doc/fcconfig.fncs - third_party/fontconfig - Git at Google

 /*
  * fontconfig/doc/fcconfig.fncs
  *
  * Copyright © 2003 Keith Packard
  *
  * Permission to use, copy, modify, distribute, and sell this software and its
  * documentation for any purpose is hereby granted without fee, provided that
  * the above copyright notice appear in all copies and that both that
  * copyright notice and this permission notice appear in supporting
  * documentation, and that the name of the author(s) not be used in
  * advertising or publicity pertaining to distribution of the software without
  * specific, written prior permission.  The authors make no
  * representations about the suitability of this software for any purpose.  It
  * is provided "as is" without express or implied warranty.
  *
  * THE AUTHOR(S) DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
  * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
  * EVENT SHALL THE AUTHOR(S) BE LIABLE FOR ANY SPECIAL, INDIRECT OR
  * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
  * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
  * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
  * PERFORMANCE OF THIS SOFTWARE.
  */
 @RET@           FcConfig *
 @FUNC@          FcConfigCreate
 @TYPE1@		void
 @PURPOSE@	Create a configuration
 @DESC@
 Creates an empty configuration.
 @@

 @RET@           FcConfig *
 @FUNC@          FcConfigReference
 @TYPE1@         FcConfig *                      @ARG1@          config
 @PURPOSE@	Increment config reference count
 @DESC@
 Add another reference to <parameter>config</parameter>. Configs are freed only
 when the reference count reaches zero.
 If <parameter>config</parameter> is NULL, the current configuration is used.
 In that case this function will be similar to FcConfigGetCurrent() except that
 it increments the reference count before returning and the user is responsible
 for destroying the configuration when not needed anymore.
 @@

 @RET@           void
 @FUNC@          FcConfigDestroy
 @TYPE1@         FcConfig *                      @ARG1@          config
 @PURPOSE@	Destroy a configuration
 @DESC@
 Decrements the config reference count. If all references are gone, destroys
 the configuration and any data associated with it.
 Note that calling this function with the return from FcConfigGetCurrent will
 cause a new configuration to be created for use as current configuration.
 @@

 @RET@           FcBool
 @FUNC@          FcConfigSetCurrent
 @TYPE1@         FcConfig *                      @ARG1@          config
 @PURPOSE@	Set configuration as default
 @DESC@
 Sets the current default configuration to <parameter>config</parameter>.  Implicitly calls
 FcConfigBuildFonts if necessary, and FcConfigReference() to inrease the reference count
 in <parameter>config</parameter> since 2.12.0, returning FcFalse if that call fails.
 @@

 @RET@           FcConfig *
 @FUNC@          FcConfigGetCurrent
 @TYPE1@		void
 @PURPOSE@	Return current configuration
 @DESC@
 Returns the current default configuration.
 @@

 @RET@           FcBool
 @FUNC@          FcConfigUptoDate
 @TYPE1@         FcConfig *                      @ARG1@          config
 @PURPOSE@	Check timestamps on config files
 @DESC@
 Checks all of the files related to <parameter>config</parameter> and returns
 whether any of them has been modified since the configuration was created.
 If <parameter>config</parameter> is NULL, the current configuration is used.
 @@

 @RET@		FcChar8 *
 @FUNC@		FcConfigHome
 @TYPE1@		void
 @PURPOSE@	return the current home directory.
 @DESC@
 Return the current user's home directory, if it is available, and if using it
 is enabled, and NULL otherwise.
 See also <function>FcConfigEnableHome</function>).
 @@

 @RET@		FcBool
 @FUNC@		FcConfigEnableHome
 @TYPE1@		FcBool%				@ARG1@		enable
 @PURPOSE@	controls use of the home directory.
 @DESC@
 If <parameter>enable</parameter> is FcTrue, then Fontconfig will use various
 files which are specified relative to the user's home directory (using the ~
 notation in the configuration). When <parameter>enable</parameter> is
 FcFalse, then all use of the home directory in these contexts will be
 disabled. The previous setting of the value is returned.
 @@

 @RET@           FcBool
 @FUNC@          FcConfigBuildFonts
 @TYPE1@         FcConfig *                      @ARG1@          config
 @PURPOSE@	Build font database
 @DESC@
 Builds the set of available fonts for the given configuration.  Note that
 any changes to the configuration after this call have indeterminate effects.
 Returns FcFalse if this operation runs out of memory.
 If <parameter>config</parameter> is NULL, the current configuration is used.
 @@

 @RET@           FcStrList *
 @FUNC@          FcConfigGetConfigDirs
 @TYPE1@         FcConfig *                      @ARG1@          config
 @PURPOSE@	Get config directories
 @DESC@
 Returns the list of font directories specified in the configuration files
 for <parameter>config</parameter>.  Does not include any subdirectories.
 If <parameter>config</parameter> is NULL, the current configuration is used.
 @@

 @RET@           FcStrList *
 @FUNC@          FcConfigGetFontDirs
 @TYPE1@         FcConfig *                      @ARG1@          config
 @PURPOSE@	Get font directories
 @DESC@
 Returns the list of font directories in <parameter>config</parameter>. This includes the
 configured font directories along with any directories below those in the
 filesystem.
 If <parameter>config</parameter> is NULL, the current configuration is used.
 @@

