blob: 01723b35c97d7cb647879e8fab5ba56b84b422eb [file] [log] [blame]
// dear imgui, v1.91.5 WIP
// (drawing and font code)
/*
Index of this file:
// [SECTION] STB libraries implementation
// [SECTION] Style functions
// [SECTION] ImDrawList
// [SECTION] ImTriangulator, ImDrawList concave polygon fill
// [SECTION] ImDrawListSplitter
// [SECTION] ImDrawData
// [SECTION] Helpers ShadeVertsXXX functions
// [SECTION] ImFontConfig
// [SECTION] ImFontAtlas
// [SECTION] ImFontAtlas glyph ranges helpers
// [SECTION] ImFontGlyphRangesBuilder
// [SECTION] ImFont
// [SECTION] ImGui Internal Render Helpers
// [SECTION] Decompression code
// [SECTION] Default font data (ProggyClean.ttf)
*/
#if defined(_MSC_VER) && !defined(_CRT_SECURE_NO_WARNINGS)
#define _CRT_SECURE_NO_WARNINGS
#endif
#ifndef IMGUI_DEFINE_MATH_OPERATORS
#define IMGUI_DEFINE_MATH_OPERATORS
#endif
#include "imgui.h"
#ifndef IMGUI_DISABLE
#include "imgui_internal.h"
#ifdef IMGUI_ENABLE_FREETYPE
#include "misc/freetype/imgui_freetype.h"
#endif
#include <stdio.h> // vsnprintf, sscanf, printf
// Visual Studio warnings
#ifdef _MSC_VER
#pragma warning (disable: 4127) // condition expression is constant
#pragma warning (disable: 4505) // unreferenced local function has been removed (stb stuff)
#pragma warning (disable: 4996) // 'This function or variable may be unsafe': strcpy, strdup, sprintf, vsnprintf, sscanf, fopen
#pragma warning (disable: 26451) // [Static Analyzer] Arithmetic overflow : Using operator 'xxx' on a 4 byte value and then casting the result to a 8 byte value. Cast the value to the wider type before calling operator 'xxx' to avoid overflow(io.2).
#pragma warning (disable: 26812) // [Static Analyzer] The enum type 'xxx' is unscoped. Prefer 'enum class' over 'enum' (Enum.3). [MSVC Static Analyzer)
#endif
// Clang/GCC warnings with -Weverything
#if defined(__clang__)
#if __has_warning("-Wunknown-warning-option")
#pragma clang diagnostic ignored "-Wunknown-warning-option" // warning: unknown warning group 'xxx' // not all warnings are known by all Clang versions and they tend to be rename-happy.. so ignoring warnings triggers new warnings on some configuration. Great!
#endif
#pragma clang diagnostic ignored "-Wunknown-pragmas" // warning: unknown warning group 'xxx'
#pragma clang diagnostic ignored "-Wold-style-cast" // warning: use of old-style cast // yes, they are more terse.
#pragma clang diagnostic ignored "-Wfloat-equal" // warning: comparing floating point with == or != is unsafe // storing and comparing against same constants ok.
#pragma clang diagnostic ignored "-Wglobal-constructors" // warning: declaration requires a global destructor // similar to above, not sure what the exact difference is.
#pragma clang diagnostic ignored "-Wsign-conversion" // warning: implicit conversion changes signedness
#pragma clang diagnostic ignored "-Wzero-as-null-pointer-constant" // warning: zero as null pointer constant // some standard header variations use #define NULL 0
#pragma clang diagnostic ignored "-Wcomma" // warning: possible misuse of comma operator here
#pragma clang diagnostic ignored "-Wreserved-id-macro" // warning: macro name is a reserved identifier
#pragma clang diagnostic ignored "-Wdouble-promotion" // warning: implicit conversion from 'float' to 'double' when passing argument to function // using printf() is a misery with this as C++ va_arg ellipsis changes float to double.
#pragma clang diagnostic ignored "-Wimplicit-int-float-conversion" // warning: implicit conversion from 'xxx' to 'float' may lose precision
#pragma clang diagnostic ignored "-Wreserved-identifier" // warning: identifier '_Xxx' is reserved because it starts with '_' followed by a capital letter
#pragma clang diagnostic ignored "-Wunsafe-buffer-usage" // warning: 'xxx' is an unsafe pointer used for buffer access
#elif defined(__GNUC__)
#pragma GCC diagnostic ignored "-Wpragmas" // warning: unknown option after '#pragma GCC diagnostic' kind
#pragma GCC diagnostic ignored "-Wunused-function" // warning: 'xxxx' defined but not used
#pragma GCC diagnostic ignored "-Wdouble-promotion" // warning: implicit conversion from 'float' to 'double' when passing argument to function
#pragma GCC diagnostic ignored "-Wconversion" // warning: conversion to 'xxxx' from 'xxxx' may alter its value
#pragma GCC diagnostic ignored "-Wstack-protector" // warning: stack protector not protecting local variables: variable length buffer
#pragma GCC diagnostic ignored "-Wclass-memaccess" // [__GNUC__ >= 8] warning: 'memset/memcpy' clearing/writing an object of type 'xxxx' with no trivial copy-assignment; use assignment or value-initialization instead
#endif
//-------------------------------------------------------------------------
// [SECTION] STB libraries implementation (for stb_truetype and stb_rect_pack)
//-------------------------------------------------------------------------
// Compile time options:
//#define IMGUI_STB_NAMESPACE ImStb
//#define IMGUI_STB_TRUETYPE_FILENAME "my_folder/stb_truetype.h"
//#define IMGUI_STB_RECT_PACK_FILENAME "my_folder/stb_rect_pack.h"
//#define IMGUI_DISABLE_STB_TRUETYPE_IMPLEMENTATION
//#define IMGUI_DISABLE_STB_RECT_PACK_IMPLEMENTATION
#ifdef IMGUI_STB_NAMESPACE
namespace IMGUI_STB_NAMESPACE
{
#endif
#ifdef _MSC_VER
#pragma warning (push)
#pragma warning (disable: 4456) // declaration of 'xx' hides previous local declaration
#pragma warning (disable: 6011) // (stb_rectpack) Dereferencing NULL pointer 'cur->next'.
#pragma warning (disable: 6385) // (stb_truetype) Reading invalid data from 'buffer': the readable size is '_Old_3`kernel_width' bytes, but '3' bytes may be read.
#pragma warning (disable: 28182) // (stb_rectpack) Dereferencing NULL pointer. 'cur' contains the same NULL value as 'cur->next' did.
#endif
#if defined(__clang__)
#pragma clang diagnostic push
#pragma clang diagnostic ignored "-Wunused-function"
#pragma clang diagnostic ignored "-Wmissing-prototypes"
#pragma clang diagnostic ignored "-Wimplicit-fallthrough"
#pragma clang diagnostic ignored "-Wcast-qual" // warning: cast from 'const xxxx *' to 'xxx *' drops const qualifier
#endif
#if defined(__GNUC__)
#pragma GCC diagnostic push
#pragma GCC diagnostic ignored "-Wtype-limits" // warning: comparison is always true due to limited range of data type [-Wtype-limits]
#pragma GCC diagnostic ignored "-Wcast-qual" // warning: cast from type 'const xxxx *' to type 'xxxx *' casts away qualifiers
#endif
#ifndef STB_RECT_PACK_IMPLEMENTATION // in case the user already have an implementation in the _same_ compilation unit (e.g. unity builds)
#ifndef IMGUI_DISABLE_STB_RECT_PACK_IMPLEMENTATION // in case the user already have an implementation in another compilation unit
#define STBRP_STATIC
#define STBRP_ASSERT(x) do { IM_ASSERT(x); } while (0)
#define STBRP_SORT ImQsort
#define STB_RECT_PACK_IMPLEMENTATION
#endif
#ifdef IMGUI_STB_RECT_PACK_FILENAME
#include IMGUI_STB_RECT_PACK_FILENAME
#else
#include "imstb_rectpack.h"
#endif
#endif
#ifdef IMGUI_ENABLE_STB_TRUETYPE
#ifndef STB_TRUETYPE_IMPLEMENTATION // in case the user already have an implementation in the _same_ compilation unit (e.g. unity builds)
#ifndef IMGUI_DISABLE_STB_TRUETYPE_IMPLEMENTATION // in case the user already have an implementation in another compilation unit
#define STBTT_malloc(x,u) ((void)(u), IM_ALLOC(x))
#define STBTT_free(x,u) ((void)(u), IM_FREE(x))
#define STBTT_assert(x) do { IM_ASSERT(x); } while(0)
#define STBTT_fmod(x,y) ImFmod(x,y)
#define STBTT_sqrt(x) ImSqrt(x)
#define STBTT_pow(x,y) ImPow(x,y)
#define STBTT_fabs(x) ImFabs(x)
#define STBTT_ifloor(x) ((int)ImFloor(x))
#define STBTT_iceil(x) ((int)ImCeil(x))
#define STBTT_STATIC
#define STB_TRUETYPE_IMPLEMENTATION
#else
#define STBTT_DEF extern
#endif
#ifdef IMGUI_STB_TRUETYPE_FILENAME
#include IMGUI_STB_TRUETYPE_FILENAME
#else
#include "imstb_truetype.h"
#endif
#endif
#endif // IMGUI_ENABLE_STB_TRUETYPE
#if defined(__GNUC__)
#pragma GCC diagnostic pop
#endif
#if defined(__clang__)
#pragma clang diagnostic pop
#endif
#if defined(_MSC_VER)
#pragma warning (pop)
#endif
#ifdef IMGUI_STB_NAMESPACE
} // namespace ImStb
using namespace IMGUI_STB_NAMESPACE;
#endif
//-----------------------------------------------------------------------------
// [SECTION] Style functions
//-----------------------------------------------------------------------------
void ImGui::StyleColorsDark(ImGuiStyle* dst)
{
ImGuiStyle* style = dst ? dst : &ImGui::GetStyle();
ImVec4* colors = style->Colors;
colors[ImGuiCol_Text] = ImVec4(1.00f, 1.00f, 1.00f, 1.00f);
colors[ImGuiCol_TextDisabled] = ImVec4(0.50f, 0.50f, 0.50f, 1.00f);
colors[ImGuiCol_WindowBg] = ImVec4(0.06f, 0.06f, 0.06f, 0.94f);
colors[ImGuiCol_ChildBg] = ImVec4(0.00f, 0.00f, 0.00f, 0.00f);
colors[ImGuiCol_PopupBg] = ImVec4(0.08f, 0.08f, 0.08f, 0.94f);
colors[ImGuiCol_Border] = ImVec4(0.43f, 0.43f, 0.50f, 0.50f);
colors[ImGuiCol_BorderShadow] = ImVec4(0.00f, 0.00f, 0.00f, 0.00f);
colors[ImGuiCol_FrameBg] = ImVec4(0.16f, 0.29f, 0.48f, 0.54f);
colors[ImGuiCol_FrameBgHovered] = ImVec4(0.26f, 0.59f, 0.98f, 0.40f);
colors[ImGuiCol_FrameBgActive] = ImVec4(0.26f, 0.59f, 0.98f, 0.67f);
colors[ImGuiCol_TitleBg] = ImVec4(0.04f, 0.04f, 0.04f, 1.00f);
colors[ImGuiCol_TitleBgActive] = ImVec4(0.16f, 0.29f, 0.48f, 1.00f);
colors[ImGuiCol_TitleBgCollapsed] = ImVec4(0.00f, 0.00f, 0.00f, 0.51f);
colors[ImGuiCol_MenuBarBg] = ImVec4(0.14f, 0.14f, 0.14f, 1.00f);
colors[ImGuiCol_ScrollbarBg] = ImVec4(0.02f, 0.02f, 0.02f, 0.53f);
colors[ImGuiCol_ScrollbarGrab] = ImVec4(0.31f, 0.31f, 0.31f, 1.00f);
colors[ImGuiCol_ScrollbarGrabHovered] = ImVec4(0.41f, 0.41f, 0.41f, 1.00f);
colors[ImGuiCol_ScrollbarGrabActive] = ImVec4(0.51f, 0.51f, 0.51f, 1.00f);
colors[ImGuiCol_CheckMark] = ImVec4(0.26f, 0.59f, 0.98f, 1.00f);
colors[ImGuiCol_SliderGrab] = ImVec4(0.24f, 0.52f, 0.88f, 1.00f);
colors[ImGuiCol_SliderGrabActive] = ImVec4(0.26f, 0.59f, 0.98f, 1.00f);
colors[ImGuiCol_Button] = ImVec4(0.26f, 0.59f, 0.98f, 0.40f);
colors[ImGuiCol_ButtonHovered] = ImVec4(0.26f, 0.59f, 0.98f, 1.00f);
colors[ImGuiCol_ButtonActive] = ImVec4(0.06f, 0.53f, 0.98f, 1.00f);
colors[ImGuiCol_Header] = ImVec4(0.26f, 0.59f, 0.98f, 0.31f);
colors[ImGuiCol_HeaderHovered] = ImVec4(0.26f, 0.59f, 0.98f, 0.80f);
colors[ImGuiCol_HeaderActive] = ImVec4(0.26f, 0.59f, 0.98f, 1.00f);
colors[ImGuiCol_Separator] = colors[ImGuiCol_Border];
colors[ImGuiCol_SeparatorHovered] = ImVec4(0.10f, 0.40f, 0.75f, 0.78f);
colors[ImGuiCol_SeparatorActive] = ImVec4(0.10f, 0.40f, 0.75f, 1.00f);
colors[ImGuiCol_ResizeGrip] = ImVec4(0.26f, 0.59f, 0.98f, 0.20f);
colors[ImGuiCol_ResizeGripHovered] = ImVec4(0.26f, 0.59f, 0.98f, 0.67f);
colors[ImGuiCol_ResizeGripActive] = ImVec4(0.26f, 0.59f, 0.98f, 0.95f);
colors[ImGuiCol_TabHovered] = colors[ImGuiCol_HeaderHovered];
colors[ImGuiCol_Tab] = ImLerp(colors[ImGuiCol_Header], colors[ImGuiCol_TitleBgActive], 0.80f);
colors[ImGuiCol_TabSelected] = ImLerp(colors[ImGuiCol_HeaderActive], colors[ImGuiCol_TitleBgActive], 0.60f);
colors[ImGuiCol_TabSelectedOverline] = colors[ImGuiCol_HeaderActive];
