/*
 * Copyright 2012 Google Inc.
 *
 * Use of this source code is governed by a BSD-style license that can be
 * found in the LICENSE file.
 */

#include "SkBBoxHierarchy.h"
#include "SkBlurImageFilter.h"
#include "SkCanvas.h"
#include "SkColorMatrixFilter.h"
#include "SkColorPriv.h"
#include "SkDashPathEffect.h"
#include "SkData.h"
#include "SkImageGenerator.h"
#include "SkError.h"
#include "SkImageEncoder.h"
#include "SkImageGenerator.h"
#include "SkLayerInfo.h"
#include "SkPaint.h"
#include "SkPicture.h"
#include "SkPictureRecorder.h"
#include "SkPictureUtils.h"
#include "SkPixelRef.h"
#include "SkPixelSerializer.h"
#include "SkRRect.h"
#include "SkRandom.h"
#include "SkRecord.h"
#include "SkShader.h"
#include "SkStream.h"

#if SK_SUPPORT_GPU
#include "SkSurface.h"
#include "GrContextFactory.h"
#endif
#include "Test.h"

#include "SkLumaColorFilter.h"
#include "SkColorFilterImageFilter.h"

static void make_bm(SkBitmap* bm, int w, int h, SkColor color, bool immutable) {
    bm->allocN32Pixels(w, h);
    bm->eraseColor(color);
    if (immutable) {
        bm->setImmutable();
    }
}

/* Hit a few SkPicture::Analysis cases not handled elsewhere. */
static void test_analysis(skiatest::Reporter* reporter) {
    SkPictureRecorder recorder;

    SkCanvas* canvas = recorder.beginRecording(100, 100);
    {
        canvas->drawRect(SkRect::MakeWH(10, 10), SkPaint ());
    }
    SkAutoTUnref<SkPicture> picture(recorder.endRecording());
    REPORTER_ASSERT(reporter, !picture->willPlayBackBitmaps());

    canvas = recorder.beginRecording(100, 100);
    {
        SkPaint paint;
        // CreateBitmapShader is too smart for us; an empty (or 1x1) bitmap shader
        // gets optimized into a non-bitmap form, so we create a 2x2 bitmap here.
        SkBitmap bitmap;
        bitmap.allocPixels(SkImageInfo::MakeN32Premul(2, 2));
        bitmap.eraseColor(SK_ColorBLUE);
        *(bitmap.getAddr32(0, 0)) = SK_ColorGREEN;
        SkShader* shader = SkShader::CreateBitmapShader(bitmap, SkShader::kClamp_TileMode,
                                                        SkShader::kClamp_TileMode);
        paint.setShader(shader)->unref();
        REPORTER_ASSERT(reporter,
                        shader->asABitmap(NULL, NULL, NULL) == SkShader::kDefault_BitmapType);

        canvas->drawRect(SkRect::MakeWH(10, 10), paint);
    }
    picture.reset(recorder.endRecording());
    REPORTER_ASSERT(reporter, picture->willPlayBackBitmaps());
}


#ifdef SK_DEBUG
// Ensure that deleting an empty SkPicture does not assert. Asserts only fire
// in debug mode, so only run in debug mode.
static void test_deleting_empty_picture() {
    SkPictureRecorder recorder;
    // Creates an SkPictureRecord
    recorder.beginRecording(0, 0);
    // Turns that into an SkPicture
    SkAutoTUnref<SkPicture> picture(recorder.endRecording());
    // Ceates a new SkPictureRecord
    recorder.beginRecording(0, 0);
}

// Ensure that serializing an empty picture does not assert. Likewise only runs in debug mode.
static void test_serializing_empty_picture() {
    SkPictureRecorder recorder;
    recorder.beginRecording(0, 0);
    SkAutoTUnref<SkPicture> picture(recorder.endRecording());
    SkDynamicMemoryWStream stream;
    picture->serialize(&stream);
}
#endif

static void rand_op(SkCanvas* canvas, SkRandom& rand) {
    SkPaint paint;
    SkRect rect = SkRect::MakeWH(50, 50);

    SkScalar unit = rand.nextUScalar1();
    if (unit <= 0.3) {
//        SkDebugf("save\n");
        canvas->save();
    } else if (unit <= 0.6) {
//        SkDebugf("restore\n");
        canvas->restore();
    } else if (unit <= 0.9) {
//        SkDebugf("clip\n");
        canvas->clipRect(rect);
    } else {
//        SkDebugf("draw\n");
        canvas->drawPaint(paint);
    }
}

#if SK_SUPPORT_GPU

static void test_gpu_veto(skiatest::Reporter* reporter) {
    SkPictureRecorder recorder;

    SkCanvas* canvas = recorder.beginRecording(100, 100);
    {
        SkPath path;
        path.moveTo(0, 0);
        path.lineTo(50, 50);

        SkScalar intervals[] = { 1.0f, 1.0f };
        SkAutoTUnref<SkDashPathEffect> dash(SkDashPathEffect::Create(intervals, 2, 0));

        SkPaint paint;
        paint.setStyle(SkPaint::kStroke_Style);
        paint.setPathEffect(dash);

        for (int i = 0; i < 50; ++i) {
            canvas->drawPath(path, paint);
        }
    }
    SkAutoTUnref<SkPicture> picture(recorder.endRecording());
    // path effects currently render an SkPicture undesireable for GPU rendering

    const char *reason = NULL;
    REPORTER_ASSERT(reporter, !picture->suitableForGpuRasterization(NULL, &reason));
    REPORTER_ASSERT(reporter, reason);

    canvas = recorder.beginRecording(100, 100);
    {
        SkPath path;

        path.moveTo(0, 0);
        path.lineTo(0, 50);
        path.lineTo(25, 25);
        path.lineTo(50, 50);
        path.lineTo(50, 0);
        path.close();
        REPORTER_ASSERT(reporter, !path.isConvex());

        SkPaint paint;
        paint.setAntiAlias(true);
        for (int i = 0; i < 50; ++i) {
            canvas->drawPath(path, paint);
        }
    }
    picture.reset(recorder.endRecording());
    // A lot of small AA concave paths should be fine for GPU rendering
    REPORTER_ASSERT(reporter, picture->suitableForGpuRasterization(NULL));

    canvas = recorder.beginRecording(100, 100);
    {
        SkPath path;

        path.moveTo(0, 0);
        path.lineTo(0, 100);
        path.lineTo(50, 50);
        path.lineTo(100, 100);
        path.lineTo(100, 0);
        path.close();
        REPORTER_ASSERT(reporter, !path.isConvex());

