| /* |
| * Copyright 2016 Google Inc. |
| * |
| * Use of this source code is governed by a BSD-style license that can be |
| * found in the LICENSE file. |
| */ |
| |
| #include "src/gpu/ganesh/vk/GrVkUniformHandler.h" |
| |
| #include "src/gpu/ganesh/GrTexture.h" |
| #include "src/gpu/ganesh/GrUtil.h" |
| #include "src/gpu/ganesh/glsl/GrGLSLProgramBuilder.h" |
| #include "src/gpu/ganesh/vk/GrVkGpu.h" |
| #include "src/gpu/ganesh/vk/GrVkPipelineStateBuilder.h" |
| #include "src/gpu/ganesh/vk/GrVkTexture.h" |
| |
| // To determine whether a current offset is aligned, we can just 'and' the lowest bits with the |
| // alignment mask. A value of 0 means aligned, any other value is how many bytes past alignment we |
| // are. This works since all alignments are powers of 2. The mask is always (alignment - 1). |
| // This alignment mask will give correct alignments for using the std430 block layout. If you want |
| // the std140 alignment, you can use this, but then make sure if you have an array type it is |
| // aligned to 16 bytes (i.e. has mask of 0xF). |
| // These are designated in the Vulkan spec, section 14.5.4 "Offset and Stride Assignment". |
| // https://www.khronos.org/registry/vulkan/specs/1.0-wsi_extensions/html/vkspec.html#interfaces-resources-layout |
| static uint32_t sksltype_to_alignment_mask(SkSLType type) { |
| switch(type) { |
| case SkSLType::kShort: // fall through |
| case SkSLType::kUShort: |
| return 0x1; |
| case SkSLType::kShort2: // fall through |
| case SkSLType::kUShort2: |
| return 0x3; |
| case SkSLType::kShort3: // fall through |
| case SkSLType::kShort4: |
| case SkSLType::kUShort3: |
| case SkSLType::kUShort4: |
| return 0x7; |
| case SkSLType::kInt: |
| case SkSLType::kUInt: |
| return 0x3; |
| case SkSLType::kInt2: |
| case SkSLType::kUInt2: |
| return 0x7; |
| case SkSLType::kInt3: |
| case SkSLType::kUInt3: |
| case SkSLType::kInt4: |
| case SkSLType::kUInt4: |
| return 0xF; |
| case SkSLType::kHalf: // fall through |
| case SkSLType::kFloat: |
| return 0x3; |
| case SkSLType::kHalf2: // fall through |
| case SkSLType::kFloat2: |
| return 0x7; |
| case SkSLType::kHalf3: // fall through |
| case SkSLType::kFloat3: |
| return 0xF; |
| case SkSLType::kHalf4: // fall through |
| case SkSLType::kFloat4: |
| return 0xF; |
| case SkSLType::kHalf2x2: // fall through |
| case SkSLType::kFloat2x2: |
| return 0x7; |
| case SkSLType::kHalf3x3: // fall through |
| case SkSLType::kFloat3x3: |
| return 0xF; |
| case SkSLType::kHalf4x4: // fall through |
| case SkSLType::kFloat4x4: |
| return 0xF; |
| |
| // This query is only valid for certain types. |
| case SkSLType::kVoid: |
| case SkSLType::kBool: |
| case SkSLType::kBool2: |
| case SkSLType::kBool3: |
| case SkSLType::kBool4: |
| case SkSLType::kTexture2DSampler: |
| case SkSLType::kTextureExternalSampler: |
| case SkSLType::kTexture2DRectSampler: |
| case SkSLType::kSampler: |
| case SkSLType::kTexture2D: |
| case SkSLType::kInput: |
| break; |
| } |
| SK_ABORT("Unexpected type"); |
| } |
| |
| /** Returns the size in bytes taken up in vulkanbuffers for SkSLTypes. */ |
| static inline uint32_t sksltype_to_vk_size(SkSLType type, int layout) { |
| switch(type) { |
| case SkSLType::kShort: |
| return sizeof(int16_t); |
| case SkSLType::kShort2: |
| return 2 * sizeof(int16_t); |
| case SkSLType::kShort3: |
| return 3 * sizeof(int16_t); |
| case SkSLType::kShort4: |
| return 4 * sizeof(int16_t); |
| case SkSLType::kUShort: |
| return sizeof(uint16_t); |
| case SkSLType::kUShort2: |
| return 2 * sizeof(uint16_t); |
| case SkSLType::kUShort3: |
| return 3 * sizeof(uint16_t); |
