/*
**********************************************************************
*   Copyright (C) 1999-2001, International Business Machines
*   Corporation and others.  All Rights Reserved.
**********************************************************************
*   Date        Name        Description
*   10/20/99    alan        Creation.
**********************************************************************
*/

#include "unicode/uniset.h"
#include "unicode/parsepos.h"
#include "unicode/uchar.h"
#include "unicode/uscript.h"
#include "symtable.h"
#include "cmemory.h"
#include "uhash.h"
#include "util.h"
#include "uvector.h"
#include "uprops.h"
#include "charstr.h"
#include "ustrfmt.h"
#include "mutex.h"
#include "uassert.h"

// HIGH_VALUE > all valid values. 110000 for codepoints
#define UNICODESET_HIGH 0x0110000

// LOW <= all valid values. ZERO for codepoints
#define UNICODESET_LOW 0x000000

// initial storage. Must be >= 0
#define START_EXTRA 16

// extra amount for growth. Must be >= 0
#define GROW_EXTRA START_EXTRA

// Define UChar constants using hex for EBCDIC compatibility
// Used #define to reduce private static exports and memory access time.
#define SET_OPEN        ((UChar)0x005B) /*[*/
#define SET_CLOSE       ((UChar)0x005D) /*]*/
#define HYPHEN          ((UChar)0x002D) /*-*/
#define COMPLEMENT      ((UChar)0x005E) /*^*/
#define COLON           ((UChar)0x003A) /*:*/
#define BACKSLASH       ((UChar)0x005C) /*\*/
#define INTERSECTION    ((UChar)0x0026) /*&*/
#define UPPER_U         ((UChar)0x0055) /*U*/
#define LOWER_U         ((UChar)0x0075) /*u*/
#define OPEN_BRACE      ((UChar)123)    /*{*/
#define CLOSE_BRACE     ((UChar)125)    /*}*/
#define UPPER_P         ((UChar)0x0050) /*P*/
#define UPPER_N         ((UChar)78)     /*N*/
#define EQUALS          ((UChar)0x003D) /*=*/

static const UChar POSIX_OPEN[]  = { 91,58,0 };  // "[:"
static const UChar POSIX_CLOSE[] = { 58,93,0 };  // ":]"
static const UChar PERL_OPEN[]   = { 92,112,0 }; // "\\p"
static const UChar PERL_CLOSE[]  = { 125,0 };    // "}"
static const UChar NAME_OPEN[]   = { 92,78,0 };  // "\\N"

// Special property set IDs
static const char* ANY   = "ANY";   // [\u0000-\U0010FFFF]
static const char* ASCII = "ASCII"; // [\u0000-\u007F]

static const char* NAME_PROP = "na"; // Unicode name property alias

// TEMPORARY: Remove when deprecated category code constructor is removed.
static const UChar CATEGORY_NAMES[] = {
    // Must be kept in sync with uchar.h/UCharCategory
    0x43, 0x6E, /* "Cn" */
    0x4C, 0x75, /* "Lu" */
    0x4C, 0x6C, /* "Ll" */
    0x4C, 0x74, /* "Lt" */
    0x4C, 0x6D, /* "Lm" */
    0x4C, 0x6F, /* "Lo" */
    0x4D, 0x6E, /* "Mn" */
    0x4D, 0x65, /* "Me" */
    0x4D, 0x63, /* "Mc" */
    0x4E, 0x64, /* "Nd" */
    0x4E, 0x6C, /* "Nl" */
    0x4E, 0x6F, /* "No" */
    0x5A, 0x73, /* "Zs" */
    0x5A, 0x6C, /* "Zl" */
    0x5A, 0x70, /* "Zp" */
    0x43, 0x63, /* "Cc" */
    0x43, 0x66, /* "Cf" */
    0x43, 0x6F, /* "Co" */
    0x43, 0x73, /* "Cs" */
    0x50, 0x64, /* "Pd" */
    0x50, 0x73, /* "Ps" */
    0x50, 0x65, /* "Pe" */
    0x50, 0x63, /* "Pc" */
    0x50, 0x6F, /* "Po" */
    0x53, 0x6D, /* "Sm" */
    0x53, 0x63, /* "Sc" */
    0x53, 0x6B, /* "Sk" */
    0x53, 0x6F, /* "So" */
    0x50, 0x69, /* "Pi" */
    0x50, 0x66, /* "Pf" */
    0x00
};

/**
 * Delimiter string used in patterns to close a category reference:
 * ":]".  Example: "[:Lu:]".
 */
static const UChar CATEGORY_CLOSE[] = {COLON, SET_CLOSE, 0x0000}; /* ":]" */

U_NAMESPACE_BEGIN

const char ParsePosition::fgClassID=0;

/**
 * Minimum value that can be stored in a UnicodeSet.
 */
const UChar32 UnicodeSet::MIN_VALUE = UNICODESET_LOW;

/**
 * Maximum value that can be stored in a UnicodeSet.
 */
const UChar32 UnicodeSet::MAX_VALUE = UNICODESET_HIGH - 1;

const char UnicodeSet::fgClassID = 0;

static UnicodeSet* INCLUSIONS = NULL; // cached uprv_getInclusions()

//----------------------------------------------------------------
// Debugging
//----------------------------------------------------------------

// DO NOT DELETE THIS CODE.  This code is used to debug memory leaks.
// To enable the debugging, define the symbol DEBUG_MEM in the line
// below.  This will result in text being sent to stdout that looks
// like this:
//   DEBUG UnicodeSet: ct 0x00A39B20; 397 [\u0A81-\u0A83\u0A85-
//   DEBUG UnicodeSet: dt 0x00A39B20; 396 [\u0A81-\u0A83\u0A85-
// Each line lists a construction (ct) or destruction (dt) event, the
// object address, the number of outstanding objects after the event,
// and the pattern of the object in question.

// #define DEBUG_MEM

#ifdef DEBUG_MEM
#include <stdio.h>
static int32_t _dbgCount = 0;

static inline void _dbgct(UnicodeSet* set) {
    UnicodeString str;
    set->toPattern(str, TRUE);
    char buf[40];
    str.extract(0, 39, buf, "");
    printf("DEBUG UnicodeSet: ct 0x%08X; %d %s\n", set, ++_dbgCount, buf);
}

static inline void _dbgdt(UnicodeSet* set) {
    UnicodeString str;
    set->toPattern(str, TRUE);
    char buf[40];
    str.extract(0, 39, buf, "");
    printf("DEBUG UnicodeSet: dt 0x%08X; %d %s\n", set, --_dbgCount, buf);
}

#else

#define _dbgct(set)
#define _dbgdt(set)

#endif

//----------------------------------------------------------------
// UnicodeString in UVector support
//----------------------------------------------------------------

static void U_CALLCONV cloneUnicodeString(UHashTok *dst, UHashTok *src) {
    dst->pointer = new UnicodeString(*(UnicodeString*)src->pointer);
}

static int8_t U_CALLCONV compareUnicodeString(UHashTok t1, UHashTok t2) {
    const UnicodeString &a = *(const UnicodeString*)t1.pointer;
    const UnicodeString &b = *(const UnicodeString*)t2.pointer;
    return a.compare(b);
}

//----------------------------------------------------------------
// Constructors &c
//----------------------------------------------------------------

/**
 * Constructs an empty set.
 */
UnicodeSet::UnicodeSet() :
    len(1), capacity(1 + START_EXTRA), bufferCapacity(0),
    list(0), buffer(0), strings(0)
{
    list = (UChar32*) uprv_malloc(sizeof(UChar32) * capacity);
    if(list!=NULL){
        list[0] = UNICODESET_HIGH;
    }
    allocateStrings();
    _dbgct(this);
}

/**
 * Constructs a set containing the given range. If <code>end >
 * start</code> then an empty set is created.
 *
 * @param start first character, inclusive, of range
 * @param end last character, inclusive, of range
 */
UnicodeSet::UnicodeSet(UChar32 start, UChar32 end) :
    len(1), capacity(1 + START_EXTRA), bufferCapacity(0),
    list(0), buffer(0), strings(0)
{
    list = (UChar32*) uprv_malloc(sizeof(UChar32) * capacity);
    if(list!=NULL){
        list[0] = UNICODESET_HIGH;
    }
    allocateStrings();
    complement(start, end);
    _dbgct(this);
}

/**
 * Constructs a set from the given pattern, optionally ignoring
 * white space.  See the class description for the syntax of the
 * pattern language.
 * @param pattern a string specifying what characters are in the set
 */
UnicodeSet::UnicodeSet(const UnicodeString& pattern,
                       UErrorCode& status) :
    len(0), capacity(START_EXTRA), bufferCapacity(0),
    list(0), buffer(0), strings(0)
{   
    if(U_SUCCESS(status)){
        list = (UChar32*) uprv_malloc(sizeof(UChar32) * capacity);
        /* test for NULL */
        if(list == NULL) {
            status = U_MEMORY_ALLOCATION_ERROR;  
        }else{
            allocateStrings();
            applyPattern(pattern, status);
        }
    }
    _dbgct(this);
}

// For internal use by RuleBasedTransliterator
UnicodeSet::UnicodeSet(const UnicodeString& pattern, ParsePosition& pos,
                       const SymbolTable& symbols,
                       UErrorCode& status) :
    len(0), capacity(START_EXTRA), bufferCapacity(0),
    list(0), buffer(0), strings(0)
{
    if(U_SUCCESS(status)){
        list = (UChar32*) uprv_malloc(sizeof(UChar32) * capacity);
        /* test for NULL */
        if(list == NULL) {
            status = U_MEMORY_ALLOCATION_ERROR;   
        }else{
            allocateStrings();
            applyPattern(pattern, pos, &symbols, status);
        }
    }
    _dbgct(this);
}

// For internal use by TransliteratorIDParser
UnicodeSet::UnicodeSet(const UnicodeString& pattern, ParsePosition& pos,
                       UErrorCode& status) :
    len(0), capacity(START_EXTRA), bufferCapacity(0),
    list(0), buffer(0), strings(0)
{
    if(U_SUCCESS(status)){
        list = (UChar32*) uprv_malloc(sizeof(UChar32) * capacity);
        /* test for NULL */
        if(list == NULL) {
            status = U_MEMORY_ALLOCATION_ERROR; 
        }else{
            allocateStrings();
            applyPattern(pattern, pos, NULL, status);
        }
    }
    _dbgct(this);
}

/**
 * DEPRECATED Constructs a set from the given Unicode character category.
 * @param category an integer indicating the character category as
 * defined in uchar.h.
 * @deprecated To be removed after 2002-DEC-31
 */
UnicodeSet::UnicodeSet(int8_t category, UErrorCode& status) :
    len(0), capacity(START_EXTRA), bufferCapacity(0),
    list(0), buffer(0), strings(0)
{
    static const UChar OPEN[] = { 91, 58, 0 }; // "[:"
    static const UChar CLOSE[]= { 58, 93, 0 }; // ":]"
    if (U_SUCCESS(status)) {
        if (category < 0 || category >= U_CHAR_CATEGORY_COUNT) {
            status = U_ILLEGAL_ARGUMENT_ERROR;
        } else {
            UnicodeString pattern(FALSE, CATEGORY_NAMES + category*2, 2);
            pattern.insert(0, OPEN);
            pattern.append(CLOSE);
            list = (UChar32*) uprv_malloc(sizeof(UChar32) * capacity);
            /* test for NULL */
            if(list == NULL) {
                status = U_MEMORY_ALLOCATION_ERROR;
            }else{
                allocateStrings();
                applyPattern(pattern, status);
            }
        }
    }
    _dbgct(this);
}

