| /* |
| ******************************************************************************* |
| * |
| * Copyright (C) 2001-2003, International Business Machines |
| * Corporation and others. All Rights Reserved. |
| * |
| ******************************************************************************* |
| * file name: unormimp.h |
| * encoding: US-ASCII |
| * tab size: 8 (not used) |
| * indentation:4 |
| * |
| * created on: 2001may25 |
| * created by: Markus W. Scherer |
| */ |
| |
| #ifndef __UNORMIMP_H__ |
| #define __UNORMIMP_H__ |
| |
| #include "unicode/utypes.h" |
| |
| #if !UCONFIG_NO_NORMALIZATION |
| |
| #include "unicode/uiter.h" |
| #include "unicode/unorm.h" |
| #include "unicode/uset.h" |
| #include "utrie.h" |
| #include "ustr_imp.h" |
| |
| /* |
| * This new implementation of the normalization code loads its data from |
| * unorm.dat, which is generated with the gennorm tool. |
| * The format of that file is described at the end of this file. |
| */ |
| |
| /* norm32 value constants */ |
| enum { |
| /* quick check flags 0..3 set mean "no" for their forms */ |
| _NORM_QC_NFC=0x11, /* no|maybe */ |
| _NORM_QC_NFKC=0x22, /* no|maybe */ |
| _NORM_QC_NFD=4, /* no */ |
| _NORM_QC_NFKD=8, /* no */ |
| |
| _NORM_QC_ANY_NO=0xf, |
| |
| /* quick check flags 4..5 mean "maybe" for their forms; test flags>=_NORM_QC_MAYBE */ |
| _NORM_QC_MAYBE=0x10, |
| _NORM_QC_ANY_MAYBE=0x30, |
| |
| _NORM_QC_MASK=0x3f, |
| |
| _NORM_COMBINES_FWD=0x40, |
| _NORM_COMBINES_BACK=0x80, |
| _NORM_COMBINES_ANY=0xc0, |
| |
| _NORM_CC_SHIFT=8, /* UnicodeData.txt combining class in bits 15..8 */ |
| _NORM_CC_MASK=0xff00, |
| |
| _NORM_EXTRA_SHIFT=16, /* 16 bits for the index to UChars and other extra data */ |
| _NORM_EXTRA_INDEX_TOP=0xfc00, /* start of surrogate specials after shift */ |
| |
| _NORM_EXTRA_SURROGATE_MASK=0x3ff, |
| _NORM_EXTRA_SURROGATE_TOP=0x3f0, /* hangul etc. */ |
| |
| _NORM_EXTRA_HANGUL=_NORM_EXTRA_SURROGATE_TOP, |
| _NORM_EXTRA_JAMO_L, |
| _NORM_EXTRA_JAMO_V, |
| _NORM_EXTRA_JAMO_T |
| }; |
| |
| /* norm32 value constants using >16 bits */ |
| #define _NORM_MIN_SPECIAL 0xfc000000 |
| #define _NORM_SURROGATES_TOP 0xfff00000 |
| #define _NORM_MIN_HANGUL 0xfff00000 |
| #define _NORM_MIN_JAMO_V 0xfff20000 |
| #define _NORM_JAMO_V_TOP 0xfff30000 |
| |
| /* value constants for auxTrie */ |
| enum { |
| _NORM_AUX_COMP_EX_SHIFT=10, |
| _NORM_AUX_UNSAFE_SHIFT=11, |
| _NORM_AUX_NFC_SKIPPABLE_F_SHIFT=12 |
| }; |
| |
| #define _NORM_AUX_MAX_FNC ((int32_t)1<<_NORM_AUX_COMP_EX_SHIFT) |
| |
| #define _NORM_AUX_FNC_MASK (uint32_t)(_NORM_AUX_MAX_FNC-1) |
| #define _NORM_AUX_COMP_EX_MASK ((uint32_t)1<<_NORM_AUX_COMP_EX_SHIFT) |
| #define _NORM_AUX_UNSAFE_MASK ((uint32_t)1<<_NORM_AUX_UNSAFE_SHIFT) |
| #define _NORM_AUX_NFC_SKIP_F_MASK ((uint32_t)1<<_NORM_AUX_NFC_SKIPPABLE_F_SHIFT) |
| |
| /* canonStartSets[0..31] contains indexes for what is in the array */ |
| enum { |
| _NORM_SET_INDEX_CANON_SETS_LENGTH, /* number of uint16_t in canonical starter sets */ |
| _NORM_SET_INDEX_CANON_BMP_TABLE_LENGTH, /* number of uint16_t in the BMP search table (contains pairs) */ |
| _NORM_SET_INDEX_CANON_SUPP_TABLE_LENGTH,/* number of uint16_t in the supplementary search table (contains triplets) */ |
| |
| _NORM_SET_INDEX_TOP=32 /* changing this requires a new formatVersion */ |
| }; |
| |
| /* more constants for canonical starter sets */ |
| |
| /* 14 bit indexes to canonical USerializedSets */ |
| #define _NORM_MAX_CANON_SETS 0x4000 |
| |
| /* single-code point BMP sets are encoded directly in the search table except if result=0x4000..0x7fff */ |
