/**
*******************************************************************************
* Copyright (C) 1996-2005, International Business Machines Corporation and    *
* others. All Rights Reserved.                                                *
*******************************************************************************
*/
package com.ibm.icu.text;

/**
 * <p>A <code>CollationKey</code> represents a <code>String</code>
 * under the rules of a specific <code>Collator</code>
 * object. Comparing two <code>CollationKey</code>s returns the
 * relative order of the <code>String</code>s they represent.</p>
 *
 * <p>Since the rule set of <code>Collator</code>s can differ, the
 * sort orders of the same string under two different
 * <code>Collator</code>s might differ.  Hence comparing
 * <code>CollationKey</code>s generated from different
 * <code>Collator</code>s can give incorrect results.</p>
 
 * <p>Both the method
 * <code>CollationKey.compareTo(CollationKey)</code> and the method
 * <code>Collator.compare(String, String)</code> compare two strings
 * and returns their relative order.  The performance characterictics
 * of these two approaches can differ.</p>
 *
 * <p>During the construction of a <code>CollationKey</code>, the
 * entire source string is examined and processed into a series of
 * bits terminated by a null, that are stored in the <code>CollationKey</code>. 
 * When <code>CollationKey.compareTo(CollationKey)</code> executes, it
 * performs bitwise comparison on the bit sequences.  This can incurs
 * startup cost when creating the <code>CollationKey</code>, but once
 * the key is created, binary comparisons are fast.  This approach is
 * recommended when the same strings are to be compared over and over
 * again.</p>
 *
 * <p>On the other hand, implementations of
 * <code>Collator.compare(String, String)</code> can examine and
 * process the strings only until the first characters differing in
 * order.  This approach is recommended if the strings are to be
 * compared only once.</p>
 * 
 * <p>More information about the composition of the bit sequence can
 * be found in the 
 * <a href="http://icu.sourceforge.net/userguide/Collate_ServiceArchitecture.html">
 * user guide</a>.</p>
 *
 * <p>The following example shows how <code>CollationKey</code>s can be used
 * to sort a list of <code>String</code>s.</p>
 * <blockquote>
 * <pre>
 * // Create an array of CollationKeys for the Strings to be sorted.
 * Collator myCollator = Collator.getInstance();
 * CollationKey[] keys = new CollationKey[3];
 * keys[0] = myCollator.getCollationKey("Tom");
 * keys[1] = myCollator.getCollationKey("Dick");
 * keys[2] = myCollator.getCollationKey("Harry");
 * sort( keys );
 * <br>
 * //...
 * <br>
 * // Inside body of sort routine, compare keys this way
 * if( keys[i].compareTo( keys[j] ) > 0 )
 *    // swap keys[i] and keys[j]
 * <br>
 * //...
 * <br>
 * // Finally, when we've returned from sort.
 * System.out.println( keys[0].getSourceString() );
 * System.out.println( keys[1].getSourceString() );
 * System.out.println( keys[2].getSourceString() );
 * </pre>
 * </blockquote>
 * </p>
 * <p>
 * This class is not subclassable
 * </p>
 * @see Collator
 * @see RuleBasedCollator
 * @author Syn Wee Quek
 * @stable ICU 2.8 
 */
public final class CollationKey implements Comparable 
{
    // public inner classes -------------------------------------------------
    
    /** 
     * Options that used in the API CollationKey.getBound() for getting a 
     * CollationKey based on the bound mode requested.
     * @stable ICU 2.6
     */
    public static final class BoundMode 
    {
        /*
         * do not change the values assigned to the members of this enum. 
         * Underlying code depends on them having these numbers  
         */
         
        /** 
         * Lower bound
         * @stable ICU 2.6
         */
        public static final int LOWER = 0;

        /** 
         * Upper bound that will match strings of exact size
         * @stable ICU 2.6
         */
        public static final int UPPER = 1;

        /** 
         * Upper bound that will match all the strings that have the same 
         * initial substring as the given string
         * @stable ICU 2.6
         */
        public static final int UPPER_LONG = 2;

        /**
         * Number of bound mode
         * @stable ICU 2.6
         */
        public static final int COUNT = 3;
        