        SkPaint paint;
        paint.setAntiAlias(true);
        for (int i = 0; i < 50; ++i) {
            canvas->drawPath(path, paint);
        }
    }
    picture.reset(recorder.endRecording());
    // A lot of large AA concave paths currently render an SkPicture undesireable for GPU rendering
    REPORTER_ASSERT(reporter, !picture->suitableForGpuRasterization(NULL));

    canvas = recorder.beginRecording(100, 100);
    {
        SkPath path;

        path.moveTo(0, 0);
        path.lineTo(0, 50);
        path.lineTo(25, 25);
        path.lineTo(50, 50);
        path.lineTo(50, 0);
        path.close();
        REPORTER_ASSERT(reporter, !path.isConvex());

        SkPaint paint;
        paint.setAntiAlias(true);
        paint.setStyle(SkPaint::kStroke_Style);
        paint.setStrokeWidth(0);
        for (int i = 0; i < 50; ++i) {
            canvas->drawPath(path, paint);
        }
    }
    picture.reset(recorder.endRecording());
    // hairline stroked AA concave paths are fine for GPU rendering
    REPORTER_ASSERT(reporter, picture->suitableForGpuRasterization(NULL));

    canvas = recorder.beginRecording(100, 100);
    {
        SkPaint paint;
        SkScalar intervals [] = { 10, 20 };
        SkPathEffect* pe = SkDashPathEffect::Create(intervals, 2, 25);
        paint.setPathEffect(pe)->unref();

        SkPoint points [2] = { { 0, 0 }, { 100, 0 } };

        for (int i = 0; i < 50; ++i) {
            canvas->drawPoints(SkCanvas::kLines_PointMode, 2, points, paint);
        }
    }
    picture.reset(recorder.endRecording());
    // fast-path dashed effects are fine for GPU rendering ...
    REPORTER_ASSERT(reporter, picture->suitableForGpuRasterization(NULL));

    canvas = recorder.beginRecording(100, 100);
    {
        SkPaint paint;
        SkScalar intervals [] = { 10, 20 };
        SkPathEffect* pe = SkDashPathEffect::Create(intervals, 2, 25);
        paint.setPathEffect(pe)->unref();

        for (int i = 0; i < 50; ++i) {
            canvas->drawRect(SkRect::MakeWH(10, 10), paint);
        }
    }
    picture.reset(recorder.endRecording());
    // ... but only when applied to drawPoint() calls
    REPORTER_ASSERT(reporter, !picture->suitableForGpuRasterization(NULL));

    // Nest the previous picture inside a new one.
    canvas = recorder.beginRecording(100, 100);
    {
        canvas->drawPicture(picture.get());
    }
    picture.reset(recorder.endRecording());
    REPORTER_ASSERT(reporter, !picture->suitableForGpuRasterization(NULL));
}

#endif

static void test_savelayer_extraction(skiatest::Reporter* reporter) {
    static const int kWidth = 100;
    static const int kHeight = 100;

    // Create complex paint that the bounding box computation code can't
    // optimize away
    SkScalar blueToRedMatrix[20] = { 0 };
    blueToRedMatrix[2] = blueToRedMatrix[18] = SK_Scalar1;
    SkAutoTUnref<SkColorFilter> blueToRed(SkColorMatrixFilter::Create(blueToRedMatrix));
    SkAutoTUnref<SkImageFilter> filter(SkColorFilterImageFilter::Create(blueToRed.get()));

    SkPaint complexPaint;
    complexPaint.setImageFilter(filter);

    SkAutoTUnref<SkPicture> pict, child;
    SkRTreeFactory bbhFactory;

    {
        SkPictureRecorder recorder;

        SkCanvas* c = recorder.beginRecording(SkIntToScalar(kWidth), SkIntToScalar(kHeight),
                                              &bbhFactory,
                                              SkPictureRecorder::kComputeSaveLayerInfo_RecordFlag);

        c->saveLayer(NULL, &complexPaint);
        c->restore();

        child.reset(recorder.endRecording());
    }

    // create a picture with the structure:
    // 1)
    //      SaveLayer
    //      Restore
    // 2)
    //      SaveLayer
    //          Translate
    //          SaveLayer w/ bound
    //          Restore
    //      Restore
    // 3)
    //      SaveLayer w/ copyable paint
    //      Restore
    // 4)
    //      SaveLayer
    //          DrawPicture (which has a SaveLayer/Restore pair)
    //      Restore
    // 5)
    //      SaveLayer
    //          DrawPicture with Matrix & Paint (with SaveLayer/Restore pair)
    //      Restore
    {
        SkPictureRecorder recorder;

        SkCanvas* c = recorder.beginRecording(SkIntToScalar(kWidth),
                                              SkIntToScalar(kHeight),
                                              &bbhFactory,
                                              SkPictureRecorder::kComputeSaveLayerInfo_RecordFlag);
        // 1)
        c->saveLayer(NULL, &complexPaint); // layer #0
        c->restore();

        // 2)
        c->saveLayer(NULL, NULL); // layer #1
            c->translate(kWidth / 2.0f, kHeight / 2.0f);
            SkRect r = SkRect::MakeXYWH(0, 0, kWidth/2, kHeight/2);
            c->saveLayer(&r, &complexPaint); // layer #2
            c->restore();
        c->restore();

        // 3)
        {
            c->saveLayer(NULL, &complexPaint); // layer #3
            c->restore();
        }

        SkPaint layerPaint;
        layerPaint.setColor(SK_ColorRED);  // Non-alpha only to avoid SaveLayerDrawRestoreNooper
        // 4)
        {
            c->saveLayer(NULL, &layerPaint);  // layer #4
                c->drawPicture(child);  // layer #5 inside picture
            c->restore();
        }
        // 5
        {
            SkPaint picturePaint;
            SkMatrix trans;
            trans.setTranslate(10, 10);

            c->saveLayer(NULL, &layerPaint);  // layer #6
                c->drawPicture(child, &trans, &picturePaint); // layer #7 inside picture
            c->restore();
        }

        pict.reset(recorder.endRecording());
    }

    // Now test out the SaveLayer extraction
    if (!SkCanvas::Internal_Private_GetIgnoreSaveLayerBounds()) {
        SkPicture::AccelData::Key key = SkLayerInfo::ComputeKey();

        const SkPicture::AccelData* data = pict->EXPERIMENTAL_getAccelData(key);
        REPORTER_ASSERT(reporter, data);

        const SkLayerInfo *gpuData = static_cast<const SkLayerInfo*>(data);
        REPORTER_ASSERT(reporter, 8 == gpuData->numBlocks());

        const SkLayerInfo::BlockInfo& info0 = gpuData->block(0);
        // The parent/child layers appear in reverse order
        const SkLayerInfo::BlockInfo& info1 = gpuData->block(2);
        const SkLayerInfo::BlockInfo& info2 = gpuData->block(1);

        const SkLayerInfo::BlockInfo& info3 = gpuData->block(3);

