blob: fdda2944e8682ca69e16080e68d7a3eba3c0caa6 [file] [log] [blame]
/*
* Copyright 2016 Google Inc.
*
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*/
#include "src/pdf/SkPDFMakeCIDGlyphWidthsArray.h"
#include "include/core/SkPaint.h"
#include "include/private/SkTo.h"
#include "src/core/SkScalerCache.h"
#include "src/core/SkStrikeSpec.h"
#include "src/pdf/SkPDFGlyphUse.h"
#include <algorithm>
#include <vector>
// TODO(halcanary): Write unit tests for SkPDFMakeCIDGlyphWidthsArray().
// TODO(halcanary): The logic in this file originated in several
// disparate places. I feel sure that someone could simplify this
// down to a single easy-to-read function.
namespace {
// scale from em-units to base-1000, returning as a SkScalar
SkScalar from_font_units(SkScalar scaled, uint16_t emSize) {
if (emSize == 1000) {
return scaled;
} else {
return scaled * 1000 / emSize;
}
}
SkScalar scale_from_font_units(int16_t val, uint16_t emSize) {
return from_font_units(SkIntToScalar(val), emSize);
}
// Unfortunately poppler does not appear to respect the default width setting.
#if defined(SK_PDF_CAN_USE_DW)
int16_t findMode(SkSpan<const int16_t> advances) {
if (advances.empty()) {
return 0;
}
int16_t previousAdvance = advances[0];
int16_t currentModeAdvance = advances[0];
size_t currentCount = 1;
size_t currentModeCount = 1;
for (size_t i = 1; i < advances.size(); ++i) {
if (advances[i] == previousAdvance) {
++currentCount;
} else {
if (currentCount > currentModeCount) {
currentModeAdvance = previousAdvance;
currentModeCount = currentCount;
}
previousAdvance = advances[i];
currentCount = 1;
}
}
return currentCount > currentModeCount ? previousAdvance : currentModeAdvance;
}
#endif
} // namespace
/** Retrieve advance data for glyphs. Used by the PDF backend. */
// TODO(halcanary): this function is complex enough to need its logic
// tested with unit tests.
std::unique_ptr<SkPDFArray> SkPDFMakeCIDGlyphWidthsArray(const SkTypeface& typeface,
const SkPDFGlyphUse& subset,
SkScalar* defaultAdvance) {
// There are two ways of expressing advances
//
// range: " gfid [adv.ances adv.ances ... adv.ances]"
// run: " gfid gfid adv.ances"
//
// Assuming that on average
// the ASCII representation of an advance plus a space is 10 characters
// the ASCII representation of a glyph id plus a space is 4 characters
// the ASCII representation of unused gid plus a space in a range is 2 characters
//
// When not in a range or run
// a. Skipping don't cares or defaults is a win (trivial)
// b. Run wins for 2+ repeats " gid gid adv.ances"
// " gid [adv.ances adv.ances]"
// rule: 2+ repeats create run as long as possible, else start range
//
// When in a range
// Cost of stopping and starting a range is 8 characters "] gid ["
// c. Skipping defaults is always a win " adv.ances"
// rule: end range if default seen
// d. Skipping 4+ don't cares is a win " 0 0 0 0"
// rule: end range if 4+ don't cares
// Cost of stop and start range plus run is 28 characters "] gid gid adv.ances gid ["
// e. Switching for 2+ repeats and 4+ don't cares wins " 0 0 adv.ances 0 0 adv.ances"
// rule: end range for 2+ repeats with 4+ don't cares
// f. Switching for 3+ repeats wins " adv.ances adv.ances adv.ances"
// rule: end range for 3+ repeats
int emSize;
SkStrikeSpec strikeSpec = SkStrikeSpec::MakePDFVector(typeface, &emSize);
SkBulkGlyphMetricsAndPaths paths{strikeSpec};
auto result = SkPDFMakeArray();
std::vector<SkGlyphID> glyphIDs;
subset.getSetValues([&](unsigned index) {
glyphIDs.push_back(SkToU16(index));
});
auto glyphs = paths.glyphs(SkMakeSpan(glyphIDs));
#if defined(SK_PDF_CAN_USE_DW)
std::vector<int16_t> advances;
advances.reserve(glyphs.size());
for (const SkGlyph* glyph : glyphs) {
advances.push_back((int16_t)glyph->advanceX());
}
std::sort(advances.begin(), advances.end());
int16_t modeAdvance = findMode(SkMakeSpan(advances));
*defaultAdvance = scale_from_font_units(modeAdvance, emSize);
#else
*defaultAdvance = 0;
#endif
for (size_t i = 0; i < glyphs.size(); ++i) {
int16_t advance = (int16_t)glyphs[i]->advanceX();
#if defined(SK_PDF_CAN_USE_DW)
// a. Skipping don't cares or defaults is a win (trivial)
if (advance == modeAdvance) {
continue;
}
#endif
// b. 2+ repeats create run as long as possible, else start range
{
size_t j = i + 1; // j is always one past the last known repeat
for (; j < glyphs.size(); ++j) {
int16_t next_advance = (int16_t)glyphs[j]->advanceX();
if (advance != next_advance) {
break;
}
}
if (j - i >= 2) {
result->appendInt(glyphs[i]->getGlyphID());
result->appendInt(glyphs[j - 1]->getGlyphID());
result->appendScalar(scale_from_font_units(advance, emSize));
i = j - 1;
continue;
}
}
{
result->appendInt(glyphs[i]->getGlyphID());
auto advanceArray = SkPDFMakeArray();
advanceArray->appendScalar(scale_from_font_units(advance, emSize));
size_t j = i + 1; // j is always one past the last output
for (; j < glyphs.size(); ++j) {
advance = (int16_t)glyphs[j]->advanceX();
#if defined(SK_PDF_CAN_USE_DW)
// c. end range if default seen
if (advance == modeAdvance) {
break;
}
#endif
int dontCares = glyphs[j]->getGlyphID() - glyphs[j - 1]->getGlyphID() - 1;
// d. end range if 4+ don't cares
if (dontCares >= 4) {
break;
}
int16_t next_advance = 0;
// e. end range for 2+ repeats with 4+ don't cares
if (j + 1 < glyphs.size()) {
next_advance = (int16_t)glyphs[j+1]->advanceX();
int next_dontCares = glyphs[j+1]->getGlyphID() - glyphs[j]->getGlyphID() - 1;
if (advance == next_advance && dontCares + next_dontCares >= 4) {
break;
}
}
// f. end range for 3+ repeats
if (j + 2 < glyphs.size() && advance == next_advance) {
next_advance = (int16_t)glyphs[j+2]->advanceX();
if (advance == next_advance) {
break;
}
}
while (dontCares --> 0) {
advanceArray->appendScalar(0);
}
advanceArray->appendScalar(scale_from_font_units(advance, emSize));
}
result->appendObject(std::move(advanceArray));
i = j - 1;
}
}
return result;
}