        /**
         * Private Constructor
         */
        ///CLOVER:OFF
        private BoundMode(){};
        ///CLOVER:ON
    };
    
    // public constructor ---------------------------------------------------
    
    /**
     * CollationKey constructor.
     * This constructor is given public access, unlike the JDK version, to
     * allow access to users extending the Collator class. See 
     * {@link Collator#getCollationKey(String)}. 
     * @param source string this CollationKey is to represent
     * @param key array of bytes that represent the collation order of argument
     *            source terminated by a null
     * @see Collator
     * @stable ICU 2.8
     */
    public CollationKey(String source, byte key[])
    {
        m_source_ = source;
        m_key_ = key;
        m_hashCode_ = 0;
        m_length_ = -1;
    }
    
    /**
     * CollationKey constructor that forces key to release its internal byte 
     * array for adoption. key will have a null byte array after this 
     * construction.
     * @param source string this CollationKey is to represent
     * @param key RawCollationKey object that represents the collation order of 
     *            argument source. 
     * @see Collator
     * @see RawCollationKey
     * @stable ICU 2.8 
     */
    public CollationKey(String source, RawCollationKey key)
    {
        m_source_ = source;
        m_key_ = key.releaseBytes();
        m_hashCode_ = 0;
        m_length_ = -1;
    }
    
    // public getters -------------------------------------------------------
    
    /**
     * Return the source string that this CollationKey represents.
     * @return source string that this CollationKey represents
     * @stable ICU 2.8
     */
    public String getSourceString() 
    {
        return m_source_;
    }

    /**
     * <p>Duplicates and returns the value of this CollationKey as a sequence 
     * of big-endian bytes terminated by a null.</p> 
     *
     * <p>If two CollationKeys can be legitimately compared, then one can
     * compare the byte arrays of each to obtain the same result, e.g.
     * <pre>
     * byte key1[] = collationkey1.toByteArray();
     * byte key2[] = collationkey2.toByteArray();
     * int key, targetkey;
     * int i = 0;
     * do {
     *       key = key1[i] & 0xFF;
     *     targetkey = key2[i] & 0xFF;
     *     if (key &lt; targetkey) {
     *         System.out.println("String 1 is less than string 2");
     *         return;
     *     }
     *     if (targetkey &lt; key) {
     *         System.out.println("String 1 is more than string 2");
     *     }
     *     i ++;
     * } while (key != 0 && targetKey != 0);
     *
     * System.out.println("Strings are equal.");
     * </pre>
     * </p>  
     * @return CollationKey value in a sequence of big-endian byte bytes 
     *         terminated by a null.
     * @stable ICU 2.8
     */
    public byte[] toByteArray() 
    {
        int length = 0;
        while (true) {
            if (m_key_[length] == 0) {
              break;
            }
            length ++;
        }
        length ++;
        byte result[] = new byte[length];
        System.arraycopy(m_key_, 0, result, 0, length);
        return result;
    }

    // public other methods -------------------------------------------------    
     
    /**
     * <p>Compare this CollationKey to another CollationKey.  The
     * collation rules of the Collator that created this key are
     * applied.</p>
     *
     * <p><strong>Note:</strong> Comparison between CollationKeys
     * created by different Collators might return incorrect
     * results.  See class documentation.</p>
     *
     * @param target target CollationKey
     * @return an integer value.  If the value is less than zero this CollationKey
     *         is less than than target, if the value is zero they are equal, and
     *         if the value is greater than zero this CollationKey is greater 
     *         than target.
     * @exception NullPointerException is thrown if argument is null.
     * @see Collator#compare(String, String)
     * @stable ICU 2.8 
     */
    public int compareTo(CollationKey target)
    {
    for (int i = 0;; ++i) {
        int l = m_key_[i]&0xff;
        int r = target.m_key_[i]&0xff;
        if (l < r) {
        return -1;
        } else if (l > r) {
        return 1;
        } else if (l == 0) {
        return 0;
        }
    }
    }