/**
 * Constructs a set that is identical to the given UnicodeSet.
 */
UnicodeSet::UnicodeSet(const UnicodeSet& o) :
    UnicodeFilter(o),
    len(0), capacity(o.len + GROW_EXTRA), bufferCapacity(0),
    list(0), buffer(0), strings(0)
{
    list = (UChar32*) uprv_malloc(sizeof(UChar32) * capacity);
    if(list!=NULL){
        allocateStrings();
        *this = o;
    }
    _dbgct(this);
}

/**
 * Destructs the set.
 */
UnicodeSet::~UnicodeSet() {
    _dbgdt(this); // first!
    uprv_free(list);
    if (buffer) {
        uprv_free(buffer);
    }
    delete strings;
}

/**
 * Assigns this object to be a copy of another.
 */
UnicodeSet& UnicodeSet::operator=(const UnicodeSet& o) {
    ensureCapacity(o.len);
    len = o.len;
    uprv_memcpy(list, o.list, len*sizeof(UChar32));
    UErrorCode ec = U_ZERO_ERROR;
    strings->assign(*o.strings, cloneUnicodeString, ec);
    pat = o.pat;
    return *this;
}

/**
 * Compares the specified object with this set for equality.  Returns
 * <tt>true</tt> if the two sets
 * have the same size, and every member of the specified set is
 * contained in this set (or equivalently, every member of this set is
 * contained in the specified set).
 *
 * @param o set to be compared for equality with this set.
 * @return <tt>true</tt> if the specified set is equal to this set.
 */
UBool UnicodeSet::operator==(const UnicodeSet& o) const {
    if (len != o.len) return FALSE;
    for (int32_t i = 0; i < len; ++i) {
        if (list[i] != o.list[i]) return FALSE;
    }
    if (*strings != *o.strings) return FALSE;
    return TRUE;
}

/**
 * Returns a copy of this object.  All UnicodeMatcher objects have
 * to support cloning in order to allow classes using
 * UnicodeMatchers, such as Transliterator, to implement cloning.
 */
UnicodeFunctor* UnicodeSet::clone() const {
    return new UnicodeSet(*this);
}

/**
 * Returns the hash code value for this set.
 *
 * @return the hash code value for this set.
 * @see Object#hashCode()
 */
int32_t UnicodeSet::hashCode(void) const {
    int32_t result = len;
    for (int32_t i = 0; i < len; ++i) {
        result *= 1000003;
        result += list[i];
    }
    return result;
}

//----------------------------------------------------------------
// Public API
//----------------------------------------------------------------

/**
 * Make this object represent the range <code>start - end</code>.
 * If <code>end > start</code> then this object is set to an
 * an empty range.
 *
 * @param start first character in the set, inclusive
 * @rparam end last character in the set, inclusive
 */
UnicodeSet& UnicodeSet::set(UChar32 start, UChar32 end) {
    clear();
    complement(start, end);
    return *this;
}

/**
 * Modifies this set to represent the set specified by the given
 * pattern, optionally ignoring white space.  See the class
 * description for the syntax of the pattern language.
 * @param pattern a string specifying what characters are in the set
 * @param ignoreSpaces if <code>true</code>, all spaces in the
 * pattern are ignored.  Spaces are those characters for which
 * <code>uprv_isRuleWhiteSpace()</code> is <code>true</code>.
 * Characters preceded by '\\' are escaped, losing any special
 * meaning they otherwise have.  Spaces may be included by
 * escaping them.
 * @exception <code>IllegalArgumentException</code> if the pattern
 * contains a syntax error.
 */
UnicodeSet& UnicodeSet::applyPattern(const UnicodeString& pattern,
                                     UErrorCode& status) {
    if (U_FAILURE(status)) {
        return *this;
    }

    ParsePosition pos(0);
    applyPattern(pattern, pos, NULL, status);
    if (U_FAILURE(status)) return *this;

    // Skip over trailing whitespace
    int32_t i = pos.getIndex();
    int32_t n = pattern.length();
    while (i<n && uprv_isRuleWhiteSpace(pattern.charAt(i))) {
        ++i;
    }

    if (i != n) {
        status = U_ILLEGAL_ARGUMENT_ERROR;
    }
    return *this;
}

/**
 * Return true if the given position, in the given pattern, appears
 * to be the start of a UnicodeSet pattern.
 */
UBool UnicodeSet::resemblesPattern(const UnicodeString& pattern, int32_t pos) {
    return ((pos+1) < pattern.length() &&
            pattern.charAt(pos) == (UChar)91/*[*/) ||
        resemblesPropertyPattern(pattern, pos);
}

/**
 * Append the <code>toPattern()</code> representation of a
 * string to the given <code>StringBuffer</code>.
 */
void UnicodeSet::_appendToPat(UnicodeString& buf, const UnicodeString& s, UBool useHexEscape) {
    UChar32 cp;
    for (int32_t i = 0; i < s.length(); i += UTF_CHAR_LENGTH(cp)) {
        _appendToPat(buf, cp = s.char32At(i), useHexEscape);
    }
}

/**
 * Append the <code>toPattern()</code> representation of a
 * character to the given <code>StringBuffer</code>.
 */
void UnicodeSet::_appendToPat(UnicodeString& buf, UChar32 c, UBool useHexEscape) {
    if (useHexEscape) {
        // Use hex escape notation (\uxxxx or \Uxxxxxxxx) for anything
        // unprintable
        if (ICU_Utility::escapeUnprintable(buf, c)) {
            return;
        }
    }
    // Okay to let ':' pass through
    switch (c) {
    case SET_OPEN:
    case SET_CLOSE:
    case HYPHEN:
    case COMPLEMENT:
    case INTERSECTION:
    case BACKSLASH:
    case 123/*{*/:
    case 125/*}*/:
    case SymbolTable::SYMBOL_REF:
    case COLON:
        buf.append(BACKSLASH);
        break;
    default:
        // Escape whitespace
        if (uprv_isRuleWhiteSpace(c)) {
            buf.append(BACKSLASH);
        }
        break;
    }
    buf.append((UChar) c);
}

/**
 * Returns a string representation of this set.  If the result of
 * calling this function is passed to a UnicodeSet constructor, it
 * will produce another set that is equal to this one.
 */
UnicodeString& UnicodeSet::toPattern(UnicodeString& result,
                                     UBool escapeUnprintable) const {
    result.truncate(0);
    return _toPattern(result, escapeUnprintable);
}

/**
 * Append a string representation of this set to result.  This will be
 * a cleaned version of the string passed to applyPattern(), if there
 * is one.  Otherwise it will be generated.
 */
UnicodeString& UnicodeSet::_toPattern(UnicodeString& result,
                                      UBool escapeUnprintable) const {
    if (pat.length() > 0) {
        int32_t i;
        int32_t backslashCount = 0;
        for (i=0; i<pat.length(); ) {
            UChar32 c = pat.char32At(i);
            i += UTF_CHAR_LENGTH(c);
            if (escapeUnprintable && ICU_Utility::isUnprintable(c)) {
                // If the unprintable character is preceded by an odd
                // number of backslashes, then it has been escaped.
                // Before unescaping it, we delete the final
                // backslash.
                if ((backslashCount % 2) == 1) {
                    result.truncate(result.length() - 1);
                }
                ICU_Utility::escapeUnprintable(result, c);
                backslashCount = 0;
            } else {
                result.append(c);
                if (c == BACKSLASH) {
                    ++backslashCount;
                } else {
                    backslashCount = 0;
                }
            }
        }
        return result;
    }
    
    return _generatePattern(result, escapeUnprintable);
}

/**
 * Generate and append a string representation of this set to result.
 * This does not use this.pat, the cleaned up copy of the string
 * passed to applyPattern().
 */
UnicodeString& UnicodeSet::_generatePattern(UnicodeString& result,
                                            UBool escapeUnprintable) const {
    result.append(SET_OPEN);

//  // Check against the predefined categories.  We implicitly build
//  // up ALL category sets the first time toPattern() is called.
//  for (int8_t cat=0; cat<Unicode::GENERAL_TYPES_COUNT; ++cat) {
//      if (*this == getCategorySet(cat)) {
//          result.append(COLON);
//          result.append(CATEGORY_NAMES, cat*2, 2);
//          return result.append(CATEGORY_CLOSE);
//      }
//  }

    int32_t count = getRangeCount();

    // If the set contains at least 2 intervals and includes both
    // MIN_VALUE and MAX_VALUE, then the inverse representation will
    // be more economical.
    if (count > 1 &&
        getRangeStart(0) == MIN_VALUE &&
        getRangeEnd(count-1) == MAX_VALUE) {

        // Emit the inverse
        result.append(COMPLEMENT);

        for (int32_t i = 1; i < count; ++i) {
            UChar32 start = getRangeEnd(i-1)+1;
            UChar32 end = getRangeStart(i)-1;
            _appendToPat(result, start, escapeUnprintable);
            if (start != end) {
                result.append(HYPHEN);
                _appendToPat(result, end, escapeUnprintable);
            }
        }
    }

    // Default; emit the ranges as pairs
    else {
        for (int32_t i = 0; i < count; ++i) {
            UChar32 start = getRangeStart(i);
            UChar32 end = getRangeEnd(i);
            _appendToPat(result, start, escapeUnprintable);
            if (start != end) {
                result.append(HYPHEN);
                _appendToPat(result, end, escapeUnprintable);
            }
        }
    }
    
    for (int32_t i = 0; i<strings->size(); ++i) {
        result.append(OPEN_BRACE);
        _appendToPat(result,
                     *(const UnicodeString*) strings->elementAt(i),
                     escapeUnprintable);
        result.append(CLOSE_BRACE);
    }
    return result.append(SET_CLOSE);
}

/**
 * Returns the number of elements in this set (its cardinality),
 * <em>n</em>, where <code>0 <= </code><em>n</em><code> <= 65536</code>.
 *
 * @return the number of elements in this set (its cardinality).
 */
int32_t UnicodeSet::size(void) const {
    int32_t n = 0;
    int32_t count = getRangeCount();
    for (int32_t i = 0; i < count; ++i) {
        n += getRangeEnd(i) - getRangeStart(i) + 1;
    }
    return n + strings->size();
}

/**
 * Returns <tt>true</tt> if this set contains no elements.
 *
 * @return <tt>true</tt> if this set contains no elements.
 */
UBool UnicodeSet::isEmpty(void) const {
    return len == 1 && strings->size() == 0;
}

/**
 * Returns true if this set contains the given character.
 * @param c character to be checked for containment
 * @return true if the test condition is met
 */
UBool UnicodeSet::contains(UChar32 c) const {
    // Set i to the index of the start item greater than ch
    // We know we will terminate without length test!
    // LATER: for large sets, add binary search
    //int32_t i = -1;
    //for (;;) {
    //    if (c < list[++i]) break;
    //}
    int32_t i = findCodePoint(c);
    return ((i & 1) != 0); // return true if odd
}

/**
 * Returns the smallest value i such that c < list[i].  Caller
 * must ensure that c is a legal value or this method will enter
 * an infinite loop.  This method performs a binary search.
 * @param c a character in the range MIN_VALUE..MAX_VALUE
 * inclusive
 * @return the smallest integer i in the range 0..len-1,
 * inclusive, such that c < list[i]
 */
int32_t UnicodeSet::findCodePoint(UChar32 c) const {
    /* Examples:
                                       findCodePoint(c)
       set              list[]         c=0 1 3 4 7 8
       ===              ==============   ===========
       []               [110000]         0 0 0 0 0 0
       [\u0000-\u0003]  [0, 4, 110000]   1 1 1 2 2 2
       [\u0004-\u0007]  [4, 8, 110000]   0 0 0 1 1 2
       [:all:]          [0, 110000]      1 1 1 1 1 1
     */