| #define _NORM_CANON_SET_BMP_MASK 0xc000 |
| #define _NORM_CANON_SET_BMP_IS_INDEX 0x4000 |
| |
| /* indexes[] value names */ |
| enum { |
| _NORM_INDEX_TRIE_SIZE, /* number of bytes in normalization trie */ |
| _NORM_INDEX_UCHAR_COUNT, /* number of UChars in extra data */ |
| |
| _NORM_INDEX_COMBINE_DATA_COUNT, /* number of uint16_t words for combining data */ |
| _NORM_INDEX_COMBINE_FWD_COUNT, /* number of code points that combine forward */ |
| _NORM_INDEX_COMBINE_BOTH_COUNT, /* number of code points that combine forward and backward */ |
| _NORM_INDEX_COMBINE_BACK_COUNT, /* number of code points that combine backward */ |
| |
| _NORM_INDEX_MIN_NFC_NO_MAYBE, /* first code point with quick check NFC NO/MAYBE */ |
| _NORM_INDEX_MIN_NFKC_NO_MAYBE, /* first code point with quick check NFKC NO/MAYBE */ |
| _NORM_INDEX_MIN_NFD_NO_MAYBE, /* first code point with quick check NFD NO/MAYBE */ |
| _NORM_INDEX_MIN_NFKD_NO_MAYBE, /* first code point with quick check NFKD NO/MAYBE */ |
| |
| _NORM_INDEX_FCD_TRIE_SIZE, /* number of bytes in FCD trie */ |
| |
| _NORM_INDEX_AUX_TRIE_SIZE, /* number of bytes in the auxiliary trie */ |
| _NORM_INDEX_CANON_SET_COUNT, /* number of uint16_t in the array of serialized USet */ |
| |
| _NORM_INDEX_TOP=32 /* changing this requires a new formatVersion */ |
| }; |
| |
| enum { |
| /* FCD check: everything below this code point is known to have a 0 lead combining class */ |
| _NORM_MIN_WITH_LEAD_CC=0x300 |
| }; |
| |
| enum { |
| /** |
| * Bit 7 of the length byte for a decomposition string in extra data is |
| * a flag indicating whether the decomposition string is |
| * preceded by a 16-bit word with the leading and trailing cc |
| * of the decomposition (like for A-umlaut); |
| * if not, then both cc's are zero (like for compatibility ideographs). |
| */ |
| _NORM_DECOMP_FLAG_LENGTH_HAS_CC=0x80, |
| /** |
| * Bits 6..0 of the length byte contain the actual length. |
| */ |
| _NORM_DECOMP_LENGTH_MASK=0x7f |
| }; |
| |
| #endif /* #if !UCONFIG_NO_NORMALIZATION */ |
| |
| /* Korean Hangul and Jamo constants */ |
| enum { |
| JAMO_L_BASE=0x1100, /* "lead" jamo */ |
| JAMO_V_BASE=0x1161, /* "vowel" jamo */ |
| JAMO_T_BASE=0x11a7, /* "trail" jamo */ |
| |
| HANGUL_BASE=0xac00, |
| |
| JAMO_L_COUNT=19, |
| JAMO_V_COUNT=21, |
| JAMO_T_COUNT=28, |
| |
| HANGUL_COUNT=JAMO_L_COUNT*JAMO_V_COUNT*JAMO_T_COUNT |
| }; |
| |
| #if !UCONFIG_NO_NORMALIZATION |
| |
| /* Constants for options flags for normalization. @draft ICU 2.6 */ |
| enum { |
| /** Options bit 0, do not decompose Hangul syllables. @draft ICU 2.6 */ |
| UNORM_NX_HANGUL=1, |
| /** Options bit 1, do not decompose CJK compatibility characters. @draft ICU 2.6 */ |
| UNORM_NX_CJK_COMPAT=2 |
| }; |
| |
| /** |
| * Is the normalizer data loaded? |
| * This is used internally before other internal normalizer functions |
| * are called. |
| * It saves this check in each of many normalization calls that |
| * are made for, e.g., collation. |
| * |
| * @param pErrorCode as usual |
| * @return boolean value for whether the normalization data is loaded |
| * |
| * @internal |
| */ |
| U_CAPI UBool U_EXPORT2 |
| unorm_haveData(UErrorCode *pErrorCode); |
| |
| /** |
| * Internal API for normalizing. |
| * Does not check for bad input. |
| * @internal |
| */ |
| U_CAPI int32_t U_EXPORT2 |
| unorm_internalNormalize(UChar *dest, int32_t destCapacity, |
| const UChar *src, int32_t srcLength, |
| UNormalizationMode mode, int32_t options, |
| UErrorCode *pErrorCode); |
| |
| /** |
| * internal API, used by normlzr.cpp |
