/*
********************************************************************************
*                                                                              *
* COPYRIGHT:                                                                   *
*   (C) Copyright Taligent, Inc.,  1997                                        *
*   (C) Copyright International Business Machines Corporation,  1997-1999      *
*   Licensed Material - Program-Property of IBM - All Rights Reserved.         *
*   US Government Users Restricted Rights - Use, duplication, or disclosure    *
*   restricted by GSA ADP Schedule Contract with IBM Corp.                     *
*                                                                              *
********************************************************************************
*
* File DECIMFMT.H
*
* Modification History:
*
*   Date        Name        Description
*   02/19/97    aliu        Converted from java.
*   03/20/97    clhuang     Updated per C++ implementation.
*   04/03/97    aliu        Rewrote parsing and formatting completely, and
*                           cleaned up and debugged.  Actually works now.
*   04/17/97    aliu        Changed DigitCount to int per code review.
*   07/10/97    helena      Made ParsePosition a class and get rid of the function
*                           hiding problems.
*   09/09/97    aliu        Ported over support for exponential formats.
*    07/20/98    stephen        Changed documentation
********************************************************************************
*/
 
#ifndef DECIMFMT_H
#define DECIMFMT_H
 
#include "utypes.h"
#include "numfmt.h"
#include "locid.h"

class DecimalFormatSymbols;
class DigitList;

