/**
 * Original code: automated SDL surface test written by Edgar Simo "bobbens"
 * Adapted/rewritten for test lib by Andreas Schiffler
 */

/* Supress C4996 VS compiler warnings for unlink() */
#if defined(_MSC_VER) && !defined(_CRT_SECURE_NO_DEPRECATE)
#define _CRT_SECURE_NO_DEPRECATE
#endif
#if defined(_MSC_VER) && !defined(_CRT_NONSTDC_NO_DEPRECATE)
#define _CRT_NONSTDC_NO_DEPRECATE
#endif

#include <stdio.h>
#ifndef _MSC_VER
#include <unistd.h>
#endif
#include <sys/stat.h>

#include "SDL.h"
#include "SDL_test.h"

#ifdef __MACOSX__
#include <unistd.h> /* For unlink() */
#endif

/* ================= Test Case Implementation ================== */

/* Shared test surface */

static SDL_Surface *referenceSurface = NULL;
static SDL_Surface *testSurface = NULL;

/* Helper functions for the test cases */

#define TEST_SURFACE_WIDTH  testSurface->w
#define TEST_SURFACE_HEIGHT testSurface->h

/* Fixture */

/* Create a 32-bit writable surface for blitting tests */
void _surfaceSetUp(void *arg)
{
    int result;
    SDL_BlendMode blendMode = SDL_BLENDMODE_NONE;
    SDL_BlendMode currentBlendMode;
    Uint32 rmask, gmask, bmask, amask;
#if SDL_BYTEORDER == SDL_BIG_ENDIAN
    rmask = 0xff000000;
    gmask = 0x00ff0000;
    bmask = 0x0000ff00;
    amask = 0x000000ff;
#else
    rmask = 0x000000ff;
    gmask = 0x0000ff00;
    bmask = 0x00ff0000;
    amask = 0xff000000;
#endif

    referenceSurface = SDLTest_ImageBlit(); /* For size info */
    testSurface = SDL_CreateRGBSurface(SDL_SWSURFACE, referenceSurface->w, referenceSurface->h, 32, rmask, gmask, bmask, amask);
    SDLTest_AssertCheck(testSurface != NULL, "Check that testSurface is not NULL");
    if (testSurface != NULL) {
        /* Disable blend mode for target surface */
        result = SDL_SetSurfaceBlendMode(testSurface, blendMode);
        SDLTest_AssertCheck(result == 0, "Validate result from SDL_SetSurfaceBlendMode, expected: 0, got: %i", result);
        result = SDL_GetSurfaceBlendMode(testSurface, &currentBlendMode);
        SDLTest_AssertCheck(result == 0, "Validate result from SDL_GetSurfaceBlendMode, expected: 0, got: %i", result);
        SDLTest_AssertCheck(currentBlendMode == blendMode, "Validate blendMode, expected: %i, got: %i", blendMode, currentBlendMode);
    }
}

void _surfaceTearDown(void *arg)
{
    SDL_FreeSurface(referenceSurface);
    referenceSurface = NULL;
    SDL_FreeSurface(testSurface);
    testSurface = NULL;
}

/**
 * Helper that clears the test surface
 */
void _clearTestSurface(void)
{
    int ret;
    Uint32 color;

    /* Clear surface. */
    color = SDL_MapRGBA(testSurface->format, 0, 0, 0, 0);
    SDLTest_AssertPass("Call to SDL_MapRGBA()");
    ret = SDL_FillRect(testSurface, NULL, color);
    SDLTest_AssertPass("Call to SDL_FillRect()");
    SDLTest_AssertCheck(ret == 0, "Verify result from SDL_FillRect, expected: 0, got: %i", ret);
}

/**
 * Helper that blits in a specific blend mode, -1 for basic blitting, -2 for color mod, -3 for alpha mod, -4 for mixed blend modes.
 */
void _testBlitBlendMode(int mode)
{
    int ret;
    int i, j, ni, nj;
    SDL_Surface *face;
    SDL_Rect rect;
    int nmode;
    SDL_BlendMode bmode;
    int checkFailCount1;
    int checkFailCount2;
    int checkFailCount3;
    int checkFailCount4;

    /* Check test surface */
    SDLTest_AssertCheck(testSurface != NULL, "Verify testSurface is not NULL");
    if (testSurface == NULL) {
        return;
    }

    /* Create sample surface */
    face = SDLTest_ImageFace();
    SDLTest_AssertCheck(face != NULL, "Verify face surface is not NULL");
    if (face == NULL) {
        return;
    }

    /* Reset alpha modulation */
    ret = SDL_SetSurfaceAlphaMod(face, 255);
    SDLTest_AssertPass("Call to SDL_SetSurfaceAlphaMod()");
    SDLTest_AssertCheck(ret == 0, "Verify result from SDL_SetSurfaceAlphaMod(), expected: 0, got: %i", ret);

    /* Reset color modulation */
    ret = SDL_SetSurfaceColorMod(face, 255, 255, 255);
    SDLTest_AssertPass("Call to SDL_SetSurfaceColorMod()");
    SDLTest_AssertCheck(ret == 0, "Verify result from SDL_SetSurfaceColorMod(), expected: 0, got: %i", ret);

    /* Reset color key */
    ret = SDL_SetColorKey(face, SDL_FALSE, 0);
    SDLTest_AssertPass("Call to SDL_SetColorKey()");
    SDLTest_AssertCheck(ret == 0, "Verify result from SDL_SetColorKey(), expected: 0, got: %i", ret);