colors[ImGuiCol_TabDimmed] = ImLerp(colors[ImGuiCol_Tab], colors[ImGuiCol_TitleBg], 0.80f);
colors[ImGuiCol_TabDimmedSelected] = ImLerp(colors[ImGuiCol_TabSelected], colors[ImGuiCol_TitleBg], 0.40f);
colors[ImGuiCol_TabDimmedSelectedOverline] = ImVec4(0.50f, 0.50f, 0.50f, 1.00f);
colors[ImGuiCol_PlotLines] = ImVec4(0.61f, 0.61f, 0.61f, 1.00f);
colors[ImGuiCol_PlotLinesHovered] = ImVec4(1.00f, 0.43f, 0.35f, 1.00f);
colors[ImGuiCol_PlotHistogram] = ImVec4(0.90f, 0.70f, 0.00f, 1.00f);
colors[ImGuiCol_PlotHistogramHovered] = ImVec4(1.00f, 0.60f, 0.00f, 1.00f);
colors[ImGuiCol_TableHeaderBg] = ImVec4(0.19f, 0.19f, 0.20f, 1.00f);
colors[ImGuiCol_TableBorderStrong] = ImVec4(0.31f, 0.31f, 0.35f, 1.00f); // Prefer using Alpha=1.0 here
colors[ImGuiCol_TableBorderLight] = ImVec4(0.23f, 0.23f, 0.25f, 1.00f); // Prefer using Alpha=1.0 here
colors[ImGuiCol_TableRowBg] = ImVec4(0.00f, 0.00f, 0.00f, 0.00f);
colors[ImGuiCol_TableRowBgAlt] = ImVec4(1.00f, 1.00f, 1.00f, 0.06f);
colors[ImGuiCol_TextLink] = colors[ImGuiCol_HeaderActive];
colors[ImGuiCol_TextSelectedBg] = ImVec4(0.26f, 0.59f, 0.98f, 0.35f);
colors[ImGuiCol_DragDropTarget] = ImVec4(1.00f, 1.00f, 0.00f, 0.90f);
colors[ImGuiCol_NavCursor] = ImVec4(0.26f, 0.59f, 0.98f, 1.00f);
colors[ImGuiCol_NavWindowingHighlight] = ImVec4(1.00f, 1.00f, 1.00f, 0.70f);
colors[ImGuiCol_NavWindowingDimBg] = ImVec4(0.80f, 0.80f, 0.80f, 0.20f);
colors[ImGuiCol_ModalWindowDimBg] = ImVec4(0.80f, 0.80f, 0.80f, 0.35f);
}
void ImGui::StyleColorsClassic(ImGuiStyle* dst)
{
ImGuiStyle* style = dst ? dst : &ImGui::GetStyle();
ImVec4* colors = style->Colors;
colors[ImGuiCol_Text] = ImVec4(0.90f, 0.90f, 0.90f, 1.00f);
colors[ImGuiCol_TextDisabled] = ImVec4(0.60f, 0.60f, 0.60f, 1.00f);
colors[ImGuiCol_WindowBg] = ImVec4(0.00f, 0.00f, 0.00f, 0.85f);
colors[ImGuiCol_ChildBg] = ImVec4(0.00f, 0.00f, 0.00f, 0.00f);
colors[ImGuiCol_PopupBg] = ImVec4(0.11f, 0.11f, 0.14f, 0.92f);
colors[ImGuiCol_Border] = ImVec4(0.50f, 0.50f, 0.50f, 0.50f);
colors[ImGuiCol_BorderShadow] = ImVec4(0.00f, 0.00f, 0.00f, 0.00f);
colors[ImGuiCol_FrameBg] = ImVec4(0.43f, 0.43f, 0.43f, 0.39f);
colors[ImGuiCol_FrameBgHovered] = ImVec4(0.47f, 0.47f, 0.69f, 0.40f);
colors[ImGuiCol_FrameBgActive] = ImVec4(0.42f, 0.41f, 0.64f, 0.69f);
colors[ImGuiCol_TitleBg] = ImVec4(0.27f, 0.27f, 0.54f, 0.83f);
colors[ImGuiCol_TitleBgActive] = ImVec4(0.32f, 0.32f, 0.63f, 0.87f);
colors[ImGuiCol_TitleBgCollapsed] = ImVec4(0.40f, 0.40f, 0.80f, 0.20f);
colors[ImGuiCol_MenuBarBg] = ImVec4(0.40f, 0.40f, 0.55f, 0.80f);
colors[ImGuiCol_ScrollbarBg] = ImVec4(0.20f, 0.25f, 0.30f, 0.60f);
colors[ImGuiCol_ScrollbarGrab] = ImVec4(0.40f, 0.40f, 0.80f, 0.30f);
colors[ImGuiCol_ScrollbarGrabHovered] = ImVec4(0.40f, 0.40f, 0.80f, 0.40f);
colors[ImGuiCol_ScrollbarGrabActive] = ImVec4(0.41f, 0.39f, 0.80f, 0.60f);
colors[ImGuiCol_CheckMark] = ImVec4(0.90f, 0.90f, 0.90f, 0.50f);
colors[ImGuiCol_SliderGrab] = ImVec4(1.00f, 1.00f, 1.00f, 0.30f);
colors[ImGuiCol_SliderGrabActive] = ImVec4(0.41f, 0.39f, 0.80f, 0.60f);
colors[ImGuiCol_Button] = ImVec4(0.35f, 0.40f, 0.61f, 0.62f);
colors[ImGuiCol_ButtonHovered] = ImVec4(0.40f, 0.48f, 0.71f, 0.79f);
colors[ImGuiCol_ButtonActive] = ImVec4(0.46f, 0.54f, 0.80f, 1.00f);
colors[ImGuiCol_Header] = ImVec4(0.40f, 0.40f, 0.90f, 0.45f);
colors[ImGuiCol_HeaderHovered] = ImVec4(0.45f, 0.45f, 0.90f, 0.80f);
colors[ImGuiCol_HeaderActive] = ImVec4(0.53f, 0.53f, 0.87f, 0.80f);
colors[ImGuiCol_Separator] = ImVec4(0.50f, 0.50f, 0.50f, 0.60f);
colors[ImGuiCol_SeparatorHovered] = ImVec4(0.60f, 0.60f, 0.70f, 1.00f);
colors[ImGuiCol_SeparatorActive] = ImVec4(0.70f, 0.70f, 0.90f, 1.00f);
colors[ImGuiCol_ResizeGrip] = ImVec4(1.00f, 1.00f, 1.00f, 0.10f);
colors[ImGuiCol_ResizeGripHovered] = ImVec4(0.78f, 0.82f, 1.00f, 0.60f);
colors[ImGuiCol_ResizeGripActive] = ImVec4(0.78f, 0.82f, 1.00f, 0.90f);
colors[ImGuiCol_TabHovered] = colors[ImGuiCol_HeaderHovered];
colors[ImGuiCol_Tab] = ImLerp(colors[ImGuiCol_Header], colors[ImGuiCol_TitleBgActive], 0.80f);
colors[ImGuiCol_TabSelected] = ImLerp(colors[ImGuiCol_HeaderActive], colors[ImGuiCol_TitleBgActive], 0.60f);
colors[ImGuiCol_TabSelectedOverline] = colors[ImGuiCol_HeaderActive];
colors[ImGuiCol_TabDimmed] = ImLerp(colors[ImGuiCol_Tab], colors[ImGuiCol_TitleBg], 0.80f);
colors[ImGuiCol_TabDimmedSelected] = ImLerp(colors[ImGuiCol_TabSelected], colors[ImGuiCol_TitleBg], 0.40f);
colors[ImGuiCol_TabDimmedSelectedOverline] = colors[ImGuiCol_HeaderActive];
colors[ImGuiCol_PlotLines] = ImVec4(1.00f, 1.00f, 1.00f, 1.00f);
colors[ImGuiCol_PlotLinesHovered] = ImVec4(0.90f, 0.70f, 0.00f, 1.00f);
colors[ImGuiCol_PlotHistogram] = ImVec4(0.90f, 0.70f, 0.00f, 1.00f);
colors[ImGuiCol_PlotHistogramHovered] = ImVec4(1.00f, 0.60f, 0.00f, 1.00f);
colors[ImGuiCol_TableHeaderBg] = ImVec4(0.27f, 0.27f, 0.38f, 1.00f);
colors[ImGuiCol_TableBorderStrong] = ImVec4(0.31f, 0.31f, 0.45f, 1.00f); // Prefer using Alpha=1.0 here
colors[ImGuiCol_TableBorderLight] = ImVec4(0.26f, 0.26f, 0.28f, 1.00f); // Prefer using Alpha=1.0 here
colors[ImGuiCol_TableRowBg] = ImVec4(0.00f, 0.00f, 0.00f, 0.00f);
colors[ImGuiCol_TableRowBgAlt] = ImVec4(1.00f, 1.00f, 1.00f, 0.07f);
colors[ImGuiCol_TextLink] = colors[ImGuiCol_HeaderActive];
colors[ImGuiCol_TextSelectedBg] = ImVec4(0.00f, 0.00f, 1.00f, 0.35f);
colors[ImGuiCol_DragDropTarget] = ImVec4(1.00f, 1.00f, 0.00f, 0.90f);
colors[ImGuiCol_NavCursor] = colors[ImGuiCol_HeaderHovered];
colors[ImGuiCol_NavWindowingHighlight] = ImVec4(1.00f, 1.00f, 1.00f, 0.70f);
colors[ImGuiCol_NavWindowingDimBg] = ImVec4(0.80f, 0.80f, 0.80f, 0.20f);
colors[ImGuiCol_ModalWindowDimBg] = ImVec4(0.20f, 0.20f, 0.20f, 0.35f);
}
// Those light colors are better suited with a thicker font than the default one + FrameBorder
void ImGui::StyleColorsLight(ImGuiStyle* dst)
{
ImGuiStyle* style = dst ? dst : &ImGui::GetStyle();
ImVec4* colors = style->Colors;
colors[ImGuiCol_Text] = ImVec4(0.00f, 0.00f, 0.00f, 1.00f);
colors[ImGuiCol_TextDisabled] = ImVec4(0.60f, 0.60f, 0.60f, 1.00f);
colors[ImGuiCol_WindowBg] = ImVec4(0.94f, 0.94f, 0.94f, 1.00f);
colors[ImGuiCol_ChildBg] = ImVec4(0.00f, 0.00f, 0.00f, 0.00f);
colors[ImGuiCol_PopupBg] = ImVec4(1.00f, 1.00f, 1.00f, 0.98f);
colors[ImGuiCol_Border] = ImVec4(0.00f, 0.00f, 0.00f, 0.30f);
colors[ImGuiCol_BorderShadow] = ImVec4(0.00f, 0.00f, 0.00f, 0.00f);
colors[ImGuiCol_FrameBg] = ImVec4(1.00f, 1.00f, 1.00f, 1.00f);
colors[ImGuiCol_FrameBgHovered] = ImVec4(0.26f, 0.59f, 0.98f, 0.40f);
colors[ImGuiCol_FrameBgActive] = ImVec4(0.26f, 0.59f, 0.98f, 0.67f);
colors[ImGuiCol_TitleBg] = ImVec4(0.96f, 0.96f, 0.96f, 1.00f);
colors[ImGuiCol_TitleBgActive] = ImVec4(0.82f, 0.82f, 0.82f, 1.00f);
colors[ImGuiCol_TitleBgCollapsed] = ImVec4(1.00f, 1.00f, 1.00f, 0.51f);
colors[ImGuiCol_MenuBarBg] = ImVec4(0.86f, 0.86f, 0.86f, 1.00f);
colors[ImGuiCol_ScrollbarBg] = ImVec4(0.98f, 0.98f, 0.98f, 0.53f);
colors[ImGuiCol_ScrollbarGrab] = ImVec4(0.69f, 0.69f, 0.69f, 0.80f);
colors[ImGuiCol_ScrollbarGrabHovered] = ImVec4(0.49f, 0.49f, 0.49f, 0.80f);
colors[ImGuiCol_ScrollbarGrabActive] = ImVec4(0.49f, 0.49f, 0.49f, 1.00f);
colors[ImGuiCol_CheckMark] = ImVec4(0.26f, 0.59f, 0.98f, 1.00f);
colors[ImGuiCol_SliderGrab] = ImVec4(0.26f, 0.59f, 0.98f, 0.78f);
colors[ImGuiCol_SliderGrabActive] = ImVec4(0.46f, 0.54f, 0.80f, 0.60f);
colors[ImGuiCol_Button] = ImVec4(0.26f, 0.59f, 0.98f, 0.40f);
colors[ImGuiCol_ButtonHovered] = ImVec4(0.26f, 0.59f, 0.98f, 1.00f);
colors[ImGuiCol_ButtonActive] = ImVec4(0.06f, 0.53f, 0.98f, 1.00f);
colors[ImGuiCol_Header] = ImVec4(0.26f, 0.59f, 0.98f, 0.31f);
colors[ImGuiCol_HeaderHovered] = ImVec4(0.26f, 0.59f, 0.98f, 0.80f);
colors[ImGuiCol_HeaderActive] = ImVec4(0.26f, 0.59f, 0.98f, 1.00f);
colors[ImGuiCol_Separator] = ImVec4(0.39f, 0.39f, 0.39f, 0.62f);
colors[ImGuiCol_SeparatorHovered] = ImVec4(0.14f, 0.44f, 0.80f, 0.78f);
colors[ImGuiCol_SeparatorActive] = ImVec4(0.14f, 0.44f, 0.80f, 1.00f);
colors[ImGuiCol_ResizeGrip] = ImVec4(0.35f, 0.35f, 0.35f, 0.17f);
colors[ImGuiCol_ResizeGripHovered] = ImVec4(0.26f, 0.59f, 0.98f, 0.67f);
colors[ImGuiCol_ResizeGripActive] = ImVec4(0.26f, 0.59f, 0.98f, 0.95f);
colors[ImGuiCol_TabHovered] = colors[ImGuiCol_HeaderHovered];
colors[ImGuiCol_Tab] = ImLerp(colors[ImGuiCol_Header], colors[ImGuiCol_TitleBgActive], 0.90f);
colors[ImGuiCol_TabSelected] = ImLerp(colors[ImGuiCol_HeaderActive], colors[ImGuiCol_TitleBgActive], 0.60f);
colors[ImGuiCol_TabSelectedOverline] = colors[ImGuiCol_HeaderActive];
colors[ImGuiCol_TabDimmed] = ImLerp(colors[ImGuiCol_Tab], colors[ImGuiCol_TitleBg], 0.80f);
colors[ImGuiCol_TabDimmedSelected] = ImLerp(colors[ImGuiCol_TabSelected], colors[ImGuiCol_TitleBg], 0.40f);
colors[ImGuiCol_TabDimmedSelectedOverline] = ImVec4(0.26f, 0.59f, 1.00f, 1.00f);
colors[ImGuiCol_PlotLines] = ImVec4(0.39f, 0.39f, 0.39f, 1.00f);
colors[ImGuiCol_PlotLinesHovered] = ImVec4(1.00f, 0.43f, 0.35f, 1.00f);
colors[ImGuiCol_PlotHistogram] = ImVec4(0.90f, 0.70f, 0.00f, 1.00f);
colors[ImGuiCol_PlotHistogramHovered] = ImVec4(1.00f, 0.45f, 0.00f, 1.00f);
colors[ImGuiCol_TableHeaderBg] = ImVec4(0.78f, 0.87f, 0.98f, 1.00f);
colors[ImGuiCol_TableBorderStrong] = ImVec4(0.57f, 0.57f, 0.64f, 1.00f); // Prefer using Alpha=1.0 here
colors[ImGuiCol_TableBorderLight] = ImVec4(0.68f, 0.68f, 0.74f, 1.00f); // Prefer using Alpha=1.0 here
colors[ImGuiCol_TableRowBg] = ImVec4(0.00f, 0.00f, 0.00f, 0.00f);
colors[ImGuiCol_TableRowBgAlt] = ImVec4(0.30f, 0.30f, 0.30f, 0.09f);
colors[ImGuiCol_TextLink] = colors[ImGuiCol_HeaderActive];
colors[ImGuiCol_TextSelectedBg] = ImVec4(0.26f, 0.59f, 0.98f, 0.35f);
colors[ImGuiCol_DragDropTarget] = ImVec4(0.26f, 0.59f, 0.98f, 0.95f);
colors[ImGuiCol_NavCursor] = colors[ImGuiCol_HeaderHovered];
colors[ImGuiCol_NavWindowingHighlight] = ImVec4(0.70f, 0.70f, 0.70f, 0.70f);
colors[ImGuiCol_NavWindowingDimBg] = ImVec4(0.20f, 0.20f, 0.20f, 0.20f);
colors[ImGuiCol_ModalWindowDimBg] = ImVec4(0.20f, 0.20f, 0.20f, 0.35f);
}
//-----------------------------------------------------------------------------
// [SECTION] ImDrawList
//-----------------------------------------------------------------------------
ImDrawListSharedData::ImDrawListSharedData()
{
memset(this, 0, sizeof(*this));
for (int i = 0; i < IM_ARRAYSIZE(ArcFastVtx); i++)
{
const float a = ((float)i * 2 * IM_PI) / (float)IM_ARRAYSIZE(ArcFastVtx);
ArcFastVtx[i] = ImVec2(ImCos(a), ImSin(a));
}
ArcFastRadiusCutoff = IM_DRAWLIST_CIRCLE_AUTO_SEGMENT_CALC_R(IM_DRAWLIST_ARCFAST_SAMPLE_MAX, CircleSegmentMaxError);
}
void ImDrawListSharedData::SetCircleTessellationMaxError(float max_error)
{
if (CircleSegmentMaxError == max_error)
return;
IM_ASSERT(max_error > 0.0f);
CircleSegmentMaxError = max_error;
for (int i = 0; i < IM_ARRAYSIZE(CircleSegmentCounts); i++)
{
const float radius = (float)i;
CircleSegmentCounts[i] = (ImU8)((i > 0) ? IM_DRAWLIST_CIRCLE_AUTO_SEGMENT_CALC(radius, CircleSegmentMaxError) : IM_DRAWLIST_ARCFAST_SAMPLE_MAX);
}
ArcFastRadiusCutoff = IM_DRAWLIST_CIRCLE_AUTO_SEGMENT_CALC_R(IM_DRAWLIST_ARCFAST_SAMPLE_MAX, CircleSegmentMaxError);
}
// Initialize before use in a new frame. We always have a command ready in the buffer.
