include/effects/SkGradientShader.h - skia - Git at Google

 /*
  * Copyright 2006 The Android Open Source Project
  *
  * Use of this source code is governed by a BSD-style license that can be
  * found in the LICENSE file.
  */

 #ifndef SkGradientShader_DEFINED
 #define SkGradientShader_DEFINED

 #include "include/core/SkShader.h"

 /** \class SkGradientShader

     SkGradientShader hosts factories for creating subclasses of SkShader that
     render linear and radial gradients. In general, degenerate cases should not
     produce surprising results, but there are several types of degeneracies:

      * A linear gradient made from the same two points.
      * A radial gradient with a radius of zero.
      * A sweep gradient where the start and end angle are the same.
      * A two point conical gradient where the two centers and the two radii are
        the same.

     For any degenerate gradient with a decal tile mode, it will draw empty since the interpolating
     region is zero area and the outer region is discarded by the decal mode.

     For any degenerate gradient with a repeat or mirror tile mode, it will draw a solid color that
     is the average gradient color, since infinitely many repetitions of the gradients will fill the
     shape.

     For a clamped gradient, every type is well-defined at the limit except for linear gradients. The
     radial gradient with zero radius becomes the last color. The sweep gradient draws the sector
     from 0 to the provided angle with the first color, with a hardstop switching to the last color.
     When the provided angle is 0, this is just the solid last color again. Similarly, the two point
     conical gradient becomes a circle filled with the first color, sized to the provided radius,
     with a hardstop switching to the last color. When the two radii are both zero, this is just the
     solid last color.

     As a linear gradient approaches the degenerate case, its shader will approach the appearance of
     two half planes, each filled by the first and last colors of the gradient. The planes will be
     oriented perpendicular to the vector between the two defining points of the gradient. However,
     once they become the same point, Skia cannot reconstruct what that expected orientation is. To
     provide a stable and predictable color in this case, Skia just uses the last color as a solid
     fill to be similar to many of the other degenerate gradients' behaviors in clamp mode.
 */
 class SK_API SkGradientShader {
 public:
     enum Flags {
         /** By default gradients will interpolate their colors in unpremul space
          *  and then premultiply each of the results. By setting this flag, the
          *  gradients will premultiply their colors first, and then interpolate
          *  between them.
          *  example: https://fiddle.skia.org/c/@GradientShader_MakeLinear
          */
         kInterpolateColorsInPremul_Flag = 1 << 0,
     };

     /** Returns a shader that generates a linear gradient between the two specified points.
         <p />
         @param  pts     The start and end points for the gradient.
         @param  colors  The array[count] of colors, to be distributed between the two points
         @param  pos     May be NULL. array[count] of SkScalars, or NULL, of the relative position of
                         each corresponding color in the colors array. If this is NULL,
                         the the colors are distributed evenly between the start and end point.
                         If this is not null, the values must begin with 0, end with 1.0, and
                         intermediate values must be strictly increasing.
         @param  count   Must be >=2. The number of colors (and pos if not NULL) entries.
         @param  mode    The tiling mode

         example: https://fiddle.skia.org/c/@GradientShader_MakeLinear
     */
     static sk_sp<SkShader> MakeLinear(const SkPoint pts[2],
                                       const SkColor colors[], const SkScalar pos[], int count,
                                       SkTileMode mode,
                                       uint32_t flags, const SkMatrix* localMatrix);
     static sk_sp<SkShader> MakeLinear(const SkPoint pts[2],
                                       const SkColor colors[], const SkScalar pos[], int count,
                                       SkTileMode mode) {
         return MakeLinear(pts, colors, pos, count, mode, 0, nullptr);
     }

     /** Returns a shader that generates a linear gradient between the two specified points.
         <p />
         @param  pts     The start and end points for the gradient.
         @param  colors  The array[count] of colors, to be distributed between the two points
         @param  pos     May be NULL. array[count] of SkScalars, or NULL, of the relative position of
                         each corresponding color in the colors array. If this is NULL,
                         the the colors are distributed evenly between the start and end point.
                         If this is not null, the values must begin with 0, end with 1.0, and
                         intermediate values must be strictly increasing.
         @param  count   Must be >=2. The number of colors (and pos if not NULL) entries.
         @param  mode    The tiling mode

         example: https://fiddle.skia.org/c/@GradientShader_MakeLinear
     */
     static sk_sp<SkShader> MakeLinear(const SkPoint pts[2],
                                       const SkColor4f colors[], sk_sp<SkColorSpace> colorSpace,
                                       const SkScalar pos[], int count, SkTileMode mode,
                                       uint32_t flags, const SkMatrix* localMatrix);
     static sk_sp<SkShader> MakeLinear(const SkPoint pts[2],
                                       const SkColor4f colors[], sk_sp<SkColorSpace> colorSpace,
                                       const SkScalar pos[], int count, SkTileMode mode) {
         return MakeLinear(pts, colors, std::move(colorSpace), pos, count, mode, 0, nullptr);
     }