    /* Clear the test surface */
    _clearTestSurface();

    /* Target rect size */
    rect.w = face->w;
    rect.h = face->h;

    /* Steps to take */
    ni = testSurface->w - face->w;
    nj = testSurface->h - face->h;

    /* Optionally set blend mode. */
    if (mode >= 0) {
        ret = SDL_SetSurfaceBlendMode(face, (SDL_BlendMode)mode);
        SDLTest_AssertPass("Call to SDL_SetSurfaceBlendMode()");
        SDLTest_AssertCheck(ret == 0, "Verify result from SDL_SetSurfaceBlendMode(..., %i), expected: 0, got: %i", mode, ret);
    }

    /* Test blend mode. */
    checkFailCount1 = 0;
    checkFailCount2 = 0;
    checkFailCount3 = 0;
    checkFailCount4 = 0;
    for (j = 0; j <= nj; j += 4) {
        for (i = 0; i <= ni; i += 4) {
            if (mode == -2) {
                /* Set color mod. */
                ret = SDL_SetSurfaceColorMod(face, (255 / nj) * j, (255 / ni) * i, (255 / nj) * j);
                if (ret != 0) {
                    checkFailCount2++;
                }
            } else if (mode == -3) {
                /* Set alpha mod. */
                ret = SDL_SetSurfaceAlphaMod(face, (255 / ni) * i);
                if (ret != 0) {
                    checkFailCount3++;
                }
            } else if (mode == -4) {
                /* Crazy blending mode magic. */
                nmode = (i / 4 * j / 4) % 4;
                if (nmode == 0) {
                    bmode = SDL_BLENDMODE_NONE;
                } else if (nmode == 1) {
                    bmode = SDL_BLENDMODE_BLEND;
                } else if (nmode == 2) {
                    bmode = SDL_BLENDMODE_ADD;
                } else if (nmode == 3) {
                    bmode = SDL_BLENDMODE_MOD;
                } else {
                    /* Should be impossible, but some static checkers are too imprecise and will complain */
                    SDLTest_LogError("Invalid: nmode=%d", nmode);
                    return;
                }
                ret = SDL_SetSurfaceBlendMode(face, bmode);
                if (ret != 0) {
                    checkFailCount4++;
                }
            }

            /* Blitting. */
            rect.x = i;
            rect.y = j;
            ret = SDL_BlitSurface(face, NULL, testSurface, &rect);
            if (ret != 0) {
                checkFailCount1++;
            }
        }
    }
    SDLTest_AssertCheck(checkFailCount1 == 0, "Validate results from calls to SDL_BlitSurface, expected: 0, got: %i", checkFailCount1);
    SDLTest_AssertCheck(checkFailCount2 == 0, "Validate results from calls to SDL_SetSurfaceColorMod, expected: 0, got: %i", checkFailCount2);
    SDLTest_AssertCheck(checkFailCount3 == 0, "Validate results from calls to SDL_SetSurfaceAlphaMod, expected: 0, got: %i", checkFailCount3);
    SDLTest_AssertCheck(checkFailCount4 == 0, "Validate results from calls to SDL_SetSurfaceBlendMode, expected: 0, got: %i", checkFailCount4);

    /* Clean up */
    SDL_FreeSurface(face);
    face = NULL;
}

/* Helper to check that a file exists */
void _AssertFileExist(const char *filename)
{
    struct stat st;
    int ret = stat(filename, &st);

    SDLTest_AssertCheck(ret == 0, "Verify file '%s' exists", filename);
}

/* Test case functions */

/**
 * @brief Tests sprite saving and loading
 */
int surface_testSaveLoadBitmap(void *arg)
{
    int ret;
    const char *sampleFilename = "testSaveLoadBitmap.bmp";
    SDL_Surface *face;
    SDL_Surface *rface;

    /* Create sample surface */
    face = SDLTest_ImageFace();
    SDLTest_AssertCheck(face != NULL, "Verify face surface is not NULL");
    if (face == NULL) {
        return TEST_ABORTED;
    }

    /* Delete test file; ignore errors */
    unlink(sampleFilename);

    /* Save a surface */
    ret = SDL_SaveBMP(face, sampleFilename);
    SDLTest_AssertPass("Call to SDL_SaveBMP()");
    SDLTest_AssertCheck(ret == 0, "Verify result from SDL_SaveBMP, expected: 0, got: %i", ret);
    _AssertFileExist(sampleFilename);

    /* Load a surface */
    rface = SDL_LoadBMP(sampleFilename);
    SDLTest_AssertPass("Call to SDL_LoadBMP()");
    SDLTest_AssertCheck(rface != NULL, "Verify result from SDL_LoadBMP is not NULL");
    if (rface != NULL) {
        SDLTest_AssertCheck(face->w == rface->w, "Verify width of loaded surface, expected: %i, got: %i", face->w, rface->w);
        SDLTest_AssertCheck(face->h == rface->h, "Verify height of loaded surface, expected: %i, got: %i", face->h, rface->h);
    }

    /* Delete test file; ignore errors */
    unlink(sampleFilename);

    /* Clean up */
    SDL_FreeSurface(face);
    face = NULL;
    SDL_FreeSurface(rface);
    rface = NULL;

    return TEST_COMPLETED;
}

/* !
 *  Tests surface conversion.
 */
int surface_testSurfaceConversion(void *arg)
{
    SDL_Surface *rface = NULL, *face = NULL;
    int ret = 0;