        // The parent/child layers appear in reverse order
        const SkLayerInfo::BlockInfo& info4 = gpuData->block(5);
        const SkLayerInfo::BlockInfo& info5 = gpuData->block(4);

        // The parent/child layers appear in reverse order
        const SkLayerInfo::BlockInfo& info6 = gpuData->block(7);
        const SkLayerInfo::BlockInfo& info7 = gpuData->block(6);

        REPORTER_ASSERT(reporter, NULL == info0.fPicture);
        REPORTER_ASSERT(reporter, kWidth == info0.fBounds.width() &&
                                  kHeight == info0.fBounds.height());
        REPORTER_ASSERT(reporter, info0.fLocalMat.isIdentity());
        REPORTER_ASSERT(reporter, info0.fPreMat.isIdentity());
        REPORTER_ASSERT(reporter, 0 == info0.fBounds.fLeft && 0 == info0.fBounds.fTop);
        REPORTER_ASSERT(reporter, NULL != info0.fPaint);
        REPORTER_ASSERT(reporter, !info0.fIsNested && !info0.fHasNestedLayers);

        REPORTER_ASSERT(reporter, NULL == info1.fPicture);
        REPORTER_ASSERT(reporter, kWidth/2.0 == info1.fBounds.width() &&
                                  kHeight/2.0 == info1.fBounds.height());
        REPORTER_ASSERT(reporter, info1.fLocalMat.isIdentity());
        REPORTER_ASSERT(reporter, info1.fPreMat.isIdentity());
        REPORTER_ASSERT(reporter, kWidth/2.0 == info1.fBounds.fLeft &&
                                  kHeight/2.0 == info1.fBounds.fTop);
        REPORTER_ASSERT(reporter, NULL == info1.fPaint);
        REPORTER_ASSERT(reporter, !info1.fIsNested &&
                                  info1.fHasNestedLayers); // has a nested SL

        REPORTER_ASSERT(reporter, NULL == info2.fPicture);
        REPORTER_ASSERT(reporter, kWidth / 2 == info2.fBounds.width() &&
                                  kHeight / 2 == info2.fBounds.height()); // bound reduces size
        REPORTER_ASSERT(reporter, !info2.fLocalMat.isIdentity());
        REPORTER_ASSERT(reporter, info2.fPreMat.isIdentity());
        REPORTER_ASSERT(reporter, kWidth / 2 == info2.fBounds.fLeft &&   // translated
                                  kHeight / 2 == info2.fBounds.fTop);
        REPORTER_ASSERT(reporter, NULL != info2.fPaint);
        REPORTER_ASSERT(reporter, info2.fIsNested && !info2.fHasNestedLayers); // is nested

        REPORTER_ASSERT(reporter, NULL == info3.fPicture);
        REPORTER_ASSERT(reporter, kWidth == info3.fBounds.width() &&
                                  kHeight == info3.fBounds.height());
        REPORTER_ASSERT(reporter, info3.fLocalMat.isIdentity());
        REPORTER_ASSERT(reporter, info3.fPreMat.isIdentity());
        REPORTER_ASSERT(reporter, 0 == info3.fBounds.fLeft && 0 == info3.fBounds.fTop);
        REPORTER_ASSERT(reporter, info3.fPaint);
        REPORTER_ASSERT(reporter, !info3.fIsNested && !info3.fHasNestedLayers);

        REPORTER_ASSERT(reporter, NULL == info4.fPicture);
        REPORTER_ASSERT(reporter, kWidth == info4.fBounds.width() &&
                                  kHeight == info4.fBounds.height());
        REPORTER_ASSERT(reporter, 0 == info4.fBounds.fLeft && 0 == info4.fBounds.fTop);
        REPORTER_ASSERT(reporter, info4.fLocalMat.isIdentity());
        REPORTER_ASSERT(reporter, info4.fPreMat.isIdentity());
        REPORTER_ASSERT(reporter, info4.fPaint);
        REPORTER_ASSERT(reporter, !info4.fIsNested &&
                                  info4.fHasNestedLayers); // has a nested SL

        REPORTER_ASSERT(reporter, child == info5.fPicture); // in a child picture
        REPORTER_ASSERT(reporter, kWidth == info5.fBounds.width() &&
                                  kHeight == info5.fBounds.height());
        REPORTER_ASSERT(reporter, 0 == info5.fBounds.fLeft && 0 == info5.fBounds.fTop);
        REPORTER_ASSERT(reporter, info5.fLocalMat.isIdentity());
        REPORTER_ASSERT(reporter, info5.fPreMat.isIdentity());
        REPORTER_ASSERT(reporter, NULL != info5.fPaint);
        REPORTER_ASSERT(reporter, info5.fIsNested && !info5.fHasNestedLayers); // is nested

        REPORTER_ASSERT(reporter, NULL == info6.fPicture);
        REPORTER_ASSERT(reporter, kWidth-10 == info6.fBounds.width() &&
                                  kHeight-10 == info6.fBounds.height());
        REPORTER_ASSERT(reporter, 10 == info6.fBounds.fLeft && 10 == info6.fBounds.fTop);
        REPORTER_ASSERT(reporter, info6.fLocalMat.isIdentity());
        REPORTER_ASSERT(reporter, info6.fPreMat.isIdentity());
        REPORTER_ASSERT(reporter, info6.fPaint);
        REPORTER_ASSERT(reporter, !info6.fIsNested &&
                                  info6.fHasNestedLayers); // has a nested SL

        REPORTER_ASSERT(reporter, child == info7.fPicture); // in a child picture
        REPORTER_ASSERT(reporter, kWidth == info7.fBounds.width() &&
                                  kHeight == info7.fBounds.height());
        REPORTER_ASSERT(reporter, 0 == info7.fBounds.fLeft && 0 == info7.fBounds.fTop);
        REPORTER_ASSERT(reporter, info7.fLocalMat.isIdentity());
        REPORTER_ASSERT(reporter, info7.fPreMat.isIdentity());
        REPORTER_ASSERT(reporter, NULL != info7.fPaint);
        REPORTER_ASSERT(reporter, info7.fIsNested && !info7.fHasNestedLayers); // is nested
    }
}

static void test_has_text(skiatest::Reporter* reporter) {
    SkPictureRecorder recorder;

    SkCanvas* canvas = recorder.beginRecording(100,100);
    {
        canvas->drawRect(SkRect::MakeWH(20, 20), SkPaint());
    }
    SkAutoTUnref<SkPicture> picture(recorder.endRecording());
    REPORTER_ASSERT(reporter, !picture->hasText());

