| /* |
| * Copyright 2011 Google Inc. |
| * |
| * Use of this source code is governed by a BSD-style license that can be |
| * found in the LICENSE file. |
| */ |
| |
| #include "include/core/SkBitmap.h" |
| #include "include/core/SkCanvas.h" |
| #include "include/core/SkColor.h" |
| #include "include/core/SkPaint.h" |
| #include "include/core/SkPoint.h" |
| #include "include/core/SkRect.h" |
| #include "include/core/SkScalar.h" |
| #include "include/core/SkTypes.h" |
| #include "include/private/base/SkDebug.h" |
| #include "src/core/SkEdgeClipper.h" |
| #include "src/core/SkLineClipper.h" |
| #include "tests/Test.h" |
| |
| #include <array> |
| #include <cstring> |
| |
| static void test_hairclipping(skiatest::Reporter* reporter) { |
| SkBitmap bm; |
| bm.allocN32Pixels(4, 4); |
| bm.eraseColor(SK_ColorWHITE); |
| |
| SkPaint paint; |
| paint.setAntiAlias(true); |
| |
| SkCanvas canvas(bm); |
| canvas.clipRect(SkRect::MakeWH(SkIntToScalar(4), SkIntToScalar(2))); |
| canvas.drawLine(1.5f, 1.5f, |
| 3.5f, 3.5f, paint); |
| |
| /** |
| * We had a bug where we misinterpreted the bottom of the clip, and |
| * would draw another pixel (to the right in this case) on the same |
| * last scanline. i.e. we would draw to [2,1], even though this hairline |
| * should just draw to [1,1], [2,2], [3,3] modulo the clip. |
| * |
| * The result of this entire draw should be that we only draw to [1,1] |
| * |
| * Fixed in rev. 3366 |
| */ |
| for (int y = 0; y < 4; ++y) { |
| for (int x = 0; x < 4; ++x) { |
| bool nonWhite = (1 == y) && (1 == x); |
| SkPMColor c = *bm.getAddr32(x, y); |
| if (nonWhite) { |
| REPORTER_ASSERT(reporter, 0xFFFFFFFF != c); |
| } else { |
| REPORTER_ASSERT(reporter, 0xFFFFFFFF == c); |
| } |
| } |
| } |
| } |
| |
| static void test_edgeclipper() { |
| SkEdgeClipper clipper(false); |
| |
| const SkPoint pts[] = { |
| { 3.0995476e+010f, 42.929779f }, |
| { -3.0995163e+010f, 51.050385f }, |
| { -3.0995157e+010f, 51.050392f }, |
| { -3.0995134e+010f, 51.050400f }, |
| }; |
| |
| const SkRect clip = { 0, 0, SkIntToScalar(300), SkIntToScalar(200) }; |
| |
| // this should not assert, even though our choppers do a poor numerical |
| // job when computing their t values. |
| // http://code.google.com/p/skia/issues/detail?id=444 |
| clipper.clipCubic(pts, clip); |
| } |
| |
| static void test_intersectline(skiatest::Reporter* reporter) { |
| static const SkScalar L = 0; |
| static const SkScalar T = 0; |
| static const SkScalar R = SkIntToScalar(100); |
| static const SkScalar B = SkIntToScalar(100); |
| static const SkScalar CX = SkScalarHalf(L + R); |
| static const SkScalar CY = SkScalarHalf(T + B); |
| static const SkRect gR = { L, T, R, B }; |
| |
| size_t i; |
| SkPoint dst[2]; |
| |
| static const SkPoint gEmpty[] = { |
| // sides |
| { L, CY }, { L - 10, CY }, |
| { R, CY }, { R + 10, CY }, |
| { CX, T }, { CX, T - 10 }, |
| { CX, B }, { CX, B + 10 }, |
| // corners |
| { L, T }, { L - 10, T - 10 }, |
| { L, B }, { L - 10, B + 10 }, |
| { R, T }, { R + 10, T - 10 }, |
| { R, B }, { R + 10, B + 10 }, |
| }; |
| for (i = 0; i < std::size(gEmpty); i += 2) { |
| bool valid = SkLineClipper::IntersectLine(&gEmpty[i], gR, dst); |
| if (valid) { |
| SkDebugf("----- [%zu] %g %g -> %g %g\n", |
| i/2, dst[0].fX, dst[0].fY, dst[1].fX, dst[1].fY); |
| } |
| REPORTER_ASSERT(reporter, !valid); |
| } |
| |
| static const SkPoint gFull[] = { |
| // diagonals, chords |
| { L, T }, { R, B }, |
| { L, B }, { R, T }, |
| { CX, T }, { CX, B }, |
| { L, CY }, { R, CY }, |
| { CX, T }, { R, CY }, |
| { CX, T }, { L, CY }, |
| { L, CY }, { CX, B }, |
| { R, CY }, { CX, B }, |
| // edges |
| { L, T }, { L, B }, |
| { R, T }, { R, B }, |
| { L, T }, { R, T }, |
| { L, B }, { R, B }, |
| }; |
| for (i = 0; i < std::size(gFull); i += 2) { |
| bool valid = SkLineClipper::IntersectLine(&gFull[i], gR, dst); |
| if (!valid || 0 != memcmp(&gFull[i], dst, sizeof(dst))) { |
| SkDebugf("++++ [%zu] %g %g -> %g %g\n", |
| i/2, dst[0].fX, dst[0].fY, dst[1].fX, dst[1].fY); |
| } |
| REPORTER_ASSERT(reporter, valid && !memcmp(&gFull[i], dst, sizeof(dst))); |
| } |
| |
| static const SkPoint gPartial[] = { |
| { L - 10, CY }, { CX, CY }, { L, CY }, { CX, CY }, |
| { CX, T - 10 }, { CX, CY }, { CX, T }, { CX, CY }, |
| { R + 10, CY }, { CX, CY }, { R, CY }, { CX, CY }, |
| { CX, B + 10 }, { CX, CY }, { CX, B }, { CX, CY }, |
| // extended edges |
| { L, T - 10 }, { L, B + 10 }, { L, T }, { L, B }, |
| { R, T - 10 }, { R, B + 10 }, { R, T }, { R, B }, |
| { L - 10, T }, { R + 10, T }, { L, T }, { R, T }, |
| { L - 10, B }, { R + 10, B }, { L, B }, { R, B }, |
| }; |
| for (i = 0; i < std::size(gPartial); i += 4) { |
| bool valid = SkLineClipper::IntersectLine(&gPartial[i], gR, dst); |
| if (!valid || 0 != memcmp(&gPartial[i+2], dst, sizeof(dst))) { |
| SkDebugf("++++ [%zu] %g %g -> %g %g\n", |
| i/2, dst[0].fX, dst[0].fY, dst[1].fX, dst[1].fY); |
| } |
| REPORTER_ASSERT(reporter, valid && |
| !memcmp(&gPartial[i+2], dst, sizeof(dst))); |
| } |
| |
| } |
| |
| DEF_TEST(Clipper, reporter) { |
| test_intersectline(reporter); |
| test_edgeclipper(); |
| test_hairclipping(reporter); |
| } |
| |
| DEF_TEST(LineClipper_skbug_7981, r) { |
| SkPoint src[] = {{ -5.77698802E+17f, -1.81758057E+23f}, {38127, 2}}; |
| SkPoint dst[2]; |
| SkRect clip = { -32767, -32767, 32767, 32767 }; |
| |
| SkLineClipper::IntersectLine(src, clip, dst); |
| } |
| |