    // Return the smallest i such that c < list[i].  Assume
    // list[len - 1] == HIGH and that c is legal (0..HIGH-1).
    if (c < list[0]) return 0;
    // High runner test.  c is often after the last range, so an
    // initial check for this condition pays off. 
    if (len >= 2 && c >= list[len-2]) return len-1;
    int32_t lo = 0;
    int32_t hi = len - 1;
    // invariant: c >= list[lo]
    // invariant: c < list[hi]
    for (;;) {
        int32_t i = (lo + hi) >> 1;
        if (i == lo) return hi;
        if (c < list[i]) {
            hi = i;
        } else {
            lo = i;
        }
    }
    return 0; // To make compiler happy; never reached
}

/**
 * Returns true if this set contains every character
 * of the given range.
 * @param start first character, inclusive, of the range
 * @param end last character, inclusive, of the range
 * @return true if the test condition is met
 */
UBool UnicodeSet::contains(UChar32 start, UChar32 end) const {
    //int32_t i = -1;
    //for (;;) {
    //    if (start < list[++i]) break;
    //}
    int32_t i = findCodePoint(start);
    return ((i & 1) != 0 && end < list[i]);
}

/**
 * Returns <tt>true</tt> if this set contains the given
 * multicharacter string.
 * @param s string to be checked for containment
 * @return <tt>true</tt> if this set contains the specified string
 */
UBool UnicodeSet::contains(const UnicodeString& s) const {
    if (s.length() == 0) return FALSE;
    int32_t cp = getSingleCP(s);
    if (cp < 0) {
        return strings->contains((void*) &s);
    } else {
        return contains((UChar32) cp);
    }
}

/**
 * Returns true if this set contains all the characters and strings
 * of the given set.
 * @param c set to be checked for containment
 * @return true if the test condition is met
 */
UBool UnicodeSet::containsAll(const UnicodeSet& c) const {
    // The specified set is a subset if all of its pairs are contained in
    // this set.  It's possible to code this more efficiently in terms of
    // direct manipulation of the inversion lists if the need arises.
    int32_t n = c.getRangeCount();
    for (int i=0; i<n; ++i) {
        if (!contains(c.getRangeStart(i), c.getRangeEnd(i))) {
            return FALSE;
        }
    }
    if (!strings->containsAll(*c.strings)) return FALSE;
    return TRUE;
}
    
/**
 * Returns true if this set contains all the characters
 * of the given string.
 * @param s string containing characters to be checked for containment
 * @return true if the test condition is met
 */
UBool UnicodeSet::containsAll(const UnicodeString& s) const {
    UChar32 cp;
    for (int32_t i = 0; i < s.length(); i += UTF_CHAR_LENGTH(cp)) {
        cp = s.char32At(i);
        if (!contains(cp)) return FALSE;
    }
    return TRUE;
}
    
/**
 * Returns true if this set contains none of the characters
 * of the given range.
 * @param start first character, inclusive, of the range
 * @param end last character, inclusive, of the range
 * @return true if the test condition is met
 */
UBool UnicodeSet::containsNone(UChar32 start, UChar32 end) const {
    int32_t i = -1;
    for (;;) {
        if (start < list[++i]) break;
    }
    return ((i & 1) == 0 && end < list[i]);
}

/**
 * Returns true if this set contains none of the characters and strings
 * of the given set.
 * @param c set to be checked for containment
 * @return true if the test condition is met
 */
UBool UnicodeSet::containsNone(const UnicodeSet& c) const {
    // The specified set is a subset if all of its pairs are contained in
    // this set.  It's possible to code this more efficiently in terms of
    // direct manipulation of the inversion lists if the need arises.
    int32_t n = c.getRangeCount();
    for (int32_t i=0; i<n; ++i) {
        if (!containsNone(c.getRangeStart(i), c.getRangeEnd(i))) {
            return FALSE;
        }
    }
    if (!strings->containsNone(*c.strings)) return FALSE;
    return TRUE;
}
    
/**
 * Returns true if this set contains none of the characters
 * of the given string.
 * @param s string containing characters to be checked for containment
 * @return true if the test condition is met
 */
UBool UnicodeSet::containsNone(const UnicodeString& s) const {
    UChar32 cp;
    for (int32_t i = 0; i < s.length(); i += UTF_CHAR_LENGTH(cp)) {
        cp = s.char32At(i);
        if (contains(cp)) return FALSE;
    }
    return TRUE;
}

/**
 * Returns <tt>true</tt> if this set contains any character whose low byte
 * is the given value.  This is used by <tt>RuleBasedTransliterator</tt> for
 * indexing.
 */
UBool UnicodeSet::matchesIndexValue(uint8_t v) const {
    /* The index value v, in the range [0,255], is contained in this set if
     * it is contained in any pair of this set.  Pairs either have the high
     * bytes equal, or unequal.  If the high bytes are equal, then we have
     * aaxx..aayy, where aa is the high byte.  Then v is contained if xx <=
     * v <= yy.  If the high bytes are unequal we have aaxx..bbyy, bb>aa.
     * Then v is contained if xx <= v || v <= yy.  (This is identical to the
     * time zone month containment logic.)
     */
    int32_t i;
    for (i=0; i<getRangeCount(); ++i) {
        UChar32 low = getRangeStart(i);
        UChar32 high = getRangeEnd(i);
        if ((low & ~0xFF) == (high & ~0xFF)) {
            if ((low & 0xFF) <= v && v <= (high & 0xFF)) {
                return TRUE;
            }
        } else if ((low & 0xFF) <= v || v <= (high & 0xFF)) {
            return TRUE;
        }
    }
    if (strings->size() != 0) {
        for (i=0; i<strings->size(); ++i) {
            const UnicodeString& s = *(const UnicodeString*)strings->elementAt(i);
            //if (s.length() == 0) {
            //    // Empty strings match everything
            //    return TRUE;
            //}
            // assert(s.length() != 0); // We enforce this elsewhere
            UChar32 c = s.char32At(0);
            if ((c & 0xFF) == v) {
                return TRUE;
            }
        }
    }
    return FALSE;
}

/**
 * Implementation of UnicodeMatcher::matches().  Always matches the 
 * longest possible multichar string. 
 */
UMatchDegree UnicodeSet::matches(const Replaceable& text,
                                 int32_t& offset,
                                 int32_t limit,
                                 UBool incremental) {
    if (offset == limit) {
        // Strings, if any, have length != 0, so we don't worry
        // about them here.  If we ever allow zero-length strings
        // we much check for them here.
        if (contains(U_ETHER)) {
            return incremental ? U_PARTIAL_MATCH : U_MATCH;
        } else {
            return U_MISMATCH;
        }
    } else {
        if (strings->size() != 0) { // try strings first
            
            // might separate forward and backward loops later
            // for now they are combined

            // TODO Improve efficiency of this, at least in the forward
            // direction, if not in both.  In the forward direction we
            // can assume the strings are sorted.

            int32_t i;
            UBool forward = offset < limit;

            // firstChar is the leftmost char to match in the
            // forward direction or the rightmost char to match in
            // the reverse direction.
            UChar firstChar = text.charAt(offset);

            // If there are multiple strings that can match we
            // return the longest match.
            int32_t highWaterLength = 0;

            for (i=0; i<strings->size(); ++i) {
                const UnicodeString& trial = *(const UnicodeString*)strings->elementAt(i);

                //if (trial.length() == 0) {
                //    return U_MATCH; // null-string always matches
                //}
                // assert(trial.length() != 0); // We ensure this elsewhere

                UChar c = trial.charAt(forward ? 0 : trial.length() - 1);

                // Strings are sorted, so we can optimize in the
                // forward direction.
                if (forward && c > firstChar) break;
                if (c != firstChar) continue;
                        
                int32_t matchLen = matchRest(text, offset, limit, trial);

                if (incremental) {
                    int32_t maxLen = forward ? limit-offset : offset-limit;
                    if (matchLen == maxLen) {
                        // We have successfully matched but only up to limit.
                        return U_PARTIAL_MATCH;
                    }
                }

                if (matchLen == trial.length()) {
                    // We have successfully matched the whole string.
                    if (matchLen > highWaterLength) {
                        highWaterLength = matchLen;
                    }
                    // In the forward direction we know strings
                    // are sorted so we can bail early.
                    if (forward && matchLen < highWaterLength) {
                        break;
                    }
                    continue;
                }
            }

            // We've checked all strings without a partial match.
            // If we have full matches, return the longest one.
            if (highWaterLength != 0) {
                offset += forward ? highWaterLength : -highWaterLength;
                return U_MATCH;
            }
        }
        return UnicodeFilter::matches(text, offset, limit, incremental);
    }
}

/**
 * Returns the longest match for s in text at the given position.
 * If limit > start then match forward from start+1 to limit
 * matching all characters except s.charAt(0).  If limit < start,
 * go backward starting from start-1 matching all characters
 * except s.charAt(s.length()-1).  This method assumes that the
 * first character, text.charAt(start), matches s, so it does not
 * check it.
 * @param text the text to match
 * @param start the first character to match.  In the forward
 * direction, text.charAt(start) is matched against s.charAt(0).
 * In the reverse direction, it is matched against
 * s.charAt(s.length()-1).
 * @param limit the limit offset for matching, either last+1 in
 * the forward direction, or last-1 in the reverse direction,
 * where last is the index of the last character to match.
 * @return If part of s matches up to the limit, return |limit -
 * start|.  If all of s matches before reaching the limit, return
 * s.length().  If there is a mismatch between s and text, return
 * 0
 */
int32_t UnicodeSet::matchRest(const Replaceable& text,
                              int32_t start, int32_t limit,
                              const UnicodeString& s) {
    int32_t i;
    int32_t maxLen;
    int32_t slen = s.length();
    if (start < limit) {
        maxLen = limit - start;
        if (maxLen > slen) maxLen = slen;
        for (i = 1; i < maxLen; ++i) {
            if (text.charAt(start + i) != s.charAt(i)) return 0;
        }
    } else {
        maxLen = start - limit;
        if (maxLen > slen) maxLen = slen;
        --slen; // <=> slen = s.length() - 1;
        for (i = 1; i < maxLen; ++i) {
            if (text.charAt(start - i) != s.charAt(slen - i)) return 0;
        }
    }
    return maxLen;
}

/**
 * Implement of UnicodeMatcher
 */
void UnicodeSet::addMatchSetTo(UnicodeSet& toUnionTo) const {
    toUnionTo.addAll(*this);
}

/**
 * Returns the index of the given character within this set, where
 * the set is ordered by ascending code point.  If the character
 * is not in this set, return -1.  The inverse of this method is
 * <code>charAt()</code>.
 * @return an index from 0..size()-1, or -1
 */
int32_t UnicodeSet::indexOf(UChar32 c) const {
    if (c < MIN_VALUE || c > MAX_VALUE) {
        return -1;
    }
    int32_t i = 0;
    int32_t n = 0;
    for (;;) {
        UChar32 start = list[i++];
        if (c < start) {
            return -1;
        }
        UChar32 limit = list[i++];
        if (c < limit) {
            return n + c - start;
        }
        n += limit - start;
    }
}

