| /* |
| * Copyright 2006 The Android Open Source Project |
| * |
| * Use of this source code is governed by a BSD-style license that can be |
| * found in the LICENSE file. |
| */ |
| |
| #include "SkFloatBits.h" |
| #include "SkMatrixPriv.h" |
| #include "SkNx.h" |
| #include "SkPaint.h" |
| #include "SkPoint3.h" |
| #include "SkRSXform.h" |
| #include "SkString.h" |
| #include <stddef.h> |
| |
| static void normalize_perspective(SkScalar mat[9]) { |
| // If it was interesting to never store the last element, we could divide all 8 other |
| // elements here by the 9th, making it 1.0... |
| // |
| // When SkScalar was SkFixed, we would sometimes rescale the entire matrix to keep its |
| // component values from getting too large. This is not a concern when using floats/doubles, |
| // so we do nothing now. |
| |
| // Disable this for now, but it could be enabled. |
| #if 0 |
| if (0 == mat[SkMatrix::kMPersp0] && 0 == mat[SkMatrix::kMPersp1]) { |
| SkScalar p2 = mat[SkMatrix::kMPersp2]; |
| if (p2 != 0 && p2 != 1) { |
| double inv = 1.0 / p2; |
| for (int i = 0; i < 6; ++i) { |
| mat[i] = SkDoubleToScalar(mat[i] * inv); |
| } |
| mat[SkMatrix::kMPersp2] = 1; |
| } |
| } |
| #endif |
| } |
| |
| // In a few places, we performed the following |
| // a * b + c * d + e |
| // as |
| // a * b + (c * d + e) |
| // |
| // sdot and scross are indended to capture these compound operations into a |
| // function, with an eye toward considering upscaling the intermediates to |
| // doubles for more precision (as we do in concat and invert). |
| // |
| // However, these few lines that performed the last add before the "dot", cause |
| // tiny image differences, so we guard that change until we see the impact on |
| // chrome's layouttests. |
| // |
| #define SK_LEGACY_MATRIX_MATH_ORDER |
| |
| static inline float SkDoubleToFloat(double x) { |
| return static_cast<float>(x); |
| } |
| |
| /* [scale-x skew-x trans-x] [X] [X'] |
| [skew-y scale-y trans-y] * [Y] = [Y'] |
| [persp-0 persp-1 persp-2] [1] [1 ] |
| */ |
| |
| void SkMatrix::reset() { |
| fMat[kMScaleX] = fMat[kMScaleY] = fMat[kMPersp2] = 1; |
| fMat[kMSkewX] = fMat[kMSkewY] = |
| fMat[kMTransX] = fMat[kMTransY] = |
| fMat[kMPersp0] = fMat[kMPersp1] = 0; |
| this->setTypeMask(kIdentity_Mask | kRectStaysRect_Mask); |
| } |
| |
| void SkMatrix::set9(const SkScalar buffer[]) { |
| memcpy(fMat, buffer, 9 * sizeof(SkScalar)); |
| normalize_perspective(fMat); |
| this->setTypeMask(kUnknown_Mask); |
| } |
| |
| void SkMatrix::setAffine(const SkScalar buffer[]) { |
| fMat[kMScaleX] = buffer[kAScaleX]; |
| fMat[kMSkewX] = buffer[kASkewX]; |
| fMat[kMTransX] = buffer[kATransX]; |
| fMat[kMSkewY] = buffer[kASkewY]; |
| fMat[kMScaleY] = buffer[kAScaleY]; |
| fMat[kMTransY] = buffer[kATransY]; |
| fMat[kMPersp0] = 0; |
| fMat[kMPersp1] = 0; |
| fMat[kMPersp2] = 1; |
| this->setTypeMask(kUnknown_Mask); |
| } |
| |
| // this guy aligns with the masks, so we can compute a mask from a varaible 0/1 |
| enum { |
| kTranslate_Shift, |
| kScale_Shift, |
| kAffine_Shift, |
| kPerspective_Shift, |
| kRectStaysRect_Shift |
| }; |
| |
| static const int32_t kScalar1Int = 0x3f800000; |
| |
| uint8_t SkMatrix::computePerspectiveTypeMask() const { |
| // Benchmarking suggests that replacing this set of SkScalarAs2sCompliment |
| // is a win, but replacing those below is not. We don't yet understand |
| // that result. |
| if (fMat[kMPersp0] != 0 || fMat[kMPersp1] != 0 || fMat[kMPersp2] != 1) { |
| // If this is a perspective transform, we return true for all other |
| // transform flags - this does not disable any optimizations, respects |
| // the rule that the type mask must be conservative, and speeds up |
| // type mask computation. |
| return SkToU8(kORableMasks); |
| } |
| |
| return SkToU8(kOnlyPerspectiveValid_Mask | kUnknown_Mask); |
| } |
| |
| uint8_t SkMatrix::computeTypeMask() const { |
| unsigned mask = 0; |
| |
| if (fMat[kMPersp0] != 0 || fMat[kMPersp1] != 0 || fMat[kMPersp2] != 1) { |
| // Once it is determined that that this is a perspective transform, |
| // all other flags are moot as far as optimizations are concerned. |
| return SkToU8(kORableMasks); |
| } |
| |
| if (fMat[kMTransX] != 0 || fMat[kMTransY] != 0) { |
| mask |= kTranslate_Mask; |
| } |
| |
| int m00 = SkScalarAs2sCompliment(fMat[SkMatrix::kMScaleX]); |
| int m01 = SkScalarAs2sCompliment(fMat[SkMatrix::kMSkewX]); |
| int m10 = SkScalarAs2sCompliment(fMat[SkMatrix::kMSkewY]); |
| int m11 = SkScalarAs2sCompliment(fMat[SkMatrix::kMScaleY]); |
| |
| if (m01 | m10) { |
| // The skew components may be scale-inducing, unless we are dealing |
| // with a pure rotation. Testing for a pure rotation is expensive, |
| // so we opt for being conservative by always setting the scale bit. |
| // along with affine. |
| // By doing this, we are also ensuring that matrices have the same |
| // type masks as their inverses. |
| mask |= kAffine_Mask | kScale_Mask; |
| |
| // For rectStaysRect, in the affine case, we only need check that |
| // the primary diagonal is all zeros and that the secondary diagonal |
| // is all non-zero. |
| |
| // map non-zero to 1 |
| m01 = m01 != 0; |
| m10 = m10 != 0; |
| |
| int dp0 = 0 == (m00 | m11) ; // true if both are 0 |
| int ds1 = m01 & m10; // true if both are 1 |
| |
| mask |= (dp0 & ds1) << kRectStaysRect_Shift; |
| } else { |
| // Only test for scale explicitly if not affine, since affine sets the |
| // scale bit. |
| if ((m00 ^ kScalar1Int) | (m11 ^ kScalar1Int)) { |
| mask |= kScale_Mask; |
| } |
| |
| // Not affine, therefore we already know secondary diagonal is |
| // all zeros, so we just need to check that primary diagonal is |
| // all non-zero. |
| |
| // map non-zero to 1 |
| m00 = m00 != 0; |
| m11 = m11 != 0; |
| |
| // record if the (p)rimary diagonal is all non-zero |
| mask |= (m00 & m11) << kRectStaysRect_Shift; |
| } |
| |
| return SkToU8(mask); |
| } |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| |
| bool operator==(const SkMatrix& a, const SkMatrix& b) { |
| const SkScalar* SK_RESTRICT ma = a.fMat; |
| const SkScalar* SK_RESTRICT mb = b.fMat; |
| |
| return ma[0] == mb[0] && ma[1] == mb[1] && ma[2] == mb[2] && |
| ma[3] == mb[3] && ma[4] == mb[4] && ma[5] == mb[5] && |
| ma[6] == mb[6] && ma[7] == mb[7] && ma[8] == mb[8]; |
| } |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| |
| // helper function to determine if upper-left 2x2 of matrix is degenerate |
| static inline bool is_degenerate_2x2(SkScalar scaleX, SkScalar skewX, |
| SkScalar skewY, SkScalar scaleY) { |
| SkScalar perp_dot = scaleX*scaleY - skewX*skewY; |
| return SkScalarNearlyZero(perp_dot, SK_ScalarNearlyZero*SK_ScalarNearlyZero); |
| } |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| |
| bool SkMatrix::isSimilarity(SkScalar tol) const { |
| // if identity or translate matrix |
| TypeMask mask = this->getType(); |
| if (mask <= kTranslate_Mask) { |
| return true; |
| } |
| if (mask & kPerspective_Mask) { |
| return false; |
| } |
| |
| SkScalar mx = fMat[kMScaleX]; |
| SkScalar my = fMat[kMScaleY]; |
| // if no skew, can just compare scale factors |
| if (!(mask & kAffine_Mask)) { |
| return !SkScalarNearlyZero(mx) && SkScalarNearlyEqual(SkScalarAbs(mx), SkScalarAbs(my)); |
| } |