    /* Create sample surface */
    face = SDLTest_ImageFace();
    SDLTest_AssertCheck(face != NULL, "Verify face surface is not NULL");
    if (face == NULL) {
        return TEST_ABORTED;
    }

    /* Set transparent pixel as the pixel at (0,0) */
    if (face->format->palette) {
        ret = SDL_SetColorKey(face, SDL_RLEACCEL, *(Uint8 *)face->pixels);
        SDLTest_AssertPass("Call to SDL_SetColorKey()");
        SDLTest_AssertCheck(ret == 0, "Verify result from SDL_SetColorKey, expected: 0, got: %i", ret);
    }

    /* Convert to 32 bit to compare. */
    rface = SDL_ConvertSurface( face, testSurface->format, 0 );
    SDLTest_AssertPass("Call to SDL_ConvertSurface()");
    SDLTest_AssertCheck(rface != NULL, "Verify result from SDL_ConvertSurface is not NULL");

    /* Compare surface. */
    ret = SDLTest_CompareSurfaces(rface, face, 0);
    SDLTest_AssertCheck(ret == 0, "Validate result from SDLTest_CompareSurfaces, expected: 0, got: %i", ret);

    /* Clean up. */
    SDL_FreeSurface(face);
    face = NULL;
    SDL_FreeSurface(rface);
    rface = NULL;

    return TEST_COMPLETED;
}

/* !
 *  Tests surface conversion across all pixel formats.
 */
int surface_testCompleteSurfaceConversion(void *arg)
{
    Uint32 pixel_formats[] = {
        SDL_PIXELFORMAT_INDEX8,
        SDL_PIXELFORMAT_RGB332,
        SDL_PIXELFORMAT_RGB444,
        SDL_PIXELFORMAT_BGR444,
        SDL_PIXELFORMAT_RGB555,
        SDL_PIXELFORMAT_BGR555,
        SDL_PIXELFORMAT_ARGB4444,
        SDL_PIXELFORMAT_RGBA4444,
        SDL_PIXELFORMAT_ABGR4444,
        SDL_PIXELFORMAT_BGRA4444,
        SDL_PIXELFORMAT_ARGB1555,
        SDL_PIXELFORMAT_RGBA5551,
        SDL_PIXELFORMAT_ABGR1555,
        SDL_PIXELFORMAT_BGRA5551,
        SDL_PIXELFORMAT_RGB565,
        SDL_PIXELFORMAT_BGR565,
        SDL_PIXELFORMAT_RGB24,
        SDL_PIXELFORMAT_BGR24,
        SDL_PIXELFORMAT_RGB888,
        SDL_PIXELFORMAT_RGBX8888,
        SDL_PIXELFORMAT_BGR888,
        SDL_PIXELFORMAT_BGRX8888,
        SDL_PIXELFORMAT_ARGB8888,
        SDL_PIXELFORMAT_RGBA8888,
        SDL_PIXELFORMAT_ABGR8888,
        SDL_PIXELFORMAT_BGRA8888,
#if 0 /* We aren't testing HDR10 colorspace conversion */
        SDL_PIXELFORMAT_ARGB2101010,
#endif
    };
    SDL_Surface *face = NULL, *cvt1, *cvt2, *final;
    SDL_PixelFormat *fmt1, *fmt2;
    int i, j, ret = 0;

    /* Create sample surface */
    face = SDLTest_ImageFace();
    SDLTest_AssertCheck(face != NULL, "Verify face surface is not NULL");
    if (face == NULL) {
        return TEST_ABORTED;
    }

    /* Set transparent pixel as the pixel at (0,0) */
    if (face->format->palette) {
        ret = SDL_SetColorKey(face, SDL_RLEACCEL, *(Uint8 *)face->pixels);
        SDLTest_AssertPass("Call to SDL_SetColorKey()");
        SDLTest_AssertCheck(ret == 0, "Verify result from SDL_SetColorKey, expected: 0, got: %i", ret);
    }

    for (i = 0; i < SDL_arraysize(pixel_formats); ++i) {
        for (j = 0; j < SDL_arraysize(pixel_formats); ++j) {
            fmt1 = SDL_AllocFormat(pixel_formats[i]);
            SDL_assert(fmt1 != NULL);
            cvt1 = SDL_ConvertSurface(face, fmt1, 0);
            SDL_assert(cvt1 != NULL);

            fmt2 = SDL_AllocFormat(pixel_formats[j]);
            SDL_assert(fmt1 != NULL);
            cvt2 = SDL_ConvertSurface(cvt1, fmt2, 0);
            SDL_assert(cvt2 != NULL);

            if ( fmt1->BytesPerPixel == face->format->BytesPerPixel &&
                 fmt2->BytesPerPixel == face->format->BytesPerPixel &&
                 (fmt1->Amask != 0) == (face->format->Amask != 0) &&
                 (fmt2->Amask != 0) == (face->format->Amask != 0) ) {
                final = SDL_ConvertSurface( cvt2, face->format, 0 );
                SDL_assert(final != NULL);

                /* Compare surface. */
                ret = SDLTest_CompareSurfaces(face, final, 0);
                SDLTest_AssertCheck(ret == 0, "Validate result from SDLTest_CompareSurfaces, expected: 0, got: %i", ret);
                SDL_FreeSurface(final);
            }

            SDL_FreeSurface(cvt1);
            SDL_FreeFormat(fmt1);
            SDL_FreeSurface(cvt2);
            SDL_FreeFormat(fmt2);
        }
    }

