/*
 * Copyright 2019 Google LLC.
 *
 * Use of this source code is governed by a BSD-style license that can be
 * found in the LICENSE file.
 */

#ifndef GrPathTessellationShader_DEFINED
#define GrPathTessellationShader_DEFINED

#include "src/gpu/glsl/GrGLSLGeometryProcessor.h"
#include "src/gpu/tessellate/GrTessellationPathRenderer.h"
#include "src/gpu/tessellate/shaders/GrTessellationShader.h"

// This is the base class for shaders in the GPU tessellator that fill paths.
class GrPathTessellationShader : public GrTessellationShader {
public:
    // How many triangles are in a curve with 2^resolveLevel line segments?
    constexpr static int NumCurveTrianglesAtResolveLevel(int resolveLevel) {
        // resolveLevel=0 -> 0 line segments -> 0 triangles
        // resolveLevel=1 -> 2 line segments -> 1 triangle
        // resolveLevel=2 -> 4 line segments -> 3 triangles
        // resolveLevel=3 -> 8 line segments -> 7 triangles
        // ...
        return (1 << resolveLevel) - 1;
    }

    enum class PatchType : bool {
        // An ice cream cone shaped patch, with 4 curve control points on top of a triangle that
        // fans from a 5th point at the center of the contour. (5 points per patch.)
        kWedges,
        // A standalone closed curve made up 4 control points. (4 points per patch.)
        kCurves
    };

    // Uses instanced draws to triangulate curves with a "middle-out" topology. Middle-out draws a
    // triangle with vertices at T=[0, 1/2, 1] and then recurses breadth first:
    //
    //   depth=0: T=[0, 1/2, 1]
    //   depth=1: T=[0, 1/4, 2/4], T=[2/4, 3/4, 1]
    //   depth=2: T=[0, 1/8, 2/8], T=[2/8, 3/8, 4/8], T=[4/8, 5/8, 6/8], T=[6/8, 7/8, 1]
    //   ...
    //
    // The shader determines how many segments are required to render each individual curve
    // smoothly, and emits empty triangles at any vertices whose sk_VertexIDs are higher than
    // necessary. It is the caller's responsibility to draw enough vertices per instance for the
    // most complex curve in the batch to render smoothly (i.e., NumTrianglesAtResolveLevel() * 3).
    static GrPathTessellationShader* MakeMiddleOutFixedCountShader(const GrShaderCaps&,
                                                                   SkArenaAlloc*,
                                                                   const SkMatrix& viewMatrix,
                                                                   const SkPMColor4f&, PatchType);

    // This is the largest number of segments the middle-out shader will accept in a single
    // instance. If a curve requires more segments, it needs to be chopped.
    constexpr static int kMaxFixedCountSegments = 32;
    constexpr static int kMaxFixedCountResolveLevel = 5;  // log2(kMaxFixedCountSegments)
    static_assert(kMaxFixedCountSegments == 1 << kMaxFixedCountResolveLevel);

    // These functions define the vertex and index buffers that should be bound when drawing with
    // the middle-out fixed count shader. The data sequence is identical for any length of
    // tessellation segments, so the caller can use them with any instance length (up to
    // kMaxFixedCountResolveLevel).
    //
    // The "curve" and "wedge" buffers are nearly identical, but we keep them separate for now in
    // case there is a perf hit in the curve case for not using index 0.
    constexpr static int SizeOfVertexBufferForMiddleOutCurves() {
        constexpr int kMaxVertexCount = (1 << kMaxFixedCountResolveLevel) + 1;
        return kMaxVertexCount * kMiddleOutVertexStride;
    }
    static void InitializeVertexBufferForMiddleOutCurves(GrVertexWriter, size_t bufferSize);

    constexpr static size_t SizeOfIndexBufferForMiddleOutCurves() {
        constexpr int kMaxTriangleCount =
                NumCurveTrianglesAtResolveLevel(kMaxFixedCountResolveLevel);
        return kMaxTriangleCount * 3 * sizeof(uint16_t);
    }
    static void InitializeIndexBufferForMiddleOutCurves(GrVertexWriter, size_t bufferSize);

    constexpr static int SizeOfVertexBufferForMiddleOutWedges() {
        return SizeOfVertexBufferForMiddleOutCurves() + kMiddleOutVertexStride;
    }
    static void InitializeVertexBufferForMiddleOutWedges(GrVertexWriter, size_t bufferSize);

    constexpr static size_t SizeOfIndexBufferForMiddleOutWedges() {
        return SizeOfIndexBufferForMiddleOutCurves() + 3 * sizeof(uint16_t);
    }
    static void InitializeIndexBufferForMiddleOutWedges(GrVertexWriter, size_t bufferSize);