// In the majority of cases, you would want to call PushClipRect() and PushTextureID() after this.
void ImDrawList::_ResetForNewFrame()
{
// Verify that the ImDrawCmd fields we want to memcmp() are contiguous in memory.
IM_STATIC_ASSERT(offsetof(ImDrawCmd, ClipRect) == 0);
IM_STATIC_ASSERT(offsetof(ImDrawCmd, TextureId) == sizeof(ImVec4));
IM_STATIC_ASSERT(offsetof(ImDrawCmd, VtxOffset) == sizeof(ImVec4) + sizeof(ImTextureID));
if (_Splitter._Count > 1)
_Splitter.Merge(this);
CmdBuffer.resize(0);
IdxBuffer.resize(0);
VtxBuffer.resize(0);
Flags = _Data->InitialFlags;
memset(&_CmdHeader, 0, sizeof(_CmdHeader));
_VtxCurrentIdx = 0;
_VtxWritePtr = NULL;
_IdxWritePtr = NULL;
_ClipRectStack.resize(0);
_TextureIdStack.resize(0);
_CallbacksDataBuf.resize(0);
_Path.resize(0);
_Splitter.Clear();
CmdBuffer.push_back(ImDrawCmd());
_FringeScale = 1.0f;
}
void ImDrawList::_ClearFreeMemory()
{
CmdBuffer.clear();
IdxBuffer.clear();
VtxBuffer.clear();
Flags = ImDrawListFlags_None;
_VtxCurrentIdx = 0;
_VtxWritePtr = NULL;
_IdxWritePtr = NULL;
_ClipRectStack.clear();
_TextureIdStack.clear();
_CallbacksDataBuf.clear();
_Path.clear();
_Splitter.ClearFreeMemory();
}
ImDrawList* ImDrawList::CloneOutput() const
{
ImDrawList* dst = IM_NEW(ImDrawList(_Data));
dst->CmdBuffer = CmdBuffer;
dst->IdxBuffer = IdxBuffer;
dst->VtxBuffer = VtxBuffer;
dst->Flags = Flags;
return dst;
}
void ImDrawList::AddDrawCmd()
{
ImDrawCmd draw_cmd;
draw_cmd.ClipRect = _CmdHeader.ClipRect; // Same as calling ImDrawCmd_HeaderCopy()
draw_cmd.TextureId = _CmdHeader.TextureId;
draw_cmd.VtxOffset = _CmdHeader.VtxOffset;
draw_cmd.IdxOffset = IdxBuffer.Size;
IM_ASSERT(draw_cmd.ClipRect.x <= draw_cmd.ClipRect.z && draw_cmd.ClipRect.y <= draw_cmd.ClipRect.w);
CmdBuffer.push_back(draw_cmd);
}
// Pop trailing draw command (used before merging or presenting to user)
// Note that this leaves the ImDrawList in a state unfit for further commands, as most code assume that CmdBuffer.Size > 0 && CmdBuffer.back().UserCallback == NULL
void ImDrawList::_PopUnusedDrawCmd()
{
while (CmdBuffer.Size > 0)
{
ImDrawCmd* curr_cmd = &CmdBuffer.Data[CmdBuffer.Size - 1];
if (curr_cmd->ElemCount != 0 || curr_cmd->UserCallback != NULL)
return;// break;
CmdBuffer.pop_back();
}
}
void ImDrawList::AddCallback(ImDrawCallback callback, void* userdata, size_t userdata_size)
{
IM_ASSERT_PARANOID(CmdBuffer.Size > 0);
ImDrawCmd* curr_cmd = &CmdBuffer.Data[CmdBuffer.Size - 1];
IM_ASSERT(curr_cmd->UserCallback == NULL);
if (curr_cmd->ElemCount != 0)
{
AddDrawCmd();
curr_cmd = &CmdBuffer.Data[CmdBuffer.Size - 1];
}
curr_cmd->UserCallback = callback;
if (userdata_size == 0)
{
// Store user data directly in command (no indirection)
curr_cmd->UserCallbackData = userdata;
curr_cmd->UserCallbackDataSize = 0;
curr_cmd->UserCallbackDataOffset = -1;
}
else
{
// Copy and store user data in a buffer
IM_ASSERT(userdata != NULL);
IM_ASSERT(userdata_size < (1u << 31));
curr_cmd->UserCallbackData = NULL; // Will be resolved during Render()
curr_cmd->UserCallbackDataSize = (int)userdata_size;
curr_cmd->UserCallbackDataOffset = _CallbacksDataBuf.Size;
_CallbacksDataBuf.resize(_CallbacksDataBuf.Size + (int)userdata_size);
memcpy(_CallbacksDataBuf.Data + (size_t)curr_cmd->UserCallbackDataOffset, userdata, userdata_size);
}
AddDrawCmd(); // Force a new command after us (see comment below)
}
// Compare ClipRect, TextureId and VtxOffset with a single memcmp()
#define ImDrawCmd_HeaderSize (offsetof(ImDrawCmd, VtxOffset) + sizeof(unsigned int))
#define ImDrawCmd_HeaderCompare(CMD_LHS, CMD_RHS) (memcmp(CMD_LHS, CMD_RHS, ImDrawCmd_HeaderSize)) // Compare ClipRect, TextureId, VtxOffset
#define ImDrawCmd_HeaderCopy(CMD_DST, CMD_SRC) (memcpy(CMD_DST, CMD_SRC, ImDrawCmd_HeaderSize)) // Copy ClipRect, TextureId, VtxOffset
#define ImDrawCmd_AreSequentialIdxOffset(CMD_0, CMD_1) (CMD_0->IdxOffset + CMD_0->ElemCount == CMD_1->IdxOffset)
// Try to merge two last draw commands
void ImDrawList::_TryMergeDrawCmds()
{
IM_ASSERT_PARANOID(CmdBuffer.Size > 0);
ImDrawCmd* curr_cmd = &CmdBuffer.Data[CmdBuffer.Size - 1];
ImDrawCmd* prev_cmd = curr_cmd - 1;
if (ImDrawCmd_HeaderCompare(curr_cmd, prev_cmd) == 0 && ImDrawCmd_AreSequentialIdxOffset(prev_cmd, curr_cmd) && curr_cmd->UserCallback == NULL && prev_cmd->UserCallback == NULL)
{
prev_cmd->ElemCount += curr_cmd->ElemCount;
CmdBuffer.pop_back();
}
}
// Our scheme may appears a bit unusual, basically we want the most-common calls AddLine AddRect etc. to not have to perform any check so we always have a command ready in the stack.
// The cost of figuring out if a new command has to be added or if we can merge is paid in those Update** functions only.
void ImDrawList::_OnChangedClipRect()
{
// If current command is used with different settings we need to add a new command
IM_ASSERT_PARANOID(CmdBuffer.Size > 0);
ImDrawCmd* curr_cmd = &CmdBuffer.Data[CmdBuffer.Size - 1];
if (curr_cmd->ElemCount != 0 && memcmp(&curr_cmd->ClipRect, &_CmdHeader.ClipRect, sizeof(ImVec4)) != 0)
{
AddDrawCmd();
return;
}
IM_ASSERT(curr_cmd->UserCallback == NULL);
// Try to merge with previous command if it matches, else use current command
ImDrawCmd* prev_cmd = curr_cmd - 1;
if (curr_cmd->ElemCount == 0 && CmdBuffer.Size > 1 && ImDrawCmd_HeaderCompare(&_CmdHeader, prev_cmd) == 0 && ImDrawCmd_AreSequentialIdxOffset(prev_cmd, curr_cmd) && prev_cmd->UserCallback == NULL)
{
CmdBuffer.pop_back();
return;
}
curr_cmd->ClipRect = _CmdHeader.ClipRect;
}
void ImDrawList::_OnChangedTextureID()
{
// If current command is used with different settings we need to add a new command
IM_ASSERT_PARANOID(CmdBuffer.Size > 0);
ImDrawCmd* curr_cmd = &CmdBuffer.Data[CmdBuffer.Size - 1];
if (curr_cmd->ElemCount != 0 && curr_cmd->TextureId != _CmdHeader.TextureId)
{
AddDrawCmd();
return;
}
IM_ASSERT(curr_cmd->UserCallback == NULL);
// Try to merge with previous command if it matches, else use current command
ImDrawCmd* prev_cmd = curr_cmd - 1;
if (curr_cmd->ElemCount == 0 && CmdBuffer.Size > 1 && ImDrawCmd_HeaderCompare(&_CmdHeader, prev_cmd) == 0 && ImDrawCmd_AreSequentialIdxOffset(prev_cmd, curr_cmd) && prev_cmd->UserCallback == NULL)
{
CmdBuffer.pop_back();
return;
}
curr_cmd->TextureId = _CmdHeader.TextureId;
}
void ImDrawList::_OnChangedVtxOffset()
{
// We don't need to compare curr_cmd->VtxOffset != _CmdHeader.VtxOffset because we know it'll be different at the time we call this.
_VtxCurrentIdx = 0;
IM_ASSERT_PARANOID(CmdBuffer.Size > 0);
ImDrawCmd* curr_cmd = &CmdBuffer.Data[CmdBuffer.Size - 1];
//IM_ASSERT(curr_cmd->VtxOffset != _CmdHeader.VtxOffset); // See #3349
if (curr_cmd->ElemCount != 0)
{
AddDrawCmd();
return;
}
IM_ASSERT(curr_cmd->UserCallback == NULL);
curr_cmd->VtxOffset = _CmdHeader.VtxOffset;
}
int ImDrawList::_CalcCircleAutoSegmentCount(float radius) const
{
// Automatic segment count
const int radius_idx = (int)(radius + 0.999999f); // ceil to never reduce accuracy
if (radius_idx >= 0 && radius_idx < IM_ARRAYSIZE(_Data->CircleSegmentCounts))
return _Data->CircleSegmentCounts[radius_idx]; // Use cached value
else
return IM_DRAWLIST_CIRCLE_AUTO_SEGMENT_CALC(radius, _Data->CircleSegmentMaxError);
}
// Render-level scissoring. This is passed down to your render function but not used for CPU-side coarse clipping. Prefer using higher-level ImGui::PushClipRect() to affect logic (hit-testing and widget culling)
void ImDrawList::PushClipRect(const ImVec2& cr_min, const ImVec2& cr_max, bool intersect_with_current_clip_rect)
{
ImVec4 cr(cr_min.x, cr_min.y, cr_max.x, cr_max.y);
if (intersect_with_current_clip_rect)
{
ImVec4 current = _CmdHeader.ClipRect;
if (cr.x < current.x) cr.x = current.x;
if (cr.y < current.y) cr.y = current.y;
if (cr.z > current.z) cr.z = current.z;
if (cr.w > current.w) cr.w = current.w;
}
cr.z = ImMax(cr.x, cr.z);
cr.w = ImMax(cr.y, cr.w);
_ClipRectStack.push_back(cr);
_CmdHeader.ClipRect = cr;
_OnChangedClipRect();
}
void ImDrawList::PushClipRectFullScreen()
{
PushClipRect(ImVec2(_Data->ClipRectFullscreen.x, _Data->ClipRectFullscreen.y), ImVec2(_Data->ClipRectFullscreen.z, _Data->ClipRectFullscreen.w));
}
void ImDrawList::PopClipRect()
{
_ClipRectStack.pop_back();
_CmdHeader.ClipRect = (_ClipRectStack.Size == 0) ? _Data->ClipRectFullscreen : _ClipRectStack.Data[_ClipRectStack.Size - 1];
_OnChangedClipRect();
}
void ImDrawList::PushTextureID(ImTextureID texture_id)
{
_TextureIdStack.push_back(texture_id);
_CmdHeader.TextureId = texture_id;
_OnChangedTextureID();
}
void ImDrawList::PopTextureID()
{
_TextureIdStack.pop_back();
_CmdHeader.TextureId = (_TextureIdStack.Size == 0) ? (ImTextureID)NULL : _TextureIdStack.Data[_TextureIdStack.Size - 1];
_OnChangedTextureID();
}
// This is used by ImGui::PushFont()/PopFont(). It works because we never use _TextureIdStack[] elsewhere than in PushTextureID()/PopTextureID().
void ImDrawList::_SetTextureID(ImTextureID texture_id)
{
if (_CmdHeader.TextureId == texture_id)
return;
_CmdHeader.TextureId = texture_id;
_OnChangedTextureID();
}
// Reserve space for a number of vertices and indices.
// You must finish filling your reserved data before calling PrimReserve() again, as it may reallocate or
// submit the intermediate results. PrimUnreserve() can be used to release unused allocations.
void ImDrawList::PrimReserve(int idx_count, int vtx_count)
{
// Large mesh support (when enabled)
IM_ASSERT_PARANOID(idx_count >= 0 && vtx_count >= 0);
if (sizeof(ImDrawIdx) == 2 && (_VtxCurrentIdx + vtx_count >= (1 << 16)) && (Flags & ImDrawListFlags_AllowVtxOffset))
{
// FIXME: In theory we should be testing that vtx_count <64k here.
// In practice, RenderText() relies on reserving ahead for a worst case scenario so it is currently useful for us
// to not make that check until we rework the text functions to handle clipping and large horizontal lines better.