    SkPoint point = SkPoint::Make(10, 10);
    canvas = recorder.beginRecording(100,100);
    {
        canvas->drawText("Q", 1, point.fX, point.fY, SkPaint());
    }
    picture.reset(recorder.endRecording());
    REPORTER_ASSERT(reporter, picture->hasText());

    canvas = recorder.beginRecording(100,100);
    {
        canvas->drawPosText("Q", 1, &point, SkPaint());
    }
    picture.reset(recorder.endRecording());
    REPORTER_ASSERT(reporter, picture->hasText());

    canvas = recorder.beginRecording(100,100);
    {
        canvas->drawPosTextH("Q", 1, &point.fX, point.fY, SkPaint());
    }
    picture.reset(recorder.endRecording());
    REPORTER_ASSERT(reporter, picture->hasText());

    canvas = recorder.beginRecording(100,100);
    {
        SkPath path;
        path.moveTo(0, 0);
        path.lineTo(50, 50);

        canvas->drawTextOnPathHV("Q", 1, path, point.fX, point.fY, SkPaint());
    }
    picture.reset(recorder.endRecording());
    REPORTER_ASSERT(reporter, picture->hasText());

    canvas = recorder.beginRecording(100,100);
    {
        SkPath path;
        path.moveTo(0, 0);
        path.lineTo(50, 50);

        canvas->drawTextOnPath("Q", 1, path, NULL, SkPaint());
    }
    picture.reset(recorder.endRecording());
    REPORTER_ASSERT(reporter, picture->hasText());

    // Nest the previous picture inside a new one.
    canvas = recorder.beginRecording(100,100);
    {
        canvas->drawPicture(picture.get());
    }
    picture.reset(recorder.endRecording());
    REPORTER_ASSERT(reporter, picture->hasText());
}

static void set_canvas_to_save_count_4(SkCanvas* canvas) {
    canvas->restoreToCount(1);
    canvas->save();
    canvas->save();
    canvas->save();
}

/**
 * A canvas that records the number of saves, saveLayers and restores.
 */
class SaveCountingCanvas : public SkCanvas {
public:
    SaveCountingCanvas(int width, int height)
        : INHERITED(width, height)
        , fSaveCount(0)
        , fSaveLayerCount(0)
        , fRestoreCount(0){
    }

    virtual SaveLayerStrategy willSaveLayer(const SkRect* bounds, const SkPaint* paint,
                                            SaveFlags flags) SK_OVERRIDE {
        ++fSaveLayerCount;
        return this->INHERITED::willSaveLayer(bounds, paint, flags);
    }

    void willSave() SK_OVERRIDE {
        ++fSaveCount;
        this->INHERITED::willSave();
    }

    void willRestore() SK_OVERRIDE {
        ++fRestoreCount;
        this->INHERITED::willRestore();
    }

    unsigned int getSaveCount() const { return fSaveCount; }
    unsigned int getSaveLayerCount() const { return fSaveLayerCount; }
    unsigned int getRestoreCount() const { return fRestoreCount; }

private:
    unsigned int fSaveCount;
    unsigned int fSaveLayerCount;
    unsigned int fRestoreCount;

    typedef SkCanvas INHERITED;
};

void check_save_state(skiatest::Reporter* reporter, SkPicture* picture,
                      unsigned int numSaves, unsigned int numSaveLayers,
                      unsigned int numRestores) {
    SaveCountingCanvas canvas(SkScalarCeilToInt(picture->cullRect().width()),
                              SkScalarCeilToInt(picture->cullRect().height()));

    picture->playback(&canvas);

    // Optimizations may have removed these,
    // so expect to have seen no more than num{Saves,SaveLayers,Restores}.
    REPORTER_ASSERT(reporter, numSaves >= canvas.getSaveCount());
    REPORTER_ASSERT(reporter, numSaveLayers >= canvas.getSaveLayerCount());
    REPORTER_ASSERT(reporter, numRestores >= canvas.getRestoreCount());
}

// This class exists so SkPicture can friend it and give it access to
// the 'partialReplay' method.
class SkPictureRecorderReplayTester {
public:
    static SkPicture* Copy(SkPictureRecorder* recorder) {
        SkPictureRecorder recorder2;

        SkCanvas* canvas = recorder2.beginRecording(10, 10);

        recorder->partialReplay(canvas);

        return recorder2.endRecording();
    }
};

static void create_imbalance(SkCanvas* canvas) {
    SkRect clipRect = SkRect::MakeWH(2, 2);
    SkRect drawRect = SkRect::MakeWH(10, 10);
    canvas->save();
        canvas->clipRect(clipRect, SkRegion::kReplace_Op);
        canvas->translate(1.0f, 1.0f);
        SkPaint p;
        p.setColor(SK_ColorGREEN);
        canvas->drawRect(drawRect, p);
    // no restore
}

// This tests that replaying a potentially unbalanced picture into a canvas
// doesn't affect the canvas' save count or matrix/clip state.
static void check_balance(skiatest::Reporter* reporter, SkPicture* picture) {
    SkBitmap bm;
    bm.allocN32Pixels(4, 3);
    SkCanvas canvas(bm);

    int beforeSaveCount = canvas.getSaveCount();

    SkMatrix beforeMatrix = canvas.getTotalMatrix();

    SkRect beforeClip;

    canvas.getClipBounds(&beforeClip);

    canvas.drawPicture(picture);

    REPORTER_ASSERT(reporter, beforeSaveCount == canvas.getSaveCount());
    REPORTER_ASSERT(reporter, beforeMatrix == canvas.getTotalMatrix());

    SkRect afterClip;

    canvas.getClipBounds(&afterClip);

    REPORTER_ASSERT(reporter, afterClip == beforeClip);
}

// Test out SkPictureRecorder::partialReplay
DEF_TEST(PictureRecorder_replay, reporter) {
    // check save/saveLayer state
    {
        SkPictureRecorder recorder;

        SkCanvas* canvas = recorder.beginRecording(10, 10);

        canvas->saveLayer(NULL, NULL);

        SkAutoTUnref<SkPicture> copy(SkPictureRecorderReplayTester::Copy(&recorder));

        // The extra save and restore comes from the Copy process.
        check_save_state(reporter, copy, 2, 1, 3);

        canvas->saveLayer(NULL, NULL);

        SkAutoTUnref<SkPicture> final(recorder.endRecording());

        check_save_state(reporter, final, 1, 2, 3);

        // The copy shouldn't pick up any operations added after it was made
        check_save_state(reporter, copy, 2, 1, 3);
    }

    // (partially) check leakage of draw ops
    {
        SkPictureRecorder recorder;

        SkCanvas* canvas = recorder.beginRecording(10, 10);

        SkRect r = SkRect::MakeWH(5, 5);
        SkPaint p;

        canvas->drawRect(r, p);

        SkAutoTUnref<SkPicture> copy(SkPictureRecorderReplayTester::Copy(&recorder));

