source/tools/Makefile.in

## Makefile.in for ICU tools
## Copyright (c) 1999-2000, International Business Machines Corporation and
## others. All Rights Reserved.

## Shell to use
SHELL = @SHELL@
VERSION = @VERSION@

## Install directory information
srcdir = @srcdir@
top_srcdir = @top_srcdir@
prefix = @prefix@
exec_prefix = @exec_prefix@

CC = @CC@
CXX = @CXX@

CPPFLAGS = @CPPFLAGS@ -I$(top_srcdir)/common -I$(top_builddir)/common
CFLAGS = @CFLAGS@
CXXFLAGS = @CXXFLAGS@


@host_frag@

bindir = @bindir@
sbindir = @sbindir@
datadir = @datadir@
libdir = @libdir@
includedir = @includedir@

pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@

## Build directory information
top_builddir = ..
subdir = tools

# OBJDATADIR must be a short path (with ..'s) to the data.
# @RELATIVEDATADIR@ exists soley for this line.

ICUDATADIR=$(pkgdatadir)/$(VERSION)
SRCDATADIR=$(top_srcdir)/../data
OBJDATADIR=$(top_builddir)/@RELATIVEDATADIR@

## Install program information
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs

INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_SCRIPT = @INSTALL_SCRIPT@

## for cleaning up libraries
STRIP = @STRIP@

## Package information
PACKAGE = @PACKAGE@
VERSION = @VERSION@


SUBDIRS = ctestfw toolutil makeconv genrb rbdump \
genccode genprops gennames gencmn gencnval gentz gentest

## List of phony targets
.PHONY : all all-local all-recursive install install-local install-everything install-files install-dlls build-data build-cmnfile build-dll		\
install-recursive clean clean-local clean-recursive distclean		\
distclean-local distclean-recursive dist dist-local dist-recursive	\
check check-local check-recursive build-testdlls build-basetestdata

## Clear suffix list
.SUFFIXES :

## List of standard targets
all: all-recursive all-local
install: install-recursive install-local
clean: clean-recursive clean-local
distclean : distclean-recursive distclean-local
dist: dist-recursive dist-local
check: check-recursive check-local

## Recursive targets
all-recursive install-recursive clean-recursive distclean-recursive dist-recursive check-recursive:
	@dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-local"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $$local_target) || exit; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) "$$target-local" || exit 1; \
	fi

all-local: build-local

DAT_FILES=uprops.dat unames.dat cnvalias.dat tz.dat
BRK_FILES=char.brk line.brk line_th.brk sent.brk word.brk word_th.brk

DATAFILESD=$(DAT_FILES:%=$(OBJDATADIR)/%)
DATAFILESB=$(BRK_FILES:%=$(OBJDATADIR)/%)

# copy the right endianness

ifeq (@U_IS_BIG_ENDIAN@,1)
$(OBJDATADIR)/%.brk: $(SRCDATADIR)/%BE.brk
	cp $< $@
else
$(OBJDATADIR)/%.brk: $(SRCDATADIR)/%LE.brk
	cp $< $@
endif

include $(srcdir)/makeconv/ucmfiles.mk
-include $(srcdir)/makeconv/ucmlocal.mk
ALL_UCM_SOURCE= $(UCM_SOURCE) $(UCM_SOURCE_LOCAL)

include $(srcdir)/genrb/genrbfiles.mk
-include $(srcdir)/genrb/reslocal.mk
ALL_RES_SOURCE= $(GENRB_SOURCE) $(TRANSLIT_SOURCE) $(RESOURCE_SRC) $(RES_SOURCE_LOCAL)

UCM_FILES = $(ALL_UCM_SOURCE:%=$(top_srcdir)/../data/%)
CNV_FILES = $(ALL_UCM_SOURCE:%.ucm=$(OBJDATADIR)/%.cnv)

RES_SRC_FILES = $(ALL_RES_SOURCE:%=$(top_srcdir)/../data/%)
RES_FILES = $(ALL_RES_SOURCE:%.txt=$(OBJDATADIR)/%.res)

DATAFILESC=$(CNV_FILES)
DATAFILESR=$(RES_FILES)

DATAFILES=$(DATAFILESD) $(DATAFILESC) $(DATAFILESB) $(DATAFILESR)

SRCDATAFILESD=$(DATAFILESD:%.dat=%_dat.c)
SRCDATAFILESR=$(DATAFILESR:%.res=%_res.c)
SRCDATAFILESC=$(DATAFILESC:%.cnv=%_cnv.c)
SRCDATAFILESB=$(DATAFILESB:%.brk=%_brk.c)

SRCDATAFILES=$(SRCDATAFILESD) $(SRCDATAFILESC) $(SRCDATAFILESB) $(SRCDATAFILESR) $(OBJDATADIR)/icudata_dat.c


OBJDATAFILES=$(SRCDATAFILES:%.c=%.o)
COMMONFILE=$(OBJDATADIR)/icudata.dat
COMMONDLL=$(OBJDATADIR)/libicudata.$(SO)

#the files for creating the test data
TESTDATAFILE=test.dat
TESTDATAD=$(TESTDATAFILE:%=$(OBJDATADIR)/%)
TESTDATAFILEC=$(TESTDATAD:.dat=_dat.c)
OBJTESTFILE=$(TESTDATAFILEC:%.c=%.o)
TESTDATADLL=$(OBJDATADIR)/libtest_dat.$(SO)
BASEDATADLL=$(OBJDATADIR)/libbase_dat.$(SO)
BASETESTDATADLL=$(OBJDATADIR)/libbase_test_dat.$(SO)

blah:
	echo $(SRCDATAFILES)