_CmdHeader.VtxOffset = VtxBuffer.Size;
_OnChangedVtxOffset();
}
ImDrawCmd* draw_cmd = &CmdBuffer.Data[CmdBuffer.Size - 1];
draw_cmd->ElemCount += idx_count;
int vtx_buffer_old_size = VtxBuffer.Size;
VtxBuffer.resize(vtx_buffer_old_size + vtx_count);
_VtxWritePtr = VtxBuffer.Data + vtx_buffer_old_size;
int idx_buffer_old_size = IdxBuffer.Size;
IdxBuffer.resize(idx_buffer_old_size + idx_count);
_IdxWritePtr = IdxBuffer.Data + idx_buffer_old_size;
}
// Release the number of reserved vertices/indices from the end of the last reservation made with PrimReserve().
void ImDrawList::PrimUnreserve(int idx_count, int vtx_count)
{
IM_ASSERT_PARANOID(idx_count >= 0 && vtx_count >= 0);
ImDrawCmd* draw_cmd = &CmdBuffer.Data[CmdBuffer.Size - 1];
draw_cmd->ElemCount -= idx_count;
VtxBuffer.shrink(VtxBuffer.Size - vtx_count);
IdxBuffer.shrink(IdxBuffer.Size - idx_count);
}
// Fully unrolled with inline call to keep our debug builds decently fast.
void ImDrawList::PrimRect(const ImVec2& a, const ImVec2& c, ImU32 col)
{
ImVec2 b(c.x, a.y), d(a.x, c.y), uv(_Data->TexUvWhitePixel);
ImDrawIdx idx = (ImDrawIdx)_VtxCurrentIdx;
_IdxWritePtr[0] = idx; _IdxWritePtr[1] = (ImDrawIdx)(idx+1); _IdxWritePtr[2] = (ImDrawIdx)(idx+2);
_IdxWritePtr[3] = idx; _IdxWritePtr[4] = (ImDrawIdx)(idx+2); _IdxWritePtr[5] = (ImDrawIdx)(idx+3);
_VtxWritePtr[0].pos = a; _VtxWritePtr[0].uv = uv; _VtxWritePtr[0].col = col;
_VtxWritePtr[1].pos = b; _VtxWritePtr[1].uv = uv; _VtxWritePtr[1].col = col;
_VtxWritePtr[2].pos = c; _VtxWritePtr[2].uv = uv; _VtxWritePtr[2].col = col;
_VtxWritePtr[3].pos = d; _VtxWritePtr[3].uv = uv; _VtxWritePtr[3].col = col;
_VtxWritePtr += 4;
_VtxCurrentIdx += 4;
_IdxWritePtr += 6;
}
void ImDrawList::PrimRectUV(const ImVec2& a, const ImVec2& c, const ImVec2& uv_a, const ImVec2& uv_c, ImU32 col)
{
ImVec2 b(c.x, a.y), d(a.x, c.y), uv_b(uv_c.x, uv_a.y), uv_d(uv_a.x, uv_c.y);
ImDrawIdx idx = (ImDrawIdx)_VtxCurrentIdx;
_IdxWritePtr[0] = idx; _IdxWritePtr[1] = (ImDrawIdx)(idx+1); _IdxWritePtr[2] = (ImDrawIdx)(idx+2);
_IdxWritePtr[3] = idx; _IdxWritePtr[4] = (ImDrawIdx)(idx+2); _IdxWritePtr[5] = (ImDrawIdx)(idx+3);
_VtxWritePtr[0].pos = a; _VtxWritePtr[0].uv = uv_a; _VtxWritePtr[0].col = col;
_VtxWritePtr[1].pos = b; _VtxWritePtr[1].uv = uv_b; _VtxWritePtr[1].col = col;
_VtxWritePtr[2].pos = c; _VtxWritePtr[2].uv = uv_c; _VtxWritePtr[2].col = col;
_VtxWritePtr[3].pos = d; _VtxWritePtr[3].uv = uv_d; _VtxWritePtr[3].col = col;
_VtxWritePtr += 4;
_VtxCurrentIdx += 4;
_IdxWritePtr += 6;
}
void ImDrawList::PrimQuadUV(const ImVec2& a, const ImVec2& b, const ImVec2& c, const ImVec2& d, const ImVec2& uv_a, const ImVec2& uv_b, const ImVec2& uv_c, const ImVec2& uv_d, ImU32 col)
{
ImDrawIdx idx = (ImDrawIdx)_VtxCurrentIdx;
_IdxWritePtr[0] = idx; _IdxWritePtr[1] = (ImDrawIdx)(idx+1); _IdxWritePtr[2] = (ImDrawIdx)(idx+2);
_IdxWritePtr[3] = idx; _IdxWritePtr[4] = (ImDrawIdx)(idx+2); _IdxWritePtr[5] = (ImDrawIdx)(idx+3);
_VtxWritePtr[0].pos = a; _VtxWritePtr[0].uv = uv_a; _VtxWritePtr[0].col = col;
_VtxWritePtr[1].pos = b; _VtxWritePtr[1].uv = uv_b; _VtxWritePtr[1].col = col;
_VtxWritePtr[2].pos = c; _VtxWritePtr[2].uv = uv_c; _VtxWritePtr[2].col = col;
_VtxWritePtr[3].pos = d; _VtxWritePtr[3].uv = uv_d; _VtxWritePtr[3].col = col;
_VtxWritePtr += 4;
_VtxCurrentIdx += 4;
_IdxWritePtr += 6;
}
// On AddPolyline() and AddConvexPolyFilled() we intentionally avoid using ImVec2 and superfluous function calls to optimize debug/non-inlined builds.
// - Those macros expects l-values and need to be used as their own statement.
// - Those macros are intentionally not surrounded by the 'do {} while (0)' idiom because even that translates to runtime with debug compilers.
#define IM_NORMALIZE2F_OVER_ZERO(VX,VY) { float d2 = VX*VX + VY*VY; if (d2 > 0.0f) { float inv_len = ImRsqrt(d2); VX *= inv_len; VY *= inv_len; } } (void)0
#define IM_FIXNORMAL2F_MAX_INVLEN2 100.0f // 500.0f (see #4053, #3366)
#define IM_FIXNORMAL2F(VX,VY) { float d2 = VX*VX + VY*VY; if (d2 > 0.000001f) { float inv_len2 = 1.0f / d2; if (inv_len2 > IM_FIXNORMAL2F_MAX_INVLEN2) inv_len2 = IM_FIXNORMAL2F_MAX_INVLEN2; VX *= inv_len2; VY *= inv_len2; } } (void)0
// TODO: Thickness anti-aliased lines cap are missing their AA fringe.
// We avoid using the ImVec2 math operators here to reduce cost to a minimum for debug/non-inlined builds.
void ImDrawList::AddPolyline(const ImVec2* points, const int points_count, ImU32 col, ImDrawFlags flags, float thickness)
{
if (points_count < 2 || (col & IM_COL32_A_MASK) == 0)
return;
const bool closed = (flags & ImDrawFlags_Closed) != 0;
const ImVec2 opaque_uv = _Data->TexUvWhitePixel;
const int count = closed ? points_count : points_count - 1; // The number of line segments we need to draw
const bool thick_line = (thickness > _FringeScale);
if (Flags & ImDrawListFlags_AntiAliasedLines)
{
// Anti-aliased stroke
const float AA_SIZE = _FringeScale;
const ImU32 col_trans = col & ~IM_COL32_A_MASK;
// Thicknesses <1.0 should behave like thickness 1.0
thickness = ImMax(thickness, 1.0f);
const int integer_thickness = (int)thickness;
const float fractional_thickness = thickness - integer_thickness;
// Do we want to draw this line using a texture?
// - For now, only draw integer-width lines using textures to avoid issues with the way scaling occurs, could be improved.
// - If AA_SIZE is not 1.0f we cannot use the texture path.
const bool use_texture = (Flags & ImDrawListFlags_AntiAliasedLinesUseTex) && (integer_thickness < IM_DRAWLIST_TEX_LINES_WIDTH_MAX) && (fractional_thickness <= 0.00001f) && (AA_SIZE == 1.0f);
// We should never hit this, because NewFrame() doesn't set ImDrawListFlags_AntiAliasedLinesUseTex unless ImFontAtlasFlags_NoBakedLines is off
IM_ASSERT_PARANOID(!use_texture || !(_Data->Font->ContainerAtlas->Flags & ImFontAtlasFlags_NoBakedLines));
const int idx_count = use_texture ? (count * 6) : (thick_line ? count * 18 : count * 12);
const int vtx_count = use_texture ? (points_count * 2) : (thick_line ? points_count * 4 : points_count * 3);
PrimReserve(idx_count, vtx_count);
// Temporary buffer
// The first <points_count> items are normals at each line point, then after that there are either 2 or 4 temp points for each line point
_Data->TempBuffer.reserve_discard(points_count * ((use_texture || !thick_line) ? 3 : 5));
ImVec2* temp_normals = _Data->TempBuffer.Data;
ImVec2* temp_points = temp_normals + points_count;
// Calculate normals (tangents) for each line segment
for (int i1 = 0; i1 < count; i1++)
{
const int i2 = (i1 + 1) == points_count ? 0 : i1 + 1;
float dx = points[i2].x - points[i1].x;
float dy = points[i2].y - points[i1].y;
IM_NORMALIZE2F_OVER_ZERO(dx, dy);
temp_normals[i1].x = dy;
temp_normals[i1].y = -dx;
}
if (!closed)
temp_normals[points_count - 1] = temp_normals[points_count - 2];
// If we are drawing a one-pixel-wide line without a texture, or a textured line of any width, we only need 2 or 3 vertices per point
if (use_texture || !thick_line)
{
// [PATH 1] Texture-based lines (thick or non-thick)
// [PATH 2] Non texture-based lines (non-thick)
// The width of the geometry we need to draw - this is essentially <thickness> pixels for the line itself, plus "one pixel" for AA.
// - In the texture-based path, we don't use AA_SIZE here because the +1 is tied to the generated texture
// (see ImFontAtlasBuildRenderLinesTexData() function), and so alternate values won't work without changes to that code.
// - In the non texture-based paths, we would allow AA_SIZE to potentially be != 1.0f with a patch (e.g. fringe_scale patch to
// allow scaling geometry while preserving one-screen-pixel AA fringe).
const float half_draw_size = use_texture ? ((thickness * 0.5f) + 1) : AA_SIZE;
// If line is not closed, the first and last points need to be generated differently as there are no normals to blend
if (!closed)
{
temp_points[0] = points[0] + temp_normals[0] * half_draw_size;
temp_points[1] = points[0] - temp_normals[0] * half_draw_size;
temp_points[(points_count-1)*2+0] = points[points_count-1] + temp_normals[points_count-1] * half_draw_size;
temp_points[(points_count-1)*2+1] = points[points_count-1] - temp_normals[points_count-1] * half_draw_size;
}
// Generate the indices to form a number of triangles for each line segment, and the vertices for the line edges
// This takes points n and n+1 and writes into n+1, with the first point in a closed line being generated from the final one (as n+1 wraps)
// FIXME-OPT: Merge the different loops, possibly remove the temporary buffer.
unsigned int idx1 = _VtxCurrentIdx; // Vertex index for start of line segment
for (int i1 = 0; i1 < count; i1++) // i1 is the first point of the line segment
{
const int i2 = (i1 + 1) == points_count ? 0 : i1 + 1; // i2 is the second point of the line segment
const unsigned int idx2 = ((i1 + 1) == points_count) ? _VtxCurrentIdx : (idx1 + (use_texture ? 2 : 3)); // Vertex index for end of segment
// Average normals
float dm_x = (temp_normals[i1].x + temp_normals[i2].x) * 0.5f;
float dm_y = (temp_normals[i1].y + temp_normals[i2].y) * 0.5f;
IM_FIXNORMAL2F(dm_x, dm_y);
dm_x *= half_draw_size; // dm_x, dm_y are offset to the outer edge of the AA area
dm_y *= half_draw_size;
// Add temporary vertexes for the outer edges
ImVec2* out_vtx = &temp_points[i2 * 2];
out_vtx[0].x = points[i2].x + dm_x;
out_vtx[0].y = points[i2].y + dm_y;
out_vtx[1].x = points[i2].x - dm_x;
out_vtx[1].y = points[i2].y - dm_y;
if (use_texture)
{
// Add indices for two triangles
_IdxWritePtr[0] = (ImDrawIdx)(idx2 + 0); _IdxWritePtr[1] = (ImDrawIdx)(idx1 + 0); _IdxWritePtr[2] = (ImDrawIdx)(idx1 + 1); // Right tri
_IdxWritePtr[3] = (ImDrawIdx)(idx2 + 1); _IdxWritePtr[4] = (ImDrawIdx)(idx1 + 1); _IdxWritePtr[5] = (ImDrawIdx)(idx2 + 0); // Left tri
_IdxWritePtr += 6;
}
else
{
// Add indexes for four triangles
_IdxWritePtr[0] = (ImDrawIdx)(idx2 + 0); _IdxWritePtr[1] = (ImDrawIdx)(idx1 + 0); _IdxWritePtr[2] = (ImDrawIdx)(idx1 + 2); // Right tri 1
_IdxWritePtr[3] = (ImDrawIdx)(idx1 + 2); _IdxWritePtr[4] = (ImDrawIdx)(idx2 + 2); _IdxWritePtr[5] = (ImDrawIdx)(idx2 + 0); // Right tri 2
_IdxWritePtr[6] = (ImDrawIdx)(idx2 + 1); _IdxWritePtr[7] = (ImDrawIdx)(idx1 + 1); _IdxWritePtr[8] = (ImDrawIdx)(idx1 + 0); // Left tri 1
_IdxWritePtr[9] = (ImDrawIdx)(idx1 + 0); _IdxWritePtr[10] = (ImDrawIdx)(idx2 + 0); _IdxWritePtr[11] = (ImDrawIdx)(idx2 + 1); // Left tri 2
_IdxWritePtr += 12;
}
idx1 = idx2;
}
// Add vertexes for each point on the line
if (use_texture)
{
// If we're using textures we only need to emit the left/right edge vertices
ImVec4 tex_uvs = _Data->TexUvLines[integer_thickness];
/*if (fractional_thickness != 0.0f) // Currently always zero when use_texture==false!
{
const ImVec4 tex_uvs_1 = _Data->TexUvLines[integer_thickness + 1];
tex_uvs.x = tex_uvs.x + (tex_uvs_1.x - tex_uvs.x) * fractional_thickness; // inlined ImLerp()
tex_uvs.y = tex_uvs.y + (tex_uvs_1.y - tex_uvs.y) * fractional_thickness;
tex_uvs.z = tex_uvs.z + (tex_uvs_1.z - tex_uvs.z) * fractional_thickness;
tex_uvs.w = tex_uvs.w + (tex_uvs_1.w - tex_uvs.w) * fractional_thickness;
}*/
ImVec2 tex_uv0(tex_uvs.x, tex_uvs.y);
ImVec2 tex_uv1(tex_uvs.z, tex_uvs.w);
for (int i = 0; i < points_count; i++)
{
_VtxWritePtr[0].pos = temp_points[i * 2 + 0]; _VtxWritePtr[0].uv = tex_uv0; _VtxWritePtr[0].col = col; // Left-side outer edge
_VtxWritePtr[1].pos = temp_points[i * 2 + 1]; _VtxWritePtr[1].uv = tex_uv1; _VtxWritePtr[1].col = col; // Right-side outer edge
_VtxWritePtr += 2;
}
}
else
{
// If we're not using a texture, we need the center vertex as well
for (int i = 0; i < points_count; i++)
{
_VtxWritePtr[0].pos = points[i]; _VtxWritePtr[0].uv = opaque_uv; _VtxWritePtr[0].col = col; // Center of line
_VtxWritePtr[1].pos = temp_points[i * 2 + 0]; _VtxWritePtr[1].uv = opaque_uv; _VtxWritePtr[1].col = col_trans; // Left-side outer edge
_VtxWritePtr[2].pos = temp_points[i * 2 + 1]; _VtxWritePtr[2].uv = opaque_uv; _VtxWritePtr[2].col = col_trans; // Right-side outer edge
_VtxWritePtr += 3;
}
}
}
else
{
// [PATH 2] Non texture-based lines (thick): we need to draw the solid line core and thus require four vertices per point
const float half_inner_thickness = (thickness - AA_SIZE) * 0.5f;
// If line is not closed, the first and last points need to be generated differently as there are no normals to blend
if (!closed)
{
const int points_last = points_count - 1;
temp_points[0] = points[0] + temp_normals[0] * (half_inner_thickness + AA_SIZE);
temp_points[1] = points[0] + temp_normals[0] * (half_inner_thickness);
temp_points[2] = points[0] - temp_normals[0] * (half_inner_thickness);
temp_points[3] = points[0] - temp_normals[0] * (half_inner_thickness + AA_SIZE);
temp_points[points_last * 4 + 0] = points[points_last] + temp_normals[points_last] * (half_inner_thickness + AA_SIZE);
temp_points[points_last * 4 + 1] = points[points_last] + temp_normals[points_last] * (half_inner_thickness);
temp_points[points_last * 4 + 2] = points[points_last] - temp_normals[points_last] * (half_inner_thickness);
temp_points[points_last * 4 + 3] = points[points_last] - temp_normals[points_last] * (half_inner_thickness + AA_SIZE);
}
// Generate the indices to form a number of triangles for each line segment, and the vertices for the line edges
// This takes points n and n+1 and writes into n+1, with the first point in a closed line being generated from the final one (as n+1 wraps)
// FIXME-OPT: Merge the different loops, possibly remove the temporary buffer.
