Skia Graphics Release Notes

This file includes a list of high level updates for each milestone release.

Milestone 122

  • graphite::BackendTexture can be created from a WGPUTextureView. This comes with a perfomance cost when reading pixels to or writing pixels from the CPU. An intermediate WGPUTexture is created to support these operations. However, this enables creating SkSurface or SkImage from wgpu::SwapChain::GetCurrentTextureView.

  • SkSL now properly reports an error if the body of a for-loop declares a variable which shadows the for-loop induction variable.

    In other words, SkSL code like this will now generate an error:

        for (int x = 0; x < 10; ++x) {
            int x = 123;  // error: symbol 'x' was already defined
        }
    

    Previously, the declaration of x would be allowed, in violation of the GLSL scoping rules (6.3): “For both for and while loops, the sub-statement does not introduce a new scope for variable names.”

  • The PDF code now directly depends on Skia's JPEG decoder and encoder. The build time shims to avoid using a JPEG decoder and encoder have been removed. In the future these may be made optional again by allowing the user to supply them at runtime.

  • SkSL variables declared inside of a switch statement will now properly fall out of scope after the closing brace of the switch-block, as one would expect.

    In other words, SkSL code like this will now generate an error:

        switch (n) {
            case 1:
                int x = 123;
        }
        return x; // error: unknown identifier 'x'
    

    Previously, x would remain accessible after the switch's closing brace.

  • skgpu::graphite::ContextOptions::fNeverYieldToWebGPU is removed. Instead, yielding in an Emscripten build is controlled by installing a client-provided function on skgpu::graphite::DawnBackendContext. The client may install a function that uses Asyncify to yield to the main thread loop. If no function is installed then the Context has the same restrictions as with the old option.

    In native builds the default is to use wgpu::Device::Tick to detect GPU progress. To simulate the non-yielding behavior of Context in native DawnBackendContext::fTick may be explicitly set to to nullptr.

    By externalizing the use of Asyncify it is possible to build Skia without generated JS code that relies on Asyncify.

  • SkSL will now properly report an error if a function contains a top-level variable with the same name as a function parameter. SkSL intends to match the scoping rules of GLSL, in particular: “A function’s parameter declarations and body together form a single scope nested in the global scope.”

    A program like this will now be rejected:

        void func(int var) {
            int var;
        }
    
        error: 2: symbol 'var' was already defined
            int var;
            ^^^^^^^
    
  • SkFont::getTypeface() will no longer return a nullptr to indicate “the default typeface”. If left unspecified, SkFonts will use an empty typeface (e.g. no glyphs).

  • SkFontMgr::RefDefault() has been deleted. Clients should instantiate and manage their own SkFontMgrs and use them to explicitly create SkTypefaces

  • GrGLMakeNativeInterface has been deprecated and will eventually be removed. Clients should be calling the precise factory (e.g. GrGLInterfaces::makeGLX) they need. Some APIs that currently allow a nullptr GrGLInterface will be stop allowing this (e.g. GrDirectContexts::MakeGL).

  • SkFontArguments::Palette::Override's index member is changing from an int type to uint16_t to make the size exact and remove an unneeded signedness. This avoids platform/compiler-specific size ambiguiity and more closely matches the OpenType CPAL table.


Milestone 121

  • SkFontConfigInterface::makeTypeface now has a required sk_sp<SkFontMgr> parameter to be used for parsing the font data from the stream.

  • skgpu::graphite::ContextOptions has a new field, fNeverYieldToWebGPU. This new option is only valid with the Dawn backend. It indicates that skgpu::graphite::Context should never yield to Dawn. In native this means wgpu::Device::Tick() is never called. In Emscripten it means Context never yields to the main thread event loop.

    When the option is enabled, skgpu::SyncToCpu::kYes is ignored when passed to Context::submit(). Moreover, it is a fatal error to have submitted but unfinished GPU work before deleting Context. A new method, hasUnfinishedGpuWork() is added to Context that can be used to test this condition.

    The intent of this option is to be able to use Graphite in WASM without requiring Asyncify.

  • Deprecated GrMipmapped and GrMipMapped alias have been removed in favor of skgpu::Mipmapped.

  • Harfbuzz-backed SkShaper instances will no longer treat a null SkFontMgr as meaning “use the default SkFontMgr for fallback” and instead will not do fallback for glyphs missing from a font.

  • GrBackendSemaphore::initVk and GrBackendSemaphore::vkSemaphore have been replaced with GrBackendSemaphores::MakeVk and GrBackendSemaphores::GetVkSemaphore, defined in include/gpu/ganesh/vk/GrVkBackendSemaphore.h

  • The Vulkan-specific methods and constructor of MutableTextureState have been deprecated in favor of those found in include/gpu/vk/VulkanMutableTextureState.h.


Milestone 120

  • SkBase64.h has been removed from the public API.

  • SkFont::refTypefaceOrDefault and SkFont::getTypefaceOrDefault() have been removed from the public API.

  • GrBackendSemaphore::initGL and GrBackendSemaphore::glSync have been removed from the public API.

  • For Graphite, SkImages::AdoptTextureFrom has been renamed to SkImages::WrapTexture to better reflect what is happening to the passed in texture.

  • GrSurfaceInfo.h has been removed from the public API.

  • SkMesh now allows shaders, color filters, and blenders to be used in the mesh-fragment program. Pass in effects using the children parameter of SkMesh::Make or SkMesh::MakeIndexed. For a working example, see gm/mesh.cpp.

  • The behavior for SkPicture deserialization (via SkReadBuffer) to fallback to SkImages::DeferredFromEncodedData when SkDeserialImageProc is not set or returns null is deprecated and will be removed shortly.

    SkDeserialImageFromDataProc has been added to SkDeserialProcs to allow clients to safely avoid a copy when decoding image data in SkPictures.

    SkDeserialImageProc now takes in an optional AlphaType which can be used to override the AlphaType that an image was serialized with, if desired.

  • skgpu::graphite::RecorderOptions::kDefaultRecorderBudget is now a static data member.

  • SkTypeface::MakeFromName, SkTypeface::MakeFromFile, SkTypeface::MakeFromStream, and SkTypeface::MakeFromData are deprecated and will be removed eventually. These should be replaced with calls directly to the SkFontMgr that can provide the appropriate typefaces.

    SkTypeface::MakeDefault() has been deprecated. Soon it will return an empty typeface and eventually be removed.

    SkTypeface::UniqueID() has been removed - clients should use the method instead of this static function.

  • GrDirectContext::MakeVulkan... has been moved to GrDirectContexts::MakeVulkan... which are defined in include/gpu/ganesh/vk/GrVkDirectContext.h

  • The various GPU wait calls on GrDirectContext, SkSurface, and GrVkSecondaryCBContext which take a client supplied semaphore, now only guarantee to block the gpu transfer and fragment stages instead of all gpu commands. This shouldn't affect any client since client provided gpu resources (e.g. textures) are only ever used by Skia in the fragment stages.


Milestone 119

  • Added new SkImageFilters::Crop(SkRect, SkTileMode, sk_sp<SkImageFilter>) image filter effect that crops the output from the wrapped SkImageFilter and optionally applies the SkTileMode when sampling outside of the crop rect.

  • GrDirectContext::MakeGL... has been moved to GrDirectContexts::MakeGL... which are defined in include/gpu/ganesh/gl/GrGLDirectContext.h

  • GrDirectContext::submit and GrDirectContext::flushAndSubmit calls now take a GrSyncCpu enum instead of a error-prone boolean.

    Similarly, calls to GrDirectContext::performDeferredCleanup and GrDirectContext::purgeUnlockedResources take a GrPurgeResourceOptions enum.

  • SkMeshSpecification no longer rejects fragment programs which include uniform shader, uniform colorFilter or uniform blender. However, SkMesh::Make will not allow the mesh specification to be used.

  • SkMesh::Make and SkMesh::MakeIndexed now require a span of child effects as a new parameter. This functionality is still a work in progress; for now, always pass an empty span.

  • sksl-minify can now minify SkMesh programs. Pass --meshvert or --meshfrag to indicate that the input program is an SkMesh vertex or fragment program. When minifying a mesh program, you must supply struct Varyings and struct Attributes which correspond to the SkMeshSpecification; these will be eliminated from the minified output.

  • SkMergePathEffect, SkMatrixPathEffect, SkStrokePathEffect, and SkStrokeAndFillPathEffect have been removed from the public API. These effects can be implemented on the SkPath objects directly using other means and clients will likely find performance boosts by doing so.

  • SkShadowFlags are now visible in include/utils/SkShadowUtils.h

  • SkPictures no longer serialize SkImages to PNG encoded data by default. Clients who wish to preserve this should make use of SkSerialProcs, specifically the fImageProc field.