/**
 * Returns the character at the given index within this set, where
 * the set is ordered by ascending code point.  If the index is
 * out of range, return (UChar32)-1.  The inverse of this method is
 * <code>indexOf()</code>.
 * @param index an index from 0..size()-1
 * @return the character at the given index, or (UChar32)-1.
 */
UChar32 UnicodeSet::charAt(int32_t index) const {
    if (index >= 0) {
        // len2 is the largest even integer <= len, that is, it is len
        // for even values and len-1 for odd values.  With odd values
        // the last entry is UNICODESET_HIGH.
        int32_t len2 = len & ~1;
        for (int32_t i=0; i < len2;) {
            UChar32 start = list[i++];
            int32_t count = list[i++] - start;
            if (index < count) {
                return (UChar32)(start + index);
            }
            index -= count;
        }
    }
    return (UChar32)-1;
}

/**
 * Adds the specified range to this set if it is not already
 * present.  If this set already contains the specified range,
 * the call leaves this set unchanged.  If <code>end > start</code>
 * then an empty range is added, leaving the set unchanged.
 *
 * @param start first character, inclusive, of range to be added
 * to this set.
 * @param end last character, inclusive, of range to be added
 * to this set.
 */
UnicodeSet& UnicodeSet::add(UChar32 start, UChar32 end) {
    if (start < end) {
        UChar32 range[3] = { start, end+1, UNICODESET_HIGH };
        add(range, 2, 0);
    } else if (start == end) {
        add(start);
    }
    return *this;
}

// #define DEBUG_US_ADD

#ifdef DEBUG_US_ADD
#include <stdio.h>
void dump(UChar32 c) {
    if (c <= 0xFF) {
        printf("%c", (char)c);
    } else {
        printf("U+%04X", c);
    }
}
void dump(const UChar32* list, int32_t len) {
    printf("[");
    for (int32_t i=0; i<len; ++i) {
        if (i != 0) printf(", ");
        dump(list[i]);
    }
    printf("]");
}
#endif

/**
 * Adds the specified character to this set if it is not already
 * present.  If this set already contains the specified character,
 * the call leaves this set unchanged.
 */
UnicodeSet& UnicodeSet::add(UChar32 c) {
    // find smallest i such that c < list[i]
    // if odd, then it is IN the set
    // if even, then it is OUT of the set
    int32_t i = findCodePoint(c);

    // already in set?
    if ((i & 1) != 0) return *this;
    
    // HIGH is 0x110000
    // assert(list[len-1] == HIGH);
    
    // empty = [HIGH]
    // [start_0, limit_0, start_1, limit_1, HIGH]
    
    // [..., start_k-1, limit_k-1, start_k, limit_k, ..., HIGH]
    //                             ^
    //                             list[i]

    // i == 0 means c is before the first range

#ifdef DEBUG_US_ADD
    printf("Add of ");
    dump(c);
    printf(" found at %d", i);
    printf(": ");
    dump(list, len);
    printf(" => ");
#endif

    if (c == list[i]-1) {
        // c is before start of next range
        list[i] = c;
        // if we touched the HIGH mark, then add a new one
        if (c == (UNICODESET_HIGH - 1)) {
            ensureCapacity(len+1);
            list[len++] = UNICODESET_HIGH;
        }
        if (i > 0 && c == list[i-1]) {
            // collapse adjacent ranges

            // [..., start_k-1, c, c, limit_k, ..., HIGH]
            //                     ^
            //                     list[i]

            //for (int32_t k=i-1; k<len-2; ++k) {
            //    list[k] = list[k+2];
            //}
            UChar32* dst = list + i - 1;
            UChar32* src = dst + 2;
            UChar32* srclimit = list + len;
            while (src < srclimit) *(dst++) = *(src++);

            len -= 2;
        }
    }

    else if (i > 0 && c == list[i-1]) {
        // c is after end of prior range
        list[i-1]++;
        // no need to check for collapse here
    }

    else {
        // At this point we know the new char is not adjacent to
        // any existing ranges, and it is not 10FFFF.


        // [..., start_k-1, limit_k-1, start_k, limit_k, ..., HIGH]
        //                             ^
        //                             list[i]

        // [..., start_k-1, limit_k-1, c, c+1, start_k, limit_k, ..., HIGH]
        //                             ^
        //                             list[i]

        ensureCapacity(len+2);

        //for (int32_t k=len-1; k>=i; --k) {
        //    list[k+2] = list[k];
        //}
        UChar32* src = list + len;
        UChar32* dst = src + 2;
        UChar32* srclimit = list + i;
        while (src > srclimit) *(--dst) = *(--src);

        list[i] = c;
        list[i+1] = c+1;
        len += 2;
    }
     
#ifdef DEBUG_US_ADD
    dump(list, len);
    printf("\n");

    for (i=1; i<len; ++i) {
        if (list[i] <= list[i-1]) {
            // Corrupt array!
            printf("ERROR: list has been corrupted\n");
            exit(1);
        }
    } 
#endif
  
    pat.truncate(0);
    return *this;
}

/**
 * Adds the specified multicharacter to this set if it is not already
 * present.  If this set already contains the multicharacter,
 * the call leaves this set unchanged.
 * Thus "ch" => {"ch"}
 * <br><b>Warning: you cannot add an empty string ("") to a UnicodeSet.</b>
 * @param s the source string
 * @return the modified set, for chaining
 */
UnicodeSet& UnicodeSet::add(const UnicodeString& s) {
    if (s.length() == 0) return *this;
    int32_t cp = getSingleCP(s);
    if (cp < 0) {
        if (!strings->contains((void*) &s)) {
            _add(s);
            pat.truncate(0);
        }
    } else {
        add((UChar32)cp, (UChar32)cp);
    }
    return *this;
}

/**
 * Adds the given string, in order, to 'strings'.  The given string
 * must have been checked by the caller to not be empty and to not
 * already be in 'strings'.
 */
void UnicodeSet::_add(const UnicodeString& s) {
    UnicodeString* t = new UnicodeString(s);
    UErrorCode ec = U_ZERO_ERROR;
    strings->sortedInsert(t, compareUnicodeString, ec);
}

/**
 * @return a code point IF the string consists of a single one.
 * otherwise returns -1.
 * @param string to test
 */
int32_t UnicodeSet::getSingleCP(const UnicodeString& s) {
    //if (s.length() < 1) {
    //    throw new IllegalArgumentException("Can't use zero-length strings in UnicodeSet");
    //}
    if (s.length() > 2) return -1;
    if (s.length() == 1) return s.charAt(0);

    // at this point, len = 2
    UChar32 cp = s.char32At(0);
    if (cp > 0xFFFF) { // is surrogate pair
        return cp;
    }
    return -1;
}

/**
 * Adds each of the characters in this string to the set. Thus "ch" => {"c", "h"}
 * If this set already any particular character, it has no effect on that character.
 * @param the source string
 * @return the modified set, for chaining
 */
UnicodeSet& UnicodeSet::addAll(const UnicodeString& s) {
    UChar32 cp;
    for (int32_t i = 0; i < s.length(); i += UTF_CHAR_LENGTH(cp)) {
        cp = s.char32At(i);
        add(cp, cp);
    }
    return *this;
}

/**
 * Retains EACH of the characters in this string. Note: "ch" == {"c", "h"}
 * If this set already any particular character, it has no effect on that character.
 * @param the source string
 * @return the modified set, for chaining
 */
UnicodeSet& UnicodeSet::retainAll(const UnicodeString& s) {
    UnicodeSet set;
    set.addAll(s);
    retainAll(set);
    return *this;
}

/**
 * Complement EACH of the characters in this string. Note: "ch" == {"c", "h"}
 * If this set already any particular character, it has no effect on that character.
 * @param the source string
 * @return the modified set, for chaining
 */
UnicodeSet& UnicodeSet::complementAll(const UnicodeString& s) {
    UnicodeSet set;
    set.addAll(s);
    complementAll(set);
    return *this;
}

/**
 * Remove EACH of the characters in this string. Note: "ch" == {"c", "h"}
 * If this set already any particular character, it has no effect on that character.
 * @param the source string
 * @return the modified set, for chaining
 */
UnicodeSet& UnicodeSet::removeAll(const UnicodeString& s) {
    UnicodeSet set;
    set.addAll(s);
    removeAll(set);
    return *this;
}

/**
 * Makes a set from a multicharacter string. Thus "ch" => {"ch"}
 * <br><b>Warning: you cannot add an empty string ("") to a UnicodeSet.</b>
 * @param the source string
 * @return a newly created set containing the given string
 */
UnicodeSet* UnicodeSet::createFrom(const UnicodeString& s) {
    UnicodeSet *set = new UnicodeSet();
    set->add(s);
    return set;
}


/**
 * Makes a set from each of the characters in the string. Thus "ch" => {"c", "h"}
 * @param the source string
 * @return a newly created set containing the given characters
 */
UnicodeSet* UnicodeSet::createFromAll(const UnicodeString& s) {
    UnicodeSet *set = new UnicodeSet();
    set->addAll(s);
    return set;
}

/**
 * Retain only the elements in this set that are contained in the
 * specified range.  If <code>end > start</code> then an empty range is
 * retained, leaving the set empty.
 *
 * @param start first character, inclusive, of range to be retained
 * to this set.
 * @param end last character, inclusive, of range to be retained
 * to this set.
 */
UnicodeSet& UnicodeSet::retain(UChar32 start, UChar32 end) {
    if (start <= end) {
        UChar32 range[3] = { start, end+1, UNICODESET_HIGH };
        retain(range, 2, 0);
    } else {
        clear();
    }
    return *this;
}

UnicodeSet& UnicodeSet::retain(UChar32 c) {
    return retain(c, c);
}

/**
 * Removes the specified range from this set if it is present.
 * The set will not contain the specified range once the call
 * returns.  If <code>end > start</code> then an empty range is
 * removed, leaving the set unchanged.
 * 
 * @param start first character, inclusive, of range to be removed
 * from this set.
 * @param end last character, inclusive, of range to be removed
 * from this set.
 */
UnicodeSet& UnicodeSet::remove(UChar32 start, UChar32 end) {
    if (start <= end) {
        UChar32 range[3] = { start, end+1, UNICODESET_HIGH };
        retain(range, 2, 2);
    }
    return *this;
}

/**
 * Removes the specified character from this set if it is present.
 * The set will not contain the specified range once the call
 * returns.
 */
UnicodeSet& UnicodeSet::remove(UChar32 c) {
    return remove(c, c);
}

/**
 * Removes the specified string from this set if it is present.
 * The set will not contain the specified character once the call
 * returns.
 * @param the source string
 * @return the modified set, for chaining
 */
UnicodeSet& UnicodeSet::remove(const UnicodeString& s) {
    if (s.length() == 0) return *this;
    int32_t cp = getSingleCP(s);
    if (cp < 0) {
        strings->removeElement((void*) &s);
        pat.truncate(0);
    } else {
        remove((UChar32)cp, (UChar32)cp);
    }
    return *this;
}

/**
 * Complements the specified range in this set.  Any character in
 * the range will be removed if it is in this set, or will be
 * added if it is not in this set.  If <code>end > start</code>
 * then an empty range is xor'ed, leaving the set unchanged.
 *
 * @param start first character, inclusive, of range to be removed
 * from this set.
 * @param end last character, inclusive, of range to be removed
 * from this set.
 */
UnicodeSet& UnicodeSet::complement(UChar32 start, UChar32 end) {
    if (start <= end) {
        UChar32 range[3] = { start, end+1, UNICODESET_HIGH };
        exclusiveOr(range, 2, 0);
    }
    pat.truncate(0);
    return *this;
}