    /**
     * <p>Compare this CollationKey with the specified Object.  The
     * collation rules of the Collator that created this key are
     * applied.</p>
     * 
     * <p>See note in compareTo(CollationKey) for warnings about possible
     * incorrect results.</p>
     *
     * @param obj the Object to be compared to.
     * @return Returns a negative integer, zero, or a positive integer 
     *         respectively if this CollationKey is less than, equal to, or 
     *         greater than the given Object.
     * @exception ClassCastException is thrown when the argument is not 
     *            a CollationKey.  NullPointerException is thrown when the argument 
     *            is null.
     * @see #compareTo(CollationKey)
     * @stable ICU 2.8 
     */
    public int compareTo(Object obj) 
    {
       return compareTo((CollationKey)obj);
    }

    /**
     * <p>Compare this CollationKey and the specified Object for
     * equality.  The collation rules of the Collator that created
     * this key are applied.</p>
     *
     * <p>See note in compareTo(CollationKey) for warnings about
     * possible incorrect results.</p>
     *
     * @param target the object to compare to.
     * @return true if the two keys compare as equal, false otherwise.
     * @see #compareTo(CollationKey)
     * @exception ClassCastException is thrown when the argument is not 
     *            a CollationKey.  NullPointerException is thrown when the argument 
     *            is null.
     * @stable ICU 2.8 
     */
    public boolean equals(Object target) 
    {
        if (!(target instanceof CollationKey)) {
            return false;
        }
        
        return equals((CollationKey)target);
    }
    
    /**
     * <p>
     * Compare this CollationKey and the argument target CollationKey for 
     * equality.
     * The collation 
     * rules of the Collator object which created these objects are applied.
     * </p>
     * <p>
     * See note in compareTo(CollationKey) for warnings of incorrect results
     * </p>
     * @param target the CollationKey to compare to.
     * @return true if two objects are equal, false otherwise.
     * @exception NullPointerException is thrown when the argument is null.
     * @stable ICU 2.8
     */
    public boolean equals(CollationKey target) 
    {
        if (this == target) {
            return true;
        }
        if (target == null) {
            return false;
        }
        CollationKey other = (CollationKey)target;
        int i = 0;
        while (true) {
            if (m_key_[i] != other.m_key_[i]) {
                return false;
            }
            if (m_key_[i] == 0) {
              break;
            }
            i ++;
        }
        return true;
    }

    /**
     * <p>Returns a hash code for this CollationKey. The hash value is calculated 
     * on the key itself, not the String from which the key was created. Thus 
     * if x and y are CollationKeys, then x.hashCode(x) == y.hashCode() 
     * if x.equals(y) is true. This allows language-sensitive comparison in a 
     * hash table.
     * </p>
     * @return the hash value.
     * @stable ICU 2.8
     */
    public int hashCode() 
    {
        if (m_hashCode_ == 0) {
            if (m_key_ == null) {
                m_hashCode_ = 1;
            }
            else {
                int size = m_key_.length >> 1;
                StringBuffer key = new StringBuffer(size);
                int i = 0;
                while (m_key_[i] != 0 && m_key_[i + 1] != 0) {
                    key.append((char)((m_key_[i] << 8) | m_key_[i + 1]));
                    i += 2;
                }
                if (m_key_[i] != 0) {
                    key.append((char)(m_key_[i] << 8));
                }
                m_hashCode_ = key.toString().hashCode();
            }
        }
        return m_hashCode_;
    }
    