     /** Returns a shader that generates a radial gradient given the center and radius.
         <p />
         @param  center  The center of the circle for this gradient
         @param  radius  Must be positive. The radius of the circle for this gradient
         @param  colors  The array[count] of colors, to be distributed between the center and edge of the circle
         @param  pos     May be NULL. The array[count] of SkScalars, or NULL, of the relative position of
                         each corresponding color in the colors array. If this is NULL,
                         the the colors are distributed evenly between the center and edge of the circle.
                         If this is not null, the values must begin with 0, end with 1.0, and
                         intermediate values must be strictly increasing.
         @param  count   Must be >= 2. The number of colors (and pos if not NULL) entries
         @param  mode    The tiling mode
     */
     static sk_sp<SkShader> MakeRadial(const SkPoint& center, SkScalar radius,
                                       const SkColor colors[], const SkScalar pos[], int count,
                                       SkTileMode mode,
                                       uint32_t flags, const SkMatrix* localMatrix);
     static sk_sp<SkShader> MakeRadial(const SkPoint& center, SkScalar radius,
                                       const SkColor colors[], const SkScalar pos[], int count,
                                       SkTileMode mode) {
         return MakeRadial(center, radius, colors, pos, count, mode, 0, nullptr);
     }

     /** Returns a shader that generates a radial gradient given the center and radius.
         <p />
         @param  center  The center of the circle for this gradient
         @param  radius  Must be positive. The radius of the circle for this gradient
         @param  colors  The array[count] of colors, to be distributed between the center and edge of the circle
         @param  pos     May be NULL. The array[count] of SkScalars, or NULL, of the relative position of
                         each corresponding color in the colors array. If this is NULL,
                         the the colors are distributed evenly between the center and edge of the circle.
                         If this is not null, the values must begin with 0, end with 1.0, and
                         intermediate values must be strictly increasing.
         @param  count   Must be >= 2. The number of colors (and pos if not NULL) entries
         @param  mode    The tiling mode
     */
     static sk_sp<SkShader> MakeRadial(const SkPoint& center, SkScalar radius,
                                       const SkColor4f colors[], sk_sp<SkColorSpace> colorSpace,
                                       const SkScalar pos[], int count, SkTileMode mode,
                                       uint32_t flags, const SkMatrix* localMatrix);
     static sk_sp<SkShader> MakeRadial(const SkPoint& center, SkScalar radius,
                                       const SkColor4f colors[], sk_sp<SkColorSpace> colorSpace,
                                       const SkScalar pos[], int count, SkTileMode mode) {
         return MakeRadial(center, radius, colors, std::move(colorSpace), pos, count, mode,
                           0, nullptr);
     }

     /**
      *  Returns a shader that generates a conical gradient given two circles, or
      *  returns NULL if the inputs are invalid. The gradient interprets the
      *  two circles according to the following HTML spec.
      *  http://dev.w3.org/html5/2dcontext/#dom-context-2d-createradialgradient
      */
     static sk_sp<SkShader> MakeTwoPointConical(const SkPoint& start, SkScalar startRadius,
                                                const SkPoint& end, SkScalar endRadius,
                                                const SkColor colors[], const SkScalar pos[],
                                                int count, SkTileMode mode,
                                                uint32_t flags, const SkMatrix* localMatrix);
     static sk_sp<SkShader> MakeTwoPointConical(const SkPoint& start, SkScalar startRadius,
                                                const SkPoint& end, SkScalar endRadius,
                                                const SkColor colors[], const SkScalar pos[],
                                                int count, SkTileMode mode) {
         return MakeTwoPointConical(start, startRadius, end, endRadius, colors, pos, count, mode,
                                    0, nullptr);
     }

