{: .no_toc }
{: .no_toc .text-delta }
The previous section demonstrated many of the requirements imposed on string comparison routines that try to correctly collate strings according to conventions of more than a hundred different languages, written in many different scripts. This section describes the principles and architecture behind the ICU Collation Service.
Sort keys are most useful in databases, where the overhead of calling a function for each comparison is very large.
Generating a sort key from a Collator is many times more expensive than doing a compare with the Collator (for common use cases). That's if the two functions are called from Java or C. So for those languages, unless there is a very large number of comparisons, it is better to call the compare function.
Here is an example, with a little back-of-the-envelope calculation. Let‘s suppose that with a given language on a given platform, the compare performance (CP) is 100 faster than sortKey performance (SP), and that you are doing a binary search of a list with 1,000 elements. The binary comparison performance is BP. We’d do about 10 comparisons, getting:
compare: 10 * CP
sortkey: 1 * SP + 10 * BP
Even if BP is free, compare would be better. One has to get up to where log2(n) = 100 before they break even.
But even this calculation is only a rough guide. First, the binary comparison is not completely free. Secondly, the performance of compare function varies radically with the source data. We optimized for maximizing performance of collation in sorting and binary search, so comparing strings that are “close” is optimized to be much faster than comparing strings that are “far away”. That optimization is important because normal sort/lookup operations compare close strings far more often -- think of binary search, where the last few comparisons are always with the closest strings. So even the above calculation is not very accurate.
In general, when comparing and sorting objects, some properties can take precedence over others. For example, in geometry, you might consider first the number of sides a shape has, followed by the number of sides of equal length. This causes triangles to be sorted together, then rectangles, then pentagons, etc. Within each category, the shapes would be ordered according to whether they had 0, 2, 3 or more sides of the same length. However, this is not the only way the shapes can be sorted. For example, it might be preferable to sort shapes by color first, so that all red shapes are grouped together, then blue, etc. Another approach would be to sort the shapes by the amount of area they enclose.
Similarly, character strings have properties, some of which can take precedence over others. There is more than one way to prioritize the properties.
For example, a common approach is to distinguish characters first by their unadorned base letter (for example, without accents, vowels or tone marks), then by accents, and then by the case of the letter (upper vs. lower). Ideographic characters might be sorted by their component radicals and then by the number of strokes it takes to draw the character. An alternative ordering would be to sort these characters by strokes first and then by their radicals.
The ICU Collation Service supports many levels of comparison (named “Levels”, but also known as “Strengths”). Having these categories enables ICU to sort strings precisely according to local conventions. However, by allowing the levels to be selectively employed, searching for a string in text can be performed with various matching conditions.
Performance optimizations have been made for ICU collation with the default level settings. Performance specific impacts are discussed in the Performance section below.
Following is a list of the names for each level and an example usage:
Primary Level: Typically, this is used to denote differences between base characters (for example, “a” < “b”). It is the strongest difference. For example, dictionaries are divided into different sections by base character. This is also called the level-1 strength.
Secondary Level: Accents in the characters are considered secondary differences (for example, “as” < “às” < “at”). Other differences between letters can also be considered secondary differences, depending on the language. A secondary difference is ignored when there is a primary difference anywhere in the strings. This is also called the level-2 strength. Note: In some languages (such as Danish), certain accented letters are considered to be separate base characters. In most languages, however, an accented letter only has a secondary difference from the unaccented version of that letter.
Tertiary Level: Upper and lower case differences in characters are distinguished at the tertiary level (for example, “ao” < “Ao” < “aò”). In addition, a variant of a letter differs from the base form on the tertiary level (such as “A” and “Ⓐ”). Another example is the difference between large and small Kana. A tertiary difference is ignored when there is a primary or secondary difference anywhere in the strings. This is also called the level-3 strength.
