diff --git a/Makefile.am b/Makefile.am
index 42cff57..86895a1 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -51,11 +51,11 @@
         jconfig.vms
 
 # Support scripts for configure
-CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp missing
+CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp \
+        missing ar-lib
 
 # Miscellaneous support files
-OTHERFILES= jconfig.txt ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm \
-        libjpeg.map
+OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map
 
 # Test support files
 TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \
diff --git a/Makefile.in b/Makefile.in
index 5bda1fb..d9a3664 100644
--- a/Makefile.in
+++ b/Makefile.in
@@ -1,9 +1,8 @@
-# Makefile.in generated by automake 1.11.2 from Makefile.am.
+# Makefile.in generated by automake 1.13.1 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
+# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -24,6 +23,23 @@
 
 
 VPATH = @srcdir@
+am__make_dryrun = \
+  { \
+    am__dry=no; \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
+          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+      *) \
+        for am__flg in $$MAKEFLAGS; do \
+          case $$am__flg in \
+            *=*|--*) ;; \
+            *n*) am__dry=yes; break;; \
+          esac; \
+        done;; \
+    esac; \
+    test $$am__dry = yes; \
+  }
 pkgdatadir = $(datadir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
@@ -43,15 +59,14 @@
 build_triplet = @build@
 host_triplet = @host@
 target_triplet = @target@
-ANSI2KNR = @ANSI2KNR@
 @HAVE_LD_VERSION_SCRIPT_TRUE@am__append_1 = -Wl,--version-script=$(srcdir)/libjpeg.map
 bin_PROGRAMS = cjpeg$(EXEEXT) djpeg$(EXEEXT) jpegtran$(EXEEXT) \
 	rdjpgcom$(EXEEXT) wrjpgcom$(EXEEXT)
 subdir = .
-DIST_COMMON = README $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
 	$(top_srcdir)/configure $(am__configure_deps) \
-	$(srcdir)/jconfig.cfg ansi2knr.c ansi2knr.1 depcomp \
-	$(include_HEADERS) $(noinst_HEADERS)
+	$(srcdir)/jconfig.cfg depcomp $(include_HEADERS) \
+	$(noinst_HEADERS)
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
@@ -93,47 +108,58 @@
 	"$(DESTDIR)$(man1dir)" "$(DESTDIR)$(includedir)"
 LTLIBRARIES = $(lib_LTLIBRARIES)
 libjpeg_la_LIBADD =
-am__objects_1 = jaricom$U.lo jcapimin$U.lo jcapistd$U.lo jcarith$U.lo \
-	jccoefct$U.lo jccolor$U.lo jcdctmgr$U.lo jchuff$U.lo \
-	jcinit$U.lo jcmainct$U.lo jcmarker$U.lo jcmaster$U.lo \
-	jcomapi$U.lo jcparam$U.lo jcprepct$U.lo jcsample$U.lo \
-	jctrans$U.lo jdapimin$U.lo jdapistd$U.lo jdarith$U.lo \
-	jdatadst$U.lo jdatasrc$U.lo jdcoefct$U.lo jdcolor$U.lo \
-	jddctmgr$U.lo jdhuff$U.lo jdinput$U.lo jdmainct$U.lo \
-	jdmarker$U.lo jdmaster$U.lo jdmerge$U.lo jdpostct$U.lo \
-	jdsample$U.lo jdtrans$U.lo jerror$U.lo jfdctflt$U.lo \
-	jfdctfst$U.lo jfdctint$U.lo jidctflt$U.lo jidctfst$U.lo \
-	jidctint$U.lo jquant1$U.lo jquant2$U.lo jutils$U.lo \
-	jmemmgr$U.lo @MEMORYMGR@$U.lo
+am__objects_1 = jaricom.lo jcapimin.lo jcapistd.lo jcarith.lo \
+	jccoefct.lo jccolor.lo jcdctmgr.lo jchuff.lo jcinit.lo \
+	jcmainct.lo jcmarker.lo jcmaster.lo jcomapi.lo jcparam.lo \
+	jcprepct.lo jcsample.lo jctrans.lo jdapimin.lo jdapistd.lo \
+	jdarith.lo jdatadst.lo jdatasrc.lo jdcoefct.lo jdcolor.lo \
+	jddctmgr.lo jdhuff.lo jdinput.lo jdmainct.lo jdmarker.lo \
+	jdmaster.lo jdmerge.lo jdpostct.lo jdsample.lo jdtrans.lo \
+	jerror.lo jfdctflt.lo jfdctfst.lo jfdctint.lo jidctflt.lo \
+	jidctfst.lo jidctint.lo jquant1.lo jquant2.lo jutils.lo \
+	jmemmgr.lo @MEMORYMGR@.lo
 am_libjpeg_la_OBJECTS = $(am__objects_1)
 libjpeg_la_OBJECTS = $(am_libjpeg_la_OBJECTS)
-AM_V_lt = $(am__v_lt_$(V))
-am__v_lt_ = $(am__v_lt_$(AM_DEFAULT_VERBOSITY))
+AM_V_lt = $(am__v_lt_@AM_V@)
+am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
 am__v_lt_0 = --silent
+am__v_lt_1 = 
 libjpeg_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
 	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
 	$(libjpeg_la_LDFLAGS) $(LDFLAGS) -o $@
 PROGRAMS = $(bin_PROGRAMS)
-am_cjpeg_OBJECTS = cjpeg$U.$(OBJEXT) rdppm$U.$(OBJEXT) \
-	rdgif$U.$(OBJEXT) rdtarga$U.$(OBJEXT) rdrle$U.$(OBJEXT) \
-	rdbmp$U.$(OBJEXT) rdswitch$U.$(OBJEXT) cdjpeg$U.$(OBJEXT)
+am_cjpeg_OBJECTS = cjpeg.$(OBJEXT) rdppm.$(OBJEXT) rdgif.$(OBJEXT) \
+	rdtarga.$(OBJEXT) rdrle.$(OBJEXT) rdbmp.$(OBJEXT) \
+	rdswitch.$(OBJEXT) cdjpeg.$(OBJEXT)
 cjpeg_OBJECTS = $(am_cjpeg_OBJECTS)
 cjpeg_DEPENDENCIES = libjpeg.la
-am_djpeg_OBJECTS = djpeg$U.$(OBJEXT) wrppm$U.$(OBJEXT) \
-	wrgif$U.$(OBJEXT) wrtarga$U.$(OBJEXT) wrrle$U.$(OBJEXT) \
-	wrbmp$U.$(OBJEXT) rdcolmap$U.$(OBJEXT) cdjpeg$U.$(OBJEXT)
+am_djpeg_OBJECTS = djpeg.$(OBJEXT) wrppm.$(OBJEXT) wrgif.$(OBJEXT) \
+	wrtarga.$(OBJEXT) wrrle.$(OBJEXT) wrbmp.$(OBJEXT) \
+	rdcolmap.$(OBJEXT) cdjpeg.$(OBJEXT)
 djpeg_OBJECTS = $(am_djpeg_OBJECTS)
 djpeg_DEPENDENCIES = libjpeg.la
-am_jpegtran_OBJECTS = jpegtran$U.$(OBJEXT) rdswitch$U.$(OBJEXT) \
-	cdjpeg$U.$(OBJEXT) transupp$U.$(OBJEXT)
+am_jpegtran_OBJECTS = jpegtran.$(OBJEXT) rdswitch.$(OBJEXT) \
+	cdjpeg.$(OBJEXT) transupp.$(OBJEXT)
 jpegtran_OBJECTS = $(am_jpegtran_OBJECTS)
 jpegtran_DEPENDENCIES = libjpeg.la
-am_rdjpgcom_OBJECTS = rdjpgcom$U.$(OBJEXT)
+am_rdjpgcom_OBJECTS = rdjpgcom.$(OBJEXT)
 rdjpgcom_OBJECTS = $(am_rdjpgcom_OBJECTS)
 rdjpgcom_LDADD = $(LDADD)
-am_wrjpgcom_OBJECTS = wrjpgcom$U.$(OBJEXT)
+am_wrjpgcom_OBJECTS = wrjpgcom.$(OBJEXT)
 wrjpgcom_OBJECTS = $(am_wrjpgcom_OBJECTS)
 wrjpgcom_LDADD = $(LDADD)
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
 DEFAULT_INCLUDES = -I.@am__isrc@
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
@@ -144,30 +170,51 @@
 	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
 	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
 	$(AM_CFLAGS) $(CFLAGS)
-AM_V_CC = $(am__v_CC_$(V))
-am__v_CC_ = $(am__v_CC_$(AM_DEFAULT_VERBOSITY))
-am__v_CC_0 = @echo "  CC    " $@;
-AM_V_at = $(am__v_at_$(V))
-am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
-am__v_at_0 = @
+AM_V_CC = $(am__v_CC_@AM_V@)
+am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
+am__v_CC_0 = @echo "  CC      " $@;
+am__v_CC_1 = 
 CCLD = $(CC)
 LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
 	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
 	$(AM_LDFLAGS) $(LDFLAGS) -o $@
-AM_V_CCLD = $(am__v_CCLD_$(V))
-am__v_CCLD_ = $(am__v_CCLD_$(AM_DEFAULT_VERBOSITY))
-am__v_CCLD_0 = @echo "  CCLD  " $@;
-AM_V_GEN = $(am__v_GEN_$(V))
-am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
-am__v_GEN_0 = @echo "  GEN   " $@;
+AM_V_CCLD = $(am__v_CCLD_@AM_V@)
+am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
+am__v_CCLD_0 = @echo "  CCLD    " $@;
+am__v_CCLD_1 = 
 SOURCES = $(libjpeg_la_SOURCES) $(cjpeg_SOURCES) $(djpeg_SOURCES) \
 	$(jpegtran_SOURCES) $(rdjpgcom_SOURCES) $(wrjpgcom_SOURCES)
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
 man1dir = $(mandir)/man1
 NROFF = nroff
 MANS = $(man_MANS)
 HEADERS = $(include_HEADERS) $(noinst_HEADERS)
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
+	$(LISP)jconfig.cfg
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
 ETAGS = etags
 CTAGS = ctags
+CSCOPE = cscope
+AM_RECURSIVE_TARGETS = cscope
 ACLOCAL = @ACLOCAL@
 AMTAR = @AMTAR@
 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
@@ -233,7 +280,6 @@
 SET_MAKE = @SET_MAKE@
 SHELL = @SHELL@
 STRIP = @STRIP@
-U = @U@
 VERSION = @VERSION@
 abs_builddir = @abs_builddir@
 abs_srcdir = @abs_srcdir@
@@ -343,12 +389,12 @@
 
 
 # Support scripts for configure
-CONFIGUREFILES = config.guess config.sub install-sh ltmain.sh depcomp missing
+CONFIGUREFILES = config.guess config.sub install-sh ltmain.sh depcomp \
+        missing ar-lib
+
 
 # Miscellaneous support files
-OTHERFILES = jconfig.txt ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm \
-        libjpeg.map
-
+OTHERFILES = jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map
 
 # Test support files
 TESTFILES = testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \
@@ -451,9 +497,9 @@
 
 distclean-hdr:
 	-rm -f jconfig.h stamp-h1
+
 install-libLTLIBRARIES: $(lib_LTLIBRARIES)
 	@$(NORMAL_INSTALL)
-	test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)"
 	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
 	list2=; for p in $$list; do \
 	  if test -f $$p; then \
@@ -461,6 +507,8 @@
 	  else :; fi; \
 	done; \
 	test -z "$$list2" || { \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(libdir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(libdir)" || exit 1; \
 	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \
 	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \
 	}
@@ -476,24 +524,31 @@
 
 clean-libLTLIBRARIES:
 	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
-	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
-	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
-	  test "$$dir" != "$$p" || dir=.; \
-	  echo "rm -f \"$${dir}/so_locations\""; \
-	  rm -f "$${dir}/so_locations"; \
-	done
-libjpeg.la: $(libjpeg_la_OBJECTS) $(libjpeg_la_DEPENDENCIES) 
+	@list='$(lib_LTLIBRARIES)'; \
+	locs=`for p in $$list; do echo $$p; done | \
+	      sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
+	      sort -u`; \
+	test -z "$$locs" || { \
+	  echo rm -f $${locs}; \
+	  rm -f $${locs}; \
+	}
+libjpeg.la: $(libjpeg_la_OBJECTS) $(libjpeg_la_DEPENDENCIES) $(EXTRA_libjpeg_la_DEPENDENCIES) 
 	$(AM_V_CCLD)$(libjpeg_la_LINK) -rpath $(libdir) $(libjpeg_la_OBJECTS) $(libjpeg_la_LIBADD) $(LIBS)
 install-binPROGRAMS: $(bin_PROGRAMS)
 	@$(NORMAL_INSTALL)
-	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
 	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+	fi; \
 	for p in $$list; do echo "$$p $$p"; done | \
 	sed 's/$(EXEEXT)$$//' | \
-	while read p p1; do if test -f $$p || test -f $$p1; \
-	  then echo "$$p"; echo "$$p"; else :; fi; \
+	while read p p1; do if test -f $$p \
+	 || test -f $$p1 \
+	  ; then echo "$$p"; echo "$$p"; else :; fi; \
 	done | \
-	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+	sed -e 'p;s,.*/,,;n;h' \
+	    -e 's|.*|.|' \
 	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
 	sed 'N;N;N;s,\n, ,g' | \
 	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
@@ -514,7 +569,8 @@
 	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
 	files=`for p in $$list; do echo "$$p"; done | \
 	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
-	      -e 's/$$/$(EXEEXT)/' `; \
+	      -e 's/$$/$(EXEEXT)/' \
+	`; \
 	test -n "$$list" || exit 0; \
 	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
 	cd "$(DESTDIR)$(bindir)" && rm -f $$files
@@ -527,19 +583,19 @@
 	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
 	echo " rm -f" $$list; \
 	rm -f $$list
-cjpeg$(EXEEXT): $(cjpeg_OBJECTS) $(cjpeg_DEPENDENCIES) 
+cjpeg$(EXEEXT): $(cjpeg_OBJECTS) $(cjpeg_DEPENDENCIES) $(EXTRA_cjpeg_DEPENDENCIES) 
 	@rm -f cjpeg$(EXEEXT)
 	$(AM_V_CCLD)$(LINK) $(cjpeg_OBJECTS) $(cjpeg_LDADD) $(LIBS)
-djpeg$(EXEEXT): $(djpeg_OBJECTS) $(djpeg_DEPENDENCIES) 
+djpeg$(EXEEXT): $(djpeg_OBJECTS) $(djpeg_DEPENDENCIES) $(EXTRA_djpeg_DEPENDENCIES) 
 	@rm -f djpeg$(EXEEXT)
 	$(AM_V_CCLD)$(LINK) $(djpeg_OBJECTS) $(djpeg_LDADD) $(LIBS)
-jpegtran$(EXEEXT): $(jpegtran_OBJECTS) $(jpegtran_DEPENDENCIES) 
+jpegtran$(EXEEXT): $(jpegtran_OBJECTS) $(jpegtran_DEPENDENCIES) $(EXTRA_jpegtran_DEPENDENCIES) 
 	@rm -f jpegtran$(EXEEXT)
 	$(AM_V_CCLD)$(LINK) $(jpegtran_OBJECTS) $(jpegtran_LDADD) $(LIBS)
-rdjpgcom$(EXEEXT): $(rdjpgcom_OBJECTS) $(rdjpgcom_DEPENDENCIES) 
+rdjpgcom$(EXEEXT): $(rdjpgcom_OBJECTS) $(rdjpgcom_DEPENDENCIES) $(EXTRA_rdjpgcom_DEPENDENCIES) 
 	@rm -f rdjpgcom$(EXEEXT)
 	$(AM_V_CCLD)$(LINK) $(rdjpgcom_OBJECTS) $(rdjpgcom_LDADD) $(LIBS)
-wrjpgcom$(EXEEXT): $(wrjpgcom_OBJECTS) $(wrjpgcom_DEPENDENCIES) 
+wrjpgcom$(EXEEXT): $(wrjpgcom_OBJECTS) $(wrjpgcom_DEPENDENCIES) $(EXTRA_wrjpgcom_DEPENDENCIES) 
 	@rm -f wrjpgcom$(EXEEXT)
 	$(AM_V_CCLD)$(LINK) $(wrjpgcom_OBJECTS) $(wrjpgcom_LDADD) $(LIBS)
 
@@ -548,81 +604,72 @@
 
 distclean-compile:
 	-rm -f *.tab.c
-./ansi2knr: ansi2knr.$(OBJEXT)
-	$(LINK) ansi2knr.$(OBJEXT) $(LIBS)
-ansi2knr.$(OBJEXT): $(CONFIG_HEADER)
 
-clean-krextra:
-	-rm -f ansi2knr
-
-mostlyclean-kr:
-	-test "$U" = "" || rm -f *_.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/@MEMORYMGR@$U.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cdjpeg$U.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cjpeg$U.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/djpeg$U.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jaricom$U.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcapimin$U.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcapistd$U.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcarith$U.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jccoefct$U.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jccolor$U.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcdctmgr$U.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jchuff$U.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcinit$U.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcmainct$U.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcmarker$U.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcmaster$U.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcomapi$U.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcparam$U.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcprepct$U.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcsample$U.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jctrans$U.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdapimin$U.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdapistd$U.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdarith$U.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdatadst$U.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdatasrc$U.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdcoefct$U.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdcolor$U.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jddctmgr$U.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdhuff$U.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdinput$U.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdmainct$U.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdmarker$U.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdmaster$U.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdmerge$U.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdpostct$U.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdsample$U.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdtrans$U.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jerror$U.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jfdctflt$U.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jfdctfst$U.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jfdctint$U.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jidctflt$U.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jidctfst$U.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jidctint$U.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jmemmgr$U.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jpegtran$U.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jquant1$U.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jquant2$U.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jutils$U.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rdbmp$U.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rdcolmap$U.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rdgif$U.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rdjpgcom$U.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rdppm$U.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rdrle$U.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rdswitch$U.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rdtarga$U.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/transupp$U.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wrbmp$U.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wrgif$U.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wrjpgcom$U.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wrppm$U.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wrrle$U.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wrtarga$U.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/@MEMORYMGR@.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cdjpeg.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cjpeg.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/djpeg.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jaricom.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcapimin.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcapistd.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcarith.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jccoefct.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jccolor.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcdctmgr.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jchuff.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcinit.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcmainct.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcmarker.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcmaster.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcomapi.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcparam.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcprepct.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcsample.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jctrans.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdapimin.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdapistd.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdarith.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdatadst.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdatasrc.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdcoefct.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdcolor.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jddctmgr.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdhuff.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdinput.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdmainct.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdmarker.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdmaster.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdmerge.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdpostct.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdsample.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdtrans.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jerror.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jfdctflt.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jfdctfst.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jfdctint.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jidctflt.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jidctfst.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jidctint.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jmemmgr.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jpegtran.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jquant1.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jquant2.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jutils.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rdbmp.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rdcolmap.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rdgif.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rdjpgcom.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rdppm.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rdrle.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rdswitch.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rdtarga.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/transupp.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wrbmp.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wrgif.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wrjpgcom.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wrppm.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wrrle.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wrtarga.Po@am__quote@
 
 .c.o:
 @am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@@ -644,169 +691,6 @@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
-@MEMORYMGR@_.c: @MEMORYMGR@.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/@MEMORYMGR@.c; then echo $(srcdir)/@MEMORYMGR@.c; else echo @MEMORYMGR@.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-cdjpeg_.c: cdjpeg.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/cdjpeg.c; then echo $(srcdir)/cdjpeg.c; else echo cdjpeg.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-cjpeg_.c: cjpeg.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/cjpeg.c; then echo $(srcdir)/cjpeg.c; else echo cjpeg.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-djpeg_.c: djpeg.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/djpeg.c; then echo $(srcdir)/djpeg.c; else echo djpeg.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-jaricom_.c: jaricom.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jaricom.c; then echo $(srcdir)/jaricom.c; else echo jaricom.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-jcapimin_.c: jcapimin.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jcapimin.c; then echo $(srcdir)/jcapimin.c; else echo jcapimin.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-jcapistd_.c: jcapistd.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jcapistd.c; then echo $(srcdir)/jcapistd.c; else echo jcapistd.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-jcarith_.c: jcarith.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jcarith.c; then echo $(srcdir)/jcarith.c; else echo jcarith.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-jccoefct_.c: jccoefct.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jccoefct.c; then echo $(srcdir)/jccoefct.c; else echo jccoefct.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-jccolor_.c: jccolor.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jccolor.c; then echo $(srcdir)/jccolor.c; else echo jccolor.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-jcdctmgr_.c: jcdctmgr.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jcdctmgr.c; then echo $(srcdir)/jcdctmgr.c; else echo jcdctmgr.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-jchuff_.c: jchuff.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jchuff.c; then echo $(srcdir)/jchuff.c; else echo jchuff.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-jcinit_.c: jcinit.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jcinit.c; then echo $(srcdir)/jcinit.c; else echo jcinit.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-jcmainct_.c: jcmainct.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jcmainct.c; then echo $(srcdir)/jcmainct.c; else echo jcmainct.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-jcmarker_.c: jcmarker.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jcmarker.c; then echo $(srcdir)/jcmarker.c; else echo jcmarker.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-jcmaster_.c: jcmaster.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jcmaster.c; then echo $(srcdir)/jcmaster.c; else echo jcmaster.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-jcomapi_.c: jcomapi.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jcomapi.c; then echo $(srcdir)/jcomapi.c; else echo jcomapi.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-jcparam_.c: jcparam.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jcparam.c; then echo $(srcdir)/jcparam.c; else echo jcparam.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-jcprepct_.c: jcprepct.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jcprepct.c; then echo $(srcdir)/jcprepct.c; else echo jcprepct.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-jcsample_.c: jcsample.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jcsample.c; then echo $(srcdir)/jcsample.c; else echo jcsample.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-jctrans_.c: jctrans.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jctrans.c; then echo $(srcdir)/jctrans.c; else echo jctrans.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-jdapimin_.c: jdapimin.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jdapimin.c; then echo $(srcdir)/jdapimin.c; else echo jdapimin.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-jdapistd_.c: jdapistd.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jdapistd.c; then echo $(srcdir)/jdapistd.c; else echo jdapistd.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-jdarith_.c: jdarith.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jdarith.c; then echo $(srcdir)/jdarith.c; else echo jdarith.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-jdatadst_.c: jdatadst.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jdatadst.c; then echo $(srcdir)/jdatadst.c; else echo jdatadst.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-jdatasrc_.c: jdatasrc.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jdatasrc.c; then echo $(srcdir)/jdatasrc.c; else echo jdatasrc.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-jdcoefct_.c: jdcoefct.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jdcoefct.c; then echo $(srcdir)/jdcoefct.c; else echo jdcoefct.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-jdcolor_.c: jdcolor.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jdcolor.c; then echo $(srcdir)/jdcolor.c; else echo jdcolor.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-jddctmgr_.c: jddctmgr.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jddctmgr.c; then echo $(srcdir)/jddctmgr.c; else echo jddctmgr.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-jdhuff_.c: jdhuff.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jdhuff.c; then echo $(srcdir)/jdhuff.c; else echo jdhuff.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-jdinput_.c: jdinput.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jdinput.c; then echo $(srcdir)/jdinput.c; else echo jdinput.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-jdmainct_.c: jdmainct.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jdmainct.c; then echo $(srcdir)/jdmainct.c; else echo jdmainct.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-jdmarker_.c: jdmarker.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jdmarker.c; then echo $(srcdir)/jdmarker.c; else echo jdmarker.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-jdmaster_.c: jdmaster.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jdmaster.c; then echo $(srcdir)/jdmaster.c; else echo jdmaster.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-jdmerge_.c: jdmerge.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jdmerge.c; then echo $(srcdir)/jdmerge.c; else echo jdmerge.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-jdpostct_.c: jdpostct.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jdpostct.c; then echo $(srcdir)/jdpostct.c; else echo jdpostct.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-jdsample_.c: jdsample.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jdsample.c; then echo $(srcdir)/jdsample.c; else echo jdsample.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-jdtrans_.c: jdtrans.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jdtrans.c; then echo $(srcdir)/jdtrans.c; else echo jdtrans.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-jerror_.c: jerror.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jerror.c; then echo $(srcdir)/jerror.c; else echo jerror.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-jfdctflt_.c: jfdctflt.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jfdctflt.c; then echo $(srcdir)/jfdctflt.c; else echo jfdctflt.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-jfdctfst_.c: jfdctfst.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jfdctfst.c; then echo $(srcdir)/jfdctfst.c; else echo jfdctfst.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-jfdctint_.c: jfdctint.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jfdctint.c; then echo $(srcdir)/jfdctint.c; else echo jfdctint.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-jidctflt_.c: jidctflt.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jidctflt.c; then echo $(srcdir)/jidctflt.c; else echo jidctflt.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-jidctfst_.c: jidctfst.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jidctfst.c; then echo $(srcdir)/jidctfst.c; else echo jidctfst.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-jidctint_.c: jidctint.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jidctint.c; then echo $(srcdir)/jidctint.c; else echo jidctint.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-jmemmgr_.c: jmemmgr.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jmemmgr.c; then echo $(srcdir)/jmemmgr.c; else echo jmemmgr.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-jpegtran_.c: jpegtran.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jpegtran.c; then echo $(srcdir)/jpegtran.c; else echo jpegtran.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-jquant1_.c: jquant1.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jquant1.c; then echo $(srcdir)/jquant1.c; else echo jquant1.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-jquant2_.c: jquant2.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jquant2.c; then echo $(srcdir)/jquant2.c; else echo jquant2.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-jutils_.c: jutils.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jutils.c; then echo $(srcdir)/jutils.c; else echo jutils.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-rdbmp_.c: rdbmp.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/rdbmp.c; then echo $(srcdir)/rdbmp.c; else echo rdbmp.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-rdcolmap_.c: rdcolmap.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/rdcolmap.c; then echo $(srcdir)/rdcolmap.c; else echo rdcolmap.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-rdgif_.c: rdgif.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/rdgif.c; then echo $(srcdir)/rdgif.c; else echo rdgif.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-rdjpgcom_.c: rdjpgcom.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/rdjpgcom.c; then echo $(srcdir)/rdjpgcom.c; else echo rdjpgcom.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-rdppm_.c: rdppm.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/rdppm.c; then echo $(srcdir)/rdppm.c; else echo rdppm.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-rdrle_.c: rdrle.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/rdrle.c; then echo $(srcdir)/rdrle.c; else echo rdrle.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-rdswitch_.c: rdswitch.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/rdswitch.c; then echo $(srcdir)/rdswitch.c; else echo rdswitch.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-rdtarga_.c: rdtarga.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/rdtarga.c; then echo $(srcdir)/rdtarga.c; else echo rdtarga.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-transupp_.c: transupp.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/transupp.c; then echo $(srcdir)/transupp.c; else echo transupp.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-wrbmp_.c: wrbmp.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/wrbmp.c; then echo $(srcdir)/wrbmp.c; else echo wrbmp.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-wrgif_.c: wrgif.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/wrgif.c; then echo $(srcdir)/wrgif.c; else echo wrgif.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-wrjpgcom_.c: wrjpgcom.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/wrjpgcom.c; then echo $(srcdir)/wrjpgcom.c; else echo wrjpgcom.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-wrppm_.c: wrppm.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/wrppm.c; then echo $(srcdir)/wrppm.c; else echo wrppm.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-wrrle_.c: wrrle.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/wrrle.c; then echo $(srcdir)/wrrle.c; else echo wrrle.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-wrtarga_.c: wrtarga.c $(ANSI2KNR)
-	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/wrtarga.c; then echo $(srcdir)/wrtarga.c; else echo wrtarga.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
-@MEMORYMGR@_.$(OBJEXT) @MEMORYMGR@_.lo cdjpeg_.$(OBJEXT) cdjpeg_.lo \
-cjpeg_.$(OBJEXT) cjpeg_.lo djpeg_.$(OBJEXT) djpeg_.lo \
-jaricom_.$(OBJEXT) jaricom_.lo jcapimin_.$(OBJEXT) jcapimin_.lo \
-jcapistd_.$(OBJEXT) jcapistd_.lo jcarith_.$(OBJEXT) jcarith_.lo \
-jccoefct_.$(OBJEXT) jccoefct_.lo jccolor_.$(OBJEXT) jccolor_.lo \
-jcdctmgr_.$(OBJEXT) jcdctmgr_.lo jchuff_.$(OBJEXT) jchuff_.lo \
-jcinit_.$(OBJEXT) jcinit_.lo jcmainct_.$(OBJEXT) jcmainct_.lo \
-jcmarker_.$(OBJEXT) jcmarker_.lo jcmaster_.$(OBJEXT) jcmaster_.lo \
-jcomapi_.$(OBJEXT) jcomapi_.lo jcparam_.$(OBJEXT) jcparam_.lo \
-jcprepct_.$(OBJEXT) jcprepct_.lo jcsample_.$(OBJEXT) jcsample_.lo \
-jctrans_.$(OBJEXT) jctrans_.lo jdapimin_.$(OBJEXT) jdapimin_.lo \
-jdapistd_.$(OBJEXT) jdapistd_.lo jdarith_.$(OBJEXT) jdarith_.lo \
-jdatadst_.$(OBJEXT) jdatadst_.lo jdatasrc_.$(OBJEXT) jdatasrc_.lo \
-jdcoefct_.$(OBJEXT) jdcoefct_.lo jdcolor_.$(OBJEXT) jdcolor_.lo \
-jddctmgr_.$(OBJEXT) jddctmgr_.lo jdhuff_.$(OBJEXT) jdhuff_.lo \
-jdinput_.$(OBJEXT) jdinput_.lo jdmainct_.$(OBJEXT) jdmainct_.lo \
-jdmarker_.$(OBJEXT) jdmarker_.lo jdmaster_.$(OBJEXT) jdmaster_.lo \
-jdmerge_.$(OBJEXT) jdmerge_.lo jdpostct_.$(OBJEXT) jdpostct_.lo \
-jdsample_.$(OBJEXT) jdsample_.lo jdtrans_.$(OBJEXT) jdtrans_.lo \
-jerror_.$(OBJEXT) jerror_.lo jfdctflt_.$(OBJEXT) jfdctflt_.lo \
-jfdctfst_.$(OBJEXT) jfdctfst_.lo jfdctint_.$(OBJEXT) jfdctint_.lo \
-jidctflt_.$(OBJEXT) jidctflt_.lo jidctfst_.$(OBJEXT) jidctfst_.lo \
-jidctint_.$(OBJEXT) jidctint_.lo jmemmgr_.$(OBJEXT) jmemmgr_.lo \
-jpegtran_.$(OBJEXT) jpegtran_.lo jquant1_.$(OBJEXT) jquant1_.lo \
-jquant2_.$(OBJEXT) jquant2_.lo jutils_.$(OBJEXT) jutils_.lo \
-rdbmp_.$(OBJEXT) rdbmp_.lo rdcolmap_.$(OBJEXT) rdcolmap_.lo \
-rdgif_.$(OBJEXT) rdgif_.lo rdjpgcom_.$(OBJEXT) rdjpgcom_.lo \
-rdppm_.$(OBJEXT) rdppm_.lo rdrle_.$(OBJEXT) rdrle_.lo \
-rdswitch_.$(OBJEXT) rdswitch_.lo rdtarga_.$(OBJEXT) rdtarga_.lo \
-transupp_.$(OBJEXT) transupp_.lo wrbmp_.$(OBJEXT) wrbmp_.lo \
-wrgif_.$(OBJEXT) wrgif_.lo wrjpgcom_.$(OBJEXT) wrjpgcom_.lo \
-wrppm_.$(OBJEXT) wrppm_.lo wrrle_.$(OBJEXT) wrrle_.lo \
-wrtarga_.$(OBJEXT) wrtarga_.lo : $(ANSI2KNR)
 
 mostlyclean-libtool:
 	-rm -f *.lo
@@ -818,11 +702,18 @@
 	-rm -f libtool config.lt
 install-man1: $(man_MANS)
 	@$(NORMAL_INSTALL)
-	test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)"
-	@list=''; test -n "$(man1dir)" || exit 0; \
-	{ for i in $$list; do echo "$$i"; done; \
-	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
-	  sed -n '/\.1[a-z]*$$/p'; \
+	@list1=''; \
+	list2='$(man_MANS)'; \
+	test -n "$(man1dir)" \
+	  && test -n "`echo $$list1$$list2`" \
+	  || exit 0; \
+	echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
+	$(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
+	{ for i in $$list1; do echo "$$i"; done;  \
+	if test -n "$$list2"; then \
+	  for i in $$list2; do echo "$$i"; done \
+	    | sed -n '/\.1[a-z]*$$/p'; \
+	fi; \
 	} | while read p; do \
 	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
 	  echo "$$d$$p"; echo "$$p"; \
@@ -854,8 +745,11 @@
 	dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
 install-includeHEADERS: $(include_HEADERS)
 	@$(NORMAL_INSTALL)
-	test -z "$(includedir)" || $(MKDIR_P) "$(DESTDIR)$(includedir)"
 	@list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(includedir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(includedir)" || exit 1; \
+	fi; \
 	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 	  echo "$$d$$p"; \
@@ -871,26 +765,15 @@
 	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
 	dir='$(DESTDIR)$(includedir)'; $(am__uninstall_files_from_dir)
 
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	mkid -fID $$unique
-tags: TAGS
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-am
+TAGS: tags
 
-TAGS:  $(HEADERS) $(SOURCES) jconfig.cfg $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
 	set x; \
 	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS) jconfig.cfg $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	$(am__define_uniq_tagged_files); \
 	shift; \
 	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
@@ -902,15 +785,11 @@
 	      $$unique; \
 	  fi; \
 	fi
-ctags: CTAGS
-CTAGS:  $(HEADERS) $(SOURCES) jconfig.cfg $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	list='$(SOURCES) $(HEADERS) jconfig.cfg $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+ctags: ctags-am
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
 	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 	     $$unique
@@ -919,14 +798,36 @@
 	here=`$(am__cd) $(top_builddir) && pwd` \
 	  && $(am__cd) $(top_srcdir) \
 	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscope: cscope.files
+	test ! -s cscope.files \
+	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
+clean-cscope:
+	-rm -f cscope.files
+cscope.files: clean-cscope cscopelist
+cscopelist: cscopelist-am
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
 check-am: all-am
 	$(MAKE) $(AM_MAKEFLAGS) check-local
 check: check-am
-all-am: Makefile $(ANSI2KNR) $(LTLIBRARIES) $(PROGRAMS) $(MANS) \
-		$(HEADERS) jconfig.h
+all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(MANS) $(HEADERS) \
+		jconfig.h
 install-binPROGRAMS: install-libLTLIBRARIES
 
 installdirs:
@@ -966,8 +867,8 @@
 	@echo "it deletes files that may require special tools to rebuild."
 clean: clean-am
 
-clean-am: clean-binPROGRAMS clean-generic clean-krextra \
-	clean-libLTLIBRARIES clean-libtool mostlyclean-am
+clean-am: clean-binPROGRAMS clean-generic clean-libLTLIBRARIES \
+	clean-libtool mostlyclean-am
 
 distclean: distclean-am
 	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
@@ -1025,7 +926,7 @@
 
 mostlyclean: mostlyclean-am
 
-mostlyclean-am: mostlyclean-compile mostlyclean-generic mostlyclean-kr \
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
 	mostlyclean-libtool
 
 pdf: pdf-am
@@ -1043,22 +944,22 @@
 
 .MAKE: all check-am install-am install-strip
 
-.PHONY: CTAGS GTAGS all all-am am--refresh check check-am check-local \
-	clean clean-binPROGRAMS clean-generic clean-krextra \
-	clean-libLTLIBRARIES clean-libtool ctags distclean \
-	distclean-compile distclean-generic distclean-hdr \
-	distclean-libtool distclean-tags dvi dvi-am html html-am info \
-	info-am install install-am install-binPROGRAMS install-data \
-	install-data-am install-data-local install-dvi install-dvi-am \
-	install-exec install-exec-am install-html install-html-am \
-	install-includeHEADERS install-info install-info-am \
-	install-libLTLIBRARIES install-man install-man1 install-pdf \
-	install-pdf-am install-ps install-ps-am install-strip \
-	installcheck installcheck-am installdirs maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-compile \
-	mostlyclean-generic mostlyclean-kr mostlyclean-libtool pdf \
-	pdf-am ps ps-am tags uninstall uninstall-am \
-	uninstall-binPROGRAMS uninstall-includeHEADERS \
+.PHONY: CTAGS GTAGS TAGS all all-am am--refresh check check-am \
+	check-local clean clean-binPROGRAMS clean-cscope clean-generic \
+	clean-libLTLIBRARIES clean-libtool cscope cscopelist-am ctags \
+	ctags-am distclean distclean-compile distclean-generic \
+	distclean-hdr distclean-libtool distclean-tags dvi dvi-am html \
+	html-am info info-am install install-am install-binPROGRAMS \
+	install-data install-data-am install-data-local install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-includeHEADERS install-info \
+	install-info-am install-libLTLIBRARIES install-man \
+	install-man1 install-pdf install-pdf-am install-ps \
+	install-ps-am install-strip installcheck installcheck-am \
+	installdirs maintainer-clean maintainer-clean-generic \
+	mostlyclean mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
+	uninstall-am uninstall-binPROGRAMS uninstall-includeHEADERS \
 	uninstall-libLTLIBRARIES uninstall-local uninstall-man \
 	uninstall-man1
 
diff --git a/README b/README
index 0a23c19..fc5ca5d 100644
--- a/README
+++ b/README
@@ -1,10 +1,10 @@
 The Independent JPEG Group's JPEG software
 ==========================================
 
-README for release 8d of 15-Jan-2012
-====================================
+README for release 9 of 13-Jan-2013
+===================================
 
-This distribution contains the eighth public release of the Independent JPEG
+This distribution contains the ninth public release of the Independent JPEG
 Group's free JPEG software.  You are welcome to redistribute this software and
 to use it for any purpose, subject to the conditions under LEGAL ISSUES, below.
 
@@ -115,7 +115,7 @@
 fitness for a particular purpose.  This software is provided "AS IS", and you,
 its user, assume the entire risk as to its quality and accuracy.
 
-This software is copyright (C) 1991-2012, Thomas G. Lane, Guido Vollbeding.
+This software is copyright (C) 1991-2013, Thomas G. Lane, Guido Vollbeding.
 All Rights Reserved except as specified below.
 
 Permission is hereby granted to use, copy, modify, and distribute this
@@ -146,15 +146,6 @@
 assumed by the product vendor.
 
 
-ansi2knr.c is included in this distribution by permission of L. Peter Deutsch,
-sole proprietor of its copyright holder, Aladdin Enterprises of Menlo Park, CA.
-ansi2knr.c is NOT covered by the above copyright and conditions, but instead
-by the usual distribution terms of the Free Software Foundation; principally,
-that you must include source code if you redistribute it.  (See the file
-ansi2knr.c for full details.)  However, since ansi2knr.c is not needed as part
-of any program generated from the IJG code, this does not limit you more than
-the foregoing paragraphs do.
-
 The Unix configuration script "configure" was produced with GNU Autoconf.
 It is copyright by the Free Software Foundation but is freely distributable.
 The same holds for its supporting scripts (config.guess, config.sub,
@@ -222,12 +213,16 @@
 10918-1, ITU-T T.81.  Part 2 is titled "Digital Compression and Coding of
 Continuous-tone Still Images, Part 2: Compliance testing" and has document
 numbers ISO/IEC IS 10918-2, ITU-T T.83.
-IJG JPEG 8 introduces an implementation of the JPEG SmartScale extension
+IJG JPEG 8 introduced an implementation of the JPEG SmartScale extension
 which is specified in two documents:  A contributed document at ITU and ISO
 with title "ITU-T JPEG-Plus Proposal for Extending ITU-T T.81 for Advanced
 Image Coding", April 2006, Geneva, Switzerland.  The latest version of this
 document is Revision 3.  And a contributed document ISO/IEC JTC1/SC29/WG1 N
 5799 with title "Evolution of JPEG", June/July 2011, Berlin, Germany.
+IJG JPEG 9 introduces a reversible color transform for improved lossless
+compression which is described in a contributed document ISO/IEC JTC1/SC29/
+WG1 N 6080 with title "JPEG 9 Lossless Coding", June/July 2012, Paris,
+France.
 
 The JPEG standard does not specify all details of an interchangeable file
 format.  For the omitted details we follow the "JFIF" conventions, revision
@@ -257,8 +252,8 @@
 The "official" archive site for this software is www.ijg.org.
 The most recent released version can always be found there in
 directory "files".  This particular version will be archived as
-http://www.ijg.org/files/jpegsrc.v8d.tar.gz, and in Windows-compatible
-"zip" archive format as http://www.ijg.org/files/jpegsr8d.zip.
+http://www.ijg.org/files/jpegsrc.v9.tar.gz, and in Windows-compatible
+"zip" archive format as http://www.ijg.org/files/jpegsr9.zip.
 
