## Makefile.in for ICU data
## Copyright (C) 2016 and later: Unicode, Inc. and others.
## License & terms of use: http://www.unicode.org/copyright.html
## Copyright (c) 1999-2015, International Business Machines Corporation and
## others. All Rights Reserved.

## Source directory information
srcdir = @srcdir@
top_srcdir = @top_srcdir@

# So that you have $(top_builddir)/config.status
top_builddir = ..

## All the flags and other definitions are included here.
include $(top_builddir)/icudefs.mk

## Build directory information
# So that  $(top_builddir)/$(subdir) ~= "here"
subdir = data

#lib icu data for link
LIB_ICUDATA_NAME=$(LIBICU)$(DATA_STUBNAME)$(ICULIBSUFFIX)
LIB_STATIC_ICUDATA_NAME=$(LIBSICU)$(DATA_STUBNAME)$(ICULIBSUFFIX)

# Allow Windows to override these options
ifeq ($(PKGDATA_OPTS),)
PKGDATA_OPTS = -O $(top_builddir)/data/icupkg.inc
endif
ifeq ($(PKGDATA_VERSIONING),)
PKGDATA_VERSIONING = -r $(SO_TARGET_VERSION)
endif

# This allows all the data to be in one directory
ifeq ($(PKGDATA_MODE),dll)
ICUPKGDATA_OUTDIR = $(LIBDIR)
else
ifeq ($(PKGDATA_MODE),static)
ICUPKGDATA_OUTDIR = $(LIBDIR)
else
ICUPKGDATA_OUTDIR = $(OUTDIR)
endif
endif

CURDIR:=$(CURR_FULL_DIR)
# current directory should not be blank
ifeq ($(CURDIR),)
CURDIR=.
endif
ifeq ($(OS390BATCH),1)
PKGDATA = $(TOOLBINDIR)/pkgdata $(PKGDATA_OPTS) -z -q -c -s $(CURDIR)/out/build/$(ICUDATA_PLATFORM_NAME) -d $(ICUPKGDATA_OUTDIR)
else
PKGDATA = $(TOOLBINDIR)/pkgdata $(PKGDATA_OPTS) -q -c -s $(CURDIR)/out/build/$(ICUDATA_PLATFORM_NAME) -d $(ICUPKGDATA_OUTDIR)
endif
OS390_PDS_NAME = -z -L $(BATCH_STUB_TARGET)

ifeq ($(OS390_STUBDATA),1)
OS390PKG=package390
OS390INSTALL=install390

# Additional data for 390
OS390LIST=$(OUTTMPDIR)/icudata390.lst
OUTTMPDIR_390STUB=$(top_builddir)/data/out/tmp_390stub
endif

ifeq ($(OS390BATCH),1)
CPPFLAGS += -Wc,'ros,roc'
endif

# OBJDATADIR must be a short path (with ..'s) to the data.

ifeq ($(top_srcdir),..)
SRCDATADIR=.
else
SRCDATADIR=$(top_srcdir)/data
endif
ifeq ($(top_builddir),..)
OUTDIR=./out
else
OUTDIR=$(top_builddir)/data/out
endif

