| /* |
| Simple DirectMedia Layer |
| Copyright (C) 1997-2020 Sam Lantinga <slouken@libsdl.org> |
| |
| This software is provided 'as-is', without any express or implied |
| warranty. In no event will the authors be held liable for any damages |
| arising from the use of this software. |
| |
| Permission is granted to anyone to use this software for any purpose, |
| including commercial applications, and to alter it and redistribute it |
| freely, subject to the following restrictions: |
| |
| 1. The origin of this software must not be misrepresented; you must not |
| claim that you wrote the original software. If you use this software |
| in a product, an acknowledgment in the product documentation would be |
| appreciated but is not required. |
| 2. Altered source versions must be plainly marked as such, and must not be |
| misrepresented as being the original software. |
| 3. This notice may not be removed or altered from any source distribution. |
| */ |
| #include "../SDL_internal.h" |
| |
| /* |
| Code to load and save surfaces in Windows BMP format. |
| |
| Why support BMP format? Well, it's a native format for Windows, and |
| most image processing programs can read and write it. It would be nice |
| to be able to have at least one image format that we can natively load |
| and save, and since PNG is so complex that it would bloat the library, |
| BMP is a good alternative. |
| |
| This code currently supports Win32 DIBs in uncompressed 8 and 24 bpp. |
| */ |
| |
| #include "SDL_hints.h" |
| #include "SDL_video.h" |
| #include "SDL_assert.h" |
| #include "SDL_endian.h" |
| #include "SDL_pixels_c.h" |
| |
| #define SAVE_32BIT_BMP |
| |
| /* Compression encodings for BMP files */ |
| #ifndef BI_RGB |
| #define BI_RGB 0 |
| #define BI_RLE8 1 |
| #define BI_RLE4 2 |
| #define BI_BITFIELDS 3 |
| #endif |
| |
| /* Logical color space values for BMP files */ |
| #ifndef LCS_WINDOWS_COLOR_SPACE |
| /* 0x57696E20 == "Win " */ |
| #define LCS_WINDOWS_COLOR_SPACE 0x57696E20 |
| #endif |
| |
| static int readRlePixels(SDL_Surface * surface, SDL_RWops * src, int isRle8) |
| { |
| /* |
| | Sets the surface pixels from src. A bmp image is upside down. |
| */ |
| int pitch = surface->pitch; |
| int height = surface->h; |
| Uint8 *start = (Uint8 *)surface->pixels; |
| Uint8 *end = start + (height*pitch); |
| Uint8 *bits = end-pitch, *spot; |
| int ofs = 0; |
| Uint8 ch; |
| Uint8 needsPad; |
| |
| #define COPY_PIXEL(x) spot = &bits[ofs++]; if(spot >= start && spot < end) *spot = (x) |
| |
| for (;;) { |
| if (!SDL_RWread(src, &ch, 1, 1)) return 1; |
| /* |
| | encoded mode starts with a run length, and then a byte |
| | with two colour indexes to alternate between for the run |
| */ |
| if (ch) { |
| Uint8 pixel; |
| if (!SDL_RWread(src, &pixel, 1, 1)) return 1; |
| if (isRle8) { /* 256-color bitmap, compressed */ |
| do { |
| COPY_PIXEL(pixel); |