| SkScalar sx = fMat[kMSkewX]; |
| SkScalar sy = fMat[kMSkewY]; |
| |
| if (is_degenerate_2x2(mx, sx, sy, my)) { |
| return false; |
| } |
| |
| // upper 2x2 is rotation/reflection + uniform scale if basis vectors |
| // are 90 degree rotations of each other |
| return (SkScalarNearlyEqual(mx, my, tol) && SkScalarNearlyEqual(sx, -sy, tol)) |
| || (SkScalarNearlyEqual(mx, -my, tol) && SkScalarNearlyEqual(sx, sy, tol)); |
| } |
| |
| bool SkMatrix::preservesRightAngles(SkScalar tol) const { |
| TypeMask mask = this->getType(); |
| |
| if (mask <= kTranslate_Mask) { |
| // identity, translate and/or scale |
| return true; |
| } |
| if (mask & kPerspective_Mask) { |
| return false; |
| } |
| |
| SkASSERT(mask & (kAffine_Mask | kScale_Mask)); |
| |
| SkScalar mx = fMat[kMScaleX]; |
| SkScalar my = fMat[kMScaleY]; |
| SkScalar sx = fMat[kMSkewX]; |
| SkScalar sy = fMat[kMSkewY]; |
| |
| if (is_degenerate_2x2(mx, sx, sy, my)) { |
| return false; |
| } |
| |
| // upper 2x2 is scale + rotation/reflection if basis vectors are orthogonal |
| SkVector vec[2]; |
| vec[0].set(mx, sy); |
| vec[1].set(sx, my); |
| |
| return SkScalarNearlyZero(vec[0].dot(vec[1]), SkScalarSquare(tol)); |
| } |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| |
| static inline SkScalar sdot(SkScalar a, SkScalar b, SkScalar c, SkScalar d) { |
| return a * b + c * d; |
| } |
| |
| static inline SkScalar sdot(SkScalar a, SkScalar b, SkScalar c, SkScalar d, |
| SkScalar e, SkScalar f) { |
| return a * b + c * d + e * f; |
| } |
| |
| static inline SkScalar scross(SkScalar a, SkScalar b, SkScalar c, SkScalar d) { |
| return a * b - c * d; |
| } |
| |
| void SkMatrix::setTranslate(SkScalar dx, SkScalar dy) { |
| if ((dx != 0) | (dy != 0)) { |
| fMat[kMTransX] = dx; |
| fMat[kMTransY] = dy; |
| |
| fMat[kMScaleX] = fMat[kMScaleY] = fMat[kMPersp2] = 1; |
| fMat[kMSkewX] = fMat[kMSkewY] = |
| fMat[kMPersp0] = fMat[kMPersp1] = 0; |
| |
| this->setTypeMask(kTranslate_Mask | kRectStaysRect_Mask); |
| } else { |
| this->reset(); |
| } |
| } |
| |
| void SkMatrix::preTranslate(SkScalar dx, SkScalar dy) { |
| const unsigned mask = this->getType(); |
| |
| if (mask <= kTranslate_Mask) { |
| fMat[kMTransX] += dx; |
| fMat[kMTransY] += dy; |
| } else if (mask & kPerspective_Mask) { |
| SkMatrix m; |
| m.setTranslate(dx, dy); |
| this->preConcat(m); |
| return; |
| } else { |
| fMat[kMTransX] += sdot(fMat[kMScaleX], dx, fMat[kMSkewX], dy); |
| fMat[kMTransY] += sdot(fMat[kMSkewY], dx, fMat[kMScaleY], dy); |
| } |
| this->updateTranslateMask(); |
| } |
| |
| void SkMatrix::postTranslate(SkScalar dx, SkScalar dy) { |
| if (this->hasPerspective()) { |
| SkMatrix m; |
| m.setTranslate(dx, dy); |
| this->postConcat(m); |
| } else { |
| fMat[kMTransX] += dx; |
| fMat[kMTransY] += dy; |
| this->updateTranslateMask(); |
| } |
| } |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| |
| void SkMatrix::setScale(SkScalar sx, SkScalar sy, SkScalar px, SkScalar py) { |
| if (1 == sx && 1 == sy) { |
| this->reset(); |
| } else { |
| this->setScaleTranslate(sx, sy, px - sx * px, py - sy * py); |
| } |
| } |
| |
| void SkMatrix::setScale(SkScalar sx, SkScalar sy) { |
| if (1 == sx && 1 == sy) { |
| this->reset(); |
| } else { |
| fMat[kMScaleX] = sx; |
| fMat[kMScaleY] = sy; |
| fMat[kMPersp2] = 1; |
| |
| fMat[kMTransX] = fMat[kMTransY] = |
| fMat[kMSkewX] = fMat[kMSkewY] = |
| fMat[kMPersp0] = fMat[kMPersp1] = 0; |
| |
| this->setTypeMask(kScale_Mask | kRectStaysRect_Mask); |
| } |
| } |
| |
| void SkMatrix::preScale(SkScalar sx, SkScalar sy, SkScalar px, SkScalar py) { |
| if (1 == sx && 1 == sy) { |
| return; |
| } |
| |
| SkMatrix m; |
| m.setScale(sx, sy, px, py); |
| this->preConcat(m); |
| } |
| |
| void SkMatrix::preScale(SkScalar sx, SkScalar sy) { |
| if (1 == sx && 1 == sy) { |
| return; |
| } |
| |
| // the assumption is that these multiplies are very cheap, and that |
| // a full concat and/or just computing the matrix type is more expensive. |
| // Also, the fixed-point case checks for overflow, but the float doesn't, |
| // so we can get away with these blind multiplies. |
| |
| fMat[kMScaleX] *= sx; |
| fMat[kMSkewY] *= sx; |
| fMat[kMPersp0] *= sx; |
| |
| fMat[kMSkewX] *= sy; |
| fMat[kMScaleY] *= sy; |
| fMat[kMPersp1] *= sy; |
| |
| // Attempt to simplify our type when applying an inverse scale. |
| // TODO: The persp/affine preconditions are in place to keep the mask consistent with |
| // what computeTypeMask() would produce (persp/skew always implies kScale). |
| // We should investigate whether these flag dependencies are truly needed. |
| if (fMat[kMScaleX] == 1 && fMat[kMScaleY] == 1 |
| && !(fTypeMask & (kPerspective_Mask | kAffine_Mask))) { |
| this->clearTypeMask(kScale_Mask); |
| } else { |
| this->orTypeMask(kScale_Mask); |
| } |
| } |
| |
| void SkMatrix::postScale(SkScalar sx, SkScalar sy, SkScalar px, SkScalar py) { |
| if (1 == sx && 1 == sy) { |
| return; |
| } |
| SkMatrix m; |
| m.setScale(sx, sy, px, py); |
| this->postConcat(m); |
| } |
| |
| void SkMatrix::postScale(SkScalar sx, SkScalar sy) { |
| if (1 == sx && 1 == sy) { |
| return; |
| } |
| SkMatrix m; |
| m.setScale(sx, sy); |
| this->postConcat(m); |
| } |
| |
| // this guy perhaps can go away, if we have a fract/high-precision way to |
| // scale matrices |
| bool SkMatrix::postIDiv(int divx, int divy) { |
| if (divx == 0 || divy == 0) { |
| return false; |
| } |
| |
| const float invX = 1.f / divx; |
| const float invY = 1.f / divy; |
| |
| fMat[kMScaleX] *= invX; |
| fMat[kMSkewX] *= invX; |
| fMat[kMTransX] *= invX; |
| |
| fMat[kMScaleY] *= invY; |
| fMat[kMSkewY] *= invY; |
| fMat[kMTransY] *= invY; |
| |
| this->setTypeMask(kUnknown_Mask); |
| return true; |
| } |
| |
| //////////////////////////////////////////////////////////////////////////////////// |
| |
| void SkMatrix::setSinCos(SkScalar sinV, SkScalar cosV, SkScalar px, SkScalar py) { |
| const SkScalar oneMinusCosV = 1 - cosV; |
| |
| fMat[kMScaleX] = cosV; |
| fMat[kMSkewX] = -sinV; |
| fMat[kMTransX] = sdot(sinV, py, oneMinusCosV, px); |
| |
| fMat[kMSkewY] = sinV; |
| fMat[kMScaleY] = cosV; |
| fMat[kMTransY] = sdot(-sinV, px, oneMinusCosV, py); |
| |
| fMat[kMPersp0] = fMat[kMPersp1] = 0; |
| fMat[kMPersp2] = 1; |
| |
| this->setTypeMask(kUnknown_Mask | kOnlyPerspectiveValid_Mask); |
| } |
| |
| SkMatrix& SkMatrix::setRSXform(const SkRSXform& xform) { |
| fMat[kMScaleX] = xform.fSCos; |
| fMat[kMSkewX] = -xform.fSSin; |
| fMat[kMTransX] = xform.fTx; |
| |
| fMat[kMSkewY] = xform.fSSin; |
| fMat[kMScaleY] = xform.fSCos; |
| fMat[kMTransY] = xform.fTy; |
| |
| fMat[kMPersp0] = fMat[kMPersp1] = 0; |
| fMat[kMPersp2] = 1; |
| |
| this->setTypeMask(kUnknown_Mask | kOnlyPerspectiveValid_Mask); |
| return *this; |
| } |
| |
| void SkMatrix::setSinCos(SkScalar sinV, SkScalar cosV) { |
| fMat[kMScaleX] = cosV; |
| fMat[kMSkewX] = -sinV; |
| fMat[kMTransX] = 0; |
| |
| fMat[kMSkewY] = sinV; |
| fMat[kMScaleY] = cosV; |
| fMat[kMTransY] = 0; |
| |
| fMat[kMPersp0] = fMat[kMPersp1] = 0; |
| fMat[kMPersp2] = 1; |
| |
| this->setTypeMask(kUnknown_Mask | kOnlyPerspectiveValid_Mask); |
| } |
| |
| void SkMatrix::setRotate(SkScalar degrees, SkScalar px, SkScalar py) { |
| SkScalar sinV, cosV; |