 The JPEG FAQ (Frequently Asked Questions) article is a source of some
 general information about JPEG.
@@ -331,20 +326,24 @@
 JPEG" in their public reports which is not true because they don't respond to
 actual requirements for the maintenance of the original JPEG specification.
 
-There are currently distributions in circulation containing the name
-"libjpeg" which claim to be a "derivative" or "fork" of the original
-libjpeg, but don't have the features and are incompatible with formats
-supported by actual IJG libjpeg distributions.  Furthermore, they
-violate the license conditions as described under LEGAL ISSUES above.
-We have no sympathy for the release of misleading and illegal
-distributions derived from obsolete code bases.
+There are currently different distributions in circulation containing the
+name "libjpeg" which is misleading because they don't have the features and
+are incompatible with formats supported by actual IJG libjpeg distributions.
+One of those fakes is released by members of the ISO committee and just uses
+the name of libjpeg for misdirection of people, similar to the abuse of the
+name JPEG as described above, while having nothing in common with actual IJG
+libjpeg distributions.
+The other one claims to be a "derivative" or "fork" of the original libjpeg
+and violates the license conditions as described under LEGAL ISSUES above.
+We have no sympathy for the release of misleading and illegal distributions
+derived from obsolete code bases.
 Don't use an obsolete code base!
 
 
 TO DO
 =====
 
-Version 8 is the first release of a new generation JPEG standard
+Version 9 is the second release of a new generation JPEG standard
 to overcome the limitations of the original JPEG specification.
 More features are being prepared for coming releases...
 
diff --git a/aclocal.m4 b/aclocal.m4
index 9b38b97..9f63e17 100644
--- a/aclocal.m4
+++ b/aclocal.m4
@@ -1,8 +1,7 @@
-# generated automatically by aclocal 1.11.2 -*- Autoconf -*-
+# generated automatically by aclocal 1.13.1 -*- Autoconf -*-
 
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software Foundation,
-# Inc.
+# Copyright (C) 1996-2012 Free Software Foundation, Inc.
+
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -12,13 +11,14 @@
 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
 # PARTICULAR PURPOSE.
 
+m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])])
 m4_ifndef([AC_AUTOCONF_VERSION],
   [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.68],,
-[m4_warning([this file was generated for autoconf 2.68.
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],,
+[m4_warning([this file was generated for autoconf 2.69.
 You have another version of autoconf.  It may work, but is not guaranteed to.
 If you have problems, you may need to regenerate the build system entirely.
-To do so, use the procedure documented by the package, typically `autoreconf'.])])
+To do so, use the procedure documented by the package, typically 'autoreconf'.])])
 
 # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
 #
@@ -8607,25 +8607,22 @@
 m4_ifndef([_LT_PROG_FC],		[AC_DEFUN([_LT_PROG_FC])])
 m4_ifndef([_LT_PROG_CXX],		[AC_DEFUN([_LT_PROG_CXX])])
 
-# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008, 2011 Free Software
-# Foundation, Inc.
+# Copyright (C) 2002-2013 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 1
-
 # AM_AUTOMAKE_VERSION(VERSION)
 # ----------------------------
 # Automake X.Y traces this macro to ensure aclocal.m4 has been
 # generated from the m4 files accompanying Automake X.Y.
 # (This private macro should not be called outside this file.)
 AC_DEFUN([AM_AUTOMAKE_VERSION],
-[am__api_version='1.11'
+[am__api_version='1.13'
 dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
 dnl require some minimum version.  Point them to the right macro.
-m4_if([$1], [1.11.2], [],
+m4_if([$1], [1.13.1], [],
       [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
 ])
 
@@ -8641,24 +8638,81 @@
 # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
 # This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
 AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.11.2])dnl
+[AM_AUTOMAKE_VERSION([1.13.1])dnl
 m4_ifndef([AC_AUTOCONF_VERSION],
   [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
 _AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
 
-# AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
-
-# Copyright (C) 2001, 2003, 2005, 2011 Free Software Foundation, Inc.
+# Copyright (C) 2011-2013 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 1
+# AM_PROG_AR([ACT-IF-FAIL])
+# -------------------------
+# Try to determine the archiver interface, and trigger the ar-lib wrapper
+# if it is needed.  If the detection of archiver interface fails, run
+# ACT-IF-FAIL (default is to abort configure with a proper error message).
+AC_DEFUN([AM_PROG_AR],
+[AC_BEFORE([$0], [LT_INIT])dnl
+AC_BEFORE([$0], [AC_PROG_LIBTOOL])dnl
+AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([ar-lib])dnl
+AC_CHECK_TOOLS([AR], [ar lib "link -lib"], [false])
+: ${AR=ar}
+
+AC_CACHE_CHECK([the archiver ($AR) interface], [am_cv_ar_interface],
+  [am_cv_ar_interface=ar
+   AC_COMPILE_IFELSE([AC_LANG_SOURCE([[int some_variable = 0;]])],
+     [am_ar_try='$AR cru libconftest.a conftest.$ac_objext >&AS_MESSAGE_LOG_FD'
+      AC_TRY_EVAL([am_ar_try])
+      if test "$ac_status" -eq 0; then
+        am_cv_ar_interface=ar
+      else
+        am_ar_try='$AR -NOLOGO -OUT:conftest.lib conftest.$ac_objext >&AS_MESSAGE_LOG_FD'
+        AC_TRY_EVAL([am_ar_try])
+        if test "$ac_status" -eq 0; then
+          am_cv_ar_interface=lib
+        else
+          am_cv_ar_interface=unknown
+        fi
+      fi
+      rm -f conftest.lib libconftest.a
+     ])
+   ])
+
+case $am_cv_ar_interface in
+ar)
+  ;;
+lib)
+  # Microsoft lib, so override with the ar-lib wrapper script.
+  # FIXME: It is wrong to rewrite AR.
+  # But if we don't then we get into trouble of one sort or another.
+  # A longer-term fix would be to have automake use am__AR in this case,
+  # and then we could set am__AR="$am_aux_dir/ar-lib \$(AR)" or something
+  # similar.
+  AR="$am_aux_dir/ar-lib $AR"
+  ;;
+unknown)
+  m4_default([$1],
+             [AC_MSG_ERROR([could not determine $AR interface])])
+  ;;
+esac
+AC_SUBST([AR])dnl
+])
+
+# AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
+
+# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
 
 # For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
-# $ac_aux_dir to `$srcdir/foo'.  In other projects, it is set to
-# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
+# $ac_aux_dir to '$srcdir/foo'.  In other projects, it is set to
+# '$srcdir', '$srcdir/..', or '$srcdir/../..'.
 #
 # Of course, Automake must honor this variable whenever it calls a
 # tool from the auxiliary directory.  The problem is that $srcdir (and
@@ -8677,7 +8731,7 @@
 #
 # The reason of the latter failure is that $top_srcdir and $ac_aux_dir
 # are both prefixed by $srcdir.  In an in-source build this is usually
-# harmless because $srcdir is `.', but things will broke when you
+# harmless because $srcdir is '.', but things will broke when you
 # start a VPATH build or use an absolute $srcdir.
 #
 # So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
@@ -8703,22 +8757,19 @@
 
 # AM_CONDITIONAL                                            -*- Autoconf -*-
 
-# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008
-# Free Software Foundation, Inc.
+# Copyright (C) 1997-2013 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 9
-
 # AM_CONDITIONAL(NAME, SHELL-CONDITION)
 # -------------------------------------
 # Define a conditional.
 AC_DEFUN([AM_CONDITIONAL],
-[AC_PREREQ(2.52)dnl
- ifelse([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
-	[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+[AC_PREREQ([2.52])dnl
+ m4_if([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
+       [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
 AC_SUBST([$1_TRUE])dnl
 AC_SUBST([$1_FALSE])dnl
 _AM_SUBST_NOTMAKE([$1_TRUE])dnl
@@ -8737,16 +8788,14 @@
 Usually this means the macro was only invoked conditionally.]])
 fi])])
 
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009,
-# 2010, 2011 Free Software Foundation, Inc.
+# Copyright (C) 1999-2013 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 12
 
-# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
+# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be
 # written in clear, in which case automake, when reading aclocal.m4,
 # will think it sees a *use*, and therefore will trigger all it's
 # C support machinery.  Also note that it means that autoscan, seeing
@@ -8756,7 +8805,7 @@
 # _AM_DEPENDENCIES(NAME)
 # ----------------------
 # See how the compiler implements dependency checking.
-# NAME is "CC", "CXX", "GCJ", or "OBJC".
+# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC".
 # We try a few techniques and use that to set a single cache variable.
 #
 # We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
@@ -8769,12 +8818,13 @@
 AC_REQUIRE([AM_MAKE_INCLUDE])dnl
 AC_REQUIRE([AM_DEP_TRACK])dnl
 
-ifelse([$1], CC,   [depcc="$CC"   am_compiler_list=],
-       [$1], CXX,  [depcc="$CXX"  am_compiler_list=],
-       [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
-       [$1], UPC,  [depcc="$UPC"  am_compiler_list=],
-       [$1], GCJ,  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
-                   [depcc="$$1"   am_compiler_list=])
+m4_if([$1], [CC],   [depcc="$CC"   am_compiler_list=],
+      [$1], [CXX],  [depcc="$CXX"  am_compiler_list=],
+      [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+      [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'],
+      [$1], [UPC],  [depcc="$UPC"  am_compiler_list=],
+      [$1], [GCJ],  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
+                    [depcc="$$1"   am_compiler_list=])
 
 AC_CACHE_CHECK([dependency style of $depcc],
                [am_cv_$1_dependencies_compiler_type],
@@ -8782,8 +8832,8 @@
   # We make a subdir and do the tests there.  Otherwise we can end up
   # making bogus files that we don't know about and never remove.  For
   # instance it was reported that on HP-UX the gcc test will end up
-  # making a dummy file named `D' -- because `-MD' means `put the output
-  # in D'.
+  # making a dummy file named 'D' -- because '-MD' means "put the output
+  # in D".
   rm -rf conftest.dir
   mkdir conftest.dir
   # Copy depcomp to subdir because otherwise we won't find it if we're
@@ -8823,16 +8873,16 @@
     : > sub/conftest.c
     for i in 1 2 3 4 5 6; do
       echo '#include "conftst'$i'.h"' >> sub/conftest.c
-      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
-      # Solaris 8's {/usr,}/bin/sh.
-      touch sub/conftst$i.h
+      # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+      # Solaris 10 /bin/sh.
+      echo '/* dummy */' > sub/conftst$i.h
     done
     echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
 
-    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # We check with '-c' and '-o' for the sake of the "dashmstdout"
     # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle `-M -o', and we need to detect this.  Also, some Intel
-    # versions had trouble with output in subdirs
+    # handle '-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs.
     am__obj=sub/conftest.${OBJEXT-o}
     am__minus_obj="-o $am__obj"
     case $depmode in
@@ -8841,8 +8891,8 @@
       test "$am__universal" = false || continue
       ;;
     nosideeffect)
-      # after this tag, mechanisms are not by side-effect, so they'll
-      # only be used when explicitly requested
+      # After this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested.
       if test "x$enable_dependency_tracking" = xyes; then
 	continue
       else
@@ -8850,7 +8900,7 @@
       fi
       ;;
     msvc7 | msvc7msys | msvisualcpp | msvcmsys)
-      # This compiler won't grok `-c -o', but also, the minuso test has
+      # This compiler won't grok '-c -o', but also, the minuso test has
       # not run yet.  These depmodes are late enough in the game, and
       # so weak that their functioning should not be impacted.
       am__obj=conftest.${OBJEXT-o}
@@ -8898,7 +8948,7 @@
 # AM_SET_DEPDIR
 # -------------
 # Choose a directory name for dependency files.
-# This macro is AC_REQUIREd in _AM_DEPENDENCIES
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES.
 AC_DEFUN([AM_SET_DEPDIR],
 [AC_REQUIRE([AM_SET_LEADING_DOT])dnl
 AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
@@ -8908,9 +8958,13 @@
 # AM_DEP_TRACK
 # ------------
 AC_DEFUN([AM_DEP_TRACK],
-[AC_ARG_ENABLE(dependency-tracking,
-[  --disable-dependency-tracking  speeds up one-time build
-  --enable-dependency-tracking   do not reject slow dependency extractors])
+[AC_ARG_ENABLE([dependency-tracking], [dnl
+AS_HELP_STRING(
+  [--enable-dependency-tracking],
+  [do not reject slow dependency extractors])
+AS_HELP_STRING(
+  [--disable-dependency-tracking],
+  [speeds up one-time build])])
 if test "x$enable_dependency_tracking" != xno; then
   am_depcomp="$ac_aux_dir/depcomp"
   AMDEPBACKSLASH='\'
@@ -8925,20 +8979,18 @@
 
 # Generate code to set up dependency tracking.              -*- Autoconf -*-
 
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008
-# Free Software Foundation, Inc.
+# Copyright (C) 1999-2013 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-#serial 5
 
 # _AM_OUTPUT_DEPENDENCY_COMMANDS
 # ------------------------------
 AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
 [{
-  # Autoconf 2.62 quotes --file arguments for eval, but not when files
+  # Older Autoconf quotes --file arguments for eval, but not when files
   # are listed without --file.  Let's play safe and only enable the eval
   # if we detect the quoting.
   case $CONFIG_FILES in
@@ -8951,7 +9003,7 @@
     # Strip MF so we end up with the name of the file.
     mf=`echo "$mf" | sed -e 's/:.*$//'`
     # Check whether this is an Automake generated Makefile or not.
-    # We used to match only the files named `Makefile.in', but
+    # We used to match only the files named 'Makefile.in', but
     # some people rename them; so instead we look at the file content.
     # Grep'ing the first line is not enough: some people post-process
     # each Makefile.in and add a new line on top of each file to say so.
@@ -8963,21 +9015,19 @@
       continue
     fi
     # Extract the definition of DEPDIR, am__include, and am__quote
-    # from the Makefile without running `make'.
+    # from the Makefile without running 'make'.
     DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
     test -z "$DEPDIR" && continue
     am__include=`sed -n 's/^am__include = //p' < "$mf"`
     test -z "am__include" && continue
     am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
-    # When using ansi2knr, U may be empty or an underscore; expand it
-    U=`sed -n 's/^U = //p' < "$mf"`
     # Find all dependency output files, they are included files with
     # $(DEPDIR) in their names.  We invoke sed twice because it is the
     # simplest approach to changing $(DEPDIR) to its actual value in the
     # expansion.
     for file in `sed -n "
       s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
-	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
       # Make sure the directory exists.
       test -f "$dirpart/$file" && continue
       fdir=`AS_DIRNAME(["$file"])`
@@ -8995,7 +9045,7 @@
 # This macro should only be invoked once -- use via AC_REQUIRE.
 #
 # This code is only required when automatic dependency tracking
-# is enabled.  FIXME.  This creates each `.P' file that we will
+# is enabled.  FIXME.  This creates each '.P' file that we will
 # need in order to bootstrap the dependency handling code.
 AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
 [AC_CONFIG_COMMANDS([depfiles],
@@ -9005,15 +9055,12 @@
 
 # Do all the work for Automake.                             -*- Autoconf -*-
 
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006, 2008, 2009 Free Software Foundation, Inc.
+# Copyright (C) 1996-2013 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 16
-
 # This macro actually does too much.  Some checks are only needed if
 # your package does certain things.  But this isn't really a big deal.
 
@@ -9029,7 +9076,7 @@
 # arguments mandatory, and then we can depend on a new Autoconf
 # release and drop the old call support.
 AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_PREREQ([2.62])dnl
+[AC_PREREQ([2.65])dnl
 dnl Autoconf wants to disallow AM_ names.  We explicitly allow
 dnl the ones we care about.
 m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
@@ -9058,31 +9105,40 @@
 # Define the identity of the package.
 dnl Distinguish between old-style and new-style calls.
 m4_ifval([$2],
-[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+[AC_DIAGNOSE([obsolete],
+             [$0: two- and three-arguments forms are deprecated.])
+m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
  AC_SUBST([PACKAGE], [$1])dnl
  AC_SUBST([VERSION], [$2])],
 [_AM_SET_OPTIONS([$1])dnl
 dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
-m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
+m4_if(
+  m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]),
+  [ok:ok],,
   [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
  AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
  AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
 
 _AM_IF_OPTION([no-define],,
-[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
- AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
+[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package])
+ AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl
 
 # Some tools Automake needs.
 AC_REQUIRE([AM_SANITY_CHECK])dnl
 AC_REQUIRE([AC_ARG_PROGRAM])dnl
-AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
-AM_MISSING_PROG(AUTOCONF, autoconf)
-AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
-AM_MISSING_PROG(AUTOHEADER, autoheader)
-AM_MISSING_PROG(MAKEINFO, makeinfo)
+AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}])
+AM_MISSING_PROG([AUTOCONF], [autoconf])
+AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}])
+AM_MISSING_PROG([AUTOHEADER], [autoheader])
+AM_MISSING_PROG([MAKEINFO], [makeinfo])
 AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
 AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
-AC_REQUIRE([AM_PROG_MKDIR_P])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+# For better backward compatibility.  To be removed once Automake 1.9.x
+# dies out for good.  For more background, see:
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
+AC_SUBST([mkdir_p], ['$(MKDIR_P)'])
 # We need awk for the "check" target.  The system "awk" is bad on
 # some platforms.
 AC_REQUIRE([AC_PROG_AWK])dnl
@@ -9093,28 +9149,32 @@
 			     [_AM_PROG_TAR([v7])])])
 _AM_IF_OPTION([no-dependencies],,
 [AC_PROVIDE_IFELSE([AC_PROG_CC],
-		  [_AM_DEPENDENCIES(CC)],
-		  [define([AC_PROG_CC],
-			  defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
+		  [_AM_DEPENDENCIES([CC])],
+		  [m4_define([AC_PROG_CC],
+			     m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl
 AC_PROVIDE_IFELSE([AC_PROG_CXX],
-		  [_AM_DEPENDENCIES(CXX)],
-		  [define([AC_PROG_CXX],
-			  defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+		  [_AM_DEPENDENCIES([CXX])],
+		  [m4_define([AC_PROG_CXX],
+			     m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl
 AC_PROVIDE_IFELSE([AC_PROG_OBJC],
-		  [_AM_DEPENDENCIES(OBJC)],
-		  [define([AC_PROG_OBJC],
-			  defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
+		  [_AM_DEPENDENCIES([OBJC])],
+		  [m4_define([AC_PROG_OBJC],
+			     m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJCXX],
+		  [_AM_DEPENDENCIES([OBJCXX])],
+		  [m4_define([AC_PROG_OBJCXX],
+			     m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl
 ])
-_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl
-dnl The `parallel-tests' driver may need to know about EXEEXT, so add the
-dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen.  This macro
-dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.
+AC_REQUIRE([AM_SILENT_RULES])dnl
+dnl The testsuite driver may need to know about EXEEXT, so add the
+dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen.  This
+dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below.
 AC_CONFIG_COMMANDS_PRE(dnl
 [m4_provide_if([_AM_COMPILER_EXEEXT],
   [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
 ])
 
-dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion.  Do not
+dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion.  Do not
 dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
 dnl mangled by Autoconf and run in a shell conditional statement.
 m4_define([_AC_COMPILER_EXEEXT],
@@ -9142,15 +9202,12 @@
 done
 echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
 
-# Copyright (C) 2001, 2003, 2005, 2008, 2011 Free Software Foundation,
-# Inc.
+# Copyright (C) 2001-2013 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 1
-
 # AM_PROG_INSTALL_SH
 # ------------------
 # Define $install_sh.
@@ -9164,16 +9221,14 @@
     install_sh="\${SHELL} $am_aux_dir/install-sh"
   esac
 fi
-AC_SUBST(install_sh)])
+AC_SUBST([install_sh])])
 
-# Copyright (C) 2003, 2005  Free Software Foundation, Inc.
+# Copyright (C) 2003-2013 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 2
-
 # Check whether the underlying file-system supports filenames
 # with a leading dot.  For instance MS-DOS doesn't.
 AC_DEFUN([AM_SET_LEADING_DOT],
@@ -9190,20 +9245,17 @@
 # Add --enable-maintainer-mode option to configure.         -*- Autoconf -*-
 # From Jim Meyering
 
-# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005, 2008,
-# 2011 Free Software Foundation, Inc.
+# Copyright (C) 1996-2013 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 5
-
 # AM_MAINTAINER_MODE([DEFAULT-MODE])
 # ----------------------------------
 # Control maintainer-specific portions of Makefiles.
-# Default is to disable them, unless `enable' is passed literally.
-# For symmetry, `disable' may be passed as well.  Anyway, the user
+# Default is to disable them, unless 'enable' is passed literally.
+# For symmetry, 'disable' may be passed as well.  Anyway, the user
 # can override the default with the --enable/--disable switch.
 AC_DEFUN([AM_MAINTAINER_MODE],
 [m4_case(m4_default([$1], [disable]),
@@ -9214,10 +9266,11 @@
 AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
   dnl maintainer-mode's default is 'disable' unless 'enable' is passed
   AC_ARG_ENABLE([maintainer-mode],
-[  --][am_maintainer_other][-maintainer-mode  am_maintainer_other make rules and dependencies not useful
-			  (and sometimes confusing) to the casual installer],
-      [USE_MAINTAINER_MODE=$enableval],
-      [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes]))
+    [AS_HELP_STRING([--]am_maintainer_other[-maintainer-mode],
+      am_maintainer_other[ make rules and dependencies not useful
+      (and sometimes confusing) to the casual installer])],
+    [USE_MAINTAINER_MODE=$enableval],
+    [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes]))
   AC_MSG_RESULT([$USE_MAINTAINER_MODE])
   AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes])
   MAINT=$MAINTAINER_MODE_TRUE
@@ -9225,18 +9278,14 @@
 ]
 )
 
-AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE])
-
 # Check to see how 'make' treats includes.	            -*- Autoconf -*-
 
-# Copyright (C) 2001, 2002, 2003, 2005, 2009  Free Software Foundation, Inc.
+# Copyright (C) 2001-2013 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 4
-
 # AM_MAKE_INCLUDE()
 # -----------------
 # Check to see how make treats includes.
@@ -9254,7 +9303,7 @@
 _am_result=none
 # First try GNU make style include.
 echo "include confinc" > confmf
-# Ignore all kinds of additional output from `make'.
+# Ignore all kinds of additional output from 'make'.
 case `$am_make -s -f confmf 2> /dev/null` in #(
 *the\ am__doit\ target*)
   am__include=include
@@ -9281,15 +9330,12 @@
 
 # Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
 
-# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008
-# Free Software Foundation, Inc.
+# Copyright (C) 1997-2013 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 6
-
 # AM_MISSING_PROG(NAME, PROGRAM)
 # ------------------------------
 AC_DEFUN([AM_MISSING_PROG],
@@ -9297,11 +9343,10 @@
 $1=${$1-"${am_missing_run}$2"}
 AC_SUBST($1)])
 
-
 # AM_MISSING_HAS_RUN
 # ------------------
-# Define MISSING if not defined so far and test if it supports --run.
-# If it does, set am_missing_run to use it, otherwise, to nothing.
+# Define MISSING if not defined so far and test if it is modern enough.
+# If it is, set am_missing_run to use it, otherwise, to nothing.
 AC_DEFUN([AM_MISSING_HAS_RUN],
 [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
 AC_REQUIRE_AUX_FILE([missing])dnl
@@ -9314,54 +9359,22 @@
   esac
 fi
 # Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
-  am_missing_run="$MISSING --run "
+if eval "$MISSING --is-lightweight"; then
+  am_missing_run="$MISSING "
 else
   am_missing_run=
-  AC_MSG_WARN([`missing' script is too old or missing])
+  AC_MSG_WARN(['missing' script is too old or missing])
 fi
 ])
 
-# Copyright (C) 2003, 2004, 2005, 2006, 2011 Free Software Foundation,
-# Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 1
-
-# AM_PROG_MKDIR_P
-# ---------------
-# Check for `mkdir -p'.
-AC_DEFUN([AM_PROG_MKDIR_P],
-[AC_PREREQ([2.60])dnl
-AC_REQUIRE([AC_PROG_MKDIR_P])dnl
-dnl Automake 1.8 to 1.9.6 used to define mkdir_p.  We now use MKDIR_P,
-dnl while keeping a definition of mkdir_p for backward compatibility.
-dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
-dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
-dnl Makefile.ins that do not define MKDIR_P, so we do our own
-dnl adjustment using top_builddir (which is defined more often than
-dnl MKDIR_P).
-AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
-case $mkdir_p in
-  [[\\/$]]* | ?:[[\\/]]*) ;;
-  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
-esac
-])
-
 # Helper functions for option handling.                     -*- Autoconf -*-
 
-# Copyright (C) 2001, 2002, 2003, 2005, 2008, 2010 Free Software
-# Foundation, Inc.
+# Copyright (C) 2001-2013 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 5
-
 # _AM_MANGLE_OPTION(NAME)
 # -----------------------
 AC_DEFUN([_AM_MANGLE_OPTION],
@@ -9371,7 +9384,7 @@
 # --------------------
 # Set option NAME.  Presently that only means defining a flag for this option.
 AC_DEFUN([_AM_SET_OPTION],
-[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
+[m4_define(_AM_MANGLE_OPTION([$1]), [1])])
 
 # _AM_SET_OPTIONS(OPTIONS)
 # ------------------------
@@ -9385,52 +9398,18 @@
 AC_DEFUN([_AM_IF_OPTION],
 [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
 
-# Copyright (C) 1996, 1997, 1998, 2000, 2001, 2002, 2003, 2005, 2006
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 5
-
-AC_DEFUN([AM_C_PROTOTYPES],
-[AC_REQUIRE([AC_C_PROTOTYPES])
-AC_DIAGNOSE([obsolete],
-            [$0: automatic de-ANSI-fication support is deprecated])
-if test "$ac_cv_prog_cc_stdc" != no; then
-  U= ANSI2KNR=
-else
-  U=_ ANSI2KNR=./ansi2knr
-fi
-# Ensure some checks needed by ansi2knr itself.
-AC_REQUIRE([AC_HEADER_STDC])
-AC_CHECK_HEADERS([string.h])
-AC_SUBST([U])dnl
-AC_SUBST([ANSI2KNR])dnl
-_AM_SUBST_NOTMAKE([ANSI2KNR])dnl
-])
-
-AU_DEFUN([fp_C_PROTOTYPES], [AM_C_PROTOTYPES])
-
 # Check to make sure that the build environment is sane.    -*- Autoconf -*-
 
-# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008
-# Free Software Foundation, Inc.
+# Copyright (C) 1996-2013 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 5
-
 # AM_SANITY_CHECK
 # ---------------
 AC_DEFUN([AM_SANITY_CHECK],
 [AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftest.file
 # Reject unsafe characters in $srcdir or the absolute working directory
 # name.  Accept space and tab only in the latter.
 am_lf='
@@ -9441,32 +9420,40 @@
 esac
 case $srcdir in
   *[[\\\"\#\$\&\'\`$am_lf\ \	]]*)
-    AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);;
+    AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);;
 esac
 
-# Do `set' in a subshell so we don't clobber the current shell's
+# Do 'set' in a subshell so we don't clobber the current shell's
 # arguments.  Must try -L first in case configure is actually a
 # symlink; some systems play weird games with the mod time of symlinks
 # (eg FreeBSD returns the mod time of the symlink's containing
 # directory).
 if (
-   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
-   if test "$[*]" = "X"; then
-      # -L didn't work.
-      set X `ls -t "$srcdir/configure" conftest.file`
-   fi
-   rm -f conftest.file
-   if test "$[*]" != "X $srcdir/configure conftest.file" \
-      && test "$[*]" != "X conftest.file $srcdir/configure"; then
+   am_has_slept=no
+   for am_try in 1 2; do
+     echo "timestamp, slept: $am_has_slept" > conftest.file
+     set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+     if test "$[*]" = "X"; then
+	# -L didn't work.
+	set X `ls -t "$srcdir/configure" conftest.file`
+     fi
+     if test "$[*]" != "X $srcdir/configure conftest.file" \
+	&& test "$[*]" != "X conftest.file $srcdir/configure"; then
 
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
+	# If neither matched, then we have a broken ls.  This can happen
+	# if, for instance, CONFIG_SHELL is bash and it inherits a
+	# broken ls alias from the environment.  This has actually
+	# happened.  Such a system could not be considered "sane".
+	AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
+  alias in your environment])
+     fi
+     if test "$[2]" = conftest.file || test $am_try -eq 2; then
+       break
+     fi
+     # Just in case.
+     sleep 1
+     am_has_slept=yes
+   done
    test "$[2]" = conftest.file
    )
 then
@@ -9476,73 +9463,118 @@
    AC_MSG_ERROR([newly created file is older than distributed files!
 Check your system clock])
 fi
-AC_MSG_RESULT(yes)])
+AC_MSG_RESULT([yes])
+# If we didn't sleep, we still need to ensure time stamps of config.status and
+# generated files are strictly newer.
+am_sleep_pid=
+if grep 'slept: no' conftest.file >/dev/null 2>&1; then
+  ( sleep 1 ) &
+  am_sleep_pid=$!
+fi
+AC_CONFIG_COMMANDS_PRE(
+  [AC_MSG_CHECKING([that generated files are newer than configure])
+   if test -n "$am_sleep_pid"; then
+     # Hide warnings about reused PIDs.
+     wait $am_sleep_pid 2>/dev/null
+   fi
+   AC_MSG_RESULT([done])])
+rm -f conftest.file
+])
 
-# Copyright (C) 2009  Free Software Foundation, Inc.
+# Copyright (C) 2009-2013 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 1
-
 # AM_SILENT_RULES([DEFAULT])
 # --------------------------
 # Enable less verbose build rules; with the default set to DEFAULT
-# (`yes' being less verbose, `no' or empty being verbose).
+# ("yes" being less verbose, "no" or empty being verbose).
 AC_DEFUN([AM_SILENT_RULES],
-[AC_ARG_ENABLE([silent-rules],
-[  --enable-silent-rules          less verbose build output (undo: `make V=1')
-  --disable-silent-rules         verbose build output (undo: `make V=0')])
-case $enable_silent_rules in
-yes) AM_DEFAULT_VERBOSITY=0;;
-no)  AM_DEFAULT_VERBOSITY=1;;
-*)   AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);;
+[AC_ARG_ENABLE([silent-rules], [dnl
+AS_HELP_STRING(
+  [--enable-silent-rules],
+  [less verbose build output (undo: "make V=1")])
+AS_HELP_STRING(
+  [--disable-silent-rules],
+  [verbose build output (undo: "make V=0")])dnl
+])
+case $enable_silent_rules in @%:@ (((
+  yes) AM_DEFAULT_VERBOSITY=0;;
+   no) AM_DEFAULT_VERBOSITY=1;;
+    *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);;
 esac
+dnl
+dnl A few 'make' implementations (e.g., NonStop OS and NextStep)
+dnl do not support nested variable expansions.
+dnl See automake bug#9928 and bug#10237.
+am_make=${MAKE-make}
+AC_CACHE_CHECK([whether $am_make supports nested variables],
+   [am_cv_make_support_nested_variables],
+   [if AS_ECHO([['TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+	@$(TRUE)
+.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then
+  am_cv_make_support_nested_variables=yes
+else
+  am_cv_make_support_nested_variables=no
+fi])
+if test $am_cv_make_support_nested_variables = yes; then
+  dnl Using '$V' instead of '$(V)' breaks IRIX make.
+  AM_V='$(V)'
+  AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+  AM_V=$AM_DEFAULT_VERBOSITY
+  AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+AC_SUBST([AM_V])dnl
+AM_SUBST_NOTMAKE([AM_V])dnl
+AC_SUBST([AM_DEFAULT_V])dnl
+AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl
 AC_SUBST([AM_DEFAULT_VERBOSITY])dnl
 AM_BACKSLASH='\'
 AC_SUBST([AM_BACKSLASH])dnl
 _AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl
 ])
 
-# Copyright (C) 2001, 2003, 2005, 2011 Free Software Foundation, Inc.
+# Copyright (C) 2001-2013 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 1
-
 # AM_PROG_INSTALL_STRIP
 # ---------------------
-# One issue with vendor `install' (even GNU) is that you can't
+# One issue with vendor 'install' (even GNU) is that you can't
 # specify the program used to strip binaries.  This is especially
 # annoying in cross-compiling environments, where the build's strip
 # is unlikely to handle the host's binaries.
 # Fortunately install-sh will honor a STRIPPROG variable, so we
-# always use install-sh in `make install-strip', and initialize
+# always use install-sh in "make install-strip", and initialize
 # STRIPPROG with the value of the STRIP variable (set by the user).
 AC_DEFUN([AM_PROG_INSTALL_STRIP],
 [AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'.  However `strip' might not be the right
+# Installed binaries are usually stripped using 'strip' when the user
+# run "make install-strip".  However 'strip' might not be the right
 # tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
-dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
+# will honor the 'STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be 'maybe'.
 if test "$cross_compiling" != no; then
   AC_CHECK_TOOL([STRIP], [strip], :)
 fi
 INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
 AC_SUBST([INSTALL_STRIP_PROGRAM])])
 
-# Copyright (C) 2006, 2008, 2010 Free Software Foundation, Inc.
+# Copyright (C) 2006-2013 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 3
-
 # _AM_SUBST_NOTMAKE(VARIABLE)
 # ---------------------------
 # Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
@@ -9556,18 +9588,16 @@
 