UnicodeSet& UnicodeSet::complement(UChar32 c) {
    return complement(c, c);
}

/**
 * This is equivalent to
 * <code>complement(MIN_VALUE, MAX_VALUE)</code>.
 */
UnicodeSet& UnicodeSet::complement(void) {
    if (list[0] == UNICODESET_LOW) { 
        ensureBufferCapacity(len-1);
        uprv_memcpy(buffer, list + 1, (len-1)*sizeof(UChar32));
        --len;
    } else {
        ensureBufferCapacity(len+1);
        uprv_memcpy(buffer + 1, list, len*sizeof(UChar32));
        buffer[0] = UNICODESET_LOW;
        ++len;
    }
    swapBuffers();
    pat.truncate(0);
    return *this;
}

/**
 * Complement the specified string in this set.
 * The set will not contain the specified string once the call
 * returns.
 * <br><b>Warning: you cannot add an empty string ("") to a UnicodeSet.</b>
 * @param s the string to complement
 * @return this object, for chaining
 */
UnicodeSet& UnicodeSet::complement(const UnicodeString& s) {
    if (s.length() == 0) return *this;
    int32_t cp = getSingleCP(s);
    if (cp < 0) {
        if (strings->contains((void*) &s)) {
            strings->removeElement((void*) &s);
        } else {
            _add(s);
        }
        pat.truncate(0);
    } else {
        complement((UChar32)cp, (UChar32)cp);
    }
    return *this;
}    

/**
 * Adds all of the elements in the specified set to this set if
 * they're not already present.  This operation effectively
 * modifies this set so that its value is the <i>union</i> of the two
 * sets.  The behavior of this operation is unspecified if the specified
 * collection is modified while the operation is in progress.
 *
 * @param c set whose elements are to be added to this set.
 * @see #add(char, char)
 */
UnicodeSet& UnicodeSet::addAll(const UnicodeSet& c) {
    add(c.list, c.len, 0);

    // Add strings in order 
    for (int32_t i=0; i<c.strings->size(); ++i) {
        const UnicodeString* s = (const UnicodeString*)c.strings->elementAt(i);
        if (!strings->contains((void*) s)) {
            _add(*s);
        }
    }
    return *this;
}

/**
 * Retains only the elements in this set that are contained in the
 * specified set.  In other words, removes from this set all of
 * its elements that are not contained in the specified set.  This
 * operation effectively modifies this set so that its value is
 * the <i>intersection</i> of the two sets.
 *
 * @param c set that defines which elements this set will retain.
 */
UnicodeSet& UnicodeSet::retainAll(const UnicodeSet& c) {
    retain(c.list, c.len, 0);
    strings->retainAll(*c.strings);
    return *this;
}

/**
 * Removes from this set all of its elements that are contained in the
 * specified set.  This operation effectively modifies this
 * set so that its value is the <i>asymmetric set difference</i> of
 * the two sets.
 *
 * @param c set that defines which elements will be removed from
 *          this set.
 */
UnicodeSet& UnicodeSet::removeAll(const UnicodeSet& c) {
    retain(c.list, c.len, 2);
    strings->removeAll(*c.strings);
    return *this;
}

/**
 * Complements in this set all elements contained in the specified
 * set.  Any character in the other set will be removed if it is
 * in this set, or will be added if it is not in this set.
 *
 * @param c set that defines which elements will be xor'ed from
 *          this set.
 */
UnicodeSet& UnicodeSet::complementAll(const UnicodeSet& c) {
    exclusiveOr(c.list, c.len, 0);

    for (int32_t i=0; i<c.strings->size(); ++i) {
        void* e = c.strings->elementAt(i);
        if (!strings->removeElement(e)) {
            _add(*(const UnicodeString*)e);
        }
    }
    return *this;
}

/**
 * Removes all of the elements from this set.  This set will be
 * empty after this call returns.
 */
UnicodeSet& UnicodeSet::clear(void) {
    list[0] = UNICODESET_HIGH;
    len = 1;
    pat.truncate(0);
    strings->removeAllElements();
    return *this;
}

/**
 * Iteration method that returns the number of ranges contained in
 * this set.
 * @see #getRangeStart
 * @see #getRangeEnd
 */
int32_t UnicodeSet::getRangeCount() const {
    return len/2;
}

/**
 * Iteration method that returns the first character in the
 * specified range of this set.
 * @see #getRangeCount
 * @see #getRangeEnd
 */
UChar32 UnicodeSet::getRangeStart(int32_t index) const {
    return list[index*2];
}

/**
 * Iteration method that returns the last character in the
 * specified range of this set.
 * @see #getRangeStart
 * @see #getRangeEnd
 */
UChar32 UnicodeSet::getRangeEnd(int32_t index) const {
    return list[index*2 + 1] - 1;
}

int32_t UnicodeSet::getStringCount() const {
    return strings->size();
}

const UnicodeString* UnicodeSet::getString(int32_t index) const {
    return (const UnicodeString*) strings->elementAt(index);
}

/**
 * Reallocate this objects internal structures to take up the least
 * possible space, without changing this object's value.
 */
UnicodeSet& UnicodeSet::compact() {
    if (len != capacity) {
        capacity = len;
        UChar32* temp = (UChar32*) uprv_malloc(sizeof(UChar32) * capacity);
        uprv_memcpy(temp, list, len*sizeof(UChar32));
        uprv_free(list);
        list = temp;
    }
    uprv_free(buffer);
    buffer = NULL;
    return *this;
}

int32_t UnicodeSet::serialize(uint16_t *dest, int32_t destCapacity, UErrorCode& ec) const {
    int32_t bmpLength, length, destLength;

    if (U_FAILURE(ec)) {
        return 0;
    }

    if (destCapacity<0 || (destCapacity>0 && dest==NULL)) {
        ec=U_ILLEGAL_ARGUMENT_ERROR;
        return 0;
    }

    /* count necessary 16-bit units */
    length=this->len-1; // Subtract 1 to ignore final UNICODESET_HIGH
    // assert(length>=0);
    if (length==0) {
        /* empty set */
        if (destCapacity>0) {
            *dest=0;
        } else {
            ec=U_BUFFER_OVERFLOW_ERROR;
        }
        return 1;
    }
    /* now length>0 */

    if (this->list[length-1]<=0xffff) {
        /* all BMP */
        bmpLength=length;
    } else if (this->list[0]>=0x10000) {
        /* all supplementary */
        bmpLength=0;
        length*=2;
    } else {
        /* some BMP, some supplementary */
        for (bmpLength=0; bmpLength<length && this->list[bmpLength]<=0xffff; ++bmpLength) {}
        length=bmpLength+2*(length-bmpLength);
    }

    /* length: number of 16-bit array units */
    if (length>0x7fff) {
        /* there are only 15 bits for the length in the first serialized word */
        ec=U_INDEX_OUTOFBOUNDS_ERROR;
        return 0;
    }

    /*
     * total serialized length:
     * number of 16-bit array units (length) +
     * 1 length unit (always) +
     * 1 bmpLength unit (if there are supplementary values)
     */
    destLength=length+((length>bmpLength)?2:1);
    if (destLength<=destCapacity) {
        const UChar32 *p;
        int32_t i;

        *dest=(uint16_t)length;
        if (length>bmpLength) {
            *dest|=0x8000;
            *++dest=(uint16_t)bmpLength;
        }
        ++dest;

        /* write the BMP part of the array */
        p=this->list;
        for (i=0; i<bmpLength; ++i) {
            *dest++=(uint16_t)*p++;
        }

        /* write the supplementary part of the array */
        for (; i<length; i+=2) {
            *dest++=(uint16_t)(*p>>16);
            *dest++=(uint16_t)*p++;
        }
    } else {
        ec=U_BUFFER_OVERFLOW_ERROR;
    }
    return destLength;
}

//----------------------------------------------------------------
// Implementation: Pattern parsing
//----------------------------------------------------------------

/**
 * Parses the given pattern, starting at the given position.  The
 * character at pattern.charAt(pos.getIndex()) must be '[', or the
 * parse fails.  Parsing continues until the corresponding closing
 * ']'.  If a syntax error is encountered between the opening and
 * closing brace, the parse fails.  Upon return from a successful
 * parse, the ParsePosition is updated to point to the character
 * following the closing ']', and a StringBuffer containing a
 * pairs list for the parsed pattern is returned.  This method calls
 * itself recursively to parse embedded subpatterns.
 *
 * @param pattern the string containing the pattern to be parsed.
 * The portion of the string from pos.getIndex(), which must be a
 * '[', to the corresponding closing ']', is parsed.
 * @param pos upon entry, the position at which to being parsing.
 * The character at pattern.charAt(pos.getIndex()) must be a '['.
 * Upon return from a U_SUCCESSful parse, pos.getIndex() is either
 * the character after the closing ']' of the parsed pattern, or
 * pattern.length() if the closing ']' is the last character of
 * the pattern string.
 * @return a StringBuffer containing a pairs list for the parsed
 * substring of <code>pattern</code>
 * @exception IllegalArgumentException if the parse fails.
 */
void UnicodeSet::applyPattern(const UnicodeString& pattern,
                              ParsePosition& pos,
                              const SymbolTable* symbols,
                              UErrorCode& status) {
    if (U_FAILURE(status)) {
        return;
    }

    // Need to build the pattern in a temporary string because
    // _applyPattern calls add() etc., which set pat to empty.
    UnicodeString rebuiltPat;
    _applyPattern(pattern, pos, symbols, rebuiltPat, status);
    pat = rebuiltPat;
}

void UnicodeSet::_applyPattern(const UnicodeString& pattern,
                               ParsePosition& pos,
                               const SymbolTable* symbols,
                               UnicodeString& rebuiltPat,
                               UErrorCode& status) {

    if (U_FAILURE(status)) {
        return;
    }

    // If the pattern contains any of the following, we save a
    // rebuilt (variable-substituted) copy of the source pattern:
    // - a category
    // - an intersection or subtraction operator
    // - an anchor (trailing '$', indicating RBT ether)
    UBool rebuildPattern = FALSE;
    UnicodeString newPat(SET_OPEN);
    int32_t nestedPatStart = - 1; // see below for usage
    UBool nestedPatDone = FALSE; // see below for usage
    UnicodeString multiCharBuffer;

    UBool invert = FALSE;
    clear();

    const UChar32 NONE = (UChar32) -1;
    UChar32 lastChar = NONE; // This is either a char (0..10FFFF) or NONE
    UBool isLastLiteral = FALSE; // TRUE if lastChar was a literal
    UChar lastOp = 0;

    /* This loop iterates over the characters in the pattern.  We start at
     * the position specified by pos.  We exit the loop when either a
     * matching closing ']' is seen, or we read all characters of the
     * pattern.  In the latter case an error will be thrown.
     */

    /* Pattern syntax:
     *  pat := '[' '^'? elem* ']'
     *  elem := a | a '-' a | set | set op set
     *  set := pat | (a set variable)
     *  op := '&' | '-'
     *  a := (a character, possibly defined by a var)
     */