Milestone 118

  • GrDirectContext::flush variants now expect a SkSurface pointer only, not an sk_sp.

  • SkImage::makeWithFilter has been deprecated. It has been replaced with three factory functions:

    Ganesh: SkImages::MakeWithFilter(GrRecordingContext*, ...); -- declared in SkImageGanesh.h

    Graphite: SkImages::MakeWithFilter(skgpu::graphite::Recorder*, ...); -- declared in Image.h

    Raster: SkImages::MakeWithFilter(...); -- declared in SkImage.h

    The new factories require the associated backend context object be valid. For example, the Graphite version will return nullptr if it isn't supplied with a Recorder object.

  • SkSL and Runtime Effects are no longer optional features of Skia; they are always available. The GN flag skia_enable_sksl has been removed.

  • SkSL will now properly reject sequence-expressions containing arrays, or sequence-expressions containing structures of arrays. Previously, the left-side expression of a sequence was checked, but the right-side was not. In GLSL ES 1.0, and therefore in SkSL, the only operator which is allowed to operate on arrays is the array subscript operator ([]).

  • The Dawn backend for Ganesh has been removed. Dawn will continue to be supported in the Graphite backend.

  • We plan to remove SkTime.h from the public API. As of now, SkAutoTime has been deleted as it was unused.

  • Vulkan-specific calls are being removed from GrBackendSurface.h. Clients should use the equivalents found in include/gpu/ganesh/vk/GrVkBackendSurface.h"


Milestone 117

  • SkGraphics::AllowJIT() has been removed. It was previously deprecated (and did nothing).

  • New methods are added to SkImage, SkSurface, and skgpu::graphite::context named asyncRescaleAndReadPixeksYUVA420. These function identically to the existing asyncRescaleAndReadPixelsYUV420 methods but return a fourth plane containing alpha at full resolution.

  • SkAutoGraphics was removed. This was a helper struct that simply called SkGraphics::Init. Any instance of SkAutoGraphics can be replaced with a call to SkGraphics::Init.

  • SkCanvas::flush() has been removed. It can be replaced with:

        if (auto dContext = GrAsDirectContext(canvas->recordingContext())) {
            dContext->flushAndSubmit();
        }
    

    SkCanvas::recordingContext() and SkCanvas::recorder() are now const. They were implicitly const but are now declared to be such.

  • SkCanvas::recordingContext() and SkCanvas::recorder() are now const. They were implicitly const but are now declared to be such.

  • SkMesh::MakeIndexBuffer, SkMesh::CopyIndexBuffer, SkMesh::MakeVertexBuffer, and SkMesh::CopyVertexBuffer have been moved to the SkMeshes namespace. Ganesh-specific versions have been created in include/gpu/ganesh/SkMeshGanesh.h.

  • SkPath now enforces an upper limit of 715 million path verbs.

  • SkRuntimeEffectBuilder::uniforms(), SkRuntimeEffectBuilder::children(), SkRuntimeShaderBuilder::makeShader(), SkRuntimeColorFilterBuilder::makeColorFilter(), and SkRuntimeBlendBuilder::makeBlender() are now marked as const. No functional changes internally, just making explicit what had been implicit.

  • SkRuntimeEffect::makeImage and SkRuntimeShaderBuilder::makeImage have been removed.

  • GL-specific calls have been removed from GrBackendSurface.h. Clients should use the equivalents found in include/gpu/ganesh/gl/GrGLBackendSurface.h

  • A new SkTiledImageUtils namespace (in SkTiledImageUtils.h) provides DrawImage and DrawImageRect methods that directly mirror SkCanvas' drawImage and drawImageRect calls.

    The new entry points will breakup large SkBitmap-backed SkImages into tiles and draw them if they would be too large to upload to the gpu as one texture.

    They will fall through to their SkCanvas correlates if tiling isn't needed or possible.


Milestone 116

  • SkPromiseImageTexture has been removed from the public API, as well as SkImages::PromiseTextureFrom and SkImages::PromiseTextureFromYUVA, public consumers of that data type.

  • SkDeferredDisplayList, SkDeferredDisplayListRecorder, and SkSurfaceCharacterization have been removed from the public API.

  • The intermediate color computed by SkBlenders::Arithmetic is now always clamped to between 0 and 1 (inclusive), and then enforcePremul is applied when that parameter is true.

  • Added a new public type, SkColorTable, to own the lookup tables passed into SkColorFilters::Table, which allows clients and the returned SkColorFilter to share the table memory instead of having to duplicate it in any wrapper types that lazily create Skia representations.

  • The deprecated SkImageFilters::Magnifier factory that did not take a lens bounds parameter has been removed.

  • SkImageFilters::RuntimeShader has variations that take a maximum sample radius, which is used to provide padded input images to the runtime effect so that boundary conditions are avoided.

  • SkImageFilters::AlphaThreshold has been removed. Its only use was in ChromeOS and that usage has been replaced with a Blend(kSrcIn, input, Picture(region)) filter graph to achieve the same effect.

  • The single-argument SkImageFilters::Image(sk_sp<SkImage>) factory is removed. The SkSamplingOptions to use when rendering the image during filtering must be provided. SkFilterMode::kLinear is recommended over the previous bicubic default.

  • GrTextureGenerator now has a subclass GrExternalTextureGenerator which can be subclassed by clients and used with SkImages::DeferredFromTextureGenerator in order to create images from textures that were created outside of skia. GrTextureGenerator has been removed from the public API in favor of GrExternalTextureGenerator.

  • SkPoint now uses float for its coordinates. This starts the process of removing SkScalar from Skia. SkScalar was a typedef for float, so this has no practical impact on code that uses Skia.

  • SkSamplingOptions(SkFilterMode) and SkSamplingOptions(SkCubicResampler) are no longer marked explicit so that samplings can be created inline more succinctly.

  • SkShaders is now a namespace (was previously a non-constructable class with only static functions). SkPerlinNoiseShader::MakeFractalNoise and SkPerlinNoiseShader::MakeTurbulence have been moved to the SkShaders namespace and SkPerlinNoiseShader (the public non-constructable class) has been slated for moving into private internals of Skia. There are no functional differences in the moved functions, however the change of some #includes in include/core/SkShader.h, include/effects/SkGradientShader.h, and include/effects/SkPerlinNoiseShader.h may cause clients who were depending on the transitive dependencies to now fail to compile.

  • The following methods have been removed from SkSurface and relocated to other methods/functions:

    • SkSurface::asImage -> SkSurfaces::AsImage (include/gpu/graphite/Surface.h)
    • SkSurface::flushAndSubmit -> GrDirectContext::flushAndSubmit
    • SkSurface::flush -> GrDirectContext::flush
    • SkSurface::makeImageCopy -> SkSurfaces::AsImageCopy (include/gpu/graphite/Surface.h)
    • SkSurface::resolveMSAA -> SkSurfaces::ResolveMSAA() (include/gpu/ganesh/SkSurfaceGanesh.h)

    Additionally, SkSurface::BackendSurfaceAccess is now in the SkSurfaces namespace.

  • The deprecated SkTableColorFilter class and its methods have been removed. Clients should use SkColorFilters::Table and SkColorFilters::TableARGB (defined in include/core/SkColorFilter.h).

  • The SkYUVAPixmapInfo::SupportedDataTypes(const GrImageContext&) constructor has been removed from the public API.


Milestone 115

  • Clients now need to register codecs which Skia should use to decode raw bytes. For example: SkCodecs::Register(SkJpegDecoder::Decoder());. Skia still provides many supported formats (see include/codec/*Decoder.h). Clients are free to specify their own, either supplementing the existing set or using a custom version instead of the one previously provided by default by Skia. See SkCodecs::Decoder for the necessary data to provide when using a custom decoder (in include/codec/SkCodec.h).

    To ease the transition, Skia will continue (for a short while) to register codecs unless SK_DISABLE_LEGACY_INIT_DECODERS is defined.

  • SkDrawable::newPictureSnapshot is removed. Instead, call SkDrawable::makePictureSnapshot. The old method returned a bare (but ref-counted) pointer, which was easy for clients to get wrong. The new method returns an sk_sp<SkPicture>, which is easier to handle, and consistent with the rest of skia.

  • SkGraphics::PurgePinnedFontCache() has been added to allow clients to explicitly trigger SkStrikeCache purge checks for SkStrikes with pinners. Defining SK_STRIKE_CACHE_DOESNT_AUTO_CHECK_PINNERS in the user configuration now disables automatic purge checking of strikes with pinners.