 # Check how to create a tarball.                            -*- Autoconf -*-
 
-# Copyright (C) 2004, 2005  Free Software Foundation, Inc.
+# Copyright (C) 2004-2013 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 2
-
 # _AM_PROG_TAR(FORMAT)
 # --------------------
 # Check how to create a tarball in format FORMAT.
-# FORMAT should be one of `v7', `ustar', or `pax'.
+# FORMAT should be one of 'v7', 'ustar', or 'pax'.
 #
 # Substitute a variable $(am__tar) that is a command
 # writing to stdout a FORMAT-tarball containing the directory
@@ -9578,10 +9608,11 @@
 # a tarball read from stdin.
 #     $(am__untar) < result.tar
 AC_DEFUN([_AM_PROG_TAR],
-[# Always define AMTAR for backward compatibility.
-AM_MISSING_PROG([AMTAR], [tar])
+[# Always define AMTAR for backward compatibility.  Yes, it's still used
+# in the wild :-(  We should find a proper way to deprecate it ...
+AC_SUBST([AMTAR], ['$${TAR-tar}'])
 m4_if([$1], [v7],
-     [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
+     [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
      [m4_case([$1], [ustar],, [pax],,
               [m4_fatal([Unknown tar format])])
 AC_MSG_CHECKING([how to create a $1 tar archive])
@@ -9589,7 +9620,7 @@
 _am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
 _am_tools=${am_cv_prog_tar_$1-$_am_tools}
 # Do not fold the above two line into one, because Tru64 sh and
-# Solaris sh will not grok spaces in the rhs of `-'.
+# Solaris sh will not grok spaces in the rhs of '-'.
 for _am_tool in $_am_tools
 do
   case $_am_tool in
diff --git a/ansi2knr.1 b/ansi2knr.1
deleted file mode 100644
index f9ee5a6..0000000
--- a/ansi2knr.1
+++ /dev/null
@@ -1,36 +0,0 @@
-.TH ANSI2KNR 1 "19 Jan 1996"
-.SH NAME
-ansi2knr \- convert ANSI C to Kernighan & Ritchie C
-.SH SYNOPSIS
-.I ansi2knr
-[--varargs] input_file [output_file]
-.SH DESCRIPTION
-If no output_file is supplied, output goes to stdout.
-.br
-There are no error messages.
-.sp
-.I ansi2knr
-recognizes function definitions by seeing a non-keyword identifier at the left
-margin, followed by a left parenthesis, with a right parenthesis as the last
-character on the line, and with a left brace as the first token on the
-following line (ignoring possible intervening comments).  It will recognize a
-multi-line header provided that no intervening line ends with a left or right
-brace or a semicolon.  These algorithms ignore whitespace and comments, except
-that the function name must be the first thing on the line.
-.sp
-The following constructs will confuse it:
-.br
-     - Any other construct that starts at the left margin and follows the
-above syntax (such as a macro or function call).
-.br
-     - Some macros that tinker with the syntax of the function header.
-.sp
-The --varargs switch is obsolete, and is recognized only for
-backwards compatibility.  The present version of
-.I ansi2knr
-will always attempt to convert a ... argument to va_alist and va_dcl.
-.SH AUTHOR
-L. Peter Deutsch <ghost@aladdin.com> wrote the original ansi2knr and
-continues to maintain the current version; most of the code in the current
-version is his work.  ansi2knr also includes contributions by Francois
-Pinard <pinard@iro.umontreal.ca> and Jim Avera <jima@netcom.com>.
diff --git a/ansi2knr.c b/ansi2knr.c
deleted file mode 100644
index e84c210..0000000
--- a/ansi2knr.c
+++ /dev/null
@@ -1,739 +0,0 @@
-/* Copyright (C) 1989, 2000 Aladdin Enterprises.  All rights reserved. */
-
-/*$Id: ansi2knr.c,v 1.14 2003/09/06 05:36:56 eggert Exp $*/
-/* Convert ANSI C function definitions to K&R ("traditional C") syntax */
-
-/*
-ansi2knr is distributed in the hope that it will be useful, but WITHOUT ANY
-WARRANTY.  No author or distributor accepts responsibility to anyone for the
-consequences of using it or for whether it serves any particular purpose or
-works at all, unless he says so in writing.  Refer to the GNU General Public
-License (the "GPL") for full details.
-
-Everyone is granted permission to copy, modify and redistribute ansi2knr,
-but only under the conditions described in the GPL.  A copy of this license
-is supposed to have been given to you along with ansi2knr so you can know
-your rights and responsibilities.  It should be in a file named COPYLEFT,
-or, if there is no file named COPYLEFT, a file named COPYING.  Among other
-things, the copyright notice and this notice must be preserved on all
-copies.
-
-We explicitly state here what we believe is already implied by the GPL: if
-the ansi2knr program is distributed as a separate set of sources and a
-separate executable file which are aggregated on a storage medium together
-with another program, this in itself does not bring the other program under
-the GPL, nor does the mere fact that such a program or the procedures for
-constructing it invoke the ansi2knr executable bring any other part of the
-program under the GPL.
-*/
-
-/*
- * Usage:
-	ansi2knr [--filename FILENAME] [INPUT_FILE [OUTPUT_FILE]]
- * --filename provides the file name for the #line directive in the output,
- * overriding input_file (if present).
- * If no input_file is supplied, input is read from stdin.
- * If no output_file is supplied, output goes to stdout.
- * There are no error messages.
- *
- * ansi2knr recognizes function definitions by seeing a non-keyword
- * identifier at the left margin, followed by a left parenthesis, with a
- * right parenthesis as the last character on the line, and with a left
- * brace as the first token on the following line (ignoring possible
- * intervening comments and/or preprocessor directives), except that a line
- * consisting of only
- *	identifier1(identifier2)
- * will not be considered a function definition unless identifier2 is
- * the word "void", and a line consisting of
- *	identifier1(identifier2, <<arbitrary>>)
- * will not be considered a function definition.
- * ansi2knr will recognize a multi-line header provided that no intervening
- * line ends with a left or right brace or a semicolon.  These algorithms
- * ignore whitespace, comments, and preprocessor directives, except that
- * the function name must be the first thing on the line.  The following
- * constructs will confuse it:
- *	- Any other construct that starts at the left margin and
- *	    follows the above syntax (such as a macro or function call).
- *	- Some macros that tinker with the syntax of function headers.
- */
-
-/*
- * The original and principal author of ansi2knr is L. Peter Deutsch
- * <ghost@aladdin.com>.  Other authors are noted in the change history
- * that follows (in reverse chronological order):
-
-	lpd 2000-04-12 backs out Eggert's changes because of bugs:
-	- concatlits didn't declare the type of its bufend argument;
-	- concatlits didn't recognize when it was inside a comment;
-	- scanstring could scan backward past the beginning of the string; when
-	- the check for \ + newline in scanstring was unnecessary.
-
-	2000-03-05  Paul Eggert  <eggert@twinsun.com>
-
-	Add support for concatenated string literals.
-	* ansi2knr.c (concatlits): New decl.
-	(main): Invoke concatlits to concatenate string literals.
-	(scanstring): Handle backslash-newline correctly.  Work with
-	character constants.  Fix bug when scanning backwards through
-	backslash-quote.  Check for unterminated strings.
-	(convert1): Parse character constants, too.
-	(appendline, concatlits): New functions.
-	* ansi2knr.1: Document this.
-
-	lpd 1999-08-17 added code to allow preprocessor directives
-		wherever comments are allowed
-	lpd 1999-04-12 added minor fixes from Pavel Roskin
-		<pavel_roskin@geocities.com> for clean compilation with
-		gcc -W -Wall
-	lpd 1999-03-22 added hack to recognize lines consisting of
-		identifier1(identifier2, xxx) as *not* being procedures
-	lpd 1999-02-03 made indentation of preprocessor commands consistent
-	lpd 1999-01-28 fixed two bugs: a '/' in an argument list caused an
-		endless loop; quoted strings within an argument list
-		confused the parser
-	lpd 1999-01-24 added a check for write errors on the output,
-		suggested by Jim Meyering <meyering@ascend.com>
-	lpd 1998-11-09 added further hack to recognize identifier(void)
-		as being a procedure
-	lpd 1998-10-23 added hack to recognize lines consisting of
-		identifier1(identifier2) as *not* being procedures
-	lpd 1997-12-08 made input_file optional; only closes input and/or
-		output file if not stdin or stdout respectively; prints
-		usage message on stderr rather than stdout; adds
-		--filename switch (changes suggested by
-		<ceder@lysator.liu.se>)
-	lpd 1996-01-21 added code to cope with not HAVE_CONFIG_H and with
-		compilers that don't understand void, as suggested by
-		Tom Lane
-	lpd 1996-01-15 changed to require that the first non-comment token
-		on the line following a function header be a left brace,
-		to reduce sensitivity to macros, as suggested by Tom Lane
-		<tgl@sss.pgh.pa.us>
-	lpd 1995-06-22 removed #ifndefs whose sole purpose was to define
-		undefined preprocessor symbols as 0; changed all #ifdefs
-		for configuration symbols to #ifs
-	lpd 1995-04-05 changed copyright notice to make it clear that
-		including ansi2knr in a program does not bring the entire
-		program under the GPL
-	lpd 1994-12-18 added conditionals for systems where ctype macros
-		don't handle 8-bit characters properly, suggested by
-		Francois Pinard <pinard@iro.umontreal.ca>;
-		removed --varargs switch (this is now the default)
-	lpd 1994-10-10 removed CONFIG_BROKETS conditional
-	lpd 1994-07-16 added some conditionals to help GNU `configure',
-		suggested by Francois Pinard <pinard@iro.umontreal.ca>;
-		properly erase prototype args in function parameters,
-		contributed by Jim Avera <jima@netcom.com>;
-		correct error in writeblanks (it shouldn't erase EOLs)
-	lpd 1989-xx-xx original version
- */
-
-/* Most of the conditionals here are to make ansi2knr work with */
-/* or without the GNU configure machinery. */
-
-#if HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#include <stdio.h>
-#include <ctype.h>
-
-#if HAVE_CONFIG_H
-
-/*
-   For properly autoconfiguring ansi2knr, use AC_CONFIG_HEADER(config.h).
-   This will define HAVE_CONFIG_H and so, activate the following lines.
- */
-
-# if STDC_HEADERS || HAVE_STRING_H
-#  include <string.h>
-# else
-#  include <strings.h>
-# endif
-
-#else /* not HAVE_CONFIG_H */
-
-/* Otherwise do it the hard way */
-
-# ifdef BSD
-#  include <strings.h>
-# else
-#  ifdef VMS
-    extern int strlen(), strncmp();
-#  else
-#   include <string.h>
-#  endif
-# endif
-
-#endif /* not HAVE_CONFIG_H */
-
-#if STDC_HEADERS
-# include <stdlib.h>
-#else
-/*
-   malloc and free should be declared in stdlib.h,
-   but if you've got a K&R compiler, they probably aren't.
- */
-# ifdef MSDOS
-#  include <malloc.h>
-# else
-#  ifdef VMS
-     extern char *malloc();
-     extern void free();
-#  else
-     extern char *malloc();
-     extern int free();
-#  endif
-# endif
-
-#endif
-
-/* Define NULL (for *very* old compilers). */
-#ifndef NULL
-# define NULL (0)
-#endif
-
-/*
- * The ctype macros don't always handle 8-bit characters correctly.
- * Compensate for this here.
- */
-#ifdef isascii
-# undef HAVE_ISASCII		/* just in case */
-# define HAVE_ISASCII 1
-#else
-#endif
-#if STDC_HEADERS || !HAVE_ISASCII
-# define is_ascii(c) 1
-#else
-# define is_ascii(c) isascii(c)
-#endif
-
-#define is_space(c) (is_ascii(c) && isspace(c))
-#define is_alpha(c) (is_ascii(c) && isalpha(c))
-#define is_alnum(c) (is_ascii(c) && isalnum(c))
-
-/* Scanning macros */
-#define isidchar(ch) (is_alnum(ch) || (ch) == '_')
-#define isidfirstchar(ch) (is_alpha(ch) || (ch) == '_')
-
-/* Forward references */
-char *ppdirforward();
-char *ppdirbackward();
-char *skipspace();
-char *scanstring();
-int writeblanks();
-int test1();
-int convert1();
-
-/* The main program */
-int
-main(argc, argv)
-    int argc;
-    char *argv[];
-{	FILE *in = stdin;
-	FILE *out = stdout;
-	char *filename = 0;
-	char *program_name = argv[0];
-	char *output_name = 0;
-#define bufsize 5000			/* arbitrary size */
-	char *buf;
-	char *line;
-	char *more;
-	char *usage =
-	  "Usage: ansi2knr [--filename FILENAME] [INPUT_FILE [OUTPUT_FILE]]\n";
-	/*
-	 * In previous versions, ansi2knr recognized a --varargs switch.
-	 * If this switch was supplied, ansi2knr would attempt to convert
-	 * a ... argument to va_alist and va_dcl; if this switch was not
-	 * supplied, ansi2knr would simply drop any such arguments.
-	 * Now, ansi2knr always does this conversion, and we only
-	 * check for this switch for backward compatibility.
-	 */
-	int convert_varargs = 1;
-	int output_error;
-
-	while ( argc > 1 && argv[1][0] == '-' ) {
-	  if ( !strcmp(argv[1], "--varargs") ) {
-	    convert_varargs = 1;
-	    argc--;
-	    argv++;
-	    continue;
-	  }
-	  if ( !strcmp(argv[1], "--filename") && argc > 2 ) {
-	    filename = argv[2];
-	    argc -= 2;
-	    argv += 2;
-	    continue;
-	  }
-	  fprintf(stderr, "%s: Unrecognized switch: %s\n", program_name,
-		  argv[1]);
-	  fprintf(stderr, usage);
-	  exit(1);
-	}
-	switch ( argc )
-	   {
-	default:
-		fprintf(stderr, usage);
-		exit(0);
-	case 3:
-		output_name = argv[2];
-		out = fopen(output_name, "w");
-		if ( out == NULL ) {
-		  fprintf(stderr, "%s: Cannot open output file %s\n",
-			  program_name, output_name);
-		  exit(1);
-		}
-		/* falls through */
-	case 2:
-		in = fopen(argv[1], "r");
-		if ( in == NULL ) {
-		  fprintf(stderr, "%s: Cannot open input file %s\n",
-			  program_name, argv[1]);
-		  exit(1);
-		}
-		if ( filename == 0 )
-		  filename = argv[1];
-		/* falls through */
-	case 1:
-		break;
-	   }
-	if ( filename )
-	  fprintf(out, "#line 1 \"%s\"\n", filename);
-	buf = malloc(bufsize);
-	if ( buf == NULL )
-	   {
-		fprintf(stderr, "Unable to allocate read buffer!\n");
-		exit(1);
-	   }
-	line = buf;
-	while ( fgets(line, (unsigned)(buf + bufsize - line), in) != NULL )
-	   {
-test:		line += strlen(line);
-		switch ( test1(buf) )
-		   {
-		case 2:			/* a function header */
-			convert1(buf, out, 1, convert_varargs);
-			break;
-		case 1:			/* a function */
-			/* Check for a { at the start of the next line. */
-			more = ++line;
-f:			if ( line >= buf + (bufsize - 1) ) /* overflow check */
-			  goto wl;
-			if ( fgets(line, (unsigned)(buf + bufsize - line), in) == NULL )
-			  goto wl;
-			switch ( *skipspace(ppdirforward(more), 1) )
-			  {
-			  case '{':
-			    /* Definitely a function header. */
-			    convert1(buf, out, 0, convert_varargs);
-			    fputs(more, out);
-			    break;
-			  case 0:
-			    /* The next line was blank or a comment: */
-			    /* keep scanning for a non-comment. */
-			    line += strlen(line);
-			    goto f;
-			  default:
-			    /* buf isn't a function header, but */
-			    /* more might be. */
-			    fputs(buf, out);
-			    strcpy(buf, more);
-			    line = buf;
-			    goto test;
-			  }
-			break;
-		case -1:		/* maybe the start of a function */
-			if ( line != buf + (bufsize - 1) ) /* overflow check */
-			  continue;
-			/* falls through */
-		default:		/* not a function */
-wl:			fputs(buf, out);
-			break;
-		   }
-		line = buf;
-	   }
-	if ( line != buf )
-	  fputs(buf, out);
-	free(buf);
-	if ( output_name ) {
-	  output_error = ferror(out);
-	  output_error |= fclose(out);
-	} else {		/* out == stdout */
-	  fflush(out);
-	  output_error = ferror(out);
-	}
-	if ( output_error ) {
-	  fprintf(stderr, "%s: error writing to %s\n", program_name,
-		  (output_name ? output_name : "stdout"));
-	  exit(1);
-	}
-	if ( in != stdin )
-	  fclose(in);
-	return 0;
-}
-
-/*
- * Skip forward or backward over one or more preprocessor directives.
- */
-char *
-ppdirforward(p)
-    char *p;
-{
-    for (; *p == '#'; ++p) {
-	for (; *p != '\r' && *p != '\n'; ++p)
-	    if (*p == 0)
-		return p;
-	if (*p == '\r' && p[1] == '\n')
-	    ++p;
-    }
-    return p;
-}
-char *
-ppdirbackward(p, limit)
-    char *p;
-    char *limit;
-{
-    char *np = p;
-
-    for (;; p = --np) {
-	if (*np == '\n' && np[-1] == '\r')
-	    --np;
-	for (; np > limit && np[-1] != '\r' && np[-1] != '\n'; --np)
-	    if (np[-1] == 0)
-		return np;
-	if (*np != '#')
-	    return p;
-    }
-}
-
-/*
- * Skip over whitespace, comments, and preprocessor directives,
- * in either direction.
- */
-char *
-skipspace(p, dir)
-    char *p;
-    int dir;			/* 1 for forward, -1 for backward */
-{
-    for ( ; ; ) {
-	while ( is_space(*p) )
-	    p += dir;
-	if ( !(*p == '/' && p[dir] == '*') )
-	    break;
-	p += dir;  p += dir;
-	while ( !(*p == '*' && p[dir] == '/') ) {
-	    if ( *p == 0 )
-		return p;	/* multi-line comment?? */
-	    p += dir;
-	}
-	p += dir;  p += dir;
-    }
-    return p;
-}
-
-/* Scan over a quoted string, in either direction. */
-char *
-scanstring(p, dir)
-    char *p;
-    int dir;
-{
-    for (p += dir; ; p += dir)
-	if (*p == '"' && p[-dir] != '\\')
-	    return p + dir;
-}
-
-/*
- * Write blanks over part of a string.
- * Don't overwrite end-of-line characters.
- */
-int
-writeblanks(start, end)
-    char *start;
-    char *end;
-{	char *p;
-	for ( p = start; p < end; p++ )
-	  if ( *p != '\r' && *p != '\n' )
-	    *p = ' ';
-	return 0;
-}
-
-/*
- * Test whether the string in buf is a function definition.
- * The string may contain and/or end with a newline.
- * Return as follows:
- *	0 - definitely not a function definition;
- *	1 - definitely a function definition;
- *	2 - definitely a function prototype (NOT USED);
- *	-1 - may be the beginning of a function definition,
- *		append another line and look again.
- * The reason we don't attempt to convert function prototypes is that
- * Ghostscript's declaration-generating macros look too much like
- * prototypes, and confuse the algorithms.
- */
-int
-test1(buf)
-    char *buf;
-{	char *p = buf;
-	char *bend;
-	char *endfn;
-	int contin;
-
-	if ( !isidfirstchar(*p) )
-	  return 0;		/* no name at left margin */
-	bend = skipspace(ppdirbackward(buf + strlen(buf) - 1, buf), -1);
-	switch ( *bend )
-	   {
-	   case ';': contin = 0 /*2*/; break;
-	   case ')': contin = 1; break;
-	   case '{': return 0;		/* not a function */
-	   case '}': return 0;		/* not a function */
-	   default: contin = -1;
-	   }
-	while ( isidchar(*p) )
-	  p++;
-	endfn = p;
-	p = skipspace(p, 1);
-	if ( *p++ != '(' )
-	  return 0;		/* not a function */
-	p = skipspace(p, 1);
-	if ( *p == ')' )
-	  return 0;		/* no parameters */
-	/* Check that the apparent function name isn't a keyword. */
-	/* We only need to check for keywords that could be followed */
-	/* by a left parenthesis (which, unfortunately, is most of them). */
-	   {	static char *words[] =
-		   {	"asm", "auto", "case", "char", "const", "double",
-			"extern", "float", "for", "if", "int", "long",
-			"register", "return", "short", "signed", "sizeof",
-			"static", "switch", "typedef", "unsigned",
-			"void", "volatile", "while", 0
-		   };
-		char **key = words;
-		char *kp;
-		unsigned len = endfn - buf;
-
-		while ( (kp = *key) != 0 )
-		   {	if ( strlen(kp) == len && !strncmp(kp, buf, len) )
-			  return 0;	/* name is a keyword */
-			key++;
-		   }
-	   }
-	   {
-	       char *id = p;
-	       int len;
-	       /*
-		* Check for identifier1(identifier2) and not
-		* identifier1(void), or identifier1(identifier2, xxxx).
-		*/
-
-	       while ( isidchar(*p) )
-		   p++;
-	       len = p - id;
-	       p = skipspace(p, 1);
-	       if (*p == ',' ||
-		   (*p == ')' && (len != 4 || strncmp(id, "void", 4)))
-		   )
-		   return 0;	/* not a function */
-	   }
-	/*
-	 * If the last significant character was a ), we need to count
-	 * parentheses, because it might be part of a formal parameter
-	 * that is a procedure.
-	 */
-	if (contin > 0) {
-	    int level = 0;
-
-	    for (p = skipspace(buf, 1); *p; p = skipspace(p + 1, 1))
-		level += (*p == '(' ? 1 : *p == ')' ? -1 : 0);
-	    if (level > 0)
-		contin = -1;
-	}
-	return contin;
-}
-
-/* Convert a recognized function definition or header to K&R syntax. */
-int
-convert1(buf, out, header, convert_varargs)
-    char *buf;
-    FILE *out;
-    int header;			/* Boolean */
-    int convert_varargs;	/* Boolean */
-{	char *endfn;
-	char *p;
-	/*
-	 * The breaks table contains pointers to the beginning and end
-	 * of each argument.
-	 */
-	char **breaks;
-	unsigned num_breaks = 2;	/* for testing */
-	char **btop;
-	char **bp;
-	char **ap;
-	char *vararg = 0;
-
-	/* Pre-ANSI implementations don't agree on whether strchr */
-	/* is called strchr or index, so we open-code it here. */
-	for ( endfn = buf; *(endfn++) != '('; )
-	  ;
-top:	p = endfn;
-	breaks = (char **)malloc(sizeof(char *) * num_breaks * 2);
-	if ( breaks == NULL )
-	   {	/* Couldn't allocate break table, give up */
-		fprintf(stderr, "Unable to allocate break table!\n");
-		fputs(buf, out);
-		return -1;
-	   }
-	btop = breaks + num_breaks * 2 - 2;
-	bp = breaks;
-	/* Parse the argument list */
-	do
-	   {	int level = 0;
-		char *lp = NULL;
-		char *rp = NULL;
-		char *end = NULL;
-
-		if ( bp >= btop )
-		   {	/* Filled up break table. */
-			/* Allocate a bigger one and start over. */
-			free((char *)breaks);
-			num_breaks <<= 1;
-			goto top;
-		   }
-		*bp++ = p;
-		/* Find the end of the argument */
-		for ( ; end == NULL; p++ )
-		   {	switch(*p)
-			   {
-			   case ',':
-				if ( !level ) end = p;
-				break;
-			   case '(':
-				if ( !level ) lp = p;
-				level++;
-				break;
-			   case ')':
-				if ( --level < 0 ) end = p;
-				else rp = p;
-				break;
-			   case '/':
-				if (p[1] == '*')
-				    p = skipspace(p, 1) - 1;
-				break;
-			   case '"':
-			       p = scanstring(p, 1) - 1;
-			       break;
-			   default:
-				;
-			   }
-		   }
-		/* Erase any embedded prototype parameters. */
-		if ( lp && rp )
-		  writeblanks(lp + 1, rp);
-		p--;			/* back up over terminator */
-		/* Find the name being declared. */
-		/* This is complicated because of procedure and */
-		/* array modifiers. */
-		for ( ; ; )
-		   {	p = skipspace(p - 1, -1);
-			switch ( *p )
-			   {
-			   case ']':	/* skip array dimension(s) */
-			   case ')':	/* skip procedure args OR name */
-			   {	int level = 1;
-				while ( level )
-				 switch ( *--p )
-				   {
-				   case ']': case ')':
-				       level++;
-				       break;
-				   case '[': case '(':
-				       level--;
-				       break;
-				   case '/':
-				       if (p > buf && p[-1] == '*')
-					   p = skipspace(p, -1) + 1;
-				       break;
-				   case '"':
-				       p = scanstring(p, -1) + 1;
-				       break;
-				   default: ;
-				   }
-			   }
-				if ( *p == '(' && *skipspace(p + 1, 1) == '*' )
-				   {	/* We found the name being declared */
-					while ( !isidfirstchar(*p) )
-					  p = skipspace(p, 1) + 1;
-					goto found;
-				   }
-				break;
-			   default:
-				goto found;
-			   }
-		   }
-found:		if ( *p == '.' && p[-1] == '.' && p[-2] == '.' )
-		  {	if ( convert_varargs )
-			  {	*bp++ = "va_alist";
-				vararg = p-2;
-			  }
-			else
-			  {	p++;
-				if ( bp == breaks + 1 )	/* sole argument */
-				  writeblanks(breaks[0], p);
-				else
-				  writeblanks(bp[-1] - 1, p);
-				bp--;
-			  }
-		   }
-		else
-		   {	while ( isidchar(*p) ) p--;
-			*bp++ = p+1;
-		   }
-		p = end;
-	   }
-	while ( *p++ == ',' );
-	*bp = p;
-	/* Make a special check for 'void' arglist */
-	if ( bp == breaks+2 )
-	   {	p = skipspace(breaks[0], 1);
-		if ( !strncmp(p, "void", 4) )
-		   {	p = skipspace(p+4, 1);
-			if ( p == breaks[2] - 1 )
-			   {	bp = breaks;	/* yup, pretend arglist is empty */
-				writeblanks(breaks[0], p + 1);
-			   }
-		   }
-	   }
-	/* Put out the function name and left parenthesis. */
-	p = buf;
-	while ( p != endfn ) putc(*p, out), p++;
-	/* Put out the declaration. */
-	if ( header )
-	  {	fputs(");", out);
-		for ( p = breaks[0]; *p; p++ )
-		  if ( *p == '\r' || *p == '\n' )
-		    putc(*p, out);
-	  }
-	else
-	  {	for ( ap = breaks+1; ap < bp; ap += 2 )
-		  {	p = *ap;
-			while ( isidchar(*p) )
-			  putc(*p, out), p++;
-			if ( ap < bp - 1 )
-			  fputs(", ", out);
-		  }
-		fputs(")  ", out);
-		/* Put out the argument declarations */
-		for ( ap = breaks+2; ap <= bp; ap += 2 )
-		  (*ap)[-1] = ';';
-		if ( vararg != 0 )
-		  {	*vararg = 0;
-			fputs(breaks[0], out);		/* any prior args */
-			fputs("va_dcl", out);		/* the final arg */
-			fputs(bp[0], out);
-		  }
-		else
-		  fputs(breaks[0], out);
-	  }
-	free((char *)breaks);
-	return 0;
-}
diff --git a/ar-lib b/ar-lib
new file mode 100755
index 0000000..fe2301e
--- /dev/null
+++ b/ar-lib
@@ -0,0 +1,270 @@
+#! /bin/sh
+# Wrapper for Microsoft lib.exe
+
+me=ar-lib
+scriptversion=2012-03-01.08; # UTC
+
+# Copyright (C) 2010-2013 Free Software Foundation, Inc.
+# Written by Peter Rosin <peda@lysator.liu.se>.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+
+# func_error message
+func_error ()
+{
+  echo "$me: $1" 1>&2
+  exit 1
+}
+
+file_conv=
+
+# func_file_conv build_file
+# Convert a $build file to $host form and store it in $file
+# Currently only supports Windows hosts.
+func_file_conv ()
+{
+  file=$1
+  case $file in
+    / | /[!/]*) # absolute file, and not a UNC file
+      if test -z "$file_conv"; then
+	# lazily determine how to convert abs files
+	case `uname -s` in
+	  MINGW*)
+	    file_conv=mingw
+	    ;;
+	  CYGWIN*)
+	    file_conv=cygwin
+	    ;;
+	  *)
+	    file_conv=wine
+	    ;;
+	esac
+      fi
+      case $file_conv in
+	mingw)
+	  file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
+	  ;;
+	cygwin)
+	  file=`cygpath -m "$file" || echo "$file"`
+	  ;;
+	wine)
+	  file=`winepath -w "$file" || echo "$file"`
+	  ;;
+      esac
+      ;;
+  esac
+}
+
+# func_at_file at_file operation archive
+# Iterate over all members in AT_FILE performing OPERATION on ARCHIVE
+# for each of them.
+# When interpreting the content of the @FILE, do NOT use func_file_conv,
+# since the user would need to supply preconverted file names to
+# binutils ar, at least for MinGW.
+func_at_file ()
+{
+  operation=$2
+  archive=$3
+  at_file_contents=`cat "$1"`
+  eval set x "$at_file_contents"
+  shift
+
+  for member
+  do
+    $AR -NOLOGO $operation:"$member" "$archive" || exit $?
+  done
+}
+
+case $1 in
+  '')
+     func_error "no command.  Try '$0 --help' for more information."
+     ;;
+  -h | --h*)
+    cat <<EOF
+Usage: $me [--help] [--version] PROGRAM ACTION ARCHIVE [MEMBER...]
+
+Members may be specified in a file named with @FILE.
+EOF
+    exit $?
+    ;;
+  -v | --v*)
+    echo "$me, version $scriptversion"
+    exit $?
+    ;;
+esac
+
+if test $# -lt 3; then
+  func_error "you must specify a program, an action and an archive"
+fi
+
+AR=$1
+shift
+while :
+do
+  if test $# -lt 2; then
+    func_error "you must specify a program, an action and an archive"
+  fi
+  case $1 in
+    -lib | -LIB \
+    | -ltcg | -LTCG \
+    | -machine* | -MACHINE* \
+    | -subsystem* | -SUBSYSTEM* \
+    | -verbose | -VERBOSE \
+    | -wx* | -WX* )
+      AR="$AR $1"
+      shift
+      ;;
+    *)
+      action=$1
+      shift
+      break
+      ;;
+  esac
+done
+orig_archive=$1
+shift
+func_file_conv "$orig_archive"
+archive=$file
+
+# strip leading dash in $action
+action=${action#-}
+
+delete=
+extract=
+list=
+quick=
+replace=
+index=
+create=
+
+while test -n "$action"
+do
+  case $action in
+    d*) delete=yes  ;;
+    x*) extract=yes ;;
+    t*) list=yes    ;;
+    q*) quick=yes   ;;
+    r*) replace=yes ;;
+    s*) index=yes   ;;
+    S*)             ;; # the index is always updated implicitly
+    c*) create=yes  ;;
+    u*)             ;; # TODO: don't ignore the update modifier
+    v*)             ;; # TODO: don't ignore the verbose modifier
+    *)
+      func_error "unknown action specified"
+      ;;
+  esac
+  action=${action#?}
+done
+
+case $delete$extract$list$quick$replace,$index in
+  yes,* | ,yes)
+    ;;
+  yesyes*)
+    func_error "more than one action specified"
+    ;;
+  *)
+    func_error "no action specified"
+    ;;
+esac
+
+if test -n "$delete"; then
+  if test ! -f "$orig_archive"; then
+    func_error "archive not found"
+  fi
+  for member
+  do
+    case $1 in
+      @*)
+        func_at_file "${1#@}" -REMOVE "$archive"
+        ;;
+      *)
+        func_file_conv "$1"
+        $AR -NOLOGO -REMOVE:"$file" "$archive" || exit $?
+        ;;
+    esac
+  done
+
+elif test -n "$extract"; then
+  if test ! -f "$orig_archive"; then
+    func_error "archive not found"
+  fi
+  if test $# -gt 0; then
+    for member
+    do
+      case $1 in
+        @*)
+          func_at_file "${1#@}" -EXTRACT "$archive"
+          ;;
+        *)
+          func_file_conv "$1"
+          $AR -NOLOGO -EXTRACT:"$file" "$archive" || exit $?
+          ;;
+      esac
+    done
+  else
+    $AR -NOLOGO -LIST "$archive" | sed -e 's/\\/\\\\/g' | while read member
+    do
+      $AR -NOLOGO -EXTRACT:"$member" "$archive" || exit $?
+    done
+  fi
+
+elif test -n "$quick$replace"; then
+  if test ! -f "$orig_archive"; then
+    if test -z "$create"; then
+      echo "$me: creating $orig_archive"
+    fi
+    orig_archive=
+  else
+    orig_archive=$archive
+  fi
+
+  for member
+  do
+    case $1 in
+    @*)
+      func_file_conv "${1#@}"
+      set x "$@" "@$file"
+      ;;
+    *)
+      func_file_conv "$1"
+      set x "$@" "$file"
+      ;;
+    esac
+    shift
+    shift
+  done
+
+  if test -n "$orig_archive"; then
+    $AR -NOLOGO -OUT:"$archive" "$orig_archive" "$@" || exit $?
+  else
+    $AR -NOLOGO -OUT:"$archive" "$@" || exit $?
+  fi
+
+elif test -n "$list"; then
+  if test ! -f "$orig_archive"; then
+    func_error "archive not found"
+  fi
+  $AR -NOLOGO -LIST "$archive" || exit $?
+fi
diff --git a/change.log b/change.log
index 729bca6..a1d94ff 100644
--- a/change.log
+++ b/change.log
@@ -1,6 +1,42 @@
 CHANGE LOG for Independent JPEG Group's JPEG software
 
 
+Version 9  13-Jan-2013
+----------------------
+
+Add cjpeg -rgb1 option to create an RGB JPEG file, and insert
+a simple reversible color transform into the processing which
+significantly improves the compression.
+The recommended command for lossless coding of RGB images is now
+cjpeg -rgb1 -block 1 -arithmetic.
+As said, this option improves the compression significantly, but
+the files are not compatible with JPEG decoders prior to IJG v9
+due to the included color transform.
+The used color transform and marker signaling is compatible with
+other JPEG standards (e.g., JPEG-LS part 2).
+
+Remove the automatic de-ANSI-fication support (Automake 1.12).
+Thank also to Nitin A Kamble for suggestion.
+
+Add remark for jpeg_mem_dest() in jdatadst.c.
+Thank to Elie-Gregoire Khoury for the hint.
+
+Support files with invalid component identifiers (created
+by Adobe PDF).  Thank to Robin Watts for the suggestion.
+
+Adapt full buffer case in jcmainct.c for use with scaled DCT.
+Thank to Sergii Biloshytskyi for the suggestion.
+
+Add type identifier for declaration of noreturn functions.
+Thank to Brett L. Moore for the suggestion.
+
+Correct argument type in format string, avoid compiler warnings.
+Thank to Vincent Torri for hint.
+
+Add missing #include directives in configuration checks, avoid
+configuration errors.  Thank to John Spencer for the hint.
+
+
 Version 8d  15-Jan-2012
 -----------------------
 
diff --git a/cjpeg.1 b/cjpeg.1
index c10f971..e0b8d43 100644
--- a/cjpeg.1
+++ b/cjpeg.1
@@ -1,4 +1,4 @@
-.TH CJPEG 1 "28 August 2011"
+.TH CJPEG 1 "4 May 2012"
 .SH NAME
 cjpeg \- compress an image file to a JPEG file
 .SH SYNOPSIS
@@ -53,9 +53,12 @@
 Create RGB JPEG file.
 Using this switch suppresses the conversion from RGB
 colorspace input to the default YCbCr JPEG colorspace.
-Use this switch in combination with the
+You can use this switch in combination with the
 .BI \-block " N"
 switch (see below) for lossless JPEG coding.
+See also the
+.B \-rgb1
+switch below.
 .TP
 .B \-optimize
 Perform optimization of entropy encoding parameters.  Without this, default
@@ -166,8 +169,8 @@
 .B \-arithmetic
 Use arithmetic coding.
 .B Caution:
-arithmetic coded JPEG is not yet widely implemented, so many decoders will be
-unable to view an arithmetic coded JPEG file at all.
+arithmetic coded JPEG is not yet widely implemented, so many decoders will
+be unable to view an arithmetic coded JPEG file at all.
 .TP
 .BI \-block " N"
 Set DCT block size.  All N from 1 to 16 are possible.
@@ -181,6 +184,21 @@
 feature.  SmartScale enabled JPEG is not yet widely implemented, so many
 decoders will be unable to view a SmartScale extended JPEG file at all.
 .TP
+.B \-rgb1
+Create RGB JPEG file with reversible color transform.
+Works like the
+.B \-rgb
+switch (see above) and inserts a simple reversible color transform
+into the processing which significantly improves the compression.
+Use this switch in combination with the
+.BI \-block " N"
+switch (see above) for lossless JPEG coding.
+.B Caution:
+A decoder with inverse color transform support is required for
+this feature.  Reversible color transform support is not yet
+widely implemented, so many decoders will be unable to view
+a reversible color transformed JPEG file at all.
+.TP
 .B \-dct int
 Use integer DCT method (default).
 .TP
diff --git a/cjpeg.c b/cjpeg.c
index 9a9a09a..d05cdd0 100644
--- a/cjpeg.c
+++ b/cjpeg.c
@@ -2,7 +2,7 @@
  * cjpeg.c
  *
  * Copyright (C) 1991-1998, Thomas G. Lane.
- * Modified 2003-2011 by Guido Vollbeding.
+ * Modified 2003-2013 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -172,6 +172,9 @@
 #ifdef DCT_SCALING_SUPPORTED
   fprintf(stderr, "  -block N       DCT block size (1..16; default is 8)\n");
 #endif
+#if JPEG_LIB_VERSION_MAJOR >= 9
+  fprintf(stderr, "  -rgb1          Create RGB JPEG file with reversible color transform\n");
+#endif
 #ifdef DCT_ISLOW_SUPPORTED
   fprintf(stderr, "  -dct int       Use integer DCT method%s\n",
 	  (JDCT_DEFAULT == JDCT_ISLOW ? " (default)" : ""));
@@ -310,8 +313,14 @@
       /* Force a monochrome JPEG file to be generated. */
       jpeg_set_colorspace(cinfo, JCS_GRAYSCALE);
 
-    } else if (keymatch(arg, "rgb", 3)) {
+    } else if (keymatch(arg, "rgb", 3) || keymatch(arg, "rgb1", 4)) {
       /* Force an RGB JPEG file to be generated. */
+#if JPEG_LIB_VERSION_MAJOR >= 9
+      /* Note: Entropy table assignment in jpeg_set_colorspace depends
+       * on color_transform.
+       */
+      cinfo->color_transform = arg[3] ? JCT_SUBTRACT_GREEN : JCT_NONE;
+#endif
       jpeg_set_colorspace(cinfo, JCS_RGB);
 
     } else if (keymatch(arg, "maxmemory", 3)) {
@@ -328,7 +337,7 @@
       cinfo->mem->max_memory_to_use = lval * 1000L;
 
     } else if (keymatch(arg, "nosmooth", 3)) {
-      /* Suppress fancy downsampling */
+      /* Suppress fancy downsampling. */
       cinfo->do_fancy_downsampling = FALSE;
 
     } else if (keymatch(arg, "optimize", 1) || keymatch(arg, "optimise", 1)) {
@@ -414,7 +423,7 @@
       /* Scale the image by a fraction M/N. */
       if (++argn >= argc)	/* advance to next argument */
 	usage();
-      if (sscanf(argv[argn], "%d/%d",
+      if (sscanf(argv[argn], "%u/%u",
 		 &cinfo->scale_num, &cinfo->scale_denom) != 2)
 	usage();
 
diff --git a/config.guess b/config.guess
index 8152efd..1804e9f 100755
--- a/config.guess
+++ b/config.guess
@@ -2,13 +2,13 @@
 # Attempt to guess a canonical system name.
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
 #   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
-#   2011 Free Software Foundation, Inc.
+#   2011, 2012, 2013 Free Software Foundation, Inc.
 
-timestamp='2011-11-11'
+timestamp='2012-12-29'
 
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
+# the Free Software Foundation; either version 3 of the License, or
 # (at your option) any later version.
 #
 # This program is distributed in the hope that it will be useful, but
@@ -17,26 +17,22 @@
 # General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
-# 02110-1301, USA.
+# along with this program; if not, see <http://www.gnu.org/licenses/>.
 #
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
 # configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-
-# Originally written by Per Bothner.  Please send patches (context
-# diff format) to <config-patches@gnu.org> and include a ChangeLog
-# entry.
+# the same distribution terms that you use for the rest of that
+# program.  This Exception is an additional permission under section 7
+# of the GNU General Public License, version 3 ("GPLv3").
 #
-# This script attempts to guess a canonical system name similar to
-# config.sub.  If it succeeds, it prints the system name on stdout, and
-# exits with 0.  Otherwise, it exits with 1.
+# Originally written by Per Bothner. 
 #
 # You can get the latest version of this script from:
 # http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+#
+# Please send patches with a ChangeLog entry to config-patches@gnu.org.
+
 
 me=`echo "$0" | sed -e 's,.*/,,'`
 
@@ -57,8 +53,8 @@
 
 Originally written by Per Bothner.
 Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
-2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free
-Software Foundation, Inc.
+2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011,
+2012, 2013 Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -145,7 +141,7 @@
 case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
     *:NetBSD:*:*)
 	# NetBSD (nbsd) targets should (where applicable) match one or
-	# more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
+	# more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*,
 	# *-*-netbsdecoff* and *-*-netbsd*.  For targets that recently
 	# switched to ELF, *-*-netbsd* would select the old
 	# object file format.  This provides both forward
@@ -202,6 +198,10 @@
 	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
 	echo "${machine}-${os}${release}"
 	exit ;;
+    *:Bitrig:*:*)
+	UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'`
+	echo ${UNAME_MACHINE_ARCH}-unknown-bitrig${UNAME_RELEASE}
+	exit ;;
     *:OpenBSD:*:*)
 	UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
 	echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
@@ -304,7 +304,7 @@
     arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
 	echo arm-acorn-riscix${UNAME_RELEASE}
 	exit ;;
-    arm:riscos:*:*|arm:RISCOS:*:*)
+    arm*:riscos:*:*|arm*:RISCOS:*:*)
 	echo arm-unknown-riscos
 	exit ;;
     SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
@@ -803,6 +803,9 @@
     i*:CYGWIN*:*)
 	echo ${UNAME_MACHINE}-pc-cygwin
 	exit ;;
+    *:MINGW64*:*)
+	echo ${UNAME_MACHINE}-pc-mingw64
+	exit ;;
     *:MINGW*:*)
 	echo ${UNAME_MACHINE}-pc-mingw32
 	exit ;;
@@ -863,6 +866,13 @@
     i*86:Minix:*:*)
 	echo ${UNAME_MACHINE}-pc-minix
 	exit ;;
+    aarch64:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    aarch64_be:Linux:*:*)
+	UNAME_MACHINE=aarch64_be
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
     alpha:Linux:*:*)
 	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
 	  EV5)   UNAME_MACHINE=alphaev5 ;;
@@ -897,16 +907,16 @@
 	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
     cris:Linux:*:*)
-	echo cris-axis-linux-gnu
+	echo ${UNAME_MACHINE}-axis-linux-gnu
 	exit ;;
     crisv32:Linux:*:*)
-	echo crisv32-axis-linux-gnu
+	echo ${UNAME_MACHINE}-axis-linux-gnu
 	exit ;;
     frv:Linux:*:*)
-	echo frv-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
     hexagon:Linux:*:*)
-	echo hexagon-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
     i*86:Linux:*:*)
 	LIBC=gnu
@@ -948,7 +958,7 @@
 	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
 	;;
     or32:Linux:*:*)
-	echo or32-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
     padre:Linux:*:*)
 	echo sparc-unknown-linux-gnu
@@ -989,7 +999,7 @@
 	echo ${UNAME_MACHINE}-dec-linux-gnu
 	exit ;;
     x86_64:Linux:*:*)
-	echo x86_64-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
     xtensa*:Linux:*:*)
 	echo ${UNAME_MACHINE}-unknown-linux-gnu
@@ -1196,6 +1206,9 @@
     BePC:Haiku:*:*)	# Haiku running on Intel PC compatible.
 	echo i586-pc-haiku
 	exit ;;
+    x86_64:Haiku:*:*)
+	echo x86_64-unknown-haiku
+	exit ;;
     SX-4:SUPER-UX:*:*)
 	echo sx4-nec-superux${UNAME_RELEASE}
 	exit ;;
@@ -1251,7 +1264,7 @@
     NEO-?:NONSTOP_KERNEL:*:*)
 	echo neo-tandem-nsk${UNAME_RELEASE}
 	exit ;;
-    NSE-?:NONSTOP_KERNEL:*:*)
+    NSE-*:NONSTOP_KERNEL:*:*)
 	echo nse-tandem-nsk${UNAME_RELEASE}
 	exit ;;
     NSR-?:NONSTOP_KERNEL:*:*)
@@ -1320,11 +1333,11 @@
     i*86:AROS:*:*)
 	echo ${UNAME_MACHINE}-pc-aros
 	exit ;;
+    x86_64:VMkernel:*:*)
+	echo ${UNAME_MACHINE}-unknown-esx
+	exit ;;
 esac
 
-#echo '(No uname command or uname output not recognized.)' 1>&2
-#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
-
 eval $set_cc_for_build
 cat >$dummy.c <<EOF
 #ifdef _SEQUENT_
diff --git a/config.sub b/config.sub
index e76eaf4..802a224 100755
--- a/config.sub
+++ b/config.sub
@@ -2,37 +2,32 @@
 # Configuration validation subroutine script.
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
 #   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
-#   2011 Free Software Foundation, Inc.
+#   2011, 2012, 2013 Free Software Foundation, Inc.
 
-timestamp='2011-11-11'
+timestamp='2012-12-29'
 
-# This file is (in principle) common to ALL GNU software.
-# The presence of a machine in this file suggests that SOME GNU software
-# can handle that machine.  It does not imply ALL GNU software can.
-#
-# This file is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
 # (at your option) any later version.
 #
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
-# 02110-1301, USA.
+# along with this program; if not, see <http://www.gnu.org/licenses/>.
 #
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
 # configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
+# the same distribution terms that you use for the rest of that
+# program.  This Exception is an additional permission under section 7
+# of the GNU General Public License, version 3 ("GPLv3").
 
