status.
: ${CONFIG_STATUS=./config.status}
echo creating $CONFIG_STATUS
rm -f $CONFIG_STATUS
cat > $CONFIG_STATUS <<EOF
#! /bin/sh
# Generated automatically by configure.
# Run this file to recreate the current configuration.
# This directory was configured as follows,
dnl hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
dnl so uname gets run too.
# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
#
[#] [$]0 [$]ac_configure_args
#
# Compiler output produced by configure, useful for debugging
# configure, is in ./config.log if it exists.
changequote(, )dnl
ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
changequote([, ])dnl
for ac_option
do
case "[\$]ac_option" in
-recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
echo "running [\$]{CONFIG_SHELL-/bin/sh} [$]0 [$]ac_configure_args --no-create --no-recursion"
exec [\$]{CONFIG_SHELL-/bin/sh} [$]0 [$]ac_configure_args --no-create --no-recursion ;;
-version | --version | --versio | --versi | --vers | --ver | --ve | --v)
echo "$CONFIG_STATUS generated by autoconf version AC_ACVERSION"
exit 0 ;;
-help | --help | --hel | --he | --h)
echo "[\$]ac_cs_usage"; exit 0 ;;
*) echo "[\$]ac_cs_usage"; exit 1 ;;
esac
done
ac_given_srcdir=$srcdir
ifdef([AC_PROVIDE_AC_PROG_INSTALL], [ac_given_INSTALL="$INSTALL"
])dnl
changequote(<<, >>)dnl
ifdef(<<AC_LIST_HEADER>>,
<<trap 'rm -fr `echo "$1 AC_LIST_HEADER" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15>>,
<<trap 'rm -fr `echo "$1" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15>>)
changequote([, ])dnl
EOF
cat >> $CONFIG_STATUS <<EOF
AC_OUTPUT_FILES($1)
ifdef([AC_LIST_HEADER], [AC_OUTPUT_HEADER(AC_LIST_HEADER)])dnl
ifdef([AC_LIST_LINKS], [AC_OUTPUT_LINKS(AC_LIST_FILES, AC_LIST_LINKS)])dnl
EOF
cat >> $CONFIG_STATUS <<EOF
undivert(AC_DIVERSION_ICMDS)dnl
$3
EOF
cat >> $CONFIG_STATUS <<\EOF
undivert(AC_DIVERSION_CMDS)dnl
$2
exit 0
EOF
chmod +x $CONFIG_STATUS
rm -fr confdefs* $ac_clean_files
test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
dnl config.status should not do recursion.
ifdef([AC_LIST_SUBDIRS], [AC_OUTPUT_SUBDIRS(AC_LIST_SUBDIRS)])dnl
])dnl
dnl Set the DEFS variable to the -D options determined earlier.
dnl This is a subroutine of AC_OUTPUT.
dnl It is called inside configure, outside of config.status.
dnl AC_OUTPUT_MAKE_DEFS()
define(AC_OUTPUT_MAKE_DEFS,
[# Transform confdefs.h into DEFS.
dnl Using a here document instead of a string reduces the quoting nightmare.
# Protect against shell expansion while executing Makefile rules.
# Protect against Makefile macro expansion.
cat > conftest.defs <<\EOF
changequote(<<, >>)dnl
s%<<#define>> \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
s%[ `~<<#>>$^&*(){}\\|;'"<>?]%\\&%g
s%\[%\\&%g
s%\]%\\&%g
s%\$%$$%g
changequote([, ])dnl
EOF
DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
rm -f conftest.defs
])
dnl Do the variable substitutions to create the Makefiles or whatever.
dnl This is a subroutine of AC_OUTPUT. It is called inside an unquoted
dnl here document whose contents are going into config.status, but
dnl upon returning, the here document is being quoted.
dnl AC_OUTPUT_FILES(FILE...)
define(AC_OUTPUT_FILES,
[# Protect against being on the right side of a sed subst in config.status.
changequote(, )dnl
sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
changequote([, ])dnl
dnl These here document variables are unquoted when configure runs
dnl but quoted when config.status runs, so variables are expanded once.
$ac_vpsub
dnl Shell code in configure.in might set extrasub.
