| /* |
| * Copyright 2014 The Android Open Source Project |
| * |
| * Use of this source code is governed by a BSD-style license that can be |
| * found in the LICENSE file. |
| */ |
| |
| #if defined(__clang__) || (defined(__GNUC__) && !defined(SK_BUILD_FOR_MAC)) |
| |
| #define CFI_PUSH(REG) \ |
| .cfi_adjust_cfa_offset 4; \ |
| .cfi_rel_offset REG, 0 |
| |
| #define CFI_POP(REG) \ |
| .cfi_adjust_cfa_offset -4; \ |
| .cfi_restore REG |
| |
| #define PUSH(REG) pushl REG; CFI_PUSH (REG) |
| #define POP(REG) popl REG; CFI_POP (REG) |
| #define RETURN POP(%edi); ret |
| |
| #define EXTRACT_ALPHA(var1, var2) \ |
| movdqa %var1, %var2; /* Clone source pixels to extract alpha */\ |
| psrlw $8, %var2; /* Discard red and blue, leaving alpha and green */\ |
| pshufhw $0xF5, %var2, %var2; /* Repeat alpha for scaling (high) */\ |
| movdqa %xmm6, %xmm4; \ |
| pshuflw $0xF5, %var2, %var2; /* Repeat alpha for scaling (low) */\ |
| movdqa %xmm5, %xmm3; \ |
| psubw %var2, %xmm4 /* Finalize alpha calculations */ |
| |
| #define SCALE_PIXELS \ |
| psllw $8, %xmm5; /* Filter out red and blue components */\ |
| pmulhuw %xmm4, %xmm5; /* Scale red and blue */\ |
| psrlw $8, %xmm3; /* Filter out alpha and green components */\ |
| pmullw %xmm4, %xmm3 /* Scale alpha and green */ |
| |
| |
| /* |
| * void S32A_Opaque_BlitRow32_SSE4(SkPMColor* SK_RESTRICT dst, |
| * const SkPMColor* SK_RESTRICT src, |
| * int count, U8CPU alpha) |
| * |
| * This function is divided into six blocks: initialization, blit 4-15 pixels, |
| * blit 0-3 pixels, align destination for 16+ pixel blits, |
| * blit 16+ pixels with source unaligned, blit 16+ pixels with source aligned. |
| * There are some code reuse between the blocks. |
| * |
| * The primary optimization comes from checking the source pixels' alpha value. |
| * If the alpha is zero, the pixel can be skipped entirely. |
| * If the alpha is fully opaque, the pixel can be copied directly to the destination. |
| * According to collected statistics, these two cases are the most common. |
| * The main loop(s) uses pre-loading and unrolling in an attempt to reduce the |
| * memory latency worse-case. |
| */ |
| |
| #ifdef __clang__ |
| .text |
| #else |
| .section .text.sse4.2,"ax",@progbits |
| .type S32A_Opaque_BlitRow32_SSE4_asm, @function |
| #endif |
| .p2align 4 |
| #if defined(SK_BUILD_FOR_MAC) |
| .global _S32A_Opaque_BlitRow32_SSE4_asm |
| .private_extern _S32A_Opaque_BlitRow32_SSE4_asm |
| _S32A_Opaque_BlitRow32_SSE4_asm: |
| #else |
| .global S32A_Opaque_BlitRow32_SSE4_asm |
| .hidden S32A_Opaque_BlitRow32_SSE4_asm |
| S32A_Opaque_BlitRow32_SSE4_asm: |
| #endif |
| .cfi_startproc |
| movl 8(%esp), %eax // Source pointer |
| movl 12(%esp), %ecx // Pixel count |
| movl 4(%esp), %edx // Destination pointer |
| prefetcht0 (%eax) |
| |
| // Setup SSE constants |
| pcmpeqd %xmm7, %xmm7 // 0xFF000000 mask to check alpha |
| pslld $24, %xmm7 |
| pcmpeqw %xmm6, %xmm6 // 16-bit 256 to calculate inv. alpha |
| psrlw $15, %xmm6 |