| } while (--ch); |
| } else { /* 16-color bitmap, compressed */ |
| Uint8 pixel0 = pixel >> 4; |
| Uint8 pixel1 = pixel & 0x0F; |
| for (;;) { |
| COPY_PIXEL(pixel0); /* even count, high nibble */ |
| if (!--ch) break; |
| COPY_PIXEL(pixel1); /* odd count, low nibble */ |
| if (!--ch) break; |
| } |
| } |
| } else { |
| /* |
| | A leading zero is an escape; it may signal the end of the bitmap, |
| | a cursor move, or some absolute data. |
| | zero tag may be absolute mode or an escape |
| */ |
| if (!SDL_RWread(src, &ch, 1, 1)) return 1; |
| switch (ch) { |
| case 0: /* end of line */ |
| ofs = 0; |
| bits -= pitch; /* go to previous */ |
| break; |
| case 1: /* end of bitmap */ |
| return 0; /* success! */ |
| case 2: /* delta */ |
| if (!SDL_RWread(src, &ch, 1, 1)) return 1; |
| ofs += ch; |
| if (!SDL_RWread(src, &ch, 1, 1)) return 1; |
| bits -= (ch * pitch); |
| break; |
| default: /* no compression */ |
| if (isRle8) { |
| needsPad = (ch & 1); |
| do { |
| Uint8 pixel; |
| if (!SDL_RWread(src, &pixel, 1, 1)) return 1; |
| COPY_PIXEL(pixel); |
| } while (--ch); |
| } else { |
| needsPad = (((ch+1)>>1) & 1); /* (ch+1)>>1: bytes size */ |
| for (;;) { |
| Uint8 pixel; |
| if (!SDL_RWread(src, &pixel, 1, 1)) return 1; |
| COPY_PIXEL(pixel >> 4); |
| if (!--ch) break; |
| COPY_PIXEL(pixel & 0x0F); |
| if (!--ch) break; |
| } |
| } |
| /* pad at even boundary */ |
| if (needsPad && !SDL_RWread(src, &ch, 1, 1)) return 1; |
| break; |
| } |
| } |
| } |
| } |
| |
| static void CorrectAlphaChannel(SDL_Surface *surface) |
| { |
| /* Check to see if there is any alpha channel data */ |
| SDL_bool hasAlpha = SDL_FALSE; |
| #if SDL_BYTEORDER == SDL_BIG_ENDIAN |
| int alphaChannelOffset = 0; |
| #else |
| int alphaChannelOffset = 3; |
| #endif |
| Uint8 *alpha = ((Uint8*)surface->pixels) + alphaChannelOffset; |
| Uint8 *end = alpha + surface->h * surface->pitch; |
| |
| while (alpha < end) { |
| if (*alpha != 0) { |
| hasAlpha = SDL_TRUE; |
| break; |
| } |
| alpha += 4; |
| } |
| |
| if (!hasAlpha) { |
| alpha = ((Uint8*)surface->pixels) + alphaChannelOffset; |
| while (alpha < end) { |
| *alpha = SDL_ALPHA_OPAQUE; |
| alpha += 4; |
| } |
| } |
| } |
| |
| SDL_Surface * |
| SDL_LoadBMP_RW(SDL_RWops * src, int freesrc) |
| { |
| SDL_bool was_error; |
| Sint64 fp_offset = 0; |
| int bmpPitch; |
| int i, pad; |
| SDL_Surface *surface; |
| Uint32 Rmask = 0; |
| Uint32 Gmask = 0; |
| Uint32 Bmask = 0; |
| Uint32 Amask = 0; |
| SDL_Palette *palette; |
| Uint8 *bits; |
| Uint8 *top, *end; |
| SDL_bool topDown; |
| int ExpandBMP; |
| SDL_bool haveRGBMasks = SDL_FALSE; |
| SDL_bool haveAlphaMask = SDL_FALSE; |
| SDL_bool correctAlpha = SDL_FALSE; |
| |
| /* The Win32 BMP file header (14 bytes) */ |
| char magic[2]; |
| /* Uint32 bfSize; */ |
| /* Uint16 bfReserved1; */ |
| /* Uint16 bfReserved2; */ |
| Uint32 bfOffBits; |
| |