| * @internal |
| */ |
| U_CAPI int32_t U_EXPORT2 |
| unorm_decompose(UChar *dest, int32_t destCapacity, |
| const UChar *src, int32_t srcLength, |
| UBool compat, int32_t options, |
| UErrorCode *pErrorCode); |
| |
| /** |
| * internal API, used by normlzr.cpp |
| * @internal |
| */ |
| U_CAPI int32_t U_EXPORT2 |
| unorm_compose(UChar *dest, int32_t destCapacity, |
| const UChar *src, int32_t srcLength, |
| UBool compat, int32_t options, |
| UErrorCode *pErrorCode); |
| |
| #endif /* #if !UCONFIG_NO_NORMALIZATION */ |
| |
| /** |
| * Internal option for unorm_cmpEquivFold() for decomposing. |
| * If not set, just do strcasecmp(). |
| * @internal |
| */ |
| #define _COMPARE_EQUIV 0x80000 |
| |
| #ifndef U_COMPARE_IGNORE_CASE |
| /* see also unorm.h */ |
| /** |
| * Option bit for unorm_compare: |
| * Perform case-insensitive comparison. |
| * @draft ICU 2.2 |
| */ |
| #define U_COMPARE_IGNORE_CASE 0x10000 |
| #endif |
| |
| /** |
| * Internal option for unorm_cmpEquivFold() for strncmp style. |
| * If set, checks for both string length and terminating NUL. |
| * @internal |
| */ |
| #define _STRNCMP_STYLE 0x1000 |
| |
| /** |
| * Internal API, used by u_strcasecmp() etc. |
| * Compare strings for canonical equivalence (optional), |
| * case-insensitively (optional), |
| * in code point order or code unit order. |
| * @internal |
| */ |
| U_CAPI int32_t U_EXPORT2 |
| unorm_cmpEquivFold(const UChar *s1, int32_t length1, |
| const UChar *s2, int32_t length2, |
| uint32_t options, |
| UErrorCode *pErrorCode); |
| |
| #if !UCONFIG_NO_NORMALIZATION |
| |
| /** |
| * Internal API, used by collation code. |
| * Get access to the internal FCD trie table to be able to perform |
| * incremental, per-code unit, FCD checks in collation. |
| * One pointer is sufficient because the trie index values are offset |
| * by the index size, so that the same pointer is used to access the trie data. |
| * @internal |
| */ |
| U_CAPI const uint16_t * U_EXPORT2 |
| unorm_getFCDTrie(UErrorCode *pErrorCode); |
| |
| #ifdef XP_CPLUSPLUS |
| |
| U_NAMESPACE_BEGIN |
| /** |
| * Internal API, used by collation code. |
| * Get the FCD value for a code unit, with |
| * bits 15..8 lead combining class |
| * bits 7..0 trail combining class |
| * |
| * If c is a lead surrogate and the value is not 0, |
| * then instead of combining classes the value |
| * is used in unorm_getFCD16FromSurrogatePair() to get the real value |
| * of the supplementary code point. |
| * |
| * @internal |
| */ |
| inline uint16_t |
| unorm_getFCD16(const uint16_t *fcdTrieIndex, UChar c) { |
| return |
| fcdTrieIndex[ |
| (fcdTrieIndex[ |
| c>>UTRIE_SHIFT |
| ]<<UTRIE_INDEX_SHIFT)+ |
| (c&UTRIE_MASK) |
| ]; |
| } |
| |
| /** |
| * Internal API, used by collation code. |
| * Get the FCD value for a supplementary code point, with |
| * bits 15..8 lead combining class |
| * bits 7..0 trail combining class |
| * |
| * @param fcd16 The FCD value for the lead surrogate, not 0. |
| * @param c2 The trail surrogate code unit. |
| * |
| * @internal |
| */ |
| inline uint16_t |
| unorm_getFCD16FromSurrogatePair(const uint16_t *fcdTrieIndex, uint16_t fcd16, UChar c2) { |
| return |
| fcdTrieIndex[ |
| (fcdTrieIndex[ |
| (int32_t)fcd16+((c2&0x3ff)>>UTRIE_SHIFT) |
| ]<<UTRIE_INDEX_SHIFT)+ |
| (c2&UTRIE_MASK) |
| ]; |
| } |
| |
| U_NAMESPACE_END |
| |
| #endif |
| |
| /** |
| * internal API, used by the canonical iterator |
| * @internal |
| */ |
| U_CAPI int32_t U_EXPORT2 |
| unorm_getDecomposition(UChar32 c, UBool compat, |
| UChar *dest, int32_t destCapacity); |