    /**
     * <p>
     * Produce a bound for the sort order of a given collation key and a 
     * strength level. This API does not attempt to find a bound for the 
     * CollationKey String representation, hence null will be returned in its 
     * place.
     * </p>
     * <p>
     * Resulting bounds can be used to produce a range of strings that are
     * between upper and lower bounds. For example, if bounds are produced
     * for a sortkey of string "smith", strings between upper and lower 
     * bounds with primary strength would include "Smith", "SMITH", "sMiTh".
     * </p>
     * <p>
     * There are two upper bounds that can be produced. If BoundMode.UPPER
     * is produced, strings matched would be as above. However, if a bound
     * is produced using BoundMode.UPPER_LONG is used, the above example will
     * also match "Smithsonian" and similar.
     * </p>
     * <p>
     * For more on usage, see example in test procedure 
     * <a href=http://oss.software.ibm.com/cvs/icu4j/~checkout~/icu4j/src/com/ibm/icu/dev/test/collator/CollationAPITest.java?rev=&content-type=text/plain>
     * src/com/ibm/icu/dev/test/collator/CollationAPITest/TestBounds.
     * </a>
     * </p>
     * <p>
     * Collation keys produced may be compared using the <TT>compare</TT> API.
     * </p>
     * @param boundType Mode of bound required. It can be BoundMode.LOWER, which 
     *              produces a lower inclusive bound, BoundMode.UPPER, that 
     *              produces upper bound that matches strings of the same 
     *              length or BoundMode.UPPER_LONG that matches strings that 
     *              have the same starting substring as the source string.
     * @param noOfLevels Strength levels required in the resulting bound 
     *                 (for most uses, the recommended value is PRIMARY). This
     *                 strength should be less than the maximum strength of 
     *                 this CollationKey.
     *                 See users guide for explanation on the strength levels a 
     *                 collation key can have. 
     * @return the result bounded CollationKey with a valid sort order but 
     *         a null String representation.
     * @exception IllegalArgumentException thrown when the strength level 
     *            requested is higher than or equal to the strength in this
     *            CollationKey. 
     *            In the case of an Exception, information 
     *            about the maximum strength to use will be returned in the 
     *            Exception. The user can then call getBound() again with the 
     *            appropriate strength.
     * @see CollationKey
     * @see CollationKey.BoundMode
     * @see Collator#PRIMARY
     * @see Collator#SECONDARY
     * @see Collator#TERTIARY
     * @see Collator#QUATERNARY
     * @see Collator#IDENTICAL
     * @stable ICU 2.6
     */
    public CollationKey getBound(int boundType, int noOfLevels) 
    {
        // Scan the string until we skip enough of the key OR reach the end of 
        // the key
        int offset = 0;
        int keystrength = Collator.PRIMARY;
        
        if (noOfLevels > Collator.PRIMARY) {
            while (offset < m_key_.length && m_key_[offset] != 0) {
                if (m_key_[offset ++] 
                        == RuleBasedCollator.SORT_LEVEL_TERMINATOR_) {
                    keystrength ++;
                    noOfLevels --;
                    if (noOfLevels == Collator.PRIMARY 
                        || offset == m_key_.length || m_key_[offset] == 0) {
                        offset --;
                        break;
                    }
                }
            } 
        }
        
        if (noOfLevels > 0) {
            throw new IllegalArgumentException(
                                  "Source collation key has only " 
                                  + keystrength 
                                  + " strength level. Call getBound() again "
                                  + " with noOfLevels < " + keystrength);
        }
        
        // READ ME: this code assumes that the values for BoundMode variables 
        // will not changes. They are set so that the enum value corresponds to 
        // the number of extra bytes each bound type needs.
        byte resultkey[] = new byte[offset + boundType + 1];
        System.arraycopy(m_key_, 0, resultkey, 0, offset);
        switch (boundType) {
            case BoundMode.LOWER: // = 0
                // Lower bound just gets terminated. No extra bytes
                break;
            case BoundMode.UPPER: // = 1
                // Upper bound needs one extra byte
                resultkey[offset ++] = 2;
                break;
            case BoundMode.UPPER_LONG: // = 2
                // Upper long bound needs two extra bytes
                resultkey[offset ++] = (byte)0xFF;
                resultkey[offset ++] = (byte)0xFF;
                break;
            default:
                throw new IllegalArgumentException(
                                                "Illegal boundType argument");
        }
        resultkey[offset ++] = 0;
        return new CollationKey(null, resultkey);
    }