    /* Clean up. */
    SDL_FreeSurface(face);

    return TEST_COMPLETED;
}

/**
 * @brief Tests sprite loading. A failure case.
 */
int surface_testLoadFailure(void *arg)
{
    SDL_Surface *face = SDL_LoadBMP("nonexistant.bmp");
    SDLTest_AssertCheck(face == NULL, "SDL_CreateLoadBmp");

    return TEST_COMPLETED;
}

/**
 * @brief Tests some blitting routines.
 */
int surface_testBlit(void *arg)
{
    int ret;
    SDL_Surface *compareSurface;

    /* Basic blitting */
    _testBlitBlendMode(-1);

    /* Verify result by comparing surfaces */
    compareSurface = SDLTest_ImageBlit();
    ret = SDLTest_CompareSurfaces(testSurface, compareSurface, 0);
    SDLTest_AssertCheck(ret == 0, "Validate result from SDLTest_CompareSurfaces, expected: 0, got: %i", ret);

    /* Clean up. */
    SDL_FreeSurface(compareSurface);

    return TEST_COMPLETED;
}

/**
 * @brief Tests some blitting routines with color mod
 */
int surface_testBlitColorMod(void *arg)
{
    int ret;
    SDL_Surface *compareSurface;

    /* Basic blitting with color mod */
    _testBlitBlendMode(-2);

    /* Verify result by comparing surfaces */
    compareSurface = SDLTest_ImageBlitColor();
    ret = SDLTest_CompareSurfaces(testSurface, compareSurface, 0);
    SDLTest_AssertCheck(ret == 0, "Validate result from SDLTest_CompareSurfaces, expected: 0, got: %i", ret);

    /* Clean up. */
    SDL_FreeSurface(compareSurface);

    return TEST_COMPLETED;
}

/**
 * @brief Tests some blitting routines with alpha mod
 */
int surface_testBlitAlphaMod(void *arg)
{
    int ret;
    SDL_Surface *compareSurface;

    /* Basic blitting with alpha mod */
    _testBlitBlendMode(-3);

    /* Verify result by comparing surfaces */
    compareSurface = SDLTest_ImageBlitAlpha();
    ret = SDLTest_CompareSurfaces(testSurface, compareSurface, 0);
    SDLTest_AssertCheck(ret == 0, "Validate result from SDLTest_CompareSurfaces, expected: 0, got: %i", ret);

    /* Clean up. */
    SDL_FreeSurface(compareSurface);

    return TEST_COMPLETED;
}

/**
 * @brief Tests some more blitting routines.
 */
int surface_testBlitBlendNone(void *arg)
{
    int ret;
    SDL_Surface *compareSurface;

    /* Basic blitting */
    _testBlitBlendMode(SDL_BLENDMODE_NONE);

    /* Verify result by comparing surfaces */
    compareSurface = SDLTest_ImageBlitBlendNone();
    ret = SDLTest_CompareSurfaces(testSurface, compareSurface, 0);
    SDLTest_AssertCheck(ret == 0, "Validate result from SDLTest_CompareSurfaces, expected: 0, got: %i", ret);

    /* Clean up. */
    SDL_FreeSurface(compareSurface);

    return TEST_COMPLETED;
}

/**
 * @brief Tests some more blitting routines.
 */
int surface_testBlitBlendBlend(void *arg)
{
    int ret;
    SDL_Surface *compareSurface;

    /* Blend blitting */
    _testBlitBlendMode(SDL_BLENDMODE_BLEND);

    /* Verify result by comparing surfaces */
    compareSurface = SDLTest_ImageBlitBlend();
    ret = SDLTest_CompareSurfaces(testSurface, compareSurface, 0);
    SDLTest_AssertCheck(ret == 0, "Validate result from SDLTest_CompareSurfaces, expected: 0, got: %i", ret);

    /* Clean up. */
    SDL_FreeSurface(compareSurface);

    return TEST_COMPLETED;
}

/**
 * @brief Tests some more blitting routines.
 */
int surface_testBlitBlendAdd(void *arg)
{
    int ret;
    SDL_Surface *compareSurface;

    /* Add blitting */
    _testBlitBlendMode(SDL_BLENDMODE_ADD);

    /* Verify result by comparing surfaces */
    compareSurface = SDLTest_ImageBlitBlendAdd();
    ret = SDLTest_CompareSurfaces(testSurface, compareSurface, 0);
    SDLTest_AssertCheck(ret == 0, "Validate result from SDLTest_CompareSurfaces, expected: 0, got: %i", ret);

    /* Clean up. */
    SDL_FreeSurface(compareSurface);

    return TEST_COMPLETED;
}

/**
 * @brief Tests some more blitting routines.
 */
int surface_testBlitBlendMod(void *arg)
{
    int ret;
    SDL_Surface *compareSurface;

    /* Mod blitting */
    _testBlitBlendMode(SDL_BLENDMODE_MOD);

    /* Verify result by comparing surfaces */
    compareSurface = SDLTest_ImageBlitBlendMod();
    ret = SDLTest_CompareSurfaces(testSurface, compareSurface, 0);
    SDLTest_AssertCheck(ret == 0, "Validate result from SDLTest_CompareSurfaces, expected: 0, got: %i", ret);

    /* Clean up. */
    SDL_FreeSurface(compareSurface);

    return TEST_COMPLETED;
}

/**
 * @brief Tests some more blitting routines with loop
 */
int surface_testBlitBlendLoop(void *arg)
{

    int ret;
    SDL_Surface *compareSurface;