 @RET@           FcStrList *
 @FUNC@          FcConfigGetConfigFiles
 @TYPE1@         FcConfig *                      @ARG1@          config
 @PURPOSE@	Get config files
 @DESC@
 Returns the list of known configuration files used to generate <parameter>config</parameter>.
 If <parameter>config</parameter> is NULL, the current configuration is used.
 @@

 @RET@           FcChar8 *
 @FUNC@          FcConfigGetCache
 @TYPE1@         FcConfig *                      @ARG1@          config
 @PURPOSE@	DEPRECATED used to return per-user cache filename
 @DESC@
 With fontconfig no longer using per-user cache files, this function now
 simply returns NULL to indicate that no per-user file exists.
 @@

 @RET@		FcStrList *
 @FUNC@		FcConfigGetCacheDirs
 @TYPE1@		const FcConfig *		@ARG1@		config
 @PURPOSE@	return the list of directories searched for cache files
 @DESC@
 <function>FcConfigGetCacheDirs</function> returns a string list containing
 all of the directories that fontconfig will search when attempting to load a
 cache file for a font directory.
 If <parameter>config</parameter> is NULL, the current configuration is used.
 @@

 @RET@           FcFontSet *
 @FUNC@          FcConfigGetFonts
 @TYPE1@         FcConfig *			@ARG1@		config
 @TYPE2@		FcSetName%                      @ARG2@          set
 @PURPOSE@	Get config font set
 @DESC@
 Returns one of the two sets of fonts from the configuration as specified
 by <parameter>set</parameter>. This font set is owned by the library and must
 not be modified or freed.
 If <parameter>config</parameter> is NULL, the current configuration is used.
     </para><para>
 This function isn't MT-safe. <function>FcConfigReference</function> must be called
 before using this and then <function>FcConfigDestroy</function> when
 the return value is no longer referenced.
 @@

 @RET@           FcBlanks *
 @FUNC@          FcConfigGetBlanks
 @TYPE1@         FcConfig *                      @ARG1@          config
 @PURPOSE@	Get config blanks
 @DESC@
 FcBlanks is deprecated.
 This function always returns NULL.
 @@

 @RET@           int
 @FUNC@          FcConfigGetRescanInterval
 @TYPE1@         FcConfig *                      @ARG1@          config
 @PURPOSE@	Get config rescan interval
 @DESC@
 Returns the interval between automatic checks of the configuration (in
 seconds) specified in <parameter>config</parameter>.  The configuration is checked during
 a call to FcFontList when this interval has passed since the last check.
 An interval setting of zero disables automatic checks.
 If <parameter>config</parameter> is NULL, the current configuration is used.
 @@

 @RET@           FcBool
 @FUNC@          FcConfigSetRescanInterval
 @TYPE1@         FcConfig *			@ARG1@		config
 @TYPE2@		int%                       	@ARG2@          rescanInterval
 @PURPOSE@	Set config rescan interval
 @DESC@
 Sets the rescan interval. Returns FcFalse if the interval cannot be set (due
 to allocation failure). Otherwise returns FcTrue.
 An interval setting of zero disables automatic checks.
 If <parameter>config</parameter> is NULL, the current configuration is used.
 @@

 @RET@           FcBool
 @FUNC@          FcConfigAppFontAddFile
 @TYPE1@         FcConfig *			@ARG1@		config
 @TYPE2@		const FcChar8 *			@ARG2@          file
 @PURPOSE@	Add font file to font database
 @DESC@
 Adds an application-specific font to the configuration. Returns FcFalse
 if the fonts cannot be added (due to allocation failure or no fonts found).
 Otherwise returns FcTrue. If <parameter>config</parameter> is NULL,
 the current configuration is used.
 @@

 @RET@           FcBool
 @FUNC@          FcConfigAppFontAddDir
 @TYPE1@         FcConfig *			@ARG1@		config
 @TYPE2@		const FcChar8 *			@ARG2@          dir
 @PURPOSE@	Add fonts from directory to font database
 @DESC@
 Scans the specified directory for fonts, adding each one found to the
 application-specific set of fonts. Returns FcFalse
 if the fonts cannot be added (due to allocation failure).
 Otherwise returns FcTrue. If <parameter>config</parameter> is NULL,
 the current configuration is used.
 @@

 @RET@           void
 @FUNC@          FcConfigAppFontClear
 @TYPE1@         FcConfig *                      @ARG1@          config
 @PURPOSE@	Remove all app fonts from font database
 @DESC@
 Clears the set of application-specific fonts.
 If <parameter>config</parameter> is NULL, the current configuration is used.
 @@

 @RET@           FcBool
 @FUNC@          FcConfigSubstituteWithPat
 @TYPE1@         FcConfig *			@ARG1@		config
 @TYPE2@		FcPattern *			@ARG2@		p
 @TYPE3@		FcPattern *			@ARG3@		p_pat
 @TYPE4@		FcMatchKind%                     @ARG4@          kind
 @PURPOSE@	Execute substitutions
 @DESC@
 Performs the sequence of pattern modification operations, if <parameter>kind</parameter> is
 FcMatchPattern, then those tagged as pattern operations are applied, else
 if <parameter>kind</parameter> is FcMatchFont, those tagged as font operations are applied and
 p_pat is used for &lt;test&gt; elements with target=pattern. Returns FcFalse
 if the substitution cannot be performed (due to allocation failure). Otherwise returns FcTrue.
 If <parameter>config</parameter> is NULL, the current configuration is used.
 @@