| /* The Win32 BITMAPINFOHEADER struct (40 bytes) */ |
| Uint32 biSize; |
| Sint32 biWidth = 0; |
| Sint32 biHeight = 0; |
| /* Uint16 biPlanes; */ |
| Uint16 biBitCount = 0; |
| Uint32 biCompression = 0; |
| /* Uint32 biSizeImage; */ |
| /* Sint32 biXPelsPerMeter; */ |
| /* Sint32 biYPelsPerMeter; */ |
| Uint32 biClrUsed = 0; |
| /* Uint32 biClrImportant; */ |
| |
| /* Make sure we are passed a valid data source */ |
| surface = NULL; |
| was_error = SDL_FALSE; |
| if (src == NULL) { |
| was_error = SDL_TRUE; |
| goto done; |
| } |
| |
| /* Read in the BMP file header */ |
| fp_offset = SDL_RWtell(src); |
| SDL_ClearError(); |
| if (SDL_RWread(src, magic, 1, 2) != 2) { |
| SDL_Error(SDL_EFREAD); |
| was_error = SDL_TRUE; |
| goto done; |
| } |
| if (SDL_strncmp(magic, "BM", 2) != 0) { |
| SDL_SetError("File is not a Windows BMP file"); |
| was_error = SDL_TRUE; |
| goto done; |
| } |
| /* bfSize = */ SDL_ReadLE32(src); |
| /* bfReserved1 = */ SDL_ReadLE16(src); |
| /* bfReserved2 = */ SDL_ReadLE16(src); |
| bfOffBits = SDL_ReadLE32(src); |
| |
| /* Read the Win32 BITMAPINFOHEADER */ |
| biSize = SDL_ReadLE32(src); |
| if (biSize == 12) { /* really old BITMAPCOREHEADER */ |
| biWidth = (Uint32) SDL_ReadLE16(src); |
| biHeight = (Uint32) SDL_ReadLE16(src); |
| /* biPlanes = */ SDL_ReadLE16(src); |
| biBitCount = SDL_ReadLE16(src); |
| biCompression = BI_RGB; |
| /* biSizeImage = 0; */ |
| /* biXPelsPerMeter = 0; */ |
| /* biYPelsPerMeter = 0; */ |
| biClrUsed = 0; |
| /* biClrImportant = 0; */ |
| } else if (biSize >= 40) { /* some version of BITMAPINFOHEADER */ |
| Uint32 headerSize; |
| biWidth = SDL_ReadLE32(src); |
| biHeight = SDL_ReadLE32(src); |
| /* biPlanes = */ SDL_ReadLE16(src); |
| biBitCount = SDL_ReadLE16(src); |
| biCompression = SDL_ReadLE32(src); |
| /* biSizeImage = */ SDL_ReadLE32(src); |
| /* biXPelsPerMeter = */ SDL_ReadLE32(src); |
| /* biYPelsPerMeter = */ SDL_ReadLE32(src); |
| biClrUsed = SDL_ReadLE32(src); |
| /* biClrImportant = */ SDL_ReadLE32(src); |
| |
| /* 64 == BITMAPCOREHEADER2, an incompatible OS/2 2.x extension. Skip this stuff for now. */ |
| if (biSize != 64) { |
| /* This is complicated. If compression is BI_BITFIELDS, then |
| we have 3 DWORDS that specify the RGB masks. This is either |
| stored here in an BITMAPV2INFOHEADER (which only differs in |
| that it adds these RGB masks) and biSize >= 52, or we've got |
| these masks stored in the exact same place, but strictly |
| speaking, this is the bmiColors field in BITMAPINFO immediately |
| following the legacy v1 info header, just past biSize. */ |
| if (biCompression == BI_BITFIELDS) { |
| haveRGBMasks = SDL_TRUE; |
| Rmask = SDL_ReadLE32(src); |
| Gmask = SDL_ReadLE32(src); |
| Bmask = SDL_ReadLE32(src); |
| |
| /* ...v3 adds an alpha mask. */ |
| if (biSize >= 56) { /* BITMAPV3INFOHEADER; adds alpha mask */ |
| haveAlphaMask = SDL_TRUE; |
