| #!/bin/sh |
| # Exhaust(ive, ing) (Mean, Multi) (Test, Trouble) |
| # Copyright (c) 2002-2011 IBM All Rights Reserved |
| |
| # Builds ICU a whole lotta times and with different options |
| # Set the options below and execute this script with the shell. |
| |
| # This script is checked into tools/trunk/release/c. It assumes that the |
| # icu directory is at the same level as the tools directory. If this |
| # is not the case, use the uconfigtest.local file to set the |
| # SRC_DIR variable to point at the ICU source directory. |
| # Or, alternatively, you can make a symlink tools/icu -> your_icu_dir |
| # You can also use the uconfigtest.local file to override the BUILD_DIR |
| # and ICUPLATFORM variables. |
| |
| # It can be handy to run 'tail -F uconfigtest/stats' in another window to see where things are. |
| |
| |
| #------------------- Find full path names ----------------------- |
| JOPT=-j2 |
| |
| # check for uconfigtest.local |
| if [ -f ./uconfigtest.local ] |
| then |
| . ./uconfigtest.local |
| fi |
| |
| # location of this script |
| S=$(pwd) |
| |
| # Build root - tools/release/c/uconfigtest |
| BUILD_DIR=${BUILD_DIR:-${S}/uconfigtest} |
| |
| FAILS=${BUILD_DIR}/fails |
| STATS=${BUILD_DIR}/stats |
| |
| >${FAILS} |
| >${STATS} |
| echo >> ${STATS} |
| echo >> ${STATS} |
| |
| # the runConfigureICU platform name |
| ICUPLATFORM=${ICUPLATFORM:-Linux} |
| |
| # Global Config options to use |
| #export COPTS=" --with-data-packaging=archive" |
| export COPTS= |
| |
| # Global testing options to use |
| export INTLTESTOPTS=-w |
| export CINTLTEST_OPTS=-w |
| # --- Probably will not need to modify the following variables --- |
| |
| # ICU directory is $S/../../../icu |
| ICU=$(dirname $(dirname $(dirname ${S})))/icu |
| |
| # Source directory |
| SRC_DIR=${SRC_DIR:-${ICU}/source} |
| |
| # ------------ End of config variables |
| UCONFIG_H=$SRC_DIR/common/unicode/uconfig.h |
| UCONFIG_LOCAL_H=uconfig_local.h |
| UCONFIG_USE_LOCAL=UCONFIG_USE_LOCAL |
| # Prepare uconfig.h |
| if grep -q ${UCONFIG_LOCAL_H} $UCONFIG_H ; |
| then |
| echo "# $UCONFIG_H already contains our patch, no change" |
| else |
| mv $UCONFIG_H ${UCONFIG_H}.orig |
| cat > $UCONFIG_H <<EOF |
| #if defined(${UCONFIG_USE_LOCAL}) |
| #include ${UCONFIG_LOCAL_H}" |
| #endif |
| /* for uconfigtest.sh - you may REMOVE above this line */ |
| /* ----------------------------------------------------------- */ |
| EOF |
| cat ${UCONFIG_H}.orig >> ${UCONFIG_H} |
| echo "# $UCONFIG_H updated" |
| fi |
| |
| |
| # Start, set a default name to start with in case something goes wrong |
| |
| export NAME=foo |
| mkdir -p ${BUILD_DIR} ${BUILD_DIR}/times 2>/dev/null |
| |
| # Banner function - print a separator to split the output |
| ban() |
| { |
| echo |
| echo |
| echo "#- -----------------------$NAME------------- -#" |
| echo |
| echo "CPPFLAGS = $CPPFLAGS" |
| echo "UCONFIGS = $UCONFIGS" |
| echo |
| echo " build to ${BUILD_DIR}/${NAME} and install in ${BUILD_DIR}/I${NAME} " |