$extrasub
dnl Insert the sed substitutions of variables.
undivert(AC_DIVERSION_SED)
CEOF
EOF
cat >> $CONFIG_STATUS <<\EOF
# Split the substitutions into bite-sized pieces for seds with
# small command number limits, like on Digital OSF/1 and HP-UX.
ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
ac_file=1 # Number of current file.
ac_beg=1 # First line for current file.
ac_end=$ac_max_sed_cmds # Line after last line for current file.
ac_more_lines=:
ac_sed_cmds=""
while $ac_more_lines; do
if test $ac_beg -gt 1; then
sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
else
sed "${ac_end}q" conftest.subs > conftest.s$ac_file
fi
if test ! -s conftest.s$ac_file; then
ac_more_lines=false
rm -f conftest.s$ac_file
else
if test -z "$ac_sed_cmds"; then
ac_sed_cmds="sed -f conftest.s$ac_file"
else
ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
fi
ac_file=`expr $ac_file + 1`
ac_beg=$ac_end
ac_end=`expr $ac_end + $ac_max_sed_cmds`
fi
done
if test -z "$ac_sed_cmds"; then
ac_sed_cmds=cat
fi
EOF
cat >> $CONFIG_STATUS <<EOF
CONFIG_FILES=\${CONFIG_FILES-"$1"}
EOF
cat >> $CONFIG_STATUS <<\EOF
for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
changequote(, )dnl
# Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
case "$ac_file" in
*:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
*) ac_file_in="${ac_file}.in" ;;
esac
# Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
# Remove last slash and all that follows it. Not all systems have dirname.
ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
changequote([, ])dnl
if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
# The file is in a subdirectory.
test ! -d "$ac_dir" && mkdir "$ac_dir"
ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
# A "../" for each directory in $ac_dir_suffix.
changequote(, )dnl
ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
changequote([, ])dnl
else
ac_dir_suffix= ac_dots=
fi
case "$ac_given_srcdir" in
.) srcdir=.
if test -z "$ac_dots"; then top_srcdir=.
else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
/*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
*) # Relative path.
srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
top_srcdir="$ac_dots$ac_given_srcdir" ;;
esac
ifdef([AC_PROVIDE_AC_PROG_INSTALL],
[ case "$ac_given_INSTALL" in
changequote(, )dnl
[/$]*) INSTALL="$ac_given_INSTALL" ;;
changequote([, ])dnl
*) INSTALL="$ac_dots$ac_given_INSTALL" ;;
esac
])dnl
echo creating "$ac_file"
rm -f "$ac_file"
configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
case "$ac_file" in
*Makefile*) ac_comsub="1i\\
# $configure_input" ;;
*) ac_comsub= ;;
esac
ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
sed -e "$ac_comsub
s%@configure_input@%$configure_input%g
s%@srcdir@%$srcdir%g
s%@top_srcdir@%$top_srcdir%g
ifdef([AC_PROVIDE_AC_PROG_INSTALL], [s%@INSTALL@%$INSTALL%g
])dnl
dnl The parens around the eval prevent an "illegal io" in Ultrix sh.
" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
dnl This would break Makefile dependencies.
dnl if cmp -s $ac_file conftest.out 2>/dev/null; then
dnl echo "$ac_file is unchanged"
dnl rm -f conftest.out
dnl else
dnl rm -f $ac_file
dnl mv conftest.out $ac_file
dnl fi
fi; done
rm -f conftest.s*
])
dnl Create the config.h files from the config.h.in files.
dnl This is a subroutine of AC_OUTPUT. It is called inside a quoted
dnl here document whose contents are going into config.status.
dnl AC_OUTPUT_HEADER(HEADER-FILE...)
define(AC_OUTPUT_HEADER,
[changequote(<<, >>)dnl
# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
# NAME is the cpp macro being defined and VALUE is the value it is being given.
#
# ac_d sets the value in "#define NAME VALUE" lines.
ac_dA='s%^\([ ]*\)#\([ ]*define[ ][ ]*\)'
ac_dB='\([ ][ ]*\)[^ ]*%\1#\2'
ac_dC='\3'
ac_dD='%g'
# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE".
ac_uA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
ac_uB='\([ ]\)%\1#\2define\3'
ac_uC=' '
ac_uD='\4%g'
# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
ac_eA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
ac_eB='<<$>>%\1#\2define\3'
ac_eC=' '
ac_eD='%g'
# ac_f turns "#define NAME" without trailing blanks into "#define NAME VALUE".
ac_fA='s%^\([ ]*\)#\([ ]*\)define\([ ][ ]*\)'
ac_fB='<<$>>%\1#\2define\3'
ac_fC=' '
ac_fD='%g'
changequote([, ])dnl
if test "${CONFIG_HEADERS+set}" != set; then
EOF
dnl Support passing AC_CONFIG_HEADER a value containing shell variables.