| psllw $8, %xmm6 |
| pcmpeqw %xmm0, %xmm0 // 0x00FF00FF mask (Must be in xmm0 because of pblendvb) |
| psrlw $8, %xmm0 |
| subl $4, %ecx // Check if we have only 0-3 pixels |
| js .LReallySmall |
| PUSH(%edi) |
| cmpl $11, %ecx // Do we have enough pixels to run the main loop? |
| ja .LBigBlit |
| |
| // Handle small blits (4-15 pixels) |
| //////////////////////////////////////////////////////////////////////////////// |
| xorl %edi, %edi // Reset offset to zero |
| |
| .LSmallLoop: |
| lddqu (%eax, %edi), %xmm1 // Load four source pixels |
| ptest %xmm7, %xmm1 // Check if all alphas are zero or opaque |
| ja .LSmallAlphaNotOpaqueOrZero |
| jz .LSmallAlphaZero // If all alphas are zero, skip the pixels completely |
| movdqu %xmm1, (%edx, %edi) // Store four destination pixels |
| .LSmallAlphaZero: |
| addl $16, %edi |
| subl $4, %ecx // Check if there are four additional pixels, at least |
| jns .LSmallLoop |
| jmp .LSmallRemaining |
| |
| // Handle mixed alphas (calculate and scale) |
| .p2align 4 |
| .LSmallAlphaNotOpaqueOrZero: |
| lddqu (%edx, %edi), %xmm5 // Load four destination pixels |
| EXTRACT_ALPHA(xmm1, xmm2) // Extract and clone alpha value |
| SCALE_PIXELS // Scale pixels using alpha |
| |
| addl $16, %edi |
| subl $4, %ecx // Check if there are four additional pixels, at least |
| pblendvb %xmm5, %xmm3 // Mask in %xmm0, implicitly |
| paddb %xmm3, %xmm1 // Add source and destination pixels together |
| movdqu %xmm1, -16(%edx, %edi) // Store four destination pixels |
| jns .LSmallLoop |
| |
| // Handle the last 0-3 pixels (also used by the main loops) |
| .LSmallRemaining: |
| cmpl $-4, %ecx // Check if we are done |
| je .LSmallExit |
| sall $2, %ecx // Calculate offset for last pixels |
| addl %ecx, %edi |
| |
| lddqu (%eax, %edi), %xmm1 // Load last four source pixels (overlapping) |
| ptest %xmm7, %xmm1 // Check if all alphas are zero or opaque |
| jc .LSmallRemainingStoreAll// If all alphas are opaque, just store (overlapping) |
| jz .LSmallExit // If all alphas are zero, skip the pixels completely |
| |
| // Handle mixed alphas (calculate and scale) |
| lddqu (%edx, %edi), %xmm5 // Load last four destination pixels (overlapping) |
| EXTRACT_ALPHA(xmm1, xmm2) // Extract and clone alpha value |
| |
| psllw $8, %xmm3 // Filter out red and blue components |
| pmulhuw %xmm4, %xmm3 // Scale red and blue |
| movdqa %xmm5, %xmm2 |
| psrlw $8, %xmm2 // Filter out alpha and green components |
| pmullw %xmm4, %xmm2 // Scale alpha and green |
| |
| cmpl $-8, %ecx // Check how many pixels should be written |
| pblendvb %xmm3, %xmm2 // Combine results (mask in %xmm0, implicitly) |
| paddb %xmm2, %xmm1 // Add source and destination pixels together |
| jb .LSmallPixelsLeft1 |
| ja .LSmallPixelsLeft3 // To avoid double-blending the overlapping pixels... |
| pblendw $0xF0, %xmm1, %xmm5 // Merge only the final two pixels to the destination |
| movdqu %xmm5, (%edx, %edi) // Store last two destination pixels |
| .LSmallExit: |
| RETURN |