/**
 * Concrete class for formatting decimal numbers, allowing a variety
 * of parameters, and localization to Western, Arabic, or Indic numbers.
 * <P>
 * Normally, you get the proper NumberFormat for a specific locale
 * (including the default locale) using the NumberFormat factory methods,
 * rather than constructing a DecimalNumberFormat directly.
 * <P>
 * Either the prefixes or the suffixes must be different for the parse
 * to distinguish positive from negative.  Parsing will be unreliable
 * if the digits, thousands or decimal separators are the same, or if
 * any of them occur in the prefixes or suffixes.
 * <P>
 * [Special cases:] 
 * <P>
 * NaN is formatted as a single character, typically \\uFFFD.
 * <P>
 * +/-Infinity is formatted as a single character, typically \\u221E,
 * plus the positive and negative pre/suffixes.
 * <P>
 * Note: this class is designed for common users; for very large or small
 * numbers, use a format that can express exponential values.
 * <P>
 * [Example:] 
 * <pre>
 * .    // normally we would have a GUI with a menu for this
 * .    int32_t locCount;
 * .    const Locale* locales = NumberFormat::getAvailableLocales(locCount);
 * .    if (locCount > 12) locCount = 12;  //limit output
 * .
 * .    double myNumber = -1234.56;
 * .    UErrorCode success = ZERO_ERROR;
 * .    NumberFormat* form; //= NumberFormat::createInstance(success);
 * .
 * .    // just for fun, we print out a number with the locale number, currency
 * .    // and percent format for each locale we can.
 * .    UnicodeString countryName;
 * .    UnicodeString displayName;
 * .    UnicodeString str;
 * .    UnicodeString pattern;
 * .    Formattable fmtable;
 * .    for (int32_t j = 0; j < 3; ++j) {
 * .        cout << endl << "FORMAT " << j << endl;
 * .        for (int32_t i = 0; i < locCount; ++i) {
 * .            if (locales[i].getCountry(countryName).size() == 0) {
 * .                // skip language-only
 * .                continue;
 * .            }
 * .            switch (j) {
 * .            default:
 * .                form = NumberFormat::createInstance(locales[i], success ); break;
 * .            case 1:
 * .                form = NumberFormat::createCurrencyInstance(locales[i], success ); break;
 * .            case 0:
 * .                form = NumberFormat::createPercentInstance(locales[i], success ); break;
 * .            }
 * .            if (form) {
 * .                str.remove();
 * .                pattern = ((DecimalFormat*)form)->toPattern(pattern);
 * .                cout << locales[i].getDisplayName(displayName) << ": " << pattern;
 * .                cout << "  ->  " << form->format(myNumber,str) << endl;
 * .                form->parse(form->format(myNumber,str), fmtable, success);
 * .                //cout << "   parsed: " << fmtable << endl;
 * .                delete form;  
 * .            }
 * .        }
 * .    }
 * </pre>
 * [The following shows the structure of the pattern.] 
 * <pre>
 * .    pattern    := subpattern{;subpattern}
 * .    subpattern := {prefix}integer{.fraction}{suffix}
 * .    
 * .    prefix     := '\\u0000'..'\\uFFFD' - specialCharacters
 * .    suffix     := '\\u0000'..'\\uFFFD' - specialCharacters
 * .    integer    := '#'* '0'* '0'
 * .    fraction   := '0'* '#'*
 *    
 *  Notation:
 * .    X*       0 or more instances of X
 * .    (X | Y)  either X or Y.
 * .    X..Y     any character from X up to Y, inclusive.
 * .    S - T    characters in S, except those in T
 * </pre>
 * The first subpattern is for positive numbers. The second (optional)
 * subpattern is used for negative numbers. (In both cases, ',' can
 * occur inside the integer portion--it is just too messy to indicate
 * in BNF.)  For the second subpattern, only the PREFIX and SUFFIX are
 * noted; other attributes are taken only from the first subpattern.
 * <P>
 * Here are the special characters used in the parts of the
 * subpattern, with notes on their usage.
 * <pre>
 * .    Symbol   Meaning
 * .      0      a digit, showing up a zero if it is zero
 * .      #      a digit, supressed if zero
 * .      .      placeholder for decimal separator
 * .      ,      placeholder for grouping separator.
 * .      E      separates mantissa and exponent for exponential formats.
 * .      ;      separates formats.
 * .      -      default negative prefix.
 * .      %      multiply by 100 and show as percentage
 * .      \u2030 multiply by 1000 and show as per mille
 * .      \u00A4 currency sign; replaced by currency symbol; if
 * .             doubled, replaced by international currency symbol.
 * .             If present in a pattern, the monetary decimal separator
 * .             is used instead of the decimal separator.
 * .      X      any other characters can be used in the prefix or suffix
 * .      '      used to quote special characters in a prefix or suffix.
 * </pre>
 * [Notes] 
 * <P>
 * If there is no explicit negative subpattern, - is prefixed to the
 * positive form. That is, "0.00" alone is equivalent to "0.00;-0.00".
 * <P>
 * Illegal formats, such as "#.#.#" in the same format, will cause a
 * failing UErrorCode to be returned. 
 * <P>
 * The grouping separator is commonly used for thousands, but in some
 * countries for ten-thousands. The interval is a constant number of
 * digits between the grouping characters, such as 100,000,000 or 1,0000,0000.
 * If you supply a pattern with multiple grouping characters, the interval
 * between the last one and the end of the integer is the one that is
 * used. So "#,##,###,####" == "######,####" == "##,####,####".
 * <P>
 * This class only handles localized digits where the 10 digits are
 * contiguous in Unicode, from 0 to 9. Other digits sets (such as
 * superscripts) would need a different subclass.
 */
class U_I18N_API DecimalFormat: public NumberFormat {
public:
    enum ERoundingMode {
        kRoundCeiling,
        kRoundFloor,
        kRoundDown,
        kRoundUp,
        kRoundHalfEven,
        kRoundHalfDown,
        kRoundHalfUp
        // We don't support ROUND_UNNECESSARY
    };

    enum EPadPosition {
        kPadBeforePrefix,
        kPadAfterPrefix,
        kPadBeforeSuffix,
        kPadAfterSuffix
    };

    /**
     * Create a DecimalFormat using the default pattern and symbols
     * for the default locale. This is a convenient way to obtain a
     * DecimalFormat when internationalization is not the main concern.
     * <P>
     * To obtain standard formats for a given locale, use the factory methods
     * on NumberFormat such as getNumberInstance. These factories will
     * return the most appropriate sub-class of NumberFormat for a given
     * locale.
     * @param status    Output param set to success/failure code. If the
     *                  pattern is invalid this will be set to a failure code.
     */
    DecimalFormat(UErrorCode& status);

    /**
     * Create a DecimalFormat from the given pattern and the symbols
     * for the default locale. This is a convenient way to obtain a
     * DecimalFormat when internationalization is not the main concern.
     * <P>
     * To obtain standard formats for a given locale, use the factory methods
     * on NumberFormat such as getNumberInstance. These factories will
     * return the most appropriate sub-class of NumberFormat for a given
     * locale.
     * @param pattern   A non-localized pattern string.
     * @param status    Output param set to success/failure code. If the
     *                  pattern is invalid this will be set to a failure code.
     */
    DecimalFormat(const UnicodeString& pattern,
                  UErrorCode& status);