OUTTMPDIR=$(OUTDIR)/tmp
MAINBUILDDIR=$(OUTDIR)/build
BUILDDIR=$(MAINBUILDDIR)/$(ICUDATA_PLATFORM_NAME)
UNICODEDATADIR=$(SRCDATADIR)/unidata
LOCSRCDIR=$(SRCDATADIR)/locales
CURRSRCDIR=$(SRCDATADIR)/curr
CURRBLDDIR=$(BUILDDIR)/curr
LANGSRCDIR=$(SRCDATADIR)/lang
LANGBLDDIR=$(BUILDDIR)/lang
REGIONSRCDIR=$(SRCDATADIR)/region
REGIONBLDDIR=$(BUILDDIR)/region
ZONESRCDIR=$(SRCDATADIR)/zone
ZONEBLDDIR=$(BUILDDIR)/zone
UNITSRCDIR=$(SRCDATADIR)/unit
UNITBLDDIR=$(BUILDDIR)/unit
COLSRCDIR=$(SRCDATADIR)/coll
COLBLDDIR=$(BUILDDIR)/coll
RBNFSRCDIR=$(SRCDATADIR)/rbnf
RBNFBLDDIR=$(BUILDDIR)/rbnf
TRANSLITSRCDIR=$(SRCDATADIR)/translit
TRANSLITBLDDIR=$(BUILDDIR)/translit
MISCSRCDIR=$(SRCDATADIR)/misc
BRKSRCDIR=$(SRCDATADIR)/brkitr
BRKBLDDIR=$(BUILDDIR)/brkitr
DICTSRCDIR=$(BRKSRCDIR)/dictionaries
BRKRULESRCDIR=$(BRKSRCDIR)/rules
MISCSRCDIR=$(SRCDATADIR)/misc
UCMSRCDIR=$(SRCDATADIR)/mappings
SPREPSRCDIR=$(SRCDATADIR)/sprep
COMINCDIR=$(top_srcdir)/common/unicode
SRCLISTDEPS=Makefile $(srcdir)/Makefile.in
BUILD_DIRS=$(OUTDIR) $(MAINBUILDDIR) $(BUILDDIR) $(CURRBLDDIR) $(LANGBLDDIR) $(REGIONBLDDIR) $(ZONEBLDDIR) $(UNITBLDDIR) $(BRKBLDDIR) $(COLBLDDIR) $(RBNFBLDDIR) $(TRANSLITBLDDIR) $(OUTTMPDIR) $(OUTTMPDIR_390STUB) $(OUTTMPDIR)/$(CURR_TREE) $(OUTTMPDIR)/$(LANG_TREE) $(OUTTMPDIR)/$(REGION_TREE) $(OUTTMPDIR)/$(ZONE_TREE) $(OUTTMPDIR)/$(UNIT_TREE) $(OUTTMPDIR)/$(COLLATION_TREE) $(OUTTMPDIR)/$(RBNF_TREE) $(OUTTMPDIR)/$(TRANSLIT_TREE) $(OUTTMPDIR)/$(BREAK_TREE)

# Variable names for rules.mk
OUT_DIR=$(BUILDDIR)
TMP_DIR=$(OUTTMPDIR)

# relative lib links from pkgdata are the same as for tmp
TOOLDIR=$(top_builddir)/tools

## List of phony targets
.PHONY : all all-local all-recursive install install-local install-files	\
install-recursive clean clean-local clean-recursive distclean		\
distclean-local distclean-recursive dist dist-local dist-recursive	\
check check-local check-recursive clean-resindex icudata.jar	\
check-exhaustive

## Clear suffix list
.SUFFIXES :

## List of standard targets
all: all-local
install: all-local install-local 
clean: clean-local
distclean : distclean-local
dist: 
check: all check-local

check-exhaustive: check

-include Makefile.local


distclean-local: clean
	$(RMV) Makefile

all-local: build-dir icupkg.inc build-local packagedata $(POST_DATA_BUILD) $(OS390PKG)

dist-local:

clean-map:
	-test -z *.map || $(RMV) *.map

clean-local: cleanpackage cleanfiles clean-map
	$(RMV) build-dir* build-local packagedata uni-core-data

cleanfiles:
	test -z "$(CLEANFILES)" || $(RMV) $(CLEANFILES)

cleanpackage:
	$(RMV) $(OUTDIR)
	$(RMV) $(LIBDIR)/*$(LIB_ICUDATA_NAME)*.$(SO)* $(LIBDIR)/$(LIB_STATIC_ICUDATA_NAME).$(A)