        REPORTER_ASSERT(reporter, !copy->willPlayBackBitmaps());

        SkBitmap bm;
        make_bm(&bm, 10, 10, SK_ColorRED, true);

        r.offset(5.0f, 5.0f);
        canvas->drawBitmapRectToRect(bm, NULL, r);

        SkAutoTUnref<SkPicture> final(recorder.endRecording());
        REPORTER_ASSERT(reporter, final->willPlayBackBitmaps());

        REPORTER_ASSERT(reporter, copy->uniqueID() != final->uniqueID());

        // The snapshot shouldn't pick up any operations added after it was made
        REPORTER_ASSERT(reporter, !copy->willPlayBackBitmaps());
    }

    // Recreate the Android partialReplay test case
    {
        SkPictureRecorder recorder;

        SkCanvas* canvas = recorder.beginRecording(4, 3, NULL, 0);
        create_imbalance(canvas);

        int expectedSaveCount = canvas->getSaveCount();

        SkAutoTUnref<SkPicture> copy(SkPictureRecorderReplayTester::Copy(&recorder));
        check_balance(reporter, copy);

        REPORTER_ASSERT(reporter, expectedSaveCount = canvas->getSaveCount());

        // End the recording of source to test the picture finalization
        // process isn't complicated by the partialReplay step
        SkAutoTUnref<SkPicture> final(recorder.endRecording());
    }
}

static void test_unbalanced_save_restores(skiatest::Reporter* reporter) {
    SkCanvas testCanvas(100, 100);
    set_canvas_to_save_count_4(&testCanvas);

    REPORTER_ASSERT(reporter, 4 == testCanvas.getSaveCount());

    SkPaint paint;
    SkRect rect = SkRect::MakeLTRB(-10000000, -10000000, 10000000, 10000000);

    SkPictureRecorder recorder;

    {
        // Create picture with 2 unbalanced saves
        SkCanvas* canvas = recorder.beginRecording(100, 100);
        canvas->save();
        canvas->translate(10, 10);
        canvas->drawRect(rect, paint);
        canvas->save();
        canvas->translate(10, 10);
        canvas->drawRect(rect, paint);
        SkAutoTUnref<SkPicture> extraSavePicture(recorder.endRecording());

        testCanvas.drawPicture(extraSavePicture);
        REPORTER_ASSERT(reporter, 4 == testCanvas.getSaveCount());
    }

    set_canvas_to_save_count_4(&testCanvas);

    {
        // Create picture with 2 unbalanced restores
        SkCanvas* canvas = recorder.beginRecording(100, 100);
        canvas->save();
        canvas->translate(10, 10);
        canvas->drawRect(rect, paint);
        canvas->save();
        canvas->translate(10, 10);
        canvas->drawRect(rect, paint);
        canvas->restore();
        canvas->restore();
        canvas->restore();
        canvas->restore();
        SkAutoTUnref<SkPicture> extraRestorePicture(recorder.endRecording());

        testCanvas.drawPicture(extraRestorePicture);
        REPORTER_ASSERT(reporter, 4 == testCanvas.getSaveCount());
    }

    set_canvas_to_save_count_4(&testCanvas);

    {
        SkCanvas* canvas = recorder.beginRecording(100, 100);
        canvas->translate(10, 10);
        canvas->drawRect(rect, paint);
        SkAutoTUnref<SkPicture> noSavePicture(recorder.endRecording());

        testCanvas.drawPicture(noSavePicture);
        REPORTER_ASSERT(reporter, 4 == testCanvas.getSaveCount());
        REPORTER_ASSERT(reporter, testCanvas.getTotalMatrix().isIdentity());
    }
}

static void test_peephole() {
    SkRandom rand;

    SkPictureRecorder recorder;

    for (int j = 0; j < 100; j++) {
        SkRandom rand2(rand); // remember the seed

        SkCanvas* canvas = recorder.beginRecording(100, 100);

        for (int i = 0; i < 1000; ++i) {
            rand_op(canvas, rand);
        }
        SkAutoTUnref<SkPicture> picture(recorder.endRecording());

        rand = rand2;
    }

    {
        SkCanvas* canvas = recorder.beginRecording(100, 100);
        SkRect rect = SkRect::MakeWH(50, 50);

        for (int i = 0; i < 100; ++i) {
            canvas->save();
        }
        while (canvas->getSaveCount() > 1) {
            canvas->clipRect(rect);
            canvas->restore();
        }
        SkAutoTUnref<SkPicture> picture(recorder.endRecording());
    }
}

#ifndef SK_DEBUG
// Only test this is in release mode. We deliberately crash in debug mode, since a valid caller
// should never do this.
static void test_bad_bitmap() {
    // This bitmap has a width and height but no pixels. As a result, attempting to record it will
    // fail.
    SkBitmap bm;
    bm.setInfo(SkImageInfo::MakeN32Premul(100, 100));
    SkPictureRecorder recorder;
    SkCanvas* recordingCanvas = recorder.beginRecording(100, 100);
    recordingCanvas->drawBitmap(bm, 0, 0);
    SkAutoTUnref<SkPicture> picture(recorder.endRecording());

    SkCanvas canvas;
    canvas.drawPicture(picture);
}
#endif

// Encodes to PNG, unless there is already encoded data, in which case that gets
// used.
// FIXME: Share with PictureRenderer.cpp?
class PngPixelSerializer : public SkPixelSerializer {
public:
    bool onUseEncodedData(const void*, size_t) SK_OVERRIDE { return true; }
    SkData* onEncodePixels(const SkImageInfo& info, const void* pixels,
                           size_t rowBytes) SK_OVERRIDE {
        return SkImageEncoder::EncodeData(info, pixels, rowBytes, SkImageEncoder::kPNG_Type, 100);
    }
};

static SkData* serialized_picture_from_bitmap(const SkBitmap& bitmap) {
    SkPictureRecorder recorder;
    SkCanvas* canvas = recorder.beginRecording(SkIntToScalar(bitmap.width()),
                                               SkIntToScalar(bitmap.height()));
    canvas->drawBitmap(bitmap, 0, 0);
    SkAutoTUnref<SkPicture> picture(recorder.endRecording());

    SkDynamicMemoryWStream wStream;
    PngPixelSerializer serializer;
    picture->serialize(&wStream, &serializer);
    return wStream.copyToData();
}

struct ErrorContext {
    int fErrors;
    skiatest::Reporter* fReporter;
};

static void assert_one_parse_error_cb(SkError error, void* context) {
    ErrorContext* errorContext = static_cast<ErrorContext*>(context);
    errorContext->fErrors++;
    // This test only expects one error, and that is a kParseError. If there are others,
    // there is some unknown problem.
    REPORTER_ASSERT_MESSAGE(errorContext->fReporter, 1 == errorContext->fErrors,
                            "This threw more errors than expected.");
    REPORTER_ASSERT_MESSAGE(errorContext->fReporter, kParseError_SkError == error,
                            SkGetLastErrorString());
}

static void test_bitmap_with_encoded_data(skiatest::Reporter* reporter) {
    // Create a bitmap that will be encoded.
    SkBitmap original;
    make_bm(&original, 100, 100, SK_ColorBLUE, true);
    SkDynamicMemoryWStream wStream;
    if (!SkImageEncoder::EncodeStream(&wStream, original, SkImageEncoder::kPNG_Type, 100)) {
        return;
    }
    SkAutoDataUnref data(wStream.copyToData());