    /**
     * Create a DecimalFormat from the given pattern and symbols.
     * Use this constructor when you need to completely customize the
     * behavior of the format.
     * <P>
     * To obtain standard formats for a given
     * locale, use the factory methods on NumberFormat such as
     * getInstance or getCurrencyInstance. If you need only minor adjustments
     * to a standard format, you can modify the format returned by
     * a NumberFormat factory method.
     *
     * @param pattern           a non-localized pattern string
     * @param symbolsToAdopt    the set of symbols to be used.  The caller should not
     *                          delete this object after making this call.
     * @param status            Output param set to success/failure code. If the
     *                          pattern is invalid this will be set to a failure code.
     */
    DecimalFormat(  const UnicodeString& pattern,
                    DecimalFormatSymbols* symbolsToAdopt,
                    UErrorCode& status);

    /**
     * Create a DecimalFormat from the given pattern and symbols.
     * Use this constructor when you need to completely customize the
     * behavior of the format.
     * <P>
     * To obtain standard formats for a given
     * locale, use the factory methods on NumberFormat such as
     * getInstance or getCurrencyInstance. If you need only minor adjustments
     * to a standard format, you can modify the format returned by
     * a NumberFormat factory method.
     *
     * @param pattern           a non-localized pattern string
     * @param symbols   the set of symbols to be used
     * @param status            Output param set to success/failure code. If the
     *                          pattern is invalid this will be set to a failure code.
     */
    DecimalFormat(  const UnicodeString& pattern,
                    const DecimalFormatSymbols& symbols,
                    UErrorCode& status);

    /**
     * Copy constructor.
     */
    DecimalFormat(const DecimalFormat& source);

    /**
     * Assignment operator.
     */
    DecimalFormat& operator=(const DecimalFormat& rhs);

    /**
     * Destructor.
     */
    virtual ~DecimalFormat();

    /**
     * Clone this Format object polymorphically. The caller owns the
     * result and should delete it when done.
     */
    virtual Format* clone(void) const;

    /**
     * Return true if the given Format objects are semantically equal.
     * Objects of different subclasses are considered unequal.
     */
    virtual bool_t operator==(const Format& other) const;

   /**
    * Format a double or long number using base-10 representation.
    *
    * @param number     The value to be formatted.
    * @param toAppendTo The string to append the formatted string to.
    *                   This is an output parameter.
    * @param pos        On input: an alignment field, if desired.
    *                   On output: the offsets of the alignment field.
    * @return           A reference to 'toAppendTo'.
    */
    virtual UnicodeString& format(double number,
                                  UnicodeString& toAppendTo,
                                  FieldPosition& pos) const;
    virtual UnicodeString& format(int32_t number,
                                  UnicodeString& toAppendTo,
                                  FieldPosition& pos) const;
    virtual UnicodeString& format(const Formattable& obj,
                                  UnicodeString& toAppendTo,
                                  FieldPosition& pos,
                                  UErrorCode& status) const;

   /**
    * Parse the given string using this object's choices. The method
    * does string comparisons to try to find an optimal match.
    * If no object can be parsed, index is unchanged, and NULL is
    * returned.
    *
    * @param text           The text to be parsed.
    * @param result         Formattable to be set to the parse result.
    *                       If parse fails, return contents are undefined.
    * @param parsePosition  The position to start parsing at on input.
    *                       On output, moved to after the last successfully
    *                       parse character. On parse failure, does not change.
    */
    virtual void parse(const UnicodeString& text,
                       Formattable& result,
                       ParsePosition& parsePosition) const;

    // Declare here again to get rid of function hiding problems.
    virtual void parse(const UnicodeString& text, 
                       Formattable& result, 
                       UErrorCode& error) const;

    /**
     * Returns the decimal format symbols, which is generally not changed
     * by the programmer or user.
     * @return desired DecimalFormatSymbols
     * @see DecimalFormatSymbols
     */
    virtual const DecimalFormatSymbols* getDecimalFormatSymbols(void) const;