| Amask = SDL_ReadLE32(src); |
| } |
| } else { |
| /* the mask fields are ignored for v2+ headers if not BI_BITFIELD. */ |
| if (biSize >= 52) { /* BITMAPV2INFOHEADER; adds RGB masks */ |
| /*Rmask = */ SDL_ReadLE32(src); |
| /*Gmask = */ SDL_ReadLE32(src); |
| /*Bmask = */ SDL_ReadLE32(src); |
| } |
| if (biSize >= 56) { /* BITMAPV3INFOHEADER; adds alpha mask */ |
| /*Amask = */ SDL_ReadLE32(src); |
| } |
| } |
| |
| /* Insert other fields here; Wikipedia and MSDN say we're up to |
| v5 of this header, but we ignore those for now (they add gamma, |
| color spaces, etc). Ignoring the weird OS/2 2.x format, we |
| currently parse up to v3 correctly (hopefully!). */ |
| } |
| |
| /* skip any header bytes we didn't handle... */ |
| headerSize = (Uint32) (SDL_RWtell(src) - (fp_offset + 14)); |
| if (biSize > headerSize) { |
| SDL_RWseek(src, (biSize - headerSize), RW_SEEK_CUR); |
| } |
| } |
| if (biWidth <= 0 || biHeight == 0) { |
| SDL_SetError("BMP file with bad dimensions (%dx%d)", biWidth, biHeight); |
| was_error = SDL_TRUE; |
| goto done; |
| } |
| if (biHeight < 0) { |
| topDown = SDL_TRUE; |
| biHeight = -biHeight; |
| } else { |
| topDown = SDL_FALSE; |
| } |
| |
| /* Check for read error */ |
| if (SDL_strcmp(SDL_GetError(), "") != 0) { |
| was_error = SDL_TRUE; |
| goto done; |
| } |
| |
| /* Expand 1 and 4 bit bitmaps to 8 bits per pixel */ |
| switch (biBitCount) { |
| case 1: |
| case 4: |
| ExpandBMP = biBitCount; |
| biBitCount = 8; |
| break; |
| case 0: |
| case 2: |
| case 3: |
| case 5: |
| case 6: |
| case 7: |
| SDL_SetError("%d-bpp BMP images are not supported", biBitCount); |
| was_error = SDL_TRUE; |
| goto done; |
| default: |
| ExpandBMP = 0; |
| break; |
| } |
| |
| /* RLE4 and RLE8 BMP compression is supported */ |
| switch (biCompression) { |
| case BI_RGB: |
| /* If there are no masks, use the defaults */ |
| SDL_assert(!haveRGBMasks); |
| SDL_assert(!haveAlphaMask); |
| /* Default values for the BMP format */ |
| switch (biBitCount) { |
| case 15: |
| case 16: |
| Rmask = 0x7C00; |
| Gmask = 0x03E0; |
| Bmask = 0x001F; |
| break; |
| case 24: |
| #if SDL_BYTEORDER == SDL_BIG_ENDIAN |
| Rmask = 0x000000FF; |
| Gmask = 0x0000FF00; |
| Bmask = 0x00FF0000; |
| #else |
| Rmask = 0x00FF0000; |
| Gmask = 0x0000FF00; |
| Bmask = 0x000000FF; |
| #endif |
| break; |
| case 32: |
| /* We don't know if this has alpha channel or not */ |
| correctAlpha = SDL_TRUE; |
| Amask = 0xFF000000; |
| Rmask = 0x00FF0000; |
| Gmask = 0x0000FF00; |
| Bmask = 0x000000FF; |
| break; |
| default: |
| break; |
| } |
| break; |
| |
| case BI_BITFIELDS: |
| break; /* we handled this in the info header. */ |
| |
| default: |
| break; |
| } |
| |
| /* Create a compatible surface, note that the colors are RGB ordered */ |
| surface = |
| SDL_CreateRGBSurface(0, biWidth, biHeight, biBitCount, Rmask, Gmask, |
| Bmask, Amask); |
| if (surface == NULL) { |