  • The following SkImage factories have been moved to include/gpu/graphite/Image.h:

    • SkImage::MakeGraphiteFromBackendTexture -> SkImages::AdoptTextureFrom
    • SkImage::MakeGraphiteFromYUVABackendTextures -> SkImages::TextureFromYUVATextures
    • SkImage::MakeGraphiteFromYUVAPixmaps -> SkImages::TextureFromYUVAPixmaps
    • SkImage::MakeGraphitePromiseTexture -> SkImages::PromiseTextureFrom

    The SkImage method makeTextureImage has been moved to SkImages::TextureFromImage.

    SkImage::RequiredImageProperties has been renamed to SkImage::RequiredProperties, with fMipmapped turned into a boolean instead of the GPU enum.

  • SkImage::makeColorSpace and SkImage::makeColorTypeAndColorSpace now take a GrDirectContext as the first parameter. This should be supplied when dealing with texture-backed images and can be nullptr otherwise.

  • SkImage::subset now takes a GrDirectContext* as its first parameter (this can be nullptr for non-gpu backed images. Images which are backed by a codec or picture will not be turned into a GPU texture before being read. This should only impact picture-backed images, which may not be read correctly if the picture contain nested texture-backed images itself. To force a conversion to a texture, clients should call SkImages::TextureFromImage, passing in the image, and then call subset on the result. Documentation has been clarified that SkImage::subset will return a raster- backed image if the source is not backed by a texture, and texture-otherwise.

    SkImages::SubsetTextureFrom has been added to subset an image and explicitly return a texture- backed image. This allows some optimizations, especially for large images that exceed a maximum texture size of a GPU.

    SkImage::makeRasterImage and SkImage::makeNonTextureImage now take a GrDirectContext* which clients should supply for reading-back pixels from texture-backed images.

  • SkImageFilters::Image now returns a non-null image filter if the input sk_sp<SkImage> is null or the src rectangle is empty or does not overlap the image. The returned filter evaluates to transparent black, which is equivalent to a null or empty image. Previously, returning a null image filter would mean that the dynamic source image could be surprisingly injected into the filter evaluation where it might not have been intended.

  • SkImageFilters::Magnifier(srcRect, inset) is deprecated. These parameters do not provide enough information for the implementation to correctly respond to canvas transform or participate accurately in layer bounds planning.

    A new SkImageFilters::Magnifier function is added that takes additional parameters: the outer lens bounds and the actual zoom amount (instead of inconsistently reconstructing the target zoom amount, which was the prior behavior). Additionally, the new factory accepts an SkSamplingOptions to control the sampling quality.

  • SkImageFilters::Picture now returns a non-null image filter if the input sk_sp<SkPicture> is null. The returned filter evaluates to transparent black, which is equivalent to a null or empty picture. Previously, returning a null image filter would mean that the dynamic source image could be surprisingly injected into the filter evaluation where it might not have been intended.

  • SkImageFilters::Shader now returns a non-null image filter if the input sk_sp<SkShader> is null. The returned filter evaluates to transparent black, which is equivalent to a null or empty shader. Previously, returning a null image filter would mean that the dynamic source image could be surprisingly injected into the filter evaluation where it might not have been intended.

  • SkImageGenerator::MakeFromEncoded has been removed from the public API. SkImage::DeferredFromEncoded or SkCodec::MakeFromData should be used instead.

  • SkSurface::getBackendTexture and SkSurface::getBackendRenderTarget have been deprecated and replaced with SkSurfaces::GetBackendTexture and SkSurfaces::GetBackendRenderTarget respectively. These are found in include/gpu/ganesh/SkSurfaceGanesh.h. The supporting enum BackendHandleAccess has also been moved to SkSurfaces::BackendHandleAccess as an enum class, with shorter member names.

  • SkSurface factory methods have been moved to the SkSurfaces namespace. Many have been renamed to be more succinct or self-consistent. Factory methods specific to the Ganesh GPU backend are defined publicly in include/gpu/ganesh/SkSurfaceGanesh.h. The Metal Ganesh backend has some specific factories in include/gpu/ganesh/mtl/SkSurfaceMetal.h.

    • SkSurface::MakeFromAHardwareBuffer -> SkSurfaces::WrapAndroidHardwareBuffer
    • SkSurface::MakeFromBackendRenderTarget -> SkSurfaces::WrapBackendRenderTarget
    • SkSurface::MakeFromBackendTexture -> SkSurfaces::WrapBackendTexture
    • SkSurface::MakeFromCAMetalLayer -> SkSurfaces::WrapCAMetalLayer
    • SkSurface::MakeFromMTKView -> SkSurfaces::WrapMTKView
    • SkSurface::MakeGraphite -> SkSurfaces::RenderTarget
    • SkSurface::MakeGraphiteFromBackendTexture -> SkSurfaces::WrapBackendTexture
    • SkSurface::MakeNull -> SkSurfaces::Null
    • SkSurface::MakeRaster -> SkSurfaces::Raster
    • SkSurface::MakeRasterDirect -> SkSurfaces::WrapPixels
    • SkSurface::MakeRasterDirectReleaseProc -> SkSurfaces::WrapPixels
    • SkSurface::MakeRasterN32Premul -> SkSurfaces::Raster (clients should make SkImageInfo)
    • SkSurface::MakeRenderTarget -> SkSurfaces::RenderTarget

Milestone 114

  • The CPU backend for Runtime Effects has been rewritten. This may cause slight differences in performance and image quality when runtime effects are painted onto a raster surface.
  • Gradient shaders support interpolation in several different color spaces, by passing a SkGradientShader::Interpolation struct to the shader factory functions. The color space and hue method options are based on the CSS Color Level 4 specfication:
  • SkImages::GetBackendTextureFromImage has been renamed SkImages::MakeBackendTextureFromImage.
  • SkImage::getBackendTexture() has been moved to SkImages::GetBackendTextureFromImage() in SkImageGanesh.h.
  • SkImage::makeTextureImage() has been moved to SkImages::TextureFromImage() in SkImageGanesh.h.
  • SkImage::flush() and SkImage::flushAndSubmit() has been moved to GrDirectContext::flush() and GrDirectContext::flushAndSubmit() in SkImageGanesh.h.
  • SkSurfaceProperties::kAlwaysDither_Flag added to globally enable dithering for a specific SkSurface target.
  • SkSerialImageProc and SkDeserialImageProc are now also used to encode/decode the SkMipmap layers of certain SkImages.
  • The defines SK_USE_WIC_ENCODER and SK_USE_CG_ENCODER have been removed, as well as the code to use the Windows Image Codecs and Core Graphics as a way to have Skia encode files in PNG, JPEG, and WEBP format. Skia continues to support use of the NDK codecs on Android, as well as using external C++ libraries (e.g. libpng, libjpeg-turbo) to encode images. WIC and CG are still used to decode images on the appropriate platforms.
  • SkImage::encodeToData has been deprecated. Clients should use refEncodedData if the image was from an encoded bytestream or one of SkPngEncoder::Encode, SkJpegEncoder::Encode, SkWebpEncoder::Encode directly.
  • The following defines no longer do anything. GN clients should instead set the provided arguments (from gn/skia.gni) as necessary:
    • SK_ENCODE_PNG -> skia_use_libjpeg_turbo_encode
    • SK_ENCODE_JPEG -> skia_use_libpng_encode
    • SK_ENCODE_WEBP -> skia_use_libwebp_encode Other clients should make sure the appropriate *EncoderImpl.cpp files from src/encode are included in the build.
  • SkImageEncoder has been removed. Clients should use one of SkPngEncoder::Encode, SkJpegEncoder::Encode or SkWebpEncoder::Encode directly.
  • SkImageGenerator has a new subclass GrTextureGenerator which can be used if clients want to provide specialized ways of making Ganesh texture-backed Images.
  • SkImageGenerator::MakeFromPicture has been removed from the public API. Clients should be drawing the picture directly instead of turning it into an image first.