Quaternary Level: When punctuation is ignored (see Ignoring Punctuations (§)) at level 1-3, an additional level can be used to distinguish words with and without punctuation (for example, “ab” < “a-b” < “aB”). This difference is ignored when there is a primary, secondary or tertiary difference. This is also known as the level-4 strength. The quaternary level should only be used if ignoring punctuation is required or when processing Japanese text (see Hiragana processing (§)).
Identical Level: When all other levels are equal, the identical level is used as a tiebreaker. The Unicode code point values of the NFD form of each string are compared at this level, just in case there is no difference at levels 1-4. For example, Hebrew cantillation marks are only distinguished at this level. This level should be used sparingly, as only code point value differences between two strings is an extremely rare occurrence. Using this level substantially decreases the performance for both incremental comparison and sort key generation (as well as increasing the sort key length). It is also known as level 5 strength.
Some languages require words to be ordered on the secondary level according to the last accent difference, as opposed to the first accent difference. This was previously the default for all French locales, based on some French dictionary ordering traditions, but is currently only applicable to Canadian French (locale fr_CA), for conformance with the Canadian sorting standard. The difference in ordering is only noticeable for a small number of pairs of real words. For more information see UCA: Contextual Sensitivity.
Example:
Forward secondary | Backward secondary |
---|---|
cote | cote |
coté | côte |
côte | coté |
côté | côté |
A contraction is a sequence consisting of two or more letters. It is considered a single letter in sorting.
For example, in the traditional Spanish sorting order, “ch” is considered a single letter. All words that begin with “ch” sort after all other words beginning with “c”, but before words starting with “d”.
Other examples of contractions are “ch” in Czech, which sorts after “h”, and “lj” and “nj” in Croatian and Latin Serbian, which sort after “l” and “n” respectively.
Example:
Order without contraction | Order with contraction “lj” sorting after letter “l” |
---|---|
la | la |
li | li |
lj | lk |
lja | lz |
ljz | lj |
lk | lja |
lz | ljz |
ma | ma |
Contracting sequences such as the above are not very common in most languages.
:point_right: Note Since ICU 2.2, and as required by the UCA, if a completely ignorable code point appears in text in the middle of contraction, it will not break the contraction. For example, in Czech sorting, cU+0000h will sort as it were ch.
If a letter sorts as if it were a sequence of more than one letter, it is called an expansion.
For example, in German phonebook sorting (de@collation=phonebook or BCP 47 de-u-co-phonebk), “ä” sorts as though it were equivalent to the sequence “ae.” All words starting with “ä” will sort between words starting with “ad” and words starting with “af”.
In the case of Unicode encoding, characters can often be represented either as pre-composed characters or in decomposed form. For example, the letter “à” can be represented in its decomposed (a+`) and pre-composed (à) form. Most applications do not want to distinguish text by the way it is encoded. A search for “à” should find all instances of the letter, regardless of whether the instance is in pre-composed or decomposed form. Therefore, either form of the letter must result in the same sort ordering. The architecture of the ICU Collation Service supports this.
It is possible to have contractions that produce expansions.
One example occurs in Japanese, where the vowel with a prolonged sound mark is treated to be equivalent to the long vowel version:
カアー<<< カイー and
キイー<<< キイー
:point_right: Note Since ICU 2.0 Japanese tailoring uses prefix analysis instead of contraction producing expansions.
In the section on expansions, we discussed that text in Unicode can often be represented in either pre-composed or decomposed forms. There are other types of equivalences possible with Unicode, including Canonical and Compatibility. The process of Normalization ensures that text is written in a predictable way so that searches are not made unnecessarily complicated by having to match on equivalences. Not all text is normalized, however, so it is useful to have a collation service that can address text that is not normalized, but do so with efficiency.
The ICU Collation Service handles un-normalized text properly, producing the same results as if the text were normalized.
In practice, most data that is encountered is in normalized or semi-normalized form already. The ICU Collation Service is designed so that it can process a wide range of normalized or un-normalized text without a need for normalization processing. When a case is encountered that requires normalization, the ICU Collation Service drops into code specific to this purpose. This maximizes performance for the majority of text that does not require normalization.