    /**
     * Sets the decimal format symbols, which is generally not changed
     * by the programmer or user.
     * @param symbolsToAdopt DecimalFormatSymbols to be adopted.
     */
    virtual void adoptDecimalFormatSymbols(DecimalFormatSymbols* symbolsToAdopt);

    /**
     * Sets the decimal format symbols, which is generally not changed
     * by the programmer or user.
     * @param symbols DecimalFormatSymbols.
     */
    virtual void setDecimalFormatSymbols(const DecimalFormatSymbols& symbols);


    /**
     * Get the positive prefix.
     *
     * Examples: +123, $123, sFr123
     */
    UnicodeString& getPositivePrefix(UnicodeString& result) const;

    /**
     * Set the positive prefix.
     *
     * Examples: +123, $123, sFr123
     */
    virtual void setPositivePrefix(const UnicodeString& newValue);

    /**
     * Get the negative prefix.
     *
     * Examples: -123, ($123) (with negative suffix), sFr-123
     */
    UnicodeString& getNegativePrefix(UnicodeString& result) const;

    /**
     * Set the negative prefix.
     *
     * Examples: -123, ($123) (with negative suffix), sFr-123
     */
    virtual void setNegativePrefix(const UnicodeString& newValue);

    /**
     * Get the positive suffix.
     *
     * Example: 123%
     */
    UnicodeString& getPositiveSuffix(UnicodeString& result) const;

    /**
     * Set the positive suffix.
     *
     * Example: 123%
     */
    virtual void setPositiveSuffix(const UnicodeString& newValue);

    /**
     * Get the negative suffix.
     *
     * Examples: -123%, ($123) (with positive suffixes)
     */
    UnicodeString& getNegativeSuffix(UnicodeString& result) const;

    /**
     * Set the positive suffix.
     *
     * Examples: 123%
     */
    virtual void setNegativeSuffix(const UnicodeString& newValue);

    /**
     * Get the multiplier for use in percent, permill, etc.
     * For a percentage, set the suffixes to have "%" and the multiplier to be 100.
     * (For Arabic, use arabic percent symbol).
     * For a permill, set the suffixes to have "\u2031" and the multiplier to be 1000.
     *
     * Examples: with 100, 1.23 -> "123", and "123" -> 1.23
     */
    int32_t getMultiplier(void) const;

    /**
     * Set the multiplier for use in percent, permill, etc.
     * For a percentage, set the suffixes to have "%" and the multiplier to be 100.
     * (For Arabic, use arabic percent symbol).
     * For a permill, set the suffixes to have "\u2031" and the multiplier to be 1000.
     *
     * Examples: with 100, 1.23 -> "123", and "123" -> 1.23
     */
    virtual void setMultiplier(int32_t newValue);

    /**
     * Get the rounding increment.
     * @return A positive rounding increment, or 0.0 if rounding
     * is not in effect.
     * @see #setRoundingIncrement
     * @see #getRoundingMode
     * @see #setRoundingMode
     */
    virtual double getRoundingIncrement(void);

    /**
     * Set the rounding increment.  This method also controls whether
     * rounding is enabled.
     * @param newValue A positive rounding increment, or 0.0 to disable rounding.
     * Negative increments are equivalent to 0.0.
     * @see #getRoundingIncrement
     * @see #getRoundingMode
     * @see #setRoundingMode
     */
    virtual void setRoundingIncrement(double newValue);

    /**
     * Get the rounding mode.
     * @return A rounding mode
     * @see #setRoundingIncrement
     * @see #getRoundingIncrement
     * @see #setRoundingMode
     */
    virtual ERoundingMode getRoundingMode(void);

    /**
     * Set the rounding mode.  This has no effect unless the rounding
     * increment is greater than zero.
     * @param roundingMode A rounding mode
     * @see #setRoundingIncrement
     * @see #getRoundingIncrement
     * @see #getRoundingMode
     */
    virtual void setRoundingMode(ERoundingMode roundingMode);

    /**
     * Get the width to which the output of <code>format()</code> is padded.
     * @return the format width, or zero if no padding is in effect
     * @see #setFormatWidth
     * @see #getPadCharacter
     * @see #setPadCharacter
     * @see #getPadPosition
     * @see #setPadPosition
     */
    virtual int32_t getFormatWidth(void);