Milestone 113

  • The define SK_SUPPORT_GPU is now SK_GANESH. It is no longer detected as a 0 or 1, but as the absence or presence of that define. As a result, it defaults to off (not defined) if not defined (SK_SUPPORT_GPU would default to SK_SUPPORT_GPU=1 if not defined).
  • SkStrSplit is no longer part of the public API.
  • SkImage::encodeToData now takes a GrDirectContext. The versions which do not have that are deprecated and will be removed at some point.
  • SkMatrix::Scale, preScale, setScale, etc. with any scale factor of 0 correctly no longer return true from rectStaysRect(), consistent with rectStaysRect() implying a non-zero scale.
  • SkImage::CompressionType has been renamed to SkTextureCompressionType and moved to include/core/SkTextureCompressionType.h
  • SkEncodedImageFormat.h and SkPngChunkReader.h are now in include/codec
  • SkICC.h is now in include/encode
  • SkImage factory methods have been moved to the SkImages namespace. Many have been renamed to be more succinct or self-consistent. Factory methods specific to the Ganesh GPU backend are defined publicly in include/gpu/ganesh/SkImageGanesh.h.
    • SkImage::MakeBackendTextureFromSkImage -> SkImages::GetBackendTextureFromImage
    • SkImage::MakeCrossContextFromPixmap -> SkImages::CrossContextTextureFromPixmap
    • SkImage::MakeFromAdoptedTexture -> SkImages::AdoptTextureFrom
    • SkImage::MakeFromBitmap -> SkImages::RasterFromBitmap
    • SkImage::MakeFromCompressedTexture -> SkImages::TextureFromCompressedTexture
    • SkImage::MakeFromEncoded -> SkImages::DeferredFromEncodedData
    • SkImage::MakeFromGenerator -> SkImages::DeferredFromGenerator
    • SkImage::MakeFromPicture -> SkImages::DeferredFromPicture
    • SkImage::MakeFromRaster -> SkImages::RasterFromPixmap
    • SkImage::MakeFromTexture -> SkImages::BorrowTextureFrom
    • SkImage::MakeFromYUVAPixmaps -> SkImages::TextureFromYUVAPixmaps
    • SkImage::MakeFromYUVATextures -> SkImages::TextureFromYUVATextures
    • SkImage::MakePromiseTexture -> SkImages::PromiseTextureFrom
    • SkImage::MakePromiseYUVATexture -> SkImages::PromiseTextureFromYUVA
    • SkImage::MakeRasterCopy -> SkImages::RasterFromPixmapCopy
    • SkImage::MakeRasterData -> SkImages::RasterFromData
    • SkImage::MakeRasterFromCompressed -> SkImages::RasterFromCompressedTextureData
    • SkImage::MakeTextureFromCompressed -> SkImages::TextureFromCompressedTextureData To help in the transition, there is some temporary bridge code (e.g. aliases) which will eventually be removed.

Milestone 112

  • SkImage::CubicResampler has been removed. Clients should use SkCubicResampler from include/core/SkSamplingOptions.h instead (the former was an alias for the latter).
  • SkRuntimeColorFilterBuilder has been added. This is a helper class for setting up color filters, analogous to SkRuntimeShaderBuilder.
  • SkShaders::CoordClamp has been added. It clamps the coords passed used with another shader to a rectangle.
  • SkRandom is no longer part of the public API.
  • SK_ARRAY_COUNT is no longer part of the public API. Clients should use std::size.
  • SK_SCALAR_IS_FLOAT is not set anymore. SkScalar is always a float (and has been since 2017).
  • sk_realloc_throw (an internal API) now frees up memory when 0 is passed in as the size. This should have no user-facing impacts for clients which use the default allocator, but requires custom allocators to also implement this change.
  • The particles module has been deleted.
  • SkJpegEncoder::Options includes a parameter for XMP metadata.
  • SkJpegEncoder includes support for encoding SkYUVAPixmaps directly.

Milestone 111

  • SkToBool is no longer part of the public API.
  • A float version of SkCanvas::saveLayerAlpha now exists as SkCanvas::saveLayerAlphaf.
  • SkAbs32 and SkTAbs are no longer part of the public API.
  • SkAlign2, SkAlign4, SkAlign8, SkIsAlign2, SkIsAlign4, SkIsAlign8, SkAlignPtr, SkIsAlignPtr, and SkAlignTo are no longer part of the public API.
  • GrContextOptions::fSkipGLErrorChecks no longer stops checking shader compilation and program linking success.
  • SkBackingFit is no longer part of the public API.
  • SkBudgeted was moved from include/core/SkTypes.h to include/gpu/GpuTypes.h and moved into the skgpu namespace.
  • include/gpu/GrConfig.h has been removed; its contents were folded into other files.
  • SkLeftShift is no longer part of the public API.
  • SK_MaxS32 and related constants are no longer part of the public API.
  • include/core/SkMath.h is no longer part of the public API.

Milestone 110

  • SkParsePath::ToSVGString now returns the string, rather than modifying a passed-in string.
  • Removed previously deprecated SkImageFilters::Paint factory. Use SkImageFilters::Shader instead.
  • SkMesh::Make and SkMesh::MakeIndexed now return a SkMesh and error message string.
  • SkPaint::getFillPath has been replaced with skpathutils::FillPathWithPaint from include/core/SkPathUtils.h. The functionality should be the same.

Milestone 109

  • SkMesh vertex and fragment main() signatures have changed. See docs on SkMeshSpecification.
  • Added SkImage::RescaleMode::kLinear so that the async rescale/readback APIs can scale in a single step no matter the total scale factor (faster but lower quality than kRepeatedLinear).
  • SkMesh buffer factories added that make copies of CPU-backed buffers.
  • A utility for minifying Runtime Effect code has been added to Skia. Add the gn argument “skia_compile_modules = true” to your gn args, and a new utility called “sksl-minify” will be compiled as part of your Skia build. Run the command: skia-minify output-file.sksl input-file.sksl to write a minified version of the runtime shader “input-file.sksl” into a file named “output-file.sksl”. By default, sksl-minify expects a shader, but you can also pass command line options --colorfilter or --blender if your program is a color-filter or a blender. A compile error will be printed to stdout if an error is found in the program.
  • The order of SkShader local matrix concatenation has been reversed. See skbug.com/13749
  • PromiseImages have been added to Graphite. This supports both volatile and non-volatile Promise Images. See the comment for SkImage::MakeGraphitePromiseTexture for more details.
  • Graphite has loosened the immutability requirements of SkImages - through a new SkSurface API and careful synchronization, clients can now mutate the backend object backing an SkImage. The new API consists of SkSurface::asImage and SkSurface::makeImageCopy. We have a document that covers the expected use cases and the synchronization required for each one.

Milestone 108

  • SkShader::asAGradient() has been removed.
  • SkMesh and SkMeshSpecification has separate sk_sp and bare ptr getters for ref counted types.
  • Add support for specifying a custom ICC profile to SkJpegEncoder, SkPngEncoder, and SkWebpEncoder.

Milestone 107

  • Exported SkColor4f::toBytes_RGBA() and SkColor4f::FromBytes_RGBA.
  • SkWebpEncoder: Added support for animated WebP image encoding.
  • SkRuntimeEffect shader effects were inadvertently allowing functions with the signature half4 main(float2 coords, half4 color). This was disallowed at Milestone 87, but the restriction was inadvertently relaxed in later milestones. Going forward, we will only accept a shader signature of half4 main(float2 coords).

Milestone 106

  • sk_sp is marked with the [[clang::trivial_abi]] attribute where supported.
  • SkMesh API: Allows a user to draw a vertex mesh with custom attributes and varyings using SkSL. Mesh data (vertex and index) can be created on a GrDirectContext to avoid re-uploading data per draw. Currently does not work with SkPicture or any backend but GPU.
  • Added SkColorFilters::Blend(const SkColor4f&, sk_sp, SkBlendMode) to complement the existing SkColorFilters::Blend(SkColor, SkBlendMode) factory.
  • The experimental C API was removed.
  • Added support for AVIF decoding using libavif.

Milestone 104

  • New functions SkBitmap::getColor4f and SkPixmap::getColor4f return float colors.
  • SkRuntimeEffect takes and returns a const SkData.
  • SkRasterHandleAllocator::MakeCanvas now takes optional SkSurfaceProps.
  • SkImage::MakeFromPicture and SkImageGenerator::MakeFromPicture now take an optional SkSurfaceProps to use when rasterizing the picture.
  • SkRuntimeEffect::Uniform now stores the uniform name as a string_view, rather than a SkString. Related methods SkRuntimeEffect::findUniform and SkRuntimeEffectBuilder::uniform also take std::string_view instead of const char*.
  • SkRuntimeEffect::Child now stores the child name as a string_view, rather than a SkString. Related methods SkRuntimeEffect::findChild and SkRuntimeEffectBuilder::child also take std::string_view instead of const char*. Also, SkImageFilters::RuntimeShader now takes the child name(s) as std::string_view instead of const char*.
  • skcms.h has been relocated to //modules/skcms/skcms.h (was //include/third_party/skcms/skcms.h)
  • New functions SkCanvas::getBaseProps and SkCanvas::getTopProps; SkCanvas::getBaseProps is a direct replacement for the (now deprecated) SkCanvas::getProps function, while getTopProps is a variant that returns the SkSurfaceProps that are active in the current layer.
  • New function SkEventTracer::newTracingSection(const char* name) enables splitting traces up into different sections for a selection of backend tracing frameworks (Perfetto, SkDebugf).