check-local:
	PYTHONPATH=$(srcdir) @PYTHON@ -m buildtool.test

# Find out if we have a source archive.
# If we have that, then use that instead of building everything from scratch.
ICUDATA_SOURCE_ARCHIVE = $(wildcard $(srcdir)/in/$(ICUDATA_PLATFORM_NAME).dat)
ifeq ($(ICUDATA_SOURCE_ARCHIVE),)
ICUDATA_ARCHIVE = $(firstword $(wildcard $(srcdir)/in/$(ICUDATA_BASENAME_VERSION)*.dat))
# We don't have the data in the current endianess or charset.
# See if we can find data of any archive type,
# and convert it to the current type.
ifneq ($(ICUDATA_ARCHIVE),)
ICUDATA_SOURCE_ARCHIVE = $(OUTDIR)/$(ICUDATA_PLATFORM_NAME).dat
$(ICUDATA_SOURCE_ARCHIVE): $(ICUDATA_ARCHIVE) $(OUTDIR)
	$(INVOKE) $(TOOLBINDIR)/icupkg -t$(ICUDATA_CHAR) $(ICUDATA_ARCHIVE) $(ICUDATA_SOURCE_ARCHIVE)
endif
else
ifneq ($(ENABLE_STATIC),YES)
ifeq ($(PKGDATA_MODE),common)
# We have a source data common archive in the native endianess,
# and it's what we want to build. Try to not run any of ICU's tools.
ICUDATA_SOURCE_IS_NATIVE_TARGET=YES
endif
endif
endif

packagedata: icupkg.inc $(PKGDATA_LIST) build-local
ifneq ($(ENABLE_STATIC),)
ifeq ($(PKGDATA_MODE),dll)
	$(PKGDATA_INVOKE) $(PKGDATA) -e $(ICUDATA_ENTRY_POINT) -T $(OUTTMPDIR) -p $(ICUDATA_NAME) $(PKGDATA_LIBSTATICNAME) -m static $(PKGDATA_VERSIONING) $(PKGDATA_LIST)
endif
endif
ifneq ($(ICUDATA_SOURCE_IS_NATIVE_TARGET),YES)
	$(PKGDATA_INVOKE) $(PKGDATA) -e $(ICUDATA_ENTRY_POINT) -T $(OUTTMPDIR) -p $(ICUDATA_NAME) -m $(PKGDATA_MODE) $(PKGDATA_VERSIONING) $(PKGDATA_LIBNAME) $(PKGDATA_LIST)
else
	$(INSTALL_DATA) $(ICUDATA_SOURCE_ARCHIVE) $(OUTDIR)
endif
	echo timestamp > $@

## Install ICU data.
install-local: $(PKGDATA_LIST) ./icupkg.inc packagedata $(OS390INSTALL)
	$(MKINSTALLDIRS) $(TMPDATADIR) $(DESTDIR)$(ICUPKGDATA_DIR)
ifeq ($(PKGDATA_MODE),files)
	$(MKINSTALLDIRS) $(ICUPKGDATA_DIR)/$(ICUDATA_NAME)
	$(MKINSTALLDIRS) $(ICUPKGDATA_DIR)/$(ICUDATA_NAME)/$(CURR_TREE)
	$(MKINSTALLDIRS) $(ICUPKGDATA_DIR)/$(ICUDATA_NAME)/$(LANG_TREE)
	$(MKINSTALLDIRS) $(ICUPKGDATA_DIR)/$(ICUDATA_NAME)/$(REGION_TREE)
	$(MKINSTALLDIRS) $(ICUPKGDATA_DIR)/$(ICUDATA_NAME)/$(ZONE_TREE)
	$(MKINSTALLDIRS) $(ICUPKGDATA_DIR)/$(ICUDATA_NAME)/$(UNIT_TREE)
	$(MKINSTALLDIRS) $(ICUPKGDATA_DIR)/$(ICUDATA_NAME)/$(BREAK_TREE)
	$(MKINSTALLDIRS) $(ICUPKGDATA_DIR)/$(ICUDATA_NAME)/$(COLLATION_TREE)
	$(MKINSTALLDIRS) $(ICUPKGDATA_DIR)/$(ICUDATA_NAME)/$(RBNF_TREE)
	$(MKINSTALLDIRS) $(ICUPKGDATA_DIR)/$(ICUDATA_NAME)/$(TRANSLIT_TREE)
endif
ifneq ($(ENABLE_STATIC),)
ifeq ($(PKGDATA_MODE),dll)
	$(PKGDATA_INVOKE) $(PKGDATA) -m static -e $(ICUDATA_ENTRY_POINT) -T $(OUTTMPDIR) -s $(BUILDDIR) -p $(ICUDATA_NAME) $(PKGDATA_LIBSTATICNAME) $(PKGDATA_LIST) -I $(ICUPKGDATA_INSTALL_LIBDIR)
endif
endif
ifneq ($(ICUDATA_SOURCE_IS_NATIVE_TARGET),YES)
	$(PKGDATA_INVOKE) $(PKGDATA) -m $(PKGDATA_MODE) $(PKGDATA_VERSIONING) -e $(ICUDATA_ENTRY_POINT) -T $(OUTTMPDIR) -s $(BUILDDIR) -p $(ICUDATA_NAME) $(PKGDATA_LIBNAME) $(PKGDATA_LIST) -I $(ICUPKGDATA_INSTALL_DIR)
else
	$(INSTALL_DATA) $(ICUDATA_SOURCE_ARCHIVE) $(DESTDIR)$(ICUPKGDATA_DIR)
endif