 @RET@           FcBool
 @FUNC@          FcConfigSubstitute
 @TYPE1@         FcConfig *			@ARG1@		config
 @TYPE2@		FcPattern *			@ARG2@		p
 @TYPE3@		FcMatchKind%                    @ARG3@          kind
 @PURPOSE@	Execute substitutions
 @DESC@
 Calls FcConfigSubstituteWithPat setting p_pat to NULL. Returns FcFalse
 if the substitution cannot be performed (due to allocation failure). Otherwise returns FcTrue.
 If <parameter>config</parameter> is NULL, the current configuration is used.
 @@

 @RET@           FcPattern *
 @FUNC@          FcFontMatch
 @TYPE1@         FcConfig *			@ARG1@		config
 @TYPE2@		FcPattern *			@ARG2@		p
 @TYPE3@		FcResult *                      @ARG3@          result
 @PURPOSE@	Return best font
 @DESC@
 Finds the font in <parameter>sets</parameter> most closely matching
 <parameter>pattern</parameter> and returns the result of
 <function>FcFontRenderPrepare</function> for that font and the provided
 pattern. This function should be called only after
 <function>FcConfigSubstitute</function> and
 <function>FcDefaultSubstitute</function> have been called for
 <parameter>p</parameter>; otherwise the results will not be correct.
 If <parameter>config</parameter> is NULL, the current configuration is used.
 @@

 @RET@           FcFontSet *
 @FUNC@          FcFontSort
 @TYPE1@         FcConfig *			@ARG1@		config
 @TYPE2@		FcPattern *			@ARG2@		p
 @TYPE3@		FcBool%				@ARG3@		trim
 @TYPE4@		FcCharSet **			@ARG4@		csp
 @TYPE5@		FcResult *                      @ARG5@          result
 @PURPOSE@	Return list of matching fonts
 @DESC@
 Returns the list of fonts sorted by closeness to <parameter>p</parameter>.  If <parameter>trim</parameter> is FcTrue,
 elements in the list which don't include Unicode coverage not provided by
 earlier elements in the list are elided.  The union of Unicode coverage of
 all of the fonts is returned in <parameter>csp</parameter>, if <parameter>csp</parameter> is not NULL.  This function
 should be called only after FcConfigSubstitute and FcDefaultSubstitute have
 been called for <parameter>p</parameter>; otherwise the results will not be correct.
     </para><para>
 The returned FcFontSet references FcPattern structures which may be shared
 by the return value from multiple FcFontSort calls, applications must not
 modify these patterns.  Instead, they should be passed, along with <parameter>p</parameter> to
 <function>FcFontRenderPrepare</function> which combines them into a complete pattern.
     </para><para>
 The FcFontSet returned by FcFontSort is destroyed by calling FcFontSetDestroy.
 If <parameter>config</parameter> is NULL, the current configuration is used.
 @@

 @RET@           FcPattern *
 @FUNC@          FcFontRenderPrepare
 @TYPE1@         FcConfig *			@ARG1@		config
 @TYPE2@		FcPattern *			@ARG2@		pat
 @TYPE3@		FcPattern *                     @ARG3@          font
 @PURPOSE@	Prepare pattern for loading font file
 @DESC@
 Creates a new pattern consisting of elements of <parameter>font</parameter> not appearing
 in <parameter>pat</parameter>, elements of <parameter>pat</parameter> not appearing in <parameter>font</parameter> and the best matching
 value from <parameter>pat</parameter> for elements appearing in both.  The result is passed to
 FcConfigSubstituteWithPat with <parameter>kind</parameter> FcMatchFont and then returned.
 @@

 @RET@           FcFontSet *
 @FUNC@          FcFontList
 @TYPE1@         FcConfig *			@ARG1@		config
 @TYPE2@		FcPattern *			@ARG2@		p
 @TYPE3@		FcObjectSet *                   @ARG3@          os
 @PURPOSE@	List fonts
 @DESC@
 Selects fonts matching <parameter>p</parameter>, creates patterns from those fonts containing
 only the objects in <parameter>os</parameter> and returns the set of unique such patterns.
 If <parameter>config</parameter> is NULL, the default configuration is checked
 to be up to date, and used.
 @@

 @RET@           FcChar8 *
 @FUNC@          FcConfigFilename
 @TYPE1@         const FcChar8 *			@ARG1@          name
 @PURPOSE@	Find a config file
 @DESC@
 This function is deprecated and is replaced by <function>FcConfigGetFilename</function>.
 @@

 @RET@           FcChar8 *
 @FUNC@          FcConfigGetFilename
 @TYPE1@         FcConfig *			@ARG1@          config
 @TYPE2@         const FcChar8 *			@ARG2@          name
 @PURPOSE@	Find a config file
 @DESC@
 Given the specified external entity name, return the associated filename.
 This provides applications a way to convert various configuration file
 references into filename form.
     </para><para>
 A null or empty <parameter>name</parameter> indicates that the default configuration file should
 be used; which file this references can be overridden with the
 FONTCONFIG_FILE environment variable.  Next, if the name starts with <parameter>~</parameter>, it
 refers to a file in the current users home directory.  Otherwise if the name
 doesn't start with '/', it refers to a file in the default configuration
 directory; the built-in default directory can be overridden with the
 FONTCONFIG_PATH environment variable.
     </para><para>
 The result of this function is affected by the FONTCONFIG_SYSROOT environment variable or equivalent functionality.
 @@