    /* All blitting modes */
    _testBlitBlendMode(-4);

    /* Verify result by comparing surfaces */
    compareSurface = SDLTest_ImageBlitBlendAll();
    ret = SDLTest_CompareSurfaces(testSurface, compareSurface, 0);
    SDLTest_AssertCheck(ret == 0, "Validate result from SDLTest_CompareSurfaces, expected: 0, got: %i", ret);

    /* Clean up. */
    SDL_FreeSurface(compareSurface);

    return TEST_COMPLETED;
}

int surface_testOverflow(void *arg)
{
    char buf[1024];
    const char *expectedError;
    SDL_Surface *surface;

    SDL_memset(buf, '\0', sizeof(buf));

    expectedError = "Parameter 'width' is invalid";
    surface = SDL_CreateRGBSurfaceWithFormat(0, -3, 100, 8, SDL_PIXELFORMAT_INDEX8);
    SDLTest_AssertCheck(surface == NULL, "Should detect negative width");
    SDLTest_AssertCheck(SDL_strcmp(SDL_GetError(), expectedError) == 0,
                        "Expected \"%s\", got \"%s\"", expectedError, SDL_GetError());
    surface = SDL_CreateRGBSurfaceWithFormatFrom(buf, -1, 1, 8, 4, SDL_PIXELFORMAT_INDEX8);
    SDLTest_AssertCheck(surface == NULL, "Should detect negative width");
    SDLTest_AssertCheck(SDL_strcmp(SDL_GetError(), expectedError) == 0,
                        "Expected \"%s\", got \"%s\"", expectedError, SDL_GetError());
    surface = SDL_CreateRGBSurfaceFrom(buf, -1, 1, 32, 4, 0xFF000000, 0x00FF0000, 0x0000FF00, 0x000000FF);
    SDLTest_AssertCheck(surface == NULL, "Should detect negative width");
    SDLTest_AssertCheck(SDL_strcmp(SDL_GetError(), expectedError) == 0,
                        "Expected \"%s\", got \"%s\"", expectedError, SDL_GetError());

    expectedError = "Parameter 'height' is invalid";
    surface = SDL_CreateRGBSurfaceWithFormat(0, 100, -3, 8, SDL_PIXELFORMAT_INDEX8);
    SDLTest_AssertCheck(surface == NULL, "Should detect negative height");
    SDLTest_AssertCheck(SDL_strcmp(SDL_GetError(), expectedError) == 0,
                        "Expected \"%s\", got \"%s\"", expectedError, SDL_GetError());
    surface = SDL_CreateRGBSurfaceWithFormatFrom(buf, 1, -1, 8, 4, SDL_PIXELFORMAT_INDEX8);
    SDLTest_AssertCheck(surface == NULL, "Should detect negative height");
    SDLTest_AssertCheck(SDL_strcmp(SDL_GetError(), expectedError) == 0,
                        "Expected \"%s\", got \"%s\"", expectedError, SDL_GetError());
    surface = SDL_CreateRGBSurfaceFrom(buf, 1, -1, 32, 4, 0xFF000000, 0x00FF0000, 0x0000FF00, 0x000000FF);
    SDLTest_AssertCheck(surface == NULL, "Should detect negative height");
    SDLTest_AssertCheck(SDL_strcmp(SDL_GetError(), expectedError) == 0,
                        "Expected \"%s\", got \"%s\"", expectedError, SDL_GetError());

    expectedError = "Parameter 'pitch' is invalid";
    surface = SDL_CreateRGBSurfaceWithFormatFrom(buf, 4, 1, 8, -1, SDL_PIXELFORMAT_INDEX8);
    SDLTest_AssertCheck(surface == NULL, "Should detect negative pitch");
    SDLTest_AssertCheck(SDL_strcmp(SDL_GetError(), expectedError) == 0,
                        "Expected \"%s\", got \"%s\"", expectedError, SDL_GetError());
    surface = SDL_CreateRGBSurfaceFrom(buf, 1, 1, 32, -1, 0xFF000000, 0x00FF0000, 0x0000FF00, 0x000000FF);
    SDLTest_AssertCheck(surface == NULL, "Should detect negative pitch");
    SDLTest_AssertCheck(SDL_strcmp(SDL_GetError(), expectedError) == 0,
                        "Expected \"%s\", got \"%s\"", expectedError, SDL_GetError());

    /* Less than 1 byte per pixel: the pitch can legitimately be less than
     * the width, but it must be enough to hold the appropriate number of
     * bits per pixel. SDL_PIXELFORMAT_INDEX4* needs 1 byte per 2 pixels. */
    surface = SDL_CreateRGBSurfaceWithFormatFrom(buf, 6, 1, 4, 3, SDL_PIXELFORMAT_INDEX4LSB);
    SDLTest_AssertCheck(surface != NULL, "6px * 4 bits per px fits in 3 bytes: %s",
                        surface != NULL ? "(success)" : SDL_GetError());
    SDL_FreeSurface(surface);
    surface = SDL_CreateRGBSurfaceFrom(buf, 6, 1, 4, 3, 0, 0, 0, 0);
    SDLTest_AssertCheck(surface != NULL, "6px * 4 bits per px fits in 3 bytes: %s",
                        surface != NULL ? "(success)" : SDL_GetError());
    SDL_FreeSurface(surface);