    /**
     * Set the width to which the output of <code>format()</code> is padded.
     * This method also controls whether padding is enabled.
     * @param width the width to which to pad the result of
     * <code>format()</code>, or zero to disable padding.  A negative
     * width is equivalent to 0.
     * @see #getFormatWidth
     * @see #getPadCharacter
     * @see #setPadCharacter
     * @see #getPadPosition
     * @see #setPadPosition
     */
    virtual void setFormatWidth(int32_t width);

    /**
     * Get the character used to pad to the format width.  The default is ' '.
     * @return the pad character
     * @see #setFormatWidth
     * @see #getFormatWidth
     * @see #setPadCharacter
     * @see #getPadPosition
     * @see #setPadPosition
     */
    virtual UChar getPadCharacter(void);

    /**
     * Set the character used to pad to the format width.  This has no effect
     * unless padding is enabled.
     * @param padChar the pad character
     * @see #setFormatWidth
     * @see #getFormatWidth
     * @see #getPadCharacter
     * @see #getPadPosition
     * @see #setPadPosition
     */
    virtual void setPadCharacter(UChar padChar);

    /**
     * Get the position at which padding will take place.  This is the location
     * at which padding will be inserted if the result of <code>format()</code>
     * is shorter than the format width.
     * @return the pad position, one of <code>kPadBeforePrefix</code>,
     * <code>kPadAfterPrefix</code>, <code>kPadBeforeSuffix</code>, or
     * <code>kPadAfterSuffix</code>.
     * @see #setFormatWidth
     * @see #getFormatWidth
     * @see #setPadCharacter
     * @see #getPadCharacter
     * @see #setPadPosition
     * @see #kPadBeforePrefix
     * @see #kPadAfterPrefix
     * @see #kPadBeforeSuffix
     * @see #kPadAfterSuffix
     */
    virtual EPadPosition getPadPosition(void);

    /**
     * <strong><font face=helvetica color=red>NEW</font></strong>
     * Set the position at which padding will take place.  This is the location
     * at which padding will be inserted if the result of <code>format()</code>
     * is shorter than the format width.  This has no effect unless padding is
     * enabled.
     * @param padPos the pad position, one of <code>kPadBeforePrefix</code>,
     * <code>kPadAfterPrefix</code>, <code>kPadBeforeSuffix</code>, or
     * <code>kPadAfterSuffix</code>.
     * @see #setFormatWidth
     * @see #getFormatWidth
     * @see #setPadCharacter
     * @see #getPadCharacter
     * @see #getPadPosition
     * @see #kPadBeforePrefix
     * @see #kPadAfterPrefix
     * @see #kPadBeforeSuffix
     * @see #kPadAfterSuffix
     */
    virtual void setPadPosition(EPadPosition padPos);

    /**
     * Return whether or not scientific notation is used.
     * @return TRUE if this object formats and parses scientific notation
     * @see #setScientificNotation
     * @see #getMinimumExponentDigits
     * @see #setMinimumExponentDigits
     * @see #isExponentSignAlwaysShown
     * @see #setExponentSignAlwaysShown
     */
    virtual bool_t isScientificNotation(void);

    /**
     * Set whether or not scientific notation is used.
     * @param useScientific TRUE if this object formats and parses scientific
     * notation
     * @see #isScientificNotation
     * @see #getMinimumExponentDigits
     * @see #setMinimumExponentDigits
     * @see #isExponentSignAlwaysShown
     * @see #setExponentSignAlwaysShown
     */
    virtual void setScientificNotation(bool_t useScientific);

    /**
     * Return the minimum exponent digits that will be shown.
     * @return the minimum exponent digits that will be shown
     * @see #setScientificNotation
     * @see #isScientificNotation
     * @see #setMinimumExponentDigits
     * @see #isExponentSignAlwaysShown
     * @see #setExponentSignAlwaysShown
     */
    virtual int8_t getMinimumExponentDigits(void);

    /**
     * Set the minimum exponent digits that will be shown.  This has no
     * effect unless scientific notation is in use.
     * @param minExpDig a value >= 1 indicating the fewest exponent digits
     * that will be shown.  Values less than 1 will be treated as 1.
     * @see #setScientificNotation
     * @see #isScientificNotation
     * @see #getMinimumExponentDigits
     * @see #isExponentSignAlwaysShown
     * @see #setExponentSignAlwaysShown
     */
    virtual void setMinimumExponentDigits(int8_t minExpDig);