In addition, if the text is known with certainty not to contain un-normalized text, then even the overhead of checking for normalization can be eliminated. The ICU Collation Service has the ability to turn Normalization Checking either on or off. If Normalization Checking is turned off, it is the user's responsibility to insure that all text is already in the appropriate form. This is true in a great majority of the world languages, so normalization checking is turned off by default for most locales.
If the text requires normalization processing, Normalization Checking should be on. Any language that uses multiple combining characters such as Arabic, ancient Greek, Hebrew, Hindi, Thai or Vietnamese either requires Normalization Checking to be on, or the text to go through a normalization process before collation.
For more information about Normalization related reordering please see Unicode Technical Note #5 and UAX #15.
:point_right: Note ICU supports two modes of normalization: on and off. Java.text.* classes offer compatibility decomposition mode, which is not supported in ICU.
In some cases, punctuation can be ignored while searching or sorting data. For example, this enables a search for “biweekly” to also return instances of “bi-weekly”. In other cases, it is desirable for punctuated text to be distinguished from text without punctuation, but to have the text sort close together.
These two behaviors can be accomplished if there is a way for a character to be ignored on all levels except for the quaternary level. If this is the case, then two strings which compare as identical on the first three levels (base letter, accents, and case) are then distinguished at the fourth level based on their punctuation (if any). If the comparison function ignores differences at the fourth level, then strings that differ by punctuation only are compared as equal.
The following table shows the results of sorting a list of terms in 3 different ways. In the first column, punctuation characters (space " “, and hyphen “-”) are not ignored (” " < “-” < “b”). In the second column, punctuation characters are ignored in the first 3 levels and compared only in the fourth level. In the third column, punctuation characters are ignored in the first 3 levels and the fourth level is not considered. In the last column, punctuated terms are equivalent to the identical terms without punctuation.
For more options and details see the “Ignore Punctuation” Options page.
Non-ignorable | Ignorable and Quaternary strength | Ignorable and Tertiary strength |
---|---|---|
black bird | black bird | black bird |
black Bird | black-bird | black-bird |
black birds | blackbird | blackbird |
black-bird | black Bird | black Bird |
black-Bird | black-Bird | black-Bird |
black-birds | blackBird | blackBird |
blackbird | black birds | black birds |
blackBird | black-birds | black-birds |
blackbirds | blackbirds | blackbirds |
:point_right: Note The strings with the same font format in the last column are compared as equal by ICU Collator.
Since ICU 2.2 and as prescribed by the UCA, primary ignorable code points that follow shifted code points will be completely ignored. This means that an accent following a space will compare as if it was a space alone.
The tertiary level is used to distinguish text by case, by small versus large Kana, and other letter variants as noted above.
Some applications prefer to emphasize case differences so that words starting with the same case sort together. Some Japanese applications require the difference between small and large Kana be emphasized over other tertiary differences.
The UCA does not provide means to separate out either case or Kana differences from the remaining tertiary differences. However, the ICU Collation Service has two options that help in customize case and/or Kana differences. Both options are turned off by default.
The Case-first option makes case the most significant part of the tertiary level. Primary and secondary levels are unaffected. With this option, words starting with the same case sort together. The Case-first option can be set to make either lowercase sort before uppercase or uppercase sort before lowercase.
Note: The case-first option does not constitute a separate level; it is simply a reordering of the tertiary level.
ICU makes use of the following three case categories for sorting
uppercase: “ABC”
mixed case: “Abc”, “aBc”
normal (lowercase or no case): “abc”, “123”
Mixed case is always sorted between uppercase and normal case when the “case-first” option is set.
The Case Level option makes a separate level for case differences. This is an extra level positioned between secondary and tertiary. The case level is used in Japanese to make the difference between small and large Kana more important than the other tertiary differences. It also can be used to ignore other tertiary differences, or even secondary differences. This is especially useful in matching. For example, if the strength is set to primary only (level-1) and the case level is turned on, the comparison ignores accents and tertiary differences except for case. The contents of the case level are affected by the case-first option.