| |
| /** |
| * internal API, used by uprops.cpp |
| * @internal |
| */ |
| U_CAPI UBool U_EXPORT2 |
| unorm_internalIsFullCompositionExclusion(UChar32 c); |
| |
| /** |
| * Internal API, used by enumeration of canonically equivalent strings |
| * @internal |
| */ |
| U_CAPI UBool U_EXPORT2 |
| unorm_isCanonSafeStart(UChar32 c); |
| |
| /** |
| * Internal API, used by enumeration of canonically equivalent strings |
| * @internal |
| */ |
| U_CAPI UBool U_EXPORT2 |
| unorm_getCanonStartSet(UChar32 c, USerializedSet *fillSet); |
| |
| /** |
| * Is c an NF<mode>-skippable code point? See unormimp.h. |
| * @internal |
| */ |
| U_CAPI UBool U_EXPORT2 |
| unorm_isNFSkippable(UChar32 c, UNormalizationMode mode); |
| |
| /** |
| * Enumerate each normalization data trie and add the |
| * start of each range of same properties to the set. |
| * @internal |
| */ |
| U_CAPI void U_EXPORT2 |
| unorm_addPropertyStarts(USet *set, UErrorCode *pErrorCode); |
| |
| /** |
| * Description of the format of unorm.dat version 2.2. |
| * |
| * Main change from version 1 to version 2: |
| * Use of new, common UTrie instead of normalization-specific tries. |
| * Change to version 2.1: add third/auxiliary trie with associated data. |
| * Change to version 2.2: add skippable (f) flag data (_NORM_AUX_NFC_SKIP_F_MASK). |
| * |
| * For more details of how to use the data structures see the code |
| * in unorm.cpp (runtime normalization code) and |
| * in gennorm.c and gennorm/store.c (build-time data generation). |
| * |
| * For the serialized format of UTrie see utrie.c/UTrieHeader. |
| * |
| * - Overall partition |
| * |
| * unorm.dat customarily begins with a UDataInfo structure, see udata.h and .c. |
| * After that there are the following structures: |
| * |
| * uint16_t indexes[_NORM_INDEX_TOP]; -- _NORM_INDEX_TOP=32, see enum in this file |
| * |
| * UTrie normTrie; -- size in bytes=indexes[_NORM_INDEX_TRIE_SIZE] |
| * |
| * uint16_t extraData[extraDataTop]; -- extraDataTop=indexes[_NORM_INDEX_UCHAR_COUNT] |
| * extraData[0] contains the number of units for |
| * FC_NFKC_Closure (formatVersion>=2.1) |
| * |
| * uint16_t combiningTable[combiningTableTop]; -- combiningTableTop=indexes[_NORM_INDEX_COMBINE_DATA_COUNT] |
| * combiningTableTop may include one 16-bit padding unit |
| * to make sure that fcdTrie is 32-bit-aligned |
| * |
| * UTrie fcdTrie; -- size in bytes=indexes[_NORM_INDEX_FCD_TRIE_SIZE] |
| * |
| * UTrie auxTrie; -- size in bytes=indexes[_NORM_INDEX_AUX_TRIE_SIZE] |
| * |
| * uint16_t canonStartSets[canonStartSetsTop] -- canonStartSetsTop=indexes[_NORM_INDEX_CANON_SET_COUNT] |
| * serialized USets and binary search tables, see below |
| * |
| * |
| * The indexes array contains lengths and sizes of the following arrays and structures |
| * as well as the following values: |
| * indexes[_NORM_INDEX_COMBINE_FWD_COUNT]=combineFwdTop |
| * -- one more than the highest combining index computed for forward-only-combining characters |
| * indexes[_NORM_INDEX_COMBINE_BOTH_COUNT]=combineBothTop-combineFwdTop |
| * -- number of combining indexes computed for both-ways-combining characters |
| * indexes[_NORM_INDEX_COMBINE_BACK_COUNT]=combineBackTop-combineBothTop |
| * -- number of combining indexes computed for backward-only-combining characters |
| * |
| * indexes[_NORM_INDEX_MIN_NF*_NO_MAYBE] (where *={ C, D, KC, KD }) |
| * -- first code point with a quick check NF* value of NO/MAYBE |
| * |
| * |
| * - Tries |
| * |
| * The main structures are two UTrie tables ("compact arrays"), |