    /** 
     * <p>
     * Merges this CollationKey with another. Only the sorting order of the 
     * CollationKeys will be merged. This API does not attempt to merge the 
     * String representations of the CollationKeys, hence null will be returned
     * as the String representation.
     * </p>
     * <p>
     * The strength levels are merged with their corresponding counterparts 
     * (PRIMARIES with PRIMARIES, SECONDARIES with SECONDARIES etc.). 
     * </p>
     * <p>
     * The merged String representation of the result CollationKey will be a
     * concatenation of the String representations of the 2 source 
     * CollationKeys.
     * </p>
     * <p>
     * Between the values from the same level a separator is inserted.
     * example (uncompressed):
     * <pre> 
     * 191B1D 01 050505 01 910505 00 and 1F2123 01 050505 01 910505 00
     * will be merged as 
     * 191B1D 02 1F212301 050505 02 050505 01 910505 02 910505 00
     * </pre>
     * </p>
     * <p>
     * This allows for concatenating of first and last names for sorting, among 
     * other things.
     * </p>
     * </p>
     * @param source CollationKey to merge with 
     * @return a CollationKey that contains the valid merged sorting order 
     *         with a null String representation, 
     *         i.e. <tt>new CollationKey(null, merge_sort_order)</tt>
     * @exception IllegalArgumentException thrown if source CollationKey
     *            argument is null or of 0 length.
     * @stable ICU 2.6
     */
    public CollationKey merge(CollationKey source)
    {
        // check arguments
        if (source == null || source.getLength() == 0) {
            throw new IllegalArgumentException(
                      "CollationKey argument can not be null or of 0 length");
        }
    
        getLength(); // gets the length of this sort key
        int sourcelength = source.getLength();
        // 1 extra for the last strength that has no seperators
        byte result[] = new byte[m_length_ + sourcelength + 2];
    
        // merge the sort keys with the same number of levels
        int rindex = 0;
        int index = 0;
        int sourceindex = 0;
        while (true) { 
            // while both have another level
            // copy level from src1 not including 00 or 01
            // unsigned issues
            while (m_key_[index] < 0 || m_key_[index] >= MERGE_SEPERATOR_) {
                result[rindex ++] = m_key_[index ++];
            }
    
            // add a 02 merge separator
            result[rindex ++] = MERGE_SEPERATOR_;
    
            // copy level from src2 not including 00 or 01
            while (source.m_key_[sourceindex] < 0 
                   || source.m_key_[sourceindex] >= MERGE_SEPERATOR_) {
                result[rindex ++] = source.m_key_[sourceindex ++];
            }
    
            // if both sort keys have another level, then add a 01 level 
            // separator and continue
            if (m_key_[index] == RuleBasedCollator.SORT_LEVEL_TERMINATOR_
                && source.m_key_[sourceindex] 
                        == RuleBasedCollator.SORT_LEVEL_TERMINATOR_) {
                ++ index;
                ++ sourceindex;
                result[rindex ++] = RuleBasedCollator.SORT_LEVEL_TERMINATOR_;
            }
            else {
                break;
            }
        }
    
        // here, at least one sort key is finished now, but the other one
        // might have some contents left from containing more levels;
        // that contents is just appended to the result
        if (m_key_[index] != 0) {
            System.arraycopy(m_key_, index, result, rindex,
                             m_length_ - index);
        }
        else if (source.m_key_[sourceindex] != 0) {
            System.arraycopy(source.m_key_, sourceindex, result, rindex,  
                             source.m_length_ - sourceindex);
        }
        result[result.length - 1] = 0;
    
        // trust that neither sort key contained illegally embedded zero bytes
        return new CollationKey(null, result);
    }

    // private data members -------------------------------------------------

    /**
     * Sequence of bytes that represents the sort key
     */
    private byte m_key_[];
    
    /**
     * Source string this CollationKey represents
     */    
    private String m_source_;

    /**
     * Hash code for the key
     */
    private int m_hashCode_;
    /**
     * Gets the length of this CollationKey
     */
    private int m_length_;
    /**
     * Collation key merge seperator
     */
    private static final int MERGE_SEPERATOR_ = 2;
    
    // private methods ------------------------------------------------------
    
    /**
     * Gets the length of the CollationKey
     * @return length of the CollationKey
     */
    private int getLength()
    {
        if (m_length_ >= 0) {
            return m_length_;
        }
        int length = m_key_.length;
        for (int index = 0; index < length; index ++) {
            if (m_key_[index] == 0) {
                length = index;
                break;
            }
        } 
        m_length_ = length;
        return m_length_;
    }
}