    // mode 0: No chars parsed yet; next must be '['
    // mode 1: '[' seen; if next is '^' or ':' then special
    // mode 2: '[' '^'? seen; parse pattern and close with ']'
    // mode 3: '[:' seen; parse category and close with ':]'
    // mode 4: ']' seen; parse complete
    // mode 5: Top-level property pattern seen
    int8_t mode = 0;
    int32_t i = pos.getIndex();
    int32_t limit = pattern.length();
    UnicodeSet nestedAux;
    const UnicodeSet* nestedSet; // never owned
    UnicodeString scratch;
    /* In the case of an embedded SymbolTable variable, we look it up and
     * then take characters from the resultant char[] array.  These chars
     * are subjected to an extra level of lookup in the SymbolTable in case
     * they are stand-ins for a nested UnicodeSet.  */
    const UnicodeString* varValueBuffer = NULL;
    int32_t ivarValueBuffer = 0;
    int32_t anchor = 0;
    UChar32 c;
    while (i<limit) {
        /* If the next element is a single character, c will be set to it,
         * and nestedSet will be null.  In this case isLiteral indicates
         * whether the character should assume special meaning if it has
         * one.  If the next element is a nested set, either via a variable
         * reference, or via an embedded "[..]"  or "[:..:]" pattern, then
         * nestedSet will be set to the pairs list for the nested set, and
         * c's value should be ignored.
         */
        nestedSet = NULL;
        UBool isLiteral = FALSE;
        if (varValueBuffer != NULL) {
            if (ivarValueBuffer < varValueBuffer->length()) {
                c = varValueBuffer->char32At(ivarValueBuffer);
                ivarValueBuffer += UTF_CHAR_LENGTH(c);
                const UnicodeFunctor *m = symbols->lookupMatcher(c); // may be NULL
                if (m != NULL && m->getDynamicClassID() != UnicodeSet::getStaticClassID()) {
                    status = U_ILLEGAL_ARGUMENT_ERROR;
                    return;
                }
                nestedSet = (UnicodeSet*) m;
                nestedPatDone = FALSE;
            } else {
                varValueBuffer = NULL;
                c = pattern.char32At(i);
                i += UTF_CHAR_LENGTH(c);
            }
        } else {
            c = pattern.char32At(i);
            i += UTF_CHAR_LENGTH(c);
        }

        if (uprv_isRuleWhiteSpace(c)) {
            continue;
        }

        // Keep track of the count of characters after an alleged anchor
        if (anchor > 0) {
            ++anchor;
        }

        // Parse the opening '[' and optional following '^'
        switch (mode) {
        case 0:
            if (resemblesPropertyPattern(pattern, i-1)) {
                mode = 3;
                break; // Fall through
            } else if (c == SET_OPEN) {
                mode = 1; // Next look for '^' or ':'
                continue;
            } else {
                // throw new IllegalArgumentException("Missing opening '['");
                status = U_ILLEGAL_ARGUMENT_ERROR;
                return;
            }
        case 1:
            mode = 2;
            switch (c) {
            case COMPLEMENT:
                invert = TRUE;
                newPat.append(c);
                continue; // Back to top to fetch next character
            case HYPHEN:
                isLiteral = TRUE; // Treat leading '-' as a literal
                break; // Fall through
            }
            // else fall through and parse this character normally
        }

        // After opening matter is parsed ("[", "[^", or "[:"), the mode
        // will be 2 if we want a closing ']', or 3 if we should parse a
        // category and close with ":]".

        // Only process escapes, variable references, and nested sets
        // if we are _not_ retrieving characters from the variable
        // buffer.  Characters in the variable buffer have already
        // benn through escape and variable reference processing.
        if (varValueBuffer == NULL) {
            /**
             * Handle property set patterns.
             */
            if (resemblesPropertyPattern(pattern, i-1)) {
                ParsePosition pp(i-1);
                nestedAux.applyPropertyPattern(pattern, pp, status);
                if (U_FAILURE(status)) {
                    U_ASSERT(pp.getIndex() == i-1);
                    //throw new IllegalArgumentException("Invalid property pattern " +
                    //                                   pattern.substring(i-1));
                    return;
                }
                nestedSet = &nestedAux;
                nestedPatStart = newPat.length();
                nestedPatDone = TRUE; // we're going to do it just below
                
                switch (lastOp) {
                case HYPHEN:
                case INTERSECTION:
                    newPat.append(lastOp);
                    break;
                }

                // If we have a top-level property pattern, then trim
                // off the opening '[' and use the property pattern
                // as the entire pattern.
                if (mode == 3) {
                    newPat.truncate(0);
                }
                UnicodeString str;
                pattern.extractBetween(i-1, pp.getIndex(), str);
                newPat.append(str);
                rebuildPattern = TRUE;
                
                i = pp.getIndex(); // advance past property pattern
                
                if (mode == 3) {
                    // Entire pattern is a category; leave parse
                    // loop.  This is one of 2 ways we leave this
                    // loop if the pattern is well-formed.
                    *this = nestedAux;
                    mode = 5;
                    break;
                }
            }
            
            /* Handle escapes.  If a character is escaped, then it assumes its
             * literal value.  This is true for all characters, both special
             * characters and characters with no special meaning.  We also
             * interpret '\\uxxxx' Unicode escapes here (as literals).
             */
            else if (c == BACKSLASH) {
                UChar32 escaped = pattern.unescapeAt(i);
                if (escaped == (UChar32) -1) {
                    status = U_ILLEGAL_ARGUMENT_ERROR;
                    return;
                }
                isLiteral = TRUE;
                c = escaped;
            }

            /* Parse variable references.  These are treated as literals.  If a
             * variable refers to a UnicodeSet, its stand in character is
             * returned in the UChar[] buffer.
             * Variable names are only parsed if varNameToChar is not null.
             * Set variables are only looked up if varCharToSet is not null.
             */
            else if (symbols != NULL && !isLiteral && c == SymbolTable::SYMBOL_REF) {
                pos.setIndex(i);
                UnicodeString name = symbols->parseReference(pattern, pos, limit);
                if (name.length() != 0) {
                    varValueBuffer = symbols->lookup(name);
                    if (varValueBuffer == NULL) {
                        //throw new IllegalArgumentException("Undefined variable: "
                        //                                   + name);
                        status = U_ILLEGAL_ARGUMENT_ERROR;
                        return;
                    }
                    ivarValueBuffer = 0;
                    i = pos.getIndex(); // Make i point PAST last char of var name
                } else {
                    // Got a null; this means we have an isolated $.
                    // Tentatively assume this is an anchor.
                    anchor = 1;
                }
                continue; // Back to the top to get varValueBuffer[0]
            }

            /* An opening bracket indicates the first bracket of a nested
             * subpattern.
             */
            else if (!isLiteral && c == SET_OPEN) {
                // Record position before nested pattern
                nestedPatStart = newPat.length();

                // Recurse to get the pairs for this nested set.
                // Backup i to '['.
                pos.setIndex(--i);
                switch (lastOp) {
                case HYPHEN:
                case INTERSECTION:
                    newPat.append(lastOp);
                    break;
                }
                nestedAux._applyPattern(pattern, pos, symbols, newPat, status);
                nestedSet = &nestedAux;
                nestedPatDone =  TRUE;
                if (U_FAILURE(status)) {
                    return;
                }
                i = pos.getIndex();
            }

            else if (!isLiteral && c == OPEN_BRACE) {
                // start of a string. find the rest.
                int32_t length = 0;
                int32_t st = i;
                multiCharBuffer.truncate(0);
                while (i < pattern.length()) {
                    UChar32 ch = pattern.char32At(i);
                    i += UTF_CHAR_LENGTH(ch); 
                    if (ch == CLOSE_BRACE) {
                        length = -length; // signal that we saw '}'
                        break;
                    } else if (ch == BACKSLASH) {
                        ch = pattern.unescapeAt(i);
                        if (ch == (UChar32) -1) {
                            status = U_ILLEGAL_ARGUMENT_ERROR;
                            return;
                        }
                    }
                    --length; // sic; see above
                    multiCharBuffer.append(ch);
                }
                if (length < 1) {
                    status = U_ILLEGAL_ARGUMENT_ERROR;
                    return;
                }
                // We have new string. Add it to set and continue;
                // we don't need to drop through to the further
                // processing
                add(multiCharBuffer);
                pattern.extractBetween(st, i, multiCharBuffer);
                newPat.append(OPEN_BRACE).append(multiCharBuffer);
                rebuildPattern = TRUE;
                continue;
            }
        }

        /* At this point we have either a character c, or a nested set.  If
         * we have encountered a nested set, either embedded in the pattern,
         * or as a variable, we have a non-null nestedSet, and c should be
         * ignored.  Otherwise c is the current character, and isLiteral
         * indicates whether it is an escaped literal (or variable) or a
         * normal unescaped character.  Unescaped characters '-', '&', and
         * ']' have special meanings.
         */
        if (nestedSet != NULL) {
            if (lastChar != NONE) {
                if (lastOp != 0) {
                    // throw new IllegalArgumentException("Illegal rhs for " + lastChar + lastOp);
                    status = U_ILLEGAL_ARGUMENT_ERROR;
                    return;
                }
                add(lastChar, lastChar);
                if (nestedPatDone) {
                    // If there was a character before the nested set,
                    // then we need to insert it in newPat before the
                    // pattern for the nested set.  This position was
                    // recorded in nestedPatStart.
                    UnicodeString s;
                    _appendToPat(s, lastChar, FALSE);
                    newPat.insert(nestedPatStart, s);
                } else {
                    _appendToPat(newPat, lastChar, FALSE);
                }
                lastChar = NONE;
            }
            switch (lastOp) {
            case HYPHEN:
                removeAll(*nestedSet);
                break;
            case INTERSECTION:
                retainAll(*nestedSet);
                break;
            case 0:
                addAll(*nestedSet);
                break;
            }

            // Get the pattern for the nested set, if we haven't done so
            // already.
            if (!nestedPatDone) {
                if (lastOp != 0) {
                    newPat.append(lastOp);
                }
                nestedSet->_toPattern(newPat, FALSE);
            }
            rebuildPattern = TRUE;

            lastOp = 0;

        } else if (!isLiteral && c == SET_CLOSE) {
            // Final closing delimiter.  This is one of 2 ways we
            // leave this loop if the pattern is well-formed.
            if (anchor > 2 || anchor == 1) {
                //throw new IllegalArgumentException("Syntax error near $" + pattern);
                status = U_ILLEGAL_ARGUMENT_ERROR;
                return;
            }
            if (anchor == 2) {
                rebuildPattern = TRUE;
                newPat.append((UChar)SymbolTable::SYMBOL_REF);
                add(U_ETHER);
            }
            mode = 4;
            break;
        } else if (lastOp == 0 && !isLiteral && (c == HYPHEN || c == INTERSECTION)) {
            // assert(c <= 0xFFFF);
            lastOp = (UChar) c;
        } else if (lastOp == HYPHEN) {
            if (lastChar >= c) {
                // Don't allow redundant (a-a) or empty (b-a) ranges;
                // these are most likely typos.
                //throw new IllegalArgumentException("Invalid range " + lastChar +
                //                                       '-' + c);
                status = U_ILLEGAL_ARGUMENT_ERROR;
                return;
            }
            add(lastChar, c);
            _appendToPat(newPat, lastChar, FALSE);
            newPat.append(HYPHEN);
            _appendToPat(newPat, c, FALSE);
            lastOp = 0;
            lastChar = NONE;
        } else if (lastOp != 0) {
            // We have <set>&<char> or <char>&<char>
            // throw new IllegalArgumentException("Unquoted " + lastOp);
            status = U_ILLEGAL_ARGUMENT_ERROR;
            return;
        } else {
            if (lastChar != NONE) {
                // We have <char><char>
                add(lastChar, lastChar);
                _appendToPat(newPat, lastChar, FALSE);
            }
            lastChar = c;
            isLastLiteral = isLiteral;
        }
    }

    if (mode < 4) {
        // throw new IllegalArgumentException("Missing ']'");
        status = U_ILLEGAL_ARGUMENT_ERROR;
        return;
    }