unsigned int idx1 = _VtxCurrentIdx; // Vertex index for start of line segment
for (int i1 = 0; i1 < count; i1++) // i1 is the first point of the line segment
{
const int i2 = (i1 + 1) == points_count ? 0 : (i1 + 1); // i2 is the second point of the line segment
const unsigned int idx2 = (i1 + 1) == points_count ? _VtxCurrentIdx : (idx1 + 4); // Vertex index for end of segment
// Average normals
float dm_x = (temp_normals[i1].x + temp_normals[i2].x) * 0.5f;
float dm_y = (temp_normals[i1].y + temp_normals[i2].y) * 0.5f;
IM_FIXNORMAL2F(dm_x, dm_y);
float dm_out_x = dm_x * (half_inner_thickness + AA_SIZE);
float dm_out_y = dm_y * (half_inner_thickness + AA_SIZE);
float dm_in_x = dm_x * half_inner_thickness;
float dm_in_y = dm_y * half_inner_thickness;
// Add temporary vertices
ImVec2* out_vtx = &temp_points[i2 * 4];
out_vtx[0].x = points[i2].x + dm_out_x;
out_vtx[0].y = points[i2].y + dm_out_y;
out_vtx[1].x = points[i2].x + dm_in_x;
out_vtx[1].y = points[i2].y + dm_in_y;
out_vtx[2].x = points[i2].x - dm_in_x;
out_vtx[2].y = points[i2].y - dm_in_y;
out_vtx[3].x = points[i2].x - dm_out_x;
out_vtx[3].y = points[i2].y - dm_out_y;
// Add indexes
_IdxWritePtr[0] = (ImDrawIdx)(idx2 + 1); _IdxWritePtr[1] = (ImDrawIdx)(idx1 + 1); _IdxWritePtr[2] = (ImDrawIdx)(idx1 + 2);
_IdxWritePtr[3] = (ImDrawIdx)(idx1 + 2); _IdxWritePtr[4] = (ImDrawIdx)(idx2 + 2); _IdxWritePtr[5] = (ImDrawIdx)(idx2 + 1);
_IdxWritePtr[6] = (ImDrawIdx)(idx2 + 1); _IdxWritePtr[7] = (ImDrawIdx)(idx1 + 1); _IdxWritePtr[8] = (ImDrawIdx)(idx1 + 0);
_IdxWritePtr[9] = (ImDrawIdx)(idx1 + 0); _IdxWritePtr[10] = (ImDrawIdx)(idx2 + 0); _IdxWritePtr[11] = (ImDrawIdx)(idx2 + 1);
_IdxWritePtr[12] = (ImDrawIdx)(idx2 + 2); _IdxWritePtr[13] = (ImDrawIdx)(idx1 + 2); _IdxWritePtr[14] = (ImDrawIdx)(idx1 + 3);
_IdxWritePtr[15] = (ImDrawIdx)(idx1 + 3); _IdxWritePtr[16] = (ImDrawIdx)(idx2 + 3); _IdxWritePtr[17] = (ImDrawIdx)(idx2 + 2);
_IdxWritePtr += 18;
idx1 = idx2;
}
// Add vertices
for (int i = 0; i < points_count; i++)
{
_VtxWritePtr[0].pos = temp_points[i * 4 + 0]; _VtxWritePtr[0].uv = opaque_uv; _VtxWritePtr[0].col = col_trans;
_VtxWritePtr[1].pos = temp_points[i * 4 + 1]; _VtxWritePtr[1].uv = opaque_uv; _VtxWritePtr[1].col = col;
_VtxWritePtr[2].pos = temp_points[i * 4 + 2]; _VtxWritePtr[2].uv = opaque_uv; _VtxWritePtr[2].col = col;
_VtxWritePtr[3].pos = temp_points[i * 4 + 3]; _VtxWritePtr[3].uv = opaque_uv; _VtxWritePtr[3].col = col_trans;
_VtxWritePtr += 4;
}
}
_VtxCurrentIdx += (ImDrawIdx)vtx_count;
}
else
{
// [PATH 4] Non texture-based, Non anti-aliased lines
const int idx_count = count * 6;
const int vtx_count = count * 4; // FIXME-OPT: Not sharing edges
PrimReserve(idx_count, vtx_count);
for (int i1 = 0; i1 < count; i1++)
{
const int i2 = (i1 + 1) == points_count ? 0 : i1 + 1;
const ImVec2& p1 = points[i1];
const ImVec2& p2 = points[i2];
float dx = p2.x - p1.x;
float dy = p2.y - p1.y;
IM_NORMALIZE2F_OVER_ZERO(dx, dy);
dx *= (thickness * 0.5f);
dy *= (thickness * 0.5f);
_VtxWritePtr[0].pos.x = p1.x + dy; _VtxWritePtr[0].pos.y = p1.y - dx; _VtxWritePtr[0].uv = opaque_uv; _VtxWritePtr[0].col = col;
_VtxWritePtr[1].pos.x = p2.x + dy; _VtxWritePtr[1].pos.y = p2.y - dx; _VtxWritePtr[1].uv = opaque_uv; _VtxWritePtr[1].col = col;
_VtxWritePtr[2].pos.x = p2.x - dy; _VtxWritePtr[2].pos.y = p2.y + dx; _VtxWritePtr[2].uv = opaque_uv; _VtxWritePtr[2].col = col;
_VtxWritePtr[3].pos.x = p1.x - dy; _VtxWritePtr[3].pos.y = p1.y + dx; _VtxWritePtr[3].uv = opaque_uv; _VtxWritePtr[3].col = col;
_VtxWritePtr += 4;
_IdxWritePtr[0] = (ImDrawIdx)(_VtxCurrentIdx); _IdxWritePtr[1] = (ImDrawIdx)(_VtxCurrentIdx + 1); _IdxWritePtr[2] = (ImDrawIdx)(_VtxCurrentIdx + 2);
_IdxWritePtr[3] = (ImDrawIdx)(_VtxCurrentIdx); _IdxWritePtr[4] = (ImDrawIdx)(_VtxCurrentIdx + 2); _IdxWritePtr[5] = (ImDrawIdx)(_VtxCurrentIdx + 3);
_IdxWritePtr += 6;
_VtxCurrentIdx += 4;
}
}
}
// - We intentionally avoid using ImVec2 and its math operators here to reduce cost to a minimum for debug/non-inlined builds.
// - Filled shapes must always use clockwise winding order. The anti-aliasing fringe depends on it. Counter-clockwise shapes will have "inward" anti-aliasing.
void ImDrawList::AddConvexPolyFilled(const ImVec2* points, const int points_count, ImU32 col)
{
if (points_count < 3 || (col & IM_COL32_A_MASK) == 0)
return;
const ImVec2 uv = _Data->TexUvWhitePixel;
if (Flags & ImDrawListFlags_AntiAliasedFill)
{
// Anti-aliased Fill
const float AA_SIZE = _FringeScale;
const ImU32 col_trans = col & ~IM_COL32_A_MASK;
const int idx_count = (points_count - 2)*3 + points_count * 6;
const int vtx_count = (points_count * 2);
PrimReserve(idx_count, vtx_count);
// Add indexes for fill
unsigned int vtx_inner_idx = _VtxCurrentIdx;
unsigned int vtx_outer_idx = _VtxCurrentIdx + 1;
for (int i = 2; i < points_count; i++)
{
_IdxWritePtr[0] = (ImDrawIdx)(vtx_inner_idx); _IdxWritePtr[1] = (ImDrawIdx)(vtx_inner_idx + ((i - 1) << 1)); _IdxWritePtr[2] = (ImDrawIdx)(vtx_inner_idx + (i << 1));
_IdxWritePtr += 3;
}
// Compute normals
_Data->TempBuffer.reserve_discard(points_count);
ImVec2* temp_normals = _Data->TempBuffer.Data;
for (int i0 = points_count - 1, i1 = 0; i1 < points_count; i0 = i1++)
{
const ImVec2& p0 = points[i0];
const ImVec2& p1 = points[i1];
float dx = p1.x - p0.x;
float dy = p1.y - p0.y;
IM_NORMALIZE2F_OVER_ZERO(dx, dy);
temp_normals[i0].x = dy;
temp_normals[i0].y = -dx;
}
for (int i0 = points_count - 1, i1 = 0; i1 < points_count; i0 = i1++)
{
// Average normals
const ImVec2& n0 = temp_normals[i0];
const ImVec2& n1 = temp_normals[i1];
float dm_x = (n0.x + n1.x) * 0.5f;
float dm_y = (n0.y + n1.y) * 0.5f;
IM_FIXNORMAL2F(dm_x, dm_y);
dm_x *= AA_SIZE * 0.5f;
dm_y *= AA_SIZE * 0.5f;
// Add vertices
_VtxWritePtr[0].pos.x = (points[i1].x - dm_x); _VtxWritePtr[0].pos.y = (points[i1].y - dm_y); _VtxWritePtr[0].uv = uv; _VtxWritePtr[0].col = col; // Inner
_VtxWritePtr[1].pos.x = (points[i1].x + dm_x); _VtxWritePtr[1].pos.y = (points[i1].y + dm_y); _VtxWritePtr[1].uv = uv; _VtxWritePtr[1].col = col_trans; // Outer
_VtxWritePtr += 2;
// Add indexes for fringes
_IdxWritePtr[0] = (ImDrawIdx)(vtx_inner_idx + (i1 << 1)); _IdxWritePtr[1] = (ImDrawIdx)(vtx_inner_idx + (i0 << 1)); _IdxWritePtr[2] = (ImDrawIdx)(vtx_outer_idx + (i0 << 1));
_IdxWritePtr[3] = (ImDrawIdx)(vtx_outer_idx + (i0 << 1)); _IdxWritePtr[4] = (ImDrawIdx)(vtx_outer_idx + (i1 << 1)); _IdxWritePtr[5] = (ImDrawIdx)(vtx_inner_idx + (i1 << 1));
_IdxWritePtr += 6;
}
_VtxCurrentIdx += (ImDrawIdx)vtx_count;
}
else
{
// Non Anti-aliased Fill
const int idx_count = (points_count - 2)*3;
const int vtx_count = points_count;
PrimReserve(idx_count, vtx_count);
for (int i = 0; i < vtx_count; i++)
{
_VtxWritePtr[0].pos = points[i]; _VtxWritePtr[0].uv = uv; _VtxWritePtr[0].col = col;
_VtxWritePtr++;
}
for (int i = 2; i < points_count; i++)
{
_IdxWritePtr[0] = (ImDrawIdx)(_VtxCurrentIdx); _IdxWritePtr[1] = (ImDrawIdx)(_VtxCurrentIdx + i - 1); _IdxWritePtr[2] = (ImDrawIdx)(_VtxCurrentIdx + i);
_IdxWritePtr += 3;
}
_VtxCurrentIdx += (ImDrawIdx)vtx_count;
}
}
void ImDrawList::_PathArcToFastEx(const ImVec2& center, float radius, int a_min_sample, int a_max_sample, int a_step)
{
if (radius < 0.5f)
{
_Path.push_back(center);
return;
}
// Calculate arc auto segment step size
if (a_step <= 0)
a_step = IM_DRAWLIST_ARCFAST_SAMPLE_MAX / _CalcCircleAutoSegmentCount(radius);
// Make sure we never do steps larger than one quarter of the circle
a_step = ImClamp(a_step, 1, IM_DRAWLIST_ARCFAST_TABLE_SIZE / 4);
const int sample_range = ImAbs(a_max_sample - a_min_sample);
const int a_next_step = a_step;
int samples = sample_range + 1;
bool extra_max_sample = false;
if (a_step > 1)
{
samples = sample_range / a_step + 1;
const int overstep = sample_range % a_step;
if (overstep > 0)
{
extra_max_sample = true;
samples++;
// When we have overstep to avoid awkwardly looking one long line and one tiny one at the end,
// distribute first step range evenly between them by reducing first step size.
if (sample_range > 0)
a_step -= (a_step - overstep) / 2;
}
}
_Path.resize(_Path.Size + samples);
ImVec2* out_ptr = _Path.Data + (_Path.Size - samples);
int sample_index = a_min_sample;
if (sample_index < 0 || sample_index >= IM_DRAWLIST_ARCFAST_SAMPLE_MAX)
{
sample_index = sample_index % IM_DRAWLIST_ARCFAST_SAMPLE_MAX;
if (sample_index < 0)
sample_index += IM_DRAWLIST_ARCFAST_SAMPLE_MAX;
}
if (a_max_sample >= a_min_sample)
{
for (int a = a_min_sample; a <= a_max_sample; a += a_step, sample_index += a_step, a_step = a_next_step)
{
// a_step is clamped to IM_DRAWLIST_ARCFAST_SAMPLE_MAX, so we have guaranteed that it will not wrap over range twice or more
if (sample_index >= IM_DRAWLIST_ARCFAST_SAMPLE_MAX)
sample_index -= IM_DRAWLIST_ARCFAST_SAMPLE_MAX;
const ImVec2 s = _Data->ArcFastVtx[sample_index];
out_ptr->x = center.x + s.x * radius;
out_ptr->y = center.y + s.y * radius;
out_ptr++;
}
}
else
{
for (int a = a_min_sample; a >= a_max_sample; a -= a_step, sample_index -= a_step, a_step = a_next_step)
{
// a_step is clamped to IM_DRAWLIST_ARCFAST_SAMPLE_MAX, so we have guaranteed that it will not wrap over range twice or more
if (sample_index < 0)
sample_index += IM_DRAWLIST_ARCFAST_SAMPLE_MAX;
const ImVec2 s = _Data->ArcFastVtx[sample_index];
out_ptr->x = center.x + s.x * radius;
out_ptr->y = center.y + s.y * radius;
out_ptr++;
}
}
if (extra_max_sample)
{
int normalized_max_sample = a_max_sample % IM_DRAWLIST_ARCFAST_SAMPLE_MAX;
if (normalized_max_sample < 0)
normalized_max_sample += IM_DRAWLIST_ARCFAST_SAMPLE_MAX;
const ImVec2 s = _Data->ArcFastVtx[normalized_max_sample];
out_ptr->x = center.x + s.x * radius;
out_ptr->y = center.y + s.y * radius;
out_ptr++;
}
IM_ASSERT_PARANOID(_Path.Data + _Path.Size == out_ptr);
}
void ImDrawList::_PathArcToN(const ImVec2& center, float radius, float a_min, float a_max, int num_segments)
{
if (radius < 0.5f)
{
_Path.push_back(center);
return;
}
// Note that we are adding a point at both a_min and a_max.
// If you are trying to draw a full closed circle you don't want the overlapping points!
_Path.reserve(_Path.Size + (num_segments + 1));
for (int i = 0; i <= num_segments; i++)
{
const float a = a_min + ((float)i / (float)num_segments) * (a_max - a_min);
_Path.push_back(ImVec2(center.x + ImCos(a) * radius, center.y + ImSin(a) * radius));
}
}
// 0: East, 3: South, 6: West, 9: North, 12: East
void ImDrawList::PathArcToFast(const ImVec2& center, float radius, int a_min_of_12, int a_max_of_12)
{
if (radius < 0.5f)
{
_Path.push_back(center);
return;
}
_PathArcToFastEx(center, radius, a_min_of_12 * IM_DRAWLIST_ARCFAST_SAMPLE_MAX / 12, a_max_of_12 * IM_DRAWLIST_ARCFAST_SAMPLE_MAX / 12, 0);
}
void ImDrawList::PathArcTo(const ImVec2& center, float radius, float a_min, float a_max, int num_segments)
{
if (radius < 0.5f)
{
_Path.push_back(center);
return;
}
if (num_segments > 0)
{
_PathArcToN(center, radius, a_min, a_max, num_segments);
return;
}
// Automatic segment count
if (radius <= _Data->ArcFastRadiusCutoff)
{
const bool a_is_reverse = a_max < a_min;
// We are going to use precomputed values for mid samples.