     /**
      *  Returns a shader that generates a conical gradient given two circles, or
      *  returns NULL if the inputs are invalid. The gradient interprets the
      *  two circles according to the following HTML spec.
      *  http://dev.w3.org/html5/2dcontext/#dom-context-2d-createradialgradient
      */
     static sk_sp<SkShader> MakeTwoPointConical(const SkPoint& start, SkScalar startRadius,
                                                const SkPoint& end, SkScalar endRadius,
                                                const SkColor4f colors[],
                                                sk_sp<SkColorSpace> colorSpace, const SkScalar pos[],
                                                int count, SkTileMode mode,
                                                uint32_t flags, const SkMatrix* localMatrix);
     static sk_sp<SkShader> MakeTwoPointConical(const SkPoint& start, SkScalar startRadius,
                                                const SkPoint& end, SkScalar endRadius,
                                                const SkColor4f colors[],
                                                sk_sp<SkColorSpace> colorSpace, const SkScalar pos[],
                                                int count, SkTileMode mode) {
         return MakeTwoPointConical(start, startRadius, end, endRadius, colors,
                                    std::move(colorSpace), pos, count, mode, 0, nullptr);
     }

     /** Returns a shader that generates a sweep gradient given a center.
         <p />
         @param  cx         The X coordinate of the center of the sweep
         @param  cx         The Y coordinate of the center of the sweep
         @param  colors     The array[count] of colors, to be distributed around the center, within
                            the gradient angle range.
         @param  pos        May be NULL. The array[count] of SkScalars, or NULL, of the relative
                            position of each corresponding color in the colors array. If this is
                            NULL, then the colors are distributed evenly within the angular range.
                            If this is not null, the values must begin with 0, end with 1.0, and
                            intermediate values must be strictly increasing.
         @param  count      Must be >= 2. The number of colors (and pos if not NULL) entries
         @param  mode       Tiling mode: controls drawing outside of the gradient angular range.
         @param  startAngle Start of the angular range, corresponding to pos == 0.
         @param  endAngle   End of the angular range, corresponding to pos == 1.
     */
     static sk_sp<SkShader> MakeSweep(SkScalar cx, SkScalar cy,
                                      const SkColor colors[], const SkScalar pos[], int count,
                                      SkTileMode mode,
                                      SkScalar startAngle, SkScalar endAngle,
                                      uint32_t flags, const SkMatrix* localMatrix);
     static sk_sp<SkShader> MakeSweep(SkScalar cx, SkScalar cy,
                                      const SkColor colors[], const SkScalar pos[], int count,
                                      uint32_t flags, const SkMatrix* localMatrix) {
         return MakeSweep(cx, cy, colors, pos, count, SkTileMode::kClamp, 0, 360, flags,
                          localMatrix);
     }
     static sk_sp<SkShader> MakeSweep(SkScalar cx, SkScalar cy,
                                      const SkColor colors[], const SkScalar pos[], int count) {
         return MakeSweep(cx, cy, colors, pos, count, 0, nullptr);
     }

     /** Returns a shader that generates a sweep gradient given a center.
         <p />
         @param  cx         The X coordinate of the center of the sweep
         @param  cx         The Y coordinate of the center of the sweep
         @param  colors     The array[count] of colors, to be distributed around the center, within
                            the gradient angle range.
         @param  pos        May be NULL. The array[count] of SkScalars, or NULL, of the relative
                            position of each corresponding color in the colors array. If this is
                            NULL, then the colors are distributed evenly within the angular range.
                            If this is not null, the values must begin with 0, end with 1.0, and
                            intermediate values must be strictly increasing.
         @param  count      Must be >= 2. The number of colors (and pos if not NULL) entries
         @param  mode       Tiling mode: controls drawing outside of the gradient angular range.
         @param  startAngle Start of the angular range, corresponding to pos == 0.
         @param  endAngle   End of the angular range, corresponding to pos == 1.
     */
     static sk_sp<SkShader> MakeSweep(SkScalar cx, SkScalar cy,
                                      const SkColor4f colors[], sk_sp<SkColorSpace> colorSpace,
                                      const SkScalar pos[], int count,
                                      SkTileMode mode,
                                      SkScalar startAngle, SkScalar endAngle,
                                      uint32_t flags, const SkMatrix* localMatrix);
     static sk_sp<SkShader> MakeSweep(SkScalar cx, SkScalar cy,
                                      const SkColor4f colors[], sk_sp<SkColorSpace> colorSpace,
                                      const SkScalar pos[], int count,
                                      uint32_t flags, const SkMatrix* localMatrix) {
         return MakeSweep(cx, cy, colors, std::move(colorSpace), pos, count,
                          SkTileMode::kClamp, 0, 360, flags, localMatrix);
     }
     static sk_sp<SkShader> MakeSweep(SkScalar cx, SkScalar cy,
                                      const SkColor4f colors[], sk_sp<SkColorSpace> colorSpace,
                                      const SkScalar pos[], int count) {
         return MakeSweep(cx, cy, colors, std::move(colorSpace), pos, count, 0, nullptr);
     }

     static void RegisterFlattenables();
 };