| sinV = SkScalarSinCos(SkDegreesToRadians(degrees), &cosV); |
| this->setSinCos(sinV, cosV, px, py); |
| } |
| |
| void SkMatrix::setRotate(SkScalar degrees) { |
| SkScalar sinV, cosV; |
| sinV = SkScalarSinCos(SkDegreesToRadians(degrees), &cosV); |
| this->setSinCos(sinV, cosV); |
| } |
| |
| void SkMatrix::preRotate(SkScalar degrees, SkScalar px, SkScalar py) { |
| SkMatrix m; |
| m.setRotate(degrees, px, py); |
| this->preConcat(m); |
| } |
| |
| void SkMatrix::preRotate(SkScalar degrees) { |
| SkMatrix m; |
| m.setRotate(degrees); |
| this->preConcat(m); |
| } |
| |
| void SkMatrix::postRotate(SkScalar degrees, SkScalar px, SkScalar py) { |
| SkMatrix m; |
| m.setRotate(degrees, px, py); |
| this->postConcat(m); |
| } |
| |
| void SkMatrix::postRotate(SkScalar degrees) { |
| SkMatrix m; |
| m.setRotate(degrees); |
| this->postConcat(m); |
| } |
| |
| //////////////////////////////////////////////////////////////////////////////////// |
| |
| void SkMatrix::setSkew(SkScalar sx, SkScalar sy, SkScalar px, SkScalar py) { |
| fMat[kMScaleX] = 1; |
| fMat[kMSkewX] = sx; |
| fMat[kMTransX] = -sx * py; |
| |
| fMat[kMSkewY] = sy; |
| fMat[kMScaleY] = 1; |
| fMat[kMTransY] = -sy * px; |
| |
| fMat[kMPersp0] = fMat[kMPersp1] = 0; |
| fMat[kMPersp2] = 1; |
| |
| this->setTypeMask(kUnknown_Mask | kOnlyPerspectiveValid_Mask); |
| } |
| |
| void SkMatrix::setSkew(SkScalar sx, SkScalar sy) { |
| fMat[kMScaleX] = 1; |
| fMat[kMSkewX] = sx; |
| fMat[kMTransX] = 0; |
| |
| fMat[kMSkewY] = sy; |
| fMat[kMScaleY] = 1; |
| fMat[kMTransY] = 0; |
| |
| fMat[kMPersp0] = fMat[kMPersp1] = 0; |
| fMat[kMPersp2] = 1; |
| |
| this->setTypeMask(kUnknown_Mask | kOnlyPerspectiveValid_Mask); |
| } |
| |
| void SkMatrix::preSkew(SkScalar sx, SkScalar sy, SkScalar px, SkScalar py) { |
| SkMatrix m; |
| m.setSkew(sx, sy, px, py); |
| this->preConcat(m); |
| } |
| |
| void SkMatrix::preSkew(SkScalar sx, SkScalar sy) { |
| SkMatrix m; |
| m.setSkew(sx, sy); |
| this->preConcat(m); |
| } |
| |
| void SkMatrix::postSkew(SkScalar sx, SkScalar sy, SkScalar px, SkScalar py) { |
| SkMatrix m; |
| m.setSkew(sx, sy, px, py); |
| this->postConcat(m); |
| } |
| |
| void SkMatrix::postSkew(SkScalar sx, SkScalar sy) { |
| SkMatrix m; |
| m.setSkew(sx, sy); |
| this->postConcat(m); |
| } |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| |
| bool SkMatrix::setRectToRect(const SkRect& src, const SkRect& dst, ScaleToFit align) { |
| if (src.isEmpty()) { |
| this->reset(); |
| return false; |
| } |
| |
| if (dst.isEmpty()) { |
| sk_bzero(fMat, 8 * sizeof(SkScalar)); |
| fMat[kMPersp2] = 1; |
| this->setTypeMask(kScale_Mask | kRectStaysRect_Mask); |
| } else { |
| SkScalar tx, sx = dst.width() / src.width(); |
| SkScalar ty, sy = dst.height() / src.height(); |
| bool xLarger = false; |
| |
| if (align != kFill_ScaleToFit) { |
| if (sx > sy) { |
| xLarger = true; |
| sx = sy; |
| } else { |
| sy = sx; |
| } |
| } |
| |
| tx = dst.fLeft - src.fLeft * sx; |
| ty = dst.fTop - src.fTop * sy; |
| if (align == kCenter_ScaleToFit || align == kEnd_ScaleToFit) { |
| SkScalar diff; |
| |
| if (xLarger) { |
| diff = dst.width() - src.width() * sy; |
| } else { |
| diff = dst.height() - src.height() * sy; |
| } |
| |
| if (align == kCenter_ScaleToFit) { |
| diff = SkScalarHalf(diff); |
| } |
| |
| if (xLarger) { |
| tx += diff; |
| } else { |
| ty += diff; |
| } |
| } |
| |
| this->setScaleTranslate(sx, sy, tx, ty); |
| } |
| return true; |
| } |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| |
| static inline float muladdmul(float a, float b, float c, float d) { |
| return SkDoubleToFloat((double)a * b + (double)c * d); |
| } |
| |
| static inline float rowcol3(const float row[], const float col[]) { |
| return row[0] * col[0] + row[1] * col[3] + row[2] * col[6]; |
| } |
| |
| static bool only_scale_and_translate(unsigned mask) { |
| return 0 == (mask & (SkMatrix::kAffine_Mask | SkMatrix::kPerspective_Mask)); |
| } |
| |
| void SkMatrix::setConcat(const SkMatrix& a, const SkMatrix& b) { |
| TypeMask aType = a.getType(); |
| TypeMask bType = b.getType(); |
| |
| if (a.isTriviallyIdentity()) { |
| *this = b; |
| } else if (b.isTriviallyIdentity()) { |
| *this = a; |
| } else if (only_scale_and_translate(aType | bType)) { |
| this->setScaleTranslate(a.fMat[kMScaleX] * b.fMat[kMScaleX], |
| a.fMat[kMScaleY] * b.fMat[kMScaleY], |
| a.fMat[kMScaleX] * b.fMat[kMTransX] + a.fMat[kMTransX], |
| a.fMat[kMScaleY] * b.fMat[kMTransY] + a.fMat[kMTransY]); |
| } else { |
| SkMatrix tmp; |
| |
| if ((aType | bType) & kPerspective_Mask) { |
| tmp.fMat[kMScaleX] = rowcol3(&a.fMat[0], &b.fMat[0]); |
| tmp.fMat[kMSkewX] = rowcol3(&a.fMat[0], &b.fMat[1]); |
| tmp.fMat[kMTransX] = rowcol3(&a.fMat[0], &b.fMat[2]); |
| tmp.fMat[kMSkewY] = rowcol3(&a.fMat[3], &b.fMat[0]); |
| tmp.fMat[kMScaleY] = rowcol3(&a.fMat[3], &b.fMat[1]); |
| tmp.fMat[kMTransY] = rowcol3(&a.fMat[3], &b.fMat[2]); |
| tmp.fMat[kMPersp0] = rowcol3(&a.fMat[6], &b.fMat[0]); |
| tmp.fMat[kMPersp1] = rowcol3(&a.fMat[6], &b.fMat[1]); |
| tmp.fMat[kMPersp2] = rowcol3(&a.fMat[6], &b.fMat[2]); |
| |
| normalize_perspective(tmp.fMat); |
| tmp.setTypeMask(kUnknown_Mask); |
| } else { |
| tmp.fMat[kMScaleX] = muladdmul(a.fMat[kMScaleX], |
| b.fMat[kMScaleX], |
| a.fMat[kMSkewX], |
| b.fMat[kMSkewY]); |
| |
| tmp.fMat[kMSkewX] = muladdmul(a.fMat[kMScaleX], |
| b.fMat[kMSkewX], |
| a.fMat[kMSkewX], |
| b.fMat[kMScaleY]); |
| |
| tmp.fMat[kMTransX] = muladdmul(a.fMat[kMScaleX], |
| b.fMat[kMTransX], |
| a.fMat[kMSkewX], |
| b.fMat[kMTransY]) + a.fMat[kMTransX]; |
| |
| tmp.fMat[kMSkewY] = muladdmul(a.fMat[kMSkewY], |
| b.fMat[kMScaleX], |
| a.fMat[kMScaleY], |
| b.fMat[kMSkewY]); |
| |
| tmp.fMat[kMScaleY] = muladdmul(a.fMat[kMSkewY], |
| b.fMat[kMSkewX], |
| a.fMat[kMScaleY], |
| b.fMat[kMScaleY]); |
| |
| tmp.fMat[kMTransY] = muladdmul(a.fMat[kMSkewY], |
| b.fMat[kMTransX], |
| a.fMat[kMScaleY], |
| b.fMat[kMTransY]) + a.fMat[kMTransY]; |
| |
| tmp.fMat[kMPersp0] = 0; |
| tmp.fMat[kMPersp1] = 0; |
| tmp.fMat[kMPersp2] = 1; |
| //SkDebugf("Concat mat non-persp type: %d\n", tmp.getType()); |
| //SkASSERT(!(tmp.getType() & kPerspective_Mask)); |
| tmp.setTypeMask(kUnknown_Mask | kOnlyPerspectiveValid_Mask); |
| } |
| *this = tmp; |
| } |
| } |
| |
| void SkMatrix::preConcat(const SkMatrix& mat) { |
| // check for identity first, so we don't do a needless copy of ourselves |
| // to ourselves inside setConcat() |
| if(!mat.isIdentity()) { |
| this->setConcat(*this, mat); |
| } |
| } |
| |
| void SkMatrix::postConcat(const SkMatrix& mat) { |
| // check for identity first, so we don't do a needless copy of ourselves |
| // to ourselves inside setConcat() |
| if (!mat.isIdentity()) { |
| this->setConcat(mat, *this); |
| } |
| } |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| |
| /* Matrix inversion is very expensive, but also the place where keeping |
| precision may be most important (here and matrix concat). Hence to avoid |
| bitmap blitting artifacts when walking the inverse, we use doubles for |
| the intermediate math, even though we know that is more expensive. |
| */ |
| |
| static inline SkScalar scross_dscale(SkScalar a, SkScalar b, |
| SkScalar c, SkScalar d, double scale) { |
| return SkDoubleToScalar(scross(a, b, c, d) * scale); |
| } |