// Determine first and last sample in lookup table that belong to the arc.
const float a_min_sample_f = IM_DRAWLIST_ARCFAST_SAMPLE_MAX * a_min / (IM_PI * 2.0f);
const float a_max_sample_f = IM_DRAWLIST_ARCFAST_SAMPLE_MAX * a_max / (IM_PI * 2.0f);
const int a_min_sample = a_is_reverse ? (int)ImFloor(a_min_sample_f) : (int)ImCeil(a_min_sample_f);
const int a_max_sample = a_is_reverse ? (int)ImCeil(a_max_sample_f) : (int)ImFloor(a_max_sample_f);
const int a_mid_samples = a_is_reverse ? ImMax(a_min_sample - a_max_sample, 0) : ImMax(a_max_sample - a_min_sample, 0);
const float a_min_segment_angle = a_min_sample * IM_PI * 2.0f / IM_DRAWLIST_ARCFAST_SAMPLE_MAX;
const float a_max_segment_angle = a_max_sample * IM_PI * 2.0f / IM_DRAWLIST_ARCFAST_SAMPLE_MAX;
const bool a_emit_start = ImAbs(a_min_segment_angle - a_min) >= 1e-5f;
const bool a_emit_end = ImAbs(a_max - a_max_segment_angle) >= 1e-5f;
_Path.reserve(_Path.Size + (a_mid_samples + 1 + (a_emit_start ? 1 : 0) + (a_emit_end ? 1 : 0)));
if (a_emit_start)
_Path.push_back(ImVec2(center.x + ImCos(a_min) * radius, center.y + ImSin(a_min) * radius));
if (a_mid_samples > 0)
_PathArcToFastEx(center, radius, a_min_sample, a_max_sample, 0);
if (a_emit_end)
_Path.push_back(ImVec2(center.x + ImCos(a_max) * radius, center.y + ImSin(a_max) * radius));
}
else
{
const float arc_length = ImAbs(a_max - a_min);
const int circle_segment_count = _CalcCircleAutoSegmentCount(radius);
const int arc_segment_count = ImMax((int)ImCeil(circle_segment_count * arc_length / (IM_PI * 2.0f)), (int)(2.0f * IM_PI / arc_length));
_PathArcToN(center, radius, a_min, a_max, arc_segment_count);
}
}
void ImDrawList::PathEllipticalArcTo(const ImVec2& center, const ImVec2& radius, float rot, float a_min, float a_max, int num_segments)
{
if (num_segments <= 0)
num_segments = _CalcCircleAutoSegmentCount(ImMax(radius.x, radius.y)); // A bit pessimistic, maybe there's a better computation to do here.
_Path.reserve(_Path.Size + (num_segments + 1));
const float cos_rot = ImCos(rot);
const float sin_rot = ImSin(rot);
for (int i = 0; i <= num_segments; i++)
{
const float a = a_min + ((float)i / (float)num_segments) * (a_max - a_min);
ImVec2 point(ImCos(a) * radius.x, ImSin(a) * radius.y);
const ImVec2 rel((point.x * cos_rot) - (point.y * sin_rot), (point.x * sin_rot) + (point.y * cos_rot));
point.x = rel.x + center.x;
point.y = rel.y + center.y;
_Path.push_back(point);
}
}
ImVec2 ImBezierCubicCalc(const ImVec2& p1, const ImVec2& p2, const ImVec2& p3, const ImVec2& p4, float t)
{
float u = 1.0f - t;
float w1 = u * u * u;
float w2 = 3 * u * u * t;
float w3 = 3 * u * t * t;
float w4 = t * t * t;
return ImVec2(w1 * p1.x + w2 * p2.x + w3 * p3.x + w4 * p4.x, w1 * p1.y + w2 * p2.y + w3 * p3.y + w4 * p4.y);
}
ImVec2 ImBezierQuadraticCalc(const ImVec2& p1, const ImVec2& p2, const ImVec2& p3, float t)
{
float u = 1.0f - t;
float w1 = u * u;
float w2 = 2 * u * t;
float w3 = t * t;
return ImVec2(w1 * p1.x + w2 * p2.x + w3 * p3.x, w1 * p1.y + w2 * p2.y + w3 * p3.y);
}
// Closely mimics ImBezierCubicClosestPointCasteljau() in imgui.cpp
static void PathBezierCubicCurveToCasteljau(ImVector<ImVec2>* path, float x1, float y1, float x2, float y2, float x3, float y3, float x4, float y4, float tess_tol, int level)
{
float dx = x4 - x1;
float dy = y4 - y1;
float d2 = (x2 - x4) * dy - (y2 - y4) * dx;
float d3 = (x3 - x4) * dy - (y3 - y4) * dx;
d2 = (d2 >= 0) ? d2 : -d2;
d3 = (d3 >= 0) ? d3 : -d3;
if ((d2 + d3) * (d2 + d3) < tess_tol * (dx * dx + dy * dy))
{
path->push_back(ImVec2(x4, y4));
}
else if (level < 10)
{
float x12 = (x1 + x2) * 0.5f, y12 = (y1 + y2) * 0.5f;
float x23 = (x2 + x3) * 0.5f, y23 = (y2 + y3) * 0.5f;
float x34 = (x3 + x4) * 0.5f, y34 = (y3 + y4) * 0.5f;
float x123 = (x12 + x23) * 0.5f, y123 = (y12 + y23) * 0.5f;
float x234 = (x23 + x34) * 0.5f, y234 = (y23 + y34) * 0.5f;
float x1234 = (x123 + x234) * 0.5f, y1234 = (y123 + y234) * 0.5f;
PathBezierCubicCurveToCasteljau(path, x1, y1, x12, y12, x123, y123, x1234, y1234, tess_tol, level + 1);
PathBezierCubicCurveToCasteljau(path, x1234, y1234, x234, y234, x34, y34, x4, y4, tess_tol, level + 1);
}
}
static void PathBezierQuadraticCurveToCasteljau(ImVector<ImVec2>* path, float x1, float y1, float x2, float y2, float x3, float y3, float tess_tol, int level)
{
float dx = x3 - x1, dy = y3 - y1;
float det = (x2 - x3) * dy - (y2 - y3) * dx;
if (det * det * 4.0f < tess_tol * (dx * dx + dy * dy))
{
path->push_back(ImVec2(x3, y3));
}
else if (level < 10)
{
float x12 = (x1 + x2) * 0.5f, y12 = (y1 + y2) * 0.5f;
float x23 = (x2 + x3) * 0.5f, y23 = (y2 + y3) * 0.5f;
float x123 = (x12 + x23) * 0.5f, y123 = (y12 + y23) * 0.5f;
PathBezierQuadraticCurveToCasteljau(path, x1, y1, x12, y12, x123, y123, tess_tol, level + 1);
PathBezierQuadraticCurveToCasteljau(path, x123, y123, x23, y23, x3, y3, tess_tol, level + 1);
}
}
void ImDrawList::PathBezierCubicCurveTo(const ImVec2& p2, const ImVec2& p3, const ImVec2& p4, int num_segments)
{
ImVec2 p1 = _Path.back();
if (num_segments == 0)
{
IM_ASSERT(_Data->CurveTessellationTol > 0.0f);
PathBezierCubicCurveToCasteljau(&_Path, p1.x, p1.y, p2.x, p2.y, p3.x, p3.y, p4.x, p4.y, _Data->CurveTessellationTol, 0); // Auto-tessellated
}
else
{
float t_step = 1.0f / (float)num_segments;
for (int i_step = 1; i_step <= num_segments; i_step++)
_Path.push_back(ImBezierCubicCalc(p1, p2, p3, p4, t_step * i_step));
}
}
void ImDrawList::PathBezierQuadraticCurveTo(const ImVec2& p2, const ImVec2& p3, int num_segments)
{
ImVec2 p1 = _Path.back();
if (num_segments == 0)
{
IM_ASSERT(_Data->CurveTessellationTol > 0.0f);
PathBezierQuadraticCurveToCasteljau(&_Path, p1.x, p1.y, p2.x, p2.y, p3.x, p3.y, _Data->CurveTessellationTol, 0);// Auto-tessellated
}
else
{
float t_step = 1.0f / (float)num_segments;
for (int i_step = 1; i_step <= num_segments; i_step++)
_Path.push_back(ImBezierQuadraticCalc(p1, p2, p3, t_step * i_step));
}
}
static inline ImDrawFlags FixRectCornerFlags(ImDrawFlags flags)
{
/*
IM_STATIC_ASSERT(ImDrawFlags_RoundCornersTopLeft == (1 << 4));
#ifndef IMGUI_DISABLE_OBSOLETE_FUNCTIONS
// Obsoleted in 1.82 (from February 2021). This code was stripped/simplified and mostly commented in 1.90 (from September 2023)
// - Legacy Support for hard coded ~0 (used to be a suggested equivalent to ImDrawCornerFlags_All)
if (flags == ~0) { return ImDrawFlags_RoundCornersAll; }
// - Legacy Support for hard coded 0x01 to 0x0F (matching 15 out of 16 old flags combinations). Read details in older version of this code.
if (flags >= 0x01 && flags <= 0x0F) { return (flags << 4); }
// We cannot support hard coded 0x00 with 'float rounding > 0.0f' --> replace with ImDrawFlags_RoundCornersNone or use 'float rounding = 0.0f'
#endif
*/
// If this assert triggers, please update your code replacing hardcoded values with new ImDrawFlags_RoundCorners* values.
// Note that ImDrawFlags_Closed (== 0x01) is an invalid flag for AddRect(), AddRectFilled(), PathRect() etc. anyway.
// See details in 1.82 Changelog as well as 2021/03/12 and 2023/09/08 entries in "API BREAKING CHANGES" section.
IM_ASSERT((flags & 0x0F) == 0 && "Misuse of legacy hardcoded ImDrawCornerFlags values!");
if ((flags & ImDrawFlags_RoundCornersMask_) == 0)
flags |= ImDrawFlags_RoundCornersAll;
return flags;
}
void ImDrawList::PathRect(const ImVec2& a, const ImVec2& b, float rounding, ImDrawFlags flags)
{
if (rounding >= 0.5f)
{
flags = FixRectCornerFlags(flags);
rounding = ImMin(rounding, ImFabs(b.x - a.x) * (((flags & ImDrawFlags_RoundCornersTop) == ImDrawFlags_RoundCornersTop) || ((flags & ImDrawFlags_RoundCornersBottom) == ImDrawFlags_RoundCornersBottom) ? 0.5f : 1.0f) - 1.0f);
rounding = ImMin(rounding, ImFabs(b.y - a.y) * (((flags & ImDrawFlags_RoundCornersLeft) == ImDrawFlags_RoundCornersLeft) || ((flags & ImDrawFlags_RoundCornersRight) == ImDrawFlags_RoundCornersRight) ? 0.5f : 1.0f) - 1.0f);
}
if (rounding < 0.5f || (flags & ImDrawFlags_RoundCornersMask_) == ImDrawFlags_RoundCornersNone)
{
PathLineTo(a);
PathLineTo(ImVec2(b.x, a.y));
PathLineTo(b);
PathLineTo(ImVec2(a.x, b.y));
}
else
{
const float rounding_tl = (flags & ImDrawFlags_RoundCornersTopLeft) ? rounding : 0.0f;
const float rounding_tr = (flags & ImDrawFlags_RoundCornersTopRight) ? rounding : 0.0f;
const float rounding_br = (flags & ImDrawFlags_RoundCornersBottomRight) ? rounding : 0.0f;
const float rounding_bl = (flags & ImDrawFlags_RoundCornersBottomLeft) ? rounding : 0.0f;
PathArcToFast(ImVec2(a.x + rounding_tl, a.y + rounding_tl), rounding_tl, 6, 9);
PathArcToFast(ImVec2(b.x - rounding_tr, a.y + rounding_tr), rounding_tr, 9, 12);
PathArcToFast(ImVec2(b.x - rounding_br, b.y - rounding_br), rounding_br, 0, 3);
PathArcToFast(ImVec2(a.x + rounding_bl, b.y - rounding_bl), rounding_bl, 3, 6);
}
}
void ImDrawList::AddLine(const ImVec2& p1, const ImVec2& p2, ImU32 col, float thickness)
{
if ((col & IM_COL32_A_MASK) == 0)
return;
PathLineTo(p1 + ImVec2(0.5f, 0.5f));
PathLineTo(p2 + ImVec2(0.5f, 0.5f));
PathStroke(col, 0, thickness);
}
// p_min = upper-left, p_max = lower-right
// Note we don't render 1 pixels sized rectangles properly.
void ImDrawList::AddRect(const ImVec2& p_min, const ImVec2& p_max, ImU32 col, float rounding, ImDrawFlags flags, float thickness)
{
if ((col & IM_COL32_A_MASK) == 0)
return;
if (Flags & ImDrawListFlags_AntiAliasedLines)
PathRect(p_min + ImVec2(0.50f, 0.50f), p_max - ImVec2(0.50f, 0.50f), rounding, flags);
else
PathRect(p_min + ImVec2(0.50f, 0.50f), p_max - ImVec2(0.49f, 0.49f), rounding, flags); // Better looking lower-right corner and rounded non-AA shapes.