| was_error = SDL_TRUE; |
| goto done; |
| } |
| |
| /* Load the palette, if any */ |
| palette = (surface->format)->palette; |
| if (palette) { |
| if (SDL_RWseek(src, fp_offset+14+biSize, RW_SEEK_SET) < 0) { |
| SDL_Error(SDL_EFSEEK); |
| was_error = SDL_TRUE; |
| goto done; |
| } |
| |
| /* |
| | guich: always use 1<<bpp b/c some bitmaps can bring wrong information |
| | for colorsUsed |
| */ |
| /* if (biClrUsed == 0) { */ |
| biClrUsed = 1 << biBitCount; |
| /* } */ |
| if (biSize == 12) { |
| for (i = 0; i < (int) biClrUsed; ++i) { |
| SDL_RWread(src, &palette->colors[i].b, 1, 1); |
| SDL_RWread(src, &palette->colors[i].g, 1, 1); |
| SDL_RWread(src, &palette->colors[i].r, 1, 1); |
| palette->colors[i].a = SDL_ALPHA_OPAQUE; |
| } |
| } else { |
| for (i = 0; i < (int) biClrUsed; ++i) { |
| SDL_RWread(src, &palette->colors[i].b, 1, 1); |
| SDL_RWread(src, &palette->colors[i].g, 1, 1); |
| SDL_RWread(src, &palette->colors[i].r, 1, 1); |
| SDL_RWread(src, &palette->colors[i].a, 1, 1); |
| |
| /* According to Microsoft documentation, the fourth element |
| is reserved and must be zero, so we shouldn't treat it as |
| alpha. |
| */ |
| palette->colors[i].a = SDL_ALPHA_OPAQUE; |
| } |
| } |
| palette->ncolors = biClrUsed; |
| } |
| |
| /* Read the surface pixels. Note that the bmp image is upside down */ |
| if (SDL_RWseek(src, fp_offset + bfOffBits, RW_SEEK_SET) < 0) { |
| SDL_Error(SDL_EFSEEK); |
| was_error = SDL_TRUE; |
| goto done; |
| } |
| if ((biCompression == BI_RLE4) || (biCompression == BI_RLE8)) { |
| was_error = (SDL_bool)readRlePixels(surface, src, biCompression == BI_RLE8); |
| if (was_error) SDL_SetError("Error reading from BMP"); |
| goto done; |
| } |
| top = (Uint8 *)surface->pixels; |
| end = (Uint8 *)surface->pixels+(surface->h*surface->pitch); |
| switch (ExpandBMP) { |
| case 1: |
| bmpPitch = (biWidth + 7) >> 3; |
| pad = (((bmpPitch) % 4) ? (4 - ((bmpPitch) % 4)) : 0); |
| break; |
| case 4: |
| bmpPitch = (biWidth + 1) >> 1; |
| pad = (((bmpPitch) % 4) ? (4 - ((bmpPitch) % 4)) : 0); |
| break; |
| default: |
| pad = ((surface->pitch % 4) ? (4 - (surface->pitch % 4)) : 0); |
| break; |
| } |
| if (topDown) { |
| bits = top; |
| } else { |
| bits = end - surface->pitch; |
| } |
| while (bits >= top && bits < end) { |
| switch (ExpandBMP) { |
| case 1: |
| case 4:{ |
| Uint8 pixel = 0; |
| int shift = (8 - ExpandBMP); |
| for (i = 0; i < surface->w; ++i) { |
| if (i % (8 / ExpandBMP) == 0) { |
| if (!SDL_RWread(src, &pixel, 1, 1)) { |
| SDL_SetError("Error reading from BMP"); |
| was_error = SDL_TRUE; |
| goto done; |
| } |
| } |
| bits[i] = (pixel >> shift); |
| if (bits[i] >= biClrUsed) { |
| SDL_SetError("A BMP image contains a pixel with a color out of the palette"); |
| was_error = SDL_TRUE; |
| goto done; |
| } |
| pixel <<= ExpandBMP; |
| } |
| } |
| break; |
| |
| default: |