| |
| .LSmallPixelsLeft1: |
| pblendw $0xC0, %xmm1, %xmm5 // Merge only the final pixel to the destination |
| movdqu %xmm5, (%edx, %edi) // Store last destination pixel |
| RETURN |
| |
| .LSmallPixelsLeft3: |
| pblendw $0xFC, %xmm1, %xmm5 // Merge only the final three pixels to the destination |
| movdqu %xmm5, (%edx, %edi) // Store last three destination pixels |
| RETURN |
| |
| .LSmallRemainingStoreAll: |
| movdqu %xmm1, (%edx, %edi) // Store last destination pixels (overwrite) |
| RETURN |
| |
| // Handle really small blits (0-3 pixels) |
| //////////////////////////////////////////////////////////////////////////////// |
| .LReallySmall: |
| addl $4, %ecx |
| jle .LReallySmallExit |
| pcmpeqd %xmm1, %xmm1 |
| cmp $2, %ecx // Check how many pixels should be read |
| pinsrd $0x0, (%eax), %xmm1 // Load one source pixel |
| pinsrd $0x0, (%edx), %xmm5 // Load one destination pixel |
| jb .LReallySmallCalc |
| pinsrd $0x1, 4(%eax), %xmm1 // Load second source pixel |
| pinsrd $0x1, 4(%edx), %xmm5 // Load second destination pixel |
| je .LReallySmallCalc |
| pinsrd $0x2, 8(%eax), %xmm1 // Load third source pixel |
| pinsrd $0x2, 8(%edx), %xmm5 // Load third destination pixel |
| |
| .LReallySmallCalc: |
| ptest %xmm7, %xmm1 // Check if all alphas are opaque |
| jc .LReallySmallStore // If all alphas are opaque, just store |
| |
| // Handle mixed alphas (calculate and scale) |
| EXTRACT_ALPHA(xmm1, xmm2) // Extract and clone alpha value |
| |
| pand %xmm0, %xmm5 // Filter out red and blue components |
| pmullw %xmm4, %xmm5 // Scale red and blue |
| psrlw $8, %xmm3 // Filter out alpha and green components |
| pmullw %xmm4, %xmm3 // Scale alpha and green |
| |
| psrlw $8, %xmm5 // Combine results |
| pblendvb %xmm5, %xmm3 // Mask in %xmm0, implicitly |
| paddb %xmm3, %xmm1 // Add source and destination pixels together |
| |
| .LReallySmallStore: |
| cmp $2, %ecx // Check how many pixels should be written |
| pextrd $0x0, %xmm1, (%edx) // Store one destination pixel |
| jb .LReallySmallExit |
| pextrd $0x1, %xmm1, 4(%edx) // Store second destination pixel |
| je .LReallySmallExit |
| pextrd $0x2, %xmm1, 8(%edx) // Store third destination pixel |
| .LReallySmallExit: |
| ret |
| |
| // Handle bigger blit operations (16+ pixels) |
| //////////////////////////////////////////////////////////////////////////////// |
| .p2align 4 |
| .LBigBlit: |
| // Align destination? |
| testl $0xF, %edx |
| lddqu (%eax), %xmm1 // Pre-load four source pixels |
| jz .LAligned |
| |
| movl %edx, %edi // Calculate alignment of destination pointer |
| negl %edi |
| andl $0xF, %edi |
| |
| // Handle 1-3 pixels to align destination |
| ptest %xmm7, %xmm1 // Check if all alphas are zero or opaque |
| jz .LAlignDone // If all alphas are zero, just skip |
| lddqu (%edx), %xmm5 // Load four destination pixels |
| jc .LAlignStore // If all alphas are opaque, just store |
| |
| // Handle mixed alphas (calculate and scale) |
| EXTRACT_ALPHA(xmm1, xmm2) // Extract and clone alpha value |