    surface = SDL_CreateRGBSurfaceWithFormatFrom(buf, 7, 1, 4, 3, SDL_PIXELFORMAT_INDEX4LSB);
    SDLTest_AssertCheck(surface == NULL, "Should detect pitch < width * bpp");
    SDLTest_AssertCheck(SDL_strcmp(SDL_GetError(), expectedError) == 0,
                        "Expected \"%s\", got \"%s\"", expectedError, SDL_GetError());
    surface = SDL_CreateRGBSurfaceFrom(buf, 7, 1, 4, 3, 0, 0, 0, 0);
    SDLTest_AssertCheck(surface == NULL, "Should detect pitch < width * bpp");
    SDLTest_AssertCheck(SDL_strcmp(SDL_GetError(), expectedError) == 0,
                        "Expected \"%s\", got \"%s\"", expectedError, SDL_GetError());

    surface = SDL_CreateRGBSurfaceWithFormatFrom(buf, 7, 1, 4, 4, SDL_PIXELFORMAT_INDEX4LSB);
    SDLTest_AssertCheck(surface != NULL, "7px * 4 bits per px fits in 4 bytes: %s",
                        surface != NULL ? "(success)" : SDL_GetError());
    SDL_FreeSurface(surface);
    surface = SDL_CreateRGBSurfaceFrom(buf, 7, 1, 4, 4, 0, 0, 0, 0);
    SDLTest_AssertCheck(surface != NULL, "7px * 4 bits per px fits in 4 bytes: %s",
                        surface != NULL ? "(success)" : SDL_GetError());
    SDL_FreeSurface(surface);

    /* SDL_PIXELFORMAT_INDEX2* needs 1 byte per 4 pixels. */
    surface = SDL_CreateRGBSurfaceWithFormatFrom(buf, 12, 1, 2, 3, SDL_PIXELFORMAT_INDEX2LSB);
    SDLTest_AssertCheck(surface != NULL, "12px * 2 bits per px fits in 3 bytes: %s",
                        surface != NULL ? "(success)" : SDL_GetError());
    SDL_FreeSurface(surface);
    surface = SDL_CreateRGBSurfaceFrom(buf, 12, 1, 2, 3, 0, 0, 0, 0);
    SDLTest_AssertCheck(surface != NULL, "12px * 2 bits per px fits in 3 bytes: %s",
                        surface != NULL ? "(success)" : SDL_GetError());
    SDL_FreeSurface(surface);

    surface = SDL_CreateRGBSurfaceWithFormatFrom(buf, 13, 1, 2, 3, SDL_PIXELFORMAT_INDEX2LSB);
    SDLTest_AssertCheck(surface == NULL, "Should detect pitch < width * bpp (%d)", surface ? surface->pitch : 0);
    SDLTest_AssertCheck(SDL_strcmp(SDL_GetError(), expectedError) == 0,
                        "Expected \"%s\", got \"%s\"", expectedError, SDL_GetError());
    surface = SDL_CreateRGBSurfaceFrom(buf, 13, 1, 2, 3, 0, 0, 0, 0);
    SDLTest_AssertCheck(surface == NULL, "Should detect pitch < width * bpp");
    SDLTest_AssertCheck(SDL_strcmp(SDL_GetError(), expectedError) == 0,
                        "Expected \"%s\", got \"%s\"", expectedError, SDL_GetError());

    surface = SDL_CreateRGBSurfaceWithFormatFrom(buf, 13, 1, 2, 4, SDL_PIXELFORMAT_INDEX2LSB);
    SDLTest_AssertCheck(surface != NULL, "13px * 2 bits per px fits in 4 bytes: %s",
                        surface != NULL ? "(success)" : SDL_GetError());
    SDL_FreeSurface(surface);
    surface = SDL_CreateRGBSurfaceFrom(buf, 13, 1, 2, 4, 0, 0, 0, 0);
    SDLTest_AssertCheck(surface != NULL, "13px * 2 bits per px fits in 4 bytes: %s",
                        surface != NULL ? "(success)" : SDL_GetError());
    SDL_FreeSurface(surface);

    /* SDL_PIXELFORMAT_INDEX1* needs 1 byte per 8 pixels. */
    surface = SDL_CreateRGBSurfaceWithFormatFrom(buf, 16, 1, 1, 2, SDL_PIXELFORMAT_INDEX1LSB);
    SDLTest_AssertCheck(surface != NULL, "16px * 1 bit per px fits in 2 bytes: %s",
                        surface != NULL ? "(success)" : SDL_GetError());
    SDL_FreeSurface(surface);
    surface = SDL_CreateRGBSurfaceFrom(buf, 16, 1, 1, 2, 0, 0, 0, 0);
    SDLTest_AssertCheck(surface != NULL, "16px * 1 bit per px fits in 2 bytes: %s",
                        surface != NULL ? "(success)" : SDL_GetError());
    SDL_FreeSurface(surface);

    surface = SDL_CreateRGBSurfaceWithFormatFrom(buf, 17, 1, 1, 2, SDL_PIXELFORMAT_INDEX1LSB);
    SDLTest_AssertCheck(surface == NULL, "Should detect pitch < width * bpp");
    SDLTest_AssertCheck(SDL_strcmp(SDL_GetError(), expectedError) == 0,
                        "Expected \"%s\", got \"%s\"", expectedError, SDL_GetError());
    surface = SDL_CreateRGBSurfaceFrom(buf, 17, 1, 1, 2, 0, 0, 0, 0);
    SDLTest_AssertCheck(surface == NULL, "Should detect pitch < width * bpp");
    SDLTest_AssertCheck(SDL_strcmp(SDL_GetError(), expectedError) == 0,
                        "Expected \"%s\", got \"%s\"", expectedError, SDL_GetError());