    /**
     * Return whether the exponent sign is always shown.
     * @return TRUE if the exponent is always prefixed with either the
     * localized minus sign or the localized plus sign, false if only negative
     * exponents are prefixed with the localized minus sign.
     * @see #setScientificNotation
     * @see #isScientificNotation
     * @see #setMinimumExponentDigits
     * @see #getMinimumExponentDigits
     * @see #setExponentSignAlwaysShown
     */
    virtual bool_t isExponentSignAlwaysShown(void);

    /**
     * Set whether the exponent sign is always shown.  This has no effect
     * unless scientific notation is in use.
     * @param expSignAlways TRUE if the exponent is always prefixed with either
     * the localized minus sign or the localized plus sign, false if only
     * negative exponents are prefixed with the localized minus sign.
     * @see #setScientificNotation
     * @see #isScientificNotation
     * @see #setMinimumExponentDigits
     * @see #getMinimumExponentDigits
     * @see #isExponentSignAlwaysShown
     */
    virtual void setExponentSignAlwaysShown(bool_t expSignAlways);

    /**
     * Return the grouping size. Grouping size is the number of digits between
     * grouping separators in the integer portion of a number.  For example,
     * in the number "123,456.78", the grouping size is 3.
     * @see setGroupingSize
     * @see NumberFormat::isGroupingUsed
     * @see DecimalFormatSymbols::getGroupingSeparator
     */
    int32_t getGroupingSize(void) const;

    /**
     * Set the grouping size. Grouping size is the number of digits between
     * grouping separators in the integer portion of a number.  For example,
     * in the number "123,456.78", the grouping size is 3.
     * @see getGroupingSize
     * @see NumberFormat::setGroupingUsed
     * @see DecimalFormatSymbols::setGroupingSeparator
     */
    virtual void setGroupingSize(int32_t newValue);

    /**
     * Allows you to get the behavior of the decimal separator with integers.
     * (The decimal separator will always appear with decimals.)
     *
     * Example: Decimal ON: 12345 -> 12345.; OFF: 12345 -> 12345
     */
    bool_t isDecimalSeparatorAlwaysShown(void) const;

    /**
     * Allows you to set the behavior of the decimal separator with integers.
     * (The decimal separator will always appear with decimals.)
     *
     * Example: Decimal ON: 12345 -> 12345.; OFF: 12345 -> 12345
     */
    virtual void setDecimalSeparatorAlwaysShown(bool_t newValue);

    /**
     * Synthesizes a pattern string that represents the current state
     * of this Format object.
     * @see applyPattern
     */
    virtual UnicodeString& toPattern(UnicodeString& result) const;

    /**
     * Synthesizes a localized pattern string that represents the current
     * state of this Format object.
     *
     * @see applyPattern
     */
    virtual UnicodeString& toLocalizedPattern(UnicodeString& result) const;
 
    /**
     * Apply the given pattern to this Format object.  A pattern is a
     * short-hand specification for the various formatting properties.
     * These properties can also be changed individually through the
     * various setter methods.
     * <P>
     * There is no limit to integer digits are set
     * by this routine, since that is the typical end-user desire;
     * use setMaximumInteger if you want to set a real value.
     * For negative numbers, use a second pattern, separated by a semicolon
     * <pre>
     * .      Example "#,#00.0#" -> 1,234.56
     * </pre>
     * This means a minimum of 2 integer digits, 1 fraction digit, and
     * a maximum of 2 fraction digits.
     * <pre>
     * .      Example: "#,#00.0#;(#,#00.0#)" for negatives in parantheses.
     * </pre>
     * In negative patterns, the minimum and maximum counts are ignored;
     * these are presumed to be set in the positive pattern.
     *
     * @param pattern   The pattern to be applied.
     * @param status    Output param set to success/failure code on
     *                  exit. If the pattern is invalid, this will be
     *                  set to a failure result.
     */
    virtual void applyPattern(const UnicodeString& pattern,
                              UErrorCode& status);