 @RET@		FcBool
 @FUNC@		FcConfigParseAndLoad
 @TYPE1@		FcConfig *			@ARG1@		config
 @TYPE2@		const FcChar8 *			@ARG2@		file
 @TYPE3@		FcBool%				@ARG3@		complain
 @PURPOSE@	load a configuration file
 @DESC@
 Walks the configuration in 'file' and constructs the internal representation
 in 'config'.  Any include files referenced from within 'file' will be loaded
 and parsed.  If 'complain' is FcFalse, no warning will be displayed if
 'file' does not exist. Error and warning messages will be output to stderr.
 Returns FcFalse if some error occurred while loading the file, either a
 parse error, semantic error or allocation failure. Otherwise returns FcTrue.
 @@

 @RET@		FcBool
 @FUNC@		FcConfigParseAndLoadFromMemory
 @TYPE1@		FcConfig *			@ARG1@		config
 @TYPE2@		const FcChar8 *			@ARG2@		buffer
 @TYPE3@		FcBool%				@ARG3@		complain
 @PURPOSE@	load a configuration from memory
 @DESC@
 Walks the configuration in 'memory' and constructs the internal representation
 in 'config'.  Any includes files referenced from within 'memory' will be loaded
 and dparsed.  If 'complain' is FcFalse, no warning will be displayed if
 'file' does not exist. Error and warning messages will be output to stderr.
 Returns FcFalse if fsome error occurred while loading the file, either a
 parse error, semantic error or allocation failure. Otherwise returns FcTrue.
 @SINCE@		2.12.5
 @@

 @RET@		const FcChar8 *
 @FUNC@		FcConfigGetSysRoot
 @TYPE1@		const FcConfig *		@ARG1@		config
 @PURPOSE@	Obtain the system root directory
 @DESC@
 Obtains the system root directory in 'config' if available. All files
 (including file properties in patterns) obtained from this 'config' are
 relative to this system root directory.
     </para><para>
 This function isn't MT-safe. <function>FcConfigReference</function> must be called
 before using this and then <function>FcConfigDestroy</function> when
 the return value is no longer referenced.
 @SINCE@		2.10.92
 @@

 @RET@		void
 @FUNC@		FcConfigSetSysRoot
 @TYPE1@		FcConfig *			@ARG1@		config
 @TYPE2@		const FcChar8 *			@ARG2@		sysroot
 @PURPOSE@	Set the system root directory
 @DESC@
 Set 'sysroot' as the system root directory. All file paths used or created with
 this 'config' (including file properties in patterns) will be considered or
 made relative to this 'sysroot'. This allows a host to generate caches for
 targets at build time. This also allows a cache to be re-targeted to a
 different base directory if 'FcConfigGetSysRoot' is used to resolve file paths.
 When setting this on the current config this causes changing current config
 (calls FcConfigSetCurrent()).
 @SINCE@		2.10.92
 @@

 @RET@		void
 @FUNC@		FcConfigFileInfoIterInit
 @TYPE1@		FcConfig *			@ARG1@		config
 @TYPE2@		FcConfigFileInfoIter *		@ARG2@		iter
 @PURPOSE@	Initialize the iterator
 @DESC@
 Initialize 'iter' with the first iterator in the config file information list.
     </para><para>
 This function isn't MT-safe. <function>FcConfigReference</function> must be called
 before using this and then <function>FcConfigDestroy</function> when the relevant
 values are no longer referenced.
 @SINCE@		2.12.91
 @@

 @RET@		FcBool
 @FUNC@		FcConfigFileInfoIterNext
 @TYPE1@		FcConfig *			@ARG1@		config
 @TYPE2@		FcConfigFileInfoIter *		@ARG2@		iter
 @PURPOSE@	Set the iterator to point to the next list
 @DESC@
 Set 'iter' to point to the next node in the config file information list.
 If there is no next node, FcFalse is returned.
     </para><para>
 This function isn't MT-safe. <function>FcConfigReference</function> must be called
 before using <function>FcConfigFileInfoIterInit</function> and then
 <function>FcConfigDestroy</function> when the relevant values are no longer referenced.
 @SINCE@		2.12.91
 @@