    surface = SDL_CreateRGBSurfaceWithFormatFrom(buf, 17, 1, 1, 3, SDL_PIXELFORMAT_INDEX1LSB);
    SDLTest_AssertCheck(surface != NULL, "17px * 1 bit per px fits in 3 bytes: %s",
                        surface != NULL ? "(success)" : SDL_GetError());
    SDL_FreeSurface(surface);
    surface = SDL_CreateRGBSurfaceFrom(buf, 17, 1, 1, 3, 0, 0, 0, 0);
    SDLTest_AssertCheck(surface != NULL, "17px * 1 bit per px fits in 3 bytes: %s",
                        surface != NULL ? "(success)" : SDL_GetError());
    SDL_FreeSurface(surface);

    /* SDL_PIXELFORMAT_INDEX8 and SDL_PIXELFORMAT_RGB332 require 1 byte per pixel. */
    surface = SDL_CreateRGBSurfaceWithFormatFrom(buf, 5, 1, 8, 5, SDL_PIXELFORMAT_RGB332);
    SDLTest_AssertCheck(surface != NULL, "5px * 8 bits per px fits in 5 bytes: %s",
                        surface != NULL ? "(success)" : SDL_GetError());
    SDL_FreeSurface(surface);
    surface = SDL_CreateRGBSurfaceFrom(buf, 5, 1, 8, 5, 0, 0, 0, 0);
    SDLTest_AssertCheck(surface != NULL, "5px * 8 bits per px fits in 5 bytes: %s",
                        surface != NULL ? "(success)" : SDL_GetError());
    SDL_FreeSurface(surface);

    surface = SDL_CreateRGBSurfaceWithFormatFrom(buf, 6, 1, 8, 5, SDL_PIXELFORMAT_RGB332);
    SDLTest_AssertCheck(surface == NULL, "Should detect pitch < width * bpp");
    SDLTest_AssertCheck(SDL_strcmp(SDL_GetError(), expectedError) == 0,
                        "Expected \"%s\", got \"%s\"", expectedError, SDL_GetError());
    surface = SDL_CreateRGBSurfaceFrom(buf, 6, 1, 8, 5, 0, 0, 0, 0);
    SDLTest_AssertCheck(surface == NULL, "Should detect pitch < width * bpp");
    SDLTest_AssertCheck(SDL_strcmp(SDL_GetError(), expectedError) == 0,
                        "Expected \"%s\", got \"%s\"", expectedError, SDL_GetError());

    /* Everything else requires more than 1 byte per pixel, and rounds up
     * each pixel to an integer number of bytes (e.g. RGB555 is really
     * XRGB1555, with 1 bit per pixel wasted). */
    surface = SDL_CreateRGBSurfaceWithFormatFrom(buf, 3, 1, 15, 6, SDL_PIXELFORMAT_RGB555);
    SDLTest_AssertCheck(surface != NULL, "3px * 15 (really 16) bits per px fits in 6 bytes: %s",
                        surface != NULL ? "(success)" : SDL_GetError());
    SDL_FreeSurface(surface);
    surface = SDL_CreateRGBSurfaceFrom(buf, 3, 1, 15, 6, 0, 0, 0, 0);
    SDLTest_AssertCheck(surface != NULL, "5px * 15 (really 16) bits per px fits in 6 bytes: %s",
                        surface != NULL ? "(success)" : SDL_GetError());
    SDL_FreeSurface(surface);

    surface = SDL_CreateRGBSurfaceWithFormatFrom(buf, 4, 1, 15, 6, SDL_PIXELFORMAT_RGB555);
    SDLTest_AssertCheck(surface == NULL, "4px * 15 (really 16) bits per px doesn't fit in 6 bytes");
    SDLTest_AssertCheck(SDL_strcmp(SDL_GetError(), expectedError) == 0,
                        "Expected \"%s\", got \"%s\"", expectedError, SDL_GetError());
    surface = SDL_CreateRGBSurfaceFrom(buf, 4, 1, 15, 6, 0, 0, 0, 0);
    SDLTest_AssertCheck(surface == NULL, "4px * 15 (really 16) bits per px doesn't fit in 6 bytes");
    SDLTest_AssertCheck(SDL_strcmp(SDL_GetError(), expectedError) == 0,
                        "Expected \"%s\", got \"%s\"", expectedError, SDL_GetError());