| if (SDL_RWread(src, bits, 1, surface->pitch) != surface->pitch) { |
| SDL_Error(SDL_EFREAD); |
| was_error = SDL_TRUE; |
| goto done; |
| } |
| if (biBitCount == 8 && palette && biClrUsed < (1u << biBitCount)) { |
| for (i = 0; i < surface->w; ++i) { |
| if (bits[i] >= biClrUsed) { |
| SDL_SetError("A BMP image contains a pixel with a color out of the palette"); |
| was_error = SDL_TRUE; |
| goto done; |
| } |
| } |
| } |
| #if SDL_BYTEORDER == SDL_BIG_ENDIAN |
| /* Byte-swap the pixels if needed. Note that the 24bpp |
| case has already been taken care of above. */ |
| switch (biBitCount) { |
| case 15: |
| case 16:{ |
| Uint16 *pix = (Uint16 *) bits; |
| for (i = 0; i < surface->w; i++) |
| pix[i] = SDL_Swap16(pix[i]); |
| break; |
| } |
| |
| case 32:{ |
| Uint32 *pix = (Uint32 *) bits; |
| for (i = 0; i < surface->w; i++) |
| pix[i] = SDL_Swap32(pix[i]); |
| break; |
| } |
| } |
| #endif |
| break; |
| } |
| /* Skip padding bytes, ugh */ |
| if (pad) { |
| Uint8 padbyte; |
| for (i = 0; i < pad; ++i) { |
| SDL_RWread(src, &padbyte, 1, 1); |
| } |
| } |
| if (topDown) { |
| bits += surface->pitch; |
| } else { |
| bits -= surface->pitch; |
| } |
| } |
| if (correctAlpha) { |
| CorrectAlphaChannel(surface); |
| } |
| done: |
| if (was_error) { |
| if (src) { |
| SDL_RWseek(src, fp_offset, RW_SEEK_SET); |
| } |
| if (surface) { |
| SDL_FreeSurface(surface); |
| } |
| surface = NULL; |
| } |
| if (freesrc && src) { |
| SDL_RWclose(src); |
| } |
| return (surface); |
| } |
| |
| int |
| SDL_SaveBMP_RW(SDL_Surface * saveme, SDL_RWops * dst, int freedst) |
| { |
| Sint64 fp_offset; |
| int i, pad; |
| SDL_Surface *surface; |
| Uint8 *bits; |
| SDL_bool save32bit = SDL_FALSE; |
| SDL_bool saveLegacyBMP = SDL_FALSE; |
| |
| /* The Win32 BMP file header (14 bytes) */ |
| char magic[2] = { 'B', 'M' }; |
| Uint32 bfSize; |
| Uint16 bfReserved1; |
| Uint16 bfReserved2; |
| Uint32 bfOffBits; |
| |
| /* The Win32 BITMAPINFOHEADER struct (40 bytes) */ |
| Uint32 biSize; |
| Sint32 biWidth; |
| Sint32 biHeight; |
| Uint16 biPlanes; |
| Uint16 biBitCount; |
| Uint32 biCompression; |
| Uint32 biSizeImage; |
| Sint32 biXPelsPerMeter; |
| Sint32 biYPelsPerMeter; |
| Uint32 biClrUsed; |
| Uint32 biClrImportant; |
| |
| /* The additional header members from the Win32 BITMAPV4HEADER struct (108 bytes in total) */ |
| Uint32 bV4RedMask = 0; |
| Uint32 bV4GreenMask = 0; |
| Uint32 bV4BlueMask = 0; |
| Uint32 bV4AlphaMask = 0; |
| Uint32 bV4CSType = 0; |
| Sint32 bV4Endpoints[3 * 3] = {0}; |
| Uint32 bV4GammaRed = 0; |
| Uint32 bV4GammaGreen = 0; |
| Uint32 bV4GammaBlue = 0; |
| |
| /* Make sure we have somewhere to save */ |
| surface = NULL; |
| if (dst) { |
| #ifdef SAVE_32BIT_BMP |
| /* We can save alpha information in a 32-bit BMP */ |
| if (saveme->format->BitsPerPixel >= 8 && (saveme->format->Amask || |
| saveme->map->info.flags & SDL_COPY_COLORKEY)) { |
| save32bit = SDL_TRUE; |
