blob: d997e2665e90936f7841f20c4694b61f60900d80 [file] [log] [blame]
/*
**********************************************************************
* Copyright (c) 2003-2010, International Business Machines
* Corporation and others. All Rights Reserved.
**********************************************************************
* Author: Alan Liu
* Created: July 21 2003
* Since: ICU 2.8
**********************************************************************
*/
#ifndef OLSONTZ_H
#define OLSONTZ_H
#include "unicode/utypes.h"
#if !UCONFIG_NO_FORMATTING
#include "unicode/basictz.h"
struct UResourceBundle;
U_NAMESPACE_BEGIN
class SimpleTimeZone;
/**
* A time zone based on the Olson tz database. Olson time zones change
* behavior over time. The raw offset, rules, presence or absence of
* daylight savings time, and even the daylight savings amount can all
* vary.
*
* This class uses a resource bundle named "zoneinfo". Zoneinfo is a
* table containing different kinds of resources. In several places,
* zones are referred to using integers. A zone's integer is a number
* from 0..n-1, where n is the number of zones, with the zones sorted
* in lexicographic order.
*
* 1. Zones. These have keys corresponding to the Olson IDs, e.g.,
* "Asia/Shanghai". Each resource describes the behavior of the given
* zone. Zones come in two different formats.
*
* a. Zone (table). A zone is a table resource contains several
* type of resources below:
*
* - typeOffsets:intvector (Required)
*
* Sets of UTC raw/dst offset pairs in seconds. Entries at
* 2n represents raw offset and 2n+1 represents dst offset
* paired with the raw offset at 2n. The very first pair represents
* the initial zone offset (before the first transition) always.
*
* - trans:intvector (Optional)
*
* List of transition times represented by 32bit seconds from the
* epoch (1970-01-01T00:00Z) in ascending order.
*
* - transPre32/transPost32:intvector (Optional)
*
* List of transition times before/after 32bit minimum seconds.
* Each time is represented by a pair of 32bit integer.
*
* - typeMap:bin (Optional)
*
* Array of bytes representing the mapping between each transition
* time (transPre32/trans/transPost32) and its corresponding offset
* data (typeOffsets).
*
* - finalRule:string (Optional)
*
* If a recurrent transition rule is applicable to a zone forever
* after the final transition time, finalRule represents the rule
* in Rules data.
*
* - finalRaw:int (Optional)
*
* When finalRule is available, finalRaw is required and specifies
* the raw (base) offset of the rule.
*
* - finalYear:int (Optional)
*
* When finalRule is available, finalYear is required and specifies
* the start year of the rule.
*
* - links:intvector (Optional)
*
* When this zone data is shared with other zones, links specifies
* all zones including the zone itself. Each zone is referenced by
* integer index.
*
* b. Link (int, length 1). A link zone is an int resource. The
* integer is the zone number of the target zone. The key of this
* resource is an alternate name for the target zone. This data
* is corresponding to Link data in the tz database.
*
*
* 2. Rules. These have keys corresponding to the Olson rule IDs,
* with an underscore prepended, e.g., "_EU". Each resource describes
* the behavior of the given rule using an intvector, containing the
* onset list, the cessation list, and the DST savings. The onset and
* cessation lists consist of the month, dowim, dow, time, and time
* mode. The end result is that the 11 integers describing the rule
* can be passed directly into the SimpleTimeZone 13-argument
* constructor (the other two arguments will be the raw offset, taken
* from the complex zone element 5, and the ID string, which is not
* used), with the times and the DST savings multiplied by 1000 to
* scale from seconds to milliseconds.
*
* 3. Regions. An array specifies mapping between zones and regions.
* Each item is either a 2-letter ISO country code or "001"
* (UN M.49 - World). This data is generated from "zone.tab"
* in the tz database.
*/
class U_I18N_API OlsonTimeZone: public BasicTimeZone {
public:
/**
* Construct from a resource bundle.
* @param top the top-level zoneinfo resource bundle. This is used
* to lookup the rule that `res' may refer to, if there is one.
* @param res the resource bundle of the zone to be constructed
* @param ec input-output error code
*/
OlsonTimeZone(const UResourceBundle* top,
const UResourceBundle* res, UErrorCode& ec);
/**
* Copy constructor
*/
OlsonTimeZone(const OlsonTimeZone& other);
/**
* Destructor
*/
virtual ~OlsonTimeZone();
/**
* Assignment operator
*/
OlsonTimeZone& operator=(const OlsonTimeZone& other);
/**
* Returns true if the two TimeZone objects are equal.