| * each with one index array and one data array. |
| * See utrie.h and utrie.c. |
| * |
| * |
| * - Tries in unorm.dat |
| * |
| * The first trie (normTrie above) |
| * provides data for the NF* quick checks and normalization. |
| * The second trie (fcdTrie above) provides data just for FCD checks. |
| * |
| * |
| * - norm32 data words from the first trie |
| * |
| * The norm32Table contains one 32-bit word "norm32" per code point. |
| * It contains the following bit fields: |
| * 31..16 extra data index, _NORM_EXTRA_SHIFT is used to shift this field down |
| * if this index is <_NORM_EXTRA_INDEX_TOP then it is an index into |
| * extraData[] where variable-length normalization data for this |
| * code point is found |
| * if this index is <_NORM_EXTRA_INDEX_TOP+_NORM_EXTRA_SURROGATE_TOP |
| * then this is a norm32 for a leading surrogate, and the index |
| * value is used together with the following trailing surrogate |
| * code unit in the second trie access |
| * if this index is >=_NORM_EXTRA_INDEX_TOP+_NORM_EXTRA_SURROGATE_TOP |
| * then this is a norm32 for a "special" character, |
| * i.e., the character is a Hangul syllable or a Jamo |
| * see _NORM_EXTRA_HANGUL etc. |
| * generally, instead of extracting this index from the norm32 and |
| * comparing it with the above constants, |
| * the normalization code compares the entire norm32 value |
| * with _NORM_MIN_SPECIAL, _NORM_SURROGATES_TOP, _NORM_MIN_HANGUL etc. |
| * |
| * 15..8 combining class (cc) according to UnicodeData.txt |
| * |
| * 7..6 _NORM_COMBINES_ANY flags, used in composition to see if a character |
| * combines with any following or preceding character(s) |
| * at all |
| * 7 _NORM_COMBINES_BACK |
| * 6 _NORM_COMBINES_FWD |
| * |
| * 5..0 quick check flags, set for "no" or "maybe", with separate flags for |
| * each normalization form |
| * the higher bits are "maybe" flags; for NF*D there are no such flags |
| * the lower bits are "no" flags for all forms, in the same order |
| * as the "maybe" flags, |
| * which is (MSB to LSB): NFKD NFD NFKC NFC |
| * 5..4 _NORM_QC_ANY_MAYBE |
| * 3..0 _NORM_QC_ANY_NO |
| * see further related constants |
| * |
| * |
| * - Extra data per code point |
| * |
| * "Extra data" is referenced by the index in norm32. |
| * It is variable-length data. It is only present, and only those parts |
| * of it are, as needed for a given character. |
| * The norm32 extra data index is added to the beginning of extraData[] |
| * to get to a vector of 16-bit words with data at the following offsets: |
| * |
| * [-1] Combining index for composition. |
| * Stored only if norm32&_NORM_COMBINES_ANY . |
| * [0] Lengths of the canonical and compatibility decomposition strings. |
| * Stored only if there are decompositions, i.e., |
| * if norm32&(_NORM_QC_NFD|_NORM_QC_NFKD) |
| * High byte: length of NFKD, or 0 if none |
| * Low byte: length of NFD, or 0 if none |
| * Each length byte also has another flag: |
| * Bit 7 of a length byte is set if there are non-zero |
| * combining classes (cc's) associated with the respective |
| * decomposition. If this flag is set, then the decomposition |
| * is preceded by a 16-bit word that contains the |
| * leading and trailing cc's. |
| * Bits 6..0 of a length byte are the length of the |
| * decomposition string, not counting the cc word. |
| * [1..n] NFD |
| * [n+1..] NFKD |
| * |
| * Each of the two decompositions consists of up to two parts: |
| * - The 16-bit words with the leading and trailing cc's. |
| * This is only stored if bit 7 of the corresponding length byte |