Milestone 103

  • SkSamplingOptions now includes anisotropic filtering. Implemented on GPU only.
  • SkBitmap::clear and SkBitmap::clearColor take in SkColor4fs

Milestone 102

  • Add glGetFloatv and glSamplerParameterf to GrGLInterface.
  • GrGLCreateNativeInterface is removed. Use GrGLMakeNativeInterface.
  • GrContextOptions::fSharpenMipmappedTextures is removed. MIP LOD is now always biased on the GPU backend. The CPU backend implementation is modified to match this behavior.
  • Passing SkCanvas::kStrict_SrcRectConstraint disables mipmapping. The old behavior differed between GPU and CPU. CPU always computed a new set of mipmap based on the subset. GPU restricted the sampling coordinates to the subset in the base level but upper level pixels that map to pixels outside the subset in the base level were still used. To get the previous CPU behavior use SkImage::makeSubset() to make a subset image and draw that. The previous GPU behavior is similar, though not exactly, equivalent to making a mipmapped image shader from the original image and applying that to a rectangle.
  • Fully disable experimental support for HW tessellation shaders. GrContextOptions::fEnableExperimentalHardwareTessellation is ignored and behaves as if it is false. The optimized path renderer no longer requires hardware tessellation at all, and is automatically enabled when drawing to an SkSurface created with MSAA, or when GrContextOptions::fInternalMultisampleCount is set to a non-zero value.

Milestone 101

  • Add maxSurfaceSampleCountForColorType(SkColorType ct) in GrContextThreadSafeProxy
  • Enums SkAlphaType and SkColorType are broken out into their own header files in include/core/

Milestone 100

  • Skia now requires C++17 and the corresponding standard library (or newer).
  • Skia on iOS now requires iOS 11 to build; earlier versions of iOS do not support C++17.
  • The skstd::string_view and skstd::optional Skia classes have been replaced with the C++17 native std::string_view and std::optional.
  • Added SkSurface::resolveMSAA api to force Skia to resolve MSAA draws. Useful for when Skia wraps a client's texture as the resolve target.
  • All of the makeShader functions associated with SkRuntimeEffect no longer take an isOpaque parameter. These functions will now make a best effort to determine if your shader always produces opaque output, and optimize accordingly. If you definitely want your shader to produce opaque output, do so in the shader's SkSL code. This can be done by adjusting any return statement in your shader with a swizzle: return color.rgb1;. https://review.skia.org/506462
  • SkRSXform is now exported to DLL/.so files.

Milestone 99

  • Added two new intrinsic functions to SkSL for use in runtime effects: vec3 toLinearSrgb(vec3 color) vec3 fromLinearSrgb(vec3 color) These convert RGB color values between the working color space (the color space of the destination surface) and a known, fixed color space. toLinearSrgb converts a color to the sRGB color gamut, with a linear transfer function. fromLinearSrgb converts a color from that same color space. These are helpful for effects that need to work in a specific color space, or want to apply effects (like lighting) that work best in a linear color space. Note that if the destination surface has no color space (color space is nullptr), these intrinsics will do no conversion, and return the input color unchanged. https://review.skia.org/481416
  • Added a new variant of SkImageFilters::RuntimeShader that supports multiple child nodes. https://review.skia.org/489536
  • Add the ability to specify palette overrides in SkFontArguments. Implemented for the FreeType-backed SkFontMgrs.

Milestone 98

  • The following functions and methods are not defined in SkSurface when SK_SUPPORT_GPU is 0: MakeFromBackendTexture, MakeFromBackendRenderTarget, MakeRenderTarget, getBackendTexture, getBackendRenderTarget, replaceBackendTexture. flush() with parameters was removed as well. These were all no-ops anyway when just the CPU backend was compiled in (noting that flush() and flushAndSubmit() are still no-ops on the CPU backend).
  • GrBackendSemaphore only includes methods that match the GPU backend that Skia was compiled for. For example, initVulkan and vkSemaphore are not defined unless the Vulkan backend is compiled into Skia.
  • Surfaces and images are now limited to just under 2GB of total size. Previously, larger images could be created, but the CPU backend would fail to index them correctly.
  • SkCanvas::drawVertices and SkCanvas::drawPatch variants that did not take SkBlendMode are removed.
  • SkImageFilters::RuntimeShader is a new public API that enables adding RuntimeShaderEffects into image filter graph.
  • SkImage::makeRawShader is a new public API that creates “raw” image shaders. makeRawShader functions like SkImage::makeShader, but for images that contain non-color data. This includes images encoding things like normals, material properties (eg roughness), heightmaps, or any other purely mathematical data that happens to be stored in an image. These types of images are useful with some programmable shaders (ie SkRuntimeEffect). Raw image shaders work like regular image shaders (including filtering and tiling), with a few major differences:
    • No color space transformation is ever applied (the color space of the image is ignored).
    • Images with an alpha type of kUnpremul are not automatically premultiplied.
    • Bicubic filtering is not supported. If SkSamplingOptions::useCubic is true, these factories will return nullptr.
  • Removed SkCanvas::markCTM and SkCanvas::findMarkedCTM. These were created to be used with other features that have since been deleted, so they served no purpose.
  • Added limited JPEGXL support.

Milestone 97

  • Added basic support for vulkan DRM modifiers. All of these are treated as read only textures internally (versus querying specific modifier support). Clients can either pass a flag to Vulkan GrBackendFormat to say it uses modifiers or pass the VK_IMAGE_TILING_DRM_FORMAT_MODIFIER_EXT to a GrBackendTexture via the GrVkImageInfo struct.
  • The following functions and methods are not defined in SkImage when SK_SUPPORT_GPU is 0: MakeTextureFromCompressed, MakeFromTexture, MakeFromCompressedTexture, MakeCrossContextFromPixmap, MakeFromAdoptedTexture, MakeFromYUVATextures, MakeFromYUVAPixmaps, MakePromiseTexture, MakePromiseYUVATexture, MakeBackendTextureFromSkImage, flush, flushAndSubmit, getBackendTexture, makeTextureImage. These were all no-ops anyway when just the CPU backend was compiled in.

Milestone 96

  • SkRuntimeEffect no longer clamps the RGB values of an effect's output to the range 0..A. This makes it easier to use a hierarchy of SkSL shaders where intermediate values do not represent colors but are, for example, non-color inputs to a lighting model. http://review.skia.org/452558

Milestone 95

  • Minimum supported iOS raised from 8 to 11. Skia may build back to iOS 9 but versions older than 11 are not tested. Community contributions to support versions 9 and 10 of iOS may be considered, but they may not be complex as they cannot be tested.

Milestone 94

  • Metal backend has been changed to track command buffer resources manually rather than using retained resources. https://review.skia.org/432878

  • Added virtual onResetClip() to SkCanvas for Android Framework, to emulate the soon-to-be-removed expanding clip ops guarded by SK_SUPPORT_DEPRECATED_CLIPOPS. https://review.skia.org/430897

  • Removed SK_SUPPORT_DEPRECATED_CLIPOPS build flag. Clips can only be intersect and difference. https://review.skia.org/436565

  • There is a new syntax for invoking (sampling) child effects in SkSL. Previously, children (shaders, colorFilters, blenders) were invoked using different overloads of sample. That syntax is deprecated (but still supported). Now, the child behaves like an object, with a method name eval. The arguments to these eval methods are the same as the arguments in the old sample intrinsics. For example: // Old syntax: sample(shader, xy) sample(colorFilter, color) sample(blender, srcColor, dstColor) // New syntax: shader.eval(xy) colorFilter.eval(color) blender.eval(srcColor, dstColor) https://review.skia.org/444735


Milestone 93


Milestone 92

  • Hides SkPathEffect::computeFastBounds() from public API; external subclasses of SkPathEffect must implement onComputeFastBounds() but can return false to signal it's not computable. https://review.skia.org/406140

  • Add SkM44::RectToRect constructor (SkM44's equivalent to SkMatrix::RectToRect) https://review.skia.org/402957

  • Metal support has been removed for versions of iOS older than 10.0 and MacOS older than 10.14. https://review.skia.org/401816

  • Removed custom attributes from SkVertices and the corresponding varying feature from SkRuntimeEffect. https://review.skia.org/398222

  • Dropped support for mixed samples. Mixed samples is no longer relevant for Ganesh. DMSAA and the new Ganesh architecture both rely on full MSAA, and any platform where mixed samples is supported will ultimately not use the old architecture.