    /**
     * Apply the given pattern to this Format object.  The pattern
     * is assumed to be in a localized notation. A pattern is a
     * short-hand specification for the various formatting properties.
     * These properties can also be changed individually through the
     * various setter methods.
     * <P>
     * There is no limit to integer digits are set
     * by this routine, since that is the typical end-user desire;
     * use setMaximumInteger if you want to set a real value.
     * For negative numbers, use a second pattern, separated by a semicolon
     * <pre>
     * .      Example "#,#00.0#" -> 1,234.56
     * </pre>
     * This means a minimum of 2 integer digits, 1 fraction digit, and
     * a maximum of 2 fraction digits.
     *
     * Example: "#,#00.0#;(#,#00.0#)" for negatives in parantheses.
     *
     * In negative patterns, the minimum and maximum counts are ignored;
     * these are presumed to be set in the positive pattern.
     *
     * @param pattern   The localized pattern to be applied.
     * @param status    Output param set to success/failure code on
     *                  exit. If the pattern is invalid, this will be
     *                  set to a failure result.
     */
    virtual void applyLocalizedPattern(const UnicodeString& pattern,
                                       UErrorCode& status);

    /**
     * Sets the maximum number of digits allowed in the integer portion of a
     * number. This override limits the integer digit count to 309.
     * @see NumberFormat#setMaximumIntegerDigits
     */
    virtual void setMaximumIntegerDigits(int32_t newValue);

    /**
     * Sets the minimum number of digits allowed in the integer portion of a
     * number. This override limits the integer digit count to 309.
     * @see NumberFormat#setMinimumIntegerDigits
     */
    virtual void setMinimumIntegerDigits(int32_t newValue);

    /**
     * Sets the maximum number of digits allowed in the fraction portion of a
     * number. This override limits the fraction digit count to 340.
     * @see NumberFormat#setMaximumFractionDigits
     */
    virtual void setMaximumFractionDigits(int32_t newValue);

    /**
     * Sets the minimum number of digits allowed in the fraction portion of a
     * number. This override limits the fraction digit count to 340.
     * @see NumberFormat#setMinimumFractionDigits
     */
    virtual void setMinimumFractionDigits(int32_t newValue);

    /**
     * The resource tags we use to retrieve decimal format data from
     * locale resource bundles.
     */
    static const UnicodeString fgNumberPatterns;

public:

    /**
     * Return the class ID for this class.  This is useful only for
     * comparing to a return value from getDynamicClassID().  For example:
     * <pre>
     * .      Base* polymorphic_pointer = createPolymorphicObject();
     * .      if (polymorphic_pointer->getDynamicClassID() ==
     * .          Derived::getStaticClassID()) ...
     * </pre>
     * @return          The class ID for all objects of this class.
     */
    static ClassID getStaticClassID(void) { return (ClassID)&fgClassID; }

    /**
     * Returns a unique class ID POLYMORPHICALLY.  Pure virtual override.
     * This method is to implement a simple version of RTTI, since not all
     * C++ compilers support genuine RTTI.  Polymorphic operator==() and
     * clone() methods call this method.
     *
     * @return          The class ID for this object. All objects of a
     *                  given class have the same class ID.  Objects of
     *                  other classes have different class IDs.
     */
    virtual ClassID getDynamicClassID(void) const { return getStaticClassID(); }

private:
    static char fgClassID;

    /**
     * Do real work of constructing a new DecimalFormat.
     */
    void construct(UErrorCode&               status,
                   const UnicodeString*     pattern = 0,
                   DecimalFormatSymbols*    symbolsToAdopt = 0,
                   const Locale&            locale = Locale::getDefault());

    /**
     * Does the real work of generating a pattern.
     */
    UnicodeString& toPattern(UnicodeString& result, bool_t localized) const;

    /**
     * Does the real work of applying a pattern.
     * @param pattern   The pattern to be applied.
     * @param localized If true, the pattern is localized; else false.
     * @param status    Output param set to success/failure code on
     *                  exit. If the pattern is invalid, this will be
     *                  set to a failure result.
     */
    void applyPattern(const UnicodeString& pattern,
                            bool_t localized,
                            UErrorCode& status);