 #endif
	/*
	* Copyright 2006 The Android Open Source Project
	*
	* Use of this source code is governed by a BSD-style license that can be
	* found in the LICENSE file.
	*/

	#ifndef SkGradientShader_DEFINED
	#define SkGradientShader_DEFINED

	#include "include/core/SkShader.h"

	/** \class SkGradientShader

	SkGradientShader hosts factories for creating subclasses of SkShader that
	render linear and radial gradients. In general, degenerate cases should not
	produce surprising results, but there are several types of degeneracies:

	* A linear gradient made from the same two points.
	* A radial gradient with a radius of zero.
	* A sweep gradient where the start and end angle are the same.
	* A two point conical gradient where the two centers and the two radii are
	the same.

	For any degenerate gradient with a decal tile mode, it will draw empty since the interpolating
	region is zero area and the outer region is discarded by the decal mode.

	For any degenerate gradient with a repeat or mirror tile mode, it will draw a solid color that
	is the average gradient color, since infinitely many repetitions of the gradients will fill the
	shape.

	For a clamped gradient, every type is well-defined at the limit except for linear gradients. The
	radial gradient with zero radius becomes the last color. The sweep gradient draws the sector
	from 0 to the provided angle with the first color, with a hardstop switching to the last color.
	When the provided angle is 0, this is just the solid last color again. Similarly, the two point
	conical gradient becomes a circle filled with the first color, sized to the provided radius,
	with a hardstop switching to the last color. When the two radii are both zero, this is just the
	solid last color.

	As a linear gradient approaches the degenerate case, its shader will approach the appearance of
	two half planes, each filled by the first and last colors of the gradient. The planes will be
	oriented perpendicular to the vector between the two defining points of the gradient. However,
	once they become the same point, Skia cannot reconstruct what that expected orientation is. To
	provide a stable and predictable color in this case, Skia just uses the last color as a solid
	fill to be similar to many of the other degenerate gradients' behaviors in clamp mode.
	*/
	class SK_API SkGradientShader {
	public:
	enum Flags {
	/** By default gradients will interpolate their colors in unpremul space
	* and then premultiply each of the results. By setting this flag, the
	* gradients will premultiply their colors first, and then interpolate
	* between them.
	* example: https://fiddle.skia.org/c/@GradientShader_MakeLinear
	*/
	kInterpolateColorsInPremul_Flag = 1 << 0,
	};

	/** Returns a shader that generates a linear gradient between the two specified points.
	<p />
	@param pts The start and end points for the gradient.
	@param colors The array[count] of colors, to be distributed between the two points
	@param pos May be NULL. array[count] of SkScalars, or NULL, of the relative position of
	each corresponding color in the colors array. If this is NULL,
	the the colors are distributed evenly between the start and end point.
	If this is not null, the values must begin with 0, end with 1.0, and
	intermediate values must be strictly increasing.
	@param count Must be >=2. The number of colors (and pos if not NULL) entries.
	@param mode The tiling mode

	example: https://fiddle.skia.org/c/@GradientShader_MakeLinear
	*/
	static sk_sp<SkShader> MakeLinear(const SkPoint pts[2],
	const SkColor colors[], const SkScalar pos[], int count,
	SkTileMode mode,
	uint32_t flags, const SkMatrix* localMatrix);
	static sk_sp<SkShader> MakeLinear(const SkPoint pts[2],
	const SkColor colors[], const SkScalar pos[], int count,
	SkTileMode mode) {
	return MakeLinear(pts, colors, pos, count, mode, 0, nullptr);
	}

	/** Returns a shader that generates a linear gradient between the two specified points.
	<p />
	@param pts The start and end points for the gradient.
	@param colors The array[count] of colors, to be distributed between the two points
	@param pos May be NULL. array[count] of SkScalars, or NULL, of the relative position of
	each corresponding color in the colors array. If this is NULL,
	the the colors are distributed evenly between the start and end point.
	If this is not null, the values must begin with 0, end with 1.0, and
	intermediate values must be strictly increasing.
	@param count Must be >=2. The number of colors (and pos if not NULL) entries.
	@param mode The tiling mode

	example: https://fiddle.skia.org/c/@GradientShader_MakeLinear
	*/
	static sk_sp<SkShader> MakeLinear(const SkPoint pts[2],
	const SkColor4f colors[], sk_sp<SkColorSpace> colorSpace,
	const SkScalar pos[], int count, SkTileMode mode,
	uint32_t flags, const SkMatrix* localMatrix);
	static sk_sp<SkShader> MakeLinear(const SkPoint pts[2],
	const SkColor4f colors[], sk_sp<SkColorSpace> colorSpace,
	const SkScalar pos[], int count, SkTileMode mode) {
	return MakeLinear(pts, colors, std::move(colorSpace), pos, count, mode, 0, nullptr);
	}