| |
| static inline double dcross(double a, double b, double c, double d) { |
| return a * b - c * d; |
| } |
| |
| static inline SkScalar dcross_dscale(double a, double b, |
| double c, double d, double scale) { |
| return SkDoubleToScalar(dcross(a, b, c, d) * scale); |
| } |
| |
| static double sk_inv_determinant(const float mat[9], int isPerspective) { |
| double det; |
| |
| if (isPerspective) { |
| det = mat[SkMatrix::kMScaleX] * |
| dcross(mat[SkMatrix::kMScaleY], mat[SkMatrix::kMPersp2], |
| mat[SkMatrix::kMTransY], mat[SkMatrix::kMPersp1]) |
| + |
| mat[SkMatrix::kMSkewX] * |
| dcross(mat[SkMatrix::kMTransY], mat[SkMatrix::kMPersp0], |
| mat[SkMatrix::kMSkewY], mat[SkMatrix::kMPersp2]) |
| + |
| mat[SkMatrix::kMTransX] * |
| dcross(mat[SkMatrix::kMSkewY], mat[SkMatrix::kMPersp1], |
| mat[SkMatrix::kMScaleY], mat[SkMatrix::kMPersp0]); |
| } else { |
| det = dcross(mat[SkMatrix::kMScaleX], mat[SkMatrix::kMScaleY], |
| mat[SkMatrix::kMSkewX], mat[SkMatrix::kMSkewY]); |
| } |
| |
| // Since the determinant is on the order of the cube of the matrix members, |
| // compare to the cube of the default nearly-zero constant (although an |
| // estimate of the condition number would be better if it wasn't so expensive). |
| if (SkScalarNearlyZero(sk_double_to_float(det), |
| SK_ScalarNearlyZero * SK_ScalarNearlyZero * SK_ScalarNearlyZero)) { |
| return 0; |
| } |
| return 1.0 / det; |
| } |
| |
| void SkMatrix::SetAffineIdentity(SkScalar affine[6]) { |
| affine[kAScaleX] = 1; |
| affine[kASkewY] = 0; |
| affine[kASkewX] = 0; |
| affine[kAScaleY] = 1; |
| affine[kATransX] = 0; |
| affine[kATransY] = 0; |
| } |
| |
| bool SkMatrix::asAffine(SkScalar affine[6]) const { |
| if (this->hasPerspective()) { |
| return false; |
| } |
| if (affine) { |
| affine[kAScaleX] = this->fMat[kMScaleX]; |
| affine[kASkewY] = this->fMat[kMSkewY]; |
| affine[kASkewX] = this->fMat[kMSkewX]; |
| affine[kAScaleY] = this->fMat[kMScaleY]; |
| affine[kATransX] = this->fMat[kMTransX]; |
| affine[kATransY] = this->fMat[kMTransY]; |
| } |
| return true; |
| } |
| |
| void SkMatrix::ComputeInv(SkScalar dst[9], const SkScalar src[9], double invDet, bool isPersp) { |
| SkASSERT(src != dst); |
| SkASSERT(src && dst); |
| |
| if (isPersp) { |
| dst[kMScaleX] = scross_dscale(src[kMScaleY], src[kMPersp2], src[kMTransY], src[kMPersp1], invDet); |
| dst[kMSkewX] = scross_dscale(src[kMTransX], src[kMPersp1], src[kMSkewX], src[kMPersp2], invDet); |
| dst[kMTransX] = scross_dscale(src[kMSkewX], src[kMTransY], src[kMTransX], src[kMScaleY], invDet); |
| |
| dst[kMSkewY] = scross_dscale(src[kMTransY], src[kMPersp0], src[kMSkewY], src[kMPersp2], invDet); |
| dst[kMScaleY] = scross_dscale(src[kMScaleX], src[kMPersp2], src[kMTransX], src[kMPersp0], invDet); |
| dst[kMTransY] = scross_dscale(src[kMTransX], src[kMSkewY], src[kMScaleX], src[kMTransY], invDet); |
| |
| dst[kMPersp0] = scross_dscale(src[kMSkewY], src[kMPersp1], src[kMScaleY], src[kMPersp0], invDet); |
| dst[kMPersp1] = scross_dscale(src[kMSkewX], src[kMPersp0], src[kMScaleX], src[kMPersp1], invDet); |
| dst[kMPersp2] = scross_dscale(src[kMScaleX], src[kMScaleY], src[kMSkewX], src[kMSkewY], invDet); |
| } else { // not perspective |
| dst[kMScaleX] = SkDoubleToScalar(src[kMScaleY] * invDet); |
| dst[kMSkewX] = SkDoubleToScalar(-src[kMSkewX] * invDet); |
| dst[kMTransX] = dcross_dscale(src[kMSkewX], src[kMTransY], src[kMScaleY], src[kMTransX], invDet); |
| |
| dst[kMSkewY] = SkDoubleToScalar(-src[kMSkewY] * invDet); |
| dst[kMScaleY] = SkDoubleToScalar(src[kMScaleX] * invDet); |
| dst[kMTransY] = dcross_dscale(src[kMSkewY], src[kMTransX], src[kMScaleX], src[kMTransY], invDet); |
| |
| dst[kMPersp0] = 0; |
| dst[kMPersp1] = 0; |
| dst[kMPersp2] = 1; |
| } |
| } |
| |
| bool SkMatrix::invertNonIdentity(SkMatrix* inv) const { |
| SkASSERT(!this->isIdentity()); |
| |
| TypeMask mask = this->getType(); |
| |
| if (0 == (mask & ~(kScale_Mask | kTranslate_Mask))) { |
| bool invertible = true; |
| if (inv) { |
| if (mask & kScale_Mask) { |
| SkScalar invX = fMat[kMScaleX]; |
| SkScalar invY = fMat[kMScaleY]; |
| if (0 == invX || 0 == invY) { |
| return false; |
| } |
| invX = SkScalarInvert(invX); |
| invY = SkScalarInvert(invY); |
| |
| // Must be careful when writing to inv, since it may be the |
| // same memory as this. |
| |
| inv->fMat[kMSkewX] = inv->fMat[kMSkewY] = |
| inv->fMat[kMPersp0] = inv->fMat[kMPersp1] = 0; |
| |
| inv->fMat[kMScaleX] = invX; |
| inv->fMat[kMScaleY] = invY; |
| inv->fMat[kMPersp2] = 1; |
| inv->fMat[kMTransX] = -fMat[kMTransX] * invX; |
| inv->fMat[kMTransY] = -fMat[kMTransY] * invY; |
| |
| inv->setTypeMask(mask | kRectStaysRect_Mask); |
| } else { |
| // translate only |
| inv->setTranslate(-fMat[kMTransX], -fMat[kMTransY]); |
| } |
| } else { // inv is nullptr, just check if we're invertible |
| if (!fMat[kMScaleX] || !fMat[kMScaleY]) { |
| invertible = false; |
| } |
| } |
| return invertible; |
| } |
| |
| int isPersp = mask & kPerspective_Mask; |
| double invDet = sk_inv_determinant(fMat, isPersp); |
| |
| if (invDet == 0) { // underflow |
| return false; |
| } |
| |
| bool applyingInPlace = (inv == this); |
| |
| SkMatrix* tmp = inv; |
| |
| SkMatrix storage; |
| if (applyingInPlace || nullptr == tmp) { |
| tmp = &storage; // we either need to avoid trampling memory or have no memory |
| } |
| |
| ComputeInv(tmp->fMat, fMat, invDet, isPersp); |
| if (!tmp->isFinite()) { |
| return false; |
| } |
| |
| tmp->setTypeMask(fTypeMask); |
| |
| if (applyingInPlace) { |
| *inv = storage; // need to copy answer back |
| } |
| |
| return true; |
| } |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| |
| void SkMatrix::Identity_pts(const SkMatrix& m, SkPoint dst[], const SkPoint src[], int count) { |
| SkASSERT(m.getType() == 0); |
| |
| if (dst != src && count > 0) { |
| memcpy(dst, src, count * sizeof(SkPoint)); |
| } |
| } |
| |
| void SkMatrix::Trans_pts(const SkMatrix& m, SkPoint dst[], const SkPoint src[], int count) { |
| SkASSERT(m.getType() <= SkMatrix::kTranslate_Mask); |
| if (count > 0) { |
| SkScalar tx = m.getTranslateX(); |
| SkScalar ty = m.getTranslateY(); |
| if (count & 1) { |
| dst->fX = src->fX + tx; |
| dst->fY = src->fY + ty; |
| src += 1; |
| dst += 1; |
| } |
| Sk4s trans4(tx, ty, tx, ty); |
| count >>= 1; |
| if (count & 1) { |
| (Sk4s::Load(src) + trans4).store(dst); |
| src += 2; |
| dst += 2; |
| } |
| count >>= 1; |
| for (int i = 0; i < count; ++i) { |
| (Sk4s::Load(src+0) + trans4).store(dst+0); |
| (Sk4s::Load(src+2) + trans4).store(dst+2); |
| src += 4; |
| dst += 4; |
| } |
| } |
| } |
| |
| void SkMatrix::Scale_pts(const SkMatrix& m, SkPoint dst[], const SkPoint src[], int count) { |
| SkASSERT(m.getType() <= (SkMatrix::kScale_Mask | SkMatrix::kTranslate_Mask)); |
| if (count > 0) { |
| SkScalar tx = m.getTranslateX(); |
| SkScalar ty = m.getTranslateY(); |
| SkScalar sx = m.getScaleX(); |
| SkScalar sy = m.getScaleY(); |
| if (count & 1) { |
| dst->fX = src->fX * sx + tx; |
| dst->fY = src->fY * sy + ty; |
| src += 1; |
| dst += 1; |
| } |
| Sk4s trans4(tx, ty, tx, ty); |
| Sk4s scale4(sx, sy, sx, sy); |
| count >>= 1; |
| if (count & 1) { |
| (Sk4s::Load(src) * scale4 + trans4).store(dst); |
| src += 2; |
| dst += 2; |
| } |
| count >>= 1; |