    // Uses GPU tessellation shaders to linearize, triangulate, and render cubic "wedge" patches. A
    // wedge is a 5-point patch consisting of 4 cubic control points, plus an anchor point fanning
    // from the center of the curve's resident contour.
    static GrPathTessellationShader* MakeHardwareTessellationShader(SkArenaAlloc*,
                                                                    const SkMatrix& viewMatrix,
                                                                    const SkPMColor4f&, PatchType);

    // Returns the stencil settings to use for a standard Redbook "stencil" pass.
    static const GrUserStencilSettings* StencilPathSettings(GrFillRule fillRule) {
        // Increments clockwise triangles and decrements counterclockwise. Used for "winding" fill.
        constexpr static GrUserStencilSettings kIncrDecrStencil(
            GrUserStencilSettings::StaticInitSeparate<
                0x0000,                                0x0000,
                GrUserStencilTest::kAlwaysIfInClip,    GrUserStencilTest::kAlwaysIfInClip,
                0xffff,                                0xffff,
                GrUserStencilOp::kIncWrap,             GrUserStencilOp::kDecWrap,
                GrUserStencilOp::kKeep,                GrUserStencilOp::kKeep,
                0xffff,                                0xffff>());

        // Inverts the bottom stencil bit. Used for "even/odd" fill.
        constexpr static GrUserStencilSettings kInvertStencil(
            GrUserStencilSettings::StaticInit<
                0x0000,
                GrUserStencilTest::kAlwaysIfInClip,
                0xffff,
                GrUserStencilOp::kInvert,
                GrUserStencilOp::kKeep,
                0x0001>());

        return (fillRule == GrFillRule::kNonzero) ? &kIncrDecrStencil : &kInvertStencil;
    }

    // Returns the stencil settings to use for a standard Redbook "fill" pass. Allows non-zero
    // stencil values to pass and write a color, and resets the stencil value back to zero; discards
    // immediately on stencil values of zero.
    static const GrUserStencilSettings* TestAndResetStencilSettings(bool isInverseFill = false) {
        constexpr static GrUserStencilSettings kTestAndResetStencil(
            GrUserStencilSettings::StaticInit<
                0x0000,
                // No need to check the clip because the previous stencil pass will have only
                // written to samples already inside the clip.
                GrUserStencilTest::kNotEqual,
                0xffff,
                GrUserStencilOp::kZero,
                GrUserStencilOp::kKeep,
                0xffff>());

        constexpr static GrUserStencilSettings kTestAndResetStencilInverted(
            GrUserStencilSettings::StaticInit<
                0x0000,
                // No need to check the clip because the previous stencil pass will have only
                // written to samples already inside the clip.
                GrUserStencilTest::kEqual,
                0xffff,
                GrUserStencilOp::kKeep,
                GrUserStencilOp::kZero,
                0xffff>());

        return isInverseFill ? &kTestAndResetStencilInverted : &kTestAndResetStencil;
    }

    // Creates a pipeline that does not write to the color buffer.
    static const GrPipeline* MakeStencilOnlyPipeline(const ProgramArgs&,
                                                     GrAAType,
                                                     GrTessellationPathRenderer::PathFlags,
                                                     const GrAppliedHardClip&);

protected:
    constexpr static size_t kMiddleOutVertexStride = 2 * sizeof(float);

    GrPathTessellationShader(ClassID classID, GrPrimitiveType primitiveType,
                             int tessellationPatchVertexCount, const SkMatrix& viewMatrix,
                             const SkPMColor4f& color)
            : GrTessellationShader(classID, primitiveType, tessellationPatchVertexCount, viewMatrix,
                                   color) {
    }

    // Default path tessellation shader implementation that manages a uniform matrix and color.
    class Impl : public GrGLSLGeometryProcessor {
    public:
        void onEmitCode(EmitArgs&, GrGPArgs*) final;
        void setData(const GrGLSLProgramDataManager&, const GrShaderCaps&,
                     const GrGeometryProcessor&) override;

    protected:
        // float4x3 unpack_rational_cubic(float2 p0, float2 p1, float2 p2, float2 p3) { ...
        //
        // Evaluate our point of interest using numerically stable linear interpolations. We add our
        // own "safe_mix" method to guarantee we get exactly "b" when T=1. The builtin mix()
        // function seems spec'd to behave this way, but empirical results results have shown it
        // does not always.
        static const char* kEvalRationalCubicFn;

        virtual void emitVertexCode(const GrShaderCaps&, const GrPathTessellationShader&,
                                    GrGLSLVertexBuilder*, GrGPArgs*) = 0;

        GrGLSLUniformHandler::UniformHandle fAffineMatrixUniform;
        GrGLSLUniformHandler::UniformHandle fTranslateUniform;
        GrGLSLUniformHandler::UniformHandle fColorUniform;
    };
};

#endif