	/** Returns a shader that generates a radial gradient given the center and radius.
	<p />
	@param center The center of the circle for this gradient
	@param radius Must be positive. The radius of the circle for this gradient
	@param colors The array[count] of colors, to be distributed between the center and edge of the circle
	@param pos May be NULL. The array[count] of SkScalars, or NULL, of the relative position of
	each corresponding color in the colors array. If this is NULL,
	the the colors are distributed evenly between the center and edge of the circle.
	If this is not null, the values must begin with 0, end with 1.0, and
	intermediate values must be strictly increasing.
	@param count Must be >= 2. The number of colors (and pos if not NULL) entries
	@param mode The tiling mode
	*/
	static sk_sp<SkShader> MakeRadial(const SkPoint& center, SkScalar radius,
	const SkColor colors[], const SkScalar pos[], int count,
	SkTileMode mode,
	uint32_t flags, const SkMatrix* localMatrix);
	static sk_sp<SkShader> MakeRadial(const SkPoint& center, SkScalar radius,
	const SkColor colors[], const SkScalar pos[], int count,
	SkTileMode mode) {
	return MakeRadial(center, radius, colors, pos, count, mode, 0, nullptr);
	}

	/** Returns a shader that generates a radial gradient given the center and radius.
	<p />
	@param center The center of the circle for this gradient
	@param radius Must be positive. The radius of the circle for this gradient
	@param colors The array[count] of colors, to be distributed between the center and edge of the circle
	@param pos May be NULL. The array[count] of SkScalars, or NULL, of the relative position of
	each corresponding color in the colors array. If this is NULL,
	the the colors are distributed evenly between the center and edge of the circle.
	If this is not null, the values must begin with 0, end with 1.0, and
	intermediate values must be strictly increasing.
	@param count Must be >= 2. The number of colors (and pos if not NULL) entries
	@param mode The tiling mode
	*/
	static sk_sp<SkShader> MakeRadial(const SkPoint& center, SkScalar radius,
	const SkColor4f colors[], sk_sp<SkColorSpace> colorSpace,
	const SkScalar pos[], int count, SkTileMode mode,
	uint32_t flags, const SkMatrix* localMatrix);
	static sk_sp<SkShader> MakeRadial(const SkPoint& center, SkScalar radius,
	const SkColor4f colors[], sk_sp<SkColorSpace> colorSpace,
	const SkScalar pos[], int count, SkTileMode mode) {
	return MakeRadial(center, radius, colors, std::move(colorSpace), pos, count, mode,
	0, nullptr);
	}

	/**
	* Returns a shader that generates a conical gradient given two circles, or
	* returns NULL if the inputs are invalid. The gradient interprets the
	* two circles according to the following HTML spec.
	* http://dev.w3.org/html5/2dcontext/#dom-context-2d-createradialgradient
	*/
	static sk_sp<SkShader> MakeTwoPointConical(const SkPoint& start, SkScalar startRadius,
	const SkPoint& end, SkScalar endRadius,
	const SkColor colors[], const SkScalar pos[],
	int count, SkTileMode mode,
	uint32_t flags, const SkMatrix* localMatrix);
	static sk_sp<SkShader> MakeTwoPointConical(const SkPoint& start, SkScalar startRadius,
	const SkPoint& end, SkScalar endRadius,
	const SkColor colors[], const SkScalar pos[],
	int count, SkTileMode mode) {
	return MakeTwoPointConical(start, startRadius, end, endRadius, colors, pos, count, mode,
	0, nullptr);
	}