| for (int i = 0; i < count; ++i) { |
| (Sk4s::Load(src+0) * scale4 + trans4).store(dst+0); |
| (Sk4s::Load(src+2) * scale4 + trans4).store(dst+2); |
| src += 4; |
| dst += 4; |
| } |
| } |
| } |
| |
| void SkMatrix::Persp_pts(const SkMatrix& m, SkPoint dst[], |
| const SkPoint src[], int count) { |
| SkASSERT(m.hasPerspective()); |
| |
| if (count > 0) { |
| do { |
| SkScalar sy = src->fY; |
| SkScalar sx = src->fX; |
| src += 1; |
| |
| SkScalar x = sdot(sx, m.fMat[kMScaleX], sy, m.fMat[kMSkewX]) + m.fMat[kMTransX]; |
| SkScalar y = sdot(sx, m.fMat[kMSkewY], sy, m.fMat[kMScaleY]) + m.fMat[kMTransY]; |
| #ifdef SK_LEGACY_MATRIX_MATH_ORDER |
| SkScalar z = sx * m.fMat[kMPersp0] + (sy * m.fMat[kMPersp1] + m.fMat[kMPersp2]); |
| #else |
| SkScalar z = sdot(sx, m.fMat[kMPersp0], sy, m.fMat[kMPersp1]) + m.fMat[kMPersp2]; |
| #endif |
| if (z) { |
| z = SkScalarFastInvert(z); |
| } |
| |
| dst->fY = y * z; |
| dst->fX = x * z; |
| dst += 1; |
| } while (--count); |
| } |
| } |
| |
| void SkMatrix::Affine_vpts(const SkMatrix& m, SkPoint dst[], const SkPoint src[], int count) { |
| SkASSERT(m.getType() != SkMatrix::kPerspective_Mask); |
| if (count > 0) { |
| SkScalar tx = m.getTranslateX(); |
| SkScalar ty = m.getTranslateY(); |
| SkScalar sx = m.getScaleX(); |
| SkScalar sy = m.getScaleY(); |
| SkScalar kx = m.getSkewX(); |
| SkScalar ky = m.getSkewY(); |
| if (count & 1) { |
| dst->set(src->fX * sx + src->fY * kx + tx, |
| src->fX * ky + src->fY * sy + ty); |
| src += 1; |
| dst += 1; |
| } |
| Sk4s trans4(tx, ty, tx, ty); |
| Sk4s scale4(sx, sy, sx, sy); |
| Sk4s skew4(kx, ky, kx, ky); // applied to swizzle of src4 |
| count >>= 1; |
| for (int i = 0; i < count; ++i) { |
| Sk4s src4 = Sk4s::Load(src); |
| Sk4s swz4 = SkNx_shuffle<1,0,3,2>(src4); // y0 x0, y1 x1 |
| (src4 * scale4 + swz4 * skew4 + trans4).store(dst); |
| src += 2; |
| dst += 2; |
| } |
| } |
| } |
| |
| const SkMatrix::MapPtsProc SkMatrix::gMapPtsProcs[] = { |
| SkMatrix::Identity_pts, SkMatrix::Trans_pts, |
| SkMatrix::Scale_pts, SkMatrix::Scale_pts, |
| SkMatrix::Affine_vpts, SkMatrix::Affine_vpts, |
| SkMatrix::Affine_vpts, SkMatrix::Affine_vpts, |
| // repeat the persp proc 8 times |
| SkMatrix::Persp_pts, SkMatrix::Persp_pts, |
| SkMatrix::Persp_pts, SkMatrix::Persp_pts, |
| SkMatrix::Persp_pts, SkMatrix::Persp_pts, |
| SkMatrix::Persp_pts, SkMatrix::Persp_pts |
| }; |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| |
| void SkMatrixPriv::MapHomogeneousPointsWithStride(const SkMatrix& mx, SkPoint3 dst[], |
| size_t dstStride, const SkPoint3 src[], |
| size_t srcStride, int count) { |
| SkASSERT((dst && src && count > 0) || 0 == count); |
| // no partial overlap |
| SkASSERT(src == dst || &dst[count] <= &src[0] || &src[count] <= &dst[0]); |
| |
| if (count > 0) { |
| if (mx.isIdentity()) { |
| if (src != dst) { |
| if (srcStride == sizeof(SkPoint3) && dstStride == sizeof(SkPoint3)) { |
| memcpy(dst, src, count * sizeof(SkPoint3)); |
| } else { |
| for (int i = 0; i < count; ++i) { |
| *dst = *src; |
| dst = reinterpret_cast<SkPoint3*>(reinterpret_cast<char*>(dst) + dstStride); |
| src = reinterpret_cast<const SkPoint3*>(reinterpret_cast<const char*>(src) + |
| srcStride); |
| } |
| } |
| } |
| return; |
| } |
| do { |
| SkScalar sx = src->fX; |
| SkScalar sy = src->fY; |
| SkScalar sw = src->fZ; |
| src = reinterpret_cast<const SkPoint3*>(reinterpret_cast<const char*>(src) + srcStride); |
| const SkScalar* mat = mx.fMat; |
| typedef SkMatrix M; |
| SkScalar x = sdot(sx, mat[M::kMScaleX], sy, mat[M::kMSkewX], sw, mat[M::kMTransX]); |
| SkScalar y = sdot(sx, mat[M::kMSkewY], sy, mat[M::kMScaleY], sw, mat[M::kMTransY]); |
| SkScalar w = sdot(sx, mat[M::kMPersp0], sy, mat[M::kMPersp1], sw, mat[M::kMPersp2]); |
| |
| dst->set(x, y, w); |
| dst = reinterpret_cast<SkPoint3*>(reinterpret_cast<char*>(dst) + dstStride); |
| } while (--count); |
| } |
| } |
| |
| void SkMatrix::mapHomogeneousPoints(SkPoint3 dst[], const SkPoint3 src[], int count) const { |
| SkMatrixPriv::MapHomogeneousPointsWithStride(*this, dst, sizeof(SkPoint3), src, |
| sizeof(SkPoint3), count); |
| } |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| |
| void SkMatrix::mapVectors(SkPoint dst[], const SkPoint src[], int count) const { |
| if (this->hasPerspective()) { |
| SkPoint origin; |
| |
| MapXYProc proc = this->getMapXYProc(); |
| proc(*this, 0, 0, &origin); |
| |
| for (int i = count - 1; i >= 0; --i) { |
| SkPoint tmp; |
| |
| proc(*this, src[i].fX, src[i].fY, &tmp); |
| dst[i].set(tmp.fX - origin.fX, tmp.fY - origin.fY); |
| } |
| } else { |
| SkMatrix tmp = *this; |
| |
| tmp.fMat[kMTransX] = tmp.fMat[kMTransY] = 0; |
| tmp.clearTypeMask(kTranslate_Mask); |
| tmp.mapPoints(dst, src, count); |
| } |
| } |
| |
| static Sk4f sort_as_rect(const Sk4f& ltrb) { |
| Sk4f rblt(ltrb[2], ltrb[3], ltrb[0], ltrb[1]); |
| Sk4f min = Sk4f::Min(ltrb, rblt); |
| Sk4f max = Sk4f::Max(ltrb, rblt); |
| // We can extract either pair [0,1] or [2,3] from min and max and be correct, but on |
| // ARM this sequence generates the fastest (a single instruction). |
| return Sk4f(min[2], min[3], max[0], max[1]); |
| } |
| |
| void SkMatrix::mapRectScaleTranslate(SkRect* dst, const SkRect& src) const { |
| SkASSERT(dst); |
| SkASSERT(this->isScaleTranslate()); |
| |
| SkScalar sx = fMat[kMScaleX]; |
| SkScalar sy = fMat[kMScaleY]; |
| SkScalar tx = fMat[kMTransX]; |
| SkScalar ty = fMat[kMTransY]; |
| Sk4f scale(sx, sy, sx, sy); |
| Sk4f trans(tx, ty, tx, ty); |
| sort_as_rect(Sk4f::Load(&src.fLeft) * scale + trans).store(&dst->fLeft); |
| } |
| |
| bool SkMatrix::mapRect(SkRect* dst, const SkRect& src) const { |
| SkASSERT(dst); |
| |
| if (this->getType() <= kTranslate_Mask) { |
| SkScalar tx = fMat[kMTransX]; |
| SkScalar ty = fMat[kMTransY]; |
| Sk4f trans(tx, ty, tx, ty); |
| sort_as_rect(Sk4f::Load(&src.fLeft) + trans).store(&dst->fLeft); |
| return true; |
| } |
| if (this->isScaleTranslate()) { |
| this->mapRectScaleTranslate(dst, src); |
| return true; |
| } else { |
| SkPoint quad[4]; |
| |
| src.toQuad(quad); |
| this->mapPoints(quad, quad, 4); |
| dst->set(quad, 4); |
| return this->rectStaysRect(); // might still return true if rotated by 90, etc. |
| } |
| } |
| |
| SkScalar SkMatrix::mapRadius(SkScalar radius) const { |
| SkVector vec[2]; |
| |
| vec[0].set(radius, 0); |
| vec[1].set(0, radius); |
| this->mapVectors(vec, 2); |
| |
| SkScalar d0 = vec[0].length(); |
| SkScalar d1 = vec[1].length(); |
| |
| // return geometric mean |
| return SkScalarSqrt(d0 * d1); |
| } |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| |
| void SkMatrix::Persp_xy(const SkMatrix& m, SkScalar sx, SkScalar sy, |
| SkPoint* pt) { |
| SkASSERT(m.hasPerspective()); |
| |
| SkScalar x = sdot(sx, m.fMat[kMScaleX], sy, m.fMat[kMSkewX]) + m.fMat[kMTransX]; |
| SkScalar y = sdot(sx, m.fMat[kMSkewY], sy, m.fMat[kMScaleY]) + m.fMat[kMTransY]; |
| SkScalar z = sdot(sx, m.fMat[kMPersp0], sy, m.fMat[kMPersp1]) + m.fMat[kMPersp2]; |
| if (z) { |
| z = SkScalarFastInvert(z); |
| } |
| pt->fX = x * z; |
| pt->fY = y * z; |
| } |
| |
| void SkMatrix::RotTrans_xy(const SkMatrix& m, SkScalar sx, SkScalar sy, |
| SkPoint* pt) { |
| SkASSERT((m.getType() & (kAffine_Mask | kPerspective_Mask)) == kAffine_Mask); |