 @RET@		FcBool
 @FUNC@		FcConfigFileInfoIterGet
 @TYPE1@		FcConfig *			@ARG1@		config
 @TYPE2@		FcConfigFileInfoIter *		@ARG2@		iter
 @TYPE3@		FcChar8 **	     		@ARG3@		name
 @TYPE4@		FcChar8 **			@ARG4@		description
 @TYPE5@		FcBool *			@ARG5@		enabled
 @PURPOSE@	Obtain the configuration file information
 @DESC@
 Obtain the filename, the description and the flag whether it is enabled or not
 for 'iter' where points to current configuration file information.
 If the iterator is invalid, FcFalse is returned.
     </para><para>
 This function isn't MT-safe. <function>FcConfigReference</function> must be called
 before using <function>FcConfigFileInfoIterInit</function> and then
 <function>FcConfigDestroy</function> when the relevant values are no longer referenced.
 @SINCE@		2.12.91
 @@
	/*
	* fontconfig/doc/fcconfig.fncs
	*
	* Copyright © 2003 Keith Packard
	*
	* Permission to use, copy, modify, distribute, and sell this software and its
	* documentation for any purpose is hereby granted without fee, provided that
	* the above copyright notice appear in all copies and that both that
	* copyright notice and this permission notice appear in supporting
	* documentation, and that the name of the author(s) not be used in
	* advertising or publicity pertaining to distribution of the software without
	* specific, written prior permission. The authors make no
	* representations about the suitability of this software for any purpose. It
	* is provided "as is" without express or implied warranty.
	*
	* THE AUTHOR(S) DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
	* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
	* EVENT SHALL THE AUTHOR(S) BE LIABLE FOR ANY SPECIAL, INDIRECT OR
	* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
	* DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
	* TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
	* PERFORMANCE OF THIS SOFTWARE.
	*/
	@RET@ FcConfig *
	@FUNC@ FcConfigCreate
	@TYPE1@ void
	@PURPOSE@ Create a configuration
	@DESC@
	Creates an empty configuration.
	@@

	@RET@ FcConfig *
	@FUNC@ FcConfigReference
	@TYPE1@ FcConfig * @ARG1@ config
	@PURPOSE@ Increment config reference count
	@DESC@
	Add another reference to <parameter>config</parameter>. Configs are freed only
	when the reference count reaches zero.
	If <parameter>config</parameter> is NULL, the current configuration is used.
	In that case this function will be similar to FcConfigGetCurrent() except that
	it increments the reference count before returning and the user is responsible
	for destroying the configuration when not needed anymore.
	@@

	@RET@ void
	@FUNC@ FcConfigDestroy
	@TYPE1@ FcConfig * @ARG1@ config
	@PURPOSE@ Destroy a configuration
	@DESC@
	Decrements the config reference count. If all references are gone, destroys
	the configuration and any data associated with it.
	Note that calling this function with the return from FcConfigGetCurrent will
	cause a new configuration to be created for use as current configuration.
	@@

	@RET@ FcBool
	@FUNC@ FcConfigSetCurrent
	@TYPE1@ FcConfig * @ARG1@ config
	@PURPOSE@ Set configuration as default
	@DESC@
	Sets the current default configuration to <parameter>config</parameter>. Implicitly calls
	FcConfigBuildFonts if necessary, and FcConfigReference() to inrease the reference count
	in <parameter>config</parameter> since 2.12.0, returning FcFalse if that call fails.
	@@

	@RET@ FcConfig *
	@FUNC@ FcConfigGetCurrent
	@TYPE1@ void
	@PURPOSE@ Return current configuration
	@DESC@
	Returns the current default configuration.
	@@

	@RET@ FcBool
	@FUNC@ FcConfigUptoDate
	@TYPE1@ FcConfig * @ARG1@ config
	@PURPOSE@ Check timestamps on config files
	@DESC@
	Checks all of the files related to <parameter>config</parameter> and returns
	whether any of them has been modified since the configuration was created.
	If <parameter>config</parameter> is NULL, the current configuration is used.
	@@

	@RET@ FcChar8 *
	@FUNC@ FcConfigHome
	@TYPE1@ void
	@PURPOSE@ return the current home directory.
	@DESC@
	Return the current user's home directory, if it is available, and if using it
	is enabled, and NULL otherwise.
	See also <function>FcConfigEnableHome</function>).
	@@

	@RET@ FcBool
	@FUNC@ FcConfigEnableHome
	@TYPE1@ FcBool% @ARG1@ enable
	@PURPOSE@ controls use of the home directory.
	@DESC@
	If <parameter>enable</parameter> is FcTrue, then Fontconfig will use various
	files which are specified relative to the user's home directory (using the ~
	notation in the configuration). When <parameter>enable</parameter> is
	FcFalse, then all use of the home directory in these contexts will be
	disabled. The previous setting of the value is returned.
	@@

	@RET@ FcBool
	@FUNC@ FcConfigBuildFonts
	@TYPE1@ FcConfig * @ARG1@ config
	@PURPOSE@ Build font database
	@DESC@
	Builds the set of available fonts for the given configuration. Note that
	any changes to the configuration after this call have indeterminate effects.
	Returns FcFalse if this operation runs out of memory.
	If <parameter>config</parameter> is NULL, the current configuration is used.
	@@

	@RET@ FcStrList *
	@FUNC@ FcConfigGetConfigDirs
	@TYPE1@ FcConfig * @ARG1@ config
	@PURPOSE@ Get config directories
	@DESC@
	Returns the list of font directories specified in the configuration files
	for <parameter>config</parameter>. Does not include any subdirectories.
	If <parameter>config</parameter> is NULL, the current configuration is used.
	@@

	@RET@ FcStrList *
	@FUNC@ FcConfigGetFontDirs
	@TYPE1@ FcConfig * @ARG1@ config
	@PURPOSE@ Get font directories
	@DESC@
	Returns the list of font directories in <parameter>config</parameter>. This includes the
	configured font directories along with any directories below those in the
	filesystem.
	If <parameter>config</parameter> is NULL, the current configuration is used.
	@@