####
####
#### 390 support
install390: package390
	$(MKINSTALLDIRS) $(TMPDATADIR) $(DESTDIR)$(libdir)
	$(INVOKE) $(PKGDATA) -s $(BUILDDIR)$(STUB_SUFFIX) -T $(OUTTMPDIR_390STUB) -p $(ICUDATA_NAME)$(STUB_SUFFIX) $(PKGDATA_LIBNAME)$(STUB_SUFFIX) -e $(ICUDATA_ENTRY_POINT) $(OS390LIST) -m dll $(PKGDATA_VERSIONING) -I $(DESTDIR)$(ICUPKGDATA_DIR)
ifeq ($(PKGDATA_MODE),dll)
	$(INSTALL-L) $(ICUPKGDATA_OUTDIR)/$(FINAL_IMPORT_LIB) $(DESTDIR)$(ICUPKGDATA_DIR)/$(FINAL_IMPORT_LIB)
endif

#### $(LIB_ICUDATA_NAME)$(STUB_SUFFIX) is the subset data for batch mode
package390: $(OUTTMPDIR)/icudata390.lst $(PKGDATA_LIST) ./icupkg.inc packagedata
	ln -s $(ICUDATA_NAME) $(OUTDIR)/build/$(ICUDATA_NAME)$(STUB_SUFFIX)
	$(INVOKE) $(PKGDATA) -s $(BUILDDIR)$(STUB_SUFFIX) -T $(OUTTMPDIR_390STUB) -p $(ICUDATA_NAME)$(STUB_SUFFIX) $(PKGDATA_LIBNAME)$(STUB_SUFFIX) -e $(ICUDATA_ENTRY_POINT) $(OS390LIST) -m dll $(PKGDATA_VERSIONING)
	cp $(ICUPKGDATA_OUTDIR)/$(LIB_ICUDATA_NAME)$(STUB_SUFFIX).$(SO) $(top_builddir)/stubdata/$(LIB_ICUDATA_NAME)$(STUB_SUFFIX).$(SO)


## Include the main build rules for data files
include $(top_builddir)/$(subdir)/rules.mk


ifeq ($(ENABLE_SO_VERSION_DATA),1)
ifeq ($(PKGDATA_MODE),dll)
SO_VERSION_DATA = $(OUTTMPDIR)/icudata.res
$(SO_VERSION_DATA) : $(MISCSRCDIR)/icudata.rc | build-dir
ifeq ($(MSYS_RC_MODE),1)
	rc.exe -i$(srcdir)/../common -i$(top_builddir)/common -fo$@ $(CPPFLAGS) $<
else
	rc.exe /i$(srcdir)/../common /i$(top_builddir)/common /fo$@ $(CPPFLAGS) $(SOURCE_FILE)
endif
endif
endif

PKGDATA_LIST = $(TMP_DIR)/icudata.lst


##### Define all the data files. the build rule that depends on them is below.
# X_FILES_SHORT = just the base names (for lists)
# X_FILES = full paths (for dependency)

## DAT files - Misc. data files.
#  2005-may-05 Removed Unicode properties files (unorm.icu, uprops.icu, ucase.icu, ubidi.icu)
#  from data build. See Jitterbug 4497. (makedata.mak revision 1.117)
#  2010-dec Removed pnames.icu.
# These are now hardcoded in ICU4C and only loaded in ICU4J.
#
DAT_FILES_SHORT=unames.icu cnvalias.icu coll/ucadata.icu nfkc.nrm nfkc_cf.nrm uts46.nrm
DAT_FILES=$(DAT_FILES_SHORT:%=$(BUILDDIR)/%)