| } |
| #endif /* SAVE_32BIT_BMP */ |
| |
| if (saveme->format->palette && !save32bit) { |
| if (saveme->format->BitsPerPixel == 8) { |
| surface = saveme; |
| } else { |
| SDL_SetError("%d bpp BMP files not supported", |
| saveme->format->BitsPerPixel); |
| } |
| } else if ((saveme->format->BitsPerPixel == 24) && !save32bit && |
| #if SDL_BYTEORDER == SDL_LIL_ENDIAN |
| (saveme->format->Rmask == 0x00FF0000) && |
| (saveme->format->Gmask == 0x0000FF00) && |
| (saveme->format->Bmask == 0x000000FF) |
| #else |
| (saveme->format->Rmask == 0x000000FF) && |
| (saveme->format->Gmask == 0x0000FF00) && |
| (saveme->format->Bmask == 0x00FF0000) |
| #endif |
| ) { |
| surface = saveme; |
| } else { |
| SDL_PixelFormat format; |
| |
| /* If the surface has a colorkey or alpha channel we'll save a |
| 32-bit BMP with alpha channel, otherwise save a 24-bit BMP. */ |
| if (save32bit) { |
| SDL_InitFormat(&format, SDL_PIXELFORMAT_BGRA32); |
| } else { |
| SDL_InitFormat(&format, SDL_PIXELFORMAT_BGR24); |
| } |
| surface = SDL_ConvertSurface(saveme, &format, 0); |
| if (!surface) { |
| SDL_SetError("Couldn't convert image to %d bpp", |
| format.BitsPerPixel); |
| } |
| } |
| } else { |
| /* Set no error here because it may overwrite a more useful message from |
| SDL_RWFromFile() if SDL_SaveBMP_RW() is called from SDL_SaveBMP(). */ |
| return -1; |
| } |
| |
| if (save32bit) { |
| saveLegacyBMP = SDL_GetHintBoolean(SDL_HINT_BMP_SAVE_LEGACY_FORMAT, SDL_FALSE); |
| } |
| |
| if (surface && (SDL_LockSurface(surface) == 0)) { |
| const int bw = surface->w * surface->format->BytesPerPixel; |
| |
| /* Set the BMP file header values */ |
| bfSize = 0; /* We'll write this when we're done */ |
| bfReserved1 = 0; |
| bfReserved2 = 0; |
| bfOffBits = 0; /* We'll write this when we're done */ |
| |
| /* Write the BMP file header values */ |
| fp_offset = SDL_RWtell(dst); |
| SDL_ClearError(); |
| SDL_RWwrite(dst, magic, 2, 1); |
| SDL_WriteLE32(dst, bfSize); |
| SDL_WriteLE16(dst, bfReserved1); |
| SDL_WriteLE16(dst, bfReserved2); |
| SDL_WriteLE32(dst, bfOffBits); |
| |
| /* Set the BMP info values */ |
| biSize = 40; |
| biWidth = surface->w; |
| biHeight = surface->h; |
| biPlanes = 1; |
| biBitCount = surface->format->BitsPerPixel; |
| biCompression = BI_RGB; |
| biSizeImage = surface->h * surface->pitch; |
| biXPelsPerMeter = 0; |
| biYPelsPerMeter = 0; |
| if (surface->format->palette) { |
| biClrUsed = surface->format->palette->ncolors; |
| } else { |
| biClrUsed = 0; |
| } |
| biClrImportant = 0; |
| |
| /* Set the BMP info values for the version 4 header */ |
| if (save32bit && !saveLegacyBMP) { |
| biSize = 108; |
| biCompression = BI_BITFIELDS; |
| /* The BMP format is always little endian, these masks stay the same */ |
| bV4RedMask = 0x00ff0000; |
| bV4GreenMask = 0x0000ff00; |
| bV4BlueMask = 0x000000ff; |
| bV4AlphaMask = 0xff000000; |