	@RET@ FcStrList *
	@FUNC@ FcConfigGetConfigFiles
	@TYPE1@ FcConfig * @ARG1@ config
	@PURPOSE@ Get config files
	@DESC@
	Returns the list of known configuration files used to generate <parameter>config</parameter>.
	If <parameter>config</parameter> is NULL, the current configuration is used.
	@@

	@RET@ FcChar8 *
	@FUNC@ FcConfigGetCache
	@TYPE1@ FcConfig * @ARG1@ config
	@PURPOSE@ DEPRECATED used to return per-user cache filename
	@DESC@
	With fontconfig no longer using per-user cache files, this function now
	simply returns NULL to indicate that no per-user file exists.
	@@

	@RET@ FcStrList *
	@FUNC@ FcConfigGetCacheDirs
	@TYPE1@ const FcConfig * @ARG1@ config
	@PURPOSE@ return the list of directories searched for cache files
	@DESC@
	<function>FcConfigGetCacheDirs</function> returns a string list containing
	all of the directories that fontconfig will search when attempting to load a
	cache file for a font directory.
	If <parameter>config</parameter> is NULL, the current configuration is used.
	@@

	@RET@ FcFontSet *
	@FUNC@ FcConfigGetFonts
	@TYPE1@ FcConfig * @ARG1@ config
	@TYPE2@ FcSetName% @ARG2@ set
	@PURPOSE@ Get config font set
	@DESC@
	Returns one of the two sets of fonts from the configuration as specified
	by <parameter>set</parameter>. This font set is owned by the library and must
	not be modified or freed.
	If <parameter>config</parameter> is NULL, the current configuration is used.
	</para><para>
	This function isn't MT-safe. <function>FcConfigReference</function> must be called
	before using this and then <function>FcConfigDestroy</function> when
	the return value is no longer referenced.
	@@

	@RET@ FcBlanks *
	@FUNC@ FcConfigGetBlanks
	@TYPE1@ FcConfig * @ARG1@ config
	@PURPOSE@ Get config blanks
	@DESC@
	FcBlanks is deprecated.
	This function always returns NULL.
	@@

	@RET@ int
	@FUNC@ FcConfigGetRescanInterval
	@TYPE1@ FcConfig * @ARG1@ config
	@PURPOSE@ Get config rescan interval
	@DESC@
	Returns the interval between automatic checks of the configuration (in
	seconds) specified in <parameter>config</parameter>. The configuration is checked during
	a call to FcFontList when this interval has passed since the last check.
	An interval setting of zero disables automatic checks.
	If <parameter>config</parameter> is NULL, the current configuration is used.
	@@

	@RET@ FcBool
	@FUNC@ FcConfigSetRescanInterval
	@TYPE1@ FcConfig * @ARG1@ config
	@TYPE2@ int% @ARG2@ rescanInterval
	@PURPOSE@ Set config rescan interval
	@DESC@
	Sets the rescan interval. Returns FcFalse if the interval cannot be set (due
	to allocation failure). Otherwise returns FcTrue.
	An interval setting of zero disables automatic checks.
	If <parameter>config</parameter> is NULL, the current configuration is used.
	@@

	@RET@ FcBool
	@FUNC@ FcConfigAppFontAddFile
	@TYPE1@ FcConfig * @ARG1@ config
	@TYPE2@ const FcChar8 * @ARG2@ file
	@PURPOSE@ Add font file to font database
	@DESC@
	Adds an application-specific font to the configuration. Returns FcFalse
	if the fonts cannot be added (due to allocation failure or no fonts found).
	Otherwise returns FcTrue. If <parameter>config</parameter> is NULL,
	the current configuration is used.
	@@

	@RET@ FcBool
	@FUNC@ FcConfigAppFontAddDir
	@TYPE1@ FcConfig * @ARG1@ config
	@TYPE2@ const FcChar8 * @ARG2@ dir
	@PURPOSE@ Add fonts from directory to font database
	@DESC@
	Scans the specified directory for fonts, adding each one found to the
	application-specific set of fonts. Returns FcFalse
	if the fonts cannot be added (due to allocation failure).
	Otherwise returns FcTrue. If <parameter>config</parameter> is NULL,
	the current configuration is used.
	@@

	@RET@ void
	@FUNC@ FcConfigAppFontClear
	@TYPE1@ FcConfig * @ARG1@ config
	@PURPOSE@ Remove all app fonts from font database
	@DESC@
	Clears the set of application-specific fonts.
	If <parameter>config</parameter> is NULL, the current configuration is used.
	@@

	@RET@ FcBool
	@FUNC@ FcConfigSubstituteWithPat
	@TYPE1@ FcConfig * @ARG1@ config
	@TYPE2@ FcPattern * @ARG2@ p
	@TYPE3@ FcPattern * @ARG3@ p_pat
	@TYPE4@ FcMatchKind% @ARG4@ kind
	@PURPOSE@ Execute substitutions
	@DESC@
	Performs the sequence of pattern modification operations, if <parameter>kind</parameter> is
	FcMatchPattern, then those tagged as pattern operations are applied, else
	if <parameter>kind</parameter> is FcMatchFont, those tagged as font operations are applied and
	p_pat is used for <test> elements with target=pattern. Returns FcFalse
	if the substitution cannot be performed (due to allocation failure). Otherwise returns FcTrue.
	If <parameter>config</parameter> is NULL, the current configuration is used.
	@@

