| /**************************************************************************** |
| * |
| * fterrdef.h |
| * |
| * FreeType error codes (specification). |
| * |
| * Copyright (C) 2002-2020 by |
| * David Turner, Robert Wilhelm, and Werner Lemberg. |
| * |
| * This file is part of the FreeType project, and may only be used, |
| * modified, and distributed under the terms of the FreeType project |
| * license, LICENSE.TXT. By continuing to use, modify, or distribute |
| * this file you indicate that you have read the license and |
| * understand and accept it fully. |
| * |
| */ |
| |
| |
| /************************************************************************** |
| * |
| * @section: |
| * error_code_values |
| * |
| * @title: |
| * Error Code Values |
| * |
| * @abstract: |
| * All possible error codes returned by FreeType functions. |
| * |
| * @description: |
| * The list below is taken verbatim from the file `fterrdef.h` (loaded |
| * automatically by including `FT_FREETYPE_H`). The first argument of the |
| * `FT_ERROR_DEF_` macro is the error label; by default, the prefix |
| * `FT_Err_` gets added so that you get error names like |
| * `FT_Err_Cannot_Open_Resource`. The second argument is the error code, |
| * and the last argument an error string, which is not used by FreeType. |
| * |
| * Within your application you should **only** use error names and |
| * **never** its numeric values! The latter might (and actually do) |
| * change in forthcoming FreeType versions. |
| * |
| * Macro `FT_NOERRORDEF_` defines `FT_Err_Ok`, which is always zero. See |
| * the 'Error Enumerations' subsection how to automatically generate a |
| * list of error strings. |
| * |
| */ |
| |
| |
| /************************************************************************** |
| * |
| * @enum: |
| * FT_Err_XXX |
| * |
| */ |
| |
| /* generic errors */ |
| |
| FT_NOERRORDEF_( Ok, 0x00, |
| "no error" ) |
| |
| FT_ERRORDEF_( Cannot_Open_Resource, 0x01, |
| "cannot open resource" ) |
| FT_ERRORDEF_( Unknown_File_Format, 0x02, |
| "unknown file format" ) |
| FT_ERRORDEF_( Invalid_File_Format, 0x03, |
| "broken file" ) |
| FT_ERRORDEF_( Invalid_Version, 0x04, |
| "invalid FreeType version" ) |
| FT_ERRORDEF_( Lower_Module_Version, 0x05, |
| "module version is too low" ) |
| FT_ERRORDEF_( Invalid_Argument, 0x06, |
| "invalid argument" ) |
| FT_ERRORDEF_( Unimplemented_Feature, 0x07, |
| "unimplemented feature" ) |
| FT_ERRORDEF_( Invalid_Table, 0x08, |
| "broken table" ) |
| FT_ERRORDEF_( Invalid_Offset, 0x09, |
| "broken offset within table" ) |
| FT_ERRORDEF_( Array_Too_Large, 0x0A, |
| "array allocation size too large" ) |
| FT_ERRORDEF_( Missing_Module, 0x0B, |
| "missing module" ) |
| FT_ERRORDEF_( Missing_Property, 0x0C, |
| "missing property" ) |
| |
| /* glyph/character errors */ |
| |
| FT_ERRORDEF_( Invalid_Glyph_Index, 0x10, |
| "invalid glyph index" ) |
| FT_ERRORDEF_( Invalid_Character_Code, 0x11, |
| "invalid character code" ) |
| FT_ERRORDEF_( Invalid_Glyph_Format, 0x12, |
| "unsupported glyph image format" ) |