 
-# Please send patches to <config-patches@gnu.org>.  Submit a context
-# diff and a properly formatted GNU ChangeLog entry.
+# Please send patches with a ChangeLog entry to config-patches@gnu.org.
 #
 # Configuration subroutine to validate and canonicalize a configuration type.
 # Supply the specified configuration type as an argument.
@@ -76,8 +71,8 @@
 GNU config.sub ($timestamp)
 
 Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
-2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free
-Software Foundation, Inc.
+2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011,
+2012, 2013 Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -125,13 +120,17 @@
 maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
 case $maybe_os in
   nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \
-  linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
+  linux-musl* | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
   knetbsd*-gnu* | netbsd*-gnu* | \
   kopensolaris*-gnu* | \
   storm-chaos* | os2-emx* | rtmk-nova*)
     os=-$maybe_os
     basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
     ;;
+  android-linux)
+    os=-linux-android
+    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown
+    ;;
   *)
     basic_machine=`echo $1 | sed 's/-[^-]*$//'`
     if [ $basic_machine != $1 ]
@@ -154,7 +153,7 @@
 	-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
 	-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
 	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
-	-apple | -axis | -knuth | -cray | -microblaze)
+	-apple | -axis | -knuth | -cray | -microblaze*)
 		os=
 		basic_machine=$1
 		;;
@@ -223,6 +222,12 @@
 	-isc*)
 		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
 		;;
+	-lynx*178)
+		os=-lynxos178
+		;;
+	-lynx*5)
+		os=-lynxos5
+		;;
 	-lynx*)
 		os=-lynxos
 		;;
@@ -247,11 +252,14 @@
 	# Some are omitted here because they have special meanings below.
 	1750a | 580 \
 	| a29k \
+	| aarch64 | aarch64_be \
 	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
 	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
 	| am33_2.0 \
-	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
-        | be32 | be64 \
+	| arc \
+	| arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv7[arm] \
+	| avr | avr32 \
+	| be32 | be64 \
 	| bfin \
 	| c4x | clipper \
 	| d10v | d30v | dlx | dsp16xx \
@@ -264,7 +272,7 @@
 	| le32 | le64 \
 	| lm32 \
 	| m32c | m32r | m32rle | m68000 | m68k | m88k \
-	| maxq | mb | microblaze | mcore | mep | metag \
+	| maxq | mb | microblaze | microblazeel | mcore | mep | metag \
 	| mips | mipsbe | mipseb | mipsel | mipsle \
 	| mips16 \
 	| mips64 | mips64el \
@@ -319,8 +327,7 @@
 	c6x)
 		basic_machine=tic6x-unknown
 		;;
-	m6811 | m68hc11 | m6812 | m68hc12 | picochip)
-		# Motorola 68HC11/12.
+	m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | picochip)
 		basic_machine=$basic_machine-unknown
 		os=-none
 		;;
@@ -333,7 +340,10 @@
 	strongarm | thumb | xscale)
 		basic_machine=arm-unknown
 		;;
-
+	xgate)
+		basic_machine=$basic_machine-unknown
+		os=-none
+		;;
 	xscaleeb)
 		basic_machine=armeb-unknown
 		;;
@@ -356,6 +366,7 @@
 	# Recognize the basic CPU types with company name.
 	580-* \
 	| a29k-* \
+	| aarch64-* | aarch64_be-* \
 	| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
 	| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
 	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
@@ -377,7 +388,8 @@
 	| lm32-* \
 	| m32c-* | m32r-* | m32rle-* \
 	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
-	| m88110-* | m88k-* | maxq-* | mcore-* | metag-* | microblaze-* \
+	| m88110-* | m88k-* | maxq-* | mcore-* | metag-* \
+	| microblaze-* | microblazeel-* \
 	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
 	| mips16-* \
 	| mips64-* | mips64el-* \
@@ -719,7 +731,6 @@
 	i370-ibm* | ibm*)
 		basic_machine=i370-ibm
 		;;
-# I'm not sure what "Sysv32" means.  Should this be sysv3.2?
 	i*86v32)
 		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
 		os=-sysv32
@@ -777,9 +788,13 @@
 		basic_machine=ns32k-utek
 		os=-sysv
 		;;
-	microblaze)
+	microblaze*)
 		basic_machine=microblaze-xilinx
 		;;
+	mingw64)
+		basic_machine=x86_64-pc
+		os=-mingw64
+		;;
 	mingw32)
 		basic_machine=i386-pc
 		os=-mingw32
@@ -1008,7 +1023,11 @@
 		basic_machine=i586-unknown
 		os=-pw32
 		;;
-	rdos)
+	rdos | rdos64)
+		basic_machine=x86_64-pc
+		os=-rdos
+		;;
+	rdos32)
 		basic_machine=i386-pc
 		os=-rdos
 		;;
@@ -1341,15 +1360,15 @@
 	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
 	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
 	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
-	      | -openbsd* | -solidbsd* \
+	      | -bitrig* | -openbsd* | -solidbsd* \
 	      | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
 	      | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
 	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
 	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
 	      | -chorusos* | -chorusrdb* | -cegcc* \
 	      | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
-	      | -mingw32* | -linux-gnu* | -linux-android* \
-	      | -linux-newlib* | -linux-uclibc* \
+	      | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \
+	      | -linux-newlib* | -linux-musl* | -linux-uclibc* \
 	      | -uxpv* | -beos* | -mpeix* | -udk* \
 	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
 	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
@@ -1532,6 +1551,9 @@
 	c4x-* | tic4x-*)
 		os=-coff
 		;;
+	hexagon-*)
+		os=-elf
+		;;
 	tic54x-*)
 		os=-coff
 		;;
@@ -1559,9 +1581,6 @@
 		;;
 	m68000-sun)
 		os=-sunos3
-		# This also exists in the configure program, but was not the
-		# default.
-		# os=-sunos4
 		;;
 	m68*-cisco)
 		os=-aout
diff --git a/configure b/configure
index 9ba1383..c7b1387 100755
--- a/configure
+++ b/configure
@@ -1,11 +1,9 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.68 for libjpeg 8.4.0.
+# Generated by GNU Autoconf 2.69 for libjpeg 9.0.0.
 #
 #
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software
-# Foundation, Inc.
+# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
 #
 #
 # This configure script is free software; the Free Software Foundation
@@ -134,6 +132,31 @@
 # CDPATH.
 (unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
+# Use a proper internal environment variable to ensure we don't fall
+  # into an infinite loop, continuously re-executing ourselves.
+  if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
+    _as_can_reexec=no; export _as_can_reexec;
+    # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+  *v*x* | *x*v* ) as_opts=-vx ;;
+  *v* ) as_opts=-v ;;
+  *x* ) as_opts=-x ;;
+  * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+as_fn_exit 255
+  fi
+  # We don't want this to propagate to other subprocesses.
+          { _as_can_reexec=; unset _as_can_reexec;}
 if test "x$CONFIG_SHELL" = x; then
   as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
   emulate sh
@@ -167,7 +190,8 @@
 else
   exitcode=1; echo positional parameters were not saved.
 fi
-test x\$exitcode = x0 || exit 1"
+test x\$exitcode = x0 || exit 1
+test -x / || exit 1"
   as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
   as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
   eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
@@ -220,21 +244,25 @@
 
 
       if test "x$CONFIG_SHELL" != x; then :
-  # We cannot yet assume a decent shell, so we have to provide a
-	# neutralization value for shells without unset; and this also
-	# works around shells that cannot unset nonexistent variables.
-	# Preserve -v and -x to the replacement shell.
-	BASH_ENV=/dev/null
-	ENV=/dev/null
-	(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
-	export CONFIG_SHELL
-	case $- in # ((((
-	  *v*x* | *x*v* ) as_opts=-vx ;;
-	  *v* ) as_opts=-v ;;
-	  *x* ) as_opts=-x ;;
-	  * ) as_opts= ;;
-	esac
-	exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"}
+  export CONFIG_SHELL
+             # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+  *v*x* | *x*v* ) as_opts=-vx ;;
+  *v* ) as_opts=-v ;;
+  *x* ) as_opts=-x ;;
+  * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+exit 255
 fi
 
     if test x$as_have_required = xno; then :
@@ -336,6 +364,14 @@
 
 
 } # as_fn_mkdir_p
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+  test -f "$1" && test -x "$1"
+} # as_fn_executable_p
 # as_fn_append VAR VALUE
 # ----------------------
 # Append the text in VALUE to the end of the definition contained in VAR. Take
@@ -457,6 +493,10 @@
   chmod +x "$as_me.lineno" ||
     { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
 
+  # If we had to re-execute with $CONFIG_SHELL, we're ensured to have
+  # already done that, so ensure we don't try to do so again and fall
+  # in an infinite loop.  This has already happened in practice.
+  _as_can_reexec=no; export _as_can_reexec
   # Don't try to exec as it changes $[0], causing all sort of problems
   # (the dirname of $[0] is not the place where we might find the
   # original and so on.  Autoconf is especially sensitive to this).
@@ -491,16 +531,16 @@
     # ... but there are two gotchas:
     # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
     # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-    # In both cases, we have to default to `cp -p'.
+    # In both cases, we have to default to `cp -pR'.
     ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
-      as_ln_s='cp -p'
+      as_ln_s='cp -pR'
   elif ln conf$$.file conf$$ 2>/dev/null; then
     as_ln_s=ln
   else
-    as_ln_s='cp -p'
+    as_ln_s='cp -pR'
   fi
 else
-  as_ln_s='cp -p'
+  as_ln_s='cp -pR'
 fi
 rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
 rmdir conf$$.dir 2>/dev/null
@@ -512,28 +552,8 @@
   as_mkdir_p=false
 fi
 
-if test -x / >/dev/null 2>&1; then
-  as_test_x='test -x'
-else
-  if ls -dL / >/dev/null 2>&1; then
-    as_ls_L_option=L
-  else
-    as_ls_L_option=
-  fi
-  as_test_x='
-    eval sh -c '\''
-      if test -d "$1"; then
-	test -d "$1/.";
-      else
-	case $1 in #(
-	-*)set "./$1";;
-	esac;
-	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
-	???[sx]*):;;*)false;;esac;fi
-    '\'' sh
-  '
-fi
-as_executable_p=$as_test_x
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
 
 # Sed expression to map a string onto a valid CPP name.
 as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
@@ -567,8 +587,8 @@
 # Identity of this package.
 PACKAGE_NAME='libjpeg'
 PACKAGE_TARNAME='libjpeg'
-PACKAGE_VERSION='8.4.0'
-PACKAGE_STRING='libjpeg 8.4.0'
+PACKAGE_VERSION='9.0.0'
+PACKAGE_STRING='libjpeg 9.0.0'
 PACKAGE_BUGREPORT=''
 PACKAGE_URL=''
 
@@ -621,8 +641,6 @@
 DSYMUTIL
 MANIFEST_TOOL
 RANLIB
-ac_ct_AR
-AR
 NM
 ac_ct_DUMPBIN
 DUMPBIN
@@ -633,16 +651,13 @@
 OBJDUMP
 DLLTOOL
 AS
-HAVE_LD_VERSION_SCRIPT_FALSE
-HAVE_LD_VERSION_SCRIPT_TRUE
-LN_S
-MAINT
-MAINTAINER_MODE_FALSE
-MAINTAINER_MODE_TRUE
-ANSI2KNR
-U
 EGREP
 GREP
+HAVE_LD_VERSION_SCRIPT_FALSE
+HAVE_LD_VERSION_SCRIPT_TRUE
+ac_ct_AR
+AR
+LN_S
 CPP
 am__fastdepCC_FALSE
 am__fastdepCC_TRUE
@@ -661,8 +676,13 @@
 LDFLAGS
 CFLAGS
 CC
+MAINT
+MAINTAINER_MODE_FALSE
+MAINTAINER_MODE_TRUE
 AM_BACKSLASH
 AM_DEFAULT_VERBOSITY
+AM_DEFAULT_V
+AM_V
 am__untar
 am__tar
 AMTAR
@@ -740,8 +760,8 @@
 ac_user_opts='
 enable_option_checking
 enable_silent_rules
-enable_dependency_tracking
 enable_maintainer_mode
+enable_dependency_tracking
 enable_ld_version_script
 enable_shared
 enable_static
@@ -1216,8 +1236,6 @@
 if test "x$host_alias" != x; then
   if test "x$build_alias" = x; then
     cross_compiling=maybe
-    $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host.
-    If a cross compiler is detected then cross compile mode will be used" >&2
   elif test "x$build_alias" != "x$host_alias"; then
     cross_compiling=yes
   fi
@@ -1303,7 +1321,7 @@
   # Omit some internal or obsolete options to make the list less imposing.
   # This message is too long to be a string in the A/UX 3.1 sh.
   cat <<_ACEOF
-\`configure' configures libjpeg 8.4.0 to adapt to many kinds of systems.
+\`configure' configures libjpeg 9.0.0 to adapt to many kinds of systems.
 
 Usage: $0 [OPTION]... [VAR=VALUE]...
 
@@ -1374,7 +1392,7 @@
 
 if test -n "$ac_init_help"; then
   case $ac_init_help in
-     short | recursive ) echo "Configuration of libjpeg 8.4.0:";;
+     short | recursive ) echo "Configuration of libjpeg 9.0.0:";;
    esac
   cat <<\_ACEOF
 
@@ -1382,12 +1400,15 @@
   --disable-option-checking  ignore unrecognized --enable/--with options
   --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
   --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --enable-silent-rules          less verbose build output (undo: `make V=1')
-  --disable-silent-rules         verbose build output (undo: `make V=0')
-  --disable-dependency-tracking  speeds up one-time build
-  --enable-dependency-tracking   do not reject slow dependency extractors
-  --enable-maintainer-mode  enable make rules and dependencies not useful
-			  (and sometimes confusing) to the casual installer
+  --enable-silent-rules   less verbose build output (undo: "make V=1")
+  --disable-silent-rules  verbose build output (undo: "make V=0")
+  --enable-maintainer-mode
+                          enable make rules and dependencies not useful (and
+                          sometimes confusing) to the casual installer
+  --enable-dependency-tracking
+                          do not reject slow dependency extractors
+  --disable-dependency-tracking
+                          speeds up one-time build
   --enable-ld-version-script
                           enable linker version script (default is enabled
                           when possible)
@@ -1483,10 +1504,10 @@
 test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then
   cat <<\_ACEOF
-libjpeg configure 8.4.0
-generated by GNU Autoconf 2.68
+libjpeg configure 9.0.0
+generated by GNU Autoconf 2.69
 
-Copyright (C) 2010 Free Software Foundation, Inc.
+Copyright (C) 2012 Free Software Foundation, Inc.
 This configure script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it.
 _ACEOF
@@ -1572,13 +1593,13 @@
 
 } # ac_fn_c_try_cpp
 
-# ac_fn_c_try_run LINENO
-# ----------------------
-# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
-# that executables *can* be run.
-ac_fn_c_try_run ()
+# ac_fn_c_try_link LINENO
+# -----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_link ()
 {
   as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext conftest$ac_exeext
   if { { ac_try="$ac_link"
 case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
@@ -1586,33 +1607,37 @@
 esac
 eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
 $as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_link") 2>&5
+  (eval "$ac_link") 2>conftest.err
   ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
-  { { case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }; }; then :
+  test $ac_status = 0; } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 test -x conftest$ac_exeext
+       }; then :
   ac_retval=0
 else
-  $as_echo "$as_me: program exited with status $ac_status" >&5
-       $as_echo "$as_me: failed program was:" >&5
+  $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-       ac_retval=$ac_status
+	ac_retval=1
 fi
+  # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+  # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+  # interfere with the next link command; also delete a directory that is
+  # left behind by Apple's compiler.  We do this before executing the actions.
   rm -rf conftest.dSYM conftest_ipa8_conftest.oo
   eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
   as_fn_set_status $ac_retval
 
-} # ac_fn_c_try_run
+} # ac_fn_c_try_link
 
 # ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES
 # -------------------------------------------------------
@@ -1701,6 +1726,48 @@
 
 } # ac_fn_c_check_header_mongrel
 
+# ac_fn_c_try_run LINENO
+# ----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
+# that executables *can* be run.
+ac_fn_c_try_run ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: program exited with status $ac_status" >&5
+       $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+       ac_retval=$ac_status
+fi
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_run
+
 # ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
 # -------------------------------------------------------
 # Tests whether HEADER exists and can be compiled using the include files in
@@ -1732,52 +1799,6 @@
 
 } # ac_fn_c_check_header_compile
 
-# ac_fn_c_try_link LINENO
-# -----------------------
-# Try to link conftest.$ac_ext, and return whether this succeeded.
-ac_fn_c_try_link ()
-{
-  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-  rm -f conftest.$ac_objext conftest$ac_exeext
-  if { { ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_link") 2>conftest.err
-  ac_status=$?
-  if test -s conftest.err; then
-    grep -v '^ *+' conftest.err >conftest.er1
-    cat conftest.er1 >&5
-    mv -f conftest.er1 conftest.err
-  fi
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then :
-  ac_retval=0
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_retval=1
-fi
-  # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
-  # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
-  # interfere with the next link command; also delete a directory that is
-  # left behind by Apple's compiler.  We do this before executing the actions.
-  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
-  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
-  as_fn_set_status $ac_retval
-
-} # ac_fn_c_try_link
-
 # ac_fn_c_check_func LINENO FUNC VAR
 # ----------------------------------
 # Tests whether FUNC exists, setting the cache variable VAR accordingly
@@ -1848,8 +1869,8 @@
 This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 
-It was created by libjpeg $as_me 8.4.0, which was
-generated by GNU Autoconf 2.68.  Invocation command line was
+It was created by libjpeg $as_me 9.0.0, which was
+generated by GNU Autoconf 2.69.  Invocation command line was
 
   $ $0 $@
 
@@ -2349,7 +2370,7 @@
 
 # Initialize Automake
 # Don't require all the GNU mandated files
-am__api_version='1.11'
+am__api_version='1.13'
 
 # Find a good install program.  We prefer a C program (faster),
 # so one script is as good as another.  But avoid the broken or
@@ -2388,7 +2409,7 @@
     # by default.
     for ac_prog in ginstall scoinst install; do
       for ac_exec_ext in '' $ac_executable_extensions; do
-	if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
+	if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
 	  if test $ac_prog = install &&
 	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
 	    # AIX install.  It has an incompatible calling convention.
@@ -2446,9 +2467,6 @@
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
 $as_echo_n "checking whether build environment is sane... " >&6; }
-# Just in case
-sleep 1
-echo timestamp > conftest.file
 # Reject unsafe characters in $srcdir or the absolute working directory
 # name.  Accept space and tab only in the latter.
 am_lf='
@@ -2459,32 +2477,40 @@
 esac
 case $srcdir in
   *[\\\"\#\$\&\'\`$am_lf\ \	]*)
-    as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;;
+    as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;;
 esac
 
-# Do `set' in a subshell so we don't clobber the current shell's
+# Do 'set' in a subshell so we don't clobber the current shell's
 # arguments.  Must try -L first in case configure is actually a
 # symlink; some systems play weird games with the mod time of symlinks
 # (eg FreeBSD returns the mod time of the symlink's containing
 # directory).
 if (
-   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t "$srcdir/configure" conftest.file`
-   fi
-   rm -f conftest.file
-   if test "$*" != "X $srcdir/configure conftest.file" \
-      && test "$*" != "X conftest.file $srcdir/configure"; then
+   am_has_slept=no
+   for am_try in 1 2; do
+     echo "timestamp, slept: $am_has_slept" > conftest.file
+     set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+     if test "$*" = "X"; then
+	# -L didn't work.
+	set X `ls -t "$srcdir/configure" conftest.file`
+     fi
+     if test "$*" != "X $srcdir/configure conftest.file" \
+	&& test "$*" != "X conftest.file $srcdir/configure"; then
 
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      as_fn_error $? "ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" "$LINENO" 5
-   fi
-
+	# If neither matched, then we have a broken ls.  This can happen
+	# if, for instance, CONFIG_SHELL is bash and it inherits a
+	# broken ls alias from the environment.  This has actually
+	# happened.  Such a system could not be considered "sane".
+	as_fn_error $? "ls -t appears to fail.  Make sure there is not a broken
+  alias in your environment" "$LINENO" 5
+     fi
+     if test "$2" = conftest.file || test $am_try -eq 2; then
+       break
+     fi
+     # Just in case.
+     sleep 1
+     am_has_slept=yes
+   done
    test "$2" = conftest.file
    )
 then
@@ -2496,6 +2522,16 @@
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
+# If we didn't sleep, we still need to ensure time stamps of config.status and
+# generated files are strictly newer.
+am_sleep_pid=
+if grep 'slept: no' conftest.file >/dev/null 2>&1; then
+  ( sleep 1 ) &
+  am_sleep_pid=$!
+fi
+
+rm -f conftest.file
+
 test "$program_prefix" != NONE &&
   program_transform_name="s&^&$program_prefix&;$program_transform_name"
 # Use a double $ so make ignores it.
@@ -2518,12 +2554,12 @@
   esac
 fi
 # Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
-  am_missing_run="$MISSING --run "
+if eval "$MISSING --is-lightweight"; then
+  am_missing_run="$MISSING "
 else
   am_missing_run=
-  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5
-$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5
+$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;}
 fi
 
 if test x"${install_sh}" != xset; then
@@ -2535,10 +2571,10 @@
   esac
 fi
 
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'.  However `strip' might not be the right
+# Installed binaries are usually stripped using 'strip' when the user
+# run "make install-strip".  However 'strip' might not be the right
 # tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
+# will honor the 'STRIP' environment variable to overrule this program.
 if test "$cross_compiling" != no; then
   if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
@@ -2557,7 +2593,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_STRIP="${ac_tool_prefix}strip"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -2597,7 +2633,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_STRIP="strip"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -2648,7 +2684,7 @@
   test -z "$as_dir" && as_dir=.
     for ac_prog in mkdir gmkdir; do
 	 for ac_exec_ext in '' $ac_executable_extensions; do
-	   { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
+	   as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue
 	   case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
 	     'mkdir (GNU coreutils) '* | \
 	     'mkdir (coreutils) '* | \
@@ -2677,12 +2713,6 @@
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
 $as_echo "$MKDIR_P" >&6; }
 
-mkdir_p="$MKDIR_P"
-case $mkdir_p in
-  [\\/$]* | ?:[\\/]*) ;;
-  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
-esac
-
 for ac_prog in gawk mawk nawk awk
 do
   # Extract the first word of "$ac_prog", so it can be a program name with args.
@@ -2701,7 +2731,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_AWK="$ac_prog"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -2765,6 +2795,45 @@
 fi
 rmdir .tst 2>/dev/null
 
+# Check whether --enable-silent-rules was given.
+if test "${enable_silent_rules+set}" = set; then :
+  enableval=$enable_silent_rules;
+fi
+
+case $enable_silent_rules in # (((
+  yes) AM_DEFAULT_VERBOSITY=0;;
+   no) AM_DEFAULT_VERBOSITY=1;;
+    *) AM_DEFAULT_VERBOSITY=1;;
+esac
+am_make=${MAKE-make}
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5
+$as_echo_n "checking whether $am_make supports nested variables... " >&6; }
+if ${am_cv_make_support_nested_variables+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if $as_echo 'TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+	@$(TRUE)
+.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then
+  am_cv_make_support_nested_variables=yes
+else
+  am_cv_make_support_nested_variables=no
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5
+$as_echo "$am_cv_make_support_nested_variables" >&6; }
+if test $am_cv_make_support_nested_variables = yes; then
+    AM_V='$(V)'
+  AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+  AM_V=$AM_DEFAULT_VERBOSITY
+  AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+AM_BACKSLASH='\'
+
 if test "`cd $srcdir && pwd`" != "`pwd`"; then
   # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
   # is not polluted with repeated "-I."
@@ -2787,7 +2856,7 @@
 
 # Define the identity of the package.
  PACKAGE='libjpeg'
- VERSION='8.4.0'
+ VERSION='9.0.0'
 
 
 cat >>confdefs.h <<_ACEOF
@@ -2815,13 +2884,19 @@
 
 MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
 
+# For better backward compatibility.  To be removed once Automake 1.9.x
+# dies out for good.  For more background, see:
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
+mkdir_p='$(MKDIR_P)'
+
 # We need awk for the "check" target.  The system "awk" is bad on
 # some platforms.
-# Always define AMTAR for backward compatibility.
+# Always define AMTAR for backward compatibility.  Yes, it's still used
+# in the wild :-(  We should find a proper way to deprecate it ...
+AMTAR='$${TAR-tar}'
 
-AMTAR=${AMTAR-"${am_missing_run}tar"}
-
-am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
+am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'
 
 
 
@@ -2836,78 +2911,69 @@
   enableval=$enable_silent_rules;
 fi
 
-case $enable_silent_rules in
-yes) AM_DEFAULT_VERBOSITY=0;;
-no)  AM_DEFAULT_VERBOSITY=1;;
-*)   AM_DEFAULT_VERBOSITY=0;;
+case $enable_silent_rules in # (((
+  yes) AM_DEFAULT_VERBOSITY=0;;
+   no) AM_DEFAULT_VERBOSITY=1;;
+    *) AM_DEFAULT_VERBOSITY=0;;
 esac
+am_make=${MAKE-make}
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5
+$as_echo_n "checking whether $am_make supports nested variables... " >&6; }
+if ${am_cv_make_support_nested_variables+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if $as_echo 'TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+	@$(TRUE)
+.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then
+  am_cv_make_support_nested_variables=yes
+else
+  am_cv_make_support_nested_variables=no
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5
+$as_echo "$am_cv_make_support_nested_variables" >&6; }
+if test $am_cv_make_support_nested_variables = yes; then
+    AM_V='$(V)'
+  AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+  AM_V=$AM_DEFAULT_VERBOSITY
+  AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
 AM_BACKSLASH='\'
 
 
-# This is required when using the de-ANSI-fication feature.
-DEPDIR="${am__leading_dot}deps"
+# Add configure option --enable-maintainer-mode which enables
+# dependency checking and generation useful to package maintainers.
+# This is made an option to avoid confusing end users.
 
-ac_config_commands="$ac_config_commands depfiles"
-
-
-am_make=${MAKE-make}
-cat > confinc << 'END'
-am__doit:
-	@echo this is the am__doit target
-.PHONY: am__doit
-END
-# If we don't find an include directive, just comment out the code.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
-$as_echo_n "checking for style of include used by $am_make... " >&6; }
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# Ignore all kinds of additional output from `make'.
-case `$am_make -s -f confmf 2> /dev/null` in #(
-*the\ am__doit\ target*)
-  am__include=include
-  am__quote=
-  _am_result=GNU
-  ;;
-esac
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
-   echo '.include "confinc"' > confmf
-   case `$am_make -s -f confmf 2> /dev/null` in #(
-   *the\ am__doit\ target*)
-     am__include=.include
-     am__quote="\""
-     _am_result=BSD
-     ;;
-   esac
-fi
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
-$as_echo "$_am_result" >&6; }
-rm -f confinc confmf
-
-# Check whether --enable-dependency-tracking was given.
-if test "${enable_dependency_tracking+set}" = set; then :
-  enableval=$enable_dependency_tracking;
-fi
-
-if test "x$enable_dependency_tracking" != xno; then
-  am_depcomp="$ac_aux_dir/depcomp"
-  AMDEPBACKSLASH='\'
-  am__nodep='_no'
-fi
- if test "x$enable_dependency_tracking" != xno; then
-  AMDEP_TRUE=
-  AMDEP_FALSE='#'
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5
+$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; }
+    # Check whether --enable-maintainer-mode was given.
+if test "${enable_maintainer_mode+set}" = set; then :
+  enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval
 else
-  AMDEP_TRUE='#'
-  AMDEP_FALSE=
+  USE_MAINTAINER_MODE=no
 fi
 
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5
+$as_echo "$USE_MAINTAINER_MODE" >&6; }
+   if test $USE_MAINTAINER_MODE = yes; then
+  MAINTAINER_MODE_TRUE=
+  MAINTAINER_MODE_FALSE='#'
+else
+  MAINTAINER_MODE_TRUE='#'
+  MAINTAINER_MODE_FALSE=
+fi
 
+  MAINT=$MAINTAINER_MODE_TRUE
+
+
+
+# Check for programs
 ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -2930,7 +2996,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_CC="${ac_tool_prefix}gcc"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -2970,7 +3036,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_CC="gcc"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -3023,7 +3089,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_CC="${ac_tool_prefix}cc"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -3064,7 +3130,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
        ac_prog_rejected=yes
        continue
@@ -3122,7 +3188,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -3166,7 +3232,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_CC="$ac_prog"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -3612,8 +3678,7 @@
 /* end confdefs.h.  */
 #include <stdarg.h>
 #include <stdio.h>
-#include <sys/types.h>
-#include <sys/stat.h>
+struct stat;
 /* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
 struct buf { int x; };
 FILE * (*rcsopen) (struct buf *, struct stat *, int);
@@ -3697,6 +3762,69 @@
 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
 ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
+DEPDIR="${am__leading_dot}deps"
+
+ac_config_commands="$ac_config_commands depfiles"
+
+
+am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+	@echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
+$as_echo_n "checking for style of include used by $am_make... " >&6; }
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from 'make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+  am__include=include
+  am__quote=
+  _am_result=GNU
+  ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+   echo '.include "confinc"' > confmf
+   case `$am_make -s -f confmf 2> /dev/null` in #(
+   *the\ am__doit\ target*)
+     am__include=.include
+     am__quote="\""
+     _am_result=BSD
+     ;;
+   esac
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
+$as_echo "$_am_result" >&6; }
+rm -f confinc confmf
+
+# Check whether --enable-dependency-tracking was given.
+if test "${enable_dependency_tracking+set}" = set; then :
+  enableval=$enable_dependency_tracking;
+fi
+
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+  am__nodep='_no'
+fi
+ if test "x$enable_dependency_tracking" != xno; then
+  AMDEP_TRUE=
+  AMDEP_FALSE='#'
+else
+  AMDEP_TRUE='#'
+  AMDEP_FALSE=
+fi
+
+
 
 depcc="$CC"   am_compiler_list=
 
@@ -3709,8 +3837,8 @@
   # We make a subdir and do the tests there.  Otherwise we can end up
   # making bogus files that we don't know about and never remove.  For
   # instance it was reported that on HP-UX the gcc test will end up
-  # making a dummy file named `D' -- because `-MD' means `put the output
-  # in D'.
+  # making a dummy file named 'D' -- because '-MD' means "put the output
+  # in D".
   rm -rf conftest.dir
   mkdir conftest.dir
   # Copy depcomp to subdir because otherwise we won't find it if we're
@@ -3745,16 +3873,16 @@
     : > sub/conftest.c
     for i in 1 2 3 4 5 6; do
       echo '#include "conftst'$i'.h"' >> sub/conftest.c
-      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
-      # Solaris 8's {/usr,}/bin/sh.
-      touch sub/conftst$i.h
+      # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+      # Solaris 10 /bin/sh.
+      echo '/* dummy */' > sub/conftst$i.h
     done
     echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
 
-    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # We check with '-c' and '-o' for the sake of the "dashmstdout"
     # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle `-M -o', and we need to detect this.  Also, some Intel
-    # versions had trouble with output in subdirs
+    # handle '-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs.
     am__obj=sub/conftest.${OBJEXT-o}
     am__minus_obj="-o $am__obj"
     case $depmode in
@@ -3763,8 +3891,8 @@
       test "$am__universal" = false || continue
       ;;
     nosideeffect)
-      # after this tag, mechanisms are not by side-effect, so they'll
-      # only be used when explicitly requested
+      # After this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested.
       if test "x$enable_dependency_tracking" = xyes; then
 	continue
       else
@@ -3772,1140 +3900,7 @@
       fi
       ;;
     msvc7 | msvc7msys | msvisualcpp | msvcmsys)
-      # This compiler won't grok `-c -o', but also, the minuso test has
-      # not run yet.  These depmodes are late enough in the game, and
-      # so weak that their functioning should not be impacted.
-      am__obj=conftest.${OBJEXT-o}
-      am__minus_obj=
-      ;;
-    none) break ;;
-    esac
-    if depmode=$depmode \
-       source=sub/conftest.c object=$am__obj \
-       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
-       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
-         >/dev/null 2>conftest.err &&
-       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
-       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
-      # icc doesn't choke on unknown options, it will just issue warnings
-      # or remarks (even with -Werror).  So we grep stderr for any message
-      # that says an option was ignored or not supported.
-      # When given -MP, icc 7.0 and 7.1 complain thusly:
-      #   icc: Command line warning: ignoring option '-M'; no argument required
-      # The diagnosis changed in icc 8.0:
-      #   icc: Command line remark: option '-MP' not supported
-      if (grep 'ignoring option' conftest.err ||
-          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
-        am_cv_CC_dependencies_compiler_type=$depmode
-        break
-      fi
-    fi
-  done
-
-  cd ..
-  rm -rf conftest.dir
-else
-  am_cv_CC_dependencies_compiler_type=none
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
-$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
-CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
-
- if
-  test "x$enable_dependency_tracking" != xno \
-  && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
-  am__fastdepCC_TRUE=
-  am__fastdepCC_FALSE='#'
-else
-  am__fastdepCC_TRUE='#'
-  am__fastdepCC_FALSE=
-fi
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for function prototypes" >&5
-$as_echo_n "checking for function prototypes... " >&6; }
-if test "$ac_cv_prog_cc_c89" != no; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-
-$as_echo "#define PROTOTYPES 1" >>confdefs.h
-
-
-$as_echo "#define __PROTOTYPES 1" >>confdefs.h
-
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
-$as_echo_n "checking how to run the C preprocessor... " >&6; }
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
-  CPP=
-fi
-if test -z "$CPP"; then
-  if ${ac_cv_prog_CPP+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-      # Double quotes because CPP needs to be expanded
-    for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
-    do
-      ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
-  # Use a header file that comes with gcc, so configuring glibc
-  # with a fresh cross-compiler works.
-  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-  # <limits.h> exists even on freestanding compilers.
-  # On the NeXT, cc -E runs the code through the compiler's parser,
-  # not just through cpp. "Syntax error" is here to catch this case.
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-		     Syntax error
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
-
-else
-  # Broken: fails on valid input.
-continue
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-
-  # OK, works on sane cases.  Now check whether nonexistent headers
-  # can be detected and how.
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <ac_nonexistent.h>
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
-  # Broken: success on invalid input.
-continue
-else
-  # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.i conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then :
-  break
-fi
-
-    done
-    ac_cv_prog_CPP=$CPP
-
-fi
-  CPP=$ac_cv_prog_CPP
-else
-  ac_cv_prog_CPP=$CPP
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
-$as_echo "$CPP" >&6; }
-ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
-  # Use a header file that comes with gcc, so configuring glibc
-  # with a fresh cross-compiler works.
-  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-  # <limits.h> exists even on freestanding compilers.
-  # On the NeXT, cc -E runs the code through the compiler's parser,
-  # not just through cpp. "Syntax error" is here to catch this case.
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-		     Syntax error
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
-
-else
-  # Broken: fails on valid input.
-continue
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-
-  # OK, works on sane cases.  Now check whether nonexistent headers
-  # can be detected and how.
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <ac_nonexistent.h>
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
-  # Broken: success on invalid input.
-continue
-else
-  # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.i conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then :
-
-else
-  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details" "$LINENO" 5; }
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
-$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
-if ${ac_cv_path_GREP+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -z "$GREP"; then
-  ac_path_GREP_found=false
-  # Loop through the user's path and test for each of PROGNAME-LIST
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_prog in grep ggrep; do
-    for ac_exec_ext in '' $ac_executable_extensions; do
-      ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
-      { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
-# Check for GNU ac_path_GREP and select it if it is found.
-  # Check for GNU $ac_path_GREP
-case `"$ac_path_GREP" --version 2>&1` in
-*GNU*)
-  ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
-*)
-  ac_count=0
-  $as_echo_n 0123456789 >"conftest.in"
-  while :
-  do
-    cat "conftest.in" "conftest.in" >"conftest.tmp"
-    mv "conftest.tmp" "conftest.in"
-    cp "conftest.in" "conftest.nl"
-    $as_echo 'GREP' >> "conftest.nl"
-    "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
-    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
-    as_fn_arith $ac_count + 1 && ac_count=$as_val
-    if test $ac_count -gt ${ac_path_GREP_max-0}; then
-      # Best one so far, save it but keep looking for a better one
-      ac_cv_path_GREP="$ac_path_GREP"
-      ac_path_GREP_max=$ac_count
-    fi
-    # 10*(2^10) chars as input seems more than enough
-    test $ac_count -gt 10 && break
-  done
-  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
-
-      $ac_path_GREP_found && break 3
-    done
-  done
-  done
-IFS=$as_save_IFS
-  if test -z "$ac_cv_path_GREP"; then
-    as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
-  fi
-else
-  ac_cv_path_GREP=$GREP
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
-$as_echo "$ac_cv_path_GREP" >&6; }
- GREP="$ac_cv_path_GREP"
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
-$as_echo_n "checking for egrep... " >&6; }
-if ${ac_cv_path_EGREP+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
-   then ac_cv_path_EGREP="$GREP -E"
-   else
-     if test -z "$EGREP"; then
-  ac_path_EGREP_found=false
-  # Loop through the user's path and test for each of PROGNAME-LIST
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_prog in egrep; do
-    for ac_exec_ext in '' $ac_executable_extensions; do
-      ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
-      { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
-# Check for GNU ac_path_EGREP and select it if it is found.
-  # Check for GNU $ac_path_EGREP
-case `"$ac_path_EGREP" --version 2>&1` in
-*GNU*)
-  ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
-*)
-  ac_count=0
-  $as_echo_n 0123456789 >"conftest.in"
-  while :
-  do
-    cat "conftest.in" "conftest.in" >"conftest.tmp"
-    mv "conftest.tmp" "conftest.in"
-    cp "conftest.in" "conftest.nl"
-    $as_echo 'EGREP' >> "conftest.nl"
-    "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
-    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
-    as_fn_arith $ac_count + 1 && ac_count=$as_val
-    if test $ac_count -gt ${ac_path_EGREP_max-0}; then
-      # Best one so far, save it but keep looking for a better one
-      ac_cv_path_EGREP="$ac_path_EGREP"
-      ac_path_EGREP_max=$ac_count
-    fi
-    # 10*(2^10) chars as input seems more than enough
-    test $ac_count -gt 10 && break
-  done
-  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
-
-      $ac_path_EGREP_found && break 3
-    done
-  done
-  done
-IFS=$as_save_IFS
-  if test -z "$ac_cv_path_EGREP"; then
-    as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
-  fi
-else
-  ac_cv_path_EGREP=$EGREP
-fi
-
-   fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
-$as_echo "$ac_cv_path_EGREP" >&6; }
- EGREP="$ac_cv_path_EGREP"
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
-$as_echo_n "checking for ANSI C header files... " >&6; }
-if ${ac_cv_header_stdc+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <stdlib.h>
-#include <stdarg.h>
-#include <string.h>
-#include <float.h>
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  ac_cv_header_stdc=yes
-else
-  ac_cv_header_stdc=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-if test $ac_cv_header_stdc = yes; then
-  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <string.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "memchr" >/dev/null 2>&1; then :
-
-else
-  ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
-  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <stdlib.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "free" >/dev/null 2>&1; then :
-
-else
-  ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
-  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
-  if test "$cross_compiling" = yes; then :
-  :
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <ctype.h>
-#include <stdlib.h>
-#if ((' ' & 0x0FF) == 0x020)
-# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-#else
-# define ISLOWER(c) \
-		   (('a' <= (c) && (c) <= 'i') \
-		     || ('j' <= (c) && (c) <= 'r') \
-		     || ('s' <= (c) && (c) <= 'z'))
-# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
-#endif
-
-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-int
-main ()
-{
-  int i;
-  for (i = 0; i < 256; i++)
-    if (XOR (islower (i), ISLOWER (i))
-	|| toupper (i) != TOUPPER (i))
-      return 2;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
-
-else
-  ac_cv_header_stdc=no
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
-  conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
-fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
-$as_echo "$ac_cv_header_stdc" >&6; }
-if test $ac_cv_header_stdc = yes; then
-
-$as_echo "#define STDC_HEADERS 1" >>confdefs.h
-
-fi
-
-# On IRIX 5.3, sys/types and inttypes.h are conflicting.
-for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
-		  inttypes.h stdint.h unistd.h
-do :
-  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
-"
-if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
-  cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-
-
-
-if test "$ac_cv_prog_cc_stdc" != no; then
-  U= ANSI2KNR=
-else
-  U=_ ANSI2KNR=./ansi2knr
-fi
-# Ensure some checks needed by ansi2knr itself.
-
-for ac_header in string.h
-do :
-  ac_fn_c_check_header_mongrel "$LINENO" "string.h" "ac_cv_header_string_h" "$ac_includes_default"
-if test "x$ac_cv_header_string_h" = xyes; then :
-  cat >>confdefs.h <<_ACEOF
-#define HAVE_STRING_H 1
-_ACEOF
-
-fi
-
-done
-
-
-
-# Add configure option --enable-maintainer-mode which enables
-# dependency checking and generation useful to package maintainers.
-# This is made an option to avoid confusing end users.
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5
-$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; }
-    # Check whether --enable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then :
-  enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval
-else
-  USE_MAINTAINER_MODE=no
-fi
-
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5
-$as_echo "$USE_MAINTAINER_MODE" >&6; }
-   if test $USE_MAINTAINER_MODE = yes; then
-  MAINTAINER_MODE_TRUE=
-  MAINTAINER_MODE_FALSE='#'
-else
-  MAINTAINER_MODE_TRUE='#'
-  MAINTAINER_MODE_FALSE=
-fi
-
-  MAINT=$MAINTAINER_MODE_TRUE
-
-
-
-# Check for programs
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}gcc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_CC="${ac_tool_prefix}gcc"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_CC"; then
-  ac_ct_CC=$CC
-  # Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_CC+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_CC"; then
-  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_CC="gcc"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
-$as_echo "$ac_ct_CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_CC" = x; then
-    CC=""
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    CC=$ac_ct_CC
-  fi
-else
-  CC="$ac_cv_prog_CC"
-fi
-
-if test -z "$CC"; then
-          if test -n "$ac_tool_prefix"; then
-    # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}cc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_CC="${ac_tool_prefix}cc"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-  fi
-fi
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  ac_prog_rejected=no
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
-       ac_prog_rejected=yes
-       continue
-     fi
-    ac_cv_prog_CC="cc"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# != 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
-  fi
-fi
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$CC"; then
-  if test -n "$ac_tool_prefix"; then
-  for ac_prog in cl.exe
-  do
-    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-    test -n "$CC" && break
-  done
-fi
-if test -z "$CC"; then
-  ac_ct_CC=$CC
-  for ac_prog in cl.exe
-do
-  # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_CC+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_CC"; then
-  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_CC="$ac_prog"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
-$as_echo "$ac_ct_CC" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-  test -n "$ac_ct_CC" && break
-done
-
-  if test "x$ac_ct_CC" = x; then
-    CC=""
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    CC=$ac_ct_CC
-  fi
-fi
-
-fi
-
-
-test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "no acceptable C compiler found in \$PATH
-See \`config.log' for more details" "$LINENO" 5; }
-
-# Provide some information about the compiler.
-$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
-set X $ac_compile
-ac_compiler=$2
-for ac_option in --version -v -V -qversion; do
-  { { ac_try="$ac_compiler $ac_option >&5"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
-  ac_status=$?
-  if test -s conftest.err; then
-    sed '10a\
-... rest of stderr output deleted ...
-         10q' conftest.err >conftest.er1
-    cat conftest.er1 >&5
-  fi
-  rm -f conftest.er1 conftest.err
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }
-done
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
-$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
-if ${ac_cv_c_compiler_gnu+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-#ifndef __GNUC__
-       choke me
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  ac_compiler_gnu=yes
-else
-  ac_compiler_gnu=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_c_compiler_gnu=$ac_compiler_gnu
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
-$as_echo "$ac_cv_c_compiler_gnu" >&6; }
-if test $ac_compiler_gnu = yes; then
-  GCC=yes
-else
-  GCC=
-fi
-ac_test_CFLAGS=${CFLAGS+set}
-ac_save_CFLAGS=$CFLAGS
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
-$as_echo_n "checking whether $CC accepts -g... " >&6; }
-if ${ac_cv_prog_cc_g+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_save_c_werror_flag=$ac_c_werror_flag
-   ac_c_werror_flag=yes
-   ac_cv_prog_cc_g=no
-   CFLAGS="-g"
-   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  ac_cv_prog_cc_g=yes
-else
-  CFLAGS=""
-      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-
-else
-  ac_c_werror_flag=$ac_save_c_werror_flag
-	 CFLAGS="-g"
-	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  ac_cv_prog_cc_g=yes
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-   ac_c_werror_flag=$ac_save_c_werror_flag
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
-$as_echo "$ac_cv_prog_cc_g" >&6; }
-if test "$ac_test_CFLAGS" = set; then
-  CFLAGS=$ac_save_CFLAGS
-elif test $ac_cv_prog_cc_g = yes; then
-  if test "$GCC" = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-g"
-  fi
-else
-  if test "$GCC" = yes; then
-    CFLAGS="-O2"
-  else
-    CFLAGS=
-  fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
-$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
-if ${ac_cv_prog_cc_c89+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_cv_prog_cc_c89=no
-ac_save_CC=$CC
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <stdarg.h>
-#include <stdio.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
-struct buf { int x; };
-FILE * (*rcsopen) (struct buf *, struct stat *, int);
-static char *e (p, i)
-     char **p;
-     int i;
-{
-  return p[i];
-}
-static char *f (char * (*g) (char **, int), char **p, ...)
-{
-  char *s;
-  va_list v;
-  va_start (v,p);
-  s = g (p, va_arg (v,int));
-  va_end (v);
-  return s;
-}
-
-/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
-   function prototypes and stuff, but not '\xHH' hex character constants.
-   These don't provoke an error unfortunately, instead are silently treated
-   as 'x'.  The following induces an error, until -std is added to get
-   proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
-   array size at least.  It's necessary to write '\x00'==0 to get something
-   that's true only with -std.  */
-int osf4_cc_array ['\x00' == 0 ? 1 : -1];
-
-/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
-   inside strings and character constants.  */
-#define FOO(x) 'x'
-int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
-
-int test (int i, double x);
-struct s1 {int (*f) (int a);};
-struct s2 {int (*f) (double a);};
-int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-int argc;
-char **argv;
-int
-main ()
-{
-return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
-  ;
-  return 0;
-}
-_ACEOF
-for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
-	-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-do
-  CC="$ac_save_CC $ac_arg"
-  if ac_fn_c_try_compile "$LINENO"; then :
-  ac_cv_prog_cc_c89=$ac_arg
-fi
-rm -f core conftest.err conftest.$ac_objext
-  test "x$ac_cv_prog_cc_c89" != "xno" && break
-done
-rm -f conftest.$ac_ext
-CC=$ac_save_CC
-
-fi
-# AC_CACHE_VAL
-case "x$ac_cv_prog_cc_c89" in
-  x)
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
-$as_echo "none needed" >&6; } ;;
-  xno)
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
-$as_echo "unsupported" >&6; } ;;
-  *)
-    CC="$CC $ac_cv_prog_cc_c89"
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
-$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
-esac
-if test "x$ac_cv_prog_cc_c89" != xno; then :
-
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-depcc="$CC"   am_compiler_list=
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
-$as_echo_n "checking dependency style of $depcc... " >&6; }
-if ${am_cv_CC_dependencies_compiler_type+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
-  # We make a subdir and do the tests there.  Otherwise we can end up
-  # making bogus files that we don't know about and never remove.  For
-  # instance it was reported that on HP-UX the gcc test will end up
-  # making a dummy file named `D' -- because `-MD' means `put the output
-  # in D'.
-  rm -rf conftest.dir
-  mkdir conftest.dir
-  # Copy depcomp to subdir because otherwise we won't find it if we're
-  # using a relative directory.
-  cp "$am_depcomp" conftest.dir
-  cd conftest.dir
-  # We will build objects and dependencies in a subdirectory because
-  # it helps to detect inapplicable dependency modes.  For instance
-  # both Tru64's cc and ICC support -MD to output dependencies as a
-  # side effect of compilation, but ICC will put the dependencies in
-  # the current directory while Tru64 will put them in the object
-  # directory.
-  mkdir sub
-
-  am_cv_CC_dependencies_compiler_type=none
-  if test "$am_compiler_list" = ""; then
-     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
-  fi
-  am__universal=false
-  case " $depcc " in #(
-     *\ -arch\ *\ -arch\ *) am__universal=true ;;
-     esac
-
-  for depmode in $am_compiler_list; do
-    # Setup a source with many dependencies, because some compilers
-    # like to wrap large dependency lists on column 80 (with \), and
-    # we should not choose a depcomp mode which is confused by this.
-    #
-    # We need to recreate these files for each test, as the compiler may
-    # overwrite some of them when testing with obscure command lines.
-    # This happens at least with the AIX C compiler.
-    : > sub/conftest.c
-    for i in 1 2 3 4 5 6; do
-      echo '#include "conftst'$i'.h"' >> sub/conftest.c
-      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
-      # Solaris 8's {/usr,}/bin/sh.
-      touch sub/conftst$i.h
-    done
-    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
-    # We check with `-c' and `-o' for the sake of the "dashmstdout"
-    # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle `-M -o', and we need to detect this.  Also, some Intel
-    # versions had trouble with output in subdirs
-    am__obj=sub/conftest.${OBJEXT-o}
-    am__minus_obj="-o $am__obj"
-    case $depmode in
-    gcc)
-      # This depmode causes a compiler race in universal mode.
-      test "$am__universal" = false || continue
-      ;;
-    nosideeffect)
-      # after this tag, mechanisms are not by side-effect, so they'll
-      # only be used when explicitly requested
-      if test "x$enable_dependency_tracking" = xyes; then
-	continue
-      else
-	break
-      fi
-      ;;
-    msvc7 | msvc7msys | msvisualcpp | msvcmsys)
-      # This compiler won't grok `-c -o', but also, the minuso test has
+      # This compiler won't grok '-c -o', but also, the minuso test has
       # not run yet.  These depmodes are late enough in the game, and
       # so weak that their functioning should not be impacted.
       am__obj=conftest.${OBJEXT-o}
@@ -5109,7 +4104,7 @@
   return 0;
 }
 _ACEOF
-for ac_arg in '' -std=gnu99 -std=c99 -c99 -AC99 -xc99=all -qlanglvl=extc99
+for ac_arg in '' -std=gnu99 -std=c99 -c99 -AC99 -D_STDC_C99= -qlanglvl=extc99
 do
   CC="$ac_save_CC $ac_arg"
   if ac_fn_c_try_compile "$LINENO"; then :
@@ -5149,8 +4144,7 @@
 /* end confdefs.h.  */
 #include <stdarg.h>
 #include <stdio.h>
-#include <sys/types.h>
-#include <sys/stat.h>
+struct stat;
 /* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
 struct buf { int x; };
 FILE * (*rcsopen) (struct buf *, struct stat *, int);
@@ -5433,6 +4427,167 @@
 fi
 