	@RET@ FcBool
	@FUNC@ FcConfigSubstitute
	@TYPE1@ FcConfig * @ARG1@ config
	@TYPE2@ FcPattern * @ARG2@ p
	@TYPE3@ FcMatchKind% @ARG3@ kind
	@PURPOSE@ Execute substitutions
	@DESC@
	Calls FcConfigSubstituteWithPat setting p_pat to NULL. Returns FcFalse
	if the substitution cannot be performed (due to allocation failure). Otherwise returns FcTrue.
	If <parameter>config</parameter> is NULL, the current configuration is used.
	@@

	@RET@ FcPattern *
	@FUNC@ FcFontMatch
	@TYPE1@ FcConfig * @ARG1@ config
	@TYPE2@ FcPattern * @ARG2@ p
	@TYPE3@ FcResult * @ARG3@ result
	@PURPOSE@ Return best font
	@DESC@
	Finds the font in <parameter>sets</parameter> most closely matching
	<parameter>pattern</parameter> and returns the result of
	<function>FcFontRenderPrepare</function> for that font and the provided
	pattern. This function should be called only after
	<function>FcConfigSubstitute</function> and
	<function>FcDefaultSubstitute</function> have been called for
	<parameter>p</parameter>; otherwise the results will not be correct.
	If <parameter>config</parameter> is NULL, the current configuration is used.
	@@

	@RET@ FcFontSet *
	@FUNC@ FcFontSort
	@TYPE1@ FcConfig * @ARG1@ config
	@TYPE2@ FcPattern * @ARG2@ p
	@TYPE3@ FcBool% @ARG3@ trim
	@TYPE4@ FcCharSet ** @ARG4@ csp
	@TYPE5@ FcResult * @ARG5@ result
	@PURPOSE@ Return list of matching fonts
	@DESC@
	Returns the list of fonts sorted by closeness to <parameter>p</parameter>. If <parameter>trim</parameter> is FcTrue,
	elements in the list which don't include Unicode coverage not provided by
	earlier elements in the list are elided. The union of Unicode coverage of
	all of the fonts is returned in <parameter>csp</parameter>, if <parameter>csp</parameter> is not NULL. This function
	should be called only after FcConfigSubstitute and FcDefaultSubstitute have
	been called for <parameter>p</parameter>; otherwise the results will not be correct.
	</para><para>
	The returned FcFontSet references FcPattern structures which may be shared
	by the return value from multiple FcFontSort calls, applications must not
	modify these patterns. Instead, they should be passed, along with <parameter>p</parameter> to
	<function>FcFontRenderPrepare</function> which combines them into a complete pattern.
	</para><para>
	The FcFontSet returned by FcFontSort is destroyed by calling FcFontSetDestroy.
	If <parameter>config</parameter> is NULL, the current configuration is used.
	@@

	@RET@ FcPattern *
	@FUNC@ FcFontRenderPrepare
	@TYPE1@ FcConfig * @ARG1@ config
	@TYPE2@ FcPattern * @ARG2@ pat
	@TYPE3@ FcPattern * @ARG3@ font
	@PURPOSE@ Prepare pattern for loading font file
	@DESC@
	Creates a new pattern consisting of elements of <parameter>font</parameter> not appearing
	in <parameter>pat</parameter>, elements of <parameter>pat</parameter> not appearing in <parameter>font</parameter> and the best matching
	value from <parameter>pat</parameter> for elements appearing in both. The result is passed to
	FcConfigSubstituteWithPat with <parameter>kind</parameter> FcMatchFont and then returned.
	@@

	@RET@ FcFontSet *
	@FUNC@ FcFontList
	@TYPE1@ FcConfig * @ARG1@ config
	@TYPE2@ FcPattern * @ARG2@ p
	@TYPE3@ FcObjectSet * @ARG3@ os
	@PURPOSE@ List fonts
	@DESC@
	Selects fonts matching <parameter>p</parameter>, creates patterns from those fonts containing
	only the objects in <parameter>os</parameter> and returns the set of unique such patterns.
	If <parameter>config</parameter> is NULL, the default configuration is checked
	to be up to date, and used.
	@@

	@RET@ FcChar8 *
	@FUNC@ FcConfigFilename
	@TYPE1@ const FcChar8 * @ARG1@ name
	@PURPOSE@ Find a config file
	@DESC@
	This function is deprecated and is replaced by <function>FcConfigGetFilename</function>.
	@@

	@RET@ FcChar8 *
	@FUNC@ FcConfigGetFilename
	@TYPE1@ FcConfig * @ARG1@ config
	@TYPE2@ const FcChar8 * @ARG2@ name
	@PURPOSE@ Find a config file
	@DESC@
	Given the specified external entity name, return the associated filename.
	This provides applications a way to convert various configuration file
	references into filename form.
	</para><para>
	A null or empty <parameter>name</parameter> indicates that the default configuration file should
	be used; which file this references can be overridden with the
	FONTCONFIG_FILE environment variable. Next, if the name starts with <parameter>~</parameter>, it
	refers to a file in the current users home directory. Otherwise if the name
	doesn't start with '/', it refers to a file in the default configuration
	directory; the built-in default directory can be overridden with the
	FONTCONFIG_PATH environment variable.
	</para><para>
	The result of this function is affected by the FONTCONFIG_SYSROOT environment variable or equivalent functionality.
	@@