*/
virtual UBool operator==(const TimeZone& other) const;
/**
* TimeZone API.
*/
virtual TimeZone* clone() const;
/**
* TimeZone API.
*/
static UClassID U_EXPORT2 getStaticClassID();
/**
* TimeZone API.
*/
virtual UClassID getDynamicClassID() const;
/**
* TimeZone API. Do not call this; prefer getOffset(UDate,...).
*/
virtual int32_t getOffset(uint8_t era, int32_t year, int32_t month,
int32_t day, uint8_t dayOfWeek,
int32_t millis, UErrorCode& ec) const;
/**
* TimeZone API. Do not call this; prefer getOffset(UDate,...).
*/
virtual int32_t getOffset(uint8_t era, int32_t year, int32_t month,
int32_t day, uint8_t dayOfWeek,
int32_t millis, int32_t monthLength,
UErrorCode& ec) const;
/**
* TimeZone API.
*/
virtual void getOffset(UDate date, UBool local, int32_t& rawOffset,
int32_t& dstOffset, UErrorCode& ec) const;
/**
* BasicTimeZone API.
*/
virtual void getOffsetFromLocal(UDate date, int32_t nonExistingTimeOpt, int32_t duplicatedTimeOpt,
int32_t& rawoff, int32_t& dstoff, UErrorCode& ec) /*const*/;
/**
* TimeZone API. This method has no effect since objects of this
* class are quasi-immutable (the base class allows the ID to be
* changed).
*/
virtual void setRawOffset(int32_t offsetMillis);
/**
* TimeZone API. For a historical zone, the raw offset can change
* over time, so this API is not useful. In order to approximate
* expected behavior, this method returns the raw offset for the
* current moment in time.
*/
virtual int32_t getRawOffset() const;
/**
* TimeZone API. For a historical zone, whether DST is used or
* not varies over time. In order to approximate expected
* behavior, this method returns TRUE if DST is observed at any
* point in the current year.
*/
virtual UBool useDaylightTime() const;
/**
* TimeZone API.
*/
virtual UBool inDaylightTime(UDate date, UErrorCode& ec) const;
/**
* TimeZone API.
*/
virtual int32_t getDSTSavings() const;
/**
* TimeZone API. Also comare historic transitions.
*/
virtual UBool hasSameRules(const TimeZone& other) const;
/**
* BasicTimeZone API.
* Gets the first time zone transition after the base time.
* @param base The base time.
* @param inclusive Whether the base time is inclusive or not.
* @param result Receives the first transition after the base time.
* @return TRUE if the transition is found.
*/
virtual UBool getNextTransition(UDate base, UBool inclusive, TimeZoneTransition& result) /*const*/;
/**
* BasicTimeZone API.
* Gets the most recent time zone transition before the base time.
* @param base The base time.
* @param inclusive Whether the base time is inclusive or not.
* @param result Receives the most recent transition before the base time.
* @return TRUE if the transition is found.
*/
virtual UBool getPreviousTransition(UDate base, UBool inclusive, TimeZoneTransition& result) /*const*/;
/**
* BasicTimeZone API.
* Returns the number of <code>TimeZoneRule</code>s which represents time transitions,
* for this time zone, that is, all <code>TimeZoneRule</code>s for this time zone except
* <code>InitialTimeZoneRule</code>. The return value range is 0 or any positive value.
* @param status Receives error status code.
* @return The number of <code>TimeZoneRule</code>s representing time transitions.
*/
virtual int32_t countTransitionRules(UErrorCode& status) /*const*/;
/**
* Gets the <code>InitialTimeZoneRule</code> and the set of <code>TimeZoneRule</code>
* which represent time transitions for this time zone. On successful return,
* the argument initial points to non-NULL <code>InitialTimeZoneRule</code> and
* the array trsrules is filled with 0 or multiple <code>TimeZoneRule</code>
* instances up to the size specified by trscount. The results are referencing the
* rule instance held by this time zone instance. Therefore, after this time zone
* is destructed, they are no longer available.
* @param initial Receives the initial timezone rule
* @param trsrules Receives the timezone transition rules
* @param trscount On input, specify the size of the array 'transitions' receiving
* the timezone transition rules. On output, actual number of
* rules filled in the array will be set.
* @param status Receives error status code.
* @draft ICU 3.8
*/
virtual void getTimeZoneRules(const InitialTimeZoneRule*& initial,
const TimeZoneRule* trsrules[], int32_t& trscount, UErrorCode& status) /*const*/;
private:
/**
* Default constructor. Creates a time zone with an empty ID and
* a fixed GMT offset of zero.