## All generated files
ALL_FILES = $(DAT_FILES) $(CNV_FILES) $(CNV_FILES_SPECIAL) $(BRK_FILES) $(DICT_FILES) $(RES_FILES) $(INDEX_RES_FILE) $(CURR_FILES) $(LANG_FILES) $(REGION_FILES) $(ZONE_FILES) $(UNIT_FILES) $(COLLATION_FILES) $(BRK_RES_FILES) $(RBNF_FILES) $(TRANSLIT_FILES) $(SPREP_FILES) $(CFU_FILES)
ALL_INDEX_SRC_FILES = $(PKGDATA_LIST) $(INDEX_FILE) $(CURR_INDEX_FILE) $(LANG_INDEX_FILE) $(REGION_INDEX_FILE) $(ZONE_INDEX_FILE) $(UNIT_INDEX_FILE) $(COLLATION_INDEX_FILE) $(BRK_RES_INDEX_FILE) $(RBNF_INDEX_FILE)
# a list to use in the .lst files (package-relative)
COLL_FILES_LIST=$(COLLATION_FILES_SHORT) $(COLLATION_INDEX_RES_SHORT)
BRK_FILES_LIST=$(BRK_FILES_SHORT) $(BRK_RES_FILES_SHORT) $(BRK_RES_INDEX_RES_SHORT) $(DICT_FILES_SHORT)
LOCALE_FILES_LIST= $(RES_FILES_SHORT) $(LANG_FILES_SHORT) $(REGION_FILES_SHORT) $(ZONE_FILES_SHORT) $(UNIT_FILES_SHORT)
MISC_FILES_LIST=$(DAT_FILES_SHORT) $(CNV_FILES_SHORT) $(CNV_FILES_SHORT_SPECIAL) $(CURR_FILES_SHORT) $(RBNF_FILES_SHORT) $(RBNF_INDEX_RES_SHORT) $(TRANSLIT_FILES_SHORT) $(SPREP_FILES_SHORT) $(CFU_FILES_SHORT)
UNI_CORE_DATA=pnames.icu uprops.icu ucase.icu ubidi.icu nfc.nrm
UNI_CORE_TARGET_DATA=$(UNI_CORE_DATA:%=$(BUILDDIR)/%)

ifneq ($(INCLUDE_UNI_CORE_DATA),)
MISC_FILES_LIST+=$(UNI_CORE_DATA)
build-local: uni-core-data
	echo timestamp > $@
endif

#####################################################
# General data build rules

## Files to remove for 'make clean'
CLEANFILES = *~ icupkg.inc *.x

ifeq ($(ICUDATA_SOURCE_ARCHIVE),)
build-local: build-dir $(SO_VERSION_DATA) $(ICUDATA_ALL_OUTPUT_FILES) $(PKGDATA_LIST) $(OS390LIST)
	echo timestamp > $@
else
build-local: build-dir $(SO_VERSION_DATA) $(PKGDATA_LIST) $(OS390LIST)
	echo timestamp > $@
$(PKGDATA_LIST): $(SRCLISTDEPS) $(ICUDATA_SOURCE_ARCHIVE)
ifneq ($(ICUDATA_SOURCE_IS_NATIVE_TARGET),YES)
	@echo "Unpacking $(ICUDATA_SOURCE_ARCHIVE) and generating $@ (list of data files)"
	@-$(RMV) $@
	$(INVOKE) $(TOOLBINDIR)/icupkg -d $(BUILDDIR) --list -x \* $(ICUDATA_SOURCE_ARCHIVE) -o $@
else
	@echo "$@" > $@
endif
endif


$(BUILD_DIRS): build-dir

build-dir:
	@-$(RMV) $@
	echo timestamp > $@.tmp
	@list='$(BUILD_DIRS)'; \
	for dir in $$list; do \
	  if ! test -d $$dir; then \
	    echo $(MKINSTALLDIRS) $(BUILD_DIRS); \
	    $(MKINSTALLDIRS) $(BUILD_DIRS); \
	  fi; \
	done
	mv $@.tmp $@