The case level is independent from the strength of comparison. It is possible to have a collator set to primary strength with the case level turned on. This provides for comparison that takes into account the case differences, while at the same time ignoring accents and tertiary differences other than case. This may be used in searching.
Example:
Case-first off, Case level off
apple
ⓐⓟⓟⓛⓔ
Abernathy
ⒶⒷⒺⓇⓃⒶⓉⒽⓎ
ähnlich
Ähnlichkeit
Lowercase-first, Case level off
apple
ⓐⓟⓟⓛⓔ
ähnlich
Abernathy
ⒶⒷⒺⓇⓃⒶⓉⒽⓎ
Ähnlichkeit
Uppercase-first, Case level off
Abernathy
ⒶⒷⒺⓇⓃⒶⓉⒽⓎ
Ähnlichkeit
apple
ⓐⓟⓟⓛⓔ
ähnlich
Lowercase-first, Case level on
apple
Abernathy
ⓐⓟⓟⓛⓔ
ⒶⒷⒺⓇⓃⒶⓉⒽⓎ
ähnlich
Ähnlichkeit
Uppercase-first, Case level on
Abernathy
apple
ⒶⒷⒺⓇⓃⒶⓉⒽⓎ
ⓐⓟⓟⓛⓔ
Ähnlichkeit
ähnlich
Script reordering allows scripts and some other groups of characters to be moved relative to each other. This reordering is done on top of the DUCET/CLDR standard collation order. Reordering can specify groups to be placed at the start and/or the end of the collation order.
By default, reordering codes specified for the start of the order are placed in the order given after several special non-script blocks. These special groups of characters are space, punctuation, symbol, currency, and digit. Script groups can be intermingled with these special non-script groups if those special groups are explicitly specified in the reordering.
The special code others
stands for any script that is not explicitly mentioned in the list. Anything that is after others will go at the very end of the list in the order given. For example, [Grek, others, Latn]
will result in an ordering that puts all scripts other than Greek and Latin between them.
Note: All examples below use the string equivalents for the scripts and reorder codes that would be used in collator rules. The script and reorder code constants that would be used in API calls will be different.
Example 1:
set reorder code - [Grek]
result - [space, punctuation, symbol, currency, digit, Grek, others]
Example 2:
set reorder code - [Grek]
result - [space, punctuation, symbol, currency, digit, Grek, others]
followed by: set reorder code - [Hani]
result - [space, punctuation, symbol, currency, digit, Hani, others]
That is, setting a reordering always modifies the DUCET/CLDR order, replacing whatever was previously set, rather than adding on to it. In order to cumulatively modify an ordering, you have to retrieve the existing ordering, modify it, and then set it.
Example 3:
set reorder code - [others, digit]
result - [space, punctuation, symbol, currency, others, digit]
Example 4:
set reorder code - [space, Grek, punctuation]
result - [symbol, currency, digit, space, Grek, punctuation, others]
Example 5:
set reorder code - [Grek, others, Hani]
result - [space, punctuation, symbol, currency, digit, Grek, others, Hani]
Example 6:
set reorder code - [Grek, others, Hani, symbol, Tglg]
result - [space, punctuation, currency, digit, Grek, others, Hani, symbol, Tglg]
followed by:
set reorder code - [NONE]
result - DUCET/CLDR
Example 7:
set reorder code - [Grek, others, Hani, symbol, Tglg]
result - [space, punctuation, currency, digit, Grek, others, Hani, symbol, Tglg]
followed by:
set reorder code - [DEFAULT]
result - original reordering for the locale which may or may not be DUCET/CLDR
Example 8:
set reorder code - [Grek, others, Hani, symbol, Tglg]
result - [space, punctuation, currency, digit, Grek, others, Hani, symbol, Tglg]
followed by:
set reorder code - []
result - original reordering for the locale which may or may not be DUCET/CLDR
Example 9:
set reorder code - [Hebr, Phnx]
result - error
Beginning with ICU 55, scripts only reorder together if they are primary-equal, for example Hiragana and Katakana.