  • SkRuntimeEffect::Make has been removed. It is replaced by MakeForShader and MakeForColorFilter. These functions do stricter error checking on the SkSL, to ensure it is valid for a particular stage of the Skia pipeline. https://review.skia.org/402156


Milestone 91

  • The SkSL DSL API has been moved into public headers, although it is still under active development and isn't quite ready for prime time yet. https://review.skia.org/378496

  • Skia's GPU backend no longer supports NVPR. Our more recent path renderers are more performant and are not limited to nVidia hardware.

  • SkRuntimeEffect now supports uniforms of type int, int2, int3, and int4. Per the OpenGL ES Shading Language Version 1.00 specification, there are few guarantees about the representation or range of integral types, and operations that assume integral representation (eg, bitwise), are not supported. https://review.skia.org/391856

  • SkRuntimeEffect requires that ‘shader’ variables be declared as ‘uniform’. The deprecated syntax of ‘in shader’ is no longer supported. https://review.skia.org/393081


Milestone 90

  • Renamed use of sk_cf_obj in external Metal types to sk_cfp. https://review.skia.org/372556

  • GrDirectContext::ComputeImageSize() is removed. Use SkImage::textureSize() instead. https://review.skia.org/368621 https://review.skia.org/369317 https://review.skia.org/371958

  • Remove SkImageFilter::MakeMatrixFilter as it was unused and replaced with SkImageFilters::MatrixTransform. https://review.skia.org/366318

  • Refactored particle system to use a single code string containing both Effect and Particle code. Uniform APIs are now shared for all program entry points, and no longer prefixed with ‘Effect’ or ‘Particle’. For example, instead of SkParticleEffect::effectUniformInfo and SkParticleEffect::particleUniformInfo, there is just SkParticleEffect::uniformInfo.

  • Remove SkImageFilter::CropRect from the public API as it's no longer usable. All factories work with ‘SkRect’, ‘SkIRect’, or nullable pointers to ‘Sk[I]Rect’. https://review.skia.org/361496

  • Remove deprecated SkImageFilter factory functions and supporting types. All default-provided SkImageFilters are now only constructed via ‘include/effects/SkImageFilters.h’ https://review.skia.org/357285

  • Added SkRuntimeEffect::makeImage() to capture the output of an SkRuntimeEffect in an SkImage. https://review.skia.org/357284

  • Updated SkRuntimeEffect::Make() to take an Options struct. It also now returns a Results struct instead of a tuple. https://review.skia.org/363785 https://review.skia.org/367060

  • Changed SkRuntimeEffect::Varying to have lower-case member names, with no ‘f’ prefix. https://review.skia.org/365656

  • Changed SkRuntimeEffect::Uniform to have lower-case member names, with no ‘f’ prefix. https://review.skia.org/365696

  • Deprecate (and ignore) SkAndroidCodec::ExifOrientation https://review.skia.org/344763

  • Fix several minor issues in lighting image filters:

    • The spotlight falloff exponent is no longer clamped to [1, 128]. SVG 1.1 requires the specular lighting effect‘s exponent (shininess) to be clamped; not the spotlight’s falloff. Any such parameter clamping is the client‘s responsibility, which makes Skia’s lighting effect easily adaptable to SVG 1.1 (clamp exponent) or SVG 2 (no clamp).
    • Fix spotlight incorrectly scaling light within the cone angle.
    • Move saturation of RGBA to after multiplying lighting intensity with the lighting color, which improves rendering when diffuse and specular constants are greater than 1. https://review.skia.org/355496
  • SkDeferredDisplayListRecorder::makePromiseTexture has moved to SkImage::MakePromiseTexture. New code should use the new entry point – migration CLs will be coming soon. https://review.skia.org/373716


Milestone 89

  • Removed SkYUVAIndex and SkYUVASizeInfo. These were no longer used in any public APIs. https://review.skia.org/352497

  • Numerous changes to SkRuntimeEffect, aligning the capabilities and restrictions with The OpenGL ES Shading Language 1.00 (aka, the shading language of OpenGL ES2 and WebGL 1.0). All built-in functions from sections 8.1 through 8.6 implemented & tested on all backends. Removed types and features that require newer versions of GLSL: https://review.skia.org/346657 [Non-square matrices] https://review.skia.org/347046 [uint, short, ushort, byte, ubyte] https://review.skia.org/349056 [while and do-while loops] https://review.skia.org/350030 [Bitwise operators and integer remainder]

  • Add SkShadowUtils::GetLocalBounds. Generates bounding box for shadows relative to path. https://review.skia.org/351922

  • Removed SkPerlinNoiseShader::MakeImprovedNoise. https://review.skia.org/352057

  • Removed deprecated version of MakeFromYUVATextures. Use the version that takes GrYUVABackendTextures instead. https://review.skia.org/345174

  • SkAnimatedImage: Always respect exif orientation Replace SkPixmapPriv::ShouldSwapWidthHeight with SkEncodedOriginSwapsWidthHeight. https://review.skia.org/344762

  • Add kDirectionalLight_ShadowFlag support. If enabled, light position represents a vector pointing towards the light, and light radius is blur radius at elevation 1. https://review.skia.org/321792

  • Support GL_LUMINANCE8_ALPHA8 textures. These can be used with GrBackendTexture APIs on GrDirectContext and as planes of YUVA images via GrYUVABackendTextures. https://review.skia.org/344761

  • Removed previously deprecated SkImage::MakeFromYUVATexturesCopyToExternal. https://review.skia.org/342077

  • Add versions of GrDirectContext::createBackendTexture and updateBackendTexture that take a GrSurfaceOrigin. The previous versions are deprecated. https://review.skia.org/341005

  • Remove support for deprecated kDontClipToLayer_SaveLayerFlag in SkCanvas::SaveLayerRec https://review.skia.org/339988

  • Expose more info in SkCodec::FrameInfo https://review.skia.org/339857

  • Added dither control to the SkImageFilters::Shader factory. https://review.skia.org/338156

  • Add MTLBinaryArchive parameter to GrMtlBackendContext. This allows Skia to cache PipelineStates in the given archive for faster shader compiles on future runs. The client must handle loading and saving of the archive. https://review.skia.org/333758

  • Deprecated enum SkYUVAInfo::PlanarConfig has been removed. https://review.skia.org/334161

  • Deprecated SkImage factories have been removed from SkDeferredDisplayListRecorder.

  • The following YUV image factories have been removed: SkImage::MakeFromYUVTexturesCopyWithExternalBackend SkImage::MakeFromNV12TexturesCopyWithExternalBackend Replacement pattern outlined below. 1) Make image using MakeFromYUVATextures 2) Make a SkSurface around result texture using SkSurface::MakeFromBackendTexture 3) surface->getCanvas()->drawImage(image, 0, 0); 4) surface->flushAndSubmit() 5) Optional: SkImage::MakeFromBackendTexture() to use as SkImage. https://review.skia.org/334596

  • Added a new interface for GrDirectContext creation in Metal, using a new struct called GrMtlBackendContext. The previous interface taking a MTLDevice and MTLCommandQueue is deprecated. https://review.skia.org/334426

  • SkCanvas::flush has been deprecated.


Milestone 88

  • SkYUVAInfo now has separate enums for division of channels among planes and the subsampling. The previous combined enum, PlanarConfig, is deprecated. https://review.skia.org/334102

  • Simplified SkDeferredDisplayListRecorder promise image API. Removed “release” callback and renamed “done” callback to “release”. The new “release” proc can be null. Added a new SkYUVAInfo-based factory for YUVA promise texture images and deprecated the old SkYUVAIndex-based one. https://review.skia.org/331836 https://review.skia.org/333519

  • Limit the types and intrinsics supported in SkRuntimeEffect to GLSL ES 1.00 https://review.skia.org/332597

  • Add AVIF support to SkHeifCodec.

  • Add support for creating SkSurfaceCharacterizations directly for use by a GrVkSecondaryCBDrawContext. https://review.skia.org/331877

  • Removed SkSurfaceProps::kLegacyFontHost_InitType, SkFontLCDConfig, and related code. The default pixel geometry for SkSurfaceProps is now kUnknown instead of kRGB_H. The removal was guarded by the SK_LEGACY_SURFACE_PROPS build flag which was later removed. https://review.skia.org/322490 https://review.skia.org/329364

  • Legacy 8-bit YUV interface removed from SkImageGenerator. Use more flexible SkYUVAPixmaps- based interface instead. https://review.skia.org/327917

  • New variant of SkImage::MakeFromYUVATextures. Takes a new type GrYUVATextures which wraps an SkYUVAInfo and compatible set of GrBackendTextures. The provides a more complete and structured specification of the planar configuration. Previous version is deprecated. Already deprecated MakeFromYUVATexturesCopyToExternal added to replace other deprecated APIs. It's not recommended that clients use this and instead use the pattern described in the API comment. https://review.skia.org/317762 https://review.skia.org/329956

  • Add field to GrContextOptions to disable mipmap support even if the backend supports it.