# The | is an order-only prerequisite. This helps when the -j option is used,
# and we don't want the files to be built before the directories are built.
ifneq ($(filter order-only,$(.FEATURES)),)
$(ALL_FILES) $(ALL_INDEX_SRC_FILES): | build-dir
endif

# if the tzcode directory contains a new tzdata*.tar.gz file, use it for zoneinfo
ifeq ($(TZDATA),)
TZDATA = $(firstword $(wildcard $(top_builddir)/tools/tzcode/tzdata*.tar.gz) $(wildcard $(top_srcdir)/tools/tzcode/tzdata*.tar.gz))
endif

# TODO: Make the TZDATA override part of Python buildtool
ifneq ($(TZDATA),)

TZCODE_DIR=$(top_builddir)/tools/tzcode
ZONEINFO=$(TZCODE_DIR)/zoneinfo64.txt

# Override the normal genrb for zoneinfo to always pull from
# icu/source/tools/tzcode/zoneinfo64.txt
$(BUILDDIR)/zoneinfo64.res: $(ZONEINFO) $(TOOLBINDIR)/genrb$(TOOLEXEEXT) | $(BUILDDIR)/cnvalias.icu
	@echo Note: $(MISCSRCDIR)/zoneinfo.txt is IGNORED because $(TZDATA) is present.
	$(INVOKE) $(TOOLBINDIR)/genrb $(GENRBOPTS) -q -i $(BUILDDIR) -d $(BUILDDIR) $(ZONEINFO)

# Create the tzcode tool and zoneinfo as needed.
$(ZONEINFO): $(TZDATA)
	@echo "$(MAKE)[$(MAKELEVEL)]: Making \`$(ZONEINFO)' in \`$(TZCODE_DIR)'"; \
	(cd $(TZCODE_DIR) && $(MAKE)) || exit; \

# end of zoneinfo-generation
endif

# The core Unicode properties files (pnames.icu, uprops.icu, ucase.icu, ubidi.icu)
# are hardcoded in the common DLL and therefore not included in the data package any more.
# They are not built by default but need to be built for ICU4J data and for getting the .c source files
# when updating the Unicode data.
uni-core-data: build-dir $(UNI_CORE_TARGET_DATA)
	@echo Unicode .icu files built to $(BUILDDIR)
	echo timestamp > $@

# Build the ICU4J icudata.jar.
# Command line:
#   (Run this from the output data folder which may not be .../source/data in an out-of-source build.)
#   ~/svn.icu/trunk/source/data> make JAR=jar ICU4J_ROOT=~/svn.icu4j/trunk icudata.jar
# You can omit the ICU4J_ROOT for just building the .jar files without copying them.
# You can omit the JAR if it's just jar.
JAR=jar

# For building the testdata.jar see ../test/testdata/Makefile.

ICU4J_TZDATA=$(OUTDIR)/icu4j/icutzdata.jar
ICU4J_TZDATA_FILES=zoneinfo64 metaZones timezoneTypes windowsZones
ICU4J_DATA_DIRNAME=com/ibm/icu/impl/data/$(ICUDATA_BASENAME_VERSION)b
ICU4J_TZDATA_PATHS=$(ICU4J_TZDATA_FILES:%="$(ICU4J_DATA_DIRNAME)/%.res")

# Targets for prebuilt Unicode data
$(BUILDDIR)/%.icu: $(SRCDATADIR)/in/%.icu | $(DIRS)
	$(INVOKE) $(TOOLBINDIR)/icupkg -t$(ICUDATA_CHAR) $< $@

$(BUILDDIR)/nfc.nrm: $(SRCDATADIR)/in/nfc.nrm | $(DIRS)
	$(INVOKE) $(TOOLBINDIR)/icupkg -t$(ICUDATA_CHAR) $< $@