ICU 4.8-54:
Japanese standard JIS X 4061 requires two changes to the collation procedures: special processing of Hiragana characters and (for performance reasons) prefix analysis of text.
JIS X 4061 standard requires more levels than provided by the UCA. To offer conformant sorting order, ICU uses the quaternary level to distinguish between Hiragana and Katakana. Hiragana symbols are given smaller values than Katakana symbols on quaternary level, thus causing Hiragana sequences to sort before corresponding Katakana sequences.
Another characteristics of sorting according to the JIS X 4061 is a large number of contractions followed by expansions (see Contractions Producing Expansions). This causes all the Hiragana and Katakana codepoints to be treated as contractions, which reduces performance. The solution we adopted introduces the prefix concept which allows us to improve the performance of Japanese sorting. More about this can be found in the customization chapter .
UCA requires that certain Thai and Lao prevowels be reordered with a code point following them. This option is always on in the ICU implementation, as prescribed by the UCA.
This rule takes effect when:
A Thai vowel of the range \U0E40-\U0E44 precedes a Thai consonant of the range \U0E01-\U0E2E or
A Lao vowel of the range \U0EC0-\U0EC4 precedes a Lao consonant of the range \U0E81-\U0EAE. In these cases the vowel is placed after the consonant for collation purposes.
:point_right: Note There is a difference between java.text.* classes and ICU in regard to Thai reordering. Java.text.* classes allow tailorings to turn off reordering by using the ‘!’ modifier. ICU ignores the ‘!’ modifier and always reorders Thai prevowels.
In many database products, fields are padded with null. To get correct results, the input to a Collator should omit any superfluous trailing padding spaces. The problem arises with contractions, expansions, or normalization. Suppose that there are two fields, one containing “aed” and the other with “äd”. German phonebook sorting (de@collation=phonebook or BCP 47 de-u-co-phonebk) will compare “ä” as if it were “ae” (on a primary level), so the order will be “äd” < “aed”. But if both fields are padded with spaces to a length of 3, then this will reverse the order, since the first will compare as if it were one character longer. In other words, when you start with strings 1 and 2
1 | a | e | d | <space> |
---|---|---|---|---|
2 | ä | d | <space> | <space> |
they end up being compared on a primary level as if they were 1' and 2'
1' | a | e | d | <space> | |
---|---|---|---|---|---|
2' | a | e | d | <space> | <space> |
Since 2' has an extra character (the extra space), it counts as having a primary difference when it shouldn't. The correct result occurs when the trailing padding spaces are removed, as in 1" and 2"
1" | a | e | d |
---|---|---|---|
2" | a | e | d |
Starting with ICU 54, the following naming scheme and its API functions are deprecated. Use ucol_open()
with language tag collation keywords instead (see Collation API Details). For example, ucol_open("de-u-co-phonebk-ka-shifted", &errorCode)
for German Phonebook order with “ignore punctuation” mode.
When collating or matching text, a number of attributes can be used to affect the desired result. The following describes the attributes, their values, their effects, their normal usage, and the string comparison performance and sort key length implications. It also includes single-letter abbreviations for both the attributes and their values. These abbreviations allow a ‘short-form’ specification of a set of collation options, such as “UCA4.0.0_AS_LSV_S”, which can be used to specific that the desired options are: UCA version 4.0.0; ignore spaces, punctuation and symbols; use Swedish linguistic conventions; compare case-insensitively.
A number of attribute values are common across different attributes; these include Default (abbreviated as D), On (O), and Off (X). Unless otherwise stated, the examples use the UCA alone with default settings.
:point_right: Note In order to achieve uniqueness, a collator name always has the attribute abbreviations sorted.
For a full list of supported locales in ICU, see Locale Explorer , which also contains an on-line demo showing sorting for each locale. The demo allows you to try different attribute values, to see how they affect sorting.
To see tabular results for the UCA table itself, see the Unicode Collation Charts .