| case SkSLType::kUShort4: |
| return 4 * sizeof(uint16_t); |
| case SkSLType::kHalf: // fall through |
| case SkSLType::kFloat: |
| return sizeof(float); |
| case SkSLType::kHalf2: // fall through |
| case SkSLType::kFloat2: |
| return 2 * sizeof(float); |
| case SkSLType::kHalf3: // fall through |
| case SkSLType::kFloat3: |
| return 3 * sizeof(float); |
| case SkSLType::kHalf4: // fall through |
| case SkSLType::kFloat4: |
| return 4 * sizeof(float); |
| case SkSLType::kInt: // fall through |
| case SkSLType::kUInt: |
| return sizeof(int32_t); |
| case SkSLType::kInt2: // fall through |
| case SkSLType::kUInt2: |
| return 2 * sizeof(int32_t); |
| case SkSLType::kInt3: // fall through |
| case SkSLType::kUInt3: |
| return 3 * sizeof(int32_t); |
| case SkSLType::kInt4: // fall through |
| case SkSLType::kUInt4: |
| return 4 * sizeof(int32_t); |
| case SkSLType::kHalf2x2: // fall through |
| case SkSLType::kFloat2x2: |
| if (layout == GrVkUniformHandler::kStd430Layout) { |
| return 4 * sizeof(float); |
| } else { |
| return 8 * sizeof(float); |
| } |
| case SkSLType::kHalf3x3: // fall through |
| case SkSLType::kFloat3x3: |
| return 12 * sizeof(float); |
| case SkSLType::kHalf4x4: // fall through |
| case SkSLType::kFloat4x4: |
| return 16 * sizeof(float); |
| |
| // This query is only valid for certain types. |
| case SkSLType::kVoid: |
| case SkSLType::kBool: |
| case SkSLType::kBool2: |
| case SkSLType::kBool3: |
| case SkSLType::kBool4: |
| case SkSLType::kTexture2DSampler: |
| case SkSLType::kTextureExternalSampler: |
| case SkSLType::kTexture2DRectSampler: |
| case SkSLType::kSampler: |
| case SkSLType::kTexture2D: |
| case SkSLType::kInput: |
| break; |
| } |
| SK_ABORT("Unexpected type"); |
| } |
| |
| // Given the current offset into the ubo data, calculate the offset for the uniform we're trying to |
| // add taking into consideration all alignment requirements. The uniformOffset is set to the offset |
| // for the new uniform, and currentOffset is updated to be the offset to the end of the new uniform. |
| static uint32_t get_aligned_offset(uint32_t* currentOffset, |
| SkSLType type, |
| int arrayCount, |
| int layout) { |
| uint32_t alignmentMask = sksltype_to_alignment_mask(type); |
| // For std140 layout we must make arrays align to 16 bytes. |
| // TODO(skia:13380): make sure 2x3 and 3x2 matrices are handled properly once SkSLType adds |
| // support for non-square matrices |
| if (layout == GrVkUniformHandler::kStd140Layout && |
| (arrayCount || type == SkSLType::kFloat2x2 || type == SkSLType::kHalf2x2)) { |
| alignmentMask = 0xF; |
| } |
| uint32_t offsetDiff = *currentOffset & alignmentMask; |
| if (offsetDiff != 0) { |
| offsetDiff = alignmentMask - offsetDiff + 1; |
| } |
| int32_t uniformOffset = *currentOffset + offsetDiff; |
| SkASSERT(sizeof(float) == 4); |
| if (arrayCount) { |
| // TODO: this shouldn't be necessary for std430 |
| uint32_t elementSize = std::max<uint32_t>(16, sksltype_to_vk_size(type, layout)); |
| SkASSERT(0 == (elementSize & 0xF)); |
| *currentOffset = uniformOffset + elementSize * arrayCount; |
| } else { |
| *currentOffset = uniformOffset + sksltype_to_vk_size(type, layout); |
| } |
| return uniformOffset; |
| } |
| |
| GrVkUniformHandler::~GrVkUniformHandler() { |
| for (VkUniformInfo& sampler : fSamplers.items()) { |
| if (sampler.fImmutableSampler) { |
| sampler.fImmutableSampler->unref(); |
| sampler.fImmutableSampler = nullptr; |
| } |
| } |
| } |
| |
| GrGLSLUniformHandler::UniformHandle GrVkUniformHandler::internalAddUniformArray( |
| const GrProcessor* owner, |
| uint32_t visibility, |