cat >> $CONFIG_STATUS <<EOF
CONFIG_HEADERS="$1"
EOF
cat >> $CONFIG_STATUS <<\EOF
fi
for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
changequote(, )dnl
# Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
case "$ac_file" in
*:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
*) ac_file_in="${ac_file}.in" ;;
esac
changequote([, ])dnl
echo creating $ac_file
rm -f conftest.frag conftest.in conftest.out
ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
cat $ac_file_inputs > conftest.in
EOF
# Transform confdefs.h into a sed script conftest.vals that substitutes
# the proper values into config.h.in to produce config.h. And first:
# Protect against being on the right side of a sed subst in config.status.
# Protect against being in an unquoted here document in config.status.
rm -f conftest.vals
dnl Using a here document instead of a string reduces the quoting nightmare.
dnl Putting comments in sed scripts is not portable.
cat > conftest.hdr <<\EOF
changequote(<<, >>)dnl
s/[\\&%]/\\&/g
s%[\\$`]%\\&%g
s%<<#define>> \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp
s%ac_d%ac_u%gp
s%ac_u%ac_e%gp
s%ac_e%ac_f%gp
changequote([, ])dnl
EOF
sed -n -f conftest.hdr confdefs.h > conftest.vals
rm -f conftest.hdr
dnl This is not necessary at all: Just write
dnl #ifndef _POSIX_SOURCE
dnl #undef _POSIX_SOURCE
dnl #endif
dnl instead of
dnl #undef _POSIX_SOURCE
dnl
dnl # This sed command replaces #undef with comments. This is necessary, for
dnl # example, in the case of _POSIX_SOURCE, which is predefined and required
dnl # on some systems where configure will not decide to define it.
dnl cat >> conftest.vals <<\EOF
dnl changequote(, )dnl
dnl s%^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */%
dnl changequote([, ])dnl
dnl EOF
# Break up conftest.vals because some shells have a limit on
# the size of here documents, and old seds have small limits too.
rm -f conftest.tail
while :
do
ac_lines=`grep -c . conftest.vals`
# grep -c gives empty output for an empty file on some AIX systems.
if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi
# Write a limited-size here document to conftest.frag.
echo ' cat > conftest.frag <<CEOF' >> $CONFIG_STATUS
sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS
echo 'CEOF
sed -f conftest.frag conftest.in > conftest.out
rm -f conftest.in
mv conftest.out conftest.in
' >> $CONFIG_STATUS
sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail
rm -f conftest.vals
mv conftest.tail conftest.vals
done
rm -f conftest.vals
dnl Now back to your regularly scheduled config.status.
cat >> $CONFIG_STATUS <<\EOF
rm -f conftest.frag conftest.h
echo "/* $ac_file. Generated automatically by configure. */" > conftest.h
cat conftest.in >> conftest.h
rm -f conftest.in
if cmp -s $ac_file conftest.h 2>/dev/null; then
echo "$ac_file is unchanged"
rm -f conftest.h
else
# Remove last slash and all that follows it. Not all systems have dirname.
changequote(, )dnl
ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
changequote([, ])dnl
if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
# The file is in a subdirectory.
test ! -d "$ac_dir" && mkdir "$ac_dir"
fi
rm -f $ac_file
mv conftest.h $ac_file
fi
fi; done
])
dnl This is a subroutine of AC_OUTPUT. It is called inside a quoted
dnl here document whose contents are going into config.status.
dnl AC_OUTPUT_LINKS(SOURCE..., DEST...)
define(AC_OUTPUT_LINKS,
[EOF
cat >> $CONFIG_STATUS <<EOF
ac_sources="$1"
ac_dests="$2"
EOF
cat >> $CONFIG_STATUS <<\EOF
srcdir=$ac_given_srcdir
while test -n "$ac_sources"; do
set $ac_dests; ac_dest=[$]1; shift; ac_dests=[$]*
set $ac_sources; ac_source=[$]1; shift; ac_sources=[$]*
echo "linking $srcdir/$ac_source to $ac_dest"
if test ! -r $srcdir/$ac_source; then
AC_MSG_ERROR($srcdir/$ac_source: File not found)