| |
| #ifdef SK_LEGACY_MATRIX_MATH_ORDER |
| pt->fX = sx * m.fMat[kMScaleX] + (sy * m.fMat[kMSkewX] + m.fMat[kMTransX]); |
| pt->fY = sx * m.fMat[kMSkewY] + (sy * m.fMat[kMScaleY] + m.fMat[kMTransY]); |
| #else |
| pt->fX = sdot(sx, m.fMat[kMScaleX], sy, m.fMat[kMSkewX]) + m.fMat[kMTransX]; |
| pt->fY = sdot(sx, m.fMat[kMSkewY], sy, m.fMat[kMScaleY]) + m.fMat[kMTransY]; |
| #endif |
| } |
| |
| void SkMatrix::Rot_xy(const SkMatrix& m, SkScalar sx, SkScalar sy, |
| SkPoint* pt) { |
| SkASSERT((m.getType() & (kAffine_Mask | kPerspective_Mask))== kAffine_Mask); |
| SkASSERT(0 == m.fMat[kMTransX]); |
| SkASSERT(0 == m.fMat[kMTransY]); |
| |
| #ifdef SK_LEGACY_MATRIX_MATH_ORDER |
| pt->fX = sx * m.fMat[kMScaleX] + (sy * m.fMat[kMSkewX] + m.fMat[kMTransX]); |
| pt->fY = sx * m.fMat[kMSkewY] + (sy * m.fMat[kMScaleY] + m.fMat[kMTransY]); |
| #else |
| pt->fX = sdot(sx, m.fMat[kMScaleX], sy, m.fMat[kMSkewX]) + m.fMat[kMTransX]; |
| pt->fY = sdot(sx, m.fMat[kMSkewY], sy, m.fMat[kMScaleY]) + m.fMat[kMTransY]; |
| #endif |
| } |
| |
| void SkMatrix::ScaleTrans_xy(const SkMatrix& m, SkScalar sx, SkScalar sy, |
| SkPoint* pt) { |
| SkASSERT((m.getType() & (kScale_Mask | kAffine_Mask | kPerspective_Mask)) |
| == kScale_Mask); |
| |
| pt->fX = sx * m.fMat[kMScaleX] + m.fMat[kMTransX]; |
| pt->fY = sy * m.fMat[kMScaleY] + m.fMat[kMTransY]; |
| } |
| |
| void SkMatrix::Scale_xy(const SkMatrix& m, SkScalar sx, SkScalar sy, |
| SkPoint* pt) { |
| SkASSERT((m.getType() & (kScale_Mask | kAffine_Mask | kPerspective_Mask)) |
| == kScale_Mask); |
| SkASSERT(0 == m.fMat[kMTransX]); |
| SkASSERT(0 == m.fMat[kMTransY]); |
| |
| pt->fX = sx * m.fMat[kMScaleX]; |
| pt->fY = sy * m.fMat[kMScaleY]; |
| } |
| |
| void SkMatrix::Trans_xy(const SkMatrix& m, SkScalar sx, SkScalar sy, |
| SkPoint* pt) { |
| SkASSERT(m.getType() == kTranslate_Mask); |
| |
| pt->fX = sx + m.fMat[kMTransX]; |
| pt->fY = sy + m.fMat[kMTransY]; |
| } |
| |
| void SkMatrix::Identity_xy(const SkMatrix& m, SkScalar sx, SkScalar sy, |
| SkPoint* pt) { |
| SkASSERT(0 == m.getType()); |
| |
| pt->fX = sx; |
| pt->fY = sy; |
| } |
| |
| const SkMatrix::MapXYProc SkMatrix::gMapXYProcs[] = { |
| SkMatrix::Identity_xy, SkMatrix::Trans_xy, |
| SkMatrix::Scale_xy, SkMatrix::ScaleTrans_xy, |
| SkMatrix::Rot_xy, SkMatrix::RotTrans_xy, |
| SkMatrix::Rot_xy, SkMatrix::RotTrans_xy, |
| // repeat the persp proc 8 times |
| SkMatrix::Persp_xy, SkMatrix::Persp_xy, |
| SkMatrix::Persp_xy, SkMatrix::Persp_xy, |
| SkMatrix::Persp_xy, SkMatrix::Persp_xy, |
| SkMatrix::Persp_xy, SkMatrix::Persp_xy |
| }; |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| |
| // if its nearly zero (just made up 26, perhaps it should be bigger or smaller) |
| #define PerspNearlyZero(x) SkScalarNearlyZero(x, (1.0f / (1 << 26))) |
| |
| bool SkMatrix::isFixedStepInX() const { |
| return PerspNearlyZero(fMat[kMPersp0]); |
| } |
| |
| SkVector SkMatrix::fixedStepInX(SkScalar y) const { |
| SkASSERT(PerspNearlyZero(fMat[kMPersp0])); |
| if (PerspNearlyZero(fMat[kMPersp1]) && |
| PerspNearlyZero(fMat[kMPersp2] - 1)) { |
| return SkVector::Make(fMat[kMScaleX], fMat[kMSkewY]); |
| } else { |
| SkScalar z = y * fMat[kMPersp1] + fMat[kMPersp2]; |
| return SkVector::Make(fMat[kMScaleX] / z, fMat[kMSkewY] / z); |
| } |
| } |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| |
| static inline bool checkForZero(float x) { |
| return x*x == 0; |
| } |
| |
| static inline bool poly_to_point(SkPoint* pt, const SkPoint poly[], int count) { |
| float x = 1, y = 1; |
| SkPoint pt1, pt2; |
| |
| if (count > 1) { |
| pt1.fX = poly[1].fX - poly[0].fX; |
| pt1.fY = poly[1].fY - poly[0].fY; |
| y = SkPoint::Length(pt1.fX, pt1.fY); |
| if (checkForZero(y)) { |
| return false; |
| } |
| switch (count) { |
| case 2: |
| break; |
| case 3: |
| pt2.fX = poly[0].fY - poly[2].fY; |
| pt2.fY = poly[2].fX - poly[0].fX; |
| goto CALC_X; |
| default: |
| pt2.fX = poly[0].fY - poly[3].fY; |
| pt2.fY = poly[3].fX - poly[0].fX; |
| CALC_X: |
| x = sdot(pt1.fX, pt2.fX, pt1.fY, pt2.fY) / y; |
| break; |
| } |
| } |
| pt->set(x, y); |
| return true; |
| } |
| |
| bool SkMatrix::Poly2Proc(const SkPoint srcPt[], SkMatrix* dst, |
| const SkPoint& scale) { |
| float invScale = 1 / scale.fY; |
| |
| dst->fMat[kMScaleX] = (srcPt[1].fY - srcPt[0].fY) * invScale; |
| dst->fMat[kMSkewY] = (srcPt[0].fX - srcPt[1].fX) * invScale; |
| dst->fMat[kMPersp0] = 0; |
| dst->fMat[kMSkewX] = (srcPt[1].fX - srcPt[0].fX) * invScale; |
| dst->fMat[kMScaleY] = (srcPt[1].fY - srcPt[0].fY) * invScale; |
| dst->fMat[kMPersp1] = 0; |
| dst->fMat[kMTransX] = srcPt[0].fX; |
| dst->fMat[kMTransY] = srcPt[0].fY; |
| dst->fMat[kMPersp2] = 1; |
| dst->setTypeMask(kUnknown_Mask); |
| return true; |
| } |
| |
| bool SkMatrix::Poly3Proc(const SkPoint srcPt[], SkMatrix* dst, |
| const SkPoint& scale) { |
| float invScale = 1 / scale.fX; |
| dst->fMat[kMScaleX] = (srcPt[2].fX - srcPt[0].fX) * invScale; |
| dst->fMat[kMSkewY] = (srcPt[2].fY - srcPt[0].fY) * invScale; |
| dst->fMat[kMPersp0] = 0; |
| |
| invScale = 1 / scale.fY; |
| dst->fMat[kMSkewX] = (srcPt[1].fX - srcPt[0].fX) * invScale; |
| dst->fMat[kMScaleY] = (srcPt[1].fY - srcPt[0].fY) * invScale; |
| dst->fMat[kMPersp1] = 0; |
| |
| dst->fMat[kMTransX] = srcPt[0].fX; |
| dst->fMat[kMTransY] = srcPt[0].fY; |
| dst->fMat[kMPersp2] = 1; |
| dst->setTypeMask(kUnknown_Mask); |
| return true; |
| } |
| |
| bool SkMatrix::Poly4Proc(const SkPoint srcPt[], SkMatrix* dst, |
| const SkPoint& scale) { |
| float a1, a2; |
| float x0, y0, x1, y1, x2, y2; |
| |
| x0 = srcPt[2].fX - srcPt[0].fX; |
| y0 = srcPt[2].fY - srcPt[0].fY; |
| x1 = srcPt[2].fX - srcPt[1].fX; |
| y1 = srcPt[2].fY - srcPt[1].fY; |
| x2 = srcPt[2].fX - srcPt[3].fX; |
| y2 = srcPt[2].fY - srcPt[3].fY; |
| |
| /* check if abs(x2) > abs(y2) */ |
| if ( x2 > 0 ? y2 > 0 ? x2 > y2 : x2 > -y2 : y2 > 0 ? -x2 > y2 : x2 < y2) { |
| float denom = (x1 * y2 / x2) - y1; |
| if (checkForZero(denom)) { |
| return false; |
| } |
| a1 = (((x0 - x1) * y2 / x2) - y0 + y1) / denom; |
| } else { |
| float denom = x1 - (y1 * x2 / y2); |
| if (checkForZero(denom)) { |
| return false; |
| } |
| a1 = (x0 - x1 - ((y0 - y1) * x2 / y2)) / denom; |
| } |
| |
| /* check if abs(x1) > abs(y1) */ |
| if ( x1 > 0 ? y1 > 0 ? x1 > y1 : x1 > -y1 : y1 > 0 ? -x1 > y1 : x1 < y1) { |
| float denom = y2 - (x2 * y1 / x1); |
| if (checkForZero(denom)) { |
| return false; |
| } |
| a2 = (y0 - y2 - ((x0 - x2) * y1 / x1)) / denom; |
| } else { |
| float denom = (y2 * x1 / y1) - x2; |
| if (checkForZero(denom)) { |
| return false; |
| } |
| a2 = (((y0 - y2) * x1 / y1) - x0 + x2) / denom; |
| } |
| |
| float invScale = SkScalarInvert(scale.fX); |
| dst->fMat[kMScaleX] = (a2 * srcPt[3].fX + srcPt[3].fX - srcPt[0].fX) * invScale; |
| dst->fMat[kMSkewY] = (a2 * srcPt[3].fY + srcPt[3].fY - srcPt[0].fY) * invScale; |
| dst->fMat[kMPersp0] = a2 * invScale; |
| |
| invScale = SkScalarInvert(scale.fY); |
| dst->fMat[kMSkewX] = (a1 * srcPt[1].fX + srcPt[1].fX - srcPt[0].fX) * invScale; |
| dst->fMat[kMScaleY] = (a1 * srcPt[1].fY + srcPt[1].fY - srcPt[0].fY) * invScale; |
| dst->fMat[kMPersp1] = a1 * invScale; |
| |
| dst->fMat[kMTransX] = srcPt[0].fX; |
| dst->fMat[kMTransY] = srcPt[0].fY; |
| dst->fMat[kMPersp2] = 1; |