PathStroke(col, ImDrawFlags_Closed, thickness);
}
void ImDrawList::AddRectFilled(const ImVec2& p_min, const ImVec2& p_max, ImU32 col, float rounding, ImDrawFlags flags)
{
if ((col & IM_COL32_A_MASK) == 0)
return;
if (rounding < 0.5f || (flags & ImDrawFlags_RoundCornersMask_) == ImDrawFlags_RoundCornersNone)
{
PrimReserve(6, 4);
PrimRect(p_min, p_max, col);
}
else
{
PathRect(p_min, p_max, rounding, flags);
PathFillConvex(col);
}
}
// p_min = upper-left, p_max = lower-right
void ImDrawList::AddRectFilledMultiColor(const ImVec2& p_min, const ImVec2& p_max, ImU32 col_upr_left, ImU32 col_upr_right, ImU32 col_bot_right, ImU32 col_bot_left)
{
if (((col_upr_left | col_upr_right | col_bot_right | col_bot_left) & IM_COL32_A_MASK) == 0)
return;
const ImVec2 uv = _Data->TexUvWhitePixel;
PrimReserve(6, 4);
PrimWriteIdx((ImDrawIdx)(_VtxCurrentIdx)); PrimWriteIdx((ImDrawIdx)(_VtxCurrentIdx + 1)); PrimWriteIdx((ImDrawIdx)(_VtxCurrentIdx + 2));
PrimWriteIdx((ImDrawIdx)(_VtxCurrentIdx)); PrimWriteIdx((ImDrawIdx)(_VtxCurrentIdx + 2)); PrimWriteIdx((ImDrawIdx)(_VtxCurrentIdx + 3));
PrimWriteVtx(p_min, uv, col_upr_left);
PrimWriteVtx(ImVec2(p_max.x, p_min.y), uv, col_upr_right);
PrimWriteVtx(p_max, uv, col_bot_right);
PrimWriteVtx(ImVec2(p_min.x, p_max.y), uv, col_bot_left);
}
void ImDrawList::AddQuad(const ImVec2& p1, const ImVec2& p2, const ImVec2& p3, const ImVec2& p4, ImU32 col, float thickness)
{
if ((col & IM_COL32_A_MASK) == 0)
return;
PathLineTo(p1);
PathLineTo(p2);
PathLineTo(p3);
PathLineTo(p4);
PathStroke(col, ImDrawFlags_Closed, thickness);
}
void ImDrawList::AddQuadFilled(const ImVec2& p1, const ImVec2& p2, const ImVec2& p3, const ImVec2& p4, ImU32 col)
{
if ((col & IM_COL32_A_MASK) == 0)
return;
PathLineTo(p1);
PathLineTo(p2);
PathLineTo(p3);
PathLineTo(p4);
PathFillConvex(col);
}
void ImDrawList::AddTriangle(const ImVec2& p1, const ImVec2& p2, const ImVec2& p3, ImU32 col, float thickness)
{
if ((col & IM_COL32_A_MASK) == 0)
return;
PathLineTo(p1);
PathLineTo(p2);
PathLineTo(p3);
PathStroke(col, ImDrawFlags_Closed, thickness);
}
void ImDrawList::AddTriangleFilled(const ImVec2& p1, const ImVec2& p2, const ImVec2& p3, ImU32 col)
{
if ((col & IM_COL32_A_MASK) == 0)
return;
PathLineTo(p1);
PathLineTo(p2);
PathLineTo(p3);
PathFillConvex(col);
}
void ImDrawList::AddCircle(const ImVec2& center, float radius, ImU32 col, int num_segments, float thickness)
{
if ((col & IM_COL32_A_MASK) == 0 || radius < 0.5f)
return;
if (num_segments <= 0)
{
// Use arc with automatic segment count
_PathArcToFastEx(center, radius - 0.5f, 0, IM_DRAWLIST_ARCFAST_SAMPLE_MAX, 0);
_Path.Size--;
}
else
{
// Explicit segment count (still clamp to avoid drawing insanely tessellated shapes)
num_segments = ImClamp(num_segments, 3, IM_DRAWLIST_CIRCLE_AUTO_SEGMENT_MAX);
// Because we are filling a closed shape we remove 1 from the count of segments/points
const float a_max = (IM_PI * 2.0f) * ((float)num_segments - 1.0f) / (float)num_segments;
PathArcTo(center, radius - 0.5f, 0.0f, a_max, num_segments - 1);
}
PathStroke(col, ImDrawFlags_Closed, thickness);
}
void ImDrawList::AddCircleFilled(const ImVec2& center, float radius, ImU32 col, int num_segments)
{
if ((col & IM_COL32_A_MASK) == 0 || radius < 0.5f)
return;
if (num_segments <= 0)
{
// Use arc with automatic segment count
_PathArcToFastEx(center, radius, 0, IM_DRAWLIST_ARCFAST_SAMPLE_MAX, 0);
_Path.Size--;
}
else
{
// Explicit segment count (still clamp to avoid drawing insanely tessellated shapes)
num_segments = ImClamp(num_segments, 3, IM_DRAWLIST_CIRCLE_AUTO_SEGMENT_MAX);
// Because we are filling a closed shape we remove 1 from the count of segments/points
const float a_max = (IM_PI * 2.0f) * ((float)num_segments - 1.0f) / (float)num_segments;
PathArcTo(center, radius, 0.0f, a_max, num_segments - 1);
}
PathFillConvex(col);
}
// Guaranteed to honor 'num_segments'
void ImDrawList::AddNgon(const ImVec2& center, float radius, ImU32 col, int num_segments, float thickness)
{
if ((col & IM_COL32_A_MASK) == 0 || num_segments <= 2)
return;
// Because we are filling a closed shape we remove 1 from the count of segments/points
const float a_max = (IM_PI * 2.0f) * ((float)num_segments - 1.0f) / (float)num_segments;
PathArcTo(center, radius - 0.5f, 0.0f, a_max, num_segments - 1);
PathStroke(col, ImDrawFlags_Closed, thickness);
}
// Guaranteed to honor 'num_segments'
void ImDrawList::AddNgonFilled(const ImVec2& center, float radius, ImU32 col, int num_segments)
{
if ((col & IM_COL32_A_MASK) == 0 || num_segments <= 2)
return;
// Because we are filling a closed shape we remove 1 from the count of segments/points
const float a_max = (IM_PI * 2.0f) * ((float)num_segments - 1.0f) / (float)num_segments;
PathArcTo(center, radius, 0.0f, a_max, num_segments - 1);
PathFillConvex(col);
}
// Ellipse
void ImDrawList::AddEllipse(const ImVec2& center, const ImVec2& radius, ImU32 col, float rot, int num_segments, float thickness)
{
if ((col & IM_COL32_A_MASK) == 0)
return;
if (num_segments <= 0)
num_segments = _CalcCircleAutoSegmentCount(ImMax(radius.x, radius.y)); // A bit pessimistic, maybe there's a better computation to do here.
// Because we are filling a closed shape we remove 1 from the count of segments/points
const float a_max = IM_PI * 2.0f * ((float)num_segments - 1.0f) / (float)num_segments;
PathEllipticalArcTo(center, radius, rot, 0.0f, a_max, num_segments - 1);
PathStroke(col, true, thickness);
}
void ImDrawList::AddEllipseFilled(const ImVec2& center, const ImVec2& radius, ImU32 col, float rot, int num_segments)
{
if ((col & IM_COL32_A_MASK) == 0)
return;
if (num_segments <= 0)
num_segments = _CalcCircleAutoSegmentCount(ImMax(radius.x, radius.y)); // A bit pessimistic, maybe there's a better computation to do here.
// Because we are filling a closed shape we remove 1 from the count of segments/points
const float a_max = IM_PI * 2.0f * ((float)num_segments - 1.0f) / (float)num_segments;
PathEllipticalArcTo(center, radius, rot, 0.0f, a_max, num_segments - 1);
PathFillConvex(col);
}
// Cubic Bezier takes 4 controls points
void ImDrawList::AddBezierCubic(const ImVec2& p1, const ImVec2& p2, const ImVec2& p3, const ImVec2& p4, ImU32 col, float thickness, int num_segments)
{
if ((col & IM_COL32_A_MASK) == 0)
return;
PathLineTo(p1);
PathBezierCubicCurveTo(p2, p3, p4, num_segments);
PathStroke(col, 0, thickness);
}
// Quadratic Bezier takes 3 controls points
void ImDrawList::AddBezierQuadratic(const ImVec2& p1, const ImVec2& p2, const ImVec2& p3, ImU32 col, float thickness, int num_segments)
{
if ((col & IM_COL32_A_MASK) == 0)
return;
PathLineTo(p1);
PathBezierQuadraticCurveTo(p2, p3, num_segments);
PathStroke(col, 0, thickness);
}
void ImDrawList::AddText(const ImFont* font, float font_size, const ImVec2& pos, ImU32 col, const char* text_begin, const char* text_end, float wrap_width, const ImVec4* cpu_fine_clip_rect)
{
if ((col & IM_COL32_A_MASK) == 0)
return;
// Accept null ranges
if (text_begin == text_end || text_begin[0] == 0)
return;
if (text_end == NULL)
text_end = text_begin + strlen(text_begin);
// Pull default font/size from the shared ImDrawListSharedData instance
if (font == NULL)
font = _Data->Font;
if (font_size == 0.0f)
font_size = _Data->FontSize;
IM_ASSERT(font->ContainerAtlas->TexID == _CmdHeader.TextureId); // Use high-level ImGui::PushFont() or low-level ImDrawList::PushTextureId() to change font.
ImVec4 clip_rect = _CmdHeader.ClipRect;
if (cpu_fine_clip_rect)
{
clip_rect.x = ImMax(clip_rect.x, cpu_fine_clip_rect->x);
clip_rect.y = ImMax(clip_rect.y, cpu_fine_clip_rect->y);
clip_rect.z = ImMin(clip_rect.z, cpu_fine_clip_rect->z);
clip_rect.w = ImMin(clip_rect.w, cpu_fine_clip_rect->w);
}
font->RenderText(this, font_size, pos, col, clip_rect, text_begin, text_end, wrap_width, cpu_fine_clip_rect != NULL);
}
void ImDrawList::AddText(const ImVec2& pos, ImU32 col, const char* text_begin, const char* text_end)
{
AddText(NULL, 0.0f, pos, col, text_begin, text_end);
}
void ImDrawList::AddImage(ImTextureID user_texture_id, const ImVec2& p_min, const ImVec2& p_max, const ImVec2& uv_min, const ImVec2& uv_max, ImU32 col)
{
if ((col & IM_COL32_A_MASK) == 0)
return;
const bool push_texture_id = user_texture_id != _CmdHeader.TextureId;
if (push_texture_id)
PushTextureID(user_texture_id);
PrimReserve(6, 4);
PrimRectUV(p_min, p_max, uv_min, uv_max, col);
if (push_texture_id)
PopTextureID();
}
void ImDrawList::AddImageQuad(ImTextureID user_texture_id, const ImVec2& p1, const ImVec2& p2, const ImVec2& p3, const ImVec2& p4, const ImVec2& uv1, const ImVec2& uv2, const ImVec2& uv3, const ImVec2& uv4, ImU32 col)
{
if ((col & IM_COL32_A_MASK) == 0)
return;
const bool push_texture_id = user_texture_id != _CmdHeader.TextureId;
if (push_texture_id)
PushTextureID(user_texture_id);
PrimReserve(6, 4);
PrimQuadUV(p1, p2, p3, p4, uv1, uv2, uv3, uv4, col);
if (push_texture_id)
PopTextureID();
}
void ImDrawList::AddImageRounded(ImTextureID user_texture_id, const ImVec2& p_min, const ImVec2& p_max, const ImVec2& uv_min, const ImVec2& uv_max, ImU32 col, float rounding, ImDrawFlags flags)
{
if ((col & IM_COL32_A_MASK) == 0)
return;
flags = FixRectCornerFlags(flags);
if (rounding < 0.5f || (flags & ImDrawFlags_RoundCornersMask_) == ImDrawFlags_RoundCornersNone)
{
AddImage(user_texture_id, p_min, p_max, uv_min, uv_max, col);
return;
}
const bool push_texture_id = user_texture_id != _CmdHeader.TextureId;
if (push_texture_id)
PushTextureID(user_texture_id);
int vert_start_idx = VtxBuffer.Size;
PathRect(p_min, p_max, rounding, flags);
PathFillConvex(col);
int vert_end_idx = VtxBuffer.Size;
ImGui::ShadeVertsLinearUV(this, vert_start_idx, vert_end_idx, p_min, p_max, uv_min, uv_max, true);
if (push_texture_id)
PopTextureID();
}
//-----------------------------------------------------------------------------
// [SECTION] ImTriangulator, ImDrawList concave polygon fill
//-----------------------------------------------------------------------------
// Triangulate concave polygons. Based on "Triangulation by Ear Clipping" paper, O(N^2) complexity.
// Reference: https://www.geometrictools.com/Documentation/TriangulationByEarClipping.pdf
// Provided as a convenience for user but not used by main library.
//-----------------------------------------------------------------------------
// - ImTriangulator [Internal]
// - AddConcavePolyFilled()
//-----------------------------------------------------------------------------
enum ImTriangulatorNodeType
{
ImTriangulatorNodeType_Convex,
ImTriangulatorNodeType_Ear,
ImTriangulatorNodeType_Reflex
};
struct ImTriangulatorNode
{
ImTriangulatorNodeType Type;
int Index;
ImVec2 Pos;
ImTriangulatorNode* Next;
ImTriangulatorNode* Prev;
void Unlink() { Next->Prev = Prev; Prev->Next = Next; }
};
struct ImTriangulatorNodeSpan
{
ImTriangulatorNode** Data = NULL;
int Size = 0;
void push_back(ImTriangulatorNode* node) { Data[Size++] = node; }
void find_erase_unsorted(int idx) { for (int i = Size - 1; i >= 0; i--) if (Data[i]->Index == idx) { Data[i] = Data[Size - 1]; Size--; return; } }
};
struct ImTriangulator
{
static int EstimateTriangleCount(int points_count) { return (points_count < 3) ? 0 : points_count - 2; }
static int EstimateScratchBufferSize(int points_count) { return sizeof(ImTriangulatorNode) * points_count + sizeof(ImTriangulatorNode*) * points_count * 2; }
void Init(const ImVec2* points, int points_count, void* scratch_buffer);
void GetNextTriangle(unsigned int out_triangle[3]); // Return relative indexes for next triangle
// Internal functions
void BuildNodes(const ImVec2* points, int points_count);
void BuildReflexes();
void BuildEars();
void FlipNodeList();
bool IsEar(int i0, int i1, int i2, const ImVec2& v0, const ImVec2& v1, const ImVec2& v2) const;
void ReclassifyNode(ImTriangulatorNode* node);
// Internal members
int _TrianglesLeft = 0;
ImTriangulatorNode* _Nodes = NULL;
ImTriangulatorNodeSpan _Ears;
ImTriangulatorNodeSpan _Reflexes;
};
// Distribute storage for nodes, ears and reflexes.
// FIXME-OPT: if everything is convex, we could report it to caller and let it switch to an convex renderer
// (this would require first building reflexes to bail to convex if empty, without even building nodes)
void ImTriangulator::Init(const ImVec2* points, int points_count, void* scratch_buffer)
{
IM_ASSERT(scratch_buffer != NULL && points_count >= 3);
_TrianglesLeft = EstimateTriangleCount(points_count);
_Nodes = (ImTriangulatorNode*)scratch_buffer; // points_count x Node
_Ears.Data = (ImTriangulatorNode**)(_Nodes + points_count); // points_count x Node*
_Reflexes.Data = (ImTriangulatorNode**)(_Nodes + points_count) + points_count; // points_count x Node*
BuildNodes(points, points_count);
BuildReflexes();
BuildEars();
}
void ImTriangulator::BuildNodes(const ImVec2* points, int points_count)
{
for (int i = 0; i < points_count; i++)
{
_Nodes[i].Type = ImTriangulatorNodeType_Convex;
_Nodes[i].Index = i;
_Nodes[i].Pos = points[i];
_Nodes[i].Next = _Nodes + i + 1;
_Nodes[i].Prev = _Nodes + i - 1;
}
_Nodes[0].Prev = _Nodes + points_count - 1;
_Nodes[points_count - 1].Next = _Nodes;
}
void ImTriangulator::BuildReflexes()
{
ImTriangulatorNode* n1 = _Nodes;
for (int i = _TrianglesLeft; i >= 0; i--, n1 = n1->Next)
{
if (ImTriangleIsClockwise(n1->Prev->Pos, n1->Pos, n1->Next->Pos))
continue;
n1->Type = ImTriangulatorNodeType_Reflex;
_Reflexes.push_back(n1);
}
}
void ImTriangulator::BuildEars()
{
ImTriangulatorNode* n1 = _Nodes;
for (int i = _TrianglesLeft; i >= 0; i--, n1 = n1->Next)
{
if (n1->Type != ImTriangulatorNodeType_Convex)
continue;
if (!IsEar(n1->Prev->Index, n1->Index, n1->Next->Index, n1->Prev->Pos, n1->Pos, n1->Next->Pos))
continue;
n1->Type = ImTriangulatorNodeType_Ear;
_Ears.push_back(n1);
}
}
void ImTriangulator::GetNextTriangle(unsigned int out_triangle[3])
{
if (_Ears.Size == 0)
{
FlipNodeList();
ImTriangulatorNode* node = _Nodes;
for (int i = _TrianglesLeft; i >= 0; i--, node = node->Next)
node->Type = ImTriangulatorNodeType_Convex;
_Reflexes.Size = 0;
BuildReflexes();
BuildEars();
// If we still don't have ears, it means geometry is degenerated.
if (_Ears.Size == 0)
{
// Return first triangle available, mimicking the behavior of convex fill.
