| # Makefile for libiconv/src |
| |
| #### Start of system configuration section. #### |
| |
| # Directories used by "make": |
| srcdir = @srcdir@ |
| top_srcdir = @top_srcdir@ |
| |
| # Directories used by "make install": |
| prefix = @prefix@ |
| local_prefix = /usr/local |
| exec_prefix = @exec_prefix@ |
| bindir = @bindir@ |
| libdir = @libdir@ |
| datarootdir = @datarootdir@ |
| datadir = @datadir@ |
| localedir = @localedir@ |
| |
| # Programs used by "make": |
| CC = @CC@ |
| CFLAGS = @CFLAGS@ |
| CPPFLAGS = @CPPFLAGS@ |
| LDFLAGS = @LDFLAGS@ |
| INCLUDES = -I. -I$(srcdir) -I.. -I../include -I$(srcdir)/../include -I../srclib -I$(srcdir)/../srclib |
| LIBTOOL = @LIBTOOL@ |
| LIBTOOL_COMPILE = $(LIBTOOL) --mode=compile |
| LIBTOOL_LINK = $(LIBTOOL) --mode=link |
| LIBTOOL_INSTALL = $(LIBTOOL) --mode=install |
| LIBTOOL_UNINSTALL = $(LIBTOOL) --mode=uninstall |
| WINDRES = @WINDRES@ |
| RM = rm -f |
| @SET_MAKE@ |
| |
| # Programs used by "make install": |
| INSTALL = @INSTALL@ |
| INSTALL_PROGRAM = @INSTALL_PROGRAM@ |
| INSTALL_DATA = @INSTALL_DATA@ |
| mkinstalldirs = $(SHELL) @top_srcdir@/build-aux/mkinstalldirs |
| |
| # Programs used by "make install-strip": |
| STRIP = @STRIP@ |
| INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ |
| install_sh = @install_sh@ |
| |
| #### End of system configuration section. #### |
| |
| SHELL = @SHELL@ |
| |
| PACKAGE_VERSION = @VERSION@ |
| |
| # Needed by $(LIBTOOL). |
| top_builddir = .. |
| |
| # Needed by SET_RELOCATABLE. |
| EXEEXT = @EXEEXT@ |
| |
| # Needed by RELOCATABLE_LDFLAGS. |
| host = @host@ |
| |
| OBJECTS_RES_yes = iconv.res |
| OBJECTS_RES_no = |
| |
| # We cannot link with libintl until libiconv is installed. (When we call |
| # libtool with arguments "../lib/libiconv.la -lintl", libtool will call ld |
| # with "../lib/.libs/libiconv.so $libdir/libintl.so $libdir/libiconv.so", |
| # (remember that $libdir/libintl.la lists $libdir/libiconv.so as a dependency), |
| # and this gives a fatal linker error on Solaris because the two libiconv.so |
| # files are different but have the same soname. |
| # So we can link the iconv executable only after we have installed libiconv, |
| # i.e. during "make install". The intermediate 'iconv' executable is built |
| # without internationalization and not linked with libintl. |
| |
| all : iconv_no_i18n$(EXEEXT) iconv.@OBJEXT@ $(OBJECTS_RES_@WOE32@) |
| test `ls -ld . | sed -e 's/^d\(.........\).*/\1/'` = rwxrwxrwx || chmod 777 . |
| |
| # This is the temporary iconv executable, without internationalization. |
| iconv_no_i18n$(EXEEXT) : iconv_no_i18n.@OBJEXT@ ../lib/libiconv.la $(OBJECTS_RES_@WOE32@) |
| $(LIBTOOL_LINK) $(CC) $(LDFLAGS) $(CFLAGS) iconv_no_i18n.@OBJEXT@ ../srclib/libicrt.a ../lib/libiconv.la $(OBJECTS_RES_@WOE32@) -o $@ |
| |
| iconv_no_i18n.@OBJEXT@ : $(srcdir)/iconv_no_i18n.c $(srcdir)/iconv.c |
| $(CC) -c $(INCLUDES) -I../lib $(CFLAGS) $(CPPFLAGS) -DINSTALLDIR=\"$(bindir)\" -DLOCALEDIR=\"$(localedir)\" $(srcdir)/iconv_no_i18n.c |
| |
| iconv.@OBJEXT@ : $(srcdir)/iconv.c |
| $(CC) -c $(INCLUDES) -I../lib $(CFLAGS) $(CPPFLAGS) -DINSTALLDIR=\"$(bindir)\" -DLOCALEDIR=\"$(localedir)\" $(srcdir)/iconv.c |
| |
| iconv.res : $(srcdir)/../windows/iconv.rc |
| $(WINDRES) `$(SHELL) $(srcdir)/../windows/windres-options --escape $(PACKAGE_VERSION)` -i $(srcdir)/../windows/iconv.rc -o iconv.res --output-format=coff |
| |