| FT_ERRORDEF_( Cannot_Render_Glyph, 0x13, |
| "cannot render this glyph format" ) |
| FT_ERRORDEF_( Invalid_Outline, 0x14, |
| "invalid outline" ) |
| FT_ERRORDEF_( Invalid_Composite, 0x15, |
| "invalid composite glyph" ) |
| FT_ERRORDEF_( Too_Many_Hints, 0x16, |
| "too many hints" ) |
| FT_ERRORDEF_( Invalid_Pixel_Size, 0x17, |
| "invalid pixel size" ) |
| |
| /* handle errors */ |
| |
| FT_ERRORDEF_( Invalid_Handle, 0x20, |
| "invalid object handle" ) |
| FT_ERRORDEF_( Invalid_Library_Handle, 0x21, |
| "invalid library handle" ) |
| FT_ERRORDEF_( Invalid_Driver_Handle, 0x22, |
| "invalid module handle" ) |
| FT_ERRORDEF_( Invalid_Face_Handle, 0x23, |
| "invalid face handle" ) |
| FT_ERRORDEF_( Invalid_Size_Handle, 0x24, |
| "invalid size handle" ) |
| FT_ERRORDEF_( Invalid_Slot_Handle, 0x25, |
| "invalid glyph slot handle" ) |
| FT_ERRORDEF_( Invalid_CharMap_Handle, 0x26, |
| "invalid charmap handle" ) |
| FT_ERRORDEF_( Invalid_Cache_Handle, 0x27, |
| "invalid cache manager handle" ) |
| FT_ERRORDEF_( Invalid_Stream_Handle, 0x28, |
| "invalid stream handle" ) |
| |
| /* driver errors */ |
| |
| FT_ERRORDEF_( Too_Many_Drivers, 0x30, |
| "too many modules" ) |
| FT_ERRORDEF_( Too_Many_Extensions, 0x31, |
| "too many extensions" ) |
| |
| /* memory errors */ |
| |
| FT_ERRORDEF_( Out_Of_Memory, 0x40, |
| "out of memory" ) |
| FT_ERRORDEF_( Unlisted_Object, 0x41, |
| "unlisted object" ) |
| |
| /* stream errors */ |
| |
| FT_ERRORDEF_( Cannot_Open_Stream, 0x51, |
| "cannot open stream" ) |
| FT_ERRORDEF_( Invalid_Stream_Seek, 0x52, |
| "invalid stream seek" ) |
| FT_ERRORDEF_( Invalid_Stream_Skip, 0x53, |
| "invalid stream skip" ) |
| FT_ERRORDEF_( Invalid_Stream_Read, 0x54, |
| "invalid stream read" ) |
| FT_ERRORDEF_( Invalid_Stream_Operation, 0x55, |
| "invalid stream operation" ) |
| FT_ERRORDEF_( Invalid_Frame_Operation, 0x56, |
| "invalid frame operation" ) |
| FT_ERRORDEF_( Nested_Frame_Access, 0x57, |
| "nested frame access" ) |
| FT_ERRORDEF_( Invalid_Frame_Read, 0x58, |
| "invalid frame read" ) |
| |
| /* raster errors */ |
| |
| FT_ERRORDEF_( Raster_Uninitialized, 0x60, |
| "raster uninitialized" ) |
| FT_ERRORDEF_( Raster_Corrupted, 0x61, |
| "raster corrupted" ) |
| FT_ERRORDEF_( Raster_Overflow, 0x62, |
| "raster overflow" ) |
| FT_ERRORDEF_( Raster_Negative_Height, 0x63, |
| "negative height while rastering" ) |
| |
| /* cache errors */ |
| |
| FT_ERRORDEF_( Too_Many_Caches, 0x70, |
| "too many registered caches" ) |
| |
| /* TrueType and SFNT errors */ |
| |
| FT_ERRORDEF_( Invalid_Opcode, 0x80, |
| "invalid opcode" ) |
| FT_ERRORDEF_( Too_Few_Arguments, 0x81, |
| "too few arguments" ) |
| FT_ERRORDEF_( Stack_Overflow, 0x82, |
| "stack overflow" ) |
| FT_ERRORDEF_( Code_Overflow, 0x83, |
| "code overflow" ) |
| FT_ERRORDEF_( Bad_Argument, 0x84, |
| "bad argument" ) |
| FT_ERRORDEF_( Divide_By_Zero, 0x85, |
| "division by zero" ) |
| FT_ERRORDEF_( Invalid_Reference, 0x86, |
| "invalid reference" ) |
| FT_ERRORDEF_( Debug_OpCode, 0x87, |
| "found debug opcode" ) |
| FT_ERRORDEF_( ENDF_In_Exec_Stream, 0x88, |