	@RET@ FcBool
	@FUNC@ FcConfigParseAndLoad
	@TYPE1@ FcConfig * @ARG1@ config
	@TYPE2@ const FcChar8 * @ARG2@ file
	@TYPE3@ FcBool% @ARG3@ complain
	@PURPOSE@ load a configuration file
	@DESC@
	Walks the configuration in 'file' and constructs the internal representation
	in 'config'. Any include files referenced from within 'file' will be loaded
	and parsed. If 'complain' is FcFalse, no warning will be displayed if
	'file' does not exist. Error and warning messages will be output to stderr.
	Returns FcFalse if some error occurred while loading the file, either a
	parse error, semantic error or allocation failure. Otherwise returns FcTrue.
	@@

	@RET@ FcBool
	@FUNC@ FcConfigParseAndLoadFromMemory
	@TYPE1@ FcConfig * @ARG1@ config
	@TYPE2@ const FcChar8 * @ARG2@ buffer
	@TYPE3@ FcBool% @ARG3@ complain
	@PURPOSE@ load a configuration from memory
	@DESC@
	Walks the configuration in 'memory' and constructs the internal representation
	in 'config'. Any includes files referenced from within 'memory' will be loaded
	and dparsed. If 'complain' is FcFalse, no warning will be displayed if
	'file' does not exist. Error and warning messages will be output to stderr.
	Returns FcFalse if fsome error occurred while loading the file, either a
	parse error, semantic error or allocation failure. Otherwise returns FcTrue.
	@SINCE@ 2.12.5
	@@

	@RET@ const FcChar8 *
	@FUNC@ FcConfigGetSysRoot
	@TYPE1@ const FcConfig * @ARG1@ config
	@PURPOSE@ Obtain the system root directory
	@DESC@
	Obtains the system root directory in 'config' if available. All files
	(including file properties in patterns) obtained from this 'config' are
	relative to this system root directory.
	</para><para>
	This function isn't MT-safe. <function>FcConfigReference</function> must be called
	before using this and then <function>FcConfigDestroy</function> when
	the return value is no longer referenced.
	@SINCE@ 2.10.92
	@@

	@RET@ void
	@FUNC@ FcConfigSetSysRoot
	@TYPE1@ FcConfig * @ARG1@ config
	@TYPE2@ const FcChar8 * @ARG2@ sysroot
	@PURPOSE@ Set the system root directory
	@DESC@
	Set 'sysroot' as the system root directory. All file paths used or created with
	this 'config' (including file properties in patterns) will be considered or
	made relative to this 'sysroot'. This allows a host to generate caches for
	targets at build time. This also allows a cache to be re-targeted to a
	different base directory if 'FcConfigGetSysRoot' is used to resolve file paths.
	When setting this on the current config this causes changing current config
	(calls FcConfigSetCurrent()).
	@SINCE@ 2.10.92
	@@

	@RET@ void
	@FUNC@ FcConfigFileInfoIterInit
	@TYPE1@ FcConfig * @ARG1@ config
	@TYPE2@ FcConfigFileInfoIter * @ARG2@ iter
	@PURPOSE@ Initialize the iterator
	@DESC@
	Initialize 'iter' with the first iterator in the config file information list.
	</para><para>
	This function isn't MT-safe. <function>FcConfigReference</function> must be called
	before using this and then <function>FcConfigDestroy</function> when the relevant
	values are no longer referenced.
	@SINCE@ 2.12.91
	@@

	@RET@ FcBool
	@FUNC@ FcConfigFileInfoIterNext
	@TYPE1@ FcConfig * @ARG1@ config
	@TYPE2@ FcConfigFileInfoIter * @ARG2@ iter
	@PURPOSE@ Set the iterator to point to the next list
	@DESC@
	Set 'iter' to point to the next node in the config file information list.
	If there is no next node, FcFalse is returned.
	</para><para>
	This function isn't MT-safe. <function>FcConfigReference</function> must be called
	before using <function>FcConfigFileInfoIterInit</function> and then
	<function>FcConfigDestroy</function> when the relevant values are no longer referenced.
	@SINCE@ 2.12.91
	@@

	@RET@ FcBool
	@FUNC@ FcConfigFileInfoIterGet
	@TYPE1@ FcConfig * @ARG1@ config
	@TYPE2@ FcConfigFileInfoIter * @ARG2@ iter
	@TYPE3@ FcChar8 ** @ARG3@ name
	@TYPE4@ FcChar8 ** @ARG4@ description
	@TYPE5@ FcBool * @ARG5@ enabled
	@PURPOSE@ Obtain the configuration file information
	@DESC@
	Obtain the filename, the description and the flag whether it is enabled or not
	for 'iter' where points to current configuration file information.
	If the iterator is invalid, FcFalse is returned.
	</para><para>
	This function isn't MT-safe. <function>FcConfigReference</function> must be called
	before using <function>FcConfigFileInfoIterInit</function> and then
	<function>FcConfigDestroy</function> when the relevant values are no longer referenced.
	@SINCE@ 2.12.91
	@@