  • SkTPin() removed from public API.

  • Add new SkImageFilters::Blend factory function, in place of the now deprecated SkImageFilters::Xfermode factory function. Behavior is identical, but name better matches conventions in SkShader and SkColorFilter. https://review.skia.org/324623

  • SkImageFilters::Foo() factory functions now accept SkIRect, SkRect, and optional SkIRect* or SkRect*, instead of previously just the optional SkIRect*. Internally, the crop rects are stored as floats to allow for fractional crops to be defined in the local coordinate system (before transformation by the canvas matrix). https://review.skia.org/324622

  • Add new SkImageFilters::Shader factory and deprecate SkImageFilters::Paint factory. All supported/valid Paint() filters can be represented more cleanly as a Shader image filter. https://review.skia.org/323680

  • GrContext has been replaced by two separate classes: GrDirectContext which is the traditional notion of GrContext, and GrRecordingContext which is a context that is recording an SkDeferredDisplayList and therefore has reduced functionality. Unless you are using SkDeferredDisplayList, migrate directly to GrDirectContext in all cases.

  • CPU sync bool added to SkSurface::flushAndSubmit() and GrContext::flushAndSubmit()

  • Removed legacy variant of SkImage::MakeFromYUVAPixmaps. Use the version that takes SkYUVAPixmaps instead. It has a more structured description of the planar configuration. https://review.skia.org/322480

  • Some SkImage YUV image factories have been removed. Replacement patterns outlined below. SkImage::MakeFromYUVATexturesCopy 1) Make SkImage from YUVA planes using SkImage::MakeFromYUVATextures 2) Use Skia to allocate a surface using SkSurface::MakeRenderTarget 3) surface->getCanvas()->drawImage(image, 0, 0); 4) surface->makeImageSnapShot() produces RGBA image. SkImage::MakeFromYUVATexturesCopyWithExternalBackend 1) Make image using MakeFromYUVATextures 2) Make a SkSurface around result texture using SkSurface::MakeFromBackendTexture 3) surface->getCanvas()->drawImage(image, 0, 0); 4) surface->flushAndSubmit() 5) Optional: SkImage::MakeFromBackendTexture() to use as SkImage. SkImage::MakeFromNV12TexturesCopy Same as SkImage::MakeFromYUVATexturesCopy https://review.skia.org/321537

  • GrBackendRenderTargets which are created with a stencilBits param, now require the stencilBits to be 0, 8, or 16. https://review.skia.org/321545


Milestone 87

  • GrVkImageInfo now has a field for sample count. GrBackendRenderTarget constructor that took both a GrVkImageInfo and separate sample count is deprecated. Use the version without sample count instead. Similarly, GrD3DTextureResourceInfo now has a sample count field and GrBackendRenderTarget no longer takes a separate sample count for Direct3D. The sample count for GrBackendRenderTarget is now directly queried from MtlTexture rather than passed separately. The version that takes a separate sample count is deprecated and the parameter is ignored. https://review.skia.org/320262 https://review.skia.org/320757 https://review.skia.org/320956

  • Added deprecation warning for Metal support on MacOS 10.13, iOS 8.3, and older. https://review.skia.org/320260

  • GrVkImageInfo now has a field for sample count. GrBackendRenderTarget constructor that took both a GrVkImageInfo and separate sample count is deprecated. Use the version without sample count instead.

  • Update SkClipOp::kMax_EnumValue to include only intersect and difference when SK_SUPPORT_DEPRECATED_CLIPOPS is not defined. https://review.skia.org/320064

  • Add support for external allocator for Direct3D 12 backend. Defines base classes for an allocation associated with a backend texture and a a memory allocator to create such allocations. Adds memory allocator to backend context. https://review.skia.org/317243

  • Add new optional parameter to GrContext::setBackend[Texture/RenderTarget]State which can be used to return the previous GrBackendSurfaceMutableState before the requested change. https://review.skia.org/318698

  • New optimized clip stack for GPU backends. Enabled by default but old behavior based on SkClipStack can be restored by defining SK_DISABLE_NEW_GR_CLIP_STACK when building. It is not compatible with SK_SUPPORT_DEPRECATED_CLIPOPS and we are targeting the removal of support for the deprecated, expanding clip ops. https://review.skia.org/317209

  • GPU backends now properly honor the SkFilterQuality when calling drawAtlas. https://review.skia.org/313081

  • The signature of ‘main’ used with SkRuntimeEffect SkSL has changed. There is no longer an ‘inout half4 color’ parameter, effects must return their color instead. Valid signatures are now ‘half4 main()’ or ‘half4 main(float2 coord)’. https://review.skia.org/310756

  • New YUVA planar specifications for SkCodec, SkImageGenerator, SkImage::MakeFromYUVAPixmaps. Chroma subsampling is specified in more structured way. SkCodec and SkImageGenerator don't assume 3 planes with 8bit planar values. Old APIs are deprecated. https://review.skia.org/309658 https://review.skia.org/312886 https://review.skia.org/314276 https://review.skia.org/316837 https://review.skia.org/317097

  • Added VkImageUsageFlags to GrVkImageInfo struct.


Milestone 86

  • Remove support for ‘in’ variables from SkRuntimeEffect. API now exclusively refers to inputs as ‘uniforms’. https://review.skia.org/309050

  • Add SkImageGeneratorNDK and SkEncodeImageWithNDK for using Android's NDK APIs to decode and encode. https://review.skia.org/308185 https://review.skia.org/308800

  • SkImage:remove DecodeToRaster, DecodeToTexture https://review.skia.org/306331

  • Add GrContext api to update compressed backend textures. https://review.skia.org/302265

  • Rename GrMipMapped to GrMipmapped for consistency with new APIs. Also rename GrBackendTexture::hasMipMaps() to GrBackendTexture::hasMipmaps() https://review.skia.org/304576 https://review.skia.org/304598

  • Add option for clients to own semaphores after wait calls. https://review.skia.org/301216

  • Remove obsolete GrFlushFlags. https://review.skia.org/298818

  • Adds default flush() calls to SkSurface, SkImage, and GrContext. These calls do a basic flush without a submit. If you haven't updated Skia in a couple releases and still have flush() calls in your code that you expect to do a flush and submit, you should update all those to the previously added flushAndSubmit() calls instead. https://review.skia.org/299141

  • Enable BackendSemaphores for the Direct3D backend. https://review.skia.org/298752

  • Added SkImage:asyncRescaleAndReadPixels and SkImage::asyncRescaleAndReadPixelsYUV420 https://review.skia.org/299281

  • Ganesh is moving towards replacing GrContext with the GrDirectContext/GrRecordingContext pair. GrDirectContexts have direct access to the GPU and are very similar to the old GrContext. GrRecordingContexts are less powerful contexts that lack GPU access but provided context-like utilities during DDL recording. SkSurfaces and SkCanvas will now only return GrRecordingContexts. Clients requiring context features that need GPU access can then check (via GrRecordingContext::asDirectContext) if the available recording context is actually a direct context.

  • Replace #defined values in SkString with equivalent constexprs. http://review.skia.org/306160


Milestone 85

  • Added GrContext::oomed() which reports whether Skia has seen a GL_OUT_OF_MEMORY error from Open GL [ES] or VK_ERROR_OUT_OF_*_MEMORY from Vulkan. https://review.skia.org/298216

  • Add option on SkSurface::flush to pass in a GrBackendSurfaceMutableState which we will set the gpu backend surface to be at the end of the flush. https://review.skia.org/295567

  • Add GrContext function to set mutable state on a backend surface. Currently this is only used for setting vulkan VkImage layout and queue family. https://review.skia.org/293844

  • SkSurface factores that take GrBackendTexture or GrBackendRenderTarget now always call the release proc (if provided) on failure. SkSurface::replaceBackendTexture also calls the release proc on failure. https://review.skia.org/293762

  • SkSurface::asyncRescaleAndReadPixels and SkSurfaceasyncRescaleAndReadPixelsYUV420 now require explicit GrContext submit to guarantee finite time before callback is invoked. https://review.skia.org/292840

  • Add VkSharingMode field to GrVkImageInfo. https://review.skia.org/293559

  • Move SkBitmapRegionDecoder into client_utils/android.

  • SkCanvas.clear and SkCanvas.drawColor now accept SkColor4f in addition to SkColor.