For the UCA specification, see UTS #10: Unicode Collation Algorithm .
For more detail on the precise effects of these options, see Collation Customization .
Attribute | Abbreviation | Possible Values |
---|---|---|
Locale | L | <language> |
Script | Z | <script> |
Region | R | <region> |
Variant | V | <variant> |
Keyword | K | <keyword> |
Strength | S | 1, 2, 3, 4, I, D |
Case_Level | E | X, O, D |
Case_First | C | X, L, U, D |
Alternate | A | N, S, D |
Variable_Top | T | <hex digits> |
Normalization Checking | N | X, O, D |
French | F | X, O, D |
Hiragana | H | X, O, D |
The Locale attribute is typically the most important attribute for correct sorting and matching, according to the user expectations in different countries and regions. The default UCA ordering will only sort a few languages such as Dutch and Portuguese correctly (“correctly” meaning according to the normal expectations for users of the languages). Otherwise, you need to supply the locale to UCA in order to properly collate text for a given language. Thus a locale needs to be supplied so as to choose a collator that is correctly tailored for that locale. The choice of a locale will automatically preset the values for all of the attributes to something that is reasonable for that locale. Thus most of the time the other attributes do not need to be explicitly set. In some cases, the choice of locale will make a difference in string comparison performance and/or sort key length.
In short attribute names, <language>_<script>_<region>_<variant>@collation=<keyword>
is represented by: L<language>_Z<script>_R<region>_V<variant>_K<keyword>
. Not all the elements are required. Valid values for locale elements are general valid values for RFC 3066 locale naming.
Example:
Locale=“sv” (Swedish) “Kypper” < “Köpfe”
Locale=“de” (German) “Köpfe” < “Kypper”
The Strength attribute determines whether accents or case are taken into account when collating or matching text. ( (In writing systems without case or accents, it controls similarly important features). The default strength setting usually does not need to be changed for collating (sorting), but often needs to be changed when matching (e.g. SELECT). The possible values include Default (D), Primary (1), Secondary (2), Tertiary (3), Quaternary (4), and Identical (I).
For example, people may choose to ignore accents or ignore accents and case when searching for text.
Almost all characters are distinguished by the first three levels, and in most locales the default value is thus Tertiary. However, if Alternate is set to be Shifted, then the Quaternary strength (4) can be used to break ties among whitespace, punctuation, and symbols that would otherwise be ignored. If very fine distinctions among characters are required, then the Identical strength (I) can be used (for example, Identical Strength distinguishes between the Mathematical Bold Small A and the Mathematical Italic Small A. For more examples, look at the cells with white backgrounds in the collation charts). However, using levels higher than Tertiary - the Identical strength - result in significantly longer sort keys, and slower string comparison performance for equal strings.
Example:
S=1 role = Role = rôle
S=2 role = Role < rôle
S=3 role < Role < rôle
The Case_Level attribute is used when ignoring accents but not case. In such a situation, set Strength to be Primary, and Case_Level to be On. In most locales, this setting is Off by default. There is a small string comparison performance and sort key impact if this attribute is set to be On.
Example:
S=1, E=X role = Role = rôle
S=1, E=O role = rôle < Role
The Case_First attribute is used to control whether uppercase letters come before lowercase letters or vice versa, in the absence of other differences in the strings. The possible values are Uppercase_First (U) and Lowercase_First (L), plus the standard Default and Off. There is almost no difference between the Off and Lowercase_First options in terms of results, so typically users will not use Lowercase_First: only Off or Uppercase_First. (People interested in the detailed differences between X and L should consult the Collation Customization ). Specifying either L or U won't affect string comparison performance, but will affect the sort key length.