    if (sizeof(size_t) == 4 && sizeof(int) >= 4) {
        SDL_ClearError();
        expectedError = "Out of memory";
        /* 0x5555'5555 * 3bpp = 0xffff'ffff which fits in size_t, but adding
         * alignment padding makes it overflow */
        surface = SDL_CreateRGBSurfaceWithFormat(0, 0x55555555, 1, 24, SDL_PIXELFORMAT_RGB24);
        SDLTest_AssertCheck(surface == NULL, "Should detect overflow in width + alignment");
        SDLTest_AssertCheck(SDL_strcmp(SDL_GetError(), expectedError) == 0,
                            "Expected \"%s\", got \"%s\"", expectedError, SDL_GetError());
        SDL_ClearError();
        /* 0x4000'0000 * 4bpp = 0x1'0000'0000 which (just) overflows */
        surface = SDL_CreateRGBSurfaceWithFormat(0, 0x40000000, 1, 32, SDL_PIXELFORMAT_ARGB8888);
        SDLTest_AssertCheck(surface == NULL, "Should detect overflow in width * bytes per pixel");
        SDLTest_AssertCheck(SDL_strcmp(SDL_GetError(), expectedError) == 0,
                            "Expected \"%s\", got \"%s\"", expectedError, SDL_GetError());
        SDL_ClearError();
        surface = SDL_CreateRGBSurfaceWithFormat(0, (1 << 29) - 1, (1 << 29) - 1, 8, SDL_PIXELFORMAT_INDEX8);
        SDLTest_AssertCheck(surface == NULL, "Should detect overflow in width * height");
        SDLTest_AssertCheck(SDL_strcmp(SDL_GetError(), expectedError) == 0,
                            "Expected \"%s\", got \"%s\"", expectedError, SDL_GetError());
        SDL_ClearError();
        surface = SDL_CreateRGBSurfaceWithFormat(0, (1 << 15) + 1, (1 << 15) + 1, 32, SDL_PIXELFORMAT_ARGB8888);
        SDLTest_AssertCheck(surface == NULL, "Should detect overflow in width * height * bytes per pixel");
        SDLTest_AssertCheck(SDL_strcmp(SDL_GetError(), expectedError) == 0,
                            "Expected \"%s\", got \"%s\"", expectedError, SDL_GetError());
    } else {
        SDLTest_Log("Can't easily overflow size_t on this platform");
    }

    return TEST_COMPLETED;
}

/* ================= Test References ================== */

/* Surface test cases */
static const SDLTest_TestCaseReference surfaceTest1 = {
    (SDLTest_TestCaseFp)surface_testSaveLoadBitmap, "surface_testSaveLoadBitmap", "Tests sprite saving and loading.", TEST_ENABLED
};

static const SDLTest_TestCaseReference surfaceTest2 = {
    (SDLTest_TestCaseFp)surface_testBlit, "surface_testBlit", "Tests basic blitting.", TEST_ENABLED
};

static const SDLTest_TestCaseReference surfaceTest3 = {
    (SDLTest_TestCaseFp)surface_testBlitBlendNone, "surface_testBlitBlendNone", "Tests blitting routines with none blending mode.", TEST_ENABLED
};

static const SDLTest_TestCaseReference surfaceTest4 = {
    (SDLTest_TestCaseFp)surface_testLoadFailure, "surface_testLoadFailure", "Tests sprite loading. A failure case.", TEST_ENABLED
};

static const SDLTest_TestCaseReference surfaceTest5 = {
    (SDLTest_TestCaseFp)surface_testSurfaceConversion, "surface_testSurfaceConversion", "Tests surface conversion.", TEST_ENABLED
};

static const SDLTest_TestCaseReference surfaceTest6 = {
    (SDLTest_TestCaseFp)surface_testCompleteSurfaceConversion, "surface_testCompleteSurfaceConversion", "Tests surface conversion across all pixel formats", TEST_ENABLED
};

static const SDLTest_TestCaseReference surfaceTest7 = {
    (SDLTest_TestCaseFp)surface_testBlitColorMod, "surface_testBlitColorMod", "Tests some blitting routines with color mod.", TEST_ENABLED
};

static const SDLTest_TestCaseReference surfaceTest8 = {
    (SDLTest_TestCaseFp)surface_testBlitAlphaMod, "surface_testBlitAlphaMod", "Tests some blitting routines with alpha mod.", TEST_ENABLED
};

/* TODO: rewrite test case, define new test data and re-enable; current implementation fails */
static const SDLTest_TestCaseReference surfaceTest9 = {
    (SDLTest_TestCaseFp)surface_testBlitBlendLoop, "surface_testBlitBlendLoop", "Test blitting routines with various blending modes", TEST_DISABLED
};

/* TODO: rewrite test case, define new test data and re-enable; current implementation fails */
static const SDLTest_TestCaseReference surfaceTest10 = {
    (SDLTest_TestCaseFp)surface_testBlitBlendBlend, "surface_testBlitBlendBlend", "Tests blitting routines with blend blending mode.", TEST_DISABLED
};

/* TODO: rewrite test case, define new test data and re-enable; current implementation fails */
static const SDLTest_TestCaseReference surfaceTest11 = {
    (SDLTest_TestCaseFp)surface_testBlitBlendAdd, "surface_testBlitBlendAdd", "Tests blitting routines with add blending mode.", TEST_DISABLED
};

static const SDLTest_TestCaseReference surfaceTest12 = {
    (SDLTest_TestCaseFp)surface_testBlitBlendMod, "surface_testBlitBlendMod", "Tests blitting routines with mod blending mode.", TEST_ENABLED
};

static const SDLTest_TestCaseReference surfaceTestOverflow = {
    surface_testOverflow, "surface_testOverflow", "Test overflow detection.", TEST_ENABLED
};

/* Sequence of Surface test cases */
static const SDLTest_TestCaseReference *surfaceTests[] = {
    &surfaceTest1, &surfaceTest2, &surfaceTest3, &surfaceTest4, &surfaceTest5,
    &surfaceTest6, &surfaceTest7, &surfaceTest8, &surfaceTest9, &surfaceTest10,
    &surfaceTest11, &surfaceTest12, &surfaceTestOverflow, NULL
};

/* Surface test suite (global) */
SDLTest_TestSuiteReference surfaceTestSuite = {
    "Surface",
    _surfaceSetUp,
    surfaceTests,
    _surfaceTearDown

};