| dst->setTypeMask(kUnknown_Mask); |
| return true; |
| } |
| |
| typedef bool (*PolyMapProc)(const SkPoint[], SkMatrix*, const SkPoint&); |
| |
| /* Taken from Rob Johnson's original sample code in QuickDraw GX |
| */ |
| bool SkMatrix::setPolyToPoly(const SkPoint src[], const SkPoint dst[], |
| int count) { |
| if ((unsigned)count > 4) { |
| SkDebugf("--- SkMatrix::setPolyToPoly count out of range %d\n", count); |
| return false; |
| } |
| |
| if (0 == count) { |
| this->reset(); |
| return true; |
| } |
| if (1 == count) { |
| this->setTranslate(dst[0].fX - src[0].fX, dst[0].fY - src[0].fY); |
| return true; |
| } |
| |
| SkPoint scale; |
| if (!poly_to_point(&scale, src, count) || |
| SkScalarNearlyZero(scale.fX) || |
| SkScalarNearlyZero(scale.fY)) { |
| return false; |
| } |
| |
| static const PolyMapProc gPolyMapProcs[] = { |
| SkMatrix::Poly2Proc, SkMatrix::Poly3Proc, SkMatrix::Poly4Proc |
| }; |
| PolyMapProc proc = gPolyMapProcs[count - 2]; |
| |
| SkMatrix tempMap, result; |
| tempMap.setTypeMask(kUnknown_Mask); |
| |
| if (!proc(src, &tempMap, scale)) { |
| return false; |
| } |
| if (!tempMap.invert(&result)) { |
| return false; |
| } |
| if (!proc(dst, &tempMap, scale)) { |
| return false; |
| } |
| this->setConcat(tempMap, result); |
| return true; |
| } |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| |
| enum MinMaxOrBoth { |
| kMin_MinMaxOrBoth, |
| kMax_MinMaxOrBoth, |
| kBoth_MinMaxOrBoth |
| }; |
| |
| template <MinMaxOrBoth MIN_MAX_OR_BOTH> bool get_scale_factor(SkMatrix::TypeMask typeMask, |
| const SkScalar m[9], |
| SkScalar results[/*1 or 2*/]) { |
| if (typeMask & SkMatrix::kPerspective_Mask) { |
| return false; |
| } |
| if (SkMatrix::kIdentity_Mask == typeMask) { |
| results[0] = SK_Scalar1; |
| if (kBoth_MinMaxOrBoth == MIN_MAX_OR_BOTH) { |
| results[1] = SK_Scalar1; |
| } |
| return true; |
| } |
| if (!(typeMask & SkMatrix::kAffine_Mask)) { |
| if (kMin_MinMaxOrBoth == MIN_MAX_OR_BOTH) { |
| results[0] = SkMinScalar(SkScalarAbs(m[SkMatrix::kMScaleX]), |
| SkScalarAbs(m[SkMatrix::kMScaleY])); |
| } else if (kMax_MinMaxOrBoth == MIN_MAX_OR_BOTH) { |
| results[0] = SkMaxScalar(SkScalarAbs(m[SkMatrix::kMScaleX]), |
| SkScalarAbs(m[SkMatrix::kMScaleY])); |
| } else { |
| results[0] = SkScalarAbs(m[SkMatrix::kMScaleX]); |
| results[1] = SkScalarAbs(m[SkMatrix::kMScaleY]); |
| if (results[0] > results[1]) { |
| SkTSwap(results[0], results[1]); |
| } |
| } |
| return true; |
| } |
| // ignore the translation part of the matrix, just look at 2x2 portion. |
| // compute singular values, take largest or smallest abs value. |
| // [a b; b c] = A^T*A |
| SkScalar a = sdot(m[SkMatrix::kMScaleX], m[SkMatrix::kMScaleX], |
| m[SkMatrix::kMSkewY], m[SkMatrix::kMSkewY]); |
| SkScalar b = sdot(m[SkMatrix::kMScaleX], m[SkMatrix::kMSkewX], |
| m[SkMatrix::kMScaleY], m[SkMatrix::kMSkewY]); |
| SkScalar c = sdot(m[SkMatrix::kMSkewX], m[SkMatrix::kMSkewX], |
| m[SkMatrix::kMScaleY], m[SkMatrix::kMScaleY]); |
| // eigenvalues of A^T*A are the squared singular values of A. |
| // characteristic equation is det((A^T*A) - l*I) = 0 |
| // l^2 - (a + c)l + (ac-b^2) |
| // solve using quadratic equation (divisor is non-zero since l^2 has 1 coeff |
| // and roots are guaranteed to be pos and real). |
| SkScalar bSqd = b * b; |
| // if upper left 2x2 is orthogonal save some math |
| if (bSqd <= SK_ScalarNearlyZero*SK_ScalarNearlyZero) { |
| if (kMin_MinMaxOrBoth == MIN_MAX_OR_BOTH) { |
| results[0] = SkMinScalar(a, c); |
| } else if (kMax_MinMaxOrBoth == MIN_MAX_OR_BOTH) { |
| results[0] = SkMaxScalar(a, c); |
| } else { |
| results[0] = a; |
| results[1] = c; |
| if (results[0] > results[1]) { |
| SkTSwap(results[0], results[1]); |
| } |
| } |
| } else { |
| SkScalar aminusc = a - c; |
| SkScalar apluscdiv2 = SkScalarHalf(a + c); |
| SkScalar x = SkScalarHalf(SkScalarSqrt(aminusc * aminusc + 4 * bSqd)); |
| if (kMin_MinMaxOrBoth == MIN_MAX_OR_BOTH) { |
| results[0] = apluscdiv2 - x; |
| } else if (kMax_MinMaxOrBoth == MIN_MAX_OR_BOTH) { |
| results[0] = apluscdiv2 + x; |
| } else { |
| results[0] = apluscdiv2 - x; |
| results[1] = apluscdiv2 + x; |
| } |
| } |
| if (!SkScalarIsFinite(results[0])) { |
| return false; |
| } |
| // Due to the floating point inaccuracy, there might be an error in a, b, c |
| // calculated by sdot, further deepened by subsequent arithmetic operations |
| // on them. Therefore, we allow and cap the nearly-zero negative values. |
| SkASSERT(results[0] >= -SK_ScalarNearlyZero); |
| if (results[0] < 0) { |
| results[0] = 0; |
| } |
| results[0] = SkScalarSqrt(results[0]); |
| if (kBoth_MinMaxOrBoth == MIN_MAX_OR_BOTH) { |
| if (!SkScalarIsFinite(results[1])) { |
| return false; |
| } |
| SkASSERT(results[1] >= -SK_ScalarNearlyZero); |
| if (results[1] < 0) { |
| results[1] = 0; |
| } |
| results[1] = SkScalarSqrt(results[1]); |
| } |
| return true; |
| } |
| |
| SkScalar SkMatrix::getMinScale() const { |
| SkScalar factor; |
| if (get_scale_factor<kMin_MinMaxOrBoth>(this->getType(), fMat, &factor)) { |
| return factor; |
| } else { |
| return -1; |
| } |
| } |
| |
| SkScalar SkMatrix::getMaxScale() const { |
| SkScalar factor; |
| if (get_scale_factor<kMax_MinMaxOrBoth>(this->getType(), fMat, &factor)) { |
| return factor; |
| } else { |
| return -1; |
| } |
| } |
| |
| bool SkMatrix::getMinMaxScales(SkScalar scaleFactors[2]) const { |
| return get_scale_factor<kBoth_MinMaxOrBoth>(this->getType(), fMat, scaleFactors); |
| } |
| |
| namespace { |
| |
| // SkMatrix is C++11 POD (trivial and standard-layout), but not aggregate (it has private fields). |
| struct AggregateMatrix { |
| SkScalar matrix[9]; |
| uint32_t typemask; |
| |
| const SkMatrix& asSkMatrix() const { return *reinterpret_cast<const SkMatrix*>(this); } |
| }; |
| static_assert(sizeof(AggregateMatrix) == sizeof(SkMatrix), "AggregateMatrix size mismatch."); |
| |
| } // namespace |
| |
| const SkMatrix& SkMatrix::I() { |
| static_assert(offsetof(SkMatrix,fMat) == offsetof(AggregateMatrix,matrix), "fMat"); |
| static_assert(offsetof(SkMatrix,fTypeMask) == offsetof(AggregateMatrix,typemask), "fTypeMask"); |
| |
| static const AggregateMatrix identity = { {SK_Scalar1, 0, 0, |
| 0, SK_Scalar1, 0, |
| 0, 0, SK_Scalar1 }, |
| kIdentity_Mask | kRectStaysRect_Mask}; |
| SkASSERT(identity.asSkMatrix().isIdentity()); |
| return identity.asSkMatrix(); |
| } |
| |
| const SkMatrix& SkMatrix::InvalidMatrix() { |
| static_assert(offsetof(SkMatrix,fMat) == offsetof(AggregateMatrix,matrix), "fMat"); |
| static_assert(offsetof(SkMatrix,fTypeMask) == offsetof(AggregateMatrix,typemask), "fTypeMask"); |
| |
| static const AggregateMatrix invalid = |
| { {SK_ScalarMax, SK_ScalarMax, SK_ScalarMax, |
| SK_ScalarMax, SK_ScalarMax, SK_ScalarMax, |
| SK_ScalarMax, SK_ScalarMax, SK_ScalarMax }, |
| kTranslate_Mask | kScale_Mask | kAffine_Mask | kPerspective_Mask }; |
| return invalid.asSkMatrix(); |
| } |
| |
| bool SkMatrix::decomposeScale(SkSize* scale, SkMatrix* remaining) const { |
| if (this->hasPerspective()) { |
| return false; |
| } |
| |
| const SkScalar sx = SkVector::Length(this->getScaleX(), this->getSkewY()); |
| const SkScalar sy = SkVector::Length(this->getSkewX(), this->getScaleY()); |
| if (!SkScalarIsFinite(sx) || !SkScalarIsFinite(sy) || |