    /**
     * Do the work of formatting a number, either a double or a long.
     */
    UnicodeString& subformat(UnicodeString& result,
                             FieldPosition& fieldPosition,
                             bool_t         isNegative,
                             bool_t         isInteger) const;

    static const int32_t fgStatusInfinite;
    static const int32_t fgStatusPositive;
    static const int32_t fgStatusLength;

    /**
     * Parse the given text into a number.  The text is parsed beginning at
     * parsePosition, until an unparseable character is seen.
     * @param text The string to parse.
     * @param parsePosition The position at which to being parsing.  Upon
     * return, the first unparseable character.
     * @param digits The DigitList to set to the parsed value.
     * @param isExponent If true, parse an exponent.  This means no
     * infinite values and integer only.
     * @param status Upon return contains boolean status flags indicating
     * whether the value was infinite and whether it was positive.
     */
    bool_t subparse(const UnicodeString& text, ParsePosition& parsePosition,
                    DigitList& digits, bool_t isExponent,
                    bool_t* status) const;

    /**
     * Append an affix to the given StringBuffer, using quotes if
     * there are special characters.  Single quotes themselves must be
     * escaped in either case.
     */
    void appendAffix(UnicodeString& buffer, const UnicodeString& affix, 
                     bool_t localized) const;

    void appendAffix(UnicodeString& buffer,
                     const UnicodeString* affixPattern,
                     const UnicodeString& expAffix, bool_t localized) const;

    void expandAffix(const UnicodeString& pattern,
                     UnicodeString& affix) const;

    void expandAffixes();
    
    static double round(double a, ERoundingMode mode, bool_t isNegative);

    void addPadding(UnicodeString& result, bool_t hasAffixes,
                    bool_t isNegative) const;

    /**
     * Constants.
     */
    static const int8_t fgMaxDigit; // The largest digit, in this case 9

    /*transient*/ DigitList* fDigitList;

    UnicodeString           fPositivePrefix;
    UnicodeString           fPositiveSuffix;
    UnicodeString           fNegativePrefix;
    UnicodeString           fNegativeSuffix;
    UnicodeString*          fPosPrefixPattern;
    UnicodeString*          fPosSuffixPattern;
    UnicodeString*          fNegPrefixPattern;
    UnicodeString*          fNegSuffixPattern;
    int32_t                 fMultiplier;
    int32_t                 fGroupingSize;
    bool_t                  fDecimalSeparatorAlwaysShown;
    /*transient*/ bool_t    fIsCurrencyFormat;
    DecimalFormatSymbols*   fSymbols;

    bool_t                  fUseExponentialNotation;
    int8_t                  fMinExponentDigits;
    bool_t                  fExponentSignAlwaysShown;

    /* If fRoundingIncrement is NULL, there is no rounding.  Otherwise, round to
     * fRoundingIncrement.getDouble().  Since this operation may be expensive,
     * we cache the result in fRoundingDouble.  All methods that update
     * fRoundingIncrement also update fRoundingDouble. */
    DigitList*              fRoundingIncrement;
    /*transient*/ double    fRoundingDouble;
    ERoundingMode           fRoundingMode;

    UChar                   fPad;
    int32_t                 fFormatWidth;
    EPadPosition            fPadPosition;

    // Constants for characters used in programmatic (unlocalized) patterns.
    static const UChar    kPatternZeroDigit;
    static const UChar    kPatternGroupingSeparator;
    static const UChar    kPatternDecimalSeparator;
    static const UChar    kPatternPerMill;
    static const UChar    kPatternPercent;
    static const UChar    kPatternDigit;
    static const UChar    kPatternSeparator;
    static const UChar    kPatternExponent;
    static const UChar    kPatternPlus;
    static const UChar    kPatternMinus;
    static const UChar    kPatternPadEscape;

    /**
     * The CURRENCY_SIGN is the standard Unicode symbol for currency.  It
     * is used in patterns and substitued with either the currency symbol,
     * or if it is doubled, with the international currency symbol.  If the
     * CURRENCY_SIGN is seen in a pattern, then the decimal separator is
     * replaced with the monetary decimal separator.
     */
    static const UChar    kCurrencySign;
    static const UChar    kQuote;

protected:
    static const int32_t  kDoubleIntegerDigits;
    static const int32_t  kDoubleFractionDigits;
};
 
#endif // _DECIMFMT
//eof