| |
| psllw $8, %xmm3 // Filter out red and blue components |
| pmulhuw %xmm4, %xmm3 // Scale red and blue |
| movdqa %xmm5, %xmm2 |
| psrlw $8, %xmm2 // Filter out alpha and green components |
| pmullw %xmm4, %xmm2 // Scale alpha and green |
| |
| pblendvb %xmm3, %xmm2 // Combine results (mask in %xmm0, implicitly) |
| paddb %xmm2, %xmm1 // Add source and destination pixels together |
| |
| .LAlignStore: |
| cmp $8, %edi // Check how many pixels should be written |
| jb .LAlignPixelsLeft1 |
| ja .LAlignPixelsLeft3 |
| pblendw $0x0F, %xmm1, %xmm5 // Blend two pixels |
| jmp .LAlignStorePixels |
| |
| .LAlignPixelsLeft1: |
| pblendw $0x03, %xmm1, %xmm5 // Blend one pixel |
| jmp .LAlignStorePixels |
| |
| .LAlignPixelsLeft3: |
| pblendw $0x3F, %xmm1, %xmm5 // Blend three pixels |
| |
| .LAlignStorePixels: |
| movdqu %xmm5, (%edx) // Store destination pixels |
| |
| .LAlignDone: |
| addl %edi, %eax // Adjust pointers and pixel count |
| addl %edi, %edx |
| shrl $2, %edi |
| lddqu (%eax), %xmm1 // Pre-load new source pixels (after alignment) |
| subl %edi, %ecx |
| |
| .LAligned: // Destination is guaranteed to be 16 byte aligned |
| xorl %edi, %edi // Reset offset to zero |
| subl $8, %ecx // Decrease counter (Reserve four pixels for the cleanup) |
| testl $0xF, %eax // Check alignment of source pointer |
| jz .LAlignedLoop |
| |
| // Source not aligned to destination |
| //////////////////////////////////////////////////////////////////////////////// |
| .p2align 4 |
| .LUnalignedLoop: // Main loop for unaligned, handles eight pixels per iteration |
| ptest %xmm7, %xmm1 // Check if all alphas are zero or opaque |
| ja .LAlphaNotOpaqueOrZero00 |
| lddqu 16(%eax, %edi), %xmm2 // Pre-load four source pixels |
| jz .LAlphaZero00 |
| movdqa %xmm1, (%edx, %edi) // Store four destination pixels |
| |
| .LAlphaZero00: |
| ptest %xmm7, %xmm2 // Check if all alphas are zero or opaque |
| ja .LAlphaNotOpaqueOrZero01 |
| lddqu 32(%eax, %edi), %xmm1 // Pre-load four source pixels |
| jz .LAlphaZero01 |
| movdqa %xmm2, 16(%edx, %edi) // Store four destination pixels |
| |
| .LAlphaZero01: |
| addl $32, %edi // Adjust offset and pixel count |
| subl $8, %ecx |
| jae .LUnalignedLoop |
| addl $8, %ecx // Adjust pixel count |
| jmp .LLoopCleanup0 |
| |
| .p2align 4 |
| .LAlphaNotOpaqueOrZero00: |
| movdqa (%edx, %edi), %xmm5 // Load four destination pixels |
| EXTRACT_ALPHA(xmm1, xmm2) // Extract and clone alpha value |
| SCALE_PIXELS // Scale pixels using alpha |
| |
| lddqu 16(%eax, %edi), %xmm2 // Pre-load four source pixels |
| pblendvb %xmm5, %xmm3 // Combine results (mask in %xmm0, implicitly) |
| paddb %xmm3, %xmm1 // Add source and destination pixels together |
| movdqa %xmm1, (%edx, %edi) // Store four destination pixels |
| |
| // Handle next four pixels |
| ptest %xmm7, %xmm2 // Check if all alphas are zero or opaque |
| ja .LAlphaNotOpaqueOrZero01 |
| lddqu 32(%eax, %edi), %xmm1 // Pre-load four source pixels |
| jz .LAlphaZero02 |