    SkBitmap bm;
    bool installSuccess = SkInstallDiscardablePixelRef(data, &bm);
    REPORTER_ASSERT(reporter, installSuccess);

    // Write both bitmaps to pictures, and ensure that the resulting data streams are the same.
    // Flattening original will follow the old path of performing an encode, while flattening bm
    // will use the already encoded data.
    SkAutoDataUnref picture1(serialized_picture_from_bitmap(original));
    SkAutoDataUnref picture2(serialized_picture_from_bitmap(bm));
    REPORTER_ASSERT(reporter, picture1->equals(picture2));
    // Now test that a parse error was generated when trying to create a new SkPicture without
    // providing a function to decode the bitmap.
    ErrorContext context;
    context.fErrors = 0;
    context.fReporter = reporter;
    SkSetErrorCallback(assert_one_parse_error_cb, &context);
    SkMemoryStream pictureStream(picture1);
    SkClearLastError();
    SkAutoTUnref<SkPicture> pictureFromStream(SkPicture::CreateFromStream(&pictureStream, NULL));
    REPORTER_ASSERT(reporter, pictureFromStream.get() != NULL);
    SkClearLastError();
    SkSetErrorCallback(NULL, NULL);
}

static void test_clip_bound_opt(skiatest::Reporter* reporter) {
    // Test for crbug.com/229011
    SkRect rect1 = SkRect::MakeXYWH(SkIntToScalar(4), SkIntToScalar(4),
                                    SkIntToScalar(2), SkIntToScalar(2));
    SkRect rect2 = SkRect::MakeXYWH(SkIntToScalar(7), SkIntToScalar(7),
                                    SkIntToScalar(1), SkIntToScalar(1));
    SkRect rect3 = SkRect::MakeXYWH(SkIntToScalar(6), SkIntToScalar(6),
                                    SkIntToScalar(1), SkIntToScalar(1));

    SkPath invPath;
    invPath.addOval(rect1);
    invPath.setFillType(SkPath::kInverseEvenOdd_FillType);
    SkPath path;
    path.addOval(rect2);
    SkPath path2;
    path2.addOval(rect3);
    SkIRect clipBounds;
    SkPictureRecorder recorder;

    // Testing conservative-raster-clip that is enabled by PictureRecord
    {
        SkCanvas* canvas = recorder.beginRecording(10, 10);
        canvas->clipPath(invPath, SkRegion::kIntersect_Op);
        bool nonEmpty = canvas->getClipDeviceBounds(&clipBounds);
        REPORTER_ASSERT(reporter, true == nonEmpty);
        REPORTER_ASSERT(reporter, 0 == clipBounds.fLeft);
        REPORTER_ASSERT(reporter, 0 == clipBounds.fTop);
        REPORTER_ASSERT(reporter, 10 == clipBounds.fBottom);
        REPORTER_ASSERT(reporter, 10 == clipBounds.fRight);
    }
    {
        SkCanvas* canvas = recorder.beginRecording(10, 10);
        canvas->clipPath(path, SkRegion::kIntersect_Op);
        canvas->clipPath(invPath, SkRegion::kIntersect_Op);
        bool nonEmpty = canvas->getClipDeviceBounds(&clipBounds);
        REPORTER_ASSERT(reporter, true == nonEmpty);
        REPORTER_ASSERT(reporter, 7 == clipBounds.fLeft);
        REPORTER_ASSERT(reporter, 7 == clipBounds.fTop);
        REPORTER_ASSERT(reporter, 8 == clipBounds.fBottom);
        REPORTER_ASSERT(reporter, 8 == clipBounds.fRight);
    }
    {
        SkCanvas* canvas = recorder.beginRecording(10, 10);
        canvas->clipPath(path, SkRegion::kIntersect_Op);
        canvas->clipPath(invPath, SkRegion::kUnion_Op);
        bool nonEmpty = canvas->getClipDeviceBounds(&clipBounds);
        REPORTER_ASSERT(reporter, true == nonEmpty);
        REPORTER_ASSERT(reporter, 0 == clipBounds.fLeft);
        REPORTER_ASSERT(reporter, 0 == clipBounds.fTop);
        REPORTER_ASSERT(reporter, 10 == clipBounds.fBottom);
        REPORTER_ASSERT(reporter, 10 == clipBounds.fRight);
    }
    {
        SkCanvas* canvas = recorder.beginRecording(10, 10);
        canvas->clipPath(path, SkRegion::kDifference_Op);
        bool nonEmpty = canvas->getClipDeviceBounds(&clipBounds);
        REPORTER_ASSERT(reporter, true == nonEmpty);
        REPORTER_ASSERT(reporter, 0 == clipBounds.fLeft);
        REPORTER_ASSERT(reporter, 0 == clipBounds.fTop);
        REPORTER_ASSERT(reporter, 10 == clipBounds.fBottom);
        REPORTER_ASSERT(reporter, 10 == clipBounds.fRight);
    }
    {
        SkCanvas* canvas = recorder.beginRecording(10, 10);
        canvas->clipPath(path, SkRegion::kReverseDifference_Op);
        bool nonEmpty = canvas->getClipDeviceBounds(&clipBounds);
        // True clip is actually empty in this case, but the best
        // determination we can make using only bounds as input is that the
        // clip is included in the bounds of 'path'.
        REPORTER_ASSERT(reporter, true == nonEmpty);
        REPORTER_ASSERT(reporter, 7 == clipBounds.fLeft);
        REPORTER_ASSERT(reporter, 7 == clipBounds.fTop);
        REPORTER_ASSERT(reporter, 8 == clipBounds.fBottom);
        REPORTER_ASSERT(reporter, 8 == clipBounds.fRight);
    }
    {
        SkCanvas* canvas = recorder.beginRecording(10, 10);
        canvas->clipPath(path, SkRegion::kIntersect_Op);
        canvas->clipPath(path2, SkRegion::kXOR_Op);
        bool nonEmpty = canvas->getClipDeviceBounds(&clipBounds);
        REPORTER_ASSERT(reporter, true == nonEmpty);
        REPORTER_ASSERT(reporter, 6 == clipBounds.fLeft);
        REPORTER_ASSERT(reporter, 6 == clipBounds.fTop);
        REPORTER_ASSERT(reporter, 8 == clipBounds.fBottom);
        REPORTER_ASSERT(reporter, 8 == clipBounds.fRight);
    }
}