*/
OlsonTimeZone();
private:
void constructEmpty();
void getHistoricalOffset(UDate date, UBool local,
int32_t NonExistingTimeOpt, int32_t DuplicatedTimeOpt,
int32_t& rawoff, int32_t& dstoff) const;
int16_t transitionCount() const;
int64_t transitionTimeInSeconds(int16_t transIdx) const;
double transitionTime(int16_t transIdx) const;
/*
* Following 3 methods return an offset at the given transition time index.
* When the index is negative, return the initial offset.
*/
int32_t zoneOffsetAt(int16_t transIdx) const;
int32_t rawOffsetAt(int16_t transIdx) const;
int32_t dstOffsetAt(int16_t transIdx) const;
/*
* Following methods return the initial offset.
*/
int32_t initialRawOffset() const;
int32_t initialDstOffset() const;
/**
* Number of transitions in each time range
*/
int16_t transitionCountPre32;
int16_t transitionCount32;
int16_t transitionCountPost32;
/**
* Time of each transition in seconds from 1970 epoch before 32bit second range (<= 1900).
* Each transition in this range is represented by a pair of int32_t.
* Length is transitionCount int32_t's. NULL if no transitions in this range.
*/
const int32_t *transitionTimesPre32; // alias into res; do not delete
/**
* Time of each transition in seconds from 1970 epoch in 32bit second range.
* Length is transitionCount int32_t's. NULL if no transitions in this range.
*/
const int32_t *transitionTimes32; // alias into res; do not delete
/**
* Time of each transition in seconds from 1970 epoch after 32bit second range (>= 2038).
* Each transition in this range is represented by a pair of int32_t.
* Length is transitionCount int32_t's. NULL if no transitions in this range.
*/
const int32_t *transitionTimesPost32; // alias into res; do not delete
/**
* Number of types, 1..255
*/
int16_t typeCount;
/**
* Offset from GMT in seconds for each type.
* Length is typeCount int32_t's. At least one type (a pair of int32_t)
* is required.
*/
const int32_t *typeOffsets; // alias into res; do not delete
/**
* Type description data, consisting of transitionCount uint8_t
* type indices (from 0..typeCount-1).
* Length is transitionCount int16_t's. NULL if no transitions.
*/
const uint8_t *typeMapData; // alias into res; do not delete
/**
* A SimpleTimeZone that governs the behavior for date >= finalMillis.
*/
SimpleTimeZone *finalZone; // owned, may be NULL
/**
* For date >= finalMillis, the finalZone will be used.
*/
double finalStartMillis;
/**
* For year >= finalYear, the finalZone will be used.
*/
int32_t finalStartYear;
/* BasicTimeZone support */
void clearTransitionRules(void);
void deleteTransitionRules(void);
void initTransitionRules(UErrorCode& status);
InitialTimeZoneRule *initialRule;
TimeZoneTransition *firstTZTransition;
int16_t firstTZTransitionIdx;
TimeZoneTransition *firstFinalTZTransition;
TimeArrayTimeZoneRule **historicRules;
int16_t historicRuleCount;
SimpleTimeZone *finalZoneWithStartYear; // hack
UBool transitionRulesInitialized;
};
inline int16_t
OlsonTimeZone::transitionCount() const {
return transitionCountPre32 + transitionCount32 + transitionCountPost32;
}
inline double
OlsonTimeZone::transitionTime(int16_t transIdx) const {
return (double)transitionTimeInSeconds(transIdx) * U_MILLIS_PER_SECOND;
}
inline int32_t
OlsonTimeZone::zoneOffsetAt(int16_t transIdx) const {
int16_t typeIdx = (transIdx >= 0 ? typeMapData[transIdx] : 0) << 1;
return typeOffsets[typeIdx] + typeOffsets[typeIdx + 1];
}
inline int32_t
OlsonTimeZone::rawOffsetAt(int16_t transIdx) const {
int16_t typeIdx = (transIdx >= 0 ? typeMapData[transIdx] : 0) << 1;
return typeOffsets[typeIdx];
}
inline int32_t
OlsonTimeZone::dstOffsetAt(int16_t transIdx) const {
int16_t typeIdx = (transIdx >= 0 ? typeMapData[transIdx] : 0) << 1;
return typeOffsets[typeIdx + 1];
}
inline int32_t
OlsonTimeZone::initialRawOffset() const {
return typeOffsets[0];
}
inline int32_t
OlsonTimeZone::initialDstOffset() const {
return typeOffsets[1];
}
U_NAMESPACE_END
#endif // !UCONFIG_NO_FORMATTING
#endif // OLSONTZ_H
//eof