 
+if test -n "$ac_tool_prefix"; then
+  for ac_prog in ar lib "link -lib"
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AR+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AR"; then
+  ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_AR="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
+$as_echo "$AR" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$AR" && break
+  done
+fi
+if test -z "$AR"; then
+  ac_ct_AR=$AR
+  for ac_prog in ar lib "link -lib"
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_AR+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_AR"; then
+  ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_AR="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
+$as_echo "$ac_ct_AR" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_AR" && break
+done
+
+  if test "x$ac_ct_AR" = x; then
+    AR="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    AR=$ac_ct_AR
+  fi
+fi
+
+: ${AR=ar}
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the archiver ($AR) interface" >&5
+$as_echo_n "checking the archiver ($AR) interface... " >&6; }
+if ${am_cv_ar_interface+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  am_cv_ar_interface=ar
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+int some_variable = 0;
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  am_ar_try='$AR cru libconftest.a conftest.$ac_objext >&5'
+      { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$am_ar_try\""; } >&5
+  (eval $am_ar_try) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+      if test "$ac_status" -eq 0; then
+        am_cv_ar_interface=ar
+      else
+        am_ar_try='$AR -NOLOGO -OUT:conftest.lib conftest.$ac_objext >&5'
+        { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$am_ar_try\""; } >&5
+  (eval $am_ar_try) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+        if test "$ac_status" -eq 0; then
+          am_cv_ar_interface=lib
+        else
+          am_cv_ar_interface=unknown
+        fi
+      fi
+      rm -f conftest.lib libconftest.a
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_ar_interface" >&5
+$as_echo "$am_cv_ar_interface" >&6; }
+
+case $am_cv_ar_interface in
+ar)
+  ;;
+lib)
+  # Microsoft lib, so override with the ar-lib wrapper script.
+  # FIXME: It is wrong to rewrite AR.
+  # But if we don't then we get into trouble of one sort or another.
+  # A longer-term fix would be to have automake use am__AR in this case,
+  # and then we could set am__AR="$am_aux_dir/ar-lib \$(AR)" or something
+  # similar.
+  AR="$am_aux_dir/ar-lib $AR"
+  ;;
+unknown)
+  as_fn_error $? "could not determine $AR interface" "$LINENO" 5
+  ;;
+esac
+
+
 # Check if LD supports linker scripts,
 # and define automake conditional HAVE_LD_VERSION_SCRIPT if so.
 # Check whether --enable-ld-version-script was given.
@@ -5535,6 +4690,266 @@
 fi
 
 # Check header files
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
+$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
+if ${ac_cv_path_GREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$GREP"; then
+  ac_path_GREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in grep ggrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
+      as_fn_executable_p "$ac_path_GREP" || continue
+# Check for GNU ac_path_GREP and select it if it is found.
+  # Check for GNU $ac_path_GREP
+case `"$ac_path_GREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'GREP' >> "conftest.nl"
+    "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_GREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_GREP="$ac_path_GREP"
+      ac_path_GREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_GREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_GREP"; then
+    as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_GREP=$GREP
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
+$as_echo "$ac_cv_path_GREP" >&6; }
+ GREP="$ac_cv_path_GREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
+$as_echo_n "checking for egrep... " >&6; }
+if ${ac_cv_path_EGREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
+   then ac_cv_path_EGREP="$GREP -E"
+   else
+     if test -z "$EGREP"; then
+  ac_path_EGREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in egrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
+      as_fn_executable_p "$ac_path_EGREP" || continue
+# Check for GNU ac_path_EGREP and select it if it is found.
+  # Check for GNU $ac_path_EGREP
+case `"$ac_path_EGREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'EGREP' >> "conftest.nl"
+    "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_EGREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_EGREP="$ac_path_EGREP"
+      ac_path_EGREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_EGREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_EGREP"; then
+    as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_EGREP=$EGREP
+fi
+
+   fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
+$as_echo "$ac_cv_path_EGREP" >&6; }
+ EGREP="$ac_cv_path_EGREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
+$as_echo_n "checking for ANSI C header files... " >&6; }
+if ${ac_cv_header_stdc+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_header_stdc=yes
+else
+  ac_cv_header_stdc=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "memchr" >/dev/null 2>&1; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "free" >/dev/null 2>&1; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+  if test "$cross_compiling" = yes; then :
+  :
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ctype.h>
+#include <stdlib.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+		   (('a' <= (c) && (c) <= 'i') \
+		     || ('j' <= (c) && (c) <= 'r') \
+		     || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+  int i;
+  for (i = 0; i < 256; i++)
+    if (XOR (islower (i), ISLOWER (i))
+	|| toupper (i) != TOUPPER (i))
+      return 2;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
+$as_echo "$ac_cv_header_stdc" >&6; }
+if test $ac_cv_header_stdc = yes; then
+
+$as_echo "#define STDC_HEADERS 1" >>confdefs.h
+
+fi
+
+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+		  inttypes.h stdint.h unistd.h
+do :
+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
+"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
 for ac_header in stddef.h stdlib.h locale.h
 do :
   as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
@@ -5736,11 +5151,11 @@
 int
 main ()
 {
-/* FIXME: Include the comments suggested by Paul. */
+
 #ifndef __cplusplus
-  /* Ultrix mips cc rejects this.  */
+  /* Ultrix mips cc rejects this sort of thing.  */
   typedef int charset[2];
-  const charset cs;
+  const charset cs = { 0, 0 };
   /* SunOS 4.1.1 cc rejects this.  */
   char const *const *pcpcc;
   char **ppc;
@@ -5757,8 +5172,9 @@
   ++pcpcc;
   ppc = (char**) pcpcc;
   pcpcc = (char const *const *) ppc;
-  { /* SCO 3.2v4 cc rejects this.  */
-    char *t;
+  { /* SCO 3.2v4 cc rejects this sort of thing.  */
+    char tx;
+    char *t = &tx;
     char const *s = 0 ? (char *) 0 : (char const *) 0;
 
     *t++ = 0;
@@ -5774,10 +5190,10 @@
     iptr p = 0;
     ++p;
   }
-  { /* AIX XL C 1.02.0.0 rejects this saying
+  { /* AIX XL C 1.02.0.0 rejects this sort of thing, saying
        "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
-    struct s { int j; const int *ap[3]; };
-    struct s *b; b->j = 5;
+    struct s { int j; const int *ap[3]; } bx;
+    struct s *b = &bx; b->j = 5;
   }
   { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
     const int foo = 10;
@@ -5937,6 +5353,10 @@
   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
+#ifdef HAVE_STDLIB_H
+#include <stdlib.h>
+#endif
+#include <stdio.h>
 #ifdef HAVE_PROTOTYPES
 int is_char_signed (int arg)
 #else
@@ -5982,6 +5402,10 @@
   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
+#ifdef HAVE_STDLIB_H
+#include <stdlib.h>
+#endif
+#include <stdio.h>
 #ifdef HAVE_PROTOTYPES
 int is_shifting_signed (long arg)
 #else
@@ -6033,6 +5457,9 @@
   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
+#ifdef HAVE_STDLIB_H
+#include <stdlib.h>
+#endif
 #include <stdio.h>
 int main() {
   if (fopen("conftestdata", "wb") != NULL)
@@ -6077,7 +5504,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_AS="${ac_tool_prefix}as"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -6117,7 +5544,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_AS="as"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -6169,7 +5596,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -6209,7 +5636,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_DLLTOOL="dlltool"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -6261,7 +5688,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -6301,7 +5728,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_OBJDUMP="objdump"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -6475,7 +5902,7 @@
     for ac_prog in sed gsed; do
     for ac_exec_ext in '' $ac_executable_extensions; do
       ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
-      { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue
+      as_fn_executable_p "$ac_path_SED" || continue
 # Check for GNU ac_path_SED and select it if it is found.
   # Check for GNU $ac_path_SED
 case `"$ac_path_SED" --version 2>&1` in
@@ -6554,7 +5981,7 @@
     for ac_prog in fgrep; do
     for ac_exec_ext in '' $ac_executable_extensions; do
       ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
-      { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue
+      as_fn_executable_p "$ac_path_FGREP" || continue
 # Check for GNU ac_path_FGREP and select it if it is found.
   # Check for GNU $ac_path_FGREP
 case `"$ac_path_FGREP" --version 2>&1` in
@@ -6810,7 +6237,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -6854,7 +6281,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_DUMPBIN="$ac_prog"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -7267,7 +6694,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -7307,7 +6734,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_OBJDUMP="objdump"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -7610,7 +7037,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -7650,7 +7077,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_DLLTOOL="dlltool"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -7750,7 +7177,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_AR="$ac_tool_prefix$ac_prog"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -7794,7 +7221,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_AR="$ac_prog"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -7919,7 +7346,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_STRIP="${ac_tool_prefix}strip"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -7959,7 +7386,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_STRIP="strip"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -8018,7 +7445,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -8058,7 +7485,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_RANLIB="ranlib"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -8707,7 +8134,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -8747,7 +8174,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_MANIFEST_TOOL="mt"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -8827,7 +8254,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -8867,7 +8294,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -8919,7 +8346,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -8959,7 +8386,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_NMEDIT="nmedit"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -9011,7 +8438,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_LIPO="${ac_tool_prefix}lipo"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -9051,7 +8478,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_LIPO="lipo"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -9103,7 +8530,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_OTOOL="${ac_tool_prefix}otool"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -9143,7 +8570,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_OTOOL="otool"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -9195,7 +8622,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -9235,7 +8662,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_OTOOL64="otool64"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -13636,6 +13063,7 @@
 
 ac_libobjs=
 ac_ltlibobjs=
+U=
 for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
   # 1. Remove the extension, and $U if already installed.
   ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
@@ -13650,6 +13078,14 @@
 LTLIBOBJS=$ac_ltlibobjs
 
 
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5
+$as_echo_n "checking that generated files are newer than configure... " >&6; }
+   if test -n "$am_sleep_pid"; then
+     # Hide warnings about reused PIDs.
+     wait $am_sleep_pid 2>/dev/null
+   fi
+   { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5
+$as_echo "done" >&6; }
  if test -n "$EXEEXT"; then
   am__EXEEXT_TRUE=
   am__EXEEXT_FALSE='#'
@@ -13658,18 +13094,14 @@
   am__EXEEXT_FALSE=
 fi
 
-if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
-  as_fn_error $? "conditional \"AMDEP\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
-if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
-  as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
 if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then
   as_fn_error $? "conditional \"MAINTAINER_MODE\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
+if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
+  as_fn_error $? "conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
 if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
   as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
@@ -13976,16 +13408,16 @@
     # ... but there are two gotchas:
     # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
     # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-    # In both cases, we have to default to `cp -p'.
+    # In both cases, we have to default to `cp -pR'.
     ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
-      as_ln_s='cp -p'
+      as_ln_s='cp -pR'
   elif ln conf$$.file conf$$ 2>/dev/null; then
     as_ln_s=ln
   else
-    as_ln_s='cp -p'
+    as_ln_s='cp -pR'
   fi
 else
-  as_ln_s='cp -p'
+  as_ln_s='cp -pR'
 fi
 rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
 rmdir conf$$.dir 2>/dev/null
@@ -14045,28 +13477,16 @@
   as_mkdir_p=false
 fi
 
-if test -x / >/dev/null 2>&1; then
-  as_test_x='test -x'
-else
-  if ls -dL / >/dev/null 2>&1; then
-    as_ls_L_option=L
-  else
-    as_ls_L_option=
-  fi
-  as_test_x='
-    eval sh -c '\''
-      if test -d "$1"; then
-	test -d "$1/.";
-      else
-	case $1 in #(
-	-*)set "./$1";;
-	esac;
-	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
-	???[sx]*):;;*)false;;esac;fi
-    '\'' sh
-  '
-fi
-as_executable_p=$as_test_x
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+  test -f "$1" && test -x "$1"
+} # as_fn_executable_p
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
 
 # Sed expression to map a string onto a valid CPP name.
 as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
@@ -14087,8 +13507,8 @@
 # report actual input values of CONFIG_FILES etc. instead of their
 # values after options handling.
 ac_log="
-This file was extended by libjpeg $as_me 8.4.0, which was
-generated by GNU Autoconf 2.68.  Invocation command line was
+This file was extended by libjpeg $as_me 9.0.0, which was
+generated by GNU Autoconf 2.69.  Invocation command line was
 
   CONFIG_FILES    = $CONFIG_FILES
   CONFIG_HEADERS  = $CONFIG_HEADERS
@@ -14153,11 +13573,11 @@
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
 ac_cs_version="\\
-libjpeg config.status 8.4.0
-configured by $0, generated by GNU Autoconf 2.68,
+libjpeg config.status 9.0.0
+configured by $0, generated by GNU Autoconf 2.69,
   with options \\"\$ac_cs_config\\"
 
-Copyright (C) 2010 Free Software Foundation, Inc.
+Copyright (C) 2012 Free Software Foundation, Inc.
 This config.status script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it."
 
@@ -14248,7 +13668,7 @@
 _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 if \$ac_cs_recheck; then
-  set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+  set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
   shift
   \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
   CONFIG_SHELL='$SHELL'
@@ -15161,7 +14581,7 @@
 
   case $ac_file$ac_mode in
     "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
-  # Autoconf 2.62 quotes --file arguments for eval, but not when files
+  # Older Autoconf quotes --file arguments for eval, but not when files
   # are listed without --file.  Let's play safe and only enable the eval
   # if we detect the quoting.
   case $CONFIG_FILES in
@@ -15174,7 +14594,7 @@
     # Strip MF so we end up with the name of the file.
     mf=`echo "$mf" | sed -e 's/:.*$//'`
     # Check whether this is an Automake generated Makefile or not.
-    # We used to match only the files named `Makefile.in', but
+    # We used to match only the files named 'Makefile.in', but
     # some people rename them; so instead we look at the file content.
     # Grep'ing the first line is not enough: some people post-process
     # each Makefile.in and add a new line on top of each file to say so.
@@ -15208,21 +14628,19 @@
       continue
     fi
     # Extract the definition of DEPDIR, am__include, and am__quote
-    # from the Makefile without running `make'.
+    # from the Makefile without running 'make'.
     DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
     test -z "$DEPDIR" && continue
     am__include=`sed -n 's/^am__include = //p' < "$mf"`
     test -z "am__include" && continue
     am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
-    # When using ansi2knr, U may be empty or an underscore; expand it
-    U=`sed -n 's/^U = //p' < "$mf"`
     # Find all dependency output files, they are included files with
     # $(DEPDIR) in their names.  We invoke sed twice because it is the
     # simplest approach to changing $(DEPDIR) to its actual value in the
     # expansion.
     for file in `sed -n "
       s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
-	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
       # Make sure the directory exists.
       test -f "$dirpart/$file" && continue
       fdir=`$as_dirname -- "$file" ||
diff --git a/configure.ac b/configure.ac
index 12293b0..e0cc36b 100644
--- a/configure.ac
+++ b/configure.ac
@@ -5,7 +5,7 @@
 # Configure script for IJG libjpeg
 #
 
-AC_INIT([libjpeg], [8.4.0])
+AC_INIT([libjpeg], [9.0.0])
 
 # Directory where autotools helper scripts lives.
 AC_CONFIG_AUX_DIR([.])
@@ -21,16 +21,13 @@
 
 # Initialize Automake
 # Don't require all the GNU mandated files
-AM_INIT_AUTOMAKE([-Wall -Werror -Wno-obsolete ansi2knr no-dist foreign])
+AM_INIT_AUTOMAKE([-Wall -Werror no-dist foreign])
 
 # Make --enable-silent-rules the default.
 # To get verbose build output you may configure
 # with --disable-silent-rules or use "make V=1".
 AM_SILENT_RULES([yes])
 
-# This is required when using the de-ANSI-fication feature.
-AM_C_PROTOTYPES
-
 # Add configure option --enable-maintainer-mode which enables
 # dependency checking and generation useful to package maintainers.
 # This is made an option to avoid confusing end users.
@@ -43,6 +40,7 @@
 AC_PROG_INSTALL
 AC_PROG_MAKE_SET
 AC_PROG_LN_S
+AM_PROG_AR
 
 # Check if LD supports linker scripts,
 # and define automake conditional HAVE_LD_VERSION_SCRIPT if so.
@@ -225,6 +223,10 @@
 # Run-time checks
 AC_MSG_CHECKING([to see if char is signed])
 AC_TRY_RUN([
+#ifdef HAVE_STDLIB_H
+#include <stdlib.h>
+#endif
+#include <stdio.h>
 #ifdef HAVE_PROTOTYPES
 int is_char_signed (int arg)
 #else
@@ -254,6 +256,10 @@
 
 AC_MSG_CHECKING([to see if right shift is signed])
 AC_TRY_RUN([
+#ifdef HAVE_STDLIB_H
+#include <stdlib.h>
+#endif
+#include <stdio.h>
 #ifdef HAVE_PROTOTYPES
 int is_shifting_signed (long arg)
 #else
@@ -288,6 +294,9 @@
 
 AC_MSG_CHECKING([to see if fopen accepts b spec])
 AC_TRY_RUN([
+#ifdef HAVE_STDLIB_H
+#include <stdlib.h>
+#endif
 #include <stdio.h>
 int main() {
   if (fopen("conftestdata", "wb") != NULL)
diff --git a/depcomp b/depcomp
index bd0ac08..06b0882 100755
--- a/depcomp
+++ b/depcomp
@@ -1,10 +1,9 @@
 #! /bin/sh
 # depcomp - compile a program generating dependencies as side-effects
 
-scriptversion=2011-12-04.11; # UTC
+scriptversion=2012-10-18.11; # UTC
 
-# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009, 2010,
-# 2011 Free Software Foundation, Inc.
+# Copyright (C) 1999-2013 Free Software Foundation, Inc.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -28,9 +27,9 @@
 
 case $1 in
   '')
-     echo "$0: No command.  Try \`$0 --help' for more information." 1>&2
-     exit 1;
-     ;;
+    echo "$0: No command.  Try '$0 --help' for more information." 1>&2
+    exit 1;
+    ;;
   -h | --h*)
     cat <<\EOF
 Usage: depcomp [--help] [--version] PROGRAM [ARGS]
@@ -40,8 +39,8 @@
 
 Environment variables:
   depmode     Dependency tracking mode.
-  source      Source file read by `PROGRAMS ARGS'.
-  object      Object file output by `PROGRAMS ARGS'.
+  source      Source file read by 'PROGRAMS ARGS'.
+  object      Object file output by 'PROGRAMS ARGS'.
   DEPDIR      directory where to store dependencies.
   depfile     Dependency file to output.
   tmpdepfile  Temporary file to use when outputting dependencies.
@@ -57,6 +56,66 @@
     ;;
 esac
 
+# Get the directory component of the given path, and save it in the
+# global variables '$dir'.  Note that this directory component will
+# be either empty or ending with a '/' character.  This is deliberate.
+set_dir_from ()
+{
+  case $1 in
+    */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;;
+      *) dir=;;
+  esac
+}
+
+# Get the suffix-stripped basename of the given path, and save it the
+# global variable '$base'.
+set_base_from ()
+{
+  base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'`
+}
+
+# If no dependency file was actually created by the compiler invocation,
+# we still have to create a dummy depfile, to avoid errors with the
+# Makefile "include basename.Plo" scheme.
+make_dummy_depfile ()
+{
+  echo "#dummy" > "$depfile"
+}
+
+# Factor out some common post-processing of the generated depfile.
+# Requires the auxiliary global variable '$tmpdepfile' to be set.
+aix_post_process_depfile ()
+{
+  # If the compiler actually managed to produce a dependency file,
+  # post-process it.
+  if test -f "$tmpdepfile"; then
+    # Each line is of the form 'foo.o: dependency.h'.
+    # Do two passes, one to just change these to
+    #   $object: dependency.h
+    # and one to simply output
+    #   dependency.h:
+    # which is needed to avoid the deleted-header problem.
+    { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile"
+      sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile"
+    } > "$depfile"
+    rm -f "$tmpdepfile"
+  else
+    make_dummy_depfile
+  fi
+}
+
+# A tabulation character.
+tab='	'
+# A newline character.
+nl='
+'
+# Character ranges might be problematic outside the C locale.
+# These definitions help.
+upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ
+lower=abcdefghijklmnopqrstuvwxyz
+digits=0123456789
+alpha=${upper}${lower}
+
 if test -z "$depmode" || test -z "$source" || test -z "$object"; then
   echo "depcomp: Variables source, object and depmode must be set" 1>&2
   exit 1
@@ -69,6 +128,9 @@
 
 rm -f "$tmpdepfile"
 
+# Avoid interferences from the environment.
+gccflag= dashmflag=
+
 # Some modes work just like other modes, but use different flags.  We
 # parameterize here, but still list the modes in the big case below,
 # to make depend.m4 easier to write.  Note that we *cannot* use a case
@@ -80,26 +142,32 @@
 fi
 
 if test "$depmode" = dashXmstdout; then
-   # This is just like dashmstdout with a different argument.
-   dashmflag=-xM
-   depmode=dashmstdout
+  # This is just like dashmstdout with a different argument.
+  dashmflag=-xM
+  depmode=dashmstdout
 fi
 
 cygpath_u="cygpath -u -f -"
 if test "$depmode" = msvcmsys; then
-   # This is just like msvisualcpp but w/o cygpath translation.
-   # Just convert the backslash-escaped backslashes to single forward
-   # slashes to satisfy depend.m4
-   cygpath_u='sed s,\\\\,/,g'
-   depmode=msvisualcpp
+  # This is just like msvisualcpp but w/o cygpath translation.
+  # Just convert the backslash-escaped backslashes to single forward
+  # slashes to satisfy depend.m4
+  cygpath_u='sed s,\\\\,/,g'
+  depmode=msvisualcpp
 fi
 
 if test "$depmode" = msvc7msys; then
-   # This is just like msvc7 but w/o cygpath translation.
-   # Just convert the backslash-escaped backslashes to single forward
-   # slashes to satisfy depend.m4
-   cygpath_u='sed s,\\\\,/,g'
-   depmode=msvc7
+  # This is just like msvc7 but w/o cygpath translation.
+  # Just convert the backslash-escaped backslashes to single forward
+  # slashes to satisfy depend.m4
+  cygpath_u='sed s,\\\\,/,g'
+  depmode=msvc7
+fi
+
+if test "$depmode" = xlc; then
+  # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information.
+  gccflag=-qmakedep=gcc,-MF
+  depmode=gcc
 fi
 
 case "$depmode" in
@@ -122,8 +190,7 @@
   done
   "$@"
   stat=$?
-  if test $stat -eq 0; then :
-  else
+  if test $stat -ne 0; then
     rm -f "$tmpdepfile"
     exit $stat
   fi
@@ -131,13 +198,17 @@
   ;;
 
 gcc)
+## Note that this doesn't just cater to obsosete pre-3.x GCC compilers.
+## but also to in-use compilers like IMB xlc/xlC and the HP C compiler.
+## (see the conditional assignment to $gccflag above).
 ## There are various ways to get dependency output from gcc.  Here's
 ## why we pick this rather obscure method:
 ## - Don't want to use -MD because we'd like the dependencies to end
 ##   up in a subdir.  Having to rename by hand is ugly.
 ##   (We might end up doing this anyway to support other compilers.)
 ## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
-##   -MM, not -M (despite what the docs say).
+##   -MM, not -M (despite what the docs say).  Also, it might not be
+##   supported by the other compilers which use the 'gcc' depmode.
 ## - Using -M directly means running the compiler twice (even worse
 ##   than renaming).
   if test -z "$gccflag"; then
@@ -145,33 +216,31 @@
   fi
   "$@" -Wp,"$gccflag$tmpdepfile"
   stat=$?
-  if test $stat -eq 0; then :
-  else
+  if test $stat -ne 0; then
     rm -f "$tmpdepfile"
     exit $stat
   fi
   rm -f "$depfile"
   echo "$object : \\" > "$depfile"
-  alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
-## The second -e expression handles DOS-style file names with drive letters.
+  # The second -e expression handles DOS-style file names with drive
+  # letters.
   sed -e 's/^[^:]*: / /' \
       -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
-## This next piece of magic avoids the `deleted header file' problem.
+## This next piece of magic avoids the "deleted header file" problem.
 ## The problem is that when a header file which appears in a .P file
 ## is deleted, the dependency causes make to die (because there is
 ## typically no way to rebuild the header).  We avoid this by adding
 ## dummy dependencies for each header file.  Too bad gcc doesn't do
 ## this for us directly.
-  tr ' ' '
-' < "$tmpdepfile" |
-## Some versions of gcc put a space before the `:'.  On the theory
+## Some versions of gcc put a space before the ':'.  On the theory
 ## that the space means something, we add a space to the output as
 ## well.  hp depmode also adds that space, but also prefixes the VPATH
 ## to the object.  Take care to not repeat it in the output.
 ## Some versions of the HPUX 10.20 sed can't process this invocation
 ## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
-      | sed -e 's/$/ :/' >> "$depfile"
+  tr ' ' "$nl" < "$tmpdepfile" \
+    | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
+    | sed -e 's/$/ :/' >> "$depfile"
   rm -f "$tmpdepfile"
   ;;
 
@@ -189,8 +258,7 @@
     "$@" -MDupdate "$tmpdepfile"
   fi
   stat=$?
-  if test $stat -eq 0; then :
-  else
+  if test $stat -ne 0; then
     rm -f "$tmpdepfile"
     exit $stat
   fi
@@ -198,43 +266,41 @@
 
   if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
     echo "$object : \\" > "$depfile"
-
     # Clip off the initial element (the dependent).  Don't try to be
     # clever and replace this with sed code, as IRIX sed won't handle
     # lines with more than a fixed number of characters (4096 in
     # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
-    # the IRIX cc adds comments like `#:fec' to the end of the
+    # the IRIX cc adds comments like '#:fec' to the end of the
     # dependency line.
-    tr ' ' '
-' < "$tmpdepfile" \
-    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
-    tr '
-' ' ' >> "$depfile"
+    tr ' ' "$nl" < "$tmpdepfile" \
+      | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \
+      | tr "$nl" ' ' >> "$depfile"
     echo >> "$depfile"
-
     # The second pass generates a dummy entry for each header file.
-    tr ' ' '
-' < "$tmpdepfile" \
-   | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
-   >> "$depfile"
+    tr ' ' "$nl" < "$tmpdepfile" \
+      | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+      >> "$depfile"
   else
-    # The sourcefile does not contain any dependencies, so just
-    # store a dummy comment line, to avoid errors with the Makefile
-    # "include basename.Plo" scheme.
-    echo "#dummy" > "$depfile"
+    make_dummy_depfile
   fi
   rm -f "$tmpdepfile"
   ;;
 
+xlc)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
 aix)
   # The C for AIX Compiler uses -M and outputs the dependencies
   # in a .u file.  In older versions, this file always lives in the
-  # current directory.  Also, the AIX compiler puts `$object:' at the
+  # current directory.  Also, the AIX compiler puts '$object:' at the
   # start of each line; $object doesn't have directory information.
   # Version 6 uses the directory in both cases.
-  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-  test "x$dir" = "x$object" && dir=
-  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+  set_dir_from "$object"
+  set_base_from "$object"
   if test "$libtool" = yes; then
     tmpdepfile1=$dir$base.u
     tmpdepfile2=$base.u
@@ -247,9 +313,7 @@
     "$@" -M
   fi
   stat=$?
-
-  if test $stat -eq 0; then :
-  else
+  if test $stat -ne 0; then
     rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
     exit $stat
   fi
@@ -258,44 +322,100 @@
   do
     test -f "$tmpdepfile" && break
   done
-  if test -f "$tmpdepfile"; then
-    # Each line is of the form `foo.o: dependent.h'.
-    # Do two passes, one to just change these to
-    # `$object: dependent.h' and one to simply `dependent.h:'.
-    sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
-    # That's a tab and a space in the [].
-    sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
-  else
-    # The sourcefile does not contain any dependencies, so just
-    # store a dummy comment line, to avoid errors with the Makefile
-    # "include basename.Plo" scheme.
-    echo "#dummy" > "$depfile"
+  aix_post_process_depfile
+  ;;
+
+tcc)
+  # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26
+  # FIXME: That version still under development at the moment of writing.
+  #        Make that this statement remains true also for stable, released
+  #        versions.
+  # It will wrap lines (doesn't matter whether long or short) with a
+  # trailing '\', as in:
+  #
+  #   foo.o : \
+  #    foo.c \
+  #    foo.h \
+  #
+  # It will put a trailing '\' even on the last line, and will use leading
+  # spaces rather than leading tabs (at least since its commit 0394caf7
+  # "Emit spaces for -MD").
+  "$@" -MD -MF "$tmpdepfile"
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
   fi
+  rm -f "$depfile"
+  # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'.
+  # We have to change lines of the first kind to '$object: \'.
+  sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile"
+  # And for each line of the second kind, we have to emit a 'dep.h:'
+  # dummy dependency, to avoid the deleted-header problem.
+  sed -n -e 's|^  *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile"
   rm -f "$tmpdepfile"
   ;;
 
-icc)
-  # Intel's C compiler understands `-MD -MF file'.  However on
-  #    icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
-  # ICC 7.0 will fill foo.d with something like
-  #    foo.o: sub/foo.c
-  #    foo.o: sub/foo.h
-  # which is wrong.  We want:
-  #    sub/foo.o: sub/foo.c
-  #    sub/foo.o: sub/foo.h
-  #    sub/foo.c:
-  #    sub/foo.h:
-  # ICC 7.1 will output
+## The order of this option in the case statement is important, since the
+## shell code in configure will try each of these formats in the order
+## listed in this file.  A plain '-MD' option would be understood by many
+## compilers, so we must ensure this comes after the gcc and icc options.
+pgcc)
+  # Portland's C compiler understands '-MD'.
+  # Will always output deps to 'file.d' where file is the root name of the
+  # source file under compilation, even if file resides in a subdirectory.
+  # The object file name does not affect the name of the '.d' file.
+  # pgcc 10.2 will output
   #    foo.o: sub/foo.c sub/foo.h
-  # and will wrap long lines using \ :
+  # and will wrap long lines using '\' :
   #    foo.o: sub/foo.c ... \
   #     sub/foo.h ... \
   #     ...
+  set_dir_from "$object"
+  # Use the source, not the object, to determine the base name, since
+  # that's sadly what pgcc will do too.
+  set_base_from "$source"
+  tmpdepfile=$base.d
 
-  "$@" -MD -MF "$tmpdepfile"
-  stat=$?
-  if test $stat -eq 0; then :
-  else
+  # For projects that build the same source file twice into different object
+  # files, the pgcc approach of using the *source* file root name can cause
+  # problems in parallel builds.  Use a locking strategy to avoid stomping on
+  # the same $tmpdepfile.
+  lockdir=$base.d-lock
+  trap "
+    echo '$0: caught signal, cleaning up...' >&2
+    rmdir '$lockdir'
+    exit 1
+  " 1 2 13 15
+  numtries=100
+  i=$numtries
+  while test $i -gt 0; do
+    # mkdir is a portable test-and-set.
+    if mkdir "$lockdir" 2>/dev/null; then
+      # This process acquired the lock.
+      "$@" -MD
+      stat=$?
+      # Release the lock.
+      rmdir "$lockdir"
+      break
+    else
+      # If the lock is being held by a different process, wait
+      # until the winning process is done or we timeout.
+      while test -d "$lockdir" && test $i -gt 0; do
+        sleep 1
+        i=`expr $i - 1`
+      done
+    fi
+    i=`expr $i - 1`
+  done
+  trap - 1 2 13 15
+  if test $i -le 0; then
+    echo "$0: failed to acquire lock after $numtries attempts" >&2
+    echo "$0: check lockdir '$lockdir'" >&2
+    exit 1
+  fi
+
+  if test $stat -ne 0; then
     rm -f "$tmpdepfile"
     exit $stat
   fi
@@ -307,8 +427,8 @@
   sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
   # Some versions of the HPUX 10.20 sed can't process this invocation
   # correctly.  Breaking it into two sed invocations is a workaround.
-  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
-    sed -e 's/$/ :/' >> "$depfile"
+  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \
+    | sed -e 's/$/ :/' >> "$depfile"
   rm -f "$tmpdepfile"
   ;;
 