| SkSLType type, |
| const char* name, |
| bool mangleName, |
| int arrayCount, |
| const char** outName) { |
| SkASSERT(name && strlen(name)); |
| SkASSERT(SkSLTypeCanBeUniformValue(type)); |
| |
| // TODO this is a bit hacky, lets think of a better way. Basically we need to be able to use |
| // the uniform view matrix name in the GP, and the GP is immutable so it has to tell the PB |
| // exactly what name it wants to use for the uniform view matrix. If we prefix anythings, then |
| // the names will mismatch. I think the correct solution is to have all GPs which need the |
| // uniform view matrix, they should upload the view matrix in their setData along with regular |
| // uniforms. |
| char prefix = 'u'; |
| if ('u' == name[0] || !strncmp(name, GR_NO_MANGLE_PREFIX, strlen(GR_NO_MANGLE_PREFIX))) { |
| prefix = '\0'; |
| } |
| SkString resolvedName = fProgramBuilder->nameVariable(prefix, name, mangleName); |
| |
| VkUniformInfo tempInfo; |
| tempInfo.fVariable = GrShaderVar{std::move(resolvedName), |
| type, |
| GrShaderVar::TypeModifier::None, |
| arrayCount}; |
| |
| tempInfo.fVisibility = visibility; |
| tempInfo.fOwner = owner; |
| tempInfo.fRawName = SkString(name); |
| |
| for (int layout = 0; layout < kLayoutCount; ++layout) { |
| tempInfo.fOffsets[layout] = get_aligned_offset(&fCurrentOffsets[layout], |
| type, |
| arrayCount, |
| layout); |
| } |
| |
| fUniforms.push_back(tempInfo); |
| |
| if (outName) { |
| *outName = fUniforms.back().fVariable.c_str(); |
| } |
| |
| return GrGLSLUniformHandler::UniformHandle(fUniforms.count() - 1); |
| } |
| |
| GrGLSLUniformHandler::SamplerHandle GrVkUniformHandler::addSampler( |
| const GrBackendFormat& backendFormat, GrSamplerState state, const skgpu::Swizzle& swizzle, |
| const char* name, const GrShaderCaps* shaderCaps) { |
| SkASSERT(name && strlen(name)); |
| |
| const char prefix = 'u'; |
| SkString mangleName = fProgramBuilder->nameVariable(prefix, name, /*mangle=*/true); |
| |
| SkString layoutQualifier; |
| layoutQualifier.appendf("set=%d, binding=%d", kSamplerDescSet, fSamplers.count()); |
| |
| VkUniformInfo tempInfo; |
| tempInfo.fVariable = |
| GrShaderVar{std::move(mangleName), |
| SkSLCombinedSamplerTypeForTextureType(backendFormat.textureType()), |
| GrShaderVar::TypeModifier::Uniform, |
| GrShaderVar::kNonArray, |
| std::move(layoutQualifier), |
| SkString()}; |
| |
| tempInfo.fVisibility = kFragment_GrShaderFlag; |
| tempInfo.fOwner = nullptr; |
| tempInfo.fRawName = SkString(name); |
| tempInfo.fOffsets[0] = 0; |
| tempInfo.fOffsets[1] = 0; |
| |
| fSamplers.push_back(tempInfo); |
| |
| // Check if we are dealing with an external texture and store the needed information if so. |
| auto ycbcrInfo = backendFormat.getVkYcbcrConversionInfo(); |
| if (ycbcrInfo && ycbcrInfo->isValid()) { |
| GrVkGpu* gpu = static_cast<GrVkPipelineStateBuilder*>(fProgramBuilder)->gpu(); |
| GrVkSampler* sampler = gpu->resourceProvider().findOrCreateCompatibleSampler(state, |
| *ycbcrInfo); |
| fSamplers.back().fImmutableSampler = sampler; |
| if (!sampler) { |
| return {}; |
| } |
| } |
| |
| fSamplerSwizzles.push_back(swizzle); |
| SkASSERT(fSamplerSwizzles.size() == fSamplers.count()); |
| return GrGLSLUniformHandler::SamplerHandle(fSamplers.count() - 1); |
| } |
| |
| GrGLSLUniformHandler::SamplerHandle GrVkUniformHandler::addInputSampler( |
| const skgpu::Swizzle& swizzle, const char* name) { |
| SkASSERT(name && strlen(name)); |
| SkASSERT(fInputUniform.fVariable.getType() == SkSLType::kVoid); |
| |
| const char prefix = 'u'; |
| SkString mangleName = fProgramBuilder->nameVariable(prefix, name, /*mangle=*/true); |