    // Treat a trailing '$' as indicating U_ETHER.  This code is only
    // executed if symbols == NULL; otherwise other code parses the
    // anchor.
    if (lastChar == (UChar)SymbolTable::SYMBOL_REF && !isLastLiteral) {
        rebuildPattern = TRUE;
        newPat.append(lastChar);
        add(U_ETHER);
    }

    else if (lastChar != NONE) {
        add(lastChar, lastChar);
        _appendToPat(newPat, lastChar, FALSE);
    }

    // Handle unprocessed stuff preceding the closing ']'
    if (lastOp == HYPHEN) {
        // Trailing '-' is treated as literal
        add(lastOp, lastOp);
        newPat.append(HYPHEN);
    } else if (lastOp == INTERSECTION) {
        // throw new IllegalArgumentException("Unquoted trailing " + lastOp);
        status = U_ILLEGAL_ARGUMENT_ERROR;
        return;
    }

    if (mode == 4) {
        newPat.append(SET_CLOSE);
    }

    /**
     * If we saw a '^' after the initial '[' of this pattern, then perform
     * the complement.  (Inversion after '[:' is handled elsewhere.)
     */
    if (invert) {
        complement();
    }

    pos.setIndex(i);

    // Use the rebuilt pattern (newPat) only if necessary.  Prefer the
    // generated pattern.
    if (rebuildPattern) {
        rebuiltPat.append(newPat);
    } else {
        _generatePattern(rebuiltPat, FALSE);
    }
}

//----------------------------------------------------------------
// Implementation: Utility methods
//----------------------------------------------------------------

/**
 * Allocate our strings vector and return TRUE if successful.
 */
UBool UnicodeSet::allocateStrings() {
    UErrorCode ec = U_ZERO_ERROR;
    strings = new UVector(uhash_deleteUnicodeString,
                          uhash_compareUnicodeString, ec);
    if (U_FAILURE(ec)) {
        delete strings;
        strings = NULL;
        return FALSE;
    }
    return TRUE;
}

void UnicodeSet::ensureCapacity(int32_t newLen) {
    if (newLen <= capacity)
        return;
    capacity = newLen + GROW_EXTRA;
    UChar32* temp = (UChar32*) uprv_malloc(sizeof(UChar32) * capacity);
    uprv_memcpy(temp, list, len*sizeof(UChar32));
    uprv_free(list);
    list = temp;
}

void UnicodeSet::ensureBufferCapacity(int32_t newLen) {
    if (buffer != NULL && newLen <= bufferCapacity)
        return;
    if (buffer) {
        uprv_free(buffer);
    }
    bufferCapacity = newLen + GROW_EXTRA;
    buffer = (UChar32*) uprv_malloc(sizeof(UChar32) * bufferCapacity);
}

/**
 * Swap list and buffer.
 */
void UnicodeSet::swapBuffers(void) {
    // swap list and buffer
    UChar32* temp = list;
    list = buffer;
    buffer = temp;

    int32_t c = capacity;
    capacity = bufferCapacity;
    bufferCapacity = c;
}

//----------------------------------------------------------------
// Implementation: Fundamental operators
//----------------------------------------------------------------

static inline UChar32 max(UChar32 a, UChar32 b) {
    return (a > b) ? a : b;
}

// polarity = 0, 3 is normal: x xor y
// polarity = 1, 2: x xor ~y == x === y

void UnicodeSet::exclusiveOr(const UChar32* other, int32_t otherLen, int8_t polarity) {
    ensureBufferCapacity(len + otherLen);
    int32_t i = 0, j = 0, k = 0;
    UChar32 a = list[i++];
    UChar32 b;
    if (polarity == 1 || polarity == 2) {
        b = UNICODESET_LOW;
        if (other[j] == UNICODESET_LOW) { // skip base if already LOW
            ++j;
            b = other[j];
        }
    } else {
        b = other[j++];
    }
    // simplest of all the routines
    // sort the values, discarding identicals!
    for (;;) {
        if (a < b) {
            buffer[k++] = a;
            a = list[i++];
        } else if (b < a) {
            buffer[k++] = b;
            b = other[j++];
        } else if (a != UNICODESET_HIGH) { // at this point, a == b
            // discard both values!
            a = list[i++];
            b = other[j++];
        } else { // DONE!
            buffer[k++] = UNICODESET_HIGH;
            len = k;
            break;
        }
    }
    swapBuffers();
    pat.truncate(0);
}

// polarity = 0 is normal: x union y
// polarity = 2: x union ~y
// polarity = 1: ~x union y
// polarity = 3: ~x union ~y

void UnicodeSet::add(const UChar32* other, int32_t otherLen, int8_t polarity) {
    ensureBufferCapacity(len + otherLen);
    int32_t i = 0, j = 0, k = 0;
    UChar32 a = list[i++];
    UChar32 b = other[j++];
    // change from xor is that we have to check overlapping pairs
    // polarity bit 1 means a is second, bit 2 means b is.
    for (;;) {
        switch (polarity) {
          case 0: // both first; take lower if unequal
            if (a < b) { // take a
                // Back up over overlapping ranges in buffer[]
                if (k > 0 && a <= buffer[k-1]) {
                    // Pick latter end value in buffer[] vs. list[]
                    a = max(list[i], buffer[--k]);
                } else {
                    // No overlap
                    buffer[k++] = a;
                    a = list[i];
                }
                i++; // Common if/else code factored out
                polarity ^= 1;
            } else if (b < a) { // take b
                if (k > 0 && b <= buffer[k-1]) {
                    b = max(other[j], buffer[--k]);
                } else {
                    buffer[k++] = b;
                    b = other[j];
                }
                j++;
                polarity ^= 2;
            } else { // a == b, take a, drop b
                if (a == UNICODESET_HIGH) goto loop_end;
                // This is symmetrical; it doesn't matter if
                // we backtrack with a or b. - liu
                if (k > 0 && a <= buffer[k-1]) {
                    a = max(list[i], buffer[--k]);
                } else {
                    // No overlap
                    buffer[k++] = a;
                    a = list[i];
                }
                i++;
                polarity ^= 1;
                b = other[j++];
                polarity ^= 2;
            }
            break;
          case 3: // both second; take higher if unequal, and drop other
            if (b <= a) { // take a
                if (a == UNICODESET_HIGH) goto loop_end;
                buffer[k++] = a;
            } else { // take b
                if (b == UNICODESET_HIGH) goto loop_end;
                buffer[k++] = b;
            }
            a = list[i++];
            polarity ^= 1;   // factored common code
            b = other[j++];
            polarity ^= 2;
            break;
          case 1: // a second, b first; if b < a, overlap
            if (a < b) { // no overlap, take a
                buffer[k++] = a; a = list[i++]; polarity ^= 1;
            } else if (b < a) { // OVERLAP, drop b
                b = other[j++];
                polarity ^= 2;
            } else { // a == b, drop both!
                if (a == UNICODESET_HIGH) goto loop_end;
                a = list[i++];
                polarity ^= 1;
                b = other[j++];
                polarity ^= 2;
            }
            break;
          case 2: // a first, b second; if a < b, overlap
            if (b < a) { // no overlap, take b
                buffer[k++] = b;
                b = other[j++];
                polarity ^= 2;
            } else  if (a < b) { // OVERLAP, drop a
                a = list[i++];
                polarity ^= 1;
            } else { // a == b, drop both!
                if (a == UNICODESET_HIGH) goto loop_end;
                a = list[i++];
                polarity ^= 1;
                b = other[j++];
                polarity ^= 2;
            }
            break;
        }
    }
 loop_end:
    buffer[k++] = UNICODESET_HIGH;    // terminate
    len = k;
    swapBuffers();
    pat.truncate(0);
}

// polarity = 0 is normal: x intersect y
// polarity = 2: x intersect ~y == set-minus
// polarity = 1: ~x intersect y
// polarity = 3: ~x intersect ~y

void UnicodeSet::retain(const UChar32* other, int32_t otherLen, int8_t polarity) {
    ensureBufferCapacity(len + otherLen);
    int32_t i = 0, j = 0, k = 0;
    UChar32 a = list[i++];
    UChar32 b = other[j++];
    // change from xor is that we have to check overlapping pairs
    // polarity bit 1 means a is second, bit 2 means b is.
    for (;;) {
        switch (polarity) {
          case 0: // both first; drop the smaller
            if (a < b) { // drop a
                a = list[i++];
                polarity ^= 1;
            } else if (b < a) { // drop b
                b = other[j++];
                polarity ^= 2;
            } else { // a == b, take one, drop other
                if (a == UNICODESET_HIGH) goto loop_end;
                buffer[k++] = a;
                a = list[i++];
                polarity ^= 1;
                b = other[j++];
                polarity ^= 2;
            }
            break;
          case 3: // both second; take lower if unequal
            if (a < b) { // take a
                buffer[k++] = a;
                a = list[i++];
                polarity ^= 1;
            } else if (b < a) { // take b
                buffer[k++] = b;
                b = other[j++];
                polarity ^= 2;
            } else { // a == b, take one, drop other
                if (a == UNICODESET_HIGH) goto loop_end;
                buffer[k++] = a;
                a = list[i++];
                polarity ^= 1;
                b = other[j++];
                polarity ^= 2;
            }
            break;
          case 1: // a second, b first;
            if (a < b) { // NO OVERLAP, drop a
                a = list[i++];
                polarity ^= 1;
            } else if (b < a) { // OVERLAP, take b
                buffer[k++] = b;
                b = other[j++];
                polarity ^= 2;
            } else { // a == b, drop both!
                if (a == UNICODESET_HIGH) goto loop_end;
                a = list[i++];
                polarity ^= 1;
                b = other[j++];
                polarity ^= 2;
            }
            break;
          case 2: // a first, b second; if a < b, overlap
            if (b < a) { // no overlap, drop b
                b = other[j++];
                polarity ^= 2;
            } else  if (a < b) { // OVERLAP, take a
                buffer[k++] = a;
                a = list[i++];
                polarity ^= 1;
            } else { // a == b, drop both!
                if (a == UNICODESET_HIGH) goto loop_end;
                a = list[i++];
                polarity ^= 1;
                b = other[j++];
                polarity ^= 2;
            }
            break;
        }
    }
 loop_end:
    buffer[k++] = UNICODESET_HIGH;    // terminate
    len = k;
    swapBuffers();
    pat.truncate(0);
}

//----------------------------------------------------------------
// Property set implementation
//----------------------------------------------------------------

static UBool numericValueFilter(UChar32 ch, void* context) {
    return u_getNumericValue(ch) == *(double*)context;
}

static UBool generalCategoryMaskFilter(UChar32 ch, void* context) {
    int32_t value = *(int32_t*)context;
    return (U_GET_GC_MASK((UChar32) ch) & value) != 0;
}

typedef struct {
    UProperty prop;
    int32_t value;
} IntPropertyContext;

static UBool intPropertyFilter(UChar32 ch, void* context) {
    IntPropertyContext* c = (IntPropertyContext*)context;
    return u_getIntPropertyValue((UChar32) ch, c->prop) == c->value;
}