| bV4CSType = LCS_WINDOWS_COLOR_SPACE; |
| bV4GammaRed = 0; |
| bV4GammaGreen = 0; |
| bV4GammaBlue = 0; |
| } |
| |
| /* Write the BMP info values */ |
| SDL_WriteLE32(dst, biSize); |
| SDL_WriteLE32(dst, biWidth); |
| SDL_WriteLE32(dst, biHeight); |
| SDL_WriteLE16(dst, biPlanes); |
| SDL_WriteLE16(dst, biBitCount); |
| SDL_WriteLE32(dst, biCompression); |
| SDL_WriteLE32(dst, biSizeImage); |
| SDL_WriteLE32(dst, biXPelsPerMeter); |
| SDL_WriteLE32(dst, biYPelsPerMeter); |
| SDL_WriteLE32(dst, biClrUsed); |
| SDL_WriteLE32(dst, biClrImportant); |
| |
| /* Write the BMP info values for the version 4 header */ |
| if (save32bit && !saveLegacyBMP) { |
| SDL_WriteLE32(dst, bV4RedMask); |
| SDL_WriteLE32(dst, bV4GreenMask); |
| SDL_WriteLE32(dst, bV4BlueMask); |
| SDL_WriteLE32(dst, bV4AlphaMask); |
| SDL_WriteLE32(dst, bV4CSType); |
| for (i = 0; i < 3 * 3; i++) { |
| SDL_WriteLE32(dst, bV4Endpoints[i]); |
| } |
| SDL_WriteLE32(dst, bV4GammaRed); |
| SDL_WriteLE32(dst, bV4GammaGreen); |
| SDL_WriteLE32(dst, bV4GammaBlue); |
| } |
| |
| /* Write the palette (in BGR color order) */ |
| if (surface->format->palette) { |
| SDL_Color *colors; |
| int ncolors; |
| |
| colors = surface->format->palette->colors; |
| ncolors = surface->format->palette->ncolors; |
| for (i = 0; i < ncolors; ++i) { |
| SDL_RWwrite(dst, &colors[i].b, 1, 1); |
| SDL_RWwrite(dst, &colors[i].g, 1, 1); |
| SDL_RWwrite(dst, &colors[i].r, 1, 1); |
| SDL_RWwrite(dst, &colors[i].a, 1, 1); |
| } |
| } |
| |
| /* Write the bitmap offset */ |
| bfOffBits = (Uint32)(SDL_RWtell(dst) - fp_offset); |
| if (SDL_RWseek(dst, fp_offset + 10, RW_SEEK_SET) < 0) { |
| SDL_Error(SDL_EFSEEK); |
| } |
| SDL_WriteLE32(dst, bfOffBits); |
| if (SDL_RWseek(dst, fp_offset + bfOffBits, RW_SEEK_SET) < 0) { |
| SDL_Error(SDL_EFSEEK); |
| } |
| |
| /* Write the bitmap image upside down */ |
| bits = (Uint8 *) surface->pixels + (surface->h * surface->pitch); |
| pad = ((bw % 4) ? (4 - (bw % 4)) : 0); |
| while (bits > (Uint8 *) surface->pixels) { |
| bits -= surface->pitch; |
| if (SDL_RWwrite(dst, bits, 1, bw) != bw) { |
| SDL_Error(SDL_EFWRITE); |
| break; |
| } |
| if (pad) { |
| const Uint8 padbyte = 0; |
| for (i = 0; i < pad; ++i) { |
| SDL_RWwrite(dst, &padbyte, 1, 1); |
| } |
| } |
| } |
| |
| /* Write the BMP file size */ |
| bfSize = (Uint32)(SDL_RWtell(dst) - fp_offset); |
| if (SDL_RWseek(dst, fp_offset + 2, RW_SEEK_SET) < 0) { |
| SDL_Error(SDL_EFSEEK); |
| } |
| SDL_WriteLE32(dst, bfSize); |
| if (SDL_RWseek(dst, fp_offset + bfSize, RW_SEEK_SET) < 0) { |
| SDL_Error(SDL_EFSEEK); |
| } |
| |
| /* Close it up.. */ |
| SDL_UnlockSurface(surface); |
| if (surface != saveme) { |
| SDL_FreeSurface(surface); |
| } |
| } |
| |
| if (freedst && dst) { |
| SDL_RWclose(dst); |
| } |
| return ((SDL_strcmp(SDL_GetError(), "") == 0) ? 0 : -1); |
| } |
| |
| /* vi: set ts=4 sw=4 expandtab: */ |