| * is set. In this case, at least one of the cc's is not zero. |
| * High byte: leading cc==cc of the first code point in the decomposition string |
| * Low byte: trailing cc==cc of the last code point in the decomposition string |
| * - The decomposition string in UTF-16, with length code units. |
| * |
| * |
| * - Combining indexes and combiningTable[] |
| * |
| * Combining indexes are stored at the [-1] offset of the extra data |
| * if the character combines forward or backward with any other characters. |
| * They are used for (re)composition in NF*C. |
| * Values of combining indexes are arranged according to whether a character |
| * combines forward, backward, or both ways: |
| * forward-only < both ways < backward-only |
| * |
| * The index values for forward-only and both-ways combining characters |
| * are indexes into the combiningTable[]. |
| * The index values for backward-only combining characters are simply |
| * incremented from the preceding index values to be unique. |
| * |
| * In the combiningTable[], a variable-length list |
| * of variable-length (back-index, code point) pair entries is stored |
| * for each forward-combining character. |
| * |
| * These back-indexes are the combining indexes of both-ways or backward-only |
| * combining characters that the forward-combining character combines with. |
| * |
| * Each list is sorted in ascending order of back-indexes. |
| * Each list is terminated with the last back-index having bit 15 set. |
| * |
| * Each pair (back-index, code point) takes up either 2 or 3 |
| * 16-bit words. |
| * The first word of a list entry is the back-index, with its bit 15 set if |
| * this is the last pair in the list. |
| * |
| * The second word contains flags in bits 15..13 that determine |
| * if there is a third word and how the combined character is encoded: |
| * 15 set if there is a third word in this list entry |
| * 14 set if the result is a supplementary character |
| * 13 set if the result itself combines forward |
| * |
| * According to these bits 15..14 of the second word, |
| * the result character is encoded as follows: |
| * 00 or 01 The result is <=0x1fff and stored in bits 12..0 of |
| * the second word. |
| * 10 The result is 0x2000..0xffff and stored in the third word. |
| * Bits 12..0 of the second word are not used. |
| * 11 The result is a supplementary character. |
| * Bits 9..0 of the leading surrogate are in bits 9..0 of |
| * the second word. |
| * Add 0xd800 to these bits to get the complete surrogate. |
| * Bits 12..10 of the second word are not used. |
| * The trailing surrogate is stored in the third word. |
| * |
| * |
| * - FCD trie |
| * |
| * The FCD trie is very simple. |
| * It is a folded trie with 16-bit data words. |
| * In each word, the high byte contains the leading cc of the character, |
| * and the low byte contains the trailing cc of the character. |
| * These cc's are the cc's of the first and last code points in the |
| * canonical decomposition of the character. |
| * |
| * Since all 16 bits are used for cc's, lead surrogates must be tested |
| * by checking the code unit instead of the trie data. |
| * This is done only if the 16-bit data word is not zero. |
| * If the code unit is a leading surrogate and the data word is not zero, |
| * then instead of cc's it contains the offset for the second trie lookup. |
| * |
| * |
| * - Auxiliary trie and data |
| * |
| * The auxiliary 16-bit trie contains data for additional properties. |
| * Bits |
| * 15..13 reserved |
| * 12 not NFC_Skippable (f) (formatVersion>=2.2) |