| "found ENDF opcode in execution stream" ) |
| FT_ERRORDEF_( Nested_DEFS, 0x89, |
| "nested DEFS" ) |
| FT_ERRORDEF_( Invalid_CodeRange, 0x8A, |
| "invalid code range" ) |
| FT_ERRORDEF_( Execution_Too_Long, 0x8B, |
| "execution context too long" ) |
| FT_ERRORDEF_( Too_Many_Function_Defs, 0x8C, |
| "too many function definitions" ) |
| FT_ERRORDEF_( Too_Many_Instruction_Defs, 0x8D, |
| "too many instruction definitions" ) |
| FT_ERRORDEF_( Table_Missing, 0x8E, |
| "SFNT font table missing" ) |
| FT_ERRORDEF_( Horiz_Header_Missing, 0x8F, |
| "horizontal header (hhea) table missing" ) |
| FT_ERRORDEF_( Locations_Missing, 0x90, |
| "locations (loca) table missing" ) |
| FT_ERRORDEF_( Name_Table_Missing, 0x91, |
| "name table missing" ) |
| FT_ERRORDEF_( CMap_Table_Missing, 0x92, |
| "character map (cmap) table missing" ) |
| FT_ERRORDEF_( Hmtx_Table_Missing, 0x93, |
| "horizontal metrics (hmtx) table missing" ) |
| FT_ERRORDEF_( Post_Table_Missing, 0x94, |
| "PostScript (post) table missing" ) |
| FT_ERRORDEF_( Invalid_Horiz_Metrics, 0x95, |
| "invalid horizontal metrics" ) |
| FT_ERRORDEF_( Invalid_CharMap_Format, 0x96, |
| "invalid character map (cmap) format" ) |
| FT_ERRORDEF_( Invalid_PPem, 0x97, |
| "invalid ppem value" ) |
| FT_ERRORDEF_( Invalid_Vert_Metrics, 0x98, |
| "invalid vertical metrics" ) |
| FT_ERRORDEF_( Could_Not_Find_Context, 0x99, |
| "could not find context" ) |
| FT_ERRORDEF_( Invalid_Post_Table_Format, 0x9A, |
| "invalid PostScript (post) table format" ) |
| FT_ERRORDEF_( Invalid_Post_Table, 0x9B, |
| "invalid PostScript (post) table" ) |
| FT_ERRORDEF_( DEF_In_Glyf_Bytecode, 0x9C, |
| "found FDEF or IDEF opcode in glyf bytecode" ) |
| FT_ERRORDEF_( Missing_Bitmap, 0x9D, |
| "missing bitmap in strike" ) |
| |
| /* CFF, CID, and Type 1 errors */ |
| |
| FT_ERRORDEF_( Syntax_Error, 0xA0, |
| "opcode syntax error" ) |
| FT_ERRORDEF_( Stack_Underflow, 0xA1, |
| "argument stack underflow" ) |
| FT_ERRORDEF_( Ignore, 0xA2, |
| "ignore" ) |
| FT_ERRORDEF_( No_Unicode_Glyph_Name, 0xA3, |
| "no Unicode glyph name found" ) |
| FT_ERRORDEF_( Glyph_Too_Big, 0xA4, |
| "glyph too big for hinting" ) |
| |
| /* BDF errors */ |
| |
| FT_ERRORDEF_( Missing_Startfont_Field, 0xB0, |
| "`STARTFONT' field missing" ) |
| FT_ERRORDEF_( Missing_Font_Field, 0xB1, |
| "`FONT' field missing" ) |
| FT_ERRORDEF_( Missing_Size_Field, 0xB2, |
| "`SIZE' field missing" ) |
| FT_ERRORDEF_( Missing_Fontboundingbox_Field, 0xB3, |
| "`FONTBOUNDINGBOX' field missing" ) |
| FT_ERRORDEF_( Missing_Chars_Field, 0xB4, |
| "`CHARS' field missing" ) |
| FT_ERRORDEF_( Missing_Startchar_Field, 0xB5, |
| "`STARTCHAR' field missing" ) |
| FT_ERRORDEF_( Missing_Encoding_Field, 0xB6, |
| "`ENCODING' field missing" ) |
| FT_ERRORDEF_( Missing_Bbx_Field, 0xB7, |
| "`BBX' field missing" ) |
| FT_ERRORDEF_( Bbx_Too_Big, 0xB8, |
| "`BBX' too big" ) |
| FT_ERRORDEF_( Corrupted_Font_Header, 0xB9, |
| "Font header corrupted or missing fields" ) |
| FT_ERRORDEF_( Corrupted_Font_Glyphs, 0xBA, |
| "Font glyphs corrupted or missing fields" ) |
| |
| /* */ |
| |
| |
| /* END */ |