/**
 * A canvas that records the number of clip commands.
 */
class ClipCountingCanvas : public SkCanvas {
public:
    ClipCountingCanvas(int width, int height)
        : INHERITED(width, height)
        , fClipCount(0){
    }

    virtual void onClipRect(const SkRect& r,
                            SkRegion::Op op,
                            ClipEdgeStyle edgeStyle) SK_OVERRIDE {
        fClipCount += 1;
        this->INHERITED::onClipRect(r, op, edgeStyle);
    }

    virtual void onClipRRect(const SkRRect& rrect,
                             SkRegion::Op op,
                             ClipEdgeStyle edgeStyle)SK_OVERRIDE {
        fClipCount += 1;
        this->INHERITED::onClipRRect(rrect, op, edgeStyle);
    }

    virtual void onClipPath(const SkPath& path,
                            SkRegion::Op op,
                            ClipEdgeStyle edgeStyle) SK_OVERRIDE {
        fClipCount += 1;
        this->INHERITED::onClipPath(path, op, edgeStyle);
    }

    void onClipRegion(const SkRegion& deviceRgn, SkRegion::Op op) SK_OVERRIDE {
        fClipCount += 1;
        this->INHERITED::onClipRegion(deviceRgn, op);
    }

    unsigned getClipCount() const { return fClipCount; }

private:
    unsigned fClipCount;

    typedef SkCanvas INHERITED;
};

static void test_clip_expansion(skiatest::Reporter* reporter) {
    SkPictureRecorder recorder;
    SkCanvas* canvas = recorder.beginRecording(10, 10);

    canvas->clipRect(SkRect::MakeEmpty(), SkRegion::kReplace_Op);
    // The following expanding clip should not be skipped.
    canvas->clipRect(SkRect::MakeXYWH(4, 4, 3, 3), SkRegion::kUnion_Op);
    // Draw something so the optimizer doesn't just fold the world.
    SkPaint p;
    p.setColor(SK_ColorBLUE);
    canvas->drawPaint(p);
    SkAutoTUnref<SkPicture> picture(recorder.endRecording());

    ClipCountingCanvas testCanvas(10, 10);
    picture->playback(&testCanvas);

    // Both clips should be present on playback.
    REPORTER_ASSERT(reporter, testCanvas.getClipCount() == 2);
}

static void test_hierarchical(skiatest::Reporter* reporter) {
    SkBitmap bm;
    make_bm(&bm, 10, 10, SK_ColorRED, true);

    SkPictureRecorder recorder;

    recorder.beginRecording(10, 10);
    SkAutoTUnref<SkPicture> childPlain(recorder.endRecording());
    REPORTER_ASSERT(reporter, !childPlain->willPlayBackBitmaps()); // 0

    recorder.beginRecording(10, 10)->drawBitmap(bm, 0, 0);
    SkAutoTUnref<SkPicture> childWithBitmap(recorder.endRecording());
    REPORTER_ASSERT(reporter, childWithBitmap->willPlayBackBitmaps()); // 1

    {
        SkCanvas* canvas = recorder.beginRecording(10, 10);
        canvas->drawPicture(childPlain);
        SkAutoTUnref<SkPicture> parentPP(recorder.endRecording());
        REPORTER_ASSERT(reporter, !parentPP->willPlayBackBitmaps()); // 0
    }
    {
        SkCanvas* canvas = recorder.beginRecording(10, 10);
        canvas->drawPicture(childWithBitmap);
        SkAutoTUnref<SkPicture> parentPWB(recorder.endRecording());
        REPORTER_ASSERT(reporter, parentPWB->willPlayBackBitmaps()); // 1
    }
    {
        SkCanvas* canvas = recorder.beginRecording(10, 10);
        canvas->drawBitmap(bm, 0, 0);
        canvas->drawPicture(childPlain);
        SkAutoTUnref<SkPicture> parentWBP(recorder.endRecording());
        REPORTER_ASSERT(reporter, parentWBP->willPlayBackBitmaps()); // 1
    }
    {
        SkCanvas* canvas = recorder.beginRecording(10, 10);
        canvas->drawBitmap(bm, 0, 0);
        canvas->drawPicture(childWithBitmap);
        SkAutoTUnref<SkPicture> parentWBWB(recorder.endRecording());
        REPORTER_ASSERT(reporter, parentWBWB->willPlayBackBitmaps()); // 2
    }
}

static void test_gen_id(skiatest::Reporter* reporter) {

    SkPictureRecorder recorder;
    recorder.beginRecording(0, 0);
    SkAutoTUnref<SkPicture> empty(recorder.endRecording());

    // Empty pictures should still have a valid ID
    REPORTER_ASSERT(reporter, empty->uniqueID() != SK_InvalidGenID);

    SkCanvas* canvas = recorder.beginRecording(1, 1);
    canvas->drawARGB(255, 255, 255, 255);
    SkAutoTUnref<SkPicture> hasData(recorder.endRecording());
    // picture should have a non-zero id after recording
    REPORTER_ASSERT(reporter, hasData->uniqueID() != SK_InvalidGenID);

    // both pictures should have different ids
    REPORTER_ASSERT(reporter, hasData->uniqueID() != empty->uniqueID());
}

static void test_bytes_used(skiatest::Reporter* reporter) {
    SkPictureRecorder recorder;

    recorder.beginRecording(0, 0);
    SkAutoTUnref<SkPicture> empty(recorder.endRecording());

    // Sanity check to make sure we aren't under-measuring.
    REPORTER_ASSERT(reporter, SkPictureUtils::ApproximateBytesUsed(empty.get()) >=
                              sizeof(SkPicture) + sizeof(SkRecord));

    // Protect against any unintentional bloat.
    size_t approxUsed = SkPictureUtils::ApproximateBytesUsed(empty.get());
    REPORTER_ASSERT(reporter, approxUsed <= 136);

    // Sanity check of nested SkPictures.
    SkPictureRecorder r2;
    r2.beginRecording(0, 0);
    r2.getRecordingCanvas()->drawPicture(empty.get());
    SkAutoTUnref<SkPicture> nested(r2.endRecording());

    REPORTER_ASSERT(reporter, SkPictureUtils::ApproximateBytesUsed(nested.get()) >
                              SkPictureUtils::ApproximateBytesUsed(empty.get()));
}