| echo |
| |
| echo "${NAME} ---------------------------------------" >> ${STATS} |
| } |
| |
| # Clean up the old tree before building again |
| clean() |
| { |
| stats clean |
| echo cleaning ${BUILD_DIR}/${NAME} and ${BUILD_DIR}/I${NAME} |
| rm -rf ${BUILD_DIR}/I${NAME} ${BUILD_DIR}/${NAME} |
| mkdir -p ${BUILD_DIR}/${NAME} |
| } |
| |
| # Run configure with the appropriate options (out of source build) |
| config() |
| { |
| stats config |
| mkdir -p ${BUILD_DIR}/${NAME} 2>/dev/null |
| cd ${BUILD_DIR}/${NAME} |
| mkdir emtinc 2>/dev/null |
| |
| # myconfig.h |
| cat > emtinc/${UCONFIG_LOCAL_H} <<EOF |
| /* NAME=${NAME} */ |
| /* UCONFIGS=${UCONFIGS} */ |
| /* CPPFLAGS=${CPPFLAGS} */ |
| #ifndef _MYCONFIG_H |
| #define _MYCONFIG_H |
| |
| EOF |
| for what in `echo $UCONFIGS`; |
| do |
| echo "#define UCONFIG_${what} 1" >> emtinc/${UCONFIG_LOCAL_H} |
| done |
| cat >> emtinc/${UCONFIG_LOCAL_H} <<EOF |
| #endif |
| EOF |
| CPPFLAGS="${CPPFLAGS} -D${UCONFIG_USE_LOCAL} -I${BUILD_DIR}/${NAME}/emtinc" |
| echo "CPPFLAGS=\"$CPPFLAGS\" Configure $COPTS --srcdir=$SRC_DIR" |
| $SRC_DIR/runConfigureICU ${ICUPLATFORM} $COPTS --prefix=${BUILD_DIR}/I${NAME} --srcdir=$SRC_DIR 2>&1 > ${BUILD_DIR}/${NAME}/config.out |
| } |
| |
| stats() |
| { |
| STATUS="${NAME}: ${1} "`date` |
| echo ${STATUS} >> ${STATS} |
| echo "[1m*** ${NAME} ********* ${1} ************* [m" |
| } |
| |
| fail() |
| { |
| FAILURE="error: ${BUILD_DIR}/${NAME}: ${1} "`date` |
| echo ${FAILURE} >> ${FAILS} |
| echo ${FAILURE} >> ${STATS} |
| echo "[7m${FAILURE}[m" |
| } |
| |
| # Do an actual build |
| bld() |
| { |
| ##*## Stream filter to put 'NAME: ' in front of |
| ##*## every line: |
| ##*## . . . 2>&1 | tee -a ./bld.log | sed -e "s/^/${NAME}: /" |
| cd ${BUILD_DIR}/${NAME} |
| stats "make -k ${JOPT} all ${1}" |
| /usr/bin/time -o ${BUILD_DIR}/times/${NAME}.all make -k ${JOPT} all ${1} DEPS= || fail make |
| stats install |
| /usr/bin/time -o ${BUILD_DIR}/times/${NAME}.install make -k install ${1} DEPS= INSTALL_DATA='ln -svf ' || fail install |
| /usr/bin/time -o ${BUILD_DIR}/times/${NAME}.il make -k install-local ${1} DEPS= || fail install-local |
| stats check |
| /usr/bin/time -o ${BUILD_DIR}/times/${NAME}.chk make -k ${JOPT} check ${1} INTLTEST_OPTS=-w CINTLTST_OPTS=-w DEPS= || fail check |
| stats hdrtst |
| PATH=${BUILD_DIR}/I${NAME}/bin:$PATH make -k -C ${BUILD_DIR}/${NAME}/test/hdrtst/ DEPS= check || fail hdrtst |
| } |
| |
| |
| # Do a complete cycle for a run |
| # arg: opts to build |
| doit() |
| { |
| ban ; clean ; config ; bld ${1} |
| } |
| |
| # Set up the variables for convenience |
| NO_COL="NO_COLLATION" |
| NO_BRK="NO_BREAK_ITERATION" |
| NO_FMT="NO_FORMATTING" |
| NO_UCM="NO_LEGACY_CONVERSION" |
| # Since NO_CONVERSION is only meant to allow the common and i18n |
| # libraries to be built, we don't test this configuration. |
| #NO_CNV="NO_CONVERSION" |
| NO_FIO="NO_FILE_IO" |
| NO_XLT="NO_TRANSLITERATION" |
| NO_RGX="NO_REGULAR_EXPRESSIONS" |