| SkScalarNearlyZero(sx) || SkScalarNearlyZero(sy)) { |
| return false; |
| } |
| |
| if (scale) { |
| scale->set(sx, sy); |
| } |
| if (remaining) { |
| *remaining = *this; |
| remaining->postScale(SkScalarInvert(sx), SkScalarInvert(sy)); |
| } |
| return true; |
| } |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| |
| size_t SkMatrix::writeToMemory(void* buffer) const { |
| // TODO write less for simple matrices |
| static const size_t sizeInMemory = 9 * sizeof(SkScalar); |
| if (buffer) { |
| memcpy(buffer, fMat, sizeInMemory); |
| } |
| return sizeInMemory; |
| } |
| |
| size_t SkMatrix::readFromMemory(const void* buffer, size_t length) { |
| static const size_t sizeInMemory = 9 * sizeof(SkScalar); |
| if (length < sizeInMemory) { |
| return 0; |
| } |
| memcpy(fMat, buffer, sizeInMemory); |
| this->setTypeMask(kUnknown_Mask); |
| return sizeInMemory; |
| } |
| |
| void SkMatrix::dump() const { |
| SkString str; |
| this->toString(&str); |
| SkDebugf("%s\n", str.c_str()); |
| } |
| |
| void SkMatrix::toString(SkString* str) const { |
| str->appendf("[%8.4f %8.4f %8.4f][%8.4f %8.4f %8.4f][%8.4f %8.4f %8.4f]", |
| fMat[0], fMat[1], fMat[2], fMat[3], fMat[4], fMat[5], |
| fMat[6], fMat[7], fMat[8]); |
| } |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| |
| #include "SkMatrixUtils.h" |
| |
| bool SkTreatAsSprite(const SkMatrix& mat, const SkISize& size, const SkPaint& paint) { |
| // Our path aa is 2-bits, and our rect aa is 8, so we could use 8, |
| // but in practice 4 seems enough (still looks smooth) and allows |
| // more slightly fractional cases to fall into the fast (sprite) case. |
| static const unsigned kAntiAliasSubpixelBits = 4; |
| |
| const unsigned subpixelBits = paint.isAntiAlias() ? kAntiAliasSubpixelBits : 0; |
| |
| // quick reject on affine or perspective |
| if (mat.getType() & ~(SkMatrix::kScale_Mask | SkMatrix::kTranslate_Mask)) { |
| return false; |
| } |
| |
| // quick success check |
| if (!subpixelBits && !(mat.getType() & ~SkMatrix::kTranslate_Mask)) { |
| return true; |
| } |
| |
| // mapRect supports negative scales, so we eliminate those first |
| if (mat.getScaleX() < 0 || mat.getScaleY() < 0) { |
| return false; |
| } |
| |
| SkRect dst; |
| SkIRect isrc = SkIRect::MakeSize(size); |
| |
| { |
| SkRect src; |
| src.set(isrc); |
| mat.mapRect(&dst, src); |
| } |
| |
| // just apply the translate to isrc |
| isrc.offset(SkScalarRoundToInt(mat.getTranslateX()), |
| SkScalarRoundToInt(mat.getTranslateY())); |
| |
| if (subpixelBits) { |
| isrc.fLeft = SkLeftShift(isrc.fLeft, subpixelBits); |
| isrc.fTop = SkLeftShift(isrc.fTop, subpixelBits); |
| isrc.fRight = SkLeftShift(isrc.fRight, subpixelBits); |
| isrc.fBottom = SkLeftShift(isrc.fBottom, subpixelBits); |
| |
| const float scale = 1 << subpixelBits; |
| dst.fLeft *= scale; |
| dst.fTop *= scale; |
| dst.fRight *= scale; |
| dst.fBottom *= scale; |
| } |
| |
| SkIRect idst; |
| dst.round(&idst); |
| return isrc == idst; |
| } |
| |
| // A square matrix M can be decomposed (via polar decomposition) into two matrices -- |
| // an orthogonal matrix Q and a symmetric matrix S. In turn we can decompose S into U*W*U^T, |
| // where U is another orthogonal matrix and W is a scale matrix. These can be recombined |
| // to give M = (Q*U)*W*U^T, i.e., the product of two orthogonal matrices and a scale matrix. |
| // |
| // The one wrinkle is that traditionally Q may contain a reflection -- the |
| // calculation has been rejiggered to put that reflection into W. |
| bool SkDecomposeUpper2x2(const SkMatrix& matrix, |
| SkPoint* rotation1, |
| SkPoint* scale, |
| SkPoint* rotation2) { |
| |
| SkScalar A = matrix[SkMatrix::kMScaleX]; |
| SkScalar B = matrix[SkMatrix::kMSkewX]; |
| SkScalar C = matrix[SkMatrix::kMSkewY]; |
| SkScalar D = matrix[SkMatrix::kMScaleY]; |
| |
| if (is_degenerate_2x2(A, B, C, D)) { |
| return false; |
| } |
| |
| double w1, w2; |
| SkScalar cos1, sin1; |
| SkScalar cos2, sin2; |
| |
| // do polar decomposition (M = Q*S) |
| SkScalar cosQ, sinQ; |
| double Sa, Sb, Sd; |
| // if M is already symmetric (i.e., M = I*S) |
| if (SkScalarNearlyEqual(B, C)) { |
| cosQ = 1; |
| sinQ = 0; |
| |
| Sa = A; |
| Sb = B; |
| Sd = D; |
| } else { |
| cosQ = A + D; |
| sinQ = C - B; |
| SkScalar reciplen = SkScalarInvert(SkScalarSqrt(cosQ*cosQ + sinQ*sinQ)); |
| cosQ *= reciplen; |
| sinQ *= reciplen; |
| |
| // S = Q^-1*M |
| // we don't calc Sc since it's symmetric |
| Sa = A*cosQ + C*sinQ; |
| Sb = B*cosQ + D*sinQ; |
| Sd = -B*sinQ + D*cosQ; |
| } |
| |
| // Now we need to compute eigenvalues of S (our scale factors) |
| // and eigenvectors (bases for our rotation) |
| // From this, should be able to reconstruct S as U*W*U^T |
| if (SkScalarNearlyZero(SkDoubleToScalar(Sb))) { |
| // already diagonalized |
| cos1 = 1; |
| sin1 = 0; |
| w1 = Sa; |
| w2 = Sd; |
| cos2 = cosQ; |
| sin2 = sinQ; |
| } else { |
| double diff = Sa - Sd; |
| double discriminant = sqrt(diff*diff + 4.0*Sb*Sb); |
| double trace = Sa + Sd; |
| if (diff > 0) { |
| w1 = 0.5*(trace + discriminant); |
| w2 = 0.5*(trace - discriminant); |
| } else { |
| w1 = 0.5*(trace - discriminant); |
| w2 = 0.5*(trace + discriminant); |
| } |
| |
| cos1 = SkDoubleToScalar(Sb); sin1 = SkDoubleToScalar(w1 - Sa); |
| SkScalar reciplen = SkScalarInvert(SkScalarSqrt(cos1*cos1 + sin1*sin1)); |
| cos1 *= reciplen; |
| sin1 *= reciplen; |
| |
| // rotation 2 is composition of Q and U |
| cos2 = cos1*cosQ - sin1*sinQ; |
| sin2 = sin1*cosQ + cos1*sinQ; |
| |
| // rotation 1 is U^T |
| sin1 = -sin1; |
| } |
| |
| if (scale) { |
| scale->fX = SkDoubleToScalar(w1); |
| scale->fY = SkDoubleToScalar(w2); |
| } |
| if (rotation1) { |
| rotation1->fX = cos1; |
| rotation1->fY = sin1; |
| } |
| if (rotation2) { |
| rotation2->fX = cos2; |
| rotation2->fY = sin2; |
| } |
| |
| return true; |
| } |
| |
| ////////////////////////////////////////////////////////////////////////////////////////////////// |
| |
| void SkRSXform::toQuad(SkScalar width, SkScalar height, SkPoint quad[4]) const { |
| #if 0 |
| // This is the slow way, but it documents what we're doing |
| quad[0].set(0, 0); |
| quad[1].set(width, 0); |
| quad[2].set(width, height); |
| quad[3].set(0, height); |
| SkMatrix m; |
| m.setRSXform(*this).mapPoints(quad, quad, 4); |
| #else |
| const SkScalar m00 = fSCos; |
| const SkScalar m01 = -fSSin; |
| const SkScalar m02 = fTx; |
| const SkScalar m10 = -m01; |
| const SkScalar m11 = m00; |
| const SkScalar m12 = fTy; |
| |
| quad[0].set(m02, m12); |
| quad[1].set(m00 * width + m02, m10 * width + m12); |
| quad[2].set(m00 * width + m01 * height + m02, m10 * width + m11 * height + m12); |
| quad[3].set(m01 * height + m02, m11 * height + m12); |
| #endif |
| } |
| |
| void SkRSXform::toTriStrip(SkScalar width, SkScalar height, SkPoint strip[4]) const { |
| const SkScalar m00 = fSCos; |
| const SkScalar m01 = -fSSin; |
| const SkScalar m02 = fTx; |
| const SkScalar m10 = -m01; |
| const SkScalar m11 = m00; |
| const SkScalar m12 = fTy; |
| |
| strip[0].set(m02, m12); |
| strip[1].set(m01 * height + m02, m11 * height + m12); |
| strip[2].set(m00 * width + m02, m10 * width + m12); |
| strip[3].set(m00 * width + m01 * height + m02, m10 * width + m11 * height + m12); |
| } |