@@ -319,9 +439,8 @@
   # 'foo.d', which lands next to the object file, wherever that
   # happens to be.
   # Much of this is similar to the tru64 case; see comments there.
-  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-  test "x$dir" = "x$object" && dir=
-  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+  set_dir_from  "$object"
+  set_base_from "$object"
   if test "$libtool" = yes; then
     tmpdepfile1=$dir$base.d
     tmpdepfile2=$dir.libs/$base.d
@@ -332,8 +451,7 @@
     "$@" +Maked
   fi
   stat=$?
-  if test $stat -eq 0; then :
-  else
+  if test $stat -ne 0; then
      rm -f "$tmpdepfile1" "$tmpdepfile2"
      exit $stat
   fi
@@ -343,77 +461,61 @@
     test -f "$tmpdepfile" && break
   done
   if test -f "$tmpdepfile"; then
-    sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
-    # Add `dependent.h:' lines.
+    sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile"
+    # Add 'dependent.h:' lines.
     sed -ne '2,${
-	       s/^ *//
-	       s/ \\*$//
-	       s/$/:/
-	       p
-	     }' "$tmpdepfile" >> "$depfile"
+               s/^ *//
+               s/ \\*$//
+               s/$/:/
+               p
+             }' "$tmpdepfile" >> "$depfile"
   else
-    echo "#dummy" > "$depfile"
+    make_dummy_depfile
   fi
   rm -f "$tmpdepfile" "$tmpdepfile2"
   ;;
 
 tru64)
-   # The Tru64 compiler uses -MD to generate dependencies as a side
-   # effect.  `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
-   # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
-   # dependencies in `foo.d' instead, so we check for that too.
-   # Subdirectories are respected.
-   dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-   test "x$dir" = "x$object" && dir=
-   base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+  # The Tru64 compiler uses -MD to generate dependencies as a side
+  # effect.  'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
+  # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+  # dependencies in 'foo.d' instead, so we check for that too.
+  # Subdirectories are respected.
+  set_dir_from  "$object"
+  set_base_from "$object"
 
-   if test "$libtool" = yes; then
-      # With Tru64 cc, shared objects can also be used to make a
-      # static library.  This mechanism is used in libtool 1.4 series to
-      # handle both shared and static libraries in a single compilation.
-      # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
-      #
-      # With libtool 1.5 this exception was removed, and libtool now
-      # generates 2 separate objects for the 2 libraries.  These two
-      # compilations output dependencies in $dir.libs/$base.o.d and
-      # in $dir$base.o.d.  We have to check for both files, because
-      # one of the two compilations can be disabled.  We should prefer
-      # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
-      # automatically cleaned when .libs/ is deleted, while ignoring
-      # the former would cause a distcleancheck panic.
-      tmpdepfile1=$dir.libs/$base.lo.d   # libtool 1.4
-      tmpdepfile2=$dir$base.o.d          # libtool 1.5
-      tmpdepfile3=$dir.libs/$base.o.d    # libtool 1.5
-      tmpdepfile4=$dir.libs/$base.d      # Compaq CCC V6.2-504
-      "$@" -Wc,-MD
-   else
-      tmpdepfile1=$dir$base.o.d
-      tmpdepfile2=$dir$base.d
-      tmpdepfile3=$dir$base.d
-      tmpdepfile4=$dir$base.d
-      "$@" -MD
-   fi
+  if test "$libtool" = yes; then
+    # Libtool generates 2 separate objects for the 2 libraries.  These
+    # two compilations output dependencies in $dir.libs/$base.o.d and
+    # in $dir$base.o.d.  We have to check for both files, because
+    # one of the two compilations can be disabled.  We should prefer
+    # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+    # automatically cleaned when .libs/ is deleted, while ignoring
+    # the former would cause a distcleancheck panic.
+    tmpdepfile1=$dir$base.o.d          # libtool 1.5
+    tmpdepfile2=$dir.libs/$base.o.d    # Likewise.
+    tmpdepfile3=$dir.libs/$base.d      # Compaq CCC V6.2-504
+    "$@" -Wc,-MD
+  else
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir$base.d
+    tmpdepfile3=$dir$base.d
+    "$@" -MD
+  fi
 
-   stat=$?
-   if test $stat -eq 0; then :
-   else
-      rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
-      exit $stat
-   fi
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+    exit $stat
+  fi
 
-   for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
-   do
-     test -f "$tmpdepfile" && break
-   done
-   if test -f "$tmpdepfile"; then
-      sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
-      # That's a tab and a space in the [].
-      sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
-   else
-      echo "#dummy" > "$depfile"
-   fi
-   rm -f "$tmpdepfile"
-   ;;
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+  do
+    test -f "$tmpdepfile" && break
+  done
+  # Same post-processing that is required for AIX mode.
+  aix_post_process_depfile
+  ;;
 
 msvc7)
   if test "$libtool" = yes; then
@@ -424,8 +526,7 @@
   "$@" $showIncludes > "$tmpdepfile"
   stat=$?
   grep -v '^Note: including file: ' "$tmpdepfile"
-  if test "$stat" = 0; then :
-  else
+  if test $stat -ne 0; then
     rm -f "$tmpdepfile"
     exit $stat
   fi
@@ -443,11 +544,11 @@
   p
 }' | $cygpath_u | sort -u | sed -n '
 s/ /\\ /g
-s/\(.*\)/	\1 \\/p
+s/\(.*\)/'"$tab"'\1 \\/p
 s/.\(.*\) \\/\1:/
 H
 $ {
-  s/.*/	/
+  s/.*/'"$tab"'/
   G
   p
 }' >> "$depfile"
@@ -478,7 +579,7 @@
     shift
   fi
 
-  # Remove `-o $object'.
+  # Remove '-o $object'.
   IFS=" "
   for arg
   do
@@ -498,18 +599,18 @@
   done
 
   test -z "$dashmflag" && dashmflag=-M
-  # Require at least two characters before searching for `:'
+  # Require at least two characters before searching for ':'
   # in the target name.  This is to cope with DOS-style filenames:
-  # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
+  # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise.
   "$@" $dashmflag |
-    sed 's:^[  ]*[^: ][^:][^:]*\:[    ]*:'"$object"'\: :' > "$tmpdepfile"
+    sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile"
   rm -f "$depfile"
   cat < "$tmpdepfile" > "$depfile"
-  tr ' ' '
-' < "$tmpdepfile" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process this sed invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  tr ' ' "$nl" < "$tmpdepfile" \
+    | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
+    | sed -e 's/$/ :/' >> "$depfile"
   rm -f "$tmpdepfile"
   ;;
 
@@ -562,11 +663,12 @@
   # makedepend may prepend the VPATH from the source file name to the object.
   # No need to regex-escape $object, excess matching of '.' is harmless.
   sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
-  sed '1,2d' "$tmpdepfile" | tr ' ' '
-' | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process the last invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  sed '1,2d' "$tmpdepfile" \
+    | tr ' ' "$nl" \
+    | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
+    | sed -e 's/$/ :/' >> "$depfile"
   rm -f "$tmpdepfile" "$tmpdepfile".bak
   ;;
 
@@ -583,7 +685,7 @@
     shift
   fi
 
-  # Remove `-o $object'.
+  # Remove '-o $object'.
   IFS=" "
   for arg
   do
@@ -602,10 +704,10 @@
     esac
   done
 
-  "$@" -E |
-    sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
-       -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
-    sed '$ s: \\$::' > "$tmpdepfile"
+  "$@" -E \
+    | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+             -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+    | sed '$ s: \\$::' > "$tmpdepfile"
   rm -f "$depfile"
   echo "$object : \\" > "$depfile"
   cat < "$tmpdepfile" >> "$depfile"
@@ -637,23 +739,23 @@
       shift
       ;;
     "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
-	set fnord "$@"
-	shift
-	shift
-	;;
+        set fnord "$@"
+        shift
+        shift
+        ;;
     *)
-	set fnord "$@" "$arg"
-	shift
-	shift
-	;;
+        set fnord "$@" "$arg"
+        shift
+        shift
+        ;;
     esac
   done
   "$@" -E 2>/dev/null |
   sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
   rm -f "$depfile"
   echo "$object : \\" > "$depfile"
-  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
-  echo "	" >> "$depfile"
+  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile"
+  echo "$tab" >> "$depfile"
   sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
   rm -f "$tmpdepfile"
   ;;
diff --git a/djpeg.c b/djpeg.c
index bc544dc..be7f269 100644
--- a/djpeg.c
+++ b/djpeg.c
@@ -2,7 +2,7 @@
  * djpeg.c
  *
  * Copyright (C) 1991-1997, Thomas G. Lane.
- * Modified 2009 by Guido Vollbeding.
+ * Modified 2009-2013 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -298,7 +298,7 @@
       cinfo->mem->max_memory_to_use = lval * 1000L;
 
     } else if (keymatch(arg, "nosmooth", 3)) {
-      /* Suppress fancy upsampling */
+      /* Suppress fancy upsampling. */
       cinfo->do_fancy_upsampling = FALSE;
 
     } else if (keymatch(arg, "onepass", 3)) {
@@ -327,7 +327,7 @@
       /* Scale the output image by a fraction M/N. */
       if (++argn >= argc)	/* advance to next argument */
 	usage();
-      if (sscanf(argv[argn], "%d/%d",
+      if (sscanf(argv[argn], "%u/%u",
 		 &cinfo->scale_num, &cinfo->scale_denom) < 1)
 	usage();
 
diff --git a/filelist.txt b/filelist.txt
index 7e05386..86633bc 100644
--- a/filelist.txt
+++ b/filelist.txt
@@ -1,6 +1,6 @@
 IJG JPEG LIBRARY:  FILE LIST
 
-Copyright (C) 1994-2009, Thomas G. Lane, Guido Vollbeding.
+Copyright (C) 1994-2012, Thomas G. Lane, Guido Vollbeding.
 This file is part of the Independent JPEG Group's software.
 For conditions of distribution and use, see the accompanying README file.
 
@@ -197,6 +197,7 @@
 config.sub
 depcomp
 missing
+ar-lib
 install-sh	Install shell script for those Unix systems lacking one.
 Makefile.in	Makefile input for configure.
 Makefile.am	Source file for use with Automake to generate Makefile.in.
@@ -206,8 +207,6 @@
 jconfig.*	Sample jconfig.h for particular systems.
 libjpeg.map	Script to generate shared library with versioned symbols.
 aclocal.m4	M4 macro definitions for use with Autoconf.
-ansi2knr.c	De-ANSIfier for pre-ANSI C compilers (courtesy of
-		L. Peter Deutsch and Aladdin Enterprises).
 
 Test files (see install.txt for test procedure):
 
diff --git a/install-sh b/install-sh
index a9244eb..377bb86 100755
--- a/install-sh
+++ b/install-sh
@@ -1,7 +1,7 @@
 #!/bin/sh
 # install - install a program, script, or datafile
 
-scriptversion=2011-01-19.21; # UTC
+scriptversion=2011-11-20.07; # UTC
 
 # This originates from X11R5 (mit/util/scripts/install.sh), which was
 # later released in X11R6 (xc/config/util/install.sh) with the
@@ -35,7 +35,7 @@
 # FSF changes to this file are in the public domain.
 #
 # Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
+# 'make' implicit rules from creating a file called install from it
 # when there is no Makefile.
 #
 # This script is compatible with the BSD install script, but was written
@@ -156,7 +156,7 @@
     -s) stripcmd=$stripprog;;
 
     -t) dst_arg=$2
-	# Protect names problematic for `test' and other utilities.
+	# Protect names problematic for 'test' and other utilities.
 	case $dst_arg in
 	  -* | [=\(\)!]) dst_arg=./$dst_arg;;
 	esac
@@ -190,7 +190,7 @@
     fi
     shift # arg
     dst_arg=$arg
-    # Protect names problematic for `test' and other utilities.
+    # Protect names problematic for 'test' and other utilities.
     case $dst_arg in
       -* | [=\(\)!]) dst_arg=./$dst_arg;;
     esac
@@ -202,7 +202,7 @@
     echo "$0: no input file specified." >&2
     exit 1
   fi
-  # It's OK to call `install-sh -d' without argument.
+  # It's OK to call 'install-sh -d' without argument.
   # This can happen when creating conditional directories.
   exit 0
 fi
@@ -240,7 +240,7 @@
 
 for src
 do
-  # Protect names problematic for `test' and other utilities.
+  # Protect names problematic for 'test' and other utilities.
   case $src in
     -* | [=\(\)!]) src=./$src;;
   esac
@@ -354,7 +354,7 @@
 	      if test -z "$dir_arg" || {
 		   # Check for POSIX incompatibilities with -m.
 		   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
-		   # other-writeable bit of parent directory when it shouldn't.
+		   # other-writable bit of parent directory when it shouldn't.
 		   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
 		   ls_ld_tmpdir=`ls -ld "$tmpdir"`
 		   case $ls_ld_tmpdir in
diff --git a/install.txt b/install.txt
index 04bed91..7ca92cb 100644
--- a/install.txt
+++ b/install.txt
@@ -1,6 +1,6 @@
 INSTALLATION INSTRUCTIONS for the Independent JPEG Group's JPEG software
 
-Copyright (C) 1991-2011, Thomas G. Lane, Guido Vollbeding.
+Copyright (C) 1991-2012, Thomas G. Lane, Guido Vollbeding.
 This file is part of the Independent JPEG Group's software.
 For conditions of distribution and use, see the accompanying README file.
 
@@ -848,14 +848,14 @@
 Microsoft Windows (all versions), generic comments:
 
 Some Windows system include files define typedef boolean as "unsigned char".
-The IJG code also defines typedef boolean, but we make it "int" by default.
+The IJG code also defines typedef boolean, but we make it an "enum" by default.
 This doesn't affect the IJG programs because we don't import those Windows
 include files.  But if you use the JPEG library in your own program, and some
 of your program's files import one definition of boolean while some import the
 other, you can get all sorts of mysterious problems.  A good preventive step
 is to make the IJG library use "unsigned char" for boolean.  To do that,
 add something like this to your jconfig.h file:
-	/* Define "boolean" as unsigned char, not int, per Windows custom */
+	/* Define "boolean" as unsigned char, not enum, per Windows custom */
 	#ifndef __RPCNDR_H__	/* don't conflict if rpcndr.h already read */
 	typedef unsigned char boolean;
 	#endif
diff --git a/jcarith.c b/jcarith.c
index 033f670..a7f9ff7 100644
--- a/jcarith.c
+++ b/jcarith.c
@@ -1,7 +1,7 @@
 /*
  * jcarith.c
  *
- * Developed 1997-2011 by Guido Vollbeding.
+ * Developed 1997-2012 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -479,7 +479,8 @@
   /* Sections F.1.4.2 & F.1.4.4.2: Encoding of AC coefficients */
 
   /* Establish EOB (end-of-block) index */
-  for (ke = cinfo->Se; ke > 0; ke--)
+  ke = cinfo->Se;
+  do {
     /* We must apply the point transform by Al.  For AC coefficients this
      * is an integer division with rounding towards 0.  To do this portably
      * in C, we shift after obtaining the absolute value.
@@ -490,13 +491,14 @@
       v = -v;
       if (v >>= cinfo->Al) break;
     }
+  } while (--ke);
 
   /* Figure F.5: Encode_AC_Coefficients */
-  for (k = cinfo->Ss; k <= ke; k++) {
-    st = entropy->ac_stats[tbl] + 3 * (k - 1);
+  for (k = cinfo->Ss - 1; k < ke;) {
+    st = entropy->ac_stats[tbl] + 3 * k;
     arith_encode(cinfo, st, 0);		/* EOB decision */
     for (;;) {
-      if ((v = (*block)[natural_order[k]]) >= 0) {
+      if ((v = (*block)[natural_order[++k]]) >= 0) {
 	if (v >>= cinfo->Al) {
 	  arith_encode(cinfo, st + 1, 1);
 	  arith_encode(cinfo, entropy->fixed_bin, 0);
@@ -510,7 +512,8 @@
 	  break;
 	}
       }
-      arith_encode(cinfo, st + 1, 0); st += 3; k++;
+      arith_encode(cinfo, st + 1, 0);
+      st += 3;
     }
     st += 2;
     /* Figure F.8: Encoding the magnitude category of v */
@@ -537,9 +540,9 @@
     while (m >>= 1)
       arith_encode(cinfo, st, (m & v) ? 1 : 0);
   }
-  /* Encode EOB decision only if k <= cinfo->Se */
-  if (k <= cinfo->Se) {
-    st = entropy->ac_stats[tbl] + 3 * (k - 1);
+  /* Encode EOB decision only if k < cinfo->Se */
+  if (k < cinfo->Se) {
+    st = entropy->ac_stats[tbl] + 3 * k;
     arith_encode(cinfo, st, 1);
   }
 
@@ -616,7 +619,8 @@
   /* Section G.1.3.3: Encoding of AC coefficients */
 
   /* Establish EOB (end-of-block) index */
-  for (ke = cinfo->Se; ke > 0; ke--)
+  ke = cinfo->Se;
+  do {
     /* We must apply the point transform by Al.  For AC coefficients this
      * is an integer division with rounding towards 0.  To do this portably
      * in C, we shift after obtaining the absolute value.
@@ -627,6 +631,7 @@
       v = -v;
       if (v >>= cinfo->Al) break;
     }
+  } while (--ke);
 
   /* Establish EOBx (previous stage end-of-block) index */
   for (kex = ke; kex > 0; kex--)
@@ -638,12 +643,12 @@
     }
 
   /* Figure G.10: Encode_AC_Coefficients_SA */
-  for (k = cinfo->Ss; k <= ke; k++) {
-    st = entropy->ac_stats[tbl] + 3 * (k - 1);
-    if (k > kex)
+  for (k = cinfo->Ss - 1; k < ke;) {
+    st = entropy->ac_stats[tbl] + 3 * k;
+    if (k >= kex)
       arith_encode(cinfo, st, 0);	/* EOB decision */
     for (;;) {
-      if ((v = (*block)[natural_order[k]]) >= 0) {
+      if ((v = (*block)[natural_order[++k]]) >= 0) {
 	if (v >>= cinfo->Al) {
 	  if (v >> 1)			/* previously nonzero coef */
 	    arith_encode(cinfo, st + 2, (v & 1));
@@ -665,12 +670,13 @@
 	  break;
 	}
       }
-      arith_encode(cinfo, st + 1, 0); st += 3; k++;
+      arith_encode(cinfo, st + 1, 0);
+      st += 3;
     }
   }
-  /* Encode EOB decision only if k <= cinfo->Se */
-  if (k <= cinfo->Se) {
-    st = entropy->ac_stats[tbl] + 3 * (k - 1);
+  /* Encode EOB decision only if k < cinfo->Se */
+  if (k < cinfo->Se) {
+    st = entropy->ac_stats[tbl] + 3 * k;
     arith_encode(cinfo, st, 1);
   }
 
@@ -922,7 +928,7 @@
   entropy = (arith_entropy_ptr)
     (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
 				SIZEOF(arith_entropy_encoder));
-  cinfo->entropy = (struct jpeg_entropy_encoder *) entropy;
+  cinfo->entropy = &entropy->pub;
   entropy->pub.start_pass = start_pass;
   entropy->pub.finish_pass = finish_pass;
 
diff --git a/jccolor.c b/jccolor.c
index 3e2d0e9..81d74ef 100644
--- a/jccolor.c
+++ b/jccolor.c
@@ -2,7 +2,7 @@
  * jccolor.c
  *
  * Copyright (C) 1991-1996, Thomas G. Lane.
- * Modified 2011 by Guido Vollbeding.
+ * Modified 2011-2012 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -133,8 +133,8 @@
 		 JDIMENSION output_row, int num_rows)
 {
   my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
-  register int r, g, b;
   register INT32 * ctab = cconvert->rgb_ycc_tab;
+  register int r, g, b;
   register JSAMPROW inptr;
   register JSAMPROW outptr0, outptr1, outptr2;
   register JDIMENSION col;
@@ -150,7 +150,6 @@
       r = GETJSAMPLE(inptr[RGB_RED]);
       g = GETJSAMPLE(inptr[RGB_GREEN]);
       b = GETJSAMPLE(inptr[RGB_BLUE]);
-      inptr += RGB_PIXELSIZE;
       /* If the inputs are 0..MAXJSAMPLE, the outputs of these equations
        * must be too; we do not need an explicit range-limiting operation.
        * Hence the value being shifted is never negative, and we don't
@@ -168,6 +167,7 @@
       outptr2[col] = (JSAMPLE)
 		((ctab[r+R_CR_OFF] + ctab[g+G_CR_OFF] + ctab[b+B_CR_OFF])
 		 >> SCALEBITS);
+      inptr += RGB_PIXELSIZE;
     }
   }
 }
@@ -189,8 +189,8 @@
 		  JDIMENSION output_row, int num_rows)
 {
   my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
-  register int r, g, b;
   register INT32 * ctab = cconvert->rgb_ycc_tab;
+  register int r, g, b;
   register JSAMPROW inptr;
   register JSAMPROW outptr;
   register JDIMENSION col;
@@ -198,17 +198,16 @@
 
   while (--num_rows >= 0) {
     inptr = *input_buf++;
-    outptr = output_buf[0][output_row];
-    output_row++;
+    outptr = output_buf[0][output_row++];
     for (col = 0; col < num_cols; col++) {
       r = GETJSAMPLE(inptr[RGB_RED]);
       g = GETJSAMPLE(inptr[RGB_GREEN]);
       b = GETJSAMPLE(inptr[RGB_BLUE]);
-      inptr += RGB_PIXELSIZE;
       /* Y */
       outptr[col] = (JSAMPLE)
 		((ctab[r+R_Y_OFF] + ctab[g+G_Y_OFF] + ctab[b+B_Y_OFF])
 		 >> SCALEBITS);
+      inptr += RGB_PIXELSIZE;
     }
   }
 }
@@ -228,8 +227,8 @@
 		   JDIMENSION output_row, int num_rows)
 {
   my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
-  register int r, g, b;
   register INT32 * ctab = cconvert->rgb_ycc_tab;
+  register int r, g, b;
   register JSAMPROW inptr;
   register JSAMPROW outptr0, outptr1, outptr2, outptr3;
   register JDIMENSION col;
@@ -248,7 +247,6 @@
       b = MAXJSAMPLE - GETJSAMPLE(inptr[2]);
       /* K passes through as-is */
       outptr3[col] = inptr[3];	/* don't need GETJSAMPLE here */
-      inptr += 4;
       /* If the inputs are 0..MAXJSAMPLE, the outputs of these equations
        * must be too; we do not need an explicit range-limiting operation.
        * Hence the value being shifted is never negative, and we don't
@@ -266,6 +264,46 @@
       outptr2[col] = (JSAMPLE)
 		((ctab[r+R_CR_OFF] + ctab[g+G_CR_OFF] + ctab[b+B_CR_OFF])
 		 >> SCALEBITS);
+      inptr += 4;
+    }
+  }
+}
+
+
+/*
+ * Convert some rows of samples to the JPEG colorspace.
+ * [R,G,B] to [R-G,G,B-G] conversion with modulo calculation
+ * (forward reversible color transform).
+ */
+
+METHODDEF(void)
+rgb_rgb1_convert (j_compress_ptr cinfo,
+		  JSAMPARRAY input_buf, JSAMPIMAGE output_buf,
+		  JDIMENSION output_row, int num_rows)
+{
+  register int r, g, b;
+  register JSAMPROW inptr;
+  register JSAMPROW outptr0, outptr1, outptr2;
+  register JDIMENSION col;
+  JDIMENSION num_cols = cinfo->image_width;
+
+  while (--num_rows >= 0) {
+    inptr = *input_buf++;
+    outptr0 = output_buf[0][output_row];
+    outptr1 = output_buf[1][output_row];
+    outptr2 = output_buf[2][output_row];
+    output_row++;
+    for (col = 0; col < num_cols; col++) {
+      r = GETJSAMPLE(inptr[RGB_RED]);
+      g = GETJSAMPLE(inptr[RGB_GREEN]);
+      b = GETJSAMPLE(inptr[RGB_BLUE]);
+      /* Assume that MAXJSAMPLE+1 is a power of 2, so that the MOD
+       * (modulo) operator is equivalent to the bitmask operator AND.
+       */
+      outptr0[col] = (JSAMPLE) ((r - g + CENTERJSAMPLE) & MAXJSAMPLE);
+      outptr1[col] = (JSAMPLE) g;
+      outptr2[col] = (JSAMPLE) ((b - g + CENTERJSAMPLE) & MAXJSAMPLE);
+      inptr += RGB_PIXELSIZE;
     }
   }
 }
@@ -282,16 +320,15 @@
 		   JSAMPARRAY input_buf, JSAMPIMAGE output_buf,
 		   JDIMENSION output_row, int num_rows)
 {
+  int instride = cinfo->input_components;
   register JSAMPROW inptr;
   register JSAMPROW outptr;
   register JDIMENSION col;
   JDIMENSION num_cols = cinfo->image_width;
-  int instride = cinfo->input_components;
 
   while (--num_rows >= 0) {
     inptr = *input_buf++;
-    outptr = output_buf[0][output_row];
-    output_row++;
+    outptr = output_buf[0][output_row++];
     for (col = 0; col < num_cols; col++) {
       outptr[col] = inptr[0];	/* don't need GETJSAMPLE() here */
       inptr += instride;
@@ -344,20 +381,20 @@
 	      JSAMPARRAY input_buf, JSAMPIMAGE output_buf,
 	      JDIMENSION output_row, int num_rows)
 {
+  int ci;
+  register int nc = cinfo->num_components;
   register JSAMPROW inptr;
   register JSAMPROW outptr;
   register JDIMENSION col;
-  register int ci;
-  int nc = cinfo->num_components;
   JDIMENSION num_cols = cinfo->image_width;
 
   while (--num_rows >= 0) {
     /* It seems fastest to make a separate pass for each component. */
     for (ci = 0; ci < nc; ci++) {
-      inptr = *input_buf;
+      inptr = input_buf[0] + ci;
       outptr = output_buf[ci][output_row];
       for (col = 0; col < num_cols; col++) {
-	outptr[col] = inptr[ci]; /* don't need GETJSAMPLE() here */
+	*outptr++ = *inptr;	/* don't need GETJSAMPLE() here */
 	inptr += nc;
       }
     }
@@ -390,7 +427,7 @@
   cconvert = (my_cconvert_ptr)
     (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
 				SIZEOF(my_color_converter));
-  cinfo->cconvert = (struct jpeg_color_converter *) cconvert;
+  cinfo->cconvert = &cconvert->pub;
   /* set start_pass to null method until we find out differently */
   cconvert->pub.start_pass = null_method;
 
@@ -423,6 +460,10 @@
     break;
   }
 
+  /* Support color transform only for RGB colorspace */
+  if (cinfo->color_transform && cinfo->jpeg_color_space != JCS_RGB)
+    ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
+
   /* Check num_components, set conversion method based on requested space */
   switch (cinfo->jpeg_color_space) {
   case JCS_GRAYSCALE:
@@ -441,9 +482,19 @@
   case JCS_RGB:
     if (cinfo->num_components != 3)
       ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
-    if (cinfo->in_color_space == JCS_RGB)
-      cconvert->pub.color_convert = rgb_convert;
-    else
+    if (cinfo->in_color_space == JCS_RGB) {
+      switch (cinfo->color_transform) {
+      case JCT_NONE:
+	cconvert->pub.color_convert = rgb_convert;
+	break;
+      case JCT_SUBTRACT_GREEN:
+	cconvert->pub.color_convert = rgb_rgb1_convert;
+	break;
+      default:
+	ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
+	break;
+      }
+    } else
       ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
     break;
 
diff --git a/jcmainct.c b/jcmainct.c
index 7de75d1..39b9790 100644
--- a/jcmainct.c
+++ b/jcmainct.c
@@ -2,6 +2,7 @@
  * jcmainct.c
  *
  * Copyright (C) 1994-1996, Thomas G. Lane.
+ * Modified 2003-2012 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -68,32 +69,32 @@
 METHODDEF(void)
 start_pass_main (j_compress_ptr cinfo, J_BUF_MODE pass_mode)
 {
-  my_main_ptr main = (my_main_ptr) cinfo->main;
+  my_main_ptr mainp = (my_main_ptr) cinfo->main;
 
   /* Do nothing in raw-data mode. */
   if (cinfo->raw_data_in)
     return;
 
-  main->cur_iMCU_row = 0;	/* initialize counters */
-  main->rowgroup_ctr = 0;
-  main->suspended = FALSE;
-  main->pass_mode = pass_mode;	/* save mode for use by process_data */
+  mainp->cur_iMCU_row = 0;	/* initialize counters */
+  mainp->rowgroup_ctr = 0;
+  mainp->suspended = FALSE;
+  mainp->pass_mode = pass_mode;	/* save mode for use by process_data */
 
   switch (pass_mode) {
   case JBUF_PASS_THRU:
 #ifdef FULL_MAIN_BUFFER_SUPPORTED
-    if (main->whole_image[0] != NULL)
+    if (mainp->whole_image[0] != NULL)
       ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
 #endif
-    main->pub.process_data = process_data_simple_main;
+    mainp->pub.process_data = process_data_simple_main;
     break;
 #ifdef FULL_MAIN_BUFFER_SUPPORTED
   case JBUF_SAVE_SOURCE:
   case JBUF_CRANK_DEST:
   case JBUF_SAVE_AND_PASS:
-    if (main->whole_image[0] == NULL)
+    if (mainp->whole_image[0] == NULL)
       ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
-    main->pub.process_data = process_data_buffer_main;
+    mainp->pub.process_data = process_data_buffer_main;
     break;
 #endif
   default:
@@ -114,46 +115,46 @@
 			  JSAMPARRAY input_buf, JDIMENSION *in_row_ctr,
 			  JDIMENSION in_rows_avail)
 {
-  my_main_ptr main = (my_main_ptr) cinfo->main;
+  my_main_ptr mainp = (my_main_ptr) cinfo->main;
 
-  while (main->cur_iMCU_row < cinfo->total_iMCU_rows) {
+  while (mainp->cur_iMCU_row < cinfo->total_iMCU_rows) {
     /* Read input data if we haven't filled the main buffer yet */
-    if (main->rowgroup_ctr < (JDIMENSION) cinfo->min_DCT_v_scaled_size)
+    if (mainp->rowgroup_ctr < (JDIMENSION) cinfo->min_DCT_v_scaled_size)
       (*cinfo->prep->pre_process_data) (cinfo,
 					input_buf, in_row_ctr, in_rows_avail,
-					main->buffer, &main->rowgroup_ctr,
+					mainp->buffer, &mainp->rowgroup_ctr,
 					(JDIMENSION) cinfo->min_DCT_v_scaled_size);
 
     /* If we don't have a full iMCU row buffered, return to application for
      * more data.  Note that preprocessor will always pad to fill the iMCU row
      * at the bottom of the image.
      */
-    if (main->rowgroup_ctr != (JDIMENSION) cinfo->min_DCT_v_scaled_size)
+    if (mainp->rowgroup_ctr != (JDIMENSION) cinfo->min_DCT_v_scaled_size)
       return;
 
     /* Send the completed row to the compressor */
-    if (! (*cinfo->coef->compress_data) (cinfo, main->buffer)) {
+    if (! (*cinfo->coef->compress_data) (cinfo, mainp->buffer)) {
       /* If compressor did not consume the whole row, then we must need to
        * suspend processing and return to the application.  In this situation
        * we pretend we didn't yet consume the last input row; otherwise, if
        * it happened to be the last row of the image, the application would
        * think we were done.
        */
-      if (! main->suspended) {
+      if (! mainp->suspended) {
 	(*in_row_ctr)--;
-	main->suspended = TRUE;
+	mainp->suspended = TRUE;
       }
       return;
     }
     /* We did finish the row.  Undo our little suspension hack if a previous
      * call suspended; then mark the main buffer empty.
      */
-    if (main->suspended) {
+    if (mainp->suspended) {
       (*in_row_ctr)++;
-      main->suspended = FALSE;
+      mainp->suspended = FALSE;
     }
-    main->rowgroup_ctr = 0;
-    main->cur_iMCU_row++;
+    mainp->rowgroup_ctr = 0;
+    mainp->cur_iMCU_row++;
   }
 }
 
@@ -170,25 +171,27 @@
 			  JSAMPARRAY input_buf, JDIMENSION *in_row_ctr,
 			  JDIMENSION in_rows_avail)
 {
-  my_main_ptr main = (my_main_ptr) cinfo->main;
+  my_main_ptr mainp = (my_main_ptr) cinfo->main;
   int ci;
   jpeg_component_info *compptr;
-  boolean writing = (main->pass_mode != JBUF_CRANK_DEST);
+  boolean writing = (mainp->pass_mode != JBUF_CRANK_DEST);
 
-  while (main->cur_iMCU_row < cinfo->total_iMCU_rows) {
+  while (mainp->cur_iMCU_row < cinfo->total_iMCU_rows) {
     /* Realign the virtual buffers if at the start of an iMCU row. */
-    if (main->rowgroup_ctr == 0) {
+    if (mainp->rowgroup_ctr == 0) {
       for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
 	   ci++, compptr++) {
-	main->buffer[ci] = (*cinfo->mem->access_virt_sarray)
-	  ((j_common_ptr) cinfo, main->whole_image[ci],
-	   main->cur_iMCU_row * (compptr->v_samp_factor * DCTSIZE),
-	   (JDIMENSION) (compptr->v_samp_factor * DCTSIZE), writing);
+	mainp->buffer[ci] = (*cinfo->mem->access_virt_sarray)
+	  ((j_common_ptr) cinfo, mainp->whole_image[ci], mainp->cur_iMCU_row *
+	   ((JDIMENSION) (compptr->v_samp_factor * cinfo->min_DCT_v_scaled_size)),
+	   (JDIMENSION) (compptr->v_samp_factor * cinfo->min_DCT_v_scaled_size),
+	   writing);
       }
       /* In a read pass, pretend we just read some source data. */
       if (! writing) {
-	*in_row_ctr += cinfo->max_v_samp_factor * DCTSIZE;
-	main->rowgroup_ctr = DCTSIZE;
+	*in_row_ctr += (JDIMENSION)
+	  (cinfo->max_v_samp_factor * cinfo->min_DCT_v_scaled_size);
+	mainp->rowgroup_ctr = (JDIMENSION) cinfo->min_DCT_v_scaled_size;
       }
     }
 
@@ -197,40 +200,40 @@
     if (writing) {
       (*cinfo->prep->pre_process_data) (cinfo,
 					input_buf, in_row_ctr, in_rows_avail,
-					main->buffer, &main->rowgroup_ctr,
-					(JDIMENSION) DCTSIZE);
+					mainp->buffer, &mainp->rowgroup_ctr,
+					(JDIMENSION) cinfo->min_DCT_v_scaled_size);
       /* Return to application if we need more data to fill the iMCU row. */
-      if (main->rowgroup_ctr < DCTSIZE)
+      if (mainp->rowgroup_ctr < (JDIMENSION) cinfo->min_DCT_v_scaled_size)
 	return;
     }
 
     /* Emit data, unless this is a sink-only pass. */
-    if (main->pass_mode != JBUF_SAVE_SOURCE) {
-      if (! (*cinfo->coef->compress_data) (cinfo, main->buffer)) {
+    if (mainp->pass_mode != JBUF_SAVE_SOURCE) {
+      if (! (*cinfo->coef->compress_data) (cinfo, mainp->buffer)) {
 	/* If compressor did not consume the whole row, then we must need to
 	 * suspend processing and return to the application.  In this situation
 	 * we pretend we didn't yet consume the last input row; otherwise, if
 	 * it happened to be the last row of the image, the application would
 	 * think we were done.
 	 */
-	if (! main->suspended) {
+	if (! mainp->suspended) {
 	  (*in_row_ctr)--;
-	  main->suspended = TRUE;
+	  mainp->suspended = TRUE;
 	}
 	return;
       }
       /* We did finish the row.  Undo our little suspension hack if a previous
        * call suspended; then mark the main buffer empty.
        */
-      if (main->suspended) {
+      if (mainp->suspended) {
 	(*in_row_ctr)++;
-	main->suspended = FALSE;
+	mainp->suspended = FALSE;
       }
     }
 
     /* If get here, we are done with this iMCU row.  Mark buffer empty. */
-    main->rowgroup_ctr = 0;
-    main->cur_iMCU_row++;
+    mainp->rowgroup_ctr = 0;
+    mainp->cur_iMCU_row++;
   }
 }
 
@@ -244,15 +247,15 @@
 GLOBAL(void)
 jinit_c_main_controller (j_compress_ptr cinfo, boolean need_full_buffer)
 {
-  my_main_ptr main;
+  my_main_ptr mainp;
   int ci;
   jpeg_component_info *compptr;
 
-  main = (my_main_ptr)
+  mainp = (my_main_ptr)
     (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
 				SIZEOF(my_main_controller));
-  cinfo->main = (struct jpeg_c_main_controller *) main;
-  main->pub.start_pass = start_pass_main;
+  cinfo->main = &mainp->pub;
+  mainp->pub.start_pass = start_pass_main;
 
   /* We don't need to create a buffer in raw-data mode. */
   if (cinfo->raw_data_in)
@@ -267,11 +270,12 @@
     /* Note we pad the bottom to a multiple of the iMCU height */
     for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
 	 ci++, compptr++) {
-      main->whole_image[ci] = (*cinfo->mem->request_virt_sarray)
+      mainp->whole_image[ci] = (*cinfo->mem->request_virt_sarray)
 	((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE,
-	 compptr->width_in_blocks * compptr->DCT_h_scaled_size,
-	 (JDIMENSION) jround_up((long) compptr->height_in_blocks,
-				(long) compptr->v_samp_factor) * DCTSIZE,
+	 compptr->width_in_blocks * ((JDIMENSION) compptr->DCT_h_scaled_size),
+	 ((JDIMENSION) jround_up((long) compptr->height_in_blocks,
+				 (long) compptr->v_samp_factor)) *
+	 ((JDIMENSION) cinfo->min_DCT_v_scaled_size),
 	 (JDIMENSION) (compptr->v_samp_factor * compptr->DCT_v_scaled_size));
     }
 #else
@@ -279,14 +283,14 @@
 #endif
   } else {
 #ifdef FULL_MAIN_BUFFER_SUPPORTED
-    main->whole_image[0] = NULL; /* flag for no virtual arrays */
+    mainp->whole_image[0] = NULL; /* flag for no virtual arrays */
 #endif
     /* Allocate a strip buffer for each component */
     for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
 	 ci++, compptr++) {
-      main->buffer[ci] = (*cinfo->mem->alloc_sarray)
+      mainp->buffer[ci] = (*cinfo->mem->alloc_sarray)
 	((j_common_ptr) cinfo, JPOOL_IMAGE,
-	 compptr->width_in_blocks * compptr->DCT_h_scaled_size,
+	 compptr->width_in_blocks * ((JDIMENSION) compptr->DCT_h_scaled_size),
 	 (JDIMENSION) (compptr->v_samp_factor * compptr->DCT_v_scaled_size));
     }
   }
diff --git a/jcmarker.c b/jcmarker.c
index 606c19a..92aa65f 100644
--- a/jcmarker.c
+++ b/jcmarker.c
@@ -2,7 +2,7 @@
  * jcmarker.c
  *
  * Copyright (C) 1991-1998, Thomas G. Lane.
- * Modified 2003-2010 by Guido Vollbeding.
+ * Modified 2003-2012 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -19,24 +19,24 @@
   M_SOF1  = 0xc1,
   M_SOF2  = 0xc2,
   M_SOF3  = 0xc3,
-  
+
   M_SOF5  = 0xc5,
   M_SOF6  = 0xc6,
   M_SOF7  = 0xc7,
-  
+
   M_JPG   = 0xc8,
   M_SOF9  = 0xc9,
   M_SOF10 = 0xca,
   M_SOF11 = 0xcb,
-  
+
   M_SOF13 = 0xcd,
   M_SOF14 = 0xce,
   M_SOF15 = 0xcf,
-  
+
   M_DHT   = 0xc4,
-  
+
   M_DAC   = 0xcc,
-  
+
   M_RST0  = 0xd0,
   M_RST1  = 0xd1,
   M_RST2  = 0xd2,
@@ -45,7 +45,7 @@
   M_RST5  = 0xd5,
   M_RST6  = 0xd6,
   M_RST7  = 0xd7,
-  
+
   M_SOI   = 0xd8,
   M_EOI   = 0xd9,
   M_SOS   = 0xda,
@@ -54,7 +54,7 @@
   M_DRI   = 0xdd,
   M_DHP   = 0xde,
   M_EXP   = 0xdf,
-  
+
   M_APP0  = 0xe0,
   M_APP1  = 0xe1,
   M_APP2  = 0xe2,
@@ -71,13 +71,14 @@
   M_APP13 = 0xed,
   M_APP14 = 0xee,
   M_APP15 = 0xef,
-  
+
   M_JPG0  = 0xf0,
+  M_JPG8  = 0xf8,
   M_JPG13 = 0xfd,
   M_COM   = 0xfe,
-  
+
   M_TEM   = 0x01,
-  
+
   M_ERROR = 0x100
 } JPEG_MARKER;
 