# generate icu4j-related data to $(OUTDIR)/icu4j/com/ibm/icu/impl/data/...
generate-data: build-dir packagedata $(OUTTMPDIR)/$(ICUDATA_PLATFORM_NAME).dat uni-core-data
	mkdir -p $(OUTDIR)/icu4j/$(ICU4J_DATA_DIRNAME)
	mkdir -p $(OUTDIR)/icu4j/tzdata/$(ICU4J_DATA_DIRNAME)
	echo $(UNI_CORE_DATA) > $(OUTDIR)/icu4j/add.txt
	$(INVOKE) $(TOOLBINDIR)/icupkg $(OUTTMPDIR)/$(ICUDATA_PLATFORM_NAME).dat $(OUTDIR)/icu4j/$(ICUDATA_BASENAME_VERSION)b.dat -a $(OUTDIR)/icu4j/add.txt -s $(BUILDDIR) -x '*' -tb -d $(OUTDIR)/icu4j/$(ICU4J_DATA_DIRNAME)
	mv $(ICU4J_TZDATA_PATHS:%=$(OUTDIR)/icu4j/%) "$(OUTDIR)/icu4j/tzdata/$(ICU4J_DATA_DIRNAME)"

$(OUTDIR)/icu4j/icutzdata.jar: generate-data
	$(JAR) cf $(OUTDIR)/icu4j/icutzdata.jar -C $(OUTDIR)/icu4j/tzdata $(ICU4J_DATA_DIRNAME)/

# Build icudata.jar:
# - add the uni-core-data to the ICU package
# - swap the ICU data
# - extract all data items
# - package them into the .jar file
$(OUTDIR)/icu4j/icudata.jar: generate-data
	$(JAR) cf $(OUTDIR)/icu4j/icudata.jar -C $(OUTDIR)/icu4j $(ICU4J_DATA_DIRNAME)/

ICU4J_DATA=$(OUTDIR)/icu4j/icudata.jar

ifdef ICU4J_ROOT

ICU4J_DATA_INSTALLED=$(ICU4J_ROOT)/main/shared/data/icudata.jar $(ICU4J_ROOT)/main/shared/data/icutzdata.jar

$(ICU4J_ROOT)/main/shared/data/icudata.jar: $(OUTDIR)/icu4j/icudata.jar
	mkdir -p $(ICU4J_ROOT)/main/shared/data
	cp $(OUTDIR)/icu4j/icudata.jar $(ICU4J_ROOT)/main/shared/data

$(ICU4J_ROOT)/main/shared/data/icutzdata.jar: $(OUTDIR)/icu4j/icutzdata.jar
	mkdir -p $(ICU4J_ROOT)/main/shared/data
	cp $(OUTDIR)/icu4j/icutzdata.jar $(ICU4J_ROOT)/main/shared/data

icu4j-data-install: $(ICU4J_DATA_INSTALLED)

else

icu4j-data-install: icu4j-data
	@echo data is built into $(OUTDIR)/icu4j
	@echo '** Error:' ICU4J_ROOT was not set, could not install
	exit 1

endif

icu4j-data: $(ICU4J_DATA) $(ICU4J_TZDATA)


###################################################################
Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
	cd $(top_builddir) \
	&& CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status

icupkg.inc: pkgdataMakefile
	$(MAKE) -f pkgdataMakefile

pkgdataMakefile:
	cd $(top_builddir) \
	&& CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status

###########
########### 390 (z/OS) support
UCMFILES390=ebcdic-xml-us.ucm ibm-37_P100-1995.ucm ibm-1047_P100-1995.ucm ibm-4909_P100-1999.ucm
# used to depend on pnames.icu uprops.icu ucase.icu ubidi.icu
# These are now hardcoded in ICU4C and only loaded in ICU4J.
ALLFILES390=cnvalias.icu $(UCMFILES390:.ucm=.cnv)

$(OUTTMPDIR)/icudata390.lst: $(SRCLISTDEPS)
	@echo "generating $@ (list of 390 data files)"
	@-$(RMV) $@
	@for file in $(ALLFILES390); do \
	  echo $$file >> $@; \
	done;

ifeq ($(POST_DATA_BUILD), os400-data-rebind)
os400-data-rebind: $(LIBICUUC)

$(LIBICUUC): $(LIBICUDT)
	$(RMV) $(LIBICUUC)
	(cd ../common && $(MAKE) RECURSIVE=YES) || exit;
endif