  • Remove SkSurface::MakeFromBackendTextureAsRenderTarget. This factory existed to work around issues with GL_TEXTURE_RECTANGLE that existed in Chrome's command buffer. Those issues have since been resolved. Use SkSurface::MakeFromBackendTexutre or SkSurface::MakeFromBackendRenderTarget instead. https://review.skia.org/292719

  • Adds submittedProc callback to GrFlushInfo which will be called when the work from the flush call is submitted to the GPU. This is specifically useful for knowing when semahpores sent with the flush have been submitted and can be waiting on. https://review.skia.org/291078

  • GrContext submit is now required to be called in order to send GPU work to the actual GPU. The flush calls simply produces 3D API specific objects that are ready to be submitted (e.g. command buffers). For the GL backend, the flush will still send commands to the driver. However, clients should still assume the must call submit which is where any glFlush that is need for sync objects will be called. There, are flushAndSubmit() functions of GrContext, SkSurface, and SkImage that will act like the previous flush() functions. This will flush the work and immediately call submit. https://review.skia.org/289033

  • Remove deprecated version of flush calls on GrContext and SkSurface. https://review.skia.org/2290540

  • SkCanvas::drawVertices and drawPatch now support mapping an SkShader without explicit texture coordinates. If they're not supplied, the local positions (vertex position or patch cubic positions) will be directly used to sample the SkShader. https://review.skia.org/290130


Milestone 84

  • Add api on GrContext, updateBackendTexture that will upload new data to a GrBackendTexture. https://review.skia.org/288909

  • Add GrContext getter to SkSurface. https://review.skia.org/289479

  • Deprecate GrContext and SkSurface flush() call and replace ith with flushAndSubmit(). This only effects the default flush call that takes no parameters. https://review.skia.org/289478

  • GrContext::createBackendTexture functions that initialize the texture no longer guarantee that all the data has been uploaded and the gpu is done with the texture. Instead the client can assume the upload work has been submitted to the gpu and they must wait for that work to finish before deleting the texture. This can be done via their own synchronization or by passing in a finish proc into the create calls which will be called when it is safe to delete the texture (at least in terms of work done during the create). https://review.skia.org/286517

  • Remove unused SkMaskFilter helpers: compbine, compose Note: shadermaskfilter will likely be removed next (clipShader should serve)

  • Add back SkCanvas::kPreserveLCDText_SaveLayerFlag to indicate that saveLayer() will preserve LCD-text. All text in the layer must be drawn on opaque background to ensure correct rendering.

  • Add the new directory client_utils/ for code that is specific to a single client and should be considered separate from Skia proper. Move SkFrontBufferedStream into the subdir android/.

  • SkBitmap and SkPixmap‘s erase() methods now treat their color parameters consistently with the rest of Skia, with all SkColors and any untagged SkColor4fs interpreted as sRGB, not as a color in the bitmap’s color space. SkPixmap::erase(SkColor4f) now takes an SkColorSpace, so you can pass pixmap.colorSpace() if you want the old behavior.

  • SkCamera.h and SkMatrix44.h are DEPRECATED. Use SkM44 if you want to have 3d transformations.

  • Changed Dilate and Erode image filters to take SkScalar for radius instead of int. While the image filters themselves are defined in terms of discrete pixels, the radii provided by the user are mapped through the CTM so taking ints forced over discretization. After mapping through the CTM the radii are now rounded to pixels. https://review.skia.org/281731 https://review.skia.org/282636

  • Updated the contract of GrContext and SkSurface flush calls in regards to semaphores. Made it clear that the caller is responsible for deleting any initialized semaphores after the flush call regardless if we were able to submit them or not. Also, allows skia to only submit a subset of the requested semaphores if we failed to create some. https://review.skia.org/282265

  • SkCanvas::drawVertices will now always fill the triangles specified by the vertices. Previously, vertices with no colors and no (texture coordinates or shader) would be drawn in wireframe. https://review.skia.org/282043


Milestone 83

  • Remove localmatrix option from SkShaders::[Blend, Lerp]

  • Fill out Direct3D parameters for backend textures and backend rendertargets.

  • SkImage::makeTextureImage() takes an optional SkBudgeted param

  • Made non-GL builds of GPU backend more robust. https://review.skia.org/277456

  • MoltenVK support removed. Use Metal backend instead. https://review.skia.org/277612


Milestone 82

  • Removed drawBitmap and related functions from SkDevice; all public drawBitmap functions on SkCanvas automatically wrap the bitmap in an SkImage and call the equivalent drawImage function. Drawing mutable SkBitmaps will now incur a mandatory copy. Switch to using SkImage directly or mark the bitmap as immutable before drawing.

  • Removed “volatile” flag from SkVertices. All SkVertices objects are assumed to be volatile (the previous default behavior).

  • Removed exotic legacy bitmap functions from SkCanvas (drawBitmapLattic, drawBitmapNine); the exotic SkImage functions still exist.

  • Make it possible to selectively turn on/off individual encoders/decoders, using skia_use_(libpng/libjpeg_turbo/libwebp)(decode/encode).

  • Removed GrGpuResource, GrSurface, and GrTexture from public api. These were not meant to be public, and we now can move them into src. Also removed getTexture function from SkImage.h

  • Removed Bones from SkVertices

  • Added a field to GrContextOptions that controls whether GL errors are checked after GL calls that allocate textures, etc. It also controls checking for shader compile success, and program linking success.

  • Made SkDeferredDisplayList.h officially part of the public API (i.e., moved it to include/core). Also added a ProgramIterator to SkDeferredDisplayList which allows clients to pre-compile some of the shaders the DDL requires.

  • Added two new helper methods to SkSurfaceCharacterization: createBackendFormat and createFBO0. These make it easier for clients to create new surface characterizations that differ only a little from an existing surface characterization.

  • Removed SkTMax and SkTMin.

  • Removed SkTClamp and SkClampMax.

  • Removed SkScalarClampMax and SkScalarPin.

  • Removed SkMax32 and SkMin32.

  • Removed SkMaxScalar and SkMinScalar.

  • SkColorSetA now warns if the result is unused.

  • An SkImageInfo with a null SkColorSpace passed to SkCodec::getPixels() and related calls is treated as a request to do no color correction at decode time.

  • Add new APIs to add attributes to document structure node when creating a tagged PDF.

  • Remove CGFontRef parameter from SkCreateTypefaceFromCTFont. Use CTFontManagerCreateFontDescriptorFromData instead of CGFontCreateWithDataProvider to create CTFonts to avoid memory use issues.

  • Added SkCodec:: and SkAndroidCodec::getICCProfile for reporting the native ICC profile of an encoded image, even if it doesn't map to an SkColorSpace.

  • SkSurface::ReplaceBackendTexture takes ContentChangeMode as a parameter, which allow callers to specify whether retain a copy of the current content.

  • Enforce the existing documentation in SkCanvas::saveLayer that it ignores any mask filter on the restore SkPaint. The ‘coverage’ of a layer is ill-defined, and masking should be handled by pre-clipping or using the auxiliary clip mask image of the SaveLayerRec.


Milestone 81

  • Added support for GL_NV_fence extension.

  • Make SkImageInfo::validRowBytes require rowBytes to be pixel aligned. This makes SkBitmap match the behavior of raster SkSurfaces in rejecting non-aligned rowBytes.

  • Added an SkImage::MakeRasterFromCompressed entry point. Also updated SkImage::MakeFromCompressed to decompress the compressed image data if the GPU doesn‘t support the specified compression type (i.e., macOS Metal doesn’t support BC1_RGB8_UNORM so such compressed images will always be decompressed on that platform).

  • Added support for BC1 RGBA compressed textures

  • Added CachingHint to SkImage::makeRasterImage

  • Added SkAnimatedImage::getCurrentFrame()

  • Add support to create an SkSurface from an MTKView, with delayed acquisition of the MTLDrawable. Entry point: SkSurface::MakeFromMTKView

  • Removed SkIRect::EmptyIRect(). Use SkIRect::MakeEmpty() instead. https://review.skia.org/262382/

  • Moved SkRuntimeEffect to public API. This is the new (experimental) interface to custom SkSL shaders and color filters.

  • Added BC1 compressed format support. Metal and Vulkan seem to only support the BC formats on desktop machines.

  • Added compressed format support for backend texture creation API. This adds the following new entry points: GrContext::compressedBackendFormat GrContext::createCompressedBackendTexture The latter method comes in variants that allow color-initialized and compressed texture data initialized.

  • Added SkMatrix::MakeTrans(SkIVector) https://review.skia.org/259804


Milestone 80


Milestone 79


Milestone 78