fi
rm -f $ac_dest
# Make relative symlinks.
# Remove last slash and all that follows it. Not all systems have dirname.
changequote(, )dnl
ac_dest_dir=`echo $ac_dest|sed 's%/[^/][^/]*$%%'`
changequote([, ])dnl
if test "$ac_dest_dir" != "$ac_dest" && test "$ac_dest_dir" != .; then
# The dest file is in a subdirectory.
test ! -d "$ac_dest_dir" && mkdir "$ac_dest_dir"
ac_dest_dir_suffix="/`echo $ac_dest_dir|sed 's%^\./%%'`"
# A "../" for each directory in $ac_dest_dir_suffix.
changequote(, )dnl
ac_dots=`echo $ac_dest_dir_suffix|sed 's%/[^/]*%../%g'`
changequote([, ])dnl
else
ac_dest_dir_suffix= ac_dots=
fi
case "$srcdir" in
changequote(, )dnl
[/$]*) ac_rel_source="$srcdir/$ac_source" ;;
changequote([, ])dnl
*) ac_rel_source="$ac_dots$srcdir/$ac_source" ;;
esac
# Make a symlink if possible; otherwise try a hard link. On filesystems
# which support neither symlink nor hard link, use a plain copy.
if ln -s $ac_rel_source $ac_dest 2>/dev/null ||
ln $srcdir/$ac_source $ac_dest 2>/dev/null ||
cp -p $srcdir/$ac_source $ac_dest; then :
else
AC_MSG_ERROR(can not link $ac_dest to $srcdir/$ac_source)
fi
done
])
dnl This is a subroutine of AC_OUTPUT.
dnl It is called after running config.status.
dnl AC_OUTPUT_SUBDIRS(DIRECTORY...)
define(AC_OUTPUT_SUBDIRS,
[
if test "$no_recursion" != yes; then
# Remove --cache-file and --srcdir arguments so they do not pile up.
ac_sub_configure_args=
ac_prev=
for ac_arg in $ac_configure_args; do
if test -n "$ac_prev"; then
ac_prev=
continue
fi
case "$ac_arg" in
-cache-file | --cache-file | --cache-fil | --cache-fi \
| --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
ac_prev=cache_file ;;
-cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
| --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
;;
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
ac_prev=srcdir ;;
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
;;
*) ac_sub_configure_args="$ac_sub_configure_args $ac_arg" ;;
esac
done
for ac_config_dir in $1; do
# Do not complain, so a configure script can configure whichever
# parts of a large source tree are present.
if test ! -d $srcdir/$ac_config_dir; then
continue
fi
echo configuring in $ac_config_dir
case "$srcdir" in
.) ;;
*)
if test -d ./$ac_config_dir || mkdir ./$ac_config_dir; then :;
else
AC_MSG_ERROR(can not create `pwd`/$ac_config_dir)
fi
;;
esac
ac_popdir=`pwd`
cd $ac_config_dir
changequote(, )dnl
# A "../" for each directory in /$ac_config_dir.
ac_dots=`echo $ac_config_dir|sed -e 's%^\./%%' -e 's%[^/]$%&/%' -e 's%[^/]*/%../%g'`
changequote([, ])dnl
case "$srcdir" in
.) # No --srcdir option. We are building in place.
ac_sub_srcdir=$srcdir ;;
/*) # Absolute path.
ac_sub_srcdir=$srcdir/$ac_config_dir ;;
*) # Relative path.
ac_sub_srcdir=$ac_dots$srcdir/$ac_config_dir ;;
esac
# Check for guested configure; otherwise get Cygnus style configure.
if test -f $ac_sub_srcdir/configure; then
ac_sub_configure=$ac_sub_srcdir/configure
elif test -f $ac_sub_srcdir/configure.in; then
ac_sub_configure=$ac_configure
else
AC_MSG_WARN(no configuration information is in $ac_config_dir)
ac_sub_configure=
fi
# The recursion is here.
if test -n "$ac_sub_configure"; then
# Make the cache file name correct relative to the subdirectory.
case "$cache_file" in
/*) ac_sub_cache_file=$cache_file ;;
*) # Relative path.
if test -n "$ac_dots"; then
ac_sub_cache_file="$ac_dots"`echo "$cache_file" | sed 's,^\./,,'`
else
ac_sub_cache_file="$cache_file"
fi
;;
esac
ifdef([AC_PROVIDE_AC_PROG_INSTALL],
[ case "$ac_given_INSTALL" in
changequote(, )dnl
[/$]*) INSTALL="$ac_given_INSTALL" ;;
changequote([, ])dnl
*) INSTALL="$ac_dots$ac_given_INSTALL" ;;
esac
])dnl
echo "[running ${CONFIG_SHELL-/bin/sh} $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file] --srcdir=$ac_sub_srcdir"
# The eval makes quoting arguments work.
if eval ${CONFIG_SHELL-/bin/sh} $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_sub_srcdir
then :
else
AC_MSG_ERROR($ac_sub_configure failed for $ac_config_dir)
fi
fi
cd $ac_popdir
done
fi
])