BASETESTDATA=base_test.dat
build-basetestdata: 
	@echo Generating the base test data file base_test.dat from test.dat
	@cp $(TESTDATAD) $(SRCDATADIR)/$(BASETESTDATA)
	@ls -l $(SRCDATADIR)/$(BASETESTDATA)

# the files to be installed -- the COMMON ones + any stragglers
UDATA_FILES=icudata.dat
UDATA_DLLS=libicudata.$(SO)

### use the "--enable-mapped=" option to configure, to get mapped file behavior.
# the case where '--enable-mapped=yes'
@USE_MAPPED_TRUE@build-local: build-data build-cmnfile build-basetestdata

# the case where '--enable-mapped=no'  (DEFAULT)
@USE_MAPPED_FALSE@build-local: build-data build-dll build-testdlls 
###

# check for any other generated data here
install-data: $(DATAFILES)

build-cmnfile:  $(COMMONFILE) 

# the -Wpath [etc] has relative DLL paths in it
# so we have to cd into the other dir..

gencmn/mkmap.tmp: Makefile $(DATAFILES)
	@echo -n Generating $@ list of data files
	@-$(RMV) gencmn/mkmap.tmp
	@for file in $(DATAFILES); do \
	  echo `pwd`/$$file >> gencmn/mkmap.tmp; \
	done;


$(COMMONFILE):	$(DATAFILES) gencmn/mkmap.tmp
	@echo -n Generating common file $(COMMONFILE).  Number of files: Objdata dir is $(OBJDATADIR)
	-@wc -l gencmn/mkmap.tmp
	-$(RMV) $(COMMONFILE)
	(cd gencmn ; ./gencmn -c -d ../$(OBJDATADIR) 1000000 mkmap.tmp )
	-@ls -l $(COMMONFILE)

build-dll: $(DATAFILES) gencmn/mkmap.tmp $(COMMONDLL)

build-testdlls: $(TESTDATADLL) $(BASEDATADLL) $(BASETESTDATADLL)

%_dat.c: %.dat
	(cd genccode ; ./genccode ../$< )

%_cnv.c: %.cnv
	(cd genccode ; ./genccode ../$< )

%_brk.c: %.brk
	(cd genccode ; ./genccode ../$< )

%_res.c: %.res
	(cd genccode ; ./genccode ../$< )
        
## Note: this generates a dummy C++ file to cause the HPUX CC linker
## to load exception handling (when requested..) 

hpux_junk_obj.cpp:
	echo "void to_emit_cxx_stuff_in_the_linker(){}" >> hpux_junk_obj.cpp

hpux_junk_obj.o: hpux_junk_obj.cpp
	$(COMPILE.cc) -o $@ $<

# strip is optional 
#	-$(STRIP) $@


# HPUX_JUNK_OBJ is usually unset except by mh-hpux-cc

$(OBJDATADIR)/icudata_dat.c: $(DATAFILES) gencmn/mkmap.tmp
	@(cd gencmn ; gencmn -S -d ../$(OBJDATADIR) 1000000 mkmap.tmp )

$(COMMONDLL): $(OBJDATAFILES) $(HPUX_JUNK_OBJ)
	$(SHLIB.c) -o $@ $^
	-ls -l $@

$(TESTDATADLL) $(BASEDATADLL) $(BASETESTDATADLL): $(OBJTESTFILE) $(HPUX_JUNK_OBJ)
	$(SHLIB.c) -o $@ $^
	-ls -l $@

srcs: $(SRCDATAFILES)


## Files to remove for 'make clean'
CLEANFILES = *~ $(BRK_FILES) $(OBJDATAFILES) $(HPUX_JUNK_OBJ) $(OBJTESTFILE) \
    $(COMMONDLL) $(TESTDATADLL) $(BASEDATADLL) $(BASETESTDATADLL)


### use the "--enable-mapped=" option to configure, to get mapped file behavior.
# the case where '--enable-mapped=yes' - raw files [which can be mapped]
@USE_MAPPED_TRUE@install-udata:  install-files

# the case where '--enable-mapped=no'  (DEFAULT) - DLL's [so's to you]
@USE_MAPPED_FALSE@install-udata: install-dlls
###

install-local: build-local install-udata

install-everything: install-files install-dlls

install-files:
	@for file in $(UDATA_FILES); do \
	  echo $(INSTALL_DATA) @DATABUILDDIR@/$$file $(DESTDIR)$(pkgdatadir)/$(VERSION)/$$file; \
	  $(INSTALL_DATA) @DATABUILDDIR@/$$file $(DESTDIR)$(pkgdatadir)/$(VERSION)/$$file || exit; \
	done

install-dlls:
	@for file in $(UDATA_DLLS); do \
	  echo $(INSTALL_DATA) @DATABUILDDIR@/$$file $(DESTDIR)$(pkgdatadir)/$(VERSION)/$$file; \
	  $(INSTALL-S) @DATABUILDDIR@/$$file $(DESTDIR)$(pkgdatadir)/$(VERSION)/$$file || exit; \
	done


dist-local:

clean-local:
	test -z "$(CLEANFILES)" || $(RMV) $(CLEANFILES)

distclean-local: clean-local
	$(RMV) Makefile $(SRCDATAFILES) $(DATAFILES) $(TESTDATAD) $(BASETESTDATA)

check-local:

Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
	cd $(top_builddir) \
	&& CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status