| # The following rule is necessary to avoid a toplevel "make -n check" failure. |
| ../lib/libiconv.la : |
| cd ../lib && $(MAKE) libiconv.la |
| |
| # Support for relocatability. |
| RELOCATABLE_LIBRARY_PATH = $(libdir) |
| RELOCATABLE_SRC_DIR = $(top_srcdir)/srclib |
| RELOCATABLE_BUILD_DIR = ../srclib |
| RELOCATABLE_CONFIG_H_DIR = .. |
| RELOCATABLE_LDFLAGS = @RELOCATABLE_LDFLAGS@ |
| RELOCATABLE_STRIP = : |
| INSTALL_PROGRAM_ENV = @INSTALL_PROGRAM_ENV@ |
| iconv_LDFLAGS = `if test -n '$(RELOCATABLE_LDFLAGS)'; then $(RELOCATABLE_LDFLAGS) $(bindir); fi` |
| |
| # During "make install", we can build the final iconv executable. |
| # On HP-UX, in order to ensure that the new libiconv.sl will override the old |
| # one that is hardcoded in libintl.sl, we need to mention libiconv.sl before |
| # libintl.sl on the link command line. We have to bypass libtool in order to |
| # achieve this. |
| # On Solaris, the linker gives an error if we are using libintl.so and it |
| # refers to a libiconv.so in $prefix/lib since then it sees two libiconv.so's, |
| # one in $prefix/lib and one in ../lib/.libs. So we have to avoid using |
| # ../lib/libiconv.la entirely. |
| install : all force |
| if [ ! -d $(DESTDIR)$(bindir) ] ; then $(mkinstalldirs) $(DESTDIR)$(bindir) ; fi |
| case "@host_os@" in \ |
| hpux*) $(CC) $(LDFLAGS) $(CFLAGS) $(iconv_LDFLAGS) iconv.@OBJEXT@ ../srclib/libicrt.a -L$(DESTDIR)$(libdir) -liconv @LIBINTL@ $(OBJECTS_RES_@WOE32@) `if test -n '$(DESTDIR)'; then echo " -Wl,+b -Wl,$(libdir)"; fi` -o iconv$(EXEEXT);; \ |
| *) $(LIBTOOL_LINK) $(CC) $(LDFLAGS) $(CFLAGS) $(iconv_LDFLAGS) iconv.@OBJEXT@ ../srclib/libicrt.a @LTLIBINTL@ $(DESTDIR)$(libdir)/libiconv.la $(OBJECTS_RES_@WOE32@) -o iconv$(EXEEXT);; \ |
| esac |
| $(INSTALL_PROGRAM_ENV) $(LIBTOOL_INSTALL) $(INSTALL_PROGRAM) iconv$(EXEEXT) $(DESTDIR)$(bindir)/iconv$(EXEEXT) |
| |
| install-strip : force |
| case '$(INSTALL_PROGRAM)' in \ |
| */install-reloc) \ |
| $(MAKE) install prefix='$(prefix)' exec_prefix='$(exec_prefix)' libdir='$(libdir)' RELOCATABLE_STRIP='$(STRIP)' ;; \ |
| *) \ |
| $(MAKE) install prefix='$(prefix)' exec_prefix='$(exec_prefix)' libdir='$(libdir)' INSTALL_PROGRAM='$(INSTALL_STRIP_PROGRAM)' ;; \ |
| esac |
| |
| installdirs : force |
| if [ ! -d $(DESTDIR)$(bindir) ] ; then $(mkinstalldirs) $(DESTDIR)$(bindir) ; fi |
| |
| uninstall : force |
| $(LIBTOOL_UNINSTALL) $(RM) $(DESTDIR)$(bindir)/iconv$(EXEEXT) |
| |
| check : all |
| |
| mostlyclean : clean |
| |
| clean : force |
| $(RM) *.@OBJEXT@ *.lo iconv.res iconv_no_i18n iconv_no_i18n$(EXEEXT) iconv$(EXEEXT) core *.stackdump |
| $(RM) -r .libs _libs |
| |
| distclean : clean |
| $(RM) Makefile |
| |
| maintainer-clean : distclean |
| |
| # List of source files. |
| SOURCE_FILES = \ |
| Makefile.in \ |
| iconv.c iconv_no_i18n.c \ |
| zos-tag.h |
| # List of distributed files imported from other packages. |
| IMPORTED_FILES = |
| # List of distributed files generated by autotools or Makefile.devel. |
| GENERATED_FILES = |
| # List of distributed files generated by "make". |
| DISTRIBUTED_BUILT_FILES = |
| # List of distributed files. |
| DISTFILES = $(SOURCE_FILES) $(IMPORTED_FILES) $(GENERATED_FILES) $(DISTRIBUTED_BUILT_FILES) |
| |
| distdir : $(DISTFILES) |
| for file in $(DISTFILES); do \ |
| if test -f $$file; then dir='.'; else dir='$(srcdir)'; fi; \ |
| cp -p "$$dir/$$file" '$(distdir)'/$$file || exit 1; \ |
| done |
| |
| force : |
| |