@@ -282,6 +283,37 @@
 
 
 LOCAL(void)
+emit_lse_ict (j_compress_ptr cinfo)
+/* Emit an LSE inverse color transform specification marker */
+{
+  /* Support only 1 transform */
+  if (cinfo->color_transform != JCT_SUBTRACT_GREEN ||
+      cinfo->num_components < 3)
+    ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
+
+  emit_marker(cinfo, M_JPG8);
+  
+  emit_2bytes(cinfo, 24);	/* fixed length */
+
+  emit_byte(cinfo, 0x0D);	/* ID inverse transform specification */
+  emit_2bytes(cinfo, MAXJSAMPLE);	/* MAXTRANS */
+  emit_byte(cinfo, 3);		/* Nt=3 */
+  emit_byte(cinfo, cinfo->comp_info[1].component_id);
+  emit_byte(cinfo, cinfo->comp_info[0].component_id);
+  emit_byte(cinfo, cinfo->comp_info[2].component_id);
+  emit_byte(cinfo, 0x80);	/* F1: CENTER1=1, NORM1=0 */
+  emit_2bytes(cinfo, 0);	/* A(1,1)=0 */
+  emit_2bytes(cinfo, 0);	/* A(1,2)=0 */
+  emit_byte(cinfo, 0);		/* F2: CENTER2=0, NORM2=0 */
+  emit_2bytes(cinfo, 1);	/* A(2,1)=1 */
+  emit_2bytes(cinfo, 0);	/* A(2,2)=0 */
+  emit_byte(cinfo, 0);		/* F3: CENTER3=0, NORM3=0 */
+  emit_2bytes(cinfo, 1);	/* A(3,1)=1 */
+  emit_2bytes(cinfo, 0);	/* A(3,2)=0 */
+}
+
+
+LOCAL(void)
 emit_sof (j_compress_ptr cinfo, JPEG_MARKER code)
 /* Emit a SOF marker */
 {
@@ -502,7 +534,8 @@
 
 /*
  * Write frame header.
- * This consists of DQT and SOFn markers, and a conditional pseudo SOS marker.
+ * This consists of DQT and SOFn markers,
+ * a conditional LSE marker and a conditional pseudo SOS marker.
  * Note that we do not emit the SOF until we have emitted the DQT(s).
  * This avoids compatibility problems with incorrect implementations that
  * try to error-check the quant table numbers as soon as they see the SOF.
@@ -560,6 +593,10 @@
       emit_sof(cinfo, M_SOF1);	/* SOF code for non-baseline Huffman file */
   }
 
+  /* Check to emit LSE inverse color transform specification marker */
+  if (cinfo->color_transform)
+    emit_lse_ict(cinfo);
+
   /* Check to emit pseudo SOS marker */
   if (cinfo->progressive_mode && cinfo->block_size != DCTSIZE)
     emit_pseudo_sos(cinfo);
@@ -668,7 +705,7 @@
   marker = (my_marker_ptr)
     (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
 				SIZEOF(my_marker_writer));
-  cinfo->marker = (struct jpeg_marker_writer *) marker;
+  cinfo->marker = &marker->pub;
   /* Initialize method pointers */
   marker->pub.write_file_header = write_file_header;
   marker->pub.write_frame_header = write_frame_header;
diff --git a/jconfig.vc b/jconfig.vc
index 679404d..f15b418 100644
--- a/jconfig.vc
+++ b/jconfig.vc
@@ -15,7 +15,7 @@
 #undef NEED_SHORT_EXTERNAL_NAMES
 #undef INCOMPLETE_TYPES_BROKEN
 
-/* Define "boolean" as unsigned char, not int, per Windows custom */
+/* Define "boolean" as unsigned char, not enum, per Windows custom */
 #ifndef __RPCNDR_H__		/* don't conflict if rpcndr.h already read */
 typedef unsigned char boolean;
 #endif
diff --git a/jcparam.c b/jcparam.c
index c5e85dd..e530c3c 100644
--- a/jcparam.c
+++ b/jcparam.c
@@ -2,7 +2,7 @@
  * jcparam.c
  *
  * Copyright (C) 1991-1998, Thomas G. Lane.
- * Modified 2003-2008 by Guido Vollbeding.
+ * Modified 2003-2012 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -150,7 +150,7 @@
 /* Set or change the 'quality' (quantization) setting, using default tables.
  * This is the standard quality-adjusting entry point for typical user
  * interfaces; only those who want detailed control over quantization tables
- * would use the preceding three routines directly.
+ * would use the preceding routines directly.
  */
 {
   /* Convert user 0-100 rating to percentage scaling */
@@ -367,6 +367,9 @@
   cinfo->X_density = 1;		/* Pixel aspect ratio is square by default */
   cinfo->Y_density = 1;
 
+  /* No color transform */
+  cinfo->color_transform = JCT_NONE;
+
   /* Choose JPEG colorspace based on input space, set defaults accordingly */
 
   jpeg_default_colorspace(cinfo);
@@ -448,7 +451,9 @@
     cinfo->write_Adobe_marker = TRUE; /* write Adobe marker to flag RGB */
     cinfo->num_components = 3;
     SET_COMP(0, 0x52 /* 'R' */, 1,1, 0, 0,0);
-    SET_COMP(1, 0x47 /* 'G' */, 1,1, 0, 0,0);
+    SET_COMP(1, 0x47 /* 'G' */, 1,1, 0,
+		cinfo->color_transform == JCT_SUBTRACT_GREEN ? 1 : 0,
+		cinfo->color_transform == JCT_SUBTRACT_GREEN ? 1 : 0);
     SET_COMP(2, 0x42 /* 'B' */, 1,1, 0, 0,0);
     break;
   case JCS_YCbCr:
diff --git a/jctrans.c b/jctrans.c
index f7d7b81..8813c3e 100644
--- a/jctrans.c
+++ b/jctrans.c
@@ -2,7 +2,7 @@
  * jctrans.c
  *
  * Copyright (C) 1995-1998, Thomas G. Lane.
- * Modified 2000-2011 by Guido Vollbeding.
+ * Modified 2000-2012 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -85,7 +85,10 @@
   jpeg_set_defaults(dstinfo);
   /* jpeg_set_defaults may choose wrong colorspace, eg YCbCr if input is RGB.
    * Fix it to get the right header markers for the image colorspace.
+   * Note: Entropy table assignment in jpeg_set_colorspace depends
+   * on color_transform.
    */
+  dstinfo->color_transform = srcinfo->color_transform;
   jpeg_set_colorspace(dstinfo, srcinfo->jpeg_color_space);
   dstinfo->data_precision = srcinfo->data_precision;
   dstinfo->CCIR601_sampling = srcinfo->CCIR601_sampling;
@@ -130,7 +133,7 @@
 	  ERREXIT1(dstinfo, JERR_MISMATCHED_QUANT_TABLE, tblno);
       }
     }
-    /* Note: we do not copy the source's Huffman table assignments;
+    /* Note: we do not copy the source's entropy table assignments;
      * instead we rely on jpeg_set_colorspace to have made a suitable choice.
      */
   }
@@ -364,7 +367,7 @@
   coef = (my_coef_ptr)
     (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
 				SIZEOF(my_coef_controller));
-  cinfo->coef = (struct jpeg_c_coef_controller *) coef;
+  cinfo->coef = &coef->pub;
   coef->pub.start_pass = start_pass_coef;
   coef->pub.compress_data = compress_output;
 
diff --git a/jdarith.c b/jdarith.c
index 092f8af..6e32d23 100644
--- a/jdarith.c
+++ b/jdarith.c
@@ -1,7 +1,7 @@
 /*
  * jdarith.c
  *
- * Developed 1997-2011 by Guido Vollbeding.
+ * Developed 1997-2012 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -345,12 +345,15 @@
   /* Sections F.2.4.2 & F.1.4.4.2: Decoding of AC coefficients */
 
   /* Figure F.20: Decode_AC_coefficients */
-  for (k = cinfo->Ss; k <= cinfo->Se; k++) {
-    st = entropy->ac_stats[tbl] + 3 * (k - 1);
+  k = cinfo->Ss - 1;
+  do {
+    st = entropy->ac_stats[tbl] + 3 * k;
     if (arith_decode(cinfo, st)) break;		/* EOB flag */
-    while (arith_decode(cinfo, st + 1) == 0) {
-      st += 3; k++;
-      if (k > cinfo->Se) {
+    for (;;) {
+      k++;
+      if (arith_decode(cinfo, st + 1)) break;
+      st += 3;
+      if (k >= cinfo->Se) {
 	WARNMS(cinfo, JWRN_ARITH_BAD_CODE);
 	entropy->ct = -1;			/* spectral overflow */
 	return TRUE;
@@ -384,7 +387,7 @@
     v += 1; if (sign) v = -v;
     /* Scale and output coefficient in natural (dezigzagged) order */
     (*block)[natural_order[k]] = (JCOEF) (v << cinfo->Al);
-  }
+  } while (k < cinfo->Se);
 
   return TRUE;
 }
@@ -457,15 +460,18 @@
   m1 = (-1) << cinfo->Al;	/* -1 in the bit position being coded */
 
   /* Establish EOBx (previous stage end-of-block) index */
-  for (kex = cinfo->Se; kex > 0; kex--)
+  kex = cinfo->Se;
+  do {
     if ((*block)[natural_order[kex]]) break;
+  } while (--kex);
 
-  for (k = cinfo->Ss; k <= cinfo->Se; k++) {
-    st = entropy->ac_stats[tbl] + 3 * (k - 1);
-    if (k > kex)
+  k = cinfo->Ss - 1;
+  do {
+    st = entropy->ac_stats[tbl] + 3 * k;
+    if (k >= kex)
       if (arith_decode(cinfo, st)) break;	/* EOB flag */
     for (;;) {
-      thiscoef = *block + natural_order[k];
+      thiscoef = *block + natural_order[++k];
       if (*thiscoef) {				/* previously nonzero coef */
 	if (arith_decode(cinfo, st + 2)) {
 	  if (*thiscoef < 0)
@@ -482,14 +488,14 @@
 	  *thiscoef = p1;
 	break;
       }
-      st += 3; k++;
-      if (k > cinfo->Se) {
+      st += 3;
+      if (k >= cinfo->Se) {
 	WARNMS(cinfo, JWRN_ARITH_BAD_CODE);
 	entropy->ct = -1;			/* spectral overflow */
 	return TRUE;
       }
     }
-  }
+  } while (k < cinfo->Se);
 
   return TRUE;
 }
@@ -750,7 +756,7 @@
   entropy = (arith_entropy_ptr)
     (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
 				SIZEOF(arith_entropy_decoder));
-  cinfo->entropy = (struct jpeg_entropy_decoder *) entropy;
+  cinfo->entropy = &entropy->pub;
   entropy->pub.start_pass = start_pass;
 
   /* Mark tables unallocated */
diff --git a/jdatadst.c b/jdatadst.c
index 6981fb7..5c8681c 100644
--- a/jdatadst.c
+++ b/jdatadst.c
@@ -226,6 +226,9 @@
  * larger memory, so the buffer is available to the application after
  * finishing compression, and then the application is responsible for
  * freeing the requested memory.
+ * Note:  An initial buffer supplied by the caller is expected to be
+ * managed by the application.  The library does not free such buffer
+ * when allocating a larger buffer.
  */
 
 GLOBAL(void)
diff --git a/jdcolor.c b/jdcolor.c
index 83e4d06..939df75 100644
--- a/jdcolor.c
+++ b/jdcolor.c
@@ -2,7 +2,7 @@
  * jdcolor.c
  *
  * Copyright (C) 1991-1997, Thomas G. Lane.
- * Modified 2011 by Guido Vollbeding.
+ * Modified 2011-2012 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -215,8 +215,8 @@
 		  JSAMPARRAY output_buf, int num_rows)
 {
   my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
-  register int r, g, b;
   register INT32 * ctab = cconvert->rgb_y_tab;
+  register int r, g, b;
   register JSAMPROW outptr;
   register JSAMPROW inptr0, inptr1, inptr2;
   register JDIMENSION col;
@@ -242,6 +242,86 @@
 
 
 /*
+ * [R-G,G,B-G] to [R,G,B] conversion with modulo calculation
+ * (inverse color transform).
+ */
+
+METHODDEF(void)
+rgb1_rgb_convert (j_decompress_ptr cinfo,
+		  JSAMPIMAGE input_buf, JDIMENSION input_row,
+		  JSAMPARRAY output_buf, int num_rows)
+{
+  register int r, g, b;
+  register JSAMPROW outptr;
+  register JSAMPROW inptr0, inptr1, inptr2;
+  register JDIMENSION col;
+  JDIMENSION num_cols = cinfo->output_width;
+
+  while (--num_rows >= 0) {
+    inptr0 = input_buf[0][input_row];
+    inptr1 = input_buf[1][input_row];
+    inptr2 = input_buf[2][input_row];
+    input_row++;
+    outptr = *output_buf++;
+    for (col = 0; col < num_cols; col++) {
+      r = GETJSAMPLE(inptr0[col]);
+      g = GETJSAMPLE(inptr1[col]);
+      b = GETJSAMPLE(inptr2[col]);
+      /* Assume that MAXJSAMPLE+1 is a power of 2, so that the MOD
+       * (modulo) operator is equivalent to the bitmask operator AND.
+       */
+      outptr[RGB_RED]   = (JSAMPLE) ((r + g - CENTERJSAMPLE) & MAXJSAMPLE);
+      outptr[RGB_GREEN] = (JSAMPLE) g;
+      outptr[RGB_BLUE]  = (JSAMPLE) ((b + g - CENTERJSAMPLE) & MAXJSAMPLE);
+      outptr += RGB_PIXELSIZE;
+    }
+  }
+}
+
+
+/*
+ * [R-G,G,B-G] to grayscale conversion with modulo calculation
+ * (inverse color transform).
+ */
+
+METHODDEF(void)
+rgb1_gray_convert (j_decompress_ptr cinfo,
+		   JSAMPIMAGE input_buf, JDIMENSION input_row,
+		   JSAMPARRAY output_buf, int num_rows)
+{
+  my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
+  register INT32 * ctab = cconvert->rgb_y_tab;
+  register int r, g, b;
+  register JSAMPROW outptr;
+  register JSAMPROW inptr0, inptr1, inptr2;
+  register JDIMENSION col;
+  JDIMENSION num_cols = cinfo->output_width;
+
+  while (--num_rows >= 0) {
+    inptr0 = input_buf[0][input_row];
+    inptr1 = input_buf[1][input_row];
+    inptr2 = input_buf[2][input_row];
+    input_row++;
+    outptr = *output_buf++;
+    for (col = 0; col < num_cols; col++) {
+      r = GETJSAMPLE(inptr0[col]);
+      g = GETJSAMPLE(inptr1[col]);
+      b = GETJSAMPLE(inptr2[col]);
+      /* Assume that MAXJSAMPLE+1 is a power of 2, so that the MOD
+       * (modulo) operator is equivalent to the bitmask operator AND.
+       */
+      r = (r + g - CENTERJSAMPLE) & MAXJSAMPLE;
+      b = (b + g - CENTERJSAMPLE) & MAXJSAMPLE;
+      /* Y */
+      outptr[col] = (JSAMPLE)
+		((ctab[r+R_Y_OFF] + ctab[g+G_Y_OFF] + ctab[b+B_Y_OFF])
+		 >> SCALEBITS);
+    }
+  }
+}
+
+
+/*
  * No colorspace change, but conversion from separate-planes
  * to interleaved representation.
  */
@@ -283,19 +363,20 @@
 	      JSAMPIMAGE input_buf, JDIMENSION input_row,
 	      JSAMPARRAY output_buf, int num_rows)
 {
-  register JSAMPROW inptr, outptr;
-  register JDIMENSION count;
-  register int num_components = cinfo->num_components;
-  JDIMENSION num_cols = cinfo->output_width;
   int ci;
+  register int nc = cinfo->num_components;
+  register JSAMPROW outptr;
+  register JSAMPROW inptr;
+  register JDIMENSION col;
+  JDIMENSION num_cols = cinfo->output_width;
 
   while (--num_rows >= 0) {
-    for (ci = 0; ci < num_components; ci++) {
+    for (ci = 0; ci < nc; ci++) {
       inptr = input_buf[ci][input_row];
       outptr = output_buf[0] + ci;
-      for (count = num_cols; count > 0; count--) {
+      for (col = 0; col < num_cols; col++) {
 	*outptr = *inptr++;	/* needn't bother with GETJSAMPLE() here */
-	outptr += num_components;
+	outptr += nc;
       }
     }
     input_row++;
@@ -331,7 +412,8 @@
 		  JSAMPIMAGE input_buf, JDIMENSION input_row,
 		  JSAMPARRAY output_buf, int num_rows)
 {
-  register JSAMPROW inptr, outptr;
+  register JSAMPROW outptr;
+  register JSAMPROW inptr;
   register JDIMENSION col;
   JDIMENSION num_cols = cinfo->output_width;
 
@@ -422,7 +504,7 @@
   cconvert = (my_cconvert_ptr)
     (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
 				SIZEOF(my_color_deconverter));
-  cinfo->cconvert = (struct jpeg_color_deconverter *) cconvert;
+  cinfo->cconvert = &cconvert->pub;
   cconvert->pub.start_pass = start_pass_dcolor;
 
   /* Make sure num_components agrees with jpeg_color_space */
@@ -450,6 +532,10 @@
     break;
   }
 
+  /* Support color transform only for RGB colorspace */
+  if (cinfo->color_transform && cinfo->jpeg_color_space != JCS_RGB)
+    ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
+
   /* Set out_color_components and conversion method based on requested space.
    * Also clear the component_needed flags for any unused components,
    * so that earlier pipeline stages can avoid useless computation.
@@ -465,7 +551,17 @@
       for (ci = 1; ci < cinfo->num_components; ci++)
 	cinfo->comp_info[ci].component_needed = FALSE;
     } else if (cinfo->jpeg_color_space == JCS_RGB) {
-      cconvert->pub.color_convert = rgb_gray_convert;
+      switch (cinfo->color_transform) {
+      case JCT_NONE:
+	cconvert->pub.color_convert = rgb_gray_convert;
+	break;
+      case JCT_SUBTRACT_GREEN:
+	cconvert->pub.color_convert = rgb1_gray_convert;
+	break;
+      default:
+	ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
+	break;
+      }
       build_rgb_y_table(cinfo);
     } else
       ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
@@ -479,7 +575,17 @@
     } else if (cinfo->jpeg_color_space == JCS_GRAYSCALE) {
       cconvert->pub.color_convert = gray_rgb_convert;
     } else if (cinfo->jpeg_color_space == JCS_RGB) {
-      cconvert->pub.color_convert = rgb_convert;
+      switch (cinfo->color_transform) {
+      case JCT_NONE:
+	cconvert->pub.color_convert = rgb_convert;
+	break;
+      case JCT_SUBTRACT_GREEN:
+	cconvert->pub.color_convert = rgb1_rgb_convert;
+	break;
+      default:
+	ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
+	break;
+      }
     } else
       ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
     break;
diff --git a/jdhuff.c b/jdhuff.c
index 06f92fe..e548e68 100644
--- a/jdhuff.c
+++ b/jdhuff.c
@@ -2,7 +2,7 @@
  * jdhuff.c
  *
  * Copyright (C) 1991-1997, Thomas G. Lane.
- * Modified 2006-2009 by Guido Vollbeding.
+ * Modified 2006-2012 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -797,7 +797,7 @@
 
     /* There is always only one block per MCU */
 
-    if (EOBRUN > 0)		/* if it's a band of zeroes... */
+    if (EOBRUN)			/* if it's a band of zeroes... */
       EOBRUN--;			/* ...process it now (we do nothing) */
     else {
       BITREAD_LOAD_STATE(cinfo,entropy->bitstate);
@@ -816,18 +816,17 @@
 	  /* Scale and output coefficient in natural (dezigzagged) order */
 	  (*block)[natural_order[k]] = (JCOEF) (s << Al);
 	} else {
-	  if (r == 15) {	/* ZRL */
-	    k += 15;		/* skip 15 zeroes in band */
-	  } else {		/* EOBr, run length is 2^r + appended bits */
-	    EOBRUN = 1 << r;
+	  if (r != 15) {	/* EOBr, run length is 2^r + appended bits */
 	    if (r) {		/* EOBr, r > 0 */
+	      EOBRUN = 1 << r;
 	      CHECK_BIT_BUFFER(br_state, r, return FALSE);
 	      r = GET_BITS(r);
 	      EOBRUN += r;
+	      EOBRUN--;		/* this band is processed at this moment */
 	    }
-	    EOBRUN--;		/* this band is processed at this moment */
 	    break;		/* force end-of-band */
 	  }
+	  k += 15;		/* ZRL: skip 15 zeroes in band */
 	}
       }
 
@@ -951,7 +950,7 @@
     k = cinfo->Ss;
 
     if (EOBRUN == 0) {
-      for (; k <= Se; k++) {
+      do {
 	HUFF_DECODE(s, br_state, tbl, goto undoit, label3);
 	r = s >> 4;
 	s &= 15;
@@ -981,7 +980,7 @@
 	 */
 	do {
 	  thiscoef = *block + natural_order[k];
-	  if (*thiscoef != 0) {
+	  if (*thiscoef) {
 	    CHECK_BIT_BUFFER(br_state, 1, goto undoit);
 	    if (GET_BITS(1)) {
 	      if ((*thiscoef & p1) == 0) { /* do nothing if already set it */
@@ -1004,18 +1003,19 @@
 	  /* Remember its position in case we have to suspend */
 	  newnz_pos[num_newnz++] = pos;
 	}
-      }
+	k++;
+      } while (k <= Se);
     }
 
-    if (EOBRUN > 0) {
+    if (EOBRUN) {
       /* Scan any remaining coefficient positions after the end-of-band
        * (the last newly nonzero coefficient, if any).  Append a correction
        * bit to each already-nonzero coefficient.  A correction bit is 1
        * if the absolute value of the coefficient must be increased.
        */
-      for (; k <= Se; k++) {
+      do {
 	thiscoef = *block + natural_order[k];
-	if (*thiscoef != 0) {
+	if (*thiscoef) {
 	  CHECK_BIT_BUFFER(br_state, 1, goto undoit);
 	  if (GET_BITS(1)) {
 	    if ((*thiscoef & p1) == 0) { /* do nothing if already changed it */
@@ -1026,7 +1026,8 @@
 	    }
 	  }
 	}
-      }
+	k++;
+      } while (k <= Se);
       /* Count one block completed in EOB run */
       EOBRUN--;
     }
@@ -1043,7 +1044,7 @@
 
 undoit:
   /* Re-zero any output coefficients that we made newly nonzero */
-  while (num_newnz > 0)
+  while (num_newnz)
     (*block)[newnz_pos[--num_newnz]] = 0;
 
   return FALSE;
@@ -1514,7 +1515,7 @@
   entropy = (huff_entropy_ptr)
     (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
 				SIZEOF(huff_entropy_decoder));
-  cinfo->entropy = (struct jpeg_entropy_decoder *) entropy;
+  cinfo->entropy = &entropy->pub;
   entropy->pub.start_pass = start_pass_huff_decoder;
 
   if (cinfo->progressive_mode) {
diff --git a/jdmainct.c b/jdmainct.c
index 02723ca..52091fb 100644
--- a/jdmainct.c
+++ b/jdmainct.c
@@ -2,6 +2,7 @@
  * jdmainct.c
  *
  * Copyright (C) 1994-1996, Thomas G. Lane.
+ * Modified 2002-2012 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -159,7 +160,7 @@
  * This is done only once, not once per pass.
  */
 {
-  my_main_ptr main = (my_main_ptr) cinfo->main;
+  my_main_ptr mainp = (my_main_ptr) cinfo->main;
   int ci, rgroup;
   int M = cinfo->min_DCT_v_scaled_size;
   jpeg_component_info *compptr;
@@ -168,10 +169,10 @@
   /* Get top-level space for component array pointers.
    * We alloc both arrays with one call to save a few cycles.
    */
-  main->xbuffer[0] = (JSAMPIMAGE)
+  mainp->xbuffer[0] = (JSAMPIMAGE)
     (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
 				cinfo->num_components * 2 * SIZEOF(JSAMPARRAY));
-  main->xbuffer[1] = main->xbuffer[0] + cinfo->num_components;
+  mainp->xbuffer[1] = mainp->xbuffer[0] + cinfo->num_components;
 
   for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
        ci++, compptr++) {
@@ -184,9 +185,9 @@
       (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
 				  2 * (rgroup * (M + 4)) * SIZEOF(JSAMPROW));
     xbuf += rgroup;		/* want one row group at negative offsets */
-    main->xbuffer[0][ci] = xbuf;
+    mainp->xbuffer[0][ci] = xbuf;
     xbuf += rgroup * (M + 4);
-    main->xbuffer[1][ci] = xbuf;
+    mainp->xbuffer[1][ci] = xbuf;
   }
 }
 
@@ -200,7 +201,7 @@
  * This will be repeated at the beginning of each pass.
  */
 {
-  my_main_ptr main = (my_main_ptr) cinfo->main;
+  my_main_ptr mainp = (my_main_ptr) cinfo->main;
   int ci, i, rgroup;
   int M = cinfo->min_DCT_v_scaled_size;
   jpeg_component_info *compptr;
@@ -210,10 +211,10 @@
        ci++, compptr++) {
     rgroup = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) /
       cinfo->min_DCT_v_scaled_size; /* height of a row group of component */
-    xbuf0 = main->xbuffer[0][ci];
-    xbuf1 = main->xbuffer[1][ci];
+    xbuf0 = mainp->xbuffer[0][ci];
+    xbuf1 = mainp->xbuffer[1][ci];
     /* First copy the workspace pointers as-is */
-    buf = main->buffer[ci];
+    buf = mainp->buffer[ci];
     for (i = 0; i < rgroup * (M + 2); i++) {
       xbuf0[i] = xbuf1[i] = buf[i];
     }
@@ -240,7 +241,7 @@
  * This changes the pointer list state from top-of-image to the normal state.
  */
 {
-  my_main_ptr main = (my_main_ptr) cinfo->main;
+  my_main_ptr mainp = (my_main_ptr) cinfo->main;
   int ci, i, rgroup;
   int M = cinfo->min_DCT_v_scaled_size;
   jpeg_component_info *compptr;
@@ -250,8 +251,8 @@
        ci++, compptr++) {
     rgroup = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) /
       cinfo->min_DCT_v_scaled_size; /* height of a row group of component */
-    xbuf0 = main->xbuffer[0][ci];
-    xbuf1 = main->xbuffer[1][ci];
+    xbuf0 = mainp->xbuffer[0][ci];
+    xbuf1 = mainp->xbuffer[1][ci];
     for (i = 0; i < rgroup; i++) {
       xbuf0[i - rgroup] = xbuf0[rgroup*(M+1) + i];
       xbuf1[i - rgroup] = xbuf1[rgroup*(M+1) + i];
@@ -269,7 +270,7 @@
  * Also sets rowgroups_avail to indicate number of nondummy row groups in row.
  */
 {
-  my_main_ptr main = (my_main_ptr) cinfo->main;
+  my_main_ptr mainp = (my_main_ptr) cinfo->main;
   int ci, i, rgroup, iMCUheight, rows_left;
   jpeg_component_info *compptr;
   JSAMPARRAY xbuf;
@@ -286,12 +287,12 @@
      * so we need only do it once.
      */
     if (ci == 0) {
-      main->rowgroups_avail = (JDIMENSION) ((rows_left-1) / rgroup + 1);
+      mainp->rowgroups_avail = (JDIMENSION) ((rows_left-1) / rgroup + 1);
     }
     /* Duplicate the last real sample row rgroup*2 times; this pads out the
      * last partial rowgroup and ensures at least one full rowgroup of context.
      */
-    xbuf = main->xbuffer[main->whichptr][ci];
+    xbuf = mainp->xbuffer[mainp->whichptr][ci];
     for (i = 0; i < rgroup * 2; i++) {
       xbuf[rows_left + i] = xbuf[rows_left-1];
     }
@@ -306,27 +307,27 @@
 METHODDEF(void)
 start_pass_main (j_decompress_ptr cinfo, J_BUF_MODE pass_mode)
 {
-  my_main_ptr main = (my_main_ptr) cinfo->main;
+  my_main_ptr mainp = (my_main_ptr) cinfo->main;
 
   switch (pass_mode) {
   case JBUF_PASS_THRU:
     if (cinfo->upsample->need_context_rows) {
-      main->pub.process_data = process_data_context_main;
+      mainp->pub.process_data = process_data_context_main;
       make_funny_pointers(cinfo); /* Create the xbuffer[] lists */
-      main->whichptr = 0;	/* Read first iMCU row into xbuffer[0] */
-      main->context_state = CTX_PREPARE_FOR_IMCU;
-      main->iMCU_row_ctr = 0;
+      mainp->whichptr = 0;	/* Read first iMCU row into xbuffer[0] */
+      mainp->context_state = CTX_PREPARE_FOR_IMCU;
+      mainp->iMCU_row_ctr = 0;
     } else {
       /* Simple case with no context needed */
-      main->pub.process_data = process_data_simple_main;
+      mainp->pub.process_data = process_data_simple_main;
     }
-    main->buffer_full = FALSE;	/* Mark buffer empty */
-    main->rowgroup_ctr = 0;
+    mainp->buffer_full = FALSE;	/* Mark buffer empty */
+    mainp->rowgroup_ctr = 0;
     break;
 #ifdef QUANT_2PASS_SUPPORTED
   case JBUF_CRANK_DEST:
     /* For last pass of 2-pass quantization, just crank the postprocessor */
-    main->pub.process_data = process_data_crank_post;
+    mainp->pub.process_data = process_data_crank_post;
     break;
 #endif
   default:
@@ -346,14 +347,14 @@
 			  JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,
 			  JDIMENSION out_rows_avail)
 {
-  my_main_ptr main = (my_main_ptr) cinfo->main;
+  my_main_ptr mainp = (my_main_ptr) cinfo->main;
   JDIMENSION rowgroups_avail;
 
   /* Read input data if we haven't filled the main buffer yet */
-  if (! main->buffer_full) {
-    if (! (*cinfo->coef->decompress_data) (cinfo, main->buffer))
+  if (! mainp->buffer_full) {
+    if (! (*cinfo->coef->decompress_data) (cinfo, mainp->buffer))
       return;			/* suspension forced, can do nothing more */
-    main->buffer_full = TRUE;	/* OK, we have an iMCU row to work with */
+    mainp->buffer_full = TRUE;	/* OK, we have an iMCU row to work with */
   }
 
   /* There are always min_DCT_scaled_size row groups in an iMCU row. */
@@ -364,14 +365,14 @@
    */
 
   /* Feed the postprocessor */
-  (*cinfo->post->post_process_data) (cinfo, main->buffer,
-				     &main->rowgroup_ctr, rowgroups_avail,
+  (*cinfo->post->post_process_data) (cinfo, mainp->buffer,
+				     &mainp->rowgroup_ctr, rowgroups_avail,
 				     output_buf, out_row_ctr, out_rows_avail);
 
   /* Has postprocessor consumed all the data yet? If so, mark buffer empty */
-  if (main->rowgroup_ctr >= rowgroups_avail) {
-    main->buffer_full = FALSE;
-    main->rowgroup_ctr = 0;
+  if (mainp->rowgroup_ctr >= rowgroups_avail) {
+    mainp->buffer_full = FALSE;
+    mainp->rowgroup_ctr = 0;
   }
 }
 
@@ -386,15 +387,15 @@
 			   JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,
 			   JDIMENSION out_rows_avail)
 {
-  my_main_ptr main = (my_main_ptr) cinfo->main;
+  my_main_ptr mainp = (my_main_ptr) cinfo->main;
 
   /* Read input data if we haven't filled the main buffer yet */
-  if (! main->buffer_full) {
+  if (! mainp->buffer_full) {
     if (! (*cinfo->coef->decompress_data) (cinfo,
-					   main->xbuffer[main->whichptr]))
+					   mainp->xbuffer[mainp->whichptr]))
       return;			/* suspension forced, can do nothing more */
-    main->buffer_full = TRUE;	/* OK, we have an iMCU row to work with */
-    main->iMCU_row_ctr++;	/* count rows received */
+    mainp->buffer_full = TRUE;	/* OK, we have an iMCU row to work with */
+    mainp->iMCU_row_ctr++;	/* count rows received */
   }
 
   /* Postprocessor typically will not swallow all the input data it is handed
@@ -402,47 +403,47 @@
    * to exit and restart.  This switch lets us keep track of how far we got.
    * Note that each case falls through to the next on successful completion.
    */
-  switch (main->context_state) {
+  switch (mainp->context_state) {
   case CTX_POSTPONED_ROW:
     /* Call postprocessor using previously set pointers for postponed row */
-    (*cinfo->post->post_process_data) (cinfo, main->xbuffer[main->whichptr],
-			&main->rowgroup_ctr, main->rowgroups_avail,
+    (*cinfo->post->post_process_data) (cinfo, mainp->xbuffer[mainp->whichptr],
+			&mainp->rowgroup_ctr, mainp->rowgroups_avail,
 			output_buf, out_row_ctr, out_rows_avail);
-    if (main->rowgroup_ctr < main->rowgroups_avail)
+    if (mainp->rowgroup_ctr < mainp->rowgroups_avail)
       return;			/* Need to suspend */
-    main->context_state = CTX_PREPARE_FOR_IMCU;
+    mainp->context_state = CTX_PREPARE_FOR_IMCU;
     if (*out_row_ctr >= out_rows_avail)
       return;			/* Postprocessor exactly filled output buf */
     /*FALLTHROUGH*/
   case CTX_PREPARE_FOR_IMCU:
     /* Prepare to process first M-1 row groups of this iMCU row */
-    main->rowgroup_ctr = 0;
-    main->rowgroups_avail = (JDIMENSION) (cinfo->min_DCT_v_scaled_size - 1);
+    mainp->rowgroup_ctr = 0;
+    mainp->rowgroups_avail = (JDIMENSION) (cinfo->min_DCT_v_scaled_size - 1);
     /* Check for bottom of image: if so, tweak pointers to "duplicate"
      * the last sample row, and adjust rowgroups_avail to ignore padding rows.
      */
-    if (main->iMCU_row_ctr == cinfo->total_iMCU_rows)
+    if (mainp->iMCU_row_ctr == cinfo->total_iMCU_rows)
       set_bottom_pointers(cinfo);
-    main->context_state = CTX_PROCESS_IMCU;
+    mainp->context_state = CTX_PROCESS_IMCU;
     /*FALLTHROUGH*/
   case CTX_PROCESS_IMCU:
     /* Call postprocessor using previously set pointers */
-    (*cinfo->post->post_process_data) (cinfo, main->xbuffer[main->whichptr],
-			&main->rowgroup_ctr, main->rowgroups_avail,
+    (*cinfo->post->post_process_data) (cinfo, mainp->xbuffer[mainp->whichptr],
+			&mainp->rowgroup_ctr, mainp->rowgroups_avail,
 			output_buf, out_row_ctr, out_rows_avail);
-    if (main->rowgroup_ctr < main->rowgroups_avail)
+    if (mainp->rowgroup_ctr < mainp->rowgroups_avail)
       return;			/* Need to suspend */
     /* After the first iMCU, change wraparound pointers to normal state */
-    if (main->iMCU_row_ctr == 1)
+    if (mainp->iMCU_row_ctr == 1)
       set_wraparound_pointers(cinfo);
     /* Prepare to load new iMCU row using other xbuffer list */
-    main->whichptr ^= 1;	/* 0=>1 or 1=>0 */
-    main->buffer_full = FALSE;
+    mainp->whichptr ^= 1;	/* 0=>1 or 1=>0 */
+    mainp->buffer_full = FALSE;
     /* Still need to process last row group of this iMCU row, */
     /* which is saved at index M+1 of the other xbuffer */
-    main->rowgroup_ctr = (JDIMENSION) (cinfo->min_DCT_v_scaled_size + 1);
-    main->rowgroups_avail = (JDIMENSION) (cinfo->min_DCT_v_scaled_size + 2);
-    main->context_state = CTX_POSTPONED_ROW;
+    mainp->rowgroup_ctr = (JDIMENSION) (cinfo->min_DCT_v_scaled_size + 1);
+    mainp->rowgroups_avail = (JDIMENSION) (cinfo->min_DCT_v_scaled_size + 2);
+    mainp->context_state = CTX_POSTPONED_ROW;
   }
 }
 
@@ -475,15 +476,15 @@
 GLOBAL(void)
 jinit_d_main_controller (j_decompress_ptr cinfo, boolean need_full_buffer)
 {
-  my_main_ptr main;
+  my_main_ptr mainp;
   int ci, rgroup, ngroups;
   jpeg_component_info *compptr;
 
-  main = (my_main_ptr)
+  mainp = (my_main_ptr)
     (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
 				SIZEOF(my_main_controller));
-  cinfo->main = (struct jpeg_d_main_controller *) main;
-  main->pub.start_pass = start_pass_main;
+  cinfo->main = &mainp->pub;
+  mainp->pub.start_pass = start_pass_main;
 
   if (need_full_buffer)		/* shouldn't happen */
     ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
@@ -504,9 +505,9 @@
        ci++, compptr++) {
     rgroup = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) /
       cinfo->min_DCT_v_scaled_size; /* height of a row group of component */
-    main->buffer[ci] = (*cinfo->mem->alloc_sarray)
-			((j_common_ptr) cinfo, JPOOL_IMAGE,
-			 compptr->width_in_blocks * compptr->DCT_h_scaled_size,
-			 (JDIMENSION) (rgroup * ngroups));
+    mainp->buffer[ci] = (*cinfo->mem->alloc_sarray)
+      ((j_common_ptr) cinfo, JPOOL_IMAGE,
+       compptr->width_in_blocks * ((JDIMENSION) compptr->DCT_h_scaled_size),
+       (JDIMENSION) (rgroup * ngroups));
   }
 }
diff --git a/jdmarker.c b/jdmarker.c
index f2a9cc4..ce8b713 100644
--- a/jdmarker.c
+++ b/jdmarker.c
@@ -2,7 +2,7 @@
  * jdmarker.c
  *
  * Copyright (C) 1991-1998, Thomas G. Lane.
- * Modified 2009 by Guido Vollbeding.
+ * Modified 2009-2012 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -23,24 +23,24 @@
   M_SOF1  = 0xc1,
   M_SOF2  = 0xc2,
   M_SOF3  = 0xc3,
-  
+
   M_SOF5  = 0xc5,
   M_SOF6  = 0xc6,
   M_SOF7  = 0xc7,
-  
+
   M_JPG   = 0xc8,
   M_SOF9  = 0xc9,
   M_SOF10 = 0xca,
   M_SOF11 = 0xcb,
-  
+
   M_SOF13 = 0xcd,
   M_SOF14 = 0xce,
   M_SOF15 = 0xcf,
-  
+
   M_DHT   = 0xc4,
-  
+
   M_DAC   = 0xcc,
-  
+
   M_RST0  = 0xd0,
   M_RST1  = 0xd1,
   M_RST2  = 0xd2,
@@ -49,7 +49,7 @@
   M_RST5  = 0xd5,
   M_RST6  = 0xd6,
   M_RST7  = 0xd7,
-  
+
   M_SOI   = 0xd8,
   M_EOI   = 0xd9,
   M_SOS   = 0xda,
@@ -58,7 +58,7 @@
   M_DRI   = 0xdd,
   M_DHP   = 0xde,
   M_EXP   = 0xdf,
-  
+
   M_APP0  = 0xe0,
   M_APP1  = 0xe1,
   M_APP2  = 0xe2,
@@ -75,13 +75,14 @@
   M_APP13 = 0xed,
   M_APP14 = 0xee,
   M_APP15 = 0xef,
-  
+
   M_JPG0  = 0xf0,
+  M_JPG8  = 0xf8,
   M_JPG13 = 0xfd,
   M_COM   = 0xfe,
-  
+
   M_TEM   = 0x01,
-  
+
   M_ERROR = 0x100
 } JPEG_MARKER;
 
@@ -217,6 +218,7 @@
   /* Set initial assumptions for colorspace etc */
 
   cinfo->jpeg_color_space = JCS_UNKNOWN;
+  cinfo->color_transform = JCT_NONE;
   cinfo->CCIR601_sampling = FALSE; /* Assume non-CCIR sampling??? */
 
   cinfo->saw_JFIF_marker = FALSE;
@@ -240,7 +242,7 @@
 /* Process a SOFn marker */
 {
   INT32 length;
-  int c, ci;
+  int c, ci, i;
   jpeg_component_info * compptr;
   INPUT_VARS(cinfo);
 