| |
| SkString layoutQualifier; |
| layoutQualifier.appendf("input_attachment_index=%d, set=%d, binding=%d", |
| kDstInputAttachmentIndex, kInputDescSet, kInputBinding); |
| |
| fInputUniform = { |
| GrShaderVar{std::move(mangleName), SkSLType::kInput, GrShaderVar::TypeModifier::Uniform, |
| GrShaderVar::kNonArray, std::move(layoutQualifier), SkString()}, |
| kFragment_GrShaderFlag, nullptr, SkString(name)}; |
| fInputSwizzle = swizzle; |
| return GrGLSLUniformHandler::SamplerHandle(0); |
| } |
| |
| void GrVkUniformHandler::appendUniformDecls(GrShaderFlags visibility, SkString* out) const { |
| for (const VkUniformInfo& sampler : fSamplers.items()) { |
| SkASSERT(sampler.fVariable.getType() == SkSLType::kTexture2DSampler || |
| sampler.fVariable.getType() == SkSLType::kTextureExternalSampler); |
| if (visibility == sampler.fVisibility) { |
| sampler.fVariable.appendDecl(fProgramBuilder->shaderCaps(), out); |
| out->append(";\n"); |
| } |
| } |
| if (fInputUniform.fVariable.getType() == SkSLType::kInput) { |
| if (visibility == fInputUniform.fVisibility) { |
| SkASSERT(visibility == kFragment_GrShaderFlag); |
| fInputUniform.fVariable.appendDecl(fProgramBuilder->shaderCaps(), out); |
| out->append(";\n"); |
| } |
| } |
| |
| #ifdef SK_DEBUG |
| bool firstOffsetCheck = false; |
| for (const VkUniformInfo& localUniform : fUniforms.items()) { |
| if (!firstOffsetCheck) { |
| // Check to make sure we are starting our offset at 0 so the offset qualifier we |
| // set on each variable in the uniform block is valid. |
| SkASSERT(0 == localUniform.fOffsets[kStd140Layout] && |
| 0 == localUniform.fOffsets[kStd430Layout]); |
| firstOffsetCheck = true; |
| } |
| } |
| #endif |
| |
| // At this point we determine whether we'll be using push constants based on the |
| // uniforms set so far. Later checks will use the internal bool we set here to |
| // keep things consistent. |
| this->determineIfUsePushConstants(); |
| SkString uniformsString; |
| for (const VkUniformInfo& localUniform : fUniforms.items()) { |
| if (visibility & localUniform.fVisibility) { |
| if (SkSLTypeCanBeUniformValue(localUniform.fVariable.getType())) { |
| Layout layout = fUsePushConstants ? kStd430Layout : kStd140Layout; |
| uniformsString.appendf("layout(offset=%d) ", localUniform.fOffsets[layout]); |
| localUniform.fVariable.appendDecl(fProgramBuilder->shaderCaps(), &uniformsString); |
| uniformsString.append(";\n"); |
| } |
| } |
| } |
| |
| if (!uniformsString.isEmpty()) { |
| if (fUsePushConstants) { |
| out->append("layout (push_constant) "); |
| } else { |
| out->appendf("layout (set=%d, binding=%d) ", |
| kUniformBufferDescSet, kUniformBinding); |
| } |
| out->append("uniform uniformBuffer\n{\n"); |
| out->appendf("%s\n};\n", uniformsString.c_str()); |
| } |
| } |
| |
| uint32_t GrVkUniformHandler::getRTFlipOffset() const { |
| Layout layout = fUsePushConstants ? kStd430Layout : kStd140Layout; |
| uint32_t currentOffset = fCurrentOffsets[layout]; |
| return get_aligned_offset(¤tOffset, SkSLType::kFloat2, 0, layout); |
| } |
| |
| void GrVkUniformHandler::determineIfUsePushConstants() const { |
| // We may insert a uniform for flipping origin-sensitive language features (e.g. sk_FragCoord). |
| // We won't know that for sure until then but we need to make this determination now, |
| // so assume we will need it. |
| static constexpr uint32_t kPad = 2*sizeof(float); |
| fUsePushConstants = |
| fCurrentOffsets[kStd430Layout] > 0 && |
| fCurrentOffsets[kStd430Layout] + kPad <= fProgramBuilder->caps()->maxPushConstantsSize(); |
| } |