| movdqa %xmm2, 16(%edx, %edi) // Store four destination pixels |
| .LAlphaZero02: |
| addl $32, %edi // Adjust offset and pixel count |
| subl $8, %ecx |
| jae .LUnalignedLoop |
| addl $8, %ecx // Adjust pixel count |
| jmp .LLoopCleanup0 |
| |
| .p2align 4 |
| .LAlphaNotOpaqueOrZero01: |
| movdqa 16(%edx, %edi), %xmm5 // Load four destination pixels |
| EXTRACT_ALPHA(xmm2, xmm1) // Extract and clone alpha value |
| SCALE_PIXELS // Scale pixels using alpha |
| |
| lddqu 32(%eax, %edi), %xmm1 // Pre-load four source pixels |
| addl $32, %edi |
| pblendvb %xmm5, %xmm3 // Combine results (mask in %xmm0, implicitly) |
| paddb %xmm3, %xmm2 // Add source and destination pixels together |
| subl $8, %ecx |
| movdqa %xmm2, -16(%edx, %edi) // Store four destination pixels |
| jae .LUnalignedLoop |
| addl $8, %ecx // Adjust pixel count |
| |
| // Cleanup - handle pending pixels from loop |
| .LLoopCleanup0: |
| ptest %xmm7, %xmm1 // Check if all alphas are zero or opaque |
| ja .LAlphaNotOpaqueOrZero02 |
| jz .LAlphaZero03 |
| movdqa %xmm1, (%edx, %edi) // Store four destination pixels |
| .LAlphaZero03: |
| addl $16, %edi |
| subl $4, %ecx |
| js .LSmallRemaining // Reuse code from small loop |
| |
| .LRemain0: |
| lddqu (%eax, %edi), %xmm1 // Load four source pixels |
| ptest %xmm7, %xmm1 // Check if all alphas are zero or opaque |
| ja .LAlphaNotOpaqueOrZero02 |
| jz .LAlphaZero04 |
| movdqa %xmm1, (%edx, %edi) // Store four destination pixels |
| .LAlphaZero04: |
| addl $16, %edi |
| subl $4, %ecx |
| jmp .LSmallRemaining // Reuse code from small loop |
| |
| .LAlphaNotOpaqueOrZero02: |
| movdqa (%edx, %edi), %xmm5 // Load four destination pixels |
| EXTRACT_ALPHA(xmm1, xmm2) // Extract and clone alpha value |
| SCALE_PIXELS // Scale pixels using alpha |
| |
| addl $16, %edi |
| subl $4, %ecx |
| pblendvb %xmm5, %xmm3 // Combine results (mask in %xmm0, implicitly) |
| paddb %xmm3, %xmm1 // Add source and destination pixels together |
| movdqa %xmm1, -16(%edx, %edi) // Store four destination pixels |
| js .LSmallRemaining // Reuse code from small loop |
| jmp .LRemain0 |
| |
| // Source aligned to destination |
| //////////////////////////////////////////////////////////////////////////////// |
| .p2align 4 |
| .LAlignedLoop: // Main loop for aligned, handles eight pixels per iteration |
| ptest %xmm7, %xmm1 // Check if all alphas are zero or opaque |
| ja .LAlphaNotOpaqueOrZero10 |
| movdqa 16(%eax, %edi), %xmm2 // Pre-load four source pixels |
| jz .LAlphaZero10 |
| movdqa %xmm1, (%edx, %edi) // Store four destination pixels |
| |
| .LAlphaZero10: |
| ptest %xmm7, %xmm2 // Check if all alphas are zero or opaque |
| ja .LAlphaNotOpaqueOrZero11 |
| movdqa 32(%eax, %edi), %xmm1 // Pre-load four source pixels |
| jz .LAlphaZero11 |
| movdqa %xmm2, 16(%edx, %edi) // Store four destination pixels |
| |
| .LAlphaZero11: |
| addl $32, %edi // Adjust offset and pixel count |
| subl $8, %ecx |
| jae .LAlignedLoop |
| addl $8, %ecx // Adjust pixel count |