@@ -278,11 +280,27 @@
     cinfo->comp_info = (jpeg_component_info *) (*cinfo->mem->alloc_small)
 			((j_common_ptr) cinfo, JPOOL_IMAGE,
 			 cinfo->num_components * SIZEOF(jpeg_component_info));
-  
-  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
-       ci++, compptr++) {
+
+  for (ci = 0; ci < cinfo->num_components; ci++) {
+    INPUT_BYTE(cinfo, c, return FALSE);
+    /* Check to see whether component id has already been seen   */
+    /* (in violation of the spec, but unfortunately seen in some */
+    /* files).  If so, create "fake" component id equal to the   */
+    /* max id seen so far + 1. */
+    for (i = 0, compptr = cinfo->comp_info; i < ci; i++, compptr++) {
+      if (c == compptr->component_id) {
+	compptr = cinfo->comp_info;
+	c = compptr->component_id;
+	compptr++;
+	for (i = 1; i < ci; i++, compptr++) {
+	  if (compptr->component_id > c) c = compptr->component_id;
+	}
+	c++;
+	break;
+      }
+    }
+    compptr->component_id = c;
     compptr->component_index = ci;
-    INPUT_BYTE(cinfo, compptr->component_id, return FALSE);
     INPUT_BYTE(cinfo, c, return FALSE);
     compptr->h_samp_factor = (c >> 4) & 15;
     compptr->v_samp_factor = (c     ) & 15;
@@ -305,12 +323,12 @@
 /* Process a SOS marker */
 {
   INT32 length;
-  int i, ci, n, c, cc;
+  int c, ci, i, n;
   jpeg_component_info * compptr;
   INPUT_VARS(cinfo);
 
   if (! cinfo->marker->saw_SOF)
-    ERREXIT(cinfo, JERR_SOS_NO_SOF);
+    ERREXITS(cinfo, JERR_SOF_BEFORE, "SOS");
 
   INPUT_2BYTES(cinfo, length, return FALSE);
 
@@ -328,24 +346,38 @@
   /* Collect the component-spec parameters */
 
   for (i = 0; i < n; i++) {
-    INPUT_BYTE(cinfo, cc, return FALSE);
     INPUT_BYTE(cinfo, c, return FALSE);
-    
+
+    /* Detect the case where component id's are not unique, and, if so, */
+    /* create a fake component id using the same logic as in get_sof.   */
+    for (ci = 0; ci < i; ci++) {
+      if (c == cinfo->cur_comp_info[ci]->component_id) {
+	c = cinfo->cur_comp_info[0]->component_id;
+	for (ci = 1; ci < i; ci++) {
+	  compptr = cinfo->cur_comp_info[ci];
+	  if (compptr->component_id > c) c = compptr->component_id;
+	}
+	c++;
+	break;
+      }
+    }
+
     for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
 	 ci++, compptr++) {
-      if (cc == compptr->component_id)
+      if (c == compptr->component_id)
 	goto id_found;
     }
 
-    ERREXIT1(cinfo, JERR_BAD_COMPONENT_ID, cc);
+    ERREXIT1(cinfo, JERR_BAD_COMPONENT_ID, c);
 
   id_found:
 
     cinfo->cur_comp_info[i] = compptr;
+    INPUT_BYTE(cinfo, c, return FALSE);
     compptr->dc_tbl_no = (c >> 4) & 15;
     compptr->ac_tbl_no = (c     ) & 15;
-    
-    TRACEMS3(cinfo, 1, JTRC_SOS_COMPONENT, cc,
+
+    TRACEMS3(cinfo, 1, JTRC_SOS_COMPONENT, compptr->component_id,
 	     compptr->dc_tbl_no, compptr->ac_tbl_no);
   }
 
@@ -605,6 +637,68 @@
 }
 
 
+LOCAL(boolean)
+get_lse (j_decompress_ptr cinfo)
+/* Process an LSE marker */
+{
+  INT32 length;
+  unsigned int tmp;
+  int cid;
+  INPUT_VARS(cinfo);
+
+  if (! cinfo->marker->saw_SOF)
+    ERREXITS(cinfo, JERR_SOF_BEFORE, "LSE");
+
+  if (cinfo->num_components < 3) goto bad;
+
+  INPUT_2BYTES(cinfo, length, return FALSE);
+
+  if (length != 24)
+    ERREXIT(cinfo, JERR_BAD_LENGTH);
+
+  INPUT_BYTE(cinfo, tmp, return FALSE);
+  if (tmp != 0x0D)	/* ID inverse transform specification */
+    ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, cinfo->unread_marker);
+  INPUT_2BYTES(cinfo, tmp, return FALSE);
+  if (tmp != MAXJSAMPLE) goto bad;		/* MAXTRANS */
+  INPUT_BYTE(cinfo, tmp, return FALSE);
+  if (tmp != 3) goto bad;			/* Nt=3 */
+  INPUT_BYTE(cinfo, cid, return FALSE);
+  if (cid != cinfo->comp_info[1].component_id) goto bad;
+  INPUT_BYTE(cinfo, cid, return FALSE);
+  if (cid != cinfo->comp_info[0].component_id) goto bad;
+  INPUT_BYTE(cinfo, cid, return FALSE);
+  if (cid != cinfo->comp_info[2].component_id) goto bad;
+  INPUT_BYTE(cinfo, tmp, return FALSE);
+  if (tmp != 0x80) goto bad;		/* F1: CENTER1=1, NORM1=0 */
+  INPUT_2BYTES(cinfo, tmp, return FALSE);
+  if (tmp != 0) goto bad;			/* A(1,1)=0 */
+  INPUT_2BYTES(cinfo, tmp, return FALSE);
+  if (tmp != 0) goto bad;			/* A(1,2)=0 */
+  INPUT_BYTE(cinfo, tmp, return FALSE);
+  if (tmp != 0) goto bad;		/* F2: CENTER2=0, NORM2=0 */
+  INPUT_2BYTES(cinfo, tmp, return FALSE);
+  if (tmp != 1) goto bad;			/* A(2,1)=1 */
+  INPUT_2BYTES(cinfo, tmp, return FALSE);
+  if (tmp != 0) goto bad;			/* A(2,2)=0 */
+  INPUT_BYTE(cinfo, tmp, return FALSE);
+  if (tmp != 0) goto bad;		/* F3: CENTER3=0, NORM3=0 */
+  INPUT_2BYTES(cinfo, tmp, return FALSE);
+  if (tmp != 1) goto bad;			/* A(3,1)=1 */
+  INPUT_2BYTES(cinfo, tmp, return FALSE);
+  if (tmp != 0) {				/* A(3,2)=0 */
+    bad:
+    ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
+  }
+
+  /* OK, valid transform that we can handle. */
+  cinfo->color_transform = JCT_SUBTRACT_GREEN;
+
+  INPUT_SYNC(cinfo);
+  return TRUE;
+}
+
+
 /*
  * Routines for processing APPn and COM markers.
  * These are either saved in memory or discarded, per application request.
@@ -1059,32 +1153,37 @@
 	return JPEG_SUSPENDED;
       cinfo->unread_marker = 0;	/* processed the marker */
       return JPEG_REACHED_SOS;
-    
+
     case M_EOI:
       TRACEMS(cinfo, 1, JTRC_EOI);
       cinfo->unread_marker = 0;	/* processed the marker */
       return JPEG_REACHED_EOI;
-      
+
     case M_DAC:
       if (! get_dac(cinfo))
 	return JPEG_SUSPENDED;
       break;
-      
+
     case M_DHT:
       if (! get_dht(cinfo))
 	return JPEG_SUSPENDED;
       break;
-      
+
     case M_DQT:
       if (! get_dqt(cinfo))
 	return JPEG_SUSPENDED;
       break;
-      
+
     case M_DRI:
       if (! get_dri(cinfo))
 	return JPEG_SUSPENDED;
       break;
-      
+
+    case M_JPG8:
+      if (! get_lse(cinfo))
+	return JPEG_SUSPENDED;
+      break;
+
     case M_APP0:
     case M_APP1:
     case M_APP2:
@@ -1105,7 +1204,7 @@
 		cinfo->unread_marker - (int) M_APP0]) (cinfo))
 	return JPEG_SUSPENDED;
       break;
-      
+
     case M_COM:
       if (! (*((my_marker_ptr) cinfo->marker)->process_COM) (cinfo))
 	return JPEG_SUSPENDED;
@@ -1314,7 +1413,7 @@
   marker = (my_marker_ptr)
     (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT,
 				SIZEOF(my_marker_reader));
-  cinfo->marker = (struct jpeg_marker_reader *) marker;
+  cinfo->marker = &marker->pub;
   /* Initialize public method pointers */
   marker->pub.reset_marker_reader = reset_marker_reader;
   marker->pub.read_markers = read_markers;
diff --git a/jerror.c b/jerror.c
index 3da7be8..8c0b9e0 100644
--- a/jerror.c
+++ b/jerror.c
@@ -2,6 +2,7 @@
  * jerror.c
  *
  * Copyright (C) 1991-1998, Thomas G. Lane.
+ * Modified 2012 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -66,7 +67,7 @@
  * or jpeg_destroy) at some point.
  */
 
-METHODDEF(void)
+METHODDEF(noreturn_t)
 error_exit (j_common_ptr cinfo)
 {
   /* Always display the message */
diff --git a/jerror.h b/jerror.h
index 1cfb2b1..a4b661f 100644
--- a/jerror.h
+++ b/jerror.h
@@ -2,7 +2,7 @@
  * jerror.h
  *
  * Copyright (C) 1994-1997, Thomas G. Lane.
- * Modified 1997-2009 by Guido Vollbeding.
+ * Modified 1997-2012 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -106,11 +106,11 @@
 	 "Cannot quantize more than %d color components")
 JMESSAGE(JERR_QUANT_FEW_COLORS, "Cannot quantize to fewer than %d colors")
 JMESSAGE(JERR_QUANT_MANY_COLORS, "Cannot quantize to more than %d colors")
+JMESSAGE(JERR_SOF_BEFORE, "Invalid JPEG file structure: %s before SOF")
 JMESSAGE(JERR_SOF_DUPLICATE, "Invalid JPEG file structure: two SOF markers")
 JMESSAGE(JERR_SOF_NO_SOS, "Invalid JPEG file structure: missing SOS marker")
 JMESSAGE(JERR_SOF_UNSUPPORTED, "Unsupported JPEG process: SOF type 0x%02x")
 JMESSAGE(JERR_SOI_DUPLICATE, "Invalid JPEG file structure: two SOI markers")
-JMESSAGE(JERR_SOS_NO_SOF, "Invalid JPEG file structure: SOS before SOF")
 JMESSAGE(JERR_TFILE_CREATE, "Failed to create temporary file %s")
 JMESSAGE(JERR_TFILE_READ, "Read failed on temporary file")
 JMESSAGE(JERR_TFILE_SEEK, "Seek failed on temporary file")
diff --git a/jmemmgr.c b/jmemmgr.c
index f0e83fb..0a137cd 100644
--- a/jmemmgr.c
+++ b/jmemmgr.c
@@ -2,7 +2,7 @@
  * jmemmgr.c
  *
  * Copyright (C) 1991-1997, Thomas G. Lane.
- * Modified 2011 by Guido Vollbeding.
+ * Modified 2011-2012 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -214,7 +214,7 @@
 #endif /* MEM_STATS */
 
 
-LOCAL(void)
+LOCAL(noreturn_t)
 out_of_memory (j_common_ptr cinfo, int which)
 /* Report an out-of-memory error and stop execution */
 /* If we compiled MEM_STATS support, report alloc requests before dying */
diff --git a/jmorecfg.h b/jmorecfg.h
index 6c085c3..2407edb 100644
--- a/jmorecfg.h
+++ b/jmorecfg.h
@@ -2,7 +2,7 @@
  * jmorecfg.h
  *
  * Copyright (C) 1991-1997, Thomas G. Lane.
- * Modified 1997-2011 by Guido Vollbeding.
+ * Modified 1997-2012 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -210,6 +210,26 @@
 #endif
 
 
+/* The noreturn type identifier is used to declare functions
+ * which cannot return.
+ * Compilers can thus create more optimized code and perform
+ * better checks for warnings and errors.
+ * Static analyzer tools can make improved inferences about
+ * execution paths and are prevented from giving false alerts.
+ *
+ * Unfortunately, the proposed specifications of corresponding
+ * extensions in the Dec 2011 ISO C standard revision (C11),
+ * GCC, MSVC, etc. are not viable.
+ * Thus we introduce a user defined type to declare noreturn
+ * functions at least for clarity.  A proper compiler would
+ * have a suitable noreturn type to match in place of void.
+ */
+
+#ifndef HAVE_NORETURN_T
+typedef void noreturn_t;
+#endif
+
+
 /* Here is the pseudo-keyword for declaring pointers that must be "far"
  * on 80x86 machines.  Most of the specialized coding for 80x86 is handled
  * by just saying "FAR *" where such a pointer is needed.  In a few places
@@ -232,15 +252,16 @@
  * Defining HAVE_BOOLEAN before including jpeglib.h should make it work.
  */
 
-#ifndef HAVE_BOOLEAN
-typedef int boolean;
-#endif
+#ifdef HAVE_BOOLEAN
 #ifndef FALSE			/* in case these macros already exist */
 #define FALSE	0		/* values of boolean */
 #endif
 #ifndef TRUE
 #define TRUE	1
 #endif
+#else
+typedef enum { FALSE = 0, TRUE = 1 } boolean;
+#endif
 
 
 /*
diff --git a/jpeglib.h b/jpeglib.h
index 1327cff..0a6dac4 100644
--- a/jpeglib.h
+++ b/jpeglib.h
@@ -2,7 +2,7 @@
  * jpeglib.h
  *
  * Copyright (C) 1991-1998, Thomas G. Lane.
- * Modified 2002-2011 by Guido Vollbeding.
+ * Modified 2002-2012 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -34,12 +34,12 @@
 #endif
 
 /* Version IDs for the JPEG library.
- * Might be useful for tests like "#if JPEG_LIB_VERSION >= 80".
+ * Might be useful for tests like "#if JPEG_LIB_VERSION >= 90".
  */
 
-#define JPEG_LIB_VERSION        80	/* Compatibility version 8.0 */
-#define JPEG_LIB_VERSION_MAJOR  8
-#define JPEG_LIB_VERSION_MINOR  4
+#define JPEG_LIB_VERSION        90	/* Compatibility version 9.0 */
+#define JPEG_LIB_VERSION_MAJOR  9
+#define JPEG_LIB_VERSION_MINOR  0
 
 
 /* Various constants determining the sizes of things.
@@ -221,6 +221,13 @@
 	JCS_YCCK		/* Y/Cb/Cr/K */
 } J_COLOR_SPACE;
 
+/* Supported color transforms. */
+
+typedef enum {
+	JCT_NONE           = 0,
+	JCT_SUBTRACT_GREEN = 1
+} J_COLOR_TRANSFORM;
+
 /* DCT/IDCT algorithm options. */
 
 typedef enum {
@@ -369,7 +376,10 @@
   UINT16 X_density;		/* Horizontal pixel density */
   UINT16 Y_density;		/* Vertical pixel density */
   boolean write_Adobe_marker;	/* should an Adobe marker be written? */
-  
+
+  J_COLOR_TRANSFORM color_transform;
+  /* Color transform identifier, writes LSE marker if nonzero */
+
   /* State variable: index of next scanline to be written to
    * jpeg_write_scanlines().  Application may use this to control its
    * processing loop, e.g., "while (next_scanline < image_height)".
@@ -589,6 +599,9 @@
   boolean saw_Adobe_marker;	/* TRUE iff an Adobe APP14 marker was found */
   UINT8 Adobe_transform;	/* Color transform code from Adobe marker */
 
+  J_COLOR_TRANSFORM color_transform;
+  /* Color transform identifier derived from LSE marker, otherwise zero */
+
   boolean CCIR601_sampling;	/* TRUE=first samples are cosited */
 
   /* Aside from the specific data retained from APPn markers known to the
@@ -681,7 +694,7 @@
 
 struct jpeg_error_mgr {
   /* Error exit handler: does not return to caller */
-  JMETHOD(void, error_exit, (j_common_ptr cinfo));
+  JMETHOD(noreturn_t, error_exit, (j_common_ptr cinfo));
   /* Conditionally emit a trace or warning message */
   JMETHOD(void, emit_message, (j_common_ptr cinfo, int msg_level));
   /* Routine that actually outputs a trace or error message */
diff --git a/jpegtran.c b/jpegtran.c
index e539e91..7e8ef0c 100644
--- a/jpegtran.c
+++ b/jpegtran.c
@@ -1,7 +1,7 @@
 /*
  * jpegtran.c
  *
- * Copyright (C) 1995-2011, Thomas G. Lane, Guido Vollbeding.
+ * Copyright (C) 1995-2012, Thomas G. Lane, Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -467,7 +467,7 @@
 
   /* Adjust default decompression parameters */
   if (scaleoption != NULL)
-    if (sscanf(scaleoption, "%d/%d",
+    if (sscanf(scaleoption, "%u/%u",
 	&srcinfo.scale_num, &srcinfo.scale_denom) < 1)
       usage();
 
diff --git a/jversion.h b/jversion.h
index 5d49151..232085f 100644
--- a/jversion.h
+++ b/jversion.h
@@ -1,7 +1,7 @@
 /*
  * jversion.h
  *
- * Copyright (C) 1991-2012, Thomas G. Lane, Guido Vollbeding.
+ * Copyright (C) 1991-2013, Thomas G. Lane, Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -9,6 +9,6 @@
  */
 
 
-#define JVERSION	"8d  15-Jan-2012"
+#define JVERSION	"9  13-Jan-2013"
 
-#define JCOPYRIGHT	"Copyright (C) 2012, Thomas G. Lane, Guido Vollbeding"
+#define JCOPYRIGHT	"Copyright (C) 2013, Thomas G. Lane, Guido Vollbeding"
diff --git a/libjpeg.map b/libjpeg.map
index ac77dca..fa70b1f 100644
--- a/libjpeg.map
+++ b/libjpeg.map
@@ -1,4 +1,4 @@
-LIBJPEG_8.0 {
+LIBJPEG_9.0 {
   global:
     *;
 };
diff --git a/libjpeg.txt b/libjpeg.txt
index 9702669..292a127 100644
--- a/libjpeg.txt
+++ b/libjpeg.txt
@@ -1,6 +1,6 @@
 USING THE IJG JPEG LIBRARY
 
-Copyright (C) 1994-2011, Thomas G. Lane, Guido Vollbeding.
+Copyright (C) 1994-2013, Thomas G. Lane, Guido Vollbeding.
 This file is part of the Independent JPEG Group's software.
 For conditions of distribution and use, see the accompanying README file.
 
@@ -876,6 +876,10 @@
 
 Compression parameters (cinfo fields) include:
 
+boolean arith_code
+	If TRUE, use arithmetic coding.
+	If FALSE, use Huffman coding.
+
 int block_size
 	Set DCT block size.  All N from 1 to 16 are possible.
 	Default is 8 (baseline format).
@@ -916,7 +920,16 @@
 int num_components
 	The JPEG color space and corresponding number of components; see
 	"Special color spaces", below, for more info.  We recommend using
-	jpeg_set_color_space() if you want to change these.
+	jpeg_set_colorspace() if you want to change these.
+
+J_COLOR_TRANSFORM color_transform
+	Internal color transform identifier, writes LSE marker if nonzero
+	(requires decoder with inverse color transform support, introduced
+	with IJG JPEG 9).
+	Two values are currently possible: JCT_NONE and JCT_SUBTRACT_GREEN.
+	Set this value for lossless RGB application *before* calling
+	jpeg_set_colorspace(), because entropy table assignment in
+	jpeg_set_colorspace() depends on color_transform.
 
 boolean optimize_coding
 	TRUE causes the compressor to compute optimal Huffman coding tables
diff --git a/makefile.ansi b/makefile.ansi
index 7d0499f..c0fe72b 100644
--- a/makefile.ansi
+++ b/makefile.ansi
@@ -74,9 +74,9 @@
 CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \
         jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \
         jconfig.vms
-CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp missing
-OTHERFILES= jconfig.txt ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm \
-        libjpeg.map
+CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp \
+        missing ar-lib
+OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map
 TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \
         testimgp.jpg
 DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \
diff --git a/makefile.bcc b/makefile.bcc
index d89e09b..68d68ef 100644
--- a/makefile.bcc
+++ b/makefile.bcc
@@ -101,9 +101,9 @@
 CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \
         jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \
         jconfig.vms
-CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp missing
-OTHERFILES= jconfig.txt ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm \
-        libjpeg.map
+CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp \
+        missing ar-lib
+OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map
 TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \
         testimgp.jpg
 DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \
diff --git a/makefile.dj b/makefile.dj
index 37b6ee7..f37c121 100644
--- a/makefile.dj
+++ b/makefile.dj
@@ -74,9 +74,9 @@
 CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \
         jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \
         jconfig.vms
-CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp missing
-OTHERFILES= jconfig.txt ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm \
-        libjpeg.map
+CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp \
+        missing ar-lib
+OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map
 TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \
         testimgp.jpg
 DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \
diff --git a/makefile.manx b/makefile.manx
index 471f408..57a1bb9 100644
--- a/makefile.manx
+++ b/makefile.manx
@@ -75,9 +75,9 @@
 CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \
         jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \
         jconfig.vms
-CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp missing
-OTHERFILES= jconfig.txt ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm \
-        libjpeg.map
+CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp \
+        missing ar-lib
+OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map
 TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \
         testimgp.jpg
 DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \
diff --git a/makefile.mc6 b/makefile.mc6
index 1ee83be..7dd37f1 100644
--- a/makefile.mc6
+++ b/makefile.mc6
@@ -72,9 +72,9 @@
 CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \
         jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \
         jconfig.vms
-CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp missing
-OTHERFILES= jconfig.txt ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm \
-        libjpeg.map
+CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp \
+        missing ar-lib
+OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map
 TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \
         testimgp.jpg
 DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \
diff --git a/makefile.mms b/makefile.mms
index 6019dfa..5349306 100644
--- a/makefile.mms
+++ b/makefile.mms
@@ -61,9 +61,9 @@
 CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \
         jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \
         jconfig.vms
-CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp missing
-OTHERFILES= jconfig.txt ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm \
-        libjpeg.map
+CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp \
+        missing ar-lib
+OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map
 TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \
         testimgp.jpg
 DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \
diff --git a/makefile.sas b/makefile.sas
index 252f8fb..ba0d63b 100644
--- a/makefile.sas
+++ b/makefile.sas
@@ -83,9 +83,9 @@
 CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \
         jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \
         jconfig.vms
-CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp missing
-OTHERFILES= jconfig.txt ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm \
-        libjpeg.map
+CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp \
+        missing ar-lib
+OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map
 TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \
         testimgp.jpg
 DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \
diff --git a/makefile.unix b/makefile.unix
index eaadfc1..7dfaf10 100644
--- a/makefile.unix
+++ b/makefile.unix
@@ -78,9 +78,9 @@
 CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \
         jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \
         jconfig.vms
-CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp missing
-OTHERFILES= jconfig.txt ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm \
-        libjpeg.map
+CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp \
+        missing ar-lib
+OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map
 TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \
         testimgp.jpg
 DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \
diff --git a/makefile.vc b/makefile.vc
index d4df9d4..ae46179 100644
--- a/makefile.vc
+++ b/makefile.vc
@@ -71,9 +71,9 @@
 CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \
         jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \
         jconfig.vms
-CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp missing
-OTHERFILES= jconfig.txt ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm \
-        libjpeg.map
+CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp \
+        missing ar-lib
+OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map
 TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \
         testimgp.jpg
 DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \
diff --git a/makefile.wat b/makefile.wat
index a3e652b..9cb8d61 100644
--- a/makefile.wat
+++ b/makefile.wat
@@ -73,9 +73,9 @@
 CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat &
         jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas &
         jconfig.vms
-CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp missing
-OTHERFILES= jconfig.txt ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm &
-        libjpeg.map
+CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp &
+        missing ar-lib
+OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map
 TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg &
         testimgp.jpg
 DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) &
diff --git a/missing b/missing
index 28055d2..cdea514 100755
--- a/missing
+++ b/missing
@@ -1,11 +1,10 @@
 #! /bin/sh
-# Common stub for a few missing GNU programs while installing.
+# Common wrapper for a few potentially missing GNU programs.
 
-scriptversion=2009-04-28.21; # UTC
+scriptversion=2012-06-26.16; # UTC
 
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006,
-# 2008, 2009 Free Software Foundation, Inc.
-# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+# Originally written by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -26,69 +25,40 @@
 # the same distribution terms that you use for the rest of that program.
 
 if test $# -eq 0; then
-  echo 1>&2 "Try \`$0 --help' for more information"
+  echo 1>&2 "Try '$0 --help' for more information"
   exit 1
 fi
 
-run=:
-sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
-sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
-
-# In the cases where this matters, `missing' is being run in the
-# srcdir already.
-if test -f configure.ac; then
-  configure_ac=configure.ac
-else
-  configure_ac=configure.in
-fi
-
-msg="missing on your system"
-
 case $1 in
---run)
-  # Try to run requested program, and just exit if it succeeds.
-  run=
-  shift
-  "$@" && exit 0
-  # Exit code 63 means version mismatch.  This often happens
-  # when the user try to use an ancient version of a tool on
-  # a file that requires a minimum version.  In this case we
-  # we should proceed has if the program had been absent, or
-  # if --run hadn't been passed.
-  if test $? = 63; then
-    run=:
-    msg="probably too old"
-  fi
-  ;;
+
+  --is-lightweight)
+    # Used by our autoconf macros to check whether the available missing
+    # script is modern enough.
+    exit 0
+    ;;
+
+  --run)
+    # Back-compat with the calling convention used by older automake.
+    shift
+    ;;
 
   -h|--h|--he|--hel|--help)
     echo "\
 $0 [OPTION]... PROGRAM [ARGUMENT]...
 
-Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
-error status if there is no known handling for PROGRAM.
+Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due
+to PROGRAM being missing or too old.
 
 Options:
   -h, --help      display this help and exit
   -v, --version   output version information and exit
-  --run           try to run the given command, and emulate it if it fails
 
 Supported PROGRAM values:
-  aclocal      touch file \`aclocal.m4'
-  autoconf     touch file \`configure'
-  autoheader   touch file \`config.h.in'
-  autom4te     touch the output file, or create a stub one
-  automake     touch all \`Makefile.in' files
-  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
-  flex         create \`lex.yy.c', if possible, from existing .c
-  help2man     touch the output file
-  lex          create \`lex.yy.c', if possible, from existing .c
-  makeinfo     touch the output file
-  tar          try tar, gnutar, gtar, then tar without non-portable flags
-  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]
+  aclocal   autoconf  autoheader   autom4te  automake  makeinfo
+  bison     yacc      flex         lex       help2man
 
-Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and
-\`g' are ignored when checking the name.
+Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and
+'g' are ignored when checking the name.
 
 Send bug reports to <bug-automake@gnu.org>."
     exit $?
@@ -100,272 +70,141 @@
     ;;
 
   -*)
-    echo 1>&2 "$0: Unknown \`$1' option"
-    echo 1>&2 "Try \`$0 --help' for more information"
+    echo 1>&2 "$0: unknown '$1' option"
+    echo 1>&2 "Try '$0 --help' for more information"
     exit 1
     ;;
 
 esac
 
-# normalize program name to check for.
-program=`echo "$1" | sed '
-  s/^gnu-//; t
-  s/^gnu//; t
-  s/^g//; t'`
+# Run the given program, remember its exit status.
+"$@"; st=$?
 
-# Now exit if we have it, but it failed.  Also exit now if we
-# don't have it and --version was passed (most likely to detect
-# the program).  This is about non-GNU programs, so use $1 not
-# $program.
-case $1 in
-  lex*|yacc*)
-    # Not GNU programs, they don't have --version.
+# If it succeeded, we are done.
+test $st -eq 0 && exit 0
+
+# Also exit now if we it failed (or wasn't found), and '--version' was
+# passed; such an option is passed most likely to detect whether the
+# program is present and works.
+case $2 in --version|--help) exit $st;; esac
+
+# Exit code 63 means version mismatch.  This often happens when the user
+# tries to use an ancient version of a tool on a file that requires a
+# minimum version.
+if test $st -eq 63; then
+  msg="probably too old"
+elif test $st -eq 127; then
+  # Program was missing.
+  msg="missing on your system"
+else
+  # Program was found and executed, but failed.  Give up.
+  exit $st
+fi
+
+perl_URL=http://www.perl.org/
+flex_URL=http://flex.sourceforge.net/
+gnu_software_URL=http://www.gnu.org/software
+
+program_details ()
+{
+  case $1 in
+    aclocal|automake)
+      echo "The '$1' program is part of the GNU Automake package:"
+      echo "<$gnu_software_URL/automake>"
+      echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:"
+      echo "<$gnu_software_URL/autoconf>"
+      echo "<$gnu_software_URL/m4/>"
+      echo "<$perl_URL>"
+      ;;
+    autoconf|autom4te|autoheader)
+      echo "The '$1' program is part of the GNU Autoconf package:"
+      echo "<$gnu_software_URL/autoconf/>"
+      echo "It also requires GNU m4 and Perl in order to run:"
+      echo "<$gnu_software_URL/m4/>"
+      echo "<$perl_URL>"
+      ;;
+  esac
+}
+
+give_advice ()
+{
+  # Normalize program name to check for.
+  normalized_program=`echo "$1" | sed '
+    s/^gnu-//; t
+    s/^gnu//; t
+    s/^g//; t'`
+
+  printf '%s\n' "'$1' is $msg."
+
+  configure_deps="'configure.ac' or m4 files included by 'configure.ac'"
+  case $normalized_program in
+    autoconf*)
+      echo "You should only need it if you modified 'configure.ac',"
+      echo "or m4 files included by it."
+      program_details 'autoconf'
+      ;;
+    autoheader*)
+      echo "You should only need it if you modified 'acconfig.h' or"
+      echo "$configure_deps."
+      program_details 'autoheader'
+      ;;
+    automake*)
+      echo "You should only need it if you modified 'Makefile.am' or"
+      echo "$configure_deps."
+      program_details 'automake'
+      ;;
+    aclocal*)
+      echo "You should only need it if you modified 'acinclude.m4' or"
+      echo "$configure_deps."
+      program_details 'aclocal'
+      ;;
+   autom4te*)
+      echo "You might have modified some maintainer files that require"
+      echo "the 'automa4te' program to be rebuilt."
+      program_details 'autom4te'
+      ;;
+    bison*|yacc*)
+      echo "You should only need it if you modified a '.y' file."
+      echo "You may want to install the GNU Bison package:"
+      echo "<$gnu_software_URL/bison/>"
+      ;;
+    lex*|flex*)
+      echo "You should only need it if you modified a '.l' file."
+      echo "You may want to install the Fast Lexical Analyzer package:"
+      echo "<$flex_URL>"
+      ;;
+    help2man*)
+      echo "You should only need it if you modified a dependency" \
+           "of a man page."
+      echo "You may want to install the GNU Help2man package:"
+      echo "<$gnu_software_URL/help2man/>"
     ;;
+    makeinfo*)
+      echo "You should only need it if you modified a '.texi' file, or"
+      echo "any other file indirectly affecting the aspect of the manual."
+      echo "You might want to install the Texinfo package:"
+      echo "<$gnu_software_URL/texinfo/>"
+      echo "The spurious makeinfo call might also be the consequence of"
+      echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might"
+      echo "want to install GNU make:"
+      echo "<$gnu_software_URL/make/>"
+      ;;
+    *)
+      echo "You might have modified some files without having the proper"
+      echo "tools for further handling them.  Check the 'README' file, it"
+      echo "often tells you about the needed prerequisites for installing"
+      echo "this package.  You may also peek at any GNU archive site, in"
+      echo "case some other package contains this missing '$1' program."
+      ;;
+  esac
+}
 
-  tar*)
-    if test -n "$run"; then
-       echo 1>&2 "ERROR: \`tar' requires --run"
-       exit 1
-    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
-       exit 1
-    fi
-    ;;
+give_advice "$1" | sed -e '1s/^/WARNING: /' \
+                       -e '2,$s/^/         /' >&2
 
-  *)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
-       # Could not run --version or --help.  This is probably someone
-       # running `$TOOL --version' or `$TOOL --help' to check whether
-       # $TOOL exists and not knowing $TOOL uses missing.
-       exit 1
-    fi
-    ;;
-esac
-
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case $program in
-  aclocal*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
-         to install the \`Automake' and \`Perl' packages.  Grab them from
-         any GNU archive site."
-    touch aclocal.m4
-    ;;
-
-  autoconf*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`${configure_ac}'.  You might want to install the
-         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
-         archive site."
-    touch configure
-    ;;
-
-  autoheader*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
-         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
-         from any GNU archive site."
-    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
-    test -z "$files" && files="config.h"
-    touch_files=
-    for f in $files; do
-      case $f in
-      *:*) touch_files="$touch_files "`echo "$f" |
-				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
-      *) touch_files="$touch_files $f.in";;
-      esac
-    done
-    touch $touch_files
-    ;;
-
-  automake*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
-         You might want to install the \`Automake' and \`Perl' packages.
-         Grab them from any GNU archive site."
-    find . -type f -name Makefile.am -print |
-	   sed 's/\.am$/.in/' |
-	   while read f; do touch "$f"; done
-    ;;
-
-  autom4te*)
-    echo 1>&2 "\
-WARNING: \`$1' is needed, but is $msg.
-         You might have modified some files without having the
-         proper tools for further handling them.
-         You can get \`$1' as part of \`Autoconf' from any GNU
-         archive site."
-
-    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
-    if test -f "$file"; then
-	touch $file
-    else
-	test -z "$file" || exec >$file
-	echo "#! /bin/sh"
-	echo "# Created by GNU Automake missing as a replacement of"
-	echo "#  $ $@"
-	echo "exit 0"
-	chmod +x $file
-	exit 1
-    fi
-    ;;
-
-  bison*|yacc*)
-    echo 1>&2 "\
-WARNING: \`$1' $msg.  You should only need it if
-         you modified a \`.y' file.  You may need the \`Bison' package
-         in order for those modifications to take effect.  You can get
-         \`Bison' from any GNU archive site."
-    rm -f y.tab.c y.tab.h
-    if test $# -ne 1; then
-        eval LASTARG="\${$#}"
-	case $LASTARG in
-	*.y)
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
-	    if test -f "$SRCFILE"; then
-	         cp "$SRCFILE" y.tab.c
-	    fi
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
-	    if test -f "$SRCFILE"; then
-	         cp "$SRCFILE" y.tab.h
-	    fi
-	  ;;
-	esac
-    fi
-    if test ! -f y.tab.h; then
-	echo >y.tab.h
-    fi
-    if test ! -f y.tab.c; then
-	echo 'main() { return 0; }' >y.tab.c
-    fi
-    ;;
-
-  lex*|flex*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified a \`.l' file.  You may need the \`Flex' package
-         in order for those modifications to take effect.  You can get
-         \`Flex' from any GNU archive site."
-    rm -f lex.yy.c
-    if test $# -ne 1; then
-        eval LASTARG="\${$#}"
-	case $LASTARG in
-	*.l)
-	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
-	    if test -f "$SRCFILE"; then
-	         cp "$SRCFILE" lex.yy.c
-	    fi
-	  ;;
-	esac
-    fi
-    if test ! -f lex.yy.c; then
-	echo 'main() { return 0; }' >lex.yy.c
-    fi
-    ;;
-
-  help2man*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-	 you modified a dependency of a manual page.  You may need the
-	 \`Help2man' package in order for those modifications to take
-	 effect.  You can get \`Help2man' from any GNU archive site."
-
-    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
-    if test -f "$file"; then
-	touch $file
-    else
-	test -z "$file" || exec >$file
-	echo ".ab help2man is required to generate this page"
-	exit $?
-    fi
-    ;;
-
-  makeinfo*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified a \`.texi' or \`.texinfo' file, or any other file
-         indirectly affecting the aspect of the manual.  The spurious
-         call might also be the consequence of using a buggy \`make' (AIX,
-         DU, IRIX).  You might want to install the \`Texinfo' package or
-         the \`GNU make' package.  Grab either from any GNU archive site."
-    # The file to touch is that specified with -o ...
-    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
-    if test -z "$file"; then
-      # ... or it is the one specified with @setfilename ...
-      infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
-      file=`sed -n '
-	/^@setfilename/{
-	  s/.* \([^ ]*\) *$/\1/
-	  p
-	  q
-	}' $infile`
-      # ... or it is derived from the source name (dir/f.texi becomes f.info)
-      test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
-    fi
-    # If the file does not exist, the user really needs makeinfo;
-    # let's fail without touching anything.
-    test -f $file || exit 1
-    touch $file
-    ;;
-
-  tar*)
-    shift
-
-    # We have already tried tar in the generic part.
-    # Look for gnutar/gtar before invocation to avoid ugly error
-    # messages.
-    if (gnutar --version > /dev/null 2>&1); then
-       gnutar "$@" && exit 0
-    fi
-    if (gtar --version > /dev/null 2>&1); then
-       gtar "$@" && exit 0
-    fi
-    firstarg="$1"
-    if shift; then
-	case $firstarg in
-	*o*)
-	    firstarg=`echo "$firstarg" | sed s/o//`
-	    tar "$firstarg" "$@" && exit 0
-	    ;;
-	esac
-	case $firstarg in
-	*h*)
-	    firstarg=`echo "$firstarg" | sed s/h//`
-	    tar "$firstarg" "$@" && exit 0
-	    ;;
-	esac
-    fi
-
-    echo 1>&2 "\
-WARNING: I can't seem to be able to run \`tar' with the given arguments.
-         You may want to install GNU tar or Free paxutils, or check the
-         command line arguments."
-    exit 1
-    ;;
-
-  *)
-    echo 1>&2 "\
-WARNING: \`$1' is needed, and is $msg.
-         You might have modified some files without having the
-         proper tools for further handling them.  Check the \`README' file,
-         it often tells you about the needed prerequisites for installing
-         this package.  You may also peek at any GNU archive site, in case
-         some other package would contain this missing \`$1' program."
-    exit 1
-    ;;
-esac
-
-exit 0
+# Propagate the correct exit status (expected to be 127 for a program
+# not found, 63 for a program that failed due to version mismatch).
+exit $st
 
 # Local variables:
 # eval: (add-hook 'write-file-hooks 'time-stamp)
diff --git a/transupp.c b/transupp.c
index 016f383..d0013cc 100644
--- a/transupp.c
+++ b/transupp.c
@@ -1,7 +1,7 @@
 /*
  * transupp.c
  *
- * Copyright (C) 1997-2011, Thomas G. Lane, Guido Vollbeding.
+ * Copyright (C) 1997-2012, Thomas G. Lane, Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -1076,7 +1076,7 @@
   if (need_workspace) {
     coef_arrays = (jvirt_barray_ptr *)
       (*srcinfo->mem->alloc_small) ((j_common_ptr) srcinfo, JPOOL_IMAGE,
-		SIZEOF(jvirt_barray_ptr) * info->num_components);
+	SIZEOF(jvirt_barray_ptr) * info->num_components);
     width_in_iMCUs = (JDIMENSION)
       jdiv_round_up((long) info->output_width,
 		    (long) info->iMCU_sample_width);
diff --git a/usage.txt b/usage.txt
index de9def7..88158d6 100644
--- a/usage.txt
+++ b/usage.txt
@@ -80,8 +80,9 @@
 	-rgb		Create RGB JPEG file.
 			Using this switch suppresses the conversion from RGB
 			colorspace input to the default YCbCr JPEG colorspace.
-			Use this switch in combination with the -block N
-			switch (see below) for lossless JPEG coding.
+			You can use this switch in combination with the
+			-block N switch (see below) for lossless JPEG coding.
+			See also the -rgb1 switch below.
 
 	-optimize	Perform optimization of entropy encoding parameters.
 			Without this, default encoding parameters are used.
@@ -175,6 +176,18 @@
 			decoders will be unable to view a SmartScale extended
 			JPEG file at all.
 
+	-rgb1		Create RGB JPEG file with reversible color transform.
+			Works like the -rgb switch (see above) and inserts a
+			simple reversible color transform into the processing
+			which significantly improves the compression.
+			Use this switch in combination with the -block N
+			switch (see above) for lossless JPEG coding.
+			CAUTION: A decoder with inverse color transform
+			support is required for this feature.  Reversible
+			color transform support is not yet widely implemented,
+			so many decoders will be unable to view a reversible
+			color transformed JPEG file at all.
+
 	-dct int	Use integer DCT method (default).
 	-dct fast	Use fast integer DCT (less accurate).
 	-dct float	Use floating-point DCT method.