	/**
	* Returns a shader that generates a conical gradient given two circles, or
	* returns NULL if the inputs are invalid. The gradient interprets the
	* two circles according to the following HTML spec.
	* http://dev.w3.org/html5/2dcontext/#dom-context-2d-createradialgradient
	*/
	static sk_sp<SkShader> MakeTwoPointConical(const SkPoint& start, SkScalar startRadius,
	const SkPoint& end, SkScalar endRadius,
	const SkColor4f colors[],
	sk_sp<SkColorSpace> colorSpace, const SkScalar pos[],
	int count, SkTileMode mode,
	uint32_t flags, const SkMatrix* localMatrix);
	static sk_sp<SkShader> MakeTwoPointConical(const SkPoint& start, SkScalar startRadius,
	const SkPoint& end, SkScalar endRadius,
	const SkColor4f colors[],
	sk_sp<SkColorSpace> colorSpace, const SkScalar pos[],
	int count, SkTileMode mode) {
	return MakeTwoPointConical(start, startRadius, end, endRadius, colors,
	std::move(colorSpace), pos, count, mode, 0, nullptr);
	}

	/** Returns a shader that generates a sweep gradient given a center.
	<p />
	@param cx The X coordinate of the center of the sweep
	@param cx The Y coordinate of the center of the sweep
	@param colors The array[count] of colors, to be distributed around the center, within
	the gradient angle range.
	@param pos May be NULL. The array[count] of SkScalars, or NULL, of the relative
	position of each corresponding color in the colors array. If this is
	NULL, then the colors are distributed evenly within the angular range.
	If this is not null, the values must begin with 0, end with 1.0, and
	intermediate values must be strictly increasing.
	@param count Must be >= 2. The number of colors (and pos if not NULL) entries
	@param mode Tiling mode: controls drawing outside of the gradient angular range.
	@param startAngle Start of the angular range, corresponding to pos == 0.
	@param endAngle End of the angular range, corresponding to pos == 1.
	*/
	static sk_sp<SkShader> MakeSweep(SkScalar cx, SkScalar cy,
	const SkColor colors[], const SkScalar pos[], int count,
	SkTileMode mode,
	SkScalar startAngle, SkScalar endAngle,
	uint32_t flags, const SkMatrix* localMatrix);
	static sk_sp<SkShader> MakeSweep(SkScalar cx, SkScalar cy,
	const SkColor colors[], const SkScalar pos[], int count,
	uint32_t flags, const SkMatrix* localMatrix) {
	return MakeSweep(cx, cy, colors, pos, count, SkTileMode::kClamp, 0, 360, flags,
	localMatrix);
	}
	static sk_sp<SkShader> MakeSweep(SkScalar cx, SkScalar cy,
	const SkColor colors[], const SkScalar pos[], int count) {
	return MakeSweep(cx, cy, colors, pos, count, 0, nullptr);
	}

	/** Returns a shader that generates a sweep gradient given a center.
	<p />
	@param cx The X coordinate of the center of the sweep
	@param cx The Y coordinate of the center of the sweep
	@param colors The array[count] of colors, to be distributed around the center, within
	the gradient angle range.
	@param pos May be NULL. The array[count] of SkScalars, or NULL, of the relative
	position of each corresponding color in the colors array. If this is
	NULL, then the colors are distributed evenly within the angular range.
	If this is not null, the values must begin with 0, end with 1.0, and
	intermediate values must be strictly increasing.
	@param count Must be >= 2. The number of colors (and pos if not NULL) entries
	@param mode Tiling mode: controls drawing outside of the gradient angular range.
	@param startAngle Start of the angular range, corresponding to pos == 0.
	@param endAngle End of the angular range, corresponding to pos == 1.
	*/
	static sk_sp<SkShader> MakeSweep(SkScalar cx, SkScalar cy,
	const SkColor4f colors[], sk_sp<SkColorSpace> colorSpace,
	const SkScalar pos[], int count,
	SkTileMode mode,
	SkScalar startAngle, SkScalar endAngle,
	uint32_t flags, const SkMatrix* localMatrix);
	static sk_sp<SkShader> MakeSweep(SkScalar cx, SkScalar cy,
	const SkColor4f colors[], sk_sp<SkColorSpace> colorSpace,
	const SkScalar pos[], int count,
	uint32_t flags, const SkMatrix* localMatrix) {
	return MakeSweep(cx, cy, colors, std::move(colorSpace), pos, count,
	SkTileMode::kClamp, 0, 360, flags, localMatrix);
	}
	static sk_sp<SkShader> MakeSweep(SkScalar cx, SkScalar cy,
	const SkColor4f colors[], sk_sp<SkColorSpace> colorSpace,
	const SkScalar pos[], int count) {
	return MakeSweep(cx, cy, colors, std::move(colorSpace), pos, count, 0, nullptr);
	}

	static void RegisterFlattenables();
	};

	#endif