/**
 * Generic filter-based scanning code for UCD property UnicodeSets.
 */
void UnicodeSet::applyFilter(UnicodeSet::Filter filter,
                             void* context,
                             UErrorCode &status) {
    // Walk through all Unicode characters, noting the start
    // and end of each range for which filter.contain(c) is
    // true.  Add each range to a set.
    //
    // To improve performance, use the INCLUSIONS set, which
    // encodes information about character ranges that are known
    // to have identical properties. INCLUSIONS contains
    // only the first characters of such ranges.
    //
    // TODO Where possible, instead of scanning over code points,
    // use internal property data to initialize UnicodeSets for
    // those properties.  Scanning code points is slow.
    if (U_FAILURE(status)) return;

    const UnicodeSet* inclusions = getInclusions();
    if (inclusions == NULL) {
        status = U_INTERNAL_PROGRAM_ERROR;
        return;
    }

    clear();

    UChar32 startHasProperty = -1;
    int limitRange = inclusions->getRangeCount();

    for (int j=0; j<limitRange; ++j) {
        // get current range
        UChar32 start = inclusions->getRangeStart(j);
        UChar32 end = inclusions->getRangeEnd(j);

        // for all the code points in the range, process
        for (UChar32 ch = start; ch <= end; ++ch) {
            // only add to this UnicodeSet on inflection points --
            // where the hasProperty value changes to false
            if ((*filter)(ch, context)) {
                if (startHasProperty < 0) {
                    startHasProperty = ch;
                }
            } else if (startHasProperty >= 0) {
                add(startHasProperty, ch-1);
                startHasProperty = -1;
            }
        }
    }
    if (startHasProperty >= 0) {
        add((UChar32)startHasProperty, (UChar32)0x10FFFF);
    }
}

UBool mungeCharName(char* dst, const char* src, int32_t dstCapacity) {
    /* Note: we use ' ' in compiler code page */
    int32_t j = 0;
    char ch;
    --dstCapacity; /* make room for term. zero */
    while ((ch = *src++) != 0) {
        if (ch == ' ' && (j==0 || (j>0 && dst[j-1]==' '))) {
            continue;
        }
        if (j >= dstCapacity) return FALSE;
        dst[j++] = ch;
    }
    if (j > 0 && dst[j-1] == ' ') --j;
    dst[j] = 0;
    return TRUE;
}

//----------------------------------------------------------------
// Property set API
//----------------------------------------------------------------

#define FAIL(ec) {ec=U_ILLEGAL_ARGUMENT_ERROR; return *this;}

UnicodeSet&
UnicodeSet::applyIntPropertyValue(UProperty prop, int32_t value, UErrorCode& ec) {
    if (U_FAILURE(ec)) return *this;

    if (prop == UCHAR_GENERAL_CATEGORY_MASK) {
        applyFilter(generalCategoryMaskFilter, &value, ec);
    } else {
        IntPropertyContext c = {prop, value};
        applyFilter(intPropertyFilter, &c, ec);
    }
    return *this;
}

UnicodeSet&
UnicodeSet::applyPropertyAlias(const UnicodeString& prop,
                               const UnicodeString& value,
                               UErrorCode& ec) {
    if (U_FAILURE(ec)) return *this;

    UProperty p;
    int32_t v;
    CharString pname(prop);
    CharString vname(value);
    UBool mustNotBeEmpty = FALSE;

    if (value.length() > 0) {
        p = u_getPropertyEnum(pname);
        if (p == UCHAR_INVALID_CODE) FAIL(ec);

        // Treat gc as gcm
        if (p == UCHAR_GENERAL_CATEGORY) {
            p = UCHAR_GENERAL_CATEGORY_MASK;
        }

        if ((p >= UCHAR_BINARY_START && p < UCHAR_BINARY_LIMIT) ||
            (p >= UCHAR_INT_START && p < UCHAR_INT_LIMIT) ||
            (p >= UCHAR_MASK_START && p < UCHAR_MASK_LIMIT)) {
            v = u_getPropertyValueEnum(p, vname);
            if (v == UCHAR_INVALID_CODE) {
                // Handle numeric CCC
                if (p == UCHAR_CANONICAL_COMBINING_CLASS) {
                    char* end;
                    double value = uprv_strtod(vname, &end);
                    v = (int32_t) value;
                    if (v != value || v < 0 || *end != 0) {
                        // non-integral or negative value, or trailing junk
                        FAIL(ec);
                    }
                    // If the resultant set is empty then the numeric value
                    // was invalid.
                    mustNotBeEmpty = TRUE;
                } else {
                    FAIL(ec);
                }
            }
        }

        else {

            switch (p) {
            case UCHAR_NUMERIC_VALUE:
                {
                    char* end;
                    double value = uprv_strtod(vname, &end);
                    if (*end != 0) {
                        FAIL(ec);
                    }
                    applyFilter(numericValueFilter, &value, ec);
                    return *this;
                }
                break;
            case UCHAR_NAME:
            case UCHAR_UNICODE_1_NAME:
                {
                    // Must munge name, since u_charFromName() does not do
                    // 'loose' matching.
                    char buf[128]; // it suffices that this be > uprv_getMaxCharNameLength
                    if (!mungeCharName(buf, vname, sizeof(buf))) FAIL(ec);
                    UCharNameChoice choice = (p == UCHAR_NAME) ?
                        U_EXTENDED_CHAR_NAME : U_UNICODE_10_CHAR_NAME;
                    UChar32 ch = u_charFromName(choice, buf, &ec);
                    if (U_SUCCESS(ec)) {
                        clear();
                        add(ch);
                        return *this;
                    } else {
                        FAIL(ec);
                    }
                }
                break;
            }

            // p is a non-binary, non-enumerated property that we
            // don't support (yet).
            FAIL(ec);
        }
    }

    else {
        // value is empty.  Interpret as General Category, Script, or
        // Binary property.
        p = UCHAR_GENERAL_CATEGORY_MASK;
        v = u_getPropertyValueEnum(p, pname);
        if (v == UCHAR_INVALID_CODE) {
            p = UCHAR_SCRIPT;
            v = u_getPropertyValueEnum(p, pname);
            if (v == UCHAR_INVALID_CODE) {
                p = u_getPropertyEnum(pname);
                if (p >= UCHAR_BINARY_START && p < UCHAR_BINARY_LIMIT) {
                    v = 1;
                } else if (0 == uprv_comparePropertyNames(ANY, pname)) {
                    set(MIN_VALUE, MAX_VALUE);
                    return *this;
                } else if (0 == uprv_comparePropertyNames(ASCII, pname)) {
                    set(0, 0x7F);
                    return *this;
                } else {
                    FAIL(ec);
                }
            }
        }
    }
    
    applyIntPropertyValue(p, v, ec);

    if (U_SUCCESS(ec) && (mustNotBeEmpty && isEmpty())) {
        // mustNotBeEmpty is set to true if an empty set indicates
        // invalid input.
        ec = U_ILLEGAL_ARGUMENT_ERROR;
    }

    return *this;
}

//----------------------------------------------------------------
// Property set patterns
//----------------------------------------------------------------

/**
 * Return true if the given position, in the given pattern, appears
 * to be the start of a property set pattern.
 */
UBool UnicodeSet::resemblesPropertyPattern(const UnicodeString& pattern,
                                           int32_t pos) {
    // Patterns are at least 5 characters long
    if ((pos+5) > pattern.length()) {
        return FALSE;
    }

    // Look for an opening [:, [:^, \p, or \P
    return (0 == pattern.compare(pos, 2, POSIX_OPEN)) ||
        (0 == pattern.caseCompare(pos, 2, PERL_OPEN, U_FOLD_CASE_DEFAULT)) ||
        (0 == pattern.compare(pos, 2, NAME_OPEN));
}

/**
 * Parse the given property pattern at the given parse position.
 */
UnicodeSet& UnicodeSet::applyPropertyPattern(const UnicodeString& pattern,
                                             ParsePosition& ppos,
                                             UErrorCode &ec) {
    int32_t pos = ppos.getIndex();

    UBool posix = FALSE; // true for [:pat:], false for \p{pat} \P{pat} \N{pat}
    UBool isName = FALSE; // true for \N{pat}, o/w false
    UBool invert = FALSE;

    if (U_FAILURE(ec)) return *this;

    // Minimum length is 5 characters, e.g. \p{L}
    if ((pos+5) > pattern.length()) {
        FAIL(ec);
    }

    // On entry, ppos should point to one of the following locations:
    // Look for an opening [:, [:^, \p, or \P
    if (0 == pattern.compare(pos, 2, POSIX_OPEN)) {
        posix = TRUE;
        pos += 2;
        pos = ICU_Utility::skipWhitespace(pattern, pos);
        if (pos < pattern.length() && pattern.charAt(pos) == COMPLEMENT) {
            ++pos;
            invert = TRUE;
        }
    } else if (0 == pattern.caseCompare(pos, 2, PERL_OPEN, U_FOLD_CASE_DEFAULT) ||
               0 == pattern.compare(pos, 2, NAME_OPEN)) {
        UChar c = pattern.charAt(pos+1);
        invert = (c == UPPER_P);
        isName = (c == UPPER_N);
        pos += 2;
        pos = ICU_Utility::skipWhitespace(pattern, pos);
        if (pos == pattern.length() || pattern.charAt(pos++) != OPEN_BRACE) {
            // Syntax error; "\p" or "\P" not followed by "{"
            FAIL(ec);
        }
    } else {
        // Open delimiter not seen
        FAIL(ec);
    }

    // Look for the matching close delimiter, either :] or }
    int32_t close = pattern.indexOf(posix ? POSIX_CLOSE : PERL_CLOSE, pos);
    if (close < 0) {
        // Syntax error; close delimiter missing
        FAIL(ec);
    }

    // Look for an '=' sign.  If this is present, we will parse a
    // medium \p{gc=Cf} or long \p{GeneralCategory=Format}
    // pattern.
    int32_t equals = pattern.indexOf(EQUALS, pos);
    UnicodeString propName, valueName;
    if (equals >= 0 && equals < close && !isName) {
        // Equals seen; parse medium/long pattern
        pattern.extractBetween(pos, equals, propName);
        pattern.extractBetween(equals+1, close, valueName);
    }

    else {
        // Handle case where no '=' is seen, and \N{}
        pattern.extractBetween(pos, close, propName);
            
        // Handle \N{name}
        if (isName) {
            // This is a little inefficient since it means we have to
            // parse NAME_PROP back to UCHAR_NAME even though we already
            // know it's UCHAR_NAME.  If we refactor the API to
            // support args of (UProperty, char*) then we can remove
            // NAME_PROP and make this a little more efficient.
            valueName = propName;
            propName = NAME_PROP;
        }
    }

    applyPropertyAlias(propName, valueName, ec);

    if (U_SUCCESS(ec)) {
        if (invert) {
            complement();
        }
            
        // Move to the limit position after the close delimiter if the
        // parse succeeded.
        ppos.setIndex(close + (posix ? 2 : 1));
    }

    return *this;
}

//----------------------------------------------------------------
// Inclusions list
//----------------------------------------------------------------

const UnicodeSet* UnicodeSet::getInclusions() {
    if (INCLUSIONS == NULL) {
        UnicodeSet *incl = new UnicodeSet();
        uprv_getInclusions((USet *)incl);
        umtx_lock(NULL);
        if (INCLUSIONS == NULL) {
            INCLUSIONS = incl;
            incl = NULL;
        }
        umtx_unlock(NULL);
        if(incl != NULL) {
            delete incl;
        }
    }
    return INCLUSIONS;
}

/**
 * Cleanup function for UnicodeSet
 */
U_CFUNC UBool uset_cleanup(void) {
    if (INCLUSIONS != NULL) {
        delete INCLUSIONS;
        INCLUSIONS = NULL;
    }
    return TRUE;
}

U_NAMESPACE_END