| * 11 flag: not a safe starter for canonical closure |
| * 10 composition exclusion |
| * 9.. 0 index into extraData[] to FC_NFKC_Closure string |
| * (not for lead surrogate), |
| * or lead surrogate offset (for lead surrogate, if 9..0 not zero) |
| * |
| * - FC_NFKC_Closure strings in extraData[] |
| * |
| * Strings are either stored as a single code unit or as the length |
| * followed by that many units. |
| * const UChar *s=extraData+(index from auxTrie data bits 9..0); |
| * int32_t length; |
| * if(*s<0xff00) { |
| * // s points to the single-unit string |
| * length=1; |
| * } else { |
| * length=*s&0xff; |
| * ++s; |
| * } |
| * |
| * Conditions for "NF* Skippable" from Mark Davis' com.ibm.text.UCD.NFSkippable: |
| * (used in NormalizerTransliterator) |
| * |
| * A skippable character is |
| * a) unassigned, or ALL of the following: |
| * b) of combining class 0. |
| * c) not decomposed by this normalization form. |
| * AND if NFC or NFKC, |
| * d) can never compose with a previous character. |
| * e) can never compose with a following character. |
| * f) can never change if another character is added. |
| * Example: a-breve might satisfy all but f, but if you |
| * add an ogonek it changes to a-ogonek + breve |
| * |
| * a)..e) must be tested from norm32. |
| * Since f) is more complicated, the (not-)NFC_Skippable flag (f) is built |
| * into the auxiliary trie. |
| * The same bit is used for NFC and NFKC; (c) differs for them. |
| * As usual, we build the "not skippable" flags so that unassigned |
| * code points get a 0 bit. |
| * This bit is only valid after (a)..(e) test FALSE; test NFD_NO before (f) as well. |
| * Test Hangul LV syllables entirely in code. |
| * |
| * |
| * - structure inside canonStartSets[] |
| * |
| * This array maps from code points c to sets of code points (USerializedSet). |
| * The result sets are the code points whose canonical decompositions start |
| * with c. |
| * |
| * canonStartSets[] contains the following sub-arrays: |
| * |
| * indexes[_NORM_SET_INDEX_TOP] |
| * - contains lengths of sub-arrays etc. |
| * |
| * startSets[indexes[_NORM_SET_INDEX_CANON_SETS_LENGTH]-_NORM_SET_INDEX_TOP] |
| * - contains serialized sets (USerializedSet) of canonical starters for |
| * enumerating canonically equivalent strings |
| * indexes[_NORM_SET_INDEX_CANON_SETS_LENGTH] includes _NORM_SET_INDEX_TOP |
| * for details about the structure see uset.c |
| * |
| * bmpTable[indexes[_NORM_SET_INDEX_CANON_BMP_TABLE_LENGTH]] |
| * - a sorted search table for BMP code points whose results are |
| * either indexes to USerializedSets or single code points for |
| * single-code point sets; |
| * each entry is a pair of { code point, result } with result=(binary) yy xxxxxx xxxxxxxx |
| * if yy==01 then there is a USerializedSet at canonStartSets+x |
| * else build a USerializedSet with result as the single code point |
| * |
| * suppTable[indexes[_NORM_SET_INDEX_CANON_SUPP_TABLE_LENGTH]] |
| * - a sorted search table for supplementary code points whose results are |
| * either indexes to USerializedSets or single code points for |
| * single-code point sets; |
| * each entry is a triplet of { high16(cp), low16(cp), result } |
| * each code point's high-word may contain extra data in bits 15..5: |
| * if the high word has bit 15 set, then build a set with a single code point |
| * which is (((high16(cp)&0x1f00)<<8)|result; |
| * else there is a USerializedSet at canonStartSets+result |
| */ |
| |
| #endif /* #if !UCONFIG_NO_NORMALIZATION */ |
| |
| #endif |