Example:
C=X or C=L “china” < “China” < “denmark” < “Denmark”
C=U “China” < “china” < “Denmark” < “denmark”
The Alternate attribute is used to control the handling of the so-called **variable **characters in the UCA: whitespace, punctuation and symbols. If Alternate is set to Non-Ignorable (N), then differences among these characters are of the same importance as differences among letters. If Alternate is set to Shifted (S), then these characters are of only minor importance. The Shifted value is often used in combination with Strength set to Quaternary. In such a case, white-space, punctuation, and symbols are considered when comparing strings, but only if all other aspects of the strings (base letters, accents, and case) are identical. If Alternate is not set to Shifted, then there is no difference between a Strength of 3 and a Strength of 4.
For more information and examples, see Variable_Weighting in the UCA.
The reason the Alternate values are not simply On and Off is that additional Alternate values may be added in the future.
The UCA option Blanked is expressed with Strength set to 3, and Alternate set to Shifted.
The default for most locales is Non-Ignorable. If Shifted is selected, it may be slower if there are many strings that are the same except for punctuation; sort key length will not be affected unless the strength level is also increased.
Example:
S=3, A=N di Silva < Di Silva < diSilva < U.S.A. < USA
S=3, A=S di Silva = diSilva < Di Silva < U.S.A. = USA
S=4, A=S di Silva < diSilva < Di Silva < U.S.A. < USA
The Variable_Top attribute is only meaningful if the Alternate attribute is not set to Non-Ignorable. In such a case, it controls which characters count as ignorable. The <hex> value specifies the “highest” character sequence (in UCA order) weight that is to be considered ignorable.
Thus, for example, if a user wanted white-space to be ignorable, but not any visible characters, then s/he would use the value Variable_Top=0020 (space). The digits should only be a single character. All characters of the same primary weight are equivalent, so Variable_Top=3000 (ideographic space) has the same effect as Variable_Top=0020.
This setting (alone) has little impact on string comparison performance; setting it lower or higher will make sort keys slightly shorter or longer respectively.
Example:
S=3, A=S di Silva = diSilva < U.S.A. = USA
S=3, A=S, T=0020 di Silva = diSilva < U.S.A. < USA
The Normalization setting determines whether text is thoroughly normalized or not in comparison. Even if the setting is off (which is the default for many locales), text as represented in common usage will compare correctly (for details, see UTN #5). Only if the accent marks are in non-canonical order will there be a problem. If the setting is On, then the best results are guaranteed for all possible text input.There is a medium string comparison performance cost if this attribute is On, depending on the frequency of sequences that require normalization. There is no significant effect on sort key length.If the input text is known to be in NFD or NFKD normalization forms, there is no need to enable this Normalization option.
Example:
N=X ä = a + ◌̈ < ä + ◌̣ < ạ + ◌̈
N=O ä = a + ◌̈ < ä + ◌̣ = ạ + ◌̈
Some French dictionary ordering traditions sort strings with different accents from the back of the string. This attribute is automatically set to On for the Canadian French locale (fr_CA). Users normally would not need to explicitly set this attribute. There is a string comparison performance cost when it is set On, but sort key length is unaffected.
Example:
F=X cote < coté < côte < côté
F=O cote < côte < coté < côté
Compatibility with JIS x 4061 requires the introduction of an additional level to distinguish Hiragana and Katakana characters. If compatibility with that standard is required, then this attribute is set On, and the strength should be set to at least Quaternary.
This attribute is an implementation detail of the CLDR Japanese tailoring. The implementation might change to use a different mechanism to achieve the same Japanese sort order. Since ICU 50, this attribute is not settable any more.
Example:
H=X, S=4 きゅう = キュウ < きゆう = キユウ
H=O, S=4 きゅう < キュウ < きゆう < キユウ
:point_right: Note If attributes in collator name are not overridden, it is assumed that they are the same as for the given locale. For example, a collator opened with an empty string has the same attribute settings as AN_CX_EX_FX_HX_KX_NX_S3_T0000.*
Value | Abbreviation |
---|---|
Default | D |
On | O |
Off | X |
Primary | 1 |
Secondary | 2 |
Tertiary | 3 |
Quaternary | 4 |
Identical | I |
Shifted | S |
Non-Ignorable | N |
Lower-First | L |
Upper-First | U |