| JS_COL="ONLY_COLLATION" |
| NO_NRM="NO_NORMALIZATION" |
| NO_IDN="NO_IDNA" |
| NO_SVC="NO_SERVICE" |
| NO_MST="$NO_COL $NO_BRK $NO_FMT $NO_UCM $NO_FIO $NO_RGX $NO_XLT $NO_NRM $NO_IDN $NO_SVC" |
| NO_ALL="$NO_MST $NO_SVC" |
| |
| # Now, come the actual test runs |
| # Each one sets a NAME, and CPPFLAGS or other flags, and calls doit |
| |
| ###################### |
| # DEFAULT |
| export NAME=DEFAULT |
| export UCONFIGS="" |
| export CPPFLAGS="" |
| doit |
| USE_PREBUILT_DATA="ICUDATA_SOURCE_ARCHIVE=`echo ${BUILD_DIR}/DEFAULT/data/out/tmp/*.dat`" |
| ###################### |
| |
| ###################### |
| # NO_MST |
| export NAME=NO_MST |
| export UCONFIGS="$NO_MST" |
| export CPPFLAGS="" |
| doit |
| ###################### |
| |
| ###################### |
| # NO_RGX |
| export NAME=NO_RGX |
| export UCONFIGS="$NO_RGX" |
| export CPPFLAGS="" |
| doit ${USE_PREBUILT_DATA} |
| ###################### |
| |
| ###################### |
| # NO_COL |
| export NAME=NO_COL |
| export UCONFIGS="$NO_COL" |
| export CPPFLAGS="" |
| doit |
| ###################### |
| |
| ###################### |
| # NO_BRK |
| export NAME=NO_BRK |
| export UCONFIGS="$NO_BRK" |
| export CPPFLAGS="" |
| doit |
| ###################### |
| |
| ###################### |
| # NO_FMT |
| export NAME=NO_FMT |
| export UCONFIGS="$NO_FMT" |
| export CPPFLAGS="" |
| doit |
| ###################### |
| |
| ###################### |
| # NO_UCM |
| export NAME=NO_UCM |
| export UCONFIGS="$NO_UCM" |
| export CPPFLAGS="" |
| doit |
| ###################### |
| |
| ###################### |
| # NO_FIO |
| export NAME=NO_FIO |
| export UCONFIGS="$NO_FIO" |
| export CPPFLAGS="" |
| doit ${USE_PREBUILT_DATA} |
| ###################### |
| |
| ###################### |
| # NO_XLT |
| export NAME=NO_XLT |
| export UCONFIGS="$NO_XLT" |
| export CPPFLAGS="" |
| doit |
| ###################### |
| |
| ###################### |
| # NO_IDN |
| export NAME=NO_IDN |
| export UCONFIGS="$NO_IDN" |
| export CPPFLAGS="" |
| doit |
| ###################### |
| |
| ###################### |
| # NO_NRM |
| export NAME=NO_NRM |
| export UCONFIGS="$NO_NRM" |
| export CPPFLAGS="" |
| doit |
| ###################### |
| |
| ###################### |
| # NO_SVC |
| export NAME=NO_SVC |
| export UCONFIGS="$NO_SVC" |
| export CPPFLAGS="" |
| doit |
| ###################### |
| |
| ###################### |
| # JS_COL |
| export NAME=JS_COL |
| export UCONFIGS="$JS_COL" |
| export CPPFLAGS="" |
| doit |
| ###################### |
| |
| ###################### |
| # NO_ALL |
| export NAME=NO_ALL |
| export UCONFIGS="$NO_ALL" |
| export CPPFLAGS="" |
| doit |
| ###################### |
| |
| |
| NAME=done |
| ban |
| echo "All builds finished! Times are in ${BUILD_DIR}/times" |
| echo "There were errors if the following grep finds anything." |
| echo "grep status ${BUILD_DIR}/times/*" |
| grep status ${BUILD_DIR}/times/* |
| |
| if [ -s ${FAILS} ]; |
| then |
| echo "Failures: " |
| cat ${FAILS} |
| fi |
| |