DEF_TEST(Picture, reporter) {
#ifdef SK_DEBUG
    test_deleting_empty_picture();
    test_serializing_empty_picture();
#else
    test_bad_bitmap();
#endif
    test_unbalanced_save_restores(reporter);
    test_peephole();
#if SK_SUPPORT_GPU
    test_gpu_veto(reporter);
#endif
    test_has_text(reporter);
    test_analysis(reporter);
    test_bitmap_with_encoded_data(reporter);
    test_clip_bound_opt(reporter);
    test_clip_expansion(reporter);
    test_hierarchical(reporter);
    test_gen_id(reporter);
    test_savelayer_extraction(reporter);
    test_bytes_used(reporter);
}

static void draw_bitmaps(const SkBitmap bitmap, SkCanvas* canvas) {
    const SkPaint paint;
    const SkRect rect = { 5.0f, 5.0f, 8.0f, 8.0f };
    const SkIRect irect =  { 2, 2, 3, 3 };

    // Don't care what these record, as long as they're legal.
    canvas->drawBitmap(bitmap, 0.0f, 0.0f, &paint);
    canvas->drawBitmapRectToRect(bitmap, &rect, rect, &paint, SkCanvas::kNone_DrawBitmapRectFlag);
    canvas->drawBitmapNine(bitmap, irect, rect, &paint);
    canvas->drawSprite(bitmap, 1, 1);
}

static void test_draw_bitmaps(SkCanvas* canvas) {
    SkBitmap empty;
    draw_bitmaps(empty, canvas);
    empty.setInfo(SkImageInfo::MakeN32Premul(10, 10));
    draw_bitmaps(empty, canvas);
}

DEF_TEST(Picture_EmptyBitmap, r) {
    SkPictureRecorder recorder;
    test_draw_bitmaps(recorder.beginRecording(10, 10));
    SkAutoTUnref<SkPicture> picture(recorder.endRecording());
}

DEF_TEST(Canvas_EmptyBitmap, r) {
    SkBitmap dst;
    dst.allocN32Pixels(10, 10);
    SkCanvas canvas(dst);

    test_draw_bitmaps(&canvas);
}

DEF_TEST(DontOptimizeSaveLayerDrawDrawRestore, reporter) {
    // This test is from crbug.com/344987.
    // The commands are:
    //   saveLayer with paint that modifies alpha
    //     drawBitmapRectToRect
    //     drawBitmapRectToRect
    //   restore
    // The bug was that this structure was modified so that:
    //  - The saveLayer and restore were eliminated
    //  - The alpha was only applied to the first drawBitmapRectToRect

    // This test draws blue and red squares inside a 50% transparent
    // layer.  Both colours should show up muted.
    // When the bug is present, the red square (the second bitmap)
    // shows upwith full opacity.

    SkBitmap blueBM;
    make_bm(&blueBM, 100, 100, SkColorSetARGB(255, 0, 0, 255), true);
    SkBitmap redBM;
    make_bm(&redBM, 100, 100, SkColorSetARGB(255, 255, 0, 0), true);
    SkPaint semiTransparent;
    semiTransparent.setAlpha(0x80);

    SkPictureRecorder recorder;
    SkCanvas* canvas = recorder.beginRecording(100, 100);
    canvas->drawARGB(0, 0, 0, 0);

    canvas->saveLayer(0, &semiTransparent);
    canvas->drawBitmap(blueBM, 25, 25);
    canvas->drawBitmap(redBM, 50, 50);
    canvas->restore();

    SkAutoTUnref<SkPicture> picture(recorder.endRecording());

    // Now replay the picture back on another canvas
    // and check a couple of its pixels.
    SkBitmap replayBM;
    make_bm(&replayBM, 100, 100, SK_ColorBLACK, false);
    SkCanvas replayCanvas(replayBM);
    picture->playback(&replayCanvas);
    replayCanvas.flush();

    // With the bug present, at (55, 55) we would get a fully opaque red
    // intead of a dark red.
    REPORTER_ASSERT(reporter, replayBM.getColor(30, 30) == 0xff000080);
    REPORTER_ASSERT(reporter, replayBM.getColor(55, 55) == 0xff800000);
}

struct CountingBBH : public SkBBoxHierarchy {
    mutable int searchCalls;

    CountingBBH() : searchCalls(0) {}

    void search(const SkRect& query, SkTDArray<unsigned>* results) const SK_OVERRIDE {
        this->searchCalls++;
    }

    void insert(SkAutoTMalloc<SkRect>*, int) SK_OVERRIDE {}
    virtual size_t bytesUsed() const SK_OVERRIDE { return 0; }
};

class SpoonFedBBHFactory : public SkBBHFactory {
public:
    explicit SpoonFedBBHFactory(SkBBoxHierarchy* bbh) : fBBH(bbh) {}
    SkBBoxHierarchy* operator()(const SkRect&) const SK_OVERRIDE {
        return SkRef(fBBH);
    }
private:
    SkBBoxHierarchy* fBBH;
};

// When the canvas clip covers the full picture, we don't need to call the BBH.
DEF_TEST(Picture_SkipBBH, r) {
    CountingBBH bbh;
    SpoonFedBBHFactory factory(&bbh);

    SkPictureRecorder recorder;
    recorder.beginRecording(320, 240, &factory);
    SkAutoTUnref<const SkPicture> picture(recorder.endRecording());

    SkCanvas big(640, 480), small(300, 200);

    picture->playback(&big);
    REPORTER_ASSERT(r, bbh.searchCalls == 0);

    picture->playback(&small);
    REPORTER_ASSERT(r, bbh.searchCalls == 1);
}

DEF_TEST(Picture_BitmapLeak, r) {
    SkBitmap mut, immut;
    mut.allocN32Pixels(300, 200);
    immut.allocN32Pixels(300, 200);
    immut.setImmutable();
    SkASSERT(!mut.isImmutable());
    SkASSERT(immut.isImmutable());

    // No one can hold a ref on our pixels yet.
    REPORTER_ASSERT(r, mut.pixelRef()->unique());
    REPORTER_ASSERT(r, immut.pixelRef()->unique());

    SkAutoTUnref<const SkPicture> pic;
    {
        // we want the recorder to go out of scope before our subsequent checks, so we
        // place it inside local braces.
        SkPictureRecorder rec;
        SkCanvas* canvas = rec.beginRecording(1920, 1200);
            canvas->drawBitmap(mut, 0, 0);
            canvas->drawBitmap(immut, 800, 600);
        pic.reset(rec.endRecording());
    }

    // The picture shares the immutable pixels but copies the mutable ones.
    REPORTER_ASSERT(r, mut.pixelRef()->unique());
    REPORTER_ASSERT(r, !immut.pixelRef()->unique());

    // When the picture goes away, it's just our bitmaps holding the refs.
    pic.reset(NULL);
    REPORTER_ASSERT(r, mut.pixelRef()->unique());
    REPORTER_ASSERT(r, immut.pixelRef()->unique());
}