| jmp .LLoopCleanup1 |
| |
| .p2align 4 |
| .LAlphaNotOpaqueOrZero10: |
| movdqa (%edx, %edi), %xmm5 // Load four destination pixels |
| EXTRACT_ALPHA(xmm1, xmm2) // Extract and clone alpha value |
| SCALE_PIXELS // Scale pixels using alpha |
| |
| movdqa 16(%eax, %edi), %xmm2 // Pre-load four source pixels |
| pblendvb %xmm5, %xmm3 // Combine results (mask in %xmm0, implicitly) |
| paddb %xmm3, %xmm1 // Add source and destination pixels together |
| movdqa %xmm1, (%edx, %edi) // Store four destination pixels |
| |
| // Handle next four pixels |
| ptest %xmm7, %xmm2 // Check if all alphas are zero or opaque |
| ja .LAlphaNotOpaqueOrZero11 |
| movdqa 32(%eax, %edi), %xmm1 // Pre-load four source pixels |
| jz .LAlphaZero12 |
| movdqa %xmm2, 16(%edx, %edi) // Store four destination pixels |
| .LAlphaZero12: |
| addl $32, %edi // Adjust offset and pixel count |
| subl $8, %ecx |
| jae .LAlignedLoop |
| addl $8, %ecx // Adjust pixel count |
| jmp .LLoopCleanup1 |
| |
| .p2align 4 |
| .LAlphaNotOpaqueOrZero11: |
| movdqa 16(%edx, %edi), %xmm5 // Load four destination pixels |
| EXTRACT_ALPHA(xmm2, xmm1) // Extract and clone alpha value |
| SCALE_PIXELS // Scale pixels using alpha |
| movdqa 32(%eax, %edi), %xmm1 // Pre-load four source pixels |
| |
| addl $32, %edi |
| pblendvb %xmm5, %xmm3 // Combine results (mask in %xmm0, implicitly) |
| paddb %xmm3, %xmm2 // Add source and destination pixels together |
| subl $8, %ecx |
| movdqa %xmm2, -16(%edx, %edi) // Store four destination pixels |
| jae .LAlignedLoop |
| addl $8, %ecx // Adjust pixel count |
| |
| // Cleanup - handle pending pixels from loop |
| .LLoopCleanup1: |
| ptest %xmm7, %xmm1 // Check if all alphas are zero or opaque |
| ja .LAlphaNotOpaqueOrZero12 |
| jz .LAlphaZero13 |
| movdqa %xmm1, (%edx, %edi) // Store four destination pixels |
| .LAlphaZero13: |
| addl $16, %edi |
| subl $4, %ecx |
| js .LSmallRemaining // Reuse code from small loop |
| |
| .LRemain1: |
| movdqa (%eax, %edi), %xmm1 // Load four source pixels |
| ptest %xmm7, %xmm1 // Check if all alphas are zero or opaque |
| ja .LAlphaNotOpaqueOrZero12 |
| jz .LAlphaZero14 |
| movdqa %xmm1, (%edx, %edi) // Store four destination pixels |
| .LAlphaZero14: |
| addl $16, %edi |
| subl $4, %ecx |
| jmp .LSmallRemaining // Reuse code from small loop |
| |
| .LAlphaNotOpaqueOrZero12: |
| movdqa (%edx, %edi), %xmm5 // Load four destination pixels |
| EXTRACT_ALPHA(xmm1, xmm2) // Extract and clone alpha value |
| SCALE_PIXELS // Scale pixels using alpha |
| |
| addl $16, %edi |
| subl $4, %ecx |
| pblendvb %xmm5, %xmm3 // Combine results (mask in %xmm0, implicitly) |
| paddb %xmm3, %xmm1 // Add source and destination pixels together |
| movdqa %xmm1, -16(%edx, %edi) // Store four destination pixels |
| js .LSmallRemaining // Reuse code from small loop |
| jmp .LRemain1 |
| |
| .cfi_endproc |
| #ifndef __clang__ |
| .size S32A_Opaque_BlitRow32_SSE4_asm, .-S32A_Opaque_BlitRow32_SSE4_asm |
| #endif |
| #endif |