IM_ASSERT(_TrianglesLeft > 0); // Geometry is degenerated
_Ears.Data[0] = _Nodes;
_Ears.Size = 1;
}
}
ImTriangulatorNode* ear = _Ears.Data[--_Ears.Size];
out_triangle[0] = ear->Prev->Index;
out_triangle[1] = ear->Index;
out_triangle[2] = ear->Next->Index;
ear->Unlink();
if (ear == _Nodes)
_Nodes = ear->Next;
ReclassifyNode(ear->Prev);
ReclassifyNode(ear->Next);
_TrianglesLeft--;
}
void ImTriangulator::FlipNodeList()
{
ImTriangulatorNode* prev = _Nodes;
ImTriangulatorNode* temp = _Nodes;
ImTriangulatorNode* current = _Nodes->Next;
prev->Next = prev;
prev->Prev = prev;
while (current != _Nodes)
{
temp = current->Next;
current->Next = prev;
prev->Prev = current;
_Nodes->Next = current;
current->Prev = _Nodes;
prev = current;
current = temp;
}
_Nodes = prev;
}
// A triangle is an ear is no other vertex is inside it. We can test reflexes vertices only (see reference algorithm)
bool ImTriangulator::IsEar(int i0, int i1, int i2, const ImVec2& v0, const ImVec2& v1, const ImVec2& v2) const
{
ImTriangulatorNode** p_end = _Reflexes.Data + _Reflexes.Size;
for (ImTriangulatorNode** p = _Reflexes.Data; p < p_end; p++)
{
ImTriangulatorNode* reflex = *p;
if (reflex->Index != i0 && reflex->Index != i1 && reflex->Index != i2)
if (ImTriangleContainsPoint(v0, v1, v2, reflex->Pos))
return false;
}
return true;
}
void ImTriangulator::ReclassifyNode(ImTriangulatorNode* n1)
{
// Classify node
ImTriangulatorNodeType type;
const ImTriangulatorNode* n0 = n1->Prev;
const ImTriangulatorNode* n2 = n1->Next;
if (!ImTriangleIsClockwise(n0->Pos, n1->Pos, n2->Pos))
type = ImTriangulatorNodeType_Reflex;
else if (IsEar(n0->Index, n1->Index, n2->Index, n0->Pos, n1->Pos, n2->Pos))
type = ImTriangulatorNodeType_Ear;
else
type = ImTriangulatorNodeType_Convex;
// Update lists when a type changes
if (type == n1->Type)
return;
if (n1->Type == ImTriangulatorNodeType_Reflex)
_Reflexes.find_erase_unsorted(n1->Index);
else if (n1->Type == ImTriangulatorNodeType_Ear)
_Ears.find_erase_unsorted(n1->Index);
if (type == ImTriangulatorNodeType_Reflex)
_Reflexes.push_back(n1);
else if (type == ImTriangulatorNodeType_Ear)
_Ears.push_back(n1);
n1->Type = type;
}
// Use ear-clipping algorithm to triangulate a simple polygon (no self-interaction, no holes).
// (Reminder: we don't perform any coarse clipping/culling in ImDrawList layer!
// It is up to caller to ensure not making costly calls that will be outside of visible area.
// As concave fill is noticeably more expensive than other primitives, be mindful of this...
// Caller can build AABB of points, and avoid filling if 'draw_list->_CmdHeader.ClipRect.Overlays(points_bb) == false')
void ImDrawList::AddConcavePolyFilled(const ImVec2* points, const int points_count, ImU32 col)
{
if (points_count < 3 || (col & IM_COL32_A_MASK) == 0)
return;
const ImVec2 uv = _Data->TexUvWhitePixel;
ImTriangulator triangulator;
unsigned int triangle[3];
if (Flags & ImDrawListFlags_AntiAliasedFill)
{
// Anti-aliased Fill
const float AA_SIZE = _FringeScale;
const ImU32 col_trans = col & ~IM_COL32_A_MASK;
const int idx_count = (points_count - 2) * 3 + points_count * 6;
const int vtx_count = (points_count * 2);
PrimReserve(idx_count, vtx_count);
// Add indexes for fill
unsigned int vtx_inner_idx = _VtxCurrentIdx;
unsigned int vtx_outer_idx = _VtxCurrentIdx + 1;
_Data->TempBuffer.reserve_discard((ImTriangulator::EstimateScratchBufferSize(points_count) + sizeof(ImVec2)) / sizeof(ImVec2));
triangulator.Init(points, points_count, _Data->TempBuffer.Data);
while (triangulator._TrianglesLeft > 0)
{
triangulator.GetNextTriangle(triangle);
_IdxWritePtr[0] = (ImDrawIdx)(vtx_inner_idx + (triangle[0] << 1)); _IdxWritePtr[1] = (ImDrawIdx)(vtx_inner_idx + (triangle[1] << 1)); _IdxWritePtr[2] = (ImDrawIdx)(vtx_inner_idx + (triangle[2] << 1));
_IdxWritePtr += 3;
}
// Compute normals
_Data->TempBuffer.reserve_discard(points_count);
ImVec2* temp_normals = _Data->TempBuffer.Data;
for (int i0 = points_count - 1, i1 = 0; i1 < points_count; i0 = i1++)
{
const ImVec2& p0 = points[i0];
const ImVec2& p1 = points[i1];
float dx = p1.x - p0.x;
float dy = p1.y - p0.y;
IM_NORMALIZE2F_OVER_ZERO(dx, dy);
temp_normals[i0].x = dy;
temp_normals[i0].y = -dx;
}
for (int i0 = points_count - 1, i1 = 0; i1 < points_count; i0 = i1++)
{
// Average normals
const ImVec2& n0 = temp_normals[i0];
const ImVec2& n1 = temp_normals[i1];
float dm_x = (n0.x + n1.x) * 0.5f;
float dm_y = (n0.y + n1.y) * 0.5f;
IM_FIXNORMAL2F(dm_x, dm_y);
dm_x *= AA_SIZE * 0.5f;
dm_y *= AA_SIZE * 0.5f;
// Add vertices
_VtxWritePtr[0].pos.x = (points[i1].x - dm_x); _VtxWritePtr[0].pos.y = (points[i1].y - dm_y); _VtxWritePtr[0].uv = uv; _VtxWritePtr[0].col = col; // Inner
_VtxWritePtr[1].pos.x = (points[i1].x + dm_x); _VtxWritePtr[1].pos.y = (points[i1].y + dm_y); _VtxWritePtr[1].uv = uv; _VtxWritePtr[1].col = col_trans; // Outer
_VtxWritePtr += 2;
// Add indexes for fringes
_IdxWritePtr[0] = (ImDrawIdx)(vtx_inner_idx + (i1 << 1)); _IdxWritePtr[1] = (ImDrawIdx)(vtx_inner_idx + (i0 << 1)); _IdxWritePtr[2] = (ImDrawIdx)(vtx_outer_idx + (i0 << 1));
_IdxWritePtr[3] = (ImDrawIdx)(vtx_outer_idx + (i0 << 1)); _IdxWritePtr[4] = (ImDrawIdx)(vtx_outer_idx + (i1 << 1)); _IdxWritePtr[5] = (ImDrawIdx)(vtx_inner_idx + (i1 << 1));
_IdxWritePtr += 6;
}
_VtxCurrentIdx += (ImDrawIdx)vtx_count;
}
else
{
// Non Anti-aliased Fill
const int idx_count = (points_count - 2) * 3;
const int vtx_count = points_count;
PrimReserve(idx_count, vtx_count);
for (int i = 0; i < vtx_count; i++)
{
_VtxWritePtr[0].pos = points[i]; _VtxWritePtr[0].uv = uv; _VtxWritePtr[0].col = col;
_VtxWritePtr++;
}
_Data->TempBuffer.reserve_discard((ImTriangulator::EstimateScratchBufferSize(points_count) + sizeof(ImVec2)) / sizeof(ImVec2));
triangulator.Init(points, points_count, _Data->TempBuffer.Data);
while (triangulator._TrianglesLeft > 0)
{
triangulator.GetNextTriangle(triangle);
_IdxWritePtr[0] = (ImDrawIdx)(_VtxCurrentIdx + triangle[0]); _IdxWritePtr[1] = (ImDrawIdx)(_VtxCurrentIdx + triangle[1]); _IdxWritePtr[2] = (ImDrawIdx)(_VtxCurrentIdx + triangle[2]);
_IdxWritePtr += 3;
}
_VtxCurrentIdx += (ImDrawIdx)vtx_count;
}
}
//-----------------------------------------------------------------------------
// [SECTION] ImDrawListSplitter
//-----------------------------------------------------------------------------
// FIXME: This may be a little confusing, trying to be a little too low-level/optimal instead of just doing vector swap..
//-----------------------------------------------------------------------------
void ImDrawListSplitter::ClearFreeMemory()
{
for (int i = 0; i < _Channels.Size; i++)
{
if (i == _Current)
memset(&_Channels[i], 0, sizeof(_Channels[i])); // Current channel is a copy of CmdBuffer/IdxBuffer, don't destruct again
_Channels[i]._CmdBuffer.clear();
_Channels[i]._IdxBuffer.clear();
}
_Current = 0;
_Count = 1;
_Channels.clear();
}
void ImDrawListSplitter::Split(ImDrawList* draw_list, int channels_count)
{
IM_UNUSED(draw_list);
IM_ASSERT(_Current == 0 && _Count <= 1 && "Nested channel splitting is not supported. Please use separate instances of ImDrawListSplitter.");
int old_channels_count = _Channels.Size;
if (old_channels_count < channels_count)
{
_Channels.reserve(channels_count); // Avoid over reserving since this is likely to stay stable
_Channels.resize(channels_count);
}
_Count = channels_count;
// Channels[] (24/32 bytes each) hold storage that we'll swap with draw_list->_CmdBuffer/_IdxBuffer
// The content of Channels[0] at this point doesn't matter. We clear it to make state tidy in a debugger but we don't strictly need to.
// When we switch to the next channel, we'll copy draw_list->_CmdBuffer/_IdxBuffer into Channels[0] and then Channels[1] into draw_list->CmdBuffer/_IdxBuffer
memset(&_Channels[0], 0, sizeof(ImDrawChannel));
for (int i = 1; i < channels_count; i++)
{
if (i >= old_channels_count)
{
IM_PLACEMENT_NEW(&_Channels[i]) ImDrawChannel();
}
else
{
_Channels[i]._CmdBuffer.resize(0);
_Channels[i]._IdxBuffer.resize(0);
}
}
}
void ImDrawListSplitter::Merge(ImDrawList* draw_list)
{
// Note that we never use or rely on _Channels.Size because it is merely a buffer that we never shrink back to 0 to keep all sub-buffers ready for use.
if (_Count <= 1)
return;
SetCurrentChannel(draw_list, 0);
draw_list->_PopUnusedDrawCmd();
// Calculate our final buffer sizes. Also fix the incorrect IdxOffset values in each command.
int new_cmd_buffer_count = 0;
int new_idx_buffer_count = 0;
ImDrawCmd* last_cmd = (_Count > 0 && draw_list->CmdBuffer.Size > 0) ? &draw_list->CmdBuffer.back() : NULL;
int idx_offset = last_cmd ? last_cmd->IdxOffset + last_cmd->ElemCount : 0;
for (int i = 1; i < _Count; i++)
{
ImDrawChannel& ch = _Channels[i];
if (ch._CmdBuffer.Size > 0 && ch._CmdBuffer.back().ElemCount == 0 && ch._CmdBuffer.back().UserCallback == NULL) // Equivalent of PopUnusedDrawCmd()
ch._CmdBuffer.pop_back();
if (ch._CmdBuffer.Size > 0 && last_cmd != NULL)
{
// Do not include ImDrawCmd_AreSequentialIdxOffset() in the compare as we rebuild IdxOffset values ourselves.
// Manipulating IdxOffset (e.g. by reordering draw commands like done by RenderDimmedBackgroundBehindWindow()) is not supported within a splitter.
ImDrawCmd* next_cmd = &ch._CmdBuffer[0];
if (ImDrawCmd_HeaderCompare(last_cmd, next_cmd) == 0 && last_cmd->UserCallback == NULL && next_cmd->UserCallback == NULL)
{
// Merge previous channel last draw command with current channel first draw command if matching.
last_cmd->ElemCount += next_cmd->ElemCount;
idx_offset += next_cmd->ElemCount;
ch._CmdBuffer.erase(ch._CmdBuffer.Data); // FIXME-OPT: Improve for multiple merges.
}
}
if (ch._CmdBuffer.Size > 0)
last_cmd = &ch._CmdBuffer.back();
new_cmd_buffer_count += ch._CmdBuffer.Size;
new_idx_buffer_count += ch._IdxBuffer.Size;
for (int cmd_n = 0; cmd_n < ch._CmdBuffer.Size; cmd_n++)
{
ch._CmdBuffer.Data[cmd_n].IdxOffset = idx_offset;
idx_offset += ch._CmdBuffer.Data[cmd_n].ElemCount;
}
}
draw_list->CmdBuffer.resize(draw_list->CmdBuffer.Size + new_cmd_buffer_count);
draw_list->IdxBuffer.resize(draw_list->IdxBuffer.Size + new_idx_buffer_count);
// Write commands and indices in order (they are fairly small structures, we don't copy vertices only indices)
ImDrawCmd* cmd_write = draw_list->CmdBuffer.Data + draw_list->CmdBuffer.Size - new_cmd_buffer_count;
ImDrawIdx* idx_write = draw_list->IdxBuffer.Data + draw_list->IdxBuffer.Size - new_idx_buffer_count;
for (int i = 1; i < _Count; i++)
{
ImDrawChannel& ch = _Channels[i];
if (int sz = ch._CmdBuffer.Size) { memcpy(cmd_write, ch._CmdBuffer.Data, sz * sizeof(ImDrawCmd)); cmd_write += sz; }
if (int sz = ch._IdxBuffer.Size) { memcpy(idx_write, ch._IdxBuffer.Data, sz * sizeof(ImDrawIdx)); idx_write += sz; }
}
draw_list->_IdxWritePtr = idx_write;
// Ensure there's always a non-callback draw command trailing the command-buffer
if (draw_list->CmdBuffer.Size == 0 || draw_list->CmdBuffer.back().UserCallback != NULL)
draw_list->AddDrawCmd();
// If current command is used with different settings we need to add a new command
ImDrawCmd* curr_cmd = &draw_list->CmdBuffer.Data[draw_list->CmdBuffer.Size - 1];
if (curr_cmd->ElemCount == 0)
ImDrawCmd_HeaderCopy(curr_cmd, &draw_list->_CmdHeader); // Copy ClipRect, TextureId, VtxOffset
else if (ImDrawCmd_HeaderCompare(curr_cmd, &draw_list->_CmdHeader) != 0)
draw_list->AddDrawCmd();
_Count = 1;
}
void ImDrawListSplitter::SetCurrentChannel(ImDrawList* draw_list, int idx)
{
IM_ASSERT(idx >= 0 && idx < _Count);
if (_Current == idx)
return;
// Overwrite ImVector (12/16 bytes), four times. This is merely a silly optimization instead of doing .swap()
memcpy(&_Channels.Data[_Current]._CmdBuffer, &draw_list->CmdBuffer, sizeof(draw_list->CmdBuffer));
memcpy(&_Channels.Data[_Current]._IdxBuffer, &draw_list->IdxBuffer, sizeof(draw_list->IdxBuffer));
_Current = idx;
memcpy(&draw_list->CmdBuffer, &_Channels.Data[idx]._CmdBuffer, sizeof(draw_list->CmdBuffer));
memcpy(&draw_list->IdxBuffer, &_Channels.Data[idx]._IdxBuffer, sizeof(draw_list->IdxBuffer));
draw_list->_IdxWritePtr = draw_list->IdxBuffer.Data + draw_list->IdxBuffer.Size;
// If current command is used with different settings we need to add a new command
ImDrawCmd* curr_cmd = (draw_list->CmdBuffer.Size == 0) ? NULL : &draw_list->CmdBuffer.Data[draw_list->CmdBuffer.Size - 1];
if (curr_cmd == NULL)
draw_list->AddDrawCmd();
else if (curr_cmd->ElemCount == 0)
ImDrawCmd_HeaderCopy(curr_cmd, &draw_list->_CmdHeader); // Copy ClipRect, TextureId, VtxOffset
else if (ImDrawCmd_HeaderCompare(curr_cmd, &draw_list->_CmdHeader) != 0)
draw_list->AddDrawCmd();
}
//-----------------------------------------------------------------------------
// [SECTION] ImDrawData
//-----------------------------------------------------------------------------
void ImDrawData::Clear()
{
Valid = false;
CmdListsCount = TotalIdxCount = TotalVtxCount = 0;
CmdLists.resize(0); // The ImDrawList are NOT owned by ImDrawData but e.g. by ImGuiContext, so we don't clear them.
DisplayPos = DisplaySize = FramebufferScale = ImVec2(0.0f, 0.0f);